summaryrefslogtreecommitdiff
path: root/mail/qmail
AgeCommit message (Collapse)AuthorFilesLines
2005-08-19Convert DJB_ERRNO_HACK to a "djbware-errno-hack" option availableschmonz2-5/+3
in all packages using djbware.mk. For now, keep the same default, avoiding PKGREVISION bumps.
2005-07-19Distinguish package-specific options as such, supporting the old namesschmonz1-40/+18
via PKG_OPTIONS_LEGACY_OPTS until after the next branch.
2005-07-15Drop distinction between PKGSRC_USE_TOOLS and USE_TOOLS by makingjlam1-2/+2
PKGSRC_USE_TOOLS go away. There is now only a single USE_TOOLS variable that specifies all of the tools we need to build/run the package.
2005-07-14Author updated the description of "panther.patch" to mention itschmonz1-4/+4
works on Tiger as well. No change to the patch itself.
2005-05-31Packages have no business modifying PKG_DEFAULT_OPTIONS -- it's adillo1-5/+6
user settable variable. Set PKG_SUGGESTED_OPTIONS instead. Also, make use of PKG_OPTIONS_LEGACY_VARS. Reviewed by wiz.
2005-05-22Remove USE_GNU_TOOLS and replace with the correct USE_TOOLS definitions:jlam1-2/+2
USE_GNU_TOOLS -> USE_TOOLS awk -> gawk m4 -> gm4 make -> gmake sed -> gsed yacc -> bison
2005-05-19The patch for the "nullenvsender" option is no longer available: itsschmonz2-17/+4
author considers it no longer relevant. Remove the option.
2005-05-16Note that expr is used by this package.jlam1-2/+2
2005-05-07Since share/examples/qmail/boot is under ${PREFIX}, create it withschmonz1-4/+4
INSTALLATION_DIRS rather than MAKE_DIRS. Calculate QUEUE_EXTRALEN in a more readable fashion.
2005-04-30Use :sh instead of != to assign QUEUE_EXTRALEN to defer evalutation ofjlam1-3/+3
command until it is referenced within subst.mk's make targets. This avoids needing ${EXPR} and ${WC} in the top-level make.
2005-04-14Remove duplicate netqmail lines.wiz1-4/+1
Reported by Robert Elz in PR 29973.
2005-04-11Remove USE_BUILDLINK3 and NO_BUILDLINK; these are no longer used.tv1-2/+1
2005-04-10Add RMD160 sums for all the optional patches.schmonz1-5/+18
2005-04-10If the "tls" option is enabled, append the additional targets toschmonz1-2/+2
INSTALL_TARGET, rather than replacing them. This had been broken with the introduction of djbware.mk.
2005-03-29Update URL to the patch for "nullenvsender" option, and correctlyschmonz1-3/+3
define the variable containing the patch URL for the "qregex" option. Problems noted by zuntum.
2005-03-23Remove package-specific workarounds for the glibc-vs-errno conflict.schmonz1-5/+1
The "netqmail" PKG_OPTION to qmail is no longer enabled on Linux by default; if you were relying on that, set it explicitly.
2005-03-23Take advantage of mk/djbware.mk.schmonz1-11/+4
2005-03-13In packages with djb-style compile scripts, properly enquote ${CC}schmonz1-3/+3
and ${CFLAGS}. This fixes the build of net/djbdns, as well as any other of these packages passing down PKG_SYSCONFDIR via CFLAGS, as well as being more generally correct for arbitrary user-defined CFLAGS. Suggested by jlam. For consistency across djbware in pkgsrc: * In math/djbfft's and sysutils/daemontools's do-configure targets, remove leading @ from ${ECHO} lines; from the former, also remove unneeded single quotes from one such line. * Rename net/publicfile's pre-build and sysutils/service-config's post-patch targets to do-configure. * In sysutils/checkpassword's do-configure target, reorder creation of conf-cc, conf-ld, and conf-home. All of the affected packages have been verified to compile. XXX These packages probably have enough build goo in common to XXX warrant an mk/djbware.mk. I'll investigate this post-freeze.
2005-02-24Add RMD160 digests.agc1-1/+2
2005-01-26Update URL to Paul Jarc's realrcptto patch.schmonz1-2/+2
2004-12-21Update my email address.schmonz1-1/+1
2004-12-21With the "viruscan" option, enable Russ Nelson's patch to SMTP-rejectschmonz4-6/+36
messages with MIME attachments that match certain signatures, as well as Jeremy Kitchen's patch that causes such rejections to be logged. Bump PKGREVISION.
