# $NetBSD: bsd.pkg.mk,v 1.1414 2004/02/28 07:12:21 jdolecek Exp $
#
# This file is in the public domain.
#
# This file is derived from bsd.port.mk - 940820 Jordan K. Hubbard.
#
# Please see the NetBSD packages(7) manual page for details on the
# that variables used in this make file template.
# Default sequence for "all" is: fetch checksum extract patch configure build
#
# Please read the comments in the targets section below, you
# should be able to use the pre-* or post-* targets/scripts
# (which are available for every stage except checksum) or
# override the do-* targets to do pretty much anything you want.
#
# NEVER override the "regular" targets unless you want to open
# a major can of worms.
##### Include any preferences, if not already included, and common definitions
.include "../../mk/bsd.prefs.mk"
##### Prevent /etc/mk.conf from being included by a distribution's BSD-style
##### Makefiles. We really don't want to pick up settings that are used by
##### builds in /usr/src, e.g. DESTDIR.
.if defined(PKGMAKECONF)
MAKE_ENV+= MAKECONF=${PKGMAKECONF}
.else
MAKE_ENV+= MAKECONF=/dev/null
.endif
##### Pass information about desired toolchain to package build.
.if defined(USETOOLS)
MAKE_ENV+= USETOOLS="${USETOOLS}"
.endif
# This has to come first to avoid showing all BUILD_DEFS added by this
# Makefile, which are usually not customizable.
.PHONY: pre-extract build-defs-message
pre-extract: build-defs-message
.if ${PKGSRC_SHOW_BUILD_DEFS} != "YES" && ${PKGSRC_SHOW_BUILD_DEFS} != "yes"
build-defs-message:
.elif !target(build-defs-message)
build-defs-message: ${WRKDIR}
. if defined(BUILD_DEFS) && !empty(BUILD_DEFS)
. if !exists(${WRKDIR}/.bdm_done)
@${ECHO} "=========================================================================="
@${ECHO} "The following variables will affect the build process of this package,"
@${ECHO} "${PKGNAME}. Their current value is shown below:"
@${ECHO} ""
. for var in ${BUILD_DEFS:O}
. if !defined(${var})
@${ECHO} " * ${var} (not defined)"
. elif defined(${var}) && empty(${var})
@${ECHO} " * ${var} (defined)"
. else
@${ECHO} " * ${var} = ${${var}}"
. endif
. endfor
@${ECHO} ""
@${ECHO} "You may want to abort the process now with CTRL+C and change their value"
@${ECHO} "before continuing. Be sure to run \`${MAKE} clean' after the changes."
@${ECHO} "=========================================================================="
@${TOUCH} ${WRKDIR}/.bdm_done
. endif
. endif
.endif
# Fail-safe in the case of circular dependencies
.if defined(_PKGSRC_DEPS) && defined(PKGNAME) && !empty(_PKGSRC_DEPS:M${PKGNAME})
PKG_FAIL_REASON+="Circular dependency detected"
.endif
##### Some NetBSD platforms permitted the user to set the binary format while
##### they were in the process of transitioning to ELF. Packages with BSD-style
##### make systems need this setting to be passed in.
.if defined(OBJECT_FMT)
MAKE_ENV+= OBJECT_FMT="${OBJECT_FMT}"
.endif
# Allow variables to be set on a per-OS basis
OPSYSVARS+= CFLAGS CPPFLAGS LDFLAGS LIBS
.for _var_ in ${OPSYSVARS:O}
. if defined(${_var_}.${OPSYS})
${_var_}+= ${${_var_}.${OPSYS}}
. elif defined(${_var_}.*)
${_var_}+= ${${_var_}.*}
. endif
.endfor
##### Build crypto packages by default.
MKCRYPTO?= yes
CLEANDEPENDS?= NO
DEINSTALLDEPENDS?= NO # add -R to pkg_delete
REINSTALL?= NO # reinstall upon update
CHECK_SHLIBS?= YES # run check-shlibs after install
SHLIB_HANDLING?= YES # do automatic shared lib handling
NOCLEAN?= NO # don't clean up after update
PKGBASE?= ${PKGNAME:C/-[^-]*$//}
PKGVERSION?= ${PKGNAME:C/^.*-//}
PKGWILDCARD?= ${PKGBASE}-[0-9]*
_DISTDIR?= ${DISTDIR}/${DIST_SUBDIR}
INTERACTIVE_STAGE?= none
# PKG_INSTALLATION_TYPE can only be one of two values: "pkgviews" or
# "overwrite".
#
.if (${PKG_INSTALLATION_TYPE} != "pkgviews") && \
(${PKG_INSTALLATION_TYPE} != "overwrite")
PKG_FAIL_REASON+= "PKG_INSTALLATION_TYPE must be \`\`pkgviews'' or \`\`overwrite''."
.endif
.if empty(PKG_INSTALLATION_TYPES:M${PKG_INSTALLATION_TYPE})
PKG_FAIL_REASON+= "This package doesn't support PKG_INSTALLATION_TYPE=${PKG_INSTALLATION_TYPE}."
.endif
# The style of PLISTs that are used by the installed package.
# Possible: dynamic, static
#
.if ${PKG_INSTALLATION_TYPE} == "pkgviews"
PLIST_TYPE?= dynamic
.elif ${PKG_INSTALLATION_TYPE} == "overwrite"
PLIST_TYPE?= static
.else
PLIST_TYPE?= static
.endif
# PLIST_TYPE can only be one of two values: "dynamic" or "static". If we
# don't explicitly ask for "static", assume "dynamic".
#
.if (${PLIST_TYPE} != "dynamic") && (${PLIST_TYPE} != "static")
PKG_FAIL_REASON+= "PLIST_TYPE must be \`\`dynamic'' or \`\`static''."
.endif
.if (${PKG_INSTALLATION_TYPE} == "overwrite") && (${PLIST_TYPE} != "static")
PKG_FAIL_REASON+= "PLIST_TYPE must be \`\`static'' for \`\`overwrite'' packages."
.endif
.if empty(USE_BUILDLINK2:M[nN][oO]) && empty(USE_BUILDLINK3:M[nN][oO])
PKG_FAIL_REASON+= "Please undefine USE_BUILDLINK2 or USE_BUILDLINK3."
.endif
.if !empty(USE_BUILDLINK3:M[nN][oO])
#
# Set the default BUILDLINK_DIR, BUILDLINK_X11_DIR so that if no
# buildlink2.mk files are included, then they still point to where headers
# and libraries for installed packages and X11R6 may be found.
#
BUILDLINK_DIR?= ${LOCALBASE}
BUILDLINK_X11_DIR?= ${X11BASE}
.endif
.if defined(USE_IMAKE)
USE_X11BASE?= implied
PLIST_SUBST+= IMAKE_MAN_SOURCE_PATH=${IMAKE_MAN_SOURCE_PATH} \
IMAKE_MAN_DIR=${IMAKE_MAN_DIR} \
IMAKE_LIBMAN_DIR=${IMAKE_LIBMAN_DIR} \
IMAKE_KERNMAN_DIR=${IMAKE_KERNMAN_DIR} \
IMAKE_FILEMAN_DIR=${IMAKE_FILEMAN_DIR} \
IMAKE_MISCMAN_DIR=${IMAKE_MISCMAN_DIR} \
IMAKE_MAN_SUFFIX=${IMAKE_MAN_SUFFIX} \
IMAKE_LIBMAN_SUFFIX=${IMAKE_LIBMAN_SUFFIX} \
IMAKE_KERNMAN_SUFFIX=${IMAKE_KERNMAN_SUFFIX} \
IMAKE_FILEMAN_SUFFIX=${IMAKE_FILEMAN_SUFFIX} \
IMAKE_MISCMAN_SUFFIX=${IMAKE_MISCMAN_SUFFIX} \
IMAKE_MANNEWSUFFIX=${IMAKE_MANNEWSUFFIX}
.endif
.if defined(USE_X11BASE)
USE_X11?= implied
.endif
# Set the PREFIX appropriately.
.if ${PKG_INSTALLATION_TYPE} == "overwrite"
. if defined(USE_X11BASE)
PREFIX= ${X11PREFIX}
. elif defined(USE_CROSSBASE)
PREFIX= ${CROSSBASE}
NO_MTREE= yes
. else
PREFIX= ${LOCALBASE}
. endif
.elif ${PKG_INSTALLATION_TYPE} == "pkgviews"
PREFIX= ${DEPOTBASE}/${PKGNAME}
NO_MTREE= yes
.endif
# If USE_XPKGWEDGE is set, then add a build dependency on xpkgwedge for
# X11 packages.
#
.if defined(USE_X11BASE)
. if !empty(USE_XPKGWEDGE:M[yY][eE][sS])
BUILD_DEPENDS+= xpkgwedge>=${_XPKGWEDGE_REQD}:../../pkgtools/xpkgwedge
. endif
.endif
.if empty(DEPOT_SUBDIR)
PKG_FAIL_REASON+= "DEPOT_SUBDIR may not be empty."
.endif
.if ${PKG_INSTALLATION_TYPE} == "pkgviews"
#
# _PLIST_IGNORE_FILES basically mirrors the list of ignored files found
# in pkg_views(1). It's used by the dynamic PLIST generator to skip
# adding the named files to the PLIST.
#
_PLIST_IGNORE_FILES= +* # package metadata files
_PLIST_IGNORE_FILES+= info/dir
.if defined(INFO_DIR) && empty(INFO_DIR:Minfo)
_PLIST_IGNORE_FILES+= ${INFO_DIR}/dir
.endif
_PLIST_IGNORE_FILES+= *[~\#] *.OLD *.orig *,v # scratch config files
_PLIST_IGNORE_FILES+= ${PLIST_IGNORE_FILES}
.endif
BUILD_DEFS+= _PLIST_IGNORE_FILES
# We need to make sure the buildlink-x11 package is not installed since it
# breaks builds that use imake.
#
.if defined(USE_IMAKE)
. if exists(${LOCALBASE}/lib/X11/config/buildlinkX11.def) || \
exists(${X11BASE}/lib/X11/config/buildlinkX11.def)
PKG_FAIL_REASON+= "${PKGNAME} uses imake, but the buildlink-x11 package was found." \
" Please deinstall it (pkg_delete buildlink-x11)."
