summaryrefslogtreecommitdiff
path: root/ham
AgeCommit message (Collapse)AuthorFilesLines
2015-09-12Update the list of filenames for REPLACE_PYTHON. This will fix the packagingmef1-0/+2
problem on gnuradio-ctrlport. Thanks gdt@ for report.
2015-09-08Corrrction to PLIST, thanks gdt@ for reportmef1-1/+16
2015-09-06Update to 2.5.0mef2-7/+6
--------------- xdx-2.5: Function keys F1 - F8 send often used commands to the cluster. Close dialog when Ctl-Q is used. Update manual page to current conventions.
2015-09-06Update 3.3 to 3.4mef3-8/+8
----------------- Version 3.4: I fixed a bug in the code that implements the modified GS (scaling) card. In NEC2 the GS card scales all of the structure, but in Xnec2c I modified the code so that it is possible to specify a range of tag numbers to apply scaling to only. When a GS card follows a GX card, selective scaling doesn't work correctly because a symmetric structure is created. If you are using a GS card, it may be better to avoid specifying a tag number range, just in case the bug fix is not complete.
2015-09-06Update 3.8.5 to 3.9.0mef3-9/+8
--------------------- ## 003.009.000 * X300: Updated DAC ctrl, FPGA toolchain is now entirely Vivado, improved master clock controls, added ADC self-cal capability, prepared for revisions 7 and 8, fixed flow control issue which could cause device to hang when receiving too many overruns * B2XX: Auto clock rate setting, added PID/VID pairs to support all B2XX- and derivatives, added temperature sensor, improved DC offset and IQ imbalance correction, added AGC support, support for FPGPIO connector on Rev6+ boards, full clock range support, updated FX3 firmware (side-channel logging capabilities, updated tx voltage swing, better configurability), default tick rate now 16 MHz, added B200mini support * E3XX: Added temperature sensor, FPGA toolchain is now entirely Vivado, improved DC offset and IQ imbalance correction, added AGC support, improved FPGA capture interface robustness for RFIC, make frame sizes configurable, replaced GPS control code with gpsd interfacing capabilities * Octoclock: Fixed bootloader + ethernet capabilities * Compilers: Supported MSVC versions are now 2012, 2013, 2015 (dropped 2010 support), added MinGW capabilities * Documentation: Many minor fixes and updates, merged all the info from code.ettus.com * UHD: Added sid_t, CHDR-specific transports now get their own (un)packer codes, fixed a lot of compiler warnings, added filter API (currently available for AD9361 frontend), added soft-register API, replaced Cheetah with Mako, full Py3k compliance, updated images downloader tool (now is one tool for all devices), CMake minimum version is now 2.8, refactored general AD9361 peripheral management, refactored most core control management, added usb_error type (used by B2xx devices), better exception handling at runtime, added C wrapper API, new dependency: python-requests * C API: Added to UHD (wraps C++ calls in C) * multi_usrp: Added normalized gain setters/getters, IQ imbalance + DC offset correction API, filter API * Converters: Converter symbols now exported, better logging, removed ORC dependency, added u8 converters * Examples: Whitespace- and other cleanup, multi-channel fixes for some examples * Utils: Read more property tree types from the command line * Tools: kitchen sink updated, added mega_fft
2015-09-02Update 2.0.12 to 2.0.13mef2-7/+6
----------------------- - Changes for xlog version 2.0.13 - 2015-apr-19 * Fixed date in cabrillo3 output to be: yyyy-mm-dd * Fixed date in EDI output to be: yymmdd * Fixed QSORecords in EDI output * Updated cty.dat to 20150420 (cty-2505) * Fixed Bug #44547: Added JT9 modes * Fixed Bug #44259: broken dupe checking
2015-09-02(pkgsrc)mef2-7/+11
- set LICENSE= gnu-gpl-v2 (upstream) - Update 0.9.30 to 0.9.31.2 ---------------------------- 2007-12-21 rein couperus <rein@couperus.com> * changed searchlog.c ('possible calls') 2007-12-18 rein couperus <rein@couperus.com> * changed cluster_bg.c to fix possible buffer overflow * changed searchlog.c -> compare now starts at beginning of callsign.
