# $NetBSD: bsd.pkg.mk,v 1.339 1999/09/15 05:39:38 rh Exp $ # # This file is in the public domain. # # This file is derived from bsd.port.mk - 940820 Jordan K. Hubbard. # # Please see the NetBSD packages(7) manual page for details on the # that variables used in this make file template. # Default sequence for "all" is: fetch checksum extract patch configure build # # Please read the comments in the targets section below, you # should be able to use the pre-* or post-* targets/scripts # (which are available for every stage except checksum) or # override the do-* targets to do pretty much anything you want. # # NEVER override the "regular" targets unless you want to open # a major can of worms. ##### Include any preferences, if not already included, and common definitions .include "../../mk/bsd.prefs.mk" ##### Define __PLATFORM_OK only if the OS matches the pkg's allowed list. .if defined(ONLY_FOR_PLATFORM) && !empty(ONLY_FOR_PLATFORM) .for __tmp__ in ${ONLY_FOR_PLATFORM} .if ${MACHINE_PLATFORM:M${__tmp__}} != "" __PLATFORM_OK?= .endif .endfor .else __PLATFORM_OK?= .endif .for __tmp__ in ${NOT_FOR_PLATFORM} .if ${MACHINE_PLATFORM:M${__tmp__}} != "" .undef __PLATFORM_OK .endif .endfor .if !defined(__PLATFORM_OK) IGNORE= "does not work on ${MACHINE_PLATFORM}" .endif ##### Some overrides of defaults below on a per-OS basis. .if (${OPSYS} == "NetBSD") LOCALBASE?= ${DESTDIR}/usr/pkg .elif (${OPSYS} == "SunOS") DEF_UMASK?= 022 X11BASE?= ${DESTDIR}/usr/openwin .elif (${OPSYS} == "OpenBSD") DEF_UMASK?= 022 NOMANCOMPRESS?= yes .elif (${OPSYS} == "Linux") DEF_UMASK?= 022 NOMANCOMPRESS?= yes .endif DEF_UMASK?= 0022 CLEANDEPENDS?= NO DEINSTALLDEPENDS?= NO # add -R to pkg_delete REINSTALL?= NO # reinstall upon update LOCALBASE?= ${DESTDIR}/usr/local X11BASE?= ${DESTDIR}/usr/X11R6 CROSSBASE?= ${LOCALBASE}/cross PKGSRCDIR= ${.CURDIR:C|/[^/]*/[^/]*$||} DISTDIR?= ${PKGSRCDIR}/distfiles _DISTDIR?= ${DISTDIR}/${DIST_SUBDIR} PACKAGES?= ${PKGSRCDIR}/packages TEMPLATES?= ${PKGSRCDIR}/templates PATCHDIR?= ${.CURDIR}/patches SCRIPTDIR?= ${.CURDIR}/scripts FILESDIR?= ${.CURDIR}/files PKGDIR?= ${.CURDIR}/pkg .if defined(USE_IMAKE) || defined(USE_MOTIF) || defined(USE_X11BASE) .if defined(USE_LOCALBASE_FOR_X11) PREFIX= ${LOCALBASE} BUILD_DEPENDS+= ${X11BASE}/lib/X11/config/xpkgwedge.def:${PKGSRCDIR}/pkgtools/xpkgwedge .else PREFIX= ${X11BASE} .endif .elif defined(USE_CROSSBASE) PREFIX= ${CROSSBASE} NO_MTREE= yes .else PREFIX= ${LOCALBASE} .endif .if defined(USE_GMAKE) BUILD_DEPENDS+= ${GMAKE}:${PKGSRCDIR}/devel/gmake MAKE_PROGRAM= ${GMAKE} GMAKE?= gmake .else MAKE_PROGRAM= ${MAKE} .endif .if defined(USE_KERBEROS) RESTRICTED?= uses Kerberos encryption code BUILD_DEFS+= KERBEROS .endif .if defined(USE_PERL5) DEPENDS+= perl-5.00404:${PKGSRCDIR}/lang/perl5 .endif .if defined(INFO_FILES) USE_GTEXINFO= yes .endif .if defined(USE_GTEXINFO) && !exists(/usr/bin/install-info) DEPENDS+= gtexinfo-3.12:${PKGSRCDIR}/devel/gtexinfo .endif .if defined(USE_MOTIF) .if exists(${X11BASE}/include/Xm/Xm.h) RUN_DEPENDS+= ${X11BASE}/include/Xm/Xm.h:${PKGSRCDIR}/x11/lesstif .else RUN_DEPENDS+= ${PREFIX}/include/Xm/Xm.h:${PKGSRCDIR}/x11/lesstif BUILD_DEPENDS+= ${PREFIX}/include/Xm/Xm.h:${PKGSRCDIR}/x11/lesstif .endif .endif .if defined(USE_LIBTOOL) .if ${OPSYS} == "NetBSD" LIBTOOL= ${LOCALBASE}/bin/pkglibtool-${OBJECT_FMT}-1.2p2 BUILD_DEPENDS+= ${LIBTOOL}:${PKGSRCDIR}/pkgtools/pkglibtool .else LIBTOOL= ${LOCALBASE}/bin/libtool BUILD_DEPENDS+= ${LIBTOOL}:${PKGSRCDIR}/devel/libtool .endif CONFIGURE_ENV+= LIBTOOL="${LIBTOOL} ${LIBTOOL_FLAGS}" MAKE_ENV+= LIBTOOL="${LIBTOOL} ${LIBTOOL_FLAGS}" .endif .if defined(USE_XAW) XAW_TYPE?= standard .if ${XAW_TYPE} == "xpm" DEPENDS+= Xaw-Xpm-1.1:${PKGSRCDIR}/x11/Xaw-Xpm .elif ${XAW_TYPE} == "3d" DEPENDS+= Xaw3d-1.5:${PKGSRCDIR}/x11/Xaw3d .endif .endif # Don't change these!!! These names are built into the _TARGET_USE macro, # there is no way to refer to them cleanly from within the macro AFAIK. EXTRACT_COOKIE= ${WRKDIR}/.extract_done CONFIGURE_COOKIE= ${WRKDIR}/.configure_done INSTALL_COOKIE= ${WRKDIR}/.install_done BUILD_COOKIE= ${WRKDIR}/.build_done PATCH_COOKIE= ${WRKDIR}/.patch_done PACKAGE_COOKIE= ${WRKDIR}/.package_done # Miscellaneous overridable commands: XMKMF?= xmkmf -a .if exists(/sbin/md5) MD5?= /sbin/md5 .elif exists(/bin/md5) MD5?= /bin/md5 .elif exists(/usr/bin/md5) MD5?= /usr/bin/md5 .elif exists(${LOCALBASE}/bsd/bin/md5) MD5?= ${LOCALBASE}/bsd/bin/md5 .else MD5?= md5 .endif MD5_FILE?= ${FILESDIR}/md5 PATCH_SUM_FILE?= ${FILESDIR}/patch-sum .if defined(USE_MOTIF) || defined(USE_X11BASE) || defined(USE_X11) LDFLAGS+= -Wl,-R${X11BASE}/lib -L${X11BASE}/lib .endif LDFLAGS+= -Wl,-R${LOCALBASE}/lib -L${LOCALBASE}/lib MAKE_ENV+= LDFLAGS="${LDFLAGS}" CONFIGURE_ENV+= LDFLAGS="${LDFLAGS}" MAKE_FLAGS?= MAKEFILE?= Makefile MAKE_ENV+= PATH=${PATH}:${LOCALBASE}/bin:${X11BASE}/bin PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} MOTIFLIB="${MOTIFLIB}" CFLAGS="${CFLAGS}" .if exists(/usr/bin/fetch) FETCH_CMD?= /usr/bin/fetch .elif exists(${LOCALBASE}/bsd/bin/ftp) FETCH_CMD?= ${LOCALBASE}/bsd/bin/ftp .else FETCH_CMD?= /usr/bin/ftp .endif # By default, distfiles have no restrictions placed on them MIRROR_DISTFILE?= yes TOUCH_FLAGS?= -f PATCH_STRIP?= -p0 PATCH_DIST_STRIP?= -p0 .if defined(PATCH_DEBUG) || defined(PKG_VERBOSE) PATCH_DEBUG_TMP= yes PATCH_ARGS?= -d ${WRKSRC} -E ${PATCH_STRIP} PATCH_DIST_ARGS?= -d ${WRKSRC} -E ${PATCH_DIST_STRIP} .else PATCH_DEBUG_TMP= no PATCH_ARGS?= -d ${WRKSRC} --forward --quiet -E ${PATCH_STRIP} PATCH_DIST_ARGS?= -d ${WRKSRC} --forward --quiet -E ${PATCH_DIST_STRIP} .endif .if defined(BATCH) PATCH_ARGS+= --batch PATCH_DIST_ARGS+= --batch .endif .if defined(PATCH_CHECK_ONLY) PATCH_ARGS+= -C PATCH_DIST_ARGS+= -C .endif # New decompress and extract definitions # If the archive has a .bz2 suffix, use bzip2 to extract information # If EXTRACT_USING_PAX is defined, use pax in preference to (GNU) tar, # and append 2 tar blocks of zero bytes on the end, in case the archive # was written with a buggy version of GNU tar. EXTRACT_SUFX?= .tar.gz .if ${EXTRACT_SUFX} == ".tar.bz2" .if exists(/usr/bin/bzcat) BZCAT= /usr/bin/bzcat .else BZCAT= ${LOCALBASE}/bin/bzcat BUILD_DEPENDS+= ${BZCAT}:${PKGSRCDIR}/archivers/bzip2 .endif # !exists bzcat DECOMPRESS_CMD?= ${BZCAT} .else DECOMPRESS_CMD?= ${GZCAT} .endif # If this is empty, then everything gets extracted. EXTRACT_ELEMENTS?= .if defined(EXTRACT_USING_PAX) EXTRACT_CMD?= (${DECOMPRESS_CMD} ${DOWNLOADED_DISTFILE} ; dd if=/dev/zero bs=10k count=2) | ${PAX} -r ${EXTRACT_ELEMENTS} .else EXTRACT_CMD?= ${DECOMPRESS_CMD} ${DOWNLOADED_DISTFILE} | ${GTAR} xf - ${EXTRACT_ELEMENTS} .endif # Figure out where the local mtree file is .if !defined(MTREE_FILE) .if defined(USE_IMAKE) || defined(USE_MOTIF) || defined(USE_X11BASE) MTREE_FILE= ${PKGSRCDIR}/mk/${OPSYS}.x11.dist .else MTREE_FILE= ${PKGSRCDIR}/mk/${OPSYS}.pkg.dist .endif .endif # ! MTREE_FILE MTREE_ARGS?= -U -f ${MTREE_FILE} -d -e -p # Debugging levels for this file, dependent on PKG_DEBUG_LEVEL definition # 0 == normal, default, quiet operation # 1 == all shell commands echoed before invocation # 2 == shell "set -x" operation PKG_DEBUG_LEVEL?= 0 _PKG_SILENT= @ _PKG_DEBUG= .if ${PKG_DEBUG_LEVEL} > 0 _PKG_SILENT= .endif .if ${PKG_DEBUG_LEVEL} > 1 _PKG_DEBUG= set -x; .endif # If WRKOBJDIR is set, use that tree to build .ifdef WRKOBJDIR __canonical_PKGSRCDIR!= cd ${PKGSRCDIR} && pwd -P __canonical_CURDIR!= cd ${.CURDIR} && pwd -P PKGSRC_SUBDIR= ${__canonical_CURDIR:S,${__canonical_PKGSRCDIR}/,,} BUILD_ROOT= ${WRKOBJDIR} BUILD_DIR?= ${WRKOBJDIR}/${PKGSRC_SUBDIR} .else BUILD_ROOT= ${PKGSRCDIR} BUILD_DIR?= ${.CURDIR} .endif # WRKOBJDIR # If OBJMACHINE is set, use ${MACHINE_ARCH} in the working directory name .ifdef OBJMACHINE WRKDIR_BASENAME?= work.${MACHINE_ARCH} .else WRKDIR_BASENAME?= work .endif .ifdef NO_WRKDIR WRKDIR?= ${BUILD_DIR} .else WRKDIR?= ${BUILD_DIR}/${WRKDIR_BASENAME} .endif # !NO_WRKDIR .if defined(NO_WRKSUBDIR) WRKSRC?= ${WRKDIR} .else # NO_WRKSUBDIR WRKSRC?= ${WRKDIR}/${DISTNAME} .endif # NO_WRKSUBDIR # A few aliases for *-install targets INSTALL_PROGRAM?= \ ${INSTALL} ${COPY} ${STRIPFLAG} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE} INSTALL_SCRIPT?= \ ${INSTALL} ${COPY} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE} INSTALL_DATA?= \ ${INSTALL} ${COPY} -o ${SHAREOWN} -g ${SHAREGRP} -m ${SHAREMODE} INSTALL_MAN?= \ ${INSTALL} ${COPY} -o ${MANOWN} -g ${MANGRP} -m ${MANMODE} INSTALL_PROGRAM_DIR?= \ ${INSTALL} -d -o ${BINOWN} -g ${BINGRP} -m ${BINMODE} INSTALL_SCRIPT_DIR?= \ ${INSTALL_PROGRAM_DIR} INSTALL_DATA_DIR?= \ ${INSTALL} -d -o ${SHAREOWN} -g ${SHAREGRP} -m ${BINMODE} INSTALL_MAN_DIR?