summaryrefslogtreecommitdiff
path: root/sysutils
AgeCommit message (Collapse)AuthorFilesLines
1999-11-16Defuzzify, and while there, update to 1.8a31. Changes:hubertf5-53/+35
ALL: - libscg now got official version number 0.1 and allows version checking - libscg/scsi-aix.c compiles again - typo fixed. - libscg/scsi-bsd-os.c compiles again - typo fixed. - libscg/scsi-beos.c compiles again - typo fixed. - libscg/scsi-osf.c compiles again - typo fixed. - libscg/scsi-wnt.c compiles again - typo fixed. - libscg/scsiopen.c typecasts to make it compile without warnings on K&R systems. - usleep() emulation compiles again on SCO Openserver 3.x - align_test.c corrected - scg/scgcmd.h restructured - several macros to convert integers in network byte order to machine byte order modified to make them correct on 64 bit machines too. - usleep() prototype disabled in libport.h (needed for SCO Openserver) - New supported architecture 9000-777-hp-ux - Added support for the new smake source distribution. - Added new AUTOMAKE support for the makefile system when using smake. The makefile system will now support compilation on unknown platforms if compilation is done with smake. cdrecord: - prints warning if an unofficial version of libscg is used - removed a bug that caused an endless loop if a TEAC-CDR 50 /55 was present without a media. This bug has been introduced when tryint to find a workaround for a bug in the Ricoh 7040 firmware. - The Optima Dis Covery 650 CD-R is now recognised as Sony-CDU-924 - typecasts in several files to make it compile without warnings on K&R systems. - Fixed a bug in the size computation that caused the media to loos 150 sectors too large if cdrecord was run in DAO mode. - New updated macros in intcvt.h make cdrecord more correct on 64 bit machines. - Next_writable Address disabled for CD-ROM drives. This will abort is someone tries to do a cdrecord -msinfo on a CD-ROM drive. Before, this resulted in bad values now it results in an error message. - Sector size should now be restored in any case. Added 5 new cases. cdda2wav: o new ioctl module for Solaris and FreeBSD ioctl methods (ATAPI drives). Untested yet. o soundcard support unified. Solaris sound interfaces might be used under other OS as well. Untested yet. o support of the cdindex system (see www.cdindex.org for details). For cd extra and cd-text formats the submission form is generated automatically. o Fixed a bug that caused the last *.inf file not to be written on OS/2
1999-11-14Update lsof to 4.46.frueauf2-5/+5
4.46 October 23, 1999 Corrected /proc-based Linux lsof to detect that an IPv6 address is a mapped IPv4 address. The problem was reported and analyzed by Arkadiusz Miskiewicz <misiek@misiek.eu.org>, who also tested the fix. Added a libc5 library /dev/kmem-based Linux lsof circumvention, supplied by Jason Lingohr <lingman@lucid.net.au>. Corrected a bug in -t (terse) AIX output, reported by Wendy Lin <af5@taiyang.cc.purdue.edu>. I introduced the bug at revision 4.43 when adding FILE_FLAG reporting. This was offered as a patch to 4.45. Added a work-around for a problem in the OpenBSD 2.3 <sys/pipe.h> header file. Volker Borchert <bt@teknon.de> provided and tested it. Improved description of cross-building lsof for a 64 bit Solaris 7 system on a 32 bit system with suggestions from Phillip Edwards <Philip.Edwards@sn.wpafb.af.mil>. Fixed a gawk POSIX-mode pattern error in the Linux /dev/kmem-based Mksrc script, based on a tip from Ambrose C. Li <acli@mingpaoxpress.com>. Fixed a bug in the Tru64 UNIX IPv6 handling, courtesy of a report from Casper Dik <casper@holland.sun.com>. Enabled support for OpenBSD 2.6. Enabled support for BSDI 4.1, based on a report from Jeffrey C Honig <jch@bsdi.com> that only a Configure script change is necessary. Enabled Configure script to use gcc for building lsof for a 64 bit Solaris 7 and 8 kernels, if the gcc version is 2.95 or above. Improved -i option handling for systems with IPv6 support so that it will search for a host name in both IPv4 and IPv6 families, when that is possible. As a companion modification, changed -V processing to report a single error when a multiple host name match is requested. Casper Dik <casper@holland.Sun.COM> helped test. Fixed a DEC OSF/1, Digital UNIX, Tru64 UNIX repeat mode bug, reported by Mayer Ilovitz <mayer@cooper.edu>. Mayer helped test the fix. The fix was offered as a patch to 4.45. Changed Solaris socket file recognition scheme, so it is (nearly) the same through Solaris 8, where the previous clone device scheme no longer works. With significant assistance from Casper Dik, added support for Solaris 8 Beta and Beta refresh. The IPv6 support in Solaris 8 is still in some flux, so there are temporary compensations for the differences between Beta IPv6 support and Beta refresh IPv6 support. Casper and I hope those differences disappear by FCS. Improved the delivery of information on Solaris 2.5.1, 2.6, 7, and 8 door files. Fixed a repeat mode bug that surfaces when /etc/passwd changes between cycles. The bug report and diagnostic help were supplied by Igor Schein <igor@txc.com>. The fix was offered as a patch to 4.45. Added support for INRIA IPv6 to NetBSD. Jean-Luc Richier <Jean-Luc.Richier@imag.fr> provided patches and a test system on which to verify them. Added support for AIX 4.3.3. Jeff W. Stewart <jws@anaconda.cc.purdue.edu> provided a test system. Made adjustments for FreeBSD 4.0-current. Improved reporting of information for AIX sockets that lack protocol control blocks.
