# $NetBSD: Makefile,v 1.156 2009/12/14 12:24:46 seb Exp $

.include "license.mk"

DISTNAME=	perl-5.10.1
CATEGORIES=	lang devel perl5
#PKGREVISION=	1
MASTER_SITES=	${MASTER_SITE_PERL_CPAN:S,/modules/by-module/$,/src/5.0/,}
DISTFILES+=	${DISTNAME}${EXTRACT_SUFX}

MAINTAINER=	jlam@pkgsrc.org
HOMEPAGE=	http://www.perl.org/
COMMENT=	Practical Extraction and Report Language
LICENSE=	${PERL5_LICENSE}

PKG_DESTDIR_SUPPORT=	user-destdir

CONFLICTS=	perl-base-[0-9]* perl-thread-[0-9]*			\
		p5-CGI-2.66 p5-CGI-2.75 p5-CGI-2.75.[0-2]

.include "../../mk/bsd.prefs.mk"

# Determine the Perl API version from the patchlevel.h file from the
# source distribution.
#
PERL5_API_VERS=		${PERL5_API_VERS_cmd:sh}
PERL5_API_VERS_cmd=	\
	if ${TEST} -f ${WRKSRC}/patchlevel.h; then			\
		${AWK} '/\#define[ 	]*PERL_API_REVISION/ { R = $$3 }\
			/\#define[ 	]*PERL_API_VERSION/ { r = "."$$3 } \
			/\#define[ 	]*PERL_API_SUBVERSION/ { s = "."$$3 } \
			END { printf "%s%s%s\n", R, r, s }'		\
			${WRKSRC}/patchlevel.h;				\
	else								\
		${ECHO} "unknown";					\
	fi

PERL5_PREFIX=		${PREFIX}
PERL5_VENDORPREFIX=	${PERL5_PREFIX}
PERL5_SITEPREFIX?=	${PERL5_PREFIX}
BUILD_DEFS+=		PERL5_SITEPREFIX

PERL5=			${PERL5_PREFIX}/bin/perl
PERL5_PERLBASE=		${PERL5_PREFIX}/lib/perl5
PERL5_VENDORBASE=	${PERL5_VENDORPREFIX}/lib/perl5/vendor_perl
#
# The unusual check for empty(PERL5_SITEPREFIX) is because ${PREFIX} isn't
# defined until bsd.pkg.mk is included, so when we inspect its value at
# this point, it's empty.
#
.if empty(PERL5_SITEPREFIX) || \
    !empty(PERL5_SITEPREFIX:M${LOCALBASE}) || \
    !empty(PERL5_SITEPREFIX:M${LOCALBASE}/*)
PERL5_SITEBASE=		${PERL5_SITEPREFIX}/lib/perl5/site_perl
.else
PERL5_SITEBASE=		${PERL5_SITEPREFIX}
.endif

PERL5_PRIVLIB=		${PERL5_PERLBASE}/${PERL5_API_VERS}
PERL5_VENDORLIB=	${PERL5_VENDORBASE}/${PERL5_API_VERS}
.if !empty(PERL5_SITEBASE:M*lib/perl5/site_perl)
PERL5_SITELIB=		${PERL5_SITEBASE}/${PERL5_API_VERS}
.else
PERL5_SITELIB=		${PERL5_SITEBASE}/lib/perl5/site_perl/${PERL5_API_VERS}
.endif

.include "../../mk/compiler.mk"

HAS_CONFIGURE=		yes
CONFIGURE_SCRIPT=	./Configure
CONFIGURE_ARGS+=	-sde
CONFIGURE_ARGS+=	-Darchname="${MACHINE_ARCH}-${LOWER_OPSYS}"
CONFIGURE_ARGS+=	-Dcc=${CC:Q}
CONFIGURE_ARGS+=	-Doptimize=${CFLAGS:M*:Q}
CONFIGURE_ARGS+=	-Ui_malloc
CONFIGURE_ARGS+=	-Uinstallusrbinperl
MAKE_ENV+=		LC_ALL="C"

