Copyright © 1994-2020 The NetBSD Foundation, Inc
$NetBSD: pkgsrc.xml,v 1.36 2020/01/03 15:55:24 leot Exp $
Abstract
pkgsrc is a centralized package management system for Unix-like operating systems. This guide provides information for users and developers of pkgsrc. It covers installation of binary and source packages, creation of binary and source packages and a high-level overview about the infrastructure.
Table of Contents
CFLAGS
?Makefile
sPLIST
generationPLIST_SRC
mk.conf
List of Tables
Table of Contents
There is a lot of software freely available for Unix-based systems, which is usually available in form of the source code. Before such software can be used, it needs to be configured to the local system, compiled and installed, and this is exactly what The NetBSD Packages Collection (pkgsrc) does. pkgsrc also has some basic commands to handle binary packages, so that not every user has to build the packages for himself, which is a time-costly task.
pkgsrc currently contains several thousand packages, including:
www/apache24
- The Apache
web server
www/firefox
- The Firefox
web browser
meta-pkgs/gnome
- The GNOME
Desktop Environment
meta-pkgs/kde4
- The K
Desktop Environment
… just to name a few.
pkgsrc has built-in support for handling varying dependencies, such as pthreads and X11, and extended features such as IPv6 support on a range of platforms.
pkgsrc provides the following key features:
Easy building of software from source as well as the creation and installation of binary packages. The source and latest patches are retrieved from a master or mirror download site, checksum verified, then built on your system. Support for binary-only distributions is available for both native platforms and NetBSD emulated platforms.
All packages are installed in a consistent directory tree, including binaries, libraries, man pages and other documentation.
Tracking of package dependencies automatically, including when performing updates, to ensure required packages are installed. The configuration files of various packages are handled automatically during updates, so local changes are preserved.
Like NetBSD, pkgsrc is designed with portability in mind and consists of highly portable code. This allows the greatest speed of development when porting to a new platform. This portability also ensures that pkgsrc is consistent across all platforms.
The installation prefix, acceptable software licenses, international encryption requirements and build-time options for a large number of packages are all set in a simple, central configuration file.
The entire source (not including the distribution files) is freely available under a BSD license, so you may extend and adapt pkgsrc to your needs. Support for local packages and patches is available right out of the box, so you can configure it specifically for your environment.
The following principles are basic to pkgsrc:
“It should only work if it's right.”
— That means, if a package contains bugs, it's better to find
them and to complain about them rather than to just install the package
and hope that it works. There are numerous checks in pkgsrc that try to
find such bugs: Static analysis tools (pkgtools/pkglint
), build-time checks (portability
of shell scripts), and post-installation checks (installed files,
references to shared libraries, script interpreters).
“If it works, it should work everywhere” — Like NetBSD has been ported to many hardware architectures, pkgsrc has been ported to many operating systems. Care is taken that packages behave the same on all platforms.
pkgsrc consists of both a source distribution and a binary distribution for these operating systems. After retrieving the required source or binaries, you can be up and running with pkgsrc in just minutes!
pkgsrc was derived from FreeBSD's ports system, and initially developed for NetBSD only. Since then, pkgsrc has grown a lot, and now supports the following platforms:
Table 1.1. Platforms supported by pkgsrc
Platform | Date Support Added | Notes |
---|---|---|
NetBSD | Aug 1997 | |
Solaris | Mar 1999 | README.Solaris |
Linux | Jun 1999 | README.Linux |
Darwin / Mac OS X / OS X / macOS | Oct 2001 | README.MacOSX |
FreeBSD | Nov 2002 | README.FreeBSD |
OpenBSD | Nov 2002 | README.OpenBSD |
IRIX | Dec 2002 | README.IRIX README.IRIX5.3 |
BSD/OS | Dec 2003 | |
AIX | Dec 2003 | README.AIX |
Interix (Microsoft Windows Services for Unix) | Mar 2004 | README.Interix |
DragonFlyBSD | Oct 2004 | |
OSF/1 | Nov 2004 | README.OSF1 |
HP-UX | Apr 2007 | README.HPUX |
Haiku | Sep 2010 | README.Haiku |
MirBSD | Jan 2011 | |
Minix3 | Nov 2011 | README.Minix3 |
Cygwin | Mar 2013 | README.Cygwin |
GNU/kFreeBSD | Jul 2013 | README.GNUkFreeBSD |
Bitrig | Jun 2014 | README.Bitrig |
This document is divided into three parts. The first, The pkgsrc user's guide, describes how one can use one of the packages in the Package Collection, either by installing a precompiled binary package, or by building one's own copy using the NetBSD package system. The second part, The pkgsrc developer's guide, explains how to prepare a package so it can be easily built by other NetBSD users without knowing about the package's building details. The third part, The pkgsrc infrastructure internals is intended for those who want to understand how pkgsrc is implemented.
This document is available in various formats: HTML, PDF, PS, TXT.
There has been a lot of talk about “ports”, “packages”, etc. so far. Here is a description of all the terminology used within this document.
A set of files and building instructions
that describe what's necessary
to build a certain piece of software using
pkgsrc. Packages are traditionally stored under
/usr/pkgsrc
,
but may be stored in any location,
referred to as PKGSRCDIR
.
This is the former name of “pkgsrc”. It is part of the NetBSD operating system and can be bootstrapped to run on non-NetBSD operating systems as well. It handles building (compiling), installing, and removing of packages.
This term describes the file or files that are
provided by the author of the piece of software to
distribute his work. All the changes necessary to build on
NetBSD are reflected in the corresponding package. Usually
the distfile is in the form of a compressed tar-archive,
but other types are possible, too. Distfiles are usually
stored below
/usr/pkgsrc/distfiles
.
This is the term used by FreeBSD and OpenBSD people for what we call a package. In NetBSD terminology, “port” refers to a different architecture.
A set of binaries built with pkgsrc from a distfile
and stuffed together in a single .tgz
file so it can be installed on machines of the same
machine architecture without the need to
recompile. Packages are usually generated in
/usr/pkgsrc/packages
; there is also
an archive on ftp.NetBSD.org.
Sometimes, this is referred to by the term “package” too, especially in the context of precompiled packages.
The piece of software to be installed which will be constructed from all the files in the distfile by the actions defined in the corresponding package.
The pkgsrc users are people who use the packages provided by pkgsrc. Typically they are system administrators. The people using the software that is inside the packages (maybe called “end users”) are not covered by the pkgsrc guide.
There are two kinds of pkgsrc users: Some only want to install pre-built binary packages. Others build the pkgsrc packages from source, either for installing them directly or for building binary packages themselves. For pkgsrc users Part I, “The pkgsrc user's guide” should provide all necessary documentation.
A package maintainer creates packages as described in Part II, “The pkgsrc developer's guide”.
These people are involved in all those files
that live in the mk/
directory and below.
Only these people should need to read through Part III, “The pkgsrc infrastructure internals”, though others might be curious,
too.
When giving examples for commands, shell prompts are used to
show if the command should/can be issued as root, or if
“normal” user privileges are sufficient. We use a
#
for root's shell prompt, a %
for users'
shell prompt, assuming they use the C-shell or tcsh and a $
for
bourne shell and derivatives.
Table of Contents
CFLAGS
?To get help when using pkgsrc, the definitive source is this document, the pkgsrc guide. If you don't find anything here, there are alternatives:
The built-in pkgsrc help, which is available after bootstrapping
pkgsrc. Run bmake help topic=… to get
help for any topic, such as a variable name like
BUILD_DEFS
, a make target like
do-build, a missing C or C++ function like
strcasecmp or any other topic.
The available help topics are listed in Appendix D, Help topics.
To see the value of a single variable, run bmake
show-var VARNAME=X
.
To see the values of the most common variables, run
bmake show-all. These variables are grouped by
topic. To see the variables for a single topic, run
bmake
show-all-topic
, for example
bmake show-all-fetch.
The pkgsrc-users mailing list, to which you can subscribe and then ask your questions.
The #pkgsrc IRC channel, which is accessible via a web browser or by using a specialized chat program such as XChat. Pick any user name and join the channel #pkgsrc.
Table of Contents
Before you download and extract the files, you need to decide
where you want to extract them. When using pkgsrc as root user, pkgsrc
is usually installed in /usr/pkgsrc
. You are though
free to install the sources and binary packages wherever you want in
your filesystem, provided that the pathname does not contain white-space
or other characters that are interpreted specially by the shell and some
other programs. A safe bet is to use only letters, digits, underscores
and dashes.
Before you download any pkgsrc files, you should decide
whether you want the current branch or the
stable branch. The latter is forked on a
quarterly basis from the current branch and only gets modified
for security updates. The names of the stable branches are built
from the year and the quarter, for example
2019Q4
.
The second step is to decide how you want to download pkgsrc. You can get it as a tar file or via CVS. Both ways are described here.
Note that tar archive contains CVS working copy. Thus you can switch to using CVS at any later time.
The primary download location for all pkgsrc files is https://cdn.NetBSD.org/pub/pkgsrc/ or ftp://ftp.NetBSD.org/pub/pkgsrc/ (it points to the same location). There are a number of subdirectories for different purposes, which are described in detail in Appendix C, Directory layout of the pkgsrc FTP server.
The tar archive for the current branch is in the directory
current
and is called pkgsrc.tar.gz
.
It is autogenerated weekly.
To save download time we provide bzip2- and
xz-compressed archives which are published at
pkgsrc.tar.bz2
and
pkgsrc.tar.xz
respectively.
You can fetch the same files using FTP.
The tar file for the stable branch 2019Q4 is in the
directory pkgsrc-2019Q4
and is also called pkgsrc.tar.gz
.
To download the latest pkgsrc stable tarball, run:
$
ftp ftp://ftp.NetBSD.org/pub/pkgsrc/pkgsrc-2019Q4/pkgsrc.tar.gz
If you prefer, you can also fetch it using "wget", "curl", or your web browser.
Then, extract it with:
$
tar -xzf pkgsrc.tar.gz -C /usr
This will create the directory pkgsrc/
in /usr/
and all the package source will be
stored under /usr/pkgsrc/
.
To download pkgsrc-current, run:
$
ftp ftp://ftp.NetBSD.org/pub/pkgsrc/current/pkgsrc.tar.gz
To fetch a specific pkgsrc stable branch, run:
$
cd /usr && cvs -q -z2 -d anoncvs@anoncvs.NetBSD.org:/cvsroot checkout -r pkgsrc-2019Q4 -P pkgsrc
This will create the directory pkgsrc/
in your /usr/
directory and all the package source
will be stored under /usr/pkgsrc/
.
To fetch the pkgsrc current branch, run:
$
cd /usr && cvs -q -z2 -d anoncvs@anoncvs.NetBSD.org:/cvsroot checkout -P pkgsrc
Refer to the list of available mirrors to choose a faster CVS mirror, if needed.
If you get error messages from rsh
, you need to set CVS_RSH variable. E.g.:
$
cd /usr && env CVS_RSH=ssh cvs -q -z2 -d anoncvs@anoncvs.NetBSD.org:/cvsroot checkout -P pkgsrc
Refer to documentation on your command shell how to set CVS_RSH=ssh permanently.
For Bourne shells, you can set it in your .profile
or better globally in /etc/profile
:
# set CVS remote shell command CVS_RSH=ssh export CVS_RSH
By default, CVS doesn't do things like most people would expect it to do.
But there is a way to convince CVS, by creating a file called .cvsrc
in your home directory and saving the following lines to it.
This file will save you lots of headache and some bug reports, so we strongly recommend it.
You can find an explanation of this file in the CVS documentation.
# recommended CVS configuration file from the pkgsrc guide cvs -q checkout -P update -dP diff -upN rdiff -u release -d
The preferred way to keep pkgsrc up-to-date is via CVS (which also works if you have first installed it via a tar file). It saves bandwidth and hard disk activity, compared to downloading the tar file again.
When updating from a tar file, you first need to completely remove the old pkgsrc directory. Otherwise those files that have been removed from pkgsrc in the mean time will not be removed on your local disk, resulting in inconsistencies. When removing the old files, any changes that you have done to the pkgsrc files will be lost after updating. Therefore updating via CVS is strongly recommended.
Note that by default the distfiles and the binary packages
are saved in the pkgsrc tree, so don't forget to rescue them
before updating. You can also configure pkgsrc to store distfiles
and packages in directories outside the pkgsrc tree by setting the
DISTDIR
and PACKAGES
variables. See Chapter 6, Configuring pkgsrc for the details.
To update pkgsrc from a tar file, download the tar file as explained above. Then, make sure that you have not made any changes to the files in the pkgsrc directory. Remove the pkgsrc directory and extract the new tar file. Done.
To update pkgsrc via CVS, change to the pkgsrc
directory and run cvs:
$
cd /usr/pkgsrc && cvs update -dP
If you get error messages from rsh
, you need to set CVS_RSH variable as described above. E.g.:
$
cd /usr/pkgsrc && env CVS_RSH=ssh cvs up -dP
When updating pkgsrc, the CVS program keeps track of the branch you selected. But if you, for whatever reason, want to switch from the stable branch to the current one, you can do it by adding the option “-A” after the “update” keyword. To switch from the current branch back to the stable branch, add the “-rpkgsrc-2019Q4” option.
When you update pkgsrc, the CVS program will only touch those files that are registered in the CVS repository. That means that any packages that you created on your own will stay unmodified. If you change files that are managed by CVS, later updates will try to merge your changes with those that have been done by others. See the CVS manual, chapter “update” for details.
Table of Contents
pkgsrc can be bootstrapped for use in two different modes: privileged and unprivileged one. In unprivileged mode in contrast to privileged one all programs are installed under one particular user and cannot utilise privileged operations (packages don't create special users and all special file permissions like setuid are ignored).
Installing the bootstrap kit from source should be as simple as:
#
env CVS_RSH=ssh cvs -d anoncvs@anoncvs.NetBSD.org:/cvsroot checkout -P pkgsrc
#
cd pkgsrc/bootstrap
#
./bootstrap
To bootstrap in unprivileged mode pass “--unprivileged” flag to bootstrap
By default, in privileged mode pkgsrc uses
/usr/pkg
for prefix
where programs will be installed in,
and /usr/pkg/pkgdb
for the package database
directory where pkgsrc will do its internal bookkeeping,
/var
is used as varbase,
where packages install their persistent data.
In unprivileged mode pkgsrc uses
~/pkg
for prefix,
~/pkg/pkgdb
for the package database,
and ~/pkg/var
for varbase.
You can change default layout using command-line arguments. Run “./bootstrap --help” to get details.
The bootstrap installs a bmake tool. Use this bmake when building via pkgsrc. For examples in this guide, use bmake instead of “make”.
It is possible to bootstrap multiple instances of pkgsrc using non-intersecting directories. Use bmake corresponding to the installation you're working with to build and install packages.
Table of Contents
Basically, there are two ways of using pkgsrc. The first is to only install the package tools and to use binary packages that someone else has prepared. This is the “pkg” in pkgsrc. The second way is to install the “src” of pkgsrc, too. Then you are able to build your own packages, and you can still use binary packages from someone else.
On the cdn.NetBSD.org site and mirrors, there are collections of binary packages, ready to be installed. These binary packages have been built using the default settings for the directories, that is:
/usr/pkg
for LOCALBASE
, where most of the files are installed,
/usr/pkg/etc
for configuration files,
/var
for VARBASE
, where those files are installed that may change after installation.
If you cannot use these directories for whatever reasons (maybe because you're not root), you cannot use these binary packages, but have to build the packages yourself, which is explained in Section 4.2, “Bootstrapping pkgsrc”.
To install binary packages, you first need to know from where
to get them. The first place where you should look is on the main
pkgsrc FTP server in the directory /pub/pkgsrc/packages
.
This directory contains binary packages for multiple platforms. First, select your operating system. (Ignore the directories with version numbers attached to it, they just exist for legacy reasons.) Then, select your hardware architecture, and in the third step, the OS version and the “version” of pkgsrc.
In this directory, you often find a file called
bootstrap.tar.gz
which contains the package
management tools. If the file is missing, it is likely that your
operating system already provides those tools. Download the file and
extract it in the /
directory. It will create
the directories /usr/pkg
(containing the tools
for managing binary packages and the database of installed packages).
In the directory from the last section, there is a
subdirectory called All/
, which contains all the
binary packages that are available for the platform, excluding those
that may not be distributed via FTP or CDROM (depending on which
medium you are using).
To install packages directly from an FTP or HTTP server, run the following commands in a Bourne-compatible shell (be sure to su to root first):
#
PATH="/usr/pkg/sbin:$PATH"
#
PKG_PATH="http://cdn.NetBSD.org/pub/pkgsrc/packages"
#
PKG_PATH="$PKG_PATH/
OPSYS
/ARCH
/VERSIONS
/All/"#
export PATH PKG_PATH
Instead of URLs, you can also use local paths, for example if
you are installing from a set of CDROMs, DVDs or an NFS-mounted
repository. If you want to install packages from multiple sources,
you can separate them by a semicolon in
PKG_PATH
.
After these preparations, installing a package is very easy:
#
pkg_add libreoffice
#
pkg_add ap24-php71-*
Note that any prerequisite packages needed to run the package in question will be installed, too, assuming they are present where you install from.
Adding packages might install vulnerable packages. Thus you should run pkg_admin audit regularly, especially after installing new packages, and verify that the vulnerabilities are acceptable for your configuration.
After you've installed packages, be sure to have
/usr/pkg/bin
and /usr/pkg/sbin
in your
PATH
so you can actually start the just
installed program.
To deinstall a package, it does not matter whether it was
installed from source code or from a binary package. The
pkg_delete command does not know it anyway.
To delete a package, you can just run pkg_delete
package-name
. The package
name can be given with or without version number. Wildcards can
also be used to deinstall a set of packages, for example
*emacs*
. Be sure to include them in quotes,
so that the shell does not expand them before
pkg_delete
sees them.
The -r
option is very powerful: it
removes all the packages that require the package in question
and then removes the package itself. For example:
#
pkg_delete -r jpeg
will remove jpeg and all the packages that used it; this allows upgrading the jpeg package.
The pkg_info shows information about installed packages or binary package files.
The pkgsrc Security Team and Packages Groups maintain a list of known security vulnerabilities to packages which are (or have been) included in pkgsrc. The list is available from the NetBSD FTP site at http://ftp.NetBSD.org/pub/NetBSD/packages/vulns/pkg-vulnerabilities.
Through pkg_admin fetch-pkg-vulnerabilities, this list can be downloaded automatically, and a security audit of all packages installed on a system can take place.
There are two components to auditing. The first step, pkg_admin fetch-pkg-vulnerabilities, is for downloading the list of vulnerabilities from the NetBSD FTP site. The second step, pkg_admin audit, checks to see if any of your installed packages are vulnerable. If a package is vulnerable, you will see output similar to the following:
Package samba-2.0.9 has a local-root-shell vulnerability, see http://www.samba.org/samba/whatsnew/macroexploit.html
You may wish to have the vulnerabilities file downloaded daily so that it remains current. This may be done by adding an appropriate entry to the root users crontab(5) entry. For example the entry
# Download vulnerabilities file 0 3 * * * /usr/pkg/sbin/pkg_admin fetch-pkg-vulnerabilities >/dev/null 2>&1 # Audit the installed packages and email results to root 9 3 * * * /usr/pkg/sbin/pkg_admin audit |mail -s "Installed package audit result" \ root >/dev/null 2>&1
will update the vulnerability list every day at 3AM, followed by an audit
at 3:09AM. The result of the audit are then emailed to root.
On NetBSD this may be accomplished instead by adding the following
line to /etc/daily.conf
:
fetch_pkg_vulnerabilities=YES
to fetch the vulnerability list from the daily security script. The system
is set to audit the packages by default but can be set explicitly, if
desired (not required), by adding the following line to
/etc/security.conf
:
check_pkg_vulnerabilities=YES
see daily.conf(5) and security.conf(5) for more details.
Install pkgtools/lintpkgsrc
and run
lintpkgsrc with the “-i”
argument to check if your packages are up-to-date, e.g.
%
lintpkgsrc -i
... Version mismatch: 'tcsh' 6.09.00 vs 6.10.00
You can then use make update to update the package on your system and rebuild any dependencies.
After obtaining pkgsrc, the pkgsrc
directory now contains a set of packages, organized into
categories. You can browse the online index of packages, or run
make readme from the pkgsrc
directory to build local README.html
files for
all packages, viewable with any web browser such as www/lynx
or www/firefox
.
The default prefix for installed packages
is /usr/pkg
. If you wish to change this, you
should do so by setting LOCALBASE
in
mk.conf
. You should not try to use multiple
different LOCALBASE
definitions on the same
system (inside a chroot is an exception).
The rest of this chapter assumes that the package is already in pkgsrc. If it is not, see Part II, “The pkgsrc developer's guide” for instructions how to create your own packages.
To build packages from source, you need a working C compiler. On NetBSD, you need to install the “comp” and the “text” distribution sets. If you want to build X11-related packages, the “xbase” and “xcomp” distribution sets are required, too.
The first step for building a package is downloading the distfiles (i.e. the unmodified source). If they have not yet been downloaded, pkgsrc will fetch them automatically.
If you have all files that you need in the
distfiles
directory,
you don't need to connect. If the distfiles are on CD-ROM, you can
mount the CD-ROM on /cdrom
and add:
DISTDIR=/cdrom/pkgsrc/distfiles
to your mk.conf
.
By default a list of distribution sites will be randomly
intermixed to prevent huge load on servers which holding popular
packages (for example, SourceForge.net mirrors). Thus, every
time when you need to fetch yet another distfile all the mirrors
will be tried in new (random) order. You can turn this feature
off by setting MASTER_SORT_RANDOM=NO
(for
PKG_DEVELOPER
s it's already disabled).
You can overwrite some of the major distribution sites to
fit to sites that are close to your own. By setting one or two
variables you can modify the order in which the master sites are
accessed. MASTER_SORT
contains a whitespace
delimited list of domain suffixes.
MASTER_SORT_REGEX
is even more flexible, it
contains a whitespace delimited list of regular expressions. It
has higher priority than MASTER_SORT
. Have a
look at pkgsrc/mk/defaults/mk.conf
to find
some examples. This may save some of your bandwidth and
time.
You can change these settings either in your shell's environment, or,
if you want to keep the settings, by editing the
mk.conf
file,
and adding the definitions there.
If a package depends on many other packages (such as
meta-pkgs/kde4
), the build process may
alternate between periods of
downloading source, and compiling. To ensure you have all the source
downloaded initially you can run the command:
%
make fetch-list | sh
which will output and run a set of shell commands to fetch the
necessary files into the distfiles
directory. You can
also choose to download the files manually.
Once the software has downloaded, any patches will be applied, then it will be compiled for you. This may take some time depending on your computer, and how many other packages the software depends on and their compile time.
If using bootstrap or pkgsrc on a non-NetBSD system, use the pkgsrc bmake command instead of “make” in the examples in this guide.
For example, type
%
cd misc/figlet
%
make
at the shell prompt to build the various components of the package.
The next stage is to actually install the newly compiled program onto your system. Do this by entering:
%
make install
while you are still in the directory for whatever package you are installing.
Installing the package on your system may require you to be root. However, pkgsrc has a just-in-time-su feature, which allows you to only become root for the actual installation step.
That's it, the software should now be installed and setup for use. You can now enter:
%
make clean
to remove the compiled files in the work directory, as you shouldn't need them any more. If other packages were also added to your system (dependencies) to allow your program to compile, you can tidy these up also with the command:
%
make clean-depends
Taking the figlet utility as an example, we can install it on our system by building as shown in Appendix B, Build logs.
The program is installed under the default root of the
packages tree - /usr/pkg
. Should this not
conform to your tastes, set the LOCALBASE
variable in your environment, and it will use that value as the
root of your packages tree. So, to use
/usr/local
, set
LOCALBASE=/usr/local
in your environment.
Please note that you should use a directory which is dedicated to
packages and not shared with other programs (i.e., do not try and
use LOCALBASE=/usr
). Also, you should not try
to add any of your own files or directories (such as
src/
, obj/
, or
pkgsrc/
) below the
LOCALBASE
tree. This is to prevent possible
conflicts between programs and other files installed by the
package system and whatever else may have been installed
there.
Some packages look in mk.conf
to
alter some configuration options at build time. Have a look at
pkgsrc/mk/defaults/mk.conf
to get an overview
of what will be set there by default. Environment variables such
as LOCALBASE
can be set in
mk.conf
to save having to remember to
set them each time you want to use pkgsrc.
Occasionally, people want to “look under the covers” to see what is going on when a package is building or being installed. This may be for debugging purposes, or out of simple curiosity. A number of utility values have been added to help with this.
If you invoke the make(1) command with
PKG_DEBUG_LEVEL=2
, then a huge amount of
information will be displayed. For example,
make patch PKG_DEBUG_LEVEL=2
will show all the commands that are invoked, up to and including the “patch” stage.
If you want to know the value of a certain make(1)
definition, then the VARNAME
definition
should be used, in conjunction with the show-var
target. e.g. to show the expansion of the make(1)
variable LOCALBASE
:
%
make show-var VARNAME=LOCALBASE
/usr/pkg%
If you want to install a binary package that you've either
created yourself (see next section), that you put into
pkgsrc/packages manually or that is located on a remote FTP
server, you can use the "bin-install" target. This target will
install a binary package - if available - via pkg_add(1),
else do a make package. The list of remote FTP
sites searched is kept in the variable
BINPKG_SITES
, which defaults to
ftp.NetBSD.org. Any flags that should be added to pkg_add(1)
can be put into BIN_INSTALL_FLAGS
. See
pkgsrc/mk/defaults/mk.conf
for more
details.
A final word of warning: If you set up a system that has a
non-standard setting for LOCALBASE
, be sure to
set that before any packages are installed, as you cannot use
several directories for the same purpose. Doing so will result in
pkgsrc not being able to properly detect your installed packages,
and fail miserably. Note also that precompiled binary packages are
usually built with the default LOCALBASE
of
/usr/pkg
, and that you should
not install any if you use a non-standard
LOCALBASE
.
Table of Contents
The whole pkgsrc system is configured in a single file, usually
called mk.conf
. In which directory pkgsrc looks for
that file depends on the installation. On NetBSD, when you use
make(1) from the base system, it is in the directory
/etc/
. In all other cases the default location is
${PREFIX}/etc/
, depending on where you told the
bootstrap program to install the binary packages.
The format of the configuration file is that of the usual
BSD-style Makefile
s. The whole pkgsrc configuration
is done by setting variables in this file. Note that you can define all
kinds of variables, and no special error checking (for example for
spelling mistakes) takes place.
The following variables apply to all
pkgsrc packages. A complete list of the variables that can be
configured by the user is available in
mk/defaults/mk.conf
, together with some
comments that describe each variable's intent.
LOCALBASE
: Where
packages will be installed. The default is
/usr/pkg
. Do not mix binary packages
with different LOCALBASE
s!
CROSSBASE
: Where
“cross” category packages will be
installed. The default is
${LOCALBASE}/cross
.
X11BASE
: Where
X11 is installed on the system. The default is
/usr/X11R7
.
DISTDIR
: Where to store the
downloaded copies of the original source distributions used
for building pkgsrc packages. The default is
${PKGSRCDIR}/distfiles
.
PKG_DBDIR
: Where the
database about installed packages is stored. The default is
/usr/pkg/pkgdb
.
MASTER_SITE_OVERRIDE
:
If set, override the packages'
MASTER_SITES
with this value.
MASTER_SITE_BACKUP
:
Backup location(s) for distribution files and patch files
if not found locally or in
${MASTER_SITES}
or
${PATCH_SITES}
respectively.
The defaults is
ftp://ftp.NetBSD.org/pub/pkgsrc/distfiles/${DIST_SUBDIR}/
.
BINPKG_SITES
:
List of sites carrying binary pkgs. rel
and
arch
are replaced with OS
release (“2.0”, etc.) and architecture
(“mipsel”, etc.).
ACCEPTABLE_LICENSES
:
List of acceptable licenses. License names are case-sensitive.
Whenever you try to build a package whose license is not in this
list, you will get an error message. If the license condition is
simple enough, the error message will include specific
instructions on how to change this variable.
PACKAGES
: The top level
directory for the binary packages. The default is
${PKGSRCDIR}/packages
.
WRKOBJDIR
:
The top level directory where, if defined, the separate
working directories will get created, and symbolically
linked to from ${WRKDIR}
(see below).
This is useful for building packages on several
architectures, then ${PKGSRCDIR}
can be NFS-mounted while ${WRKOBJDIR}
is local to every architecture. (It should be noted that
PKGSRCDIR
should not be set by the user
— it is an internal definition which refers to the
root of the pkgsrc tree. It is possible to have many
pkgsrc tree instances.)
LOCALPATCHES
:
Directory for local patches that aren't part of pkgsrc.
See Section 13.3, “patches/*
” for more
information.
PKGMAKECONF
: Location of
the mk.conf
file used by a package's
BSD-style Makefile. If this is not set,
MAKECONF
is set to
/dev/null
to avoid picking up
settings used by builds in /usr/src
.
PKGSRC_KEEP_BIN_PKGSRC
:
By default, binary packages of built packages are
preserved in ${PACKAGES}/All
. Setting
this variable to "no" prevents this.
Packages have to support installation into a
subdirectory of WRKDIR
. This allows a package
to be built, before the actual filesystem is touched. DESTDIR
support exists in two variations:
Basic DESTDIR support means that the package installation and packaging is still run as root.
Full DESTDIR support can run the complete build, installation and packaging as normal user. Root privileges are only needed to add packages.
With basic DESTDIR support, make
clean
needs to be run as root.
Considering the foo/bar
package,
DESTDIR full support can be tested using the following commands
$
id uid=1000(myusername) gid=100(users) groups=100(users),0(wheel)$
mkdir $HOME/packages$
cd $PKGSRCDIR/foo/bar
Verify DESTDIR
full support, no root privileges
should be needed
$
make stage-install
Create a package without root privileges
$
make PACKAGES=$HOME/packages package
For the following command, you must be able to gain root privileges using su(1)
$
make PACKAGES=$HOME/packages install
Then, as a simple user
$
make clean
By default, pkgsrc will use GCC to build packages. This may be overridden by setting the following variables in /etc/mk.conf:
PKGSRC_COMPILER
:This is a list of values specifying the chain of compilers to invoke when building packages. Valid values are:
ccc
:
Compaq C Compilers (Tru64)
ccache
:
compiler cache (chainable)
clang
:
Clang C and Objective-C compiler
distcc
:
distributed C/C++ (chainable)
f2c
:
Fortran 77 to C compiler (chainable)
icc
:
Intel C++ Compiler (Linux)
ido
:
SGI IRIS Development Option cc (IRIX 5)
gcc
:
GNU C/C++ Compiler
hp
:
HP-UX C/aC++ compilers
mipspro
:
Silicon Graphics, Inc. MIPSpro (n32/n64)
mipspro-ucode
:
Silicon Graphics, Inc. MIPSpro (o32)
sunpro
:
Sun Microsystems, Inc. WorkShip/Forte/Sun ONE Studio
xlc
:
IBM's XL C/C++ compiler suite
The default is
“gcc
”. You can use
ccache
and/or
distcc
with an appropriate
PKGSRC_COMPILER
setting,
e.g. “ccache gcc
”. This
variable should always be terminated with a value for
a real compiler. Note that only one real compiler
should be listed (e.g. “sunpro gcc
”
is not allowed).
GCC_REQD
:This specifies the minimum version of GCC to use when building packages. If the system GCC doesn't satisfy this requirement, then pkgsrc will build and install one of the GCC packages to use instead.
PYTHON_VERSION_DEFAULT
:Specifies which version of python to use when several options are available.
PKGSRC_FORTRAN
:Specifies the fortran compiler to use.
The default is g95
, and
gfortran
is an alternative.
GFORTRAN_VERSION
:If PKGSRC_FORTRAN
=
gfortran
is used, this option specifies which
version to use.
If you wish to set the CFLAGS
variable,
please make sure to use the +=
operator
instead of the =
operator:
CFLAGS+= -your -flags
Using CFLAGS=
(i.e. without the
“+”) may lead to problems with packages that
need to add their own flags. You may want to take a look
at the devel/cpuflags
package if you're interested in optimization specifically
for the current CPU.
If you want to pass flags to the linker, both in the configure
step and the build step, you can do this in two ways. Either set
LDFLAGS
or LIBS
. The difference
between the two is that LIBS
will be appended to
the command line, while LDFLAGS
come earlier.
LDFLAGS
is pre-loaded with rpath settings for ELF
machines depending on the setting of USE_IMAKE
or
the inclusion of mk/x11.buildlink3.mk
. As with
CFLAGS
, if you do not wish to override these
settings, use the +=
operator:
LDFLAGS+= -your -linkerflags
PKG_DEVELOPER
:
Run some sanity checks that package developers want:
make sure patches apply with zero fuzz
run check-shlibs to see that all binaries will find their shared libs.
PKG_DEBUG_LEVEL
: The level
of debugging output which is displayed whilst making and
installing the package. The default value for this is 0,
which will not display the commands as they are executed
(normal, default, quiet operation); the value 1 will display
all shell commands before their invocation, and the value 2
will display both the shell commands before their invocation,
as well as their actual execution progress with set
-x.
Some packages have build time options, usually to select between different dependencies, enable optional support for big dependencies or enable experimental features.
To see which options, if any, a package supports, and which options are mutually exclusive, run make show-options, for example:
The following options are supported by this package: ssl Enable SSL support. Exactly one of the following gecko options is required: firefox Use firefox as gecko rendering engine. mozilla Use mozilla as gecko rendering engine. At most one of the following database options may be selected: mysql Enable support for MySQL database. pgsql Enable support for PostgreSQL database. These options are enabled by default: firefox These options are currently enabled: mozilla ssl
The following variables can be defined in
mk.conf
to select which options to
enable for a package: PKG_DEFAULT_OPTIONS
,
which can be used to select or disable options for all packages
that support them, and
PKG_OPTIONS.
,
which can be used to select or disable options specifically for
package pkgbase
pkgbase
. Options listed in
these variables are selected, options preceded by “-”
are disabled. A few examples:
$
grep "PKG.*OPTION"mk.conf
PKG_DEFAULT_OPTIONS= -arts -dvdread -esound PKG_OPTIONS.kdebase= debug -sasl PKG_OPTIONS.apache= suexec
It is important to note that options that were specifically suggested by the package maintainer must be explicitly removed if you do not wish to include the option. If you are unsure you can view the current state with make show-options.
The following settings are consulted in the order given, and the last setting that selects or disables an option is used:
the default options as suggested by the package maintainer
the options implied by the settings of legacy variables (see below)
PKG_DEFAULT_OPTIONS
PKG_OPTIONS.
pkgbase
For groups of mutually exclusive options, the last option selected is used, all others are automatically disabled. If an option of the group is explicitly disabled, the previously selected option, if any, is used. It is an error if no option from a required group of options is selected, and building the package will fail.
Before the options framework was introduced, build options
were selected by setting a variable (often named
USE_
) in
FOO
mk.conf
for each option. To ease
transition to the options framework for the user, these legacy
variables are converted to the appropriate options setting
(PKG_OPTIONS.
)
automatically. A warning is issued to prompt the user to update
pkgbase
mk.conf
to use the options framework
directly. Support for the legacy variables will be removed
eventually.
Table of Contents
Once you have built and installed a package, you can create a binary package which can be installed on another system with pkg_add(1). This saves having to build the same package on a group of hosts and wasting CPU time. It also provides a simple means for others to install your package, should you distribute it.
To create a binary package, change into the appropriate directory in pkgsrc, and run make package:
$
cd misc/figlet
$
make package
This will build and install your package (if not already done),
and then build a binary package from what was installed. You can
then use the pkg_* tools to manipulate
it. Binary packages are created by default in
/usr/pkgsrc/packages
, in the form of a
gzipped tar file. See Section B.2, “Packaging figlet” for a
continuation of the above misc/figlet
example.
See Chapter 23, Submitting and Committing for information on how to submit such a binary package.
Table of Contents
For a number of reasons you may want to build binary packages for a large selected set of packages in pkgsrc or even for all pkgsrc packages. For instance, when you have multiple machines that should run the same software, it is wasted time if they all build their packages themselves from source. Or you may want to build a list of packages you want and check them before deploying onto production system. There is a way of getting a set of binary packages: The bulk build system, or pbulk ("p" stands for "parallel"). This chapter describes how to set it up.
