| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Several changes are involved since they are all interrelated. These
changes affect about 1000 files.
The first major change is rewriting bsd.builtin.mk as well as all of
the builtin.mk files to follow the new example in bsd.builtin.mk.
The loop to include all of the builtin.mk files needed by the package
is moved from bsd.builtin.mk and into bsd.buildlink3.mk. bsd.builtin.mk
is now included by each of the individual builtin.mk files and provides
some common logic for all of the builtin.mk files. Currently, this
includes the computation for whether the native or pkgsrc version of
the package is preferred. This causes USE_BUILTIN.* to be correctly
set when one builtin.mk file includes another.
The second major change is teach the builtin.mk files to consider
files under ${LOCALBASE} to be from pkgsrc-controlled packages. Most
of the builtin.mk files test for the presence of built-in software by
checking for the existence of certain files, e.g. <pthread.h>, and we
now assume that if that file is under ${LOCALBASE}, then it must be
from pkgsrc. This modification is a nod toward LOCALBASE=/usr. The
exceptions to this new check are the X11 distribution packages, which
are handled specially as noted below.
The third major change is providing builtin.mk and version.mk files
for each of the X11 distribution packages in pkgsrc. The builtin.mk
file can detect whether the native X11 distribution is the same as
the one provided by pkgsrc, and the version.mk file computes the
version of the X11 distribution package, whether it's built-in or not.
The fourth major change is that the buildlink3.mk files for X11 packages
that install parts which are part of X11 distribution packages, e.g.
Xpm, Xcursor, etc., now use imake to query the X11 distribution for
whether the software is already provided by the X11 distribution.
This is more accurate than grepping for a symbol name in the imake
config files. Using imake required sprinkling various builtin-imake.mk
helper files into pkgsrc directories. These files are used as input
to imake since imake can't use stdin for that purpose.
The fifth major change is in how packages note that they use X11.
Instead of setting USE_X11, package Makefiles should now include
x11.buildlink3.mk instead. This causes the X11 package buildlink3
and builtin logic to be executed at the correct place for buildlink3.mk
and builtin.mk files that previously set USE_X11, and fixes packages
that relied on buildlink3.mk files to implicitly note that X11 is
needed. Package buildlink3.mk should also include x11.buildlink3.mk
when linking against the package libraries requires also linking
against the X11 libraries. Where it was obvious, redundant inclusions
of x11.buildlink3.mk have been removed.
|
|
|
|
|
|
Some BUILDLINK_RECOMMENDED bumps done also.
(If I missed any, please let me know -- and let me know a good
way to automate this.)
|
|
in the process. (More information on tech-pkg.)
Bump PKGREVISION and BUILDLINK_DEPENDS of all packages using libtool and
installing .la files.
Bump PKGREVISION (only) of all packages depending directly on the above
via a buildlink3 include.
|
|
All library names listed by *.la files no longer need to be listed
in the PLIST, e.g., instead of:
lib/libfoo.a
lib/libfoo.la
lib/libfoo.so
lib/libfoo.so.0
lib/libfoo.so.0.1
one simply needs:
lib/libfoo.la
and bsd.pkg.mk will automatically ensure that the additional library
names are listed in the installed package +CONTENTS file.
Also make LIBTOOLIZE_PLIST default to "yes".
|
|
|
|
by moving the inclusion of buildlink3.mk files outside of the protected
region. This bug would be seen by users that have set PREFER_PKGSRC
or PREFER_NATIVE to non-default values.
BUILDLINK_PACKAGES should be ordered so that for any package in the
list, that package doesn't depend on any packages to the left of it
in the list. This ordering property is used to check for builtin
packages in the correct order. The problem was that including a
buildlink3.mk file for <pkg> correctly ensured that <pkg> was removed
from BUILDLINK_PACKAGES and appended to the end. However, since the
inclusion of any other buildlink3.mk files within that buildlink3.mk
was in a region that was protected against multiple inclusion, those
dependencies weren't also moved to the end of BUILDLINK_PACKAGES.
|
|
|
|
Tiff is backward compatible, but was broken on amd64 platform
so this makes sure new tiff is used.
|
|
automake 1.4-p5 rather than automake 1.4). Update distinfo and use
DIST_SUBDIR to avoid breaking systems with previously downloaded distfiles.
