$NetBSD: patch-bb,v 1.4 2005/12/01 18:13:24 wiz Exp $

--- man/texinfo.tex.orig	1994-10-21 05:19:39.000000000 +0100
+++ man/texinfo.tex
@@ -1,5 +1,7 @@
-%% TeX macros to handle texinfo files
+%% TeX macros to handle Texinfo files.
+%% Id: texinfo.tex,v 1.1.1.2 1997/09/24 19:26:42 gwr Exp
 
-%   Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 1994 Free Software Foundation, Inc.
+%  Copyright (C) 1985, 86, 88, 90, 91, 92, 93,
+%                94, 95, 96, 97 Free Software Foundation, Inc.
 
 %This texinfo.tex file is free software; you can redistribute it and/or
@@ -15,6 +17,6 @@
 %You should have received a copy of the GNU General Public License
 %along with this texinfo.tex file; see the file COPYING.  If not, write
-%to the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139,
-%USA.
+%to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+%Boston, MA 02111-1307, USA.
 
 
@@ -23,4 +25,14 @@
 %what you give them.   Help stamp out software-hoarding!
 
+
+% Send bug reports to bug-texinfo@prep.ai.mit.edu.
+% Please include a *precise* test case in each bug report.
+
+
+% Make it possible to create a .fmt file just by loading this file:
+% if the underlying format is not loaded, start by loading it now.
+% Added by gildea November 1993.
+\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
+
 % This automatically updates the version number based on RCS.
 \def\deftexinfoversion$#1: #2 ${\def\texinfoversion{#2}}
@@ -28,23 +40,25 @@
 \message{Loading texinfo package [Version \texinfoversion]:}
 
-% Print the version number if in a .fmt file.
-\everyjob{\message{[Texinfo version \texinfoversion]}\message{}}
+% If in a .fmt file, print the version number
+% and turn on active characters that we couldn't do earlier because
+% they might have appeared in the input file name.
+\everyjob{\message{[Texinfo version \texinfoversion]}\message{}
+  \catcode`+=\active \catcode`\_=\active}
 
 % Save some parts of plain tex whose names we will redefine.
 
-\let\ptextilde=\~
-\let\ptexlbrace=\{
-\let\ptexrbrace=\}
-\let\ptexdots=\dots
-\let\ptexdot=\.
-\let\ptexstar=\*
-\let\ptexend=\end
-\let\ptexbullet=\bullet
 \let\ptexb=\b
+\let\ptexbullet=\bullet
 \let\ptexc=\c
+\let\ptexcomma=\,
+\let\ptexdot=\.
+\let\ptexdots=\dots
+\let\ptexend=\end
+\let\ptexequiv = \equiv
 \let\ptexi=\i
+\let\ptexlbrace=\{
+\let\ptexrbrace=\}
+\let\ptexstar=\*
 \let\ptext=\t
-\let\ptexl=\l
-\let\ptexL=\L
 
 % Be sure we're in horizontal mode when doing a tie, since we make space
@@ -54,7 +68,10 @@
 % penalty on the vertical list instead of in the new paragraph.
 {\catcode`@ = 11
- \gdef\tie{\leavevmode\penalty\@M\ }
+ % Avoid using \@M directly, because that causes trouble
+ % if the definition is written into an index file.
+ \global\let\tiepenalty = \@M
+ \gdef\tie{\leavevmode\penalty\tiepenalty\ }
 }
-\let\~ = \tie                  % And make it available as @~.
+
 
 \message{Basics,}
@@ -87,8 +104,7 @@
 
 % Margin to add to right of even pages, to left of odd pages.
-\newdimen \bindingoffset  \bindingoffset=0pt
-\newdimen \normaloffset   \normaloffset=\hoffset
+\newdimen \bindingoffset
+\newdimen \normaloffset
 \newdimen\pagewidth \newdimen\pageheight
-\pagewidth=\hsize \pageheight=\vsize
 
 % Sometimes it is convenient to have everything in the transcript file
@@ -103,13 +119,17 @@
 }%
 
-%---------------------Begin change-----------------------
+% For @cropmarks command.
+% Do @cropmarks to get crop marks.
+% 
+\newif\ifcropmarks
+\let\cropmarks = \cropmarkstrue
 %
-%%%% For @cropmarks command.
-% Dimensions to add cropmarks at corners Added by P. A. MacKay, 12 Nov. 1986
+% Dimensions to add cropmarks at corners.
+% Added by P. A. MacKay, 12 Nov. 1986
 %
 \newdimen\cornerlong \newdimen\cornerthick
-\newdimen \topandbottommargin
-\newdimen \outerhsize \newdimen \outervsize
-\cornerlong=1pc\cornerthick=.3pt	% These set size of cropmarks
+\newdimen\topandbottommargin
+\newdimen\outerhsize \newdimen\outervsize
+\cornerlong=1pc\cornerthick=.3pt        % These set size of cropmarks
 \outerhsize=7in
 %\outervsize=9.5in
@@ -117,59 +137,83 @@
 \outervsize=9.25in
 \topandbottommargin=.75in
-%
-%---------------------End change-----------------------
+
+% Main output routine.
+\chardef\PAGE = 255
+\output = {\onepageout{\pagecontents\PAGE}}
+
+\newbox\headlinebox
+\newbox\footlinebox
 
 % \onepageout takes a vbox as an argument.  Note that \pagecontents
-% does insertions itself, but you have to call it yourself.
-\chardef\PAGE=255  \output={\onepageout{\pagecontents\PAGE}}
-\def\onepageout#1{\hoffset=\normaloffset
-\ifodd\pageno  \advance\hoffset by \bindingoffset
-\else \advance\hoffset by -\bindingoffset\fi
-{\escapechar=`\\\relax % makes sure backslash is used in output files.
-\shipout\vbox{{\let\hsize=\pagewidth \makeheadline} \pagebody{#1}%
-{\let\hsize=\pagewidth \makefootline}}}%
-\advancepageno \ifnum\outputpenalty>-20000 \else\dosupereject\fi}
-
-%%%% For @cropmarks command %%%%
-
-% Here is a modification of the main output routine for Near East Publications
-% This provides right-angle cropmarks at all four corners.
-% The contents of the page are centerlined into the cropmarks,
-% and any desired binding offset is added as an \hskip on either
-% site of the centerlined box.  (P. A. MacKay, 12 November, 1986)
-%
-\def\croppageout#1{\hoffset=0pt % make sure this doesn't mess things up
-{\escapechar=`\\\relax % makes sure backslash is used in output files.
-		 \shipout
-		 \vbox to \outervsize{\hsize=\outerhsize
-                 \vbox{\line{\ewtop\hfill\ewtop}}
-                 \nointerlineskip
-                 \line{\vbox{\moveleft\cornerthick\nstop}
-                       \hfill
-                       \vbox{\moveright\cornerthick\nstop}}
-                 \vskip \topandbottommargin
-                 \centerline{\ifodd\pageno\hskip\bindingoffset\fi
-			\vbox{
-			{\let\hsize=\pagewidth \makeheadline}
-			\pagebody{#1}
-			{\let\hsize=\pagewidth \makefootline}}
-			\ifodd\pageno\else\hskip\bindingoffset\fi}
-		 \vskip \topandbottommargin plus1fill minus1fill
-                 \boxmaxdepth\cornerthick
-                 \line{\vbox{\moveleft\cornerthick\nsbot}
-                       \hfill
-                       \vbox{\moveright\cornerthick\nsbot}}
-                 \nointerlineskip
-                 \vbox{\line{\ewbot\hfill\ewbot}}
-	}}
+% does insertions, but you have to call it yourself.
+\def\onepageout#1{%
+  \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
+  %
+  \ifodd\pageno  \advance\hoffset by \bindingoffset
+  \else \advance\hoffset by -\bindingoffset\fi
+  %
+  % Do this outside of the \shipout so @code etc. will be expanded in
+  % the headline as they should be, not taken literally (outputting ''code).
+  \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
+  \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
+  %
+  {%
+    % Have to do this stuff outside the \shipout because we want it to
+    % take effect in \write's, yet the group defined by the \vbox ends
+    % before the \shipout runs.
+    %
+    \escapechar = `\\     % use backslash in output files.
+    \indexdummies         % don't expand commands in the output.
+    \normalturnoffactive  % \ in index entries must not stay \, e.g., if
+                   % the page break happens to be in the middle of an example.
+    \shipout\vbox{%
+      \ifcropmarks \vbox to \outervsize\bgroup
+        \hsize = \outerhsize
+        \line{\ewtop\hfil\ewtop}%
+        \nointerlineskip
+        \line{%
+          \vbox{\moveleft\cornerthick\nstop}%
+          \hfill
+          \vbox{\moveright\cornerthick\nstop}%
+        }%
+        \vskip\topandbottommargin
+        \line\bgroup
+          \hfil % center the page within the outer (page) hsize.
+          \ifodd\pageno\hskip\bindingoffset\fi
+          \vbox\bgroup
+      \fi
+      %
+      \unvbox\headlinebox
+      \pagebody{#1}%
+      \unvbox\footlinebox
+      %
+      \ifcropmarks
+          \egroup % end of \vbox\bgroup
+        \hfil\egroup % end of (centering) \line\bgroup
+        \vskip\topandbottommargin plus1fill minus1fill
+        \boxmaxdepth = \cornerthick
+        \line{%
+          \vbox{\moveleft\cornerthick\nsbot}%
+          \hfill
+          \vbox{\moveright\cornerthick\nsbot}%
+        }%
+        \nointerlineskip
+        \line{\ewbot\hfil\ewbot}%
+      \egroup % \vbox from first cropmarks clause
+      \fi
+    }% end of \shipout\vbox
+  }% end of group with \turnoffactive
   \advancepageno
-  \ifnum\outputpenalty>-20000 \else\dosupereject\fi}
-%
-% Do @cropmarks to get crop marks
-\def\cropmarks{\let\onepageout=\croppageout }
+  \ifnum\outputpenalty>-20000 \else\dosupereject\fi
+}
+
+\newinsert\margin \dimen\margin=\maxdimen
 
 \def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
 {\catcode`\@ =11
 \gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
+% marginal hacks, juha@viisa.uucp (Juha Takala)
+\ifvoid\margin\else % marginal info is present
+  \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
 \dimen@=\dp#1 \unvbox#1
 \ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
@@ -177,5 +221,4 @@
 }
 
-%
 % Here are the rules for the cropmarks.  Note that they are
 % offset so that the space between them is truly \outerhsize or \outervsize
@@ -345,9 +388,41 @@
 
 % Used to generate quoted braces.
-
 \def\mylbrace {{\tt \char '173}}
 \def\myrbrace {{\tt \char '175}}
 \let\{=\mylbrace
 \let\}=\myrbrace
+\begingroup
+  % Definitions to produce actual \{ & \} command in an index.
+  \catcode`\{ = 12 \catcode`\} = 12
+  \catcode`\[ = 1 \catcode`\] = 2
+  \catcode`\@ = 0 \catcode`\\ = 12
+  @gdef@lbracecmd[\{]%
+  @gdef@rbracecmd[\}]%
+@endgroup
+
+% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
+% Others are defined by plain TeX: @` @' @" @^ @~ @= @v @H.
+\let\, = \c
+\let\dotaccent = \.
+\def\ringaccent#1{{\accent23 #1}}
+\let\tieaccent = \t
+\let\ubaraccent = \b
+\let\udotaccent = \d
+
+% Other special characters: @questiondown @exclamdown
+% Plain TeX defines: @AA @AE @O @OE @L (and lowercase versions) @ss.
+\def\questiondown{?`}
+\def\exclamdown{!`}
+
+% Dotless i and dotless j, used for accents.
+\def\imacro{i}
+\def\jmacro{j}
+\def\dotless#1{%
+  \def\temp{#1}%
+  \ifx\temp\imacro \ptexi
+  \else\ifx\temp\jmacro \j
+  \else \errmessage{@dotless can be used only with i or j}%
+  \fi\fi
+}
 
 % @: forces normal size whitespace following.
@@ -360,4 +435,13 @@
 \def\.{.\spacefactor=3000 }
 
+% @enddots{} is an end-of-sentence ellipsis.
+\gdef\enddots{$\mathinner{\ldotp\ldotp\ldotp\ldotp}$\spacefactor=3000}
+
+% @! is an end-of-sentence bang.
+\gdef\!{!\spacefactor=3000 }
+
+% @? is an end-of-sentence query.
+\gdef\?{?\spacefactor=3000 }
+
 % @w prevents a word break.  Without the \leavevmode, @w at the
 % beginning of a paragraph, when TeX is still in vertical mode, would
@@ -507,15 +591,32 @@ where each line of input produces a line
 \leftline{\hskip\leftskip{\rm#1}}}}
 
+% @inmargin{TEXT} puts TEXT in the margin next to the current paragraph.
+
+\def\inmargin#1{%
+\strut\vadjust{\nobreak\kern-\strutdepth
+  \vtop to \strutdepth{\baselineskip\strutdepth\vss
+  \llap{\rightskip=\inmarginspacing \vbox{\noindent #1}}\null}}}
+\newskip\inmarginspacing \inmarginspacing=1cm
+\def\strutdepth{\dp\strutbox}
+
 %\hbox{{\rm#1}}\hfil\break}}
 
 % @include file    insert text of that file as input.
-
-\def\include{\parsearg\includezzz}
-%Use \input\thisfile to avoid blank after \input, which may be an active
-%char (in which case the blank would become the \input argument).
-%The grouping keeps the value of \thisfile correct even when @include
-%is nested.
-\def\includezzz #1{\begingroup
-\def\thisfile{#1}\input\thisfile
+% Allow normal characters that  we make active in the argument (a file name).
+\def\include{\begingroup
+  \catcode`\\=12
+  \catcode`~=12
+  \catcode`^=12
+  \catcode`_=12
+  \catcode`|=12
+  \catcode`<=12
+  \catcode`>=12
+  \catcode`+=12
+  \parsearg\includezzz}
+% Restore active chars for included file.
+\def\includezzz#1{\endgroup\begingroup
+  % Read the included file in a group so nested @include's work.
+  \def\thisfile{#1}%
+  \input\thisfile
 \endgroup}
 
@@ -532,5 +633,5 @@ where each line of input produces a line
 
 \def\sp{\parsearg\spxxx}
-\def\spxxx #1{\par \vskip #1\baselineskip}
+\def\spxxx #1{\vskip #1\baselineskip}
 
 % @comment ...line which is ignored...
@@ -545,4 +646,7 @@ where each line of input produces a line
 \let\c=\comment
 
+% @paragraphindent  is defined for the Info formatting commands only.
+\let\paragraphindent=\comment
+
 % Prevent errors for section commands.
 % Used in @ignore and in failing conditionals.
@@ -579,4 +683,5 @@ where each line of input produces a line
 %
 \def\ignoremorecommands{%
+  \let\defcodeindex = \relax
   \let\defcv = \relax
   \let\deffn = \relax
@@ -602,4 +707,13 @@ where each line of input produces a line
   \let\pxref = \relax
   \let\settitle = \relax
+  \let\setchapternewpage = \relax
+  \let\setchapterstyle = \relax
+  \let\everyheading = \relax
+  \let\evenheading = \relax
+  \let\oddheading = \relax
+  \let\everyfooting = \relax
+  \let\evenfooting = \relax
+  \let\oddfooting = \relax
+  \let\headings = \relax
   \let\include = \relax
   \let\lowersections = \relax
@@ -610,5 +724,4 @@ where each line of input produces a line
   \let\clear = \relax
   \let\item = \relax
-  \let\message = \relax
 }
 
