Age | Commit message (Collapse) | Author | Files | Lines |
|
* Install README.LDAP when "ldap" is enabled in PKG_OPTIONS.
* Fix build problem when "kerberos" is enabled in PKG_OPTIONS.
Bump PKGREVISION since default PLIST has changed.
|
|
relevant bugs) version:
Major changes between version 1.7.4p3 and 1.7.4p4:
* A potential security issue has been fixed with respect to the
handling of sudo's -g command line option when -u is also
specified. The flaw may allow an attacker to run commands as a
user that is not authorized by the sudoers file.
* A bug has been fixed where "sudo -l" output was incomplete if
multiple sudoers sources were defined in nsswitch.conf and there
was an error querying one of the sources.
* The log_input, log_output, and use_pty sudoers options now work
correctly on AIX. Previously, sudo would hang if they were
enabled.
* Fixed "make install" when sudo is built in a directory other
than the directory that holds the sources.
* The runas_default sudoers setting now works properly in a
per-command Defaults line.
* Suspending and resuming the bash shell when PAM is in use now
works properly. The SIGCONT signal was not being propagated to
the child process.
Major changes between version 1.7.4p2 and 1.7.4p3:
* A bug has been fixed where duplicate HOME environment variables
could be set when the env_reset setting was disabled and the
always_set_home setting was enabled in sudoers.
* The value of sysconfdir is now substituted into the path to the
sudoers.d directory in the installed sudoers file.
* Fixed compilation problems on Irix and other platforms.
* If multiple PAM "auth" actions are specified and the user enters
^C at the password prompt, sudo will now abort any subsequent
"auth" actions. Previously it was necessary to enter ^C once for
each "auth" action.
Major changes between version 1.7.4p1 and 1.7.4p2:
* Fixed a bug where sudo could spin in a cpu loop waiting for the
child process.
* Packaging fixes for sudo.pp to better handle patchlevels.
Major changes between version 1.7.4 and 1.7.4p1:
* Fix a bug introduced in sudo 1.7.3 that prevented the -k and -K
options from functioning when the tty_tickets sudoers option was
enabled.
* Sudo no longer prints a warning when the -k or -K options are
specified and the ticket file does not exist.
* Changes to the configure script to enable cross-compilation of
Sudo.
Major changes between version 1.7.3 and 1.7.4:
* Sudoedit will now preserve the file extension in the name of the
temporary file being edited. The extension is used by some
editors (such as emacs) to choose the editing mode.
* Time stamp files have moved from /var/run/sudo to either
/var/db/sudo, /var/lib/sudo or /var/adm/sudo. The directories
are checked for existence in that order. This prevents users
from receiving the sudo lecture every time the system reboots.
Time stamp files older than the boot time are ignored on systems
where it is possible to determine this.
* Ancillary documentation (README files, LICENSE, etc) is now
installed in a sudo documentation directory.
* Sudo now recognizes "tls_cacert" as an alias for "tls_cacertfile"
in ldap.conf.
* Defaults settings that are tied to a user, host or command may
now include the negation operator. For example:
Defaults:!millert lecture
will match any user but millert.
* The default PATH environment variable, used when no PATH variable
exists, now includes /usr/sbin and /sbin.
* Sudo now uses polypkg for cross-platform packing.
* On Linux, sudo will now restore the nproc resource limit before
executing a command, unless the limit appears to have been
modified by pam_limits. This avoids a problem with bash scripts
that open more than 32 descriptors on SuSE Linux, where
sysconf(_SC_CHILD_MAX) will return -1 when RLIMIT_NPROC is set
to RLIMIT_UNLIMITED (-1).
* Visudo will now treat an unrecognized Defaults entry as a parse
error (sudo will warn but still run).
* The HOME and MAIL environment variables are now reset based on
the target user's password database entry when the env_reset
sudoers option is enabled (which is the case in the default
configuration). Users wishing to preserve the original values
should use a sudoers entry like:
Defaults env_keep += HOME
to preserve the old value of HOME and
Defaults env_keep += MAIL
to preserve the old value of MAIL.
* The tty_tickets option is now on by default.
* Fixed a problem in the restoration of the AIX authdb registry
setting.
* If PAM is in use, wait until the process has finished before
closing the PAM session.
* Fixed "sudo -i -u user" where user has no shell listed in the
password database.
* When logging I/O, sudo now handles pty read/write returning ENXIO,
as seen on FreeBSD when the login session has been killed.
* Sudo now performs I/O logging in the C locale. This avoids
locale-related issues when parsing floating point numbers in the
timing file.
* Added support for Ubuntu-style admin flag dot files.
Major changes between version 1.7.2p8 and 1.7.3:
* Support for logging a command's input and output as well as the
ability to replay sessions. For more information, see the
documentation for the log_input and log_output Defaults options
in the sudoers manual. Also see the sudoreplay manual for
information on replaying I/O log sessions.
