| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* Bug-fix release
|
|
${INSTALL}. This should fix the problem seen in minskim's Linux bulk build.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
determine whether to install in PREFIX/share. Just do it anyway.
|
|
|
|
|
|
|
|
to make it consistent with the non-static package.
|
|
Changes that improve compatibility w/ the Sixth Edition Unix shell
are marked w/ a `C:' in the details below.
-------------------------------------------------------------------------------
[osh-041028]:
*.1:
* Fixed a few typos in osh.1 and sh6.1.
* Did a little fine tuning of osh.1 and sh6.1 to hopefully
eliminate some incomplete and/or unclear explanations.
* Did the same for both if.1 and goto.1.
osh and sh6:
* Fixed an annoying bug introduced in the previous release...
The way error messages were printed in error() was not accounting
for the fact that the standard error stream is quite often (if not
always) unbuffered by default. This could make some error messages
difficult to read when a pipeline was involved. A little example:
Before (unfixed):
% foo|bar|baz
foo: not foundbar: not foundbaz: not found
After (fixed):
% foo|bar|baz
foo: not found
bar: not found
baz: not found
-------------------------------------------------------------------------------
[osh-041018]:
This release includes sh6 in addition to osh, if, and goto.
Sh6 is simply osh without the enhancements. It is built from the
same sources as osh, but it is not built or installed by default.
Makefile:
* Added targets for sh6 so that it can optionally be built, tested,
and installed if desired.
osh and sh6:
* Split the code into modules.
This is primarily for developer sanity... ;)
The new files are osh.h, main.c, parse.c, and exec.c.
* If (geteuid() != getuid() || getegid() != getgid()) is true,
print a nice error message and exit with a status of 2.
* Strip all NUL characters from the shell's standard input as it is
being read into the command line buffer. Input to the shell is
expected to be text.
* Changed the way the shell handles non-seekable files.
This is for both initialization files (osh only) and command files.
Do not block on open(2); open it and determine if it is a regular
file (or seekable). If it is not a regular file or is not seekable,
exit with an error. If seekable, reset the file for blocking I/O
and continue as normal.
Note that you can still read commands from FIFOs if you want.
Instead of doing `osh myfifo', you can either do `osh <myfifo'
or `osh - my list of positional parameters <myfifo'.
* Changed the error handling to use stdarg(3).
This allows for more code consistency and makes it easier
to handle all errors with just one line of code.
osh only:
* Added another possible initialization file for osh: $HOME/.oshrc
Osh only attempts to execute commands from this file if it is an
interactive shell. In the case of a login shell, osh tries this
file only after it tries both /etc/osh.login and $HOME/.osh.login.
* Made osh less strict about errors in initialization files.
Previously, common shell-detected errors in any of the files
were generally treated in the same way as they would have been
treated in a command file (i.e., the error was fatal). Realizing
that this potentially caused difficulty and annoyance for the user,
I opted to change it so that these types of errors are handled as
they are when osh is interactive.
This should make it easier for the user to debug
initialization files if needed.
* Added a `source' special command.
It is functionally similar to the way this command works in csh(1).
See osh(1) for details.
if:
* Changed ARGMAX from 50 to 256.
* If (geteuid() != getuid() || getegid() != getgid()) is true,
print a nice error message and exit with a status of 2.
* Added a few new primaries: `-h', `-s', `-t', and `-x'
See if(1) for details.
goto:
* Changed the size of the label buffer from 128 to 1024.
* Do not require the `:' of a labelled line to appear in column 1.
Instead, allow the `:' to optionally be preceded by blanks so that
labelled lines can be indented in command files. See goto(1) for
more details if needed.
* Eliminated unnecessary calls to strcmp(3) whenever a possible label
cannot possibly match the label argument given on the command line.
* Give an error if any NUL character is encountered in the input.
* Give an error if a zero-length string is given as the label argument.
-------------------------------------------------------------------------------
[osh-040812]:
osh.c:
* Changed the way unused pipe descriptors are handled in the child
process after fork(). This fixes a bug where the pipe in a pipeline
such as `( cat /dev/zero ) | sleep 1' would never enter an EOF state.
Previously, the close-on-exec flag was being set for the descriptors
in question. Of course, this did not work for the above and similar
cases. So, the descriptors in question are now close()d explicitly.
* Made some final changes to globbing to allow for more sensible
behaviour WRT quoting. The functions affected are: globargs(),
globchar(), and striparg(). Read and/or run `tests/glob_test.osh'
for details of the user-visible changes. This script may cause
previous versions of the shell to dump core.
