Age | Commit message (Collapse) | Author | Files | Lines |
|
Postfix stable release 2.8.4 is available. This contains fixes and
workarounds that were already included with the Postfix 2.9
experimental release. Where applicable these fixes will also be
made available for the legacy releases Postfix 2.5..2.7.
* Performance: a high load of DSN success notification requests
could slow down the queue manager. Solution: make the trace
client asynchronous, just like the bounce and defer clients.
* The local(8) delivery agent ignored table lookup errors in
mailbox_command_maps, mailbox_transport_maps, fallback_transport_maps
and (while bouncing mail to alias) alias owner lookup.
* Workaround: dbl.spamhaus.org rejects lookups with "No IP
queries" even if the name has an alphanumerical prefix. We
play safe, and skip both RHSBL and RHSWL queries for names
ending in a numerical suffix.
* The "sendmail -t" command reported "protocol error" instead
of "file too large", "no space left on device" etc.
* The Postfix Milter client reported a temporary error instead
of "file too large" in three cases.
* Linux kernel version 3 support. Linus Torvalds has reset the
counters for reasons not related to changes in code.
You can find the updated Postfix source code at the mirrors listed
at http://www.postfix.org/.
|
|
* In mimedefang.c, truncate overlong responses from the multiplexor. Also sanitize replies so "\r" doesn't get fed to smfi_setmlreply.
* If a slave process replies with a very long reply, have the multiplexor consume (and discard) the excess input so the multiplexor-to-slave protocol does not become de-synchronized.
* When mimedefang becomes a daemon, have it wait for a "go/no-go" message from the child before exiting. This should eliminate race conditions whereby the MTA starts before the milter socket is present.
* Avoid run-time errors from Unix::Syslog on some platforms.
|
|
MFSA 2011-24 Cookie isolation error
MFSA 2011-23 Multiple dangling pointer vulnerabilities
MFSA 2011-22 Integer overflow and arbitrary code execution in
Array.reduceRight()
MFSA 2011-21 Memory corruption due to multipart/x-mixed-replace images
MFSA 2011-20 Use-after-free vulnerability when viewing XUL document with
script disabled
MFSA 2011-19 Miscellaneous memory safety hazards (rv:3.0/1.9.2.18)
|
|
|
|
|
|
Version 1.4.22 - 12 July 2011
-----------------------------
- Backported default timezone fix from version 1.5.2; helps mitigate
timezone errors in environments where a default has not been set
by the administrator.
- Fixed system lock-ups caused by a combination of certain rare,
malformed message headers and buggy versions of PHP mbstring
(#3053349).
- Now allow multiple plugins to handle (add links for) a single
attachment MIME type.
- Now allow administrators to disable all plugins or enable just
a select few plugins (overriding the active plugins in the normal
configuration) by setting $temporary_plugins as an empty array
(all disabled) or an array with one or more plugin directory names
in config_local.php.
- Backport fix for call_user_func_array not supporting NULL as empty
array in PHP 5.3.3
- Fixed sqauth_read_password() for plugins on the login_verified hook.
- Added SMTP SASL PLAIN authentication option to configuration tool
(core support for such is not new).
- Gmail doens't support standard search commands; removed sort buttons.
- Forced addition of a file suffix to attachments that lack a filename
(helps forwarded messages avoid spam filters) (thanks to Petr
Kletecka) (#3139004).
- Fixed missing security token in listcommands plugin.
- Added smtp_auth hook (thanks to Emmanuel Dreyfus).
- Made speed enhancements to threaded message display (thanks to Siim
Poder) (#3288123).
- Allow administrators to configure subfolders of user INBOXes to be
treated as special folders by adding $subfolders_of_inbox_are_special
to config_local.php.
- Fixed incorrect display of INBOX subfolders under some configurations.