TEST_TARGET=		test

###
### Installation directories for "perl", "vendor" and "site" bits.
###
CONFIGURE_ARGS+=	-Dinstallstyle="lib/perl5"
CONFIGURE_ARGS+=	-Dprefix=${PERL5_PREFIX:Q}
CONFIGURE_ARGS+=	-Dsiteprefix=${PERL5_SITEPREFIX:Q}
CONFIGURE_ARGS+=	-Dvendorprefix=${PERL5_VENDORPREFIX:Q}

# The Perl Configure script will install scripts into "*/script"
# directories if they exist, so override with explicit settings.
#
PERL5_SCRIPTDIR=	${PERL5_PERLBASE}/bin

CONFIGURE_ARGS+=	-Dscriptdir=${PERL5_SCRIPTDIR:Q}
CONFIGURE_ARGS+=	-Dsitescript=${PERL5_SITEBASE:Q}/bin
CONFIGURE_ARGS+=	-Dvendorscript=${PERL5_VENDORBASE:Q}/bin

# Put any compiled binaries into vendor- and site-specific locations to
# avoid conflicts with each other.  The perllink script will handle all
# the appropriate symlinking.
#
CONFIGURE_ARGS+=	-Dsitebin=${PERL5_SITEBASE:Q}/bin
CONFIGURE_ARGS+=	-Dvendorbin=${PERL5_VENDORBASE:Q}/bin

# Put the API-specific files into API-specific directories instead
# of the default version-specific directories.
#
CONFIGURE_ARGS+=	-Dprivlib=${PERL5_PRIVLIB:Q}
CONFIGURE_ARGS+=	-Dsitelib=${PERL5_SITELIB:Q}
CONFIGURE_ARGS+=	-Dvendorlib=${PERL5_VENDORLIB:Q}

# Search for version-specific directories under these directories.
CONFIGURE_ARGS+=	-Dsitelib_stem=${PERL5_SITEBASE:Q}
CONFIGURE_ARGS+=	-Dvendorlib_stem=${PERL5_VENDORBASE:Q}

# Avoid manpage conflicts between the standard Perl library, 3rd-party
# modules, and other packages.
#
PERL5_MAN1DIR=		${PERL5_PERLBASE}/${PKGMANDIR}/man1

CONFIGURE_ARGS+=	-Dman1ext="1"
CONFIGURE_ARGS+=	-Dman1dir=${PERL5_MAN1DIR:Q}
CONFIGURE_ARGS+=	-Dsiteman1dir=${PERL5_SITEBASE:Q}/${PKGMANDIR:Q}/man1
CONFIGURE_ARGS+=	-Dvendorman1dir=${PERL5_VENDORBASE:Q}/${PKGMANDIR:Q}/man1
CONFIGURE_ARGS+=	-Dman3ext="3"
CONFIGURE_ARGS+=	-Dman3dir=${PERL5_PERLBASE:Q}/${PKGMANDIR:Q}/man3
CONFIGURE_ARGS+=	-Dsiteman3dir=${PERL5_SITEBASE:Q}/${PKGMANDIR:Q}/man3
CONFIGURE_ARGS+=	-Dvendorman3dir=${PERL5_VENDORBASE:Q}/${PKGMANDIR:Q}/man3

.if ${OPSYS} == "Darwin"
#
# The Perl build attempts to work around case-insensitivity problems on
# HFS filesystems by using GNUmakefiles, so we need to use GNU make.
#
USE_TOOLS+=	gmake
.endif

#
# For the moment disable the building of a shared libperl.dylib on Darwin
# => 9.0 as it breaks the build.  This should just be considered a temporary
# work around until the actual problem can be fixed as this worked for
# Darwin < 9.0.
#
.if empty(MACHINE_PLATFORM:MDarwin-9.*-*)
CONFIGURE_ARGS+=	-Duseshrplib
.endif

