# $NetBSD: bsd.pkg.mk,v 1.1612 2005/04/16 09:20:18 agc Exp $
#
# This file is in the public domain.
#
# This file is derived from bsd.port.mk - 940820 Jordan K. Hubbard.
#
# Please see the pkgsrc/doc/guide manual for details on the
# variables used in this make file template.
#
# Default sequence for "all" is: fetch checksum extract patch configure build
#
# Please read the comments in the targets section below, you
# should be able to use the pre-* or post-* targets/scripts
# (which are available for every stage except checksum) or
# override the do-* targets to do pretty much anything you want.
############################################################################
# Include any preferences, if not already included, and common definitions
############################################################################
.include "../../mk/bsd.prefs.mk"
.include "../../mk/bsd.hacks.mk"
# This has to come first to avoid showing all BUILD_DEFS added by this
# Makefile, which are usually not customizable.
.PHONY: pre-install-depends build-defs-message
pre-install-depends: build-defs-message
.if empty(PKGSRC_SHOW_BUILD_DEFS:M[yY][eE][sS])
build-defs-message:
.elif !target(build-defs-message)
build-defs-message: ${WRKDIR}
. if defined(BUILD_DEFS) && !empty(BUILD_DEFS)
. if !exists(${WRKDIR}/.bdm_done)
@${ECHO} "=========================================================================="
@${ECHO} "The following variables will affect the build process of this package,"
@${ECHO} "${PKGNAME}. Their current value is shown below:"
@${ECHO} ""
. for var in ${BUILD_DEFS:O}
. if !defined(${var})
@${ECHO} " * ${var} (not defined)"
. elif defined(${var}) && empty(${var})
@${ECHO} " * ${var} (defined)"
. else
@${ECHO} " * ${var} = ${${var}}"
. endif
. endfor
@${ECHO} ""
@${ECHO} "You may want to abort the process now with CTRL-C and change their value"
@${ECHO} "before continuing. Be sure to run \`${MAKE} clean' after"
@${ECHO} "the changes."
@${ECHO} "=========================================================================="
@${TOUCH} ${WRKDIR}/.bdm_done
. endif
. endif
.endif
############################################################################
# Transform package Makefile variables and set defaults
############################################################################
CHECK_FILES?= NO # run check-files after install
CHECK_FILES_STRICT?= NO # make check-files very strict on errors
CHECK_SHLIBS?= YES # run check-shlibs after install
CLEANDEPENDS?= NO
DEINSTALLDEPENDS?= NO # add -R to pkg_delete
MKCRYPTO?= YES # build crypto packages by default
NOCLEAN?= NO # don't clean up after update
REINSTALL?= NO # reinstall upon update
SHLIB_HANDLING?= YES # do automatic shared lib handling
##### Variant spellings
.if defined(LICENCE) && !defined(LICENSE)
LICENSE= ${LICENCE}
.endif
.if defined(ACCEPTABLE_LICENCES) && !defined(ACCEPTABLE_LICENSES)
ACCEPTABLE_LICENSES= ${ACCEPTABLE_LICENCES}
.endif
##### PKGBASE, PKGNAME[_NOREV], PKGVERSION
PKGBASE?= ${PKGNAME:C/-[^-]*$//}
PKGVERSION?= ${PKGNAME:C/^.*-//}
.if defined(PKGREVISION) && !empty(PKGREVISION) && (${PKGREVISION} != "0")
. if defined(PKGNAME)
PKGNAME_NOREV:= ${PKGNAME}
PKGNAME:= ${PKGNAME}nb${PKGREVISION}
. else
PKGNAME?= ${DISTNAME}nb${PKGREVISION}
PKGNAME_NOREV= ${DISTNAME}
. endif
.else
PKGNAME?= ${DISTNAME}
PKGNAME_NOREV= ${PKGNAME}
.endif
##### PLIST
.if ${PKG_INSTALLATION_TYPE} == "pkgviews"
PLIST_TYPE?= dynamic
.endif
PLIST_TYPE?= static
.if !defined(PLIST_SRC)
. if exists(${PKGDIR}/PLIST.common)
PLIST_SRC+= ${PKGDIR}/PLIST.common
. endif
. if exists(${PKGDIR}/PLIST.${OPSYS})
PLIST_SRC+= ${PKGDIR}/PLIST.${OPSYS}
. endif
. if exists(${PKGDIR}/PLIST.${MACHINE_ARCH:C/i[3-6]86/i386/g})
PLIST_SRC+= ${PKGDIR}/PLIST.${MACHINE_ARCH:C/i[3-6]86/i386/g}
. endif
. if exists(${PKGDIR}/PLIST.${OPSYS}-${MACHINE_ARCH:C/i[3-6]86/i386/g})
PLIST_SRC+= ${PKGDIR}/PLIST.${OPSYS}-${MACHINE_ARCH:C/i[3-6]86/i386/g}
. endif
. if exists(${PKGDIR}/PLIST)
PLIST_SRC+= ${PKGDIR}/PLIST
. endif
. if exists(${PKGDIR}/PLIST.common_end)
PLIST_SRC+= ${PKGDIR}/PLIST.common_end
. endif
.endif # !PLIST_SRC
##### Others
_DISTDIR?= ${DISTDIR}/${DIST_SUBDIR}
BUILD_DEPENDS?= # empty
BUILD_TARGET?= all
COMMENT?= (no description)
CONFIGURE_DIRS?= ${WRKSRC}
CONFIGURE_SCRIPT?= ./configure
DEPENDS?= # empty
DESCR_SRC?= ${PKGDIR}/DESCR
DIGEST_ALGORITHMS?= SHA1 RMD160
DISTFILES?= ${DISTNAME}${EXTRACT_SUFX}
DISTINFO_FILE?= ${PKGDIR}/distinfo
EXTRACT_ONLY?= ${DISTFILES}
EXTRACT_SUFX?= .tar.gz
INSTALL_DIRS?= ${BUILD_DIRS}
INSTALL_MAKE_FLAGS?= ${MAKE_FLAGS}
INSTALL_TARGET?= install
INTERACTIVE_STAGE?= none
MAINTAINER?= tech-pkg@NetBSD.org
MAKE_FLAGS?= # empty
MAKEFILE?= Makefile
PATCH_DIGEST_ALGORITHM?=SHA1
PKG_SUFX?= .tgz
PKGFILE?= ${PKGREPOSITORY}/${PKGNAME}${PKG_SUFX}
PKGREPOSITORY?= ${PACKAGES}/${PKGREPOSITORYSUBDIR}
PKGREPOSITORYSUBDIR?= All
PKGWILDCARD?= ${PKGBASE}-[0-9]*
SVR4_PKGNAME?= ${PKGNAME}
USE_DIGEST?= YES
USE_GNU_TOOLS?= # empty
WRKSRC?= ${WRKDIR}/${DISTNAME}
.if (defined(INSTALL_UNSTRIPPED) && !empty(INSTALL_UNSTRIPPED:M[yY][eE][sS])) || defined(DEBUG_FLAGS)
_INSTALL_UNSTRIPPED= # set (flag used by platform/*.mk)
.endif
##### Non-overridable constants
# Latest versions of tools required for correct pkgsrc operation.
DIGEST_REQD= 20010302
PKGTOOLS_REQD= ${_OPSYS_PKGTOOLS_REQD:U20050204}
PKG_DB_TMPDIR= ${WRKDIR}/.pkgdb
DDIR= ${WRKDIR}/.DDIR
DESCR= ${PKG_DB_TMPDIR}/+DESC
DLIST= ${WRKDIR}/.DLIST
PLIST= ${WRKDIR}/.PLIST
# Files to create for versioning and build information
BUILD_VERSION_FILE= ${PKG_DB_TMPDIR}/+BUILD_VERSION
BUILD_INFO_FILE= ${PKG_DB_TMPDIR}/+BUILD_INFO
# Files containing size of pkg w/o and w/ all required pkgs
SIZE_PKG_FILE= ${PKG_DB_TMPDIR}/+SIZE_PKG
SIZE_ALL_FILE= ${PKG_DB_TMPDIR}/+SIZE_ALL
# File to denote "no deletion of a package"
PRESERVE_FILE= ${PKG_DB_TMPDIR}/+PRESERVE
##### Transform USE_* into dependencies
.include "../../mk/bsd.pkg.use.mk"
############################################################################
# Sanity checks
############################################################################
# Fail-safe in the case of circular dependencies
.if defined(_PKGSRC_DEPS) && defined(PKGNAME) && !empty(_PKGSRC_DEPS:M${PKGNAME})
PKG_FAIL_REASON+= "Circular dependency detected"
.endif
# PKG_INSTALLATION_TYPE can only be one of two values: "pkgviews" or
# "overwrite".
.if (${PKG_INSTALLATION_TYPE} != "pkgviews") && \
(${PKG_INSTALLATION_TYPE} != "overwrite")
PKG_FAIL_REASON+= "PKG_INSTALLATION_TYPE must be \`\`pkgviews'' or \`\`overwrite''."
.endif
.if empty(PKG_INSTALLATION_TYPES:M${PKG_INSTALLATION_TYPE})
PKG_FAIL_REASON+= "This package doesn't support PKG_INSTALLATION_TYPE=${PKG_INSTALLATION_TYPE}."
.endif
.if (${PLIST_TYPE} != "dynamic") && (${PLIST_TYPE} != "static")
PKG_FAIL_REASON+= "PLIST_TYPE must be \`\`dynamic'' or \`\`static''."
.endif
.if (${PKG_INSTALLATION_TYPE} == "overwrite") && (${PLIST_TYPE} != "static")
PKG_FAIL_REASON+= "PLIST_TYPE must be \`\`static'' for \`\`overwrite'' packages."
.endif
# Check that we are using up-to-date pkg_* tools with this file.
.if !defined(NO_PKGTOOLS_REQD_CHECK)
. if ${PKGTOOLS_VERSION} < ${PKGTOOLS_REQD}
PKG_FAIL_REASON+='Error: The package tools installed on this system are out of date.'
PKG_FAIL_REASON+='The installed package tools are dated ${PKGTOOLS_VERSION:C|(....)(..)(..)|\1/\2/\3|} and you must update'
PKG_FAIL_REASON+='them to at least ${PKGTOOLS_REQD:C|(....)(..)(..)|\1/\2/\3|} using the following command:'
PKG_FAIL_REASON+=''
PKG_FAIL_REASON+=' cd ${PKGSRCDIR}/pkgtools/pkg_install && ${MAKE} clean && ${MAKE} install'
. endif
.endif # !NO_PKGTOOLS_REQD_CHECK
.if defined(ALL_TARGET)
PKG_FAIL_REASON+='ALL_TARGET is deprecated and must be replaced with BUILD_TARGET.'
.endif
.if defined(NO_WRKSUBDIR)
PKG_FAIL_REASON+='NO_WRKSUBDIR has been deprecated - please replace it with an explicit'
PKG_FAIL_REASON+='assignment of WRKSRC= $${WRKDIR}'
.endif # NO_WRKSUBDIR
# We need to make sure the buildlink-x11 package is not installed since it
# breaks builds that use imake.
.if defined(USE_IMAKE)
. if exists(${LOCALBASE}/lib/X11/config/buildlinkX11.def) || \
exists(${X11BASE}/lib/X11/config/buildlinkX11.def)
PKG_FAIL_REASON+= "${PKGNAME} uses imake, but the buildlink-x11 package was found." \
" Please deinstall it (pkg_delete buildlink-x11)."
. endif
.endif # USE_IMAKE
.if !defined(CATEGORIES) || !defined(DISTNAME)
PKG_FAIL_REASON+='CATEGORIES and DISTNAME are mandatory.'
.endif
.if defined(LIB_DEPENDS)
PKG_FAIL_REASON+='LIB_DEPENDS is deprecated and must be replaced with DEPENDS.'
.endif
.if defined(PKG_PATH)
PKG_FAIL_REASON+='Please unset PKG_PATH before doing pkgsrc work!'
.endif
.if defined(MASTER_SITE_SUBDIR)
PKG_FAIL_REASON+='MASTER_SITE_SUBDIR is deprecated and must be replaced with MASTER_SITES.'
.endif
.if defined(PATCH_SITE_SUBDIR)
PKG_FAIL_REASON+='PATCH_SITE_SUBDIR is deprecated and must be replaced with PATCH_SITES.'
.endif
.if defined(ONLY_FOR_ARCHS) || defined(NOT_FOR_ARCHS) \
|| defined(ONLY_FOR_OPSYS) || defined(NOT_FOR_OPSYS)
PKG_FAIL_REASON+='ONLY/NOT_FOR_ARCHS/OPSYS are deprecated and must be replaced with ONLY/NOT_FOR_PLATFORM.'
.endif
.if (${PKGSRC_LOCKTYPE} == "sleep" || ${PKGSRC_LOCKTYPE} == "once")
. if !defined(OBJHOSTNAME)
PKG_FAIL_REASON+='PKGSRC_LOCKTYPE needs OBJHOSTNAME defined.'
. elif !exists(${SHLOCK})
PKG_FAIL_REASON+='The ${SHLOCK} utility does not exist, and is necessary for locking.'
PKG_FAIL_REASON+='Please "${MAKE} install" in ../../pkgtools/shlock.'
. endif
.endif
# Allow variables to be set on a per-OS basis
OPSYSVARS+= CFLAGS CXXFLAGS CPPFLAGS LDFLAGS LIBS
.for _var_ in ${OPSYSVARS:O}
. if defined(${_var_}.${OPSYS})
${_var_}+= ${${_var_}.${OPSYS}}
. elif defined(${_var_}.*)
${_var_}+= ${${_var_}.*}
. endif
.endfor
CPPFLAGS+= ${CPP_PRECOMP_FLAGS}
ALL_ENV+= CC=${CC:Q}
ALL_ENV+= CFLAGS=${CFLAGS:Q}
ALL_ENV+= CPPFLAGS=${CPPFLAGS:Q}
ALL_ENV+= CXX=${CXX:Q}
ALL_ENV+= CXXFLAGS=${CXXFLAGS:Q}
ALL_ENV+= COMPILER_RPATH_FLAG=${COMPILER_RPATH_FLAG:Q}
ALL_ENV+= F77=${FC:Q}
ALL_ENV+= FC=${FC:Q}
ALL_ENV+= FFLAGS=${FFLAGS:Q}
ALL_ENV+= LANG=C
ALL_ENV+= LC_COLLATE=C
ALL_ENV+= LC_CTYPE=C
ALL_ENV+= LC_MESSAGES=C
ALL_ENV+= LC_MONETARY=C
ALL_ENV+= LC_NUMERIC=C
ALL_ENV+= LC_TIME=C
ALL_ENV+= LDFLAGS=${LDFLAGS:Q}
ALL_ENV+= LINKER_RPATH_FLAG=${LINKER_RPATH_FLAG:Q}
ALL_ENV+= PATH=${PATH:Q}:${LOCALBASE}/bin:${X11BASE}/bin
ALL_ENV+= PREFIX=${PREFIX}
MAKE_ENV+= ${ALL_ENV}
MAKE_ENV+= ${NO_EXPORT_CPP:D:UCPP=${CPP:Q}}
MAKE_ENV+= LINK_ALL_LIBGCC_HACK=${LINK_ALL_LIBGCC_HACK:Q}
MAKE_ENV+= LOCALBASE=${LOCALBASE}
MAKE_ENV+= NO_WHOLE_ARCHIVE_FLAG=${NO_WHOLE_ARCHIVE_FLAG:Q}
MAKE_ENV+= WHOLE_ARCHIVE_FLAG=${WHOLE_ARCHIVE_FLAG:Q}
MAKE_ENV+= X11BASE=${X11BASE}
MAKE_ENV+= X11PREFIX=${X11PREFIX}
# Constants to provide a consistent environment for packages using
# BSD-style Makefiles.
MAKE_ENV+= MAKECONF=${PKGMAKECONF:U/dev/null}
MAKE_ENV+= OBJECT_FMT=${OBJECT_FMT:Q}
MAKE_ENV+= ${USETOOLS:DUSETOOLS=${USETOOLS:Q}}
SCRIPTS_ENV+= ${ALL_ENV}
SCRIPTS_ENV+= _PKGSRCDIR=${_PKGSRCDIR}
SCRIPTS_ENV+= ${BATCH:DBATCH=yes}
SCRIPTS_ENV+= CURDIR=${.CURDIR}
SCRIPTS_ENV+= DEPENDS=${DEPENDS:Q}
SCRIPTS_ENV+= DISTDIR=${DISTDIR}
SCRIPTS_ENV+= FILESDIR=${FILESDIR}
SCRIPTS_ENV+= LOCALBASE=${LOCALBASE}
SCRIPTS_ENV+= PATCHDIR=${PATCHDIR}
SCRIPTS_ENV+= PKGSRCDIR=${PKGSRCDIR}
SCRIPTS_ENV+= SCRIPTDIR=${SCRIPTDIR}
SCRIPTS_ENV+= VIEWBASE=${VIEWBASE}
SCRIPTS_ENV+= WRKDIR=${WRKDIR}
SCRIPTS_ENV+= WRKSRC=${WRKSRC}
SCRIPTS_ENV+= X11BASE=${X11BASE}
CONFIGURE_ENV+= ${ALL_ENV}
# Store the result in the +BUILD_INFO file so we can query for the build
# options using "pkg_info -Q PKG_OPTIONS <pkg>".
#
.if defined(PKG_SUPPORTED_OPTIONS) && defined(PKG_OPTIONS)
BUILD_DEFS+= PKG_OPTIONS
.endif
.if empty(DEPOT_SUBDIR)
PKG_FAIL_REASON+= "DEPOT_SUBDIR may not be empty."
.endif
.if ${PKG_INSTALLATION_TYPE} == "pkgviews"
#
# _PLIST_IGNORE_FILES basically mirrors the list of ignored files found
# in pkg_views(1). It's used by the dynamic PLIST generator to skip
# adding the named files to the PLIST.
#
_PLIST_IGNORE_FILES= +* # package metadata files
_PLIST_IGNORE_FILES+= info/dir
.if defined(INFO_DIR) && empty(INFO_DIR:Minfo)
_PLIST_IGNORE_FILES+= ${INFO_DIR}/dir
.endif
_PLIST_IGNORE_FILES+= *[~\#] *.OLD *.orig *,v # scratch config files
_PLIST_IGNORE_FILES+= ${PLIST_IGNORE_FILES}
.endif
BUILD_DEFS+= _PLIST_IGNORE_FILES
.if !empty(USE_GNU_TOOLS:Mmake)
_USE_GMAKE= yes
.endif
.if defined(_USE_GMAKE)
MAKE_PROGRAM= ${GMAKE}
.elif defined(USE_IMAKE)
. if ${_IMAKE_MAKE} == ${GMAKE}
USE_GNU_TOOLS+= make
. endif
MAKE_PROGRAM= ${_IMAKE_MAKE}
.else
MAKE_PROGRAM= ${MAKE}
.endif
CONFIGURE_ENV+= MAKE="${MAKE_PROGRAM:T}"
# Automatically increase process limit where necessary for building.
_ULIMIT_CMD=
.if defined(UNLIMIT_RESOURCES)
. for __tmp__ in ${UNLIMIT_RESOURCES}
. if defined(ULIMIT_CMD_${__tmp__})
_ULIMIT_CMD+= ${ULIMIT_CMD_${__tmp__}} ;
. endif
. endfor
.endif
# If GNU_CONFIGURE is defined, then pass LIBS to the GNU configure script.
# also pass in a CONFIG_SHELL to avoid picking up bash
.if defined(GNU_CONFIGURE)
CONFIG_SHELL?= ${SH}
CONFIGURE_ENV+= CONFIG_SHELL=${CONFIG_SHELL}
CONFIGURE_ENV+= LIBS=${LIBS:Q}
CONFIGURE_ENV+= install_sh=${INSTALL:Q}
. if defined(USE_LIBTOOL) && defined(_OPSYS_MAX_CMDLEN_CMD)
CONFIGURE_ENV+= lt_cv_sys_max_cmd_len=${_OPSYS_MAX_CMDLEN_CMD:sh}
. endif
.endif
EXTRACT_COOKIE= ${WRKDIR}/.extract_done
WRAPPER_COOKIE= ${WRKDIR}/.wrapper_done
CONFIGURE_COOKIE= ${WRKDIR}/.configure_done
INSTALL_COOKIE= ${WRKDIR}/.install_done
TEST_COOKIE= ${WRKDIR}/.test_done
BUILD_COOKIE= ${WRKDIR}/.build_done
PATCH_COOKIE= ${WRKDIR}/.patch_done
TOOLS_COOKIE= ${WRKDIR}/.tools_done
PACKAGE_COOKIE= ${WRKDIR}/.package_done
INTERACTIVE_COOKIE= .interactive_stage
NULL_COOKIE= ${WRKDIR}/.null
# Miscellaneous overridable commands:
SHCOMMENT?= ${ECHO_MSG} >/dev/null '***'
LIBABISUFFIX?=
CONFIGURE_ENV+= M4="${M4}" YACC="${YACC}"
TOUCH_FLAGS?= -f
# determine if we need a working patch(1).
.if defined(_OPSYS_GPATCH_REQD) && !empty(_OPSYS_GPATCH_REQD:M[yY][eE][sS])
_NEED_PATCH= YES
.else
_NEED_PATCH!= if [ -d ${PATCHDIR} ]; then \
if [ "`${ECHO} ${PATCHDIR}/patch-*`" != "${PATCHDIR}/patch-*" ]; then \
${ECHO} YES; \
else \
${ECHO} NO; \
fi \
else \
${ECHO} NO; \
fi
.endif
.if defined(PATCHFILES)
_NEED_PATCH= YES
.endif
.if ${_NEED_PATCH} == "YES"
USE_GNU_TOOLS+= patch
.endif
.if defined(PATCH_DEBUG) || defined(PKG_VERBOSE)
PATCH_DEBUG_TMP= yes
.else
PATCH_DEBUG_TMP= no
.endif
PATCH_STRIP?= -p0
.if ${PATCH_DEBUG_TMP} == "yes"
PATCH_ARGS?= -d ${WRKSRC} -E ${PATCH_STRIP}
.else
PATCH_ARGS?= -d ${WRKSRC} --forward --quiet -E ${PATCH_STRIP}
.endif
.if defined(BATCH)
PATCH_ARGS+= --batch
.endif
.if defined(_PATCH_CAN_BACKUP) && (${_PATCH_CAN_BACKUP} == "yes")
PATCH_ARGS+= ${_PATCH_BACKUP_ARG} .orig
.endif
PATCH_FUZZ_FACTOR?= -F0 # Default to zero fuzz
# The following variables control how "distribution" patches are extracted
# and applied to the package sources.
#
# PATCH_DIST_STRIP is a patch option that sets the pathname strip count.
# PATCH_DIST_ARGS is the list of arguments to pass to the patch command.
# PATCH_DIST_CAT is the command that outputs the patch to stdout.
#
# For each of these variables, there is a patch-specific variant that
# may be set, i.e. PATCH_DIST_STRIP.<patch>, PATCH_DIST_ARGS.<patch>,
# PATCH_DIST_CAT.<patch>.
#
PATCH_DIST_STRIP?= -p0
.for i in ${PATCHFILES}
PATCH_DIST_STRIP.${i:S/=/--/}?= ${PATCH_DIST_STRIP}
. if defined(PATCH_DIST_ARGS)
PATCH_DIST_ARGS.${i:S/=/--/}?= ${PATCH_DIST_ARGS}
. elif ${PATCH_DEBUG_TMP} == "yes"
PATCH_DIST_ARGS.${i:S/=/--/}?= -d ${WRKSRC} -E ${PATCH_DIST_STRIP.${i:S/=/--/}}
. else
PATCH_DIST_ARGS.${i:S/=/--/}?= -d ${WRKSRC} --forward --quiet -E ${PATCH_DIST_STRIP.${i:S/=/--/}}
. endif
.endfor
.if defined(BATCH)
PATCH_DIST_ARGS+= --batch
. for i in ${PATCHFILES}
PATCH_DIST_ARGS.${i:S/=/--/}+= --batch
. endfor
.endif
.if defined(_PATCH_CAN_BACKUP) && (${_PATCH_CAN_BACKUP} == "yes")
PATCH_DIST_ARGS+= ${_PATCH_BACKUP_ARG} .orig_dist
. for i in ${PATCHFILES}
PATCH_DIST_ARGS.${i:S/=/--/}+= ${_PATCH_BACKUP_ARG} .orig_dist
. endfor
.endif
PATCH_DIST_CAT?= { case $$patchfile in \
*.Z|*.gz) ${GZCAT} $$patchfile ;; \
*.bz2) ${BZCAT} $$patchfile ;; \
*) ${CAT} $$patchfile ;; \
esac; }
.for i in ${PATCHFILES}
PATCH_DIST_CAT.${i:S/=/--/}?= { patchfile=${i}; ${PATCH_DIST_CAT}; }
.endfor
.if empty(PKGSRC_SHOW_PATCH_ERRORMSG:M[yY][eE][sS])
PKGSRC_PATCH_FAIL= exit 1
.else
PKGSRC_PATCH_FAIL= \
if [ -n "${PKG_OPTIONS}" ] || [ -n "${_LOCALPATCHFILES}" ]; then \
${ECHO} "=========================================================================="; \
${ECHO}; \
${ECHO} "Some of the selected build options and/or local patches may be incompatible."; \
${ECHO} "Please try building with fewer options or patches."; \
${ECHO}; \
${ECHO} "=========================================================================="; \
fi; exit 1
.endif
# We need bzip2 for PATCHFILES with .bz2 suffix.
.if defined(PATCHFILES)
. if !empty(PATCHFILES:M*.bz2) && ${EXTRACT_SUFX} != ".tar.bz2"
. if exists(/usr/bin/bzcat)
BZCAT= /usr/bin/bzcat
. else
BZCAT= ${LOCALBASE}/bin/bzcat
BUILD_DEPENDS+= bzip2>=0.9.0b:../../archivers/bzip2
. endif # !exists bzcat
. endif
.endif # defined(PATCHFILES)
# Figure out where the local mtree file is
MTREE_FILE?= ${PKGSRCDIR}/mk/${OPSYS}.pkg.dist
MTREE_ARGS?= -U -f ${MTREE_FILE} -d -e -p
# Debugging levels for this file, dependent on PKG_DEBUG_LEVEL definition
# 0 == normal, default, quiet operation
# 1 == all shell commands echoed before invocation
# 2 == shell "set -x" operation
PKG_DEBUG_LEVEL?= 0
_PKG_SILENT= @
_PKG_DEBUG= # empty
_PKG_DEBUG_SCRIPT= # empty
.if ${PKG_DEBUG_LEVEL} > 0
_PKG_SILENT= # empty
.endif
.if ${PKG_DEBUG_LEVEL} > 1
_PKG_DEBUG= set -x;
_PKG_DEBUG_SCRIPT= ${SH} -x
.endif
# A few aliases for *-install targets
INSTALL_PROGRAM?= \
${INSTALL} ${COPY} ${_STRIPFLAG_INSTALL} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
INSTALL_GAME?= \
${INSTALL} ${COPY} ${_STRIPFLAG_INSTALL} -o ${GAMEOWN} -g ${GAMEGRP} -m ${GAMEMODE}
INSTALL_SCRIPT?= \
${INSTALL} ${COPY} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
INSTALL_LIB?= \
${INSTALL} ${COPY} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
INSTALL_DATA?= \
${INSTALL} ${COPY} -o ${SHAREOWN} -g ${SHAREGRP} -m ${SHAREMODE}
INSTALL_GAME_DATA?= \
${INSTALL} ${COPY} -o ${GAMEOWN} -g ${GAMEGRP} -m ${GAMEDATAMODE}
INSTALL_MAN?= \
${INSTALL} ${COPY} -o ${MANOWN} -g ${MANGRP} -m ${MANMODE}
INSTALL_PROGRAM_DIR?= \
${INSTALL} -d -o ${BINOWN} -g ${BINGRP} -m ${PKGDIRMODE}
INSTALL_SCRIPT_DIR?= \
${INSTALL_PROGRAM_DIR}
INSTALL_LIB_DIR?= \
${INSTALL_PROGRAM_DIR}
INSTALL_DATA_DIR?= \
${INSTALL} -d -o ${SHAREOWN} -g ${SHAREGRP} -m ${PKGDIRMODE}
INSTALL_MAN_DIR?= \
${INSTALL} -d -o ${MANOWN} -g ${MANGRP} -m ${PKGDIRMODE}
INSTALL_MACROS= BSD_INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
BSD_INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
BSD_INSTALL_LIB="${INSTALL_LIB}" \
BSD_INSTALL_DATA="${INSTALL_DATA}" \
BSD_INSTALL_MAN="${INSTALL_MAN}" \
BSD_INSTALL="${INSTALL}" \
BSD_INSTALL_PROGRAM_DIR="${INSTALL_PROGRAM_DIR}" \
BSD_INSTALL_SCRIPT_DIR="${INSTALL_SCRIPT_DIR}" \
BSD_INSTALL_LIB_DIR="${INSTALL_LIB_DIR}" \
BSD_INSTALL_DATA_DIR="${INSTALL_DATA_DIR}" \
BSD_INSTALL_MAN_DIR="${INSTALL_MAN_DIR}" \
BSD_INSTALL_GAME="${INSTALL_GAME}" \
BSD_INSTALL_GAME_DATA="${INSTALL_GAME_DATA}"
MAKE_ENV+= ${INSTALL_MACROS}
SCRIPTS_ENV+= ${INSTALL_MACROS}
# The user can override the NO_PACKAGE by specifying this from
# the make command line
.if defined(FORCE_PACKAGE)
. undef NO_PACKAGE
.endif
# Set PLIST_SUBST to substitute "${variable}" to "value" in PLIST
PLIST_SUBST+= OPSYS=${OPSYS} \
OS_VERSION=${OS_VERSION} \
MACHINE_ARCH=${MACHINE_ARCH} \
MACHINE_GNU_ARCH=${MACHINE_GNU_ARCH} \
MACHINE_GNU_PLATFORM=${MACHINE_GNU_PLATFORM} \
LN=${LN:Q} \
LOWER_VENDOR=${LOWER_VENDOR} \
LOWER_OPSYS=${LOWER_OPSYS} \
LOWER_OS_VERSION=${LOWER_OS_VERSION} \
PKGBASE=${PKGBASE} \
PKGNAME=${PKGNAME_NOREV} \
PKGLOCALEDIR=${PKGLOCALEDIR} \
PKGVERSION=${PKGVERSION:C/nb[0-9]*$//} \
LOCALBASE=${LOCALBASE} \
VIEWBASE=${VIEWBASE} \
X11BASE=${X11BASE} \
X11PREFIX=${X11PREFIX} \
SVR4_PKGNAME=${SVR4_PKGNAME} \
CHGRP=${CHGRP:Q} \
CHMOD=${CHMOD:Q} \
CHOWN=${CHOWN:Q} \
MKDIR=${MKDIR:Q} \
RMDIR=${RMDIR:Q} \
RM=${RM:Q} \
TRUE=${TRUE:Q} \
QMAILDIR=${QMAILDIR}
# Handle alternatives
#
.include "../../mk/alternatives.mk"