No PKGREVISION bump as no functional change.
|
|
|
|
|
|
- s/USE_X11BASE/USE_X11/
- new MASTER_SITES
|
|
|
|
dependency bumps.
|
|
have it be automatically included by bsd.pkg.mk if USE_PKGINSTALL is set
to "YES". This enforces the requirement that bsd.pkg.install.mk be
included at the end of a package Makefile. Idea suggested by Julio M.
Merino Vidal <jmmv at menta.net>.
|
|
and use bsd.pkg.install.mk to copy it to PKG_SYSCONFDIR.
Bump PKGREVISION to 2.
|
|
|
|
buildlink2.mk files back into the main trunk. This provides sufficient
buildlink2 infrastructure to start merging other packages from the
buildlink2 branch that have already been converted to use the buildlink2
framework.
|
|
all dependencies on packages depending on "png" which contain shared
libraries, all for the (imminent) update to the "png" package.
[List courtesy of John Darrow, courtesy of "bulk-build".]
|
|
|
|
redefines about which buildlink.mk files would care is BUILDLINK_X11_DIR,
which points to the location of the X11R6 hierarchy used during building.
If x11.buildlink.mk isn't included, then BUILDLINK_X11_DIR defaults to
${X11BASE} (set in bsd.pkg.mk), so its value is always safe to use. Remove
the ifdefs surrounding the use of BUILDLINK_X11_DIR in tk/buildlink.mk and
revert changes to move x11.buildlink.mk before the other buildlink.mk files.
|
|
use X11_BUILDLINK_MK as a test value. Generally just reordering the
inclusions so that x11.buildlink.mk comes before the other buildlink.mk
files will make everthing work.
|
|
to ${X11BASE} in the header and library search paths into references to
${LOCALBASE}/share/x11-links. These packages should now be strongly-
buildlinked regardless of whether xpkgwedge is installed.
Changes well-tested on NetBSD-1.5X/i386 with and without xpkgwedge and
lightly-tested on NetBSD-1.5.1/alpha without xpkgwedge.
|
|
installation directory in case the package isn't installed.
|
|
BUILDLINK_PREFIX.<pkgname>. This allows buildlink to find X11BASE packages
regardless of whether they were installed before or after xpkgwedge was
installed. Idea by Alistair Crooks <agc@pkgsrc.org>.
|
|
o add buildlink.mk file for use by other packages
Fixes enlightenment build problem noted by David Brownlee <abs@netbsd.org>
in private mail.
|
|
|
|
+ move the patch digest/checksum values from files/patch-sum to distinfo
|
|
|
|
out of date - it was based on a.out OBJECT_FMT, and added entries in the
generated PLISTs to reflect the symlinks that ELF packages uses. It also
tried to be clever, and removed and recreated any symbolic links that were
created, which has resulted in some fun, especially with packages which
use dlopen(3) to load modules. Some recent changes to our ld.so to bring
it more into line with other Operating Systems also exposed some cracks.
+ Modify bsd.pkg.mk and its shared object handling, so that PLISTs now contain
the ELF symlinks.
+ Don't mess about with file system entries when handling shared objects in
bsd.pkg.mk, since it's likely that libtool and the BSD *.mk processing will
have got it right, and have a much better idea than we do.
+ Modify PLISTs to contain "ELF symlinks"
+ On a.out platforms, delete any "ELF symlinks" from the generated PLISTs
+ On ELF platforms, no extra processing needs to be done in bsd.pkg.mk
+ Modify print-PLIST target in bsd.pkg.mk to add dummy symlink entries on
a.out platforms
+ Update the documentation in Packages.txt
With many thanks to Thomas Klausner for keeping me honest with this.
|
|
|
|
Add a new USE_LIBTOOL definition that uses the libtool package instead of
pkglibtool which is now considered outdated.
USE_PKGLIBTOOL is available for backwards compatibility with old packages
but is deprecated for new packages.
|
|
|
|
+ delete redundant PKGNAME definition
+ use pkglibtool, and install the .la archives
+ add comment to PLIST
+ add patch-sum file
|
|
|
|
package into ${X11BASE}".
Replace all occurrences of BUILD_USES_X11 with USE_X11. This means "use X11
headers and libraries to build this package".
|
|
|
|
|
|
|
|
Color Font rendering library for X11R6
|