@@ -617,10 +730,22 @@ where each line of input produces a line
 \def\ignore{\doignore{ignore}}
 
-% Also ignore @ifinfo, @menu, and @direntry text.
+% Also ignore @ifinfo, @ifhtml, @html, @menu, and @direntry text.
 %
 \def\ifinfo{\doignore{ifinfo}}
+\def\ifhtml{\doignore{ifhtml}}
+\def\html{\doignore{html}}
 \def\menu{\doignore{menu}}
 \def\direntry{\doignore{direntry}}
 
+% Also ignore @macro ... @end macro.  The user must run texi2dvi,
+% which runs makeinfo to do macro expansion.  Ignore @unmacro, too.
+\def\macro{\doignore{macro}}
+\let\unmacro = \comment
+
+
+% @dircategory CATEGORY  -- specify a category of the dir file
+% which this file should belong to.  Ignore this in TeX.
+\let\dircategory = \comment
+
 % Ignore text until a line `@end #1'.
 %
@@ -654,9 +779,10 @@ where each line of input produces a line
     \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.}
     \immediate\write16{  Then upgrade your TeX installation if you can.}
+    \immediate\write16{  (See ftp://ftp.gnu.ai.mit.edu/pub/gnu/TeX.README.)}
     \immediate\write16{If you are stuck with version 3.0, run the}
     \immediate\write16{  script ``tex3patch'' from the Texinfo distribution}
     \immediate\write16{  to use a workaround.}
     \immediate\write16{}
-    \warnedobstrue
+    \global\warnedobstrue
     \fi
 }
@@ -734,7 +860,10 @@ where each line of input produces a line
 % empty), we can't just use \parsearg; we have to insert a space of our
 % own to delimit the rest of the line, and then take it out again if we
-% didn't need it.
+% didn't need it.  Make sure the catcode of space is correct to avoid
+% losing inside @example, for instance.
 %
-\def\set{\parsearg\setxxx}
+\def\set{\begingroup\catcode` =10
+  \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
+  \parsearg\setxxx}
 \def\setxxx#1{\setyyy#1 \endsetyyy}
 \def\setyyy#1 #2\endsetyyy{%
@@ -743,6 +872,10 @@ where each line of input produces a line
   \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted.
   \fi
+  \endgroup
 }
-\def\setzzz#1#2 \endsetzzz{\expandafter\xdef\csname SET#1\endcsname{#2}}
+% Can't use \xdef to pre-expand #2 and save some time, since \temp or
+% \next or other control sequences that we've defined might get us into
+% an infinite loop. Consider `@set foo @cite{bar}'.
+\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}}
 
 % @clear VAR clears (i.e., unsets) the variable VAR.
@@ -753,8 +886,14 @@ where each line of input produces a line
 % @value{foo} gets the text saved in variable foo.
 %
-\def\value#1{\expandafter
-		\ifx\csname SET#1\endcsname\relax
-			{\{No value for ``#1''\}}
-		\else \csname SET#1\endcsname \fi}
+\def\value{\begingroup
+  \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
+  \valuexxx}
+\def\valuexxx#1{%
+  \expandafter\ifx\csname SET#1\endcsname\relax
+    {\{No value for ``#1''\}}%
+  \else
+    \csname SET#1\endcsname
+  \fi
+\endgroup}
 
 % @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
@@ -856,4 +995,5 @@ where each line of input produces a line
 \global\let\lastnode=\relax}
 
+% @refill is a no-op.
 \let\refill=\relax
 
@@ -870,9 +1010,22 @@ where each line of input produces a line
 }
 
+% @bye.
 \outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
 
-\def\inforef #1{\inforefzzz #1,,,,**}
-\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
-  node \samp{\ignorespaces#1{}}}
+% \def\macro#1{\begingroup\ignoresections\catcode`\#=6\def\macrotemp{#1}\parsearg\macroxxx}
+% \def\macroxxx#1#2 \end macro{%
+% \expandafter\gdef\macrotemp#1{#2}%
+% \endgroup}
+
+%\def\linemacro#1{\begingroup\ignoresections\catcode`\#=6\def\macrotemp{#1}\parsearg\linemacroxxx}
+%\def\linemacroxxx#1#2 \end linemacro{%
+%\let\parsearg=\relax
+%\edef\macrotempx{\csname M\butfirst\expandafter\string\macrotemp\endcsname}%
+%\expandafter\xdef\macrotemp{\parsearg\macrotempx}%
+%\expandafter\gdef\macrotempx#1{#2}%
+%\endgroup}
+
+%\def\butfirst#1{}
+
 
 \message{fonts,}
@@ -886,89 +1039,127 @@ where each line of input produces a line
 \let\li = \sf % Sometimes we call it \li, not \sf.
 
+% We don't need math for this one.
+\def\ttsl{\tenttsl}
+
 %% Try out Computer Modern fonts at \magstephalf
 \let\mainmagstep=\magstephalf
 
+% Set the font macro #1 to the font named #2, adding on the
+% specified font prefix (normally `cm').
+% #3 is the font's design size, #4 is a scale factor
+\def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4}
+
+% Use cm as the default font prefix.
+% To specify the font prefix, you must define \fontprefix
+% before you read in texinfo.tex.
+\ifx\fontprefix\undefined
+\def\fontprefix{cm}
+\fi
+% Support font families that don't use the same naming scheme as CM.
+\def\rmshape{r}
+\def\rmbshape{bx}               %where the normal face is bold
+\def\bfshape{b}
+\def\bxshape{bx}
+\def\ttshape{tt}
+\def\ttbshape{tt}
+\def\ttslshape{sltt}
+\def\itshape{ti}
+\def\itbshape{bxti}
+\def\slshape{sl}
+\def\slbshape{bxsl}
+\def\sfshape{ss}
+\def\sfbshape{ss}
+\def\scshape{csc}
+\def\scbshape{csc}
+
 \ifx\bigger\relax
 \let\mainmagstep=\magstep1
-\font\textrm=cmr12
-\font\texttt=cmtt12
+\setfont\textrm\rmshape{12}{1000}
+\setfont\texttt\ttshape{12}{1000}
 \else
-\font\textrm=cmr10 scaled \mainmagstep
-\font\texttt=cmtt10 scaled \mainmagstep
+\setfont\textrm\rmshape{10}{\mainmagstep}
+\setfont\texttt\ttshape{10}{\mainmagstep}
 \fi
 % Instead of cmb10, you many want to use cmbx10.
 % cmbx10 is a prettier font on its own, but cmb10
 % looks better when embedded in a line with cmr10.
-\font\textbf=cmb10 scaled \mainmagstep
-\font\textit=cmti10 scaled \mainmagstep
-\font\textsl=cmsl10 scaled \mainmagstep
-\font\textsf=cmss10 scaled \mainmagstep
-\font\textsc=cmcsc10 scaled \mainmagstep
+\setfont\textbf\bfshape{10}{\mainmagstep}
+\setfont\textit\itshape{10}{\mainmagstep}
+\setfont\textsl\slshape{10}{\mainmagstep}
+\setfont\textsf\sfshape{10}{\mainmagstep}
+\setfont\textsc\scshape{10}{\mainmagstep}
+\setfont\textttsl\ttslshape{10}{\mainmagstep}
 \font\texti=cmmi10 scaled \mainmagstep
 \font\textsy=cmsy10 scaled \mainmagstep
 
 % A few fonts for @defun, etc.
-\font\defbf=cmbx10 scaled \magstep1 %was 1314
-\font\deftt=cmtt10 scaled \magstep1
+\setfont\defbf\bxshape{10}{\magstep1} %was 1314
+\setfont\deftt\ttshape{10}{\magstep1}
 \def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf}
 
-% Fonts for indices and small examples.
+% Fonts for indices and small examples (9pt).
 % We actually use the slanted font rather than the italic,
 % because texinfo normally uses the slanted fonts for that.
 % Do not make many font distinctions in general in the index, since they
 % aren't very useful.
-\font\ninett=cmtt9
-\font\indrm=cmr9
-\font\indit=cmsl9
+\setfont\ninett\ttshape{9}{1000}
+\setfont\indrm\rmshape{9}{1000}
+\setfont\indit\slshape{9}{1000}
 \let\indsl=\indit
 \let\indtt=\ninett
+\let\indttsl=\ninett
 \let\indsf=\indrm
 \let\indbf=\indrm
-\let\indsc=\indrm
+\setfont\indsc\scshape{10}{900}
 \font\indi=cmmi9
 \font\indsy=cmsy9
 
-% Fonts for headings
-\font\chaprm=cmbx12 scaled \magstep2
-\font\chapit=cmti12 scaled \magstep2
-\font\chapsl=cmsl12 scaled \magstep2
-\font\chaptt=cmtt12 scaled \magstep2
-\font\chapsf=cmss12 scaled \magstep2
+% Chapter (and unnumbered) fonts (17.28pt).
+\setfont\chaprm\rmbshape{12}{\magstep2}
+\setfont\chapit\itbshape{10}{\magstep3}
+\setfont\chapsl\slbshape{10}{\magstep3}
+\setfont\chaptt\ttbshape{12}{\magstep2}
+\setfont\chapttsl\ttslshape{10}{\magstep3}
+\setfont\chapsf\sfbshape{12}{\magstep2}
 \let\chapbf=\chaprm
-\font\chapsc=cmcsc10 scaled\magstep3
+\setfont\chapsc\scbshape{10}{\magstep3}
 \font\chapi=cmmi12 scaled \magstep2
 \font\chapsy=cmsy10 scaled \magstep3
 
-\font\secrm=cmbx12 scaled \magstep1
-\font\secit=cmti12 scaled \magstep1
-\font\secsl=cmsl12 scaled \magstep1
-\font\sectt=cmtt12 scaled \magstep1
-\font\secsf=cmss12 scaled \magstep1
-\font\secbf=cmbx12 scaled \magstep1
-\font\secsc=cmcsc10 scaled\magstep2
+% Section fonts (14.4pt).
+\setfont\secrm\rmbshape{12}{\magstep1}
+\setfont\secit\itbshape{10}{\magstep2}
+\setfont\secsl\slbshape{10}{\magstep2}
+\setfont\sectt\ttbshape{12}{\magstep1}
+\setfont\secttsl\ttslshape{10}{\magstep2}
+\setfont\secsf\sfbshape{12}{\magstep1}
+\let\secbf\secrm
+\setfont\secsc\scbshape{10}{\magstep2}
 \font\seci=cmmi12 scaled \magstep1
 \font\secsy=cmsy10 scaled \magstep2
 
-% \font\ssecrm=cmbx10 scaled \magstep1    % This size an font looked bad.
-% \font\ssecit=cmti10 scaled \magstep1    % The letters were too crowded.
-% \font\ssecsl=cmsl10 scaled \magstep1
-% \font\ssectt=cmtt10 scaled \magstep1
-% \font\ssecsf=cmss10 scaled \magstep1
-
-%\font\ssecrm=cmb10 scaled 1315	% Note the use of cmb rather than cmbx.
-%\font\ssecit=cmti10 scaled 1315	% Also, the size is a little larger than
-%\font\ssecsl=cmsl10 scaled 1315	% being scaled magstep1.
-%\font\ssectt=cmtt10 scaled 1315
-%\font\ssecsf=cmss10 scaled 1315
+% \setfont\ssecrm\bxshape{10}{\magstep1}    % This size an font looked bad.
+% \setfont\ssecit\itshape{10}{\magstep1}    % The letters were too crowded.
+% \setfont\ssecsl\slshape{10}{\magstep1}
+% \setfont\ssectt\ttshape{10}{\magstep1}
+% \setfont\ssecsf\sfshape{10}{\magstep1}
+
+%\setfont\ssecrm\bfshape{10}{1315}      % Note the use of cmb rather than cmbx.
+%\setfont\ssecit\itshape{10}{1315}      % Also, the size is a little larger than
+%\setfont\ssecsl\slshape{10}{1315}      % being scaled magstep1.
+%\setfont\ssectt\ttshape{10}{1315}
+%\setfont\ssecsf\sfshape{10}{1315}
 
 %\let\ssecbf=\ssecrm
 
-\font\ssecrm=cmbx12 scaled \magstephalf
-\font\ssecit=cmti12 scaled \magstephalf
-\font\ssecsl=cmsl12 scaled \magstephalf
-\font\ssectt=cmtt12 scaled \magstephalf
-\font\ssecsf=cmss12 scaled \magstephalf
-\font\ssecbf=cmbx12 scaled \magstephalf
-\font\ssecsc=cmcsc10 scaled \magstep1
+% Subsection fonts (13.15pt).
+\setfont\ssecrm\rmbshape{12}{\magstephalf}
+\setfont\ssecit\itbshape{10}{1315}
+\setfont\ssecsl\slbshape{10}{1315}
+\setfont\ssectt\ttbshape{12}{\magstephalf}
+\setfont\ssecttsl\ttslshape{10}{\magstep1}
+\setfont\ssecsf\sfbshape{12}{\magstephalf}
+\let\ssecbf\ssecrm
+\setfont\ssecsc\scbshape{10}{\magstep1}
 \font\sseci=cmmi12 scaled \magstephalf
 \font\ssecsy=cmsy10 scaled \magstep1
@@ -977,5 +1168,5 @@ where each line of input produces a line
 
 % Fonts for title page:
-\font\titlerm = cmbx12 scaled \magstep3
+\setfont\titlerm\rmbshape{12}{\magstep3}
 \let\authorrm = \secrm
 
@@ -996,32 +1187,33 @@ where each line of input produces a line
 % of just \STYLE.  We do this so that font changes will continue to work
 % in math mode, where it is the current \fam that is relevant in most
-% cases, not the current.  Plain TeX does, for example,
-% \def\bf{\fam=\bffam \tenbf}  By redefining \tenbf, we obviate the need
-% to redefine \bf itself.
+% cases, not the current font.  Plain TeX does \def\bf{\fam=\bffam
+% \tenbf}, for example.  By redefining \tenbf, we obviate the need to
+% redefine \bf itself.
 \def\textfonts{%
   \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
   \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
-  \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy
+  \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl
   \resetmathfonts}
 \def\chapfonts{%
   \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
   \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
-  \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy
-  \resetmathfonts}
+  \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl
+  \resetmathfonts \setleading{19pt}}
 \def\secfonts{%
   \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
   \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
-  \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy
-  \resetmathfonts}
+  \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy \let\tenttsl=\secttsl
+  \resetmathfonts \setleading{16pt}}
 \def\subsecfonts{%
   \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
   \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
-  \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy
-  \resetmathfonts}
+  \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl
+  \resetmathfonts \setleading{15pt}}
+\let\subsubsecfonts = \subsecfonts % Maybe make sssec fonts scaled magstephalf?
 \def\indexfonts{%
   \let\tenrm=\indrm \let\tenit=\indit \let\tensl=\indsl
   \let\tenbf=\indbf \let\tentt=\indtt \let\smallcaps=\indsc
-  \let\tensf=\indsf \let\teni=\indi \let\tensy=\indsy
-  \resetmathfonts}
+  \let\tensf=\indsf \let\teni=\indi \let\tensy=\indsy \let\tenttsl=\indttsl
+  \resetmathfonts \setleading{12pt}}
 