. endif
.endif # USE_IMAKE
.if defined(USE_GNU_TOOLS) && !empty(USE_GNU_TOOLS:Mmake)
_USE_GMAKE= yes
.endif
.if defined(_USE_GMAKE)
MAKE_PROGRAM= ${GMAKE}
.elif defined(USE_IMAKE)
MAKE_PROGRAM= ${_IMAKE_MAKE}
.else
MAKE_PROGRAM= ${MAKE}
.endif
CONFIGURE_ENV+= MAKE="${MAKE_PROGRAM:T}"
.if defined(PKG_USE_KERBEROS)
CRYPTO?= uses Kerberos encryption code
BUILD_DEFS+= KERBEROS
.endif
# Distill the PERL5_REQD list into a single _PERL5_REQD value that is the
# highest version of Perl required.
#
PERL5_REQD+= 5.0
PERL5_REQD+= ${_OPSYS_PERL_REQD}
_PERL5_STRICTEST_REQD?= none
.for _version_ in ${PERL5_REQD}
. for _pkg_ in perl-${_version_}
. if ${_PERL5_STRICTEST_REQD} == "none"
_PERL5_PKG_SATISFIES_DEP= YES
. for _vers_ in ${PERL5_REQD}
. if !empty(_PERL5_PKG_SATISFIES_DEP:M[yY][eE][sS])
_PERL5_PKG_SATISFIES_DEP!= \
if ${PKG_ADMIN} pmatch 'perl>=${_vers_}' ${_pkg_}; then \
${ECHO} "YES"; \
else \
${ECHO} "NO"; \
fi
. endif
. endfor
. if !empty(_PERL5_PKG_SATISFIES_DEP:M[yY][eE][sS])
_PERL5_STRICTEST_REQD= ${_version_}
. endif
. endif
. endfor
.endfor
_PERL5_REQD= ${_PERL5_STRICTEST_REQD}
# _PERL58_PATTERNS contains perl versions >=5.8.0 but before 6.0.
_PERL58_PATTERNS= 5.8* 5.9* 5.[1-9][0-9]*
_NEED_PERL58?= no
.for _pattern_ in ${_PERL58_PATTERNS}
. if !empty(_PERL5_REQD:M${_pattern_})
_NEED_PERL58= yes
. endif
.endfor
.if !empty(_NEED_PERL58:M[yY][eE][sS])
PERL5_PKGSRCDIR?= ../../lang/perl58
.else
PERL5_PKGSRCDIR?= ../../lang/perl5
.endif
# Convert USE_PERL5 to be two-valued: either "build" or "run" to denote
# whether we want a build-time or run-time dependency on perl.
#
.if defined(USE_PERL5)
. if (${USE_PERL5} == "build")
_PERL5_DEPMETHOD= BUILD_DEPENDS
. else
USE_PERL5:= run
_PERL5_DEPMETHOD= DEPENDS
. endif
_PERL5_DEPENDS= perl>=${_PERL5_REQD}
. if !defined(BUILDLINK_DEPENDS.perl)
${_PERL5_DEPMETHOD}+= ${_PERL5_DEPENDS}:${PERL5_PKGSRCDIR}
. endif
.endif
.if defined(USE_PERL5) && (${USE_PERL5} == "run")
. if !defined(PERL5_SITELIB) || !defined(PERL5_SITEARCH) || !defined(PERL5_ARCHLIB)
. if exists(${PERL5})
. if exists(${LOCALBASE}/share/mk/bsd.perl.mk)
. include "${LOCALBASE}/share/mk/bsd.perl.mk"
. else
PERL5_SITELIB!= eval `${PERL5} -V:installsitelib 2>/dev/null`; \
${ECHO} $${installsitelib}
PERL5_SITEARCH!= eval `${PERL5} -V:installsitearch 2>/dev/null`; \
${ECHO} $${installsitearch}
PERL5_ARCHLIB!= eval `${PERL5} -V:installarchlib 2>/dev/null`; \
${ECHO} $${installarchlib}
. endif # !exists(bsd.perl.mk)
. if ${PKG_INSTALLATION_TYPE} == "overwrite"
_PERL5_PREFIX!= eval `${PERL5} -V:prefix 2>/dev/null`; \
${ECHO} $${prefix}
PERL5_SITELIB:= ${PERL5_SITELIB:S/^${_PERL5_PREFIX}/${LOCALBASE}/}
PERL5_SITEARCH:= ${PERL5_SITEARCH:S/^${_PERL5_PREFIX}/${LOCALBASE}/}
PERL5_ARCHLIB:= ${PERL5_ARCHLIB:S/^${_PERL5_PREFIX}/${LOCALBASE}/}
MAKEFLAGS+= PERL5_SITELIB=${PERL5_SITELIB:Q}
MAKEFLAGS+= PERL5_SITEARCH=${PERL5_SITEARCH:Q}
MAKEFLAGS+= PERL5_ARCHLIB=${PERL5_ARCHLIB:Q}
. endif # PKG_INSTALLATION_TYPE == "overwrite"
. endif # exists($PERL5)
. endif # !defined(PERL5_*)
.endif # USE_PERL5 == run
.if defined(USE_FORTRAN)
. if !exists(/usr/bin/f77)
PKG_FC?= f2c-f77
. endif
# it is anticipated that once /usr/bin/f77 is more stable that the following
# default will be changed to f77. However, in the case where there is no
# /usr/bin/f77, the default will remain as f2c-f77.
.for __tmp__ in 1.[5-9]* [2-9].*
. if ${MACHINE_PLATFORM:MNetBSD-${__tmp__}-*} != ""
PKG_FC?= f77
. endif # MACHINE_PLATFORM
.endfor # __tmp__
PKG_FC?= f2c-f77
. if (${PKG_FC} == "f2c-f77")
# this is a DEPENDS not BUILD_DEPENDS because of the
# shared Fortran libs
. if empty(USE_BUILDLINK2:M[nN][oO])
. include "../../lang/f2c/buildlink2.mk"
. else
DEPENDS+= f2c>=20001205nb3:../../lang/f2c
. endif
. endif
FC= ${PKG_FC}
F77= ${PKG_FC}
CONFIGURE_ENV+= F77="${F77}"
CONFIGURE_ENV+= FFLAGS="${FFLAGS:M*}"
MAKE_ENV+= F77="${F77}"
MAKE_ENV+= FC="${FC}"
.endif
# Automatically increase process limit where necessary for building.
_ULIMIT_CMD=
.if defined(UNLIMIT_RESOURCES)
. for __tmp__ in ${UNLIMIT_RESOURCES}
. if defined(ULIMIT_CMD_${__tmp__})
_ULIMIT_CMD+= ${ULIMIT_CMD_${__tmp__}} ;
. endif
. endfor
.endif
CPPFLAGS+= ${CPP_PRECOMP_FLAGS}
# If GNU_CONFIGURE is defined, then pass LIBS to the GNU configure script.
# also pass in a CONFIG_SHELL to avoid picking up bash
.if defined(GNU_CONFIGURE)
CONFIGURE_ENV+= LIBS="${LIBS}"
CONFIG_SHELL?= ${SH}
CONFIGURE_ENV+= CONFIG_SHELL=${CONFIG_SHELL}
.endif
.if defined(_OPSYS_LIBTOOL_REQD)
LIBTOOL_REQD= ${_OPSYS_LIBTOOL_REQD}
.else
LIBTOOL_REQD?= 1.4.20010614nb11
.endif
#
# PKG_LIBTOOL is the path to the libtool script installed by libtool-base.
# _LIBTOOL is the path the libtool used by the build, which could be the
# path to a libtool wrapper script.
# LIBTOOL is the publicly-readable variable that should be used by
# Makefiles to invoke the proper libtool.
#
PKG_LIBTOOL?= ${LOCALBASE}/bin/libtool
PKG_SHLIBTOOL?= ${LOCALBASE}/bin/shlibtool
_LIBTOOL?= ${PKG_LIBTOOL}
_SHLIBTOOL?= ${PKG_SHLIBTOOL}
LIBTOOL?= ${PKG_LIBTOOL}
SHLIBTOOL?= ${PKG_SHLIBTOOL}
.if defined(USE_LIBTOOL)
BUILD_DEPENDS+= libtool-base>=${LIBTOOL_REQD}:../../devel/libtool-base
CONFIGURE_ENV+= LIBTOOL="${LIBTOOL} ${LIBTOOL_FLAGS}"
MAKE_ENV+= LIBTOOL="${LIBTOOL} ${LIBTOOL_FLAGS}"
LIBTOOL_OVERRIDE?= libtool */libtool */*/libtool
.endif
.if defined(BUILD_USES_MSGFMT) && \
(!exists(/usr/bin/msgfmt) || ${_USE_GNU_GETTEXT} == "yes")
BUILD_DEPENDS+= gettext>=0.10.35nb1:../../devel/gettext
.endif
.if defined(RECOMMENDED)
. if !empty(IGNORE_RECOMMENDED:M[nN][oO])
DEPENDS+= ${RECOMMENDED}
. else
BUILD_DEFS+= IGNORE_RECOMMENDED
. endif
.endif
EXTRACT_COOKIE= ${WRKDIR}/.extract_done
BUILDLINK_COOKIE= ${WRKDIR}/.buildlink_done
CONFIGURE_COOKIE= ${WRKDIR}/.configure_done
INSTALL_COOKIE= ${WRKDIR}/.install_done
TEST_COOKIE= ${WRKDIR}/.test_done
BUILD_COOKIE= ${WRKDIR}/.build_done
PATCH_COOKIE= ${WRKDIR}/.patch_done
TOOLS_COOKIE= ${WRKDIR}/.tools_done
PACKAGE_COOKIE= ${WRKDIR}/.package_done
INTERACTIVE_COOKIE= .interactive_stage
NULL_COOKIE= ${WRKDIR}/.null
# New message digest defs
DIGEST_ALGORITHM?= SHA1
# Miscellaneous overridable commands:
SHCOMMENT?= ${ECHO_MSG} >/dev/null '***'
DISTINFO_FILE?= ${.CURDIR}/distinfo
.if defined(USE_X11)
X11_LDFLAGS+= -Wl,${RPATH_FLAG}${X11BASE}/lib
X11_LDFLAGS+= -L${X11BASE}/lib
.endif
.if !empty(USE_BUILDLINK2:M[nN][oO]) && !empty(USE_BUILDLINK3:M[nN][oO])
LDFLAGS+= -Wl,${RPATH_FLAG}${LOCALBASE}/lib
LDFLAGS+= -L${LOCALBASE}/lib
. if defined(USE_X11)
LDFLAGS+= ${X11_LDFLAGS}
. endif
.endif
MAKE_ENV+= LDFLAGS="${LDFLAGS}"
MAKE_ENV+= RPATH_FLAG="${RPATH_FLAG}"
MAKE_ENV+= WHOLE_ARCHIVE_FLAG="${WHOLE_ARCHIVE_FLAG}"
MAKE_ENV+= NO_WHOLE_ARCHIVE_FLAG="${NO_WHOLE_ARCHIVE_FLAG}"
MAKE_ENV+= LINK_ALL_LIBGCC_HACK="${LINK_ALL_LIBGCC_HACK}"
CONFIGURE_ENV+= LDFLAGS="${LDFLAGS:M*}" M4="${M4}" YACC="${YACC}"
CONFIGURE_ENV+= RPATH_FLAG="${RPATH_FLAG}"
MAKE_FLAGS?=
MAKEFILE?= Makefile
MAKE_ENV+= PATH=${PATH}:${LOCALBASE}/bin:${X11BASE}/bin
MAKE_ENV+= PREFIX=${PREFIX} LOCALBASE=${LOCALBASE}
MAKE_ENV+= X11BASE=${X11BASE} CFLAGS="${CFLAGS}"
MAKE_ENV+= CPPFLAGS="${CPPFLAGS}" FFLAGS="${FFLAGS}"
MAKE_ENV+= X11PREFIX=${X11PREFIX}
.if defined(CC)
MAKE_ENV+= CC="${CC}"
.endif
.if defined(CXX)
MAKE_ENV+= CXX="${CXX}"
.endif
.if defined(CPP) && !defined(NO_EXPORT_CPP)
MAKE_ENV+= CPP="${CPP}"
.endif
# export the flags needed to compile and link pthreaded code
MAKE_ENV+= PTHREAD_CFLAGS="${PTHREAD_CFLAGS}"
MAKE_ENV+= PTHREAD_LDFLAGS="${PTHREAD_LDFLAGS}"
.if exists(${LOCALBASE}/bin/ftp)