= \ ${INSTALL} -d -o ${MANOWN} -g ${MANGRP} -m ${BINMODE} INSTALL_MACROS= BSD_INSTALL_PROGRAM="${INSTALL_PROGRAM}" \ BSD_INSTALL_SCRIPT="${INSTALL_SCRIPT}" \ BSD_INSTALL_DATA="${INSTALL_DATA}" \ BSD_INSTALL_MAN="${INSTALL_MAN}" \ BSD_INSTALL_PROGRAM_DIR="${INSTALL_PROGRAM_DIR}" \ BSD_INSTALL_SCRIPT_DIR="${INSTALL_SCRIPT_DIR}" \ BSD_INSTALL_DATA_DIR="${INSTALL_DATA_DIR}" \ BSD_INSTALL_MAN_DIR="${INSTALL_MAN_DIR}" MAKE_ENV+= ${INSTALL_MACROS} SCRIPTS_ENV+= ${INSTALL_MACROS} # The user can override the NO_PACKAGE by specifying this from # the make command line .if defined(FORCE_PACKAGE) .undef NO_PACKAGE .endif COMMENT?= ${PKGDIR}/COMMENT DESCR_SRC?= ${PKGDIR}/DESCR DESCR= ${WRKDIR}/.DESCR PLIST= ${WRKDIR}/.PLIST DLIST= ${WRKDIR}/.DLIST DDIR= ${WRKDIR}/.DDIR # Set PLIST_SUBST to substitute "${variable}" to "value" in PLIST PLIST_SUBST+= OPSYS=${OPSYS} \ OS_VERSION=${OS_VERSION} \ MACHINE_ARCH=${MACHINE_ARCH} \ MACHINE_GNU_ARCH=${MACHINE_GNU_ARCH} \ MACHINE_GNU_PLATFORM=${MACHINE_GNU_PLATFORM} \ LOWER_VENDOR=${LOWER_VENDOR} \ LOWER_OPSYS=${LOWER_OPSYS} \ PKGNAME=${PKGNAME} # Set INSTALL_FILE to be the name of any INSTALL file .if !defined(INSTALL_FILE) && exists(${PKGDIR}/INSTALL) INSTALL_FILE= ${PKGDIR}/INSTALL .endif # Set DEINSTALL_FILE to be the name of any DEINSTALL file .if !defined(DEINSTALL_FILE) && exists(${PKGDIR}/DEINSTALL) DEINSTALL_FILE= ${PKGDIR}/DEINSTALL .endif # Set REQ_FILE to be the name of any REQ file .if !defined(REQ_FILE) && exists(${PKGDIR}/REQ) REQ_FILE= ${PKGDIR}/REQ .endif # Set MESSAGE_FILE to be the name of any MESSAGE file .if !defined(MESSAGE_FILE) && exists(${PKGDIR}/MESSAGE) MESSAGE_FILE= ${PKGDIR}/MESSAGE .endif # Files to create for versioning and build information BUILD_VERSION_FILE= ${WRKDIR}/BuildVersion BUILD_INFO_FILE= ${WRKDIR}/BuildInfo .ifndef PKG_ARGS PKG_ARGS= -v -c ${COMMENT} -d ${DESCR} -f ${PLIST} -l PKG_ARGS+= -b ${BUILD_VERSION_FILE} -B ${BUILD_INFO_FILE} PKG_ARGS+= -p ${PREFIX} -P "`${MAKE} package-depends PACKAGE_DEPENDS_WITH_PATTERNS=false|sort -u`" .ifdef CONFLICTS PKG_ARGS+= -C "${CONFLICTS}" .endif .ifdef INSTALL_FILE PKG_ARGS+= -i ${INSTALL_FILE} .endif .ifdef DEINSTALL_FILE PKG_ARGS+= -k ${DEINSTALL_FILE} .endif .ifdef REQ_FILE PKG_ARGS+= -r ${REQ_FILE} .endif .ifdef MESSAGE_FILE PKG_ARGS+= -D ${MESSAGE_FILE} .endif .ifndef NO_MTREE PKG_ARGS+= -m ${MTREE_FILE} .endif .endif # !PKG_ARGS PKG_SUFX?= .tgz # where pkg_add records its dirty deeds. PKG_DBDIR?= /var/db/pkg # shared/dynamic motif libs MOTIFLIB?= -L${X11BASE}/lib -L${LOCALBASE}/lib -Wl,-R${X11BASE}/lib -Wl,-R${LOCALBASE}/lib -lXm .if (${OPSYS} == "SunOS") AWK?= /usr/bin/nawk BASENAME?= /usr/bin/basename CAT?= /usr/bin/cat CHMOD?= /usr/bin/chmod CHOWN?= /usr/bin/chown CHGRP?= /usr/bin/chgrp CP?= /usr/bin/cp CUT?= /usr/bin/cut ECHO?= /usr/ucb/echo EGREP?= /usr/xpg4/bin/egrep FALSE?= /usr/bin/false FILE?= /usr/bin/file GREP?= /usr/bin/grep GTAR?= ${LOCALBASE}/bin/gtar GUNZIP_CMD?= ${LOCALBASE}/bin/gunzip -f GZCAT?= ${LOCALBASE}/bin/zcat GZIP?= -9 GZIP_CMD?= ${LOCALBASE}/bin/gzip -nf ${GZIP} ID?= /usr/xpg4/bin/id IDENT?= ${LOCALBASE}/bin/ident LDCONFIG?= /usr/bin/true LN?= /usr/bin/ln MKDIR?= /usr/bin/mkdir -p MTREE?= ${LOCALBASE}/bsd/bin/mtree MV?= /usr/bin/mv PATCH?= ${LOCALBASE}/bin/patch -b PAX?= /bin/pax PKG_ADD?= ${LOCALBASE}/bsd/bin/pkg_add PKG_CREATE?= ${LOCALBASE}/bsd/bin/pkg_create PKG_DELETE?= ${LOCALBASE}/bsd/bin/pkg_delete PKG_INFO?= ${LOCALBASE}/bsd/bin/pkg_info RM?= /usr/bin/rm RMDIR?= /usr/bin/rmdir SED?= /usr/bin/sed SETENV?= /usr/bin/env SH?= /bin/ksh SU?= /usr/bin/su TAIL?= /usr/xpg4/bin/tail TEST?= /usr/bin/test TOUCH?= /usr/bin/touch TR?= /usr/bin/tr TRUE?= /usr/bin/true TYPE?= /usr/bin/type .elif (${OPSYS} == "Linux") AWK?= /usr/bin/awk BASENAME?= /bin/basename CAT?= /bin/cat CHMOD?= /bin/chmod CHOWN?= /usr/sbin/chown CHGRP?= /usr/bin/chgrp CP?= /bin/cp CUT?= /bin/cut ECHO?= /bin/echo EGREP?= /bin/egrep FALSE?= /bin/false FILE?= /usr/bin/file GREP?= /bin/grep GTAR?= /bin/tar GUNZIP_CMD?= /usr/bin/gunzip -f GZCAT?= /bin/zcat GZIP?= -9 GZIP_CMD?= /usr/bin/gzip -nf ${GZIP} ID?= /usr/bin/id IDENT?= /usr/bin/ident LDCONFIG?= /sbin/ldconfig LN?= /bin/ln MKDIR?= /bin/mkdir -p MTREE?= ${LOCALBASE}/bsd/bin/mtree MV?= /bin/mv PATCH?= /usr/bin/patch PAX?= /usr/local/bsd/bin/pax PKG_ADD?= ${LOCALBASE}/bsd/bin/pkg_add PKG_CREATE?= ${LOCALBASE}/bsd/bin/pkg_create PKG_DELETE?= ${LOCALBASE}/bsd/bin/pkg_delete PKG_INFO?= ${LOCALBASE}/bsd/bin/pkg_info RM?= /bin/rm RMDIR?= /bin/rmdir SED?= /bin/sed SETENV?= /usr/bin/env SH?= /bin/sh SU?= /bin/su TAIL?= /usr/bin/tail TEST?= /usr/bin/test TOUCH?= /bin/touch TR?= /usr/bin/tr TRUE?= /bin/true TYPE?= type .else AWK?= /usr/bin/awk BASENAME?= /usr/bin/basename CAT?= /bin/cat CHMOD?= /bin/chmod CHOWN?= /usr/sbin/chown CHGRP?= /usr/bin/chgrp CP?= /bin/cp CUT?= /usr/bin/cut ECHO?= /bin/echo EGREP?= /usr/bin/egrep FALSE?= /usr/bin/false FILE?= /usr/bin/file GREP?= /usr/bin/grep GTAR?= /usr/bin/tar GUNZIP_CMD?= /usr/bin/gunzip -f GZCAT?= /usr/bin/gzcat GZIP?= -9 GZIP_CMD?= /usr/bin/gzip -nf ${GZIP} ID?= /usr/bin/id IDENT?= /usr/bin/ident LDCONFIG?= /sbin/ldconfig LN?= /bin/ln MKDIR?= /bin/mkdir -p MTREE?= /usr/sbin/mtree MV?= /bin/mv PATCH?= /usr/bin/patch PAX?= /bin/pax PKG_ADD?= /usr/sbin/pkg_add PKG_CREATE?= /usr/sbin/pkg_create PKG_DELETE?= /usr/sbin/pkg_delete PKG_INFO?= /usr/sbin/pkg_info RM?= /bin/rm RMDIR?= /bin/rmdir SED?= /usr/bin/sed SETENV?= /usr/bin/env SH?= /bin/sh SU?= /usr/bin/su TAIL?= /usr/bin/tail TEST?= /bin/test TOUCH?= /usr/bin/touch TR?= /usr/bin/tr TRUE?= /usr/bin/true TYPE?= type .endif # !SunOS # Used to print all the '===>' style prompts - override this to turn them off. ECHO_MSG?= ${ECHO} # How to do nothing. Override if you, for some strange reason, would rather # do something. DO_NADA?= ${TRUE} ALL_TARGET?= all INSTALL_TARGET?= install .if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES) INSTALL_TARGET+= install.man .endif # If this host is behind a filtering firewall, use passive ftp(1) .if defined(PASSIVE_FETCH) FETCH_BEFORE_ARGS += -p .endif # Popular master sites MASTER_SITE_XCONTRIB+= \ ftp://crl.dec.com/pub/X11/contrib/ \ ftp://ftp.sunsite.auc.dk/pub/X/X.org/contrib/ \ ftp://ftp.uni-paderborn.de/pub/X11/contrib/ \ ftp://ftp.x.org/contrib/ MASTER_SITE_GNU+= \ ftp://ftp.gnu.org/pub/gnu/ \ ftp://ftp.wustl.edu/systems/gnu/ \ ftp://ftp.informatik.tu-muenchen.de/pub/comp/os/unix/gnu/ MASTER_SITE_PERL_CPAN+= \ ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/ \ ftp://ftp.cdrom.com/pub/perl/CPAN/modules/by-module/ MASTER_SITE_TEX_CTAN+= \ ftp://ftp.cdrom.com/pub/tex/ctan/ \ ftp://ftp.wustl.edu/packages/TeX/ \ ftp://ftp.funet.fi/pub/TeX/CTAN/ \ ftp://ftp.tex.ac.uk/public/ctan/tex-archive/ \ ftp://ftp.dante.de/tex-archive/ MASTER_SITE_SUNSITE+= \ ftp://sunsite.unc.edu/pub/Linux/ \ ftp://ftp.infomagic.com/pub/mirrors/linux/sunsite/ \ ftp://ftp.funet.fi/pub/mirrors/sunsite.unc.edu/pub/Linux/ MASTER_SITE_GNOME+= \ ftp://ftp.gnome.org/pub/GNOME/ \ ftp://ftp.sunet.se/pub/X11/GNOME/ \ ftp://ftp.informatik.uni-bonn.de/pub/os/unix/gnome/ \ ftp://ftp.tuwien.ac.at/hci/gnome.org/GNOME/ # Empty declaration to avoid "variable MASTER_SITES recursive" error MASTER_SITES?= PATCH_SITES?= # The primary backup site. .if defined(DIST_SUBDIR) MASTER_SITE_BACKUP?= \ ftp://ftp.netbsd.org/pub/NetBSD/packages/distfiles/${DIST_SUBDIR}/ \ ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/ .else MASTER_SITE_BACKUP?= \ ftp://ftp.netbsd.org/pub/NetBSD/packages/distfiles/ \ ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/ .endif # Where to put distfiles that don't have any other master site MASTER_SITE_LOCAL?= \ ftp://ftp.netbsd.org/pub/NetBSD/packages/distfiles/LOCAL_PORTS/ \ ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/LOCAL_PORTS/ # I guess we're in the master distribution business! :) As we gain mirror # sites for distfiles, add them to this list. .if !defined(MASTER_SITE_OVERRIDE) MASTER_SITES+= ${MASTER_SITE_BACKUP} PATCH_SITES+= ${MASTER_SITE_BACKUP} .else MASTER_SITES:= ${MASTER_SITE_OVERRIDE} ${MASTER_SITES} PATCH_SITES:= ${MASTER_SITE_OVERRIDE} ${PATCH_SITES} .endif # Derived names so that they're easily overridable. DISTFILES?= ${DISTNAME}${EXTRACT_SUFX} PKGNAME?= ${DISTNAME} # Latest version of pkgtools required for this file. PKGTOOLS_REQD= 19990909 # Check that we're using up-to-date pkg_* tools with this file. uptodate-pkgtools: ${_PKG_SILENT}${_PKG_DEBUG} \ pkgtools_version=`${MAKE} show-pkgtools-version`; \ if [ $$pkgtools_version -lt ${PKGTOOLS_REQD} ]; then \ case ${PKGNAME} in \ pkg_install-*) \ ;; \ *) \ ${ECHO} "Your package tools need to be updated to `${ECHO} ${PKGTOOLS_REQD} | ${SED} -e 's|\(....\)\(..\)\(..\)|\1/\2/\3|'` versions."; \ ${ECHO} "The installed package tools were last updated on `${ECHO} $$pkgtools_version | ${SED} -e 's|\(....\)\(..\)\(..\)|\1/\2/\3|'`."; \ ${ECHO} "Please make and install the pkgsrc/pkgtools/pkg_install package."; \ ${FALSE} ;; \ esac \ fi MAINTAINER?= packages@netbsd.org ALLFILES?= ${DISTFILES} ${PATCHFILES} CKSUMFILES?