2004-12-20The value of QUEUE_EXTRA can be a local user instead of an alias.schmonz1-3/+4
Clarify admonishment to the reader accordingly.
2004-12-03Rename ALL_TARGET to BUILD_TARGET for consistency with other *_TARGETs.wiz1-2/+2
Suggested by Roland Illig, ok'd by various.
2004-11-28Remove pre-buildlink and post-buildlink as part of getting pkgsrc readyjlam1-2/+2
for pkgsrc-2004Q4. The "buildlink" phase was removed for the last branch, and this is the final cleanup. "post-buildlink" is now "post-wrapper".
2004-08-27Replace RPATH_FLAG with LINKER_RPATH_FLAG and COMPILER_RPATH_FLAG,jlam1-2/+2
which are the full option names used to set rpath directives for the linker and the compiler, respectively. In places were we are invoking the linker, use "${LINKER_RPATH_FLAG} <path>", where the space is inserted in case the flag is a word, e.g. -rpath. The default values of *_RPATH_FLAG are set by the compiler/*.mk files, depending on the compiler that you use. They may be overridden on a ${OPSYS}-specific basis by setting _OPSYS_LINKER_RPATH_FLAG and _OPSYS_COMPILER_RPATH_FLAG, respectively. Garbage-collect _OPSYS_RPATH_NAME and _COMPILER_LD_FLAG.
2004-08-25Missed a spot in the netqmail removal: options.mk is in the currentschmonz1-2/+2
directory, and nothing else is using this Makefile anymore.
2004-08-23Rename the "smtpauth" option to "sasl" to be consistent with otherschmonz1-8/+8
MTAs' options, since it causes qmail-smtpd to offer several SASL mechanisms. No need to preserve the meaning of the old option, as it was introduced less than a day ago.
2004-08-22Change the way that legacy USE_* and FOO_USE_* options are convertedjlam1-2/+4
into the bsd.options.mk framework. Instead of appending to ${PKG_OPTIONS_VAR}, it appends to PKG_DEFAULT_OPTIONS. This causes the default options to be the union of PKG_DEFAULT_OPTIONS and any old USE_* and FOO_USE_* settings. This fixes PR pkg/26590.
2004-08-22Put ${WRKSRC} in a more natural location.schmonz1-3/+4
2004-08-22Using bsd.options.mk, add several common build-time options. Theschmonz9-151/+291
complete list: badrcptto bigdns darwin netqmail nullenvsender outgoingip qregex realrcptto smtpauth syncdir tls This obviates the need for a separate netqmail package. As a result, reintegrate Makefile.common into Makefile, and simplify a handful of definitions. If you used the netqmail package, set PKG_OPTIONS.qmail to "netqmail bigdns" to build with the same patches as before. Note that most of these options result in patches being applied, and that any given combination of patches may not apply cleanly. If there's a combination you need that doesn't work, or build options you need that aren't available, let me know. On Darwin, the "darwin" option is set by default, as it's needed in order to build. The patch includes <nameser8_compat.h>, which is present on Panther, but not on older systems. We provide a buildlink stand-in where needed. On Linux, the "netqmail" option is set by default, as with recent glibc it's necessary to #include <errno.h> in order to build. On other platforms, no options are set by default. Bump PKGREVISION.
2004-08-02Cosmetic only: tab out the first few lines to the same indentationschmonz1-12/+12
level as the rest of the file.
2004-08-02Add a "README.pkgsrc" document and refer to it in MESSAGE. Rideschmonz4-12/+45
the PKGREVISION bump from 12 hours ago.
2004-08-02The Mac OS X Panther patch needs a different PATCH_DIST_STRIP fromschmonz1-1/+3
the netqmail patch.
2004-08-02Remove add-on scripts and config files from the qmail and netqmailschmonz13-466/+46
packages. They now simply compile and install qmail and its prerequisites. (The add-on scripts and config files will be revivified as a separate qmail-run package. Thus, QMAIL_AUTOCONFIG is no longer needed.) The user is notified at install time that one popular, well-regarded way to enable qmail is to follow the directions in "Life with qmail", and that another way is to install the qmail-run package. These changes, based on discussion with Charles Cazabon, are intended to make life easier for the helpful people on the qmail mailing list by clearly marking custom add-ons as such. Other changes: Since netqmail is a tarball containing the qmail tarball plus the netqmail bits, we can use it for both packages and share more logic between the two packages: MASTER_SITES, DISTINFO_FILE, WRKSRC, and the post-extract target. Now that there's one place to put the distinfo, add Eben Pratt's simple patch to build and install on Mac OS X 10.3 (the patch is not applied on other OSes). Bump PKGREVISION of both packages.