FETCH_CMD?= ${LOCALBASE}/bin/ftp
.else
FETCH_CMD?= /usr/bin/ftp
.endif
TOUCH_FLAGS?= -f
# determine if we need GNU patch from pkgsrc.
_NEED_PATCH!= if [ -d ${PATCHDIR} ]; then \
if [ "`${ECHO} ${PATCHDIR}/patch-*`" != "${PATCHDIR}/patch-*" ]; then \
${ECHO} YES; \
else \
${ECHO} NO; \
fi \
else \
${ECHO} NO; \
fi
.if defined(PATCHFILES)
_NEED_PATCH= YES
.endif
.if ${_NEED_PATCH} == "YES"
USE_GNU_TOOLS+= patch
.endif
PATCH_STRIP?= -p0
PATCH_DIST_STRIP?= -p0
.if defined(PATCH_DEBUG) || defined(PKG_VERBOSE)
PATCH_DEBUG_TMP= yes
PATCH_ARGS?= -d ${WRKSRC} -E ${PATCH_STRIP}
PATCH_DIST_ARGS?= -d ${WRKSRC} -E ${PATCH_DIST_STRIP}
.else
PATCH_DEBUG_TMP= no
PATCH_ARGS?= -d ${WRKSRC} --forward --quiet -E ${PATCH_STRIP}
PATCH_DIST_ARGS?= -d ${WRKSRC} --forward --quiet -E ${PATCH_DIST_STRIP}
.endif
.if defined(BATCH)
PATCH_ARGS+= --batch
PATCH_DIST_ARGS+= --batch
.endif
.if defined(_PATCH_CAN_BACKUP) && ${_PATCH_CAN_BACKUP} == "yes"
PATCH_ARGS+= ${_PATCH_BACKUP_ARG} .orig
PATCH_DIST_ARGS+= ${_PATCH_BACKUP_ARG} .orig_dist
.endif
PATCH_FUZZ_FACTOR?= -F0 # Default to zero fuzz
EXTRACT_SUFX?= .tar.gz
# We need bzip2 for PATCHFILES with .bz2 suffix.
.if defined(PATCHFILES)
. if ${PATCHFILES:E} == "bz2" && ${EXTRACT_SUFX} != ".tar.bz2"
. if exists(/usr/bin/bzcat)
BZCAT= /usr/bin/bzcat
. else
BZCAT= ${LOCALBASE}/bin/bzcat
BUILD_DEPENDS+= bzip2>=0.9.0b:../../archivers/bzip2
. endif # !exists bzcat
. endif
.endif # defined(PATCHFILES)
# Figure out where the local mtree file is
.if !defined(MTREE_FILE)
. if defined(USE_X11BASE)
MTREE_FILE= ${_PKGSRCDIR}/mk/${OPSYS}.x11.dist
. else
MTREE_FILE= ${_PKGSRCDIR}/mk/${OPSYS}.pkg.dist
. endif
.endif # ! MTREE_FILE
MTREE_ARGS?= -U -f ${MTREE_FILE} -d -e -p
# Debugging levels for this file, dependent on PKG_DEBUG_LEVEL definition
# 0 == normal, default, quiet operation
# 1 == all shell commands echoed before invocation
# 2 == shell "set -x" operation
PKG_DEBUG_LEVEL?= 0
_PKG_SILENT= @
_PKG_DEBUG= # empty
_PKG_DEBUG_SCRIPT= # empty
.if ${PKG_DEBUG_LEVEL} > 0
_PKG_SILENT= # empty
.endif
.if ${PKG_DEBUG_LEVEL} > 1
_PKG_DEBUG= set -x;
_PKG_DEBUG_SCRIPT= ${SH} -x
.endif
WRKSRC?= ${WRKDIR}/${DISTNAME}
.if defined(NO_WRKSUBDIR)
PKG_FAIL_REASON+='NO_WRKSUBDIR has been deprecated - please replace it with an explicit'
PKG_FAIL_REASON+='assignment of WRKSRC= $${WRKDIR}'
.endif # NO_WRKSUBDIR
# A few aliases for *-install targets
PKGDIRMODE?= 755
INSTALL_PROGRAM?= \
${INSTALL} ${COPY} ${_STRIPFLAG_INSTALL} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
INSTALL_SCRIPT?= \
${INSTALL} ${COPY} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
INSTALL_DATA?= \
${INSTALL} ${COPY} -o ${SHAREOWN} -g ${SHAREGRP} -m ${SHAREMODE}
INSTALL_MAN?= \
${INSTALL} ${COPY} -o ${MANOWN} -g ${MANGRP} -m ${MANMODE}
INSTALL_PROGRAM_DIR?= \
${INSTALL} -d -o ${BINOWN} -g ${BINGRP} -m ${PKGDIRMODE}
INSTALL_SCRIPT_DIR?= \
${INSTALL_PROGRAM_DIR}
INSTALL_DATA_DIR?= \
${INSTALL} -d -o ${SHAREOWN} -g ${SHAREGRP} -m ${PKGDIRMODE}
INSTALL_MAN_DIR?= \
${INSTALL} -d -o ${MANOWN} -g ${MANGRP} -m ${PKGDIRMODE}
INSTALL_MACROS= BSD_INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
BSD_INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
BSD_INSTALL_DATA="${INSTALL_DATA}" \
BSD_INSTALL_MAN="${INSTALL_MAN}" \
BSD_INSTALL="${INSTALL}" \
BSD_INSTALL_PROGRAM_DIR="${INSTALL_PROGRAM_DIR}" \
BSD_INSTALL_SCRIPT_DIR="${INSTALL_SCRIPT_DIR}" \
BSD_INSTALL_DATA_DIR="${INSTALL_DATA_DIR}" \
BSD_INSTALL_MAN_DIR="${INSTALL_MAN_DIR}"
MAKE_ENV+= ${INSTALL_MACROS}
SCRIPTS_ENV+= ${INSTALL_MACROS}
# The user can override the NO_PACKAGE by specifying this from
# the make command line
.if defined(FORCE_PACKAGE)
. undef NO_PACKAGE
.endif
.if !defined(COMMENT)
COMMENT!= (${CAT} ${PKGDIR}/COMMENT || ${ECHO} -n "(no description)") 2>/dev/null
.endif
DESCR= ${WRKDIR}/.DESCR
.if !defined(DESCR_SRC)
DESCR_SRC?= ${PKGDIR}/DESCR
.endif
PLIST= ${WRKDIR}/.PLIST
.if ${PLIST_TYPE} == "static"
# Automatic platform dependent PLIST handling
. if !defined(PLIST_SRC)
. if exists(${PKGDIR}/PLIST.common)
PLIST_SRC= ${PKGDIR}/PLIST.common
. if exists(${PKGDIR}/PLIST.${OPSYS})
PLIST_SRC+= ${PKGDIR}/PLIST.${OPSYS}
. endif
. if exists(${PKGDIR}/PLIST.common_end)
PLIST_SRC+= ${PKGDIR}/PLIST.common_end
. endif
. elif exists(${PKGDIR}/PLIST.${OPSYS})
PLIST_SRC= ${PKGDIR}/PLIST.${OPSYS}
. else
PLIST_SRC= ${PKGDIR}/PLIST
. endif
. endif
_PLIST_SRC= ${PLIST_SRC}
.elif ${PLIST_TYPE} == "dynamic"
_PLIST_SRC= # empty, since we're using a dynamic PLIST
.endif
DLIST= ${WRKDIR}/.DLIST
DDIR= ${WRKDIR}/.DDIR
# Set PLIST_SUBST to substitute "${variable}" to "value" in PLIST
PLIST_SUBST+= OPSYS=${OPSYS} \
OS_VERSION=${OS_VERSION} \
MACHINE_ARCH=${MACHINE_ARCH} \
MACHINE_GNU_ARCH=${MACHINE_GNU_ARCH} \
MACHINE_GNU_PLATFORM=${MACHINE_GNU_PLATFORM} \
LN=${LN:Q} \
LOWER_VENDOR=${LOWER_VENDOR} \
LOWER_OPSYS=${LOWER_OPSYS} \
LOWER_OS_VERSION=${LOWER_OS_VERSION} \
PKGBASE=${PKGBASE} \
PKGNAME=${PKGNAME_NOREV} \
PKGLOCALEDIR=${PKGLOCALEDIR} \
PKGVERSION=${PKGVERSION:C/nb[0-9]*$//} \
LOCALBASE=${LOCALBASE} \
VIEWBASE=${VIEWBASE} \
X11BASE=${X11BASE} \
X11PREFIX=${X11PREFIX} \
SVR4_PKGNAME=${SVR4_PKGNAME} \
CHGRP=${CHGRP:Q} \
CHMOD=${CHMOD:Q} \
CHOWN=${CHOWN:Q} \
MKDIR=${MKDIR:Q} \
RMDIR=${RMDIR:Q} \
RM=${RM:Q} \
TRUE=${TRUE:Q} \
QMAILDIR=${QMAILDIR}
.if defined(PERL5_SITELIB)
PLIST_SUBST+= PERL5_SITELIB=${PERL5_SITELIB:S/^${LOCALBASE}\///}
.endif
.if defined(PERL5_SITEARCH)
PLIST_SUBST+= PERL5_SITEARCH=${PERL5_SITEARCH:S/^${LOCALBASE}\///}
.endif
.if defined(PERL5_ARCHLIB)
PLIST_SUBST+= PERL5_ARCHLIB=${PERL5_ARCHLIB:S/^${LOCALBASE}\///}
.endif
# Handle info files
#
INFO_FILES?= # default to no info files to handle
USE_MAKEINFO?= no # default to not using makeinfo
.if !empty(INFO_FILES) || empty(USE_MAKEINFO:M[nN][oO])
. include "../../mk/texinfo.mk"
.endif
# CONF_DEPENDS notes a dependency where the config directory for the
# package matches the dependency's config directory. CONF_DEPENDS is
# only meaningful if ${PKG_INSTALLATION_TYPE} == "pkgviews".
#
CONF_DEPENDS?= # empty
.if !empty(CONF_DEPENDS)
USE_PKGINSTALL= yes
.endif
.if defined(USE_PKGINSTALL) && !empty(USE_PKGINSTALL:M[yY][eE][sS])
. include "../../mk/bsd.pkg.install.mk"
.endif
# Set INSTALL_FILE to be the name of any INSTALL file
.if !defined(INSTALL_FILE) && exists(${PKGDIR}/INSTALL)
INSTALL_FILE= ${PKGDIR}/INSTALL
.endif
# Set DEINSTALL_FILE to be the name of any DEINSTALL file
.if !defined(DEINSTALL_FILE) && exists(${PKGDIR}/DEINSTALL)