2015-09-02Reduce hardcoding of GITHUB_TAG, refering PKGVERSION_NOREVmef1-2/+2
2015-09-01Update gnuradio-* 3.7.6 to 3.7.8mef31-1513/+952
2015-09-01(pkgsrc)mef9-65/+53
- (File/REPLACE_PYTHON) delete non existent files - (Makefile) * CONF_FILES setup deleted (etc files no longer installed, but found at examples directory now) * MASTER_SITES updated * ${DESTDIR} is removed from one of CMAKE_ARGS -DGR_LIBRARY_DIR=${DESTDIR}${PREFIX}/lib (upstream) - Update gnuradio-core from 3.7.6 to 3.7.8 --------------------- ChangLog 3.7.7 to 3.7.8 is not known Release Note for 3.7.7 is at http://gnuradio.org/redmine/projects/gnuradio/wiki/ChangeLogV3_7_7
2015-08-18Bump all packages that depend on curses.bui* or terminfo.bui* since theywiz1-2/+2
might incur ncurses dependencies on some platforms, and ncurses just bumped its shlib. Some packages were bumped twice now, sorry for that.
2015-08-17Bump PKGREVISION for ncurses shlib bump.wiz1-1/+2
2015-08-14(pkgsrc)mef7-4133/+1703
- Drop two patches, seems included (upstream) - Update 3.7.2 to 3.8.5 Change Log for Releases ============================== ## 003.008.005 * E3xx: Added support for battery-based E3xx device (E312), get_freq() for network mode, fixed GPS time initialization bug * AD9361-based devices: Fixed frequency readback bug * B200: Fixed DCM issues, better loopback failure handling, fix erroneous warning for custom clock rates * X3x0: Better warnings for clock reate / ref freq * multi_usrp: Added define for GPIO capabilities (enables exposure in GNU Radio) * UHD: sc16->sc16 SSE converter * Manual: Multiple minor updates, FPGA manual improvements, * Build System: Fixed builds on some Windows platforms, removed stray prints ## 003.008.004 * B200: Fixed EEPROM writing bug, updated images for B200 Rev5/6 * E300: GPS antenna power defaults to staying on, GPS time used as default if available * UBX: PDF frequency fix on X300 * USRP2: Bugfix that allows latest UHD to work with USRP2 * Documentation: Many fixes for E300 section, added FPGA manual ## 003.008.003 * UBX: Fixed phase synchronization issues (Related changes: Change X300 daughterboard frequency, increase N210 FIFO depth) * Fixed many compiler warnings * B200: Fixed timing issues, fixed tick rate issue, stabilized operations at high clock rates * X300: Improved phase alignment across devices * CMake: Build fixes * E300: Flow control fix ## 003.008.002 * CMake: Introducing named versions for dev branches, enable static libs, * E300: Docs updates, compat number bump, VCTCXO updates, more status bits for ref locking, fixed serial number length fix, RSSI Sensor * B200: RSSI sensor * AD9361: Better handling of different interpolation rates in FIR, fix for gain value truncation, removed gain value offset * UBX: Added drivers * Manual/Docs: Numerous updates, minimum compiler versions now specified, * Converters: Multiple fixes for sc12 * Examples: Fixes to txrx_loopback_to_file * Path handling vastly improved, made more consistent * Minor UHD fixes ## 003.008.001 * B2x0: Fixed PLL settings, Fixed external ref selection, serialized streamer setup (thread-safety) * X3x0: Fixed flow control issue, improved DAC ctrl + init logic, Fixed I/Q alignment issue * Generation-3 devices: Fixed LED registers * UHD: Improved tuning logic for manual tunes * Tools: Multiple kitchen sink fixes, coloured output * Examples: Multiple bugfixes (multi-channel ops) * Docs/Manual: Multiple fixes, E310 panel images ## 003.008.000 * Added E310 support * B200/B210: Moved AD9361 controls from firmware to host * Added several tools: ZPU dissector, improved CHDR dissector, kitchen sink, B200/B210 USB debugging utility, latency measurement tool. * Reorganized firmware/ directory structure. Refactored some firmware. * Removed FPGA sources, is now in own repository (submoduled). * Cleaned up command line arguments for some tools * Added math namespace, plus a unified float comparison infrastructure * Fixed tuning-related bugs * Moved manual over to Doxygen, also several manual bug fixes and amendments * Added many missing virtual destructors (less build warnings) * Added support for NI-RIO 14.0 * X300 fixes: Not found over PCIe with no eth interfaces * CMake improvements: Now comes with own UHDConfig.cmake and example to build standalone UHD apps, build fixes on Apple, interoperability with GNU Radio * OctoClock fixes and improvements: Ethernet initialization, external ref detection, stability fixes, host driver (UHD can now talk to OctoClock) * Examples: Improved GPIO example, rx_samples_to_file * Bumped minimum Boost version to 1.46 ## 003.007.003 * Fixed examples * Removed compiler warnings * Fixed CBX LO settings (FRAC truncation) * Fixed build issues for out-of-tree tools for some distros * Fixed some logging strings (SBX, GPSDO) * Improved logging (speedups, removed unnecessary cycles) * Added output sync for DAC reference clocks on X300 * Multiple FPGA improvements, as well as upgrade of build env * Added support for B200 vs B210 discovery
2015-08-14(Just) gitubify.mef2-11/+14
2015-08-10std::complex::imag() and std::complex::real() are not lvalues.joerg2-1/+22
2015-08-09Restore PKGNAME after githubification.wiz2-11/+10
Remove unnecessary DIST_SUBDIR.