# Perl embeds the full paths to the following tools in several installed
# files, so make sure the paths to the ones in ${TOOLS_DIR} aren't used.
#
USE_TOOLS+=		hostname ln sed test
CONFIGURE_ARGS+=	-Daphostname=${TOOLS_HOSTNAME_CMD:Q}
CONFIGURE_ARGS+=	-Dln=${TOOLS_LN:Q}
CONFIGURE_ARGS+=	-Dsed=${TOOLS_SED:Q}
TOOLS_ALIASES.sed+=	${TOOLS_SED:T}
CONFIGURE_ARGS+=	-Dsh=${TOOLS_SH:Q}
CONFIGURE_ARGS+=	-Dissymlink="${TOOLS_TEST} -h"
CONFIGURE_ARGS+=	-Dperl5=${FALSE}

# Nail down the needed libraries for each platform here to avoid hidden
# dependencies.  If this isn't defined, then use the perl defaults for the
# particular operating system.
#
LIBSWANTED.Darwin=	m c
LIBSWANTED.DragonFly=	m crypt
LIBSWANTED.FreeBSD=	m crypt
LIBSWANTED.IRIX=	m crypt
LIBSWANTED.Interix=	m dl
LIBSWANTED.Linux=	m crypt dl nsl
LIBSWANTED.NetBSD=	m crypt
LIBSWANTED.OpenBSD=	m crypt
LIBSWANTED.SunOS=	m crypt dl socket nsl
LIBSWANTED.AIX= 	m crypt dl socket nsl bind c
LIBSWANTED=		${LIBSWANTED.${OPSYS}}

# Nail down the directories in which the system libraries may be found.
# If this isn't defined, then use the perl defaults for the particular
# operating system.
#
SYSLIBPATH.Darwin=	/usr/lib
SYSLIBPATH.DragonFly=	/usr/lib
SYSLIBPATH.FreeBSD=	/usr/lib
SYSLIBPATH.Interix=	/usr/lib
SYSLIBPATH.NetBSD=	/usr/lib
SYSLIBPATH.OpenBSD=	/usr/lib
SYSLIBPATH.SunOS=	/usr/lib
SYSLIBPATH.AIX=		/usr/lib
SYSLIBPATH=		${SYSLIBPATH.${OPSYS}}

# Nail down the directories in which headers and libraries of
# locally-installed software may be found.
#
LOCLIBPATH=		${LOCALBASE}/lib
LOCINCPATH=		${LOCALBASE}/include

# On a.out platforms, we link with "ld" and on ELF platforms, we link with
# "cc", so we need to use different options to pass the run-time search path
# flags to the link command in the right way.
#
.if ${OBJECT_FMT} == "a.out"
LOCLIBRPATHFLAGS=	${LOCLIBPATH:S/^/${LINKER_RPATH_FLAG} /g}
.elif ${OBJECT_FMT} == "ELF" || ${OBJECT_FMT} == "XCOFF"
LOCLIBRPATHFLAGS=	${LOCLIBPATH:S/^/${COMPILER_RPATH_FLAG}/g}
.else
LOCLIBRPATHFLAGS=	# empty
.endif

.include "../../mk/dlopen.buildlink3.mk"

CHECK_BUILTIN.pthread:=	yes
.include "../../mk/pthread.builtin.mk"
CHECK_BUILTIN.pthread:=	no

# By default, build with threads only if the threads are native.
.if !empty(USE_BUILTIN.pthread:M[yY][eE][sS])
PERL5_BUILD_THREADS_SUPPORT=	yes
.else
PERL5_BUILD_THREADS_SUPPORT=	${DLOPEN_REQUIRE_PTHREADS}
.endif

### [Sat Dec 18 17:29:44 EST 2004 : jlam]
### Native threading on VAX isn't ready for primetime in NetBSD>=2.0.
### Build Perl without threads-support until VAX native threads are
### known to work.
###
.if !empty(MACHINE_PLATFORM:MNetBSD-*-vax) && \
    !empty(USE_BUILTIN.pthread:M[yY][eE][sS])
PKG_HACKS+=			broken-vax-pthreads
PERL5_BUILD_THREADS_SUPPORT=	no
.endif