DEINSTALL_FILE= ${PKGDIR}/DEINSTALL
.endif
# If MESSAGE hasn't been defined, then set MESSAGE_SRC to be a space-separated
# list of files to be concatenated together to generate the MESSAGE file.
#
.if !defined(MESSAGE_SRC) && !defined(MESSAGE)
. if exists(${PKGDIR}/MESSAGE)
MESSAGE_SRC= ${PKGDIR}/MESSAGE
. else
. if exists(${PKGDIR}/MESSAGE.common)
MESSAGE_SRC= ${PKGDIR}/MESSAGE.common
. endif
. if exists(${PKGDIR}/MESSAGE.${OPSYS})
MESSAGE_SRC+= ${PKGDIR}/MESSAGE.${OPSYS}
. endif
. if exists(${PKGDIR}/MESSAGE.${MACHINE_ARCH:C/i[3-6]86/i386/g})
MESSAGE_SRC+= ${PKGDIR}/MESSAGE.${MACHINE_ARCH:C/i[3-6]86/i386/g}
. endif
. if exists(${PKGDIR}/MESSAGE.${OPSYS}-${MACHINE_ARCH:C/i[3-6]86/i386/g})
MESSAGE_SRC+= ${PKGDIR}/MESSAGE.${OPSYS}-${MACHINE_ARCH:C/i[3-6]86/i386/g}
. endif
. endif
.endif
.if defined(MESSAGE_SRC)
MESSAGE= ${WRKDIR}/.MESSAGE
# Set MESSAGE_SUBST to substitute "${variable}" to "value" in MESSAGE
MESSAGE_SUBST+= PKGNAME=${PKGNAME} \
PREFIX=${PREFIX} \
LOCALBASE=${LOCALBASE} \
VIEWBASE=${VIEWBASE} \
X11PREFIX=${X11PREFIX} \
X11BASE=${X11BASE} \
PKG_SYSCONFDIR=${PKG_SYSCONFDIR} \
ROOT_GROUP=${ROOT_GROUP} \
ROOT_USER=${ROOT_USER} \
QMAILDIR=${QMAILDIR}
MESSAGE_SUBST_SED= ${MESSAGE_SUBST:S/=/}!/:S/$/!g/:S/^/ -e s!\\\${/}
.endif
# Latest version of digest(1) required for pkgsrc
DIGEST_REQD= 20010302
.PHONY: uptodate-digest
uptodate-digest:
${_PKG_SILENT}${_PKG_DEBUG} \
if [ -f ${DISTINFO_FILE} -a \( ! -f ${DIGEST} -o ${DIGEST_VERSION} -lt ${DIGEST_REQD} \) ]; then \
{ cd ${_PKGSRCDIR}/pkgtools/digest; \
${MAKE} clean; \
if [ -f ${DIGEST} ]; then \
${MAKE} ${MAKEFLAGS} deinstall; \
fi; \
${MAKE} ${MAKEFLAGS} ${DEPENDS_TARGET}; \
${MAKE} ${MAKEFLAGS} clean; } \
fi
# Latest version of pkgtools required for correct pkgsrc operation.
.if defined(_OPSYS_PKGTOOLS_REQD)
PKGTOOLS_REQD= ${_OPSYS_PKGTOOLS_REQD}
.else
PKGTOOLS_REQD= 20030918
.endif
# Check that we are using up-to-date pkg_* tools with this file.
.PHONY: uptodate-pkgtools
uptodate-pkgtools:
. if !defined(NO_PKGTOOLS_REQD_CHECK)
. if ${PKGTOOLS_VERSION} < ${PKGTOOLS_REQD}
PKG_FAIL_REASON+='Error: The package tools installed on this system are out of date.'
PKG_FAIL_REASON+='The installed package tools are dated ${PKGTOOLS_VERSION:C|(....)(..)(..)|\1/\2/\3|} and you must update'
PKG_FAIL_REASON+='them to at least ${PKGTOOLS_REQD:C|(....)(..)(..)|\1/\2/\3|} using the following command:'
PKG_FAIL_REASON+=''
PKG_FAIL_REASON+=' cd ${_PKGSRCDIR}/pkgtools/pkg_install && ${MAKE} clean && ${MAKE} install'
. endif
. endif
# Files to create for versioning and build information
BUILD_VERSION_FILE= ${WRKDIR}/.build_version
BUILD_INFO_FILE= ${WRKDIR}/.build_info
# Files containing size of pkg w/o and w/ all required pkgs
SIZE_PKG_FILE= ${WRKDIR}/.SizePkg
SIZE_ALL_FILE= ${WRKDIR}/.SizeAll
# File to denote "no deletion of a package"
PRESERVE_FILE= ${WRKDIR}/.PRESERVE
.ifndef PKG_ARGS_COMMON
PKG_ARGS_COMMON= -v -c -${COMMENT:Q}" " -d ${DESCR} -f ${PLIST}
PKG_ARGS_COMMON+= -l -b ${BUILD_VERSION_FILE} -B ${BUILD_INFO_FILE}
PKG_ARGS_COMMON+= -s ${SIZE_PKG_FILE} -S ${SIZE_ALL_FILE}
PKG_ARGS_COMMON+= -P "`${MAKE} ${MAKEFLAGS} run-depends-list PACKAGE_DEPENDS_QUICK=true | ${SORT} -u`"
. if defined(CONFLICTS) && (${PKG_INSTALLATION_TYPE} == "overwrite")
PKG_ARGS_COMMON+= -C "${CONFLICTS}"
. endif
. ifdef INSTALL_FILE
PKG_ARGS_COMMON+= -i ${INSTALL_FILE}
. endif
. ifdef DEINSTALL_FILE
PKG_ARGS_COMMON+= -k ${DEINSTALL_FILE}
. endif
. ifdef MESSAGE
PKG_ARGS_COMMON+= -D ${MESSAGE}
. endif
. ifndef NO_MTREE
PKG_ARGS_COMMON+= -m ${MTREE_FILE}
. endif
. ifdef PKG_PRESERVE
PKG_ARGS_COMMON+= -n ${PRESERVE_FILE}
. endif
PKG_ARGS_INSTALL= -p ${PREFIX} ${PKG_ARGS_COMMON}
PKG_ARGS_BINPKG= -p ${PREFIX:S/^${DESTDIR}//} -L ${PREFIX} ${PKG_ARGS_COMMON}
.endif # !PKG_ARGS_COMMON
.if ${PKG_INSTALLATION_TYPE} == "pkgviews"
PKG_ARGS_INSTALL+= -U # don't update the pkgdb.byfile.db
PKG_ARGS_BINPKG+= -E # create an empty views file in the binpkg
.endif
PKG_SUFX?= .tgz
#PKG_SUFX?= .tbz # bzip2(1) pkgs
# Define SMART_MESSAGES in /etc/mk.conf for messages giving the tree
# of dependencies for building, and the current target.
.ifdef SMART_MESSAGES
_PKGSRC_IN?= ===> ${.TARGET} [${PKGNAME}${_PKGSRC_DEPS}] ===
.else
_PKGSRC_IN?= ===
.endif
# Used to print all the '===>' style prompts - override this to turn them off.
ECHO_MSG?= ${ECHO}
# How to do nothing. Override if you, for some strange reason, would rather
# do something.
DO_NADA?= ${TRUE}
ALL_TARGET?= all
INSTALL_TARGET?= install
.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
INSTALL_TARGET+= install.man
.endif
# If this host is behind a filtering firewall, use passive ftp(1)
.if defined(PASSIVE_FETCH)
FETCH_BEFORE_ARGS += -p
.endif
# Check if we got "rman" with XFree86, for packages that need "rman".
.if defined(USE_RMAN)
. if !exists(${X11BASE}/bin/rman)
DEPENDS+= rman-3.0.9:../../textproc/rman
RMAN?= ${LOCALBASE}/bin/rman
. else
RMAN?= ${X11BASE}/bin/rman
. endif
.endif
.if defined(EVAL_PREFIX)
. for def in ${EVAL_PREFIX}
. if !defined(${def:C/=.*//}_DEFAULT)
${def:C/=.*//}_DEFAULT= ${X11PREFIX}
. endif
. if !defined(${def:C/=.*//})
_depend_${def:C/=.*//} != ${PKG_INFO} -e ${def:C/.*=//} 2>/dev/null; ${ECHO}
. if (${_depend_${def:C/=.*//}} == "")
${def:C/=.*//}=${${def:C/=.*//}_DEFAULT}
. else
_dir_${def:C/=.*//} != (${PKG_INFO} -qp ${def:C/.*=//} 2>/dev/null) | ${AWK} '{ print $$2; exit }'
${def:C/=.*//}=${_dir_${def:C/=.*//}}
MAKEFLAGS+= ${def:C/=.*//}=${_dir_${def:C/=.*//}}
. endif
. endif
. endfor
.endif
# Set the CLASSPATH for Java packages. This must come after EVAL_PREFIX
# is evaluated because PKG_JAVA_HOME is used in a .if.endif conditional,
# and its value is indirectly set by EVAL_PREFIX.
#
.if defined(USE_JAVA)
. if exists(${PKG_JAVA_HOME}/lib/${_JAVA_BASE_CLASSES})
_JAVA_CLASSES_ZIP= ${PKG_JAVA_HOME}/lib/${_JAVA_BASE_CLASSES}:
. endif
. if exists(${PKG_JAVA_HOME}/lib/tools.jar)
_JAVA_TOOLS_JAR= ${PKG_JAVA_HOME}/lib/tools.jar:
. endif
CLASSPATH?= ${_JAVA_CLASSES_ZIP}${_JAVA_TOOLS_JAR}.