IMPORTANT: You may need to update your configuration so that
$default_sub_of_inbox is TRUE if it was FALSE (e.g., Courier IMAP users)
and after updating to this version, your special folders are no longer
listed at the top of your folder list. Also, if this change prevents
users from logging in with an error such as "ERROR: Could not complete
request. Query: CREATE "Trash" Reason Given: Invalid mailbox name.",
you will need to correct the user preference values for the problem
folders. You can do so with commands such as the following for file-
based preferences (adjust the data directory location as needed):
find /var/lib/squirrelmail/data/ -name *.pref -exec sed --in-place 's/trash_folder=Trash/trash_folder=INBOX.Trash/g' {} \;
find /var/lib/squirrelmail/data/ -name *.pref -exec sed --in-place 's/trash_folder=Drafts/trash_folder=INBOX.Drafts/g' {} \;
find /var/lib/squirrelmail/data/ -name *.pref -exec sed --in-place 's/trash_folder=Sent/trash_folder=INBOX.Sent/g' {} \;
Or, for database-based preferences:
UPDATE userprefs SET prefval = 'INBOX.Trash' WHERE prefkey = 'trash_folder' AND prefval = 'Trash';
UPDATE userprefs SET prefval = 'INBOX.Drafts' WHERE prefkey = 'draft_folder' AND prefval = 'Drafts';
UPDATE userprefs SET prefval = 'INBOX.Sent' WHERE prefkey = 'sent_folder' AND prefval = 'Sent';
MAKE SURE to back up your user preferences first!
- Optimized message highlighting rules; faster message list display
and faster highlight rules management (thanks to C. Bensend for
extensive effort helping diagnose)
- New Mail plugin no longer removes normal organization title when
putting the number of new messages in the browser title
- Added clickjacking protection (thanks to Asbjorn Thorsen and Geir
Hansen for bringing this to our attention). [CVE-2010-4554]
- Fixed XSS holes in generic options inputs, XSS hole in the SquirrelSpell
plugin, XSS hole in the Index Order page, and added anti-CSRF protection
to the empty trash feature and the Index Order page (thanks to Nicholas
Carlini for finding all these issues). [CVE-2010-4555]
- Fixed XSS problem with unsanitized style tags in messages. [CVE-2011-2023]
|
|
|
|
* bump PKGREVISION.
|
|
While here,
* Exactly enable/disable PCRE support with package option, enabled by default.
* Add workaround patches for PR#44275, sizeof(time_t) > sizeof(unsigned long).
Changes to the Cyrus IMAP Server since 2.4.9
* fixed handling of unparsable emails during append (which would
cause invalid cyrus.index records otherwise)
* quota: fix a pile of bugs. #1801, virtdomain support; #2728, slow
user delete; #3178, "file name too long" with big mailbox names;
#3179, quota -f doubles usage.
* Bug #3043 - parse multiple groups in headers correctly
* Bug #3158 - lmtp backend connection timeout
* Bug #3223 - limit MIME parsing depth to avoid stack overflows
* Bug #3273 - add SORT=DISPLAY support (but note: still questions
about correctness of unicode sorting)
* Bug #3504 - convert all sieve scripts to \r\n line endings on
upload
* Bug #3402 - options to munge 8bit characters in headers during lmtp
delivery to avoid backscatter
* sync_client: fix broken keepalive TCP options (I doubt anyone ever
tried to use it)
* Bug #3482 - add "-o" option to ipurge to only purge messages with
\Deleted flag set
|
|
and using an in this case undefined helper function.
|
|
|
|
|
|
|
|
|
|
Add PKG_DESTDIR_SUPPORT;
Add LICENSE
`$Cambridge: hermes/src/prayer/docs/DONE,v 1.66 2011/06/27 13:39:56 dpc22 Exp $
27/06/2010
==========
Release: Prayer 1.3.4
22/06/2011
==========
draft.c fixes:
Fold long lines of addresses before the entry which reaches 78 characters
when possible, rather than after the first entry which crosses that
boundary. Long standing bug bear of mine but several support functions
needed to be rewritten to use scratch string in place of output buffer.
Long subject lines which are not RFC1522 encoded need to be folded.
separately. Reported by Andrey N. Oktyabrski <ano@bestmx.ru>.
RFC1522 is not allowed to fold lines in the middle of a UTF-8 multibyte
character. Reported by Andrey N. Oktyabrski <ano@bestmx.ru>.