.include "../../mk/compiler.mk"

PKG_OPTIONS_VAR=		PKG_OPTIONS.perl
PKG_OPTIONS_REQUIRED_GROUPS=	perlbits
PKG_OPTIONS_GROUP.perlbits=	64bitauto 64bitint 64bitmore 64bitall 64bitnone
PKG_SUPPORTED_OPTIONS=		debug threads mstats
.if !empty(PERL5_BUILD_THREADS_SUPPORT:M[yY][eE][sS])
PKG_SUGGESTED_OPTIONS=		threads
.endif

.if ${OPSYS} == "IRIX"
.  if defined(ABI) && ${ABI} == "64"
PKG_SUGGESTED_OPTIONS+=		64bitint
.  endif
.elif ${OPSYS} == "AIX"
.  if defined(ABI) && ${ABI} == "64"
PKG_SUGGESTED_OPTIONS+=		64bitall
.  else
PKG_SUGGESTED_OPTIONS+=		64bitnone
.  endif
.else
PKG_SUGGESTED_OPTIONS+=		64bitauto
.endif

.include "../../mk/bsd.options.mk"

.if !empty(PKG_OPTIONS:Mthreads)
.  include "../../mk/pthread.buildlink3.mk"
CONFIGURE_ARGS+=	-Duseithreads
CFLAGS+=		${PTHREAD_CFLAGS}
LIBSWANTED+=		${PTHREAD_LIBS:M-l*:S/^-l//}
.  if ${OBJECT_FMT} == "XCOFF"
PERL5_RPATH_THREAD=-thread
.  endif
.else
CONFIGURE_ARGS+=	-Uuseithreads
.  if ${OBJECT_FMT} == "XCOFF"
PERL5_RPATH_THREAD=
.  endif
.endif

.if !empty(PKG_OPTIONS:Mdebug)
CFLAGS+=		-DDEBUGGING
.endif

.if !empty(PKG_OPTIONS:Mmstats)
CFLAGS+=		-DPERL_DEBUGGING_MSTATS
CONFIGURE_ARGS+=	-Dusemymalloc
.else
CONFIGURE_ARGS+=	-Uusemymalloc
.endif

.if !empty(PKG_OPTIONS:M64bitint)
CONFIGURE_ARGS+=	-Duse64bitint
.if ${OBJECT_FMT} == "XCOFF"
LOCLIBRPATHFLAGS+=	${COMPILER_RPATH_FLAG}${PERL5_PRIVLIB}/${MACHINE_ARCH}-${LOWER_OPSYS}${PERL5_RPATH_THREAD}-multi-64int/CORE
.endif
.elif !empty(PKG_OPTIONS:M64bitmore)
CONFIGURE_ARGS+=	-Dusemorebits
.if ${OBJECT_FMT} == "XCOFF"
LOCLIBRPATHFLAGS+=	${COMPILER_RPATH_FLAG}${PERL5_PRIVLIB}/${MACHINE_ARCH}-${LOWER_OPSYS}${PERL5_RPATH_THREAD}-multi-64int-ld/CORE
.endif
.elif !empty(PKG_OPTIONS:M64bitall)
CONFIGURE_ARGS+=	-Duse64bitall
.if ${OBJECT_FMT} == "XCOFF"
LOCLIBRPATHFLAGS+=	${COMPILER_RPATH_FLAG}${PERL5_PRIVLIB}/${MACHINE_ARCH}-${LOWER_OPSYS}${PERL5_RPATH_THREAD}-multi-64all/CORE
.endif
.elif !empty(PKG_OPTIONS:M64bitnone)
CONFIGURE_ARGS+=	-Uuse64bitall -Uusemorebits -Uuse64bitint
.if ${OBJECT_FMT} == "XCOFF"
LOCLIBRPATHFLAGS+=	${COMPILER_RPATH_FLAG}${PERL5_PRIVLIB}/${MACHINE_ARCH}-${LOWER_OPSYS}${PERL5_RPATH_THREAD}-multi/CORE
.endif
.else
.if ${OBJECT_FMT} == "XCOFF"
BROKEN=		XCOFF targets need the path specified where libperl.a resides.\
Please choose on of 64bitint 64bitmore 64bitall or 64bitnone to allow this.
.endif
.endif

