| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"Looks good" from wiz@ and obache@.
ChangeLog for 0.13.0 is not updated but there is a list in announcement:
This release consists of over 2,500 commits from 145 contributors.
Some major features were added in this release including:
- vhost-net: kernel-accelerating network backend for virtio devices (using KVM)
- qmp: significant improvements covering most monitor commands
- vnc: introduction of new encodings that dramatically improve bandwidth
(part of GSoC project)
- ivshmem: new shared memory device allowing multiple guests to share
a memory region
- mips: introduction of fulong mini-pc
- virtio-9p: introduction of a paravirtual file system passthrough mechanism
- hpet: many enhancements
- target-s390: support for s390 usermode emulation
- many more features and bug fixes
A special note about QMP support in 0.13.0. QMP is still considered
experimental in 0.13.0. There are no plans to change the protocol
in an incompatible way but there are likely to be missing features.
ChangeLog for version 0.12.5:
- audio/alsa: Handle SND_PCM_STATE_SETUP in alsa_poll_handler
- block: Handle multiwrite errors only when all requests have completed
- block: Fix early failure in multiwrite
- vpc: Use bdrv_(p)write_sync for metadata writes
- vmdk: Use bdrv_(p)write_sync for metadata writes
- qcow2: Use bdrv_(p)write_sync for metadata writes
- qcow: Use bdrv_(p)write_sync for metadata writes
- block: Add bdrv_(p)write_sync
- qcow2: Restore L1 entry on l2_allocate failure
- block/vdi: Fix image opening and creation for odd disk sizes
- block/vpc: Fix conversion from size to disk geometry
- qcow2: Remove abort on free_clusters failure
- vmdk: Fix COW
- qcow2: Fix creation of large images
- vmdk: fix double free
- qemu-options: add documentation for stdio signal=on|off
- target-arm : fix parallel saturated subtraction implementation
- target-arm : fix thumb2 parallel add/sub opcode decoding
- target-arm: fix addsub/subadd implementation
- target-i386: fix xchg rax,r8
- block/vvfat.c: fix warnings with _FORTIFY_SOURCE
- audio/alsa: Spelling typo (paramters)
- target-mips: fix DINSU instruction
- Correct definitions for FD_CMD_SAVE and FD_CMD_RESTORE
- qcow2: Fix corruption after error in update_refcount
- qcow2: Fix corruption after refblock allocation
- block: Fix multiwrite with overlapping requests
- qcow2: Fix error handling in l2_allocate
- qcow2: Clear L2 table cache after write error
- ide: Fix ide_dma_cancel
- usb-bus: fix no params
- Avoid crash on '-usbdevice <device>' without parameters
- Fix -usbdevice crash
- Fix multiboot compilation
- Fix missing symbols in .rel/.rela.plt sections
- target-ppc: fix RFI by clearing some bits of MSR
- Fix typo in balloon help
- arm_timer: fix oneshot mode
- arm_timer: reload timer when enabled
- qemu-sockets: avoid strlen of NULL pointer
- block: fix aio_flush segfaults for read-only protocols (e.g. curl)
- virtio-blk: fix barrier support
- block: fix sector comparism in multiwrite_req_compare
- pci: irq_state vmstate breakage
- qemu-img: use the heap instead of the huge stack array for win32
Pkgsrc changes:
patch-aa
patch-ao
patch-ba
patch-de
patch-ed
- lifted from previous (some adjustments per upstream changes)
patch-ab
- removed (looks similar fix applied in upstream)
patch-dd
- adjust configure for location of man page dir (as previous)
- fix detection for arm hosts
patch-dk
- removed (looks no longer applicable due to reorganized upstream)
patch-ee
- remove old e1000.c fix (pulled up to upstream)
- pull block/sheepdog.c build fix on *BSD hosts from upstream
patch-ef
patch-eg
patch-eh
patch-ei
- workaround for conflicts with SSP read() macro in NetBSD's <ssp/unistd.h>
(PR lib/43832: ssp causes common names to be defines)
patch-ej
- pull build/warning fixes in ui/vnc-enc-tight.c from upstream
patch-ek
- pull ATA PIO fix (by jakllsch@) from upstream
- pull warning fix from upstream
patch-el
- workaround for missing C99 FP macro on netbsd-4
(PR pkg/42899, but od(1) fixes for netbsd-4 not included)
patch-em
patch-en
- build fix on NetBSD/arm host using gcc-4.1.3
(built qemu binary on NetBSD/hpcarm host fails though)
patch-eo
patch-ep
patch-er
patch-es
- pull ESP SCSI DMA fixes (that might affect sparc) from upstream
patch-eq
- pull ESP SCSI DMA fixes from upstream
- disable broken ARC JAZZ floppy that causes hang on MIPS NT 4.0 guest
Makefile
- bump DISTNAME
- add makeinfo to USE_TOOLS
XXX: gets "qemu-doc.texi:7: warning: unrecognized encoding name `UTF-8'."