Tidy library:
Add support for tidyp fork of (apparently abandoned) tidy library.
Fix cross site scripting problem:
MSIE and Chrome think that <!---> is a complete comment. Allows people to
hide scripts inside <!---><script>...<!--->. Strip all comments (which is
something that the old sanitiser had been doing already)
Sieve blocks should check "From: " address in body as well as
envelope sender address. Check "Sender: " as well for completeness.
Linux needs IPPROTO_IPV6 to bind to '0.0.0.0' and '::'
01/11/2010
==========
Mike Brudenell <mike.brudenell@york.ac.uk> reported problem with RFC
2183/RFC 2231 quoting with vey long filenames, or filenames with strange
characters from ASCII range.
20/07/2010
==========
Release: Prayer 1.3.3
08/07/2010
==========
Better handling of complex multipart messages:
Rather than just displaying the first text/plain or text/html that we can
find in the top, (leaving people to access sections for the other parts),
display the entire tree: multipart/alternative are handled as before, but
with other multipart messages, recurse into the subtrees and repeat. Given:
1 (Nested multipart)
1.1 text/html
1.2 text/plain
2 text/plain
we display sections 1.1 and 2. Previously we would display section 2,
which is a bit of a disaster if section (1) was the original message and
a listserver has helpfully tagged on a message footer as a separate bodypart
Combine os_*.c back into a single file (which is where I started off
many years back). Eliminates lots of repeated code.
07/07/2010
==========
Bugs
====
os_bind_inet_socket(unsigned long port, char *interface)
If interface resolves to multiple IP addresses then only binds to the
first. Should really walk along ai->ai_next and bind to each IP address
in turn. Unfortuanetly this means that os_bind_inet_socket() needs to
return an array of sockfds rather than a single int. Parent routines
probably aren't going to play ball either.
Most likely cause will be a hostname which generates both IPv4 and IPv6
addresses. Unfortanately it is a probably that we are going to have
to solve eventually.
05/07/2010
==========
Fix XSS problems reported by:
Jacob H. Hilton <jhh40@cam.ac.uk>
Dr Andrew C Aitchison <A.C.Aitchison@dpmms.cam.ac.uk>
Rather than trying to spot dangerous tags by simple substring matching in C,
I now feed the html through Tidy library (http://tidy.sourceforge.net/),
and then prune unwanted nodes from the parse tree before setting it to
the pretty printer. The only problem is that the Tidy library doesn't
provide any public API for manipulating the parse tree (although it does
provide a public API for walking the tree!?), so I had to dig around to
find the private functions required to remove and manipulate nodes.
Javascript embedded into CSS is also a problem: I need to strip off CSS
character entities before looking for dangerous expressions. The final
part is still a simple string match: I hope that I don't end up having to
generate parse trees for CSS as well as the HTML.
Now passes full test suite at:
https://secure.grepular.com/email_privacy_tester/
Better vacation screen
Subject line
Phrasing
Coping with multiple logins as single user from single browser:
SessionID stored in HTTP Cookie: second login blats first
Can store SessionID in URL (Prayer does this if no cookies available)
Not secure: leaks in HTTP "Referrer" header with links from HTML email.
Solution: Use HTTP Cookie keyed by PID of login session.
Smaller cleanups:
Improve gap between words in spell check (Cambridge house style)
Remove extra blank lines after postpone, restore cycle.
|
|
gnutls.
PKGREVISION++
|
|
while here, expunge old sites from MASTER_SITES, and add the http site in
release announcement.