# CONF_DEPENDS notes a dependency where the config directory for the
# package matches the dependency's config directory. CONF_DEPENDS is
# only meaningful if ${PKG_INSTALLATION_TYPE} == "pkgviews".
#
CONF_DEPENDS?= # empty
.if !empty(CONF_DEPENDS)
USE_PKGINSTALL= yes
.endif
.if defined(USE_PKGINSTALL) && !empty(USE_PKGINSTALL:M[yY][eE][sS])
. include "../../mk/bsd.pkg.install.mk"
.endif
# Set INSTALL_FILE to be the name of any INSTALL file
.if !defined(INSTALL_FILE) && exists(${PKGDIR}/INSTALL)
INSTALL_FILE= ${PKGDIR}/INSTALL
.endif
# Set DEINSTALL_FILE to be the name of any DEINSTALL file
.if !defined(DEINSTALL_FILE) && exists(${PKGDIR}/DEINSTALL)
DEINSTALL_FILE= ${PKGDIR}/DEINSTALL
.endif
# If MESSAGE hasn't been defined, then set MESSAGE_SRC to be a space-separated
# list of files to be concatenated together to generate the MESSAGE file.
#
.if !defined(MESSAGE_SRC) && !defined(MESSAGE)
. if exists(${PKGDIR}/MESSAGE)
MESSAGE_SRC= ${PKGDIR}/MESSAGE
. else
. if exists(${PKGDIR}/MESSAGE.common)
MESSAGE_SRC= ${PKGDIR}/MESSAGE.common
. endif
. if exists(${PKGDIR}/MESSAGE.${OPSYS})
MESSAGE_SRC+= ${PKGDIR}/MESSAGE.${OPSYS}
. endif
. if exists(${PKGDIR}/MESSAGE.${MACHINE_ARCH:C/i[3-6]86/i386/g})
MESSAGE_SRC+= ${PKGDIR}/MESSAGE.${MACHINE_ARCH:C/i[3-6]86/i386/g}
. endif
. if exists(${PKGDIR}/MESSAGE.${OPSYS}-${MACHINE_ARCH:C/i[3-6]86/i386/g})
MESSAGE_SRC+= ${PKGDIR}/MESSAGE.${OPSYS}-${MACHINE_ARCH:C/i[3-6]86/i386/g}
. endif
. endif
.endif
.if defined(MESSAGE_SRC)
MESSAGE= ${PKG_DB_TMPDIR}/+DISPLAY
# Set MESSAGE_SUBST to substitute "${variable}" to "value" in MESSAGE
MESSAGE_SUBST+= PKGNAME=${PKGNAME} \
PREFIX=${PREFIX} \
LOCALBASE=${LOCALBASE} \
VIEWBASE=${VIEWBASE} \
X11PREFIX=${X11PREFIX} \
X11BASE=${X11BASE} \
PKG_SYSCONFDIR=${PKG_SYSCONFDIR} \
ROOT_GROUP=${ROOT_GROUP} \
ROOT_USER=${ROOT_USER} \
QMAILDIR=${QMAILDIR}
MESSAGE_SUBST_SED= ${MESSAGE_SUBST:S/=/}!/:S/$/!g/:S/^/ -e s!\\\${/}
.endif
# If pkgsrc is supposed to ensure that tests are run before installation
# of the package, then the build targets should be "build test", otherwise
# just "build" suffices. _PKGSRC_BUILD_TARGETS is used in the "all",
# "install", and "uptodate-digest" targets.
#
.if !empty(PKGSRC_RUN_TEST:M[yY][eE][sS])
_PKGSRC_BUILD_TARGETS= build test
.else
_PKGSRC_BUILD_TARGETS= build
.endif
.PHONY: uptodate-digest
uptodate-digest:
.if !empty(USE_DIGEST:M[yY][eE][sS])
${_PKG_SILENT}${_PKG_DEBUG} \
if [ -f ${DISTINFO_FILE} -a \( ! -f ${DIGEST} -o ${DIGEST_VERSION} -lt ${DIGEST_REQD} \) ]; then \
{ cd ${PKGSRCDIR}/pkgtools/digest; \
${MAKE} clean; \
if [ -f ${DIGEST} ]; then \
${MAKE} ${MAKEFLAGS} deinstall; \
fi; \
${MAKE} ${MAKEFLAGS} ${_PKGSRC_BUILD_TARGETS}; \
if [ -f ${DIGEST} ]; then \
${MAKE} ${MAKEFLAGS} deinstall; \
fi; \
${MAKE} ${MAKEFLAGS} ${DEPENDS_TARGET}; \
${MAKE} ${MAKEFLAGS} clean; } \
fi
.else
@${DO_NADA}
.endif
.ifndef PKG_ARGS_COMMON
PKG_ARGS_COMMON= -v -c -${COMMENT:Q}" " -d ${DESCR} -f ${PLIST}
PKG_ARGS_COMMON+= -l -b ${BUILD_VERSION_FILE} -B ${BUILD_INFO_FILE}
PKG_ARGS_COMMON+= -s ${SIZE_PKG_FILE} -S ${SIZE_ALL_FILE}
PKG_ARGS_COMMON+= -P "`${MAKE} ${MAKEFLAGS} run-depends-list | ${SORT} -u`"
. if defined(CONFLICTS) && (${PKG_INSTALLATION_TYPE} == "overwrite")
PKG_ARGS_COMMON+= -C "${CONFLICTS}"
. endif
. ifdef INSTALL_FILE
PKG_ARGS_COMMON+= -i ${INSTALL_FILE}
. endif
. ifdef DEINSTALL_FILE
PKG_ARGS_COMMON+= -k ${DEINSTALL_FILE}
. endif
. ifdef MESSAGE
PKG_ARGS_COMMON+= -D ${MESSAGE}
. endif
. ifndef NO_MTREE
PKG_ARGS_COMMON+= -m ${MTREE_FILE}
. endif
. ifdef PKG_PRESERVE
PKG_ARGS_COMMON+= -n ${PRESERVE_FILE}
. endif
PKG_ARGS_INSTALL= -p ${PREFIX} ${PKG_ARGS_COMMON}
PKG_ARGS_BINPKG= -p ${PREFIX:S/^${DESTDIR}//} -L ${PREFIX} ${PKG_ARGS_COMMON}
.endif # !PKG_ARGS_COMMON
.if ${PKG_INSTALLATION_TYPE} == "pkgviews"
PKG_ARGS_INSTALL+= -U # don't update the pkgdb.byfile.db
PKG_ARGS_BINPKG+= -E # create an empty views file in the binpkg
.endif
# Define SMART_MESSAGES in /etc/mk.conf for messages giving the tree
# of dependencies for building, and the current target.
.ifdef SMART_MESSAGES
_PKGSRC_IN?= ===> ${.TARGET} [${PKGNAME}${_PKGSRC_DEPS}] ===
.else
_PKGSRC_IN?= ===
.endif
# Used to print all the '===>' style prompts - override this to turn them off.
ECHO_MSG?= ${ECHO}
# How to do nothing. Override if you, for some strange reason, would rather
# do something.
DO_NADA?= ${TRUE}
# If this host is behind a filtering firewall, use passive ftp(1)
.if defined(PASSIVE_FETCH)
FETCH_BEFORE_ARGS += -p
.endif
# Include popular master sites
.include "../../mk/bsd.sites.mk"
.if defined(DIST_SUBDIR)
_MASTER_SITE_BACKUP:= ${MASTER_SITE_BACKUP:=${DIST_SUBDIR}/}
. if defined(MASTER_SITE_OVERRIDE)
_MASTER_SITE_OVERRIDE:= ${MASTER_SITE_OVERRIDE:=${DIST_SUBDIR}/}
. endif # MASTER_SITE_OVERRIDE
.else # !DIST_SUBDIR
_MASTER_SITE_BACKUP:= ${MASTER_SITE_BACKUP}
. if defined(MASTER_SITE_OVERRIDE)
_MASTER_SITE_OVERRIDE:= ${MASTER_SITE_OVERRIDE}
. endif # MASTER_SITE_OVERRIDE
.endif # DIST_SUBDIR
# Where to put distfiles that don't have any other master site
MASTER_SITE_LOCAL?= \
${MASTER_SITE_BACKUP:=LOCAL_PORTS/} \
ALLFILES?= ${DISTFILES} ${PATCHFILES}
CKSUMFILES?= ${ALLFILES}
.for __tmp__ in ${IGNOREFILES}
CKSUMFILES:= ${CKSUMFILES:N${__tmp__}}
.endfor
# List of all files, with ${DIST_SUBDIR} in front. Used for fetch and checksum.
.if defined(DIST_SUBDIR)
. if ${CKSUMFILES} != ""
_CKSUMFILES?= ${CKSUMFILES:S/^/${DIST_SUBDIR}\//}
. endif
. if !empty(DISTFILES)
_DISTFILES?= ${DISTFILES:S/^/${DIST_SUBDIR}\//}
. else
_DISTFILES?= # empty
. endif
. if defined(IGNOREFILES) && !empty(IGNOREFILES)
_IGNOREFILES?= ${IGNOREFILES:S/^/${DIST_SUBDIR}\//}
. endif
. if defined(PATCHFILES) && !empty(PATCHFILES)
_PATCHFILES?= ${PATCHFILES:S/^/${DIST_SUBDIR}\//}
. else
_PATCHFILES?= # empty
. endif
.else
_CKSUMFILES?= ${CKSUMFILES}
_DISTFILES?= ${DISTFILES}
_IGNOREFILES?= ${IGNOREFILES}
_PATCHFILES?= ${PATCHFILES}
.endif
_ALLFILES?= ${_DISTFILES} ${_PATCHFILES}
.if defined(GNU_CONFIGURE)
#
# GNU_CONFIGURE_PREFIX is the argument to the --prefix option passed to the
# GNU configure script.
#
GNU_CONFIGURE_PREFIX?= ${PREFIX}
USE_GNU_CONFIGURE_HOST?= yes
. if !empty(USE_GNU_CONFIGURE_HOST:M[yY][eE][sS])
CONFIGURE_ARGS+= --host=${MACHINE_GNU_PLATFORM}
. endif
CONFIGURE_ARGS+= --prefix=${GNU_CONFIGURE_PREFIX}
HAS_CONFIGURE= yes
. if defined(USE_X11)
CONFIGURE_ARGS+= --x-includes=${X11BASE}/include
CONFIGURE_ARGS+= --x-libraries=${X11BASE}/lib${LIBABISUFFIX}
. endif
CONFIGURE_HAS_INFODIR?= yes
. if !empty(INFO_FILES) && !empty(CONFIGURE_HAS_INFODIR:M[yY][eE][sS])
CONFIGURE_ARGS+= --infodir=${PREFIX}/${INFO_DIR}
. endif
#
# By default, override config.guess and config.sub for GNU configure
# packages. pkgsrc's updated versions of these scripts allows GNU
# configure to recognise NetBSD ports such as shark.
#
CONFIG_GUESS_OVERRIDE?= \
config.guess */config.guess */*/config.guess
CONFIG_SUB_OVERRIDE?= \
config.sub */config.sub */*/config.sub
CONFIG_RPATH_OVERRIDE?= # set by platform file as needed
#
# By default, override config.status for GNU configure packages. We
# never want it to execute after the configure phase has ended as it
# might overwrite any post-configure changes we might have made to the
# generated files.
#
CONFIG_STATUS_OVERRIDE?= \
config.status */config.status */*/config.status
.endif
#
# Config file related settings - see Packages.txt
#
PKG_SYSCONFVAR?= ${PKGBASE}
PKG_SYSCONFSUBDIR?= # empty
.if ${PKG_INSTALLATION_TYPE} == "overwrite"
PKG_SYSCONFDEPOTBASE= # empty
PKG_SYSCONFBASEDIR= ${PKG_SYSCONFBASE}
.else
. if !empty(PKG_SYSCONFBASE:M${PREFIX}) || \
!empty(PKG_SYSCONFBASE:M${PREFIX}/*)
PKG_SYSCONFDEPOTBASE= # empty
PKG_SYSCONFBASEDIR= ${PKG_SYSCONFBASE}
. if !empty(CONF_DEPENDS)
_PLIST_IGNORE_FILES+= ${PKG_SYSCONFDIR:S,^${PREFIX}/,,}
. endif
. else
PKG_SYSCONFDEPOTBASE= ${PKG_SYSCONFBASE}/${DEPOT_SUBDIR}
PKG_SYSCONFBASEDIR= ${PKG_SYSCONFDEPOTBASE}/${PKGNAME}
. endif
.endif
.if empty(PKG_SYSCONFSUBDIR)
DFLT_PKG_SYSCONFDIR:= ${PKG_SYSCONFBASEDIR}
.else
DFLT_PKG_SYSCONFDIR:= ${PKG_SYSCONFBASEDIR}/${PKG_SYSCONFSUBDIR}
.endif
PKG_SYSCONFDIR= ${DFLT_PKG_SYSCONFDIR}
.if defined(PKG_SYSCONFDIR.${PKG_SYSCONFVAR})
PKG_SYSCONFDIR= ${PKG_SYSCONFDIR.${PKG_SYSCONFVAR}}
PKG_SYSCONFBASEDIR= ${PKG_SYSCONFDIR.${PKG_SYSCONFVAR}}
PKG_SYSCONFDEPOTBASE= # empty
.endif
ALL_ENV+= PKG_SYSCONFDIR=${PKG_SYSCONFDIR:Q}
BUILD_DEFS+= PKG_SYSCONFBASEDIR PKG_SYSCONFDIR
# If NO_BUILD is defined, default to not needing a compiler.
.if defined(NO_BUILD)
USE_LANGUAGES?= # empty
.endif
# Get the proper dependencies and set the PATH to use the compiler
# named in PKGSRC_COMPILER.
#
.include "../../mk/compiler.mk"
USE_NEW_TOOLS?= no
.if !empty(USE_NEW_TOOLS:M[yY][eE][sS])
.include "../../mk/tools/bsd.tools.mk"
.else
.include "../../mk/tools.mk"
.endif
.include "../../mk/wrapper/bsd.wrapper.mk"
.if defined(RECOMMENDED)
. if !empty(IGNORE_RECOMMENDED:M[nN][oO])
DEPENDS+= ${RECOMMENDED}
. else
BUILD_DEFS+= IGNORE_RECOMMENDED
. endif
.endif
# Remove some redundant dependencies from the DEPENDS list.
.include "../../mk/reduce-depends.mk"
DEPENDS:= ${REDUCED_DEPENDS}
# Find out the PREFIX of dependencies where the PREFIX is needed at build time.
.if defined(EVAL_PREFIX)
. for def in ${EVAL_PREFIX}
. if !defined(${def:C/=.*$//})
${def:C/=.*$//}_DEFAULT?=${LOCALBASE}
_${def:C/=.*$//}_CMD= ${PKG_INFO} -qp ${def:C/^.*=//} 2>/dev/null | ${AWK} '{ print $$2; exit }' | ${GREP} . || ${ECHO} ${${def:C/=.*$//}_DEFAULT}
${def:C/=.*$//}= ${_${def:C/=.*$//}_CMD:sh}
MAKEFLAGS+= ${def:C/=.*//}=${_${def:C/=.*$//}_CMD:sh}
. endif
. endfor
.endif
.if !defined(_PATH_ORIG)
_PATH_ORIG:= ${PATH}
MAKEFLAGS+= _PATH_ORIG=${_PATH_ORIG:Q}
.endif
.if !empty(PREPEND_PATH)
# This is very Special. Because PREPEND_PATH is set with += in reverse order,
# the awk expression reverses the order again (since bootstrap bmake doesn't
# yet support the :[-1..1] construct).
_PATH_CMD= ${ECHO} `${ECHO} ${PREPEND_PATH:Q} | ${AWK} '{ORS=":";for (i=NF;i>0;i--) print $$i}'`${_PATH_ORIG}
PATH= ${_PATH_CMD:sh} # DOES NOT use :=, to defer evaluation
.endif
# Add these bits to the environment use when invoking the sub-make
# processes for build-related phases.
#
BUILD_ENV+= PATH=${PATH:Q}
.MAIN: all
################################################################
# Many ways to disable a package.
#
# Ignore packages that can't be resold if building for a CDROM.
#
# Don't build a package if it's restricted and we don't want to
# get into that.
#
# Don't build any package that utilizes strong cryptography, for
# when the law of the land forbids it.
#
# Don't attempt to build packages against X if we don't have X.
#
# Don't build a package if it's broken.
################################################################
.if !defined(NO_SKIP)
. if (defined(NO_BIN_ON_CDROM) && defined(FOR_CDROM))
PKG_FAIL_REASON+= "${PKGNAME} may not be placed in binary form on a CDROM:" \
" "${NO_BIN_ON_CDROM:Q}
. endif
. if (defined(NO_SRC_ON_CDROM) && defined(FOR_CDROM))
PKG_FAIL_REASON+= "${PKGNAME} may not be placed in source form on a CDROM:" \
" "${NO_SRC_ON_CDROM:Q}
. endif
. if (defined(RESTRICTED) && defined(NO_RESTRICTED))
PKG_FAIL_REASON+= "${PKGNAME} is restricted:" \
" "${RESTRICTED:Q}
. endif
. if !(${MKCRYPTO} == "YES" || ${MKCRYPTO} == yes)
. if defined(CRYPTO)
PKG_FAIL_REASON+= "${PKGNAME} may not be built, because it utilizes strong cryptography"
. endif
. endif
. if defined(USE_X11) && !exists(${X11BASE})
. if ${X11_TYPE} == "native"
PKG_FAIL_REASON+= "${PKGNAME} uses X11, but ${X11BASE} not found"
. else
${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${X11BASE}
${_PKG_SILENT}${_PKG_DEBUG}${CHOWN} ${ROOT_USER}:${ROOT_GROUP} ${X11BASE}
${_PKG_SILENT}${_PKG_DEBUG}${CHMOD} ${PKGDIRMODE} ${X11BASE}
. endif
. endif
. if defined(BROKEN)
PKG_FAIL_REASON+= "${PKGNAME} is marked as broken:" ${BROKEN:Q}
. endif
. if defined(LICENSE)
. ifdef ACCEPTABLE_LICENSES
. for _lic in ${ACCEPTABLE_LICENSES}
. if ${LICENSE} == "${_lic}"
_ACCEPTABLE= yes
. endif # LICENSE == _lic
. endfor # _lic
. endif # ACCEPTABLE_LICENSES
. ifndef _ACCEPTABLE
PKG_FAIL_REASON+= "${PKGNAME} has an unacceptable license: ${LICENSE}." \
" To view the license, enter \"${MAKE} show-license\"." \
" To indicate acceptance, add this line to your /etc/mk.conf:" \
" ACCEPTABLE_LICENSES+=${LICENSE}"
. endif # _ACCEPTABLE
. endif # LICENSE
# Define __PLATFORM_OK only if the OS matches the pkg's allowed list.
. if defined(ONLY_FOR_PLATFORM) && !empty(ONLY_FOR_PLATFORM)
. for __tmp__ in ${ONLY_FOR_PLATFORM}
. if ${MACHINE_PLATFORM:M${__tmp__}} != ""
__PLATFORM_OK?= yes
. endif # MACHINE_PLATFORM
. endfor # __tmp__
. else # !ONLY_FOR_PLATFORM
__PLATFORM_OK?= yes
. endif # ONLY_FOR_PLATFORM
. for __tmp__ in ${NOT_FOR_PLATFORM}
. if ${MACHINE_PLATFORM:M${__tmp__}} != ""
. undef __PLATFORM_OK
. endif # MACHINE_PLATFORM
. endfor # __tmp__
. if !defined(__PLATFORM_OK)
PKG_SKIP_REASON+= "${PKGNAME} is not available for ${MACHINE_PLATFORM}"
. endif # !__PLATFORM_OK
#
# Now print some error messages that we know we should ignore the pkg
#
. if defined(PKG_FAIL_REASON) || defined(PKG_SKIP_REASON)
fetch checksum extract patch configure all build install package \
update install-depends:
. if defined(SKIP_SILENT)
@${DO_NADA}
. else
@for str in ${PKG_FAIL_REASON} ${PKG_SKIP_REASON}; do \
${ECHO} "${_PKGSRC_IN}> $$str"; \
done
. endif
. if defined(PKG_FAIL_REASON)
@${FALSE}
. endif
. endif # SKIP
.endif # !NO_SKIP
# Add these defs to the ones dumped into +BUILD_DEFS
BUILD_DEFS+= PKGPATH
BUILD_DEFS+= OPSYS OS_VERSION MACHINE_ARCH MACHINE_GNU_ARCH
BUILD_DEFS+= CPPFLAGS CFLAGS FFLAGS LDFLAGS
BUILD_DEFS+= CONFIGURE_ENV CONFIGURE_ARGS
BUILD_DEFS+= OBJECT_FMT LICENSE RESTRICTED
BUILD_DEFS+= NO_SRC_ON_FTP NO_SRC_ON_CDROM
BUILD_DEFS+= NO_BIN_ON_FTP NO_BIN_ON_CDROM
.if defined(OSVERSION_SPECIFIC)
BUILD_DEFS+= OSVERSION_SPECIFIC
.endif # OSVERSION_SPECIFIC
.PHONY: all
.if !target(all)
all: ${_PKGSRC_BUILD_TARGETS}
.endif
.if !defined(DEPENDS_TARGET)
. if make(package)
DEPENDS_TARGET= package
. elif make(update)
. if defined(UPDATE_TARGET) && ${UPDATE_TARGET} == "replace"
DEPENDS_TARGET= ${UPDATE_TARGET}
. else
DEPENDS_TARGET= update
. endif
. elif make(bin-install)
DEPENDS_TARGET= bin-install
. else
DEPENDS_TARGET= reinstall
. endif
.endif
.if !defined(UPDATE_TARGET)
. if ${DEPENDS_TARGET} == "update"
. if make(package)
UPDATE_TARGET= package
. else
UPDATE_TARGET= install
. endif
. else
UPDATE_TARGET= ${DEPENDS_TARGET}
. endif
.endif
UPDATE_RUNNING?= NO
################################################################
# The following are used to create easy dummy targets for
# disabling some bit of default target behavior you don't want.
# They still check to see if the target exists, and if so don't
# do anything, since you might want to set this globally for a
# group of packages in a Makefile.inc, but still be able to
# override from an individual Makefile.
################################################################
# Disable checksum
.PHONY: checksum
.if (defined(NO_CHECKSUM) || exists(${EXTRACT_COOKIE})) && !target(checksum)
checksum: fetch
@${DO_NADA}
.endif
# Disable wrapper
.PHONY: wrapper
.if defined(NO_BUILD) && !target(wrapper)
wrapper: tools
${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${WRAPPER_COOKIE}
.endif
# Disable configure
.PHONY: configure
.if defined(NO_CONFIGURE) && !target(configure)
configure: wrapper
${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${CONFIGURE_COOKIE}
.endif
# Disable build
.PHONY: build
.if defined(NO_BUILD) && !target(build)
build: configure
${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE}
.endif
# Disable install
.PHONY: install
.if defined(NO_INSTALL) && !target(install)
install: build
${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE}
.endif
# Disable package
.PHONY: package
.if defined(NO_PACKAGE) && !target(package)
package:
. if defined(SKIP_SILENT)
@${DO_NADA}
. else
@${ECHO_MSG} "${_PKGSRC_IN}> ${PKGNAME} may not be packaged: ${NO_PACKAGE}."