- adjust SUBST_FILES.qaudio per upstream changes
- enable nbd support *BSD per upstream update
PLIST
distinfo
- update per each file
|
|
default process limits. Bump PKGREVISION.
|
|
Changes: assorted bugfixes
|
|
tap backend work on NetBSD (NetBSD uses an ioctl to get the tap name).
patch-ab: add support for the "select without ATN" to the emulated
esp device. NetBSD's esp(4) uses this command and aborts after a timeout.
While there fix the homepage URL.
Now NetBSD/sparc 5.0.1 boots and runs fine in qemu-system-sparc on a
NetBSD/amd64 host.
Bump pkgrevision.
|
|
version 0.10.6:
- e1000: ignore reset command (Kevin Wolf)
- fix VNC memory allocation (Stefan Weil)
- fix raw_pread_aligned return value (Christoph Hellwig)
- allow monitor interaction when using -incoming exec: (Chris Lalancette)
- fix -net socket,listen (Jan Kiszka)
- live migration: don't send gratuitous packets all at once (Gleb Natapov)
- serial: fix lost characters after sysrq (Jason Wessel)
- Fix prototype of zfree (Stefan Weil)
- Handle EINTR with exec: migration (Uri Lublin)
- Delete io-handler before closing fd after migration (Uri Lublin)
- Fix qemu_aio_flush (Andrea Arcangeli)
- lsi53c895a: Implement additional registers (Sebastian Herbszt)
- virtio-blk: fix warning (Gerd Hoffman)
- i386: fix cpu reset (Nitin Kamble)
- kvm: fix irq injection into full queue (Jan Kiszka)
- Prevent CD-ROM eject while device is locked (Mark McLoughlin)
- Fix screen dump with blank screen (Eduardo Habkost)
- Fix memory leak with cpu_unregister_map_client (Isaku Yamahata)
- Fix memory leak in SDL (Jan Kiszka)
- Fix build on OS X 10.4 (John Arbuckle)
- Fix leak of vlan clients after hot remove (Mark McLoughlin)
- Fix migration after hot remove with eepro100 (Mark McLoughlin)
- Don't start a VM after failed migration if stopped (Anthony Liguori)
- Fix live migration under heavy IO load (Glauber Costa)
- Honor -S on incoming migration (Paolo Bonzini)
- Reset HPET config register on reset (Beth Kon)
- Reset PS2 keyboard/mouse on reset (Dinesh Subraveti)
version 0.10.5:
- kvm: trim unsupported cpu features from cpuid (Avi Kivity)
- kvm: provide a better error message for -smp > 1 (Mark McLoughlin)
- Remove initrd printfs (Richard Jones)
- Initial variables found by valgrind (Jean-Christophe Dubois)
- Fix -initrd with > 4GB guests (Glauber Costa)
- Fix busy loop on live migration for certain platforms (Uri Lublin)
- Remove GCC 3.x requirements from docs (Hollis Blanchard)
- ETRAX: fixes for kernel command line, ethernet address, bmi (Edgar Iglesias)
- CRIS: Fix bmi (Edgar Iglesias)
- Fix bounce buffer errors (Avi Kivity)
- Fix regression in -kernel (Anthony Liguori)
version 0.10.4:
- Improve block range checks to remove integer overflow (Kevin Wolf)
- e1000: do not re-init PCI config space 0 (Amit Shah)
- fix AIO deletion race (Alex Graf)
- reset option roms on reboot (Glauber Costa)
- fix qcow2 corruption in cluster freeing (Gleb Natapov)
- Enable power button event generation (Gleb Natapov)
version 0.10.3:
- fix AIO cancellations (Avi Kivity)
- fix live migration error path on incoming
- avoid SEGV on pci hotplug failure (Chris Wright)
- fix serial option in -drive
- support DDIM for option roms (Glauber Costa)
- avoid fork/exec on pre-2.6.27 kernels with KVM (Jan Kiszka)
- block-vpc: don't silently create smaller images than requested (Kevin Wolf)
- Fix non-ACPI timer interrupt routing (Beth Kon)
- hpet: fix emulation of HPET_TN_SETVAL (Jan Kiszka)
- kvm: fix cpuid initialization (Jan Kiszka)
- qcow2: fix corruption on little endian hosts (Kevin Wolf)
- avoid leaing memory on hot unplug (Mark McLoughlin)
- fix savevm/migration after hot unplug (Mark McLoughlin)
- Fix keyboard mapping on newer Xords with non-default keymaps (balrog)
- Make PCI config status register read-only (Anthony Liguori)
- Fix crash on resolution change -> screen dump -> vga redraw (Avi Kivity)
version 0.10.2:
- fix savevm/loadvm (Anthony Liguori)
- live migration: fix dirty tracking windows (Glauber Costa)
- live migration: improve error propogation (Glauber Costa)
- qcow2: fix image creation for > ~2TB images (Chris Wright)
- hotplug: fix error handling for if= parameter (Eduardo Habkost)