.if !empty(LIBSWANTED)
CONFIGURE_ARGS+=	-Dlibswanted=${LIBSWANTED:Q}
.endif

# Remove a spurious workdir reference
SUBST_CLASSES+=		rm
SUBST_STAGE.rm=		pre-install
SUBST_FILES.rm=		lib/Config_heavy.pl
SUBST_SED.rm=	-e "s!^rm_try='/.*/\.tools/bin/rm -f!rm_try='/bin/rm -f!"

# Replace our perl as the interpreter
REPLACE_PERL+=		lib/Class/ISA.pm
REPLACE_PERL+=		lib/File/DosGlob.pm
REPLACE_PERL+=		lib/version.pm
REPLACE_PERL+=		lib/Math/BigFloat/Trace.pm
REPLACE_PERL+=		lib/Math/BigInt/Trace.pm
REPLACE_PERL+=		lib/unicore/mktables

# And replace a perl interpreter during the pre-install stage
# I think this may be a bootstrap script, so can't use REPLACE_PERL
# because that is acted upon already in the pre-configure stage
SUBST_CLASSES+=		miniperl
SUBST_STAGE.miniperl=	pre-install
SUBST_FILES.miniperl=	lib/ExtUtils/xsubpp
SUBST_SED.miniperl=	-e "1s:\#!./miniperl:\#!${PERL5}:"

.if ${PKGSRC_COMPILER} == "xlc"
SUBST_CLASSES+=		cpprun
SUBST_STAGE.cpprun=	pre-install
SUBST_FILES.cpprun=	lib/Config_heavy.pl
.if !empty(PKG_OPTIONS:Mthreads)
SUBST_SED.cpprun=	-e "s/cpprun=''/cpprun='cc_r -E'/"
.else
SUBST_SED.cpprun=	-e "s/cpprun=''/cpprun='cc -E'/"
.endif
.endif

# Some platforms may want the directory mode not to be 0755.  This
# is, unfortunately, hardcoded in quite a few places in Perl, so
# let's substitute what pkgsrc says instead.
#
SUBST_CLASSES+=		dirmode
SUBST_STAGE.dirmode=	post-patch
SUBST_FILES.dirmode=	installhtml installman installperl		\
			lib/ExtUtils/Install.pm
SUBST_SED.dirmode=	-e "s/755/${PKGDIRMODE}/g;/umask(/d"