1999-11-12defuzzrh2-10/+10
1999-11-11Teach this beast how we want our su(8) called.hubertf2-1/+22
1999-11-11add full path for apm(8) and halt(8)hubertf2-6/+6
1999-11-09Oh, impolitic profanities... Solaris doesn't know about INADDR_NONE either.abs2-5/+5
"Sun, the dot in half-a-decade-behind-the-rest-of-the-world.com"
1999-11-09Drift back into the dark ages and use inet_addr() instead of inet_aton().abs2-7/+8
For Solaris and similarly handicapped systems.
1999-11-09Fix bug which would cause source linked files to sometimes copiedabs3-3/+23
separately. Just for posterity, here is how to replicate the problem: (All this is going back to the maintainers) #!/bin/sh # Generates a 'from' directory, then runs cfengine to copy it into 'to'. # The order of file creation in the from directory is significant - # the 'bad' file must be picked up _after_ the 'subdir'. # Obvious caveats about IRIX XFS notwithstanding. TESTDIR=/tmp/cfenginetest rm -rf $TESTDIR mkdir -p $TESTDIR cd $TESTDIR # Generate cfengine.conf cat > cfengine.conf <<END control: actionsequence = ( copy ) copy: $TESTDIR/from dest=$TESTDIR/to recurse=inf END # Generate 'from' directory mkdir from cd from touch ok mkdir subdir touch bad cd subdir ln ../ok ln ../bad cd ../.. cfengine -v echo echo "Both 'ok' and 'bad' should have the same number of links (2) in both" echo "'from' and 'to' directories. 'bad' will have 1 if bug is present." echo ls -l from to
1999-11-07add k-dependencyhubertf2-2/+6
1999-11-06add & enable klavghubertf1-1/+2
1999-11-06This is a small KDE applet showing load everage graph on thehubertf8-0/+124
panel. You could customise colours, refresh rate. It also allows to execute some command on click. After start it puts itself in the docking area on the panel. If session support is enabled, it will restart itself next time user logs in. Pressing righ mouse button shows menu. Pressing left mouse button executes configured command.
1999-11-05Upgrade to 1.5.3abs4-12/+12
1999-11-05Add cfengine to sysutils SUBDIRSabs5-3/+62
Add patches to set the correct Class based on the netmask (in the process of submitting all patches back to the maintainer)
1999-11-02add & enable kapmhubertf1-1/+2
1999-11-02KDE-based APM utility (battery monitor).hubertf9-0/+238
Whacked heavily to work on NetBSD.
1999-11-02On ports that don't define UPAGES, calculate it from USPACE andhubertf2-0/+31
the port's pagesize. Thanks to Chris Demetriou for his help! Fixes PR 8728 by Dan McMahill <mcmahill@mtl.mit.edu>
1999-11-02s/X11BASE/X11/ as pointed out by bad.soren1-2/+2
1999-11-02USE_X11BASE=YES for shared library handling.soren1-1/+2
1999-11-01Add "gtop".tron1-1/+2
1999-11-01Import new "gtop" package:tron5-0/+23
GNOME system monitor - top like, memory graphs, processes detailed view This package belongs to the GNOME 1.0.53 release.
1999-10-31add & enable lavapshubertf1-1/+2
1999-10-31Lavalamp-like process status display, with memory usage giving the sizehubertf5-0/+31
of the blobs, and the brightness and movement speed according to a process's CPU usage.
1999-10-31Displays status of your laptop's battery.hubertf8-0/+57
1999-10-31add & enable xbatthubertf1-2/+2
1999-10-27Update a little so this package compiles in both 1.4 and later.augustss2-6/+4
BROKEN flag removed.
1999-10-27Mark packages as broken, where necessary.agc1-1/+3
1999-10-25Teach kdf to look for libungif instead of libgif.jlam3-8/+17
1999-10-23Update "gmc" package to version 4.5.40 included in GNOME 1.0.53 release.tron7-25/+76
1999-10-23Update "mc" package to version 4.5.40 included in GNOME 1.0.53 release.tron7-26/+68
1999-10-23Use wildcard dependences for "gnome-libs" and "gnome-core" packages.tron1-2/+2
1999-10-22Use wildcard dependence for "glib" package.tron1-2/+2
1999-10-22Fix permissions and she-bang line, to make "hfs" script work.fredb3-9/+48
1999-10-17Add and enable xhfs.fredb1-1/+2
1999-10-17Use devel/libhfs.fredb5-3/+54
1999-10-17Initial import of xhfs, Tcl/Tk counterpart to hfsutils.fredb7-0/+105
1999-10-15Update dependeny on libslang to 1.3.9mjl2-4/+4
1999-10-11Update package so it compiles again.augustss2-4/+4
1999-10-10cfengine-1.52abs8-0/+92
Automate configuration and administration of large systems
1999-10-09Sync.mycroft2-4/+5
1999-10-09Make this build on PowerPC.mycroft2-4/+38
1999-10-07Remove me as maintainer of those packages.tron4-8/+8
1999-10-06Update asapm to 2.7. Minor changes in color options.jlam3-8/+16
1999-10-05Add and enable genpasswd.kim1-1/+2
1999-10-05Generate random passwords that are pronouncible in Finnish.kim5-0/+25
Useful for assigning an initial password to new accounts (has an option to output the encrypted form of the password also).
1999-10-05Fix OSTYPE - it's bsd-44, not bsd-4.4.hubertf1-2/+2
1999-10-05Got wrong file from cache...kim1-2/+2
1999-10-04Update to 1.0:kim2-4/+4
- knows about /var/run/syslogd.pid, which is what our current syslogd is creating (even if this is against the manual page of syslogd) - proc-newstally tweak (a very local proc script)
1999-10-01Oops.kim2-2/+6
1999-10-01Add and enable logtime, roller and sh-utils.kim1-1/+4
1999-10-01Another tool to roll your logs.kim5-0/+46
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-04 12:33:30 +0000