Changes to the Cyrus IMAP Server since 2.4.8
* fixed crashes in seen handling
* Bug #3453 - fixed LSUB replication
* Bug #3442 - allow disabling PCRE if it's buggy at your site
* Bug #3443 - LSUB response fixes
* Bug #3448 - XFER error handling (murder)
* Bug #3437 - fixed regression: quotaroot wasn't being updated on
rename
* Bug #3456 - fixed crash on rename user.foo user.foo without
partition change
* config update: database paths for most databases are now
configurable in imapd.conf
* Bug #3303 - fixed index lock breaking on XFER (thanks Julien
Coloos)
* Bug #3457 - fixed ESEARCH parsing (was breaking iPhones)
* Bug #3188 - fixed XFER with unlimited quota (thanks again Julien
Coloos)
* Misc other quota fixes (there are still known bugs with the quota
system)
* Bug #3169 - fixed GETQUOTAROOT for domain quotaroots
* Bug #3465 - fixed compilation with Perl 5.14 (thanks
hsk@imb-jena.de, and also thanks to Ondrej Sury who reported it
separately)
* Bug #3464 - fix for sendmail exec failure. This was a nasty one,
|
|
Patch was provided by PR pkg/45088 from ISIHARA Takanori.
Changes of Sylpheed
* 3.1.1 (stable)
* The column width of the address book will be saved now.
* The keyboard shortcut of 'File/Send' menu of compose window was changed
to prevent accidental sending.
* The bug that caused occasional crash when summary was updated while
receiving messages was fixed.
* The compilation problem on some environment was fixed.
* Some locale problems on Mac OS X was fixed.
* The compilation error on newer gcc was fixed.
* Finnish translation was added.
|
|
|
|
|
|
Based on PR#44939 by Susumu Miwa.
Modified by Makoto Fujiwawa and me in pkgsrc-wip.
Quickml server provides very-easy-to-use mailing list service.
It was too open in this age, some limitation is provided in
this package. The original code is written by Satoru Takabayashi.
|
|
These are update of the version only.
|
|
|
|
|
|
|
|
supported by "pkgsrc" provide PAM support out of the box.
Change approved by Geert Hendrickx.
|
|
== [release-1-8-0] 1.8.0: 2011-06-10
The first release of stable 1.8.x series.
=== All
==== Improvements
* Removed unused variables.
=== Package
==== Improvements
* [debian] Removed Debian GNU/Linux lenny support.
* [debian] Added Debian GNU/Linux wheezy support.
* [ubuntu] Removed Ubuntu Hardy Heron support.
* [ubuntu] Removed Ubuntu Maverick Meerkat support.
* [ubuntu] Added Ubuntu Natty Narwhal support.
* [redhat] Specified PID file in init file explicitly.
* [freebsd] Supported /etc/rc.conf.local.
[Patch by moto kawasaki]
==== Fixes
* [debian] Added missing milter.rb.
[Reported by Mitsuru Ogino]
=== milter manager
==== Improvements
* [trust applicable condition] Normalized domain name.
* Added ((<trust.clear|configuration.rd#trust.clear>))
configuration item.
* Added
((<trust.load_envelope_from_domains|configuration.rd#trust.load_envelope_from_domains>))
configuration item.
* [trust applicable condition] Added ezweb.ne.jp and
docomo.ne.jp to built-in trusted domain list.
* Used fallback status on negotiate.
* Added
((<manager.chunk_size|configuration.rd.ja#manager.chunk_size>))
configuration item.
==== Fixes
* Fixed a bug that child milter process launcher isn't
exited.
[Reported by OBATA Akio]
* Fixed a bug that child milters that return reject,
temporary failure or discard aren't used in the same
session.
=== milter-core
==== Improvements
* Added trace log level that is more verbose than debug
log level.
* Supported +/- log level prefix to add/remove log level
from the current log levels in MILTER_LOG_LEVEL
environment environment.
==== Fixes
* Fixed a read block bug when readable data is available.
=== Ruby milter
==== Improvements
* [configuration] Used 'accept' as default value for
fallback status.
=== milter-performance-check
==== Improvements
* Supported CentOS 5.
=== Document
==== Fixes
* Used Milter::VERSION instead of Milter::TOOLKIT_VERSION
for confirming Ruby milter's version.
[Reported by Mitsuru Ogino]
|
|
autoconf churn.
|
|
8.14.5/8.14.5 2011/05/17
Do not cache SMTP extensions across connections as the cache
is based on hostname which may not be a unique identifier
for a server, i.e., different machines may have the
same hostname but provide different SMTP extensions.
Problem noted by Jim Hermann.