- qcow2: fix data corruption (Nolan Leake)
- virtio: fix guest oops with 2.6.25 kernels (Rusty Russell)
- SH4: add support for -kernel (Takashi Yoshii, Aurelien Jarno)
- hotplug: fix closing of char devices (Jan Kiszka)
- hotplug: remove incorrect check for device name (Eduardo Habkost)
- enable -k on win32 (Herve Poussineau)
- configure: use LANG=C for grep (Andreas Faerber)
- fix VGA regression (malc)
version 0.10.1:
- virtio-net: allow masking of notifications on empty queue (Alex Williamson)
- e1000: fix rx descriptor low threshold logic (Alex Willaimson)
- x86 tcg: add NULL checks to lsl instruction (Jan Kiszka)
- kvm vga: fix screen corruption with -std-vga and Windows (Avi Kivity)
- kvm vga: fix screen corruption with Ubuntu installations (Glauber Costa)
- virtio-net: check right return size on sg list (Alex Williamson)
- Make qemu_announce_self handle holes (live migration after hotplug)
(Marcelo Tosatti)
- Revert r6804-r6808 (qcow2 allocation info). This series of changes added
a high cost to startup for large qcow2 images (Anthony Liguori)
- qemu-img: fix help message (Aurelien Jarno)
- Fix build for non-default installs of SDL (Anthony Liguori)
- Fix race condition in env->interrupt_request. When using TCG and a dynticks
host timer, this condition could cause TCG to get stuck in an infinite
loop (Aurelien Jarno)
- Fix reading encrypted hard disk passwords during early startup (Jan Kiszka)
- Fix encrypted disk reporting in 'info block' (Jan Kiszka)
- Fix console size with tiny displays (MusicPal) (Jan Kiszka)
- Improve error handling in bdrv_open2 (Jan Kiszka)
- Avoid leaking data in mux'ed character devices (Jan Kiszka)
- Fix initial character device reset (no banner in monitor) (Jan Kiszka)
- Fix cpuid KVM crash on i386 host (Lubomir Rintel)
- Fix SLES10sp2 installation by adding ISTAT1 register to LSI SCSI emulation
(Ryan Harper)
version 0.10.0:
- TCG support (No longer requires GCC 3.x)
- Kernel Virtual Machine acceleration support
- BSD userspace emulation
- Bluetooth emulation and host passthrough support
- GDB XML register description support
- Intel e1000 emulation
- HPET emulation
- VirtIO paravirtual device support
- Marvell 88w8618 / MusicPal emulation
- Nokia N-series tablet emulation / OMAP2 processor emulation
- PCI hotplug support
- Live migration and new save/restore formats
- Curses display support
- qemu-nbd utility to mount supported block formats
- Altivec support in PPC emulation and new firmware (OpenBIOS)
- Multiple VNC clients are now supported
- TLS encryption is now supported in VNC
- MIPS Magnum R4000 machine (Hervé Poussineau)
- Braille support (Samuel Thibault)
- Freecom MusicPal system emulation (Jan Kiszka)
- OMAP242x and Nokia N800, N810 machines (Andrzej Zaborowski)
- EsounD audio driver (Frederick Reeve)
- Gravis Ultrasound GF1 sound card (Tibor "TS" Schütz)
- Many, many, bug fixes and new features
|
|
- TFTP booting from host directory (Anthony Liguori, Erwan Velu)
- Tap device emulation for Solaris (Sittichai Palanisong)
- Monitor multiplexing to several I/O channels (Jason Wessel)
- ds1225y nvram support (Herve Poussineau)
- CPU model selection support (J. Mayer, Paul Brook, Herve Poussineau)
- Several Sparc fixes (Aurelien Jarno, Blue Swirl, Robert Reif)
- MIPS 64-bit FPU support (Thiemo Seufer)
- Xscale PDA emulation (Andrzej Zaborowski)
- ColdFire system emulation (Paul Brook)
- Improved SH4 support (Magnus Damm)
- MIPS64 support (Aurelien Jarno, Thiemo Seufer)
- Preliminary Alpha guest support (J. Mayer)
- Read-only support for Parallels disk images (Alex Beregszaszi)
- SVM (x86 virtualization) support (Alexander Graf)
- CRIS emulation (Edgar E. Iglesias)
- SPARC32PLUS execution support (Blue Swirl)
- MIPS mipssim pseudo machine (Thiemo Seufer)
- Strace for Linux userland emulation (Stuart Anderson, Thayne Harbaugh)
- OMAP310 MPU emulation plus Palm T|E machine (Andrzej Zaborowski)
- ARM v6, v7, NEON SIMD and SMP emulation (Paul Brook/CodeSourcery)
- Gumstix boards: connex and verdex emulation (Thorsten Zitterell)
- Intel mainstone II board emulation (Armin Kuster)
- VMware SVGA II graphics card support (Andrzej Zaborowski)
|
|
|
|
patch to let this build on systems without POSIX AIO.