 % Set up the default fonts, so we can use them for creating boxes.
@@ -1033,7 +1225,7 @@ where each line of input produces a line
 
 % Fonts for short table of contents.
-\font\shortcontrm=cmr12
-\font\shortcontbf=cmbx12
-\font\shortcontsl=cmsl12
+\setfont\shortcontrm\rmshape{12}{1000}
+\setfont\shortcontbf\bxshape{12}{1000}
+\setfont\shortcontsl\slshape{12}{1000}
 
 %% Add scribe-like font environments, plus @l for inline lisp (usually sans
@@ -1062,11 +1254,19 @@ where each line of input produces a line
 
 \def\t#1{%
-  {\tt \nohyphenation \rawbackslash \frenchspacing #1}%
+  {\tt \rawbackslash \frenchspacing #1}%
   \null
 }
-\let\ttfont = \t
-%\def\samp #1{`{\tt \rawbackslash \frenchspacing #1}'\null}
+\let\ttfont=\t
 \def\samp #1{`\tclose{#1}'\null}
-\def\key #1{{\tt \nohyphenation \uppercase{#1}}\null}
+\setfont\smallrm\rmshape{8}{1000}
+\font\smallsy=cmsy9
+\def\key#1{{\smallrm\textfont2=\smallsy \leavevmode\hbox{%
+  \raise0.4pt\hbox{$\langle$}\kern-.08em\vtop{%
+    \vbox{\hrule\kern-0.4pt
+     \hbox{\raise0.4pt\hbox{\vphantom{$\langle$}}#1}}%
+    \kern-0.4pt\hrule}%
+  \kern-.06em\raise0.4pt\hbox{$\rangle$}}}}
+% The old definition, with no lozenge:
+%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
 \def\ctrl #1{{\tt \rawbackslash \hat}#1}
 
@@ -1097,5 +1297,5 @@ where each line of input produces a line
 
 % We *must* turn on hyphenation at `-' and `_' in \code.
-% Otherwise, it is too hard to avoid overful hboxes
+% Otherwise, it is too hard to avoid overfull hboxes
 % in the Emacs manual, the Library manual, etc.
 
@@ -1103,9 +1303,10 @@ where each line of input produces a line
 % both hyphenation at - and hyphenation within words.
 % We must therefore turn them both off (\tclose does that)
-% and arrange explicitly to hyphenate an a dash.
+% and arrange explicitly to hyphenate at a dash.
 %  -- rms.
 {
 \catcode`\-=\active
 \catcode`\_=\active
+\catcode`\|=\active
 \global\def\code{\begingroup \catcode`\-=\active \let-\codedash \catcode`\_=\active \let_\codeunder \codex}
 % The following is used by \doprintindex to insure that long function names
@@ -1113,10 +1314,15 @@ where each line of input produces a line
 % read from the file, as \entry parses the arguments long before \code is
 % ever called.  -- mycroft
-\global\def\indexbreaks{\catcode`\-=\active \let-\realdash \catcode`\_=\active \let_\realunder}
+% _ is always active; and it shouldn't be \let = to an _ that is a
+% subscript character anyway. Then, @cindex @samp{_} (for example)
+% fails.  --karl
+\global\def\indexbreaks{%
+  \catcode`\-=\active \let-\realdash
 }
+}
+
 \def\realdash{-}
-\def\realunder{_}
 \def\codedash{-\discretionary{}{}{}}
-\def\codeunder{\normalunderscore\discretionary{}{}{}}
+\def\codeunder{\ifusingtt{\normalunderscore\discretionary{}{}{}}{\_}}
 \def\codex #1{\tclose{#1}\endgroup}
 
@@ -1125,10 +1331,23 @@ where each line of input produces a line
 % @kbd is like @code, except that if the argument is just one @key command,
 % then @kbd has no effect.
-
+%
 \def\xkey{\key}
 \def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
 \ifx\one\xkey\ifx\threex\three \key{#2}%
-\else\tclose{\look}\fi
-\else\tclose{\look}\fi}
+\else{\tclose{\ttsl\look}}\fi
+\else{\tclose{\ttsl\look}}\fi}
+
+% @url, @email.  Quotes do not seem necessary.
+\let\url=\code % perhaps include a hypertex \special eventually
+% rms does not like the angle brackets --karl, 17may97.
+%\def\email#1{$\langle${\tt #1}$\rangle$}
+\let\email=\code
+
+% Check if we are currently using a typewriter font.  Since all the
+% Computer Modern typewriter fonts have zero interword stretch (and
+% shrink), and it is reasonable to expect all typewriter fonts to have
+% this property, we can check that font parameter.
+%
+\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
 
 % Typeset a dimension, e.g., `in' or `pt'.  The only reason for the
@@ -1140,10 +1359,17 @@ where each line of input produces a line
 \def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par}
 
-\def\l#1{{\li #1}\null}		%
+% @l was never documented to mean ``switch to the Lisp font'',
+% and it is not used as such in any manual I can find.  We need it for
+% Polish suppressed-l.  --karl, 22sep96.
+%\def\l#1{{\li #1}\null}
 
-\def\r#1{{\rm #1}}		% roman font
+\def\r#1{{\rm #1}}              % roman font
 % Use of \lowercase was suggested.
-\def\sc#1{{\smallcaps#1}}	% smallcaps font
-\def\ii#1{{\it #1}}		% italic font
+\def\sc#1{{\smallcaps#1}}       % smallcaps font
+\def\ii#1{{\it #1}}             % italic font
+
+% @pounds{} is a sterling sign.
+\def\pounds{{\it\$}}
+
 
 \message{page headings,}
@@ -1160,5 +1386,5 @@ where each line of input produces a line
 \def\shorttitlepage{\parsearg\shorttitlepagezzz}
 \def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
-	\endgroup\page\hbox{}\page}
+        \endgroup\page\hbox{}\page}
 
 \def\titlepage{\begingroup \parindent=0pt \textfonts
@@ -1177,7 +1403,7 @@ where each line of input produces a line
    \def\title{\parsearg\titlezzz}%
    \def\titlezzz##1{\leftline{\titlefont{##1}}
-		    % print a rule at the page bottom also.
-		    \finishedtitlepagefalse
-		    \vskip4pt \hrule height 4pt width \hsize \vskip4pt}%
+                    % print a rule at the page bottom also.
+                    \finishedtitlepagefalse
+                    \vskip4pt \hrule height 4pt width \hsize \vskip4pt}%
    % No rule at page bottom unless we print one at the top with @title.
    \finishedtitlepagetrue
@@ -1197,5 +1423,5 @@ where each line of input produces a line
    \def\page{%
       \iffinishedtitlepage\else
-	 \finishtitlepage
+         \finishtitlepage
       \fi
       \oldpage
@@ -1285,12 +1511,13 @@ where each line of input produces a line
 }% unbind the catcode of @.
 
-% @headings double	turns headings on for double-sided printing.
-% @headings single	turns headings on for single-sided printing.
-% @headings off		turns them off.
-% @headings on		same as @headings double, retained for compatibility.
-% @headings after	turns on double-sided headings after this page.
-% @headings doubleafter	turns on double-sided headings after this page.
+% @headings double      turns headings on for double-sided printing.
+% @headings single      turns headings on for single-sided printing.
+% @headings off         turns them off.
+% @headings on          same as @headings double, retained for compatibility.
+% @headings after       turns on double-sided headings after this page.
+% @headings doubleafter turns on double-sided headings after this page.
 % @headings singleafter turns on single-sided headings after this page.
-% By default, they are off.
+% By default, they are off at the start of a document,
+% and turned `on' after @end titlepage.
 
 \def\headings #1 {\csname HEADINGS#1\endcsname}
@@ -1306,5 +1533,4 @@ where each line of input produces a line
 % edge of all pages.
 \def\HEADINGSdouble{
-%\pagealignmacro
 \global\pageno=1
 \global\evenfootline={\hfil}
@@ -1312,9 +1538,11 @@ where each line of input produces a line
 \global\evenheadline={\line{\folio\hfil\thistitle}}
 \global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chapoddpage
 }
+\let\contentsalignmacro = \chappager
+
 % For single-sided printing, chapter title goes across top left of page,
 % page number on top right.
 \def\HEADINGSsingle{
-%\pagealignmacro
 \global\pageno=1
 \global\evenfootline={\hfil}
@@ -1322,4 +1550,5 @@ where each line of input produces a line
 \global\evenheadline={\line{\thischapter\hfil\folio}}
 \global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chappager
 }
 \def\HEADINGSon{\HEADINGSdouble}
@@ -1332,4 +1561,5 @@ where each line of input produces a line
 \global\evenheadline={\line{\folio\hfil\thistitle}}
 \global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chapoddpage
 }
 
@@ -1340,4 +1570,5 @@ where each line of input produces a line
 \global\evenheadline={\line{\thischapter\hfil\folio}}
 \global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chappager
 }
 
@@ -1363,4 +1594,5 @@ July\or August\or September\or October\o
 \def\settitlezzz #1{\gdef\thistitle{#1}}
 
+
 \message{tables,}
 
@@ -1395,5 +1627,5 @@ July\or August\or September\or October\o
 \newif\ifitemxneedsnegativevskip
 
-\def\itemxpar{\par\ifitemxneedsnegativevskip\vskip-\parskip\nobreak\fi}
+\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi}
 
 \def\internalBitem{\smallbreak \parsearg\itemzzz}
@@ -1502,5 +1734,5 @@ July\or August\or September\or October\o
 \aboveenvbreak %
 \begingroup %
-\def\Edescription{\Etable}% Neccessary kludge.
+\def\Edescription{\Etable}% Necessary kludge.
 \let\itemindex=#1%
 \ifnum 0#3>0 \advance \leftskip by #3\mil \fi %
@@ -1659,5 +1891,5 @@ July\or August\or September\or October\o
 \advance\itemno by 1
 {\let\par=\endgraf \smallbreak}%
-\ifhmode \errmessage{\in hmode at itemizeitem}\fi
+\ifhmode \errmessage{In hmode at itemizeitem}\fi
 {\parskip=0in \hskip 0pt
 \hbox to 0pt{\hss \itemcontents\hskip \itemmargin}%
@@ -1666,8 +1898,8 @@ July\or August\or September\or October\o
 
 % @multitable macros
-% Amy Hendrickson, 8/18/94
+% Amy Hendrickson, 8/18/94, 3/6/96
 %
-% @multitable ... @endmultitable will make as many columns as desired.
-% Contents of each column will wrap at width given in preamble. Width
+% @multitable ... @end multitable will make as many columns as desired.
+% Contents of each column will wrap at width given in preamble.  Width
 % can be specified either with sample text given in a template line,
 % or in percent of \hsize, the current width of text on page.
@@ -1677,24 +1909,34 @@ July\or August\or September\or October\o
 % To make preamble:
 %
-% Either define widths of columns in terms of percent of \hsize: 
-%   @multitable @percentofhsize .2 .3 .5
+% Either define widths of columns in terms of percent of \hsize:
+%   @multitable @columnfractions .25 .3 .45
 %   @item ...
 %
-%   Numbers following @percentofhsize are the percent of the total
+%   Numbers following @columnfractions are the percent of the total
 %   current hsize to be used for each column. You may use as many
 %   columns as desired.
 
+
 % Or use a template:
 %   @multitable {Column 1 template} {Column 2 template} {Column 3 template}
 %   @item ...
 %   using the widest term desired in each column.
+%
+% For those who want to use more than one line's worth of words in
+% the preamble, break the line within one argument and it
+% will parse correctly, i.e.,
+%
+%     @multitable {Column 1 template} {Column 2 template} {Column 3
+%      template}
+% Not:
+%     @multitable {Column 1 template} {Column 2 template}
+%      {Column 3 template}
 
-
-% Each new table line starts with @item, each subsequent new column 
+% Each new table line starts with @item, each subsequent new column
 % starts with @tab. Empty columns may be produced by supplying @tab's
 % with nothing between them for as many times as empty columns are needed,
 % ie, @tab@tab@tab will produce two empty columns.
 
-% @item, @tab, @multicolumn or @endmulticolumn do not need to be on their
+% @item, @tab, @multitable or @end multitable do not need to be on their
 % own lines, but it will not hurt if they are.
 
@@ -1703,34 +1945,36 @@ July\or August\or September\or October\o
 %   @multitable {Column 1 template} {Column 2 template} {Column 3 template}
 %   @item first col stuff @tab second col stuff @tab third col
-%   @item 
-%   first col stuff 
-%   @tab 
-%   second col stuff 
-%   @tab 
-%   third col 
-%   @item first col stuff @tab second col stuff 
+%   @item
+%   first col stuff
+%   @tab
+%   second col stuff
+%   @tab
+%   third col
+%   @item first col stuff @tab second col stuff
 %   @tab Many paragraphs of text may be used in any column.
-%     
+%
 %         They will wrap at the width determined by the template.
 %   @item@tab@tab This will be in third column.
-%   @endmultitable
+%   @end multitable
 
 % Default dimensions may be reset by user.
-% @intableparskip will set vertical space between paragraphs in table.
-% @intableparindent will set paragraph indent in table.
-% @spacebetweencols will set horizontal space to be left between columns.
-% @spacebetweenlines will set vertical space to be left between lines.
+% @multitableparskip is vertical space between paragraphs in table.
+% @multitableparindent is paragraph indent in table.
+% @multitablecolmargin is horizontal space to be left between columns.
+% @multitablelinespace is space to leave between table items, baseline
+%                                                            to baseline.
+%   0pt means it depends on current normal line spacing.
 