2015-08-09(Just) githubify.mef2-10/+9
2015-07-23Update to 3.22.13mef2-6/+6
----------------- =Version 3.22.13= 2015-07-18 David Freese <iam_w1hkj@w1hkj.com> 7bdf051: FSQ bug fix 9319676: XMLRPC commands
2015-07-21Update 3.22.10 to 3.22.12mef2-6/+6
------------------------- =Version 3.22.12= 2015-07-18 David Freese <iam_w1hkj@w1hkj.com> 1579ef6: FSQ heard parser f61f7d7: fsq modem dfb9318: FreqControl focus e477621: trx exit =Version 3.22.11= 7d881bf: flrig xmlrpc update 2015-06-07 Kamal Mostafa <kamal@whence.com> 40a6dcb: BUILD_{DATE,USER,HOST}
2015-06-13Update 3.22.08 to 3.22.10mef2-7/+6
------------------------- =Version 3.22.10= 2015-06-01 David Freese <iam_w1hkj@w1hkj.com> dfc430f: FTextView styles bug =Version 3.22.09= 2015-05-28 Kamal Mostafa <kamal@whence.com> dac5bf4: Fl_Text_Display 2015-04-28 David Freese <iam_w1hkj@w1hkj.com> c34a613: Cabrillo/Export dialogs
2015-06-12Recursive PKGREVISION bump for all packages mentioning 'perl',wiz6-10/+12
having a PKGNAME of p5-*, or depending such a package, for perl-5.22.0.
2015-04-27Deal with C++11 user defined string literals. Add missing includes.joerg4-1/+41
2015-04-26(pkgsrc)mef9-104/+22
- Drop patches, upstream seems to fix the problems. - (flxmlrpc is not supported yet, to be added later) (upstream) - Update 3.22.07 to 3.22.08 ------------------------- =Version 3.22.08= 2015-04-23 David Freese <iam_w1hkj@w1hkj.com> 2bda963: Analysis 967e7c5: rx/tx queues b5aa6a3: flxmlrpc 2015-04-16 Dave Freese <w1hkj@bellsouth.net> 28839d7: call focus 2015-04-14 David Freese <iam_w1hkj@w1hkj.com> a4d4faa: 599 update 41beca0: US units 91ab73f: olivia cxx a45006d: fldigi-shell ee19668: Write log 8d4f0ef: Config dialog
2015-04-25Recursive revbump following MesaLib update, categories g through n.tnn18-30/+36
2015-04-23Don't use ambigious NULL to mean a missing value.joerg2-1/+24
2015-04-17Revbump after updating devel/boost-libsadam24-26/+48
2015-04-17Update 3.2 to 3.2mef2-6/+6
(from doc/xnec2c.html) ----------------- Version 3.3: I fixed a bug that was in the code that reads the commands from the NEC2 input file, where xnec2c would crash with a segmentation fault when the FR card was after the RP card. Also modified the Strtod() function to avoid freeing the end pointer before it was used, causing problems.
2015-04-03Update 3.22.05 to 3.22.07mef2-7/+6
------------------------- =Version 3.22.07= 2015-04-01 David Freese <iam_w1hkj@w1hkj.com> b3dea10: Macro edit 97d02a7: Multi-psk 9942993: Vista SignaLink driver c79bfd7: Image update 3c264e2: Command line 68f88ee: SSB default signal 5ca7182: Digiscope resize b522d83: FSF address =Version 3.22.06= 2015-03-21 Robert Stiles <kk5vd@yahoo.com> fe27da9: UTF-8 Rx display 2015-03-21 David Freese <iam_w1hkj@w1hkj.com> 15ca512: 8psk modes e48c2fe: Macro Editor Fonts 2424904: R-L channel input e5148c0: QSY documentation f219812: Sound File Generate 35ef2ed: devices_text mutex 2015-02-18 Robert Stiles <kk5vd@yahoo.com> aedc628: Bug fixes/Comments cbc9975: Check IO and delay prior to autoexec prgs 003707f: Rename local variables 2015-02-17 David Freese <iam_w1hkj@w1hkj.com> edee64a: pa names 4ba7b78: Main dialog resize 279115c: Rig Viewer Frame 3eb8e41: Code merge/PortAudio Script return error b15f5d9: Update translation files 31e231b: Exit trx loop 2015-02-08 Robert Stiles <kk5vd@yahoo.com> 1155d8d: Documentation Update 814bed3: Configure Script Engine 2015-02-08 David Freese <iam_w1hkj@w1hkj.com> ad52857: Macros fffc57c: French po 375e98f: CW QSK Tune 3ebf3db: flrig xml client 423ac70: TimeOn button 3041a20: QSY clickable
2015-03-07(pkgsrc)mef10-34/+203
- Following patch added to give sphinx-build name (with ${PYVERSSUFFIX) attached) gnuradio-core/patches/patch-cmake_Modules_FindSphinx.cmake - Depending doxygen-1.8.9.1nb1 now - gnuradio-doxygen is updated 3.7.5.2nb1 to 3.7.6 (upstream) - Update gnuradio-* from 3.7.5.2 to 3.7.6 --------------------------------------- GNU Radio releases 3.7.6 and 3.7.5.2 are available for download: (several tens of lines omitted for URL and List of contributors) Release 3.7.5.2 is a bug-fix only maintenance patch following 3.7.5.1, and will be the last one for the 3.7.5 release. Release 3.7.6 incorporates all these fixes and adds significant new features.