First of all, you have to decide whether you build all packages or a limited set of them. Full bulk builds usually consume a lot more resources, both space and time, than builds for some practical sets of packages. There exists a number of particularly heavy packages that are not actually interesting to a wide audience. For a limited bulk builds you need to make a list of packages you want to build. Note that all their dependencies will be built, so you don't need to track them manually.
During bulk builds various packages are installed and deinstalled
in /usr/pkg
(or whatever LOCALBASE
is),
so make sure that you don't need any package during the builds.
Essentially, you should provide a fresh system, either a chroot environment
or something even more restrictive, depending on what the operating system provides,
or dedicate the whole physical machine.
As a useful side effect this makes sure that bulk builds cannot
break anything in your system. There have been numerous cases where
certain packages tried to install files outside the
LOCALBASE
or wanted to edit some files in
/etc
.
Running a pbulk-style bulk build works roughly as follows:
First, build the pbulk infrastructure in a fresh pkgsrc location.
Then, build each of the packages from a clean installation directory using the infrastructure.
To simplify configuration, we provide the helper script mk/pbulk/pbulk.sh
.
In order to use it, prepare a clear system (real one, chroot environment, jail, zone, virtual machine). Configure network access to fetch distribution files. Create a user with name "pbulk".
Fetch and extract pkgsrc. Use a command like one of these:
#
(cd /usr && ftp -o - https://cdn.NetBSD.org/pub/pkgsrc/current/pkgsrc.tar.gz | tar -zxf-)
#
(cd /usr && fetch -o - https://cdn.NetBSD.org/pub/pkgsrc/current/pkgsrc.tar.gz | tar -zxf-)
#
(cd /usr && cvs -Q -z3 -d anoncvs@anoncvs.NetBSD.org:/cvsroot get -P pkgsrc)
Or any other way that fits (e.g., curl, wget).
Deploy and configure pbulk tools, e.g.:
#
sh pbulk.sh -n # use native make, no bootstrap kit needed (for use on NetBSD)
#
sh pbulk.sh -n -c mk.conf.frag # native, apply settings from given mk.conf fragment
#
sh pbulk.sh -nlc mk.conf.frag # native, apply settings, configure for limited build
mk.conf.frag
is a fragment of
mk.conf
that contains settings you want to
apply to packages you build. For instance,
PKG_DEVELOPER= yes # perform more checks X11_TYPE= modular # use pkgsrc X11 SKIP_LICENSE_CHECK= yes # accept all licences (useful # when building all packages)
If configured for limited list, replace the list in /usr/pbulk/etc/pbulk.list
with your list of packages, one per line without empty lines or comments. E.g.:
www/firefox mail/thunderbird misc/libreoffice4
At this point you can also review configuration in /usr/pbulk/etc
and make final amendments, if wanted.
Start it:
#
/usr/pbulk/bin/bulkbuild
After it finishes, you'll have /mnt
filled with distribution files, binary packages, and reports,
plain text summary in /mnt/bulklog/meta/report.txt
The pbulk.sh
script does not cover all possible use cases.
While being ready to run, it serves as a good starting point to understand and build more complex setups.
The script is kept small enough for better understanding.
The pbulk.sh
script supports running
unprivileged bulk build and helps configuring distributed bulk builds.
A complete bulk build requires lots of disk space. Some of the disk space can be read-only, some other must be writable. Some can be on remote filesystems (such as NFS) and some should be local. Some can be temporary filesystems, others must survive a sudden reboot.
40 GB for the distfiles (read-write, remote, temporary)
30 GB for the binary packages (read-write, remote, permanent)
1 GB for the pkgsrc tree (read-only, remote, permanent)
5 GB for LOCALBASE
(read-write, local, temporary)
10 GB for the log files (read-write, remote, permanent)
5 GB for temporary files (read-write, local, temporary)
After your pkgsrc bulk-build has completed, you may wish to
create a CD-ROM set of the resulting binary packages to assist
in installing packages on other machines. The
pkgtools/cdpack
package provides
a simple tool for creating the ISO 9660 images.
cdpack arranges the packages on the CD-ROMs in a
way that keeps all the dependencies for a given package on the same
CD as that package.
Complete documentation for cdpack is found in the cdpack(1)
man page. The following short example assumes that the binary
packages are left in
/usr/pkgsrc/packages/All
and that
sufficient disk space exists in /u2
to
hold the ISO 9660 images.
#
mkdir /u2/images
#
pkg_add /usr/pkgsrc/packages/All/cdpack
#
cdpack /usr/pkgsrc/packages/All /u2/images
If you wish to include a common set of files
(COPYRIGHT
, README
,
etc.) on each CD in the collection, then you need to create a
directory which contains these files. e.g.
#
mkdir /tmp/common
#
echo "This is a README" > /tmp/common/README
#
echo "Another file" > /tmp/common/COPYING
#
mkdir /tmp/common/bin
#
echo "#!/bin/sh" > /tmp/common/bin/myscript
#
echo "echo Hello world" >> /tmp/common/bin/myscript
#
chmod 755 /tmp/common/bin/myscript
Now create the images:
#
cdpack -x /tmp/common /usr/pkgsrc/packages/All /u2/images
Each image will contain README
,
COPYING
, and bin/myscript
in their root directories.
Table of Contents
The files that are installed by pkgsrc are organized in a way that
is similar to what you find in the /usr
directory
of the base system. But some details are different. This is because
pkgsrc initially came from FreeBSD and had adopted its file system
hierarchy. Later it was largely influenced by NetBSD. But no matter
which operating system you are using pkgsrc with, you can expect the
same layout for pkgsrc.
There are mainly four root directories for pkgsrc, which are all
configurable in the bootstrap/bootstrap
script.
When pkgsrc has been installed as root, the default locations
are:
LOCALBASE= /usr/pkg PKG_SYSCONFBASE= /usr/pkg/etc VARBASE= /var PKG_DBDIR= /usr/pkg/pkgdb
In unprivileged mode (when pkgsrc has been installed as any other user), the default locations are:
LOCALBASE= ${HOME}/pkg PKG_SYSCONFBASE= ${HOME}/pkg/etc VARBASE= ${HOME}/pkg/var PKG_DBDIR= ${HOME}/pkg/pkgdb
What these four directories are for, and what they look like is explained below.
LOCALBASE
corresponds to the
/usr
directory in the base system. It is the
“main” directory where the files are installed and contains
the well-known subdirectories like bin
,
include
, lib
,
share
and
sbin
.
VARBASE
corresponds to
/var
in the base system. Some programs (especially
games, network daemons) need write access to it during normal
operation.
PKG_SYSCONFDIR
corresponds to
/etc
in the base system. It contains configuration
files of the packages, as well as pkgsrc's mk.conf
itself.
The following directories exist in a typical pkgsrc installation
in ${LOCALBASE}
.
bin
Contains executable programs that are intended to be directly used by the end user.
emul
Contains files for the emulation layers of various other operating systems, especially for NetBSD.
etc
(the usual location of
${PKG_SYSCONFDIR}
)Contains the configuration files.
include
Contains headers for the C and C++ programming languages.
info
Contains GNU info files of various packages.
lib
Contains shared and static libraries.
libdata
Contains data files that don't change after
installation. Other data files belong into
${VARBASE}
.
libexec
Contains programs that are not intended to be used by end users, such as helper programs or network daemons.
libexec/cgi-bin
Contains programs that are intended to be executed as CGI scripts by a web server.
man
(the usual value of
${PKGMANDIR}
)Contains brief documentation in form of manual pages.
sbin
Contains programs that are intended to be used only by the super-user.
share
Contains platform-independent data files that don't change after installation.
share/doc
Contains documentation files provided by the packages.
share/examples
Contains example files provided by the packages. Among
others, the original configuration files are saved here and copied to
${PKG_SYSCONFDIR}
during
installation.
share/examples/rc.d
Contains the original files for rc.d scripts.
var
(the usual location of
${VARBASE}
)Contains files that may be modified after installation.
Table of Contents
CFLAGS
?This section contains hints, tips & tricks on special things in pkgsrc that we didn't find a better place for in the previous chapters, and it contains items for both pkgsrc users and developers.
The following mailing lists may be of interest to pkgsrc users:
pkgsrc-users: This is a general purpose list for most issues regarding pkgsrc, regardless of platform, e.g. soliciting user help for pkgsrc configuration, unexpected build failures, using particular packages, upgrading pkgsrc installations, questions regarding the pkgsrc release branches, etc. General announcements or proposals for changes that impact the pkgsrc user community, e.g. major infrastructure changes, new features, package removals, etc., may also be posted.
pkgsrc-bulk: A list where the results of pkgsrc bulk builds are sent and discussed.
pkgsrc-changes: This list is for those who are interested in getting a commit message for every change committed to pkgsrc. It is also available in digest form, meaning one daily message containing all commit messages for changes to the package source tree in that 24 hour period.
To subscribe, do:
%
echo subscribelistname
| mail majordomo@NetBSD.org
Archives for all these mailing lists are available from http://mail-index.NetBSD.org/.
The directory pkgsrc/pkgtools
contains
a number of useful utilities for both users and developers of pkgsrc. This
section attempts only to make the reader aware of some of the utilities and when
they might be useful, and not to duplicate the documentation that comes
with each package.
Utilities used by pkgsrc (automatically installed when needed):
pkgtools/x11-links
:
Symlinks for use by buildlink.
OS tool augmentation (automatically installed when needed):
pkgtools/digest
:
Calculates various kinds of checksums (including SHA3).
pkgtools/libnbcompat
:
Compatibility library for pkgsrc tools.
pkgtools/mtree
: Installed on
non-BSD systems due to lack of native mtree.
pkgtools/pkg_install
:
Up-to-date replacement for
/usr/sbin/pkg_install
, or for use on operating
systems where pkg_install is not present.
Utilities used by pkgsrc (not automatically installed):
pkgtools/pkg_tarup
:
Create a binary package from an
already-installed package. Used by make replace to
save the old package.
pkgtools/dfdisk
:
Adds extra functionality to pkgsrc, allowing it to fetch distfiles
from multiple locations. It currently supports the following
methods: multiple CD-ROMs and network FTP/HTTP connections.
devel/cpuflags
: Determine
the best compiler flags to optimise code for your current
CPU and compiler.
Utilities for keeping track of installed packages, being up to date, etc:
pkgtools/pkgin
: A package
update tool similar to apt(1). Download, install, and upgrade
binary packages easily.
pkgtools/pkg_chk
: Reports on
packages whose installed versions do not match the latest pkgsrc
entries.
pkgtools/pkgdep
: Makes
dependency graphs of packages, to aid in choosing a strategy for
updating.
pkgtools/pkgdepgraph
: Makes
graphs from the output of pkgtools/pkgdep
(uses graphviz).
pkgtools/pkglint
: The
pkglint(1) program checks a pkgsrc entry for errors.
pkgtools/lintpkgsrc
: The lintpkgsrc(1) program
does various checks on the complete pkgsrc system.
pkgtools/pkgsurvey
: Report what
packages you have installed.
Utilities for people maintaining or creating individual packages:
pkgtools/pkgdiff
: Automate
making and maintaining patches for a package (includes pkgdiff,
pkgvi, mkpatches, etc.).
pkgtools/url2pkg
: Aids in
converting to pkgsrc.
Utilities for people maintaining pkgsrc (or: more obscure pkg utilities)
pkgtools/pkg_comp
: Build
packages in a chrooted area.
pkgtools/libkver
: Spoof
kernel version for chrooted cross builds.
To install packages from source as a non-root user, download pkgsrc as described in Chapter 3, Where to get pkgsrc and how to keep it up-to-date, cd into that directory and run the command ./bootstrap/bootstrap --unprivileged.
This will install the binary part of pkgsrc to
~/pkg
and put the pkgsrc configuration mk.conf
into ~/pkg/etc
.
For more details, see mk/unprivileged.mk
.
By default, resuming transfers in pkgsrc is disabled, but you can
enable this feature by adding the option
PKG_RESUME_TRANSFERS=YES
into
mk.conf
. If, during a fetch step, an incomplete
distfile is found, pkgsrc will try to resume it.
You can also
use a different program than the platform default program by changing the
FETCH_USING
variable. You can specify the program by
using of ftp, fetch, wget or curl. Alternatively, fetching can be disabled
by using the value manual. A value of custom disables the system defaults
and dependency tracking for the fetch program. In that case you have to
provide FETCH_CMD
, FETCH_BEFORE_ARGS
,
FETCH_RESUME_ARGS
, FETCH_OUTPUT_ARGS
,
FETCH_AFTER_ARGS
.
For example, if you want to use
wget
to download, you'll have to use something
like:
FETCH_USING= wget
If you want to use modular X.org from pkgsrc instead of your system's own X11
(/usr/X11R6
, /usr/openwin
, ...)
you will have to add the following line into
mk.conf
:
X11_TYPE=modular
If you are sitting behind a firewall which does not allow direct connections to Internet hosts (i.e. non-NAT), you may specify the relevant proxy hosts. This is done using an environment variable in the form of a URL, e.g. in Amdahl, the machine “orpheus.amdahl.com” is one of the firewalls, and it uses port 80 as the proxy port number. So the proxy environment variables are:
ftp_proxy=ftp://orpheus.amdahl.com:80/ http_proxy=http://orpheus.amdahl.com:80/
Some fetch tools are not prepared to support HTTPS by default (for example, the one in NetBSD 6.0), or the one installed by the pkgsrc bootstrap (to avoid an openssl dependency that low in the dependency graph).
Usually you won't notice, because distribution files are
mirrored weekly to “ftp.NetBSD.org”, but that might not
be often enough if you are following pkgsrc-current. In that case, set
FETCH_USING
in your mk.conf
file to
“curl” or “wget”, which are both compiled
with HTTPS support by default. Of course, these tools need to be
installed before you can use them this way.
This depends on which utility is used to retrieve distfiles. From
bsd.pkg.mk
, FETCH_CMD
is assigned
the first available command from the following list:
${LOCALBASE}/bin/ftp
/usr/bin/ftp
On a default NetBSD installation, this will be
/usr/bin/ftp
, which automatically tries passive
connections first, and falls back to active connections if the server
refuses to do passive. For the other tools, add the following to your
mk.conf
file:
PASSIVE_FETCH=1
.
Having that option present will prevent
/usr/bin/ftp
from falling back to active
transfers.
You would like to download all the distfiles in a single batch from work or university, where you can't run a make fetch. There is an archive of distfiles on ftp.NetBSD.org, but downloading the entire directory may not be appropriate.
The answer here is to do a make fetch-list in
/usr/pkgsrc
or one of its subdirectories, carry the
resulting list to your machine at work/school and use it there. If you
don't have a NetBSD-compatible ftp(1) (like tnftp) at work, don't
forget to set FETCH_CMD
to something that fetches a
URL:
At home:
%
cd /usr/pkgsrc
%
make fetch-list FETCH_CMD=wget DISTDIR=/tmp/distfiles >/tmp/fetch.sh
%
scp /tmp/fetch.sh work:/tmp
At work:
%
sh /tmp/fetch.sh
then tar up /tmp/distfiles
and take it
home.
If you have a machine running NetBSD, and you want to get all distfiles (even ones that aren't for your machine architecture), you can do so by using the above-mentioned make fetch-list approach, or fetch the distfiles directly by running:
%
make mirror-distfiles
If you even decide to ignore
NO_{SRC,BIN}_ON_{FTP,CDROM}
, then you can get everything
by running:
%
make fetch NO_SKIP=yes
When compiling the pkgtools/pkg_install
package, you get the error from make that it doesn't know how to make
/usr/share/tmac/tmac.andoc
? This indicates that
you don't have installed the “text” set (nroff, ...) from
the NetBSD base distribution on your machine. It is recommended to do
that to format man pages.
In the case of the pkgtools/pkg_install
package, you
can get away with setting NOMAN=YES
either in the
environment or in mk.conf
.
You didn't install the compiler set, comp.tgz
,
when you installed your NetBSD machine. Please get and install it, by
extracting it in /
:
#
cd /
#
tar --unlink -zxvpf .../comp.tgz
comp.tgz
is part of every NetBSD release. Get
the one that corresponds to your release (determine via uname
-r).
When installing packages as non-root user and using the just-in-time
su(1) feature of pkgsrc, it can become annoying to type in the root
password for each required package installed. To avoid this, the sudo
package can be used, which does password caching over a limited time. To
use it, install sudo (either as binary package or from
security/sudo
) and then put the
following into your mk.conf
, somewhere
after the definition of the
LOCALBASE
variable:
.if exists(${LOCALBASE}/bin/sudo) SU_CMD= ${LOCALBASE}/bin/sudo /bin/sh -c .endif
As the system administrator, you can choose where configuration files
are installed. The default settings make all these files go into
${PREFIX}/etc
or some of its subdirectories; this may
be suboptimal depending on your expectations (e.g., a read-only,
NFS-exported PREFIX
with a need of per-machine
configuration of the provided packages).
In order to change the defaults, you can modify the
PKG_SYSCONFBASE
variable (in
mk.conf
) to point to your preferred configuration
directory; some common examples include /etc
or
/etc/pkg
.
Furthermore, you can change this value on a per-package basis by
setting the PKG_SYSCONFDIR.${PKG_SYSCONFVAR}
variable.
PKG_SYSCONFVAR
's value usually matches the name of the
package you would like to modify, that is, the contents of
PKGBASE
.
Note that after changing these settings, you must rebuild and reinstall any affected packages.
Please be aware that there can often be bugs in third-party software,
and some of these bugs can leave a machine vulnerable to exploitation by
attackers. In an effort to lessen the exposure, the NetBSD packages team
maintains a database of known-exploits to packages which have at one time
been included in pkgsrc. The database can be downloaded automatically, and
a security audit of all packages installed on a system can take place. To
do this, refer to the following two tools (installed as part of the
pkgtools/pkg_install
package):
pkg_admin fetch-pkg-vulnerabilities, an easy way to download a list of the security vulnerabilities information. This list is kept up to date by the pkgsrc security team, and is distributed from the NetBSD ftp server:
pkg_admin audit, an easy way to audit the current machine, checking each known vulnerability. If a vulnerable package is installed, it will be shown by output to stdout, including a description of the type of vulnerability, and a URL containing more information.
Use of these tools is strongly recommended! See Section 5.1.5, “Checking for security vulnerabilities in installed packages” for instructions on how to automate checking and reporting.
If this database is installed, pkgsrc builds will use it to perform a security check before building any package.
When you add your own preferences to the
CFLAGS
variable in your
mk.conf
, these flags are passed in
environment variables to the ./configure
scripts and to make(1). Some package authors ignore the
CFLAGS
from the environment variable by
overriding them in the Makefile
s of their
package.
Currently there is no solution to this problem. If you
really need the package to use your CFLAGS
you should run make patch in the package
directory and then inspect any Makefile
and
Makefile.in
for whether they define
CFLAGS
explicitly. Usually you can remove
these lines. But be aware that some “smart”
programmers write so bad code that it only works for the
specific combination of CFLAGS
they have
chosen.
Make sure that your copy of pkgsrc is consistent. A case that occurs often is that people only update pkgsrc in parts, because of performance reasons. Since pkgsrc is one large system, not a collection of many small systems, there are sometimes changes that only work when the whole pkgsrc tree is updated.
Make sure that you don't have any CVS conflicts. Search for “<<<<<<” or “>>>>>>” in all your pkgsrc files.
Make sure that you don't have old copies of the packages extracted. Run make clean clean-depends to verify this.
If you are a package developer who wants to invest some work, have a look at Chapter 21, Making your package work.
If the problem still exists, write a mail to the
pkgsrc-users
mailing list.
You have modified a file from pkgsrc, and someone else has
modified that same file afterwards in the CVS repository. Both changes
are in the same region of the file, so when you updated pkgsrc, the
cvs
command marked the conflicting changes in the
file. Because of these markers, the file is no longer a valid
Makefile
.
Have a look at that file, and if you don't need your local changes anymore, you can remove that file and run cvs -q update -dP in that directory to download the current version.
This part of the book deals with creating and modifying packages. It starts with a “HOWTO”-like guide on creating a new package. The remaining chapters are more like a reference manual for pkgsrc.
Table of Contents
Makefile
sPLIST
generationPLIST_SRC
mk.conf
To get help when developing pkgsrc, the definitive source is this document, the pkgsrc guide. If you don't find anything here, there are alternatives:
The built-in pkgsrc help, which is available after bootstrapping
pkgsrc. Run bmake help topic=… to get
help for any topic, such as a variable name like
BUILD_DEFS
, a make target like
do-build, a missing C or C++ function like
strcasecmp or any other topic.
The available help topics are listed in Appendix D, Help topics.
To see the value of a single variable, run bmake
show-var VARNAME=X
.
To see the values of the most common variables, run
bmake show-all. These variables are grouped by
topic. To see the variables for a single topic, run
bmake
show-all-topic
, for example
bmake show-all-fetch.
The tech-pkg mailing list, to which you can subscribe and then ask your questions.
The #pkgsrc IRC channel, which is accessible via a web browser or by using a specialized chat program such as XChat. Pick any user name and join the channel #pkgsrc.
Table of Contents
When you find a package that is not yet in pkgsrc, you most likely have a URL from where you can download the source code. Starting with this URL, creating a package involves only a few steps.
First, install the packages pkgtools/url2pkg
and pkgtools/pkglint
.
Then, choose one of the top-level directories as the
category in which you want to place your package. You can also create a
directory of your own (maybe called local
). In that
category directory, create another directory for your package and change
into it.
Run the program url2pkg, which will ask
you for a URL. Enter the URL of the distribution file (in most cases a
.tar.gz
file) and watch how the basic ingredients
of your package are created automatically. The distribution file is
extracted automatically to fill in some details in the
Makefile
that would otherwise have to be done
manually.
Examine the extracted files to determine the dependencies of
your package. Ideally, this is mentioned in some
README
file, but things may differ. For each of
these dependencies, look where it exists in pkgsrc, and if there is a
file called buildlink3.mk
in that directory, add a
line to your package Makefile
which includes that
file just before the last line. If the
buildlink3.mk
file does not exist, it must be
created first. The buildlink3.mk
file makes sure
that the package's include files and libraries are provided.
If you just need binaries from a package, add a
DEPENDS
line to the Makefile, which specifies the
version of the dependency and where it can be found in pkgsrc. This line
should be placed in the third paragraph. If the dependency is only
needed for building the package, but not when using it, use
TOOL_DEPENDS
or BUILD_DEPENDS
instead of DEPENDS
.
The difference between TOOL_DEPENDS
and
BUILD_DEPENDS
occurs when cross-compiling:
TOOL_DEPENDS
are native
packages, i.e. packages for the architecture where the package
is built;
BUILD_DEPENDS
are target
packages, i.e. packages for the architecture for which the package
is built.
Your package may then look like this:
[...] TOOL_DEPENDS+= libxslt-[0-9]*:../../textproc/libxslt DEPENDS+= screen-[0-9]*:../../misc/screen DEPENDS+= screen>=4.0:../../misc/screen [...] .include "../../category
/package
/buildlink3.mk" .include "../../devel/glib2/buildlink3.mk" .include "../../mk/bsd.pkg.mk"
Run pkglint to see what things still need to be done to make your package a “good” one. If you don't know what pkglint's warnings want to tell you, try pkglint --explain or pkglint -e, which outputs additional explanations.
In many cases the package is not yet ready to build. You can find instructions for the most common cases in the next section, Section 12.1, “Common types of packages”. After you have followed the instructions over there, you can hopefully continue here.
Run bmake clean to clean the working
directory from the extracted files. Besides these files, a lot of cache
files and other system information has been saved in the working
directory, which may become wrong after you edited the
Makefile
.
Now, run bmake to build the package. For the various things that can go wrong in this phase, consult Chapter 21, Making your package work.
When the package builds fine, the next step is to install the package. Run bmake install and hope that everything works.
Up to now, the file PLIST
, which
contains a list of the files that are installed by the package, is
nearly empty. Run bmake print-PLIST
>PLIST to generate a probably correct list. Check
the file using your preferred text editor to see if the list of
files looks plausible.
Run pkglint again to see if the generated
PLIST
contains garbage or not.
When you ran bmake install, the package
has been registered in the database of installed files, but with an
empty list of files. To fix this, run bmake deinstall
and bmake install again. Now the package is
registered with the list of files from
PLIST
.
Run bmake package to create a binary package from the set of installed files.
Simple Perl modules are handled automatically by url2pkg, including dependencies.
Python modules and programs packages are easily created using a set of predefined variables.
If some Python versions are not supported by the software, set the
PYTHON_VERSIONS_INCOMPATIBLE
variable to the Python versions
that are not supported, e.g.
PYTHON_VERSIONS_INCOMPATIBLE= 27
If the packaged software is a Python module, include one of
../../lang/python/egg.mk
,
../../lang/python/distutils.mk
, or
../../lang/python/extension.mk
.
Most Python packages use either “distutils” or
easy-setup/setuptools (“eggs”).
if the packaged software is using setuptools, you only need
to include “../../lang/python/egg.mk
”.
Otherwise, if the software uses “distutils”, include
“../../lang/python/distutils.mk
”.
so pkgsrc will use this framework.
“distutils” uses a script called setup.py
,
if the “distutils” driver is not called
setup.py
, set the PYSETUP
variable
to the name of the script.
Either way, the package directory should be called
“py-software” and PKGNAME
should be set to
“${PYPKGPREFIX}-${DISTNAME}”, e.g.
DISTNAME= foopymodule-1.2.10 PKGNAME= ${PYPKGPREFIX}-${DISTNAME}
If it is an application, include
“../../lang/python/application.mk
”.
In order to correctly set the path to the Python interpreter, use the
REPLACE_PYTHON
variable and set it to the list of files
(paths relative to WRKSRC
) that must be corrected.
For example:
REPLACE_PYTHON= *.py
Some Python modules have separate distributions for Python-2.x
and Python-3.x support. In pkgsrc this is handled by the
versioned_dependencies.mk
file. Set
PYTHON_VERSIONED_DEPENDENCIES
to the list of
packages that should be depended upon and include
“../../lang/python/versioned_dependencies.mk
”,
then the pkgsrc infrastructure will depend on the appropriate package
version. For example:
PYTHON_VERSIONED_DEPENDENCIES=dialog
Look inside versioned_dependencies.mk
for a list
of supported packages.
Simple R packages from CRAN
are handled automatically by R2pkg, which is
available in pkgtools/R2pkg
.
Individual packages (and optionally their dependencies) may be created
and updated. R packages generally follow the same form, and most of
the relevant information needed is contained in a
DESCRIPTION
file as part of each R package on
CRAN.
Consequently, R2pkg downloads that information and
creates or updates a package in the canonical form. The resulting
package should be reviewed for correctness.
TeXlive packages from CTAN are handled automatically by
texlive2pkg, which is available in pkgtools/texlive2pkg
.
If the TeXlive package name is not known, it may be useful to search CTAN. A “Contained in” field on the package page typically identifies the basename of the package file in the TeXlive archive.
If the TeXlive package name is known, download the files from
the TeXlive
archive. For package foo
, you will need
to download foo.tar.xz
. Most TeXlive packages
also have associated documentation packages, so download
foo.doc.tar.xz
at the same time. These files
should be placed in the appropriate category directory, which is often
but not always print
. Then run the following
command in the category directory.
texlive2pkg foo.tar.xz foo.doc.tar.xz
This will create two packages, tex-foo
and
tex-foo-doc
. Be sure to check that both packages
are correct.
Finally, CTAN currently does not include version information in package filenames and changes their contents periodically when updates occur. Consequently, pkgsrc avoids downloading distfiles directly from CTAN and instead relies on the pkgsrc archives. For each new or updated TeXlive package, e.g., the main one and the corresponding documentation, upload the distfiles with the following command in each package directory.
make upload-distfiles
Looking at the file pkgsrc/doc/TODO
, I saw
that the “nvu” package has not yet been imported into
pkgsrc. As the description says it has to do with the web, the obvious
choice for the category is “www”.
$
mkdir www/nvu$
cd www/nvu
The web site says that the sources are available as a tar file, so I fed that URL to the url2pkg program:
$
url2pkg http://cvs.nvu.com/download/nvu-1.0-sources.tar.bz2
My editor popped up, and I added a PKGNAME
line
below the DISTNAME
line, as the package name should
not have the word “sources” in it. I also filled in the
MAINTAINER
, HOMEPAGE
and
COMMENT
fields. Then the package
Makefile
looked like that:
# $NetBSD $ # DISTNAME= nvu-1.0-sources PKGNAME= nvu-1.0 CATEGORIES= www MASTER_SITES= http://cvs.nvu.com/download/ EXTRACT_SUFX= .tar.bz2 MAINTAINER= rillig@NetBSD.org HOMEPAGE= http://cvs.nvu.com/ COMMENT= Web Authoring System # url2pkg-marker (please do not remove this line.) .include "../../mk/bsd.pkg.mk"
On the first line of output above, an artificial space has been added between NetBSD and $, this is a workaround to prevent CVS expanding to the filename of the guide.
Then, I quit the editor and watched pkgsrc downloading a large source archive:
url2pkg> Running "make makesum" ... => Required installed package digest>=20010302: digest-20060826 found => Fetching nvu-1.0-sources.tar.bz2 Requesting http://cvs.nvu.com/download/nvu-1.0-sources.tar.bz2 100% |*************************************| 28992 KB 150.77 KB/s00:00 ETA 29687976 bytes retrieved in 03:12 (150.77 KB/s) url2pkg> Running "make extract" ... => Required installed package digest>=20010302: digest-20060826 found => Checksum SHA1 OK for nvu-1.0-sources.tar.bz2 => Checksum RMD160 OK for nvu-1.0-sources.tar.bz2 work.bacc -> /tmp/roland/pkgsrc/www/nvu/work.bacc ===> Installing dependencies for nvu-1.0 ===> Overriding tools for nvu-1.0 ===> Extracting for nvu-1.0 url2pkg> Adjusting the Makefile. Remember to correct CATEGORIES, HOMEPAGE, COMMENT, and DESCR when you're done! Good luck! (See pkgsrc/doc/pkgsrc.txt for some more help :-)
Now that the package has been extracted, let's see what's inside
it. The package has a README.txt
, but that only
says something about mozilla, so it's probably useless for seeing what
dependencies this package has. But since there is a GNU configure script
in the package, let's hope that it will complain about everything it
needs.
$
bmake
=> Required installed package digest>=20010302: digest-20060826 found
=> Checksum SHA1 OK for nvu-1.0-sources.tar.bz2
=> Checksum RMD160 OK for nvu-1.0-sources.tar.bz2
===> Patching for nvu-1.0
===> Creating toolchain wrappers for nvu-1.0
===> Configuring for nvu-1.0
[...]
configure: error: Perl 5.004 or higher is required.
[...]
WARNING: Please add USE_TOOLS+=perl to the package Makefile.
[...]
That worked quite well. So I opened the package Makefile in my
editor, and since it already has a USE_TOOLS
line, I
just appended “perl” to it. Since the dependencies of the
package have changed now, and since a perl wrapper is automatically
installed in the “tools” phase, I need to build the package
from scratch.
$
bmake clean ===> Cleaning for nvu-1.0$
bmake [...] *** /tmp/roland/pkgsrc/www/nvu/work.bacc/.tools/bin/make is not \ GNU Make. You will not be able to build Mozilla without GNU Make. [...]
So I added “gmake” to the
USE_TOOLS
line and tried again (from scratch).
[...] checking for GTK - version >= 1.2.0... no *** Could not run GTK test program, checking why... [...]
Now to the other dependencies. The first question is: Where is the GTK package hidden in pkgsrc?
$
echo ../../*/gtk* [many packages ...]$
echo ../../*/gtk ../../x11/gtk$
echo ../../*/gtk2 ../../x11/gtk2$
echo ../../*/gtk2/bui* ../../x11/gtk2/buildlink3.mk
The first try was definitely too broad. The second one had exactly one result, which is very good. But there is one pitfall with GNOME packages. Before GNOME 2 had been released, there were already many GNOME 1 packages in pkgsrc. To be able to continue to use these packages, the GNOME 2 packages were imported as separate packages, and their names usually have a “2” appended. So I checked whether this was the case here, and indeed it was.
Since the GTK2 package has a buildlink3.mk
file, adding the dependency is very easy. I just inserted an
.include
line before the last line of the package
Makefile
, so that it now looks like this:
[...] .include "../../x11/gtk2/buildlink3.mk" .include "../../mk/bsd.pkg.mk
After another bmake clean && bmake, the answer was:
[...] checking for gtk-config... /home/roland/pkg/bin/gtk-config checking for GTK - version >= 1.2.0... no *** Could not run GTK test program, checking why... *** The test program failed to compile or link. See the file config.log for the *** exact error that occured. This usually means GTK was incorrectly installed *** or that you have moved GTK since it was installed. In the latter case, you *** may want to edit the gtk-config script: /home/roland/pkg/bin/gtk-config configure: error: Test for GTK failed. [...]
In this particular case, the assumption that “every package
prefers GNOME 2” had been wrong. The first of the lines above
told me that this package really wanted to have the GNOME 1 version of
GTK. If the package had looked for GTK2, it would have looked for
pkg-config instead of gtk-config.
So I changed the x11/gtk2
to
x11/gtk
in the package Makefile
,
and tried again.
[...] cc -o xpidl.o -c -DOSTYPE=\"NetBSD3\" -DOSARCH=\"NetBSD\" [...] In file included from xpidl.c:42: xpidl.h:53:24: libIDL/IDL.h: No such file or directory In file included from xpidl.c:42: xpidl.h:132: error: parse error before "IDL_ns" [...]
The package still does not find all of its dependencies. Now the
question is: Which package provides the
libIDL/IDL.h
header file?
$
echo ../../*/*idl* ../../devel/py-idle ../../wip/idled ../../x11/acidlaunch$
echo ../../*/*IDL* ../../net/libIDL
Let's take the one from the second try. So I included the
../../net/libIDL/buildlink3.mk
file and tried
again. But the error didn't change. After digging through some of the
code, I concluded that the build process of the package was broken and
couldn't have ever worked, but since the Mozilla source tree is quite
large, I didn't want to fix it. So I added the following to the package
Makefile
and tried again:
CPPFLAGS+= -I${BUILDLINK_PREFIX.libIDL}/include/libIDL-2.0 BUILDLINK_TRANSFORM+= l:IDL:IDL-2
The latter line is needed because the package expects the library
libIDL.so
, but only
libIDL-2.so
is available. So I told the compiler
wrapper to rewrite that on the fly.
The next problem was related to a recent change of the FreeType
interface. I looked up in www/seamonkey
which patch files were relevant for this issue and copied them to the
patches
directory. Then I retried, fixed the
patches so that they applied cleanly and retried again. This time,
everything worked.
Table of Contents
Whenever you're preparing a package, there are a number of files involved which are described in the following sections.
Building, installation and creation of a binary package are all
controlled by the package's Makefile
.
The Makefile
describes various things about
a package, for example from where to get it, how to configure,
build, and install it.
A package Makefile
contains several
sections that describe the package.
In the first section there are the following variables, which should appear exactly in the order given here. The order and grouping of the variables is mostly historical and has no further meaning.
DISTNAME
is the basename of the
distribution file to be downloaded from the package's
website.
PKGNAME
is the name of the
package, as used by pkgsrc. You need to provide it if
DISTNAME
(which is the default) is not a good
name for the package in pkgsrc or DISTNAME
is not
provided (no distribution file is required). Usually it is the pkgsrc
directory name together with the version number. It must match the
regular expression
^[A-Za-z0-9][A-Za-z0-9-_.+]*$
, that is, it
starts with a letter or digit, and contains only letters, digits,
dashes, underscores, dots and plus signs.
CATEGORIES
is a list of categories
which the package fits in. You can choose any of the top-level
directories of pkgsrc for it.
Currently the following values are available for
CATEGORIES
. If more than
one is used, they need to be separated by spaces:
archivers cross geography meta-pkgs security audio databases graphics misc shells benchmarks devel ham multimedia sysutils biology editors inputmethod net textproc cad emulators lang news time chat finance mail parallel wm comms fonts math pkgtools www converters games mbone print x11
MASTER_SITES
,
DYNAMIC_MASTER_SITES
,
DIST_SUBDIR
, EXTRACT_SUFX
and DISTFILES
are discussed in detail in
Section 19.5, “The fetch phase”.
The second section contains information about separately downloaded patches, if any.
PATCHFILES
:
Name(s) of additional files that contain distribution patches.
There is no default. pkgsrc will look for them at
PATCH_SITES
.