MAKE_ENV+= CLASSPATH=${CLASSPATH}
CONFIGURE_ENV+= CLASSPATH=${CLASSPATH}
SCRIPTS_ENV+= CLASSPATH=${CLASSPATH}
.endif
# Popular master sites
MASTER_SITE_XCONTRIB+= \
ftp://uiarchive.uiuc.edu/pub/ftp/ftp.x.org/contrib/ \
ftp://sunsite.doc.ic.ac.uk/packages/X11/contrib/ \
ftp://ftp.gwdg.de/pub/x11/x.org/contrib/ \
ftp://ftp.sunet.se/pub/X11/contrib/ \
ftp://sunsite.sut.ac.jp/pub/archives/X11/contrib/ \
ftp://sunsite.icm.edu.pl/pub/X11/contrib/ \
ftp://ftp.task.gda.pl/mirror/ftp.x.org/contrib/ \
ftp://ftp.ntua.gr/pub/X11/contrib/ \
ftp://sunsite.cnlab-switch.ch/mirror/X11/contrib/ \
ftp://ftp.cica.es/pub/X/contrib/ \
ftp://ftp.unicamp.br/pub/X11/contrib/ \
ftp://ftp.x.org/contrib/
MASTER_SITE_GNU+= \
ftp://ftp.gnu.org/pub/gnu/ \
ftp://ftp.gwdg.de/pub/gnu/ \
http://public.planetmirror.com.au/pub/gnu/ \
ftp://gatekeeper.dec.com/pub/GNU/ \
ftp://ftp.uu.net/archive/systems/gnu/ \
ftp://ftp.de.uu.net/pub/gnu/ \
ftp://ftp.funet.fi/pub/gnu/prep/ \
ftp://ftp.leo.org/pub/comp/os/unix/gnu/ \
ftp://ftp.digex.net/pub/gnu/ \
ftp://ftp.wustl.edu/mirrors/gnu/ \
ftp://ftp.kddlabs.co.jp/pub/gnu/ \
ftp://ftp.dti.ad.jp/pub/GNU/ \
ftp://ftp.mirror.ac.uk/sites/ftp.gnu.org/gnu/ \
ftp://sunsite.org.uk/Mirrors/ftp.gnu.org/pub/gnu/ \
ftp://ftp.informatik.hu-berlin.de/pub/gnu/ \
ftp://ftp.rediris.es/mirror/gnu/ \
ftp://ftp.lip6.fr/pub/gnu/ \
ftp://ftp.tuwien.ac.at/linux/gnu/gnusrc/ \
ftp://ftp.chg.ru/pub/gnu/
MASTER_SITE_GNUSTEP+= \
ftp://ftp.gnustep.org/pub/gnustep/ \
http://public.planetmirror.com.au/pub/gnustep/gnustep/ \
http://www.peanuts.org/peanuts/Mirrors/GNUstep/gnustep/ \
ftp://archive.progeny.com/gnustep/ \
http://archive.progeny.com/gnustep/ \
ftp://ftp.easynet.nl/mirror/GNUstep/ \
http://ftp.easynet.nl/mirror/GNUstep/
MASTER_SITE_PERL_CPAN+= \
ftp://cpan.pair.com/pub/CPAN/modules/by-module/ \
ftp://mirrors.cloud9.net/pub/mirrors/CPAN/modules/by-module/ \
ftp://ftp.sunet.se/pub/lang/perl/CPAN/modules/by-module/ \
ftp://ftp.uvsq.fr/pub/perl/CPAN/modules/by-module/ \
ftp://ftp.gmd.de/mirrors/CPAN/modules/by-module/ \
ftp://ftp.tuwien.ac.at/pub/CPAN/modules/by-module/ \
ftp://cpan.perl.org/CPAN/modules/by-module/
MASTER_SITE_R_CRAN+= \
http://cran.r-project.org/src/ \
ftp://cran.r-project.org/pub/R/src/ \
http://cran.at.r-project.org/src/ \
ftp://cran.at.r-project.org/pub/R/src/ \
http://cran.dk.r-project.org/src/ \
http://cran.ch.r-project.org/src/ \
http://cran.uk.r-project.org/src/ \
http://cran.us.r-project.org/src/ \
http://lib.stat.cmu.edu/R/CRAN/src/ \
ftp://ftp.biostat.washington.edu/mirrors/R/CRAN/src/ \
http://cran.stat.wisc.edu/src/ \
http://SunSITE.auc.dk/R/src/ \
http://www.stat.unipg.it/pub/stat/statlib/R/CRAN/src/ \
ftp://ftp.u-aizu.ac.jp/pub/lang/R/CRAN/src/ \
ftp://dola.snu.ac.kr/pub/R/CRAN/src/ \
http://stat.ethz.ch/CRAN/src/ \
http://www.stats.bris.ac.uk/R/src/
MASTER_SITE_TEX_CTAN+= \
ftp://ftp.wustl.edu/packages/TeX/ \
ftp://ftp.funet.fi/pub/TeX/CTAN/ \
ftp://ftp.tex.ac.uk/public/ctan/tex-archive/ \
ftp://ftp.dante.de/tex-archive/
MASTER_SITE_SUNSITE+= \
ftp://sunsite.unc.edu/pub/Linux/ \
ftp://ftp.infomagic.com/pub/mirrors/linux/sunsite/ \
ftp://ftp.chg.ru/pub/Linux/sunsite/ \
ftp://ftp.is.co.za/linux/sunsite/ \
ftp://ftp.kddlabs.co.jp/Linux/metalab.unc.edu/ \
ftp://ftp.kobe-u.ac.jp/pub/Linux/metalab.unc.edu/ \
ftp://ftp.cse.cuhk.edu.hk/pub4/Linux/ \
ftp://ftp.icm.edu.pl/pub/Linux/sunsite/ \
ftp://ftp.nvg.ntnu.no/pub/mirrors/metalab.unc.edu/ \
ftp://ftp.uvsq.fr/pub5/linux/sunsite/ \
ftp://ftp.lip6.fr/pub/linux/sunsite/ \
ftp://ftp.uni-stuttgart.de/pub/mirror/sunsite.unc.edu/pub/Linux/ \
ftp://ftp.uni-magdeburg.de/pub/mirror/linux/ftp.metalab.unc.edu/ \
ftp://ftp.uni-jena.de/pub/linux/MIRROR.sunsite/ \
ftp://ftp.fu-berlin.de/unix/linux/mirrors/sunsite.unc.edu/ \
ftp://ftp.cs.tu-berlin.de/pub/linux/Mirrors/sunsite.unc.edu/ \
ftp://sunsite.cnlab-switch.ch/mirror/linux/sunsite/ \
ftp://ftp.tuwien.ac.at/pub/linux/ibiblio/ \
ftp://ftp.unicamp.br/pub/systems/Linux/
MASTER_SITE_GNOME+= \
ftp://ftp.gnome.org/pub/GNOME/ \
ftp://ftp.sunet.se/pub/X11/GNOME/ \
ftp://ftp.tuwien.ac.at/hci/GNOME/ \
ftp://ftp.cse.buffalo.edu/pub/Gnome/ \
ftp://ftp.tuwien.ac.at/linux/gnome.org/ \
ftp://ftp.dti.ad.jp/pub/X/gnome/ \
ftp://ftp.kddlabs.co.jp/pub/GNOME/ \
ftp://ftp.chg.ru/pub/X11/gnome/ \
ftp://ftp.dataplus.se/pub/linux/gnome/ \
ftp://ftp.dit.upm.es/linux/gnome/ \
ftp://ftp.mirror.ac.uk/sites/ftp.gnome.org/pub/GNOME/
MASTER_SITE_SOURCEFORGE+= \
http://aleron.dl.sourceforge.net/sourceforge/ \
http://belnet.dl.sourceforge.net/sourceforge/ \
http://cesnet.dl.sourceforge.net/sourceforge/ \
http://easynews.dl.sourceforge.net/sourceforge/ \
http://flow.dl.sourceforge.net/sourceforge/ \
http://heanet.dl.sourceforge.net/sourceforge/ \
http://keihanna.dl.sourceforge.net/sourceforge/ \
http://osdn.dl.sourceforge.net/sourceforge/ \
http://telia.dl.sourceforge.net/sourceforge/ \
http://twtelecom.dl.sourceforge.net/sourceforge/ \
http://umn.dl.sourceforge.net/sourceforge/ \
http://unc.dl.sourceforge.net/sourceforge/ \
ftp://ftp3.sourceforge.net/pub/sourceforge/ \
ftp://ftp.tuwien.ac.at/linux/sourceforge/
MASTER_SITE_SUSE+= \
http://altruistic.lbl.gov/mirrors/suse/${MACHINE_ARCH}/${SUSE_VERSION}/suse/ \
ftp://rpmfind.net/linux/SuSE-Linux/${MACHINE_ARCH}/update/${SUSE_VERSION}/ \
ftp://fr.rpmfind.net/linux/SuSE-Linux/${MACHINE_ARCH}/update/${SUSE_VERSION}/ \
ftp://fr2.rpmfind.net/linux/SuSE-Linux/${MACHINE_ARCH}/update/${SUSE_VERSION}/ \
ftp://speakeasy.rpmfind.net/linux/SuSE-Linux/${MACHINE_ARCH}/update/${SUSE_VERSION}/ \
ftp://ftp.duth.gr/pub/suse/${MACHINE_ARCH}/${SUSE_VERSION}/suse/ \
ftp://ftp.kddlabs.co.jp/Linux/packages/SuSE/suse/${MACHINE_ARCH}/${SUSE_VERSION}/suse/ \
ftp://sunsite.cnlab-switch.ch/mirror/SuSE/suse/${MACHINE_ARCH}/${SUSE_VERSION}/suse/ \
ftp://ftp.mirror.ac.uk/sites/ftp.suse.com/pub/suse/${MACHINE_ARCH}/${SUSE_VERSION}/suse/ \