 %%%%
-% Dimensions 
+% Dimensions
 
-\newdimen\intableparskip
-\newdimen\intableparindent
-\newdimen\spacebetweencols
-\newdimen\spacebetweenlines
-\intableparskip=0pt
-\intableparindent=6pt
-\spacebetweencols=12pt
-\spacebetweenlines=12pt
+\newskip\multitableparskip
+\newskip\multitableparindent
+\newdimen\multitablecolspace
+\newskip\multitablelinespace
+\multitableparskip=0pt
+\multitableparindent=6pt
+\multitablecolspace=12pt
+\multitablelinespace=0pt
 
 %%%%
@@ -1738,58 +1982,71 @@ July\or August\or September\or October\o
 \let\endsetuptable\relax
 \def\xendsetuptable{\endsetuptable}
-\let\percentofhsize\relax
-\def\xpercentofhsize{\percentofhsize}
+\let\columnfractions\relax
+\def\xcolumnfractions{\columnfractions}
 \newif\ifsetpercent
 
+%% 2/1/96, to allow fractions to be given with more than one digit.
+\def\pickupwholefraction#1 {\global\advance\colcount by1 %
+\expandafter\xdef\csname col\the\colcount\endcsname{.#1\hsize}%
+\setuptable}
+
 \newcount\colcount
 \def\setuptable#1{\def\firstarg{#1}%
 \ifx\firstarg\xendsetuptable\let\go\relax%
 \else
-  \ifx\firstarg\xpercentofhsize\global\setpercenttrue%
+  \ifx\firstarg\xcolumnfractions\global\setpercenttrue%
   \else
     \ifsetpercent
-       \if#1.\else%
-       \global\advance\colcount by1 %
-       \expandafter\xdef\csname col\the\colcount\endcsname{.#1\hsize}%
-       \fi
+       \let\go\pickupwholefraction   % In this case arg of setuptable
+                                     % is the decimal point before the
+                                     % number given in percent of hsize.
+                                     % We don't need this so we don't use it.
     \else
        \global\advance\colcount by1
-       \setbox0=\hbox{#1}%
+       \setbox0=\hbox{#1 }% Add a normal word space as a separator;
+                          % typically that is always in the input, anyway.
        \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
     \fi%
   \fi%
-  \let\go\setuptable%
+\ifx\go\pickupwholefraction\else\let\go\setuptable\fi%
 \fi\go}
+
 %%%%
 % multitable syntax
-\def\tab{&}
+\def\tab{&\hskip1sp\relax} % 2/2/96
+                           % tiny skip here makes sure this column space is
+                           % maintained, even if it is never used.
+
 
 %%%%
-% @multitable ... @endmultitable definitions:
+% @multitable ... @end multitable definitions:
+
+\def\multitable{\parsearg\dotable}
 
-\def\multitable#1\item{\bgroup
+\def\dotable#1{\bgroup
 \let\item\cr
 \tolerance=9500
 \hbadness=9500
-\parskip=\intableparskip
-\parindent=\intableparindent
+\setmultitablespacing
+\parskip=\multitableparskip
+\parindent=\multitableparindent
 \overfullrule=0pt
 \global\colcount=0\relax%
 \def\Emultitable{\global\setpercentfalse\global\everycr{}\cr\egroup\egroup}%
  % To parse everything between @multitable and @item :
-\def\one{#1}\expandafter\setuptable\one\endsetuptable
+\setuptable#1 \endsetuptable
  % Need to reset this to 0 after \setuptable.
-\global\colcount=0\relax% 
+\global\colcount=0\relax%
  %
  % This preamble sets up a generic column definition, which will
  % be used as many times as user calls for columns.
- % \vtop will set a single line and will also let text wrap and 
+ % \vtop will set a single line and will also let text wrap and
  % continue for many paragraphs if desired.
 \halign\bgroup&\global\advance\colcount by 1\relax%
-\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
+\multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
  % In order to keep entries from bumping into each other
- % we will add a \leftskip of \spacebetweencols to all columns after
+ % we will add a \leftskip of \multitablecolspace to all columns after
  % the first one.
- %  If a template has been used, we will add \spacebetweencols 
+ %  If a template has been used, we will add \multitablecolspace
  % to the width of each template entry.
  %  If user has set preamble in terms of percent of \hsize
@@ -1803,18 +2060,56 @@ July\or August\or September\or October\o
   \else
    % If user has <not> set preamble in terms of percent of \hsize
-   % we will advance \hsize by \spacebetweencols 
-  \advance\hsize by \spacebetweencols
+   % we will advance \hsize by \multitablecolspace
+  \advance\hsize by \multitablecolspace
   \fi
- % In either case we will make \leftskip=\spacebetweencols:
-\leftskip=\spacebetweencols
+ % In either case we will make \leftskip=\multitablecolspace:
+\leftskip=\multitablecolspace
 \fi
-\noindent##}\cr%
+ % Ignoring space at the beginning and end avoids an occasional spurious
+ % blank line, when TeX decides to break the line at the space before the
+ % box from the multistrut, so the strut ends up on a line by itself.
+ % For example:
+ % @multitable @columnfractions .11 .89
+ % @item @code{#}
+ % @tab Legal holiday which is valid in major parts of the whole country.
+ % Is automatically provided with highlighting sequences respectively marking
+ % characters.
+ \noindent\ignorespaces##\unskip\multistrut}\cr
  % \everycr will reset column counter, \colcount, at the end of
- % each line. Every column  entry will cause \colcount to advance by one. 
+ % each line. Every column  entry will cause \colcount to advance by one.
  % The table preamble
  % looks at the current \colcount to find the correct column width.
-\global\everycr{\noalign{\nointerlineskip\vskip\spacebetweenlines
-\filbreak%% keeps underfull box messages off when table breaks over pages.
-\global\colcount=0\relax}}}
+\global\everycr{\noalign{%
+% \filbreak%% keeps underfull box messages off when table breaks over pages.
+% Maybe so, but it also creates really weird page breaks when the table
+% breaks over pages Wouldn't \vfil be better?  Wait until the problem
+% manifests itself, so it can be fixed for real --karl.
+\global\colcount=0\relax}}
+}
+
+\def\setmultitablespacing{% test to see if user has set \multitablelinespace.
+% If so, do nothing. If not, give it an appropriate dimension based on
+% current baselineskip.
+\ifdim\multitablelinespace=0pt
+%% strut to put in table in case some entry doesn't have descenders,
+%% to keep lines equally spaced
+\let\multistrut = \strut
+%% Test to see if parskip is larger than space between lines of
+%% table. If not, do nothing.
+%%        If so, set to same dimension as multitablelinespace.
+\else
+\gdef\multistrut{\vrule height\multitablelinespace depth\dp0
+width0pt\relax} \fi
+\ifdim\multitableparskip>\multitablelinespace
+\global\multitableparskip=\multitablelinespace
+\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
+                                      %% than skip between lines in the table.
+\fi%
+\ifdim\multitableparskip=0pt
+\global\multitableparskip=\multitablelinespace
+\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
+                                      %% than skip between lines in the table.
+\fi}
+
 
 \message{indexing,}
@@ -1830,5 +2125,5 @@ July\or August\or September\or October\o
 % \fooindex ...rest of line... puts an entry in the index foo.
 % It also defines \fooindfile to be the number of the output channel for
-% the file that	accumulates this index.  The file's extension is foo.
+% the file that accumulates this index.  The file's extension is foo.
 % The name of an index should be no more than 2 characters long
 % for the sake of vms.
@@ -1836,6 +2131,6 @@ July\or August\or September\or October\o
 \def\newindex #1{
 \expandafter\newwrite \csname#1indfile\endcsname% Define number for output file
-\openout \csname#1indfile\endcsname \jobname.#1	% Open the file
-\expandafter\xdef\csname#1index\endcsname{%	% Define \xxxindex
+\openout \csname#1indfile\endcsname \jobname.#1 % Open the file
+\expandafter\xdef\csname#1index\endcsname{%     % Define \xxxindex
 \noexpand\doindex {#1}}
 }
@@ -1849,6 +2144,6 @@ July\or August\or September\or October\o
 \def\newcodeindex #1{
 \expandafter\newwrite \csname#1indfile\endcsname% Define number for output file
-\openout \csname#1indfile\endcsname \jobname.#1	% Open the file
-\expandafter\xdef\csname#1index\endcsname{%	% Define \xxxindex
+\openout \csname#1indfile\endcsname \jobname.#1 % Open the file
+\expandafter\xdef\csname#1index\endcsname{%     % Define \xxxindex
 \noexpand\docodeindex {#1}}
 }
@@ -1861,5 +2156,5 @@ July\or August\or September\or October\o
 \expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
 \expandafter\let\csname#1indfile\endcsname=\synindexfoo
-\expandafter\xdef\csname#1index\endcsname{%	% Define \xxxindex
+\expandafter\xdef\csname#1index\endcsname{%     % Define \xxxindex
 \noexpand\doindex {#2}}%
 }
@@ -1870,5 +2165,5 @@ July\or August\or September\or October\o
 \expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
 \expandafter\let\csname#1indfile\endcsname=\synindexfoo
-\expandafter\xdef\csname#1index\endcsname{%	% Define \xxxindex
+\expandafter\xdef\csname#1index\endcsname{%     % Define \xxxindex
 \noexpand\docodeindex {#2}}%
 }
@@ -1918,8 +2213,13 @@ July\or August\or September\or October\o
 \def\ss{\realbackslash ss}%
 % Take care of texinfo commands likely to appear in an index entry.
+% (Must be a way to avoid doing expansion at all, and thus not have to
+% laboriously list every single command here.)
+\def\@{@}% will be @@ when we switch to @ as escape char.
+%\let\{ = \lbracecmd
+%\let\} = \rbracecmd
 \def\_{{\realbackslash _}}%
 \def\w{\realbackslash w }%
 \def\bf{\realbackslash bf }%
-\def\rm{\realbackslash rm }%
+%\def\rm{\realbackslash rm }%
 \def\sl{\realbackslash sl }%
 \def\sf{\realbackslash sf}%
@@ -1928,5 +2228,5 @@ July\or August\or September\or October\o
 \def\less{\realbackslash less}%
 \def\hat{\realbackslash hat}%
-\def\char{\realbackslash char}%
+%\def\char{\realbackslash char}%
 \def\TeX{\realbackslash TeX}%
 \def\dots{\realbackslash dots }%
@@ -1934,9 +2234,12 @@ July\or August\or September\or October\o
 \def\tclose##1{\realbackslash tclose {##1}}%
 \def\code##1{\realbackslash code {##1}}%
+\def\dotless##1{\realbackslash dotless {##1}}%
 \def\samp##1{\realbackslash samp {##1}}%
-\def\t##1{\realbackslash r {##1}}%
+\def\,##1{\realbackslash ,{##1}}%
+\def\t##1{\realbackslash t {##1}}%
 \def\r##1{\realbackslash r {##1}}%
 \def\i##1{\realbackslash i {##1}}%
 \def\b##1{\realbackslash b {##1}}%
+\def\sc##1{\realbackslash sc {##1}}%
 \def\cite##1{\realbackslash cite {##1}}%
 \def\key##1{\realbackslash key {##1}}%
@@ -1946,6 +2249,13 @@ July\or August\or September\or October\o
 \def\dfn##1{\realbackslash dfn {##1}}%
 \def\emph##1{\realbackslash emph {##1}}%
+\unsepspaces
 }
 
+% If an index command is used in an @example environment, any spaces
+% therein should become regular spaces in the raw index file, not the
+% expansion of \tie (\\leavevmode \penalty \@M \ ).
+{\obeyspaces
+ \gdef\unsepspaces{\obeyspaces\let =\space}}
+
 % \indexnofonts no-ops all font-change commands.
 % This is used when outputting the strings to sort the index by.
@@ -1956,4 +2266,5 @@ July\or August\or September\or October\o
 \def\indexnofonts{%
 % Just ignore accents.
+\let\,=\indexdummyfont
 \let\"=\indexdummyfont
 \let\`=\indexdummyfont
@@ -1968,4 +2279,5 @@ July\or August\or September\or October\o
 \let\v=\indexdummyfont
 \let\H=\indexdummyfont
+\let\dotless=\indexdummyfont
 % Take care of the plain tex special European modified letters.
 \def\oe{oe}%
@@ -2001,4 +2313,5 @@ July\or August\or September\or October\o
 \let\TeX=\indexdummytex
 \let\dots=\indexdummydots
+\def\@{@}%
 }
 
@@ -2012,24 +2325,39 @@ July\or August\or September\or October\o
 \let\indexbackslash=0  %overridden during \printindex.
 
+\let\SETmarginindex=\relax %initialize!
+% workhorse for all \fooindexes
+% #1 is name of index, #2 is stuff to put there
 \def\doind #1#2{%
-{\count10=\lastpenalty %
-{\indexdummies % Must do this here, since \bf, etc expand at this stage
-\escapechar=`\\%
-{\let\folio=0% Expand all macros now EXCEPT \folio
-\def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
-% so it will be output as is; and it will print as backslash in the indx.
-%
-% Now process the index-string once, with all font commands turned off,
-% to get the string to sort the index by.
-{\indexnofonts
-\xdef\temp1{#2}%
-}%
-% Now produce the complete index entry.  We process the index-string again,
-% this time with font commands expanded, to get what to print in the index.
-\edef\temp{%
-\write \csname#1indfile\endcsname{%
-\realbackslash entry {\temp1}{\folio}{#2}}}%
-\temp }%
-}\penalty\count10}}
+  % Put the index entry in the margin if desired.
+  \ifx\SETmarginindex\relax\else
+    \insert\margin{\hbox{\vrule height8pt depth3pt width0pt #2}}%
+  \fi
+  {%
+    \count255=\lastpenalty
+    {%
+      \indexdummies % Must do this here, since \bf, etc expand at this stage
+      \escapechar=`\\
+      {%
+        \let\folio=0% We will expand all macros now EXCEPT \folio.
+        \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
+        % so it will be output as is; and it will print as backslash.
+        %
+        % First process the index-string with all font commands turned off
+        % to get the string to sort by.
+        {\indexnofonts \xdef\indexsorttmp{#2}}%
+        %
+        % Now produce the complete index entry, with both the sort key and the
+        % original text, including any font commands.
+        \toks0 = {#2}%
+        \edef\temp{%
+          \write\csname#1indfile\endcsname{%
+            \realbackslash entry{\indexsorttmp}{\folio}{\the\toks0}}%
+        }%
+        \temp
+      }%
+    }%
+    \penalty\count255
+  }%
+}
 
 \def\dosubind #1#2#3{%
@@ -2085,32 +2413,14 @@ July\or August\or September\or October\o
 % Define the macros used in formatting output of the sorted index material.
 