2015-03-01Depend on the py-docutils version that has versioned binaries.wiz1-2/+2
2015-02-28Provide help in finding rst2html.joerg1-1/+4
2015-02-21Recursive revbump from audio/pulseaudio.ryoon1-1/+2
2015-02-17Update to 0.1.4mef2-7/+6
--------------- (From http://git.osmocom.org/gr-osmosdr/log/) 2014-11-04 update version to 0.1.4 Dimitri Stolnikov 2014-11-03 bladeRF: Don't fail out until 3 consecutive errors have occurred Jon Szymaniak 2014-11-03 bladeRF: Default num_transfers to min(32, num_buffers/2) Jon Szymaniak 2014-11-03 bladeRF: Removed unused bladerf_metadata parameter from rx/tx calls Jon Szymaniak 2014-10-21 hackrf: update copyright for SSE/AVX routines Dimitri Stolnikov 2014-10-21 hackrf: disable AMP gain stage by default to protect it from damage Dimitri Stolnikov 2014-10-21 source/sink: don't discover devices if already specified via args Dimitri Stolnikov
2015-02-14fix trivial typo in commentdbj1-2/+2
2015-02-07Drop trailing '/' from DEPENDS lines. Found by Bernhard Riedel.tnn1-2/+2
2015-01-31Update PLIST and options.mk for doxygen 1.8.9.1.mef3-21/+15
2015-01-31Following file is on gnuradio-core, so delete from gnuradio-doxygenmef1-2/+1
share/examples/gnuradio/conf.d/gr-audio-oss.conf
2015-01-30Fix another problem on PLIST for gnuradio-*.mef1-3/+6
Add PLIST.oss to be anonther removing PLIST other than gnuradio-core packages. (One more, move the line location of comment lines next to the line to explain)
2015-01-30Fix PLIST problem. When assigning value to PLIST_SRC, should take care whole ↵mef1-2/+2
thing.
2015-01-28- Re-packaged due to devel/doxygen update 1.8.8 to 1.8.9.1mef2-16/+37
- PKGREVISION++
2015-01-27icons are not installed on Darwin, so omit them from PLISTdbj2-7/+13
2015-01-27add awk script to fixup 0b constants not handled by all compilersdbj2-1/+43
2015-01-27don't set UHD_LIBRARIES and UHD_INCLUDE_DIRS in CMAKE_ARGS on Darwindbj1-1/+7
The explicit use of .so in the shared lib causes a problem. I've also set UHD_DIR in the environment in the UHD buildlink3.mk file which should make these two CMAKE_ARGS unnecessary
2015-01-27set UHD_DIR in the environment since gnuradio-uhd uses it as a hint to find uhddbj1-1/+5
2015-01-27Add PLIST support for Darwin audiodbj2-12/+19
fix Nocore.mk to handle PLIST.Darwin and use _PLIST_SHLIB_AWK to fix shared library names
2015-01-27Don't enable oss if OSS_TYPE is nonedbj4-7/+11
2015-01-26missed a variable substitutiondbj1-2/+2
2015-01-26on second thought, decouple shared library patchlevel from ${PKGREVISION}dbj2-6/+8
2015-01-26handle undefined PKGREVISION in shared library namingdbj1-3/+3
2015-01-26plist shared library handling (shlib-dylib.awk, at least) only allowsdbj2-3/+11
numbers in shared library versions. Instead of "0.0git", use PKGREVISION as the library patchlevel.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 06:51:43 +0000