ftp://mirror.mcs.anl.gov/pub/ftp.suse.com/${MACHINE_ARCH}/${SUSE_VERSION}/suse/
MASTER_SITE_MOZILLA+= \
ftp://ftp.mozilla.org/pub/mozilla.org/mozilla/releases/ \
ftp://ftp.fu-berlin.de/unix/network/www/mozilla/releases/ \
ftp://sunsite.utk.edu/pub/netscape-source/ \
ftp://ftp.informatik.uni-bonn.de/pub/www/mozilla/ \
ftp://ftp-stud.fht-esslingen.de/pub/Mirrors/ftp.mozilla.org/pub/ \
ftp://sunsite.auc.dk/pub/mozilla/ \
ftp://ftp.funet.fi/pub/mirrors/ftp.mozilla.org/pub/ \
ftp://ftp.sunsite.kth.se/archive/www/ftp.mozilla.org/ \
http://public.planetmirror.com.au/pub/mozilla/releases/ \
ftp://ftp2.sinica.edu.tw/pub3/www/mozilla/ \
ftp://ftp.is.co.za/networking/info-service/www/clients/netscape/mozilla/ \
ftp://ftp.rediris.es/mirror/mozilla/ \
ftp://ftp.chg.ru/pub/WWW/mozilla/
MASTER_SITE_XEMACS+= \
ftp://ftp.xemacs.org/pub/xemacs/ \
ftp://ftp.dti.ad.jp/pub/unix/editor/xemacs/ \
ftp://ftp.jaist.ac.jp/pub/GNU/xemacs/ \
ftp://ftp.pasteur.fr/pub/computing/xemacs/ \
http://public.planetmirror.com.au/pub/xemacs/ \
ftp://mirror.aarnet.edu.au/pub/xemacs/ \
ftp://mirror.cict.fr/xemacs/ \
ftp://mirror.nucba.ac.jp/mirror/xemacs/ \
ftp://ring.aist.go.jp/pub/text/xemacs/ \
ftp://ring.asahi-net.or.jp/pub/text/xemacs/
MASTER_SITE_APACHE+= \
http://www.apache.org/dist/ \
http://mirrors.midco.net/pub/apache.org/ \
http://apache.mirror.digitalspace.net/ \
http://apache.mirrorcentral.com/dist/ \
http://www.rge.com/pub/infosystems/apache/ \
http://mirrors.ccs.neu.edu/Apache/dist/ \
http://www.apache.inetcosmos.org/dist/ \
http://www.ibiblio.org/pub/packages/infosystems/WWW/servers/apache/ \
http://apache.ttlhost.com/ \
http://apache.towardex.com/ \
http://mirrors.theonlinerecordstore.com/apache/ \
http://apache.oregonstate.edu/ \
http://mirror.telentente.com/pub/apache/dist/ \
http://www.tux.org/pub/net/apache/dist/ \
http://apache.secsup.org/dist/ \
http://ftp.epix.net/apache/ \
http://public.planetmirror.com.au/pub/apache/dist/ \
ftp://ftp.rge.com/pub/infosystems/apache/ \
ftp://ftp.epix.net/pub/apache/ \
ftp://ftp.ccs.neu.edu/net/mirrors/Apache/dist/ \
ftp://ftp.tux.org/pub/net/apache/dist/ \
ftp://ftp.apache.inetcosmos.org/pub/apache/dist/ \
ftp://www.ibiblio.org/pub/packages/infosystems/WWW/servers/apache/ \
ftp://ftp.knowledge.com/pub/mirrors/apache/dist/ \
ftp://ftp.sunsite.utk.edu/pub/apache/dist/ \
ftp://ftp.oregonstate.edu/pub/apache/ \
ftp://apache.secsup.org/pub/apache/dist/ \
ftp://mirror.telentente.com/pub/apache/dist/ \
ftp://mirrors.midco.net/pub/apache.org/ \
http://nagoya.apache.org/mirror/
MASTER_SITE_DEBIAN+= \
http://ftp.debian.org/debian/ \
http://ftp.at.debian.org/debian/ \
http://ftp.au.debian.org/debian/ \
http://ftp.wa.au.debian.org/debian/ \
http://ftp.bg.debian.org/debian/ \
http://ftp.br.debian.org/debian/ \
http://ftp.cl.debian.org/debian/ \
http://ftp.cz.debian.org/debian/ \
http://ftp.de.debian.org/debian/ \
http://ftp2.de.debian.org/debian/ \
http://ftp.dk.debian.org/debian/ \
http://ftp.ee.debian.org/debian/ \
http://ftp.es.debian.org/debian/ \
http://ftp.fi.debian.org/debian/ \
http://ftp.fr.debian.org/debian/ \
http://ftp2.fr.debian.org/debian/ \
http://ftp.uk.debian.org/debian/ \
http://ftp.hk.debian.org/debian/ \
http://ftp.hr.debian.org/debian/ \
http://ftp.hu.debian.org/debian/ \
http://ftp.ie.debian.org/debian/ \
http://ftp.is.debian.org/debian/ \
http://ftp.it.debian.org/debian/ \
http://ftp2.it.debian.org/debian/ \
http://ftp.jp.debian.org/debian/ \
http://ftp.nl.debian.org/debian/ \
http://ftp.no.debian.org/debian/ \
http://ftp.nz.debian.org/debian/ \
http://ftp.pl.debian.org/debian/ \
http://ftp.ru.debian.org/debian/ \
http://ftp.se.debian.org/debian/ \
http://ftp.si.debian.org/debian/ \
http://ftp.sk.debian.org/debian/ \
http://ftp.tr.debian.org/debian/ \
http://ftp.us.debian.org/debian/
# The primary backup site.
MASTER_SITE_BACKUP?= \
ftp://ftp.fi.NetBSD.org/pub/NetBSD/packages/distfiles/ \
ftp://ftp.cz.NetBSD.org/pub/NetBSD/packages/distfiles/ \
ftp://ftp.NetBSD.org/pub/NetBSD/packages/distfiles/ \
ftp://ftp.FreeBSD.org/pub/FreeBSD/distfiles/
.if defined(DIST_SUBDIR)
_MASTER_SITE_BACKUP:= ${MASTER_SITE_BACKUP:=${DIST_SUBDIR}/}
. if defined(MASTER_SITE_OVERRIDE)
_MASTER_SITE_OVERRIDE:= ${MASTER_SITE_OVERRIDE:=${DIST_SUBDIR}/}
. endif # MASTER_SITE_OVERRIDE
.else # !DIST_SUBDIR
_MASTER_SITE_BACKUP:= ${MASTER_SITE_BACKUP}
. if defined(MASTER_SITE_OVERRIDE)
_MASTER_SITE_OVERRIDE:= ${MASTER_SITE_OVERRIDE}
. endif # MASTER_SITE_OVERRIDE
.endif # DIST_SUBDIR
# Where to put distfiles that don't have any other master site
MASTER_SITE_LOCAL?= \
${MASTER_SITE_BACKUP:=LOCAL_PORTS/} \
# Derived names so that they're easily overridable.
DISTFILES?= ${DISTNAME}${EXTRACT_SUFX}
.if defined(PKGREVISION) && ${PKGREVISION} != "" && ${PKGREVISION} != "0"
. if defined(PKGNAME)
PKGNAME_NOREV:= ${PKGNAME}
PKGNAME:= ${PKGNAME}nb${PKGREVISION}
. else
PKGNAME?= ${DISTNAME}nb${PKGREVISION}
PKGNAME_NOREV= ${DISTNAME}
. endif
.else
PKGNAME?= ${DISTNAME}
PKGNAME_NOREV= ${PKGNAME}
.endif
SVR4_PKGNAME?= ${PKGNAME}
MAINTAINER?= tech-pkg@NetBSD.org
ALLFILES?= ${DISTFILES} ${PATCHFILES}
CKSUMFILES?= ${ALLFILES}
.for __tmp__ in ${IGNOREFILES}
CKSUMFILES:= ${CKSUMFILES:N${__tmp__}}
.endfor
# List of all files, with ${DIST_SUBDIR} in front. Used for fetch and checksum.
.if defined(DIST_SUBDIR)
. if ${CKSUMFILES} != ""
_CKSUMFILES?= ${CKSUMFILES:S/^/${DIST_SUBDIR}\//}
. endif
. if !empty(DISTFILES)
_DISTFILES?= ${DISTFILES:S/^/${DIST_SUBDIR}\//}
. else
_DISTFILES?= # empty
. endif
. if defined(IGNOREFILES) && !empty(IGNOREFILES)
_IGNOREFILES?= ${IGNOREFILES:S/^/${DIST_SUBDIR}\//}
. endif
. if defined(PATCHFILES) && !empty(PATCHFILES)
_PATCHFILES?= ${PATCHFILES:S/^/${DIST_SUBDIR}\//}
. else
_PATCHFILES?= # empty
. endif
.else
_CKSUMFILES?= ${CKSUMFILES}
_DISTFILES?= ${DISTFILES}
_IGNOREFILES?= ${IGNOREFILES}
_PATCHFILES?= ${PATCHFILES}
.endif
_ALLFILES?= ${_DISTFILES} ${_PATCHFILES}
# This is what is actually going to be extracted, and is overridable
# by user.
EXTRACT_ONLY?= ${DISTFILES}
.if !defined(CATEGORIES) || !defined(DISTNAME)
PKG_FAIL_REASON+='CATEGORIES and DISTNAME are mandatory.'
.endif
.if defined(LIB_DEPENDS)
PKG_FAIL_REASON+='LIB_DEPENDS is deprecated and must be replaced with DEPENDS.'
.endif
.if defined(PKG_PATH)
PKG_FAIL_REASON+='Please unset PKG_PATH before doing pkgsrc work!'
.endif
.if defined(MASTER_SITE_SUBDIR)
PKG_FAIL_REASON+='MASTER_SITE_SUBDIR is deprecated and must be replaced with MASTER_SITES.'
.endif
.if defined(PATCH_SITE_SUBDIR)
PKG_FAIL_REASON+='PATCH_SITE_SUBDIR is deprecated and must be replaced with PATCH_SITES.'
.endif
.if defined(ONLY_FOR_ARCHS) || defined(NOT_FOR_ARCHS) \
|| defined(ONLY_FOR_OPSYS) || defined(NOT_FOR_OPSYS)
PKG_FAIL_REASON+='ONLY/NOT_FOR_ARCHS/OPSYS are deprecated and must be replaced with ONLY/NOT_FOR_PLATFORM.'
.endif
.if (${PKGSRC_LOCKTYPE} == "sleep" || ${PKGSRC_LOCKTYPE} == "once")
. if !defined(OBJHOSTNAME)
PKG_FAIL_REASON+='PKGSRC_LOCKTYPE needs OBJHOSTNAME defined.'
. elif !exists(${SHLOCK})
PKG_FAIL_REASON+='The ${SHLOCK} utility does not exist, and is necessary for locking.'
PKG_FAIL_REASON+='Please "${MAKE} install" in ../../pkgtools/shlock.'
. endif
.endif
PKGREPOSITORYSUBDIR?= All
PKGREPOSITORY?= ${PACKAGES}/${PKGREPOSITORYSUBDIR}
PKGFILE?= ${PKGREPOSITORY}/${PKGNAME}${PKG_SUFX}
CONFIGURE_DIRS?= ${WRKSRC}
CONFIGURE_SCRIPT?= ./configure
CONFIGURE_ENV+= PATH=${PATH}:${LOCALBASE}/bin:${X11BASE}/bin
.if defined(GNU_CONFIGURE)
#
# GNU_CONFIGURE_PREFIX is the argument to the --prefix option passed to the
# GNU configure script.
#
GNU_CONFIGURE_PREFIX?= ${PREFIX}
CONFIGURE_ARGS+= --host=${MACHINE_GNU_PLATFORM}
CONFIGURE_ARGS+= --prefix=${GNU_CONFIGURE_PREFIX}
HAS_CONFIGURE= yes
. if defined(USE_X11)