# It's tough to guess which hints file will be used, so add our modifications
# to all of them:
#
# - Add the pkgsrc-derived LDFLAGS for linking against pthreads to the
#   usethreads.cbu call-back script.
#
# - Generate a pkgsrc.cbu call-back script that sets the correct LDFLAGS
#   for linking against pkgsrc-installed libraries.
#
# - Explicitly set the local compiler search paths to contain only the
#   pkgsrc-controlled directories.
#
pre-configure:
.if defined(PTHREAD_LDFLAGS) && !empty(PTHREAD_LDFLAGS)
	hintdir="${WRKSRC}/hints";					\
	for hints in $${hintdir}/*.sh; do				\
		${CHMOD} +w $${hints};					\
		{ ${ECHO} "";						\
		  ${ECHO} "cat >> UU/usethreads.cbu <<'EOCBU'";		\
		  ${ECHO} "";						\
		  ${ECHO} "# Add pkgsrc-derived ldflags to link with thread support."; \
		  ${ECHO} 'ldflags="'${PTHREAD_LDFLAGS:Q}' $$ldflags"';	\
		  ${ECHO} 'lddlflags="'${PTHREAD_LDFLAGS:Q}' $$lddlflags"'; \
		  ${ECHO} "EOCBU";					\
		} >> $${hints};						\
	done
.endif
	hintdir="${WRKSRC}/hints";					\
	for hints in $${hintdir}/*.sh; do				\
		${CHMOD} +w $${hints};					\
		{ ${ECHO} "";						\
		  ${ECHO} "cat > UU/pkgsrc.cbu <<'EOCBU'";		\
		  ${ECHO} "# This script UU/pkgsrc.cbu will get 'called-back' by Configure to set"; \
		  ${ECHO} '# linker options after all other call-back scripts have been invoked.'; \
		  ${ECHO} 'ldflags="'${LOCLIBRPATHFLAGS:Q}' $$ldflags"'; \
		  ${ECHO} 'lddlflags="'${LOCLIBRPATHFLAGS:Q}' $$lddlflags"'; \
		  ${ECHO} "EOCBU";					\
		} >> $${hints};						\
	done
	hintdir="${WRKSRC}/hints";					\
	for hints in $${hintdir}/*.sh; do				\
		${CHMOD} +w $${hints};					\
		{ ${ECHO} "";						\
		  ${ECHO} "# Set pkgsrc defaults for library and header search paths."; \
		  ${ECHO} 'locincpth="'${LOCINCPATH:Q}'"';		\
		  ${ECHO} 'loclibpth="'${LOCLIBPATH:Q}'"';		\
		} >> $${hints};						\
	done
.if !empty(SYSLIBPATH)
	hintdir="${WRKSRC}/hints";					\
	for hints in $${hintdir}/*.sh; do				\
		${CHMOD} +w $${hints};					\
		${ECHO} 'glibpth="'${SYSLIBPATH:Q}'"' >> $${hints};	\
	done
.endif

post-build:
	${SED}	-e "s,@PERL5@,"${PERL5:Q}",g"				\
		-e "s,@SH@,"${SH:Q}",g"					\
		-e "s,@PKGMANDIR@,"${PKGMANDIR:Q}",g"			\
		${FILESDIR}/perllink.in > ${WRKDIR}/perllink.sh

INSTALLATION_DIRS=	bin ${PKGMANDIR}/man1
PERL5_PACKLIST_DIR_cmd=	. ${WRKSRC}/config.sh;	echo $$installarchlib
PERL5_PACKLIST_DIR=	${PERL5_PACKLIST_DIR_cmd:sh}
PERL5_PACKLIST=		.packlist
PERL5_PACKLIST_DESTDIR=	no
FILES_SUBST+=		PERL5_COMMENT=\#
FILES_SUBST+=		PERL5_PACKLIST=
PLIST_SRC=		${WRKDIR}/.PLIST_SRC

post-install: perl5-post-install

perl5-post-install:
	if ${TEST} -x ${DESTDIR}${PREFIX}/bin/a2p; then			\
		strip ${DESTDIR}${PREFIX}/bin/a2p;			\
	fi
	${INSTALL_SCRIPT} ${WRKDIR}/perllink.sh ${DESTDIR}${PERL5_SCRIPTDIR}/perllink;	\
	${INSTALL_MAN} ${FILESDIR}/perllink.1 ${DESTDIR}${PERL5_MAN1DIR}/perllink.1;	\
	${RM} -f ${DESTDIR}${PREFIX}/bin/perllink				\
		${DESTDIR}${PREFIX}/${PKGMANDIR}/man1/perllink.1;		\
	${LN} -s ${PERL5_SCRIPTDIR}/perllink ${DESTDIR}${PREFIX}/bin/perllink;	\
	${LN} -s ${PERL5_MAN1DIR}/perllink.1					\
		${DESTDIR}${PREFIX}/${PKGMANDIR}/man1/perllink.1;	\
	{ ${CAT} ${PKGDIR}/PLIST;					\
	  ${ECHO} "${PERL5_SCRIPTDIR}/perllink";			\
	  ${ECHO} "${PERL5_MAN1DIR}/perllink.1";			\
	} | ${SED} -e "s,^"${PREFIX:Q}"/,," > ${PLIST_SRC}

.include "packlist.mk"
.include "../../mk/bsd.pkg.mk"