. endif
.endif
################################################################
# More standard targets start here.
#
# These are the body of the build/install framework. If you are
# not happy with the default actions, and you can't solve it by
# adding pre-* or post-* targets/scripts, override these.
################################################################
###
### _RESUME_TRANSFER:
###
### Macro to resume a previous transfer, needs to have defined
### the following options in mk.conf:
###
### PKG_RESUME_TRANSFERS
### FETCH_RESUME_ARGS (if FETCH_CMD != default)
### FETCH_OUTPUT_ARGS (if FETCH_CMD != default)
###
### For example if you want to use wget (pkgsrc/net/wget):
###
### FETCH_CMD=wget
### FETCH_RESUME_ARGS=-c
### FETCH_OUTPUT_ARGS=-O
###
### How does it work?
###
### FETCH_CMD downloads the file and saves it temporally into $$bfile.temp
### if the checksum match the correct one, $$bfile.temp is renamed to
### the original name.
###
_RESUME_TRANSFER= \
ofile="${DISTDIR}/${DIST_SUBDIR}/$$bfile"; \
tfile="${DISTDIR}/${DIST_SUBDIR}/$$bfile.temp"; \
tsize=`${AWK} '/^Size/ && $$2 == '"\"($$file)\""' { print $$4 }' ${DISTINFO_FILE}` || ${TRUE}; \
osize=`${WC} -c < $$ofile`; \
\
case "$$tsize" in \
"") ${ECHO_MSG} "No size in distinfo file (${DISTINFO_FILE})"; \
break;; \
esac; \
\
if [ "$$osize" -eq "$$tsize" ]; then \
if [ -f "$$tfile" ]; then \
${RM} $$tfile; \
fi; \
need_fetch=no; \
break; \
elif [ "$$osize" -lt "$$tsize" -a ! -f "$$tfile" ]; then \
${CP} $$ofile $$tfile; \
dsize=`${WC} -c < $$tfile`; \
need_fetch=yes; \
elif [ -f "$$tfile" -a "$$dsize" -gt "$$ossize" ]; then \
dsize=`${WC} -c < $$tfile`; \
need_fetch=yes; \
else \
dsize=`${WC} -c < $$tfile`; \
need_fetch=yes; \
fi; \
if [ "$$need_fetch" = "no" ]; then \
break; \
elif [ -f "$$tfile" -a "$$dsize" -eq "$$tsize" ]; then \
${MV} $$tfile $$ofile; \
break; \
elif [ -n "$$ftp_proxy" -o -n "$$http_proxy" ]; then \
${ECHO_MSG} "===> Resume is not supported by ftp(1) using http/ftp proxies."; \
break; \
elif [ "$$need_fetch" = "yes" -a "$$dsize" -lt "$$tsize" ]; then \
if [ "${FETCH_CMD:T}" != "ftp" -a -z "${FETCH_RESUME_ARGS}" ]; then \
${ECHO_MSG} "=> Resume transfers are not supported, FETCH_RESUME_ARGS is empty."; \
break; \
else \
for res_site in $$sites; do \
if [ -z "${FETCH_OUTPUT_ARGS}" ]; then \
${ECHO_MSG} "=> FETCH_OUTPUT_ARGS has to be defined."; \
break; \
fi; \
${ECHO_MSG} "=> $$bfile not completed, resuming:"; \
${ECHO_MSG} "=> Downloaded: $$dsize Total: $$tsize."; \
${ECHO_MSG}; \
cd ${DISTDIR}; \
${FETCH_CMD} ${FETCH_BEFORE_ARGS} ${FETCH_RESUME_ARGS} \
${FETCH_OUTPUT_ARGS} $${bfile}.temp $${res_site}$${bfile}; \
if [ $$? -eq 0 ]; then \
ndsize=`${WC} -c < $$tfile`; \
if [ "$$tsize" -eq "$$ndsize" ]; then \
${MV} $$tfile $$ofile; \
fi; \
break; \
fi; \
done; \
fi; \
elif [ "$$dsize" -gt "$$tsize" ]; then \
${ECHO_MSG} "==> Downloaded file larger than the recorded size."; \
break; \
fi
#
# Define the elementary fetch macros.
#
_FETCH_FILE= \
if [ ! -f $$file -a ! -f $$bfile -a ! -h $$bfile ]; then \
${ECHO_MSG} "=> $$bfile doesn't seem to exist on this system."; \
if [ ! -w ${_DISTDIR}/. ]; then \
${ECHO_MSG} "=> Can't download to ${_DISTDIR} (permission denied?)."; \
exit 1; \
fi; \
for site in $$sites; do \
${ECHO_MSG} "=> Attempting to fetch $$bfile from $${site}."; \
if [ -f ${DISTINFO_FILE} ]; then \
${AWK} 'NF == 5 && $$1 == "Size" && $$2 == "('$$bfile')" { printf("=> [%s %s]\n", $$4, $$5) }' ${DISTINFO_FILE}; \
fi; \
if ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${bfile} ${FETCH_AFTER_ARGS}; then \
if [ -n "${FAILOVER_FETCH}" -a -f ${DISTINFO_FILE} -a -f ${_DISTDIR}/$$bfile ]; then \
alg=`${AWK} 'NF == 4 && $$2 == "('$$file')" && $$3 == "=" {print $$1; exit}' ${DISTINFO_FILE}`; \
if [ -z "$$alg" ]; then \
alg=${PATCH_DIGEST_ALGORITHM};\
fi; \
CKSUM=`${DIGEST} $$alg < ${_DISTDIR}/$$bfile`; \
CKSUM2=`${AWK} '$$1 == "'$$alg'" && $$2 == "('$$file')" {print $$4;}' <${DISTINFO_FILE}`; \
if [ "$$CKSUM" = "$$CKSUM2" -o "$$CKSUM2" = "IGNORE" ]; then \
break; \
else \
${ECHO_MSG} "=> Checksum failure - trying next site."; \
fi; \
elif [ ! -f ${_DISTDIR}/$$bfile ]; then \
${ECHO_MSG} "=> FTP didn't fetch expected file, trying next site." ; \
else \
break; \
fi; \
fi \
done; \
if [ ! -f ${_DISTDIR}/$$bfile ]; then \
${ECHO_MSG} "=> Couldn't fetch $$bfile - please try to retrieve this";\
${ECHO_MSG} "=> file manually into ${_DISTDIR} and try again."; \
exit 1; \
fi; \
fi
_CHECK_DIST_PATH= \
if [ "X${DIST_PATH}" != "X" ]; then \
for d in "" ${DIST_PATH:S/:/ /g}; do \
if [ "X$$d" = "X" -o "X$$d" = "X${DISTDIR}" ]; then continue; fi; \
if [ -f $$d/${DIST_SUBDIR}/$$bfile ]; then \
${ECHO} "Using $$d/${DIST_SUBDIR}/$$bfile"; \
${RM} -f $$bfile; \
${LN} -s $$d/${DIST_SUBDIR}/$$bfile $$bfile; \
break; \
fi; \
done; \
fi
#
# Set up ORDERED_SITES to work out the exact list of sites for every file,
# using the dynamic sites script, or sorting according to the master site
# list or the patterns in MASTER_SORT or MASTER_SORT_REGEX as appropriate.
# No actual sorting is done until ORDERED_SITES is expanded.
#
.if defined(MASTER_SORT) || defined(MASTER_SORT_REGEX)
MASTER_SORT?=
MASTER_SORT_REGEX?=
MASTER_SORT_REGEX+= ${MASTER_SORT:S/./\\./g:C/.*/:\/\/[^\/]*&\//}
MASTER_SORT_AWK= BEGIN { RS = " "; ORS = " "; IGNORECASE = 1 ; gl = "${MASTER_SORT_REGEX:S/\\/\\\\/g}"; }
. for srt in ${MASTER_SORT_REGEX}
MASTER_SORT_AWK+= /${srt:C/\//\\\//g}/ { good["${srt:S/\\/\\\\/g}"] = good["${srt:S/\\/\\\\/g}"] " " $$0 ; next; }
. endfor
MASTER_SORT_AWK+= { rest = rest " " $$0; } END { n=split(gl, gla); for(i=1;i<=n;i++) { print good[gla[i]]; } print rest; }
SORT_SITES_CMD= ${ECHO} $$unsorted_sites | ${AWK} '${MASTER_SORT_AWK}'
ORDERED_SITES= ${_MASTER_SITE_OVERRIDE} `${SORT_SITES_CMD:S/\\/\\\\/g:C/"/\"/g}`
.else
ORDERED_SITES= ${_MASTER_SITE_OVERRIDE} $$unsorted_sites
.endif
#
# Associate each file to fetch with the correct site(s).
#
.if defined(DYNAMIC_MASTER_SITES)
. for fetchfile in ${_ALLFILES}
SITES_${fetchfile:T:S/=/--/}?= `${SH} ${FILESDIR}/getsite.sh ${fetchfile:T}`
. endfor
.endif
.if !empty(_DISTFILES)
. for fetchfile in ${_DISTFILES}
SITES_${fetchfile:T:S/=/--/}?= ${MASTER_SITES}
. endfor
.endif
.if !empty(_PATCHFILES)
. for fetchfile in ${_PATCHFILES}
SITES_${fetchfile:T:S/=/--/}?= ${PATCH_SITES}
. endfor
.endif
# This code is only called in a batch case, to check for the presence of
# the distfiles
.PHONY: batch-check-distfiles
batch-check-distfiles:
${_PKG_SILENT}${_PKG_DEBUG} \
gotfiles=yes; \
for file in "" ${_ALLFILES}; do \
case "$$file" in \
"") continue ;; \
*) if [ ! -f ${DISTDIR}/$$file ]; then \
gotfiles=no; \
fi ;; \
esac; \
done; \
case "$$gotfiles" in \
no) ${ECHO} "*** This package requires user intervention to download the distfiles"; \
${ECHO} "*** Please fetch the distfiles manually and place them in"; \
${ECHO} "*** ${DISTDIR}"; \
[ ! -z "${MASTER_SITES}" ] && \
${ECHO} "*** The distfiles are available from ${MASTER_SITES}"; \
[ ! -z "${HOMEPAGE}" ] && \
${ECHO} "*** See ${HOMEPAGE} for more details"; \
${ECHO}; \
${TOUCH} ${INTERACTIVE_COOKIE}; \
${FALSE} ;; \
esac
# check for any vulnerabilities in the package
# Please do not modify the leading "@" here
.PHONY: check-vulnerable
check-vulnerable:
@if [ ! -z "${PKG_SYSCONFDIR.audit-packages}" -a -f ${PKG_SYSCONFDIR.audit-packages}/audit-packages.conf ]; then \
. ${PKG_SYSCONFDIR.audit-packages}/audit-packages.conf; \
elif [ ! -z "${PKG_SYSCONFDIR}" -a -f ${PKG_SYSCONFDIR}/audit-packages.conf ]; then \
. ${PKG_SYSCONFDIR}/audit-packages.conf; \
fi; \
if [ -f ${PKGVULNDIR}/pkg-vulnerabilities ]; then \
${SETENV} PKGNAME="${PKGNAME}" \
PKGBASE="${PKGBASE}" \
${AWK} '/^$$/ { next } \
/^#.*/ { next } \
$$1 !~ ENVIRON["PKGBASE"] && $$1 !~ /\{/ { next } \
{ s = sprintf("${PKG_ADMIN} pmatch \"%s\" %s && ${ECHO} \"*** WARNING - %s vulnerability in %s - see %s for more information ***\"", $$1, ENVIRON["PKGNAME"], $$2, ENVIRON["PKGNAME"], $$3); system(s); }' < ${PKGVULNDIR}/pkg-vulnerabilities || ${FALSE}; \
fi
.PHONY: do-fetch
.if !target(do-fetch)
do-fetch:
. if !defined(ALLOW_VULNERABLE_PACKAGES)
${_PKG_SILENT}${_PKG_DEBUG} \
if [ -f ${PKGVULNDIR}/pkg-vulnerabilities ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> Checking for vulnerabilities in ${PKGNAME}"; \
vul=`${MAKE} ${MAKEFLAGS} check-vulnerable`; \
case "$$vul" in \
"") ;; \
*) ${ECHO} "$$vul"; \
${ECHO} "or define ALLOW_VULNERABLE_PACKAGES if this package is absolutely essential"; \
${FALSE} ;; \
esac; \
else \
${ECHO_MSG} "${_PKGSRC_IN}> *** No ${PKGVULNDIR}/pkg-vulnerabilities file found,"; \
${ECHO_MSG} "${_PKGSRC_IN}> *** skipping vulnerability checks. To fix, install"; \
${ECHO_MSG} "${_PKGSRC_IN}> *** the pkgsrc/security/audit-packages package and run"; \
${ECHO_MSG} "${_PKGSRC_IN}> *** '${LOCALBASE}/sbin/download-vulnerability-list'."; \
fi
. endif
. if !empty(_ALLFILES)
${_PKG_SILENT}${_PKG_DEBUG} \
${TEST} -d ${_DISTDIR} || ${MKDIR} ${_DISTDIR}
. if ${INTERACTIVE_STAGE:Mfetch} == "fetch" && defined(BATCH)
${_PKG_SILENT}${_PKG_DEBUG} \
${MAKE} ${MAKEFLAGS} batch-check-distfiles
. else
. for fetchfile in ${_ALLFILES}
. if defined(_FETCH_MESSAGE)
${_PKG_SILENT}${_PKG_DEBUG} \
file="${fetchfile}"; \
if [ ! -f ${DISTDIR}/$$file ]; then \
${_FETCH_MESSAGE}; \
fi
. else
${_PKG_SILENT}${_PKG_DEBUG} \
cd ${_DISTDIR}; \
file="${fetchfile}"; \
bfile="${fetchfile:T}"; \
unsorted_sites="${SITES_${fetchfile:T:S/=/--/}} ${_MASTER_SITE_BACKUP}"; \
sites="${ORDERED_SITES}"; \
${_CHECK_DIST_PATH}; \
if ${TEST} "${PKG_RESUME_TRANSFERS:M[Yy][Ee][Ss]}" ; then \
${_FETCH_FILE}; ${_RESUME_TRANSFER}; \
else \
${_FETCH_FILE}; \
fi
. endif # defined(_FETCH_MESSAGE)
. endfor
. endif # INTERACTIVE_STAGE == fetch
. endif # !empty(_ALLFILES)
.endif
# show both build and run depends directories (non-recursively)
.PHONY: show-depends-dirs
.if !target(show-depends-dirs)
show-depends-dirs:
@dlist=""; \
thisdir=`${PWD_CMD}`; \
for reldir in "" ${DEPENDS:C/^[^:]*://:C/:.*$//} ${BUILD_DEPENDS:C/^[^:]*://:C/:.*$//} ;\
do \
if [ "X$$reldir" = "X" ]; then continue; fi; \
cd $$thisdir/$$reldir; \
WD=`${PWD_CMD}`; \
d=`dirname $$WD`; \
absdir=`basename $$d`/`basename $$WD`; \
dlist="$$dlist $$absdir"; \
done; \
cd $$thisdir; \
${ECHO} "$$dlist"
.endif
# Show all build and run depends, reverse-breadth first, with options.
.if make(show-all-depends-dirs) || make(show-all-depends-dirs-excl) || make (show-root-dirs)
# "awk" macro to recurse over the dependencies efficiently, never running in
# the same same directory twice. You may set the following options via "-v":
#
# NonSelf = 1 to not print own directory;
# RootsOnly = 1 to print only root directories (i.e. directories
# of packages with no dependencies), including possibly
# own directory
#
_RECURSE_DEPENDS_DIRS= \
function append_dirs(dir) { \
command = "cd ../../" dir " && ${MAKE} show-depends-dirs"; \
command | getline tmp_dirs; \
close(command); \
if (tmp_dirs ~ /^$$/) \
root_dirs[p++] = dir; \
for (i = 1; i <= split(tmp_dirs, tmp_r); i++) \
if (!(tmp_r[i] in hash_all_dirs)) { \
all_dirs[n++] = tmp_r[i]; \
hash_all_dirs[tmp_r[i]] = 1 \
} \
} \
BEGIN { \
command = "${PWD_CMD}"; \
command | getline start_dir; \
close(command); \
i = split(start_dir, tmp_r, /\//); \
all_dirs[n++] = tmp_r[i-1] "/" tmp_r[i]; \
for (; m < n; ) \
append_dirs(all_dirs[m++]); \
if (RootsOnly) { \
printf("%s", root_dirs[--p]); \
for (; p > 0; ) \
printf(" %s", root_dirs[--p]) \
} \
else { \
if (m > NonSelf) \
printf("%s", all_dirs[--m]); \
for (; m > NonSelf; ) \
printf(" %s", all_dirs[--m]) \
} \
print \
}
.PHONY: show-all-depends-dirs
.if make(show-all-depends-dirs)
show-all-depends-dirs:
@${AWK} '${_RECURSE_DEPENDS_DIRS}'
.endif
.PHONY: show-all-depends-dirs-excl
.if make(show-all-depends-dirs-excl)
show-all-depends-dirs-excl:
@${AWK} -v NonSelf=1 '${_RECURSE_DEPENDS_DIRS}'
.endif
.PHONY: show-root-dirs
.if make(show-root-dirs)
show-root-dirs:
${_PKG_SILENT}${_PKG_DEBUG}${AWK} -v RootsOnly=1 '${_RECURSE_DEPENDS_DIRS}'
.endif
.endif # make(show-{all-depends-dirs{,-excl},root-dirs})
.PHONY: show-distfiles
.if !target(show-distfiles)
show-distfiles:
. if defined(PKG_FAIL_REASON)
${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA}
. else
${_PKG_SILENT}${_PKG_DEBUG} \
for file in "" ${_CKSUMFILES}; do \
if [ "X$$file" = "X" ]; then continue; fi; \
${ECHO} $$file; \
done
. endif
.endif
.PHONY: show-downlevel
.if !target(show-downlevel)
show-downlevel:
. if defined(PKG_FAIL_REASON)
${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA}
. else
${_PKG_SILENT}${_PKG_DEBUG} \
found="`${PKG_BEST_EXISTS} \"${PKGWILDCARD}\" || ${TRUE}`"; \
if [ "X$$found" != "X" -a "X$$found" != "X${PKGNAME}" ]; then \
${ECHO} "${PKGBASE} package: $$found installed, pkgsrc version ${PKGNAME}"; \
if [ "X$$STOP_DOWNLEVEL_AFTER_FIRST" != "X" ]; then \
${ECHO} "stopping after first downlevel pkg found"; \
exit 1; \
fi; \
fi
. endif
.endif
.PHONY: show-installed-depends
.if !target(show-installed-depends)
show-installed-depends:
. if !empty(DEPENDS)
${_PKG_SILENT}${_PKG_DEBUG} \
for i in ${DEPENDS:C/:.*$//:Q:S/\ / /g} ; do \
echo "$$i =>" `${PKG_BEST_EXISTS} "$$i"` ; \
done
. endif
.endif
.PHONY: show-needs-update
.if !target(show-needs-update)
show-needs-update:
. if !empty(DEPENDS)
${_PKG_SILENT}${_PKG_DEBUG} \
for i in `${MAKE} show-all-depends-dirs`; do \
cd ${PKGSRCDIR}/$$i; \
want=`${MAKE} show-var VARNAME=PKGNAME`; \
wild=`${MAKE} show-var VARNAME=PKGWILDCARD`; \
have=`${PKG_BEST_EXISTS} "$$wild" || ${TRUE}`; \
if [ -z "$$have" ]; then \
${ECHO} "$$i => (none) => needs install of $$want"; \
elif [ "$$have" != "$$want" ]; then \
${ECHO} "$$i => $$have => needs update to $$want"; \
fi; \
done
. endif
.endif
.PHONY: show-pkgsrc-dir
.if !target(show-pkgsrc-dir)
show-pkgsrc-dir:
. if defined(PKG_FAIL_REASON)
${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA}
. else
${_PKG_SILENT}${_PKG_DEBUG} \
found="`${PKG_BEST_EXISTS} \"${PKGWILDCARD}\" || ${TRUE}`"; \
if [ "X$$found" != "X" ]; then \
${ECHO} ${PKGPATH}; \
fi
. endif
.endif
# Extract
# pkgsrc coarse-grained locking definitions and targets
.if ${PKGSRC_LOCKTYPE} == "none"
_ACQUIRE_LOCK= ${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA}
_RELEASE_LOCK= ${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA}
.else
LOCKFILE= ${WRKDIR}/.lockfile
_ACQUIRE_LOCK= \
${_PKG_SILENT}${_PKG_DEBUG} \
ppid=`${PS} -p $$$$ -o ppid | ${AWK} 'NR == 2 { print $$1 }'`; \
if ${TEST} "$$ppid" = ""; then \
${ECHO} "No parent process ID found."; \
${FALSE}; \
fi; \
while true; do \
: "Remove lock files older than the last reboot"; \
if ${TEST} -f /var/run/dmesg.boot -a -f ${LOCKFILE}; then \
rebooted=`${FIND} /var/run/dmesg.boot -newer ${LOCKFILE} -print`; \
if ${TEST} x"$$rebooted" != x; then \
${ECHO} "=> Removing stale ${LOCKFILE}"; \
${RM} ${LOCKFILE}; \
fi; \
fi; \
${SHLOCK} -f ${LOCKFILE} -p $$ppid && break; \
${ECHO} "=> Lock is held by pid `cat ${LOCKFILE}`"; \
case "${PKGSRC_LOCKTYPE}" in \
once) exit 1 ;; \
sleep) sleep ${PKGSRC_SLEEPSECS} ;; \
esac \
done; \
if [ "${PKG_VERBOSE}" != "" ]; then \
${ECHO_MSG} "=> Lock acquired on behalf of process $$ppid"; \
fi
_RELEASE_LOCK= \
${_PKG_SILENT}${_PKG_DEBUG} \
if [ "${PKG_VERBOSE}" != "" ]; then \
${ECHO_MSG} "=> Lock released on behalf of process `${CAT} ${LOCKFILE}`"; \
fi; \
${RM} ${LOCKFILE}
.endif # PKGSRC_LOCKTYPE
${WRKDIR}:
.if !defined(KEEP_WRKDIR)
. if ${PKGSRC_LOCKTYPE} == "sleep" || ${PKGSRC_LOCKTYPE} == "once"
. if !exists(${LOCKFILE})
${_PKG_SILENT}${_PKG_DEBUG}${RM} -rf ${WRKDIR}
. endif
. endif
.endif
${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${WRKDIR}
${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${PKG_DB_TMPDIR}
.ifdef WRKOBJDIR
. if ${PKGSRC_LOCKTYPE} == "sleep" || ${PKGSRC_LOCKTYPE} == "once"
. if !exists(${LOCKFILE})
${_PKG_SILENT}${_PKG_DEBUG} \
${RM} -f ${WRKDIR_BASENAME} || ${TRUE}
. endif
. endif
${_PKG_SILENT}${_PKG_DEBUG} \
if ${LN} -s ${WRKDIR} ${WRKDIR_BASENAME} 2>/dev/null; then \
${ECHO} "${WRKDIR_BASENAME} -> ${WRKDIR}"; \
fi
.endif # WRKOBJDIR
_EXTRACT_SUFFIXES= .tar.gz .tgz .tar.bz2 .tbz .tar.Z .tar _tar.gz
_EXTRACT_SUFFIXES+= .shar.gz .shar.bz2 .shar.Z .shar
_EXTRACT_SUFFIXES+= .zip
_EXTRACT_SUFFIXES+= .lha .lzh
_EXTRACT_SUFFIXES+= .Z .bz2 .gz
_EXTRACT_SUFFIXES+= .zoo
_EXTRACT_SUFFIXES+= .bin
_EXTRACT_SUFFIXES+= .rar
# If the distfile has a tar.bz2 suffix, use bzcat in preference to gzcat,
# pulling in the "bzip2" package if necessary. [Note: this is only for
# the benefit of pre-1.5 NetBSD systems. "gzcat" on newer systems happily
# decodes bzip2.] Do likewise for ".zip" and ".lha" distfiles.
#
.if !empty(EXTRACT_ONLY:M*.bz2) || !empty(EXTRACT_ONLY:M*.tbz) || \
!empty(EXTRACT_SUFX:M*.bz2) || !empty(EXTRACT_SUFX:M*.tbz)
. if exists(/usr/bin/bzcat)
BZCAT= /usr/bin/bzcat <
. else
BUILD_DEPENDS+= bzip2>=0.9.0b:../../archivers/bzip2
BZCAT= ${LOCALBASE}/bin/bzcat
. endif
.endif
.if !empty(EXTRACT_ONLY:M*.zip) || !empty(EXTRACT_SUFX:M*.zip)
BUILD_DEPENDS+= unzip-[0-9]*:../../archivers/unzip
.endif
.if !empty(EXTRACT_ONLY:M*.lzh) || !empty(EXTRACT_ONLY:M*.lha) || \
!empty(EXTRACT_SUFX:M*.lzh) || !empty(EXTRACT_SUFX:M*.lha)
BUILD_DEPENDS+= lha>=114.9:../../archivers/lha
.endif
.if !defined(GZCAT)
. if !empty(EXTRACT_ONLY:M*.gz) || !empty(EXTRACT_ONLY:M*.tgz) || \
!empty(EXTRACT_SUFX:M*.gz) || !empty(EXTRACT_SUFX:M*.tgz)
BUILD_DEPENDS+= gzip-base>=1.2.4b:../../archivers/gzip-base
GZCAT= ${LOCALBASE}/bin/zcat
. endif
.endif
.if !empty(EXTRACT_ONLY:M*.zoo) || !empty(EXTRACT_SUFX:M*.zoo)
BUILD_DEPENDS+= unzoo-[0-9]*:../../archivers/unzoo
.endif
.if !empty(EXTRACT_ONLY:M*.rar) || !empty(EXTRACT_SUFX:M*.rar)
BUILD_DEPENDS+= unrar>=3.3.4:../../archivers/unrar
.endif
DECOMPRESS_CMD.tar.gz?= ${GZCAT}
DECOMPRESS_CMD.tgz?= ${DECOMPRESS_CMD.tar.gz}
DECOMPRESS_CMD.tar.bz2?= ${BZCAT}
DECOMPRESS_CMD.tbz?= ${DECOMPRESS_CMD.tar.bz2}
DECOMPRESS_CMD.tar.Z?= ${GZCAT}
DECOMPRESS_CMD.tar?= ${CAT}
DECOMPRESS_CMD.shar.gz?= ${GZCAT}
DECOMPRESS_CMD.shar.bz2?= ${BZCAT}
DECOMPRESS_CMD.shar.Z?= ${GZCAT}
DECOMPRESS_CMD.shar?= ${CAT}
DECOMPRESS_CMD.Z?= ${GZCAT}
DECOMPRESS_CMD.bz2?= ${BZCAT}
DECOMPRESS_CMD.gz?= ${GZCAT}
DECOMPRESS_CMD?= ${GZCAT}
.for __suffix__ in ${_EXTRACT_SUFFIXES}
. if !defined(DECOMPRESS_CMD${__suffix__})
DECOMPRESS_CMD${__suffix__}?= ${DECOMPRESS_CMD}
. endif
.endfor
# If this is empty, then everything gets extracted.
EXTRACT_ELEMENTS?= # empty
DOWNLOADED_DISTFILE= $${extract_file}
EXTRACT_CMD.zip?= ${LOCALBASE}/bin/unzip ${EXTRACT_CMD_OPTS.zip} $${extract_file}
EXTRACT_CMD_OPTS.zip?= -Laqo
EXTRACT_CMD.lha?= ${LOCALBASE}/bin/lha ${EXTRACT_CMD_OPTS.lha} $${extract_file}
EXTRACT_CMD_OPTS.lha?= xq
EXTRACT_CMD.lzh?= ${EXTRACT_CMD.lha}
EXTRACT_CMD_OPTS.lzh?= ${EXTRACT_CMD_OPTS.lha}
EXTRACT_CMD.zoo?= ${LOCALBASE}/bin/unzoo ${EXTRACT_CMD_OPTS.zoo} $${extract_file}
EXTRACT_CMD_OPTS.zoo?= -x
EXTRACT_CMD.rar?= ${LOCALBASE}/bin/unrar ${EXTRACT_CMD_OPTS.rar} $${extract_file}
EXTRACT_CMD_OPTS.rar?= x -inul
EXTRACT_ENV.bin?= # empty
EXTRACT_CMD.bin?= ${ECHO} yes | ${SETENV} ${EXTRACT_ENV.bin} $${extract_file} ${EXTRACT_CMD_OPTS.bin} >/dev/null
.for __suffix__ in .gz .bz2 .Z
EXTRACT_CMD${__suffix__}?= ${DECOMPRESS_CMD${__suffix__}} $${extract_file} > `${BASENAME} $${extract_file} ${__suffix__}`
.endfor
.for __suffix__ in .shar.gz .shar.bz2 .shar.Z .shar
EXTRACT_CMD${__suffix__}?= ${DECOMPRESS_CMD${__suffix__}} $${extract_file} | ${SH}
.endfor
# If EXTRACT_USING_PAX is defined, use pax in preference to (GNU) tar.
#
.if defined(EXTRACT_USING_PAX)
_DFLT_EXTRACT_CMD?= ${DECOMPRESS_CMD} $${extract_file} | ${PAX} -O -r ${EXTRACT_ELEMENTS}
.else
_DFLT_EXTRACT_CMD?= ${DECOMPRESS_CMD} $${extract_file} | ${GTAR} -xf - ${EXTRACT_ELEMENTS}
.endif
.for __suffix__ in ${_EXTRACT_SUFFIXES}
. if !defined(EXTRACT_CMD${__suffix__})
. if defined(EXTRACT_USING_PAX)
EXTRACT_CMD${__suffix__}?= ${DECOMPRESS_CMD${__suffix__}} $${extract_file} | ${PAX} -O -r ${EXTRACT_ELEMENTS}
. else
EXTRACT_CMD${__suffix__}?= ${DECOMPRESS_CMD${__suffix__}} $${extract_file} | ${GTAR} -xf - ${EXTRACT_ELEMENTS}
. endif
. endif
.endfor
# _SHELL_EXTRACT is a "subroutine" for extracting an archive. It extracts
# the contents of archive named by the shell variable "extract_file" based
# on the file extension of the archive.
#
_SHELL_EXTRACT= case $${extract_file} in
.for __suffix__ in ${_EXTRACT_SUFFIXES}
_SHELL_EXTRACT+= *${__suffix__}) ${EXTRACT_CMD${__suffix__}} ;;
.endfor
_SHELL_EXTRACT+= *) ${_DFLT_EXTRACT_CMD} ;;
_SHELL_EXTRACT+= esac
EXTRACT_CMD?= ${_SHELL_EXTRACT}
.PHONY: do-extract
.if !target(do-extract)