-% This is what you call to cause a particular index to get printed.
-% Write
-% @unnumbered Function Index
-% @printindex fn
-
+% @printindex causes a particular index (the ??s file) to get printed.
+% It does not print any chapter heading (usually an @unnumbered).
+%
 \def\printindex{\parsearg\doprintindex}
-
-\def\doprintindex#1{%
-  \tex
-  \dobreak \chapheadingskip {10000}
-  \catcode`\%=\other\catcode`\&=\other\catcode`\#=\other
-  \catcode`\$=\other
-  \catcode`\~=\other
-  \indexbreaks
+\def\doprintindex#1{\begingroup
+  \dobreak \chapheadingskip{10000}%
   %
-  % The following don't help, since the chars were translated
-  % when the raw index was written, and their fonts were discarded
-  % due to \indexnofonts.
-  %\catcode`\"=\active
-  %\catcode`\^=\active
-  %\catcode`\_=\active
-  %\catcode`\|=\active
-  %\catcode`\<=\active
-  %\catcode`\>=\active
-  % %
-  \def\indexbackslash{\rawbackslashxx}
-  \indexfonts\rm \tolerance=9500 \advance\baselineskip -1pt
-  \begindoublecolumns
+  \indexfonts \rm
+  \tolerance = 9500
+  \indexbreaks
   %
   % See if the index file exists and is nonempty.
@@ -2122,5 +2432,5 @@ July\or August\or September\or October\o
     % there is some text.
     (Index is nonexistent)
-    \else
+  \else
     %
     % If the index file exists but is empty, then \openin leaves \ifeof
@@ -2131,11 +2441,18 @@ July\or August\or September\or October\o
       (Index is empty)
     \else
+      % Index files are almost Texinfo source, but we use \ as the escape
+      % character.  It would be better to use @, but that's too big a change
+      % to make right now.
+      \def\indexbackslash{\rawbackslashxx}%
+      \catcode`\\ = 0
+      \catcode`\@ = 11
+      \escapechar = `\\
+      \begindoublecolumns
       \input \jobname.#1s
+      \enddoublecolumns
     \fi
   \fi
   \closein 1
-  \enddoublecolumns
-  \Etex
-}
+\endgroup}
 
 % These macros are used by the sorted index file itself.
@@ -2191,5 +2508,5 @@ July\or August\or September\or October\o
   % Insert the text of the index entry.  TeX will do line-breaking on it.
   #1%
-  % The following is kluged to not output a line of dots in the index if
+  % The following is kludged to not output a line of dots in the index if
   % there are no page numbers.  The next person who breaks this will be
   % cursed by a Unix daemon.
@@ -2228,20 +2545,35 @@ July\or August\or September\or October\o
 }}
 
-%% Define two-column mode, which is used in indexes.
-%% Adapted from the TeXbook, page 416.
-\catcode `\@=11
+% Define two-column mode, which we use to typeset indexes.
+% Adapted from the TeXbook, page 416, which is to say,
+% the manmac.tex format used to print the TeXbook itself.
+\catcode`\@=11
 
 \newbox\partialpage
-
 \newdimen\doublecolumnhsize
 
-\def\begindoublecolumns{\begingroup
+\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
   % Grab any single-column material above us.
-  \output = {\global\setbox\partialpage
-    =\vbox{\unvbox255\kern -\topskip \kern \baselineskip}}%
+  \output = {\global\setbox\partialpage = \vbox{%
+    % 
+    % Here is a possibility not foreseen in manmac: if we accumulate a
+    % whole lot of material, we might end up calling this \output
+    % routine twice in a row (see the doublecol-lose test, which is
+    % essentially a couple of indexes with @setchapternewpage off).  In
+    % that case, we must prevent the second \partialpage from
+    % simply overwriting the first, causing us to lose the page.
+    % This will preserve it until a real output routine can ship it
+    % out.  Generally, \partialpage will be empty when this runs and
+    % this will be a no-op.
+    \unvbox\partialpage
+    %
+    % Unvbox the main output page.
+    \unvbox255
+    \kern-\topskip \kern\baselineskip
+  }}%
   \eject
   %
-  % Now switch to the double-column output routine.
-  \output={\doublecolumnout}%
+  % Use the double-column output routine for subsequent pages.
+  \output = {\doublecolumnout}%
   %
   % Change the page size parameters.  We could do this once outside this
@@ -2249,11 +2581,11 @@ July\or August\or September\or October\o
   % format, but then we repeat the same computation.  Repeating a couple
   % of assignments once per index is clearly meaningless for the
-  % execution time, so we may as well do it once.
+  % execution time, so we may as well do it in one place.
   %
   % First we halve the line length, less a little for the gutter between
   % the columns.  We compute the gutter based on the line length, so it
   % changes automatically with the paper format.  The magic constant
-  % below is chosen so that the gutter has the same value (well, +- <
-  % 1pt) as it did when we hard-coded it.
+  % below is chosen so that the gutter has the same value (well, +-<1pt)
+  % as it did when we hard-coded it.
   %
   % We put the result in a separate register, \doublecolumhsize, so we
@@ -2269,64 +2601,68 @@ July\or August\or September\or October\o
   % since nobody clobbers \vsize.)
   \vsize = 2\vsize
-  \doublecolumnpagegoal
 }
-
-\def\enddoublecolumns{\eject \endgroup \pagegoal=\vsize \unvbox\partialpage}
-
-\def\doublecolumnsplit{\splittopskip=\topskip \splitmaxdepth=\maxdepth
-  \global\dimen@=\pageheight \global\advance\dimen@ by-\ht\partialpage
-  \global\setbox1=\vsplit255 to\dimen@ \global\setbox0=\vbox{\unvbox1}
-  \global\setbox3=\vsplit255 to\dimen@ \global\setbox2=\vbox{\unvbox3}
-  \ifdim\ht0>\dimen@ \setbox255=\vbox{\unvbox0\unvbox2} \global\setbox255=\copy5 \fi
-  \ifdim\ht2>\dimen@ \setbox255=\vbox{\unvbox0\unvbox2} \global\setbox255=\copy5 \fi
-}
-\def\doublecolumnpagegoal{%
-  \dimen@=\vsize \advance\dimen@ by-2\ht\partialpage \global\pagegoal=\dimen@
-}
-\def\pagesofar{\unvbox\partialpage %
-  \hsize=\doublecolumnhsize % have to restore this since output routine
-  \wd0=\hsize \wd2=\hsize \hbox to\pagewidth{\box0\hfil\box2}}
 \def\doublecolumnout{%
-  \setbox5=\copy255
-  {\vbadness=10000 \doublecolumnsplit}
-  \ifvbox255
-    \setbox0=\vtop to\dimen@{\unvbox0}
-    \setbox2=\vtop to\dimen@{\unvbox2}
-    \onepageout\pagesofar \unvbox255 \penalty\outputpenalty
-  \else
-    \setbox0=\vbox{\unvbox5}
-    \ifvbox0
-      \dimen@=\ht0 \advance\dimen@ by\topskip \advance\dimen@ by-\baselineskip
-      \divide\dimen@ by2 \splittopskip=\topskip \splitmaxdepth=\maxdepth
-      {\vbadness=10000
-	\loop \global\setbox5=\copy0
-          \setbox1=\vsplit5 to\dimen@
-          \setbox3=\vsplit5 to\dimen@
-          \ifvbox5 \global\advance\dimen@ by1pt \repeat
-        \setbox0=\vbox to\dimen@{\unvbox1}
-        \setbox2=\vbox to\dimen@{\unvbox3}
-        \global\setbox\partialpage=\vbox{\pagesofar}
-        \doublecolumnpagegoal
-      }
-    \fi
-  \fi
+  \splittopskip=\topskip \splitmaxdepth=\maxdepth
+  % Get the available space for the double columns -- the normal
+  % (undoubled) page height minus any material left over from the
+  % previous page.
+  \dimen@=\pageheight \advance\dimen@ by-\ht\partialpage
+  % box0 will be the left-hand column, box2 the right.
+  \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
+  \onepageout\pagesofar
+  \unvbox255
+  \penalty\outputpenalty
+}
+\def\pagesofar{%
+  % Re-output the contents of the output page -- any previous material,
+  % followed by the two boxes we just split.
+  \unvbox\partialpage
+  \hsize = \doublecolumnhsize
+  \wd0=\hsize \wd2=\hsize \hbox to\pagewidth{\box0\hfil\box2}%
 }
+\def\enddoublecolumns{%
+  \output = {\balancecolumns}\eject % split what we have
+  \endgroup % started in \begindoublecolumns
+  %
+  % Back to normal single-column typesetting, but take account of the
+  % fact that we just accumulated some stuff on the output page.
+  \pagegoal = \vsize
+}
+\def\balancecolumns{%
+  % Called at the end of the double column material.
+  \setbox0 = \vbox{\unvbox255}%
+  \dimen@ = \ht0
+  \advance\dimen@ by \topskip
+  \advance\dimen@ by-\baselineskip
+  \divide\dimen@ by 2
+  \splittopskip = \topskip
+  % Loop until we get a decent breakpoint.
+  {\vbadness=10000 \loop
+    \global\setbox3=\copy0
+    \global\setbox1=\vsplit3 to\dimen@
+    \ifdim\ht3>\dimen@ \global\advance\dimen@ by1pt
+   \repeat}%
+  \setbox0=\vbox to\dimen@{\unvbox1}%
+  \setbox2=\vbox to\dimen@{\unvbox3}%
+  \pagesofar
+}
+\catcode`\@ = \other
+
 
-\catcode `\@=\other
 \message{sectioning,}
 % Define chapters, sections, etc.
 
-\newcount \chapno
-\newcount \secno        \secno=0
-\newcount \subsecno     \subsecno=0
-\newcount \subsubsecno  \subsubsecno=0
+\newcount\chapno
+\newcount\secno        \secno=0
+\newcount\subsecno     \subsecno=0
+\newcount\subsubsecno  \subsubsecno=0
 
 % This counter is funny since it counts through charcodes of letters A, B, ...
-\newcount \appendixno  \appendixno = `\@
+\newcount\appendixno  \appendixno = `\@
 \def\appendixletter{\char\the\appendixno}
 
-\newwrite \contentsfile
+\newwrite\contentsfile
 % This is called from \setfilename.
-\def\opencontents{\openout \contentsfile = \jobname.toc}
+\def\opencontents{\openout\contentsfile = \jobname.toc }
 
 % Each @chapter defines this as the name of the chapter.
@@ -2334,40 +2670,39 @@ July\or August\or September\or October\o
 
 \def\thischapter{} \def\thissection{}
-\def\seccheck#1{\if \pageno<0 %
-\errmessage{@#1 not allowed after generating table of contents}\fi
-%
-}
+\def\seccheck#1{\ifnum \pageno<0
+  \errmessage{@#1 not allowed after generating table of contents}%
+\fi}
 
 \def\chapternofonts{%
-\let\rawbackslash=\relax%
-\let\frenchspacing=\relax%
-\def\result{\realbackslash result}
-\def\equiv{\realbackslash equiv}
-\def\expansion{\realbackslash expansion}
-\def\print{\realbackslash print}
-\def\TeX{\realbackslash TeX}
-\def\dots{\realbackslash dots}
-\def\copyright{\realbackslash copyright}
-\def\tt{\realbackslash tt}
-\def\bf{\realbackslash bf }
-\def\w{\realbackslash w}
-\def\less{\realbackslash less}
-\def\gtr{\realbackslash gtr}
-\def\hat{\realbackslash hat}
-\def\char{\realbackslash char}
-\def\tclose##1{\realbackslash tclose {##1}}
-\def\code##1{\realbackslash code {##1}}
-\def\samp##1{\realbackslash samp {##1}}
-\def\r##1{\realbackslash r {##1}}
-\def\b##1{\realbackslash b {##1}}
-\def\key##1{\realbackslash key {##1}}
-\def\file##1{\realbackslash file {##1}}
-\def\kbd##1{\realbackslash kbd {##1}}
-% These are redefined because @smartitalic wouldn't work inside xdef.
-\def\i##1{\realbackslash i {##1}}
-\def\cite##1{\realbackslash cite {##1}}
-\def\var##1{\realbackslash var {##1}}
-\def\emph##1{\realbackslash emph {##1}}
-\def\dfn##1{\realbackslash dfn {##1}}
+  \let\rawbackslash=\relax
+  \let\frenchspacing=\relax
+  \def\result{\realbackslash result}%
+  \def\equiv{\realbackslash equiv}%
+  \def\expansion{\realbackslash expansion}%
+  \def\print{\realbackslash print}%
+  \def\TeX{\realbackslash TeX}%
+  \def\dots{\realbackslash dots}%
+  \def\copyright{\realbackslash copyright}%
+  \def\tt{\realbackslash tt}%
+  \def\bf{\realbackslash bf}%
+  \def\w{\realbackslash w}%
+  \def\less{\realbackslash less}%
+  \def\gtr{\realbackslash gtr}%
+  \def\hat{\realbackslash hat}%
+  \def\char{\realbackslash char}%
+  \def\tclose##1{\realbackslash tclose{##1}}%
+  \def\code##1{\realbackslash code{##1}}%
+  \def\samp##1{\realbackslash samp{##1}}%
+  \def\r##1{\realbackslash r{##1}}%
+  \def\b##1{\realbackslash b{##1}}%
+  \def\key##1{\realbackslash key{##1}}%
+  \def\file##1{\realbackslash file{##1}}%
+  \def\kbd##1{\realbackslash kbd{##1}}%
+  % These are redefined because @smartitalic wouldn't work inside xdef.
+  \def\i##1{\realbackslash i{##1}}%
+  \def\cite##1{\realbackslash cite{##1}}%
+  \def\var##1{\realbackslash var{##1}}%
+  \def\emph##1{\realbackslash emph{##1}}%
+  \def\dfn##1{\realbackslash dfn{##1}}%
 }
 
@@ -2448,5 +2783,5 @@ July\or August\or September\or October\o
 \def\chapterzzz #1{\seccheck{chapter}%
 \secno=0 \subsecno=0 \subsubsecno=0
-\global\advance \chapno by 1 \message{Chapter \the\chapno}%
+\global\advance \chapno by 1 \message{\putwordChapter \the\chapno}%
 \chapmacro {#1}{\the\chapno}%
 \gdef\thissection{#1}%
@@ -2456,5 +2791,6 @@ July\or August\or September\or October\o
 \xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}%
 {\chapternofonts%
-\edef\temp{{\realbackslash chapentry {#1}{\the\chapno}{\noexpand\folio}}}%
+\toks0 = {#1}%
+\edef\temp{{\realbackslash chapentry{\the\toks0}{\the\chapno}{\noexpand\folio}}}%
 \escapechar=`\\%
 \write \contentsfile \temp  %
@@ -2475,6 +2811,7 @@ July\or August\or September\or October\o
 \xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}%
 {\chapternofonts%
-\edef\temp{{\realbackslash chapentry
-  {#1}{\putwordAppendix{} \appendixletter}{\noexpand\folio}}}%
+\toks0 = {#1}%
+\edef\temp{{\realbackslash chapentry{\the\toks0}%
+  {\putwordAppendix{} \appendixletter}{\noexpand\folio}}}%
 \escapechar=`\\%
 \write \contentsfile \temp  %
@@ -2485,4 +2822,8 @@ July\or August\or September\or October\o
 }}
 
+% @centerchap is like @unnumbered, but the heading is centered.
+\outer\def\centerchap{\parsearg\centerchapyyy}
+\def\centerchapyyy #1{{\let\unnumbchapmacro=\centerchapmacro \unnumberedyyy{#1}}}
+
 \outer\def\top{\parsearg\unnumberedyyy}
 \outer\def\unnumbered{\parsearg\unnumberedyyy}
@@ -2506,5 +2847,6 @@ July\or August\or September\or October\o
 \gdef\thischapter{#1}\gdef\thissection{#1}%
 {\chapternofonts%
-\edef\temp{{\realbackslash unnumbchapentry {#1}{\noexpand\folio}}}%
+\toks0 = {#1}%
+\edef\temp{{\realbackslash unnumbchapentry{\the\toks0}{\noexpand\folio}}}%
 \escapechar=`\\%
 \write \contentsfile \temp  %
@@ -2521,6 +2863,7 @@ July\or August\or September\or October\o
 \gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}%
 {\chapternofonts%
+\toks0 = {#1}%
 \edef\temp{{\realbackslash secentry %
-{#1}{\the\chapno}{\the\secno}{\noexpand\folio}}}%
+{\the\toks0}{\the\chapno}{\the\secno}{\noexpand\folio}}}%
 \escapechar=`\\%
 \write \contentsfile \temp %
@@ -2529,5 +2872,5 @@ July\or August\or September\or October\o
 }}
 