Avoid an out-of-bounds access in case a resolver reply for a DNS
map lookup returns a size larger than 1K. Based on a
patch from Dr. Werner Fink of SuSE.
If a job is aborted using the interrupt signal (e.g., control-C from
the keyboard), perform minimal cleanup to avoid invoking
functions that are not signal-safe. Note: in previous
versions the mail might have been queued up already
and would be delivered subsequently, now an interrupt
will always remove the queue files and thus prevent
delivery.
Per RFC 6176, when operating as a TLS client, do not offer SSLv2.
Since TLS session resumption is never used as a client, disable
use of RFC 4507-style session tickets.
Work around gcc4 versions which reverse 25 years of history and
no longer align char buffers on the stack, breaking calls
to resolver functions on strict alignment platforms.
Found by Stuart Henderson of OpenBSD.
Read at most two AUTH lines from a server greeting (up to two
lines are read because servers may use "AUTH mechs" and
"AUTH=mechs"). Otherwise a malicious server may exhaust
the memory of the client. Bug report by Nils of MWR
InfoSecurity.
Avoid triggering an assertion in the OpenLDAP code when the
connection to an LDAP server is lost while making a query.
Problem noted and patch provided by Andy Fiddaman.
If ConnectOnlyTo is set and sendmail is compiled with NETINET6
it would try to use an IPv6 address if an IPv4 (or
unparseable) address is specified.
If SASLv2 is used, make sure that the macro {auth_authen} is
stored in xtext format to avoid problems with parsing
it. Problem noted by Christophe Wolfhugel.
CONFIG: FEATURE(`ldap_routing') in 8.14.4 tried to add a missing
-T<TMPF> that is required, but failed for some cases
that did not use LDAP. This change has been undone
until a better solution can be implemented. Problem
found by Andy Fiddaman.
CONFIG: Add cf/ostype/solaris11.m4 for Solaris11 support.
Contributed by Casper Dik of Oracle.
CONTRIB: qtool.pl: Deal with H entries that do not have a
letter between the question marks. Patch from
Stefan Christensen.
DOC: Use a better description for the -i option in sendmail.
Patch from Mitchell Berger.
Portability:
Add support for Darwin 10.x (Mac OS X 10.6).
Enable HAVE_NANOSLEEP for FreeBSD 3 and later. Patch
from John Marshall.
Enable HAVE_NANOSLEEP for OpenBSD 4.3 and later.
Use new directory "/system/volatile" for PidFile on
Solaris 11. Patch from Casper Dik of Oracle.
Fix compilation on Solaris 11 (and maybe some other
OSs) when using OpenSSL 1.0. Based on patch from
Jan Pechanec of Oracle.
Set SOCKADDR_LEN_T and SOCKOPT_LEN_T to socklen_t
for Solaris 11. Patch from Roger Faulkner of Oracle.
New Files:
cf/ostype/solaris11.m4
|
|
*Rails 3.0.8 (unreleased)*
* Mail dependency increased to 2.2.19
|
|
Exact changes are unknown but some bug fixes.
|
|
== Tue Apr 26 09:49:54 UTC 2011 Mikel Lindsaar <mikel@rubyx.com>
* Update activesupport require to use inflector - closes #217
== Tue Apr 26 06:18:19 UTC 2011 Mikel Lindsaar <mikel@rubyx.com>
* Fixed charset warning issue with multipart messages - https://github.com/arvindsv
* Version bump to 2.2.18 and gem release
== Wed 20 Apr 2011 15:16:20 UTC Mikel Lindsaar <mikel@rubyx.com>
* Mail::Field.new("Subject: foobar", 'iso-2022-jp') does not set charset - https://github.com/yalab
== Tue Apr 19 00:20:54 UTC 2011 Mikel Lindsaar <mikel@rubyx.com>
* Fixed an exception with nil in Reply-To and References field - https://github.com/dcormier
* Version bump to 2.2.17 and gem release
== Sat Apr 16 12:57:27 UTC 2011 Mikel Lindsaar <mikel@rubyx.com>
* Added support for open SMTP connections and returning the Mail server's response - https://github.com/spiegela
* RE: not appended to subject when replying to a reply - https://github.com/prateekdayal
* Support not ascii compatible charset mail send - https://github.com/yalab
* Fix for issue 208 "mail.body after mail.add_file truncates message body" - https://github.com/glongman
* Handle bad subject encoding (or ":invalid => :replace" is ineffective for utf-8 to utf-8 encoding) - https://github.com/choonkeat
* Handle blank Received header field - https://github.com/bcantin
* Handle part with missing content type - https://github.com/bcantin
* Handle a "<>" Return field - https://github.com/bcantin
* Performance improvements for 1.9 - https://github.com/nobu
* Fix heavy CPU issues when messages are missing a space - https://github.com/scsmith
* Tighten up allowed encodings - https://github.com/scsmith
* Added to_yaml & from_yaml (as well as to_hash & from_hash) - https://github.com/srushti
* Fix up some comments - https://github.com/takahashim
* Version bump to 2.2.16 and gem release
|
|
|
|
|
|
Update MANAGESIEVE_VERSION to 0.11.13, for dovecot-1.2.17.