do-extract: ${WRKDIR}
. for __file__ in ${EXTRACT_ONLY}
${_PKG_SILENT}${_PKG_DEBUG} \
extract_file="${_DISTDIR}/${__file__}"; export extract_file; \
cd ${WRKDIR}; ${EXTRACT_CMD}
. endfor
.endif
# Patch
# LOCALPATCHES contains the location of local patches to packages
# that are maintained in a directory tree reflecting the same
# hierarchy as the pkgsrc tree, i.e. local patches for www/apache
# would be found as ${LOCALPATCHES}/www/apache/*.
#
.if defined(LOCALPATCHES)
_DFLT_LOCALPATCHFILES= ${LOCALPATCHES}/${PKGPATH}/*
_LOCALPATCHFILES= ${_DFLT_LOCALPATCHFILES}
.endif
.PHONY: do-patch
.if !target(do-patch)
do-patch: uptodate-digest
. if defined(PATCHFILES)
@${ECHO_MSG} "${_PKGSRC_IN}> Applying distribution patches for ${PKGNAME}"
. for i in ${PATCHFILES}
${_PKG_SILENT}${_PKG_DEBUG}cd ${_DISTDIR}; \
if [ ${PATCH_DEBUG_TMP} = yes ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> Applying distribution patch ${i}"; \
fi; \
${PATCH_DIST_CAT.${i:S/=/--/}} | \
${PATCH} ${PATCH_DIST_ARGS.${i:S/=/--/}} \
|| { ${ECHO} "Patch ${i} failed"; ${PKGSRC_PATCH_FAIL}; }
. endfor
. endif
${_PKG_SILENT}${_PKG_DEBUG} \
patchlist=""; \
if [ -d ${PATCHDIR} ]; then \
if [ "`${ECHO} ${PATCHDIR}/patch-*`" = "${PATCHDIR}/patch-*" ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> Ignoring empty patch directory"; \
if [ -d ${PATCHDIR}/CVS ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> Perhaps you forgot the -P flag to 'cvs checkout' or 'cvs update'?"; \
fi; \
else \
patchlist=`${ECHO} ${PATCHDIR}/patch-*`; \
fi; \
fi; \
if [ "X${_LOCALPATCHFILES}" = "X${_DFLT_LOCALPATCHFILES}" ]; then \
localpatchfiles="`${ECHO} ${_LOCALPATCHFILES}`"; \
if [ "$${localpatchfiles}" != "${_LOCALPATCHFILES}" ]; then \
patchlist="$${patchlist} $${localpatchfiles}"; \
fi; \
else \
patchlist=`${ECHO} $${patchlist} ${_LOCALPATCHFILES}`; \
fi; \
if [ -n "$${patchlist}" ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> Applying pkgsrc patches for ${PKGNAME}" ; \
fail=""; \
for i in $${patchlist}; do \
if [ ! -f "$$i" ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> $$i is not a valid patch file - skipping"; \
continue; \
fi; \
case $$i in \
*.orig|*.rej|*~) \
${ECHO_MSG} "${_PKGSRC_IN}> Ignoring patchfile $$i"; \
continue; \
;; \
${PATCHDIR}/patch-local-*) \
;; \
${PATCHDIR}/patch-*) \
if [ -f ${DISTINFO_FILE} ]; then \
filename=`expr $$i : '.*/\(.*\)'`; \
algsum=`${AWK} 'NF == 4 && $$2 == "('$$filename')" && $$3 == "=" {print $$1 " " $$4}' ${DISTINFO_FILE} || ${TRUE}`; \
if [ "X$$algsum" != "X" ]; then \
alg=`${ECHO} $$algsum | ${AWK} '{ print $$1 }'`; \
recorded=`${ECHO} $$algsum | ${AWK} '{ print $$2 }'`; \
calcsum=`${SED} -e '/\$$NetBSD.*/d' $$i | ${DIGEST} $$alg`; \
if [ ${PATCH_DEBUG_TMP} = yes ]; then \
${ECHO_MSG} "=> Verifying $$filename (using digest algorithm $$alg)"; \
fi; \
fi; \
if [ "X$$algsum" = "X" -o "X$$recorded" = "X" ]; then \
${ECHO_MSG} "**************************************"; \
${ECHO_MSG} "Ignoring unknown patch file: $$i"; \
${ECHO_MSG} "**************************************"; \
continue; \
fi; \
if [ "X$$calcsum" != "X$$recorded" ]; then \
${ECHO_MSG} "**************************************"; \
${ECHO_MSG} "Patch file $$i has been modified"; \
${ECHO_MSG} "**************************************"; \
fail="$$fail $$filename"; \
continue; \
fi; \
else \
${ECHO_MSG} "**************************************"; \
${ECHO_MSG} "Ignoring unknown patch file: $$i"; \
${ECHO_MSG} "**************************************"; \
continue; \
fi; \
;; \
esac; \
if [ ${PATCH_DEBUG_TMP} = yes ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> Applying pkgsrc patch $$i" ; \
fi; \
fuzz=""; \
${PATCH} -v > /dev/null 2>&1 && fuzz="${PATCH_FUZZ_FACTOR}"; \
${PATCH} $$fuzz ${PATCH_ARGS} < $$i || \
{ ${ECHO} Patch $$i failed ; ${PKGSRC_PATCH_FAIL}; }; \
done; \
if [ "X$$fail" != "X" ]; then \
${ECHO_MSG} "Patching failed due to modified patch file(s): $$fail"; \
${PKGSRC_PATCH_FAIL}; \
fi; \
fi
.endif
# Configure
# _CONFIGURE_PREREQ is a list of targets to run after pre-configure but before
# do-configure. These targets typically edit the files used by the
# do-configure target. The targets are run as dependencies of
# pre-configure-override.
#
# _CONFIGURE_POSTREQ is a list of targets to run after do-configure but before
# post-configure. These targets typically edit the files generated by
# the do-configure target that are used during the build phase.
.if defined(USE_PKGLOCALEDIR)
_PKGLOCALEDIR= ${PREFIX}/${PKGLOCALEDIR}/locale
REPLACE_LOCALEDIR_PATTERNS?= # empty
_REPLACE_LOCALEDIR_PATTERNS= ${REPLACE_LOCALEDIR_PATTERNS}
. if defined(HAS_CONFIGURE) || defined(GNU_CONFIGURE)
_REPLACE_LOCALEDIR_PATTERNS+= [Mm]akefile.in*
. else
_REPLACE_LOCALEDIR_PATTERNS+= [Mm]akefile*
. endif
_REPLACE_LOCALEDIR_PATTERNS_FIND= \
\( ${_REPLACE_LOCALEDIR_PATTERNS:S/$/!/:S/^/-o -name !/:S/!/"/g:S/-o//1} \)
REPLACE_LOCALEDIR?= # empty
_REPLACE_LOCALEDIR= \
${REPLACE_LOCALEDIR} \
`${FIND} . ${_REPLACE_LOCALEDIR_PATTERNS_FIND} -print | ${SED} -e 's|^\./||' | ${GREP} -v '\.orig' | ${SORT} -u`
_CONFIGURE_PREREQ+= subst-pkglocaledir
. if empty(USE_PKGLOCALEDIR:M[nN][oO])
SUBST_CLASSES+= pkglocaledir
. endif
SUBST_MESSAGE.pkglocaledir= "Fixing locale directory references."
SUBST_FILES.pkglocaledir= ${_REPLACE_LOCALEDIR}
SUBST_SED.pkglocaledir= \
-e 's|^\(localedir[ :]*=\).*|\1 ${_PKGLOCALEDIR}|' \
-e 's|^\(gnulocaledir[ :]*=\).*|\1 ${_PKGLOCALEDIR}|' \
-e 's|\(-DLOCALEDIR[ ]*=\)[^ ]*\(\.\*\)|\1"\\"${_PKGLOCALEDIR}\\""\2|'
.endif
.if defined(REPLACE_PERL)
REPLACE_INTERPRETER+= perl
_REPLACE.perl.old= .*/bin/perl
_REPLACE.perl.new= ${PERL5}
_REPLACE_FILES.perl= ${REPLACE_PERL}
.endif
.if defined(REPLACE_INTERPRETER)
_CONFIGURE_PREREQ+= replace-interpreter
.PHONY: replace-interpreter
replace-interpreter:
. for lang in ${REPLACE_INTERPRETER}
. for pattern in ${_REPLACE_FILES.${lang}}
${_PKG_SILENT}${_PKG_DEBUG} \
cd ${WRKSRC}; \
for f in ${pattern}; do \
if [ -f $${f} ]; then \
${SED} -e '1s|^#!${_REPLACE.${lang}.old}|#!${_REPLACE.${lang}.new}|' \
$${f} > $${f}.new; \
if [ -x $${f} ]; then \
${CHMOD} a+x $${f}.new; \
fi; \
${MV} -f $${f}.new $${f}; \
fi; \
done
. endfor
. endfor
.endif
.if defined(USE_LIBTOOL) && defined(LTCONFIG_OVERRIDE)
_CONFIGURE_PREREQ+= do-ltconfig-override
.PHONY: do-ltconfig-override
do-ltconfig-override:
. for ltconfig in ${LTCONFIG_OVERRIDE}
${_PKG_SILENT}${_PKG_DEBUG} \
if [ -f ${ltconfig} ]; then \
${RM} -f ${ltconfig}; \
${ECHO} "${RM} -f libtool; ${LN} -s ${_LIBTOOL} libtool" \
> ${ltconfig}; \
${CHMOD} +x ${ltconfig}; \
fi
. endfor
.endif
_CONFIGURE_PREREQ+= do-config-star-override
.PHONY: do-config-star-override
do-config-star-override:
.if defined(GNU_CONFIGURE)
. if !empty(CONFIG_GUESS_OVERRIDE)
. for _pattern_ in ${CONFIG_GUESS_OVERRIDE}
${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC}; \
for file in ${_pattern_}; do \
if [ -f "$$file" ]; then \
${RM} -f $$file; \
${LN} -s ${PKGSRCDIR}/mk/gnu-config/config.guess \
$$file; \
fi; \
done
. endfor
. endif
. if !empty(CONFIG_SUB_OVERRIDE)
. for _pattern_ in ${CONFIG_SUB_OVERRIDE}
${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC}; \
for file in ${_pattern_}; do \
if [ -f "$$file" ]; then \
${RM} -f $$file; \
${LN} -s ${PKGSRCDIR}/mk/gnu-config/config.sub \
$$file; \
fi; \
done
. endfor
. endif
. if !empty(CONFIG_RPATH_OVERRIDE)
. for _pattern_ in ${CONFIG_RPATH_OVERRIDE}
${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC}; \
for file in ${_pattern_}; do \
if [ -f "$$file" ]; then \
${RM} -f $$file; \
${LN} -s ${PKGSRCDIR}/mk/gnu-config/config.rpath \
$$file; \
fi; \
done
. endfor
. endif
.endif
PKGCONFIG_OVERRIDE_SED= \
'/^Libs:.*[ ]/s|-L\([ ]*[^ ]*\)|${COMPILER_RPATH_FLAG}\1 -L\1|g'
PKGCONFIG_OVERRIDE_STAGE?= pre-configure
.if defined(PKGCONFIG_OVERRIDE) && !empty(PKGCONFIG_OVERRIDE)
. if ${PKGCONFIG_OVERRIDE_STAGE} == "pre-configure"
_CONFIGURE_PREREQ+= subst-pkgconfig
. elif ${PKGCONFIG_OVERRIDE_STAGE} == "post-configure"
_CONFIGURE_POSTREQ+= subst-pkgconfig
. else
SUBST_STAGE.pkgconfig= ${PKGCONFIG_OVERRIDE_STAGE}
. endif
SUBST_CLASSES+= pkgconfig
SUBST_MESSAGE.pkgconfig= "Adding rpaths to pkgconfig files."
SUBST_FILES.pkgconfig= ${PKGCONFIG_OVERRIDE:S/^${WRKSRC}\///}
SUBST_SED.pkgconfig= ${PKGCONFIG_OVERRIDE_SED}
.endif
# By adding this target, it makes sure the above PREREQ's work.
.PHONY: pre-configure-override
pre-configure-override: ${_CONFIGURE_PREREQ}
@${DO_NADA}
.PHONY: do-configure
.if !target(do-configure)
do-configure:
. if defined(HAS_CONFIGURE)
. for DIR in ${CONFIGURE_DIRS}
${_PKG_SILENT}${_PKG_DEBUG}${_ULIMIT_CMD}cd ${DIR} && ${SETENV} \
AWK="${AWK}" \
INSTALL="`${TYPE} ${INSTALL} | ${AWK} '{ print $$NF }'` -c -o ${BINOWN} -g ${BINGRP}" \
ac_given_INSTALL="`${TYPE} ${INSTALL} | ${AWK} '{ print $$NF }'` -c -o ${BINOWN} -g ${BINGRP}" \
INSTALL_DATA="${INSTALL_DATA}" \
INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
INSTALL_GAME="${INSTALL_GAME}" \
INSTALL_GAME_DATA="${INSTALL_GAME_DATA}" \
INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
${CONFIGURE_ENV} ${CONFIG_SHELL} \
${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}
. endfor
. endif
. if defined(USE_IMAKE)
. for DIR in ${CONFIGURE_DIRS}
${_PKG_SILENT}${_PKG_DEBUG}cd ${DIR} && ${SETENV} ${SCRIPTS_ENV} XPROJECTROOT=${X11BASE} ${XMKMF}
. endfor
. endif
.endif
.if defined(USE_LIBTOOL) && \
(defined(LIBTOOL_OVERRIDE) || defined(SHLIBTOOL_OVERRIDE))
_CONFIGURE_POSTREQ+= do-libtool-override
.PHONY: do-libtool-override
do-libtool-override:
. if defined(LIBTOOL_OVERRIDE)
. for _pattern_ in ${LIBTOOL_OVERRIDE}
${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC}; \
for file in ${_pattern_}; do \
if [ -f "$$file" ]; then \
${RM} -f $$file; \
(${ECHO} '#!${CONFIG_SHELL}'; \
${ECHO} 'exec ${_LIBTOOL} "$$@"'; \
) > $$file; \
${CHMOD} +x $$file; \
fi; \
done
. endfor
. endif
. if defined(SHLIBTOOL_OVERRIDE)
. for _pattern_ in ${SHLIBTOOL_OVERRIDE}
${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC}; \
for file in ${_pattern_}; do \
if [ -f "$$file" ]; then \
${RM} -f $$file; \
(${ECHO} '#!${CONFIG_SHELL}'; \
${ECHO} 'exec ${_SHLIBTOOL} "$$@"'; \
) > $$file; \
${CHMOD} +x $$file; \
fi; \
done
. endfor
. endif
.endif
.if defined(CONFIG_STATUS_OVERRIDE)
_CONFIGURE_POSTREQ+= do-config-status-override
.PHONY: do-config-status-override
do-config-status-override:
. for _pattern_ in ${CONFIG_STATUS_OVERRIDE}
${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC}; \
for file in ${_pattern_}; do \
if [ -f "$$file" ]; then \
${MV} -f $$file $$file.overridden; \
${AWK} '/ *-recheck *\| *--recheck.*\)/ { \
print; \
print " exit 0"; \
next; \
} \
{ print } \
' $$file.overridden > $$file; \
${CHMOD} +x $$file; \
fi; \
done
. endfor
.endif
.PHONY: post-configure
post-configure: ${_CONFIGURE_POSTREQ}
# Build
BUILD_DIRS?= ${WRKSRC}
BUILD_MAKE_FLAGS?= ${MAKE_FLAGS}
.PHONY: do-build
.if !target(do-build)
do-build:
. for DIR in ${BUILD_DIRS}
${_PKG_SILENT}${_PKG_DEBUG}${_ULIMIT_CMD}cd ${DIR} && ${SETENV} ${MAKE_ENV} ${MAKE_PROGRAM} ${BUILD_MAKE_FLAGS} -f ${MAKEFILE} ${BUILD_TARGET}
. endfor
.endif
#Test
TEST_DIRS?= ${BUILD_DIRS}
TEST_ENV+= ${MAKE_ENV}
TEST_MAKE_FLAGS?= ${MAKE_FLAGS}
.PHONY: do-test
.if !target(do-test)
do-test:
. if defined(TEST_TARGET) && !empty(TEST_TARGET)
. for DIR in ${TEST_DIRS}
${_PKG_SILENT}${_PKG_DEBUG}${_ULIMIT_CMD}cd ${DIR} && ${SETENV} ${TEST_ENV} ${MAKE_PROGRAM} ${TEST_MAKE_FLAGS} -f ${MAKEFILE} ${TEST_TARGET}
. endfor
. else
@${DO_NADA}
. endif
.endif
# Install
.PHONY: do-install
.if !target(do-install)
do-install:
. for DIR in ${INSTALL_DIRS}
${_PKG_SILENT}${_PKG_DEBUG}${_ULIMIT_CMD}cd ${DIR} && ${SETENV} ${MAKE_ENV} ${MAKE_PROGRAM} ${INSTALL_MAKE_FLAGS} -f ${MAKEFILE} ${INSTALL_TARGET}
. endfor
.endif
# Package
.PHONY: real-su-package
.if !target(real-su-package)
real-su-package: ${PLIST} ${DESCR}
${_PKG_SILENT}${_PKG_DEBUG} \
${ECHO_MSG} "${_PKGSRC_IN}> Building binary package for ${PKGNAME}"; \
if ${PKG_INFO} -qe ${PKGNAME}; then \
: The package is installed. ; \
else \
${ECHO_MSG} "=> ${PKGNAME} is not installed."; \
exit 1; \
fi; \
if [ ! -d ${PKGREPOSITORY} ]; then \
${MKDIR} ${PKGREPOSITORY}; \
if [ $$? -ne 0 ]; then \
${ECHO_MSG} "=> Can't create directory ${PKGREPOSITORY}."; \
exit 1; \
fi; \
fi; \
if ${PKG_CREATE} ${PKG_ARGS_BINPKG} ${PKGFILE}; then \
${MAKE} ${MAKEFLAGS} package-links; \
else \
${ECHO} "(pkg_create: exitcode $$?)"; \
${MAKE} ${MAKEFLAGS} delete-package; \
exit 1; \
fi
${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${PACKAGE_COOKIE}
. if defined(NO_BIN_ON_CDROM)
@${ECHO_MSG} "${_PKGSRC_IN}> Warning: ${PKGNAME} may not be put on a CD-ROM:"
@${ECHO_MSG} "${_PKGSRC_IN}> " ${NO_BIN_ON_CDROM:Q}
. endif
. if defined(NO_BIN_ON_FTP)
@${ECHO_MSG} "${_PKGSRC_IN}> Warning: ${PKGNAME} may not be made available through FTP:"
@${ECHO_MSG} "${_PKGSRC_IN}> " ${NO_BIN_ON_FTP:Q}
. endif
. if defined(RECOMMENDED) && !empty(IGNORE_RECOMMENDED:M[yY][eE][sS])
@${ECHO_MSG} "${_PKGSRC_IN}> Warning: dependency recommendations are being ignored!"
@${ECHO_MSG} "${_PKGSRC_IN}> ${PKGNAME} should not be uploaded nor"
@${ECHO_MSG} "${_PKGSRC_IN}> otherwise be used as a binary package!"
. endif
.endif
# Some support rules for real-su-package
.PHONY: package-links
.if !target(package-links)
package-links:
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} delete-package-links
${_PKG_SILENT}${_PKG_DEBUG}for cat in ${CATEGORIES}; do \
if [ ! -d ${PACKAGES}/$$cat ]; then \
${MKDIR} ${PACKAGES}/$$cat; \
if [ $$? -ne 0 ]; then \
${ECHO_MSG} "=> Can't create directory ${PACKAGES}/$$cat."; \
exit 1; \
fi; \
fi; \
${RM} -f ${PACKAGES}/$$cat/${PKGNAME}${PKG_SUFX}; \
${LN} -s ../${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PACKAGES}/$$cat; \
done;
.endif
.PHONY: delete-package-links
.if !target(delete-package-links)
delete-package-links:
${_PKG_SILENT}${_PKG_DEBUG}\
${FIND} ${PACKAGES} -type l -name ${PKGNAME}${PKG_SUFX} -print | ${XARGS} ${RM} -f
.endif
.PHONY: delete-package
.if !target(delete-package)
delete-package:
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} delete-package-links
${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${PKGFILE}
.endif
.PHONY: real-su-install
real-su-install: ${MESSAGE}
.if !defined(NO_PKG_REGISTER) && !defined(FORCE_PKG_REGISTER) && \
(${PKG_INSTALLATION_TYPE} == "overwrite")
. if defined(CONFLICTS)
${_PKG_SILENT}${_PKG_DEBUG} \
${RM} -f ${WRKDIR}/.CONFLICTS
. for conflict in ${CONFLICTS}
${_PKG_SILENT}${_PKG_DEBUG} \
found="`${PKG_BEST_EXISTS} \"${conflict}\" || ${TRUE}`"; \
if [ X"$$found" != X"" ]; then \
${ECHO} "$$found" >> ${WRKDIR}/.CONFLICTS; \
fi
. endfor
${_PKG_SILENT}${_PKG_DEBUG} \
if [ -s ${WRKDIR}/.CONFLICTS ]; then \
found=`${SED} -e s'|${_PKG_DBDIR}/||g' ${WRKDIR}/.CONFLICTS | tr '\012' ' '`; \
${ECHO_MSG} "${_PKGSRC_IN}> ${PKGNAME} conflicts with installed package(s): $$found found."; \
${ECHO_MSG} "*** They install the same files into the same place."; \
${ECHO_MSG} "*** Please remove $$found first with pkg_delete(1)."; \
${RM} -f ${WRKDIR}/.CONFLICTS; \
exit 1; \
fi
. endif # CONFLICTS
${_PKG_SILENT}${_PKG_DEBUG} \
found="`${PKG_BEST_EXISTS} \"${PKGWILDCARD}\" || ${TRUE}`"; \
if [ "$$found" != "" ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> $$found is already installed - perhaps an older version?"; \
${ECHO_MSG} "*** If so, you may use either of:"; \
${ECHO_MSG} "*** - \"pkg_delete $$found\" and \"${MAKE} reinstall\" to upgrade properly"; \
${ECHO_MSG} "*** - \"${MAKE} update\" to rebuild the package and all of its dependencies"; \
${ECHO_MSG} "*** - \"${MAKE} replace\" to replace only the package without re-linking"; \
${ECHO_MSG} "*** dependencies, risking various problems."; \
exit 1; \
fi
.endif # !NO_PKG_REGISTER && !NO_FORCE_REGISTER && overwrite
.if ${PKG_INSTALLATION_TYPE} == "pkgviews"
${_PKG_SILENT}${_PKG_DEBUG} \
found="`${PKG_INFO} -e ${PKGNAME} || ${TRUE}`"; \
if [ "$$found" != "" ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> $$found is already installed."; \
exit 1; \
fi
.endif
${_PKG_SILENT}${_PKG_DEBUG}if [ `${SH} -c umask` -ne ${DEF_UMASK} ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> Warning: your umask is \"`${SH} -c umask`"\".; \
${ECHO_MSG} "If this is not desired, set it to an appropriate value (${DEF_UMASK})"; \
${ECHO_MSG} "and install this package again by \`\`${MAKE} deinstall reinstall''."; \
fi
.if defined(PKG_DEVELOPER) && (${CHECK_FILES} == "YES")
${_PKG_SILENT}${_PKG_DEBUG}${ECHO_MSG} "${_PKGSRC_IN}> Generating pre-install file lists"
${_PKG_SILENT}${_PKG_DEBUG}${FIND} ${PREFIX} -type f -or -type l -print \
2>/dev/null ${CHECK_FILES_SKIP_CMD} >${WRKDIR}/.prefix.pre \
|| ${TRUE}
. if ${CHECK_FILES_STRICT} == "YES"
${_PKG_SILENT}${_PKG_DEBUG}${FIND} ${PKG_SYSCONFDIR} -print \
2>/dev/null ${CHECK_FILES_SKIP_CMD} >${WRKDIR}/.sysconfdir.pre \
|| ${TRUE}
${_PKG_SILENT}${_PKG_DEBUG}${FIND} ${VARBASE} -print \
2>/dev/null ${CHECK_FILES_SKIP_CMD} >${WRKDIR}/.varbase.pre \
|| ${TRUE}
. endif
.endif
.if defined(INSTALLATION_DIRS) && !empty(INSTALLATION_DIRS)
${_PKG_SILENT}${_PKG_DEBUG}${ECHO_MSG} "${_PKGSRC_IN}> Creating installation directories"
${_PKG_SILENT}${_PKG_DEBUG} \
for dir in ${INSTALLATION_DIRS}; do \
case $$dir in \
/*) ;; \
*bin|*bin/*|*libexec|*libexec/*) \
${INSTALL_PROGRAM_DIR} ${PREFIX}/$$dir ;; \
*man/*) \
${INSTALL_MAN_DIR} ${PREFIX}/$$dir ;; \
*) \
${INSTALL_DATA_DIR} ${PREFIX}/$$dir ;; \
esac; \
done
.endif # INSTALLATION_DIRS
.if !defined(NO_MTREE)
${_PKG_SILENT}${_PKG_DEBUG}if [ `${ID} -u` = `${ID} -u ${ROOT_USER}` ]; then \
if [ ! -f ${MTREE_FILE} ]; then \
${ECHO_MSG} "Error: mtree file \"${MTREE_FILE}\" is missing."; \
exit 1; \
else \
if [ ! -d ${PREFIX} ]; then \
${MKDIR} ${PREFIX}; \
fi; \
${MTREE} ${MTREE_ARGS} ${PREFIX}/; \
fi; \
else \
${ECHO_MSG} "Warning: not superuser, can't run mtree."; \
${ECHO_MSG} "Become ${ROOT_USER} and try again to ensure correct permissions."; \
fi
.else
${_PKG_SILENT}${_PKG_DEBUG}[ -d ${PREFIX} ] || ${MKDIR} ${PREFIX}
.endif # !NO_MTREE
.if !defined(NO_PKG_REGISTER)
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} pre-install-fake-pkg
.endif # !NO_PKG_REGISTER
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} pre-install-script
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} pre-install
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} do-install
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} post-install
${_PKG_SILENT}${DO_NADA} \
# \
# PLIST must be generated at this late point (instead of \
# depending on it somewhere earlier), because it needs \
# to be created _after_ the {pre,do,post}-install \
# targets are run. \
# \
# We generate _before_ post-install-script is run so \
# that the real config files and rc.d scripts aren't \
# listed in the PLIST. \
#
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} ${PLIST}
.if defined(PKG_DEVELOPER) && (${CHECK_FILES} == "YES")
${_PKG_SILENT}${_PKG_DEBUG}${ECHO_MSG} "${_PKGSRC_IN}> Generating post-install file lists"
${_PKG_SILENT}${_PKG_DEBUG}${FIND} ${PREFIX} -type f -or -type l -print \
2>/dev/null ${CHECK_FILES_SKIP_CMD} >${WRKDIR}/.prefix.post \
|| ${TRUE}
. if ${CHECK_FILES_STRICT} == "YES"
${_PKG_SILENT}${_PKG_DEBUG}${FIND} ${PKG_SYSCONFDIR} -print \
2>/dev/null ${CHECK_FILES_SKIP_CMD} >${WRKDIR}/.sysconfdir.post\
|| ${TRUE}
${_PKG_SILENT}${_PKG_DEBUG}${FIND} ${VARBASE} -print \
2>/dev/null ${CHECK_FILES_SKIP_CMD} >${WRKDIR}/.varbase.post \
|| ${TRUE}
. endif
.endif
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} post-install-script
${_PKG_SILENT}${_PKG_DEBUG}newmanpages=`${EGREP} -h \
'^([^@/]*/)*man/([^/]*/)?(man[1-9ln]/.*\.[1-9ln]|cat[1-9ln]/.*\.0)(\.gz)?$$' \
${PLIST} 2>/dev/null || ${TRUE}`; \
if [ X"${MANCOMPRESSED}" != X"" -a X"${MANZ}" = X"" ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> [Automatic manual page handling]"; \
${ECHO_MSG} "${_PKGSRC_IN}> Decompressing manual pages for ${PKGNAME}"; \
for manpage in $$newmanpages; do \
manpage=`${ECHO} $$manpage | ${SED} -e 's|\.gz$$||'`; \
if [ -h ${PREFIX}/$$manpage.gz ]; then \
set - `${LS} -l ${PREFIX}/$$manpage.gz | ${SED} -e 's|\.gz$$||'`; \
shift `expr $$# - 1`; \
${RM} -f ${PREFIX}/$$manpage; \
${LN} -s $${1} ${PREFIX}/$$manpage; \
${RM} ${PREFIX}/$$manpage.gz; \
else \
${GUNZIP_CMD} ${PREFIX}/$$manpage.gz; \
fi; \
if [ X"${PKG_VERBOSE}" != X"" ]; then \
${ECHO_MSG} "$$manpage"; \
fi; \
done; \
fi; \
if [ X"${MANCOMPRESSED}" = X"" -a X"${MANZ}" != X"" ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> [Automatic manual page handling]"; \
${ECHO_MSG} "${_PKGSRC_IN}> Compressing manual pages for ${PKGNAME}"; \
for manpage in $$newmanpages; do \
manpage=`${ECHO} $$manpage | ${SED} -e 's|\.gz$$||'`; \
if [ -h ${PREFIX}/$$manpage ]; then \
set - `${LS} -l ${PREFIX}/$$manpage`; \
shift `expr $$# - 1`; \
${RM} -f ${PREFIX}/$$manpage.gz; \
${LN} -s $${1}.gz ${PREFIX}/$$manpage.gz; \
${RM} ${PREFIX}/$$manpage; \
else \
${GZIP_CMD} ${PREFIX}/$$manpage; \
fi; \
if [ X"${PKG_VERBOSE}" != X"" ]; then \
${ECHO_MSG} "$$manpage"; \
fi; \
done; \
fi
.if ${_DO_SHLIB_CHECKS} == "yes"
. if ${PKG_INSTALLATION_TYPE} == "overwrite"
${_PKG_SILENT}${_PKG_DEBUG} \
${MAKE} ${MAKEFLAGS} do-shlib-handling SHLIB_PLIST_MODE=0
. endif
.endif
.ifdef MESSAGE
@${ECHO_MSG} "${_PKGSRC_IN}> Please note the following:"
@${ECHO_MSG} ""
@${CAT} ${MESSAGE}
@${ECHO_MSG} ""
. if !empty(PKGSRC_MESSAGE_RECIPIENTS)
${_PKG_SILENT}${_PKG_DEBUG} \
(${ECHO} "The ${PKGNAME} package was installed on `${HOSTNAME_CMD}` at `date`"; \
${ECHO} ""; \
${ECHO} "Please note the following:"; \
${ECHO} ""; \
${CAT} ${MESSAGE}; \
${ECHO} "") | \
${MAIL_CMD} -s"Package ${PKGNAME} installed on `${HOSTNAME_CMD}`" ${PKGSRC_MESSAGE_RECIPIENTS}
. endif
.endif
.if !defined(NO_PKG_REGISTER)
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} register-pkg
.endif # !NO_PKG_REGISTER
${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE}
.if defined(PKG_DEVELOPER) && (${CHECK_SHLIBS} == "YES")
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} check-shlibs
.endif
.if defined(PKG_DEVELOPER) && (${CHECK_FILES} == "YES")