= ${ALLFILES} .for __tmp__ in ${IGNOREFILES} CKSUMFILES:= ${CKSUMFILES:N${__tmp__}} .endfor # List of all files, with ${DIST_SUBDIR} in front. Used for fetch and checksum. .if defined(DIST_SUBDIR) _CKSUMFILES?= ${CKSUMFILES:S/^/${DIST_SUBDIR}\//} _DISTFILES?= ${DISTFILES:S/^/${DIST_SUBDIR}\//} _IGNOREFILES?= ${IGNOREFILES:S/^/${DIST_SUBDIR}\//} _PATCHFILES?= ${PATCHFILES:S/^/${DIST_SUBDIR}\//} .else _CKSUMFILES?= ${CKSUMFILES} _DISTFILES?= ${DISTFILES} _IGNOREFILES?= ${IGNOREFILES} _PATCHFILES?= ${PATCHFILES} .endif # This is what is actually going to be extracted, and is overridable # by user. EXTRACT_ONLY?= ${DISTFILES} .if !defined(CATEGORIES) || !defined(DISTNAME) .BEGIN: @${ECHO_MSG} "CATEGORIES and DISTNAME are mandatory." @${FALSE} .endif .if defined(LIB_DEPENDS) .BEGIN: @${ECHO_MSG} "LIB_DEPENDS is deprecated and must be replaced with DEPENDS." @${FALSE} .endif .if defined(MASTER_SITE_SUBDIR) .BEGIN: @${ECHO_MSG} 'MASTER_SITE_SUBDIR is deprecated and must be replaced with MASTER_SITES.' @${FALSE} .endif .if defined(PATCH_SITE_SUBDIR) .BEGIN: @${ECHO_MSG} 'PATCH_SITE_SUBDIR is deprecated and must be replaced with PATCH_SITES.' @${FALSE} .endif .if defined(ONLY_FOR_ARCHS) || defined(NOT_FOR_ARCHS) \ || defined(ONLY_FOR_OPSYS) || defined(NOT_FOR_OPSYS) .BEGIN: @${ECHO_MSG} 'ONLY/NOT_FOR_ARCHS/OPSYS are deprecated and must be replaced with ONLY/NOT_FOR_PLATFORM.' @${FALSE} .endif # Note this has to start with a capital letter (or more accurately, it # shouldn't match "[a-z]*"), see the target "delete-package-links" below. PKGREPOSITORYSUBDIR?= All PKGREPOSITORY?= ${PACKAGES}/${PKGREPOSITORYSUBDIR} PKGFILE?= ${PKGREPOSITORY}/${PKGNAME}${PKG_SUFX} CONFIGURE_SCRIPT?= configure CONFIGURE_ENV+= PATH=${PATH}:${LOCALBASE}/bin:${X11BASE}/bin .if defined(GNU_CONFIGURE) CONFIGURE_ARGS+= --host=${MACHINE_GNU_PLATFORM} --prefix=${PREFIX} HAS_CONFIGURE= yes .if defined(USE_LOCALBASE_FOR_X11) CONFIGURE_ARGS+= --x-libraries=${X11BASE}/lib --x-includes=${X11BASE}/include .endif .endif # Passed to most of script invocations SCRIPTS_ENV+= CURDIR=${.CURDIR} DISTDIR=${DISTDIR} \ PATH=${PATH}:${LOCALBASE}/bin:${X11BASE}/bin \ WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} \ SCRIPTDIR=${SCRIPTDIR} FILESDIR=${FILESDIR} \ PKGSRCDIR=${PKGSRCDIR} DEPENDS="${DEPENDS}" \ PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} .if defined(BATCH) SCRIPTS_ENV+= BATCH=yes .endif .MAIN: all # Use aliases, so that all versions of English are acceptable .if defined(LICENCE) && !defined(LICENSE) LICENSE= ${LICENCE} .endif .if defined(ACCEPTABLE_LICENCES) && !defined(ACCEPTABLE_LICENSES) ACCEPTABLE_LICENSES= ${ACCEPTABLE_LICENCES} .endif ################################################################ # Many ways to disable a package. # # If we're in BATCH mode and the package is interactive, or we're # in interactive mode and the package is non-interactive, skip all # the important targets. The reason we have two modes is that # one might want to leave a build in BATCH mode running # overnight, then come back in the morning and do _only_ the # interactive ones that required your intervention. # # Don't attempt to build packages that require Motif if you don't # have Motif. # # Ignore packages that can't be resold if building for a CDROM. # # Don't build a package if it's restricted and we don't want to get # into that. # # Don't build a package if it's broken. ################################################################ .if !defined(NO_IGNORE) .if (defined(IS_INTERACTIVE) && defined(BATCH)) IGNORE= "is an interactive package" .elif (!defined(IS_INTERACTIVE) && defined(INTERACTIVE)) IGNORE= "is not an interactive package" .elif (defined(NO_CDROM) && defined(FOR_CDROM)) IGNORE= "may not be placed on a CDROM: ${NO_CDROM}" .elif (defined(RESTRICTED) && defined(NO_RESTRICTED)) IGNORE= "is restricted: ${RESTRICTED}" .elif ((defined(USE_IMAKE) || defined(USE_MOTIF) || \ defined(USE_X11BASE) || defined(USE_X11)) && \ !exists(${X11BASE})) IGNORE= "uses X11, but ${X11BASE} not found" .elif defined(BROKEN) IGNORE= "is marked as broken: ${BROKEN}" .elif defined(LICENSE) .ifdef ACCEPTABLE_LICENSES .for _lic in ${ACCEPTABLE_LICENSES} .if ${LICENSE} == "${_lic}" _ACCEPTABLE= yes .endif .endfor # _lic .endif # ACCEPTABLE_LICENSES .ifndef _ACCEPTABLE IGNORE= "Unacceptable license: ${LICENSE} - set ACCEPTABLE_LICENSES in /etc/mk.conf to include ${LICENSE} to make this package" .endif .endif .if defined(IGNORE) .if defined(IGNORE_FAIL) IGNORECMD?= ${ECHO} "===> ${PKGNAME} ${IGNORE}." && ${FALSE} .elif defined(IGNORE_SILENT) IGNORECMD?= ${DO_NADA} .endif IGNORECMD?= ${ECHO_MSG} "===> ${PKGNAME} ${IGNORE}." fetch checksum extract patch configure all build install deinstall package \ depends check-depends: @${IGNORECMD} .endif # IGNORE .endif # !NO_IGNORE # Add these defs to the ones dumped into +BUILD_DEFS BUILD_DEFS+= OPSYS OS_VERSION MACHINE_ARCH MACHINE_GNU_ARCH BUILD_DEFS+= CPPFLAGS CFLAGS LDFLAGS LICENSE BUILD_DEFS+= CONFIGURE_ENV CONFIGURE_ARGS .if !target(all) all: build .endif .if !defined(DEPENDS_TARGET) .if make(reinstall) DEPENDS_TARGET= reinstall .else DEPENDS_TARGET= install .endif .endif ################################################################ # The following are used to create easy dummy targets for # disabling some bit of default target behavior you don't want. # They still check to see if the target exists, and if so don't # do anything, since you might want to set this globally for a # group of packages in a Makefile.inc, but still be able to # override from an individual Makefile. ################################################################ # Disable checksum .if (defined(NO_CHECKSUM) && !target(checksum)) || exists(${EXTRACT_COOKIE}) checksum: fetch @${DO_NADA} .endif # Disable extract .if defined(NO_EXTRACT) && !target(extract) extract: checksum ${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${EXTRACT_COOKIE} checksum: fetch @${DO_NADA} makesum: @${DO_NADA} .endif # Disable patch .if defined(NO_PATCH) && !target(patch) patch: extract ${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${PATCH_COOKIE} .endif # Disable configure .if defined(NO_CONFIGURE) && !target(configure) configure: patch ${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${CONFIGURE_COOKIE} .endif # Disable build .if defined(NO_BUILD) && !target(build) build: configure ${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE} .endif # Disable install .if defined(NO_INSTALL) && !target(install) install: build ${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE} .endif # Disable package .if defined(NO_PACKAGE) && !target(package) package: .if defined(IGNORE_SILENT) @${DO_NADA} .else @${ECHO_MSG} "===> ${PKGNAME} may not be packaged: ${NO_PACKAGE}." .endif .endif # Disable describe .if defined(NO_DESCRIBE) && !target(describe) describe: @${DO_NADA} .endif ################################################################ # More standard targets start here. # # These are the body of the build/install framework. If you are # not happy with the default actions, and you can't solve it by # adding pre-* or post-* targets/scripts, override these. ################################################################ # Fetch _FETCH_FILE= \ if [ ! -f $$file -a ! -f $$bfile -a ! -h $$bfile ]; then \ ${ECHO_MSG} ">> $$bfile doesn't seem to exist on this system."; \ for site in $$sites; do \ ${ECHO_MSG} ">> Attempting to fetch $$bfile from $${site}."; \ if ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${bfile} ${FETCH_AFTER_ARGS}; then \ if [ -n "${FAILOVER_FETCH}" -a -f ${MD5_FILE} -a -f ${_DISTDIR}/$$bfile ]; then \ CKSUM=`${MD5} < ${_DISTDIR}/$$bfile`; \ CKSUM2=`${AWK} '$$1 == "MD5" && $$2 == "('$$file')"{print $$4;}' ${MD5_FILE}`; \ if [ "$$CKSUM" = "$$CKSUM2" -o "$$CKSUM2" = "IGNORE" ]; then \ continue 2; \ else \ ${ECHO_MSG} ">> Checksum failure - trying next site."; \ fi; \ elif [ ! -f ${_DISTDIR}/$$bfile ]; then \ ${ECHO_MSG} ">> FTP didn't fetch expected file, trying next site." ; \ else \ continue 2; \ fi; \ fi \ done; \ ${ECHO_MSG} ">> Couldn't fetch it - please try to retrieve this";\ ${ECHO_MSG} ">> file manually into ${_DISTDIR} and try again."; \ exit 1; \ fi _CHECK_DIST_PATH= \ if [ "X${DIST_PATH}" != "X" ]; then \ for d in "" `${ECHO} ${DIST_PATH} | ${TR} ':' ' '`; do \ if [ "X$$d" = "X" -o "X$$d" = "X${DISTDIR}" ]; then continue; fi; \ if [ -f $$d/${DIST_SUBDIR}/$$bfile ]; then \ ${ECHO} "Using $$d/${DIST_SUBDIR}/$$bfile"; \ ${RM} -f $$bfile; \ ${LN} -s $$d/${DIST_SUBDIR}/$$bfile $$bfile; \ break; \ fi; \ done; \ fi # # Sort the master site list according to the patterns in MASTER_SORT # MASTER_SORT?= MASTER_SORT_REGEX?= MASTER_SORT_REGEX+= ${MASTER_SORT:S/./\\./g:C/.