They will automatically be uncompressed before patching if
the names end with .gz
or
.Z
.
PATCH_SITES
:
Primary location(s) for distribution patch files (see
PATCHFILES
above) if not found locally.
PATCH_DIST_STRIP
:
an argument to patch(1) that sets the pathname strip count to
help find the correct files to patch. It defaults to
-p0.
The third section contains the following variables.
MAINTAINER
is the email
address of the person who feels responsible for this package,
and who is most likely to look at problems or questions regarding
this package which have been reported with send-pr(1).
Other developers may contact the MAINTAINER
before making changes to the package, but are not required to
do so. When packaging a new program, set MAINTAINER
to yourself. If you really can't maintain the package for future
updates, set it to
<pkgsrc-users@NetBSD.org>
.
OWNER
should be used instead
of MAINTAINER
when you do not want other
developers to update or change the package without contacting
you first. A package Makefile should contain one of
MAINTAINER
or OWNER
, but
not both.
HOMEPAGE
is a URL where users can
find more information about the package.
COMMENT
is a one-line
description of the package (should not include the package
name).
LICENSE
indicates the license(s)
applicable for the package. See Section 21.1.3, “Handling licenses” for further details.
Other variables that affect the build:
WRKSRC
: The directory where the
interesting distribution files of the package are found. The
default is ${WRKDIR}/${DISTNAME}
, which
works for most packages.
If a package doesn't create a subdirectory for itself
(most GNU software does, for instance), but extracts itself in
the current directory, you should set
WRKSRC=${WRKDIR}
.
If a package doesn't create a subdirectory with the
name of DISTNAME
but some different name,
set WRKSRC
to point to the proper name in
${WRKDIR}
, for example
WRKSRC=${WRKDIR}/${DISTNAME}/unix
. See
lang/tcl
and x11/tk
for other examples.
The name of the working directory created by pkgsrc is
taken from the WRKDIR_BASENAME
variable. By default, its value is
work
. If you want to use the same
pkgsrc tree for building different kinds of binary packages,
you can change the variable according to your needs. Two
other variables handle common cases of setting
WRKDIR_BASENAME
individually. If
OBJHOSTNAME
is defined in
mk.conf
, the first component of
the host's name is attached to the directory name. If
OBJMACHINE
is defined, the platform name
is attached, which might look like
work.i386
or
work.sparc
.
Please pay attention to the following gotchas:
Add MANCOMPRESSED
if man pages are
installed in compressed form by the package. For packages using
BSD-style makefiles which honor MANZ, there is
MANCOMPRESSED_IF_MANZ
.
Replace /usr/local
with
“${PREFIX}” in all files (see patches,
below).
If the package installs any info files, see Section 21.6.7, “Packages installing info files”.
The distinfo
file contains the message
digest, or checksum, of each distfile needed for the package. This
ensures that the distfiles retrieved from the Internet have not been
corrupted during transfer or altered by a malign force to introduce
a security hole. To provide maximum security, all distfiles are
protected using three different message digest algorithms (SHA1,
RMD160, SHA512), as well as the file size.
The distinfo
file also contains the
checksums for all the patches found in the
patches
directory (see Section 13.3, “patches/*
”). These checksums ensure that patches
are only applied intentionally and that they don't accidentally change,
e.g. when merging different changes together. They also make sure that
new patches are actually added to CVS and old ones are removed.
Too see whether the patches and the distinfo
file
match, run pkglint after changing the patches.
To regenerate the distinfo
file, use the
make distinfo command.
Some packages have different sets of distfiles depending on
the platform, for example lang/openjdk7
. These are kept in the same
distinfo
file and care should be taken when
upgrading such a package to ensure distfile information is not
lost.
Some packages don't work out-of-the box on the various
platforms that are supported by pkgsrc. These packages need
to be patched to make them work. The patch files can be
found in the patches/
directory.
In the patch phase, these patches are
applied to the files in WRKSRC
directory after
extracting them, in alphabetic order.
The patch-*
files should be in
diff -bu format, and apply without a fuzz to avoid
problems. (To force patches to apply with fuzz you can set
PATCH_FUZZ_FACTOR=-F2
). Furthermore, each patch
should contain only changes for a single file, and no file should be
patched by more than one patch file. This helps to keep future
modifications simple.
Each patch file is structured as follows: In the first line, there is the RCS Id of the patch itself. The second line should be empty for aesthetic reasons. After that, there should be a comment for each change that the patch does. There are a number of standard cases:
Patches for commonly known vulnerabilities should mention the vulnerability ID (CAN, CVE).
Patches that change source code should mention the platform and other environment (for example, the compiler) that the patch is needed for.
The patch should be commented so that any developer who knows the code of the application can make some use of the patch. Special care should be taken for the upstream developers, since we generally want that they accept our patches, so we have less work in the future.
One important thing to mention is to pay attention that no RCS
IDs get stored in the patch files, as these will cause problems when
later checked into the NetBSD CVS tree. Use the
pkgdiff command from the pkgtools/pkgdiff
package to avoid these
problems.
For even more automation, we recommend using
mkpatches from the same package to make a
whole set of patches. You just have to backup files before you
edit them to filename.orig
, e.g. with
cp -p filename filename.orig or, easier, by
using pkgvi again from the same package. If
you upgrade a package this way, you can easily compare the new
set of patches with the previously existing one with
patchdiff. The files in patches
are replaced by new files, so carefully check if you want to take all
the changes.
When you have finished a package, remember to generate
the checksums for the patch files by using the make
makepatchsum command, see Section 13.2, “distinfo
”.
When adding a patch that corrects a problem in the distfile (rather than e.g. enforcing pkgsrc's view of where man pages should go), send the patch as a bug report to the maintainer. This benefits non-pkgsrc users of the package, and usually makes it possible to remove the patch in future version.
The file names of the patch files are usually of the form
patch-
.
Many packages still use the previous convention
path_to_file__with__underscores.c
patch-
,
but new patches should be of the form containing the filename.
mkpatches included in [a-z][a-z]
pkgtools/pkgdiff
takes care of the name
automatically.
If you want to share patches between multiple packages
in pkgsrc, e.g. because they use the same distfiles, set
PATCHDIR
to the path where the patch files
can be found, e.g.:
PATCHDIR= ../../editors/xemacs/patches
Patch files that are distributed by the author or other
maintainers can be listed in
PATCHFILES
.
If it is desired to store any patches that should not be
committed into pkgsrc, they can be kept outside the pkgsrc
tree in the $LOCALPATCHES
directory. The
directory tree there is expected to have the same
“category/package” structure as pkgsrc, and
patches are expected to be stored inside these dirs (also
known as $LOCALPATCHES/$PKGPATH
). For
example, if you want to keep a private patch for
pkgsrc/graphics/png
, keep it in
$LOCALPATCHES/graphics/png/mypatch
. All
files in the named directory are expected to be patch files,
and they are applied after pkgsrc patches are
applied.
When fixing a portability issue in the code do not use preprocessor magic to check for the current operating system nor platform. Doing so hurts portability to other platforms because the OS-specific details are not abstracted appropriately.
The general rule to follow is: instead of checking for the
operating system the application is being built on, check for the
specific features you need. For example,
instead of assuming that kqueue is available under NetBSD and
using the __NetBSD__
macro to conditionalize
kqueue support, add a check that detects kqueue itself —
yes, this generally involves patching the
configure script. There is absolutely nothing
that prevents some OSes from adopting interfaces from other OSes
(e.g. Linux implementing kqueue), something that the above checks
cannot take into account.
Of course, checking for features generally involves more work on the developer's side, but the resulting changes are cleaner and there are chances they will work on many other platforms. Not to mention that there are higher chances of being later integrated into the mainstream sources. Remember: It doesn't work unless it is right!
Some typical examples:
Table 13.1. Patching examples
Where | Incorrect | Correct |
---|---|---|
configure script |
case ${target_os} in netbsd*) have_kvm=yes ;; *) have_kvm=no ;; esac |
AC_CHECK_LIB(kvm, kvm_open, have_kvm=yes, have_kvm=no) |
C source file |
#if defined(__NetBSD__) # include <sys/event.h> #endif |
#if defined(HAVE_SYS_EVENT_H) # include <sys/event.h> #endif |
C source file |
int monitor_file(...) { #if defined(__NetBSD__) int fd = kqueue(); ... #else ... #endif } |
int monitor_file(...) { #if defined(HAVE_KQUEUE) int fd = kqueue(); ... #else ... #endif } |
Always, always, always feed back any portability fixes or improvements you do to a package to the mainstream developers. This is the only way to get their attention on portability issues and to ensure that future versions can be built out-of-the box on NetBSD. Furthermore, any user that gets newer distfiles will get the fixes straight from the packaged code.
This generally involves cleaning up the patches (because sometimes the patches that are added to pkgsrc are quick hacks), filing bug reports in the appropriate trackers for the projects and working with the mainstream authors to accept your changes. It is extremely important that you do it so that the packages in pkgsrc are kept simple and thus further changes can be done without much hassle.
When you have done this, please add a URL to the upstream bug report to the patch comment.
Support the idea of free software!
DESCR
A multi-line description of the piece of software. This should include any credits where they are due. Please bear in mind that others do not share your sense of humour (or spelling idiosyncrasies), and that others will read everything that you write here.
PLIST
This file governs the files that are installed on your system: all the binaries, manual pages, etc. There are other directives which may be entered in this file, to control the creation and deletion of directories, and the location of inserted files. See Chapter 15, PLIST issues for more information.
INSTALL
This shell script is invoked twice by pkg_add(1).
First time after package extraction and before files are
moved in place, the second time after the files to install
are moved in place. This can be used to do any custom
procedures not possible with @exec commands in
PLIST
. See pkg_add(1) and
pkg_create(1) for more information. See also Section 17.1, “Files and directories outside the installation prefix”.
Please note that you can modify variables in it easily by using
FILES_SUBST
in the package's
Makefile
:
FILES_SUBST+= SOMEVAR="somevalue"
replaces "@SOMEVAR@" with “somevalue” in the
INSTALL
. By default, substitution is
performed for PREFIX
,
LOCALBASE
, X11BASE
,
VARBASE
, and a few others, type
make help topic=FILES_SUBST for a
complete list.
DEINSTALL
This script is executed before and after any files are removed. It is
this script's responsibility to clean up any additional messy details
around the package's installation, since all pkg_delete knows is how to
delete the files created in the original distribution.
See pkg_delete(1)
and pkg_create(1) for more information.
The same methods to replace variables can be used as for
the INSTALL
file.
MESSAGE
This file is displayed after installation of the package.
Useful for things like legal notices on almost-free
software and hints for updating config files after
installing modules for apache, PHP etc.
Please note that you can modify variables in it easily by using
MESSAGE_SUBST
in the package's
Makefile
:
MESSAGE_SUBST+= SOMEVAR="somevalue"
replaces "${SOMEVAR}" with “somevalue” in
MESSAGE
. By default, substitution is
performed for PKGNAME
,
PKGBASE
, PREFIX
,
LOCALBASE
, X11BASE
,
PKG_SYSCONFDIR
,
ROOT_GROUP
, and
ROOT_USER
.
You can display a different or additional files by
setting the MESSAGE_SRC
variable. Its
default is MESSAGE
, if the file
exists.
ALTERNATIVES
This file is used by the alternatives framework. It creates, configures, and destroys generic wrappers used to run programs with similar interfaces. See pkg_alternatives(8) from pkgtools/pkg_alternatives for more information.
Each line of the file contains two filenames, first
the wrapper and then the alternative provided by the package.
Both paths are relative to PREFIX
.
Makefile.common
This file contains arbitrary things that could
also go into a Makefile
, but its purpose is
to be used by more than one package. This file should only be
used when the packages that will use the file are known in
advance. For other purposes it is often better to write a
*.mk
file and give it a good name that
describes what it does.
buildlink3.mk
This file contains the dependency information for the buildlink3 framework (see Chapter 16, Buildlink methodology).
hacks.mk
This file contains workarounds for compiler bugs
and similar things. It is included automatically by the pkgsrc
infrastructure, so you don't need an extra
.include
line for
it.
options.mk
This file contains the code for the
package-specific options (see Chapter 18, Options handling) that can be
selected by the user. If a package has only one or two options,
it is equally acceptable to put the code directly into the
Makefile
.
When you type make, the distribution files are
unpacked into the directory denoted by
WRKDIR
. It can be removed by running
make clean. Besides the sources, this
directory is also used to keep various timestamp files.
The directory gets removed completely on clean.
The default is ${.CURDIR}/work
or ${.CURDIR}/work.${MACHINE_ARCH}
if OBJMACHINE
is set.
If you have any files that you wish to be placed in the package prior
to configuration or building, you could place these files here and use
a ${CP} command in the
“pre-configure” target to achieve
this. Alternatively, you could simply diff the file against
/dev/null
and use the patch mechanism to manage
the creation of this file.
If you want to share files in this way with other
packages, set the FILESDIR
variable to point
to the other package's files
directory,
e.g.:
FILESDIR= ../../editors/xemacs/files
Table of Contents
Pkgsrc consists of many Makefile
fragments,
each of which forms a well-defined part of the pkgsrc system. Using
the make(1) system as a programming language for a big system
like pkgsrc requires some discipline to keep the code correct and
understandable.
The basic ingredients for Makefile
programming are variables and shell
commands. Among these shell commands may even be more complex ones
like awk(1) programs. To make sure that every shell command runs
as intended it is necessary to quote all variables correctly when they
are used.
This chapter describes some patterns that appear quite often in
Makefile
s, including the pitfalls that come along
with them.
When you are creating a file as a target of a rule, always write the data to a temporary file first and finally rename that file. Otherwise there might occur an error in the middle of generating the file, and when the user runs make(1) for the second time, the file exists and will not be regenerated properly. Example:
wrong: @echo "line 1" > ${.TARGET} @echo "line 2" >> ${.TARGET} @false correct: @echo "line 1" > ${.TARGET}.tmp @echo "line 2" >> ${.TARGET}.tmp @false @mv ${.TARGET}.tmp ${.TARGET}
When you run make wrong twice, the file
wrong
will exist, although there was an error
message in the first run. On the other hand, running make
correct gives an error message twice, as expected.
You might remember that make(1) sometimes removes
${.TARGET}
in case of error, but this only
happens when it is interrupted, for example by pressing
Ctrl+C
. This does not happen
when one of the commands fails (like false(1) above).
Makefile
variables contain strings that
can be processed using the five operators =
,
+=
, ?=
, :=
and
!=
, which are described in the make(1) man
page.
When a variable's value is parsed from a
Makefile
, the hash character #
and
the backslash character \
are handled specially. If a
backslash is the last character in a line, that backslash is removed
from the line and the line continues with the next line of the file.
The #
character starts a comment that reaches
until the end of the line. To get an actual #
character,
such as in a URL, write \#
instead.
The evaluation of variables either happens immediately or lazy.
It happens immediately when the variable occurs on the right-hand
side of the :=
or the !=
operator, in a
.if
condition or a .for
loop.
In the other cases, it is evaluated lazily.
Some of the modifiers split the string into words and then operate on the words, others operate on the string as a whole. When a string is split into words, double quotes and single quotes are interpreted as delimiters, just like in sh(1).
All variable names starting with an underscore are reserved for use by the pkgsrc infrastructure. They shall not be used by packages.
In .for loops you should use lowercase variable names for the iteration variables.
All list variables should have a plural name,
such as PKG_OPTIONS
or
DISTFILES
.
When adding a string that possibly contains whitespace or quotes to
a list (example 1), it must be quoted using the :Q
modifier.
When adding another list to a list (example 2), it must not be quoted, since its elements are already quoted.
STRING= foo * bar `date` LIST= # empty ANOTHER_LIST= a=b c=d LIST+= ${STRING:Q} # 1 LIST+= ${ANOTHER_LIST} # 2
Echoing a string containing special characters needs special work.
STRING= foo bar < > * `date` $$HOME ' " EXAMPLE_ENV= string=${STRING:Q} x=multiple\ quoted\ words all: echo ${STRING} # 1 echo ${STRING:Q} # 2 printf '%s\n' ${STRING:Q}'' # 3 env ${EXAMPLE_ENV} sh -c 'echo "$$string"; echo "$$x"' # 4
Example 1 leads to a syntax error in the shell, as the characters are just copied.
Example 2 quotes the string so that the shell interprets it correctly. But the echo command may additionally interpret strings with a leading dash or those containing backslashes.
Example 3 can handle arbitrary strings, since printf(1) only interprets the format string, but not the next argument. The trailing single quotes handle the case when the string is empty. In that case, the :Q modifier would result in an empty string too, which would then be skipped by the shell. For printf(1) this doesn't make a difference, but other programs may care.
In example 4, the EXAMPLE_ENV
does not
need to be quoted because the quoting has already been done
when adding elements to the list.
When passing CFLAGS
or similar variables to a
GNU-style configure script (especially those that call other configure
scripts), it must not have leading or trailing whitespace, since
otherwise the configure script gets confused. To trim leading and
trailing whitespace, use the :M
modifier, as in the
following example:
CPPFLAGS= # empty CPPFLAGS+= -Wundef -DPREFIX=\"${PREFIX}\" CPPFLAGS+= ${MY_CPPFLAGS} CONFIGURE_ARGS+= CPPFLAGS=${CPPFLAGS:M*:Q} all: echo x${CPPFLAGS:Q}x # leading and trailing whitespace echo x${CONFIGURE_ARGS:Q}x # properly trimmed
In this example, CPPFLAGS
has both leading and
trailing whitespace because the +=
operator always adds a
space.
When a possibly empty variable is used in a shell program, it may lead to a syntax error.
EGFILES= # empty install-examples: # produces a syntax error in the shell for egfile in ${EGFILES}; do \ echo "Installing $$egfile"; \ done
The shell only sees the text for egfile in ; do
, since
${EGFILES}
is replaced with an empty string by make(1).
To fix this syntax error, use one of the snippets below.
EMPTY= # empty install-examples: for egfile in ${EGFILES} ""; do \ [ -n "$$egfile" ] || continue; \ echo "Installing $$egfile"; \ done
In this case, an empty string is appended to the iteration list (to prevent the syntax error) and filtered out later.
EGFILES= # empty install-examples: .for egfile in ${EGFILES} echo "Installing ${egfile}" .endfor
If one of the filenames contains special characters, it should be enclosed in single or double quotes.
To have a shell command test whether a make variable is empty, use
the following code: ${TEST} -z ${POSSIBLY_EMPTY:Q}""
.
Table of Contents
PLIST
generationPLIST_SRC
The PLIST
file contains a package's
“packing list”, i.e. a list of files that belong to
the package (relative to the ${PREFIX}
directory it's been installed in) plus some additional statements
- see the pkg_create(1) man page for a full list.
This chapter addresses some issues that need attention when
dealing with the PLIST
file (or files, see
below!).
Be sure to add a RCS ID line as the first thing in any
PLIST
file you write:
@comment $NetBSD $
An artificial space has been added between NetBSD and $, this is a workaround here to prevent CVS expanding to the filename of the guide. When adding the RCS ID the space should be omitted.
You can use the make print-PLIST command to output a PLIST that matches any new files since the package was extracted. See Section 19.17, “Other helpful targets” for more information on this target.
The PRINT_PLIST_AWK
variable takes a set
of AWK patterns and actions that are used to filter the output of
print-PLIST. You can append any chunk of AWK
scripting you like to it, but be careful with quoting.
For example, to get all files inside the
libdata/foo
directory removed from the
resulting PLIST:
PRINT_PLIST_AWK+= /^libdata\/foo/ { next; }
A number of variables are substituted automatically in PLISTs when a package is installed on a system. This includes the following variables:
${MACHINE_ARCH}
, ${MACHINE_GNU_ARCH}
Some packages like emacs and perl embed information
about which architecture they were built on into the
pathnames where they install their files. To handle this
case, PLIST will be preprocessed before actually used, and
the symbol
“${MACHINE_ARCH}
” will be
replaced by what uname -p gives. The
same is done if the string
${MACHINE_GNU_ARCH}
is embedded in
PLIST somewhere - use this on packages that have GNU
autoconf-created configure scripts.
There used to be a symbol
“$ARCH
” that
was replaced by the output of uname
-m, but that's no longer supported and has
been removed.
${OPSYS}
, ${LOWER_OPSYS}
, ${OS_VERSION}
Some packages want to embed the OS name and version
into some paths. To do this, use these variables in the
PLIST
:
${OPSYS}
- output of “uname -s”
${LOWER_OPSYS}
- lowercase common name (eg. “solaris”)
${OS_VERSION}
- “uname -r”
For a list of values which are replaced by
default, the output of make help topic=PLIST_SUBST as
well as searching the pkgsrc/mk
directory with grep for
PLIST_SUBST
should help.
If you want to change other variables not listed above, you
can add variables and their expansions to this variable in the
following way, similar to MESSAGE_SUBST
(see Section 13.5, “Optional files”):
PLIST_SUBST+= SOMEVAR="somevalue"
This replaces all occurrences of “${SOMEVAR}”
in the PLIST
with
“somevalue”.
The PLIST_VARS
variable can be used to simplify
the common case of conditionally including some
PLIST
entries. It can be done by adding
and
setting the corresponding PLIST_VARS
+=fooPLIST.foo
variable
to yes
if the entry should be included.
This will substitute “${PLIST.foo}
”
in the PLIST
with either
“""
” or
“"@comment "
”.
For example, in Makefile
:
PLIST_VARS+= foo
.if condition
PLIST.foo= yes
.else
And then in PLIST
:
@comment $NetBSD $ bin/bar man/man1/bar.1 ${PLIST.foo}bin/foo ${PLIST.foo}man/man1/foo.1 ${PLIST.foo}share/bar/foo.data
An artificial space has been added between NetBSD and $, this is a workaround here to prevent CVS expanding to the filename of the guide. When adding the RCS ID the space should be ommited.
Man pages should be installed in compressed form if
MANZ
is set (in bsd.own.mk
),
and uncompressed otherwise. To handle this in the
PLIST
file, the suffix “.gz” is
appended/removed automatically for man pages according to
MANZ
and MANCOMPRESSED
being set
or not, see above for details. This modification of the
PLIST
file is done on a copy of it, not
PLIST
itself.
To use one or more files as source for the PLIST
used
in generating the binary package, set the variable
PLIST_SRC
to the names of that file(s).
The files are later concatenated using cat(1), and the order of things is
important. The default for PLIST_SRC
is
${PKGDIR}/PLIST
.
Some packages decide to install a different set of files based on the operating system being used. These differences can be automatically handled by using the following files:
PLIST.common
PLIST.${OPSYS}
PLIST.${MACHINE_ARCH}
PLIST.${OPSYS}-${MACHINE_ARCH}
PLIST.common_end
Some packages decide to generate hard-to-guess file names during installation that are hard to wire down.
In such cases, you can set the
GENERATE_PLIST
variable to shell code
terminated (with a semicolon) that will output PLIST entries which
will be appended to the PLIST
You can find one example in editors/xemacs:
GENERATE_PLIST+= ${ECHO} bin/${DISTNAME}-`${WRKSRC}/src/xemacs -sd`.dmp ;
which will append something like
bin/xemacs-21.4.23-54e8ea71.dmp
to the
PLIST
.
A “shared directory” is a directory where multiple (and unrelated) packages install files. These directories were problematic because you had to add special tricks in the PLIST to conditionally remove them, or have some centralized package handle them.
In pkgsrc, it is now easy: Each package should create directories and install files as needed; pkg_delete will remove any directories left empty after uninstalling a package.
If a package needs an empty directory to work, create the directory during installation as usual, and also add an entry to the PLIST:
@pkgdir path/to/empty/directory
or take a look at MAKE_DIRS
and
OWN_DIRS
.
Table of Contents
Buildlink is a framework in pkgsrc that controls what headers and libraries are seen by a package's configure and build processes. This is implemented in a two step process:
Symlink headers and libraries for dependencies into
BUILDLINK_DIR
, which by default is a subdirectory
of WRKDIR
.
Create wrapper scripts that are used in place of the normal compiler
tools that translate -I${LOCALBASE}/include
and
-L${LOCALBASE}/lib
into references to
BUILDLINK_DIR
. The wrapper scripts also make
native compiler on some operating systems look like GCC, so that
packages that expect GCC won't require modifications to build with
those native compilers.
This normalizes the environment in which a package is built so that the
package may be built consistently despite what other software may be
installed. Please note that the normal system header and library paths,
e.g. /usr/include
,
/usr/lib
, etc., are always searched -- buildlink3 is
designed to insulate the package build from non-system-supplied
software.
The process of converting packages to use the buildlink3 framework (“bl3ifying”) is fairly straightforward. The things to keep in mind are:
Ensure that the build always calls the wrapper scripts
instead of the actual toolchain. Some packages are tricky,
and the only way to know for sure is the check
${WRKDIR}/.work.log
to see if the
wrappers are being invoked.
Don't override PREFIX
from within
the package Makefile, e.g. Java VMs, standalone shells,
etc., because the code to symlink files into
${BUILDLINK_DIR}
looks for files
relative to “pkg_info -qp pkgname
”.
Remember that only the
buildlink3.mk
files that you list in a
package's Makefile are added as dependencies for that package.
If a dependency on a particular package is required for its libraries and headers, then we replace:
DEPENDS+= foo>=1.1.0:../../category/foo
with
.include "../../category/foo/buildlink3.mk"
The buildlink3.mk files usually define the required dependencies. If you need a newer version of the dependency when using buildlink3.mk files, then you can define it in your Makefile; for example:
BUILDLINK_API_DEPENDS.foo+= foo>=1.1.0 .include "../../category/foo/buildlink3.mk"
There are several buildlink3.mk
files in pkgsrc/mk
that handle special package issues:
bdb.buildlink3.mk
chooses either
the native or a pkgsrc Berkeley DB implementation based on
the values of BDB_ACCEPTED
and
BDB_DEFAULT
.
curses.buildlink3.mk
: If the system
comes with neither Curses nor NCurses, this will take care
to install the devel/ncurses
package.
krb5.buildlink3.mk
uses the value
of KRB5_ACCEPTED
to choose between
adding a dependency on Heimdal or MIT-krb5 for packages that
require a Kerberos 5 implementation.
motif.buildlink3.mk
checks for a
system-provided Motif installation or adds a dependency on
x11/lesstif
or x11/motif
. The user can set
MOTIF_TYPE
to “dt”,
“lesstif” or “motif”
to choose which Motif version will be used.
readline.buildlink3.mk
checks for a
system-provided GNU readline or editline (libedit) installation,
or adds a dependency on devel/readline
,
devel/editline
. The user can set
READLINE_DEFAULT
to choose readline implementation.
If your package really needs GNU readline library, its Makefile
should include devel/readline/buildlink3.mk
instead of readline.buildlink3.mk
.
oss.buildlink3.mk
defines several
variables that may be used by packages that use the
Open Sound System (OSS) API.
pgsql.buildlink3.mk
will accept
any of the Postgres versions in the variable
PGSQL_VERSIONS_ACCEPTED
and default to
the version PGSQL_VERSION_DEFAULT
. See
the file for more information.
pthread.buildlink3.mk
uses the value of
PTHREAD_OPTS
and checks for native pthreads or adds
a dependency on devel/pth
as needed.
xaw.buildlink3.mk
uses the value of
XAW_TYPE
to choose a particular Athena widgets
library.
The comments in those buildlink3.mk
files provide a more complete
description of how to use them properly.
A package's buildlink3.mk
file is
included by Makefiles to indicate the need to compile and link
against header files and libraries provided by the package. A
buildlink3.mk
file should always provide
enough information to add the correct type of dependency
relationship and include any other
buildlink3.mk
files that it needs to find
headers and libraries that it needs in turn.
To generate an initial buildlink3.mk
file for further editing, Rene Hexel's pkgtools/createbuildlink
package is highly recommended. For most packages, the following
command will generate a good starting point for
buildlink3.mk
files:
%
cd pkgsrc/
category
/pkgdir
%
createbuildlink >buildlink3.mk
The following real-life example
buildlink3.mk
is taken
from pkgsrc/graphics/tiff
:
# $NetBSD: buildlink3.mk,v 1.16 2009/03/20 19:24:45 joerg Exp $ BUILDLINK_TREE+= tiff .if !defined(TIFF_BUILDLINK3_MK) TIFF_BUILDLINK3_MK:= BUILDLINK_API_DEPENDS.tiff+= tiff>=3.6.1 BUILDLINK_ABI_DEPENDS.tiff+= tiff>=3.7.2nb1 BUILDLINK_PKGSRCDIR.tiff?= ../../graphics/tiff .include "../../devel/zlib/buildlink3.mk" .include "../../graphics/jpeg/buildlink3.mk" .endif # TIFF_BUILDLINK3_MK BUILDLINK_TREE+= -tiff
The header and footer manipulate
BUILDLINK_TREE
, which is common across all
buildlink3.mk
files and is used to track
the dependency tree.
The main section is protected from multiple inclusion
and controls how the dependency on pkg
is
added. Several important variables are set in the section:
BUILDLINK_API_DEPENDS.
is the actual dependency recorded in the installed
package; this should always be set using
+= to ensure that
we're appending to any pre-existing list of values. This
variable should be set to the first version of the
package that had an backwards-incompatible API change.
pkg
BUILDLINK_PKGSRCDIR.
is the location of the pkg
pkg
pkgsrc directory.
BUILDLINK_DEPMETHOD.
(not shown above) controls whether we use
pkg
BUILD_DEPENDS
or
DEPENDS
to add the dependency on
pkg
. The build dependency is
selected by setting
BUILDLINK_DEPMETHOD.
to “build”. By default, the full dependency is
used.pkg
BUILDLINK_INCDIRS.
and
pkg
BUILDLINK_LIBDIRS.
(not shown above) are lists of subdirectories of
pkg
${BUILDLINK_PREFIX.
to add to the header and library search paths. These
default to “include” and “lib”
respectively.pkg
}
BUILDLINK_CPPFLAGS.
(not shown above) is the list of preprocessor flags to add
to pkg
CPPFLAGS
, which are passed on to the
configure and build phases. The “-I” option
should be avoided and instead be handled using
BUILDLINK_INCDIRS.
as
above.pkg
The following variables are all optionally defined within
this second section (protected against multiple inclusion) and
control which package files are symlinked into
${BUILDLINK_DIR}
and how their names are
transformed during the symlinking:
BUILDLINK_FILES.
(not shown above) is a shell glob pattern relative to
pkg
${BUILDLINK_PREFIX.
to be symlinked into
pkg
}${BUILDLINK_DIR}
,
e.g. include/*.h
.
BUILDLINK_FILES_CMD.
(not shown above) is a shell pipeline that
outputs to stdout a list of files relative to
pkg
${BUILDLINK_PREFIX.
.
The resulting files are to be symlinked
into pkg
}${BUILDLINK_DIR}
. By default,
this takes the +CONTENTS
of a
pkg
and filters it through
${BUILDLINK_CONTENTS_FILTER.
.pkg
}
BUILDLINK_CONTENTS_FILTER.
(not shown above) is a filter command that filters
pkg
+CONTENTS
input into a list of files
relative to
${BUILDLINK_PREFIX.
on stdout. By default,
pkg
}BUILDLINK_CONTENTS_FILTER.
outputs the contents of the pkg
include
and lib
directories in the package
+CONTENTS
.
BUILDLINK_FNAME_TRANSFORM.
(not shown above) is a list of sed arguments used to
transform the name of the source filename into a
destination filename, e.g. -e
"s|/curses.h|/ncurses.h|g".pkg
This section can additionally include any
buildlink3.mk
needed for
pkg
's library dependencies.
Including these buildlink3.mk
files
means that the headers and libraries for these
dependencies are also symlinked into
${BUILDLINK_DIR}
whenever the pkg
buildlink3.mk
file is included. Dependencies are only added for directly
include buildlink3.mk
files.
When providing a buildlink3.mk
and
including other buildlink3.mk
files in it,
please only add necessary ones, i.e., those whose libraries or
header files are automatically exposed when the package is
use.
In particular, if only an executable
(bin/foo
) is linked against a library, that
library does not need to be propagated in the
buildlink3.mk
file.
The following steps should help you decide if a
buildlink3.mk
file needs to be included:
Look at the installed header files: What headers do they include? The packages providing these files must be buildlinked.
Run ldd
on all installed
libraries and look against what other libraries they link.
Some of the packages providing these probably need to be
buildlinked; however, it's not automatic, since e.g. GTK on
some systems pulls in the X libraries, so they will show up in
the ldd
output, while on others (like OS
X) it won't. ldd
output can thus only be
used as a hint.
These two variables differ in that one describes source compatibility (API) and the other binary compatibility (ABI). The difference is that a change in the API breaks compilation of programs while changes in the ABI stop compiled programs from running.
Changes to the
BUILDLINK_API_DEPENDS.
variable in a pkg
buildlink3.mk
file happen
very rarely. One possible reason is that all packages depending
on this already need a newer version. In case it is bumped see
the description below.
The most common example of an ABI change is that the major
version of a shared library is increased. In this case,
BUILDLINK_ABI_DEPENDS.
should be adjusted to require at least the new package version.
Then the packages that depend on this package need their
pkg
PKGREVISION
s increased and, if they have
buildlink3.mk
files, their
BUILDLINK_ABI_DEPENDS.
adjusted, too. This is needed so pkgsrc will require the correct
package dependency and not settle for an older one when building
the source.pkg
See Section 21.1.5, “Handling dependencies” for
more information about dependencies on other packages,
including the BUILDLINK_ABI_DEPENDS
and
ABI_DEPENDS
definitions.
Please take careful consideration before adjusting
BUILDLINK_API_DEPENDS.
or
pkg
BUILDLINK_ABI_DEPENDS.
as we don't want to cause unneeded package deletions and
rebuilds. In many cases, new versions of packages work just
fine with older dependencies.pkg
Also it is not needed to set
BUILDLINK_ABI_DEPENDS.
when it is identical to
pkg
BUILDLINK_API_DEPENDS.
. pkg
Some packages in pkgsrc install headers and libraries that
coincide with headers and libraries present in the base system.
Aside from a buildlink3.mk
file, these
packages should also include a builtin.mk
file that includes the necessary checks to decide whether using
the built-in software or the pkgsrc software is
appropriate.
The only requirements of a builtin.mk file for
pkg
are:
It should set
USE_BUILTIN.
to either “yes” or “no”
after it is included.pkg
It should not override any
USE_BUILTIN.
which is already set before the
pkg
builtin.mk
file is included.
It should be written to allow multiple inclusion. This
is very important and takes careful
attention to Makefile
coding.
The following is the recommended template for builtin.mk files:
.if !defined(IS_BUILTIN.foo) # # IS_BUILTIN.foo is set to "yes" or "no" depending on whether "foo" # genuinely exists in the system or not. # IS_BUILTIN.foo?= no # BUILTIN_PKG.foo should be set here if "foo" is built-in and its package # version can be determined. # . if !empty(IS_BUILTIN.foo:M[yY][eE][sS]) BUILTIN_PKG.foo?= foo-1.0 . endif .endif # IS_BUILTIN.foo .if !defined(USE_BUILTIN.foo) USE_BUILTIN.foo?= ${IS_BUILTIN.foo} . if defined(BUILTIN_PKG.foo) . for _depend_ in ${BUILDLINK_API_DEPENDS.foo} . if !empty(USE_BUILTIN.foo:M[yY][eE][sS]) USE_BUILTIN.foo!= \ ${PKG_ADMIN} pmatch '${_depend_}' ${BUILTIN_PKG.foo} \ && ${ECHO} "yes" || ${ECHO} "no" . endif . endfor . endif .endif # USE_BUILTIN.foo CHECK_BUILTIN.foo?= no .if !empty(CHECK_BUILTIN.foo:M[nN][oO]) # # Here we place code that depends on whether USE_BUILTIN.foo is set to # "yes" or "no". # .endif # CHECK_BUILTIN.foo
The first section sets
IS_BUILTIN.
depending on if pkg
pkg
really exists
in the base system. This should not be a base system software
with similar functionality to pkg
;
it should only be “yes” if the actual package is
included as part of the base system. This variable is only
used internally within the builtin.mk
file.
The second section sets
BUILTIN_PKG.
to the version of pkg
pkg
in the base
system if it exists (if
IS_BUILTIN.
is “yes”). This variable is only used internally
within the pkg
builtin.mk
file.
The third section sets
USE_BUILTIN.
and is required in all
pkg
builtin.mk
files. The code in this
section must make the determination whether the built-in
software is adequate to satisfy the dependencies listed in
BUILDLINK_API_DEPENDS.
