| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This release adds a scoring window, where you can keep track of awards.
There were several major bugfixes.
|
|
Changelog for version xdx (2.2)
* This fixes compilation issues due to a missing time.h include statement.
Changelog for version xdx (2.1)
* French, Spanish and Polish translation updates.
* Allow zero length strings in the commands autologin entry. This will send
a plain return.
* Make sure we can fill in the callsign in the settings dialog.
* Use glib functions for calling external programs.
* CLX compatibility for auto-reconnect has been added.
Changelog for version xdx (2.0)
* Polish translations by Boguslaw Ciastek SQ5TB, thanks!
* A Dutch manual has been added.
* Updated gettext and automake version used.
* Install a .desktop file.
* Language files and manuals have been converted to UTF-8.
* The send widget is now a multiline text widget which allows entry of more
characters.
* Fonts used for DX messages (top window) and other messages (bottom window)
can now be changed through the preferences dialog.
* Linespacing added to the chat window, which makes it better readable.
* You can turn local echo off in the preferences dialog.
* The position of the divider between the chat and DX window is now saved.
* You can now use highlights in the chat window. Highlights will produce
colored text. Words to be highlighted can be set in the 'chat sidebar'.
When the checkbox next to the highlighted word is checked, xdx will search
for a highlight in all of the incoming text. When the checkbox is unchecked,
only the text after the prompt is searched.
* Checkboxes can be activated with ctrl-1 to ctrl-8. Entries can be focused
with alt-1 to alt-8.
* Alt-0 will switch focus to the send widget.
* Colors used for highlighting can be set in page 3 of the preferences dialog.
* The chat sidebar can be shown/hidden with F4.
* You can disable automatic scrolling of the chat window by clicking in the
window. Same for the DX window.
* Parse of the DX cluster output has been improved. Xdx would sporadically
miss DX messages.
* A new about dialog has been added.
* The manual now uses monospace font. It is activated with F1.
* Auto reconnect has been added. When activated through the settings menu,
xdx will try to reconnect when the connection is broken. This code is
somewhat experimental....
* To keep track of your connections a connection log is kept. It can be
viewed from the menu (Ctrl+l).
* Xdx can send a keepalive packet every 5 minutes, which is useful for
bad network connections. You must activate it in the settings dialog.
* Sound support has been added. When a highlight is active in the chat
window, a sound can be heard. You must use another program to play sound
and set it in the first page of the preferences dialog.
* Both ON4KST and DX-cluster prompts in the chat window are now colorized.
The callsign is bold.
* All of the colors in the chat window are now configurable.
* When wwv data is saved, files with "tab seperated values" will be saved
for every WWV host. See the MANUAL for the data format.
|
|
tlf-0.9.30
==========
Bug fixes:
- exchange needed at least 1 character in dxped mode
RTTY miniterm changed to display line feeds (reading formatted texst is easier)
RTTY now sends linefeeds before and after the macro.
tlf-0.9.29
==========
Bug fixes:
- Date display error
- Spurious character error
- Malloc free error in socket.c
I also included Fabian's patch to searchlog.c for testing...I like it.
tlf-0.9.28
==========
Bug fixes (country indication did not work, wrong mults file for arrldx_dx).
Added interface to gMFSK to enable RTTY contesting.
Added new parameters for the logcfg.dat file:
GMFSK (use gMFSK as an output device)
RTTYMODE (start tlf in RTTY mode)
DIGIMODEM=/home/youruser/gmfsk_autofile
|
|
GRIG 0.7.2:
- Fixed bug that caused wrong handling of RF gain, IF shift, MIC gain,
and compressor controls (bug #1613622).
- Give volume level control higher priority to avoid jumpy behaviour
(bug #1616926).
GRIG 0.7.1:
- A bug that caused installation to fail has been fixed (#1523367).
GRIG 0.7.0:
- Added receiver and transmitter level controls.
- Fixed bug that caused installation errors when using autoconf 2.59e.
- Pixmaps are now installed to /usr/local/share/pixmaps/grig instead of
/usr/local/share/grig/pixmaps by default (related to the above bug).