2004-07-21Short story:schmonz31-898/+777
1) Mostly conform to hier(7) and honor PKG_SYSCONFDIR. 2) Follow more closely Dave Sill's "Life with qmail" (LWQ). 3) Add a bunch of features to the rc.d scripts. 4) Remove some (but not all) obstacles to binary packaging. 5) Introduce QMAIL_AUTOCONFIG, QMAIL_QUEUE_DIR, and QMAIL_QUEUE_EXTRA. 6) Enable pkgviews installation. 7) Bump PKGREVISION. Long story: 1) Mostly conform to hier(7) and honor PKG_SYSCONFDIR. Based on a January 1997 post by mrg to the qmail list: prior to installation, we create symlinks in ${QMAILDIR} that point into ${LOCALBASE} or ${PKG_SYSCONFDIR}, causing installation to place files in those locations while allowing the canonical /var/qmail paths to continue to work. The notable deviation from hier(7) is that even though some binaries ought to go in sbin, they've all been lumped into bin for simplicity. Pleasant effects: * We no longer need to set LOCALBASE (a big no-no), and as a result also no longer need to set NO_MTREE, RCD_SCRIPTS_EXAMPLEDIR, or EVAL_PREFIX. This will also allow a few qmail-related packages to do likewise. * The commands and manual pages are in easily accessible paths by default. * Package installation and deinstallation work much better. Side effects: * There were a few minor conflicts with mail/courier-maildirmake, mail/mutt, and mail/pulsar. The latest versions of each are fine, so we add CONFLICTS only for older versions. (Thanks to those packages' maintainers!) There's also a conflict with security/mirrordir, which has a "bin/forward" command and corresponding section 1 man page. * Some directories under ${PREFIX} get chown'd to group qmail. Rather than modify the qmail installer, the affected directories are simply chown'd back afterward during post-install if PKG_INSTALLATION_TYPE is "overwrite". (If it's "pkgviews", then only the package's depot directory is affected, so we leave it alone.) 2) Follow more closely Dave Sill's "Life with qmail" (LWQ). Similarities: * Installs into /var/qmail from source. * Installs ucspi-tcp and daemontools. * Uses tcpserver(1). * Uses tcp.smtp.cdb for relay access control. * Uses control/defaultdelivery. * Uses control/concurrencyincoming. * Requires that control/rcpthosts exist to prevent open relays. * Uses similar chains of commands in run scripts. * Provides a script much like qmailctl. Differences: * This package does the following work for you automatically: * Creates user accounts. * Fetches, extracts, patches, configures, and compiles the source. * Installs binaries. * Runs ./config-fast. * Creates tcp.smtp{,cdb} and tcp.pop3d{,cdb}. * Creates control/concurrencyincoming. * Creates control/defaultdelivery (defaulting to "./Mailbox"). * Creates the three required system aliases. * LWQ suggests doing some things this package doesn't do: * Applying patches. * Copying a script from /var/qmail/boot to /var/qmail/rc. * Configuring svscan(8) to run at boot. * Creating and populating /service. * Using supervise(8) and multilog(8). * Using the qmailctl script to control qmail. * Using the inst_check script to verify the installation. * Storing tcp.smtp{,cdb} in /etc. * Renaming the system sendmail(8) and marking it non-executable. * Instead, this package: * Builds from unmodified source. (See also mail/netqmail.) * Uses NetBSD-style rc.d scripts (including one similar to qmailctl). * Sends log messages to syslog(3). * Stores tcp.smtp{,cdb} and tcp.pop3{,cdb} in ${PKG_SYSCONFDIR}. * Provides an example mailer.conf(5). 