-\outer\def\appenixsection{\parsearg\appendixsecyyy}
+\outer\def\appendixsection{\parsearg\appendixsecyyy}
 \outer\def\appendixsec{\parsearg\appendixsecyyy}
 \def\appendixsecyyy #1{\apphead1{#1}} % normally calls appendixsectionzzz
@@ -2536,6 +2879,7 @@ July\or August\or September\or October\o
 \gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}%
 {\chapternofonts%
+\toks0 = {#1}%
 \edef\temp{{\realbackslash secentry %
-{#1}{\appendixletter}{\the\secno}{\noexpand\folio}}}%
+{\the\toks0}{\appendixletter}{\the\secno}{\noexpand\folio}}}%
 \escapechar=`\\%
 \write \contentsfile \temp %
@@ -2549,5 +2893,6 @@ July\or August\or September\or October\o
 \plainsecheading {#1}\gdef\thissection{#1}%
 {\chapternofonts%
-\edef\temp{{\realbackslash unnumbsecentry{#1}{\noexpand\folio}}}%
+\toks0 = {#1}%
+\edef\temp{{\realbackslash unnumbsecentry{\the\toks0}{\noexpand\folio}}}%
 \escapechar=`\\%
 \write \contentsfile \temp %
@@ -2562,6 +2907,7 @@ July\or August\or September\or October\o
 \subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}%
 {\chapternofonts%
+\toks0 = {#1}%
 \edef\temp{{\realbackslash subsecentry %
-{#1}{\the\chapno}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
+{\the\toks0}{\the\chapno}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
 \escapechar=`\\%
 \write \contentsfile \temp %
@@ -2576,6 +2922,7 @@ July\or August\or September\or October\o
 \subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}%
 {\chapternofonts%
+\toks0 = {#1}%
 \edef\temp{{\realbackslash subsecentry %
-{#1}{\appendixletter}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
+{\the\toks0}{\appendixletter}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
 \escapechar=`\\%
 \write \contentsfile \temp %
@@ -2587,7 +2934,8 @@ July\or August\or September\or October\o
 \def\unnumberedsubsecyyy #1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
 \def\unnumberedsubseczzz #1{\seccheck{unnumberedsubsec}%
-\plainsecheading {#1}\gdef\thissection{#1}%
+\plainsubsecheading {#1}\gdef\thissection{#1}%
 {\chapternofonts%
-\edef\temp{{\realbackslash unnumbsubsecentry{#1}{\noexpand\folio}}}%
+\toks0 = {#1}%
+\edef\temp{{\realbackslash unnumbsubsecentry{\the\toks0}{\noexpand\folio}}}%
 \escapechar=`\\%
 \write \contentsfile \temp %
@@ -2603,6 +2951,6 @@ July\or August\or September\or October\o
   {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
 {\chapternofonts%
-\edef\temp{{\realbackslash subsubsecentry %
-  {#1}
+\toks0 = {#1}%
+\edef\temp{{\realbackslash subsubsecentry{\the\toks0}
   {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}
   {\noexpand\folio}}}%
@@ -2620,5 +2968,6 @@ July\or August\or September\or October\o
   {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
 {\chapternofonts%
-\edef\temp{{\realbackslash subsubsecentry{#1}%
+\toks0 = {#1}%
+\edef\temp{{\realbackslash subsubsecentry{\the\toks0}%
   {\appendixletter}
   {\the\secno}{\the\subsecno}{\the\subsubsecno}{\noexpand\folio}}}%
@@ -2632,7 +2981,8 @@ July\or August\or September\or October\o
 \def\unnumberedsubsubsecyyy #1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
 \def\unnumberedsubsubseczzz #1{\seccheck{unnumberedsubsubsec}%
-\plainsecheading {#1}\gdef\thissection{#1}%
+\plainsubsubsecheading {#1}\gdef\thissection{#1}%
 {\chapternofonts%
-\edef\temp{{\realbackslash unnumbsubsubsecentry{#1}{\noexpand\folio}}}%
+\toks0 = {#1}%
+\edef\temp{{\realbackslash unnumbsubsubsecentry{\the\toks0}{\noexpand\folio}}}%
 \escapechar=`\\%
 \write \contentsfile \temp %
@@ -2670,8 +3020,8 @@ July\or August\or September\or October\o
 % NOTE on use of \vbox for chapter headings, section headings, and
 % such:
-%	1) We use \vbox rather than the earlier \line to permit
-%	   overlong headings to fold.
-%	2) \hyphenpenalty is set to 10000 because hyphenation in a
-%	   heading is obnoxious; this forbids it.
+%       1) We use \vbox rather than the earlier \line to permit
+%          overlong headings to fold.
+%       2) \hyphenpenalty is set to 10000 because hyphenation in a
+%          heading is obnoxious; this forbids it.
 %       3) Likewise, headings look best if no \parindent is used, and
 %          if justification is not attempted.  Hence \raggedright.
@@ -2691,9 +3041,8 @@ July\or August\or September\or October\o
                   \rm #1\hfill}}\bigskip \par\penalty 200}
 
-\def\heading{\parsearg\secheadingi}
-
-\def\subheading{\parsearg\subsecheadingi}
-
-\def\subsubheading{\parsearg\subsubsecheadingi}
+% @heading, @subheading, @subsubheading.
+\def\heading{\parsearg\plainsecheading}
+\def\subheading{\parsearg\plainsubsecheading}
+\def\subsubheading{\parsearg\plainsubsubsecheading}
 
 % These macros generate a chapter, section, etc. heading only
@@ -2709,5 +3058,5 @@ July\or August\or September\or October\o
 % Parameter controlling skip before chapter headings (if needed)
 
-\newskip \chapheadingskip \chapheadingskip = 30pt plus 8pt minus 4pt
+\newskip\chapheadingskip
 
 \def\chapbreak{\dobreak \chapheadingskip {-4000}}
@@ -2718,8 +3067,10 @@ July\or August\or September\or October\o
 
 \def\CHAPPAGoff{
+\global\let\contentsalignmacro = \chappager
 \global\let\pchapsepmacro=\chapbreak
 \global\let\pagealignmacro=\chappager}
 
 \def\CHAPPAGon{
+\global\let\contentsalignmacro = \chappager
 \global\let\pchapsepmacro=\chappager
 \global\let\pagealignmacro=\chappager
@@ -2727,4 +3078,5 @@ July\or August\or September\or October\o
 
 \def\CHAPPAGodd{
+\global\let\contentsalignmacro = \chapoddpage
 \global\let\pchapsepmacro=\chapoddpage
 \global\let\pagealignmacro=\chapoddpage
@@ -2735,23 +3087,37 @@ July\or August\or September\or October\o
 \def\CHAPFplain{
 \global\let\chapmacro=\chfplain
-\global\let\unnumbchapmacro=\unnchfplain}
+\global\let\unnumbchapmacro=\unnchfplain
+\global\let\centerchapmacro=\centerchfplain}
 
-\def\chfplain #1#2{%
+% Plain chapter opening.
+% #1 is the text, #2 the chapter number or empty if unnumbered.
+\def\chfplain#1#2{%
   \pchapsepmacro
   {%
-    \chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
-                     \parindent=0pt\raggedright
-                     \rm #2\enspace #1}%
+    \chapfonts \rm
+    \def\chapnum{#2}%
+    \setbox0 = \hbox{#2\ifx\chapnum\empty\else\enspace\fi}%
+    \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
+          \hangindent = \wd0 \centerparametersmaybe
+          \unhbox0 #1\par}%
   }%
-  \bigskip
-  \penalty5000
+  \nobreak\bigskip % no page break after a chapter title
+  \nobreak
 }
 
-\def\unnchfplain #1{%
-\pchapsepmacro %
-{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
-                  \parindent=0pt\raggedright
-                  \rm #1\hfill}}\bigskip \par\penalty 10000 %
-}
+% Plain opening for unnumbered.
+\def\unnchfplain#1{\chfplain{#1}{}}
+
+% @centerchap -- centered and unnumbered.
+\let\centerparametersmaybe = \relax
+\def\centerchfplain#1{{%
+  \def\centerparametersmaybe{%
+    \advance\rightskip by 3\rightskip
+    \leftskip = \rightskip
+    \parfillskip = 0pt
+  }%
+  \chfplain{#1}{}%
+}}
+
 \CHAPFplain % The default
 
@@ -2767,57 +3133,61 @@ July\or August\or September\or October\o
 }
 
+\def\centerchfopen #1{%
+\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
+                       \parindent=0pt
+                       \hfill {\rm #1}\hfill}}\bigskip \par\penalty 10000 %
+}
+
 \def\CHAPFopen{
 \global\let\chapmacro=\chfopen
-\global\let\unnumbchapmacro=\unnchfopen}
+\global\let\unnumbchapmacro=\unnchfopen
+\global\let\centerchapmacro=\centerchfopen}
 
-% Parameter controlling skip before section headings.
-
-\newskip \subsecheadingskip  \subsecheadingskip = 17pt plus 8pt minus 4pt
-\def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}}
 
-\newskip \secheadingskip  \secheadingskip = 21pt plus 8pt minus 4pt
+% Section titles.
+\newskip\secheadingskip
 \def\secheadingbreak{\dobreak \secheadingskip {-1000}}
+\def\secheading#1#2#3{\sectionheading{sec}{#2.#3}{#1}}
+\def\plainsecheading#1{\sectionheading{sec}{}{#1}}
 
-% @paragraphindent  is defined for the Info formatting commands only.
-\let\paragraphindent=\comment
+% Subsection titles.
+\newskip \subsecheadingskip
+\def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}}
+\def\subsecheading#1#2#3#4{\sectionheading{subsec}{#2.#3.#4}{#1}}
+\def\plainsubsecheading#1{\sectionheading{subsec}{}{#1}}
 
-% Section fonts are the base font at magstep2, which produces
-% a size a bit more than 14 points in the default situation.
+% Subsubsection titles.
+\let\subsubsecheadingskip = \subsecheadingskip
+\let\subsubsecheadingbreak = \subsecheadingbreak
+\def\subsubsecheading#1#2#3#4#5{\sectionheading{subsubsec}{#2.#3.#4.#5}{#1}}
+\def\plainsubsubsecheading#1{\sectionheading{subsubsec}{}{#1}}
 
-\def\secheading #1#2#3{\secheadingi {#2.#3\enspace #1}}
-\def\plainsecheading #1{\secheadingi {#1}}
-\def\secheadingi #1{{\advance \secheadingskip by \parskip %
-\secheadingbreak}%
-{\secfonts \vbox{\hyphenpenalty=10000\tolerance=5000
-                 \parindent=0pt\raggedright
-                 \rm #1\hfill}}%
-\ifdim \parskip<10pt \kern 10pt\kern -\parskip\fi \penalty 10000 }
-
-
-% Subsection fonts are the base font at magstep1,
-% which produces a size of 12 points.
-
-\def\subsecheading #1#2#3#4{\subsecheadingi {#2.#3.#4\enspace #1}}
-\def\subsecheadingi #1{{\advance \subsecheadingskip by \parskip %
-\subsecheadingbreak}%
-{\subsecfonts \vbox{\hyphenpenalty=10000\tolerance=5000
-                     \parindent=0pt\raggedright
-                     \rm #1\hfill}}%
-\ifdim \parskip<10pt \kern 10pt\kern -\parskip\fi \penalty 10000 }
-
-\def\subsubsecfonts{\subsecfonts} % Maybe this should change:
-				  % Perhaps make sssec fonts scaled
-				  % magstep half
-\def\subsubsecheading #1#2#3#4#5{\subsubsecheadingi {#2.#3.#4.#5\enspace #1}}
-\def\subsubsecheadingi #1{{\advance \subsecheadingskip by \parskip %
-\subsecheadingbreak}%
-{\subsubsecfonts \vbox{\hyphenpenalty=10000\tolerance=5000
-                       \parindent=0pt\raggedright
-                       \rm #1\hfill}}%
-\ifdim \parskip<10pt \kern 10pt\kern -\parskip\fi \penalty 10000}
 
+% Print any size section title.
+%
+% #1 is the section type (sec/subsec/subsubsec), #2 is the section
+% number (maybe empty), #3 the text.
+\def\sectionheading#1#2#3{%
+  {%
+    \expandafter\advance\csname #1headingskip\endcsname by \parskip
+    \csname #1headingbreak\endcsname
+  }%
+  {%
+    % Switch to the right set of fonts.
+    \csname #1fonts\endcsname \rm
+    %
+    % Only insert the separating space if we have a section number.
+    \def\secnum{#2}%
+    \setbox0 = \hbox{#2\ifx\secnum\empty\else\enspace\fi}%
+    %
+    \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
+          \hangindent = \wd0 % zero if no section number
+          \unhbox0 #3}%
+  }%
+  \ifdim\parskip<10pt \nobreak\kern10pt\nobreak\kern-\parskip\fi \nobreak
+}
 
-\message{toc printing,}
 
+\message{toc printing,}
 % Finish up the main text and prepare to read what we've written
 % to \contentsfile.
@@ -2825,14 +3195,19 @@ July\or August\or September\or October\o
 \newskip\contentsrightmargin \contentsrightmargin=1in
 \def\startcontents#1{%
-   \pagealignmacro
+   % If @setchapternewpage on, and @headings double, the contents should
+   % start on an odd page, unlike chapters.  Thus, we maintain
+   % \contentsalignmacro in parallel with \pagealignmacro.
+   % From: Torbjorn Granlund <tege@matematik.su.se>
+   \contentsalignmacro
    \immediate\closeout \contentsfile
    \ifnum \pageno>0
-      \pageno = -1		% Request roman numbered pages.
+      \pageno = -1              % Request roman numbered pages.
    \fi
    % Don't need to put `Contents' or `Short Contents' in the headline.
    % It is abundantly clear what they are.
    \unnumbchapmacro{#1}\def\thischapter{}%
-   \begingroup   		% Set up to handle contents files properly.
+   \begingroup                  % Set up to handle contents files properly.
       \catcode`\\=0  \catcode`\{=1  \catcode`\}=2  \catcode`\@=11
+      \catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
       \raggedbottom             % Worry more about breakpoints than the bottom.
       \advance\hsize by -\contentsrightmargin % Don't use the full line length.
@@ -2858,4 +3233,5 @@ July\or August\or September\or October\o
       \let\rm=\shortcontrm \let\bf=\shortcontbf \let\sl=\shortcontsl
       \rm
+      \hyphenpenalty = 10000
       \advance\baselineskip by 1pt % Open it up a little.
       \def\secentry ##1##2##3##4{}
@@ -2901,5 +3277,5 @@ July\or August\or September\or October\o
   % widest letter (M) is 1em, at least in the Computer Modern fonts.
   % (This space doesn't include the extra space that gets added after
-  % the label; that gets put in in \shortchapentry above.)
+  % the label; that gets put in by \shortchapentry above.)
   \advance\dimen0 by 1.1em
   \hbox to \dimen0{#1\hfil}%
@@ -2922,5 +3298,4 @@ July\or August\or September\or October\o
 \def\unnumbsubsubsecentry#1#2{\dosubsubsecentry{#1}{#2}}
 