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} check-files
.endif
# Do handling of shared libs for two cases:
#
# SHLIB_PLIST_MODE=1: when first called via the ${PLIST} target,
# update the PLIST to contain ELF symlink, run
# ldconfig on a.out, etc. (used when called via
# the ${PLIST} target). Will update ${PLIST}.
# SHLIB_PLIST_MODE=0: when called via the real-su-install target,
# actually generate symlinks for ELF, run ldconfig
# for a.out, etc. Will not modify ${PLIST}.
#
# XXX This target could need some cleanup after it was ripped out of
# real-su-install
#
_AOUT_AWK = \
BEGIN { linkc = 1 } \
/^@/ { lines[NR] = $$0; next } \
function libtool_release(lib) { \
if (gsub("-[^-]+\\.so\\.", ".so.", lib)) { \
if (system("${TEST} -h ${PREFIX}/" lib) == 0) { \
rels[NR] = lib; \
} \
} \
} \
/.*\/lib[^\/]+\.so\.[0-9]+\.[0-9]+\.[0-9]+$$/ { \
libtool_release($$0); \
lines[NR] = $$0; \
sub("\\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
sub("\\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
sub("\\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
if (sub("-[^-]+\\.so$$", ".so")) { \
links[linkc++] = $$0; \
} \
next \
} \
/.*\/lib[^\/]+\.so\.[0-9]+\.[0-9]+$$/ { \
libtool_release($$0); \
lines[NR] = $$0; \
sub("\\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
sub("\\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
if (sub("-[^-]+\\.so$$", ".so")) { \
links[linkc++] = $$0; \
} \
next \
} \
{ lines[NR] = $$0 } \
END { \
for (i = 0 ; i <= linkc ; i++) \
for (j = 1 ; j < NR ; j++) \
if (lines[j] == links[i]) \
lines[j] = "@comment " lines[j]; \
if (${SHLIB_PLIST_MODE}) \
for (i = 1 ; i <= NR ; i++) { \
print lines[i]; \
if (rels[i] != "") \
print rels[i]; \
} \
}
_DYLIB_AWK= \
/^@/ { lines[NR] = $$0; next } \
function libtool_release(lib) { \
if (gsub("\\.so\\.", ".", lib) || gsub("\\.so$$", "", lib)) { \
lib = lib ".dylib"; \
if (system("${TEST} -h ${PREFIX}/" lib) == 0) { \
rels[NR] = lib; \
} \
} \
} \
/.*\/lib[^\/]+\.so\.[0-9]+\.[0-9]+\.[0-9]+$$/ { \
libtool_release($$0); \
lines[NR] = $$0; \
links[linkc++] = $$0; \
sub("\\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
sub("\\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
sub("\\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
if (sub("-[^-]+\\.so$$", ".so")) { \
links[linkc++] = $$0; \
} \
next \
} \
/.*\/lib[^\/]+\.so\.[0-9]+\.[0-9]+$$/ { \
libtool_release($$0); \
lines[NR] = $$0; \
links[linkc++] = $$0; \
sub("\\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
sub("\\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
if (sub("-[^-]+\\.so$$", ".so")) { \
links[linkc++] = $$0; \
} \
next \
} \
/.*\/lib[^\/]+\.so\.[0-9]+$$/ { \
libtool_release($$0); \
lines[NR] = $$0; \
links[linkc++] = $$0; \
sub("\\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
if (sub("-[^-]+\\.so$$", ".so")) { \
links[linkc++] = $$0; \
} \
next \
} \
/.*\/lib[^\/]+\.so$$/ { \
lines[NR] = $$0; \
if (system("${TEST} -f ${PREFIX}/" $$0) == 0) { \
next; \
} \
libtool_release($$0); \
links[linkc++] = $$0; \
if (sub("-[^-]+\\.so$$", ".so")) { \
links[linkc++] = $$0; \
} \
next \
} \
{ lines[NR] = $$0 } \
END { \
for (i = 0 ; i <= linkc ; i++) \
for (j = 1 ; j <= NR ; j++) \
if (lines[j] == links[i]) \
lines[j] = "@comment " lines[j]; \
if (${SHLIB_PLIST_MODE}) \
for (i = 1 ; i <= NR ; i++) { \
print lines[i]; \
if (rels[i] != "") { \
print rels[i]; \
cmd = "${LS} -l ${PREFIX}/" rels[i]; \
cmd | getline tgt; \
close(cmd); \
gsub(".* ", "", tgt); \
if (tgts[tgt] == "") { \
tgts[tgt] = tgt; \
if (index(tgt, "/") == 1) \
print tgt; \
else { \
prefix=""; \
if (match(rels[i], ".*/") != 0) \
prefix=substr(rels[i],1,RLENGTH); \
print prefix tgt; \
} \
} \
} \
} \
}
# Turn lib*.so.*, lib*.so into lib*.so. Drop duplicates.
_AIXLIB_AWK= \
/^@/ { lines[NR] = $$0; next } \
/.*\/lib[^\/]+\.so(\.[0-9]+)*$$/ { \
sub("(\\.[0-9]+)*$$", ""); \
sub("\\.so$$", ".so"); \
lines[NR] = $$0; \
next \
} \
{ lines[NR] = $$0 } \
END { \
nlibs = 0; \
for (i = 1; i <= NR; i++) { \
for (j = 0; j < nlibs; j++) { \
if (libs[j] == lines[i]) \
break; \
} \
if (j >= nlibs) \
print lines[i]; \
if (match(lines[i], ".*/lib[^/]+\\.a$$")) { \
libs[nlibs] = lines[i]; \
nlibs++; \
} \
} \
}
.PHONY: do-shlib-handling
do-shlib-handling:
.if ${SHLIB_HANDLING} == "YES"
${_PKG_SILENT}${_PKG_DEBUG} \
sos=`${EGREP} -h '^.*/lib[^/]+\.so$$' ${PLIST} || ${TRUE}`; \
if [ "$$sos" != "" ]; then \
shlib_type=`${MAKE} ${MAKEFLAGS} show-shlib-type`; \
if [ "${SHLIB_PLIST_MODE}" = "0" ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> [Automatic $$shlib_type shared object handling]"; \
fi; \
case "$$shlib_type" in \
ELF) ;; \
aixlib) ;; \
"a.out") \
${AWK} '${_AOUT_AWK}' <${PLIST} >${PLIST}.tmp ; \
if [ "${SHLIB_PLIST_MODE}" = "1" ]; then \
${MV} ${PLIST}.tmp ${PLIST}; \
else \
${RM} ${PLIST}.tmp ; \
fi ; \
cnt=`${EGREP} -c '^@exec[ ]*${LDCONFIG}$$' ${PLIST} || ${TRUE}`; \
if [ "${SHLIB_PLIST_MODE}" = "1" ]; then \
if [ $$cnt -eq 0 ]; then \
${ECHO} "@exec ${LDCONFIG}" >> ${PLIST}; \
${ECHO} "@unexec ${LDCONFIG}" >> ${PLIST}; \
fi \
fi; \
if [ "${SHLIB_PLIST_MODE}" = "0" ]; then \
if [ "${PKG_VERBOSE}" != "" ]; then \
${ECHO_MSG} "$$sos"; \
${ECHO_MSG} "Running ${LDCONFIG}"; \
fi; \
${LDCONFIG} || ${TRUE}; \
fi \
;; \
"dylib") \
${AWK} '${_DYLIB_AWK}' <${PLIST} >${PLIST}.tmp && \
if [ "${SHLIB_PLIST_MODE}" = "1" ]; then \
${MV} ${PLIST}.tmp ${PLIST}; \
else \
${RM} ${PLIST}.tmp ; \
fi ; \
;; \
"*") \
if [ "${SHLIB_PLIST_MODE}" = "0" ]; then \
${ECHO_MSG} "No shared libraries for ${MACHINE_ARCH}"; \
fi ; \
if [ "${SHLIB_PLIST_MODE}" = "1" ]; then \
for so in $$sos; do \
if [ X"${PKG_VERBOSE}" != X"" ]; then \
${ECHO_MSG} >&2 "Ignoring $$so"; \
fi; \
${SED} -e "s;^$$so$$;@comment No shared objects - &;" \
${PLIST} >${PLIST}.tmp && ${MV} ${PLIST}.tmp ${PLIST}; \
done; \
fi ; \
;; \
esac; \
fi
.endif # SHLIB_HANDLING == "YES"
# Check if all binaries and shlibs find their needed libs
# Must be run after "make install", so that files are installed, and
# ${PLIST} exists.
#
.PHONY: check-shlibs
check-shlibs:
.if !defined(NO_PKG_REGISTER)
${_PKG_SILENT}${_PKG_DEBUG} \
bins=`${PKG_INFO} -qL ${PKGNAME} | { ${EGREP} -h '/(bin|sbin|libexec)/' || ${TRUE}; }`; \
if [ "${OBJECT_FMT}" = "ELF" ]; then \
shlibs=`${PKG_INFO} -qL ${PKGNAME} | { ${EGREP} -h '/lib/lib.*.so' || ${TRUE}; }`; \
elif [ "${OBJECT_FMT}" = "Mach-O" ]; then \
shlibs=`${PKG_INFO} -qL ${PKGNAME} | { ${EGREP} -h '/lib/lib.*.dylib' || ${TRUE}; }`; \
else \
shlibs=""; \
fi; \
if [ "X${LDD}" = X ]; then \
ldd=`${TYPE} ldd 2>/dev/null | ${AWK} '{ print $$NF }'`;\
else \
ldd="${LDD}"; \
fi; \
if [ -x "$$ldd" ]; then \
for i in $${bins} $${shlibs}; do \
err=`{ $$ldd $$i 2>&1 || ${TRUE}; } | { ${GREP} "not found" || ${TRUE}; }`; \
if [ "${PKG_VERBOSE}" != "" ]; then \
${ECHO} "$$ldd $$i"; \
fi; \
if [ "$$err" != "" ]; then \
${ECHO} "$$i: $$err"; \
error=1; \
fi; \
done; \
fi; \
if [ "$$error" = 1 ]; then \
${ECHO} "*** The above programs/libs will not find the listed shared libraries"; \
${ECHO} " at runtime. Please fix the package (add -Wl,-R.../lib in the right places)!"; \
${SHCOMMENT} Might not error-out for non-pkg-developers; \
exit 1; \
fi
.endif # NO_PKG_REGISTER
.if !target(show-shlib-type)
# Show the shared lib type being built: one of ELF, a.out, dylib, or none
.PHONY: show-shlib-type
show-shlib-type:
. if empty(USE_LANGUAGES)
@${ECHO} "none"
. elif ${_OPSYS_SHLIB_TYPE} == "ELF/a.out"
@cd ${WRKDIR} && \
sotype=none; \
if [ "X${MKPIC}" != "Xno" -a "X${NOPIC}" = "X" ]; then \
${ECHO} "int main() { return(0); }" > a.$$$$.c; \
${SETENV} PATH=${PATH} \
${CC} ${CFLAGS} a.$$$$.c -o a.$$$$.out; \
case `${FILE_CMD} a.$$$$.out` in \
*ELF*dynamically*) \
sotype=ELF ;; \
*shared*library*) \
sotype="a.out" ;; \
*dynamically*) \
sotype="a.out" ;; \
esac; \
fi; \
${ECHO} "$$sotype"; \
${RM} -f a.$$$$.c a.$$$$.out
. else
@${ECHO} ${_OPSYS_SHLIB_TYPE}
. endif # USE_LANGUAGES
.endif
# CHECK_FILES_SKIP is a list of file names that will be skipped when
# analyzing file lists in the check-files target. This is useful to
# avoid getting errors triggered by changes in directories not really
# handled by pkgsrc.
#
# We have to do this here, i.e., quite late in bsd.pkg.mk parsing, so
# that the variables used in them are defined. Otherwise we may get
# problems with the 'for' expressions.
.if defined(INFO_DIR)
CHECK_FILES_SKIP+= ${PREFIX}/${INFO_DIR}/dir
.endif
CHECK_FILES_SKIP+= ${PREFIX}/emul/linux/proc
.for e c in ${CONF_FILES} ${SUPPORT_FILES}
CHECK_FILES_SKIP+= ${c}/.pkgsrc
.endfor
.for e c o g m in ${CONF_FILES_PERMS} ${SUPPORT_FILES_PERMS}
CHECK_FILES_SKIP+= ${c}/.pkgsrc
.endfor
.for d in ${MAKE_DIRS} ${OWN_DIRS}
CHECK_FILES_SKIP+= ${d}
.endfor
.for d o g m in ${MAKE_DIRS_PERMS} ${OWN_DIRS_PERMS}
CHECK_FILES_SKIP+= ${d}
.endfor
CHECK_FILES_SKIP_CMD= | ${GREP} -v ${CHECK_FILES_SKIP:@f@-e ${f:Q}@}
# Check if the generated PLIST matches the list of really installed files.
#
.PHONY: check-files
check-files:
.if !defined(NO_PKG_REGISTER)
${_PKG_SILENT}${_PKG_DEBUG} \
errors=0; \
diff -u ${WRKDIR}/.prefix.pre ${WRKDIR}/.prefix.post \
>${WRKDIR}/.files.diff || ${TRUE}; \
${GREP} '^+/' ${WRKDIR}/.files.diff | ${SED} "s|^+||" | ${SORT} \
>${WRKDIR}/.files.added; \
${GREP} '^-/' ${WRKDIR}/.files.diff | ${SED} "s|^-||" | ${SORT} \
>${WRKDIR}/.files.deleted; \
if ${TEST} `${WC} -l ${WRKDIR}/.files.deleted | \
${AWK} '{ print $$1; }'` -gt 0; \
then \
echo "*** The following files have been deleted from" \
"${PREFIX}!"; \
${SED} "s|^| |" <${WRKDIR}/.files.deleted; \
errors=1; \
fi; \
${GREP} '^[A-Za-z]' ${PLIST} | ${SED} "s|^|${PREFIX}/|" | \
${SORT} >${WRKDIR}/.files.expected; \
if ! ${CMP} -s ${WRKDIR}/.files.expected ${WRKDIR}/.files.added; then \
echo "*** The PLIST does not match installed files!"; \
echo " The following files were not expected in ${PREFIX}:";\
diff -u ${WRKDIR}/.files.expected ${WRKDIR}/.files.added | \
${GREP} '^+[^+]' | ${SED} "s|^+| |"; \
errors=1; \
fi; \
if [ ${CHECK_FILES_STRICT} = "YES" ] && \
! ${CMP} -s ${WRKDIR}/.sysconfdir.pre ${WRKDIR}/.sysconfdir.post; \
then \
echo "*** The package has modified ${PKG_SYSCONFDIR}" \
"contents directly!"; \
echo " The offending files/directories are:"; \
diff -u ${WRKDIR}/.sysconfdir.pre ${WRKDIR}/.sysconfdir.post | \
${GREP} '^+[^+]' | ${SED} "s|^+| |"; \
errors=1; \
fi; \
if [ ${CHECK_FILES_STRICT} = "YES" ] && \
! ${CMP} -s ${WRKDIR}/.varbase.pre ${WRKDIR}/.varbase.post; then \
echo "*** The package has modified ${VARBASE} contents" \
"directly!"; \
echo " The offending files/directories are:"; \
diff -u ${WRKDIR}/.varbase.pre ${WRKDIR}/.varbase.post |\
${GREP} '^+[^+]' | ${SED} "s|^+| |"; \
errors=1; \
fi; \
${RM} -f ${WRKDIR}/.files.added ${WRKDIR}/.files.deleted \
${WRKDIR}/.files.diff ${WRKDIR}/.files.expected; \
${TEST} $$errors -eq 0
.endif
.PHONY: acquire-extract-lock acquire-patch-lock acquire-tools-lock
.PHONY: acquire-wrapper-lock acquire-configure-lock acquire-build-lock
.PHONY: acquire-install-lock acquire-package-lock
acquire-extract-lock:
${_ACQUIRE_LOCK}
acquire-patch-lock:
${_ACQUIRE_LOCK}
acquire-tools-lock:
${_ACQUIRE_LOCK}
acquire-wrapper-lock:
${_ACQUIRE_LOCK}
acquire-configure-lock:
${_ACQUIRE_LOCK}
acquire-build-lock:
${_ACQUIRE_LOCK}
acquire-install-lock:
${_ACQUIRE_LOCK}
acquire-package-lock:
${_ACQUIRE_LOCK}
.PHONY: release-extract-lock release-patch-lock release-tools-lock
.PHONY: release-wrapper-lock release-configure-lock release-build-lock
.PHONY: release-install-lock release-package-lock
release-extract-lock:
${_RELEASE_LOCK}
release-patch-lock:
${_RELEASE_LOCK}
release-tools-lock:
${_RELEASE_LOCK}
release-wrapper-lock:
${_RELEASE_LOCK}
release-configure-lock:
${_RELEASE_LOCK}
release-build-lock:
${_RELEASE_LOCK}
release-install-lock:
${_RELEASE_LOCK}
release-package-lock:
${_RELEASE_LOCK}
################################################################
# Skeleton targets start here
#
# You shouldn't have to change these. Either add the pre-* or
# post-* targets/scripts or redefine the do-* targets. These
# targets don't do anything other than checking for cookies and
# call the necessary targets/scripts.
################################################################
.PHONY: fetch
.if !target(fetch)
fetch:
@cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} real-fetch PKG_PHASE=fetch
.endif
.PHONY: extract
.if !target(extract)
extract: checksum ${WRKDIR} acquire-extract-lock ${EXTRACT_COOKIE} release-extract-lock
.endif
.PHONY: patch
.if !target(patch)
patch: extract acquire-patch-lock ${PATCH_COOKIE} release-patch-lock
.endif
.PHONY: tools
.if !target(tools)
tools: patch acquire-tools-lock ${TOOLS_COOKIE} release-tools-lock
.endif
.PHONY: wrapper
.if !target(wrapper)
wrapper: tools acquire-wrapper-lock ${WRAPPER_COOKIE} release-wrapper-lock
.endif
.PHONY: configure
.if !target(configure)
configure: wrapper acquire-configure-lock ${CONFIGURE_COOKIE} release-configure-lock
.endif
.PHONY: build
.if !target(build)
build: configure acquire-build-lock ${BUILD_COOKIE} release-build-lock
.endif
.PHONY: test
.if !target(test)
test: build ${TEST_COOKIE}
.endif
.PHONY: install
.if !target(install)
install: ${_PKGSRC_BUILD_TARGETS} acquire-install-lock ${INSTALL_COOKIE} release-install-lock
.endif
.PHONY: package
.if !target(package)
package: install acquire-package-lock ${PACKAGE_COOKIE} release-package-lock
.endif
.PHONY: replace
.if !target(replace)
replace: ${_PKGSRC_BUILD_TARGETS} real-replace
.endif
.PHONY: undo-replace
.if !target(undo-replace)
undo-replace: real-undo-replace
.endif
${EXTRACT_COOKIE}:
.if ${INTERACTIVE_STAGE:Mextract} == "extract" && defined(BATCH)
@${ECHO} "*** The extract stage of this package requires user interaction"
@${ECHO} "*** Please extract manually with \"cd ${PKGDIR} && ${MAKE} extract\""
@${TOUCH} ${INTERACTIVE_COOKIE}
@${FALSE}
.else
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} real-extract DEPENDS_TARGET=${DEPENDS_TARGET:Q} PKG_PHASE=extract
.endif
${PATCH_COOKIE}:
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} real-patch PKG_PHASE=patch
${TOOLS_COOKIE}:
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} real-tools PKG_PHASE=tools
${WRAPPER_COOKIE}:
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${BUILD_ENV} ${MAKE} ${MAKEFLAGS} real-wrapper PKG_PHASE=wrapper
PKG_ERROR_CLASSES+= configure
PKG_ERROR_MSG.configure= \
"" \
"There was an error during the \`\`configure'' phase." \
"Please investigate the following for more information:"
.if defined(GNU_CONFIGURE)
PKG_ERROR_MSG.configure+= \
" * config.log" \
" * ${WRKLOG}" \
""
.else
PKG_ERROR_MSG.configure+= \
" * log of the build" \
" * ${WRKLOG}" \
""
.endif
${CONFIGURE_COOKIE}:
.if ${INTERACTIVE_STAGE:Mconfigure} == "configure" && defined(BATCH)
@${ECHO} "*** The configuration stage of this package requires user interaction"
@${ECHO} "*** Please configure manually with \"cd ${PKGDIR} && ${MAKE} configure\""
@${TOUCH} ${INTERACTIVE_COOKIE}
@${FALSE}
.else
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${BUILD_ENV} ${MAKE} ${MAKEFLAGS} real-configure PKG_PHASE=configure || ${PKG_ERROR_HANDLER.configure}
.endif
PKG_ERROR_CLASSES+= build
PKG_ERROR_MSG.build= \
"" \
"There was an error during the \`\`build'' phase." \
"Please investigate the following for more information:" \
" * log of the build" \
" * ${WRKLOG}" \
""
${BUILD_COOKIE}:
.if ${INTERACTIVE_STAGE:Mbuild} == "build" && defined(BATCH)
@${ECHO} "*** The build stage of this package requires user interaction"
@${ECHO} "*** Please build manually with \"cd ${PKGDIR} && ${MAKE} build\""
@${TOUCH} ${INTERACTIVE_COOKIE}
@${FALSE}
.else
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${BUILD_ENV} ${MAKE} ${MAKEFLAGS} real-build PKG_PHASE=build || ${PKG_ERROR_HANDLER.build}
.endif
${TEST_COOKIE}:
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${BUILD_ENV} ${MAKE} ${MAKEFLAGS} real-test PKG_PHASE=test
${INSTALL_COOKIE}:
.if ${INTERACTIVE_STAGE:Minstall} == "install" && defined(BATCH)
@${ECHO} "*** The installation stage of this package requires user interaction"
@${ECHO} "*** Please install manually with \"cd ${PKGDIR} && ${MAKE} install\""
@${TOUCH} ${INTERACTIVE_COOKIE}
@${FALSE}
.else
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${BUILD_ENV} ${MAKE} ${MAKEFLAGS} real-install PKG_PHASE=install
.endif
${PACKAGE_COOKIE}:
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${BUILD_ENV} ${MAKE} ${MAKEFLAGS} real-package PKG_PHASE=package
.PHONY: extract-message patch-message tools-message wrapper-message
.PHONY: configure-message build-message test-message
extract-message:
@${ECHO_MSG} "${_PKGSRC_IN}> Extracting for ${PKGNAME}"
patch-message:
@${ECHO_MSG} "${_PKGSRC_IN}> Patching for ${PKGNAME}"
tools-message:
@${ECHO_MSG} "${_PKGSRC_IN}> Overriding tools for ${PKGNAME}"
wrapper-message:
@${ECHO_MSG} "${_PKGSRC_IN}> Creating toolchain wrappers for ${PKGNAME}"
configure-message:
@${ECHO_MSG} "${_PKGSRC_IN}> Configuring for ${PKGNAME}"
build-message:
@${ECHO_MSG} "${_PKGSRC_IN}> Building for ${PKGNAME}"
test-message:
@${ECHO_MSG} "${_PKGSRC_IN}> Testing for ${PKGNAME}"
.PHONY: extract-cookie patch-cookie tools-cookie wrapper-cookie
.PHONY: configure-cookie build-cookie test-cookie
extract-cookie:
${_PKG_SILENT}${_PKG_DEBUG}${ECHO} ${PKGNAME} >> ${EXTRACT_COOKIE}
patch-cookie:
${_PKG_SILENT}${_PKG_DEBUG} ${TOUCH} ${TOUCH_FLAGS} ${PATCH_COOKIE}
tools-cookie:
${_PKG_SILENT}${_PKG_DEBUG} ${TOUCH} ${TOUCH_FLAGS} ${TOOLS_COOKIE}
wrapper-cookie:
${_PKG_SILENT}${_PKG_DEBUG} ${TOUCH} ${TOUCH_FLAGS} ${WRAPPER_COOKIE}
configure-cookie:
${_PKG_SILENT}${_PKG_DEBUG} ${TOUCH} ${TOUCH_FLAGS} ${CONFIGURE_COOKIE}
build-cookie:
${_PKG_SILENT}${_PKG_DEBUG} ${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE}
test-cookie:
${_PKG_SILENT}${_PKG_DEBUG} ${TOUCH} ${TOUCH_FLAGS} ${TEST_COOKIE}
.ORDER: pre-fetch do-fetch post-fetch
.ORDER: extract-message install-depends pre-extract do-extract post-extract extract-cookie
.ORDER: patch-message pre-patch do-patch post-patch patch-cookie
.ORDER: tools-message pre-tools do-tools post-tools tools-cookie
.ORDER: wrapper-message pre-wrapper do-wrapper post-wrapper wrapper-cookie
.ORDER: configure-message pre-configure pre-configure-override do-configure post-configure configure-cookie
.ORDER: build-message pre-build do-build post-build build-cookie
.ORDER: test-message pre-test do-test post-test test-cookie
# Please note that the order of the following targets is important, and
# should not be modified (.ORDER is not recognised by make(1) in a serial
# make i.e. without -j n)
.PHONY: real-fetch real-extract real-patch
.PHONY: real-tools real-wrapper
.PHONY: real-configure real-build real-test real-install real-package
.PHONY: real-replace real-undo-replace
real-fetch: pre-fetch do-fetch post-fetch
real-extract: extract-message install-depends pre-extract do-extract post-extract extract-cookie
real-patch: patch-message pre-patch do-patch post-patch patch-cookie
real-tools: tools-message pre-tools do-tools post-tools tools-cookie
real-wrapper: wrapper-message pre-wrapper do-wrapper post-wrapper wrapper-cookie
real-configure: configure-message pre-configure pre-configure-override do-configure post-configure configure-cookie
real-build: build-message pre-build do-build post-build build-cookie
real-test: test-message pre-test do-test post-test test-cookie
real-install: do-su-install
real-package: do-su-package
real-replace: do-su-replace
real-undo-replace: do-su-undo-replace
_SU_TARGET= \
if [ `${ID} -u` = `${ID} -u ${ROOT_USER}` ]; then \
${MAKE} ${MAKEFLAGS} $$realtarget; \
elif [ "X${BATCH}" != X"" ]; then \
${ECHO_MSG} "Warning: Batch mode, not superuser, can't run $$action for ${PKGNAME}."; \
${ECHO_MSG} "Become ${ROOT_USER} and try again to ensure correct permissions."; \
else \
args=""; \
if [ "X${FORCE_PKG_REGISTER}" != X"" ]; then \
args="FORCE_PKG_REGISTER=1"; \
fi; \
if [ "X${PKG_DEBUG_LEVEL}" != X"" ]; then \
args="$$args PKG_DEBUG_LEVEL=${PKG_DEBUG_LEVEL}"; \
fi; \
if [ "X${PRE_ROOT_CMD}" != "X${TRUE}" ]; then \
${ECHO} "*** WARNING *** Running: ${PRE_ROOT_CMD}"; \
${PRE_ROOT_CMD}; \
fi; \
${ECHO_MSG} "${_PKGSRC_IN}> Becoming ${ROOT_USER}@`${HOSTNAME_CMD}` to $$action ${PKGBASE}."; \
${ECHO_N} "`${ECHO} ${SU_CMD} | ${AWK} '{ print $$1 }'` ";\
${SU_CMD} "cd ${.CURDIR}; ${SETENV} PATH=$${PATH}:${SU_CMD_PATH_APPEND} ${MAKE} $$args ${MAKEFLAGS} $$realtarget $$realflags"; \
fi
.PHONY: do-su-install
do-su-install:
${_PKG_SILENT}${_PKG_DEBUG} \
extractname=`${CAT} ${EXTRACT_COOKIE}`; \
case "$$extractname" in \
"") ${ECHO_MSG} "*** Warning: ${WRKDIR} may contain an older version of ${PKGBASE}" ;; \
"${PKGNAME}") ;; \
*) ${ECHO_MSG} "*** Warning: Package version $$extractname in ${WRKDIR}"; \
${ECHO_MSG} "*** Current version ${PKGNAME} in pkgsrc directory"; \
${ECHO_MSG} "*** Cleaning and rebuilding the newer version of the package..."; \
${MAKE} clean && ${MAKE} build ;; \
esac
@${ECHO_MSG} "${_PKGSRC_IN}> Installing for ${PKGNAME}"
${_PKG_SILENT}${_PKG_DEBUG} \
realtarget="real-su-install"; \
action="install"; \
${_SU_TARGET}
.PHONY: do-su-package
do-su-package:
@${ECHO_MSG} "${_PKGSRC_IN}> Packaging ${PKGNAME}"
${_PKG_SILENT}${_PKG_DEBUG} \
realtarget="real-su-package"; \
action="package"; \
${_SU_TARGET}
.PHONY: do-su-replace
do-su-replace:
@${ECHO_MSG} "${_PKGSRC_IN}> Replacing ${PKGNAME}"
${_PKG_SILENT}${_PKG_DEBUG} \
realtarget="real-su-replace"; \
action="replace"; \
${_SU_TARGET}
.PHONY: do-su-undo-replace
do-su-undo-replace:
@${ECHO_MSG} "${_PKGSRC_IN}> Undoing Replacement of ${PKGNAME}"
${_PKG_SILENT}${_PKG_DEBUG} \
realtarget="real-su-undo-replace"; \
action="undo-replace"; \
${_SU_TARGET}
# Empty pre-* and post-* targets
.for name in fetch extract patch tools wrapper configure build test install-script install package
. if !target(pre-${name})
pre-${name}:
@${DO_NADA}
. endif
. if !target(post-${name})
post-${name}:
@${DO_NADA}
. endif
.endfor
# Reinstall
#
# Special target to re-run install
.PHONY: reinstall
.if !target(reinstall)
reinstall:
${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE} ${PLIST}
${_PKG_SILENT}${_PKG_DEBUG}DEPENDS_TARGET=${DEPENDS_TARGET:Q} ${MAKE} ${MAKEFLAGS} install
.endif
# Deinstall
#
# Special target to remove installation
.PHONY: deinstall do-su-deinstall
.if !target(deinstall)
deinstall: do-su-deinstall
.if !target(do-su-deinstall)
do-su-deinstall:
@${ECHO_MSG} "${_PKGSRC_IN}> Deinstalling for ${PKGBASE}"
${_PKG_SILENT}${_PKG_DEBUG} \
realtarget="real-su-deinstall"; \
realflags="DEINSTALLDEPENDS=${DEINSTALLDEPENDS}"; \
action="deinstall"; \
${_SU_TARGET}
.endif
. if (${DEINSTALLDEPENDS} != "NO")
. if (${DEINSTALLDEPENDS} != "ALL")
# used for removing stuff in bulk builds
real-su-deinstall-flags+= -r -R
# used for "update" target
. else
real-su-deinstall-flags+= -r
. endif
. endif
. ifdef PKG_VERBOSE
real-su-deinstall-flags+= -v
. endif
. ifdef PKG_PRESERVE
. if (${UPDATE_RUNNING} == "YES")
# used to update w/o removing any files
real-su-deinstall-flags+= -N -f
. endif
. endif
.PHONY: real-su-deinstall
real-su-deinstall:
${_PKG_SILENT}${_PKG_DEBUG} \
found="`${PKG_INFO} -e \"${PKGNAME}\" || ${TRUE}`"; \
case "$$found" in \
"") found="`${PKG_BEST_EXISTS} \"${PKGWILDCARD}\" || ${TRUE}`" ;; \
esac; \
if [ "$$found" != "" ]; then \
${ECHO} Running ${PKG_DELETE} ${real-su-deinstall-flags} $$found ; \
${PKG_DELETE} ${real-su-deinstall-flags} $$found || ${TRUE} ; \
fi
. if (${DEINSTALLDEPENDS} != "NO") && (${DEINSTALLDEPENDS} != "ALL")
@${SHCOMMENT} Also remove BUILD_DEPENDS:
. for pkg in ${BUILD_DEPENDS:C/:.*$//}
${_PKG_SILENT}${_PKG_DEBUG} \
found="`${PKG_BEST_EXISTS} \"${pkg}\" || ${TRUE}`"; \
if [ "$$found" != "" ]; then \
${ECHO} Running ${PKG_DELETE} $$found; \
${PKG_DELETE} ${real-su-deinstall-flags} $$found || ${TRUE}; \
fi
. endfor
. endif # DEINSTALLDEPENDS
@${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
.endif # target(deinstall)
