summaryrefslogtreecommitdiff
path: root/emulators/libspectrum
AgeCommit message (Collapse)AuthorFilesLines
2014-01-01Recursive PKGREVISION bump for libgcrypt-1.6.0 shlib major bump.wiz2-3/+4
2013-06-14Update to 1.1.1:wiz3-23/+6
2013-05-24 Philip Kendall <philip-fuse@shadowmagic.org.uk> * libspectrum 1.1.1 released. * Decreased libtool version to allow binaries built against libspectrum 1.0.0 to run with libspectrum 1.1.1. 2013-05-18 Philip Kendall <philip-fuse@shadowmagic.org.uk> * libspectrum 1.1.0 released. * Support for Spectranet in snapshots (Philip Kendall). * Support for Cheetah SpecDrum in snapshots (Fredrick Meunier). * Support reading PZX files (Fredrick Meunier). * Support for the TZX set signal level block (Fredrick Meunier). * Various minor bug fixes/improvements: * Add support for detecting POK files (Sergio Baldoví). * Advertise support for bzip2 compressed and wav files (Sergio Baldoví). * Drop support for GLib version 1.x (Alberto Garcia). * Add support for audiofile 0.3.x (Alberto Garcia). * Load all snapshot RAM pages for machines with more than 128k (Fredrick Meunier; thanks, ketmar). * Support more SZX 1.5 features (Fredrick Meunier). * Modernise autoconf support (Sergio Baldoví).
2013-05-31Bump all packages for perl-5.18, thatwiz1-2/+2
a) refer 'perl' in their Makefile, or b) have a directory name of p5-*, or c) have any dependency on any p5-* package Like last time, where this caused no complaints.
2012-10-03Bump all packages that use perl, or depend on a p5-* package, orwiz1-2/+2
are called p5-*. I hope that's all of them.
2012-10-03Drop superfluous PKG_DESTDIR_SUPPORT, "user-destdir" is default these days.asau1-3/+1
2012-09-15recursive bump from libffi shlib major bumpobache2-4/+4
(additionaly, reset PKGREVISION of qt4-* sub packages from base qt4 update)
2012-03-03Recursive bump for pcre-8.30* (shlib major change)wiz2-4/+4
2012-02-06Revbump forwiz2-4/+4
a) tiff update to 4.0 (shlib major change) b) glib2 update 2.30.2 (adds libffi dependency to buildlink3.mk) Enjoy.
2012-01-13Recursive bump from audio/libaudiofile, x11/qt4-libs and x11/qt4-tools ABI bump.obache2-4/+4
2011-04-22recursive bump from gettext-lib shlib bump.obache2-3/+4
2011-02-27Fix building on Mac OS X when using a SDKadam2-1/+17
2010-12-20Changes 1.0.0:adam3-7/+11
* New end of tape flag * AF and AF' were swapped when reading and writing SZX files * Support for Fuller Box and Melodik (and similar AY interfaces) in snapshots * Support for Opus Discovery in snapshots * Support for the NTSC 48K Spectrum * Support for stereo sound files * Add proper support for +2A/+3, Pentagon and Scorpion in .z80 files * Various fixes for compiling with Visual Studio 6 * Various minor bug fixes/improvements: * Looser signature checks for .dsk files * --without-(bzip2|zlib) options to configure for Gentoo and similar distributions * Handle querying the block length for turbo and pure data blocks with 0 length * Fix loading of Warajevo TAPs with raw samples * Fail sensibly if file decompression fails * Remove various unused variables, initialisations etc
2009-06-14Remove @dirrm entries from PLISTsjoerg1-2/+1
2009-03-20Simply and speed up buildlink3.mk files and processing.joerg1-13/+6
This changes the buildlink3.mk files to use an include guard for the recursive include. The use of BUILDLINK_DEPTH, BUILDLINK_DEPENDS, BUILDLINK_PACKAGES and BUILDLINK_ORDER is handled by a single new variable BUILDLINK_TREE. Each buildlink3.mk file adds a pair of enter/exit marker, which can be used to reconstruct the tree and to determine first level includes. Avoiding := for large variables (BUILDLINK_ORDER) speeds up parse time as += has linear complexity. The include guard reduces system time by avoiding reading files over and over again. For complex packages this reduces both %user and %sys time to half of the former time.
2009-01-29Fix missing operator in last commit.joerg1-2/+2
2009-01-29Fix DESTDIR.joerg1-3/+3
2009-01-15Changes 0.5.0.1:adam2-6/+8
* Loosen signature checks for .dsk files to allow files not strictly compliant with the specification to work.