Basically, since striparg() had always been called *after* glob(3)
and since the path names generated by glob(3) cannot be trusted, it
ends up that the best course of action is to call striparg() *before*
glob(3). This relatively simple change fixes a variety of *possible*
problems related to globbing.
-------------------------------------------------------------------------------
[osh-040731]:
osh.c:
* Added bounds checking to striparg() to protect against a possible
buffer overflow. Though this is unlikely to happen in the general
case, it is certainly *not* impossible. This function had been
unprotected since at least osh-020214.
* Added a new diagnostic, `Arg too long', to go with the
above-mentioned change.
* Removed the `No directory' diagnostic from globargs().
It was simply not worth the trouble. In compatible mode,
the `No match' diagnostic provides sufficient compatibility
in my opinion...
* Changed the `chdir' command so that it only attempts to change to
the previous working directory when the `-' argument is *not* quoted.
This alows the shell to change to a directory by that name.
For example:
% mkdir -; chdir -; pwd; chdir \-; pwd; chdir -; pwd; rmdir -
chdir: no old directory
/home/jneitzel/osh_stuff/osh-040731
/home/jneitzel/osh_stuff/osh-040731/-
/home/jneitzel/osh_stuff/osh-040731
Remember that "-" or '-' has the same effect as the \- used above.
This is perhaps a little silly, but I figure if a directory *can*
exist then it should be possible to change to it.
* Fixed the `<-' redirection argument so that it adheres to the
documentation. This fixes a file descriptor leak in addition
to the incorrect behaviour. It should be silently ignored in
the following case: `echo hello | grep h <-'; now it is.
-------------------------------------------------------------------------------
[osh-040723]:
osh.c:
C: Fixed a small idiosyncrasy with the `No directory' and `No match'
diagnostics when running in compatible mode. For example:
Before:
% if -d . -a -r . echo "`.' is a readable directory.";\
echo foo*; echo ?; echo []
`.' is a readable directory.
No match
No match
No directory
After:
% if -d . -a -r . echo "`.' is a readable directory.";\
echo foo*; echo ?; echo []
`.' is a readable directory.
No match
No match
No match
The shell should only print `No directory' when a directory
does not exist (ENOENT) or cannot be read (EACCES). Yes, it is
expected that invalid patterns such as `[' and `[]' result in
the shell printing a `No match' diagnostic.
* Changed the `<--' input redirection argument to `<-' instead.
This seems more consistent and will allow for possibly clearer
documentation in the future (if and when I add another feature
I've been thinking about).
fd2.[1c]:
* Removed the fd2 utility and its manual page because of
possible licensing issues.
-------------------------------------------------------------------------------
[osh-040718]:
This release is made primarily to synchronize with the new branch
of the shell which is named `sh6'.
osh.1:
* More revisions and clarifications...
-------------------------------------------------------------------------------
[osh-040714]:
Makefile:
* Refined the description for _XOPEN_SOURCE a little.
osh.1:
* General improvements...
This includes documenting some things that have never been very well
documented in this shell.
osh.c:
C: Made changes to globbing which affect the shell in compatible mode.
This includes the addition of the `No directory' diagnostic which
was present in /etc/glob from Sixth Edition Unix. Also, it looks
like I had previously misinterpreted exactly when the `No match'
diagnostic was supposed to be printed. Now, when running in
compatible mode the shell really is compatible. Yay =)
* Added a `umask' special command.
* Disallow SIGCHLD from being trapped.
When this signal is requested in a `trap' command, it is quietly
disallowed. This is the same behaviour seen with both SIGKILL and
SIGSTOP. Thus, doing a `trap + 9 17 20' quietly has no effect.
* Made changes to how the shell builds a command's argument vector.
Previously, malloc(3) was used. Now, each command in the command
line is simply split into `\0'-terminated words. Each argument is
actually a pointer to the corresponding word in the command line.
The changes to parameter substitution in osh-040628 made this
a perfectly sensible course of action. This change also gives
a microscopic improvement in run-time performance (as judged
by time(1)).
The only remaining use of malloc(3) in the shell's execution stage
can be found in globargs().
-------------------------------------------------------------------------------
[osh-040628]:
Thanks to Stephen M. Jones for suggesting that osh should be able
to read a global rc file. Thanks to Stephen C. VanDahm for assisting
with some portability issues found in osh-040421. Thanks also to
Josep Portella Florit for reviewing osh-040421, making several useful
suggestions, and sending patches.