################################################################
# Some more targets supplied for users' convenience
################################################################
# The 'update' target can be used to update a package and all
# currently installed packages that depend upon this package.
.PHONY: update
.if !target(update)
.if exists(${DDIR})
RESUMEUPDATE?= YES
CLEAR_DIRLIST?= NO
update:
${_PKG_SILENT}${_PKG_DEBUG}${ECHO_MSG} \
"${_PKGSRC_IN}> Resuming update for ${PKGNAME}"
. if ${REINSTALL} != "NO" && ${UPDATE_TARGET} != "replace"
${_PKG_SILENT}${_PKG_DEBUG} \
${MAKE} ${MAKEFLAGS} deinstall UPDATE_RUNNING=YES DEINSTALLDEPENDS=ALL
. endif
.else
RESUMEUPDATE?= NO
CLEAR_DIRLIST?= YES
update:
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} ${DDIR}
. if ${UPDATE_TARGET} != "replace"
${_PKG_SILENT}${_PKG_DEBUG}if ${PKG_INFO} -qe ${PKGBASE}; then \
${MAKE} ${MAKEFLAGS} deinstall UPDATE_RUNNING=YES DEINSTALLDEPENDS=ALL \
|| (${RM} ${DDIR} && ${FALSE}); \
fi
. endif
.endif
${_PKG_SILENT}${_PKG_DEBUG} \
${MAKE} ${MAKEFLAGS} ${UPDATE_TARGET} KEEP_WRKDIR=YES \
DEPENDS_TARGET=${DEPENDS_TARGET:Q}
${_PKG_SILENT}${_PKG_DEBUG} \
[ ! -s ${DDIR} ] || for dep in `${CAT} ${DDIR}` ; do \
(if cd ../.. && cd "$${dep}" ; then \
${ECHO_MSG} "${_PKGSRC_IN}> Installing in $${dep}" && \
if [ "(" "${RESUMEUPDATE}" = "NO" -o \
"${REINSTALL}" != "NO" ")" -a \
"${UPDATE_TARGET}" != "replace" ] ; then \
${MAKE} ${MAKEFLAGS} deinstall UPDATE_RUNNING=YES; \
fi && \
${MAKE} ${MAKEFLAGS} ${UPDATE_TARGET} \
DEPENDS_TARGET=${DEPENDS_TARGET:Q} ; \
else \
${ECHO_MSG} "${_PKGSRC_IN}> Skipping removed directory $${dep}"; \
fi) ; \
done
.if ${NOCLEAN} == "NO"
${_PKG_SILENT}${_PKG_DEBUG} \
${MAKE} ${MAKEFLAGS} clean-update CLEAR_DIRLIST=YES
.endif
.PHONY: clean-update
clean-update:
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} ${DDIR}
${_PKG_SILENT}${_PKG_DEBUG} \
if [ -s ${DDIR} ] ; then \
for dep in `${CAT} ${DDIR}` ; do \
(if cd ../.. && cd "$${dep}" ; then \
${MAKE} ${MAKEFLAGS} clean ; \
else \
${ECHO_MSG} "${_PKGSRC_IN}> Skipping removed directory $${dep}";\
fi) ; \
done ; \
fi
.if ${CLEAR_DIRLIST} != "NO"
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} clean
.else
${_PKG_SILENT}${_PKG_DEBUG} \
${MAKE} ${MAKEFLAGS} clean update-dirlist \
DIRLIST="`${CAT} ${DDIR}`" PKGLIST="`${CAT} ${DLIST}`"
${_PKG_SILENT}${_PKG_DEBUG}${ECHO_MSG} \
"${_PKGSRC_IN}> Warning: preserved leftover directory list. Your next";\
${ECHO_MSG} "${_PKGSRC_IN}> \`\`${MAKE} update'' may fail. It is advised to use";\
${ECHO_MSG} "${_PKGSRC_IN}> \`\`${MAKE} update REINSTALL=YES'' instead!"
.endif
.endif # !target(update)
.PHONY: update-dirlist
update-dirlist:
${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} -p ${WRKDIR}
.ifdef PKGLIST
. for __tmp__ in ${PKGLIST}
${_PKG_SILENT}${_PKG_DEBUG}${ECHO} >>${DLIST} "${__tmp__}"
. endfor
.endif
.ifdef DIRLIST
. for __tmp__ in ${DIRLIST}
${_PKG_SILENT}${_PKG_DEBUG}${ECHO} >>${DDIR} "${__tmp__}"
. endfor
.endif
${DDIR}: ${DLIST}
${_PKG_SILENT}${_PKG_DEBUG} \
ddir=`${SED} 's:-[^-]*$$::' ${DLIST}`; \
${ECHO} >${DDIR}; \
for pkg in $${ddir} ; do \
if ${PKG_INFO} -b "$${pkg}" >/dev/null 2>&1 ; then \
${PKG_INFO} -b "$${pkg}" | ${SED} -ne \
's,\([^/]*/[^/]*\)/Makefile:.*,\1,p' | \
${HEAD} -1 >>${DDIR}; \
fi ; \
done
${DLIST}: ${WRKDIR}
${_PKG_SILENT}${_PKG_DEBUG} \
{ ${PKG_DELETE} -n "${PKGWILDCARD}" 2>&1 | \
${GREP} '^ ' | \
${AWK} '{ l[NR]=$$0 } END { for (i=NR;i>0;--i) print l[i] }' \
|| ${TRUE}; } > ${DLIST}
# The 'info' target can be used to display information about a package.
.PHONY: info
info:
${_PKG_SILENT}${_PKG_DEBUG}${PKG_INFO} "${PKGWILDCARD}"
# The 'check' target can be used to check an installed package.
.PHONY: check
check:
${_PKG_SILENT}${_PKG_DEBUG}${PKG_ADMIN} check "${PKGWILDCARD}"
# The 'list' target can be used to list the files installed by a package.
.PHONY: list
list:
${_PKG_SILENT}${_PKG_DEBUG}${PKG_INFO} -L "${PKGWILDCARD}"
# Run pkglint:
.PHONY: lint
lint:
${_PKG_SILENT}${_PKG_DEBUG}${LOCALBASE}/bin/pkglint | ${GREP} -v ^OK
# Create a binary package from an install package using "pkg_tarup"
.PHONY: tarup
tarup:
.if ${PKG_INSTALLATION_TYPE} == "overwrite"
${_PKG_SILENT}${_PKG_DEBUG} \
${RM} -f ${PACKAGES}/All/${PKGNAME}${PKG_SUFX}; \
${SETENV} PKG_DBDIR=${_PKG_DBDIR} PKG_SUFX=${PKG_SUFX} \
PKGREPOSITORY=${PACKAGES}/All \
${LOCALBASE}/bin/pkg_tarup ${PKGNAME}; \
for CATEGORY in ${CATEGORIES}; do \
${MKDIR} ${PACKAGES}/$$CATEGORY; \
cd ${PACKAGES}/$$CATEGORY; \
${RM} -f ${PKGNAME}${PKG_SUFX}; \
${LN} -s ../All/${PKGNAME}${PKG_SUFX}; \
done
.endif
# shared code for replace and undo-replace
_REPLACE= \
if [ -f ${_PKG_DBDIR}/$$oldpkgname/+REQUIRED_BY ]; then \
${MV} ${_PKG_DBDIR}/$$oldpkgname/+REQUIRED_BY ${WRKDIR}/.req; \
fi; \
${MAKE} deinstall UPDATE_RUNNING=YES; \
$$replace_action; \
if [ -f ${WRKDIR}/.req ]; then \
${MV} ${WRKDIR}/.req ${_PKG_DBDIR}/$$newpkgname/+REQUIRED_BY; \
for pkg in `${CAT} ${_PKG_DBDIR}/$$newpkgname/+REQUIRED_BY`; do \
${SETENV} NEWPKGNAME=$$newpkgname \
${AWK} '/^@pkgdep '$$oldpkgname'/ { print "@pkgdep " ENVIRON["NEWPKGNAME"]; next } { print }' \
< ${_PKG_DBDIR}/$$pkg/+CONTENTS > ${_PKG_DBDIR}/$$pkg/+CONTENTS.$$$$ && \
${MV} ${_PKG_DBDIR}/$$pkg/+CONTENTS.$$$$ ${_PKG_DBDIR}/$$pkg/+CONTENTS; \
done; \
fi
# replace a package in place - not for the faint-hearted
.PHONY: real-su-replace
real-su-replace:
${_PKG_SILENT}${_PKG_DEBUG} \
${ECHO_MSG} "*** WARNING - experimental target - data loss may be experienced ***"; \
if [ -x ${LOCALBASE}/bin/pkg_tarup ]; then \
${SETENV} PKGREPOSITORY=${WRKDIR} ${LOCALBASE}/bin/pkg_tarup ${PKGBASE}; \
else \
${ECHO} "No ${LOCALBASE}/bin/pkg_tarup binary - can't pkg_tarup ${PKGBASE}"; \
exit 1; \
fi
${_PKG_SILENT}${_PKG_DEBUG} \
oldpkgname=`${PKG_BEST_EXISTS} "${PKGWILDCARD}"`; \
newpkgname=${PKGNAME}; \
${ECHO} "$$oldpkgname" > ${WRKDIR}/.replace; \
replace_action="${MAKE} install"; \
${_REPLACE}
# undo the replacement of a package - not for the faint-hearted either
.PHONY: real-su-undo-replace
real-su-undo-replace:
${_PKG_SILENT}${_PKG_DEBUG} \
if [ ! -f ${WRKDIR}/.replace ]; then \
${ECHO_MSG} "No replacement to undo"; \
exit 1; \
fi
${_PKG_SILENT}${_PKG_DEBUG} \
${ECHO_MSG} "*** WARNING - experimental target - data loss may be experienced ***"; \
oldpkgname=${PKGNAME}; \
newpkgname=`${CAT} ${WRKDIR}/.replace`; \
replace_action="${SETENV} ${PKG_ADD} ${WRKDIR}/$$newpkgname${PKG_SUFX}"; \
${_REPLACE}; \
${RM} ${WRKDIR}/.replace
# This is for the use of sites which store distfiles which others may
# fetch - only fetch the distfile if it is allowed to be
# re-distributed freely
.PHONY: mirror-distfiles
mirror-distfiles:
.if !defined(NO_SRC_ON_FTP)
@${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} fetch NO_SKIP=yes
.endif
# Cleaning up
.PHONY: pre-clean
.if !target(pre-clean)
pre-clean:
@${DO_NADA}
.endif
.PHONY: clean
.if !target(clean)
clean: pre-clean
. if (${CLEANDEPENDS} != "NO") && (!empty(BUILD_DEPENDS) || !empty(DEPENDS))
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} clean-depends
. endif
@${ECHO_MSG} "${_PKGSRC_IN}> Cleaning for ${PKGNAME}"
${_PKG_SILENT}${_PKG_DEBUG} \
if [ -d ${WRKDIR} ]; then \
if [ -w ${WRKDIR} ]; then \
${RM} -rf ${WRKDIR}; \
else \
${ECHO_MSG} "${_PKGSRC_IN}> ${WRKDIR} not writable, skipping"; \
fi; \
fi
. ifdef WRKOBJDIR
-${_PKG_SILENT}${_PKG_DEBUG} \
${RMDIR} ${BUILD_DIR} 2>/dev/null; \
${RM} -f ${WRKDIR_BASENAME}
. endif
.endif
.PHONY: clean-depends
.if !target(clean-depends)
clean-depends:
. if !empty(BUILD_DEPENDS) || !empty(DEPENDS)
${_PKG_SILENT}${_PKG_DEBUG} \
for i in `${MAKE} ${MAKEFLAGS} show-all-depends-dirs-excl`; do \
cd ${.CURDIR}/../../$$i && \
${MAKE} ${MAKEFLAGS} CLEANDEPENDS=NO clean; \
done
. endif
.endif
.PHONY: pre-distclean
.if !target(pre-distclean)
pre-distclean:
@${DO_NADA}
.endif
.PHONY: cleandir
.if !target(cleandir)
cleandir: clean
.endif
.PHONY: distclean
.if !target(distclean)
distclean: pre-distclean clean
${_PKG_SILENT}${ECHO_MSG} "${_PKGSRC_IN}> Dist cleaning for ${PKGNAME}"
${_PKG_SILENT}${_PKG_DEBUG}if [ -d ${_DISTDIR} ]; then \
cd ${_DISTDIR} && \
${TEST} -z "${DISTFILES}" || ${RM} -f ${DISTFILES}; \
if [ "${PKG_RESUME_TRANSFERS:M[Yy][Ee][Ss]}" ]; then \
${TEST} -z "${DISTFILES}.temp" || ${RM} -f ${DISTFILES}.temp; \
fi; \
${TEST} -z "${PATCHFILES}" || ${RM} -f ${PATCHFILES}; \
fi
. if defined(DIST_SUBDIR) && exists(DIST_SUBDIR)
-${_PKG_SILENT}${_PKG_DEBUG}${RMDIR} ${_DISTDIR}
. endif
-${_PKG_SILENT}${_PKG_DEBUG}${RM} -f README.html
.endif
# Prints out a script to fetch all needed files (no checksumming).
.PHONY: fetch-list
.if !target(fetch-list)
fetch-list:
@${ECHO} '#!/bin/sh'
@${ECHO} '#'
@${ECHO} '# This is an auto-generated script, the result of running'
@${ECHO} '# `${MAKE} fetch-list'"'"' in directory "'"`${PWD_CMD}`"'"'
@${ECHO} '# on host "'"`${UNAME} -n`"'" on "'"`date`"'".'
@${ECHO} '#'
@${MAKE} ${MAKEFLAGS} fetch-list-recursive
.endif # !target(fetch-list)
.PHONY: fetch-list-recursive
.if !target(fetch-list-recursive)
fetch-list-recursive:
${_PKG_SILENT}${_PKG_DEBUG} \
for dir in `${MAKE} ${MAKEFLAGS} show-all-depends-dirs`; do \
(cd ../../$$dir && \
${MAKE} ${MAKEFLAGS} fetch-list-one-pkg \
| ${AWK} ' \
/^[^#]/ { FoundSomething = 1 } \
/^unsorted/ { gsub(/[[:space:]]+/, " \\\n\t") } \
/^echo/ { gsub(/;[[:space:]]+/, "\n") } \
{ block[line_c++] = $$0 } \
END { if (FoundSomething) \
for (line = 0; line < line_c; line++) \
print block[line] } \
') \
done
.endif # !target(fetch-list-recursive)
.PHONY: fetch-list-one-pkg
.if !target(fetch-list-one-pkg)
fetch-list-one-pkg:
. if !empty(_ALLFILES)
@${ECHO}
@${ECHO} '#'
@location=`${PWD_CMD} | ${AWK} -F / '{ print $$(NF-1) "/" $$NF }'`; \
${ECHO} '# Need additional files for ${PKGNAME} ('$$location')...'
@${ECHO} '#'
@${MKDIR} ${_DISTDIR}
. for fetchfile in ${_ALLFILES}
. if defined(_FETCH_MESSAGE)
@(cd ${_DISTDIR}; \
if [ ! -f ${fetchfile:T} ]; then \
${ECHO}; \
filesize=`${AWK} ' \
/^Size/ && $$2 == "(${fetchfile})" { print $$4 } \
' ${DISTINFO_FILE}` || true; \
${ECHO} '# Prompt user to get ${fetchfile} ('$${filesize-???}' bytes) manually:'; \
${ECHO} '#'; \
${ECHO} ${_FETCH_MESSAGE:Q}; \
fi)
. elif defined(DYNAMIC_MASTER_SITES)
@(cd ${_DISTDIR}; \
if [ ! -f ${fetchfile:T} ]; then \
${ECHO}; \
filesize=`${AWK} ' \
/^Size/ && $$2 == "(${fetchfile})" { print $$4 } \
' ${DISTINFO_FILE}` || true; \
${ECHO} '# Fetch ${fetchfile} ('$${filesize-???}' bytes):'; \
${ECHO} '#'; \
${ECHO} '${SH} -s ${fetchfile:T} <<"EOF" |('; \
${CAT} ${FILESDIR}/getsite.sh; \
${ECHO} EOF; \
${ECHO} read unsorted_sites; \
${ECHO} 'unsorted_sites="$${unsorted_sites} ${_MASTER_SITE_BACKUP}"'; \
${ECHO} sites='"'${ORDERED_SITES:Q}'"'; \
${ECHO} "${MKDIR} ${_DISTDIR}"; \
${ECHO} 'cd ${_DISTDIR} && [ -f ${fetchfile} -o -f ${fetchfile:T} ] ||'; \
${ECHO} 'for site in $$sites; do'; \
${ECHO} ' ${FETCH_CMD} ${FETCH_BEFORE_ARGS} "$${site}${fetchfile:T}" ${FETCH_AFTER_ARGS} && break ||'; \
${ECHO} ' ${ECHO} ${fetchfile} not fetched'; \
${ECHO} done; \
${ECHO} ')'; \
fi)
. else
@(cd ${_DISTDIR}; \
if [ ! -f ${fetchfile:T} ]; then \
${ECHO}; \
filesize=`${AWK} ' \
/^Size/ && $$2 == "(${fetchfile})" { print $$4 } \
' ${DISTINFO_FILE}` || true; \
${ECHO} '# Fetch ${fetchfile} ('$${filesize-???}' bytes):'; \
${ECHO} '#'; \
${ECHO} 'unsorted_sites="${SITES_${fetchfile:T:S/=/--/}} ${_MASTER_SITE_BACKUP}"'; \
${ECHO} sites='"'${ORDERED_SITES:Q}'"'; \
${ECHO} "${MKDIR} ${_DISTDIR}"; \
${ECHO} 'cd ${_DISTDIR} && [ -f ${fetchfile} -o -f ${fetchfile:T} ] ||'; \
${ECHO} 'for site in $$sites; do'; \
${ECHO} ' ${FETCH_CMD} ${FETCH_BEFORE_ARGS} "$${site}${fetchfile:T}" ${FETCH_AFTER_ARGS} && break ||'; \
${ECHO} ' ${ECHO} ${fetchfile} not fetched'; \
${ECHO} done; \
fi)
. endif # defined(_FETCH_MESSAGE) || defined(DYNAMIC_MASTER_SITES)
. endfor
. endif # !empty(_ALLFILES)
.endif # !target(fetch-list-one-pkg)
# Checksumming utilities
.PHONY: makesum
.if !target(makesum)
makesum: fetch uptodate-digest
${_PKG_SILENT}${_PKG_DEBUG} \
newfile=${DISTINFO_FILE}.$$$$; \
if [ -f ${DISTINFO_FILE} ]; then \
${GREP} '^.NetBSD' ${DISTINFO_FILE} > $$newfile || \
(${ECHO_N} "$$" > $$newfile && \
${ECHO_N} "NetBSD" >> $$newfile && \
${ECHO} "$$" >> $$newfile) \
else \
${ECHO_N} "$$" > $$newfile; \
${ECHO_N} "NetBSD" >> $$newfile; \
${ECHO} "$$" >> $$newfile; \
fi; \
${ECHO} "" >> $$newfile; \
cd ${DISTDIR}; \
for sumfile in "" ${_CKSUMFILES}; do \
if [ "X$$sumfile" = "X" ]; then continue; fi; \
for a in "" ${DIGEST_ALGORITHMS}; do \
if [ "X$$a" = "X" ]; then continue; fi; \
${DIGEST} $$a $$sumfile >> $$newfile; \
done; \
${WC} -c $$sumfile | ${AWK} '{ print "Size (" $$2 ") = " $$1 " bytes" }' >> $$newfile; \
done; \
for ignore in "" ${_IGNOREFILES}; do \
if [ "X$$ignore" = "X" ]; then continue; fi; \
for a in "" ${DIGEST_ALGORITHMS}; do \
if [ "X$$a" = "X" ]; then continue; fi; \
${ECHO} "$$a ($$ignore) = IGNORE" >> $$newfile; \
done; \
done; \
if [ -f ${DISTINFO_FILE} ]; then \
${AWK} '$$2 ~ /\(patch-[a-z0-9]+\)/ { print $$0 }' < ${DISTINFO_FILE} >> $$newfile; \
fi; \
if ${CMP} -s $$newfile ${DISTINFO_FILE}; then \
${RM} -f $$newfile; \
${ECHO_MSG} "=> distinfo: distfiles part unchanged."; \
else \
${MV} $$newfile ${DISTINFO_FILE}; \
fi
.endif
.if !target(makepatchsum)
makepatchsum mps: uptodate-digest
${_PKG_SILENT}${_PKG_DEBUG} \
newfile=${DISTINFO_FILE}.$$$$; \
if [ -f ${DISTINFO_FILE} ]; then \
${AWK} '$$2 !~ /\(patch-[a-z0-9]+\)/ { print $$0 }' < ${DISTINFO_FILE} >> $$newfile; \
else \
${ECHO_N} "$$" > $$newfile; \
${ECHO_N} "NetBSD" >> $$newfile; \
${ECHO} "$$" >> $$newfile; \
${ECHO} "" >> $$newfile; \
fi; \
if [ -d ${PATCHDIR} ]; then \
(cd ${PATCHDIR}; \
for sumfile in "" patch-*; do \
if [ "X$$sumfile" = "X" ]; then continue; fi; \
if [ "X$$sumfile" = "Xpatch-*" ]; then break; fi; \
case $$sumfile in \
patch-local-*) ;; \
*.orig|*.rej|*~) continue ;; \
*) ${ECHO} "${PATCH_DIGEST_ALGORITHM} ($$sumfile) = `${SED} -e '/\$$NetBSD.*/d' $$sumfile | ${DIGEST} ${PATCH_DIGEST_ALGORITHM}`" >> $$newfile;; \
esac; \
done); \
fi; \
if ${CMP} -s $$newfile ${DISTINFO_FILE}; then \
${RM} -f $$newfile; \
${ECHO_MSG} "=> distinfo: patches part unchanged."; \
else \
${MV} $$newfile ${DISTINFO_FILE}; \
fi
.endif
# This target is done by invoking a sub-make so that DISTINFO_FILE gets
# re-evaluated after the "makepatchsum" target is made. This can be
# made into:
#makedistinfo mdi: makepatchsum makesum
# once a combined distinfo file exists for all packages
.if !target(makedistinfo)
makedistinfo mdi distinfo: makepatchsum
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} makesum
.endif
.PHONY: checksum
.if !target(checksum)
checksum: fetch uptodate-digest
${_PKG_SILENT}${_PKG_DEBUG} \
if [ ! -f ${DISTINFO_FILE} ]; then \
${ECHO_MSG} "=> No checksum file."; \
else \
(cd ${DISTDIR}; OK="true"; missing=""; \
for file in "" ${_CKSUMFILES}; do \
if [ "X$$file" = X"" ]; then continue; fi; \
filesummed=false; \
for a in ${DIGEST_ALGORITHMS}; do \
CKSUM2=`${AWK} 'NF == 4 && $$1 == "'$$a'" && $$2 == "('$$file')" && $$3 == "=" {print $$4;}' ${DISTINFO_FILE}`; \
case "$${CKSUM2}" in \
"") ${ECHO_MSG} "=> No $$a checksum recorded for $$file."; \
;; \
*) filesummed=true; \
CKSUM=`${DIGEST} $$a < $$file`; \
if [ "$$CKSUM2" = "IGNORE" ]; then \
${ECHO_MSG} "=> Checksum for $$file is set to IGNORE in checksum file even though"; \
${ECHO_MSG} " the file is not in the "'$$'"{IGNOREFILES} list."; \
OK="false"; \
elif [ "$$CKSUM" = "$$CKSUM2" ]; then \
${ECHO_MSG} "=> Checksum $$a OK for $$file."; \
else \
${ECHO_MSG} "=> Checksum $$a mismatch for $$file."; \
OK="false"; \
fi ;; \
esac; \
done; \
case "$$filesummed" in \
false) missing="$$missing $$file"; \
OK=false ;; \
esac; \
done; \
for file in "" ${_IGNOREFILES}; do \
if [ "X$$file" = X"" ]; then continue; fi; \
CKSUM2=`${AWK} 'NF == 4 && $$3 == "=" && $$2 == "('$$file')"{print $$4;}' ${DISTINFO_FILE}`; \
if [ "$$CKSUM2" = "" ]; then \
${ECHO_MSG} "=> No checksum recorded for $$file, file is in "'$$'"{IGNOREFILES} list."; \
OK="false"; \
elif [ "$$CKSUM2" != "IGNORE" ]; then \
${ECHO_MSG} "=> Checksum for $$file is not set to IGNORE in checksum file even though"; \