*/:\/\/[^\/]*&\//} MASTER_SORT_AWK= BEGIN { RS = " "; ORS = " "; IGNORECASE = 1 ; gl = "${MASTER_SORT_REGEX}"; } .for srt in ${MASTER_SORT_REGEX} MASTER_SORT_AWK+= /${srt:C/\//\\\//g}/ { good["${srt}"] = good["${srt}"] " " $$0 ; next; } .endfor MASTER_SORT_AWK+= { rest = rest " " $$0; } END { n=split(gl, gla); for(i=1;i<=n;i++) { print good[gla[i]]; } print rest; } SORTED_MASTER_SITES!= echo '${MASTER_SITES}' | awk '${MASTER_SORT_AWK}' .if !target(do-fetch) do-fetch: ${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${_DISTDIR} ${_PKG_SILENT}(${_PKG_DEBUG}cd ${_DISTDIR}; \ sites="${SORTED_MASTER_SITES}"; \ for file in "" ${_DISTFILES}; do \ if [ "X$$file" = X"" ]; then continue; fi; \ bfile=`${BASENAME} $$file`; \ ${_CHECK_DIST_PATH}; \ ${_FETCH_FILE} \ done) .if defined(_PATCHFILES) ${_PKG_SILENT}(${_PKG_DEBUG}cd ${_DISTDIR}; \ sites="${PATCH_SITES}"; \ for file in "" ${_PATCHFILES}; do \ if [ "X$$file" = X"" ]; then continue; fi; \ bfile=`${BASENAME} $$file`; \ ${_CHECK_DIST_PATH}; \ ${_FETCH_FILE} \ done) .endif .endif .if !target(show-distfiles) show-distfiles: .if defined(IGNORE) ${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA} .else ${_PKG_SILENT}${_PKG_DEBUG} \ for file in "" ${_CKSUMFILES}; do \ if [ "X$$file" = "X" ]; then continue; fi; \ ${ECHO} $$file; \ done .endif .endif .if !target(show-downlevel) show-downlevel: .if defined(IGNORE) ${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA} .else ${_PKG_SILENT}${_PKG_DEBUG} \ base=`${ECHO} ${PKGNAME} | ${SED} -e 's|\(.*\)-.*|\1|'`; \ found=`${PKG_INFO} -e "$$base-*" || ${TRUE}`; \ if [ "X$$found" != "X" -a "X$$found" != "X${PKGNAME}" ]; then \ ${ECHO} "$$base package: $$found installed, pkgsrc version ${PKGNAME}"; \ fi .endif .endif # Extract DOWNLOADED_DISTFILE= ${_DISTDIR}/$$file .if !target(do-extract) do-extract: .ifndef NO_WRKDIR .ifndef KEEP_WRKDIR ${_PKG_SILENT}${_PKG_DEBUG}${RM} -rf ${WRKDIR} .endif ${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${WRKDIR} .ifdef WRKOBJDIR ${_PKG_SILENT}${_PKG_DEBUG} \ ${RM} -f ${WRKDIR_BASENAME} || ${TRUE}; \ if ${LN} -s ${WRKDIR} ${WRKDIR_BASENAME} 2>/dev/null; then \ ${ECHO} "${WRKDIR_BASENAME} -> ${WRKDIR}"; \ fi .endif # WRKOBJDIR .endif ${_PKG_SILENT}${_PKG_DEBUG} \ for file in "" ${EXTRACT_ONLY}; do \ if [ "X$$file" = X"" ]; then continue; fi; \ (cd ${WRKDIR} && ${EXTRACT_CMD}); \ done .endif # Patch .if !target(do-patch) do-patch: .if defined(PATCHFILES) @${ECHO_MSG} "===> Applying distribution patches for ${PKGNAME}" ${_PKG_SILENT}(${_PKG_DEBUG}cd ${_DISTDIR}; \ for i in ${PATCHFILES}; do \ if [ ${PATCH_DEBUG_TMP} = yes ]; then \ ${ECHO_MSG} "===> Applying distribution patch $$i" ; \ fi; \ case $$i in \ *.Z|*.gz) \ ${GZCAT} $$i | ${PATCH} ${PATCH_DIST_ARGS} \ || ( ${ECHO} Patch $$i failed ; exit 1 ) ; \ ;; \ *) \ ${PATCH} ${PATCH_DIST_ARGS} < $$i \ || ( ${ECHO} Patch $$i failed ; exit 1 ) ; \ ;; \ esac; \ done) .endif ${_PKG_SILENT}${_PKG_DEBUG}if [ -d ${PATCHDIR} ]; then \ if [ "`${ECHO} ${PATCHDIR}/patch-*`" = "${PATCHDIR}/patch-*" ]; then \ ${ECHO_MSG} "===> Ignoring empty patch directory"; \ if [ -d ${PATCHDIR}/CVS ]; then \ ${ECHO_MSG} "===> Perhaps you forgot the -P flag to cvs co or update?"; \ fi; \ else \ ${ECHO_MSG} "===> Applying ${OPSYS} patches for ${PKGNAME}" ; \ fail=""; \ for i in ${PATCHDIR}/patch-*; do \ case $$i in \ *.orig|*.rej|*~) \ ${ECHO_MSG} "===> Ignoring patchfile $$i" ; \ continue; \ ;; \ ${PATCHDIR}/patch-local-*) \ ;; \ *) \ if [ -f ${PATCH_SUM_FILE} ]; then \ filename=`expr $$i : '.*/\(.*\)'`; \ calcsum=`${SED} -e '/\$$NetBSD.*/d' $$i | ${MD5}`; \ recorded=`${AWK} '$$1 == "MD5" && $$2 == "('$$filename')" { print $$4; }' ${PATCH_SUM_FILE} || ${TRUE}`; \ if [ "X$$recorded" = "X" ]; then \ ${ECHO_MSG} "**************************************"; \ ${ECHO_MSG} "Ignoring unknown patch file: $$i"; \ ${ECHO_MSG} "**************************************"; \ continue; \ fi; \ if [ "X$$calcsum" != "X$$recorded" ]; then \ ${ECHO_MSG} "**************************************"; \ ${ECHO_MSG} "Patch file $$i has been modified"; \ ${ECHO_MSG} "**************************************"; \ fail="$$fail $$filename"; \ continue; \ fi; \ fi; \ ;; \ esac; \ if [ ${PATCH_DEBUG_TMP} = yes ]; then \ ${ECHO_MSG} "===> Applying ${OPSYS} patch $$i" ; \ fi; \ ${PATCH} ${PATCH_ARGS} < $$i || ( ${ECHO} Patch $$i failed ; exit 1 ) ; \ done; \ if [ "X$$fail" != "X" ]; then \ ${ECHO_MSG} "Patching failed due to modified patch file(s): $$fail"; \ exit 1; \ fi; \ fi; \ fi .endif # Configure .if !target(do-configure) do-configure: ${_PKG_SILENT}${_PKG_DEBUG}if [ -f ${SCRIPTDIR}/configure ]; then \ cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \ ${SCRIPTDIR}/configure; \ fi .if defined(HAS_CONFIGURE) ${_PKG_SILENT}(${_PKG_DEBUG}cd ${WRKSRC} && ${SETENV} CC="${CC}" ac_cv_path_CC="${CC}" \ CFLAGS="${CFLAGS}" \ INSTALL="`${TYPE} ${INSTALL} | ${AWK} '{ print $$NF }'` -c -o ${BINOWN} -g ${BINGRP}" \ INSTALL_DATA="${INSTALL_DATA}" \ INSTALL_PROGRAM="${INSTALL_PROGRAM}" \ INSTALL_SCRIPT="${INSTALL_SCRIPT}" \ ${CONFIGURE_ENV} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}) .endif .if defined(USE_IMAKE) ${_PKG_SILENT}(${_PKG_DEBUG}cd ${WRKSRC} && ${SETENV} ${SCRIPTS_ENV} XPROJECTROOT=${X11BASE} ${XMKMF}) .endif .endif # Build .if !target(do-build) do-build: ${_PKG_SILENT}(${_PKG_DEBUG}cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE_PROGRAM} ${MAKE_FLAGS} -f ${MAKEFILE} ${ALL_TARGET}) .endif # Install .if !target(do-install) do-install: ${_PKG_SILENT}(${_PKG_DEBUG}cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE_PROGRAM} ${MAKE_FLAGS} -f ${MAKEFILE} ${INSTALL_TARGET}) .endif # Package .if !target(do-package) do-package: ${PLIST} ${DESCR} ${_PKG_SILENT}${_PKG_DEBUG}if ${TEST} -e ${PLIST}; then \ ${ECHO_MSG} "===> Building package for ${PKGNAME}"; \ if [ ! -d ${PKGREPOSITORY} ]; then \ ${MKDIR} ${PKGREPOSITORY}; \ if [ $$? -ne 0 ]; then \ ${ECHO_MSG} ">> Can't create directory ${PKGREPOSITORY}."; \ exit 1; \ fi; \ fi; \ if ${PKG_CREATE} ${PKG_ARGS} ${PKGFILE}; then \ ${MAKE} ${.MAKEFLAGS} package-links; \ else \ ${MAKE} ${.MAKEFLAGS} delete-package; \ exit 1; \ fi; \ fi .endif # Some support rules for do-package .if !target(package-links) package-links: ${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${.MAKEFLAGS} delete-package-links ${_PKG_SILENT}${_PKG_DEBUG}for cat in ${CATEGORIES}; do \ if [ ! -d ${PACKAGES}/$$cat ]; then \ ${MKDIR} ${PACKAGES}/$$cat; \ if [ $$? -ne 0 ]; then \ ${ECHO_MSG} ">> Can't create directory ${PACKAGES}/$$cat."; \ exit 1; \ fi; \ fi; \ ${LN} -s ../${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PACKAGES}/$$cat; \ done; .endif .if !target(delete-package-links) delete-package-links: ${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${PACKAGES}/[a-z]*/${PKGNAME}${PKG_SUFX}; .endif .if !target(delete-package) delete-package: ${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${.MAKEFLAGS} delete-package-links ${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${PKGFILE} .endif # Set the PLIST_SRC definition, if necessary .if !defined(PLIST_SRC) .if exists(${PKGDIR}/PLIST) PLIST_SRC= ${PKGDIR}/PLIST .elif exists(${PKGDIR}/PLIST-mi) && \ exists(${PKGDIR}/PLIST-md.shared) && \ exists(${PKGDIR}/PLIST-md.static) PLIST_SRC= ${PKGDIR}/PLIST-mi .if defined(NOPIC) PLIST_SRC+= ${PKGDIR}/PLIST-md.static .else PLIST_SRC+= ${PKGDIR}/PLIST-md.shared .endif # NOPIC .else # no PLIST at all PLIST_SRC= .endif # ${PKGDIR}/PLIST .endif # !PLIST_SRC ################################################################ # This is the "generic" package target, actually a macro used from the # six main targets. See below for more. ################################################################ _PORT_USE: .USE .if make(real-fetch) ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fetch-depends .endif .if make(real-extract) ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} build-depends misc-depends .endif ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${MAKE_ENV} ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/pre-/} ${_PKG_SILENT}${_PKG_DEBUG}if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/pre-/} ]; then \ cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \ ${SCRIPTDIR}/${.TARGET:S/^real-/pre-/}; \ fi ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${MAKE_ENV} ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/do-/} ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${MAKE_ENV} ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/post-/} ${_PKG_SILENT}${_PKG_DEBUG}if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/post-/} ]; then \ cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \ ${SCRIPTDIR}/${.TARGET:S/^real-/post-/}; \ fi .if !make(real-fetch) \ && (!make(real-patch) || !defined(PATCH_CHECK_ONLY)) \ && (!make(real-package) || !defined(PACKAGE_NOINSTALL)) ${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${WRKDIR}/.