rest part of PR#44970.
Sieve:
v0.1.19 19-05-2011 Stephan Bosch <stephan@rename-it.nl>
- Enotify extension: fixed inappropriate return type in mailto URI parse
function, also fixing ARM compiler warning.
- Vacation extension: fixed handling of sendmail errors. It produced an
additional confusing success message in case of error.
- Removed header MIME-decoding to fix erroneous address parsing. Applies to
address test and vacation command.
ManageSieve:
v0.11.13:
- ManageSieve: fixed bug in UTF-8 checking of string values.
|
|
Requested by PR#45030.
fetchmail-6.3.20 (released 2011-06-06, 26005 LoC):
# SECURITY BUG FIXES
* CVE-2011-1947:
STARTTLS: Fetchmail runs the IMAP STARTTLS or POP3 STLS negotiation with the
set timeout (default five minutes) now. This was reported missing, with
observed fetchmail freezes beyond a week, by Thomas Jarosch.
SSL-wrapped connections were unaffected by this timeout, so users of older
versions can force ssl-wrapped connections -- if supported by the server --
with the --ssl command line or ssl rcfile option.
See fetchmail-SA-2011-01.txt for further details.
# BUG FIXES
* IMAP: Do not search for UNSEEN messages in ranges. Usually, there are very few
new messages and most of the range searches result in nothing. Instead, split
the long response to make the IMAP driver think that there are multiple lines
of response. (Sunil Shetye)
* Do not print "skipping message" for old messages even in verbose mode. If
there are too many old messages, the logs just get filled without any real
activity. (Sunil Shetye) (suggested by Yunfan Jiang)
* Build: fetchmail now always uses its own MD5 implementation rather than trying
to find a system library with matched header. The library and header variants
found on systems are too diverse, and the code size saving is not worth any
more wasted user or programmer time.
# CHANGES
* Call strlen() only once when removing CRLF from a line. (Sunil Shetye)
* fetchmail sets Internet domain sockets to "keepalive" mode now. Note that
there is no portable way to configure actual timeouts for this mode, and some
systems only support a system-wide timeout setting. fetchmail does not
attempt to tune the time spans of keepalive mode.
# TRANSLATION UPDATES
[cs] Chech (Petr Pisar)
[nl] Dutch (Erwin Poeze)
[fr] French (Frédéric Marchal)
[de] German (Matthias Andree)
[ja] Japanese (Takeshi Hamasaki)
[pl] Polish (Jakub Bogusz)
[sk] Slovak (Marcel Telka)
# KNOWN BUGS AND WORKAROUNDS
(this section floats upwards through the NEWS file so it stays with the
current release information - however, it was stuck with 6.3.8 for a while)
* fetchmail does not handle messages without Message-ID header well
(See sourceforge.net bug #780933)
* BSMTP is mostly untested and errors can cause corrupt output.
* Sun Workshop 6 (SPARC) is known to miscompile the configuration file lexer in
64-bit mode. Either compile 32-bit code or use GCC to compile 64-bit
fetchmail. Note that fetchmail doesn't take advantage of 64-bit code,
so compiling 32-bit SPARC code should not cause any difficulties.