BTW, many changes were made to the manual pages.
I hope they are clear, but I trust that if they are not then someone
might be kind enough to tell me so and/or make suggestions.
Some new files are included:
examples/*: initialization file examples
fd2.[1c]: the fd2 utility
Makefile:
* Added some notes about _XOPEN_SOURCE.
* Added a target to optionally build and install fd2.
* Removed the compile-time definition of `CLONE'.
This is now a run-time option which can be toggled in order to
enable or disable enhancements to the shell.
osh.c:
C: Changed how the shell does parameter substitution.
This was the last major incompatibility w/ the Thompson shell.
Now, substitution is done *before* any command-line parsing
takes place.
* Added the ability for login shells to read the initialization files
/etc/osh.login and/or $HOME/.osh.login if they exist. A shell is
considered to be a login shell if its first argument starts w/ a
`-' character (e.g., -osh).
* Added a `set' command to allow shell compatibility to be toggled
at run time. In addition, the shell now checks for `OSH_COMPAT'
in the environment to tell future invocations of the shell which
mode the user wishes to run in.
* In addition to the `set' command mentioned above, the following
special built-in commands have been added and are available when
the shell is in "noclone" mode:
exec, setenv, trap, unsetenv
* In globargs(), use `gl_pathc == 0' to detect an unmatched pattern
instead of checking if glob(3) returned `GLOB_NOMATCH'. This allows
for those cases where glob(3) may not be POSIX-compliant.
* Made osh command files that are run asynchronously ignore interrupts.
For example, `osh runcom&' should ignore SIGINT and SIGQUIT, and now
it does.
* Reverted a so-called compatibility fix made in osh-040421.
Now, ignore SIGINT and SIGQUIT for asynchronous commands invoked
from a command file. From a usability perspective, it is simply
too annoying to not do it this way.
* Changed the `exit' command so that it always terminates a shell when
reading commands from a file. Previously, it only terminated a shell
when invoked as `osh file'. Note that `exit' still has no effect for
interactive shells or `osh -c command'; this is intentional as it is
compatible w/ the behaviour of `exit' under the Thompson shell.
if.c:
* Include stdlib.h for exit(3) so that OS X doesn't complain.
* Rename exp() to expr() to avoid conflicts w/ exp(3) on OS X.
Strange, as math.h is not included there should not have been
any conflict. Oh well, it is fixed now.
* Enable this utility to return a meaningful exit status to the user.
In short, `if foo = foo' returns an exit status of 0; `if foo = bar'
returns an exit status of 1. Previously, exit status was always 0.
* Made the usage less ambiguous; corrected the documentation to reflect
the actual behaviour. In short, usage is (and always has been) as
follows:
if expr [command [arg ...]]
* Added some useful conditional primaries for constructing expressions.
See the manual pages for details.
* Use the stdio(3) functions instead of write(2) for printing
the error messages.
* In addition, added some useful diagnostic messages which were
inspired by the test(1) utility from Seventh Edition Unix.
goto.c:
* Give an error message when standard input is not seekable.
Previously, a label not found error would be produced instead.
fd2.c:
* A new utility and manual page... It is an adaptation of the PWB/Unix
(roughly PWB/1.0 ?) redirect diagnostic output command. The original
source came from the file `spencer_pwb.tar.gz' which can be found at:
http://www.tuhs.org/Archive/PDP-11/Distributions/usdl/
|
|
Suggested by Roland Illig, ok'd by various.
|
|
afflicted platform).
|
|
|
|
Reported by mochida at Netside.
|
|
character, so remove it from the ast-ksh make.probe.
|
|
|
|
following the semantic change of PKG_DEFAULT_OPTIONS.
|
|
if wctype_t is not available. Bump PKGREVISION.
|
|
enable/disable multibyte support. Ok'ed by wiz@.
|
|
fixes by me.
|
|
uses its own, and there isn't any test in the configure script.
Pointed out by wiz@.
|
|
|
|
our existing bash package already is called bash2.
If you want to see the new features, please take a look at the NEWS file.
|
|
in the process. (More information on tech-pkg.)
Bump PKGREVISION and BUILDLINK_DEPENDS of all packages using libtool and
installing .la files.