-
 % This parameter controls the indentation of the various levels.
 \newdimen\tocindent \tocindent = 3pc
@@ -2929,13 +3304,13 @@ July\or August\or September\or October\o
 % page number.
 %
-% If the toc has to be broken over pages, we would want to be at chapters
+% If the toc has to be broken over pages, we want it to be at chapters
 % if at all possible; hence the \penalty.
 \def\dochapentry#1#2{%
-   \penalty-300 \vskip\baselineskip
+   \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
    \begingroup
      \chapentryfonts
      \tocentry{#1}{\dopageno{#2}}%
    \endgroup
-   \nobreak\vskip .25\baselineskip
+   \nobreak\vskip .25\baselineskip plus.1\baselineskip
 }
 
@@ -2960,7 +3335,8 @@ July\or August\or September\or October\o
 % of hyphenated-identifiers-that-do-not-fit-on-a-line-and-nothing-else.)
 %
+% \turnoffactive is for the sake of @" used for umlauts.
 \def\tocentry#1#2{\begingroup
-  \hyphenpenalty = 10000
-  \entry{#1}{#2}%
+  \vskip 0pt plus1pt % allow a little stretch for the sake of nice page breaks
+  \entry{\turnoffactive #1}{\turnoffactive #2}%
 \endgroup}
 
@@ -2986,6 +3362,4 @@ July\or August\or September\or October\o
 \newbox\equivbox       \newbox\errorbox
 
-\let\ptexequiv = \equiv
-
 %{\tentt
 %\global\setbox\dblarrowbox = \hbox to 1em{\hfil$\Rightarrow$\hfil}
@@ -2998,10 +3372,9 @@ July\or August\or September\or October\o
 %}
 
+% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
 \def\point{$\star$}
-
 \def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
 \def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}}
 \def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
-
 \def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}}
 
@@ -3035,5 +3408,5 @@ July\or August\or September\or October\o
 \catcode `\^=7 \catcode `\_=8 \catcode `\~=13 \let~=\tie
 \catcode `\%=14
-\catcode 43=12
+\catcode 43=12 % plus
 \catcode`\"=12
 \catcode`\==12
@@ -3043,5 +3416,5 @@ July\or August\or September\or October\o
 \escapechar=`\\
 %
-\let\~=\ptextilde
+\let\,=\ptexcomma
 \let\{=\ptexlbrace
 \let\}=\ptexrbrace
@@ -3049,8 +3422,9 @@ July\or August\or September\or October\o
 \let\*=\ptexstar
 \let\dots=\ptexdots
+\def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
+\def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
 \def\@{@}%
 \let\bullet=\ptexbullet
-\let\b=\ptexb \let\c=\ptexc \let\i=\ptexi \let\t=\ptext \let\l=\ptexl
-\let\L=\ptexL
+\let\b=\ptexb \let\c=\ptexc \let\i=\ptexi \let\t=\ptext
 %
 \let\Etex=\endgroup}
@@ -3111,9 +3485,9 @@ July\or August\or September\or October\o
 \def\cbr{{\hskip 6pt\circle\char'011}}
 \def\carttop{\hbox to \cartouter{\hskip\lskip
-	\ctl\leaders\hrule height\circthick\hfil\ctr
-	\hskip\rskip}}
+        \ctl\leaders\hrule height\circthick\hfil\ctr
+        \hskip\rskip}}
 \def\cartbot{\hbox to \cartouter{\hskip\lskip
-	\cbl\leaders\hrule height\circthick\hfil\cbr
-	\hskip\rskip}}
+        \cbl\leaders\hrule height\circthick\hfil\cbr
+        \hskip\rskip}}
 %
 \newskip\lskip\newskip\rskip
@@ -3121,38 +3495,38 @@ July\or August\or September\or October\o
 \long\def\cartouche{%
 \begingroup
-	\lskip=\leftskip \rskip=\rightskip
-	\leftskip=0pt\rightskip=0pt %we want these *outside*.
-	\cartinner=\hsize \advance\cartinner by-\lskip
-		 	  \advance\cartinner by-\rskip
-	\cartouter=\hsize
-	\advance\cartouter by 18pt % allow for 3pt kerns on either
-%				     side, and for 6pt waste from
-%				     each corner char
-	\normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
-	% Flag to tell @lisp, etc., not to narrow margin.
-	\let\nonarrowing=\comment
-	\vbox\bgroup
-		\baselineskip=0pt\parskip=0pt\lineskip=0pt
-		\carttop
-		\hbox\bgroup
-			\hskip\lskip
-			\vrule\kern3pt
-			\vbox\bgroup
-				\hsize=\cartinner
-				\kern3pt
-				\begingroup
-					\baselineskip=\normbskip
-					\lineskip=\normlskip
-					\parskip=\normpskip
-					\vskip -\parskip
+        \lskip=\leftskip \rskip=\rightskip
+        \leftskip=0pt\rightskip=0pt %we want these *outside*.
+        \cartinner=\hsize \advance\cartinner by-\lskip
+                          \advance\cartinner by-\rskip
+        \cartouter=\hsize
+        \advance\cartouter by 18pt % allow for 3pt kerns on either
+%                                    side, and for 6pt waste from
+%                                    each corner char
+        \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
+        % Flag to tell @lisp, etc., not to narrow margin.
+        \let\nonarrowing=\comment
+        \vbox\bgroup
+                \baselineskip=0pt\parskip=0pt\lineskip=0pt
+                \carttop
+                \hbox\bgroup
+                        \hskip\lskip
+                        \vrule\kern3pt
+                        \vbox\bgroup
+                                \hsize=\cartinner
+                                \kern3pt
+                                \begingroup
+                                        \baselineskip=\normbskip
+                                        \lineskip=\normlskip
+                                        \parskip=\normpskip
+                                        \vskip -\parskip
 \def\Ecartouche{%
-				\endgroup
-				\kern3pt
-			\egroup
-			\kern3pt\vrule
-			\hskip\rskip
-		\egroup
-		\cartbot
-	\egroup
+                                \endgroup
+                                \kern3pt
+                        \egroup
+                        \kern3pt\vrule
+                        \hskip\rskip
+                \egroup
+                \cartbot
+        \egroup
 \endgroup
 }}
@@ -3217,6 +3591,5 @@ July\or August\or September\or October\o
   \let\Esmallexample = \nonfillfinish
   %
-  % Smaller interline space and fonts for small examples.
-  \setleading{10pt}%
+  % Smaller fonts for small examples.
   \indexfonts \tt
   \rawbackslash % make \ output the \ character from the current font (tt)
@@ -3307,9 +3680,13 @@ July\or August\or September\or October\o
 \gdef\functionparens{\boldbrax\let&=\amprm\parencount=0 }
 \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
+% This is used to turn on special parens
+% but make & act ordinary (given that it's active).
+\gdef\boldbraxnoamp{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb\let&=\ampnr}
 
 % Definitions of (, ) and & used in args for functions.
 % This is the definition of ( outside of all parentheses.
-\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested %
-\global\advance\parencount by 1 }
+\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested
+  \global\advance\parencount by 1
+}
 %
 % This is the definition of ( when already inside a level of parens.
@@ -3317,7 +3694,7 @@ July\or August\or September\or October\o
 %
 \gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0.
-% also in that case restore the outer-level definition of (.
-\ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi
-\global\advance \parencount by -1 }
+  % also in that case restore the outer-level definition of (.
+  \ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi
+  \global\advance \parencount by -1 }
 % If we encounter &foo, then turn on ()-hacking afterwards
 \gdef\amprm#1 {{\rm\&#1}\let(=\oprm \let)=\clrm\ }
@@ -3327,6 +3704,9 @@ July\or August\or September\or October\o
 %% These parens (in \boldbrax) actually are a little bolder than the
 %% contained text.  This is especially needed for [ and ]
-\def\opnr{{\sf\char`\(}} \def\clnr{{\sf\char`\)}} \def\ampnr{\&}
-\def\lbrb{{\bf\char`\[}} \def\rbrb{{\bf\char`\]}}
+\def\opnr{{\sf\char`\(}\global\advance\parencount by 1 }
+\def\clnr{{\sf\char`\)}\global\advance\parencount by -1 }
+\def\ampnr{\&}
+\def\lbrb{{\bf\char`\[}}
+\def\rbrb{{\bf\char`\]}}
 
 % First, defname, which formats the header line itself.
@@ -3421,5 +3801,5 @@ July\or August\or September\or October\o
 % This is used for \def{tp,vr}parsebody.  It could probably be used for
 % some of the others, too, with some judicious conditionals.
-% 
+%
 \def\parsebodycommon#1#2#3{%
   \begingroup\inENV %
@@ -3455,15 +3835,14 @@ July\or August\or September\or October\o
 
 % Fine, but then we have to eventually remove the \empty *and* the
-% braces (if any).  That's what this does, putting the result in \tptemp.
-% 
-\def\removeemptybraces\empty#1\relax{\def\tptemp{#1}}%
+% braces (if any).  That's what this does.
+%
+\def\removeemptybraces\empty#1\relax{#1}
 
 % After \spacesplit has done its work, this is called -- #1 is the final
 % thing to call, #2 the type name (which starts with \empty), and #3
 % (which might be empty) the arguments.
-% 
+%
 \def\parsetpheaderline#1#2#3{%
-  \removeemptybraces#2\relax
-  #1{\tptemp}{#3}%
+  #1{\removeemptybraces#2\relax}{#3}%
 }%
 
@@ -3506,5 +3885,5 @@ July\or August\or September\or October\o
 #1%
 \hyphenchar\tensl=45
-\ifnum\parencount=0 \else \errmessage{unbalanced parens in @def arguments}\fi%
+\ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi%
 \interlinepenalty=10000
 \advance\rightskip by 0pt plus 1fil
@@ -3515,5 +3894,6 @@ July\or August\or September\or October\o
 % Expand, preventing hyphenation at `-' chars.
 % Note that groups don't affect changes in \hyphenchar.
-\functionparens
+% Use \boldbraxnoamp, not \functionparens, so that & is not special.
+\boldbraxnoamp
 \tclose{#1}% avoid \code because of side effects on active chars
 \interlinepenalty=10000
@@ -3552,5 +3932,5 @@ July\or August\or September\or October\o
 \def\deftypefunheaderx #1#2 #3\relax{%
 \doind {fn}{\code{#2}}% Make entry in function index
-\begingroup\defname {\code{#1} #2}{Function}%
+\begingroup\defname {\defheaderxcond#1\relax$$$#2}{Function}%
 \deftypefunargs {#3}\endgroup %
 \catcode 61=\other % Turn off change made in \defparsebody
@@ -3561,4 +3941,8 @@ July\or August\or September\or October\o
 \def\deftypefn{\defmethparsebody\Edeftypefn\deftypefnx\deftypefnheader}
 
+% \defheaderxcond#1\relax$$$
+% puts #1 in @code, followed by a space, but does nothing if #1 is null.
+\def\defheaderxcond#1#2$$${\ifx#1\relax\else\code{#1#2} \fi}
+
 % #1 is the classification.  #2 is the data type.  #3 is the name and args.
 \def\deftypefnheader #1#2#3{\deftypefnheaderx{#1}{#2}#3 \relax}
@@ -3569,5 +3953,5 @@ July\or August\or September\or October\o
 \normalparens % notably, turn off `&' magic, which prevents
 %               at least some C++ text from working
-\defname {\code{#2} #3}{#1}%
+\defname {\defheaderxcond#2\relax$$$#3}{#1}%
 \deftypefunargs {#4}\endgroup %
 \catcode 61=\other % Turn off change made in \defparsebody
@@ -3602,4 +3986,5 @@ July\or August\or September\or October\o
 \def\defspecx #1 {\errmessage{@defspecx in invalid context}}
 \def\deftypefnx #1 {\errmessage{@deftypefnx in invalid context}}
+\def\deftypemethodx #1 {\errmessage{@deftypemethodx in invalid context}}
 \def\deftypeunx #1 {\errmessage{@deftypeunx in invalid context}}
 
@@ -3617,4 +4002,14 @@ July\or August\or September\or October\o
 }
 
+% @deftypemethod foo-class return-type foo-method args
+%
+\def\deftypemethod{%
+  \defmethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader}
+%
+% #1 is the class name, #2 the data type, #3 the method name, #4 the args.
+\def\deftypemethodheader#1#2#3#4{%
+  \deftypefnheaderx{Method on #1}{#2}#3 #4\relax
+}
+
 % @defmethod == @defop Method
 
@@ -3694,11 +4089,13 @@ July\or August\or September\or October\o
 \def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader}
 
-% #1 is the data type.  #2 is the name.
+% #1 is the data type.  #2 is the name, perhaps followed by text that
+% is actually part of the data type, which should not be put into the index.
 \def\deftypevarheader #1#2{%
-\doind {vr}{\code{#2}}% Make entry in variables index
-\begingroup\defname {\code{#1} #2}{Variable}%
+\dovarind#2 \relax% Make entry in variables index
+\begingroup\defname {\defheaderxcond#1\relax$$$#2}{Variable}%
 \interlinepenalty=10000
 \endgraf\penalty 10000\vskip -\parskip\penalty 10000
 \endgroup}
+\def\dovarind#1 #2\relax{\doind{vr}{\code{#1}}}
 
 % @deftypevr {Global Flag} int enable
@@ -3706,6 +4103,6 @@ July\or August\or September\or October\o
 \def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader}
 
-\def\deftypevrheader #1#2#3{\doind {vr}{\code{#3}}%
-\begingroup\defname {\code{#2} #3}{#1}
+\def\deftypevrheader #1#2#3{\dovarind#3 \relax%
+\begingroup\defname {\defheaderxcond#2\relax$$$#3}{#1}
 \interlinepenalty=10000
 \endgraf\penalty 10000\vskip -\parskip\penalty 10000
@@ -3738,4 +4135,5 @@ July\or August\or September\or October\o
 \def\deftpx #1 {\errmessage{@deftpx in invalid context}}
 
+
 \message{cross reference,}
 % Define cross-reference macros
@@ -3745,4 +4143,9 @@ July\or August\or September\or October\o
 \newif\ifwarnedxrefs  % True if we warned once that they aren't known.
 
+% @inforef is simple.
+\def\inforef #1{\inforefzzz #1,,,,**}
+\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
+  node \samp{\ignorespaces#1{}}}
+
 % \setref{foo} defines a cross-reference point named foo.
 