.
This is typically done by comparing
pkg
BUILTIN_PKG.
against each of the dependencies in
pkg
BUILDLINK_API_DEPENDS.
.
pkg
USE_BUILTIN.
must be set to the correct value by the
end of the pkg
builtin.mk
file. Note that
USE_BUILTIN.
may be “yes” even if
pkg
IS_BUILTIN.
is “no” because we may make the determination
that the built-in version of the software is similar enough to
be used as a replacement.pkg
The last section is guarded by
CHECK_BUILTIN.
,
and includes code that uses the value of
pkg
USE_BUILTIN.
set in the previous section. This typically includes, e.g.,
adding additional dependency restrictions and listing additional
files to symlink into pkg
${BUILDLINK_DIR}
(via
BUILDLINK_FILES.
).pkg
When building packages, it's possible to choose whether to set
a global preference for using either the built-in (native)
version or the pkgsrc version of software to satisfy a
dependency. This is controlled by setting
PREFER_PKGSRC
and
PREFER_NATIVE
. These variables take values
of either “yes”, “no”, or a list of
packages. PREFER_PKGSRC
tells pkgsrc to
use the pkgsrc versions of software, while
PREFER_NATIVE
tells pkgsrc to use the
built-in versions. Preferences are determined by the most
specific instance of the package in either
PREFER_PKGSRC
or
PREFER_NATIVE
. If a package is specified
in neither or in both variables, then
PREFER_PKGSRC
has precedence over
PREFER_NATIVE
. For example, to require
using pkgsrc versions of software for all but the most basic
bits on a NetBSD system, you can set:
PREFER_PKGSRC= yes PREFER_NATIVE= getopt skey tcp_wrappers
A package must have a
builtin.mk
file to be listed in PREFER_NATIVE
,
otherwise it is simply ignored in that list.
Setting PREFER_NATIVE
should be performed
straight after bootstrap and PREFER_PKGSRC
during
bootstrap.
Switching between settings globally at a later date can introduce
complications with dependency resolution. This is caused by packages
built with the opposite preference being installed alongside each other.
#
./bootstrap --prefer-pkgsrc yes
Table of Contents
This chapter describes the framework known as
pkginstall
, whose key features are:
Generic installation and manipulation of directories and files
outside the pkgsrc-handled tree, LOCALBASE
.
Automatic handling of configuration files during installation, provided that packages are correctly designed.
Generation and installation of system startup scripts.
Registration of system users and groups.
Registration of system shells.
Automatic updating of fonts databases.
The following sections inspect each of the above points in detail.
You may be thinking that many of the things described here could be
easily done with simple code in the package's post-installation target
(post-install
). This is incorrect,
as the code in them is only executed when building from source. Machines
using binary packages could not benefit from it at all (as the code itself
could be unavailable). Therefore, the only way to achieve any of the items
described above is by means of the installation scripts, which are
automatically generated by pkginstall.
As you already know, the PLIST
file holds a list
of files and directories that belong to a package. The names used in it
are relative to the installation prefix (${PREFIX}
),
which means that it cannot register files outside this directory (absolute
path names are not allowed). Despite this restriction, some packages need
to install files outside this location; e.g., under
${VARBASE}
or
${PKG_SYSCONFDIR}
. The only way to achieve this
is to create such files during installation time by using
installation scripts.
The generic installation scripts are shell scripts that can
contain arbitrary code. The list of scripts to execute is taken from
the INSTALL_FILE
variable, which defaults to
INSTALL
. A similar variable exists for package
removal (DEINSTALL_FILE
, whose default is
DEINSTALL
). These scripts can run arbitrary
commands, so they have the potential to create and manage files
anywhere in the file system.
Using these general installation files is not recommended, but may be needed in some special cases. One reason for avoiding them is that the user has to trust the packager that there is no unwanted or simply erroneous code included in the installation script. Also, previously there were many similar scripts for the same functionality, and fixing a common error involved finding and changing all of them.
The pkginstall framework offers another, standardized way. It
provides generic scripts to abstract the manipulation of such files
and directories based on variables set in the package's
Makefile
. The rest of this section describes
these variables.
The following variables can be set to request the creation of directories anywhere in the file system:
MAKE_DIRS
and OWN_DIRS
contain a list of directories that should be created and should attempt
to be destroyed by the installation scripts. The difference between
the two is that the latter prompts the administrator to remove any
directories that may be left after deinstallation (because they were
not empty), while the former does not. Example:
MAKE_DIRS+= ${VARBASE}/foo/private
MAKE_DIRS_PERMS
and
OWN_DIRS_PERMS
contain a list of tuples describing
which directories should be created and should attempt to be destroyed
by the installation scripts. Each tuple holds the following values,
separated by spaces: the directory name, its owner, its group and its
numerical mode. For example:
MAKE_DIRS_PERMS+= ${VARBASE}/foo/private \ ${REAL_ROOT_USER} ${REAL_ROOT_GROUP} 0700
The difference between the two is exactly the same as their
non-PERMS
counterparts.
Creating non-empty files outside the installation prefix is tricky
because the PLIST
forces all files to be inside it.
To overcome this problem, the only solution is to extract the file in the
known place (i.e., inside the installation prefix) and copy it to the
appropriate location during installation (done by the installation scripts
generated by pkginstall). We will call the former the master
file in the following paragraphs, which describe the variables
that can be used to automatically and consistently handle files outside the
installation prefix:
CONF_FILES
and
REQD_FILES
are pairs of master and target files.
During installation time, the master file is copied to the target one
if and only if the latter does not exist. Upon deinstallation, the
target file is removed provided that it was not modified by the
installation.
The difference between the two is that the latter prompts the administrator to remove any files that may be left after deinstallation (because they were not empty), while the former does not.
CONF_FILES_PERMS
and
REQD_FILES_PERMS
contain tuples describing master
files as well as their target locations. For each of them, it also
specifies their owner, their group and their numeric permissions, in
this order. For example:
REQD_FILES_PERMS+= ${PREFIX}/share/somefile ${VARBASE}/somefile \ ${REAL_ROOT_USER} ${REAL_ROOT_GROUP} 0700
The difference between the two is exactly the same as their
non-PERMS
counterparts.
Configuration files are special in the sense that they are installed
in their own specific directory, PKG_SYSCONFDIR
, and
need special treatment during installation (most of which is automated by
pkginstall). The main concept you must bear in mind is that files marked
as configuration files are automatically copied to the right place (somewhere
inside PKG_SYSCONFDIR
) during installation if
and only if they didn't exist before. Similarly, they will not
be removed if they have local modifications. This ensures that
administrators never lose any custom changes they may have made.
As said before, the PKG_SYSCONFDIR
variable
specifies where configuration files shall be installed. Its contents are
set based upon the following variables:
PKG_SYSCONFBASE
: The configuration's root
directory. Defaults to ${PREFIX}/etc
although it may
be overridden by the user to point to his preferred location (e.g.,
/etc
, /etc/pkg
, etc.).
Packages must not use it directly.
PKG_SYSCONFSUBDIR
: A subdirectory of
PKG_SYSCONFBASE
under which the configuration files
for the package being built shall be installed. The definition of this
variable only makes sense in the package's
Makefile
(i.e., it is not user-customizable).
As an example, consider the Apache package,
www/apache24
, which places its
configuration files under the
httpd/
subdirectory of
PKG_SYSCONFBASE
. This should be set in the package
Makefile.
PKG_SYSCONFVAR
: Specifies the name of the
variable that holds this package's configuration directory (if
different from PKG_SYSCONFBASE
). It defaults to
PKGBASE
's value, and is always prefixed with
PKG_SYSCONFDIR
.
PKG_SYSCONFDIR.${PKG_SYSCONFVAR}
: Holds the
directory where the configuration files for the package identified by
PKG_SYSCONFVAR
's shall be placed.
Based on the above variables, pkginstall determines the value of
PKG_SYSCONFDIR
, which is the only
variable that can be used within a package to refer to its configuration
directory. The algorithm used to set its value is basically the
following:
If PKG_SYSCONFDIR.${PKG_SYSCONFVAR}
is set,
its value is used.
If the previous variable is not defined but
PKG_SYSCONFSUBDIR
is set in the package's
Makefile
, the resulting value is
${PKG_SYSCONFBASE}/${PKG_SYSCONFSUBDIR}
.
Otherwise, it is set to
${PKG_SYSCONFBASE}
.
It is worth mentioning that ${PKG_SYSCONFDIR}
is
automatically added to OWN_DIRS
. See Section 17.1.1, “Directory manipulation” what this means. This does not apply to
subdirectories of ${PKG_SYSCONFDIR}
, they still have to
be created with OWN_DIRS or MAKE_DIRS.
Given that pkgsrc (and users!) expect configuration files to be in a known place, you need to teach each package where it shall install its files. In some cases you will have to patch the package Makefiles to achieve it. If you are lucky, though, it may be as easy as passing an extra flag to the configuration script; this is the case of GNU Autoconf- generated files:
CONFIGURE_ARGS+= --sysconfdir=${PKG_SYSCONFDIR}
Note that this specifies where the package has to look for its configuration files, not where they will be originally installed (although the difference is never explicit, unfortunately).
As said before, pkginstall automatically handles configuration files.
This means that the packages themselves must not
touch the contents of ${PKG_SYSCONFDIR}
directly. Bad news is that many software installation scripts
will, out of the box, mess with the contents of that directory. So what is
the correct procedure to fix this issue?
You must teach the package (usually by manually patching it) to
install any configuration files under the examples hierarchy,
share/examples/${PKGBASE}/
. This way, the
PLIST
registers them and the administrator always
has the original copies available.
Once the required configuration files are in place (i.e., under the
examples hierarchy), the pkginstall framework can use them as master copies
during the package installation to update what is in
${PKG_SYSCONFDIR}
. To achieve this, the variables
CONF_FILES
and CONF_FILES_PERMS
are
used. Check out Section 17.1.2, “File manipulation” for information
about their syntax and their purpose. Here is an example, taken from the
mail/mutt
package:
EGDIR= ${PREFIX}/share/doc/mutt/samples CONF_FILES= ${EGDIR}/Muttrc ${PKG_SYSCONFDIR}/Muttrc
Note that the EGDIR
variable is specific to that
package and has no meaning outside it.
System startup scripts are special files because they must be installed in a place known by the underlying OS, usually outside the installation prefix. Therefore, the same rules described in Section 17.1, “Files and directories outside the installation prefix” apply, and the same solutions can be used. However, pkginstall provides a special mechanism to handle these files.
In order to provide system startup scripts, the package has to:
Store the script inside ${FILESDIR}
, with
the .sh
suffix appended. Considering the
print/cups
package as an example, it has a
cupsd.sh
in its files directory.
Tell pkginstall to handle it, appending the name of the script,
without its extension, to the RCD_SCRIPTS
variable.
Continuing the previous example:
RCD_SCRIPTS+= cupsd
Once this is done, pkginstall will do the following steps for each script in an automated fashion:
Process the file found in the files directory applying all the
substitutions described in the FILES_SUBST
variable.
Copy the script from the files directory to the examples
hierarchy, ${PREFIX}/share/examples/rc.d/
. Note
that this master file must be explicitly registered in the
PLIST
.
Add code to the installation scripts to copy the startup script from the examples hierarchy into the system-wide startup scripts directory.
The automatic copying of config files can be toggled by setting the
environment variable PKG_RCD_SCRIPTS
prior to package
installation. Note that the scripts will be always copied inside the
examples hierarchy, ${PREFIX}/share/examples/rc.d/
, no
matter what the value of this variable is.
If a package needs to create special users and/or groups during installation, it can do so by using the pkginstall framework.
Users can be created by adding entries to the
PKG_USERS
variable. Each entry has the following
syntax:
user:group
Further specification of user details may be done by setting
per-user variables.
PKG_UID.
is the
numeric UID for the user.
user
PKG_GECOS.
is the
user's description or comment.
user
PKG_HOME.
is the
user's home directory, and defaults to
user
/nonexistent
if not specified.
PKG_SHELL.
is the
user's shell, and defaults to user
/sbin/nologin
if
not specified.
Similarly, groups can be created by adding entries to the
PKG_GROUPS
variable, whose syntax is:
group
The numeric GID of the group may be set by defining
PKG_GID.
.group
If a package needs to create the users and groups at an earlier
stage, then it can set USERGROUP_PHASE
to either
configure
,build
, or
pre-install
to indicate the phase before which the
users and groups are created. In this case, the numeric UIDs and GIDs
of the created users and groups are automatically hardcoded into the
final installation scripts.
Packages that install system shells should register them in the shell
database, /etc/shells
, to make things easier to the
administrator. This must be done from the installation scripts to keep
binary packages working on any system. pkginstall provides an easy way to
accomplish this task.
When a package provides a shell interpreter, it has to set the
PKG_SHELL
variable to its absolute file name. This will
add some hooks to the installation scripts to handle it. Consider the
following example, taken from shells/zsh
:
PKG_SHELL= ${PREFIX}/bin/zsh
Packages that install X11 fonts should update the database files that index the fonts within each fonts directory. This can easily be accomplished within the pkginstall framework.
When a package installs X11 fonts, it must list the directories in
which fonts are installed in the
FONTS_DIRS.
variables,
where type
type
can be one of “ttf”,
“type1” or “x11”. This will add hooks to the
installation scripts to run the appropriate commands to update the fonts
database files within each of those directories. For convenience, if the
directory path is relative, it is taken to be relative to the package's
installation prefix. Consider the following example, taken from fonts/dbz-ttf
:
FONTS_DIRS.ttf= ${PREFIX}/share/fonts/X11/TTF
Table of Contents
Many packages have the ability to be built to support different
sets of features. bsd.options.mk
is a framework
in pkgsrc that provides generic handling of those options that
determine different ways in which the packages can be built. It's
possible for the user to specify exactly which sets of options will be
built into a package or to allow a set of global default options
apply.
There are two broad classes of behaviors that one might want to control via options. One is whether some particular feature is enabled in a program that will be built anyway, often by including or not including a dependency on some other package. The other is whether or not an additional program will be built as part of the package. Generally, it is better to make a split package for such additional programs instead of using options, because it enables binary packages to be built which can then be added separately. For example, the foo package might have minimal dependencies (those packages without which foo doesn't make sense), and then the foo-gfoo package might include the GTK frontend program gfoo. This is better than including a gtk option to foo that adds gfoo, because either that option is default, in which case binary users can't get foo without gfoo, or not default, in which case they can't get gfoo. With split packages, they can install foo without having GTK, and later decide to install gfoo (pulling in GTK at that time). This is an advantage to source users too, avoiding the need for rebuilds.
Plugins with widely varying dependencies should usually be split instead of options.
It is often more work to maintain split packages, especially if the upstream package does not support this. The decision of split vs. option should be made based on the likelihood that users will want or object to the various pieces, the size of the dependencies that are included, and the amount of work.
A further consideration is licensing. Non-free parts, or parts that depend on non-free dependencies (especially plugins) should almost always be split if feasible.
Global default options are listed in
PKG_DEFAULT_OPTIONS
, which is a list of the options
that should be built into every package if that option is supported.
This variable should be set in mk.conf
.
The following example shows how
bsd.options.mk
should be used
by the hypothetical ``wibble'' package, either in the package
Makefile
, or in a file,
e.g. options.mk
, that is included by the
main package Makefile
.
PKG_OPTIONS_VAR= PKG_OPTIONS.wibble PKG_SUPPORTED_OPTIONS= wibble-foo ldap PKG_OPTIONS_OPTIONAL_GROUPS= database PKG_OPTIONS_GROUP.database= mysql pgsql PKG_SUGGESTED_OPTIONS= wibble-foo PKG_OPTIONS_LEGACY_VARS+= WIBBLE_USE_OPENLDAP:ldap PKG_OPTIONS_LEGACY_OPTS+= foo:wibble-foo .include "../../mk/bsd.prefs.mk" # this package was previously named wibble2 .if defined(PKG_OPTIONS.wibble2) PKG_LEGACY_OPTIONS+= ${PKG_OPTIONS.wibble2} PKG_OPTIONS_DEPRECATED_WARNINGS+= \ "Deprecated variable PKG_OPTIONS.wibble2 used, use ${PKG_OPTIONS_VAR} instead." .endif .include "../../mk/bsd.options.mk" # Package-specific option-handling ### ### FOO support ### .if !empty(PKG_OPTIONS:Mwibble-foo) CONFIGURE_ARGS+= --enable-foo .endif ### ### LDAP support ### .if !empty(PKG_OPTIONS:Mldap) . include "../../databases/openldap-client/buildlink3.mk" CONFIGURE_ARGS+= --enable-ldap=${BUILDLINK_PREFIX.openldap-client} .endif ### ### database support ### .if !empty(PKG_OPTIONS:Mmysql) . include "../../mk/mysql.buildlink3.mk" .endif .if !empty(PKG_OPTIONS:Mpgsql) . include "../../mk/pgsql.buildlink3.mk" .endif
The first section contains the information about which build options are supported by the package, and any default options settings if needed.
PKG_OPTIONS_VAR
is the name of the
make(1) variable that the user can set to override the default
options. It should be set to
PKG_OPTIONS.pkgbase
. Do not set it to
PKG_OPTIONS.${PKGBASE}, since PKGBASE
is not defined
at the point where the options are processed.
PKG_SUPPORTED_OPTIONS
is a list of
build options supported by the package.
PKG_OPTIONS_OPTIONAL_GROUPS
is a
list of names of groups of mutually exclusive options. The options in
each group are listed in
PKG_OPTIONS_GROUP.
.
The most specific setting of any option from the group takes
precedence over all other options in the group. Options from the
groups will be automatically added to
groupname
PKG_SUPPORTED_OPTIONS
.
PKG_OPTIONS_REQUIRED_GROUPS
is like
PKG_OPTIONS_OPTIONAL_GROUPS
, but building the
packages will fail if no option from the group is
selected.
PKG_OPTIONS_NONEMPTY_SETS
is a list
of names of sets of options. At least one option from each set must
be selected. The options in each set are listed in
PKG_OPTIONS_SET.
.
Options from the sets will be automatically added to
setname
PKG_SUPPORTED_OPTIONS
. Building the package will
fail if no option from the set is selected.
PKG_SUGGESTED_OPTIONS
is a list of
build options which are enabled by default.
PKG_OPTIONS_LEGACY_VARS
is a list
of
“USE_VARIABLE
:option
”
pairs that map legacy mk.conf
variables to
their option counterparts. Pairs should be added with
“+=” to keep the listing of global legacy variables. A
warning will be issued if the user uses a legacy
variable.
PKG_OPTIONS_LEGACY_OPTS
is a list
of
“old-option
:new-option
”
pairs that map options that have been renamed to their new
counterparts. Pairs should be added with “+=” to keep
the listing of global legacy options. A warning will be issued if
the user uses a legacy option.
PKG_LEGACY_OPTIONS
is a list of
options implied by deprecated variables used. This can be used for
cases that neither PKG_OPTIONS_LEGACY_VARS
nor
PKG_OPTIONS_LEGACY_OPTS
can handle, e. g. when
PKG_OPTIONS_VAR
is renamed.
PKG_OPTIONS_DEPRECATED_WARNINGS
is
a list of warnings about deprecated variables or options used, and
what to use instead.
A package should never modify
PKG_DEFAULT_OPTIONS
or the variable named in
PKG_OPTIONS_VAR
. These are strictly user-settable.
To suggest a default set of options, use
PKG_SUGGESTED_OPTIONS
.
PKG_OPTIONS_VAR
must be defined before
including bsd.options.mk
. If none of
PKG_SUPPORTED_OPTIONS
,
PKG_OPTIONS_OPTIONAL_GROUPS
, and
PKG_OPTIONS_REQUIRED_GROUPS
are defined (as can
happen with platform-specific options if none of them is supported on
the current platform), PKG_OPTIONS
is set to the
empty list and the package is otherwise treated as not using the
options framework.
After the inclusion of bsd.options.mk
, the
variable PKG_OPTIONS
contains the list of selected
build options, properly filtered to remove unsupported and duplicate
options.
The remaining sections contain the logic that is specific to
each option. The correct way to check for an option is to check
whether it is listed in PKG_OPTIONS
:
.if !empty(PKG_OPTIONS:Moption
)
Options that enable similar features in different packages (like optional support for a library) should use a common name in all packages that support it (like the name of the library). If another package already has an option with the same meaning, use the same name.
Options that enable features specific to one package, where it's
unlikely that another (unrelated) package has the same (or a similar)
optional feature, should use a name prefixed with
.pkgname
-
If a group of related packages share an optional feature
specific to that group, prefix it with the name of the
“main” package
(e. g. djbware-errno-hack
).
For new options, add a line to
mk/defaults/options.description
. Lines have two
fields, separated by tab. The first field is the option name, the
second its description. The description should be a whole sentence
(starting with an uppercase letter and ending with a period) that
describes what enabling the option does. E. g. “Enable ispell
support.” The file is sorted by option names.
When writing buildlink3.mk
files, it is often necessary to list
different dependencies based on the options with which the package was
built. For querying these options, the file
pkgsrc/mk/pkg-build-options.mk
should be used. A
typical example looks like this:
pkgbase := libpurple .include "../../mk/pkg-build-options.mk" .if !empty(PKG_BUILD_OPTIONS.libpurple:Mdbus) ... .endif
Including pkg-build-options.mk
here will set
the variable PKG_BUILD_OPTIONS.libpurple
to the build
options of the libpurple package, which can then be queried like
PKG_OPTIONS
in the options.mk
file. See the file pkg-build-options.mk
for more
details.
Table of Contents
This chapter gives a detailed description on how a package is
built. Building a package is separated into different
phases (for example fetch
,
build
, install
), all of which are
described in the following sections. Each phase is split into
so-called stages, which take the name of the
containing phase, prefixed by one of pre-
,
do-
or post-
. (Examples are
pre-configure
, post-build
.) Most
of the actual work is done in the do-*
stages.
Never override the regular targets (like
fetch
), if you have to, override the
do-*
ones instead.
The basic steps for building a program are always the same. First the program's source (distfile) must be brought to the local system and then extracted. After any pkgsrc-specific patches to compile properly are applied, the software can be configured, then built (usually by compiling), and finally the generated binaries, etc. can be put into place on the system.
To get more details about what is happening at each step,
you can set the PKG_VERBOSE
variable, or the
PATCH_DEBUG
variable if you are just interested
in more details about the patch step.
Before outlining the process performed by the NetBSD package system in the next section, here's a brief discussion on where programs are installed, and which variables influence this.
The automatic variable PREFIX
indicates
where all files of the final program shall be installed. It is
usually set to LOCALBASE
(/usr/pkg
), or CROSSBASE
for pkgs in the cross
category. The value of
PREFIX
needs to be put
into the various places in the program's source where paths to
these files are encoded. See Section 13.3, “patches/*
” and Section 21.3.1, “Shared libraries - libtool” for more details.
When choosing which of these variables to use, follow the following rules:
PREFIX
always points to the location
where the current pkg will be installed. When referring to a
pkg's own installation path, use
“${PREFIX}”.
LOCALBASE
is where all non-X11 pkgs
are installed. If you need to construct a -I or -L argument
to the compiler to find includes and libraries installed by
another non-X11 pkg, use “${LOCALBASE}”. The name
LOCALBASE
stems from FreeBSD, which
installed all packages in /usr/local
. As
pkgsrc leaves /usr/local
for the system
administrator, this variable is a misnomer.
X11BASE
is where the actual X11
distribution (from xsrc, etc.) is installed. When looking for
standard X11 includes (not those
installed by a package), use “${X11BASE}”.
X11-based packages using imake must set
USE_IMAKE
to be installed correctly under
LOCALBASE
.
Within ${PREFIX}
, packages should
install files according to hier(7), with the exception that
manual pages go into ${PREFIX}/man
, not
${PREFIX}/share/man
.
When building a package, various directories are used to store source files, temporary files, pkgsrc-internal files, and so on. These directories are explained here.
Some of the directory variables contain relative pathnames. There
are two common base directories for these relative directories:
PKGSRCDIR/PKGPATH
is used for directories that are
pkgsrc-specific. WRKSRC
is used for directories
inside the package itself.
PKGSRCDIR
This is an absolute pathname that points to the pkgsrc root directory. Generally, you don't need it.
PKGDIR
This is an absolute pathname that points to the current package.
PKGPATH
This is a pathname relative to
PKGSRCDIR
that points to the current
package.
WRKDIR
This is an absolute pathname pointing to the directory where all work takes place. The distfiles are extracted to this directory. It also contains temporary directories and log files used by the various pkgsrc frameworks, like buildlink or the wrappers.
WRKSRC
This is an absolute pathname pointing to the directory
where the distfiles are extracted. It is usually a direct subdirectory
of WRKDIR
, and often it's the only directory entry
that isn't hidden. This variable may be changed by a package
Makefile
.
The CREATE_WRKDIR_SYMLINK
definition takes either
the value yes or no and defaults
to no. It indicates whether a symbolic link to the
WRKDIR
is to be created in the pkgsrc entry's directory.
If users would like to have their pkgsrc trees behave in a
read-only manner, then the value of
CREATE_WRKDIR_SYMLINK
should be set to
no.
You can run a particular phase by typing make
phase, where phase is the name of the
phase. This will automatically run all phases that are required for this
phase. The default phase is build
, that is, when you
run make without parameters in a package directory,
the package will be built, but not installed.
The first step in building a package is to fetch the distribution files (distfiles) from the sites that are providing them. This is the task of the fetch phase.
In simple cases, MASTER_SITES
defines all URLs from where the distfile, whose name is
derived from the DISTNAME
variable, is
fetched. The more complicated cases are described
below.
The variable DISTFILES
specifies
the list of distfiles that have to be fetched. Its value
defaults to ${DEFAULT_DISTFILES}
and
its value is ${DISTNAME}${EXTRACT_SUFX}
,
so that most packages don't need to define it at all.
EXTRACT_SUFX
is
.tar.gz
by default, but can be changed
freely. Note that if your package requires additional
distfiles to the default one, you cannot just append the
additional filenames using the +=
operator, but you have write for example:
DISTFILES= ${DEFAULT_DISTFILES} additional-files.tar.gz
Each distfile is fetched from a list of sites, usually
MASTER_SITES
. If the package has multiple
DISTFILES
or multiple
PATCHFILES
from different sites, you can
set
SITES.
to the list of URLs where the file
distfile
(including the suffix) can be found.distfile
DISTFILES= ${DISTNAME}${EXTRACT_SUFX} DISTFILES+= foo-file.tar.gz SITES.foo-file.tar.gz= \ http://www.somewhere.com/somehow/ \ http://www.somewhereelse.com/mirror/somehow/
When actually fetching the distfiles, each item from
MASTER_SITES
or
SITES.*
gets the name of each distfile
appended to it, without an intermediate slash. Therefore,
all site values have to end with a slash or other separator
character. This allows for example to set
MASTER_SITES
to a URL of a CGI script
that gets the name of the distfile as a parameter. In this
case, the definition would look like:
MASTER_SITES= http://www.example.com/download.cgi?file=
The exception to this rule are URLs starting with a dash.
In that case the URL is taken as is, fetched and the result
stored under the name of the distfile. You can use this style
for the case when the download URL style does not match the
above common case. For example, if permanent download URL is a
redirector to the real download URL, or the download file name
is offered by an HTTP Content-Disposition header. In the
following example, foo-1.0.0.tar.gz
will be
created instead of the default
v1.0.0.tar.gz
.
DISTNAME= foo-1.0.0 MASTER_SITES= -http://www.example.com/archive/v1.0.0.tar.gz
There are some predefined values for
MASTER_SITES
, which can be used in
packages. The names of the variables should speak for
themselves.
MASTER_SITE_APACHE | MASTER_SITE_BACKUP |
MASTER_SITE_CRATESIO | MASTER_SITE_CYGWIN |
MASTER_SITE_DEBIAN | MASTER_SITE_FREEBSD |
MASTER_SITE_FREEBSD_LOCAL | MASTER_SITE_GENTOO |
MASTER_SITE_GITHUB | MASTER_SITE_GNOME |
MASTER_SITE_GNU | MASTER_SITE_GNUSTEP |
MASTER_SITE_HASKELL_HACKAGE | MASTER_SITE_IFARCHIVE |
MASTER_SITE_KDE | MASTER_SITE_MOZILLA |
MASTER_SITE_MOZILLA_ALL | MASTER_SITE_MYSQL |
MASTER_SITE_NETLIB | MASTER_SITE_OPENBSD |
MASTER_SITE_OPENOFFICE | MASTER_SITE_OSDN |
MASTER_SITE_PERL_CPAN | MASTER_SITE_PGSQL |
MASTER_SITE_PYPI | MASTER_SITE_RUBYGEMS |
MASTER_SITE_R_CRAN | MASTER_SITE_SOURCEFORGE |
MASTER_SITE_SUNSITE | MASTER_SITE_SUSE |
MASTER_SITE_TEX_CTAN | MASTER_SITE_XCONTRIB |
MASTER_SITE_XEMACS | MASTER_SITE_XORG |
Some explanations for the less self-explaining ones:
MASTER_SITE_BACKUP
contains backup sites
for packages that are maintained in ftp://ftp.NetBSD.org/pub/pkgsrc/distfiles/${DIST_SUBDIR}. MASTER_SITE_LOCAL
contains local
package source distributions that are maintained in ftp://ftp.NetBSD.org/pub/pkgsrc/distfiles/LOCAL_PORTS/.
If you choose one of these predefined sites, you may want to specify a subdirectory of that site. Since these macros may expand to more than one actual site, you must use the following construct to specify a subdirectory:
MASTER_SITES= ${MASTER_SITE_GNU:=subdirectory/name/} MASTER_SITES= ${MASTER_SITE_SOURCEFORGE:=project_name/}
Note the trailing slash after the subdirectory name.
The fetch phase makes sure that
all the distfiles exist in a local directory
(DISTDIR
, which can be set by the pkgsrc
user). If the files do not exist, they are fetched using
commands of the form
${FETCH_CMD} ${FETCH_BEFORE_ARGS} ${site}${file} ${FETCH_AFTER_ARGS}
where ${site}
varies through
several possibilities in turn: first,
MASTER_SITE_OVERRIDE
is tried, then the
sites specified in either SITES.file
if
defined, else MASTER_SITES
or
PATCH_SITES
, as applies, then finally the
value of MASTER_SITE_BACKUP
. The order of
all except the first and the last can be optionally sorted
by the user, via setting either
MASTER_SORT_RANDOM
, and
MASTER_SORT_AWK
or
MASTER_SORT_REGEX
.
The specific command and arguments used depend on the
FETCH_USING
parameter. The example above is
for FETCH_USING=custom
.
The distfiles mirror run by the NetBSD Foundation uses the
mirror-distfiles target to mirror the
distfiles, if they are freely distributable. Packages setting
NO_SRC_ON_FTP
(usually to
“${RESTRICTED}”) will not have their distfiles
mirrored.
After the distfile(s) are fetched, their checksum is generated and compared with the checksums stored in the distinfo file. If the checksums don't match, the build is aborted. This is to ensure the same distfile is used for building, and that the distfile wasn't changed, e.g. by some malign force, deliberately changed distfiles on the master distribution site or network lossage.
When the distfiles are present on the local system, they need to be extracted, as they usually come in the form of some compressed archive format.
By default, all DISTFILES
are
extracted. If you only need some of them, you can set the
EXTRACT_ONLY
variable to the list of those
files.
Extracting the files is usually done by a little
program, mk/extract/extract
, which
already knows how to extract various archive formats, so most
likely you will not need to change anything here. But if you
need, the following variables may help you:
EXTRACT_OPTS_{BIN,LHA,PAX,RAR,TAR,ZIP,ZOO}
Use these variables to override the default
options for an extract command, which are defined in
mk/extract/extract
.
EXTRACT_USING
This variable can be set to
bsdtar
, gtar
, nbtar
(which is the default value), pax
, or an
absolute pathname pointing to the command with which tar
archives should be extracted. It is preferred to choose bsdtar over gtar
if NetBSD's pax-as-tar is not good enough.
If the extract
program doesn't
serve your needs, you can also override the
EXTRACT_CMD
variable, which holds the
command used for extracting the files. This command is
executed in the ${WRKSRC}
directory. During execution of this command, the shell
variable extract_file
holds the absolute
pathname of the file that is going to be extracted.
And if that still does not suffice, you can override the
do-extract
target in the package
Makefile.
After extraction, all the patches named by the
PATCHFILES
, those present in the patches
subdirectory of the package as well as in
$LOCALPATCHES/$PKGPATH (e.g.
/usr/local/patches/graphics/png
) are
applied. Patchfiles ending in .Z
or
.gz
are uncompressed before they are
applied, files ending in .orig
or
.rej
are ignored. Any special options to
patch(1) can be handed in
PATCH_DIST_ARGS
. See Section 13.3, “patches/*
” for more details.
By default patch(1) is given special args to make it fail if the patches apply with some lines of fuzz. Please fix (regen) the patches so that they apply cleanly. The rationale behind this is that patches that don't apply cleanly may end up being applied in the wrong place, and cause severe harm there.
This is covered in Chapter 20, Tools needed for building or running.
This phase creates wrapper programs for the compilers and linkers. The following variables can be used to tweak the wrappers.
ECHO_WRAPPER_MSG
The command used to print progress
messages. Does nothing by default. Set to
${ECHO}
to see the progress
messages.
WRAPPER_DEBUG
This variable can be set to
yes
(default) or no
,
depending on whether you want additional information in the
wrapper log file.
WRAPPER_UPDATE_CACHE
This variable can be set to
yes
or no
, depending
on whether the wrapper should use its cache, which will
improve the speed. The default value is
yes
, but is forced to
no
if the platform does not support
it.
WRAPPER_REORDER_CMDS
A list of reordering commands. A reordering
command has the form
reorder:l:
.
It ensures that that
lib1
:lib2
-l
occurs
before lib1
-l
.
lib2
WRAPPER_TRANSFORM_CMDS
A list of transformation commands. [TODO: investigate further]
Most pieces of software need information on the header files, system calls, and library routines which are available on the platform they run on. The process of determining this information is known as configuration, and is usually automated. In most cases, a script is supplied with the distfiles, and its invocation results in generation of header files, Makefiles, etc.
If the package contains a configure script, this can be
invoked by setting HAS_CONFIGURE
to
“yes”. If the configure script is a GNU autoconf
script, you should set GNU_CONFIGURE
to
“yes” instead. What happens in the
configure phase is roughly:
.for d in ${CONFIGURE_DIRS} cd ${WRKSRC} \ && cd ${d} \ && env ${CONFIGURE_ENV} ${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS} .endfor
CONFIGURE_DIRS
(default:
“.”) is a list of pathnames relative to
WRKSRC
. In each of these directories, the
configure script is run with the environment
CONFIGURE_ENV
and arguments
CONFIGURE_ARGS
. The variables
CONFIGURE_ENV
,
CONFIGURE_SCRIPT
(default:
“./configure”) and
CONFIGURE_ARGS
may all be changed by the
package.
If the program uses the Perl way of configuration (mainly Perl
modules, but not only), i.e. a file called
Makefile.PL
, it should include
../../lang/perl5/module.mk
. To set any parameter for
Makefile.PL
use the MAKE_PARAMS
variable (e.g., MAKE_PARAMS+=foo=bar
If the program uses an Imakefile
for configuration, the appropriate steps can be invoked by
setting USE_IMAKE
to
“yes”. If you only need xmkmf, add it to USE_TOOLS
.
You can add variables to xmkmf's environment by adding them to the
SCRIPTS_ENV
variable.
If the program uses cmake
for configuration, the appropriate steps can be invoked by
setting USE_CMAKE
to “yes”.
You can add variables to cmake's environment by adding them to the
CONFIGURE_ENV
variable and arguments to cmake
by adding them to the CMAKE_ARGS
variable.
The top directory argument is given by the
CMAKE_ARG_PATH
variable, that defaults to
“.” (relative to CONFIGURE_DIRS
)
If there is no configure step at all, set
NO_CONFIGURE
to “yes”.
For building a package, a rough equivalent of the following code is executed.