CONFIGURE_ARGS+= --x-includes=${X11BASE}/include
CONFIGURE_ARGS+= --x-libraries=${X11BASE}/lib
. endif
#
# By default, override config.guess and config.sub for GNU configure
# packages. pkgsrc's updated versions of these scripts allows GNU
# configure to recognise NetBSD ports such as shark.
#
CONFIG_GUESS_OVERRIDE?= \
config.guess */config.guess */*/config.guess
CONFIG_SUB_OVERRIDE?= \
config.sub */config.sub */*/config.sub
#
# By default, override config.status for GNU configure packages. We
# never want it to execute after the configure phase has ended as it
# might overwrite any post-configure changes we might have made to the
# generated files.
#
CONFIG_STATUS_OVERRIDE?= \
config.status */config.status */*/config.status
.endif
#
# Config file related settings - see Packages.txt
#
PKG_SYSCONFVAR?= ${PKGBASE}
.if defined(PKG_SYSCONFDIR.${PKG_SYSCONFVAR})
PKG_SYSCONFDIR= ${PKG_SYSCONFDIR.${PKG_SYSCONFVAR}}
PKG_SYSCONFBASEDIR= ${PKG_SYSCONFDIR.${PKG_SYSCONFVAR}}
PKG_SYSCONFDEPOTBASE= # empty
.else
PKG_SYSCONFSUBDIR?= # empty
. if ${PKG_INSTALLATION_TYPE} == "overwrite"
PKG_SYSCONFDEPOTBASE= # empty
PKG_SYSCONFBASEDIR= ${PKG_SYSCONFBASE}
. else
. if !empty(PKG_SYSCONFBASE:M${PREFIX}) || \
!empty(PKG_SYSCONFBASE:M${PREFIX}/*)
PKG_SYSCONFDEPOTBASE= # empty
PKG_SYSCONFBASEDIR= ${PKG_SYSCONFBASE}
. if !empty(CONF_DEPENDS)
_PLIST_IGNORE_FILES+= ${PKG_SYSCONFDIR:S,^${PREFIX}/,,}
. endif
. else
PKG_SYSCONFDEPOTBASE= ${PKG_SYSCONFBASE}/${DEPOT_SUBDIR}
PKG_SYSCONFBASEDIR= ${PKG_SYSCONFDEPOTBASE}/${PKGNAME}
. endif
. endif
. if empty(PKG_SYSCONFSUBDIR)
PKG_SYSCONFDIR= ${PKG_SYSCONFBASEDIR}
. else
PKG_SYSCONFDIR= ${PKG_SYSCONFBASEDIR}/${PKG_SYSCONFSUBDIR}
. endif
.endif
CONFIGURE_ENV+= PKG_SYSCONFDIR="${PKG_SYSCONFDIR}"
MAKE_ENV+= PKG_SYSCONFDIR="${PKG_SYSCONFDIR}"
BUILD_DEFS+= PKG_SYSCONFBASEDIR PKG_SYSCONFDIR
# Passed to most of script invocations
SCRIPTS_ENV+= CURDIR=${.CURDIR} DISTDIR=${DISTDIR} \
PATH=${PATH}:${LOCALBASE}/bin:${X11BASE}/bin \
WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} \
SCRIPTDIR=${SCRIPTDIR} FILESDIR=${FILESDIR} \
_PKGSRCDIR=${_PKGSRCDIR} DEPENDS="${DEPENDS}" \
PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE}
.if defined(BATCH)
SCRIPTS_ENV+= BATCH=yes
.endif
# Get the proper dependencies and set the PATH to use the compiler
# named in PKGSRC_COMPILER.
#
.include "../../mk/compiler.mk"
.if !empty(USE_BUILDLINK2:M[nN][oO]) && !empty(USE_BUILDLINK3:M[nN][oO])
NO_BUILDLINK= # defined
.endif
.if !defined(NO_BUILDLINK)
. if empty(USE_BUILDLINK3:M[nN][oO])
. include "../../mk/buildlink3/bsd.buildlink3.mk"
. elif empty(USE_BUILDLINK2:M[nN][oO])
. include "../../mk/buildlink2/bsd.buildlink2.mk"
. endif
.endif
.include "../../mk/tools.mk"
_PREPENDED_TO_PATH?= # empty
.for _dir_ in ${PREPEND_PATH}
. if empty(_PREPENDED_TO_PATH:M${_dir_})
_PREPENDED_TO_PATH+= ${_dir_}
PATH:= ${_dir_}:${PATH}
. endif
.endfor
# Add these bits to the environment use when invoking the sub-make
# processes for build-related phases.
#
BUILD_ENV+= PATH=${PATH:Q}
BUILD_ENV+= _PREPENDED_TO_PATH=${_PREPENDED_TO_PATH:Q}
.MAIN: all
# Use aliases, so that all versions of English are acceptable
.if defined(LICENCE) && !defined(LICENSE)
LICENSE= ${LICENCE}
.endif
.if defined(ACCEPTABLE_LICENCES) && !defined(ACCEPTABLE_LICENSES)
ACCEPTABLE_LICENSES= ${ACCEPTABLE_LICENCES}
.endif
################################################################
# Many ways to disable a package.
#
# Ignore packages that can't be resold if building for a CDROM.
#
# Don't build a package if it's restricted and we don't want to
# get into that.
#
# Don't build any package that utilizes strong cryptography, for
# when the law of the land forbids it.
#
# Don't attempt to build packages against X if we don't have X.
#
# Don't build a package if it's broken.
################################################################
.if !defined(NO_SKIP)
. if (defined(NO_BIN_ON_CDROM) && defined(FOR_CDROM))
PKG_FAIL_REASON+= "${PKGNAME} may not be placed in binary form on a CDROM:" \
" "${NO_BIN_ON_CDROM:Q}
. endif
. if (defined(NO_SRC_ON_CDROM) && defined(FOR_CDROM))
PKG_FAIL_REASON+= "${PKGNAME} may not be placed in source form on a CDROM:" \
" "${NO_SRC_ON_CDROM:Q}
. endif
. if (defined(RESTRICTED) && defined(NO_RESTRICTED))
PKG_FAIL_REASON+= "${PKGNAME} is restricted:" \
" "${RESTRICTED:Q}
. endif
. if !(${MKCRYPTO} == "YES" || ${MKCRYPTO} == yes)
. if defined(CRYPTO)
PKG_FAIL_REASON+= "${PKGNAME} may not be built, because it utilizes strong cryptography"
. endif
. endif
. if defined(USE_X11) && !exists(${X11BASE}) && \
!empty(USE_PKGSRC_XFREE86:M[Yy][Ee][Ss])
@${MKDIR} ${X11BASE}
@${CHOWN} ${ROOT_USER}:${ROOT_GROUP} ${X11BASE}
@${CHMOD} ${PKGDIRMODE} ${X11BASE}
. elif defined(USE_X11) && !exists(${X11BASE}) && \
!empty(USE_PKGSRC_XFREE86:M[Nn][Oo])
PKG_FAIL_REASON+= "${PKGNAME} uses X11, but ${X11BASE} not found"
. endif
. if defined(BROKEN)
PKG_FAIL_REASON+= "${PKGNAME} is marked as broken:" ${BROKEN:Q}
. endif
. if defined(LICENSE)
. ifdef ACCEPTABLE_LICENSES
. for _lic in ${ACCEPTABLE_LICENSES}
. if ${LICENSE} == "${_lic}"
_ACCEPTABLE= yes
. endif # LICENSE == _lic
. endfor # _lic
. endif # ACCEPTABLE_LICENSES
. ifndef _ACCEPTABLE
PKG_FAIL_REASON+= "${PKGNAME} has an unacceptable license: ${LICENSE}." \
" To build this package, add this line to your /etc/mk.conf:" \
" ACCEPTABLE_LICENSES+=${LICENSE}" \
" To view the license, enter \"make show-license\"."
. endif # _ACCEPTABLE
. endif # LICENSE
# Define __PLATFORM_OK only if the OS matches the pkg's allowed list.
. if defined(ONLY_FOR_PLATFORM) && !empty(ONLY_FOR_PLATFORM)
. for __tmp__ in ${ONLY_FOR_PLATFORM}
. if ${MACHINE_PLATFORM:M${__tmp__}} != ""
__PLATFORM_OK?= yes
. endif # MACHINE_PLATFORM
. endfor # __tmp__
. else # !ONLY_FOR_PLATFORM
__PLATFORM_OK?= yes
. endif # ONLY_FOR_PLATFORM
. for __tmp__ in ${NOT_FOR_PLATFORM}
. if ${MACHINE_PLATFORM:M${__tmp__}} != ""
. undef __PLATFORM_OK
. endif # MACHINE_PLATFORM
. endfor # __tmp__
. if !defined(__PLATFORM_OK)
PKG_SKIP_REASON+= "${PKGNAME} is not available for ${MACHINE_PLATFORM}"
. endif # !__PLATFORM_OK
#
# Now print some error messages that we know we should ignore the pkg
#
. if defined(PKG_FAIL_REASON) || defined(PKG_SKIP_REASON)
fetch checksum extract patch configure all build install package \
update install-depends:
. if defined(SKIP_SILENT)
@${DO_NADA}
. else
@for str in ${PKG_FAIL_REASON} ${PKG_SKIP_REASON} ; \
do \
${ECHO} "${_PKGSRC_IN}> $$str" ; \
done
. endif
. if defined(PKG_FAIL_REASON)
@${FALSE}
. endif
. endif # SKIP
.endif # !NO_SKIP
# Add these defs to the ones dumped into +BUILD_DEFS
BUILD_DEFS+= PKGPATH
BUILD_DEFS+= OPSYS OS_VERSION MACHINE_ARCH MACHINE_GNU_ARCH
BUILD_DEFS+= CPPFLAGS CFLAGS FFLAGS LDFLAGS
BUILD_DEFS+= CONFIGURE_ENV CONFIGURE_ARGS
BUILD_DEFS+= OBJECT_FMT LICENSE RESTRICTED
BUILD_DEFS+= NO_SRC_ON_FTP NO_SRC_ON_CDROM
BUILD_DEFS+= NO_BIN_ON_FTP NO_BIN_ON_CDROM
.if defined(OSVERSION_SPECIFIC)
BUILD_DEFS+= OSVERSION_SPECIFIC
.endif # OSVERSION_SPECIFIC
.PHONY: all
.if !target(all)
. if ${PKGSRC_RUN_TEST} == "YES" || ${PKGSRC_RUN_TEST} == "yes"
all: test
. else
all: build
. endif
.endif
.if !defined(DEPENDS_TARGET)
. if make(package)
DEPENDS_TARGET= package
. elif make(update)
. if defined(UPDATE_TARGET) && ${UPDATE_TARGET} == "replace"
DEPENDS_TARGET= ${UPDATE_TARGET}
. else
DEPENDS_TARGET= update
. endif
. elif make(bin-install)
DEPENDS_TARGET= bin-install
. else
DEPENDS_TARGET= reinstall
. endif
.endif
.if !defined(UPDATE_TARGET)
. if ${DEPENDS_TARGET} == "update"
. if make(package)
UPDATE_TARGET= package
. else
UPDATE_TARGET= install
. endif
. else
UPDATE_TARGET= ${DEPENDS_TARGET}
. endif
.endif
################################################################
# The following are used to create easy dummy targets for
# disabling some bit of default target behavior you don't want.
# They still check to see if the target exists, and if so don't
# do anything, since you might want to set this globally for a
# group of packages in a Makefile.inc, but still be able to
# override from an individual Makefile.
################################################################
# Disable checksum
.PHONY: checksum
.if (defined(NO_CHECKSUM) || exists(${EXTRACT_COOKIE})) && !target(checksum)
checksum: fetch
@${DO_NADA}
.endif
# Disable tools
.PHONY: tools
.if defined(NO_TOOLS) && !target(tools)
tools: patch
${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${TOOLS_COOKIE}
.endif
# Disable buildlink
.PHONY: buildlink
.if defined(NO_BUILDLINK) && !target(buildlink)
buildlink: tools
${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${BUILDLINK_COOKIE}
.endif
# Disable configure
.PHONY: configure
.if defined(NO_CONFIGURE) && !target(configure)
configure: buildlink
${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${CONFIGURE_COOKIE}
.endif
# Disable build
.PHONY: build
.if defined(NO_BUILD) && !target(build)
build: configure
${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE}
.endif
# Disable install
.PHONY: install
.if defined(NO_INSTALL) && !target(install)
install: build
${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE}
.endif
# Disable package
.PHONY: package
.if defined(NO_PACKAGE) && !target(package)
package:
. if defined(SKIP_SILENT)
@${DO_NADA}
. else
@${ECHO_MSG} "${_PKGSRC_IN}> ${PKGNAME} may not be packaged: ${NO_PACKAGE}."