${.TARGET:S/^real-//}_done .endif root-install: .if !defined(NO_PKG_REGISTER) && !defined(FORCE_PKG_REGISTER) .if defined(CONFLICTS) ${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${WRKDIR}/.CONFLICTS .for conflict in ${CONFLICTS} ${_PKG_SILENT}${_PKG_DEBUG}found="`${PKG_INFO} -e \"${conflict}\" || ${TRUE}`"; \ if [ X"$$found" != X"" ]; then \ ${ECHO} "$$found" >> ${WRKDIR}/.CONFLICTS; \ fi .endfor ${_PKG_SILENT}${_PKG_DEBUG}if [ -s ${WRKDIR}/.CONFLICTS ]; then \ found=`cat ${WRKDIR}/.CONFLICTS | ${SED} -e s'|${PKG_DBDIR}/||g' | tr '\012' ' '`; \ ${ECHO_MSG} "===> ${PKGNAME} conflicts with installed package(s): $$found found."; \ ${ECHO_MSG} " They install the same files into the same place."; \ ${ECHO_MSG} " Please remove $$found first with pkg_delete(1)."; \ ${RM} -f ${WRKDIR}/.CONFLICTS; \ exit 1; \ fi .endif # CONFLICTS ${_PKG_SILENT}${_PKG_DEBUG}found="`${PKG_INFO} -e \"${PKGNAME:C/-[^-]*$/-[0-9]*/}\" || ${TRUE}`"; \ if [ "$$found" != "" ]; then \ ${ECHO_MSG} "===> $$found is already installed - perhaps an older version?"; \ ${ECHO_MSG} " If so, you may wish to \`\`pkg_delete $$found'' and install"; \ ${ECHO_MSG} " this package again by \`\`${MAKE} reinstall'' to upgrade it properly."; \ ${ECHO_MSG} " If you really wish to overwrite the old package of $$found"; \ ${ECHO_MSG} " without deleting it first, set the variable \"FORCE_PKG_REGISTER\""; \ ${ECHO_MSG} " in your environment or the \"${MAKE} install\" command line."; \ exit 1; \ fi .endif # !NO_PKG_REGISTER && !NO_FORCE_REGISTER ${_PKG_SILENT}${_PKG_DEBUG}if [ `${SH} -c umask` != ${DEF_UMASK} ]; then \ ${ECHO_MSG} "===> Warning: your umask is \"`${SH} -c umask`"\".; \ ${ECHO_MSG} " If this is not desired, set it to an appropriate value (${DEF_UMASK})"; \ ${ECHO_MSG} " and install this package again by \`\`${MAKE} deinstall reinstall''."; \ fi ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} run-depends .if !defined(NO_MTREE) ${_PKG_SILENT}${_PKG_DEBUG}if [ `${ID} -u` = 0 ]; then \ if [ ! -f ${MTREE_FILE} ]; then \ ${ECHO_MSG} "Error: mtree file \"${MTREE_FILE}\" is missing."; \ exit 1; \ else \ if [ ! -d ${PREFIX} ]; then \ mkdir -p ${PREFIX}; \ fi; \ ${MTREE} ${MTREE_ARGS} ${PREFIX}/; \ fi; \ else \ ${ECHO_MSG} "Warning: not superuser, can't run mtree."; \ ${ECHO_MSG} "Become root and try again to ensure correct permissions."; \ fi .endif # !NO_MTREE ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${MAKE_ENV} ${MAKE} ${.MAKEFLAGS} pre-install ${_PKG_SILENT}${_PKG_DEBUG}if [ -f ${SCRIPTDIR}/pre-install ]; then \ cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \ ${SCRIPTDIR}/pre-install; \ fi ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${MAKE_ENV} ${MAKE} ${.MAKEFLAGS} do-install ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${MAKE_ENV} ${MAKE} ${.MAKEFLAGS} post-install ${_PKG_SILENT}${_PKG_DEBUG}if [ -f ${SCRIPTDIR}/post-install ]; then \ cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \ ${SCRIPTDIR}/post-install; \ fi .for f in ${INFO_FILES} ${_PKG_SILENT}${_PKG_DEBUG}${ECHO} "install-info --info-dir=${PREFIX}/info ${PREFIX}/info/${f}"; \ install-info --remove --info-dir=${PREFIX}/info ${PREFIX}/info/${f}; \ install-info --info-dir=${PREFIX}/info ${PREFIX}/info/${f} .endfor ${_PKG_SILENT}(${_PKG_DEBUG}newmanpages=`${EGREP} -h \ '^([^/]*/)*man/([^/]*/)?(man[1-9ln]/.*\.[1-9ln]|cat[1-9ln]/.*\.0)(\.gz)?$$' \ ${PLIST_SRC} || ${TRUE}`; \ if [ X"${MANCOMPRESSED}" != X"" -a X"${MANZ}" = X"" ]; then \ ${ECHO_MSG} "===> [Automatic manual page handling]"; \ ${ECHO_MSG} "===> Decompressing manual pages for ${PKGNAME}"; \ for manpage in $$newmanpages; do \ manpage=`${ECHO} $$manpage | ${SED} -e 's|\.gz$$||'`; \ if [ -h ${PREFIX}/$$manpage.gz ]; then \ set - `${FILE} ${PREFIX}/$$manpage.gz | ${SED} -e 's|\.gz$$||'`; \ shift `expr $$# - 1`; \ ${RM} -f ${PREFIX}/$$manpage; \ ${LN} -s $${1} ${PREFIX}/$$manpage; \ ${RM} ${PREFIX}/$$manpage.gz; \ else \ ${GUNZIP_CMD} ${PREFIX}/$$manpage.gz; \ fi; \ if [ X"${PKG_VERBOSE}" != X"" ]; then \ ${ECHO_MSG} "$$manpage"; \ fi; \ done; \ fi; \ if [ X"${MANCOMPRESSED}" = X"" -a X"${MANZ}" != X"" ]; then \ ${ECHO_MSG} "===> [Automatic manual page handling]"; \ ${ECHO_MSG} "===> Compressing manual pages for ${PKGNAME}"; \ for manpage in $$newmanpages; do \ manpage=`${ECHO} $$manpage | ${SED} -e 's|\.gz$$||'`; \ if [ -h ${PREFIX}/$$manpage ]; then \ set - `${FILE} ${PREFIX}/$$manpage`; \ shift `expr $$# - 1`; \ ${RM} -f ${PREFIX}/$$manpage.gz; \ ${LN} -s $${1}.gz ${PREFIX}/$$manpage.gz; \ ${RM} ${PREFIX}/$$manpage; \ else \ ${GZIP_CMD} ${PREFIX}/$$manpage; \ fi; \ if [ X"${PKG_VERBOSE}" != X"" ]; then \ ${ECHO_MSG} "$$manpage"; \ fi; \ done; \ fi) ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${PLIST} .if ${OPSYS} == "NetBSD" ${_PKG_SILENT}(${_PKG_DEBUG}sos=`${EGREP} -h \ '.*/lib[^/]+\.so\.[0-9]+\.[0-9]+$$' \ ${PLIST} || ${TRUE}`; \ if [ X"$$sos" != X"" ]; then \ shlib_type=`${MAKE} ${.MAKEFLAGS} show-shlib-type`; \ case "$$shlib_type" in \ "ELF") \ ${ECHO_MSG} "===> [Automatic ELF shared object handling]";\ for so3 in $$sos; do \ so2=`${BASENAME} $$so3`; \ so1=`${ECHO} $$so3 | ${SED} -e 's|\.[0-9]*$$||'`; \ so0=`${ECHO} $$so1 | ${SED} -e 's|\.[0-9]*$$||'`; \ cnt=`${EGREP} -c -x "$$so0" ${PLIST} || ${TRUE}`; \ if [ $$cnt -eq 0 ]; then \ ${SED} -e "s|^$$so3$$|&!$$so0|" -e 'y|!|\n|' ${PLIST} > ${PLIST}.tmp && ${MV} ${PLIST}.tmp ${PLIST}; \ ${ECHO_MSG} "${LN} -s $$so2 ${PREFIX}/$$so0"; \ ${RM} -f ${PREFIX}/$$so0; \ ${LN} -s $$so2 ${PREFIX}/$$so0; \ fi; \ cnt=`${EGREP} -c -x "$$so1" ${PLIST} || ${TRUE}`; \ if [ $$cnt -eq 0 ]; then \ ${SED} -e "s|^$$so3$$|&!$$so1|" -e 'y|!|\n|' ${PLIST} > ${PLIST}.tmp && ${MV} ${PLIST}.tmp ${PLIST}; \ ${ECHO_MSG} "${LN} -s $$so2 ${PREFIX}/$$so1"; \ ${RM} -f ${PREFIX}/$$so1; \ ${LN} -s $$so2 ${PREFIX}/$$so1; \ fi; \ if [ X"${PKG_VERBOSE}" != X"" ]; then \ ${ECHO_MSG} "$$so3"; \ fi; \ done; \ ;; \ "a.out") \ ${ECHO_MSG} "===> [Automatic a.out shared object handling]";\ cnt=`${EGREP} -c -x '@exec[ ]*${LDCONFIG}' ${PLIST} || ${TRUE}`; \ if [ $$cnt -eq 0 ]; then \ ${ECHO} "@exec ${LDCONFIG}" >> ${PLIST}; \ ${ECHO} "@unexec ${LDCONFIG}" >> ${PLIST}; \ fi; \ if [ X"${PKG_VERBOSE}" != X"" ]; then \ ${ECHO_MSG} "$$sos"; \ ${ECHO_MSG} "Running ${LDCONFIG}"; \ fi; \ ${LDCONFIG} || ${TRUE}; \ ;; \ "*") \ ${ECHO_MSG} "No shared libraries for ${MACHINE_ARCH}"; \ for so in $$sos; do \ if [ X"${PKG_VERBOSE}" != X"" ]; then \ ${ECHO_MSG} "Ignoring $$so"; \ fi; \ ${SED} -e "s;^$$so$$;@comment No shared objects - &;" ${PLIST} > ${PLIST}.tmp && \ ${MV} ${PLIST}.tmp ${PLIST}; \ done; \ ;; \ esac; \ fi) .endif .ifdef MESSAGE_FILE @${ECHO_MSG} "===> Please note the following:" @${ECHO_MSG} "" @${CAT} ${MESSAGE_FILE} @${ECHO_MSG} "" .endif .if !defined(NO_PKG_REGISTER) ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fake-pkg .endif # !NO_PKG_REGISTER ${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${WRKDIR}/.install_done # Show the shared lib type being built: one of ELF, a.out or none show-shlib-type: ${_PKG_SILENT}${_PKG_DEBUG} \ cd ${WRKDIR} && \ sotype=none; \ if [ "X${MKPIC}" != "Xno" -a "X${NOPIC}" = "X" ]; then \ ${ECHO} "int main() { exit(0); }" > a.$$$$.c; \ ${CC} ${CFLAGS} a.$$$$.c -o a.$$$$.out; \ case `${FILE} a.$$$$.out` in \ *ELF*dynamically*) \ sotype=ELF ;; \ *dynamically*) \ sotype="a.out" ;; \ esac; \ fi; \ ${ECHO} "$$sotype"; \ ${RM} -f a.$$$$.c a.$$$$.out ################################################################ # Skeleton targets start here # # You shouldn't have to change these. Either add the pre-* or # post-* targets/scripts or redefine the do-* targets. These # targets don't do anything other than checking for cookies and # call the necessary targets/scripts. ################################################################ .if !target(fetch) fetch: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-fetch .endif .if !target(extract) extract: checksum ${EXTRACT_COOKIE} .endif .if !target(patch) patch: extract ${PATCH_COOKIE} .endif .if !target(configure) configure: patch ${CONFIGURE_COOKIE} .endif .if !target(build) build: configure ${BUILD_COOKIE} .endif .if !target(install) install: uptodate-pkgtools build ${INSTALL_COOKIE} .endif .if !target(package) package: uptodate-pkgtools install ${PACKAGE_COOKIE} .endif ${EXTRACT_COOKIE}: ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-extract ${PATCH_COOKIE}: ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-patch ${CONFIGURE_COOKIE}: ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-configure ${BUILD_COOKIE}: ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-build ${INSTALL_COOKIE}: ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-install ${PACKAGE_COOKIE}: ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-package # And call the macros real-fetch: _PORT_USE real-extract: _PORT_USE @${ECHO_MSG} "===> Extracting for ${PKGNAME}" real-patch: _PORT_USE @${ECHO_MSG} "===> Patching for ${PKGNAME}" real-configure: _PORT_USE @${ECHO_MSG} "===> Configuring for ${PKGNAME}" real-build: _PORT_USE @${ECHO_MSG} "===> Building for ${PKGNAME}" real-install: pkg-su-install real-package: _PORT_USE # sudo or priv are acceptable substitutes SU_CMD?