.for d in ${BUILD_DIRS} cd ${WRKSRC} \ && cd ${d} \ && env ${MAKE_ENV} \ ${MAKE_PROGRAM} ${BUILD_MAKE_FLAGS} \ -f ${MAKE_FILE} \ ${BUILD_TARGET} .endfor
BUILD_DIRS
(default:
“.”) is a list of pathnames relative to
WRKSRC
. In each of these directories,
MAKE_PROGRAM
is run with the environment
MAKE_ENV
and arguments
BUILD_MAKE_FLAGS
. The variables
MAKE_ENV
,
BUILD_MAKE_FLAGS
,
MAKE_FILE
and
BUILD_TARGET
may all be changed by the
package.
The default value of MAKE_PROGRAM
is
“gmake” if USE_TOOLS
contains
“gmake”, “make” otherwise. The
default value of MAKE_FILE
is
“Makefile”, and BUILD_TARGET
defaults to “all”.
If there is no build step at all, set
NO_BUILD
to “yes”.
Once the build stage has completed, the final step is to install the software in public directories, so users can access the programs and files.
In the install phase, a rough equivalent of the following code is executed. Additionally, before and after this code, much magic is performed to do consistency checks, registering the package, and so on.
.for d in ${INSTALL_DIRS} cd ${WRKSRC} \ && cd ${d} \ && env ${MAKE_ENV} \ ${MAKE_PROGRAM} ${INSTALL_MAKE_FLAGS} \ -f ${MAKE_FILE} \ ${INSTALL_TARGET} .endfor
The variable's meanings are analogous to the ones in the
build phase.
INSTALL_DIRS
defaults to
BUILD_DIRS
. INSTALL_TARGET
is “install” by default, plus
“install.man” if USE_IMAKE
is
defined and NO_INSTALL_MANPAGES
is not
defined.
In the install phase, the following
variables are useful. They are all variations of the
install(1) command that have the owner, group and
permissions preset. INSTALL
is the plain
install command. The specialized variants, together with their
intended use, are:
INSTALL_PROGRAM_DIR
directories that contain binaries
INSTALL_SCRIPT_DIR
directories that contain scripts
INSTALL_LIB_DIR
directories that contain shared and static libraries
INSTALL_DATA_DIR
directories that contain data files
INSTALL_MAN_DIR
directories that contain man pages
INSTALL_GAME_DIR
directories that contain data files for games
INSTALL_PROGRAM
binaries that can be stripped from debugging symbols
INSTALL_SCRIPT
binaries that cannot be stripped
INSTALL_GAME
game binaries
INSTALL_LIB
shared and static libraries
INSTALL_DATA
data files
INSTALL_GAME_DATA
data files for games
INSTALL_MAN
man pages
Some other variables are:
INSTALL_UNSTRIPPED
If set to yes
, do not run strip(1)
when installing binaries. Any debugging sections and symbols present in
binaries will be preserved.
INSTALLATION_DIRS
A list of directories relative to
PREFIX
that are created by pkgsrc at the
beginning of the install phase.
The package is supposed to create all needed directories itself
before installing files to it and list all other directories here.
In the rare cases that a package shouldn't install anything,
set NO_INSTALL
to “yes”. This is
mostly relevant for packages in the regress
category.
Once the install stage has completed, a binary package of the installed files can be built. These binary packages can be used for quick installation without previous compilation, e.g. by the make bin-install or by using pkg_add.
By default, the binary packages are created in
${PACKAGES}/All
and symlinks are created in
${PACKAGES}/
,
one for each category in the category
CATEGORIES
variable. PACKAGES
defaults to
pkgsrc/packages
.
Once you're finished with a package, you can clean the work directory by running make clean. If you want to clean the work directories of all dependencies too, use make clean-depends.
For any of the main targets described in the previous section, two auxiliary targets exist with “pre-” and “post-” used as a prefix for the main target's name. These targets are invoked before and after the main target is called, allowing extra configuration or installation steps be performed from a package's Makefile, for example, which a program's configure script or install target omitted.
Should one of the main targets do the wrong thing, and should there be no variable to fix this, you can redefine it with the do-* target. (Note that redefining the target itself instead of the do-* target is a bad idea, as the pre-* and post-* targets won't be called anymore, etc.) You will not usually need to do this.
If you did a make install and you noticed some file was not installed properly, you can repeat the installation with this target, which will ignore the “already installed” flag.
This is the default value of
DEPENDS_TARGET
except in the case of
make update and make
package, where the defaults are
“package” and “update”,
respectively.
This target does a pkg_delete(1) in the current directory, effectively de-installing the package. The following variables can be used to tune the behaviour:
PKG_VERBOSE
Add a "-v" to the pkg_delete(1) command.
DEINSTALLDEPENDS
Remove all packages that require (depend on)
the given package. This can be used to remove any
packages that may have been pulled in by a given
package, e.g. if make deinstall
DEINSTALLDEPENDS=1 is done in
pkgsrc/x11/kde
, this is
likely to remove whole KDE. Works by adding
“-R” to the pkg_delete(1)
command line.
Install a binary package from local disk and via FTP
from a list of sites (see the
BINPKG_SITES
variable), and do a
make package if no binary package is
available anywhere. The arguments given to
pkg_add can be set via
BIN_INSTALL_FLAGS
e.g., to do verbose
operation, etc.
This target removes the state files for the "install" and later phases so that the "install" target may be re-invoked. This can be used after editing the PLIST to install the package without rebuilding it.
This target removes the state files for the "build" and later phases so that the "build" target may be re-invoked.
This target causes the current package to be
updated to the latest version. The package and all
depending packages first get de-installed, then current
versions of the corresponding packages get compiled and
installed. This is similar to manually noting which
packages are currently installed, then performing a
series of make deinstall and
make install (or whatever
UPDATE_TARGET
is set to) for these
packages.
You can use the “update” target to
resume package updating in case a previous make
update was interrupted for some reason.
However, in this case, make sure you don't call
make clean or otherwise remove the
list of dependent packages in WRKDIR
.
Otherwise, you lose the ability to automatically update
the current package along with the dependent packages
you have installed.
Resuming an interrupted make update will only work as long as the package tree remains unchanged. If the source code for one of the packages to be updated has been changed, resuming make update will most certainly fail!
The following variables can be used either on the
command line or in mk.conf
to
alter the behaviour of make
update:
UPDATE_TARGET
Install target to recursively use for the
updated package and the dependent packages.
Defaults to DEPENDS_TARGET
if
set, “install” otherwise for
make update. Other good
targets are “package” or
“bin-install”. Do not set this to
“update” or you will get stuck in an
endless loop!
NOCLEAN
Don't clean up after updating. Useful if you want to leave the work sources of the updated packages around for inspection or other purposes. Be sure you eventually clean up the source tree (see the “clean-update” target below) or you may run into troubles with old source code still lying around on your next make or make update.
REINSTALL
Deinstall each package before installing
(making DEPENDS_TARGET
). This
may be necessary if the
“clean-update” target (see below) was
called after interrupting a running make
update.
DEPENDS_TARGET
Allows you to disable recursion and hardcode
the target for packages. The default is
“update” for the update target,
facilitating a recursive update of prerequisite
packages. Only set
DEPENDS_TARGET
if you want to
disable recursive updates. Use
UPDATE_TARGET
instead to just
set a specific target for each package to be
installed during make update
(see above).
Clean the source tree for all packages that would
get updated if make update was called
from the current directory. This target should not be
used if the current package (or any of its depending
packages) have already been de-installed (e.g., after
calling make update) or you may lose
some packages you intended to update. As a rule of
thumb: only use this target before
the first time you run make update
and only if you have a dirty package tree (e.g., if you
used NOCLEAN
).
If you are unsure about whether your tree is clean, you can either perform a make clean at the top of the tree, or use the following sequence of commands from the directory of the package you want to update (before running make update for the first time, otherwise you lose all the packages you wanted to update!):
#
make clean-update
#
make clean CLEANDEPENDS=YES
#
make update
The following variables can be used either on the
command line or in mk.conf
to alter the behaviour of
make clean-update:
CLEAR_DIRLIST
After make clean, do not
reconstruct the list of directories to update for
this package. Only use this if make
update successfully installed all
packages you wanted to update. Normally, this is
done automatically on make
update, but may have been suppressed by
the NOCLEAN
variable (see
above).
Update the installation of the current package. This
differs from update in that it does not replace dependent
packages. You will need to install pkgtools/pkg_tarup
for this
target to work.
Be careful when using this target! There are no guarantees that dependent packages will still work, in particular they will most certainly break if you make replace a library package whose shared library major version changed between your installed version and the new one. For this reason, this target is not officially supported and only recommended for advanced users.
This target invokes pkg_info(1) for the current package. You can use this to check which version of a package is installed.
This is a top-level command, i.e. it should be used in
the pkgsrc
directory. It creates a
database of all packages in the local pkgsrc tree, including
dependencies, comment, maintainer, and some other useful
information. Individual entries are created by running
make describe in the packages'
directories. This index file is saved as
pkgsrc/INDEX
. It can be displayed in
verbose format by running make
print-index. You can search in it with
make search
key=something
. You can
extract a list of all packages that depend on a particular
one by running make show-deps
PKG=somepackage
.
Running this command takes a very long time, some hours even on fast machines!
This target generates a
README.html
file, which can be
viewed using a browser such as www/firefox
or www/links
. The generated files
contain references to any packages which are in the
PACKAGES
directory on the local
host. The generated files can be made to refer to URLs
based on FTP_PKG_URL_HOST
and
FTP_PKG_URL_DIR
. For example, if I
wanted to generate README.html
files which pointed to binary packages on the local
machine, in the directory
/usr/packages
, set
FTP_PKG_URL_HOST=file://localhost
and
FTP_PKG_URL_DIR=/usr/packages
. The
${PACKAGES}
directory and its
subdirectories will be searched for all the binary
packages.
The target can be run at the toplevel or in category directories, in which case it descends recursively.
This is a top-level command, run it in
pkgsrc
. Use this target to create a
file README-all.html
which contains a
list of all packages currently available in the NetBSD
Packages Collection, together with the category they belong
to and a short description. This file is compiled from the
pkgsrc/*/README.html
files, so be sure
to run this after a make
readme.
This is very much the same as the
“readme” target (see above), but is to be
used when generating a pkgsrc tree to be written to a
CD-ROM. This target also produces
README.html
files, and can be made
to refer to URLs based on
CDROM_PKG_URL_HOST
and
CDROM_PKG_URL_DIR
.
This target shows which distfiles and patchfiles
are needed to build the package
(ALLFILES
, which contains all
DISTFILES
and
PATCHFILES
, but not
patches/*
).
This target shows nothing if the package is not installed. If a version of this package is installed, but is not the version provided in this version of pkgsrc, then a warning message is displayed. This target can be used to show which of your installed packages are downlevel, and so the old versions can be deleted, and the current ones added.
This target shows the directory in the pkgsrc hierarchy from which the package can be built and installed. This may not be the same directory as the one from which the package was installed. This target is intended to be used by people who may wish to upgrade many packages on a single host, and can be invoked from the top-level pkgsrc Makefile by using the “show-host-specific-pkgs” target.
This target shows which installed packages match
the current package's DEPENDS
. Useful
if out of date dependencies are causing build
problems.
This target shows the list of packages that the current package depends on for building.
This target shows the list of packages that the current package depends on for running.
After a package is installed, check all its
binaries and (on ELF platforms) shared libraries to see
if they find the shared libs they need. Run by default
if PKG_DEVELOPER
is set in mk.conf
.
After a “make install” from a new or
upgraded pkg, this prints out an attempt to generate a
new PLIST
from a find
-newer work/.extract_done. An attempt is made
to care for shared libs etc., but it is
strongly recommended to review the
result before putting it into
PLIST
. On upgrades, it's useful to
diff the output of this command against an already
existing PLIST
file.
If the package installs files via tar(1) or
other methods that don't update file access times, be
sure to add these files manually to your
PLIST
, as the “find
-newer” command used by this target won't catch
them!
See Section 15.3, “Tweaking output of make print-PLIST” for more information on this target.
Used to do bulk builds. If an appropriate binary
package already exists, no action is taken. If not, this
target will compile, install and package it (and its
depends, if PKG_DEPENDS
is set
properly. See Chapter 8, Creating binary packages for everything in pkgsrc (bulk
builds)).
After creating the binary package, the sources, the
just-installed package and its required packages are
removed, preserving free disk space.
Beware that this target may deinstall all packages installed on a system!
Used during bulk-installs to install required packages. If an up-to-date binary package is available, it will be installed via pkg_add(1). If not, make bulk-package will be executed, but the installed binary won't be removed.
A binary package is considered “up-to-date” to be installed via pkg_add(1) if:
None of the package's files
(Makefile
, ...) were modified
since it was built.
None of the package's required (binary) packages were modified since it was built.
Beware that this target may deinstall all packages installed on a system!
Table of Contents
The USE_TOOLS
definition is used both internally
by pkgsrc and also for individual packages to define what commands
are needed for building a package (like TOOL_DEPENDS
)
or for later run-time of an installed packaged (such as
DEPENDS
).
If the native system provides an adequate tool, then in many cases, a pkgsrc
package will not be used.
When building a package, the replacement tools are made available in a directory (as symlinks or wrapper scripts) that is early in the executable search path. Just like the buildlink system, this helps with consistent builds.
A tool may be needed to help build a specific package. For example, perl, GNU make (gmake) or yacc may be needed.
Also a tool may be needed, for example, because the native system's supplied tool may be inefficient for building a package with pkgsrc. For example, a package may need GNU awk, bison (instead of yacc) or a better sed.
The tools used by a package can be listed by running make show-tools.
The default set of tools used by pkgsrc is defined in
bsd.pkg.mk
. This includes standard Unix tools,
such as: cat, awk,
chmod, test, and so on.
These can be seen by running:
make show-var VARNAME=USE_TOOLS.
If a package needs a specific program to build
then the USE_TOOLS
variable can be used
to define the tools needed.
In the following examples, the :run means that it is needed at run-time (and becomes a DEPENDS). The default is a build dependency which can be set with :build. (So in this example, it is the same as gmake:build and pkg-config:build.)
USE_TOOLS+= gmake perl:run pkg-config
When using the tools framework, a
TOOLS_PATH.foo
variable is defined
which contains the full path to the appropriate tool. For example,
TOOLS_PATH.bash
could be “/bin/bash”
on Linux systems.
If you always need a pkgsrc version of the
tool at run-time, then just use DEPENDS
instead.
When improving or porting pkgsrc to a new platform, have a look
at (or create) the corresponding platform specific make file fragment under
pkgsrc/mk/tools/tools.${OPSYS}.mk
which defines
the name of the common tools. For example:
.if exists(/usr/bin/bzcat) TOOLS_PLATFORM.bzcat?= /usr/bin/bzcat .elif exists(/usr/bin/bzip2) TOOLS_PLATFORM.bzcat?= /usr/bin/bzip2 -cd .endif TOOLS_PLATFORM.true?= true # shell builtin
Table of Contents
mk.conf
One appealing feature of pkgsrc is that it runs on many different platforms. As a result, it is important to ensure, where possible, that packages in pkgsrc are portable. This chapter mentions some particular details you should pay attention to while working on pkgsrc.
mk.conf
The pkgsrc user can configure pkgsrc by overriding several
variables in the file pointed to by MAKECONF
,
which is mk.conf
by default. When you
want to use those variables in the preprocessor directives of
make(1) (for example .if
or
.for
), you need to include the file
../../mk/bsd.prefs.mk
before, which in turn
loads the user preferences.
But note that some variables may not be completely defined
after ../../mk/bsd.prefs.mk
has been
included, as they may contain references to variables that are
not yet defined. In shell commands (the lines in
Makefile
that are indented with a tab) this
is no problem, since variables are only expanded when they are
used. But in the preprocessor directives mentioned above and in
dependency lines (of the form target:
dependencies
) the variables are expanded at load
time.
To check whether a variable can be used at load time, run pkglint -Wall on your package.
Occasionally, packages require interaction from the user, and this can be in a number of ways:
When fetching the distfiles, some packages require user interaction such as entering username/password or accepting a license on a web page.
When extracting the distfiles, some packages may ask for passwords.
help to configure the package before it is built
help during the build process
help during the installation of a package
A package can set the INTERACTIVE_STAGE
variable to define which stages need interaction. This should be
done in the package's Makefile
, e.g.:
INTERACTIVE_STAGE= configure install
The user can then decide to skip this package by setting the
BATCH
variable. Packages that require interaction
are also excluded from bulk builds.
Authors of software can choose the licence under which software can be copied. The Free Software Foundation has declared some licenses "Free", and the Open Source Initiative has a definition of "Open Source".
By default, pkgsrc allows packages with Free or Open Source
licenses to be built. To allow packages with other licenses to be
built as well, the pkgsrc user needs to add these licenses to the
ACCEPTABLE_LICENSES
variable in mk.conf
. Note
that this variable only affects which packages may be
built, while the license terms often also
restrict the actual use of the package and its redistribution.
One might want to only install packages with a BSD license,
or the GPL, and not the other. The free licenses are added to the
default ACCEPTABLE_LICENSES
variable. The pkgsrc
user can override the default by setting the
ACCEPTABLE_LICENSES
variable with "=" instead
of "+=". The licenses accepted by default are defined in the
DEFAULT_ACCEPTABLE_LICENSES
variable in the file
pkgsrc/mk/license.mk
.
The license tag mechanism is intended to address
copyright-related issues surrounding building, installing and
using a package, and not to address redistribution issues (see
RESTRICTED
and
NO_SRC_ON_FTP
, etc.).
Packages with redistribution restrictions should set these
tags.
Denoting that a package may be copied according to a
particular license is done by placing the license in
pkgsrc/licenses
and setting the
LICENSE
variable to a string identifying the
license, e.g. in graphics/xv
:
LICENSE= xv-license
When trying to build, the user will get a notice that the
package is covered by a license which has not been placed in the
ACCEPTABLE_LICENSES
variable:
%
make
===> xv-3.10anb9 has an unacceptable license: xv-license. ===> To view the license, enter "/usr/bin/make show-license". ===> To indicate acceptance, add this line to your /etc/mk.conf: ===> ACCEPTABLE_LICENSES+=xv-license *** Error code 1
The license can be viewed with make
show-license, and if the user so chooses, the line
printed above can be added to mk.conf
to
convey to pkgsrc that it should not in the future fail because of
that license:
ACCEPTABLE_LICENSES+=xv-license
The use of LICENSE=shareware
,
LICENSE=no-commercial-use
, and similar language
is deprecated because it does not crisply refer to a particular
license text. Another problem with such usage is that it does not
enable a user to tell pkgsrc to proceed for a single package
without also telling pkgsrc to proceed for all packages with that
tag.
When adding a package with a new license, the following steps are required:
Check whether the license qualifies as Free or Open Source by
referencing Various
Licenses and Comments about Them and Licenses by Name |
Open Source Initiative. If this is the case, the filename in
pkgsrc/licenses/
does not need the
-license
suffix, and the license name should be
added to:
DEFAULT_ACCEPTABLE_LICENSES in
pkgsrc/mk/license.mk
default_acceptable_licenses in
pkgsrc/pkgtools/pkg_install/files/lib/license.c
The license text should be added to
pkgsrc/licenses
for displaying. A list of known
licenses can be seen in this directory.
When the license changes (in a way other than formatting), make sure that the new license has a different name (e.g., append the version number if it exists, or the date). Just because a user told pkgsrc to build programs under a previous version of a license does not mean that pkgsrc should build programs under the new licenses. The higher-level point is that pkgsrc does not evaluate licenses for reasonableness; the only test is a mechanistic test of whether a particular text has been approved by either of two bodies (FSF or OSI).
Some licenses restrict how software may be re-distributed. By declaring the restrictions, package tools can automatically refrain from e.g. placing binary packages on FTP sites.
There are four possible restrictions, which are the cross product of sources (distfiles) and binaries not being placed on FTP sites and CD-ROMs. Because this is rarely the exact language in any license, and because non-Free licenses tend to be different from each other, pkgsrc adopts a definition of FTP and CD-ROM. "FTP" means making the source or binary file available over the Internet at no charge. "CD-ROM" means making the source or binary available on some kind of media, together with other source and binary packages, which is sold for a distribution charge.
In order to encode these restrictions, the package system defines five make variables that can be set to note these restrictions:
RESTRICTED
This variable should be set whenever a restriction exists (regardless of its kind). Set this variable to a string containing the reason for the restriction. It should be understood that those wanting to understand the restriction will have to read the license, and perhaps seek advice of counsel.
NO_BIN_ON_CDROM
Binaries may not be placed on CD-ROM containing other
binary packages, for which a distribution charge may be made.
In this case, set this variable to
${RESTRICTED}
.
NO_BIN_ON_FTP
Binaries may not made available on the Internet without
charge. In this case, set this variable to
${RESTRICTED}
. If this variable is set,
binary packages will not be included on ftp.NetBSD.org.
NO_SRC_ON_CDROM
Distfiles may not be placed on CD-ROM, together with
other distfiles, for which a fee may be charged. In this
case, set this variable to ${RESTRICTED}
.
NO_SRC_ON_FTP
Distfiles may not made available via FTP at no charge.
In this case, set this variable to
${RESTRICTED}
. If this variable is set,
the distfile(s) will not be mirrored on ftp.NetBSD.org.
Please note that packages will be removed from pkgsrc when the distfiles are not distributable and cannot be obtained for a period of one full quarter branch. Packages with manual/interactive fetch must have a maintainer and it is his/her responsibility to ensure this.
Your package may depend on some other package being present
- and there are various ways of expressing this dependency.
pkgsrc supports the BUILD_DEPENDS
and
DEPENDS
and
TOOL_DEPENDS
definitions, the
USE_TOOLS
definition, as well as dependencies
via buildlink3.mk
, which is the preferred way
to handle dependencies, and which uses the variables named above.
See Chapter 16, Buildlink methodology for more information.
The basic difference between the two variables is as
follows: The DEPENDS
definition registers
that pre-requisite in the binary package so it will be pulled in
when the binary package is later installed, whilst the
BUILD_DEPENDS
and TOOL_DEPENDS
definitions does not, marking a dependency that is only needed for
building the package.
This means that if you only need a package present whilst
you are building, it should be noted as a
TOOL_DEPENDS
or
BUILD_DEPENDS
. When cross-compiling,
TOOL_DEPENDS
are native
packages, i.e. packages for the architecture where the package
is built;
BUILD_DEPENDS
are target
packages, i.e. packages for the architecture for which the package
is built.
The format for BUILD_DEPENDS
,
DEPENDS
and TOOL_DEPENDS
definition is:
<pre-req-package-name>:../../<category>/<pre-req-package>
Please note that the “pre-req-package-name” may include any of the wildcard version numbers recognized by pkg_info(1).
If your package needs another package's binaries or
libraries to build and run, and if that package has a
buildlink3.mk
file available, use it:
.include "../../graphics/jpeg/buildlink3.mk"
If your package needs another package's binaries or
libraries only for building, and if that package has a
buildlink3.mk
file available, use it:
.include "../../graphics/jpeg/buildlink3.mk"
but set
BUILDLINK_DEPMETHOD.
to make it a build dependency only. This case is rather
rare.jpeg
?=build
If your package needs binaries from another package to build,
use the TOOL_DEPENDS
definition:
TOOL_DEPENDS+= itstool-[0-9]*:../../textproc/itstool
If your package needs static libraries to link against, header
files to include, etc. from another package to build,
use the BUILD_DEPENDS
definition.
If your package needs a library with which to link and
there is no buildlink3.mk
file
available, create one. Using
DEPENDS
won't be sufficient because the
include files and libraries will be hidden from the compiler.
If your package needs some executable to be able to run
correctly and if there's no
buildlink3.mk
file, this is specified
using the DEPENDS
variable. The
print/lyx
package needs to
be able to execute the latex binary from the tex-latex-bin package
when it runs, and that is specified:
DEPENDS+= tex-latex-bin-[0-9]*:../../print/tex-latex-bin
You can use wildcards in package dependencies. Note that such wildcard dependencies are retained when creating binary packages. The dependency is checked when installing the binary package and any package which matches the pattern will be used. Wildcard dependencies should be used with care.
The “-[0-9]*” should be used instead of
“-*” to avoid potentially ambiguous matches
such as “tk-postgresql” matching a
“tk-*” DEPENDS
.
Wildcards can also be used to specify that a package will only build against a certain minimum version of a pre-requisite:
DEPENDS+= ImageMagick>=6.0:../../graphics/ImageMagick
This means that the package will build using version 6.0 of ImageMagick or newer. Such a dependency may be warranted if, for example, the command line options of an executable have changed.
If you need to depend on minimum versions of libraries, see the buildlink section of the pkgsrc guide.
For security fixes, please update the package vulnerabilities file. See Section 21.1.9, “Handling packages with security problems” for more information.
If your package needs files from another package to build,
add the relevant distribution files to
DISTFILES
, so they will be extracted
automatically. See the print/ghostscript
package for an example.
(It relies on the jpeg sources being present in source form
during the build.)
Your package may conflict with other packages a user might
already have installed on his system, e.g. if your package
installs the same set of files as another package in the pkgsrc
tree or has the same PKGNAME
.
For example, x11/libXaw3d
and x11/Xaw-Xpm
install the same shared library, thus you set in
pkgsrc/x11/libXaw3d/Makefile
:
CONFLICTS= Xaw-Xpm-[0-9]*
and in pkgsrc/x11/Xaw-Xpm/Makefile
:
CONFLICTS= libXaw3d-[0-9]*
pkg_add(1) is able to detect attempts to install packages that conflict with existing packages and abort. However, in many situations this is too late in the process. Binary package managers will not know about the conflict until they attempt to install the package after already downloading it and all its dependencies. Users may also waste time building a package and its dependencies only to find out at the end that it conflicts with another package they have installed.
To avoid these issues CONFLICTS
entries
should be added in all cases where it is known that packages conflict
with each other. These CONFLICTS
entries are
exported in pkg_summary(5) files and consumed by binary package
managers to inform users that packages cannot be installed onto
the target system.
There are several reasons why a package might be
instructed to not build under certain circumstances. If the
package builds and runs on most platforms, the exceptions
should be noted with BROKEN_ON_PLATFORM
. If
the package builds and runs on a small handful of platforms,
set BROKEN_EXCEPT_ON_PLATFORM
instead.
Both BROKEN_ON_PLATFORM
and
BROKEN_EXCEPT_ON_PLATFORM
are OS triples
(OS-version-platform) that can use glob-style
wildcards.
If a package is not appropriate for some platforms (as
opposed to merely broken), a different set of variables should be
used as this affects failure reporting and statistics.
If the package is appropriate for most platforms, the exceptions
should be noted with NOT_FOR_PLATFORM
. If
the package is appropriate for only a small handful of platforms
(often exactly one), set ONLY_FOR_PLATFORM
instead.
Both ONLY_FOR_PLATFORM
and
NOT_FOR_PLATFORM
are OS triples
(OS-version-platform) that can use glob-style
wildcards.
Some packages are tightly bound to a specific version of an
operating system, e.g. LKMs or sysutils/lsof
. Such binary packages are not
backwards compatible with other versions of the OS, and should be
uploaded to a version specific directory on the FTP server. Mark
these packages by setting OSVERSION_SPECIFIC
to
“yes”. This variable is not currently used by any of
the package system internals, but may be used in the
future.
If the package should be skipped (for example, because it
provides functionality already provided by the system), set
PKG_SKIP_REASON
to a descriptive message. If
the package should fail because some preconditions are not met,
set PKG_FAIL_REASON
to a descriptive
message.
To ensure that a package may not be deleted, once it has been
installed, the PKG_PRESERVE
definition should
be set in the package Makefile. This will be carried into any
binary package that is made from this pkgsrc entry. A
“preserved” package will
not be deleted using pkg_delete(1) unless the
“-f” option is used.
When a vulnerability is found, this should be noted in
localsrc/security/advisories/pkg-vulnerabilities
,
and after committing that file, ask pkgsrc-security@NetBSD.org to
update the file on ftp.NetBSD.org.
After fixing the vulnerability by a patch, its
PKGREVISION
should be increased (this is of
course not necessary if the problem is fixed by using a newer
release of the software), and the pattern in the
pkg-vulnerabilities file must be updated.
Also, if the fix should be applied to the stable pkgsrc branch, be sure to submit a pullup request!
Binary packages already on ftp.NetBSD.org will be handled semi-automatically by a weekly cron job.
When making fixes to an existing package it can be useful
to change the version number in PKGNAME
. To
avoid conflicting with future versions by the original author, a
“nb1”, “nb2”, ... suffix can be used
on package versions by setting PKGREVISION=1
(2, ...). The “nb” is treated like a
“.” by the package tools. e.g.
DISTNAME= foo-17.42 PKGREVISION= 9
will result in a PKGNAME
of
“foo-17.42nb9”. If you want to use the original
value of PKGNAME
without the “nbX”
suffix, e.g. for setting DIST_SUBDIR
, use
PKGNAME_NOREV
.
When a new release of the package is released, the
PKGREVISION
should be removed, e.g. on a new
minor release of the above package, things should be like:
DISTNAME= foo-17.43
PKGREVISION
should be incremented for any
non-trivial change in the resulting binary package. Without a
PKGREVISION
bump, someone with the previous
version installed has no way of knowing that their package is out
of date. Thus, changes without increasing
PKGREVISION
are essentially labeled "this is so
trivial that no reasonable person would want to upgrade", and this
is the rough test for when increasing
PKGREVISION
is appropriate. Examples of
changes that do not merit increasing
PKGREVISION
are:
Changing HOMEPAGE
,
MAINTAINER
, OWNER
, or
comments in Makefile.
Changing build variables if the resulting binary package is the same.
Changing
DESCR
.
Adding PKG_OPTIONS
if the
default options don't change.
Examples of changes that do merit an increase to
PKGREVISION
include:
Security fixes
Changes or additions to a patch file
Changes to the
PLIST
A dependency is changed or renamed.
PKGREVISION must also be incremented when dependencies have ABI changes.
When you want to replace the same text in multiple files or when the replacement text varies, patches alone cannot help. This is where the SUBST framework comes in. It provides an easy-to-use interface for replacing text in files. Example:
SUBST_CLASSES+= fix-paths SUBST_STAGE.fix-paths= pre-configure SUBST_MESSAGE.fix-paths= Fixing absolute paths. SUBST_FILES.fix-paths= src/*.c SUBST_FILES.fix-paths+= scripts/*.sh SUBST_SED.fix-paths= -e 's,"/usr/local,"${PREFIX},g' SUBST_SED.fix-paths+= -e 's,"/var/log,"${VARBASE}/log,g'
SUBST_CLASSES
is a list of identifiers
that are used to identify the different SUBST blocks that are
defined. The SUBST framework is heavily used by pkgsrc, so it is
important to always use the +=
operator with
this variable. Otherwise some substitutions may be
skipped.
The remaining variables of each SUBST block are
parameterized with the identifier from the first line
(fix-paths
in this case.) They can be seen as
parameters to a function call.
SUBST_STAGE.*
specifies the stage at
which the replacement will take place. All combinations of
pre-
, do-
and
post-
together with a phase name are
possible, though only few are actually used. Most commonly used
are post-patch
and
pre-configure
. Of these two,
pre-configure
should be preferred because
then it is possible to run bmake patch and
have the state after applying the patches but before making any
other changes. This is especially useful when you are debugging
a package in order to create new patches for it. Similarly,
post-build
is preferred over
pre-install
, because the install phase should
generally be kept as simple as possible. When you use
post-build
, you have the same files in the
working directory that will be installed later, so you can check
if the substitution has succeeded.
SUBST_MESSAGE.*
is an optional text
that is printed just before the substitution is done.
SUBST_FILES.*
is the list of shell
globbing patterns that specifies the files in which the
substitution will take place. The patterns are interpreted
relatively to the WRKSRC
directory.
SUBST_SED.*
is a list of arguments to
sed(1) that specify the actual substitution. Every sed
command should be prefixed with -e
, so that
all SUBST blocks look uniform.
There are some more variables, but they are so seldomly
used that they are only documented in the
mk/subst.mk
file.
If you need to download from a dynamic URL you can set
DYNAMIC_MASTER_SITES
and a make
fetch will call files/getsite.sh
with the name of each file to download as an argument, expecting
it to output the URL of the directory from which to download
it. graphics/ns-cult3d
is an
example of this usage.
If the download can't be automated, because the user must
submit personal information to apply for a password, or must pay
for the source, or whatever, you can set
FETCH_MESSAGE
to a list of lines that are
displayed to the user before aborting the build. Example:
FETCH_MESSAGE= "Please download the files" FETCH_MESSAGE+= " "${DISTFILES:Q} FETCH_MESSAGE+= "manually from "${MASTER_SITES:Q}"."
Sometimes authors of a software package make some modifications after the software was released, and they put up a new distfile without changing the package's version number. If a package is already in pkgsrc at that time, the checksum will no longer match. The contents of the new distfile should be compared against the old one before changing anything, to make sure the distfile was really updated on purpose, and that no trojan horse or so crept in. Please mention that the distfiles were compared and what was found in your commit message.
Then, the correct way to work around this is to set
DIST_SUBDIR
to a unique directory name, usually
based on PKGNAME_NOREV
(but take care with
python or ruby packages, where PKGNAME
includes
a variable prefix). All DISTFILES
and
PATCHFILES
for this package will be put in that
subdirectory of the local distfiles directory. (See Section 21.1.10, “How to handle incrementing versions when fixing an existing package” for more details.) In case this
happens more often, PKGNAME
can be used (thus
including the nbX
suffix) or a date stamp can
be appended, like
${PKGNAME_NOREV}-YYYYMMDD
.
DIST_SUBDIR
is also used when a distfile's
name does not contain a version and the distfile is apt to change. In
cases where the likelihood of this is very small,
DIST_SUBDIR
might not be required. Additionally,
DIST_SUBDIR
must not be removed unless the
distfile name changes, even if a package is being moved or
renamed.
Do not forget regenerating the distinfo
file
after that, since it contains the DIST_SUBDIR
path in the filenames.
Also, increase the PKGREVISION if the installed package is different.
Furthermore, a mail to the package's authors seems appropriate
telling them that changing distfiles after releases without
changing the file names is not good practice.
Helper methods exist for packages hosted on github.com which
will often have distfile names that clash with other packages, for
example 1.0.tar.gz
. Use one of the three recipes
from below:
If your distfile URL looks similar to
http://github.com/username/exampleproject/archive/v1.0.zip
,
then you are packaging a tagged release.
DISTNAME= exampleproject-1.0 MASTER_SITES= ${MASTER_SITE_GITHUB:=username/} #GITHUB_PROJECT= # can be omitted if same as DISTNAME GITHUB_TAG= v${PKGVERSION_NOREV} EXTRACT_SUFX= .zip
If your distfile URL looks similar to
http://github.com/example/example/archive/988881adc9fc3655077dc2d4d757d480b5ea0e11.tar.gz
,
then you are packaging a specific commit not tied to a
release.
DISTNAME= example-1.0 MASTER_SITES= ${MASTER_SITE_GITHUB:=example/} #GITHUB_PROJECT= # can be omitted if same as DISTNAME GITHUB_TAG= 988881adc9fc3655077dc2d4d757d480b5ea0e11
If your distfile URL looks similar to
http://github.com/username/exampleproject/releases/download/rel-1.6/offensive-1.6.zip
,
then you are packaging a release.
DISTNAME= offensive-1.6 PKGNAME= ${DISTNAME:S/offensive/proper/} MASTER_SITES= ${MASTER_SITE_GITHUB:=username/} GITHUB_PROJECT= exampleproject GITHUB_RELEASE= rel-${PKGVERSION_NOREV} # usually just set this to ${DISTNAME} EXTRACT_SUFX= .zip
pkgsrc supports many different machines, with different
object formats like a.out and ELF, and varying abilities to do
shared library and dynamic loading at all. To accompany this,
varying commands and options have to be passed to the
compiler, linker, etc. to get the Right Thing, which can be
pretty annoying especially if you don't have all the machines
at your hand to test things. The
devel/libtool
pkg
can help here, as it just “knows” how to build
both static and dynamic libraries from a set of source files,
thus being platform-independent.
Here's how to use libtool in a package in seven simple steps:
Add USE_LIBTOOL=yes
to the package
Makefile.
For library objects, use “${LIBTOOL} --mode=compile
${CC}” in place of “${CC}”. You could even
add it to the definition of CC
, if only
libraries are being built in a given Makefile. This one command
will build both PIC and non-PIC library objects, so you need not
have separate shared and non-shared library rules.