GRIG 0.6.0:
- Save and restore RIG state.
- RF power meter scale is now functional with ranges of 5, 10, 50, 100
and 500 watts. There is currently a bug, which causes the meter needle
to jump up when switching between RX/TX.
- Fixed bug, which caused the frequency reading to flicker between the
current value and a previously set value (bug #1388342). Same bug was
found for the PTT and POWER controls, too.
- Fixed bug, which gave the error message "Can not find VFO list for this
rig! Bug in backend?" if the rig did not have any of the rig_set_vfo or
rig_get_vfo functions (bug #1440876).
- Better error messages when a command fails to execute.
- Fixed bug, which blocked the debug handler to properly filter messages
coming from grig (hamlib messages were filtered correctly).
GRIG 0.5.0:
- Requires Gtk+ 2.6 and Hamlib 1.2.5
- Added VFO and SPLIT controls.
- Special rig functions: LOCK, ...
- Use own debug handler for both hamlib and grig messages
and format debug messages so that become easier to analyse.
- New debug message window, which can be used to analyse
previously saved debug messages.
- Modified shutdown procedure to wait until daemon actually
finishes instead of using a fixed length timeout.
- Disable POWER and PTT buttons by default (can be enabled
via the command line).
- Optimisation of the daemon process allowing faster reaction
when PTT is toggled.
- The mode selector combo only shows modes, which are supported
by the rig.
- Fixed erroneous detection of set/get level availability
(bug #1266068).
- Fixed incorrect handling of empty ATT, PREAMP and tuning
step lists in the Radio Info window (bug #1266071).
- Fixed a bug, which caused grig to display WIDE instead of
NORMAL passband when the rig has no wide passband.
- Optimised S-meter dynamics.
- Better detection of frequency ranges and resolutions.
- Corrected various mistakes in the manual page.
- Various minor improvements to the user interface.
- Several minor changes to support wintendo builds.
|
|
* Improved TS570 functionality
* Improved Argonaut V functionality
* New models: IC7000, G313i/G313e
* Many Icom, Kenwood, and Tentec fixes.
* Build system fixes
|
|
p5-DBD-mysql-4.00, p5-Log-Dispatch-2.16, rt3-3.6.3, wesnoth-1.2.
|
|
|
|
unrealircd-3.2.6.
|
|
|
|
|
|
cocoon-2.1.10, gst-plugins0.10-bad-0.10.4, gst-plugins0.10-good-0.10.5,
hylafax-5.0.2, kdbg-2.0.5, net-snmp-5.4, spl-1.0pre3 [pkg/35308],
stella-2.3, uim-1.3.1, zsnes-1.50.
|
|
libpreludedb-0.9.11, nano-2.0.2, prelude-lml-0.9.8.1,
prelude-manager-0.9.7, ratpoison-1.4.1.
|
|
- firefox, seamonkey, thunderbird (thanks, ghen)
- kronolith (thanks, adrianp)
- rxvt-unicode (thanks, martin).
|
|
digikam-0.9.0, enlightenment-0.16.8.5, evince-0.7, glade-3.1.4,
glib2-2.12.5, gocr-0.43, grig-0.7.2, pcre-7.0, sylpheed-devel-2.3.0rc,
uim-1.3.0 [pkg/35297], wxGTK-2.8.
|
|
|
|
|
|
sysutils/iwi-firmware contains the old 2.3 version as used by iwi(4) on
current NetBSD and DragonFly releases.
sysutils/iwi-firmware3 contains the new version 3.0 as updated by skrll@
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
+ ja-trac-0.10.3.1
|
|
|
|
+ xorg-cf-files-1.0.2
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
issue but I can't find any actual explanation of what changed. Sadly,
it is hard to reverse engineer binaries. :(
|
|
mercurial-0.9.3, qalculate-0.9.5, tnftpd-20061217.
|
|
|
|
|
|
|
|
|
|
p5-Scalar-List-Utils-1.19, p5-XML-RSS-1.22, tailor-0.9.27.
|
|
|
|
|
|
|
|
|
|
|
|
|