@@ -3778,5 +4181,8 @@ July\or August\or September\or October\o
   \ifdim \wd0 = 0pt
     % No printed node name was explicitly given.
-    \ifx\SETxref-automatic-section-title\relax %
+    \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax
+      % Use the node name inside the square brackets.
+      \def\printednodename{\ignorespaces #1}%
+    \else
       % Use the actual chapter/section title appear inside
       % the square brackets.  Use the real section title if we have it.
@@ -3787,5 +4193,5 @@ July\or August\or September\or October\o
         \ifhavexrefs
           % We know the real title if we have the xref values.
-          \def\printednodename{\refx{#1-title}}%
+          \def\printednodename{\refx{#1-title}{}}%
         \else
           % Otherwise just copy the Info node name.
@@ -3793,8 +4199,4 @@ July\or August\or September\or October\o
         \fi%
       \fi
-      \def\printednodename{#1-title}%
-    \else
-      % Use the node name inside the square brackets.
-      \def\printednodename{\ignorespaces #1}%
     \fi
   \fi
@@ -3824,5 +4226,5 @@ July\or August\or September\or October\o
 % Use \turnoffactive so that punctuation chars such as underscore
 % work in node names.
-\def\dosetq #1#2{{\let\folio=0 \turnoffactive%
+\def\dosetq #1#2{{\let\folio=0 \turnoffactive
 \edef\next{\write\auxfile{\internalsetq {#1}{#2}}}%
 \next}}
@@ -3893,81 +4295,99 @@ July\or August\or September\or October\o
 }
 
-% Read the last existing aux file, if any.  No error if none exists.
-
 % This is the macro invoked by entries in the aux file.
-\def\xrdef #1#2{
-{\catcode`\'=\other\expandafter \gdef \csname X#1\endcsname {#2}}}
+\def\xrdef #1#2{{%
+  \catcode`\'=\other
+  \expandafter\gdef\csname X#1\endcsname{#2}%
+}}
 
-\def\readauxfile{%
-\begingroup
-\catcode `\^^@=\other
-\catcode `\
=\other
-\catcode `\=\other
-\catcode `\^^C=\other
-\catcode `\^^D=\other
-\catcode `\^^E=\other
-\catcode `\^^F=\other
-\catcode `\^^G=\other
-\catcode `\^^H=\other
-\catcode `\=\other
-\catcode `\^^L=\other
-\catcode `\=\other
-\catcode `\=\other
-\catcode `\=\other
-\catcode `\=\other
-\catcode `\=\other
-\catcode `\=\other
-\catcode `\=\other
-\catcode `\=\other
-\catcode `\=\other
-\catcode `\=\other
-\catcode `\=\other
-\catcode `\=\other
-\catcode 26=\other
-\catcode `\^^[=\other
-\catcode `\^^\=\other
-\catcode `\^^]=\other
-\catcode `\^^^=\other
-\catcode `\^^_=\other
-\catcode `\@=\other
-\catcode `\^=\other
-\catcode `\~=\other
-\catcode `\[=\other
-\catcode `\]=\other
-\catcode`\"=\other
-\catcode`\_=\other
-\catcode`\|=\other
-\catcode`\<=\other
-\catcode`\>=\other
-\catcode `\$=\other
-\catcode `\#=\other
-\catcode `\&=\other
-% `\+ does not work, so use 43.
-\catcode 43=\other
-% Make the characters 128-255 be printing characters
-{%
-  \count 1=128
-  \def\loop{%
-    \catcode\count 1=\other
-    \advance\count 1 by 1
-    \ifnum \count 1<256 \loop \fi
+% Read the last existing aux file, if any.  No error if none exists.
+\def\readauxfile{\begingroup
+  \catcode`\^^@=\other
+  \catcode`\
=\other
+  \catcode`\=\other
+  \catcode`\^^C=\other
+  \catcode`\^^D=\other
+  \catcode`\^^E=\other
+  \catcode`\^^F=\other
+  \catcode`\^^G=\other
+  \catcode`\^^H=\other
+  \catcode`\=\other
+  \catcode`\^^L=\other
+  \catcode`\=\other
+  \catcode`\=\other
+  \catcode`\=\other
+  \catcode`\=\other
+  \catcode`\=\other
+  \catcode`\=\other
+  \catcode`\=\other
+  \catcode`\=\other
+  \catcode`\=\other
+  \catcode`\=\other
+  \catcode`\=\other
+  \catcode`\=\other
+  \catcode26=\other
+  \catcode`\^^[=\other
+  \catcode`\^^\=\other
+  \catcode`\^^]=\other
+  \catcode`\^^^=\other
+  \catcode`\^^_=\other
+  \catcode`\@=\other
+  \catcode`\^=\other
+  % It was suggested to define this as 7, which would allow ^^e4 etc.
+  % in xref tags, i.e., node names.  But since ^^e4 notation isn't
+  % supported in the main text, it doesn't seem desirable.  Furthermore,
+  % that is not enough: for node names that actually contain a ^
+  % character, we would end up writing a line like this: 'xrdef {'hat
+  % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
+  % argument, and \hat is not an expandable control sequence.  It could
+  % all be worked out, but why?  Either we support ^^ or we don't.
+  %
+  % The other change necessary for this was to define \auxhat:
+  % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
+  % and then to call \auxhat in \setq.
+  %
+  \catcode`\~=\other
+  \catcode`\[=\other
+  \catcode`\]=\other
+  \catcode`\"=\other
+  \catcode`\_=\other
+  \catcode`\|=\other
+  \catcode`\<=\other
+  \catcode`\>=\other
+  \catcode`\$=\other
+  \catcode`\#=\other
+  \catcode`\&=\other
+  % `\+ does not work, so use 43.
+  \catcode43=\other
+  % Make the characters 128-255 be printing characters
+  {%
+    \count 1=128
+    \def\loop{%
+      \catcode\count 1=\other
+      \advance\count 1 by 1
+      \ifnum \count 1<256 \loop \fi
+    }%
   }%
-}%
-% the aux file uses ' as the escape.
-% Turn off \ as an escape so we do not lose on
-% entries which were dumped with control sequences in their names.
-% For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^
-% Reference to such entries still does not work the way one would wish,
-% but at least they do not bomb out when the aux file is read in.
-\catcode `\{=1 \catcode `\}=2
-\catcode `\%=\other
-\catcode `\'=0
-\catcode `\\=\other
-\openin 1 \jobname.aux
-\ifeof 1 \else \closein 1 \input \jobname.aux \global\havexrefstrue
-\global\warnedobstrue
-\fi
-% Open the new aux file.  Tex will close it automatically at exit.
-\openout \auxfile=\jobname.aux
+  % The aux file uses ' as the escape (for now).
+  % Turn off \ as an escape so we do not lose on
+  % entries which were dumped with control sequences in their names.
+  % For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^
+  % Reference to such entries still does not work the way one would wish,
+  % but at least they do not bomb out when the aux file is read in.
+  \catcode`\{=1
+  \catcode`\}=2
+  \catcode`\%=\other
+  \catcode`\'=0
+  \catcode`\\=\other
+  %
+  \openin 1 \jobname.aux
+  \ifeof 1 \else
+    \closein 1
+    \input \jobname.aux
+    \global\havexrefstrue
+    \global\warnedobstrue
+  \fi
+  % Open the new aux file.  TeX will close it automatically at exit.
+  \openout\auxfile=\jobname.aux
 \endgroup}
 
@@ -3980,5 +4400,6 @@ July\or August\or September\or October\o
 % vital for proper filling; pages come out unaligned when you do a
 % pagealignmacro call if that space before the closing brace is
-% removed.
+% removed. (Generally, numeric constants should always be followed by a
+% space to prevent strange expansion errors.)
 \def\supereject{\par\penalty -20000\footnoteno =0 }
 
@@ -4009,5 +4430,9 @@ July\or August\or September\or October\o
 % footnote text as a parameter.  Our footnotes don't need to be so general.
 %
-\long\gdef\footnotezzz#1{\insert\footins{%
+% Oh yes, they do; otherwise, @ifset and anything else that uses
+% \parseargline fail inside footnotes because the tokens are fixed when
+% the footnote is read.  --karl, 16nov96.
+%
+\long\gdef\footnotezzz{\insert\footins\bgroup
   % We want to typeset this text as a normal paragraph, even if the
   % footnote reference occurs in (for example) a display environment.
@@ -4031,6 +4456,11 @@ July\or August\or September\or October\o
   % provide a place where TeX can split the footnote.
   \footstrut
-  #1\strut}%
+  \futurelet\next\fo@t
 }
+\def\fo@t{\ifcat\bgroup\noexpand\next \let\next\f@@t
+  \else\let\next\f@t\fi \next}
+\def\f@@t{\bgroup\aftergroup\@foot\let\next}
+\def\f@t#1{#1\@foot}
+\def\@foot{\strut\egroup}
 
 }%end \catcode `\@=11
@@ -4105,11 +4535,16 @@ July\or August\or September\or October\o
 % Set some numeric style parameters, for 8.5 x 11 format.
 
-%\hsize = 6.5in
+\hsize = 6in
+\hoffset = .25in
 \newdimen\defaultparindent \defaultparindent = 15pt
 \parindent = \defaultparindent
-\parskip 18pt plus 1pt
-\setleading{15pt}
+\parskip 3pt plus 2pt minus 1pt
+\setleading{13.2pt}
 \advance\topskip by 1.2cm
 
+\chapheadingskip = 15pt plus 4pt minus 2pt
+\secheadingskip = 12pt plus 3pt minus 2pt
+\subsecheadingskip = 9pt plus 2pt minus 2pt
+
 % Prevent underfull vbox error messages.
 \vbadness=10000
@@ -4134,28 +4569,26 @@ July\or August\or September\or October\o
 % Use @smallbook to reset parameters for 7x9.5 format  (or else 7x9.25)
 \def\smallbook{
-
-% These values for secheadingskip and subsecheadingskip are
-% experiments.  RJC 7 Aug 1992
-\global\secheadingskip = 17pt plus 6pt minus 3pt
-\global\subsecheadingskip = 14pt plus 6pt minus 3pt
-
-\global\lispnarrowing = 0.3in
-\setleading{12pt}
-\advance\topskip by -1cm
-\global\parskip 3pt plus 1pt
-\global\hsize = 5in
-\global\vsize=7.5in
-\global\tolerance=700
-\global\hfuzz=1pt
-\global\contentsrightmargin=0pt
-\global\deftypemargin=0pt
-\global\defbodyindent=.5cm
-
-\global\pagewidth=\hsize
-\global\pageheight=\vsize
-
-\global\let\smalllisp=\smalllispx
-\global\let\smallexample=\smalllispx
-\global\def\Esmallexample{\Esmalllisp}
+  \global\chapheadingskip = 15pt plus 4pt minus 2pt
+  \global\secheadingskip = 12pt plus 3pt minus 2pt
+  \global\subsecheadingskip = 9pt plus 2pt minus 2pt
+  %
+  \global\lispnarrowing = 0.3in
+  \setleading{12pt}
+  \advance\topskip by -1cm
+  \global\parskip 2pt plus 1pt
+  \global\hsize = 5in
+  \global\vsize=7.5in
+  \global\tolerance=700
+  \global\hfuzz=1pt
+  \global\contentsrightmargin=0pt
+  \global\deftypemargin=0pt
+  \global\defbodyindent=.5cm
+  %
+  \global\pagewidth=\hsize
+  \global\pageheight=\vsize
+  %
+  \global\let\smalllisp=\smalllispx
+  \global\let\smallexample=\smalllispx
+  \global\def\Esmallexample{\Esmalllisp}
 }
 
@@ -4180,10 +4613,17 @@ July\or August\or September\or October\o
 }
 
+\bindingoffset=0pt
+\normaloffset=\hoffset
+\pagewidth=\hsize
+\pageheight=\vsize
+
 % Allow control of the text dimensions.  Parameters in order: textheight;
-% textwidth; \voffset; \hoffset (!); binding offset.  All require a dimension;
+% textwidth; voffset; hoffset; binding offset; topskip.
+% All require a dimension;
 % header is additional; added length extends the bottom of the page.
 
-\def\changepagesizes#1#2#3#4#5
-{\global\vsize= #1
+\def\changepagesizes#1#2#3#4#5#6{
+ \global\vsize= #1
+ \global\topskip= #6
  \advance\vsize by \topskip
  \global\voffset= #3
@@ -4198,7 +4638,18 @@ July\or August\or September\or October\o
  \global\bindingoffset= #5}
 
-% This layout is compatible with Latex on A4 paper.
-
-\def\afourlatex{\changepagesizes{22cm}{15cm}{7mm}{4.6mm}{5mm}}
+% A specific text layout, 24x15cm overall, intended for A4 paper.  Top margin
+% 29mm, hence bottom margin 28mm, nominal side margin 3cm.
+\def\afourlatex
+        {\global\tolerance=700
+        \global\hfuzz=1pt
+        \setleading{12pt}
+        \global\parskip 15pt plus 1pt
+        \advance\baselineskip by 1.6pt
+        \changepagesizes{237mm}{150mm}{3.6mm}{3.6mm}{3mm}{7mm}
+        }
+
+% Use @afourwide to print on European A4 paper in wide format.
+\def\afourwide{\afourpaper
+\changepagesizes{9.5in}{6.5in}{\hoffset}{\normaloffset}{\bindingoffset}{7mm}}
 
 % Define macros to output various characters with catcode for normal text.
@@ -4248,12 +4699,5 @@ July\or August\or September\or October\o
 \def_{\ifusingtt\normalunderscore\_}
 % Subroutine for the previous macro.
-\def\_{\lvvmode \kern.06em \vbox{\hrule width.3em height.1ex}}
-
-% \lvvmode is equivalent in function to \leavevmode.
-% Using \leavevmode runs into trouble when written out to
-% an index file due to the expansion of \leavevmode into ``\unhbox
-% \voidb@x'' ---which looks to TeX like ``\unhbox \voidb\x'' due to our
-% magic tricks with @.
-\def\lvvmode{\vbox to 0pt{}}
+\def\_{\leavevmode \kern.06em \vbox{\hrule width.3em height.1ex}}
 
 \catcode`\|=\active
@@ -4274,4 +4718,13 @@ July\or August\or September\or October\o
 \global\def={{\tt \char 61}}}
 
+\catcode`+=\active
+\catcode`\_=\active
+
+% If a .fmt file is being used, characters that might appear in a file
+% name cannot be active until we have parsed the command line.
+% So turn them off again, and have \everyjob (or @setfilename) turn them on.
+% \otherifyactive is called near the end of this file.
+\def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
+
 \catcode`\@=0
 
@@ -4316,4 +4769,8 @@ July\or August\or September\or October\o
 @let+=@normalplus}
 
+% Make _ and + \other characters, temporarily.
+% This is canceled by @fixbackslash.
+@otherifyactive
+
 % If a .fmt file is being used, we don't want the `\input texinfo' to show up.
 % That is what \eatinput is for; after that, the `\' should revert to printing
@@ -4326,6 +4783,9 @@ July\or August\or September\or October\o
 % the first `\{ in the file would cause an error. This macro tries to fix
 % that, assuming it is called before the first `\' could plausibly occur.
+% Also back turn on active characters that might appear in the input
+% file name, in case not using a pre-dumped format.
 %
-@gdef@fixbackslash{@ifx\@eatinput @let\ = @normalbackslash @fi}
+@gdef@fixbackslash{@ifx\@eatinput @let\ = @normalbackslash @fi
+  @catcode`+=@active @catcode`@_=@active}
 
 %% These look ok in all fonts, so just make them not special.  The @rm below