* The use_pty sudoers option can be used to force a command to be
run in a pseudo-pty, even when I/O logging is not enabled.
* On some systems, sudo can now detect when a user has logged out
and back in again when tty-based time stamps are in use.
Supported systems include Solaris systems with the devices file
system, Mac OS X, and Linux systems with the devpts filesystem
(pseudo-ttys only).
* On AIX systems, the registry setting in /etc/security/user is
now taken into account when looking up users and groups.
Sudo now applies the correct the user and group ids when running
a command as a user whose account details come from a different
source (e.g. LDAP or DCE vs. local files).
* Support for multiple sudoers_base and uri entries in ldap.conf.
When multiple entries are listed, sudo will try each one in the
order in which they are specified.
* Sudo's SELinux support should now function correctly when running
commands as a non-root user and when one of stdin, stdout or stderr
is not a terminal.
* Sudo will now use the Linux audit system with configure with the
--with-linux-audit flag.
* Sudo now uses mbr_check_membership() on systems that support it
to determine group membership. Currently, only Darwin (Mac OS X)
supports this.
* When the tty_tickets sudoers option is enabled but there is no
terminal device, sudo will no longer use or create a tty-based
ticket file. Previously, sudo would use a tty name of "unknown".
As a consequence, if a user has no terminal device, sudo will now
always prompt for a password.
* The passwd_timeout and timestamp_timeout options may now be
specified as floating point numbers for more granular timeout
values.
* Negating the fqdn option in sudoers now works correctly when sudo
is configured with the --with-fqdn option. In previous versions
of sudo the fqdn was set before sudoers was parsed.
|
|
|
|
* pkgsrc change: relax restriction to kerberos package.
What's new in Sudo 1.7.0?
* Rewritten parser that converts sudoers into a set of data structures.
This eliminates a number of ordering issues and makes it possible to
apply sudoers Defaults entries before searching for the command.
It also adds support for per-command Defaults specifications.
* Sudoers now supports a #include facility to allow the inclusion of other
sudoers-format files.
* Sudo's -l (list) flag has been enhanced:
o applicable Defaults options are now listed
o a command argument can be specified for testing whether a user
may run a specific command.
o a new -U flag can be used in conjunction with "sudo -l" to allow
root (or a user with "sudo ALL") list another user's privileges.
* A new -g flag has been added to allow the user to specify a
primary group to run the command as. The sudoers syntax has been
extended to include a group section in the Runas specification.
* A uid may now be used anywhere a username is valid.
* The "secure_path" run-time Defaults option has been restored.
* Password and group data is now cached for fast lookups.
* The file descriptor at which sudo starts closing all open files is now
configurable via sudoers and, optionally, the command line.
* Visudo will now warn about aliases that are defined but not used.
* The -i and -s command line flags now take an optional command
to be run via the shell. Previously, the argument was passed
to the shell as a script to run.
* Improved LDAP support. SASL authentication may now be used in
conjunction when connecting to an LDAP server. The krb5_ccname
parameter in ldap.conf may be used to enable Kerberos.
* Support for /etc/nsswitch.conf. LDAP users may now use nsswitch.conf
to specify the sudoers order. E.g.:
sudoers: ldap files
to check LDAP, then /etc/sudoers. The default is "files", even
when LDAP support is compiled in. This differs from sudo 1.6
where LDAP was always consulted first.
* Support for /etc/environment on AIX and Linux. If sudo is run
with the -i flag, the contents of /etc/environment are used to
populate the new environment that is passed to the command being
run.
* If no terminal is available or if the new -A flag is specified,
sudo will use a helper program to read the password if one is
configured. Typically, this is a graphical password prompter
such as ssh-askpass.
* A new Defaults option, "mailfrom" that sets the value of the
"From:" field in the warning/error mail. If unspecified, the
login name of the invoking user is used.
* A new Defaults option, "env_file" that refers to a file containing
environment variables to be set in the command being run.
* A new flag, -n, may be used to indicate that sudo should not
prompt the user for a password and, instead, exit with an error
if authentication is required.
* If sudo needs to prompt for a password and it is unable to disable
echo (and no askpass program is defined), it will refuse to run
unless the "visiblepw" Defaults option has been specified.
* Prior to version 1.7.0, hitting enter/return at the Password: prompt
would exit sudo. In sudo 1.7.0 and beyond, this is treated as
an empty password. To exit sudo, the user must press ^C or ^D
at the prompt.
* visudo will now check the sudoers file owner and mode in -c (check)
mode when the -s (strict) flag is specified.
|
|
653) Fixed installation of sudo_noexec.so on AIX.
654) Updated libtool to version 1.5.26.
655) Fixed printing of default SELinux role and type in -V mode.
656) The HOME environment variable is once again preserved by default,
as per the documentation.
|
|
and visudo manpages in man/man1, and the sudoers manpage in man/man5.
Remove the platform-specific PLISTs that only differed in the location
of the man pages.
Bump the PKGREVISION to 5.
|