For the linking of the library, remove any “ar”, “ranlib”, and “ld -Bshareable” commands, and instead use:
${LIBTOOL} --mode=link \ ${CC} -o ${.TARGET:.a=.la} \ ${OBJS:.o=.lo} \ -rpath ${PREFIX}/lib \ -version-info major:minor
Note that the library is changed to have a
.la
extension, and the objects are
changed to have a .lo
extension. Change OBJS
as
necessary. This automatically creates all of the
.a
,
.so.major.minor
, and ELF symlinks (if
necessary) in the build directory. Be sure to include
“-version-info”, especially when major and
minor are zero, as libtool will otherwise strip off the
shared library version.
From the libtool manual:
So, libtool library versions are described by three integers: CURRENT The most recent interface number that this library implements. REVISION The implementation number of the CURRENT interface. AGE The difference between the newest and oldest interfaces that this library implements. In other words, the library implements all the interface numbers in the range from number `CURRENT - AGE' to `CURRENT'. If two libraries have identical CURRENT and AGE numbers, then the dynamic linker chooses the library with the greater REVISION number.
The “-release” option will produce different results for a.out and ELF (excluding symlinks) in only one case. An ELF library of the form “libfoo-release.so.x.y” will have a symlink of “libfoo.so.x.y” on an a.out platform. This is handled automatically.
The “-rpath argument” is the install directory of the library being built.
In the PLIST
, include only the
.la
file, the other files will be
added automatically.
When linking shared object (.so
)
files, i.e. files that are loaded via dlopen(3), NOT
shared libraries, use “-module
-avoid-version” to prevent them getting version
tacked on.
The PLIST
file gets the
foo.so
entry.
When linking programs that depend on these libraries
before they are installed, preface
the cc(1) or ld(1) line with “${LIBTOOL}
--mode=link”, and it will find the correct
libraries (static or shared), but please be aware that
libtool will not allow you to specify a relative path in
-L (such as “-L../somelib”), because it
expects you to change that argument to be the
.la
file. e.g.
${LIBTOOL} --mode=link ${CC} -o someprog -L../somelib -lsomelib
should be changed to:
${LIBTOOL} --mode=link ${CC} -osomeprog
../somelib/somelib.la
and it will do the right thing with the libraries.
When installing libraries, preface the install(1)
or cp(1) command with “${LIBTOOL}
--mode=install”, and change the library name to
.la
. e.g.
${LIBTOOL} --mode=install ${BSD_INSTALL_LIB} ${SOMELIB:.a=.la} ${PREFIX}/lib
This will install the static .a
,
shared library, any needed symlinks, and run
ldconfig(8).
In your PLIST
, include only
the .la
file (this is a change from previous behaviour).
Add USE_LIBTOOL=yes
to the
package Makefile. This will override the package's own libtool
in most cases. For older libtool using packages, libtool is
made by ltconfig script during the do-configure step; you can
check the libtool script location by doing make
configure; find work*/ -name libtool.
LIBTOOL_OVERRIDE
specifies which libtool
scripts, relative to WRKSRC
, to override. By
default, it is set to “libtool */libtool
*/*/libtool”. If this does not match the location of the
package's libtool script(s), set it as appropriate.
If you do not need *.a
static
libraries built and installed, then use
SHLIBTOOL_OVERRIDE
instead.
If your package makes use of the platform-independent library for loading dynamic shared objects, that comes with libtool (libltdl), you should include devel/libltdl/buildlink3.mk.
Some packages use libtool incorrectly so that the package may not work or build in some circumstances. Some of the more common errors are:
The inclusion of a shared object (-module) as a dependent library in an executable or library. This in itself isn't a problem if one of two things has been done:
The shared object is named correctly, i.e.
libfoo.la
, not
foo.la
The -dlopen option is used when linking an executable.
The use of libltdl without the correct calls to initialisation routines.
The function lt_dlinit() should be called and the macro
LTDL_SET_PRELOADED_SYMBOLS
included in
executables.
If a package needs GNU autoconf or automake to be executed to regenerate the configure script and Makefile.in makefile templates, then they should be executed in a pre-configure target.
For packages that need only autoconf:
AUTOCONF_REQD= 2.50 # if default version is not good enough USE_TOOLS+= autoconf # use "autoconf213" for autoconf-2.13 ... pre-configure: cd ${WRKSRC} && autoconf ...
and for packages that need automake and autoconf:
AUTOMAKE_REQD= 1.7.1 # if default version is not good enough USE_TOOLS+= automake # use "automake14" for automake-1.4 ... pre-configure: set -e; cd ${WRKSRC}; \ aclocal; autoheader; automake -a --foreign -i; autoconf ...
Packages which use GNU Automake will almost certainly require GNU Make.
There are times when the configure process makes
additional changes to the generated files, which then causes
the build process to try to re-execute the automake sequence.
This is prevented by touching various files in the configure
stage. If this causes problems with your package you can set
AUTOMAKE_OVERRIDE=NO
in the package
Makefile.
Compilers for the C, C++, and Fortran languages comes with the NetBSD base system. By default, pkgsrc assumes that a package is written in C and will hide all other compilers (via the wrapper framework, see Chapter 16, Buildlink methodology).
To declare which language's compiler a package needs, set
the USE_LANGUAGES
variable. Allowed values
currently are “c”, “c++”, and
“fortran” (and any combination). The default is
“c”. Packages using GNU configure scripts, even if
written in C++, usually need a C compiler for the configure
phase.
If a program is written in Java, use the Java framework in
pkgsrc. The package must include
../../mk/java-vm.mk
. This Makefile fragment
provides the following variables:
USE_JAVA
defines if a build
dependency on the JDK is added. If
USE_JAVA
is set to “run”, then
there is only a runtime dependency on the JDK. The default is
“yes”, which also adds a build dependency on the
JDK.
Set USE_JAVA2
to declare that
a package needs a Java2 implementation. The supported values
are “yes”, “1.4”, and
“1.5”. “yes” accepts any Java2
implementation, “1.4” insists on versions 1.4 or
above, and “1.5” only accepts versions 1.5 or
above. This variable is not set by default.
PKG_JAVA_HOME
is
automatically set to the runtime location of the used Java
implementation dependency. It may be used to set
JAVA_HOME
to a good value if the program
needs this variable to be defined.
If your package contains interpreted perl scripts, add
“perl” to the USE_TOOLS
variable
and set REPLACE_PERL
to ensure that the proper
interpreter path is set. REPLACE_PERL
should
contain a list of scripts, relative to WRKSRC
,
that you want adjusted. Every occurrence of
*/bin/perl
in a she-bang line will be
replaced with the full path to the perl executable.
If a particular version of perl is needed, set the
PERL5_REQD
variable to the version number. The
default is “5.0”.
See Section 21.6.6, “Packages installing perl modules” for information about handling perl modules.
REPLACE_SH
,
REPLACE_BASH
, REPLACE_CSH
,
and REPLACE_KSH
can be used to replace shell
hash bangs in files. Please use the appropriate one, prefering
REPLACE_SH
in case this shell is sufficient.
Each should contain a list of scripts, relative to
WRKSRC
, that you want adjusted. Every
occurrence of the matching shell in a she-bang line will be
replaced with the full path to the shell executable.
When using REPLACE_BASH
, don't forget to add
bash
to USE_TOOLS
.
The most common failures when building a package are that some platforms do not provide certain header files, functions or libraries, or they provide the functions in a library that the original package author didn't know. To work around this, you can rewrite the source code in most cases so that it does not use the missing functions or provides a replacement function.
If a package already comes with a GNU configure script, the
preferred way to fix the build failure is to change the
configure script, not the code. In the other cases, you can
utilize the C preprocessor, which defines certain macros
depending on the operating system and hardware architecture it
compiles for. These macros can be queried using for example
#if defined(__i386)
. Almost every operating
system, hardware architecture and compiler has its own macro.
For example, if the macros __GNUC__
,
__i386__
and __NetBSD__
are all defined, you know that you are using NetBSD on an i386
compatible CPU, and your compiler is GCC.
The list of the following macros for hardware and
operating system depends on the compiler that is used. For
example, if you want to conditionally compile code on Solaris,
don't use __sun__
, as the SunPro compiler
does not define it. Use __sun
instead.
To distinguish between 4.4 BSD-derived systems and the rest of the world, you should use the following code.
#include <sys/param.h> #if (defined(BSD) && BSD >= 199306) /* BSD-specific code goes here */ #else /* non-BSD-specific code goes here */ #endif
If this distinction is not fine enough, you can also test for the following macros.
Cygwin __CYGWIN__ DragonFly __DragonFly__ FreeBSD __FreeBSD__ Haiku __HAIKU__ Interix __INTERIX IRIX __sgi (TODO: get a definite source for this) Linux linux, __linux, __linux__ Mac OS X __APPLE__ MirBSD __MirBSD__ (__OpenBSD__ is also defined) Minix3 __minix NetBSD __NetBSD__ OpenBSD __OpenBSD__ Solaris sun, __sun
i386 i386, __i386, __i386__ MIPS __mips SPARC sparc, __sparc
Some source files trigger bugs in the compiler, based on combinations of compiler version and architecture and almost always relation to optimisation being enabled. Common symptoms are gcc internal errors or never finishing compiling a file.
Typically, a workaround involves testing the
MACHINE_ARCH
and compiler version, disabling
optimisation for that combination of file,
MACHINE_ARCH
and compiler.
This used to be a big problem in the past, but is rarely
needed now as compiler technology has matured. If you still need
to add a compiler specific workaround, please do so in the file
hacks.mk
and describe the symptom and
compiler version as detailed as possible.
This error message often means that a package did not link to a shared library it needs. The following functions are known to cause this error message over and over.
Function | Library | Affected platforms |
---|---|---|
accept, bind, connect | -lsocket | Solaris |
crypt | -lcrypt | DragonFly, NetBSD |
dlopen, dlsym | -ldl | Linux |
gethost* | -lnsl | Solaris |
inet_aton | -lresolv | Solaris |
nanosleep, sem_*, timer_* | -lrt | Solaris |
openpty | -lutil | Linux |
To fix these linker errors, it is often sufficient to say
LIBS.
to the package
OperatingSystem
+=
-lfoo
Makefile
and then say bmake clean;
bmake.
When you are using the SunPro compiler, there is another possibility. That compiler cannot handle the following code:
extern int extern_func(int); static inline int inline_func(int x) { return extern_func(x); } int main(void) { return 0; }
It generates the code for inline_func
even if
that function is never used. This code then refers to
extern_func
, which can usually not be resolved. To
solve this problem you can try to tell the package to disable inlining
of functions.
Sometimes packages fail to build because the compiler runs
into an operating system specific soft limit. With the
UNLIMIT_RESOURCES
variable pkgsrc can be told
to unlimit the resources. Currently, the allowed values are any combination of
“cputime”, “datasize”,
“memorysize”, and “stacksize”.
Setting this variable is similar to running the shell builtin
ulimit command to raise the maximum data
segment size or maximum stack size of a process, respectively, to
their hard limits.
The BSD-compatible install supplied
with some operating systems cannot create more than one
directory at a time. As such, you should call
${INSTALL_*_DIR}
like this:
${INSTALL_DATA_DIR} ${PREFIX}/dir1 ${INSTALL_DATA_DIR} ${PREFIX}/dir2
You can also just append “dir1
dir2
” to the
INSTALLATION_DIRS
variable, which will
automatically do the right thing.
In general, documentation should be installed into
${PREFIX}/share/doc/${PKGBASE}
or
${PREFIX}/share/doc/${PKGNAME}
(the latter
includes the version number of the package).
Many modern packages using GNU autoconf allow to set the
directory where HTML documentation is installed with the
“--with-html-dir” option. Sometimes using this flag
is needed because otherwise the documentation ends up in
${PREFIX}/share/doc/html
or other
places.
An exception to the above is that library API documentation
generated with the textproc/gtk-doc
tools, for use by special
browsers (devhelp) should be left at their default location, which
is ${PREFIX}/share/gtk-doc
. Such
documentation can be recognized from files ending in
.devhelp
or .devhelp2
.
(It is also acceptable to install such files in
${PREFIX}/share/doc/${PKGBASE}
or
${PREFIX}/share/doc/${PKGNAME}
; the
.devhelp*
file must be directly in that
directory then, no additional subdirectory level is allowed in
this case. This is usually achieved by using
“--with-html-dir=${PREFIX}/share/doc”.
${PREFIX}/share/gtk-doc
is preferred
though.)
Certain packages, most of them in the games category, install
a score file that allows all users on the system to record their
highscores. In order for this to work, the binaries need to be
installed setgid and the score files owned by the appropriate
group and/or owner (traditionally the "games" user/group). Set
USE_GAMESGROUP
to yes to support this. The
following variables, documented in more detail in
mk/defaults/mk.conf
, control this
behaviour: GAMEDATAMODE
,
GAMEDIRMODE
, GAMES_GROUP
,
GAMEMODE
, GAME_USER
.
Other useful variables are: GAMEDIR_PERMS
,
GAMEDATA_PERMS
and
SETGID_GAMES_PERMS
.
An example that illustrates some of the variables described above is
games/moon-buggy
. OWN_DIRS_PERMS
is
used to properly set directory permissions of the directory where the
scorefile is saved, REQD_FILES_PERMS
is used to create a
dummy scorefile (mbscore
) with the proper permissions
and SPECIAL_PERMS
is used to install setgid the game
binary:
USE_GAMESGROUP= yes BUILD_DEFS+= VARBASE OWN_DIRS_PERMS+= ${VARBASE}/games/moon-buggy ${GAMEDIR_PERMS} REQD_FILES_PERMS+= /dev/null ${VARBASE}/games/moon-buggy/mbscore ${GAMEDATA_PERMS} SPECIAL_PERMS+= ${PREFIX}/bin/moon-buggy ${SETGID_GAMES_PERMS}
Various INSTALL_*
variables are also available:
INSTALL_GAME
to install setgid game binaries,
INSTALL_GAME_DIR
to install game directories that are
needed to be accessed by setgid games and
INSTALL_GAME_DATA
to install scorefiles.
A package should therefore never hard code file ownership or
access permissions but rely on *_PERMS
as described above
or alternatively on INSTALL_GAME
,
INSTALL_GAME_DATA
and
INSTALL_GAME_DIR
to set these correctly.
DESTDIR
support means that a package
installs into a staging directory, not the final location of the
files. Then a binary package is created which can be used for
installation as usual. There are two ways: Either the package must
install as root (“destdir”) or the package can
install as non-root user (“user-destdir”).
PKG_DESTDIR_SUPPORT
has to be
set to “destdir” or “user-destdir”.
By default PKG_DESTDIR_SUPPORT
is set to “user-destdir” to help catching more
potential packaging problems. If bsd.prefs.mk is included in the Makefile,
PKG_DESTDIR_SUPPORT
needs to be set before
the inclusion.
All installation operations have to be prefixed with
${DESTDIR}
.
automake gets this DESTDIR mostly right automatically. Many manual rules and pre/post-install often are incorrect; fix them.
If files are installed with special owner/group
use SPECIAL_PERMS
.
In general, packages should support
UNPRIVILEGED
to be able to use
DESTDIR.
Your package may also contain scripts with hardcoded paths to
other interpreters besides (or as well as) perl. To correct the
full pathname to the script interpreter, you need to set the
following definitions in your Makefile
(we
shall use tclsh in this example):
REPLACE_INTERPRETER+= tcl REPLACE.tcl.old= .*/bin/tclsh REPLACE.tcl.new= ${PREFIX}/bin/tclsh REPLACE_FILES.tcl= # list of tcl scripts which need to be fixed, # relative to ${WRKSRC}, just as in REPLACE_PERL
Before March 2006, these variables were called
_REPLACE.*
and
_REPLACE_FILES.*
.
Makefiles of packages providing perl5 modules should include
the Makefile fragment
../../lang/perl5/module.mk
. It provides a
do-configure target for the standard perl
configuration for such modules as well as various hooks to tune
this configuration. See comments in this file for
details.
Perl5 modules will install into different places depending
on the version of perl used during the build process. To
address this, pkgsrc will append lines to the
PLIST
corresponding to the files listed in
the installed .packlist
file generated by
most perl5 modules. This is invoked by defining
PERL5_PACKLIST
to a space-separated list of
packlist files relative to PERL5_PACKLIST_DIR
(PERL5_INSTALLVENDORARCH
by default),
e.g.:
PERL5_PACKLIST= auto/Pg/.packlist
The perl5 config variables
installarchlib
,
installscript
,
installvendorbin
,
installvendorscript
,
installvendorarch
,
installvendorlib
,
installvendorman1dir
, and
installvendorman3dir
represent those
locations in which components of perl5 modules may be installed,
provided as variable with uppercase and prefixed with
PERL5_
, e.g. PERL5_INSTALLARCHLIB
and may be used by perl5 packages that don't have a packlist.
These variables are also substituted for in the
PLIST
as uppercase prefixed with
PERL5_SUB_
.
Some packages install info files or use the
“makeinfo” or “install-info”
commands. INFO_FILES
should be defined in
the package Makefile so that INSTALL
and
DEINSTALL
scripts will be generated to
handle registration of the info files in the Info directory
file. The “install-info” command used for the info
files registration is either provided by the system, or by a
special purpose package automatically added as dependency if
needed.
PKGINFODIR
is the directory under
${PREFIX}
where info files are primarily
located. PKGINFODIR
defaults to
“info” and can be overridden by the user.
The info files for the package should be listed in the
package PLIST
; however any split info files
need not be listed.
A package which needs the “makeinfo” command
at build time must add “makeinfo” to
USE_TOOLS
in its Makefile. If a minimum
version of the “makeinfo” command is needed it
should be noted with the TEXINFO_REQD
variable in the package Makefile
. By
default, a minimum version of 3.12 is required. If the system
does not provide a makeinfo command or if it
does not match the required minimum, a build dependency on the
devel/gtexinfo
package will
be added automatically.
The build and installation process of the software provided
by the package should not use the
install-info command as the registration of
info files is the task of the package
INSTALL
script, and it must use the
appropriate makeinfo command.
To achieve this goal, the pkgsrc infrastructure creates
overriding scripts for the install-info and
makeinfo commands in a directory listed early
in PATH
.
The script overriding install-info has
no effect except the logging of a message. The script overriding
makeinfo logs a message and according to the
value of TEXINFO_REQD
either runs the appropriate
makeinfo command or exit on error.
All packages that install manual pages should install them
into the same directory, so that there is one common place to look
for them. In pkgsrc, this place is
${PREFIX}/${PKGMANDIR}
, and this expression
should be used in packages. The default for
PKGMANDIR
is
“man
”. Another often-used value
is “share/man
”.
The support for a custom PKGMANDIR
is far from complete.
The PLIST
files can just use
man/
as the top level directory for the man
page file entries, and the pkgsrc framework will convert as
needed. In all other places, the correct
PKGMANDIR
must be used.
Packages that are
configured with GNU_CONFIGURE
set as
“yes”, by default will use the
./configure
--mandir switch to set where the man pages should be installed.
The path is GNU_CONFIGURE_MANDIR
which defaults
to ${PREFIX}/${PKGMANDIR}
.
Packages that use GNU_CONFIGURE
but do not
use --mandir, can set CONFIGURE_HAS_MANDIR
to “no”.
Or if the ./configure
script uses
a non-standard use of --mandir, you can set
GNU_CONFIGURE_MANDIR
as needed.
See Section 15.5, “Man page compression” for information on installation of compressed manual pages.
If a package installs .schemas
or
.entries
files, used by GConf,
you need to take some extra steps to make sure they get registered
in the database:
Include ../../devel/GConf/schemas.mk
instead of its buildlink3.mk
file. This
takes care of rebuilding the GConf database at installation and
deinstallation time, and tells the package where to install
GConf data files using some standard configure arguments. It
also disallows any access to the database directly from the
package.
Ensure that the package installs its
.schemas
files under
${PREFIX}/share/gconf/schemas
. If they get
installed under ${PREFIX}/etc
, you will
need to manually patch the package.
Check the PLIST and remove any entries under the etc/gconf directory, as they will be handled automatically. See Section 10.13, “How do I change the location of configuration files?” for more information.
Define the GCONF_SCHEMAS
variable in
your Makefile
with a list of all
.schemas
files installed by the package, if
any. Names must not contain any directories in them.
Define the GCONF_ENTRIES
variable in
your Makefile
with a
list of all .entries
files installed by the
package, if any. Names must not contain any directories in
them.
If a package installs .omf
files, used by
scrollkeeper/rarian, you need to take some extra steps to make sure they
get registered in the database:
Include
../../mk/omf-scrollkeeper.mk
instead of rarian's buildlink3.mk
file. This
takes care of rebuilding the scrollkeeper database at
installation and deinstallation time, and disallows any access
to it directly from the package.
Check the PLIST and remove any entries under the
libdata/scrollkeeper
directory, as they
will be handled automatically.
Remove the share/omf
directory from
the PLIST. It will be handled by rarian. (make
print-PLIST does this automatically.)
If a package installs font files, you will need to rebuild the fonts database in the directory where they get installed at installation and deinstallation time. This can be automatically done by using the pkginstall framework.
You can list the directories where fonts are installed in the
FONTS_DIRS.
variables, where type
type
can be one of
“ttf”, “type1” or “x11”.
Also make sure that the database file
fonts.dir
is not listed in the PLIST.
Note that you should not create new directories for fonts; instead use the standard ones to avoid that the user needs to manually configure his X server to find them.
If a package installs GTK2 immodules or loaders, you need to take some extra steps to get them registered in the GTK2 database properly:
Include
../../x11/gtk2/modules.mk
instead of its
buildlink3.mk
file. This takes care of
rebuilding the database at installation and deinstallation time.
Set GTK2_IMMODULES=YES
if
your package installs GTK2 immodules.
Set GTK2_LOADERS=YES
if your package installs
GTK2 loaders.
Patch the package to not touch any of the GTK2 databases directly. These are:
libdata/gtk-2.0/gdk-pixbuf.loaders
libdata/gtk-2.0/gtk.immodules
Check the PLIST
and remove
any entries under the libdata/gtk-2.0
directory, as they will be handled automatically.
If a package installs SGML or XML data files that need to be registered in system-wide catalogs (like DTDs, sub-catalogs, etc.), you need to take some extra steps:
Include
../../textproc/xmlcatmgr/catalogs.mk
in
your Makefile
, which takes care of
registering those files in system-wide catalogs at
installation and deinstallation time.
Set SGML_CATALOGS
to the full path of
any SGML catalogs installed by the package.
Set XML_CATALOGS
to the full path of
any XML catalogs installed by the package.
Set SGML_ENTRIES
to individual entries
to be added to the SGML catalog. These come in groups of
three strings; see xmlcatmgr(1) for more information
(specifically, arguments recognized by the 'add' action).
Note that you will normally not use this variable.
Set XML_ENTRIES
to individual entries
to be added to the XML catalog. These come in groups of three
strings; see xmlcatmgr(1) for more information (specifically,
arguments recognized by the 'add' action). Note that you will
normally not use this variable.
If a package provides extensions to the MIME database by
installing .xml
files inside
${PREFIX}/share/mime/packages
, you
need to take some extra steps to ensure that the database is kept
consistent with respect to these new files:
Include
../../databases/shared-mime-info/mimedb.mk
(avoid using the buildlink3.mk
file from
this same directory, which is reserved for inclusion from
other buildlink3.mk
files). It takes
care of rebuilding the MIME database at installation and
deinstallation time, and disallows any access to it directly
from the package.
Check the PLIST and remove any entries under the
share/mime
directory,
except for files saved under
share/mime/packages
. The former are
handled automatically by
the update-mime-database program, but the latter are
package-dependent and must be removed by the package that
installed them in the first place.
Remove any share/mime/*
directories
from the PLIST. They will be handled by the shared-mime-info
package.
If a package uses intltool during its build, add
intltool
to the USE_TOOLS
,
which forces it to use the intltool package provided by pkgsrc,
instead of the one bundled with the distribution file.
This tracks intltool's build-time dependencies and uses the latest available version; this way, the package benefits of any bug fixes that may have appeared since it was released.
If a package contains a rc.d script, it won't be copied into
the startup directory by default, but you can enable it, by adding
the option PKG_RCD_SCRIPTS=YES
in
mk.conf
. This option will copy the scripts
into /etc/rc.d
when a package is installed, and
it will automatically remove the scripts when the package is
deinstalled.
If a package installs TeX packages into the texmf tree,
the ls-R
database of the tree needs to be
updated.
Except the main TeX packages such as kpathsea,
packages should install files
into ${PREFIX}/share/texmf-dist
,
not ${PREFIX}/share/texmf
.
Include
../../print/kpathsea/texmf.mk
. This
takes care of rebuilding the ls-R
database at installation and deinstallation time.
If your package installs files into a texmf
tree other than the one
at ${PREFIX}/share/texmf-dist
,
set TEX_TEXMF_DIRS
to the list of all texmf
trees that need database update.
If your package also installs font map files that need
to be registered using updmap,
include ../../print/tex-tetex/map.mk
and
set TEX_MAP_FILES
and/or
TEX_MIXEDMAP_FILES
to the list of all
such font map files. Then updmap will
be run automatically at installation/deinstallation to
enable/disable font map files for TeX output
drivers.
Make sure that none of ls-R
databases are included in PLIST
, as
they will be removed only by the kpathsea package.
There are some packages that provide libraries and executables for running binaries from a one operating system on a different one (if the latter supports it). One example is running Linux binaries on NetBSD.
The pkgtools/rpm2pkg
helps in extracting and packaging Linux rpm packages.
The CHECK_SHLIBS
can be set to no to
avoid the check-shlibs target, which tests
if all libraries for each installed executable can be found by
the dynamic linker. Since the standard dynamic linker is run,
this fails for emulation packages, because the libraries used
by the emulation are not in the standard directories.
If a package installs images under the
share/icons/hicolor
and/or updates the
share/icons/hicolor/icon-theme.cache
database, you need to take some extra steps to make sure that the
shared theme directory is handled appropriately and that the cache
database is rebuilt:
Include
../../graphics/hicolor-icon-theme/buildlink3.mk
.
Check the PLIST
and remove the
entry that refers to the theme cache.
Ensure that the PLIST does not remove the shared icon
directories from the share/icons/hicolor
hierarchy because they will be handled automatically.
The best way to verify that the PLIST is correct with respect to the last two points is to regenerate it using make print-PLIST.
If a package installs .desktop
files
under share/applications
and these include
MIME information (MimeType key), you need to take extra steps to
ensure that they are registered into the MIME database:
Include
../../sysutils/desktop-file-utils/desktopdb.mk
.
Check the PLIST and remove the entry that refers to the
share/applications/mimeinfo.cache
file.
It will be handled automatically.
The best way to verify that the PLIST is correct with respect to the last point is to regenerate it using make print-PLIST.
In some cases one does not have the time to solve a problem
immediately. In this case, one can plainly mark a package as broken. For
this, one just sets the variable BROKEN
to the
reason why the package is broken (similar to the
PKG_FAIL_REASON
variable). A user trying to build
the package will immediately be shown this message, and the build
will not be even tried.
BROKEN
packages are removed from pkgsrc in irregular
intervals.
To check out all the gotchas when building a package, here are the steps that I do in order to get a package working. Please note this is basically the same as what was explained in the previous sections, only with some debugging aids.
Be sure to set PKG_DEVELOPER=yes
in mk.conf
.
Install pkgtools/url2pkg
,
create a directory for a new package, change into it, then run
url2pkg:
%
mkdir /usr/pkgsrc/
category
/examplepkg
%
cd /usr/pkgsrc/
category
/examplepkg
%
url2pkg http://www.example.com/path/to/distfile.tar.gz
Edit the Makefile
as requested.
Fill in the DESCR
file
Run make configure
Add any dependencies glimpsed from documentation and the
configure step to the package's
Makefile
.
Make the package compile, doing multiple rounds of
%
make
%
pkgvi ${WRKSRC}/some/file/that/does/not/compile
%
mkpatches
%
patchdiff
%
mv ${WRKDIR}/.newpatches/* patches
%
make mps
%
make clean
Doing this step as non-root user will ensure that no files
are modified that shouldn't be, especially during the build
phase. mkpatches,
patchdiff and pkgvi are
from the pkgtools/pkgdiff
package.
Look at the Makefile
, fix if
necessary; see Section 13.1, “Makefile
”.
Generate a PLIST
:
#
make install
#
make print-PLIST >PLIST
#
make deinstall
#
make install
#
make deinstall
You usually need to be root
to do
this. Look if there are any files left:
#
make print-PLIST
If this reveals any files that are missing in
PLIST
, add them.
Now that the PLIST
is OK, install the
package again and make a binary package:
#
make reinstall
#
make package
Delete the installed package:
#
pkg_delete
examplepkg
Repeat the above make print-PLIST command, which shouldn't find anything now:
#
make print-PLIST
Reinstall the binary package:
#
pkg_add .../
examplepkg
.tgz
Play with it. Make sure everything works.
Run pkglint from pkgtools/pkglint
, and fix the problems it
reports:
#
pkglint
Submit (or commit, if you have cvs access); see Chapter 23, Submitting and Committing.
Table of Contents
Our policy is that we accept binaries only from pkgsrc developers to guarantee that the packages don't contain any trojan horses etc. This is not to annoy anyone but rather to protect our users! You're still free to put up your home-made binary packages and tell the world where to get them. NetBSD developers doing bulk builds and wanting to upload them please see Chapter 8, Creating binary packages for everything in pkgsrc (bulk builds).
First, check that your package is complete, compiles and
runs well; see Chapter 22, Debugging and the rest of this
document. Next, generate an uuencoded gzipped tar(1)
archive that contains all files that make up the package.
Finally, send this package to the pkgsrc bug tracking system,
either with the send-pr(1) command, or if you don't have
that, go to the web page
http://www.NetBSD.org/support/send-pr.html,
which contains some instructions and a link to a form where you
can submit packages. The
sysutils/gtk-send-pr
package is
also available as a substitute for either of the above two tools.
In the form of the problem report, the category should be “pkg”, the synopsis should include the package name and version number, and the description field should contain a short description of your package (contents of the COMMENT variable or DESCR file are OK). The uuencoded package data should go into the “fix” field.
If you want to submit several packages, please send a separate PR for each one, it's easier for us to track things that way.
Alternatively, you can also import new packages into pkgsrc-wip (“pkgsrc work-in-progress”); see the homepage at http://pkgsrc.org/wip/ for details.
Please note all package additions, updates, moves, and
removals in pkgsrc/doc/CHANGES-
. It's very
important to keep this file up to date and conforming to the
existing format, because it will be used by scripts to
automatically update pages on www.NetBSD.org and other
sites. Additionally, check the
YYYY
pkgsrc/doc/TODO
file and remove the entry
for the package you updated or removed, in case it was mentioned
there.
When the PKGREVISION
of a package is
bumped, the change should appear in
pkgsrc/doc/CHANGES-
if it is security
related or otherwise relevant. Mass bumps that result from a
dependency being updated should not be mentioned. In all other
cases it's the developer's decision.YYYY
There is a make target that helps in creating proper
CHANGES-
entries: make
changes-entry. It uses the optional YYYY
CTYPE
and NETBSD_LOGIN_NAME
variables. The general
usage is to first make sure that your CHANGES-
file is up-to-date (to avoid having to resolve conflicts later-on)
and then to cd to the package directory. For
package updates, make changes-entry is enough.
For new packages, or package moves or removals, set the
YYYY
CTYPE
variable on the command line to "Added",
"Moved", or "Removed". You can set NETBSD_LOGIN_NAME
in mk.conf
if your local login name is
not the same as your NetBSD login name. The target also automatically
removes possibly existing entries for the package in the
TODO
file. Don't forget to commit
the changes, e.g. by using make commit-changes-entry!
If you are not using a checkout directly from cvs.NetBSD.org, but e.g.
a local copy of the repository, you can set USE_NETBSD_REPO=yes. This
makes the cvs commands use the main repository.
For several years, there have been mirrors of pkgsrc in fossil, git, and hg. Standard practise when using these tools is to make the first line of a commit message function as a summary that can be read without the rest, such as is commonly done with "git log --oneline". For this reason, we have the following guidelines for pkgsrc commit messages:
Start the commit message with a line that explains the big picture in 65 characters or less. When a commit is for one package, include the name of the package. For updates, include the version to which it is updated.
Leave the next line empty.
Then come the details for the commit (changes in that package, reason for a change) and any relevant PRs. Wrap this section.
Here is an example:
libxslt: update to 1.0.30 Changes since 1.0.29: ...
Here is another example:
mk/bsd.pkg.mk: enable SSP by default on NetBSD (rationale)
Commit messages are final: no “cvs admin” is allowed on the pkgsrc repository to change commit messages.
This section is only of interest for pkgsrc developers with write access to the pkgsrc repository.
When the package is finished, “cvs add” the files.
Start by adding the directory and then files in the directory. Don't
forget to add the new package to the category's
Makefile
. Make sure you don't forget any files;
you can check by running “cvs status”. An example:
$
cd .../pkgsrc/category$
cvs add pkgname$
cd pkgname$
cvs add DESCR Makefile PLIST distinfo buildlink3.mk patches$
cvs add patches/p*$
cvs status | less$
cvs commit$
cd ..$
vi Makefile # add SUBDIRS+=pkgname line$
cvs commit Makefile$
cd pkgname$
make CTYPE=Added commit-changes-entry
The commit message of the initial import should include part of the
DESCR
file, so people reading the mailing lists know
what the package is/does.
Also mention the new package in
pkgsrc/doc/CHANGES-20xx
.
Previously, “cvs import” was suggested, but it was much easier to get wrong than “cvs add”.
Please always put a concise, appropriate and relevant summary of the changes between old and new versions into the commit log when updating a package. There are various reasons for this:
A URL is volatile, and can change over time. It may go away completely or its information may be overwritten by newer information.
Having the change information between old and new versions in our CVS repository is very useful for people who use either cvs or anoncvs.
Having the change information between old and new versions in our CVS repository is very useful for people who read the pkgsrc-changes mailing list, so that they can make tactical decisions about when to upgrade the package.
Please also recognize that, just because a new version of a package has been released, it should not automatically be upgraded in the CVS repository. We prefer to be conservative in the packages that are included in pkgsrc - development or beta packages are not really the best thing for most places in which pkgsrc is used. Please use your judgement about what should go into pkgsrc, and bear in mind that stability is to be preferred above new and possibly untested features.
Renaming packages is not recommended.
When renaming packages, be sure to fix any references to old name in other Makefiles, options, buildlink files, etc.
Also when renaming a package, please add
the package name and version pattern(s) of the previous package
to SUPERSEDES
.
This may be repeated for multiple renames.
The new package would be an exact replacement.
Example:
SUPERSEDES+= p5-IO-Compress-Zlib<2.017 SUPERSEDES+= optcomp-[0-9]*
Note that “successor” in the
CHANGES-YYYY
file doesn't necessarily
mean that it supersedes, as that successor may
not be an exact replacement but is a suggestion for the replaced
functionality.
It is preferred that packages are not renamed or moved, but if needed please follow these steps.
Make a copy of the directory somewhere else.
Remove all CVS dirs.
Alternatively to the first two steps you can also do:
%
cvs -d user@cvs.NetBSD.org:/cvsroot export -D today pkgsrc/category/package
and use that for further work.
Fix CATEGORIES
and any
DEPENDS
paths that just did “../package”
instead of “../../category/package”.
In the modified package's Makefile, consider setting
PREV_PKGPATH
to the previous category/package
pathname. The PREV_PKGPATH
can be used by tools
for doing an update using pkgsrc building; for example, it can
search the pkg_summary(5) database for PREV_PKGPATH
(if no SUPERSEDES
) and then use the corresponding
new PKGPATH
for that moved package. Note that
it may have multiple matches, so the tool should also check on the
PKGBASE
too. The PREV_PKGPATH
probably has no value unless SUPERSEDES
is not
set, i.e. PKGBASE
stays the same.
cvs import the modified package in the new place.
Check if any package depends on it:
%
cd /usr/pkgsrc
%
grep /package */*/Makefile* */*/buildlink*
Fix paths in packages from step 5 to point to new location.
cvs rm (-f) the package at the old location.
Remove from oldcategory/Makefile
.
Add to newcategory/Makefile
.
Commit the changed and removed files:
%
cvs commit oldcategory/package oldcategory/Makefile newcategory/Makefile
(and any packages from step 5, of course).
This section contains the answers to questions that may
arise when you are writing a package. If you don't find your
question answered here, first have a look in the other chapters,
and if you still don't have the answer, ask on the
pkgsrc-users
mailing list.