3) Add a bunch of features to the rc.d scripts. Rename the qmail script and rcvar to qmailsend. Add "doqueue" (synonyms: alrm, flush) and "queue" commands, add "hup" as a synonym for "reload", and determine default delivery instruction from control/defaultdelivery (LWQ). Add control/defaultdelivery to required_files. Rename qmailsend_flags to qmailsend_defaultdelivery, which overrides control/defaultdelivery if set. In the qmailpop3d and qmailsmtpd scripts, enforce resource limits with softlimit(8) (LWQ). Add dependency on sysutils/daemontools for this. Rename qmailfoo_flags to qmailfoo_tcpflags. Add qmailfoo_tcphost (default: 0, meaning "any address") and qmailfoo_tcpport (default: 110 and 25, respectively). Add qmailfoo_softlimit (default: 2000000). Add qmailfoo_pretcpserver and qmailfoo_prefoo (default: empty), useful for inserting commands such as rblsmtpd(1) or relay-ctrl into the chain. Log to splogger's default syslog facility ("mail"), and use the name of the script as the tag. In the qmailpop3d, qmailsend, and qmailsmtpd scripts, add qmailfoo_postenv (defaults: empty, PATH=${PREFIX}/bin:$PATH, and QMAILQUEUE=${PREFIX}/bin/qmail-queue, respectively), useful primarily for setting environment variables for each service. Add "pause" and "cont" commands (LWQ). They send -STOP and -CONT signals, respectively. Add "stat" as a synonym for "status" (LWQ). In the qmailpop3d script, add -x to qmailpop3d_tcpflags and add "cdb" command. Add qmailpop3d_checkpassword (useful for authenticating against alternate user databases) and qmailpop3d_maildirname (useful if your maildirs are named something other than "Maildir"). Add tcp.pop3.cdb to required_files. In the qmailsmtpd script, add -x and remove -H from qmailsmtpd_tcpflags, limit the number of incoming connections to control/concurrencyincoming, and add "cdb" command (LWQ). Add control/concurrencyincoming and tcp.smtp.cdb to required_files. Add qmailqread script and ${PREFIX}/bin/qmail-qread-client, based on Steinar Haug's example on www.qmail.org. If enabled, this allows local non-root users to see the queue. Add qmail script (structure copied from net/samba/files/samba.sh). Its interface is very similar to LWQ's qmailctl: it provides the commands "start stop restart rcvar pause cont stat status cdb doqueue reload queue alrm flush hup help". These commands can be run either directly from the appropriate service-specific script(s), or from this qmail script (which will call the right script(s) for you). 4) Remove some (but not all) obstacles to binary packaging. Each of these is better explained elsewhere. Summary: * Installs into the normal ${LOCALBASE}. * /var/qmail paths still work. * No patches are applied. (See also mail/netqmail.) 5) Introduce QMAIL_AUTOCONFIG, QMAIL_QUEUE_DIR, and QMAIL_QUEUE_EXTRA. QMAIL_AUTOCONFIG (default: YES): whether to automatically create basic config files. QMAIL_QUEUE_DIR (default: ${VARBASE}/spool/qmail): the path to the queue. QMAIL_QUEUE_EXTRA (default: empty): an additional recipient that will be added to every delivery. This is used primarily for logging. If this is set to a non-empty value, the necessary dot-qmail(5) file is created automatically at install time. 6) Enable pkgviews installation. 7) Bump PKGREVISION. Other user-visible changes: This package no longer applies patches to qmail. mail/netqmail, to be imported shortly, does. Restrictions on the redistribution of modified qmail apply not only to binaries but also to source. Clarify this in RESTRICTED. Add "newaliases", "hoststat", and "purgestat" entries to the sample mailer.conf. Install it to ${PREFIX}/share/examples/${PKGBASE}, as other pkgsrc mailers do. ("newaliases" is actually provided by the fastforward package, and isn't needed unless you're using it.) Explain how to enable qmail in MESSAGE (cribbed from the postfix package). Thanks to zuntum, snj, salo, and jlam for ideas, discussion, and review.
2004-04-27Explain why, after setting "command" in the usual way, we set itschmonz3-3/+11
again in foo_precmd() to a different value. This is an unusual usage, and these comments may help if a future rc.subr isn't as accommodating to such trickery. Suggested by lukem.