2008-12-04Changes 0.5.0:adam2-6/+6
* Memory management change: memory allocation functions now abort on failure. Leads to simpler code both internally and for users of the library. * Support for tape acceleration. * IDE improvements to allow DivIDE to support FATware. * New API to deal with flagging automatic snapshots in RZX files. * New function to get length (time) of a tape block. * 128K SNA files are now treated as being for the Pentagon 128 rather than the Spectrum 128. * SNA files now written out correctly. * Handle MDR write protection flag correctly. * Allow MDR images with bad checksums to load (the error will be handled by the If1 ROM). * Support saving custom ROMs in SZX snapshots. * Support for DivIDE, Kempston mouse and the simple IDE interface in SZX snapshots. * Allow building without libgcrypt. * Amiga and MorphOS compilation fixes. * Don't produce empty libraries to fix build process on OpenSolaris. * Remove deprecated functions. * Tweak timings for TS2068.
2008-01-24Changes 0.4.0:adam2-6/+6
* Add support for loading from WAV files * Add support for CSW tape files * Tweak timings for TC2048 and TC2068 * Add support for the +D in z80 and szx snapshots * Add Pentagon 512/1024 support * Allow Amiga version to decompress files with xfdmaster.library * Allow MorphOS version to use xfdmaster.library * Various other bugfixes
2007-05-12Changes 0.3.0.1:adam2-6/+6
* Avoid crash when reading an invalid TZX file (thanks, crabfists). * Export the TZX Generalized Data Block functions when building a Win32 DLL. * Distribute the hacking/ directory. * Remove warning when building from CVS.
2007-04-13Changes 0.3.0:adam2-9/+7
* Support for RZX rollback, including having snapshots and multiple input recording blocks in input recording files. * Improved IDE emulation. * Support for microdrive images. * TZX Generalized Data Block support. * Support for Z80Em and CSW tape files. * Support for the TS2068. * Support for connected joystick information in snapshots. * Add interrupt length to timing information. * Routines to add and remove a block from a tape image. * Minor feature enhancements. * Minor bugfixes.
2006-07-08Change the format of BUILDLINK_ORDER to contain depth information as well,jlam1-2/+2
and add a new helper target and script, "show-buildlink3", that outputs a listing of the buildlink3.mk files included as well as the depth at which they are included. For example, "make show-buildlink3" in fonts/Xft2 displays: zlib fontconfig iconv zlib freetype2 expat freetype2 Xrender renderproto
2006-07-08Track information in a new variable BUILDLINK_ORDER that informs usjlam1-1/+2
of the order in which buildlink3.mk files are (recursively) included by a package Makefile.
2006-06-07Needs pkg-config.joerg1-2/+2
2006-04-12Aligned the last line of the buildlink3.mk files with the first line, sorillig1-2/+2
that they look nicer.
2006-04-06Over 1200 files touched but no revisions bumped :)reed1-3/+3
RECOMMENDED is removed. It becomes ABI_DEPENDS. BUILDLINK_RECOMMENDED.foo becomes BUILDLINK_ABI_DEPENDS.foo. BUILDLINK_DEPENDS.foo becomes BUILDLINK_API_DEPENDS.foo. BUILDLINK_DEPENDS does not change. IGNORE_RECOMMENDED (which defaulted to "no") becomes USE_ABI_DEPENDS which defaults to "yes". Added to obsolete.mk checking for IGNORE_RECOMMENDED. I did not manually go through and fix any aesthetic tab/spacing issues. I have tested the above patch on DragonFly building and packaging subversion and pkglint and their many dependencies. I have also tested USE_ABI_DEPENDS=no on my NetBSD workstation (where I have used IGNORE_RECOMMENDED for a long time). I have been an active user of IGNORE_RECOMMENDED since it was available. As suggested, I removed the documentation sentences suggesting bumping for "security" issues. As discussed on tech-pkg. I will commit to revbump, pkglint, pkg_install, createbuildlink separately. Note that if you use wip, it will fail! I will commit to pkgsrc-wip later (within day).
2006-02-05Recursive revision bump / recommended bump for gettext ABI change.joerg2-4/+4
2005-07-16Get rid of USE_PERL5. The new way to express needing the Perl executablejlam1-3/+2
around at either build-time or at run-time is: USE_TOOLS+= perl # build-time USE_TOOLS+= perl:run # run-time Also remove some places where perl5/buildlink3.mk was being included by a package Makefile, but all that the package wanted was the Perl executable.
2005-05-22For packages that use GNU configure, don't bother adding "TOOL"jlam1-2/+1
variables into CONFIGURE_ENV if the new tools framework already takes care of adding them automatically.
2005-04-11Remove USE_BUILDLINK3 and NO_BUILDLINK; these are no longer used.tv1-2/+1
2005-02-23Add RMD160 digests to the SHA1 onesagc1-1/+2
2004-10-03Libtool fix for PR pkg/26633, and other issues. Update libtool to 1.5.10tv2-2/+4
in the process. (More information on tech-pkg.) Bump PKGREVISION and BUILDLINK_DEPENDS of all packages using libtool and installing .la files. Bump PKGREVISION (only) of all packages depending directly on the above via a buildlink3 include.