24.1. |
What is the difference between
|
|
|
24.2. |
What is the difference between
|
|
|
24.3. |
What is the difference between
|
|
|
24.4. |
What is the difference between
|
[FIXME] |
|
24.5. |
Why does make show-var
VARNAME=BUILDLINK_PREFIX. |
For optimization reasons, some variables are only available in the “wrapper” phase and later. To “simulate” the wrapper phase, append PKG_PHASE=wrapper to the above command. |
|
24.6. |
What does
|
The |
|
24.7. |
Which mailing lists are there for package developers? |
|
|
24.8. |
Where is the pkgsrc documentation? |
There are many places where you can find documentation about pkgsrc:
|
|
24.9. |
I have a little time to kill. What shall I do? |
This is not really an FAQ yet, but here's the answer anyway.
|
Table of Contents
Quoting GNOME's web site:
The GNOME project provides two things: The GNOME desktop environment, an intuitive and attractive desktop for users, and the GNOME development platform, an extensive framework for building applications that integrate into the rest of the desktop.
pkgsrc provides a seamless way to automatically build and install a complete GNOME environment under many different platforms. We can say with confidence that pkgsrc is one of the most advanced build and packaging systems for GNOME due to its included technologies buildlink3, the wrappers and tools framework and automatic configuration file management. Lots of efforts are put into achieving a completely clean deinstallation of installed software components.
Given that pkgsrc is NetBSD's official packaging system, the above also means that great efforts are put into making GNOME work under this operating system. Recently, DragonFly BSD also adopted pkgsrc as its preferred packaging system, contributing lots of portability fixes to make GNOME build and install under it.
This chapter is aimed at pkgsrc developers and other people interested in helping our GNOME porting and packaging efforts. It provides instructions on how to manage the existing packages and some important information regarding their internals.
Should you have some spare cycles to devote to NetBSD, pkgsrc and GNOME and are willing to learn new exciting stuff, please jump straight to the pending work list! There is still a long way to go to get a fully-functional GNOME desktop under NetBSD and we need your help to achieve it!
pkgsrc includes three GNOME-related meta packages:
meta-pkgs/gnome-base
: Provides
the core GNOME desktop environment. It only includes the necessary
bits to get it to boot correctly, although it may lack important
functionality for daily operation. The idea behind this package is
to let end users build their own configurations on top of this one,
first installing this meta package to achieve a functional setup and
then adding individual applications.
meta-pkgs/gnome
: Provides a
complete installation of the GNOME platform and desktop as defined
by the GNOME project; this is based on the components distributed in
the platform/x.y/x.y.z/sources
and
desktop/x.y/x.y.z/sources
directories of the
official FTP server. Developer-only tools found in those
directories are not installed unless required by some other
component to work properly. Similarly, packages from the bindings
set (bindings/x.y/x.y.z/sources
) are not pulled
in unless required as a dependency for an end-user component. This
package "extends" meta-pkgs/gnome-base
.
meta-pkgs/gnome-devel
:
Installs all the tools required to build a GNOME component when
fetched from the CVS repository. These are required to let the
autogen.sh scripts work appropriately.
In all these packages, the DEPENDS
lines are
sorted in a way that eases updates: a package may depend on other
packages listed before it but not on any listed after it. It is very
important to keep this order to ease updates so... do not
change it to alphabetical sorting!
Almost all GNOME applications are written in C and use a common set of tools as their build system. Things get different with the new bindings to other languages (such as Python), but the following will give you a general idea on the minimum required tools:
Almost all GNOME applications use the GNU Autotools as their build system. As a general rule you will need to tell this to your package:
GNU_CONFIGURE=yes USE_LIBTOOL=yes USE_TOOLS+=gmake
If the package uses pkg-config to detect dependencies, add this tool to the list of required utilities:
USE_TOOLS+=pkg-config
Also use pkgtools/verifypc
at
the end of the build process to ensure that you did not miss to
specify any dependency in your package and that the version
requirements are all correct.
If the package uses intltool, be sure to add
intltool
to the USE_TOOLS
to handle dependencies and to force the package to use the latest
available version.
If the package uses gtk-doc (a documentation generation utility), do not add a dependency on it. The tool is rather big and the distfile should come with pregenerated documentation anyway; if it does not, it is a bug that you ought to report. For such packages you should disable gtk-doc (unless it is the default):
CONFIGURE_ARGS+=--disable-gtk-doc
The default location of installed HTML files
(share/gtk-doc/<package-name>
) is correct
and should not be changed unless the package insists on installing
them somewhere else. Otherwise programs as
devhelp will not be able to open them. You can
do that with an entry similar to:
CONFIGURE_ARGS+=--with-html-dir=${PREFIX}/share/gtk-doc/...
GNOME uses multiple shared directories and
files under the installation prefix to maintain databases. In this
context, shared means that those exact same directories and files are
used among several different packages, leading to conflicts in the
PLIST
. pkgsrc currently includes functionality to
handle the most common cases, so you have to forget about using
@unexec ${RMDIR}
lines in your file lists and
omitting shared files from them. If you find yourself doing those,
your package is most likely incorrect.
The following table lists the common situations that result in using shared directories or files. For each of them, the appropriate solution is given. After applying the solution be sure to regenerate the package's file list with make print-PLIST and ensure it is correct.
Table 25.1. PLIST handling for GNOME packages
If the package... | Then... |
---|---|
Installs OMF files under share/omf . |
See Section 21.6.10, “Packages installing scrollkeeper/rarian data files”. |
Installs icons under the
share/icons/hicolor hierarchy or updates
share/icons/hicolor/icon-theme.cache . |
See Section 21.6.19, “Packages installing hicolor theme icons”. |
Installs files under
share/mime/packages . |
See Section 21.6.14, “Packages installing extensions to the MIME database”. |
Installs .desktop files under
share/applications and these include MIME
information. |
See Section 21.6.20, “Packages installing desktop files”. |
When seeing GNOME as a whole, there are two kinds of updates:
Given that there is still a very long way for GNOME 3 (if it
ever appears), we consider a major update one that goes from a
2.X
version to a 2.Y
one,
where Y
is even and greater than
X
. These are hard to achieve because they
introduce lots of changes in the components' code and almost all
GNOME distfiles are updated to newer versions. Some of them can
even break API and ABI compatibility with the previous major
version series. As a result, the update needs to be done all at
once to minimize breakage.
A major update typically consists of around 80 package updates and the addition of some new ones.
We consider a minor update one that goes from a
2.A.X
version to a 2.A.Y
one where Y
is greater than
X
. These are easy to achieve because they do
not update all GNOME components, can be done in an incremental way
and do not break API nor ABI compatibility.
A minor update typically consists of around 50 package updates, although the numbers here may vary a lot.
In order to update the GNOME components in pkgsrc to a new stable release (either major or minor), the following steps should be followed:
Get a list of all the tarballs that form the new release by
using the following commands. These will leave the full list of the
components' distfiles into the list.txt
file:
%
echo ls "*.tar.bz2" | \ ftp -V ftp://ftp.gnome.org/pub/gnome/platform/x.y/x.y.z/sources/ | \ awk '{ print $9 }' >list.txt
%
echo ls "*.tar.bz2" | \ ftp -V ftp://ftp.gnome.org/pub/gnome/desktop/x.y/x.y.z/sources/ | \ awk '{ print $9 }' >>list.txt
Open each meta package's Makefile
and
bump their version to the release you are updating them to. The
three meta packages should be always consistent with versioning.
Obviously remove any PKGREVISION
s that might be
in them.
For each meta package, update all its
DEPENDS
lines to match the latest versions as
shown by the above commands. Do not list any
newer version (even if found in the FTP) because the meta packages
are supposed to list the exact versions that form a specific GNOME
release. Exceptions are permitted here if a newer version solves a
serious issue in the overall desktop experience; these typically
come in the form of a revision bump in pkgsrc, not in newer versions
from the developers.
Packages not listed in the list.txt
file
should be updated to the latest version available (if found in
pkgsrc). This is the case, for example, of the dependencies on the
GNU Autotools in the meta-pkgs/gnome-devel
meta package.
Generate a patch from the modified meta packages and extract the list of "new" lines. This will provide you an outline on what packages need to be updated in pkgsrc and in what order:
%
cvs diff -u gnome-devel gnome-base gnome | grep '^+D' >todo.txt
For major desktop updates it is recommended to zap all your installed packages and start over from scratch at this point.
Now comes the longest step by far: iterate over the contents
of todo.txt
and update the packages listed in
it in order. For major desktop updates none of these should be
committed until the entire set is completed because there are chances
of breaking not-yet-updated packages.
Once the packages are up to date and working, commit them to
the tree one by one with appropriate log messages. At the end,
commit the three meta package updates and all the corresponding
changes to the doc/CHANGES-<YEAR>
and
pkgsrc/doc/TODO
files.
GNOME is a very big component in pkgsrc which approaches 100 packages. Please, it is very important that you always, always, always feed back any portability fixes you do to a GNOME package to the mainstream developers (see Section 13.3.5, “Feedback to the author”). This is the only way to get their attention on portability issues and to ensure that future versions can be built out-of-the box on NetBSD. The less custom patches in pkgsrc, the easier further updates are. Those developers in charge of issuing major GNOME updates will be grateful if you do that.
The most common places to report bugs are the GNOME's Bugzilla and the freedesktop.org's Bugzilla. Not all components use these to track bugs, but most of them do. Do not be short on your reports: always provide detailed explanations of the current failure, how it can be improved to achieve maximum portability and, if at all possible, provide a patch against CVS head. The more verbose you are, the higher chances of your patch being accepted.
Also, please avoid using preprocessor magic to fix portability
issues. While the FreeBSD GNOME people are doing a great job in porting
GNOME to their operating system, the official GNOME sources are now
plagued by conditionals that check for __FreeBSD__
and similar macros. This hurts portability. Please see our patching
guidelines (Section 13.3.4, “Patching guidelines”) for more
details.
This part of the guide deals with everything from the infrastructure that is behind the interfaces described in the developer's guide. A casual package maintainer should not need anything from this part.
Table of Contents
Table of Contents
The pkgsrc infrastructure consists of many small Makefile fragments. Each such fragment needs a properly specified interface. This chapter explains how such an interface looks like.
Whenever a variable is defined in the pkgsrc infrastructure, the location and the way of definition provide much information about the intended use of that variable. Additionally, more documentation may be found in a header comment or in this pkgsrc guide.
A special file is
mk/defaults/mk.conf
, which lists all
variables that are intended to be user-defined. They are either
defined using the ?=
operator or they are
left undefined because defining them to anything would
effectively mean “yes”. All these variables may be
overridden by the pkgsrc user in the MAKECONF
file.
Outside this file, the following conventions apply:
Variables that are defined using the ?=
operator may be overridden by a package.
Variables that are defined using the =
operator may be used read-only at run-time.
Variables whose name starts with an underscore must not be accessed outside the pkgsrc infrastructure at all. They may change without further notice.
These conventions are currently not applied consistently to the complete pkgsrc infrastructure.
All variables that contain lists of things should default
to being empty. Two examples that do not follow this rule are
USE_LANGUAGES
and
DISTFILES
. These variables cannot simply be
modified using the +=
operator in package
Makefile
s (or other files included by
them), since there is no guarantee whether the variable is
already set or not, and what its value is. In the case of
DISTFILES
, the packages “know”
the default value and just define it as in the following
example.
DISTFILES= ${DISTNAME}${EXTRACT_SUFX} additional-files.tar.gz
Because of the selection of this default value, the same
value appears in many package Makefiles. Similarly for
USE_LANGUAGES
, but in this case the default
value (“c
”) is so short that it
doesn't stand out. Nevertheless it is mentioned in many
files.
Variable evaluation takes place either at load time or at runtime, depending on the context in which they occur. The contexts where variables are evaluated at load time are:
The right hand side of the :=
and !=
operators,
Make directives like .if
or
.for
,
Dependency lines.
A special exception are references to the iteration
variables of .for
loops, which are expanded
inline, no matter in which context they appear.
As the values of variables may change during load time,
care must be taken not to evaluate them by accident. Typical
examples for variables that should not be evaluated at load time
are DEPENDS
and
CONFIGURE_ARGS
. To make the effect more
clear, here is an example:
CONFIGURE_ARGS= # none CFLAGS= -O CONFIGURE_ARGS+= CFLAGS=${CFLAGS:Q} CONFIGURE_ARGS:= ${CONFIGURE_ARGS} CFLAGS+= -Wall
This code shows how the use of the :=
operator can quickly lead to unexpected results. The first
paragraph is fairly common code. The second paragraph evaluates
the CONFIGURE_ARGS
variable, which results in
CFLAGS=-O
. In the third paragraph, the
-Wall
is appended to the
CFLAGS
, but this addition will not appear in
CONFIGURE_ARGS
. In actual code, the three
paragraphs from above typically occur in completely unrelated
files.
There are many ways in which the definition and use of a
variable can be restricted in order to detect bugs and violations
of the (mostly unwritten) policies. A package can be checked with
pkglint -Wall
to see whether it meets these
rules.
Most of the .mk
files fall into one
of the following classes. Cases where a file falls into more
than one class should be avoided as it often leads to subtle
bugs.
In a traditional imperative programming language some of
the .mk
files could be described as
procedures. They take some input parameters and—after
inclusion—provide a result in output parameters. Since all
variables in Makefile
s have global scope
care must be taken not to use parameter names that have already
another meaning. For example, PKGNAME
is a
bad choice for a parameter name.
Procedures are completely evaluated at preprocessing time.
That is, when calling a procedure all input parameters must be
completely resolvable. For example,
CONFIGURE_ARGS
should never be an input
parameter since it is very likely that further text will be
added after calling the procedure, which would effectively apply
the procedure to only a part of the variable. Also, references
to other variables will be modified after calling the
procedure.
A procedure can declare its output parameters either as suitable for use in preprocessing directives or as only available at runtime. The latter alternative is for variables that contain references to other runtime variables.
Procedures shall be written such that it is possible to call the procedure more than once. That is, the file must not contain multiple-inclusion guards.
Examples for procedures are
mk/bsd.options.mk
and
mk/buildlink3/bsd.builtin.mk
. To express
that the parameters are evaluated at load time, they should be
assigned using the :=
operator, which should
be used only for this purpose.
Action files take some input parameters and may define runtime variables. They shall not define loadtime variables. There are action files that are included implicitly by the pkgsrc infrastructure, while other must be included explicitly.
An example for action files is
mk/subst.mk
.
Package Makefile
s usually consist of
a set of variable definitions, and include the file
../../mk/bsd.pkg.mk
in the very last line.
Before that, they may also include various other
*.mk
files if they need to query the
availability of certain features like the type of compiler or
the X11 implementation. Due to the heavy use of preprocessor
directives like .if
and
.for
, the order in which the files are loaded
matters.
This section describes at which point the various files are loaded and gives reasons for that order.
The very first action in bsd.prefs.mk
is to define some essential variables like
OPSYS
, OS_VERSION
and
MACHINE_ARCH
.
Then, the user settings are loaded from the file specified
in MAKECONF
, which is usually mk.conf
.
After that, those variables
that have not been overridden by the user are loaded from
mk/defaults/mk.conf
.
After the user settings, the system settings and platform settings are loaded, which may override the user settings.
Then, the tool definitions are loaded. The tool wrappers are not yet in effect. This only happens when building a package, so the proper variables must be used instead of the direct tool names.
As the last steps, some essential variables from the wrapper and the package system flavor are loaded, as well as the variables that have been cached in earlier phases of a package build.
First, bsd.prefs.mk
is loaded.
Then, the various *-vars.mk
files are
loaded, which fill default values for those variables that have
not been defined by the package. These variables may later
be used even in unrelated files.
Then, the file bsd.pkg.error.mk
provides the target error-check
that is added
as a special dependency to all other targets that use
DELAYED_ERROR_MSG
or
DELAYED_WARNING_MSG
.
Then, the package-specific hacks from
hacks.mk
are included.
Then, various other files follow. Most of them don't have any dependencies on what they need to have included before or after them, though some do.
The code to check PKG_FAIL_REASON
and
PKG_SKIP_REASON
is then executed, which
restricts the use of these variables to all the files that have
been included before. Appearances in later files will be
silently ignored.
Then, the files for the main targets are included, in the order of later execution, though the actual order should not matter.
At last, some more files are included that don't set any interesting variables but rather just define make targets to be executed.
Table of Contents
The pkgsrc infrastructure consists of a large codebase, and there are many corners where every little bit of a file is well thought out, making pkgsrc likely to fail as soon as anything is changed near those parts. To prevent most changes from breaking anything, a suite of regression tests should go along with every important part of the pkgsrc infrastructure. This chapter describes how regression tests work in pkgsrc and how you can add new tests.
You first need to install the pkgtools/pkg_regress
package, which
provides the pkg_regress command. Then you
can simply run that command, which will run all tests in the
regress/
directory.
Every directory in the regress/
directory that contains a file called spec
is considered a regression test. This file is a shell program
that is included by the pkg_regress command.
The following functions can be overridden to suit your
needs.
These functions do not take any parameters. Although they are called in “set -e” mode, they don't stop at the first failing command. See this Stack Overflow question for details.
do_setup
This function prepares the environment for the test. By default it does nothing.
do_test
This function runs the actual test. By default,
it calls TEST_MAKE
with the arguments
MAKEARGS_TEST
and writes its output including
error messages into the file
TEST_OUTFILE
.
When defining this function, make sure that all output that needs to be checked is written to the correct output file. Example:
do_test() { echo "Example output" } 1>$TEST_OUTFILE 2>&1
check_result
This function is run after the test and is typically used to compare the actual output from the one that is expected. It can make use of the various helper functions from the next section. Example:
check_result() { exit_status 0 output_require "Example" output_require "^[[:alpha:]+[[:space:]][[:alpha:]]{6}$" output_prohibit "no such file or directory" regress_fail "expected $expected but got $actual for input $input" }
do_cleanup
This function cleans everything up after the test has been run. By default it does nothing.
regress_fail message...
This function makes the test fail with the given error message.
exit_status expected
This function compares the exitcode of the do_test function with its first parameter. If they differ, the test will fail.
output_require regex...
This function checks for each of its parameters if the output from do_test matches the extended regular expression. If it does not, the test will fail. Example:
output_require "looks fine" output_require "^[[:alpha:]+[[:space:]][[:alpha:]]{6}$"
output_prohibit(regex...)
This function checks for each of its parameters if the output from do_test() does not match the extended regular expression. If any of the regular expressions matches, the test will fail.
Table of Contents
The pkgsrc system has already been ported to many operating systems, hardware architectures and compilers. This chapter explains the necessary steps to make pkgsrc even more portable.
To port pkgsrc to a new operating system (called
MyOS
in this example), you need to touch the
following files:
pkgtools/bootstrap-mk-files/files/mods/MyOS
.sys.mk
This file contains some basic definitions, for example the name of the C compiler.
mk/bsd.prefs.mk
Insert code that defines the variables
OPSYS
, OS_VERSION
,
LOWER_OS_VERSION
,
LOWER_VENDOR
,
MACHINE_ARCH
, OBJECT_FMT
,
APPEND_ELF
, and the other variables that
appear in this file.
mk/platform/MyOS
.mk
This file contains the platform-specific definitions that are used by pkgsrc. Start by copying one of the other files and edit it to your needs.
mk/tools/tools.MyOS
.mk
This file defines the paths to all the tools that are needed by one or the other package in pkgsrc, as well as by pkgsrc itself. Find out where these tools are on your platform and add them.
Now, you should be able to build some basic packages, like
lang/perl5
, shells/bash
.
Table of Contents
We checked to find a piece of software that wasn't in the packages collection, and picked GNU bison. Quite why someone would want to have bison when Berkeley yacc is already present in the tree is beyond us, but it's useful for the purposes of this exercise.
# $NetBSD$ # DISTNAME= bison-1.25 CATEGORIES= devel MASTER_SITES= ${MASTER_SITE_GNU:=bison/} MAINTAINER= pkgsrc-users@NetBSD.org HOMEPAGE= http://www.gnu.org/software/bison/bison.html COMMENT= GNU yacc clone GNU_CONFIGURE= yes INFO_FILES= yes .include "../../mk/bsd.pkg.mk"
GNU version of yacc. Can make re-entrant parsers, and numerous other improvements. Why you would want this when Berkeley yacc(1) is part of the NetBSD source tree is beyond me.
The NetBSD package system comes with
pkgtools/pkglint
which helps to check the contents of these
files. After installation it is quite easy to use, just change to the
directory of the package you wish to examine and run
pkglint:
$
pkglint
ERROR: Makefile: Each package must define its LICENSE. WARN: Makefile:9: HOMEPAGE should migrate from http to https. NOTE: PLIST:3: The .gz extension is unnecessary for manual pages. WARN: PLIST:5: "share/bison.hairy" should be sorted before "share/bison.simple". 1 error, 2 warnings and 1 note found. (Run "pkglint -e" to show explanations.) (Run "pkglint -fs" to show what can be fixed automatically.) (Run "pkglint.exe -F" to automatically fix some issues.)
Depending on the supplied command line arguments (see pkglint(1)), more checks will be performed. Use e.g. pkglint -Wall for a very thorough check.
Create the directory where the package lives, plus any auxiliary directories:
#
cd /usr/pkgsrc/lang
#
mkdir bison
#
cd bison
#
mkdir patches
Create Makefile
, DESCR
and
PLIST
(see Chapter 13, Package components - files, directories and contents)
then continue with fetching the distfile:
#
make fetch
>> bison-1.25.tar.gz doesn't seem to exist on this system. >> Attempting to fetch from ftp://prep.ai.mit.edu/pub/gnu//. Requesting ftp://prep.ai.mit.edu/pub/gnu//bison-1.25.tar.gz (via ftp://orpheus.amdahl.com:80/) ftp: Error retrieving file: 500 Internal error >> Attempting to fetch from ftp://wuarchive.wustl.edu/systems/gnu//. Requesting ftp://wuarchive.wustl.edu/systems/gnu//bison-1.25.tar.gz (via ftp://orpheus.amdahl.com:80/) ftp: Error retrieving file: 500 Internal error >> Attempting to fetch from ftp://ftp.freebsd.org/pub/FreeBSD/distfiles//. Requesting ftp://ftp.freebsd.org/pub/FreeBSD/distfiles//bison-1.25.tar.gz (via ftp://orpheus.amdahl.com:80/) Successfully retrieved file.
Generate the checksum of the distfile into
distinfo
:
#
make makedistinfo
Now compile:
#
make
>> Checksum OK for bison-1.25.tar.gz. ===> Extracting for bison-1.25 ===> Patching for bison-1.25 ===> Ignoring empty patch directory ===> Configuring for bison-1.25 creating cache ./config.cache checking for gcc... cc checking whether we are using GNU C... yes checking for a BSD compatible install... /usr/bin/install -c -o bin -g bin checking how to run the C preprocessor... cc -E checking for minix/config.h... no checking for POSIXized ISC... no checking whether cross-compiling... no checking for ANSI C header files... yes checking for string.h... yes checking for stdlib.h... yes checking for memory.h... yes checking for working const... yes checking for working alloca.h... no checking for alloca... yes checking for strerror... yes updating cache ./config.cache creating ./config.status creating Makefile ===> Building for bison-1.25 cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g LR0.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g allocate.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g closure.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g conflicts.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g derives.c cc -c -DXPFILE=\"/usr/pkg/share/bison.simple\" -DXPFILE1=\"/usr/pkg/share/bison.hairy\" -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -g ./files.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g getargs.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g gram.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g lalr.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g lex.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g main.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g nullable.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g output.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g print.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g reader.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g reduce.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g symtab.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g warshall.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g version.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g getopt.c cc -c -DSTDC_HEADERS=1 -DHAVE_STRING_H=1 -DHAVE_STDLIB_H=1 -DHAVE_MEMORY_H=1 -DHAVE_ALLOCA=1 -DHAVE_STRERROR=1 -I./../include -g getopt1.c cc -g -o bison LR0.o allocate.o closure.o conflicts.o derives.o files.o getargs.o gram.o lalr.o lex.o main.o nullable.o output.o print.o reader.o reduce.o symtab.o warshall.o version.o getopt.o getopt1.o ./files.c:240: warning: mktemp() possibly used unsafely, consider using mkstemp() rm -f bison.s1 sed -e "/^#line/ s|bison|/usr/pkg/share/bison|" < ./bison.simple > bison.s1
Everything seems OK, so install the files:
#
make install
>> Checksum OK for bison-1.25.tar.gz. ===> Installing for bison-1.25 sh ./mkinstalldirs /usr/pkg/bin /usr/pkg/share /usr/pkg/info /usr/pkg/man/man1 rm -f /usr/pkg/bin/bison cd /usr/pkg/share; rm -f bison.simple bison.hairy rm -f /usr/pkg/man/man1/bison.1 /usr/pkg/info/bison.info* install -c -o bin -g bin -m 555 bison /usr/pkg/bin/bison /usr/bin/install -c -o bin -g bin -m 644 bison.s1 /usr/pkg/share/bison.simple /usr/bin/install -c -o bin -g bin -m 644 ./bison.hairy /usr/pkg/share/bison.hairy cd .; for f in bison.info*; do /usr/bin/install -c -o bin -g bin -m 644 $f /usr/pkg/info/$f; done /usr/bin/install -c -o bin -g bin -m 644 ./bison.1 /usr/pkg/man/man1/bison.1 ===> Registering installation for bison-1.25
You can now use bison, and also - if you decide so - remove it with pkg_delete bison. Should you decide that you want a binary package, do this now:
#
make package
>> Checksum OK for bison-1.25.tar.gz. ===> Building package for bison-1.25 Creating package bison-1.25.tgz Registering depends:. Creating gzip'd tar ball in '/u/pkgsrc/lang/bison/bison-1.25.tgz'
Now that you don't need the source and object files any more, clean up:
#
make clean
===> Cleaning for bison-1.25
Table of Contents
#
make
===> Checking for vulnerabilities in figlet-2.2.1nb2 => figlet221.tar.gz doesn't seem to exist on this system. => Attempting to fetch figlet221.tar.gz from ftp://ftp.figlet.org/pub/figlet/program/unix/. => [172219 bytes] Connected to ftp.plig.net. 220 ftp.plig.org NcFTPd Server (licensed copy) ready. 331 Guest login ok, send your complete e-mail address as password. 230-You are user #5 of 500 simultaneous users allowed. 230- 230- ___ _ _ _ 230- | _| |_ ___ ___| |_|___ ___ ___ ___ 230- | _| _| . |_| . | | | . |_| . | _| . | 230- |_| |_| | _|_| _|_|_|_ |_|___|_| |_ | 230- |_| |_| |___| |___| 230- 230-** Welcome to ftp.plig.org ** 230- 230-Please note that all transfers from this FTP site are logged. If you 230-do not like this, please disconnect now. 230- 230-This archive is available via 230- 230-HTTP: http://ftp.plig.org/ 230-FTP: ftp://ftp.plig.org/ (max 500 connections) 230-RSYNC: rsync://ftp.plig.org/ (max 30 connections) 230- 230-Please email comments, bug reports and requests for packages to be 230-mirrored to ftp-admin@plig.org. 230- 230- 230 Logged in anonymously. Remote system type is UNIX. Using binary mode to transfer files. 200 Type okay. 250 "/pub" is new cwd. 250-"/pub/figlet" is new cwd. 250- 250-Welcome to the figlet archive at ftp.figlet.org 250- 250- ftp://ftp.figlet.org/pub/figlet/ 250- 250-The official FIGlet web page is: 250- http://www.figlet.org/ 250- 250-If you have questions, please mailto:info@figlet.org. If you want to 250-contribute a font or something else, you can email us. 250 250 "/pub/figlet/program" is new cwd. 250 "/pub/figlet/program/unix" is new cwd. local: figlet221.tar.gz remote: figlet221.tar.gz 502 Unimplemented command. 227 Entering Passive Mode (195,40,6,41,246,104) 150 Data connection accepted from 84.128.86.72:65131; transfer starting for figlet221.tar.gz (172219 bytes). 38% |************** | 65800 64.16 KB/s 00:01 ETA 226 Transfer completed. 172219 bytes received in 00:02 (75.99 KB/s) 221 Goodbye. => Checksum OK for figlet221.tar.gz. ===> Extracting for figlet-2.2.1nb2 ===> Required installed package ccache-[0-9]*: ccache-2.3nb1 found ===> Patching for figlet-2.2.1nb2 ===> Applying pkgsrc patches for figlet-2.2.1nb2 ===> Overriding tools for figlet-2.2.1nb2 ===> Creating toolchain wrappers for figlet-2.2.1nb2 ===> Configuring for figlet-2.2.1nb2 ===> Building for figlet-2.2.1nb2 gcc -O2 -DDEFAULTFONTDIR=\"/usr/pkg/share/figlet\" -DDEFAULTFONTFILE=\"standard.flf\" figlet.c zipio.c crc.c inflate.c -o figlet chmod a+x figlet gcc -O2 -o chkfont chkfont.c => Unwrapping files-to-be-installed.#
#
make install
===> Checking for vulnerabilities in figlet-2.2.1nb2 ===> Installing for figlet-2.2.1nb2 install -d -o root -g wheel -m 755 /usr/pkg/bin install -d -o root -g wheel -m 755 /usr/pkg/man/man6 mkdir -p /usr/pkg/share/figlet cp figlet /usr/pkg/bin cp chkfont /usr/pkg/bin chmod 555 figlist showfigfonts cp figlist /usr/pkg/bin cp showfigfonts /usr/pkg/bin cp fonts/*.flf /usr/pkg/share/figlet cp fonts/*.flc /usr/pkg/share/figlet cp figlet.6 /usr/pkg/man/man6 ===> Registering installation for figlet-2.2.1nb2#
Table of Contents
As in other big projects, the directory layout of pkgsrc
is quite complex for newbies. This chapter explains where you
find things on the FTP server. The base directory on
ftp.NetBSD.org
is /pub/pkgsrc/
.
On other servers it may be different, but inside this directory,
everything should look the same, no matter on which server you
are. This directory contains some subdirectories, which are
explained below.
The directory distfiles
contains lots
of archive files from all pkgsrc packages, which are mirrored
here. The subdirectories are called after their package names
and are used when the distributed files have names that don't
explicitly contain a version number or are otherwise too generic
(for example release.tar.gz
).
This directory contains things that individual pkgsrc developers find worth publishing.
This directory contains binary packages for the various
platforms that are supported by pkgsrc.
Each subdirectory is of the form OPSYS
/ARCH
/OSVERSION_TAG
. The meaning of these variables is:
OPSYS
is the name of the
operating system for which the packages have been built. The
name is taken from the output of the uname
command, so it may differ from the one you are used to
hear.
ARCH
is the hardware
architecture of the platform for which the packages have been
built. It also includes the ABI
(Application
Binary Interface) for platforms that have several of
them.
OSVERSION
is the version of
the operating system. For version numbers that change often (for
example NetBSD-current), the often-changing part should be
replaced with an x
, for example
4.99.x
.
TAG
is either
20
for a stable branch, or xx
Qy
head
for packages
built from the HEAD branch. The latter should only be used when
the packages are updated on a regular basis. Otherwise the date
from checking out pkgsrc should be appended, for example
head_20071015
.
The rationale for exactly this scheme is that the pkgsrc users looking for binary packages can quickly click through the directories on the server and find the best binary packages for their machines. Since they usually know the operating system and the hardware architecture, OPSYS and ARCH are placed first. After these choices, they can select the best combination of OSVERSION and TAG together, since it is usually the case that packages stay compatible between different version of the operating system.
In each of these directories, there is a
whole binary packages collection for a specific platform. It has a directory called
All
which contains all binary packages.
Besides that, there are various category directories that
contain symbolic links to the real binary packages.
Here are the reports from bulk builds, for those who want
to fix packages that didn't build on some of the platforms. The
structure of subdirectories should look like the one in Section C.3, “packages
: Binary packages”.
These directories contain the “real” pkgsrc, that is the files that define how to create binary packages from source archives.
Each of the current
,
stable
and
pkgsrc-20
directories share the same structure. They each contain a
xx
Qy
pkgsrc
directory and
pkgsrc.tar.{bz,gz,xz}
file.
The directory pkgsrc
contains a
snapshot of the CVS repository, which is updated regularly. The
file pkgsrc.tar.{bz,gz,xz}
contains the same
as the directory, ready to be downloaded as a whole.
The current
directory contains files
related to the HEAD branch of the CVS repository.
In this directory there is an additional file called
pkgsrc-readmes.tar.{bz,gz,xz}
that contains
all pkgsrc README
s with information about
categories and packages.
The stable
directory is a symlink to
the latest
pkgsrc-20
.
xx
Qy
The
pkgsrc-20
.
directories contain files related to the
xx
Qy
-20
stable branch of the CVS repository. In these directories there is
an additional file called
xx
Qy
pkgsrc-20
,
which contains the state of pkgsrc when it was branched.xx
Qy
.tar.{bz,gz,xz}
The following list contains all help topics that are available when running bmake help topic=:index.