2004-04-24Add revision 1.01 of Ward Vandewege's badrcptto patch. With thisschmonz6-18/+102
patch, qmail-smtpd will reject mail during the SMTP conversation if a recipient is listed in control/badrcptto. This complements control/badmailfrom as found in stock qmail. Requested by Nathan Arthur. Add an rc.d script for qmail-pop3d. It needs sysutils/checkpassword, which is so tiny I've added the dependency even as I don't use qmail-pop3d myself. In the rc.d script for qmail-smtpd, require control/rcpthosts to be present. This prevents accidental open relays. Now that it's used for the path to checkpassword too, rename LOCALBASE_UCSPI_TCP to LOCALBASE_NORMAL. Convert to buildlink3. Bump PKGREVISION.
2004-04-24Remove ${QMAILDIR}/etc/rc.d/qmail{,smtpd} from PLIST, as RCD_SCRIPTSschmonz1-3/+1
are now automatically registered with installed packages.
2004-04-10Take MAINTAINER at zuntum's suggestion.schmonz1-2/+2
2004-04-10Note that one now has the additional rc.conf option of "qmailsmtpd=YES".schmonz1-2/+4
2004-04-10Russ Nelson, Charles Cazabon, Dave Sill, Peter Samuel, and Henningschmonz22-41/+500
Brauer have prepared a distribution of qmail, called "netqmail": "We have done this because in our opinion, too many new users are confused by the out-of-date INSTALL file, and too much time is spent arguing on the mailing list over bugs. We have tried to stick to the barest minimum number of changes. We have fixed only those things which are out-and-out wrong, or which have been approved by djb (specifically QMAILQUEUE)." This package already includes the QMAILQUEUE patch. Add netqmail 1.05's other patches, with the exception that patches to documentation files which are not installed have been lovingly omitted. This package also already includes a patch to handle oversized DNS packets. It's still here, too. pkgsrc changes: * Add qmail-smtpd rc.d script (and ensuing dependency on net/ucspi-tcp). * Update qmail rc.d script: respect $qmail_flags, treating it as the default delivery instruction. * Remove non-working MASTER_SITES. From the netqmail changelog: 20040121 code: qmail-smtpd is protected from exceedingly long (eg 2GB) header lines 20040121 code: qmail_lspawn, qmail-newmrh, qmail-newu, and qmail-rspawn are protected from misbehaving on hosts where the size of an integer is not the same as the size of a character pointer (eg 64 bit hosts with 32 bit ints) 20031027 doc: qmail.7 identifies installation as netqmail and points to http://qmail.org/ 20031027 doc: qmail-queue.8 adds explanation of $QMAILQUEUE 20031027 doc: qmail-log.5 adds reference to errors from $QMAILQUEUE script 20031027 code: qmail-smtpd identifies itself as netqmail 20031027 code: if $QMAILQUEUE is set, it's invoked instead of qmail-queue 20031024 code: changed errno from int to #include. 20031024 code: fixed .qmail parsing bug. 20031024 code: recognize 0.0.0.0 as a local address. 20031024 code: sendmail's -f flag now overrides environment variables. And for all this, bump PKGREVISION. Pre-flight checks by snj@.
2004-03-29Supply a default mailq entry in mailer.conf.snj2-3/+4
Fixes PR pkg/21591.
2003-08-30Add definitions for DEINSTALL_EXTRA_TMPL and INSTALL_EXTRA_TMPL ifjlam1-1/+2
USE_PKGINSTALL is "YES". bsd.pkg.install.mk will no longer automatically pick up a INSTALL/DEINSTALL script in the package directory and assume that you want it for the corresponding *_EXTRA_TMPL variable.
2003-07-17s/netbsd.org/NetBSD.org/grant1-2/+2
2003-01-28Instead of including bsd.pkg.install.mk directly in a package Makefile,jlam1-2/+2
have it be automatically included by bsd.pkg.mk if USE_PKGINSTALL is set to "YES". This enforces the requirement that bsd.pkg.install.mk be included at the end of a package Makefile. Idea suggested by Julio M. Merino Vidal <jmmv at menta.net>.
2002-09-24Complete standardization of messages according to latest pkglint.wiz1-3/+3
2002-09-20Make these scripts more portable by taking advantage of automatic rc.dgrant1-2/+2
script handling and using @RCD_SCRIPTS_SHELL@. as discussed with jlam.
2002-09-19Take advantage of the auto-generation and installation of rc.d scripts.jlam1-6/+1
2002-09-18When using bsd.pkg.install.mk, if a DEINSTALL or INSTALL file alreadyjlam1-3/+1
exists, then use it as the default value of DEINSTALL_EXTRA_TMPL or INSTALL_EXTRA_TMPL.