${ECHO_MSG} " the file is in the "'$$'"{IGNOREFILES} list."; \
OK="false"; \
fi; \
done; \
if [ "$$OK" != "true" ]; then \
case "$$missing" in \
"") ;; \
*) ${ECHO_MSG} "Missing checksums for $$missing";; \
esac; \
${ECHO_MSG} "Make sure the Makefile and checksum file (${DISTINFO_FILE})"; \
${ECHO_MSG} "are up to date. If you want to override this check, type"; \
${ECHO_MSG} "\"${MAKE} NO_CHECKSUM=yes [other args]\"."; \
exit 1; \
fi) ; \
fi
.endif
# List of sites carrying binary pkgs. Variables "rel" and "arch" are
# replaced with OS release ("1.5", ...) and architecture ("mipsel", ...)
BINPKG_SITES?= \
ftp://ftp.NetBSD.org/pub/NetBSD/packages/$${rel}/$${arch}
# List of flags to pass to pkg_add(1) for bin-install:
BIN_INSTALL_FLAGS?= # -v
.if ${PKG_INSTALLATION_TYPE} == "pkgviews"
PKG_ARGS_ADD= -W ${LOCALBASE} -w ${DEFAULT_VIEW}
.endif
_BIN_INSTALL_FLAGS= ${BIN_INSTALL_FLAGS}
_BIN_INSTALL_FLAGS+= ${PKG_ARGS_ADD}
# Install binary pkg, without strict uptodate-check first
.PHONY: real-su-bin-install
real-su-bin-install:
@found="`${PKG_BEST_EXISTS} \"${PKGWILDCARD}\" || ${TRUE}`"; \
if [ "$$found" != "" ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> $$found is already installed - perhaps an older version?"; \
${ECHO_MSG} "*** If so, you may wish to \`\`pkg_delete $$found'' and install"; \
${ECHO_MSG} "*** this package again by \`\`${MAKE} bin-install'' to upgrade it properly."; \
${SHCOMMENT} ${ECHO_MSG} "*** or use \`\`${MAKE} bin-update'' to upgrade it and all of its dependencies."; \
exit 1; \
fi
@if [ -f ${PKGFILE} ] ; then \
${ECHO_MSG} "Installing from binary pkg ${PKGFILE}" ; \
${PKG_ADD} ${_BIN_INSTALL_FLAGS} ${PKGFILE} ; \
else \
rel=`${UNAME} -r | ${SED} 's@\.\([0-9]*\)[\._].*@\.\1@'`; \
arch=${MACHINE_ARCH}; \
for site in ${BINPKG_SITES} ; do \
${ECHO} Trying `eval ${ECHO} $$site`/All ; \
${SHCOMMENT} ${ECHO} ${SETENV} PKG_PATH="`eval ${ECHO} $$site`/All" ${PKG_ADD} ${_BIN_INSTALL_FLAGS} ${PKGNAME}${PKG_SUFX} ; \
if ${SETENV} PKG_PATH="`eval ${ECHO} $$site`/All" ${PKG_ADD} ${BIN_INSTALL_FLAGS} ${PKGNAME}${PKG_SUFX} ; then \
${ECHO} "${PKGNAME} successfully installed."; \
break ; \
fi ; \
done ; \
if ! ${PKG_INFO} -qe "${PKGNAME}" ; then \
${SHCOMMENT} Cycle through some FTP server here ;\
${ECHO_MSG} "Installing from source" ; \
${MAKE} ${MAKEFLAGS} package \
DEPENDS_TARGET=${DEPENDS_TARGET:Q} && \
${MAKE} ${MAKEFLAGS} clean ; \
fi ; \
fi
.PHONY: bin-install
bin-install:
@${ECHO_MSG} "${_PKGSRC_IN}> Binary install for ${PKGNAME}"
${_PKG_SILENT}${_PKG_DEBUG} \
realtarget="real-su-bin-install"; \
action="binary install"; \
${_SU_TARGET}
################################################################
# The special package-building targets
# You probably won't need to touch these
################################################################
# Set to "html" by the README.html target to generate HTML code,
# or to "svr4" to print SVR4 (Solaris, ...) short package names, from
# SVR4_PKGNAME variable.
# This variable is passed down via build-depends-list and run-depends-list
PACKAGE_NAME_TYPE?= name
# Nobody should want to override this unless PKGNAME is simply bogus.
HTML_PKGNAME=<a href="../../${PKGPATH:S/&/\&/g:S/>/\>/g:S/</\</g}/README.html">${PKGNAME:S/&/\&/g:S/>/\>/g:S/</\</g}</A>
.PHONY: package-name
.if !target(package-name)
package-name:
. if (${PACKAGE_NAME_TYPE} == "html")
@${ECHO} '<a href="../../${PKGPATH:S/&/\&/g:S/>/\>/g:S/</\</g}/README.html">${PKGNAME:S/&/\&/g:S/>/\>/g:S/</\</g}</A>'
. elif (${PACKAGE_NAME_TYPE} == "svr4")
@${ECHO} ${SVR4_PKGNAME}
. else
@${ECHO} ${PKGNAME}
. endif # PACKAGE_NAME_TYPE
.endif # !target(package-name)
.PHONY: make-readme-html-help
.if !target(make-readme-html-help)
make-readme-html-help:
@${ECHO} '${PKGNAME:S/&/\&/g:S/>/\>/g:S/</\</g}</a>: <TD>'${COMMENT:S/&/\&/g:S/>/\>/g:S/</\</g:Q}
.endif # !target(make-readme-html-help)
# Show (recursively) all the packages this package depends on.
# If PACKAGE_DEPENDS_WITH_PATTERNS is set, print as pattern (if possible)
PACKAGE_DEPENDS_WITH_PATTERNS?=true
.PHONY: run-depends-list
.if !target(run-depends-list)
run-depends-list:
. for dep in ${DEPENDS}
@pkg="${dep:C/:.*//}"; \
dir="${dep:C/[^:]*://}"; \
cd ${.CURDIR}; \
if ${PACKAGE_DEPENDS_WITH_PATTERNS}; then \
${ECHO} "$$pkg"; \
else \
if cd $$dir 2>/dev/null; then \
${MAKE} ${MAKEFLAGS} package-name PACKAGE_NAME_TYPE=${PACKAGE_NAME_TYPE}; \
else \
${ECHO_MSG} "Warning: \"$$dir\" non-existent -- @pkgdep registration incomplete" >&2; \
fi; \
fi
. endfor
.endif # target(run-depends-list)
# Build a package but don't check the package cookie
.PHONY: repackage
.if !target(repackage)
repackage: pre-repackage package
.PHONY: pre-repackage
pre-repackage:
${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${PACKAGE_COOKIE}
.endif
# Build a package but don't check the cookie for installation, also don't
# install package cookie
.PHONY: package-noinstall
.if !target(package-noinstall)
package-noinstall:
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} PACKAGE_NOINSTALL=yes real-package
.endif
################################################################
# Dependency checking
################################################################
.PHONY: install-depends pre-install-depends
pre-install-depends:
.if !target(install-depends)
# Tells whether to halt execution if the object formats differ
FATAL_OBJECT_FMT_SKEW?= yes
WARN_NO_OBJECT_FMT?= yes
install-depends: pre-install-depends
. if !empty(DEPENDS) || !empty(BUILD_DEPENDS)
. if defined(NO_DEPENDS)
@${DO_NADA}
. else # !DEPENDS
. for dep in ${DEPENDS} ${BUILD_DEPENDS}
${_PKG_SILENT}${_PKG_DEBUG} \
pkg="${dep:C/:.*//}"; \
dir="${dep:C/[^:]*://:C/:.*$//}"; \
found=`${PKG_BEST_EXISTS} "$$pkg" || ${TRUE}`; \
if [ "X$$REBUILD_DOWNLEVEL_DEPENDS" != "X" ]; then \
pkgname=`cd $$dir ; ${MAKE} ${MAKEFLAGS} show-var VARNAME=PKGNAME`; \
if [ "X$$found" != "X" -a "X$$found" != "X$${pkgname}" ]; then \
${ECHO_MSG} "ignoring old installed package \"$$found\""; \
found=""; \
fi; \
fi; \
if [ "$$found" != "" ]; then \
instobjfmt=`${PKG_INFO} -B "$$found" | ${AWK} -F'=[ \t]*' '/^OBJECT_FMT/ {print $$2; exit}'`; \
if [ "$$instobjfmt" = "" ]; then \
if [ "X${WARN_NO_OBJECT_FMT}" != "Xno" ]; then \
${ECHO} "WARNING: Unknown object format for installed package $$found - continuing"; \
fi; \
elif [ "$$instobjfmt" != "${OBJECT_FMT}" ]; then \
${ECHO} "Installed package $$found is an $$instobjfmt package."; \
${ECHO} "You are building an ${OBJECT_FMT} package, which will not inter-operate."; \
${ECHO} "Please update the $$found package to ${OBJECT_FMT}"; \
if [ "X${FATAL_OBJECT_FMT_SKEW}" != "Xno" ]; then \
exit 1; \
fi; \
fi; \
${ECHO_MSG} "${_PKGSRC_IN}> Required installed package $$pkg: $${found} found"; \
else \
${ECHO_MSG} "${_PKGSRC_IN}> Required package $$pkg: NOT found"; \
target=${DEPENDS_TARGET:Q}; \
${ECHO_MSG} "${_PKGSRC_IN}> Verifying $$target for $$dir"; \
if [ ! -d $$dir ]; then \
${ECHO_MSG} "=> No directory for $$dir. Skipping.."; \
else \
cd $$dir ; \
${SETENV} _PKGSRC_DEPS=", ${PKGNAME}${_PKGSRC_DEPS}" ${MAKE} ${MAKEFLAGS} $$target PKGNAME_REQD=\'$$pkg\' MAKEFLAGS="" || exit 1; \
${ECHO_MSG} "${_PKGSRC_IN}> Returning to build of ${PKGNAME}"; \
fi; \
fi
. endfor # DEPENDS
. endif # !NO_DEPENDS
. endif # DEPENDS
.endif
.PHONY: build-depends-list
.if !target(build-depends-list)
build-depends-list:
@for dir in `${MAKE} ${MAKEFLAGS} show-all-depends-dirs-excl`; \
do \
(cd ../../$$dir && \
${MAKE} ${MAKEFLAGS} package-name) \
done
.endif
# If PACKAGES is set to the default (../../pkgsrc/packages), the current
# ${MACHINE_ARCH} and "release" (uname -r) will be used. Otherwise a directory
# structure of ...pkgsrc/packages/`uname -r`/${MACHINE_ARCH} is assumed.
# The PKG_URL is set from FTP_PKG_URL_* or CDROM_PKG_URL_*, depending on
# the target used to generate the README.html file.
.PHONY: binpkg-list
.if !target(binpkg-list)
binpkg-list:
@if ${TEST} -d ${PACKAGES}; then \
cd ${PACKAGES}; \
case ${.CURDIR} in \
*/pkgsrc/packages) \
for pkg in ${PKGREPOSITORYSUBDIR}/${PKGWILDCARD}${PKG_SUFX} ; \
do \
if [ -f "$$pkg" ] ; then \
pkgname=`${ECHO} $$pkg | ${SED} 's@.*/@@'`; \
${ECHO} "<TR><TD>${MACHINE_ARCH}:<TD><a href=\"${PKG_URL}/$$pkg\">$$pkgname</a><TD>(${OPSYS} ${OS_VERSION})"; \
fi ; \
done ; \
;; \
*) \
cd ${PACKAGES}/../..; \
for i in [1-9].*/*; do \
if cd ${PACKAGES}/../../$$i/${PKGREPOSITORYSUBDIR} 2>/dev/null; then \
for j in ${PKGWILDCARD}${PKG_SUFX}; \
do \
if [ -f "$$j" ]; then \
${ECHO} $$i/$$j;\
fi; \
done; \
fi; \
done | ${AWK} -F/ ' \
{ \
release = $$1; \
arch = $$2; \
pkg = $$3; \
gsub("\\.tgz","", pkg); \
if (arch != "m68k" && arch != "mipsel") { \
if (arch in urls) \
urls[arch "/" pkg "/" release] = "<a href=\"${PKG_URL}/" release "/" arch "/${PKGREPOSITORYSUBDIR}/" pkg "${PKG_SUFX}\">" pkg "</a>, " urls[arch]; \
else \
urls[arch "/" pkg "/" release] = "<a href=\"${PKG_URL}/" release "/" arch "/${PKGREPOSITORYSUBDIR}/" pkg "${PKG_SUFX}\">" pkg "</a> "; \
} \
} \
END { \
for (av in urls) { \
split(av, ava, "/"); \
arch=ava[1]; \
pkg=ava[2]; \
release=ava[3]; \
print "<TR><TD>" arch ":<TD>" urls[av] "<TD>(${OPSYS} " release ")"; \
} \
}' | ${SORT} \
;; \
esac; \
fi
.endif
################################################################
# Everything after here are internal targets and really
# shouldn't be touched by anybody but the release engineers.
################################################################
# This target generates an index entry suitable for aggregation into
# a large index. Format is:
#
# distribution-name|package-path|installation-prefix|comment| \
# description-file|maintainer|categories|build deps|run deps|for arch| \
# not for opsys
#
.PHONY: describe
.if !target(describe)
describe:
@${ECHO_N} "${PKGNAME}|${.CURDIR}|"; \
${ECHO_N} "${PREFIX}|"; \
${ECHO_N} ${COMMENT:Q}; \
if [ -f ${DESCR_SRC} ]; then \
${ECHO_N} "|${DESCR_SRC}"; \
else \
${ECHO_N} "|/dev/null"; \
fi; \
${ECHO_N} "|${MAINTAINER}|${CATEGORIES}|"; \
case "A${BUILD_DEPENDS}B${DEPENDS}C" in \
ABC) ;; \
*) cd ${.CURDIR} && ${ECHO_N} `${MAKE} ${MAKEFLAGS} build-depends-list | ${SORT} -u`;; \
esac; \
${ECHO_N} "|"; \
if [ "${DEPENDS}" != "" ]; then \
cd ${.CURDIR} && ${ECHO_N} `${MAKE} ${MAKEFLAGS} run-depends-list | ${SORT} -u`; \
fi; \
${ECHO_N} "|"; \
if [ "${ONLY_FOR_ARCHS}" = "" ]; then \
${ECHO_N} "any"; \
else \
${ECHO_N} "${ONLY_FOR_ARCHS}"; \
fi; \
${ECHO_N} "|"; \
if [ "${NOT_FOR_OPSYS}" = "" ]; then \
${ECHO_N} "any"; \
else \
${ECHO_N} "not ${NOT_FOR_OPSYS}"; \
fi; \
${ECHO} ""
.endif
.PHONY: readmes
.if !target(readmes)
readmes: readme
.endif
# This target is used to generate README.html files
.PHONY: readme
.if !target(readme)
FTP_PKG_URL_HOST?= ftp://ftp.NetBSD.org
FTP_PKG_URL_DIR?= /pub/NetBSD/packages
readme:
@cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} README.html PKG_URL=${FTP_PKG_URL_HOST}${FTP_PKG_URL_DIR}
.endif
# This target is used to generate README.html files, very like "readme"
# However, a different target was used for ease of use.
.PHONY: cdrom-readme
.if !target(cdrom-readme)
CDROM_PKG_URL_HOST?= file://localhost
CDROM_PKG_URL_DIR?= /usr/pkgsrc/packages
cdrom-readme:
@cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} README.html PKG_URL=${CDROM_PKG_URL_HOST}${CDROM_PKG_URL_DIR}
.endif
README_NAME= ${TEMPLATES}/README.pkg
# set up the correct license information as a sed expression
.ifdef LICENSE
SED_LICENSE_EXPR= -e 's|%%LICENSE%%|<p>Please note that this package has a ${LICENSE} license.</p>|'
.else
SED_LICENSE_EXPR= -e 's|%%LICENSE%%||'
.endif
# set up the "more info URL" information as a sed expression
.ifdef HOMEPAGE
SED_HOMEPAGE_EXPR= -e 's|%%HOMEPAGE%%|<p>This package has a home page at <a HREF="${HOMEPAGE}">${HOMEPAGE}</a>.</p>|'
.else
SED_HOMEPAGE_EXPR= -e 's|%%HOMEPAGE%%||'
.endif
.PHONY: show-vulnerabilities-html
show-vulnerabilities-html:
${_PKG_SILENT}${_PKG_DEBUG} \
if [ -f ${PKGVULNDIR}/pkg-vulnerabilities ]; then \
${AWK} '/^${PKGBASE}[-<>=]+[0-9]/ { gsub("\<", "\\<", $$1); \
gsub("\>", "\\>", $$1); \
printf("<LI><STRONG>%s has a %s exploit (see <a href=\"%s\">%s</a> for more details)</STRONG></LI>\n", $$1, $$2, $$3, $$3) }' \
${PKGVULNDIR}/pkg-vulnerabilities; \
fi
# If PACKAGES is set to the default (../../packages), the current
# ${MACHINE_ARCH} and "release" (uname -r) will be used. Otherwise a directory
# structure of ...pkgsrc/packages/`uname -r`/${MACHINE_ARCH} is assumed.
# The PKG_URL is set from FTP_PKG_URL_* or CDROM_PKG_URL_*, depending on
# the target used to generate the README.html file.
.PHONY: README.html
README.html: .PRECIOUS
@${SETENV} AWK=${AWK} BMAKE=${MAKE} ../../mk/scripts/mkdatabase -f $@.tmp1
@if ${TEST} -d ${PACKAGES}; then \
cd ${PACKAGES}; \
case `${PWD_CMD}` in \
${PKGSRCDIR}/packages) \
MULTIARCH=no; \
;; \
*) \
MULTIARCH=yes; \
;; \
esac; \
cd ${.CURDIR} ; \
fi; \
${AWK} -f ../../mk/scripts/genreadme.awk \
builddependsfile=/dev/null \
dependsfile=/dev/null \
DISTDIR=${DISTDIR} \
MACHINE_ARCH=${MACHINE_ARCH} \
MULTIARCH=$$MULTIARCH \
OPSYS=${OPSYS} \
OS_VERSION=${OS_VERSION} \
PACKAGES=${PACKAGES} \
PKG_SUFX=${PKG_SUFX} \
PKG_URL=${PKG_URL} \
PKGREPOSITORYSUBDIR=${PKGREPOSITORYSUBDIR} \
PKGSRCDIR=${.CURDIR:C|/[^/]*/[^/]*$||} \
TMPDIR=${TMPDIR:U/tmp} \
SINGLEPKG=${PKGPATH} \
$@.tmp1
@${RM} $@.tmp1
.PHONY: show-pkgtools-version
.if !target(show-pkgtools-version)
show-pkgtools-version:
@${ECHO} ${PKGTOOLS_VERSION}
.endif
# convenience target, to display make variables from command line
# i.e. "make show-var VARNAME=var", will print var's value
.PHONY: show-var
show-var:
@${ECHO} ${${VARNAME}:Q}
# enhanced version of target above, to display multiple variables
.PHONY: show-vars
show-vars:
.for VARNAME in ${VARNAMES}
@${ECHO} ${${VARNAME}:Q}
.endfor
.PHONY: print-build-depends-list
.if !target(print-build-depends-list)
print-build-depends-list:
. if !empty(BUILD_DEPENDS) || !empty(DEPENDS)
@${ECHO_N} 'This package requires package(s) "'
@${ECHO_N} `${MAKE} ${MAKEFLAGS} build-depends-list | ${SORT} -u`
@${ECHO} '" to build.'
. endif
.endif
.PHONY: print-run-depends-list
.if !target(print-run-depends-list)
print-run-depends-list:
. if !empty(DEPENDS)
@${ECHO_N} 'This package requires package(s) "'
@${ECHO_N} `${MAKE} ${MAKEFLAGS} run-depends-list | ${SORT} -u`
@${ECHO} '" to run.'
. endif
.endif
# This target is used by the mk/scripts/mkreadme script to generate
# README.html files
.PHONY: print-summary-data
.if !target(print-summary-data)
print-summary-data:
@${ECHO} "depends ${PKGPATH} ${DEPENDS}"
@${ECHO} "build_depends ${PKGPATH} ${BUILD_DEPENDS}"
@${ECHO} "conflicts ${PKGPATH} ${CONFLICTS}"
@${ECHO} "index ${PKGPATH} ${PKGNAME}"
@${ECHO} htmlname ${PKGPATH} ${HTML_PKGNAME:Q}
@${ECHO} homepage ${PKGPATH} ${HOMEPAGE:Q}
@${ECHO} wildcard ${PKGPATH} ${PKGWILDCARD:Q}
@${ECHO} comment ${PKGPATH} ${COMMENT:Q}
@${ECHO} license ${PKGPATH} ${LICENSE:Q}
@if [ "${ONLY_FOR_ARCHS}" = "" ]; then \
${ECHO} "onlyfor ${PKGPATH} any"; \
else \
${ECHO} "onlyfor ${PKGPATH} ${ONLY_FOR_ARCHS}"; \
fi;
@if [ "${NOT_FOR_OPSYS}" = "" ]; then \
${ECHO} "notfor ${PKGPATH} any"; \
else \
${ECHO} "notfor ${PKGPATH} not ${NOT_FOR_OPSYS}"; \
fi;
@${ECHO} "maintainer ${PKGPATH} ${MAINTAINER}"
@${ECHO} "categories ${PKGPATH} ${CATEGORIES}"
@if [ -f ${DESCR_SRC} ]; then \
${ECHO} "descr ${PKGPATH} ${DESCR_SRC:S;${PKGSRCDIR}/;;g}"; \
else \
${ECHO} "descr ${PKGPATH} /dev/null"; \
fi
@${ECHO} "prefix ${PKGPATH} ${PREFIX}"
.endif
.if !target(show-license)
show-license show-licence:
@if [ "${LICENSE}" != "" ]; then \
if ${TEST} -f ${PKGSRCDIR}/licenses/${LICENSE}; then \
if [ "${PAGER}" != "" ]; then \
${PAGER} ${PKGSRCDIR}/licenses/${LICENSE};\
else \
${CAT} ${PKGSRCDIR}/licenses/${LICENSE};\
fi \
else \
${ECHO} "Generic ${LICENSE} information not available"; \
${ECHO} "See the package description (pkg_info -d ${PKGNAME}) for more information."; \
fi \
fi
.endif
# Stat all the files of one pkg and sum the sizes up.
#
# XXX This is intended to be run before pkg_create is called, so the
# existence of ${PLIST} can be assumed.
.PHONY: print-pkg-size-this
print-pkg-size-this:
@${SHCOMMENT} "This pkg's files" ; \
${AWK} 'BEGIN { base = "${PREFIX}/" } \
/^@cwd/ { base = $$2 "/" } \
/^@/ { next } \
{ print base $$0 }' \
<${PLIST} \
| ${SORT} -u \
| ${SED} -e "s/'/'\\\\''/g" -e "s/.*/'&'/" \
| ${XARGS} -n 256 ${LS} -ld \
| ${AWK} '{ s += $$5; } END { print s; }' \
# Sizes of required pkgs (only)
#
# XXX This is intended to be run before pkg_create is called, so the
# dependencies are all installed.
.PHONY: print-pkg-size-depends
print-pkg-size-depends:
@pkglist=`${MAKE} ${MAKEFLAGS} run-depends-list`; \
if [ "X$${pkglist}" != "X" ]; then \
${ECHO} $${pkglist} \
| ${XARGS} -n 1 ${SETENV} ${PKG_BEST_EXISTS} \
| ${SORT} -u \
| ${XARGS} -n 256 ${SETENV} ${PKG_INFO} -qs \
| ${AWK} '/^[0-9]+$$/ { s += $$1; } END { print s; }'; \
else \
${ECHO} "0"; \
fi
###
### Automatic PLIST generation
### - files & symlinks first
### - @dirrm statements last
### - empty directories are handled properly
### - dirs from mtree files are excluded
### - substitute for platform or package specifics substrings
###
### Usage:
### - make install
### - make print-PLIST | brain >PLIST
###
_PRINT_PLIST_AWK_SUBST={ \
gsub(/${OPSYS}/, "$${OPSYS}"); \
gsub(/${OS_VERSION:S/./\./g}/, "$${OS_VERSION}"); \
gsub(/${MACHINE_GNU_PLATFORM}/, "$${MACHINE_GNU_PLATFORM}"); \
gsub(/${MACHINE_ARCH}/, "$${MACHINE_ARCH}"); \
gsub(/${MACHINE_GNU_ARCH}/, "$${MACHINE_GNU_ARCH}");
.if !empty(LOWER_VENDOR)
_PRINT_PLIST_AWK_SUBST+= gsub(/${LOWER_VENDOR}/, "$${LOWER_VENDOR}");
.endif
_PRINT_PLIST_AWK_SUBST+= \
gsub(/${LOWER_OS_VERSION:S/./\./g}/, "$${LOWER_OS_VERSION}"); \
gsub(/${LOWER_OPSYS}/, "$${LOWER_OPSYS}"); \
gsub(/${PKGNAME_NOREV}/, "$${PKGNAME}"); \
gsub(/${PKGVERSION:S/./\./g:C/nb[0-9]*$$//}/, "$${PKGVERSION}");\
gsub(/${PKGLOCALEDIR}\/locale/, "$${PKGLOCALEDIR}/locale"); \
}
_PRINT_PLIST_AWK_IGNORE= ($$0 ~ /emul\/linux\/proc/)
_PRINT_PLIST_AWK_IGNORE+= || ($$0 ~ /^info\/dir$$/)
.if defined(INFO_DIR) && empty(INFO_DIR:Minfo)
_PRINT_PLIST_AWK_IGNORE+= || ($$0 ~ /^${INFO_DIR:S|/|\\/|g}\/dir$$/)
.endif
.if !empty(INFO_FILES)
. for _f_ in ${INFO_FILES}
_PRINT_PLIST_AWK_IGNORE+= || ($$0 ~ /^${INFO_DIR:S|/|\\/|g}\/${_f_:S|+|\+|g}(-[0-9]+)?(\.gz)?$$/)
. endfor
.endif
# Common (system) directories not to generate @dirrm statements for
# Reads MTREE_FILE and generate awk statements that will
# sort out which directories NOT to include into the PLIST @dirrm list
.if make(print-PLIST)