Bump PKGREVISION (only) of all packages depending directly on the above
via a buildlink3 include.
|
|
|
|
patch provided by pancake at phreaker.net in PR 26777
changes (from Debian changelog):
posh (0.3.9) unstable; urgency=medium
* trap builtin now errors when no signals are specified.
closes: #265103.
* Move trap-related regression tests to their own file,
and add one to check for error on "trap 0".
posh (0.3.8) unstable; urgency=high
* Fix tilde expansion thinko introduced in 0.3.4.
posh (0.3.7) unstable; urgency=low
* Remove some cruft left around from ksh functions.
posh (0.3.6) unstable; urgency=low
* Add a better regression test for umask.
* Drop support of ksh88 ":[#%]+"-type trimming.
* Adjust regression tests to make sure ${blah:#blah} gives
an error.
posh (0.3.5) unstable; urgency=low
* Clean unused variables left after 0.3.4.
* Add prebuild target to debian/rules.
* Drop qsort altogether.
posh (0.3.4) unstable; urgency=low
* Fix most of the signedness comparison warnings.
* Remove homedir caching code.
* Switch specials, keywords, aliases, builtins, vars, and funs hashes
to use libc tsearch() and friends.
* Remove old table hash routines.
posh (0.3.3) unstable; urgency=low
* Rename custom table functions to prevent conflicts with
b-tree functions when search.h is included.
* Remove vestigial tracked alias code.
posh (0.3.2) unstable; urgency=low
* Make getn() use strtol().
* Mark unused function parameters to avoid gcc warnings.
posh (0.3.1) unstable; urgency=low
* Use libc's instead of internal qsort.
* Add -W to CFLAGS.
|
|
|
|
which are the full option names used to set rpath directives for the
linker and the compiler, respectively. In places were we are invoking
the linker, use "${LINKER_RPATH_FLAG} <path>", where the space is
inserted in case the flag is a word, e.g. -rpath. The default values
of *_RPATH_FLAG are set by the compiler/*.mk files, depending on the
compiler that you use. They may be overridden on a ${OPSYS}-specific
basis by setting _OPSYS_LINKER_RPATH_FLAG and _OPSYS_COMPILER_RPATH_FLAG,
respectively. Garbage-collect _OPSYS_RPATH_NAME and _COMPILER_LD_FLAG.
|
|
Roland Illig in PR pkg/26604.
|
|
into the bsd.options.mk framework. Instead of appending to
${PKG_OPTIONS_VAR}, it appends to PKG_DEFAULT_OPTIONS. This causes
the default options to be the union of PKG_DEFAULT_OPTIONS and any
old USE_* and FOO_USE_* settings.
This fixes PR pkg/26590.
|
|
from the run time shared library path instead of trying to defeat its
option parser.
|
|
1.) Only create a dynamically linked "zsh" binary if "MKDYNAMICROOT"
is defined and set to "yes". This way people who still use statically
linked binaries on their root filesystem will get a static binary.
2.) Link the "zsh" binary so that it use "/libexec/ld.elf_so" and
shared libraries from "/lib". It now works without the "/usr"
filesystem being mounted.
|
|
dynamic library support on the root partition (e.g. 2.0 and newer). It is
enough that the "zsh" binary does *not* depend on its own shared libraries
which won't be on the root partition and we get a shell with proper I18N
support this way. Approved by Masao Uebayashi.
|
|
Changes since zsh version 4.2.0
-------------------------------
- The autoload and related builtins take options -k and -z to indicate
ksh or zsh autoloading style for given functions, making it possible
to mix and match.
- Assignments to associative arrays can use the i and r index flags.
For example,
assoc[(i)alpha*]=bravo
sets the value for the element whose key matches the pattern `alpha*';
assoc[(r)activ*]=passive
sets the value for the element whose current value matches the pattern
`activ*'.
- The glob qualifier F indicates a non-empty directory. Hence *(F)
indicates all subdirectories with entries, *(/^F) means all
subdirectories with no entries.
- fc -p and fc -P provide push/pop for the status of the shell's
history (both internal and using the history file). With automatic
scoping (fc -ap) it becomes easy to use a temporary history in a
function. This has been added to the calculator function zcalc to make
its internal history work more seamlessly.
- A new `try block' and `always block' syntax has been introduced
to make it easier to ensure the shell runs important tidy-up code
in the event of an error. It also runs after a break, continue, or
return, including a return forced by the ERR_RETURN option
(but not an exit, which is immediate). The syntax is:
`{' try-block-list `}' `always' `{' always-block-list `}'
where no newline or semicolon may appear between `}' and `always'.