version 0.9.0:
- Support for relative paths in backing files for disk images
- Async file I/O API
- New qcow2 disk image format
- Support of multiple VM snapshots
- Linux: specific host CDROM and floppy support
- SMM support
- Moved PCI init, MP table init and ACPI table init to Bochs BIOS
- Support for MIPS32 Release 2 instruction set (Thiemo Seufer)
- MIPS Malta system emulation (Aurelien Jarno, Stefan Weil)
- Darwin userspace emulation (Pierre d'Herbemont)
- m68k user support (Paul Brook)
- several x86 and x86_64 emulation fixes
- Mouse relative offset VNC extension (Anthony Liguori)
- PXE boot support (Anthony Liguori)
- '-daemonize' option (Anthony Liguori)
|
|
|
|
keep the struct on the rest)
|
|
Changes:
- better BIOS translation and HDD geometry auto-detection
- user mode networking bug fix
- undocumented FPU ops support
- Cirrus VGA: support for 1280x1024x[8,15,16] modes
- 'pidfile' option
- .dmg disk image format support (Johannes Schindelin)
- keymaps support (initial patch by Johannes Schindelin)
- big endian ARM support (Lennert Buytenhek)
- added generic 64 bit target support
- x86_64 target support
- initial APIC support
- MMX/SSE/SSE2/PNI support
- PC parallel port support (Mark Jonckheere)
- initial SPARC64 support (Blue Swirl)
- SPARC target boots Linux (Blue Swirl)
- armv5te user mode support (Paul Brook)
- ARM VFP support (Paul Brook)
- ARM "Angel" semihosting syscalls (Paul Brook)
- user mode gdb stub support (Paul Brook)
- Samba 3 support
- initial Cocoa support (Pierre d'Herbemont)
- generic FPU emulation code
- Virtual PC read-only disk image support (Alex Beregszaszi)
pkgsrc changes:
Applied Hubert Feyrer workaround for the x86_64 target (patch-aw).
|
|
doesn't crash any more. Patch found at
http://lists.gnu.org/archive/html/qemu-devel/2004-09/msg00271.html
|
|
Changes:
- Mac OS X port (Pierre d'Herbemont)
- Virtual console support
- Better monitor line edition
- New block device layer
- New 'qcow' growable disk image support with AES encryption and
transparent decompression
- VMware 3 and 4 read-only disk image support (untested)
- Support for up to 4 serial ports
- TFTP server support (Magnus Damm)
- Port redirection support in user mode networking
- Support for not executable data sections
- Compressed loop disk image support (Johannes Schindelin)
- Level triggered IRQ fix (aka NE2000 PCI performance fix) (Steve
Wormley)
- Fixed Fedora Core 2 problems (now you can run qemu without any
LD_ASSUME_KERNEL tricks on FC2)
- DHCP fix for Windows (accept DHCPREQUEST alone)
- SPARC system emulation (Blue Swirl)
- Automatic Samba configuration for host file access from Windows.
- '-loadvm' and '-full-screen' options
- ne2000 savevm support (Johannes Schindelin)
- Ctrl-Alt is now the default grab key. Ctrl-Alt-[0-9] switches to
the virtual consoles.
- BIOS floppy fix for NT4 (Mike Nordell, Derek Fawcus, Volker Ruppert)
- Floppy fixes for NT4 and NT5 (Mike Nordell)
- NT4 IDE fixes (Ben Pfaf, Mike Nordell)
- SDL Audio support and SB16 fixes (malc)
- ENTER instruction bug fix (initial patch by Stefan Kisdaroczi)
- VGA font change fix
- VGA read-only CRTC register fix
|
|
Holland.
QEMU is a FAST! processor emulator using dynamic translation to achieve
good emulation speed, QEMU has two operating modes:
* Full system emulation. In this mode, QEMU emulates a full system
(for example a PC), including a processor and various peripherals.
It can be used to launch different Operating Systems without rebooting
the PC or to debug system code.
* User mode emulation (Linux host only). In this mode, QEMU can launch
Linux processes compiled for one CPU on another CPU. It can be used
to launch the Wine Windows API emulator or to ease cross-compilation
and cross-debugging.
--
It's nice to see NetBSD/x86 running perfectly with QEMU!
|