_PRINT_PLIST_COMMON_DIRS!= ${AWK} 'BEGIN { \
i=0; \
stack[i]="${PREFIX}" ; \
cwd=""; \
} \
! ( /^\// || /^\#/ || /^$$/ ) { \
if ( $$1 == ".." ){ \
i=i-1; \
cwd = stack[i]; \
} else if ( $$1 == "." ){ \
} else { \
stack[i] = cwd ; \
if ( i == 0 ){ \
cwd = $$1 ; \
} else { \
cwd = cwd "\\/" $$1 ; \
} \
print "/^" cwd "$$$$/ { next; }"; \
i=i+1 ; \
} \
} \
END { print "{ print $$$$0; }"; } \
' <${MTREE_FILE}
.endif
# scan $PREFIX for any files/dirs modified since the package was extracted
# will emit "@exec mkdir"-statements for empty directories
# XXX will fail for data files that were copied using tar (e.g. emacs)!
# XXX should check $LOCALBASE and $X11BASE, and add @cwd statements
_PRINT_PLIST_FILES_CMD= \
${FIND} ${PREFIX}/. -xdev -newer ${EXTRACT_COOKIE} \! -type d -print
_PRINT_PLIST_DIRS_CMD= \
${FIND} ${PREFIX}/. -xdev -newer ${EXTRACT_COOKIE} -type d -print
_PRINT_LA_LIBNAMES= ${SETENV} ECHO=${ECHO:Q} GREP=${GREP:Q} SORT=${SORT:Q} \
${SH} ${.CURDIR}/../../mk/scripts/print-la-libnames
.if !empty(LIBTOOLIZE_PLIST:M[yY][eE][sS])
_PRINT_PLIST_LIBTOOLIZE_FILTER?= \
( \
if ${TEST} -d ${WRKDIR}; then \
tmpdir="${WRKDIR}"; \
else \
tmpdir="$${TMPDIR-/tmp}"; \
fi; \
fileslist="$$tmpdir/print.plist.files.$$$$"; \
libslist="$$tmpdir/print.plist.libs.$$$$"; \
while read file; do \
case $$file in \
*.la) \
${_PRINT_LA_LIBNAMES} $$file >> $$libslist; \
;; \
esac; \
${ECHO} "$$file"; \
done > $$fileslist; \
if ${TEST} -f "$$libslist"; then \
${GREP} -hvxF "`${SORT} -u $$libslist`" "$$fileslist"; \
else \
${CAT} "$$fileslist"; \
fi; \
${RM} -f "$$fileslist" "$$libslist"; \
)
.else
_PRINT_PLIST_LIBTOOLIZE_FILTER?= ${CAT}
.endif
.PHONY: print-PLIST
.if !target(print-PLIST)
print-PLIST:
${_PKG_SILENT}${_PKG_DEBUG}\
${ECHO} '@comment $$'NetBSD'$$'
${_PKG_SILENT}${_PKG_DEBUG}\
shlib_type=`${MAKE} ${MAKEFLAGS} show-shlib-type`; \
case $$shlib_type in \
"a.out") genlinks=1 ;; \
*) genlinks=0 ;; \
esac; \
${_PRINT_PLIST_FILES_CMD} \
| ${_PRINT_PLIST_LIBTOOLIZE_FILTER} \
| ${SORT} \
| ${AWK} ' \
{ sub("${PREFIX}/\\./", ""); } \
${_PRINT_PLIST_AWK_IGNORE} { next; } \
${_PRINT_PLIST_AWK_SUBST} \
/^@/ { print $$0; next } \
/.*\/lib[^\/]+\.so\.[0-9]+\.[0-9]+\.[0-9]+$$/ { \
print $$0; \
sub("\\.[0-9]+$$", ""); \
if ('$$genlinks') print $$0; \
sub("\\.[0-9]+$$", ""); \
if ('$$genlinks') print $$0; \
sub("\\.[0-9]+$$", ""); \
if ('$$genlinks') print $$0; \
next; \
} \
/.*\/lib[^\/]+\.so\.[0-9]+\.[0-9]+$$/ { \
print $$0; \
sub("\\.[0-9]+$$", ""); \
if ('$$genlinks') print $$0; \
sub("\\.[0-9]+$$", ""); \
if ('$$genlinks') print $$0; \
next; \
} \
${PRINT_PLIST_AWK} \
{ print $$0; }'
${_PKG_SILENT}${_PKG_DEBUG}\
for i in `${_PRINT_PLIST_DIRS_CMD} \
| ${SORT} -r \
| ${AWK} ' \
/emul\/linux\/proc/ { next; } \
/${PREFIX:S|/|\\/|g}\/\.$$/ { next; } \
{ sub("${PREFIX}/\\\\./", ""); } \
${_PRINT_PLIST_COMMON_DIRS}'` ; \
do \
if [ `${LS} -la ${PREFIX}/$$i | ${WC} -l` = 3 ]; then \
${ECHO} @exec \$${MKDIR} %D/$$i | ${AWK} ' \
${PRINT_PLIST_AWK} \
{ print $$0; }' ; \
fi ; \
${ECHO} @dirrm $$i | ${AWK} ' \
${PRINT_PLIST_AWK} \
{ print $$0; }' ; \
done \
| ${AWK} '${_PRINT_PLIST_AWK_SUBST} { print $$0; }'
.endif # target(print-PLIST)
# By default, all packages attempt to link into the views.
.if ${PKG_INSTALLATION_TYPE} == "pkgviews"
BUILD_VIEWS?= yes
.endif
# DEFAULT_VIEW.${PKGBASE} default view for ${PKGBASE}
# VIEWBASE base location of files at run-time
#
DEFAULT_VIEW.${PKGBASE}?= ${DEFAULT_VIEW}
.if ${PKG_INSTALLATION_TYPE} == "pkgviews"
. if empty(DEFAULT_VIEW.${PKGBASE}:M"")
VIEWBASE= ${LOCALBASE}/${DEFAULT_VIEW.${PKGBASE}}
. else
VIEWBASE= ${LOCALBASE}
. endif
.elif ${PKG_INSTALLATION_TYPE} == "overwrite"
VIEWBASE= ${PREFIX}
.endif
MAKE_ENV+= VIEWBASE=${VIEWBASE}
PKGVIEWS+= ${DEFAULT_VIEW.${PKGBASE}}
.PHONY: pre-install-fake-pkg
.if !target(pre-install-fake-pkg)
pre-install-fake-pkg:
${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${PRESERVE_FILE}
. if defined(PKG_PRESERVE)
${_PKG_SILENT}${_PKG_DEBUG}${DATE} > ${PRESERVE_FILE}
. endif
${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${BUILD_VERSION_FILE}
${_PKG_SILENT}${_PKG_DEBUG} \
files=""; \
for f in ${.CURDIR}/Makefile ${FILESDIR}/* ${PKGDIR}/*; do \
if [ -f "$$f" ]; then \
files="$$files \"$$f\""; \
fi; \
done; \
if [ -f ${DISTINFO_FILE} ]; then \
for f in `${AWK} 'NF == 4 && $$3 == "=" { gsub("[()]", "", $$2); print $$2 }' < ${DISTINFO_FILE}`; do \
if [ -f ${PATCHDIR}/$$f ]; then \
files="$$files \"${PATCHDIR}/$$f\""; \
fi; \
done; \
fi; \
if [ -d ${PATCHDIR} ]; then \
for f in ${PATCHDIR}/patch-*; do \
case $$f in \
*.orig|*.rej|*~) ;; \
${PATCHDIR}/patch-local-*) \
files="$$files \"$$f\"" ;; \
esac; \
done; \
fi; \
eval ${GREP} '\$$NetBSD' $$files | ${SED} -e 's|^${PKGSRCDIR}/||' > ${BUILD_VERSION_FILE}
${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${BUILD_INFO_FILE}
. for def in ${BUILD_DEFS}
@${ECHO} ${def}=${${def}:Q} | ${SED} -e 's|^PATH=[^ ]*|PATH=...|' >> ${BUILD_INFO_FILE}
. endfor
. if !empty(USE_LANGUAGES)
@${ECHO} "CC_VERSION=${CC_VERSION}" >> ${BUILD_INFO_FILE}
. endif
. if defined(USE_PERL5) && (${USE_PERL5} == "run")
@${ECHO} "PERL=`${PERL5} --version 2>/dev/null | ${GREP} 'This is perl'`" >> ${BUILD_INFO_FILE}
. endif
. ifdef _USE_GMAKE
@${ECHO} "GMAKE=`${GMAKE} --version | ${GREP} Make`" >> ${BUILD_INFO_FILE}
. endif
${_PKG_SILENT}${_PKG_DEBUG} \
${ECHO} "_PKGTOOLS_VER=${PKGTOOLS_VERSION}" >> ${BUILD_INFO_FILE}
.endif
.PHONY: post-install-fake-pkg
.if !target(post-install-fake-pkg)
post-install-fake-pkg: ${PLIST} ${DESCR} ${MESSAGE}
${_PKG_SILENT}${_PKG_DEBUG} \
if [ ! -f ${PLIST} -o ! -f ${DESCR} ]; then \
${ECHO} "** Missing package files for ${PKGNAME} - installation not recorded."; \
exit 1; \
fi
${_PKG_SILENT}${_PKG_DEBUG} \
if [ ! -d ${_PKG_DBDIR} ]; then \
${RM} -f ${_PKG_DBDIR}; \
${MKDIR} ${_PKG_DBDIR}; \
fi
. if defined(FORCE_PKG_REGISTER)
${_PKG_SILENT}${_PKG_DEBUG}${PKG_ADMIN} delete ${PKGNAME}
. endif
${_PKG_SILENT}${_PKG_DEBUG} \
${ECHO} ${COMMENT:Q} > ${PKG_DB_TMPDIR}/+COMMENT
${_PKG_SILENT}${_PKG_DEBUG} \
case "${DESCR}" in \
${PKG_DB_TMPDIR}/*|"") ;; \
*) if ${TEST} -f ${DESCR}; then \
${CP} ${DESCR} ${PKG_DB_TMPDIR}/+DESC; \
fi ;; \
esac
${_PKG_SILENT}${_PKG_DEBUG} \
case "${MESSAGE}" in \
${PKG_DB_TMPDIR}/*|"") ;; \
*) if ${TEST} -f ${MESSAGE}; then \
${CP} ${MESSAGE} ${PKG_DB_TMPDIR}/+DISPLAY; \
fi ;; \
esac
${_PKG_SILENT}${_PKG_DEBUG} \
case ${PKG_INSTALLATION_TYPE} in \
pkgview) ${TOUCH} ${PKG_DB_TMPDIR}/+VIEWS ;; \
esac
${_PKG_SILENT}${_PKG_DEBUG} \
case "${INSTALL_FILE}" in \
${PKG_DB_TMPDIR}/*|"") ;; \
*) if ${TEST} -f ${INSTALL_FILE}; then \
${CP} ${INSTALL_FILE} ${PKG_DB_TMPDIR}/+INSTALL; \
fi ;; \
esac
${_PKG_SILENT}${_PKG_DEBUG} \
case "${DEINSTALL_FILE}" in \
${PKG_DB_TMPDIR}/*|"") ;; \
*) if ${TEST} -f ${DEINSTALL_FILE}; then \
${CP} ${DEINSTALL_FILE} ${PKG_DB_TMPDIR}/+DEINSTALL; \
fi ;; \
esac
${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${SIZE_PKG_FILE} ${SIZE_ALL_FILE}
. if ${SHLIB_HANDLING} == "YES" && ${CHECK_SHLIBS} == "YES"
${_PKG_SILENT}${_PKG_DEBUG} \
case "${LDD}" in \
"") ldd=`${TYPE} ldd 2>/dev/null | ${AWK} '{ print $$NF }'`;; \
*) ldd="${LDD}"; \
esac; \
case "${OBJECT_FMT}" in \
ELF) bins=`${SETENV} PREFIX=${PREFIX} ${AWK} '/^(bin|sbin|libexec)\// { print ENVIRON["PREFIX"] "/" $$0 }' ${PLIST} || ${TRUE}`; \
libs=`${SETENV} PREFIX=${PREFIX} ${AWK} '/^lib\/lib.*\.so\.[0-9]+$$/ { print ENVIRON["PREFIX"] "/" $$0 }' ${PLIST} || ${TRUE}`; \
if ${TEST} "$$bins" != "" -o "$$libs" != ""; then \
requires=`($$ldd $$bins $$libs 2>/dev/null || ${TRUE}) | ${AWK} 'NF == 3 { print $$3 }' | ${SORT} -u`; \
fi; \
linklibs=`${SETENV} PREFIX=${PREFIX} ${AWK} '/^[^@].*\.so\.[0-9\.]+$$/ { print ENVIRON["PREFIX"] "/" $$0 }' ${PLIST} || ${TRUE}`; \
for i in $${linklibs}; do \
if ${TEST} -r $$i -a ! -x $$i -a ! -h $$i; then \
${TEST} "${PKG_DEVELOPER:Uno}" = "no" || \
${ECHO} "$$i: installed without execute permission; fixing (should use [BSD_]INSTALL_LIB)"; \
${CHMOD} +x $$i; \
fi; \
done; \
;; \
Mach-O) bins=`${SETENV} PREFIX=${PREFIX} ${AWK} '/^(bin|sbin|libexec)\// { print ENVIRON["PREFIX"] "/" $$0 }' ${PLIST} || ${TRUE}`; \
libs=`${SETENV} PREFIX=${PREFIX} ${AWK} '/^lib\/lib.*\.dylib/ { print ENVIRON["PREFIX"] "/" $$0 }' ${PLIST} || ${TRUE}`; \
if ${TEST} "$$bins" != "" -o "$$libs" != ""; then \
requires=`($$ldd $$bins $$libs 2>/dev/null || ${TRUE}) | ${AWK} '/compatibility version/ { print $$1 }' | ${SORT} -u`; \
fi; \
;; \
esac; \
for i in "" $$libs; do \
${TEST} "$$i" = "" && continue; \
${ECHO} "PROVIDES=$$i" >> ${BUILD_INFO_FILE}; \
done; \
for req in "" $$requires; do \
${TEST} "$$req" = "" && continue; \
${ECHO} "REQUIRES=$$req" >> ${BUILD_INFO_FILE}; \
done
. endif
${_PKG_SILENT}${_PKG_DEBUG} \
size_this=`${MAKE} ${MAKEFLAGS} print-pkg-size-this`; \
size_depends=`${MAKE} ${MAKEFLAGS} print-pkg-size-depends`; \
${ECHO} $$size_this >${SIZE_PKG_FILE}; \
${ECHO} $$size_this $$size_depends \
| ${AWK} '{ print $$1 + $$2; }' >${SIZE_ALL_FILE}
.endif
# Fake installation of package so that user can pkg_delete it later.
# Also, make sure that an installed package is recognized correctly in
# accordance to the @pkgdep directive in the packing lists.
#
.PHONY: register-pkg
.if !target(register-pkg)
register-pkg: post-install-fake-pkg
${_PKG_SILENT}${_PKG_DEBUG} \
doit=yes; \
case ${PKG_INSTALLATION_TYPE} in \
overwrite) if [ -d ${_PKG_DBDIR}/${PKGNAME} ]; then \
doit=no; \
fi ;; \
esac; \
case $$doit in \
yes) \
${ECHO_MSG} "${_PKGSRC_IN}> Registering installation for ${PKGNAME}"; \
${PKG_CREATE} ${PKG_ARGS_INSTALL} -O ${PKGFILE} > ${PKG_DB_TMPDIR}/+CONTENTS; \
list="`${MAKE} ${MAKEFLAGS} run-depends-list ECHO_MSG=${TRUE} | ${SORT} -u`" ; \
for realdep in `${ECHO} $$list | ${XARGS} -n 1 ${SETENV} ${PKG_BEST_EXISTS} | ${SORT} -u`; do \
if ${TEST} -z "$$realdep"; then \
${ECHO} "$$dep not installed - dependency NOT registered" ; \
elif [ -d ${_PKG_DBDIR}/$$realdep ]; then \
if ${TEST} ! -f ${_PKG_DBDIR}/$$realdep/+REQUIRED_BY; then \
${TOUCH} ${_PKG_DBDIR}/$$realdep/+REQUIRED_BY; \
fi; \
${AWK} 'BEGIN { found = 0; } \
$$0 == "${PKGNAME}" { found = 1; } \
{ print $$0; } \
END { if (!found) { printf("%s\n", "${PKGNAME}"); }}' \
< ${_PKG_DBDIR}/$$realdep/+REQUIRED_BY > ${_PKG_DBDIR}/$$realdep/reqby.$$$$; \
${MV} ${_PKG_DBDIR}/$$realdep/reqby.$$$$ ${_PKG_DBDIR}/$$realdep/+REQUIRED_BY; \
${ECHO} "${PKGNAME} requires installed package $$realdep"; \
fi; \
done; \
case ${PKG_INSTALLATION_TYPE} in \
overwrite) ${RM} -rf ${_PKG_DBDIR}/${PKGNAME} ;; \
esac; \
${MKDIR} ${_PKG_DBDIR}/${PKGNAME}; \
${CP} ${PKG_DB_TMPDIR}/+* ${_PKG_DBDIR}/${PKGNAME}; \
;; \
esac
. if (${PKG_INSTALLATION_TYPE} == "pkgviews") && \
!empty(BUILD_VIEWS:M[yY][eE][sS])
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} build-views
. endif # pkgviews
.endif
.PHONY: build-views
build-views: do-su-build-views
.PHONY: do-su-build-views
do-su-build-views:
@${ECHO_MSG} "${_PKGSRC_IN}> Building views for ${PKGNAME}"
${_PKG_SILENT}${_PKG_DEBUG} \
realtarget="real-su-build-views"; \
action="build-views"; \
${_SU_TARGET}
.PHONY: real-su-build-views
.if !target(real-su-build-views)
real-su-build-views:
. if (${PKG_INSTALLATION_TYPE} == "pkgviews") && defined(PKGVIEWS)
${_PKG_SILENT}${_PKG_DEBUG} \
${MKDIR} ${LOCALBASE}; \
for v in ${PKGVIEWS}; do \
case "$$v" in \
"") dbdir=${PKG_DBDIR}; viewname=standard ;; \
*) dbdir=${LOCALBASE}/$$v/.dbdir; viewname=$$v ;; \
esac; \
${ECHO} "=> Performing package view clash check for ${PKGNAME} in $$viewname view"; \
pkg=`${PKG_INFO_CMD} -K $$dbdir -e ${PKGBASE} || ${TRUE}`; \
case "$$pkg" in \
"") ;; \
*) ${ECHO} "*** ${PKGBASE} exists in $$viewname view - package $$pkg ***"; \
${ECHO} "*** Not hoisting ${PKGNAME} into $$viewname view"; \
continue ;; \
esac; \
${ECHO} "=> Performing package view overwrite check for ${PKGNAME} in $$viewname view"; \
dups=`${SETENV} PLIST_IGNORE_FILES="${_PLIST_IGNORE_FILES}" ${PKG_VIEW} --view=$$v check ${PKGNAME} || ${TRUE}`; \
case "$$dups" in \
"") ;; \
*) ${ECHO} "***********************************************************"; \
${ECHO} "**** The following symbolic links will be overwritten *****"; \
for f in $$dups; do \
${LS} -l ${LOCALBASE}/$$v/$$f; \
done; \
${ECHO} "***********************************************************"; \
;; \
esac; \
${ECHO} "=> Linking package into $$viewname view"; \
${SETENV} PLIST_IGNORE_FILES="${_PLIST_IGNORE_FILES}" ${PKG_VIEW} --view=$$v add ${PKGNAME}; \
done
. else
${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA}
. endif
.endif
.PHONY: remove-views
remove-views: do-su-remove-views
.PHONY: do-su-remove-views
do-su-remove-views:
@${ECHO_MSG} "${_PKGSRC_IN}> Removing ${PKGNAME} from views"
${_PKG_SILENT}${_PKG_DEBUG} \
realtarget="real-su-remove-views"; \
action="remove-views"; \
${_SU_TARGET}
.PHONY: real-su-remove-views
.if !target(real-su-remove-views)
real-su-remove-views:
. if (${PKG_INSTALLATION_TYPE} == "pkgviews") && defined(PKGVIEWS)
${_PKG_SILENT}${_PKG_DEBUG} \
for v in ${PKGVIEWS}; do \
case "$$v" in \
"") dbdir=${PKG_DBDIR}; viewname=standard ;; \
*) dbdir=${LOCALBASE}/$$v/.dbdir; viewname=$$v ;; \
esac; \
${ECHO} "=> Removing package from $$viewname view"; \
${SETENV} PLIST_IGNORE_FILES="${_PLIST_IGNORE_FILES}" ${PKG_VIEW} --view=$$v delete ${PKGNAME}; \
done
.else
${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA}
. endif
.endif
# Depend is generally meaningless for arbitrary packages, but if someone wants
# one they can override this. This is just to catch people who've gotten into
# the habit of typing `${MAKE} depend all install' as a matter of course.
#
.PHONY: depend
.if !target(depend)
depend:
.endif
# Same goes for tags
.PHONY: tags
.if !target(tags)
tags:
.endif
# if automatic manual page compression is done by the package according
# to MANZ's value, set MANCOMPRESSED if MANZ is set
.if defined(MANCOMPRESSED_IF_MANZ) && defined(MANZ)
MANCOMPRESSED= yes
MAKE_ENV+= MANZ="${MANZ}"
.endif
# generate ${PLIST} from ${PLIST_SRC} by:
# - substituting for PLIST_SUBST entries
# - fixing list of man-pages according to MANZ, MANINSTALL.
# - adding symlinks for shared libs (ELF) or ldconfig calls (a.out).
# plist awk pattern-action statement to handle MANINSTALL
_PLIST_AWK_MANINSTALL= \
{ \
if (!"${MANINSTALL:Mmaninstall}" && \
match($$0, "^([^/]*/)*man/([^/]*/)?man[1-9ln]") ) { \
next; \
} \
if (!"${MANINSTALL:Mcatinstall}" && \
match($$0, "^([^/]*/)*man/([^/]*/)?cat[1-9ln]") ) { \
next; \
} \
}
# plist awk pattern-action statement to strip '.gz' from man
# entries
_PLIST_AWK_STRIP_MANZ= \
/^([^\/]*\/)*man\/([^\/]*\/)?(man[1-9ln]\/.*[1-9ln]|cat[1-9ln]\/.*0)\.gz$$/ { \
$$0 = substr($$0, 1, length($$0) - 3); \
}
# plist awk pattern-action statement to add '.gz' to man entries
_PLIST_AWK_ADD_MANZ= \
/^([^\/]*\/)*man\/([^\/]*\/)?(man[1-9ln]\/.*[1-9ln]|cat[1-9ln]\/.*0)$$/ { \
$$0 = $$0 ".gz"; \
}
# plist awk pattern-action statement to handle PLIST_SUBST substitutions
# BEWARE: the awk script quote is closed and reopened around the
# string argument of gsub() calls so historic quoting semantic of
# PLIST_SUBST is preserved.
# XXX `_str_quote_{start,end}_' is a gross hack to work around weird word
# splitting.
_PLIST_AWK_SUBST= { ${PLIST_SUBST:S|=|\\}/,_str_quote_start_|:S|$|_str_quote_end_);|:S|^|gsub(/\\\$\\{|:S|_str_quote_start_|"'|g:S|_str_quote_end_|'"|g} }
# plist awk pattern-action statement to rewrite "imake installed" catman pages
# as plain manpages.
_PLIST_AWK_IMAKE_MAN= \
/^([^\/]*\/)*man\/([^\/]*\/)?cat[1-9ln]\/.*0$$/ { \
n = match($$0, "/cat[1-9ln]"); \
sect = sprintf(".%s", substr($$0, n + 4, 1)); \
sub("/cat", "/man"); \
sub("\\.0$$", sect); \
}
# plist awk pattern-action statement to handle info files:
# generate list of files matching
# ${PREFIX}/${INFO_DIR}/filename(-[0-9]+)?(.gz)?
# for `filename' being each word of INFO_FILES in turn.
# Notes:
# - first the filenames matching ${PREFIX}/${INFO_DIR}/filename*
# are generated with ls then they are filtered by the exact pattern.
# - ${PREFIX}/${INFO_DIR}/filename is single quoted and single quote
# escaped
# XXX When all info file entries will be removed from PLIST files
# the non-BEGIN pattern-action statements generated below will be retired.
_PLIST_AWK_INFO=
.if ${PLIST_TYPE} == "static"
. if !empty(INFO_FILES)
. for _f_ in ${INFO_FILES}
_PLIST_AWK_INFO+= \
BEGIN { \
cmd="${_f_}"; gsub("'\''", "\\'\''", cmd); \
sub("^", "${LS} '\''${PREFIX}/${INFO_DIR}/", cmd); \
sub("$$", "'\''*", cmd); \
while ((cmd | getline l) > 0) { \
if (match(l, ".*/${_f_:S|+|\\\+|g}(-[0-9]+)?(\\.gz)?$$")) { \
sub("^${PREFIX}/", "", l); \
print l; \
} \
} \
close(cmd); \
} \
/^${INFO_DIR:S|/|\\/|g}\/${_f_}(-[0-9]+)?$$/ { next; }
. endfor
. endif
.endif
# plist awk pattern-action statement to expand libtool archives into
# shared and/or static libraries.
#
.if ${PLIST_TYPE} == "dynamic"
_PLIST_AWK_LIBTOOL?= # empty
.elif empty(LIBTOOLIZE_PLIST:M[yY][eE][sS])
BROKEN+= "USE_LIBTOOL requires LIBTOOLIZE_PLIST=yes for proper PLIST generation"
.else
_PLIST_AWK_LIBTOOL?= \
/^[^@].*\.la$$/ { \
system("cd ${PREFIX} && ${_PRINT_LA_LIBNAMES} " $$0) \
}
.endif
# _PLIST_AWK_SCRIPT hold the complete awk script for plist target.
#
_PLIST_AWK_SCRIPT= '
# Do the substitutions
# See comments above about _PLIST_AWK_SUBST: it contains single quotes!
# So _PLIST_AWK_SCRIPT is intended to be single quoted.
_PLIST_AWK_SCRIPT+= ${_PLIST_AWK_SUBST}
# Generated entries for info files
.if !empty(INFO_FILES)
_PLIST_AWK_SCRIPT+= ${_PLIST_AWK_INFO}
.endif
# Expand libtool archives
_PLIST_AWK_SCRIPT+= ${_PLIST_AWK_LIBTOOL}
# Strip the '.gz' suffixes on man entries
_PLIST_AWK_SCRIPT+= ${_PLIST_AWK_STRIP_MANZ}
# Deal with MANINSTALL and man entries
_PLIST_AWK_SCRIPT+= ${_PLIST_AWK_MANINSTALL}
# Deal with "imake installed" catman pages
.if defined(USE_IMAKE) && ${_PREFORMATTED_MAN_DIR} == "man"
_PLIST_AWK_SCRIPT+= ${_PLIST_AWK_IMAKE_MAN}
.endif
# Add '.gz' suffixes on man entries if needed
.if defined(MANZ)
_PLIST_AWK_SCRIPT+= ${_PLIST_AWK_ADD_MANZ}
.endif
# Print the entry
_PLIST_AWK_SCRIPT+= { print $$0; }
#
_PLIST_AWK_SCRIPT+= '
# GENERATE_PLIST is a sequence of commands, terminating in a semicolon,
# that outputs contents for a PLIST to stdout and is appended to
# the contents of ${PLIST_SRC}.
#
GENERATE_PLIST?= ${TRUE};
.if ${PLIST_TYPE} == "dynamic"
_PLIST_IGNORE_CMD= \
( while read i; do \
ignore=no; \
for p in ${_PLIST_IGNORE_FILES}; do \
case "$$i" in \
$$p) ignore=yes; break ;; \
esac; \
done; \
[ "$$ignore" = "yes" ] || ${ECHO} "$$i"; \
done )
_GENERATE_PLIST= \
${FIND} ${PREFIX} \! -type d -print | ${SORT} | \
${SED} -e "s|^${PREFIX}/||" | \
${_PLIST_IGNORE_CMD}; \
${FIND} ${PREFIX} -type d -print | ${SORT} -r | \
${GREP} -v "^${PREFIX}$$" | \
${_PLIST_IGNORE_CMD} | \
${SED} -e "s|^${PREFIX}/|@unexec ${RMDIR} -p %D/|" \
-e "s,$$, 2>/dev/null || ${TRUE},";
.else
_GENERATE_PLIST= ${CAT} ${PLIST_SRC}; ${GENERATE_PLIST}
.endif
.PHONY: plist
plist: ${PLIST}
.if ${PLIST_TYPE} == "static"
${PLIST}: ${PLIST_SRC}
.endif
${PLIST}:
${_PKG_SILENT}${_PKG_DEBUG} \
{ ${_GENERATE_PLIST} } | ${AWK} ${_PLIST_AWK_SCRIPT} \
> ${PLIST}; \
${MAKE} ${MAKEFLAGS} do-shlib-handling \
SHLIB_PLIST_MODE=1
# generate ${MESSAGE} from ${MESSAGE_SRC} by substituting
# for MESSAGE_SUBST entries
.PHONY: message
message: ${MESSAGE}
.ifdef MESSAGE
${MESSAGE}: ${MESSAGE_SRC}
${_PKG_SILENT}${_PKG_DEBUG} \
if [ -z "${MESSAGE_SRC}" ]; then \
${ECHO} "${MESSAGE_SRC} not found."; \
${ECHO} "Please set MESSAGE_SRC correctly."; \
else \
${CAT} ${MESSAGE_SRC} | \
${SED} ${MESSAGE_SUBST_SED} \
> ${MESSAGE}; \
fi
.endif
# generate ${DESCR} from ${DESCR_SRC} by:
# - Appending the homepage URL, if any
.PHONY: descr
descr: ${DESCR}
${DESCR}: ${DESCR_SRC}
@${CAT} ${DESCR_SRC} >${DESCR}
.if defined(HOMEPAGE)
@\
${ECHO} >>${DESCR} ; \
${ECHO} "Homepage:" >>${DESCR} ; \
${ECHO} '${HOMEPAGE}' >>${DESCR}
.endif
.include "../../mk/subst.mk"
#
# For bulk build targets (bulk-install, bulk-package), the
# BATCH variable must be set in /etc/mk.conf:
#
.if defined(BATCH)
. include "../../mk/bulk/bsd.bulk-pkg.mk"
.endif
# Create a PKG_ERROR_HANDLER shell command for each class listed in
# PKG_ERROR_CLASSES. The error handler is meant to be invoked within
# a make target.
#
.for _class_ in ${PKG_ERROR_CLASSES}
PKG_ERROR_HANDLER.${_class_}?= { \
ec=$$?; \
for str in ${PKG_ERROR_MSG.${_class_}}; do \
${ECHO} "${_PKGSRC_IN}> $$str"; \
done; \
exit $$ec; \
}
.endfor