= ${SU} - root -c PRE_ROOT_CMD?= ${TRUE} pkg-su-install: @${ECHO_MSG} "===> Installing for ${PKGNAME}" ${_PKG_SILENT}${_PKG_DEBUG} \ if [ `${ID} -u` = 0 ]; then \ ${MAKE} ${.MAKEFLAGS} root-install; \ elif [ "X${BATCH}" != X"" ]; then \ ${ECHO_MSG} "Warning: Batch mode, not superuser, can't run mtree."; \ ${ECHO_MSG} "Become root and try again to ensure correct permissions."; \ else \ make=`${TYPE} ${MAKE} | ${AWK} '{ print $$NF }'`; \ args=""; \ if [ "X${FORCE_PKG_REGISTER}" != X"" ]; then \ args="FORCE_PKG_REGISTER=1"; \ fi; \ if [ "X${PKG_DEBUG_LEVEL}" != X"" ]; then \ args="$$args PKG_DEBUG_LEVEL=${PKG_DEBUG_LEVEL}"; \ fi; \ if [ "X${PRE_ROOT_CMD}" != "X${TRUE}" ]; then \ ${ECHO} "*** WARNING *** Running: ${PRE_ROOT_CMD}"; \ ${PRE_ROOT_CMD}; \ fi; \ ${ECHO_MSG} "===> Becoming root@`/bin/hostname` to install ${PKGNAME}."; \ ${ECHO_MSG} -n "`${ECHO} ${SU_CMD} | ${AWK} '{ print $$1 }'` ";\ ${SU_CMD} "cd ${.CURDIR}; $$make $$args ${.MAKEFLAGS} root-install"; \ fi # Empty pre-* and post-* targets, note we can't use .if !target() # in the _PORT_USE macro .for name in fetch extract patch configure build install package .if !target(pre-${name}) pre-${name}: @${DO_NADA} .endif .if !target(post-${name}) post-${name}: @${DO_NADA} .endif .endfor # Checkpatch # # Special target to verify patches .if !target(checkpatch) checkpatch: ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} PATCH_CHECK_ONLY=yes ${.MAKEFLAGS} patch .endif # Reinstall # # Special target to re-run install .if !target(reinstall) reinstall: ${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE} ${PLIST} ${_PKG_SILENT}${_PKG_DEBUG}DEPENDS_TARGET=${DEPENDS_TARGET} ${MAKE} install .endif # Deinstall # # Special target to remove installation .if !target(deinstall) deinstall: pkg-su-deinstall pkg-su-deinstall: uptodate-pkgtools @${ECHO_MSG} "===> Deinstalling for ${PKGNAME}" ${_PKG_SILENT}${_PKG_DEBUG} \ if [ `${ID} -u` = 0 ]; then \ ${MAKE} ${.MAKEFLAGS} root-deinstall; \ else \ make=`${TYPE} ${MAKE} | ${AWK} '{ print $$NF }'`; \ ${ECHO_MSG} "===> Becoming root@`/bin/hostname` to deinstall ${PKGNAME}."; \ ${SU_CMD} "cd ${.CURDIR}; $$make ${.MAKEFLAGS} PKG_DEBUG_LEVEL=${PKG_DEBUG_LEVEL} root-deinstall DEINSTALLDEPENDS=${DEINSTALLDEPENDS}"; \ fi .if (${DEINSTALLDEPENDS} != "NO") .if (${DEINSTALLDEPENDS} != "ALL") # used for removing stuff in bulk builds root-install-flags+= -r -R # used for "update" target .else root-install-flags+= -r .endif .endif .ifdef PKG_VERBOSE root-install-flags+= -v .endif root-deinstall: ${_PKG_SILENT}${_PKG_DEBUG} \ found=`${PKG_INFO} -e "${PKGNAME:C/-[^-]*$/-[0-9]*/}" || ${TRUE}` ; \ if [ "$$found" != "" ]; then \ ${ECHO} Running ${PKG_DELETE} ${root-install-flags} $$found ; \ ${PKG_DELETE} ${root-install-flags} $$found || ${TRUE} ; \ fi @${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE} .endif # target(deinstall) ################################################################ # Some more targets supplied for users' convenience ################################################################ # The 'update' target can be used to update a package and all # currently installed packages that depend upon this package. update: .if (${REINSTALL} == "NO") ${_PKG_SILENT}${_PKG_DEBUG}${MAKE} clean .endif ${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${DDIR} ${_PKG_SILENT}${_PKG_DEBUG}${MAKE} deinstall DEINSTALLDEPENDS=ALL .if (${REINSTALL} == "NO") ${_PKG_SILENT}${_PKG_DEBUG} \ ${MAKE} ${DEPENDS_TARGET} KEEP_WRKDIR=YES .else ${_PKG_SILENT}${_PKG_DEBUG}${MAKE} reinstall .endif ${_PKG_SILENT}${_PKG_DEBUG} \ if [ -s ${DDIR} ] ; then \ for dep in `${CAT} ${DDIR}` ; do \ ${ECHO_MSG} "===> Installing in $${dep}" ; \ (cd "../../$${dep}" && \ if [ "${REINSTALL}" = "NO" ] ; then \ ${MAKE} clean && \ ${MAKE} ${DEPENDS_TARGET} ; \ else \ ${MAKE} reinstall ; \ fi) ; \ done ; \ fi ${DDIR}: ${DLIST} ${_PKG_SILENT}${_PKG_DEBUG} \ ddir=`${SED} 's:-[^-]*$$::' <${DLIST}` ; \ if ${PKG_INFO} -b $${ddir} >/dev/null 2>&1 ; then \ ${PKG_INFO} -b $${ddir} | \ ${EGREP} '^[^/]+/[^/]+/Makefile:' | \ ${CUT} -d'/' -f1-2 >${DDIR} ; \ else \ ${ECHO} >${DDIR} ; \ fi ${DLIST}: ${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} -p ${WRKDIR} ${_PKG_SILENT}${_PKG_DEBUG} \ (${PKG_INFO} -R "${PKGNAME:C/-[^-]*$/-[0-9]*/}" || ${TRUE}) | \ ${TAIL} -n +4 >${DLIST} # This is for the use of sites which store distfiles which others may # fetch - only fetch the distfile if it is allowed to be # re-distributed freely mirror-distfiles: .if (${MIRROR_DISTFILE} == "yes") ${_PKG_SILENT}${_PKG_DEBUG}${MAKE} fetch NO_IGNORE=yes NO_CHECK_DEPENDS=yes .endif # Cleaning up .if !target(pre-clean) pre-clean: @${DO_NADA} .endif .if !target(clean) clean: pre-clean .if (${CLEANDEPENDS} != "NO") ${_PKG_SILENT}${_PKG_DEBUG}${MAKE} clean-depends .endif @${ECHO_MSG} "===> Cleaning for ${PKGNAME}" .if !defined(NO_WRKDIR) .ifdef WRKOBJDIR ${_PKG_SILENT}${_PKG_DEBUG}${RM} -rf ${WRKOBJDIR}/${PKGSRC_SUBDIR} -${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${WRKDIR_BASENAME} .else ${_PKG_SILENT}${_PKG_DEBUG}if [ -d ${WRKDIR} ]; then \ if [ -w ${WRKDIR} ]; then \ ${RM} -rf ${WRKDIR}; \ else \ ${ECHO_MSG} "===> ${WRKDIR} not writable, skipping"; \ fi; \ fi .endif .else ${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${WRKDIR}/.*_done .endif .endif .if !target(pre-distclean) pre-distclean: @${DO_NADA} .endif .if !target(cleandir) cleandir: clean .endif .if !target(distclean) distclean: pre-distclean clean ${_PKG_SILENT}${ECHO_MSG} "===> Dist cleaning for ${PKGNAME}" ${_PKG_SILENT}(${_PKG_DEBUG}if [ -d ${_DISTDIR} ]; then \ cd ${_DISTDIR} && \ ${TEST} -z "${DISTFILES}" || ${RM} -f ${DISTFILES}; \ ${TEST} -z "${PATCHFILES}" || ${RM} -f ${PATCHFILES}; \ fi) .if defined(DIST_SUBDIR) -${_PKG_SILENT}${_PKG_DEBUG}${RMDIR} ${_DISTDIR} .endif -${_PKG_SILENT}${_PKG_DEBUG}${RM} -f README.html .endif # Prints out a list of files to fetch (useful to do a batch fetch) # are we called from bsd.pkg.subdir.mk (i.e. do we scan all dirs anyway)? XXX .ifdef(_THISDIR_) RECURSIVE_FETCH_LIST?= NO .else RECURSIVE_FETCH_LIST?= YES .endif .if !target(fetch-list) fetch-list: @${MAKE} fetch-list-recursive RECURSIVE_FETCH_LIST=${RECURSIVE_FETCH_LIST} | sort -u .endif # !target(fetch-list) .if !target(fetch-list-recursive) fetch-list-recursive: @${MAKE} fetch-list-one-pkg .if ${RECURSIVE_FETCH_LIST} != "NO" @for dir in `${ECHO} ${BUILD_DEPENDS} ${DEPENDS} ${RUN_DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` ; do \ (cd $$dir && ${MAKE} fetch-list-recursive; ); \ done .endif # ${RECURSIVE_FETCH_LIST} != "NO" .endif # !target(fetch-list-recursive) .if !target(fetch-list-one-pkg) fetch-list-one-pkg: @${MKDIR} ${_DISTDIR} @[ -z "${_DISTDIR}" ] || ${ECHO} "${MKDIR} ${_DISTDIR}" .if defined(DISTFILES) @(cd ${_DISTDIR}; \ for file in "" ${DISTFILES}; do \ if [ "X$$file" = X"" ]; then continue; fi; \ if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \ ${ECHO} -n "cd ${_DISTDIR} && [ -f $$file -o -f `${BASENAME} $$file` ] || " ; \ for site in "" ${SORTED_MASTER_SITES}; do \ if [ "X$$site" = X"" ]; then continue; fi; \ ${ECHO} -n ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} "${FETCH_AFTER_ARGS}" '|| ' ; \ done; \ ${ECHO} "${ECHO} $${file} not fetched"; \ fi \ done) .endif # DISTFILES .if defined(PATCHFILES) @(cd ${_DISTDIR}; \ for file in "" ${PATCHFILES}; do \ if [ "X$$file" = X"" ]; then continue; fi; \ if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \ ${ECHO} -n "cd ${_DISTDIR} && [ -f $$file -o -f `${BASENAME} $$file` ] || " ; \ for site in ${PATCH_SITES}; do \ ${ECHO} -n ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} "${FETCH_AFTER_ARGS}" '|| ' ; \ done; \ ${ECHO} "${ECHO} $${file} not fetched"; \ fi \ done) .endif # defined(PATCHFILES) .endif # !target(fetch-list-one-pkg) # Checksumming utilities .if !target(makesum) makesum: fetch ${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${FILESDIR} ${_PKG_SILENT}${_PKG_DEBUG}if [ -f ${MD5_FILE} ]; then ${RM} -f ${MD5_FILE}; fi @${ECHO} -n "$$" > ${MD5_FILE}; \ ${ECHO} -n "NetBSD" >> ${MD5_FILE}; \ ${ECHO} "$$" >> ${MD5_FILE}; \ ${ECHO} "" >> ${MD5_FILE} ${_PKG_SILENT}(${_PKG_DEBUG}cd ${DISTDIR}; \ for sumfile in "" ${_CKSUMFILES}; do \ if [ "X$$sumfile" = X"" ]; then continue; fi; \ ${MD5} $$sumfile >> ${MD5_FILE}; \ done) ${_PKG_SILENT}${_PKG_DEBUG} \ for ignore in "" ${_IGNOREFILES}; do \ if [ "X$$sumfile" = X"" ]; then continue; fi; \ ${ECHO} "MD5 ($$ignore) = IGNORE" >> ${MD5_FILE}; \ done .endif .if !target(makepatchsum) makepatchsum: ${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${FILESDIR} ${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${PATCH_SUM_FILE} ${_PKG_SILENT}(${_PKG_DEBUG} \ if [ -d ${PATCHDIR} ]; then \ cd ${PATCHDIR}; \ ${ECHO} -n "$$" > ${PATCH_SUM_FILE}; \ ${ECHO} -n "NetBSD" >> ${PATCH_SUM_FILE}; \ ${ECHO} "$$" >> ${PATCH_SUM_FILE}; \ ${ECHO} "" >> ${PATCH_SUM_FILE}; \ for sumfile in "" patch-*; do \ if [ "X$$sumfile" = X"" ]; then continue; fi; \ case $$sumfile in \ patch-local-*) ;; \ *.orig) continue ;; \ *) \ ${ECHO} "MD5 ($$sumfile) = `${SED} -e '/\$$NetBSD.