This is compatible with all previous valid zsh syntax as an `always'
at that point used to be a syntax error. For example,
{ echo Code run in current shell } always { echo Tidy-up code }
- A new zle widget reset-prompt has been added to re-expand the current
prompt. Changes to the variable in use as well as changes in its
expanions are both taken into account. The same effect is now forced by
a job change notification, making the %j prompt escape and %(j..) ternary
expression more useful.
- The zftp module supports ports following the hostname in the normal suffix
notation, `host:port'. This requires IPv6 colon-style addresses to be
specified in suitably quoted square brackets, for example:
zftp open '[f000::baaa]'
zftp open '[f000::baaa]:ftp'
(the two are equivalent).
- Special traps, those that don't correspond to signals, i.e. ZERR, DEBUG
and EXIT are no longer executed inside other traps. This caused
unnecessary confusion if, for example, both DEBUG and EXIT traps
were set. The new behaviour is more compatible with other shells.
- New option TRAPS_ASYNC which if set allows traps to run while the
shell is waiting for a child process. This is the traditional zsh
behaviour; POSIX requires the option to be unset. In sh/ksh
compatibility mode the option is turned off by default and the option
letter -T turns it on, for compatibility with FreeBSD sh.
|
|
Reported by Roland Illig, PR26623.
|
|
|
|
in PR pkg/25946.
|
|
Addresses request on tech-pkg@ by Georg Schwarz.
|
|
previous patches disabled it on NetBSD unconditionally. Bump PKGREVISION.
Pointed out by Kibum Han. Thanks to junyoung@ for testing.
OK'ed by schmonz@ and wiz@.
|
|
|
|
|
|
minor changes by me.
XSH is a fast and powerful command-line XML editor. It may be used to
query and modify XML documents. XSH may be used either interactivelly or
for off-line processing (like bash). XPath expressions are used to
select parts of XML document to be processed.
Both system shell and perl are accessible from XSH in a very natural
way. XSH itself is written in Perl and uses XML::LibXML bindings of
gnome-xml2 library in the background level.
|
|
36. V6.13.00 - 20040519
35. V6.12.03 - 20040322
34. turn on kanji and dspmbyte by default; add check for utf8 locales,
and turn parsing of that automatically based on $LANG.
33. Fix compilation issue under Windows/NT and charset incorrect patch
(Yoshiyuki Sakakibara)
32. completion additions (Tom Warzeka)
31. compilation fix (Martin Kraemer)
30. V6.12.02 - 20040221
29. Glob completion listing addition (Tom Warzeka)
28. BS2000 bs2cmd builtin. (Martin Kraemer)
27. Fix interrupt resetting code when /etc startup scripts have syntax errors
(Mark A. Grondona)
26. Clarification of kill-ring commands (Per Hedeland)
25. Debian completion additions (Martin Godisch)
24. Japanese character set fixes (Juehiro-san) from debian
23. NLS charset fixes; disabled since they only work with gnu gencat
(Martin Godisch)
22. Fix HPUX >= 11 resource (Jack Cummings)
21. Handle breaksw that jumps out of loops.
20. Revert #16. It causes worse problems.
19. Avoid using execl() because the last NULL does not always promoted to
a pointer because the function is variadic (Harti Brandt)
18. revert ignoreeof to the 6.11.00 behavior and document it (Martin Godisch)
17. do a case insensitive comparison for the multibyte vars (Martin Godisch)
16. don't sigsuspend() for an already exited job
15. glob all arguments in source (Martin Godisch)
14. various debian fixes (Martin Godisch)
13. setenv syntax check revert (Satoshi I. Nozawa)
12. EAGAIN typo (dan harkless)
11. filec compilation issue on hpux (beebe)
10. win32 compilation fixes for O_LARGEFILE (amol)
9. Don't go into an infinite loop when tcgetpgrp() returns an error.
8. Cygwin fixes (Corinna Vinschen)
7. NLS catclose() bug avoidance (KAJIMOTO Masato)
6. V6.12.01 - 20030208
5. Misc NT cleanup. No more GPL code (amol)
4. use strtol() to detect errors in builtin kill (Peter Jeremy)
3. Recognize linux systems on mips* (Maciej W. Rozycki)
2. Enable complete=igncase on unix (Stephen Krauth)
1. Eliminate maxitems (Todd Miller)
|
|
(for example under IRIX64 using gcc, where it otherwise will produce
32bit object files). Patch that.
|
