From c3d09ade8a7b8090c3e2cf55e52b44963d487144 Mon Sep 17 00:00:00 2001 From: xtraeme Date: Tue, 20 Feb 2007 23:00:08 +0000 Subject: Initial import of fuse-lzofs-20060306. LZOlayer Filesystem is a filesystem which allows you to use transparently compressed files, just as they would be normal files. Both read and write operations are possible, along with other most common system calls. It consumes little memory in my opinion, because files are divided into blocks, which can be decompressed separetly. In other words, if you (or an application) would like to read byte 4,500,000 in a file sized 5,000,000 bytes, it only decompresses a block which constain wanted data. Write operation is based on a packet gathering and after reaching its limit it 'syncs' the data. It allows it's user to write/modify files pretty fast, despite the fact it's block divided. LZOlayer FileSystem was meant to support only LZO compression algorythm, because it has extremely low compression/decompression time. However, currently it supports LZO and ZLIB (but only one at the run-time!) compression algorythms. --- filesystems/fuse-lzofs/DESCR | 16 ++++++ filesystems/fuse-lzofs/Makefile | 24 +++++++++ filesystems/fuse-lzofs/PLIST | 2 + filesystems/fuse-lzofs/distinfo | 7 +++ filesystems/fuse-lzofs/patches/patch-aa | 22 +++++++++ filesystems/fuse-lzofs/patches/patch-ab | 87 +++++++++++++++++++++++++++++++++ 6 files changed, 158 insertions(+) create mode 100644 filesystems/fuse-lzofs/DESCR create mode 100644 filesystems/fuse-lzofs/Makefile create mode 100644 filesystems/fuse-lzofs/PLIST create mode 100644 filesystems/fuse-lzofs/distinfo create mode 100644 filesystems/fuse-lzofs/patches/patch-aa create mode 100644 filesystems/fuse-lzofs/patches/patch-ab (limited to 'filesystems/fuse-lzofs') diff --git a/filesystems/fuse-lzofs/DESCR b/filesystems/fuse-lzofs/DESCR new file mode 100644 index 00000000000..fe56c45324f --- /dev/null +++ b/filesystems/fuse-lzofs/DESCR @@ -0,0 +1,16 @@ +LZOlayer Filesystem is a filesystem which allows you to use transparently +compressed files, just as they would be normal files. + +Both read and write operations are possible, along with other most common +system calls. It consumes little memory in my opinion, because files are +divided into blocks, which can be decompressed separetly. In other words, +if you (or an application) would like to read byte 4,500,000 in a file +sized 5,000,000 bytes, it only decompresses a block which constain wanted +data. Write operation is based on a packet gathering and after reaching its +limit it 'syncs' the data. It allows it's user to write/modify files pretty +fast, despite the fact it's block divided. + +LZOlayer FileSystem was meant to support only LZO compression algorythm, +because it has extremely low compression/decompression time. However, +currently it supports LZO and ZLIB (but only one at the run-time!) +compression algorythms. diff --git a/filesystems/fuse-lzofs/Makefile b/filesystems/fuse-lzofs/Makefile new file mode 100644 index 00000000000..bc5de5f7608 --- /dev/null +++ b/filesystems/fuse-lzofs/Makefile @@ -0,0 +1,24 @@ +# $NetBSD: Makefile,v 1.1.1.1 2007/02/20 23:00:08 xtraeme Exp $ +# + +DISTNAME= LZOlayer_fs-20060306 +PKGNAME= fuse-${DISTNAME:S/LZOlayer_fs/lzofs/} +CATEGORIES= sysutils +MASTER_SITES= http://north.one.pl/~kazik/pub/LZOlayer/ + +MAINTAINER= pkgsrc-users@NetBSD.org +HOMEPAGE= http://north.one.pl/~kazik/pub/LZOlayer/ +COMMENT= Filesystem which allows you to use transparently compressed files + +USE_TOOLS+= gmake +NO_CONFIGURE= yes +BUILD_TARGET= default + +INSTALLATION_DIRS= bin + +do-install: + ${INSTALL_PROGRAM} ${WRKSRC}/lzo_fs ${PREFIX}/bin/lzo_fs + +.include "../../archivers/lzo/buildlink3.mk" +.include "../../mk/fuse.buildlink3.mk" +.include "../../mk/bsd.pkg.mk" diff --git a/filesystems/fuse-lzofs/PLIST b/filesystems/fuse-lzofs/PLIST new file mode 100644 index 00000000000..a1b16fc7ea7 --- /dev/null +++ b/filesystems/fuse-lzofs/PLIST @@ -0,0 +1,2 @@ +@comment $NetBSD: PLIST,v 1.1.1.1 2007/02/20 23:00:08 xtraeme Exp $ +bin/lzo_fs diff --git a/filesystems/fuse-lzofs/distinfo b/filesystems/fuse-lzofs/distinfo new file mode 100644 index 00000000000..9f376241b73 --- /dev/null +++ b/filesystems/fuse-lzofs/distinfo @@ -0,0 +1,7 @@ +$NetBSD: distinfo,v 1.1.1.1 2007/02/20 23:00:08 xtraeme Exp $ + +SHA1 (LZOlayer_fs-20060306.tar.gz) = f069142a32d9b2325784329500689cc0dd726285 +RMD160 (LZOlayer_fs-20060306.tar.gz) = a9f839950368706b3c90cc5195168f6616947e40 +Size (LZOlayer_fs-20060306.tar.gz) = 17669 bytes +SHA1 (patch-aa) = 70df68443cb7b4d9eec5effea0dbb0e3fc666551 +SHA1 (patch-ab) = 1c14076c136e410d5590e009d8f83bcf2173a5c9 diff --git a/filesystems/fuse-lzofs/patches/patch-aa b/filesystems/fuse-lzofs/patches/patch-aa new file mode 100644 index 00000000000..fe4c1e723d3 --- /dev/null +++ b/filesystems/fuse-lzofs/patches/patch-aa @@ -0,0 +1,22 @@ +$NetBSD: patch-aa,v 1.1.1.1 2007/02/20 23:00:08 xtraeme Exp $ + +--- Makefile.orig 2006-03-06 14:42:15.000000000 +0100 ++++ Makefile 2007-02-18 16:48:11.000000000 +0100 +@@ -1,5 +1,6 @@ +-CFLAGS= -Wall -g -D_FILE_OFFSET_BITS=64 -I/usr/include/lzo/ -O2 -s -fomit-frame-pointer +-LIBS= -lfuse -lz -llzo2 ++CFLAGS+= -Wall -D_FILE_OFFSET_BITS=64 -I${PREFIX}/include -fomit-frame-pointer ++LIBS+= -lfuse -lz -llzo2 ++LDFLAGS+= -L${PREFIX}/lib -Wl,-R${PREFIX}/lib + + default: lzo_fs + +@@ -8,7 +9,7 @@ + + + lzo_fs: LZOlayer_fs.c +- gcc -o $@ $^ -g $(CFLAGS) $(LIBS) ++ gcc -o $@ $^ -g $(CFLAGS) $(LDFLAGS) $(LIBS) + + + clean: diff --git a/filesystems/fuse-lzofs/patches/patch-ab b/filesystems/fuse-lzofs/patches/patch-ab new file mode 100644 index 00000000000..e28ac1c7c67 --- /dev/null +++ b/filesystems/fuse-lzofs/patches/patch-ab @@ -0,0 +1,87 @@ +$NetBSD: patch-ab,v 1.1.1.1 2007/02/20 23:00:08 xtraeme Exp $ + +--- LZOlayer_fs.c.orig 2007-02-18 16:38:19.000000000 +0100 ++++ LZOlayer_fs.c 2007-02-18 16:43:03.000000000 +0100 +@@ -21,6 +21,15 @@ + #define __USE_UNIX98 + #include + #include ++#ifndef __NetBSD__ ++#define ordwr O_RDWR|O_LARGEFILE ++#define ordonly O_RDONLY|O_LARGEFILE ++#define owronly O_WRONLY|O_LARGEFILE ++#else ++#define ordwr O_RDWR ++#define ordonly O_RDONLY ++#define owronly O_WRONLY ++#endif + + #include "minilzo.h" + #define HEAP_ALLOC(var, size) \ +@@ -124,7 +133,7 @@ + + if (S_ISREG(stbuf->st_mode)) + { +- int fd = open(xPath, O_RDONLY|O_LARGEFILE); ++ int fd = open(xPath, ordonly); + read(fd, &stbuf->st_size, sizeof(off_t)); + close(fd); + } +@@ -166,7 +175,7 @@ + { + char *xPath = LZOlayer_makePath(path); + +- int fd = open(xPath, O_RDONLY|O_LARGEFILE); ++ int fd = open(xPath, ordonly); + off_t outLen = 0; + read(fd, &outLen, sizeof(off_t)); + close(fd); +@@ -193,7 +202,7 @@ + char *xPath = filePtr->path; + + int done = 0; +- int fd = open(xPath, O_RDONLY|O_LARGEFILE); ++ int fd = open(xPath, ordonly); + + while(1) + { +@@ -249,7 +258,7 @@ + off_t block_start = (float)filePtr->packets[min_offset].offset / (float)block_size; + + char *xPath = filePtr->path; +- int fd = open(xPath, O_RDWR|O_LARGEFILE); ++ int fd = open(xPath, ordwr); + LZOlayer_block_seek(fd, block_start); + + off_t alloc_size = (filePtr->size-(block_start*block_size) +@@ -315,10 +324,10 @@ + { + LZOlayer_packet_sync(path, fi); + +- int fd = open(filePtr->path, O_WRONLY|O_LARGEFILE); ++ int fd = open(filePtr->path, owronly); + if(fd == -1) + { +- open(filePtr->path, O_CREAT|O_WRONLY|O_LARGEFILE); ++ open(filePtr->path, O_CREAT|owronly); + chown(filePtr->path, fuse_get_context()->uid, fuse_get_context()->gid); + } + // old open/create for write +@@ -365,7 +374,7 @@ + } + else + { +- int fd = open(xPath, O_WRONLY|O_LARGEFILE); ++ int fd = open(xPath, owronly); + off_t null = 0; + write(fd, &null, sizeof(off_t)); + write(fd, &null, sizeof(off_t)); +@@ -383,7 +392,7 @@ + { + char *xPath = LZOlayer_makePath(path); + +- int fd = open(xPath, O_RDWR|O_LARGEFILE); ++ int fd = open(xPath, ordwr); + off_t file_size = 0; + read(fd, &file_size, sizeof(off_t)); + -- cgit v1.2.3