*/d' $$sumfile | ${MD5}`" >> ${PATCH_SUM_FILE}; \ esac; \ done; \ fi) .endif .if !target(checksum) checksum: fetch ${_PKG_SILENT}${_PKG_DEBUG} \ if [ ! -f ${MD5_FILE} ]; then \ ${ECHO_MSG} ">> No MD5 checksum file."; \ else \ (cd ${DISTDIR}; OK="true"; \ for file in "" ${_CKSUMFILES}; do \ if [ "X$$file" = X"" ]; then continue; fi; \ CKSUM=`${MD5} < $$file`; \ CKSUM2=`${AWK} '$$1 == "MD5" && $$2 == "('$$file')"{print $$4;}' ${MD5_FILE}`; \ if [ "$$CKSUM2" = "" ]; then \ ${ECHO_MSG} ">> No checksum recorded for $$file."; \ OK="false"; \ elif [ "$$CKSUM2" = "IGNORE" ]; then \ ${ECHO_MSG} ">> Checksum for $$file is set to IGNORE in md5 file even though"; \ ${ECHO_MSG} " the file is not in the "'$$'"{IGNOREFILES} list."; \ OK="false"; \ elif [ "$$CKSUM" = "$$CKSUM2" ]; then \ ${ECHO_MSG} ">> Checksum OK for $$file."; \ else \ ${ECHO_MSG} ">> Checksum mismatch for $$file."; \ OK="false"; \ fi; \ done; \ for file in "" ${_IGNOREFILES}; do \ if [ "X$$file" = X"" ]; then continue; fi; \ CKSUM2=`${AWK} '$$1 == "MD5" && $$2 == "('$$file')"{print $$4;}' ${MD5_FILE}`; \ if [ "$$CKSUM2" = "" ]; then \ ${ECHO_MSG} ">> No checksum recorded for $$file, file is in "'$$'"{IGNOREFILES} list."; \ OK="false"; \ elif [ "$$CKSUM2" != "IGNORE" ]; then \ ${ECHO_MSG} ">> Checksum for $$file is not set to IGNORE in md5 file even though"; \ ${ECHO_MSG} " the file is in the "'$$'"{IGNOREFILES} list."; \ OK="false"; \ fi; \ done; \ if [ "$$OK" != "true" ]; then \ ${ECHO_MSG} "Make sure the Makefile and md5 file (${MD5_FILE})"; \ ${ECHO_MSG} "are up to date. If you want to override this check, type"; \ ${ECHO_MSG} "\"${MAKE} NO_CHECKSUM=yes [other args]\"."; \ exit 1; \ fi) ; \ fi .endif ################################################################ # The special package-building targets # You probably won't need to touch these ################################################################ HTMLIFY= ${SED} -e 's/&/\&/g' -e 's/>/\>/g' -e 's/\</g' # Set to "html" by the README.html target (and passed via depends-list # and package-depends) PACKAGE_NAME_TYPE?= name # Nobody should want to override this unless PKGNAME is simply bogus. .if !target(package-name) package-name: .if (${PACKAGE_NAME_TYPE} == "html") @${ECHO} ''`${ECHO} ${PKGNAME} | ${HTMLIFY}`'' .else @${ECHO} '${PKGNAME}' .endif # PACKAGE_NAME_TYPE .endif # !target(package-name) .if !target(package-path) package-path: @pwd | sed s@`cd ${PKGSRCDIR} && pwd`/@@g .endif # Show (recursively) all the packages this package depends on. # if PACKAGE_DEPENDS_WITH_PATTERNS is set, print as pattern (if possible) PACKAGE_DEPENDS_WITH_PATTERNS?=false .if !target(package-depends) package-depends: .for dep in ${DEPENDS} @pkg="`${ECHO} \"${dep}\" | ${SED} -e 's/:.*//'`"; \ dir="`${ECHO} \"${dep}\" | ${SED} -e 's/[^:]*://'`"; \ if [ -d $$dir ]; then \ if ${PACKAGE_DEPENDS_WITH_PATTERNS}; then \ ${ECHO} "$$pkg"; \ else \ (cd $$dir && ${MAKE} package-name PACKAGE_NAME_TYPE=${PACKAGE_NAME_TYPE}); \ fi; \ (cd $$dir && ${MAKE} package-depends PACKAGE_NAME_TYPE=${PACKAGE_NAME_TYPE}); \ else \ ${ECHO_MSG} "Warning: \"$$dir\" non-existent -- @pkgdep registration incomplete" >&2; \ fi .endfor .for dep in ${RUN_DEPENDS} @pkg="`${ECHO} \"${dep}\" | ${SED} -e 's/:.*//'`"; \ dir="`${ECHO} \"${dep}\" | ${SED} -e 's/[^:]*://'`"; \ if [ -d $$dir ]; then \ (cd $$dir && ${MAKE} package-name PACKAGE_NAME_TYPE=${PACKAGE_NAME_TYPE}); \ (cd $$dir && ${MAKE} package-depends PACKAGE_NAME_TYPE=${PACKAGE_NAME_TYPE}); \ else \ ${ECHO_MSG} "Warning: \"$$dir\" non-existent -- @pkgdep registration incomplete" >&2; \ fi .endfor .endif # target(package-depends) # Build a package but don't check the package cookie .if !target(repackage) repackage: pre-repackage package pre-repackage: ${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${PACKAGE_COOKIE} .endif # Build a package but don't check the cookie for installation, also don't # install package cookie .if !target(package-noinstall) package-noinstall: ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} PACKAGE_NOINSTALL=yes real-package .endif ################################################################ # Dependency checking ################################################################ .if !target(depends) depends: misc-depends ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fetch-depends ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} build-depends ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} run-depends .if make(build-depends) DEPENDS_TMP+= ${BUILD_DEPENDS} .endif .if make(run-depends) DEPENDS_TMP+= ${RUN_DEPENDS} .endif _DEPENDS_USE: .if defined(DEPENDS_TMP) .if !defined(NO_DEPENDS) .for i in ${DEPENDS_TMP} ${_PKG_SILENT}${_PKG_DEBUG}prog="`${ECHO} \"${i}\" | ${SED} -e 's/:.*//'`"; \ dir="`${ECHO} \"${i}\" | ${SED} -e 's/[^:]*://'`"; \ if [ ${_DEPENDS_TARGET_OVERRIDE}X != X ]; then \ target=${DEPENDS_TARGET}; \ elif expr "$$dir" : '.*:' > /dev/null; then \ target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \ dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \ else \ target=${DEPENDS_TARGET}; \ fi; \ found=not; \ if expr "$$prog" : '.*/' >/dev/null; then \ if ${TEST} -e "$$prog" ; then \ ${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - found"; \ found=""; \ else \ ${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - not found"; \ fi; \ else \ for d in `${ECHO} $$PATH | tr ':' ' '`; do \ if [ -x $$d/$$prog ]; then \ found="$$d/$$prog"; \ break; \ fi \ done; \ ${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - $$found found"; \ fi; \ if [ X"$$found" = Xnot ]; then \ ${ECHO_MSG} "===> Verifying $$target for $$prog in $$dir"; \ if [ ! -d "$$dir" ]; then \ ${ECHO_MSG} ">> No directory for $$prog. Skipping.."; \ else \ (cd $$dir && ${MAKE} ${.MAKEFLAGS} $$target) && \ ${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \ fi; \ fi .endfor .endif .else @${DO_NADA} .endif fetch-depends: _DEPENDS_USE build-depends: _DEPENDS_USE run-depends: _DEPENDS_USE misc-depends: uptodate-pkgtools .if defined(DEPENDS) .if !defined(NO_DEPENDS) .for dep in ${DEPENDS} ${_PKG_SILENT}${_PKG_DEBUG}package="`${ECHO} \"${dep}\" | ${SED} -e s/:.\*//`"; \ dir="`${ECHO} \"${dep}\" | ${SED} -e s/.\*://`"; \ found="`${PKG_INFO} -e \"$$package\" || ${TRUE}`"; \ if [ X"$$found" != X"" ]; then \ ${ECHO_MSG} "===> ${PKGNAME} depends on installed package: $$package - `${ECHO} $$found | ${SED} -e 's|${PKG_DBDIR}/||g' | tr '\012' '\040'` found"; \ else \ ${ECHO_MSG} "===> ${PKGNAME} depends on package: $$package"; \ target=${DEPENDS_TARGET}; \ ${ECHO_MSG} "===> Verifying $$target for $$dir"; \ if [ ! -d $$dir ]; then \ ${ECHO_MSG} ">> No directory for $$dir. Skipping.."; \ else \ (cd $$dir && ${MAKE} ${.MAKEFLAGS} $$target) && \ ${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \ fi; \ fi .endfor .endif # !NO_DEPENDS .else @${DO_NADA} .endif # DEPENDS .endif real-fetch: check-depends .if !target(check-depends) check-depends: .if (defined(DEPENDS) || defined(BUILD_DEPENDS) || defined(RUN_DEPENDS)) && \ !defined(NO_DEPENDS) && !defined(NO_CHECK_DEPENDS) && !exists(${EXTRACT_COOKIE}) ${_PKG_SILENT}${_PKG_DEBUG}${ECHO_MSG} "===> Validating dependencies for ${PKGNAME}" ${_PKG_SILENT}${_PKG_DEBUG}${MAKE} DEPENDS_TARGET=check-depends ECHO_MSG=${TRUE:Q} IGNORE_FAIL=1 _DEPENDS_TARGET_OVERRIDE=1 depends || \ (${ECHO_MSG} "===> ${PKGNAME} cannot build necessary dependencies."; ${FALSE}) .endif .endif .if !target(clean-depends) clean-depends: .if defined(BUILD_DEPENDS) || defined(DEPENDS) || defined(RUN_DEPENDS) @for dir in `${ECHO} ${BUILD_DEPENDS} ${DEPENDS} ${RUN_DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u`; do \ if [ -d $$dir ] ; then \ (cd $$dir && ${MAKE} CLEANDEPENDS=${CLEANDEPENDS} clean ); \ fi \ done .endif .endif .if !target(depends-list) depends-list: .for dir in ${BUILD_DEPENDS} ${DEPENDS} @cd ${dir:C/^[^:]*://:C/:.*//} && ${MAKE} package-name depends-list PACKAGE_NAME_TYPE=${PACKAGE_NAME_TYPE} .endfor .endif # If PACKAGES is set to the default (../../pkgsrc/packages), the current # ${MACHINE_ARCH} and "release" (uname -r) will be used. Otherwise a directory # structure of ...pkgsrc/packages/`uname -r`/${MACHINE_ARCH} is assumed. # The PKG_URL is set from FTP_PKG_URL_* or CDROM_PKG_URL_*, depending on # the target used to generate the README.html file. .if !target(binpkg-list) binpkg-list: @cd ${PACKAGES}; \ case `/bin/pwd` in \ */pkgsrc/packages) \ for pkg in ${PKGREPOSITORYSUBDIR}/${PKGNAME:C/-[^-]*$/-[0-9]*/}${PKG_SUFX} ; \ do \ if [ -f "$$pkg" ] ; then \ ${ECHO} "
Please note that this package has a ${LICENSE} license.