2004-09-22Mechanical changes to package PLISTs to make use of LIBTOOLIZE_PLIST.jlam1-5/+1
All library names listed by *.la files no longer need to be listed in the PLIST, e.g., instead of: lib/libfoo.a lib/libfoo.la lib/libfoo.so lib/libfoo.so.0 lib/libfoo.so.0.1 one simply needs: lib/libfoo.la and bsd.pkg.mk will automatically ensure that the additional library names are listed in the installed package +CONTENTS file. Also make LIBTOOLIZE_PLIST default to "yes".
2004-07-20Changes 0.2.2:adam4-12/+10
* Support for Scorpion ZS 256, Spectrum +3e, and Spectrum SE * Support for .hdf hard disk images * Support for the ZXATASP and ZXCF interfaces * Support for saving the Timex DOCK and EXROM in .szx snapshots * Support for saving the Interface II state
2004-06-26this needs libbz2, so include archivers/bzip2/buildlink3.mk.grant1-1/+2
2004-03-18Fix serious bug where BUILDLINK_PACKAGES wasn't being ordered properlyjlam1-3/+2
by moving the inclusion of buildlink3.mk files outside of the protected region. This bug would be seen by users that have set PREFER_PKGSRC or PREFER_NATIVE to non-default values. BUILDLINK_PACKAGES should be ordered so that for any package in the list, that package doesn't depend on any packages to the left of it in the list. This ordering property is used to check for builtin packages in the correct order. The problem was that including a buildlink3.mk file for <pkg> correctly ensured that <pkg> was removed from BUILDLINK_PACKAGES and appended to the end. However, since the inclusion of any other buildlink3.mk files within that buildlink3.mk was in a region that was protected against multiple inclusion, those dependencies weren't also moved to the end of BUILDLINK_PACKAGES.
2004-03-05Reorder location and setting of BUILDLINK_PACKAGES to match templatejlam1-8/+7
buildlink3.mk file in revision 1.101 of bsd.buildlink3.mk.
2004-02-25Not used any more.minskim1-23/+0
2004-02-25Add new buildlink3.mk.minskim1-0/+24
2004-02-25bl3ifyminskim1-6/+6
2004-02-25Bump PKGREVISION due to the update of libgcrypt.minskim1-1/+2
2004-02-14LIBTOOL_OVERRIDE and SHLIBTOOL_OVERRIDE are now lists of shell globsjlam1-2/+1
relative to ${WRKSRC}. Remove redundant LIBTOOL_OVERRIDE settings that are automatically handled by the default setting in bsd.pkg.mk.
2004-02-13Changes 0.2.1:adam4-20/+23
* Transparent reading of bzipped and gzipped files. * Add support for writing emulator custom data to .rzx and .szx files. * Update to the more recent version of gcrypt; version 1.1.42 or later is now required. * Link libspectrum against gcrypt, glib and zlib; this means that client applications no longer need to do this. * Support for 'the last instruction was an EI' in the snapshot code. * Routines to check the versions of libspectrum and gcrypt in use. * Write .rzx files with a version number of 0.12 if we're not signing the data; improves backward compatability. * Fix a segfault when dealing with .slt files. * QNX6 compilation fixes.
2003-10-14Style nits.salo1-6/+9
2003-10-14Perl is needed for build.salo1-1/+5
Should fix problem seen in the latest hubertf's bulk-build.
2003-10-02Changes 0.2.0.1: fix a possible segfault in rzx.cadam3-8/+7
2003-09-22install documentation. bump PKGREVISION.dillo2-2/+11
2003-09-16libspectrum is a library designed to make the input and output of someadam5-0/+52
ZX Spectrum emulator files slightly easier. It is intended to be usable on Unix variants, Win32 and MacOSX. Changes 0.2.0: * libspectrum 0.2.0 released. * Various data structures (snapshots, tapes, tape blocks) which were previously directly accessible are now accessible only via wrapper functions. This should improve future binary compatability, but at the cost of breaking it for this release (Philip Kendall). * Change the API for reading/writing snapshots to be more general. The old API still exists, but is deprecated (Philip Kendall). * Support for reading .szx, .zxs, .sp, .snp and +D snapshots (Philip Kendall). * Support for writing .szx and .sna snapshots (Philip Kendall). * Support for reading Warajevo .tap files (Fredrick Meunier). * Support for signing RZX files with digital signatures (Philip Kendall). * Timing fixes for the TC2048 and TC2068 (Fredrick Meunier). * Fix reading of 128K .sna snapshots (Philip Kendall). * New capabilities for the Timex dock, and built-in Sinclair and Kempston joysticks (Fredrick Meunier). * Use <stdint.h> to give us the <n>-bit types if it's available (Philip Kendall). * Ignore links to external snapshots from RZX files, rather than trying to interpret the path as a snapshot (Philip Kendall).
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-14 20:04:17 +0000