#! | -lintl |
64bit | ABI |
ACCEPTABLE_LICENSES | ACROREAD_FONTPATH |
ADDITIONAL | AFAIK |
AIX | ALLOW_VULNERABLE_PACKAGES |
ALL_ENV | ALSA_PC |
ALTERNATIVES_SRC | AMANDA_TMP |
AMANDA_USER | AMANDA_VAR |
APACHE_GROUP | APACHE_MODULE_NAME |
APACHE_MODULE_SRC | APACHE_MODULE_SRCDIR |
APACHE_PKG_PREFIX | APACHE_SUEXEC_CONFIGURE_ARGS |
APACHE_SUEXEC_DOCROOT | APACHE_USER |
APPEND_ABI | APPEND_ELF |
ARLA_CACHE | AUDIT_PACKAGES_FLAGS |
AUTOCONF_REQD | AUTOMAKE_OVERRIDE |
AUTOMAKE_REQD | AUTO_MKDIRS |
BDB185_DEFAULT | BDBBASE |
BDB_ACCEPTED | BDB_DEFAULT |
BDB_LIBS | BDB_TYPE |
BIND_DIR | BIND_GROUP |
BIND_USER | BINPKG_SITES |
BIN_INSTALL_FLAGS | BISON_PKGDATADIR |
BLAS_ACCEPTED | BLAS_LIBS |
BLAS_TYPE | BOOTSTRAP_DEPENDS |
BOOTSTRAP_SETUPTOOLS | BROKEN |
BROKEN_EXCEPT_ON_PLATFORM | BROKEN_ON_PLATFORM |
BSDSRCDIR | BSDXSRCDIR |
BSD_MAKE_ENV | BUILDLINK_AUTO_DIRS |
BUILDLINK_AUTO_VARS | BUILDLINK_CFLAGS |
BUILDLINK_CONTENTS_FILTER | BUILDLINK_CPPFLAGS |
BUILDLINK_DEPMETHOD | BUILDLINK_FILES |
BUILDLINK_FILES_CMD | BUILDLINK_FNAME_TRANSFORM |
BUILDLINK_LDFLAGS | BUILDLINK_LIBS |
BUILDLINK_OPSYS_SUPPORT_PTHREAD | BUILDLINK_PKGNAME |
BUILDLINK_PREFIX | BUILDLINK_RPATHDIRS |
BUILDLINK_TREE | BUILD_DEFS |
BUILD_DEFS_EFFECTS | BUILD_DEPENDS |
BUILD_DIRS | BUILD_ENV_SHELL |
BUILD_MAKE_CMD | BUILD_MAKE_FLAGS |
BUILD_TARGET | BUILTIN_FIND_FILES |
BUILTIN_FIND_FILES_VAR | BUILTIN_FIND_GREP |
BUILTIN_FIND_HEADERS | BUILTIN_FIND_HEADERS_VAR |
BUILTIN_PKG | BUILTIN_TEST_CURSES_DEFINES |
BUILTIN_TEST_CURSES_FUNCS | BUILTIN_VERSION_SCRIPT |
BUILTIN_X11_TYPE | BUILTIN_X11_VERSION |
CACTI_GROUP | CACTI_USER |
CANNA_GROUP | CANNA_USER |
CAT | CCACHE_BASE |
CCACHE_DIR | CCACHE_LOGFILE |
CC_VERSION | CC_VERSION_STRING |
CDRECORD_CONF | CDROM_PKG_URL_DIR |
CDROM_PKG_URL_HOST | CHECKOUT_DATE |
CHECK_FAKEHOME | CHECK_FILES |
CHECK_FILES_SKIP | CHECK_FILES_STRICT |
CHECK_HEADERS | CHECK_HEADERS_SKIP |
CHECK_INTERPRETER | CHECK_INTERPRETER_SKIP |
CHECK_PERMS | CHECK_PERMS_AUTOFIX |
CHECK_PERMS_SKIP | CHECK_PORTABILITY |
CHECK_PORTABILITY_SKIP | CHECK_RELRO |
CHECK_RELRO_SKIP | CHECK_RELRO_SUPPORTED |
CHECK_SHLIBS | CHECK_SHLIBS_BLACKLIST |
CHECK_SHLIBS_SKIP | CHECK_SHLIBS_SUPPORTED |
CHECK_SSP | CHECK_SSP_SKIP |
CHECK_SSP_SUPPORTED | CHECK_STRIPPED |
CHECK_STRIPPED_SKIP | CHECK_WRKREF |
CHECK_WRKREF_EXTRA_DIRS | CHECK_WRKREF_SKIP |
CLAMAV_DBDIR | CLAMAV_GROUP |
CLAMAV_USER | CLANGBASE |
CLEANDEPENDS | CMAKE_DEPENDENCIES_REWRITE |
CMAKE_INSTALL_PREFIX | CMAKE_MODULE_PATH_OVERRIDE |
CMAKE_PKGSRC_BUILD_FLAGS | CMAKE_PREFIX_PATH |
CMAKE_USE_GNU_INSTALL_DIRS | COMMON_LISP_DOCFILES |
COMMON_LISP_EXAMPLES | COMMON_LISP_EXTRAFILES |
COMMON_LISP_PACKAGES | COMMON_LISP_SYSTEM |
COMPILER_RPATH_FLAG | COMPILER_USE_SYMLINKS |
CONFIGURE_ARGS | CONFIGURE_DIRS |
CONFIGURE_ENV | CONFIGURE_HAS_INFODIR |
CONFIGURE_HAS_MANDIR | CONFIGURE_SCRIPT |
CONFIG_SHELL | CONFIG_SHELL_FLAGS |
CONF_FILES | CONF_FILES_MODE |
CONF_FILES_PERMS | CONSERVER_DEFAULTHOST |
CONSERVER_DEFAULTPORT | CP |
CPP | CPP_PRECOMP_FLAGS |
CREATE_WRKDIR_SYMLINK | CROSSBASE |
CTFCONVERT | CTF_FILES_SKIP |
CTF_SUPPORTED | CTYPE |
CUPS_GROUP | CUPS_SYSTEM_GROUPS |
CUPS_USER | CURSES_DEFAULT |
CURSES_TYPE | CVS_EXTRACTDIR |
CVS_MODULE | CVS_PROJECT |
CVS_REPOSITORIES | CVS_ROOT |
CVS_ROOT_GNU | CVS_ROOT_NONGNU |
CVS_ROOT_SOURCEFORGE | CVS_TAG |
CXX | CYRUS_GROUP |
CYRUS_IDLE | CYRUS_USER |
DAEMONTOOLS_GROUP | DAEMONTOOLS_LOG_USER |
DBUS_GROUP | DBUS_USER |
DEFANG_GROUP | DEFANG_USER |
DEFAULT_ACCEPTABLE_LICENSES | DEFAULT_DISTFILES |
DEFAULT_IRC_SERVER | DEFAULT_SERIAL_DEVICE |
DEF_UMASK | DEINSTALLDEPENDS |
DEINSTALL_SRC | DEINSTALL_TEMPLATES |
DELAYED_ERROR_MSG | DELAYED_WARNING_MSG |
DEPENDS | DEPENDS_TARGET |
DEPENDS_TYPE | DESTDIR |
DESTDIR_VARNAME | DIALER_GROUP |
DIGEST_REQD | DISTDIR |
DISTFILES | DISTINFO_FILE |
DISTNAME | DIST_PATH |
DIST_SUBDIR | DJBDNS_AXFR_USER |
DJBDNS_CACHE_USER | DJBDNS_DJBDNS_GROUP |
DJBDNS_LOG_USER | DJBDNS_RBL_USER |
DJBDNS_TINY_USER | DLOPEN_REQUIRE_PTHREADS |
DL_AUTO_VARS | DL_CFLAGS |
DL_LDFLAGS | DL_LIBS |
DNS | DOWNLOADED_DISTFILE |
DT_LAYOUT | DYNAMIC_SITES_CMD |
DYNAMIC_SITES_SCRIPT | ECHO |
ECHO_N | ELK_GUI |
EMACS_TYPE | EMULDIR |
EMULSUBDIR | EMULSUBDIRSLASH |
EMUL_ARCH | EMUL_DISTRO |
EMUL_EXEC_FMT | EMUL_IS_NATIVE |
EMUL_MODULES | EMUL_OPSYS |
EMUL_PKG_FMT | EMUL_PLATFORM |
EMUL_PLATFORMS | EMUL_PREFER |
EMUL_REQD | EMUL_TYPE |
ERROR_MSG | EXIM_GROUP |
EXIM_USER | EXPORT_SYMBOLS_LDFLAGS |
EXTRACTOR | EXTRACT_CMD |
EXTRACT_CMD_DEFAULT | EXTRACT_DIR |
EXTRACT_ELEMENTS | EXTRACT_ENV |
EXTRACT_ONLY | EXTRACT_OPTS |
EXTRACT_SUFX | EXTRACT_USING |
FAILOVER_FETCH | FAIL_MSG |
FAKE_NCURSES | FAM |
FAM_ACCEPTED | FAM_DEFAULT |
FAM_SERVER | FCPATH |
FEATURE_CPPFLAGS | FEATURE_LDFLAGS |
FEATURE_LIBS | FETCH_AFTER_ARGS |
FETCH_BEFORE_ARGS | FETCH_CMD |
FETCH_OUTPUT_ARGS | FETCH_PROXY |
FETCH_RESUME_ARGS | FETCH_USING |
FILES_SUBST | FILES_SUBST_SED |
FIX_SYSTEM_HEADERS | FLUXBOX_USE_GNOME |
FLUXBOX_USE_KDE | FLUXBOX_USE_XFT |
FLUXBOX_USE_XINERAMA | FONTDIR |
FONTS_DIRS | FONTS_VERBOSE |
FOO_HACKS_MK | FOSSIL_EXTRACTDIR |
FOSSIL_REPO | FOSSIL_REPOSITORIES |
FOSSIL_VERSION | FOX_USE_XUNICODE |
FREEWNN_GROUP | FREEWNN_USER |
FTP_PKG_URL_DIR | FTP_PKG_URL_HOST |
GAMEDATAMODE | GAMEDATA_PERMS |
GAMEDIRMODE | GAMEDIR_PERMS |
GAMEGRP | GAMEMODE |
GAMEOWN | GAMES_GROUP |
GAMES_USER | GCC |
GCCBASE | GCC_REQD |
GCC_VERSION_SUFFIX | GEM_BUILD |
GEM_CLEANBUILD | GEM_CLEANBUILD_EXTENSIONS |
GEM_DOCDIR | GEM_EXTSDIR |
GEM_HOME | GEM_LIBDIR |
GEM_NAME | GEM_PATH |
GEM_SPECFILE | GENERATE_PLIST |
GHOSTSCRIPT_REQD | GITHUB_PROJECT |
GITHUB_RELEASE | GITHUB_TAG |
GITHUB_TYPE | GIT_BRANCH |
GIT_ENV | GIT_EXTRACTDIR |
GIT_REPO | GIT_REPOSITORIES |
GIT_REVISION | GIT_TAG |
GNU | GNU_CONFIGURE |
GNU_CONFIGURE_INFODIR | GNU_CONFIGURE_MANDIR |
GNU_CONFIGURE_STRICT | GODEP_REDIRECTS |
GO_BUILD_PATTERN | GO_DEPS |
GO_DIST_BASE | GO_SRCPATH |
GO_VERSION_DEFAULT | GROUP_SPECIFIC_PKGS |
GRUB_NETWORK_CARDS | GRUB_PRESET_COMMAND |
GRUB_SCAN_ARGS | GZIP |
HASKELL_COMPILER | HASKELL_ENABLE_HADDOCK_DOCUMENTATION |
HASKELL_ENABLE_LIBRARY_PROFILING | HASKELL_ENABLE_SHARED_LIBRARY |
HASKELL_OPTIMIZATION_LEVEL | HAS_CONFIGURE |
HEADER_TEMPLATES | HG_REPO |
HG_REPOSITORIES | HG_TAG |
HOST_PKGTOOLS_ARGS | HOST_SPECIFIC_PKGS |
HOWL_GROUP | HOWL_USER |
ICCBASE | ICECAST_CHROOTDIR |
ICON_THEMES | IDOBASE |
IGNORE_CCACHE | IGNORE_INFO_DIRS |
IGNORE_INTERACTIVE_FETCH | IMAKE |
IMAKEOPTS | IMAKE_MAKE |
IMAKE_MANINSTALL | IMAP_UW_CCLIENT_MBOX_FMT |
IMDICTDIR | INCOMPAT_CURSES |
INFO_DIR | INFO_FILES |
INFO_FILES_VERBOSE | INFO_MSG |
INIT_SYSTEM | INN_DATA_DIR |
INN_GROUP | INN_USER |
INSTALLATION_DIRS | INSTALLATION_DIRS_FROM_PLIST |
INSTALL_ENV | INSTALL_SH_OVERRIDE |
INSTALL_SRC | INSTALL_TEMPLATES |
INSTALL_UNSTRIPPED | IRCD_HYBRID_IRC_GROUP |
IRCD_HYBRID_IRC_USER | IRCD_HYBRID_MAXCONN |
IRCD_HYBRID_NICLEN | IRCD_HYBRID_SYSLOG_EVENTS |
IRCD_HYBRID_SYSLOG_FACILITY | IRCD_HYBRID_TOPICLEN |
IRIX | IRRD_USE_PGP |
JABBERD_GROUP | JABBERD_LOGDIR |
JABBERD_PIDDIR | JABBERD_SPOOLDIR |
JABBERD_USER | JAKARTA_HOME |
JAVA_APP_PATH | JAVA_APP_TARGETS |
JAVA_BINPREFIX | JAVA_CLASSPATH |
JAVA_HOME | JAVA_LD_LIBRARY_PATH |
JAVA_NAME | JAVA_UNLIMIT |
JAVA_WRAPPERS | JPEG_ACCEPTED |
JPEG_DEFAULT | KERBEROS |
KERMIT_SUID_UUCP | KJS_USE_PCRE |
KNEWS_DOMAIN_FILE | KNEWS_DOMAIN_NAME |
KRB5_ACCEPTED | KRB5_DEFAULT |
LANGUAGES | LAPACK_LIBS |
LATEX2HTML_ICONPATH | LDCONFIG_ADD_CMD |
LDCONFIG_REMOVE_CMD | LEAFNODE_DATA_DIR |
LEAFNODE_GROUP | LEAFNODE_USER |
LIBDVDCSS_HOMEPAGE | LIBDVDCSS_MASTER_SITES |
LIBRSVG_TYPE | LIBTOOL |
LIBTOOLIZE_PLIST | LIBTOOL_M4_OVERRIDE |
LIBUSB_TYPE | LICENSE |
LINKER_RPATH_FLAG | LINK_RPATH_FLAG |
LINUX_BASE_NODEPS | LINUX_BASE_PREFERRED |
LINUX_BASE_REQUIRED | LINUX_LOCALES |
LOCALBASE | LOCALBASE_LOCKTYPE |
LOCALPATCHES | LOVE_DATA |
LOVE_GAME | LOVE_VERSION |
LP64PLATFORMS | MACHINE_PLATFORM |
MAILAGENT_DOMAIN | MAILAGENT_EMAIL |
MAILAGENT_FQDN | MAILAGENT_ORGANIZATION |
MAJORDOMO_HOMEDIR | MAJOR_OS_VERSION |
MAKEINFO_ARGS | MAKE_DIRS |
MAKE_DIRS_PERMS | MAKE_ENV |
MAKE_FILE | MAKE_FLAGS |
MAKE_JOBS | MAKE_JOBS_SAFE |
MAKE_PROGRAM | MANINSTALL |
MANZ | MASTER_SITES |
MASTER_SITE_BACKUP | MASTER_SITE_CYGWIN |
MASTER_SITE_GNOME | MASTER_SITE_GNU |
MASTER_SITE_LOCAL | MASTER_SITE_MOZILLA |
MASTER_SITE_OPENOFFICE | MASTER_SITE_OVERRIDE |
MASTER_SITE_PERL_CPAN | MASTER_SITE_SUNSITE |
MASTER_SITE_SUSE | MASTER_SITE_TEX_CTAN |
MASTER_SITE_XCONTRIB | MASTER_SITE_XEMACS |
MASTER_SORT | MASTER_SORT_RANDOM |
MASTER_SORT_REGEX | MECAB_CHARSET |
MEDIATOMB_GROUP | MEDIATOMB_USER |
MIPSPROBASE | MIREDO_GROUP |
MIREDO_USER | MISSING_FEATURES |
MKDIR | MLDONKEY_GROUP |
MLDONKEY_HOME | MLDONKEY_USER |
MONOTONE_GROUP | MONOTONE_USER |
MOTIFBASE | MOTIF_TYPE |
MOTIF_TYPE_DEFAULT | MPI_TYPE |
MSGFMT_STRIP_MSGCTXT | MSGFMT_STRIP_MSGID_PLURAL |
MTOOLS_ENABLE_FLOPPYD | MUST |
MV | MYSQL_CHARSET |
MYSQL_DATADIR | MYSQL_EXTRA_CHARSET |
MYSQL_GROUP | MYSQL_PKGSRCDIR |
MYSQL_USER | MYSQL_VERSIONS_ACCEPTED |
MYSQL_VERSION_DEFAULT | NAGIOSCMD_GROUP |
NAGIOSDIR | NAGIOS_GROUP |
NAGIOS_USER | NATIVE_APPEND_ABI |
NATIVE_APPEND_ELF | NATIVE_EXEC_FMT |
NATIVE_MACHINE_PLATFORM | NATIVE_OBJECT_FMT |
NBPAX_PROGRAM_PREFIX | NETBSD_LOGIN_NAME |
NMH_EDITOR | NMH_MTA |
NMH_PAGER | NOLOGIN |
NONZERO_FILESIZE_P | NOTE |
NOT_FOR_PLATFORM | NOT_PAX_ASLR_SAFE |
NOT_PAX_MPROTECT_SAFE | NO_BUILD |
NO_CHECKSUM | NO_CONFIGURE |
NO_SKIP | NS_PREFERRED |
NULLMAILER_GROUP | NULLMAILER_USER |
OASIS | OASIS_BUILD_ARGS |
OBJHOSTNAME | OBJMACHINE |
OCAML_FINDLIB_DIRS | OCAML_FINDLIB_REGISTER |
OCAML_FINDLIB_REGISTER_VERBOSE | OCAML_SITELIBDIR |
OCAML_TOPKG_DOCDIR | OCAML_USE_DUNE |
OCAML_USE_FINDLIB | OCAML_USE_JBUILDER |
OCAML_USE_OASIS | OCAML_USE_OASIS_DYNRUN |
OCAML_USE_OPAM | OCAML_USE_OPT_COMPILER |
OCAML_USE_TOPKG | OMF |
ONLY_FOR_COMPILER | ONLY_FOR_PLATFORM |
OPENSSH_CHROOT | OPENSSH_GROUP |
OPENSSH_USER | OPSYS |
OPSYS_EMULDIR | OSS_TYPE |
OSX | OSX_TOLERATE_SDK_SKEW |
OS_HAVE_ALSA | OS_HAVE_RCD |
OS_VARIANT | OS_VERSION |
OTF_FONTS_DIR | OVERRIDE_DIRDEPTH |
OVERRIDE_GEMSPEC | OVERRIDE_GNU_CONFIG_SCRIPTS |
OVERRIDE_ROCKSPEC | OWN_DIRS |
OWN_DIRS_PERMS | P4GROUP |
P4PORT | P4ROOT |
P4USER | PACKAGES |
PALMOS_DEFAULT_SDK | PAMBASE |
PAM_DEFAULT | PAPERSIZE |
PASSIVE_FETCH | PATCHDIR |
PATCHFILES | PATCH_ARGS |
PATCH_DEBUG | PATCH_DIST_ARGS |
PATCH_DIST_CAT | PATCH_DIST_STRIP |
PATCH_FUZZ_FACTOR | PATCH_STRIP |
PATH | PCCBASE |
PEAR | PEAR_CHANNEL |
PEAR_CHANNEL_ALIAS | PEAR_CHANNEL_VERSION |
PEAR_CMD | PEAR_LIB |
PEAR_PACKAGE_XML | PERL5 |
PERL5_CONFIGURE | PERL5_CONFIGURE_DIRS |
PERL5_LDFLAGS | PERL5_LICENSE |
PERL5_MODULE_TYPE | PERL5_PACKLIST |
PERL5_PACKLIST_DIR | PERL5_PERLBASE |
PERL5_SITEBASE | PERL5_USE_PACKLIST |
PERL5_VENDORBASE | PFCTL |
PFVAR_H | PF_VERSION |
PGGROUP | PGHOME |
PGPKGSRCDIR | PGSQL_TYPE |
PGSQL_VERSIONS_ACCEPTED | PGSQL_VERSION_DEFAULT |
PGUSER | PG_LIB_EXT |
PHP | PHPCOMMON_MK |
PHPPKGSRCDIR | PHP_BASE_VERS |
PHP_CHECK_INSTALLED | PHP_EXTENSION_DIR |
PHP_INITIAL_TEENY | PHP_PKG_PREFIX |
PHP_VERSION | PHP_VERSIONS_ACCEPTED |
PHP_VERSIONS_INCOMPATIBLE | PHP_VERSION_DEFAULT |
PHP_VERSION_REQD | PILRC_USE_GTK |
PKGCONFIG_BASE | PKGCONFIG_FILE |
PKGCONFIG_OVERRIDE | PKGCONFIG_OVERRIDE_STAGE |
PKGDIR | PKGGNUDIR |
PKGINFODIR | PKGLOCALEDIR |
PKGMANDIR | PKGNAME |
PKGNAME_REQD | PKGPATH |
PKGREVISION | PKGSRC_BLAS_TYPES |
PKGSRC_CHANGES | PKGSRC_COMPILER |
PKGSRC_KEEP_BIN_PKGS | PKGSRC_LOCKTYPE |
PKGSRC_MAKE_ENV | PKGSRC_MESSAGE_RECIPIENTS |
PKGSRC_MKPIE | PKGSRC_MKREPRO |
PKGSRC_RUN_TEST | PKGSRC_SETENV |
PKGSRC_SLEEPSECS | PKGSRC_TODO |
PKGSRC_USE_CTF | PKGSRC_USE_FORTIFY |
PKGSRC_USE_RELRO | PKGSRC_USE_SSP |
PKGSRC_USE_STACK_CHECK | PKGTASKS_DATAFILE |
PKGTOOLS_ARGS | PKGTOOLS_ENV |
PKG_ALTERNATIVES | PKG_APACHE |
PKG_APACHE_ACCEPTED | PKG_APACHE_DEFAULT |
PKG_BEST_EXISTS | PKG_BUILD_OPTIONS |
PKG_COMPRESSION | PKG_CONFIG |
PKG_CONFIG_PERMS | PKG_CREATE_USERGROUP |
PKG_DB_TMPDIR | PKG_DEBUG_LEVEL |
PKG_DEFAULT_OPTIONS | PKG_DESTDIR_SUPPORT |
PKG_DEVELOPER | PKG_DISABLED_OPTIONS |
PKG_FATAL_ERRORS | PKG_FC |
PKG_FILELIST_CMD | PKG_GECOS |
PKG_GID | PKG_GROUPS |
PKG_GROUPS_VARS | PKG_HOME |
PKG_INIT_SCRIPTS | PKG_JAVA_HOME |
PKG_JVM | PKG_JVMS_ACCEPTED |
PKG_JVM_DEFAULT | PKG_LEGACY_OPTIONS |
PKG_LIBTOOL | PKG_OPTIONS |
PKG_OPTIONS_DEPRECATED_WARNINGS | PKG_OPTIONS_LEGACY_OPTS |
PKG_OPTIONS_LEGACY_VARS | PKG_OPTIONS_NONEMPTY_SETS |
PKG_OPTIONS_OPTIONAL_GROUPS | PKG_OPTIONS_REQUIRED_GROUPS |
PKG_OPTIONS_VAR | PKG_PHP |
PKG_PHP_MAJOR_VERS | PKG_PHP_VERSION |
PKG_RCD_SCRIPTS | PKG_REFCOUNT_DBDIR |
PKG_REGISTER_SHELLS | PKG_RESUME_TRANSFERS |
PKG_SHELL | PKG_SUGGESTED_OPTIONS |
PKG_SUPPORTED_OPTIONS | PKG_SYSCONFBASE |
PKG_SYSCONFBASEDIR | PKG_SYSCONFDIR |
PKG_SYSCONFDIR_PERMS | PKG_SYSCONFSUBDIR |
PKG_SYSCONFVAR | PKG_TOOLS_BIN |
PKG_UID | PKG_UPDATE_FONTS_DB |
PKG_USERS | PKG_USERS_VARS |
PKG_VERBOSE | PLIST |
PLIST_AWK | PLIST_AWK_ENV |
PLIST_SRC | PLIST_SUBST |
PLIST_TYPE | PLIST_VARS |
POPTOP_USE_MPPE | POST_FETCH_HOOK |
PREFER | PREFER_NATIVE |
PREFER_NATIVE_PTHREADS | PREFER_PKGSRC |
PREFIX | PREPEND_PATH |
PRE_ROOT_CMD | PRIVILEGED_STAGES |
PS | PTHREAD_AUTO_VARS |
PTHREAD_CFLAGS | PTHREAD_LDFLAGS |
PTHREAD_LIBS | PTHREAD_OPTS |
PTHREAD_TYPE | PVM_SSH |
PYPKGPREFIX | PYTHON_FOR_BUILD_ONLY |
PYTHON_SELF_CONFLICT | PYTHON_VERSIONED_DEPENDENCIES |
PYTHON_VERSIONS_ACCEPTED | PYTHON_VERSIONS_INCOMPATIBLE |
PYTHON_VERSION_DEFAULT | PYTHON_VERSION_REQD |
PYVERSSUFFIX | PY_NO_EGG |
QMAILDIR | QMAIL_ALIAS_USER |
QMAIL_DAEMON_USER | QMAIL_LOG_USER |
QMAIL_NOFILES_GROUP | QMAIL_PASSWD_USER |
QMAIL_QMAIL_GROUP | QMAIL_QUEUE_DIR |
QMAIL_QUEUE_EXTRA | QMAIL_QUEUE_USER |
QMAIL_REMOTE_USER | QMAIL_ROOT_USER |
QMAIL_SEND_USER | QPOPPER_FAC |
QPOPPER_SPOOL_DIR | QPOPPER_USER |
RAKE_NAME | RASMOL_DEPTH |
RCD_DIR | RCD_ORDER |
RCD_SCRIPTS | RCD_SCRIPTS_DIR |
RCD_SCRIPTS_EXAMPLEDIR | RCD_SCRIPTS_MODE |
RCD_SCRIPTS_SHELL | RCD_SCRIPT_SRC |
RCD_SUBR | RDOC |
READLINE_DEFAULT | READLINE_TYPE |
REAL_ROOT_GROUP | REAL_ROOT_USER |
RECURSIVE_MAKE | RELAY_CTRL_DIR |
REPLACE_AWK | REPLACE_BASH |
REPLACE_CSH | REPLACE_KSH |
REPLACE_PERL | REPLACE_PERL6 |
REPLACE_PHP | REPLACE_PYTHON |
REPLACE_RUBY | REPLACE_RUBY_DIRS |
REPLACE_RUBY_PAT | REPLACE_SH |
REPLACE_TEXLUA | REQD_DIRS |
REQD_DIRS_PERMS | REQD_FILES |
REQD_FILES_MODE | REQD_FILES_PERMS |
RESOLV_AUTO_VARS | RESOLV_LDFLAGS |
RESOLV_LIBS | RM |
ROCKSPEC_NAME | ROCKSPEC_SPECFILE |
ROOT_CMD | ROOT_GROUP |
ROOT_USER | RPCGEN |
RPM | RPM2PKG_PLIST |
RPM2PKG_PREFIX | RPM2PKG_STAGE |
RPM2PKG_STRIP | RPM2PKG_SUBPREFIX |
RPMFILES | RPMIGNOREPATH |
RPM_DB_PREFIX | RSSH_CVS_PATH |
RSSH_RDIST_PATH | RSSH_RSYNC_PATH |
RSSH_SCP_PATH | RSSH_SFTP_SERVER_PATH |
RUBY | RUBYGEM |
RUBYGEM_NAME | RUBYGEM_OPTIONS |
RUBY_ABI_VERSION | RUBY_ARCH |
RUBY_ARCHINC | RUBY_ARCHLIB |
RUBY_BASE | RUBY_BASERIDIR |
RUBY_BUILD_DOCUMENT | RUBY_DLEXT |
RUBY_DOC | RUBY_DYNAMIC_DIRS |
RUBY_EG | RUBY_ENCODING_ARG |
RUBY_EXTCONF | RUBY_EXTCONF_CHECK |
RUBY_EXTCONF_DEBUG | RUBY_EXTCONF_MAKEFILE |
RUBY_GEM_BASE | RUBY_INC |
RUBY_LIB | RUBY_LIB_BASE |
RUBY_NAME | RUBY_NOVERSION |
RUBY_PKGPREFIX | RUBY_RAILS |
RUBY_RAILS42_VERSION | RUBY_RAILS51_VERSION |
RUBY_RAILS52_VERSION | RUBY_RAILS_ACCEPTED |
RUBY_RAILS_DEFAULT | RUBY_RAILS_REQD |
RUBY_RAILS_STRICT_DEP | RUBY_RIDIR |
RUBY_SETUP | RUBY_SHLIB |
RUBY_SHLIBALIAS | RUBY_SHLIBVER |
RUBY_SIMPLE_INSTALL | RUBY_SITEARCHLIB |
RUBY_SITELIB | RUBY_SITELIB_BASE |
RUBY_SITERIDIR | RUBY_SLEXT |
RUBY_SRCDIR | RUBY_STATICLIB |
RUBY_SUFFIX | RUBY_SYSRIDIR |
RUBY_USE_PTHREAD | RUBY_VENDORARCHLIB |
RUBY_VENDORLIB | RUBY_VENDORLIB_BASE |
RUBY_VER | RUBY_VERSION |
RUBY_VERSIONS_ACCEPTED | RUBY_VERSION_DEFAULT |
RUBY_VERSION_REQD | RUBY_VER_DIR |
RUN | RUN_LDCONFIG |
SAWFISH_THEMES | SCO |
SCREWS_GROUP | SCREWS_USER |
SCRIPTS_ENV | SCROLLKEEPER_DATADIR |
SCROLLKEEPER_REBUILDDB | SCROLLKEEPER_UPDATEDB |
SDIST_PAWD | SERIAL_DEVICES |
SETGIDGAME | SETGID_GAMES_PERMS |
SETUID_ROOT_PERMS | SH |
SHLIB | SHORTNAME |
SIGN_PACKAGES | SILC_CLIENT_WITH_PERL |
SITE_SPECIFIC_PKGS | SKIP_DEPENDS |
SMF_INSTANCES | SMF_MANIFEST |
SMF_METHODS | SMF_METHOD_SHELL |
SMF_METHOD_SRC | SMF_NAME |
SMF_PREFIX | SMF_SRCDIR |
SNIPROXY_GROUP | SNIPROXY_USER |
SOURCE_BUFFSIZE | SPECIAL_PERMS |
SPECIFIC_PKGS | SSH_SUID |
SSP_SUPPORTED | SSYNC_PAWD |
STEP_MSG | STRIP |
STRIP_DBG | STRIP_DEBUG |
STRIP_DEBUG_SUPPORTED | STRIP_FILES_SKIP |
SU | SUBDIR |
SUBST_CLASSES | SUBST_FILES |
SUBST_FILTER_CMD | SUBST_MESSAGE |
SUBST_SED | SUBST_SHOW_DIFF |
SUBST_SKIP_TEXT_CHECK | SUBST_STAGE |
SUBST_VARS | SUNWSPROBASE |
SUSE_PREFER | SU_CMD |
SVN_EXTRACTDIR | SVN_REPO |
SVN_REPOSITORIES | SVN_REVISION |
TERMCAP_TYPE | TERMINFO_DEFAULT |
TERMINFO_TYPE | TEST |
TEST_DEPENDS | TEST_DIRS |
TEST_ENV | TEST_MAKE_CMD |
TEST_MAKE_FLAGS | TEST_TARGET |
TEXLIVE_IGNORE_PATTERNS | TEXLIVE_REV |
TEXLIVE_UNVERSIONED | TEXMFSITE |
TEX_FORMATS | TEX_HYPHEN_DAT |
TEX_HYPHEN_DEF | TEX_TEXMF_DIRS |
THTTPD_LOG_FACILITY | TO |
TOOLS_ALIASES | TOOLS_ARGS |
TOOLS_BROKEN | TOOLS_CMD |
TOOLS_CREATE | TOOLS_DIR |
TOOLS_FAIL | TOOLS_GNU_MISSING |
TOOLS_LDCONFIG | TOOLS_NOOP |
TOOLS_PATH | TOOLS_SCRIPT |
TOOL_DEPENDS | TTF_FONTDIR |
TTF_FONTS_DIR | TYPE |
UAC_REQD_EXECS | UCSPI_SSL_GROUP |
UCSPI_SSL_USER | UNLIMIT_RESOURCES |
UNPRIVILEGED | UNPRIVILEGED_GROUP |
UNPRIVILEGED_GROUPS | UNPRIVILEGED_USER |
UNWRAP_FILES | UNWRAP_PATTERNS |
UPDATE_GEMSPEC | UPDATE_TARGET |
URI | USA |
USERGROUP_PHASE | USERPPP_GROUP |
USER_SPECIFIC_PKGS | USE_ABI_DEPENDS |
USE_APR | USE_BSD_MAKEFILE |
USE_BUILTIN | USE_CROSS_COMPILE |
USE_CURSES | USE_CWRAPPERS |
USE_DB185 | USE_FEATURES |
USE_GAMESGROUP | USE_GCC_RUNTIME |
USE_IMAKE | USE_JAVA |
USE_JAVA2 | USE_LANGUAGES |
USE_LIBTOOL | USE_NATIVE_GCC |
USE_NETBSD_REPO | USE_PKGSRC_GCC |
USE_PKGSRC_GCC_RUNTIME | USE_PKGTASKS |
USE_PKG_ADMIN_DIGEST | USE_RUBY_EXTCONF |
USE_RUBY_INSTALL | USE_RUBY_SETUP |
USE_RUBY_SETUP_PKG | USE_TOOLS |
UUCP_GROUP | UUCP_USER |
VARBASE | VARNAME |
VIM_EXTRA_OPTS | WARNING_MSG |
WCALC_CGIDIR | WCALC_CGIPATH |
WCALC_HTMLDIR | WCALC_HTMLPATH |
WDM_MANAGERS | WRAPPER_REORDER_CMDS |
WRKDIR | WRKDIR_BASENAME |
WRKDIR_LOCKTYPE | WRKLOG |
WRKOBJDIR | WRKSRC |
WXGTK_ACCEPTED | WXGTK_DEFAULT |
X10_PORT | X11 |
X11BASE | X11_PKGSRCDIR |
X11_TYPE | X509_CERTIFICATE |
X509_KEY | XAW_TYPE |
XLOCK_DEFAULT_MODE | XMKMF_FLAGS |
XXX | XXXX |
YES | ZERO_FILESIZE_P |
ZSH_STATIC | __stdc__ |
_vargroups | add |
all | alternatives |
aslr | asprintf |
atlas | autoconf |
automake | autoreconf |
awk | bash |
big-endian | bin-install |
binpkg-list | blas |
bootstrap-depends | broken |
broken_on_platform | build |
build-env | buildlink-directories |
buildlink-oss-soundcard-h | c |
c++ | ccache |
cce | cdefs |
changes | changes-entry |
changes-entry-noupdate | check |
check-clean | check-files |
check-files-clean | check-vulnerable |
checksum | checksum-phase |
clean | clean-depends |
cleandir | commit |
commit-changes-entry | compact |
compiler | conf |
config.guess | config.sub |
configuration | configure |
configure-help | configure_args |
cputime | create-usergroup |
csh | ctf |
cvs | debug |
declaration | declare |
defined | depend |
dependencies | depends |
depends-checksum | depends-fetch |
deps | describe |
destdir | disable |
distclean | distinfo |
dl | dlopen |
do-build | do-buildlink |
do-clean | do-configure |
do-configure-post-hook | do-extract |
do-fetch | do-install |
emul | emulation |
emulator | enable |
endian | enomem |
err | errx |
etc | feature |
features | fetch |
fetch-list | follows |
forbids | form |
format | fortify |
fortify_source | fossil |
friend | from |
fts | fts_close |
fts_open | fts_read |
fts_set | full |
gcc | getopt_long |
getprogname | gettext |
git | github |
glob | gnu |
gnu_configure_strict | go |
go-deps | golang |
guess-license | hashbang |
heimdal | help |
hg | imake |
increment | interp |
interpreter | intl |
iso | kerberos |
krb | krb5 |
ksh | lapack |
latex | libnbcompat |
libs | libtool |
licence | license |
lintl | little-endian |
lock | locking |
lvalue | make |
makesum | memory |
mercurial | meta |
meta-package | meta_package |
mit-krb5 | mk.conf |
mkl | mount |
mprotect | mremap |
nb | nbcompat |
no | obstack |
obstack_ptr_grow | occurs |
only | openblas |
options | options.mk |
order | override |
override-intltool | override-message-intltool |
package | parallel |
partial | path |
pax | paxctl |
pbulk-index | pc |
perl | perl5 |
perms | php |
pkg-build-options | pkg-config |
pkg_build_options | platform |
plist | post-extract |
post-fetch | post-wrapper |
pre-configure | pre-extract |
pre-fetch | print-go-deps |
print-plist | print-summary-data |
privileged-install-hook | pypi |
python | readme-all |
regcomp | relro |
rename | reorder |
replace | replace_interpreter |
reproducible | resolv |
root | ruby |
setenv | setgid |
setprogname | setuid |
sh | show |
show-all | show-build-defs |
show-depends | show-deps |
show-distfiles | show-downlevel |
show-subdir-var | show-tools |
show-var | show-vars |
snprintf | ssp |
st_mode | stage-install |
strict | strip |
strnlen | strong |
subst | subversion |
sun | sunpro |
sunwspro | svn |
symlink | test |
tex | texlive |
tmp | tool |
tools | tools-libtool-m4-override |
type | ulimit |
undefined | undo-replace |
unlimit | unprivileged |
unprivileged-install-hook | unstripped |
update | upload |
upload-distfiles | usage |
use_tools | user |
utimes | vasprintf |
verbose | vsnprintf |
warn | warning |
warnings | warnx |
weak | work |
wrapper | wrkdir |
yes |
Table of Contents
This section contains information on editing the pkgsrc guide itself.
The pkgsrc guide's source code is stored in
pkgsrc/doc/guide/files
, and several files
are created from it:
pkgsrc/doc/pkgsrc.txt
pkgsrc/doc/pkgsrc.html
http://www.NetBSD.org/docs/pkgsrc/pkgsrc.pdf: The PDF version of the pkgsrc guide.
http://www.NetBSD.org/docs/pkgsrc/pkgsrc.ps: PostScript version of the pkgsrc guide.
The procedure to edit the pkgsrc guide is:
Make sure you have the packages needed to
regenerate the pkgsrc guide (and other XML-based NetBSD
documentation) installed. These are automatically installed when
you install the meta-pkgs/pkgsrc-guide-tools
package.
Run cd doc/guide to get to the right directory. All further steps will take place here.
Edit the XML file(s) in
files/
.
Run bmake to check the pkgsrc
guide for valid XML and to build the final output files. If you
get any errors at this stage, you can just edit the files, as
there are only symbolic links in the working directory, pointing
to the files in files/
.
(cd files && cvs commit)
Run bmake clean && bmake to regenerate the output files with the proper RCS Ids.
Run bmake regen to install and
commit the files in both pkgsrc/doc
and
htdocs
.
If you have added, removed or renamed some chapters, you need to synchronize them using cvs add or cvs delete in the htdocs directory.