$NetBSD: patch-ax,v 1.1 2004/05/11 12:18:37 wiz Exp $ --- readme.h.orig 1997-10-05 16:18:16.000000000 +0200 +++ readme.h @@ -1,133 +1,133 @@ -#define strim " -amp MPEG audio decoder readme file (version 0.7.6) -(C) Tomislav Uzelac 1996,1997 - -amp is free software and can be _used_ freely by anyone. If you want to -do anything else with it, be sure to check the Legal section of this -document for legal issues. - -THERE IS NO WARRANTY FOR THIS PROGRAM. Please check out the Legal section -of this document. - -1. Introduction -2. Installation -3. Running -4. Feedback -5. Contributing -6. Legal - - -1. Introduction - -amp (Audio Mpeg Player) is an MPEG audio decoder which I originally started -putting together as a side project of the MPEG hardware design project at -FER/Zagreb - just to confirm my knowledge of the standard. It works with -both MPEG1 and MPEG2 audio streams (except for the multichannel extensions -defined in MPEG2), layers 2 and 3. - -There is a gui for amp, written in Tcl/Tk by Edouard Lafargue. It is -available at the amp home site ftp://ftp.rasip.fer.hr - -Another gui supported is the Sajber Jukebox, written by Joel Lindholm - - -The following people contributed their time and knowledge to amp: -Karl Anders Oygard, Ilkka Karvinen, Lutz Vieweg, Dan Nelson, -Edouard Lafargue, Andrew Richards, George Colouris, -Dmitry Boldyrev, Andy Lo A Foe, Thomas Sailer - -amp home location is - ftp://ftp.rasip.fer.hr/pub/mpeg/ - -and the mailing list: send 'HELP' in the body of the message to: - multimedia@rasip.fer.hr - -If you want to find out more about MPEG, best places to start are - http://www.mpeg.org - http://www.mpeg2.de - - -2. Installation - -Installation should be simple enough if amp was ported to your system, -just do a - -./configure -make - -You can edit the makefile further to suit your system. If configure fails -to make a usable Makefile, you'll _have_ to edit it yourself. - -Linux users should try real-time playing support, as described -in doc/realtime.txt. Some people that might pass on this feature are -those with slower machines (i.e. 486's), or SMP systems (see the -doc/linuxrealtime.txt file). -Some versions of the linux C library produce an error when compiling -amp with realtime support. A quick fix is to edit /usr/include/sched.h -and replace _P in the offending line with __P. - -./configure --enable-realtime -make -chown root.root amp -chmod u+s amp - - -3. Running: - -'amp -h' gives you usage & options. If your computer is on the slower -side, direct playback might not work, but you can decode it -to .wav or raw pcm and play it later. - - -4. Feedback - -Send in your makefiles, opinions, bugreports, fixes; anything related to this -program. You can also send me unlimited amounts of money, sugar, milk, etc. - -If you find any mpeg audio files that amp has trouble decoding, please tell -me about this via e-mail . - - -5. Contributing - -Please contribute to amp. If you want to know what is going on in amp -development, you can join the developers mailing list - - mpeg_audio_developers@rasip.fer.hr - -There are certain debugging facilities that I made in amp, but are disabled -in the current release (they are neither nice nor user-friendly). If anyone -enhances them (they are in dump.c) to the point that they're actually -usable I'll be happy to include the changes in the release. I think this -kind of debug output would be very useful to people studying these audio -algorithms. - - -6. Legal - -This software can be used freely for any purpose. It can be distributed -freely, as long as it is not sold commercially without permission from -Tomislav Uzelac . However, including this software -on CD_ROMs containing other free software is explicitly permitted even -when a modest distribution fee is charged for the CD, as long as this -software is not a primary selling argument for the CD. - -Building derived versions of this software is permitted, as long as they -are not sold commercially without permission from Tomislav Uzelac -. Any derived versions must be clearly marked as -such, and must be called by a name other than amp. Any derived versions -must retain this copyright notice. - -/* This license is itself copied from Tatu Ylonen's ssh package. It does - * not mention being copyrighted itself :) - */ - -THERE IS NO WARRANTY FOR THIS PROGRAM - whatsoever. You use it entirely -at your risk, and neither Tomislav Uzelac, nor FER will be liable for -any damages that might occur to your computer, software, etc. in -consequence of you using this freeware program. - - -Tomislav Uzelac - +#define strim "\ +amp MPEG audio decoder readme file (version 0.7.6)\n\ +(C) Tomislav Uzelac 1996,1997\n\ +\n\ +amp is free software and can be _used_ freely by anyone. If you want to\n\ +do anything else with it, be sure to check the Legal section of this\n\ +document for legal issues.