|' .else SED_LICENSE_EXPR= -e 's|%%LICENSE%%||' .endif # set up the "more info URL" information as a sed expression .ifdef HOMEPAGE SED_HOMEPAGE_EXPR= -e 's|%%HOMEPAGE%%|This package has a home page at ${HOMEPAGE}.
|' .else SED_HOMEPAGE_EXPR= -e 's|%%HOMEPAGE%%||' .endif .PHONY: README.html README.html: .PRECIOUS @${MAKE} depends-list PACKAGE_NAME_TYPE=html | sort -u >> $@.tmp1 @[ -s $@.tmp1 ] || ${ECHO} "(none)" >> $@.tmp1 @${MAKE} package-depends PACKAGE_NAME_TYPE=html | sort -u >> $@.tmp2 @[ -s $@.tmp2 ] || ${ECHO} "(none)" >> $@.tmp2 @${ECHO} ${PKGNAME} | ${HTMLIFY} >> $@.tmp3 @${MAKE} binpkg-list >> $@.tmp4 @[ -s $@.tmp4 ] || ${ECHO} "(no precompiled binaries available)" >> $@.tmp4 @${SED} -e 's|%%PORT%%|'"`${MAKE} package-path | ${HTMLIFY}`"'|g' \ -e '/%%PKG%%/r $@.tmp3' \ -e '/%%PKG%%/d' \ ${SED_LICENSE_EXPR} \ ${SED_HOMEPAGE_EXPR} \ -e '/%%COMMENT%%/r ${PKGDIR}/COMMENT' \ -e '/%%COMMENT%%/d' \ -e '/%%BUILD_DEPENDS%%/r $@.tmp1' \ -e '/%%BUILD_DEPENDS%%/d' \ -e '/%%RUN_DEPENDS%%/r $@.tmp2' \ -e '/%%RUN_DEPENDS%%/d' \ -e '/%%BIN_PKGS%%/r $@.tmp4' \ -e '/%%BIN_PKGS%%/d' \ ${README_NAME} >> $@.tmp @cmp -s $@.tmp $@ || \ (${ECHO_MSG} "===> Creating README.html for ${_THISDIR_}${PKGNAME}"; \ ${MV} -f $@.tmp $@) @${RM} -f $@.tmp $@.tmp1 $@.tmp2 $@.tmp3 $@.tmp4 $@.tmp5 .if !target(show-pkgtools-version) show-pkgtools-version: .if !exists(${IDENT}) @echo ${PKGTOOLS_REQD} .else @${IDENT} ${PKG_CREATE} ${PKG_DELETE} ${PKG_INFO} ${PKG_ADD} | ${AWK} '$$1 ~ /\$$NetBSD/ && $$2 !~ /^crt0/ { gsub("/", "", $$4); print $$4 }' | sort | ${TAIL} -n 1 .endif .endif .if !target(print-depends-list) print-depends-list: .if defined(BUILD_DEPENDS) || defined(DEPENDS) @${ECHO} -n 'This package requires package(s) "' @${ECHO} -n `${MAKE} depends-list | sort -u` @${ECHO} '" to build.' .endif .endif .if !target(print-package-depends) print-package-depends: .if defined(RUN_DEPENDS) || defined(DEPENDS) @${ECHO} -n 'This package requires package(s) "' @${ECHO} -n "`${MAKE} package-depends | sort -u`" @${ECHO} '" to run.' .endif .endif # Fake installation of package so that user can pkg_delete it later. # Also, make sure that an installed package is recognized correctly in # accordance to the @pkgdep directive in the packing lists .if !target(fake-pkg) fake-pkg: ${PLIST} ${DESCR} ${_PKG_SILENT}${_PKG_DEBUG}if [ ! -f ${PLIST} -o ! -f ${COMMENT} -o ! -f ${DESCR} ]; then \ ${ECHO} "** Missing package files for ${PKGNAME} - installation not recorded."; \ exit 1; \ fi ${_PKG_SILENT}${_PKG_DEBUG}if [ ! -d ${PKG_DBDIR} ]; then \ ${RM} -f ${PKG_DBDIR}; \ ${MKDIR} ${PKG_DBDIR}; \ fi .if defined(FORCE_PKG_REGISTER) ${_PKG_SILENT}${_PKG_DEBUG}${PKG_DELETE} -O ${PKGNAME} ${_PKG_SILENT}${_PKG_DEBUG}${RM} -rf ${PKG_DBDIR}/${PKGNAME} .endif ${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${BUILD_VERSION_FILE} ${BUILD_INFO_FILE} ${_PKG_SILENT}${_PKG_DEBUG}files=""; \ for f in ${.CURDIR}/Makefile ${FILESDIR}/* ${PKGDIR}/*; do \ if [ -f $$f ]; then \ files="$$files $$f"; \ fi; \ done; \ if [ -f ${PATCH_SUM_FILE} ]; then \ for f in `${AWK} '$$1 == "MD5" { gsub("[()]", "", $$2); print $$2 }' < ${PATCH_SUM_FILE}`; do \ if [ -f $$f ]; then \ files="$$files ${PATCHDIR}/$$f"; \ fi; \ done; \ fi; \ if [ -d ${PATCHDIR} ]; then \ for f in ${PATCHDIR}/patch-*; do \ case $$f in \ *.orig|*.rej|*~) ;; \ ${PATCHDIR}/patch-local-*) \ files="$$files $$f" ;; \ esac; \ done; \ fi; \ pkgsrcdir=`(cd ../.. && /bin/pwd)`; \ ${GREP} '\$$NetBSD' $$files | ${SED} -e 's|^'$$pkgsrcdir'/||' > ${BUILD_VERSION_FILE}; .for def in ${BUILD_DEFS} @${ECHO} "${def}= ${${def}}" | ${SED} -e 's|PATH=[^ ]*|PATH=...|' >> ${BUILD_INFO_FILE} .endfor @${ECHO} "CC= ${CC}-`${CC} --version`" >> ${BUILD_INFO_FILE} .ifdef USE_PERL5 @${ECHO} "PERL= `${LOCALBASE}/bin/perl --version | ${GREP} version`" >> ${BUILD_INFO_FILE} .endif .ifdef USE_GMAKE @${ECHO} "GMAKE= `${GMAKE} --version | ${GREP} version`" >> ${BUILD_INFO_FILE} .endif @${ECHO} "_PKGTOOLS_VER= `${MAKE} show-pkgtools-version`" >> ${BUILD_INFO_FILE} ${_PKG_SILENT}${_PKG_DEBUG}if [ ! -d ${PKG_DBDIR}/${PKGNAME} ]; then \ ${ECHO_MSG} "===> Registering installation for ${PKGNAME}"; \ ${MKDIR} ${PKG_DBDIR}/${PKGNAME}; \ ${PKG_CREATE} ${PKG_ARGS} -O ${PKGFILE} > ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \ ${CP} ${DESCR} ${PKG_DBDIR}/${PKGNAME}/+DESC; \ ${CP} ${COMMENT} ${PKG_DBDIR}/${PKGNAME}/+COMMENT; \ ${CP} ${BUILD_VERSION_FILE} ${PKG_DBDIR}/${PKGNAME}/+BUILD_VERSION; \ ${CP} ${BUILD_INFO_FILE} ${PKG_DBDIR}/${PKGNAME}/+BUILD_INFO; \ if [ -n "${INSTALL_FILE}" ]; then \ if ${TEST} -e ${INSTALL_FILE}; then \ ${CP} ${INSTALL_FILE} ${PKG_DBDIR}/${PKGNAME}/+INSTALL; \ fi; \ fi; \ if [ -n "${DEINSTALL_FILE}" ]; then \ if ${TEST} -e ${DEINSTALL_FILE}; then \ ${CP} ${DEINSTALL_FILE} ${PKG_DBDIR}/${PKGNAME}/+DEINSTALL; \ fi; \ fi; \ if [ -n "${REQ_FILE}" ]; then \ if ${TEST} -e ${REQ_FILE}; then \ ${CP} ${REQ_FILE} ${PKG_DBDIR}/${PKGNAME}/+REQUIRE; \ fi; \ fi; \ if [ -n "${MESSAGE_FILE}" ]; then \ if ${TEST} -e ${MESSAGE_FILE}; then \ ${CP} ${MESSAGE_FILE} ${PKG_DBDIR}/${PKGNAME}/+DISPLAY; \ fi; \ fi; \ for dep in `${MAKE} package-depends PACKAGE_DEPENDS_WITH_PATTERNS=true ECHO_MSG=${TRUE} | sort -u`; do \ realdep="`${PKG_INFO} -e \"$$dep\" || ${TRUE}`" ; \ ${ECHO} "a sanity check should be put in here to prevent some user having the pkg installed/registered twice somehow - HF" >/dev/null ; \ if ${TEST} -z $$realdep; then \ ${ECHO} "$$dep not installed - NOT registered" ; \ elif [ -d ${PKG_DBDIR}/$$realdep ]; then \ if ${TEST} ! -e ${PKG_DBDIR}/$$realdep/+REQUIRED_BY; then \ ${TOUCH} ${PKG_DBDIR}/$$realdep/+REQUIRED_BY; \ fi; \ ${AWK} 'BEGIN { found = 0; } \ $$0 == "${PKGNAME}" { found = 1; } \ { print $$0; } \ END { if (!found) { printf("%s\n", "${PKGNAME}"); }}' \ < ${PKG_DBDIR}/$$realdep/+REQUIRED_BY > ${PKG_DBDIR}/$$realdep/reqby.$$$$; \ ${MV} ${PKG_DBDIR}/$$realdep/reqby.$$$$ ${PKG_DBDIR}/$$realdep/+REQUIRED_BY; \ ${ECHO} "${PKGNAME} requires installed package $$realdep"; \ fi; \ done; \ fi .endif # Depend is generally meaningless for arbitrary packages, but if someone wants # one they can override this. This is just to catch people who've gotten into # the habit of typing `${MAKE} depend all install' as a matter of course. # .if !target(depend) depend: .endif # Same goes for tags .if !target(tags) tags: .endif # if automatic manual page compression is done by the package according # to MANZ's value, set MANCOMPRESSED if MANZ is set .if defined(MANCOMPRESSED_IF_MANZ) && defined(MANZ) MANCOMPRESSED= yes .endif # generate ${PLIST} from ${PLIST_SRC} by: # - fixing list of man-pages according to MANCOMPRESSED/MANZ # (we don't take any notice of MANCOMPRESSED as many packages have .gz # pages in PLIST even when they install manpages without compressing them) # - substituting by ${PLIST_SUBST} .if ${OPSYS} == "NetBSD" IMAKE_MAN_CMD= .ifdef MANZ MANZ_EXPRESSION= -e 's|\(^\([^/]*/\)*man/\([^/]*/\)\{0,1\}man[1-9ln]/.*[1-9ln]$$\)|\1.gz|' \ -e 's|\(^\([^/]*/\)*man/\([^/]*/\)\{0,1\}cat[1-9ln]/.*[0-9ln]$$\)|\1.gz|' .else MANZ_EXPRESSION= -e 's|\(^\([^/]*/\)*man/\([^/]*/\)\{0,1\}man[1-9ln]/.*[1-9ln]\)\.gz$$|\1|' \ -e 's|\(^\([^/]*/\)*man/\([^/]*/\)\{0,1\}cat[1-9ln]/.*[0-9ln]\)\.gz$$|\1|' .endif # MANZ MANZ_NAWK_CMD= .elif ${OPSYS} == "SunOS" .ifdef USE_IMAKE IMAKE_MAN_CMD= ${AWK} '/^([^\/]*\/)*man\/([^\/]*\/)?cat[1-9ln]\/.*[0-9ln](\.gz)?$$/ { \ sect = $$0; n = match(sect, "/cat[1-9ln]"); \ sect = sprintf(".%sx", substr(sect, n + 4, 1)); \ s = $$0; sub("/cat", "/man", s); sub("\.0(\.gz)?$$", sect, s); \ if (match($$0, "\.gz$$") > 0) { ext = ".gz";} else { ext = "";} \ $$0 = sprintf("%s%s", s, ext); \ } { print $$0; }' | .else IMAKE_MAN_CMD= .endif # USE_IMAKE .ifdef MANZ MANZ_NAWK_CMD= ${AWK} '/^([^\/]*\/)*man\/([^\/]*\/)?man[1-9ln]\/.*[1-9ln]\.gz$$/ { \ $$0 = sprintf("%s.gz", $$0); \ } \ /^([^\/]*\/)*man\/([^\/]*\/)?cat[1-9ln]\/.*[0-9ln]\.gz$$/ { \ $$0 = sprintf("%s.gz", $$0); \ } \ { print $$0; }' | .else MANZ_NAWK_CMD= ${AWK} '/^([^\/]*\/)*man\/([^\/]*\/)?man[1-9ln]\/.*[1-9ln]\.gz$$/ { \ $$0 = substr($$0, 1, length($$0) - 3); \ } \ /^([^\/]*\/)*man\/([^\/]*\/)?cat[1-9ln]\/.*[0-9ln]\.gz$$/ { \ $$0 = substr($$0, 1, length($$0) - 3); \ } \ { print $$0; }' | .endif # MANZ MANZ_EXPRESSION= .endif # SunOS ${PLIST}: ${PLIST_SRC} ${_PKG_SILENT}${_PKG_DEBUG} \ if [ -z "${PLIST_SRC}" ]; then \ ${ECHO} "No ${PKGDIR}/PLIST or ${PKGDIR}/PLIST-{mi,md.shared,md.static}" ; \ ${ECHO} "Please set PLIST_SRC in the package Makefile.";\ else \ ${CAT} ${PLIST_SRC} | \ ${MANZ_NAWK_CMD} \ ${IMAKE_MAN_CMD} \ ${SED} ${MANZ_EXPRESSION} \ ${PLIST_SUBST:S/=/}!/:S/$/!g/:S/^/ -e s!\\\${/}\ > ${PLIST}; \ fi # generate ${DESCR} from ${DESCR_SRC} by: # - Appending the homepage URL, if any ${DESCR}: ${DESCR_SRC} @${CAT} ${DESCR_SRC} > ${DESCR} .if defined(HOMEPAGE) @(${ECHO} ; ${ECHO} "Homepage:" ; \ ${ECHO} '${HOMEPAGE}') >> ${DESCR} .endif