* fetchmail does not track pending deletes over crashes.
* the command line interface is sometimes a bit stubborn, for instance,
fetchmail -s doesn't work with a daemon running.
* Linux systems may return duplicates of an IP address in some circumstances if
no or no global IPv6 addresses are configured.
(No workaround. Ubuntu Bug#582585, Novell Bug#606980.)
* Kerberos 5 may be broken, particularly on Heimdal, and provide bogus error
messages. This will not be fixed, because the maintainer has no Kerberos 5
server to test against. Use GSSAPI.
fetchmail-6.3.19 (released 2010-12-10, 25945 LoC):
# ERRATUM NOTICE ISSUED
* fetchmail 6.3.18 contains several bug fixes that were considered sufficiently
grave to warrant the issue of an erratum notice, fetchmail-EN-2010-03.txt.
# BUG FIXES
* When specifying multiple local multidrop lists, do not lose wildcard flag.
(Affects "user foo is bar baz * is joe here")
* In multidrop configurations, an asterisk can now appear anywhere in the list
of local users, not just at the end.
* In multidrop mode, header parsing is now more verbose in -vv mode, so that it
becomes possible to see which header is used.
* Make --antispam work from command line (these used to work in rcfiles).
Reported by Kees Bakker, BerliOS Bug #17599. (Sunil Shetye)
* Smoke test XHTML 1.1 validation, and if it fails, skip validating HTML
documents. Skip validating Mailbox-Names-UTF7.html. Several systems have
broken XHTML 1.1 DTD installations that jeopardize the build.
Reported by Mihail Nechkin against FreeBSD port.
Workaround for 6.3.18: build in a separate directory, i. e:
mkdir build && cd build && ../configure --options-go-here
* Send a NOOP only after a failed STARTTLS in IMAP. (Sunil Shetye)
* Demote GSSAPI verbose/debug syslog to INFO severity. Requested by Carlos E. R.
and Derek Simkowiak via the fetchmail-users@ mailing list.
* Do STARTTLS/STLS negotiation in IMAP/POP3 if it is mandatory even if the
server capabilities do not show support for upgradation to TLS.
To use this, configure --sslproto tls1. (Sunil Shetye)
* IMAP: Understand empty strings as FETCH response, seen on Yahoo. Reported by
Yasin Malli to fetchmail-users@ 2010-12-10.
Note that fetchmail continues to expect literals as FETCH response for now.
# DOCUMENTATION
* The manual page now links to IANA for GSSAPI service names.
# TRANSLATION UPDATES
[cs] Czech (Petr Pisar)
[fr] French (Frédéric Marchal)
[de] German
[it] Italian (Vincenzo Campanella)
[pl] Polish (Jakub Bogusz)
fetchmail-6.3.18 (released 2010-10-09, 25936 LoC):
# SECURITY IMPROVEMENTS TO DEFANG X.509 CERTIFICATE ABUSE
* Fetchmail now only accepts wildcard certificate common names and subject
alternative names if they start with "*.". Previous versions would accept
wildcards even if no period followed immediately.
* Fetchmail now disallows wildcards in certificates to match domain literals
(such as 10.9.8.7), or wildcards in domain literals ("*.168.23.23").
The test is overly picky and triggers if the pattern (after skipping the
initial wildcard "*") or domain consists solely of digits and dots, and thus
matches more than needed.
* Fetchmail now disallows wildcarding top-level domains.
# CRITICAL BUG FIXES AND REGRESSION FIXES
* Fetchmail 6.3.15, 6.3.16, and 6.3.17 would pick up libmd5 to obtain MD5*
functions, as an effect of an undocumented Solaris MD5 fix.
This caused all MD5-related functions to malfunction if, for instance,
libmd5.so was installed on other operating systems as part of libwww on
machines where long isn't 32-bits, i. e. usually on 64-bit computers.
Fixes Gentoo Bug #319283, reported, including libwww hint, by Karl Hakimian.
Side effect: fetchmail will now use -lmd on Solaris rather than -lmd5.