\n\ +\n\ +THERE IS NO WARRANTY FOR THIS PROGRAM. Please check out the Legal section\n\ +of this document.\n\ +\n\ +1. Introduction\n\ +2. Installation\n\ +3. Running\n\ +4. Feedback\n\ +5. Contributing\n\ +6. Legal\n\ +\n\ +\n\ +1. Introduction\n\ +\n\ +amp (Audio Mpeg Player) is an MPEG audio decoder which I originally started \n\ +putting together as a side project of the MPEG hardware design project at \n\ +FER/Zagreb - just to confirm my knowledge of the standard. It works with\n\ +both MPEG1 and MPEG2 audio streams (except for the multichannel extensions\n\ +defined in MPEG2), layers 2 and 3. \n\ +\n\ +There is a gui for amp, written in Tcl/Tk by Edouard Lafargue. It is \n\ +available at the amp home site ftp://ftp.rasip.fer.hr\n\ +\n\ +Another gui supported is the Sajber Jukebox, written by Joel Lindholm \n\ +\n\ +\n\ +The following people contributed their time and knowledge to amp:\n\ +Karl Anders Oygard, Ilkka Karvinen, Lutz Vieweg, Dan Nelson,\n\ +Edouard Lafargue, Andrew Richards, George Colouris,\n\ +Dmitry Boldyrev, Andy Lo A Foe, Thomas Sailer\n\ +\n\ +amp home location is\n\ + ftp://ftp.rasip.fer.hr/pub/mpeg/\n\ +\n\ +and the mailing list: send 'HELP' in the body of the message to:\n\ + multimedia@rasip.fer.hr\n\ +\n\ +If you want to find out more about MPEG, best places to start are\n\ + http://www.mpeg.org\n\ + http://www.mpeg2.de \n\ +\n\ +\n\ +2. Installation\n\ +\n\ +Installation should be simple enough if amp was ported to your system,\n\ +just do a \n\ +\n\ +./configure\n\ +make \n\ +\n\ +You can edit the makefile further to suit your system. If configure fails \n\ +to make a usable Makefile, you'll _have_ to edit it yourself.\n\ +\n\ +Linux users should try real-time playing support, as described\n\ +in doc/realtime.txt. Some people that might pass on this feature are\n\ +those with slower machines (i.e. 486's), or SMP systems (see the\n\ +doc/linuxrealtime.txt file). \n\ +Some versions of the linux C library produce an error when compiling\n\ +amp with realtime support. A quick fix is to edit /usr/include/sched.h\n\ +and replace _P in the offending line with __P.\n\ +\n\ +./configure --enable-realtime\n\ +make\n\ +chown root.root amp\n\ +chmod u+s amp\n\ +\n\ +\n\ +3. Running:\n\ +\n\ +'amp -h' gives you usage & options. If your computer is on the slower\n\ +side, direct playback might not work, but you can decode it\n\ +to .wav or raw pcm and play it later.\n\ +\n\ +\n\ +4. Feedback\n\ +\n\ +Send in your makefiles, opinions, bugreports, fixes; anything related to this\n\ +program. You can also send me unlimited amounts of money, sugar, milk, etc.\n\ +\n\ +If you find any mpeg audio files that amp has trouble decoding, please tell\n\ +me about this via e-mail .\n\ +\n\ +\n\ +5. Contributing\n\ +\n\ +Please contribute to amp. If you want to know what is going on in amp \n\ +development, you can join the developers mailing list\n\ +\n\ + mpeg_audio_developers@rasip.fer.hr\n\ +\n\ +There are certain debugging facilities that I made in amp, but are disabled\n\ +in the current release (they are neither nice nor user-friendly). If anyone\n\ +enhances them (they are in dump.c) to the point that they're actually\n\ +usable I'll be happy to include the changes in the release. I think this\n\ +kind of debug output would be very useful to people studying these audio\n\ +algorithms.\n\ +\n\ +\n\ +6. Legal\n\ +\n\ +This software can be used freely for any purpose. It can be distributed\n\ +freely, as long as it is not sold commercially without permission from\n\ +Tomislav Uzelac . However, including this software\n\ +on CD_ROMs containing other free software is explicitly permitted even \n\ +when a modest distribution fee is charged for the CD, as long as this\n\ +software is not a primary selling argument for the CD.\n\ +\n\ +Building derived versions of this software is permitted, as long as they\n\ +are not sold commercially without permission from Tomislav Uzelac \n\ +. Any derived versions must be clearly marked as\n\ +such, and must be called by a name other than amp. Any derived versions\n\ +must retain this copyright notice.\n\ +\n\ +/* This license is itself copied from Tatu Ylonen's ssh package. It does \n\ + * not mention being copyrighted itself :)\n\ + */\n\ +\n\ +THERE IS NO WARRANTY FOR THIS PROGRAM - whatsoever. You use it entirely\n\ +at your risk, and neither Tomislav Uzelac, nor FER will be liable for\n\ +any damages that might occur to your computer, software, etc. in\n\ +consequence of you using this freeware program.\n\ +\n\ +\n\ +Tomislav Uzelac\n\ +\n\ "