* Fetchmail 6.3.17 warned about insecure SSL/TLS connections even if a matching
--sslfingerprint was specified. This is an omission from an SSL usability
change made in 6.3.17.
Fixes Debian Bug#580796 reported by Roland Stigge.
* Fetchmail will now apply timeouts to the authentication stage.
This stage encompasses STARTTLS/STLS negotiation in IMAP/POP3.
Reported missing by Thomas Jarosch.
* Fetchmail now cancels GSSAPI authentication properly when encountering GSS
errors, such as no or unsuitable credentials.
It now sends an asterisk on a line by its own, as required in SASL.
This fixes protocol synchronization issues that cause Authentication
failures, often observed with kerberized MS Exchange servers.
Fixes Debian Bug #568455 reported by Patrick Rynhart, and Alan Murrell, to the
fetchmail-users list. Fix verified by Thomas Voigtmann and Patrick Rynhart.
# BUG FIXES
* Fetchmail will no longer print connection attempts and errors for one host
in "silent" and "normal" logging modes, unless all connections fail. This
should reduce irritation around refused-connection logging if services are
only on an IPv4 socket if the host also supports IPv6. Often observed as
connections refused to ::1/25 when the subsequent connection to 127.0.0.1/25
then - silently - succeeds. Fetchmail, unless in verbose mode, will collect
all connect errors and only report them if all of them fail.
* Fetchmail will not try GSSAPI authentication automatically, unless it has GSS
credentials. However, if GSSAPI authentication is requested explicitly,
fetchmail will always try it.
* Fetchmail now parses response to "FETCH n:m RFC822.SIZE" and "FETCH n
RFC822.HEADER" in a more flexible manner. (Sunil Shetye)
* The manual page clearly states that --principal is for Kerberos 4 only, not
for Kerberos 5 or GSSAPI. Found by Thomas Voigtmann.
# CHANGES
* When encountering incorrect headers, fetchmail will refer to the bad-header
option in the manpage.
Fixes BerliOS Bug #17272, change suggested by Björn Voigt.
* Fetchmail now decodes and reports GSSAPI status codes upon errors.
* Fetchmail now autoprobes NTLM also for POP3.
* The Fetchmail FAQ has a new item #R15 on authentication failures.
# INTERNAL CHANGES
* The common NTLM authentication code was factored out from pop3.c and imap.c.
# TRANSLATION UPDATES
[zh_CN] Chinese/simplified (Ji Zheng-Yu)
[cs] Czech (Petr Pisar)
[nl] Dutch (Erwin Poeze)
[fr] French (Frédéric Marchal)
[de] German
[it] Italian (Vincenzo Campanella)
[ja] Japanese (Takeshi Hamasaki)
[pl] Polish (Jakub Bogusz)
[sk] Slovak (Marcel Telka)
|
|
* Potentially safer method for writing feeds.dat on UNIX
* Handle via links with no title attribute
* Handle attributes more cleanly with OVERRIDE_EMAIL and DEFAULT_EMAIL
|
|
|
|
|
|
For ${OPSYS}/${USE_DESTDIR}/${PKGMANDIR} combinations that already
worked, no functional change (hence no PKGREVISION bump).
|
|
This bugfix release fixes two important bugs in the IMAP communication which
prevented sent messages from being saved in version 0.5.2.
|
|
-fix logging errors in error paths. Thanks: Visa Putkinen.
|
|
- Tiny changes for Perl 5.12.
- Build scripts are updated.
Use `sysconfdir' instead of `libdir' for the configuration file.
${DESTDIR) is prepended to each installed target.
|
|
- Fix ratelimit sliding window for computing average
- Fix p0f port byte order (Enrico Scholz)
- Fix milter-greylist.m4 for newer Sendmail (Joe Pruett)
- Fix autoconf warning about --datarootdir (R P Herrold)
|
|
changes:
-bugfixes
-translation updates
|
|
XXX: managesieve option is still broken, due to missing patch for 1.2.17.
|
|
|
|
Bump PKGREVISION.
|
|
changes:
-bugfixes
-translation updates
|
|
|