. endif
.endif
################################################################
# More standard targets start here.
#
# These are the body of the build/install framework. If you are
# not happy with the default actions, and you can't solve it by
# adding pre-* or post-* targets/scripts, override these.
################################################################
#
# Define the elementary fetch macros.
#
_FETCH_FILE= \
if [ ! -f $$file -a ! -f $$bfile -a ! -h $$bfile ]; then \
${ECHO_MSG} "=> $$bfile doesn't seem to exist on this system."; \
if [ ! -w ${_DISTDIR}/. ]; then \
${ECHO_MSG} "=> Can't download to ${_DISTDIR} (permission denied?)."; \
exit 1; \
fi; \
for site in $$sites; do \
${ECHO_MSG} "=> Attempting to fetch $$bfile from $${site}."; \
if [ -f ${DISTINFO_FILE} ]; then \
${AWK} 'NF == 5 && $$1 == "Size" && $$2 == "('$$bfile')" { printf("=> [%s %s]\n", $$4, $$5) }' ${DISTINFO_FILE}; \
fi; \
if ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${bfile} ${FETCH_AFTER_ARGS}; then \
if [ -n "${FAILOVER_FETCH}" -a -f ${DISTINFO_FILE} -a -f ${_DISTDIR}/$$bfile ]; then \
alg=`${AWK} 'NF == 4 && $$2 == "('$$file')" && $$3 == "=" {print $$1;}' ${DISTINFO_FILE}`; \
if [ -z "$$alg" ]; then \
alg=${DIGEST_ALGORITHM};\
fi; \
CKSUM=`${DIGEST} $$alg < ${_DISTDIR}/$$bfile`; \
CKSUM2=`${AWK} '$$1 == "'$$alg'" && $$2 == "('$$file')" {print $$4;}' <${DISTINFO_FILE}`; \
if [ "$$CKSUM" = "$$CKSUM2" -o "$$CKSUM2" = "IGNORE" ]; then \
break; \
else \
${ECHO_MSG} "=> Checksum failure - trying next site."; \
fi; \
elif [ ! -f ${_DISTDIR}/$$bfile ]; then \
${ECHO_MSG} "=> FTP didn't fetch expected file, trying next site." ; \
else \
break; \
fi; \
fi \
done; \
if [ ! -f ${_DISTDIR}/$$bfile ]; then \
${ECHO_MSG} "=> Couldn't fetch $$bfile - please try to retrieve this";\
${ECHO_MSG} "=> file manually into ${_DISTDIR} and try again."; \
exit 1; \
fi; \
fi
_CHECK_DIST_PATH= \
if [ "X${DIST_PATH}" != "X" ]; then \
for d in "" ${DIST_PATH:S/:/ /g}; do \
if [ "X$$d" = "X" -o "X$$d" = "X${DISTDIR}" ]; then continue; fi; \
if [ -f $$d/${DIST_SUBDIR}/$$bfile ]; then \
${ECHO} "Using $$d/${DIST_SUBDIR}/$$bfile"; \
${RM} -f $$bfile; \
${LN} -s $$d/${DIST_SUBDIR}/$$bfile $$bfile; \
break; \
fi; \
done; \
fi
#
# Set up ORDERED_SITES to work out the exact list of sites for every file,
# using the dynamic sites script, or sorting according to the master site
# list or the patterns in MASTER_SORT or MASTER_SORT_REGEX as appropriate.
# No actual sorting is done until ORDERED_SITES is expanded.
#
.if defined(MASTER_SORT) || defined(MASTER_SORT_REGEX)
MASTER_SORT?=
MASTER_SORT_REGEX?=
MASTER_SORT_REGEX+= ${MASTER_SORT:S/./\\./g:C/.*/:\/\/[^\/]*&\//}
MASTER_SORT_AWK= BEGIN { RS = " "; ORS = " "; IGNORECASE = 1 ; gl = "${MASTER_SORT_REGEX:S/\\/\\\\/g}"; }
. for srt in ${MASTER_SORT_REGEX}
MASTER_SORT_AWK+= /${srt:C/\//\\\//g}/ { good["${srt:S/\\/\\\\/g}"] = good["${srt:S/\\/\\\\/g}"] " " $$0 ; next; }
. endfor
MASTER_SORT_AWK+= { rest = rest " " $$0; } END { n=split(gl, gla); for(i=1;i<=n;i++) { print good[gla[i]]; } print rest; }
SORT_SITES_CMD= ${ECHO} $$unsorted_sites | ${AWK} '${MASTER_SORT_AWK}'
ORDERED_SITES= ${_MASTER_SITE_OVERRIDE} `${SORT_SITES_CMD:S/\\/\\\\/g:C/"/\"/g}`
.else
ORDERED_SITES= ${_MASTER_SITE_OVERRIDE} $$unsorted_sites
.endif
#
# Associate each file to fetch with the correct site(s).
#
.if defined(DYNAMIC_MASTER_SITES)
. for fetchfile in ${_ALLFILES}
SITES_${fetchfile:T:S/=/--/}?= `${SH} ${FILESDIR}/getsite.sh ${fetchfile:T}`
. endfor
.endif
.if !empty(_DISTFILES)
. for fetchfile in ${_DISTFILES}
SITES_${fetchfile:T:S/=/--/}?= ${MASTER_SITES}
. endfor
.endif
.if !empty(_PATCHFILES)
. for fetchfile in ${_PATCHFILES}
SITES_${fetchfile:T:S/=/--/}?= ${PATCH_SITES}
. endfor
.endif
# This code is only called in a batch case, to check for the presence of
# the distfiles
.PHONY: batch-check-distfiles
batch-check-distfiles:
${_PKG_SILENT}${_PKG_DEBUG} \
gotfiles=yes; \
for file in "" ${_ALLFILES}; do \
case "$$file" in \
"") continue ;; \
*) if [ ! -f ${DISTDIR}/$$file ]; then \
gotfiles=no; \
fi ;; \
esac; \
done; \
case "$$gotfiles" in \
no) ${ECHO} "*** This package requires user intervention to download the distfiles"; \
${ECHO} "*** Please fetch the distfiles manually and place them in"; \
${ECHO} "*** ${DISTDIR}"; \
[ ! -z "${MASTER_SITES}" ] && \
${ECHO} "*** The distfiles are available from ${MASTER_SITES}"; \
[ ! -z "${HOMEPAGE}" ] && \
${ECHO} "*** See ${HOMEPAGE} for more details"; \
${ECHO}; \
${TOUCH} ${INTERACTIVE_COOKIE}; \
${FALSE} ;; \
esac
# check for any vulnerabilities in the package
# Please do not modify the leading "@" here
.PHONY: check-vulnerable
check-vulnerable:
@if [ -f ${PKGVULNDIR}/pkg-vulnerabilities ]; then \
${SETENV} PKGNAME="${PKGNAME}" \
PKGBASE="${PKGBASE}" \
${AWK} '/^$$/ { next } \
/^#.*/ { next } \
$$1 !~ ENVIRON["PKGBASE"] { next } \
{ s = sprintf("${PKG_ADMIN} pmatch \"%s\" %s && ${ECHO} \"*** WARNING - %s vulnerability in %s - see %s for more information ***\"", $$1, ENVIRON["PKGNAME"], $$2, ENVIRON["PKGNAME"], $$3); system(s); }' < ${PKGVULNDIR}/pkg-vulnerabilities || ${FALSE}; \
fi
.PHONY: do-fetch
.if !target(do-fetch)
do-fetch:
. if !defined(ALLOW_VULNERABLE_PACKAGES)
${_PKG_SILENT}${_PKG_DEBUG} \
if [ -f ${PKGVULNDIR}/pkg-vulnerabilities ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> Checking for vulnerabilities in ${PKGNAME}"; \
vul=`${MAKE} ${MAKEFLAGS} check-vulnerable`; \
case "$$vul" in \
"") ;; \
*) ${ECHO} "$$vul"; \
${ECHO} "or define ALLOW_VULNERABLE_PACKAGES if this package is absolutely essential"; \
${FALSE} ;; \
esac; \
else \
${ECHO_MSG} "${_PKGSRC_IN}> *** No ${PKGVULNDIR}/pkg-vulnerabilities file found,"; \
${ECHO_MSG} "${_PKGSRC_IN}> *** skipping vulnerability checks. To fix, install"; \
${ECHO_MSG} "${_PKGSRC_IN}> *** the pkgsrc/security/audit-packages package and run"; \
${ECHO_MSG} "${_PKGSRC_IN}> *** '${LOCALBASE}/sbin/download-vulnerability-list'."; \
fi
. endif
. if !empty(_ALLFILES)
${_PKG_SILENT}${_PKG_DEBUG} \
${TEST} -d ${_DISTDIR} || ${MKDIR} ${_DISTDIR}
. if ${INTERACTIVE_STAGE:Mfetch} == "fetch" && defined(BATCH)
${_PKG_SILENT}${_PKG_DEBUG} \
${MAKE} ${MAKEFLAGS} batch-check-distfiles
. else
. for fetchfile in ${_ALLFILES}
. if defined(_FETCH_MESSAGE)
${_PKG_SILENT}${_PKG_DEBUG} \
file="${fetchfile}"; \
if [ ! -f ${DISTDIR}/$$file ]; then \
${_FETCH_MESSAGE}; \
fi
. else
${_PKG_SILENT}${_PKG_DEBUG} \
cd ${_DISTDIR}; \
file="${fetchfile}"; \
bfile="${fetchfile:T}"; \
unsorted_sites="${SITES_${fetchfile:T:S/=/--/}} ${_MASTER_SITE_BACKUP}"; \
sites="${ORDERED_SITES}"; \
${_CHECK_DIST_PATH}; \
${_FETCH_FILE};
. endif # defined(_FETCH_MESSAGE)
. endfor
. endif # INTERACTIVE_STAGE == fetch
. endif # !empty(_ALLFILES)
.endif
# show both build and run depends directories (non-recursively)
.PHONY: show-depends-dirs
.if !target(show-depends-dirs)
show-depends-dirs:
${_PKG_SILENT}${_PKG_DEBUG} \
dlist=""; \
thisdir=`${PWD_CMD}`; \
for reldir in "" ${DEPENDS:C/^[^:]*://:C/:.*$//} ${BUILD_DEPENDS:C/^[^:]*://:C/:.*$//} ;\
do \
if [ "X$$reldir" = "X" ]; then continue; fi; \
cd $$thisdir/$$reldir; \
WD=`${PWD_CMD}`; \
d=`dirname $$WD`; \
absdir=`basename $$d`/`basename $$WD`; \
dlist="$$dlist $$absdir"; \
done; \
cd $$thisdir; \
${ECHO} "$$dlist"
.endif
# Show all build and run depends, reverse-breadth first, with options.
.if make(show-all-depends-dirs) || make(show-all-depends-dirs-excl) || make (show-root-dirs)
# "awk" macro to recurse over the dependencies efficiently, never running in
# the same same directory twice. You may set the following options via "-v":
#
# NonSelf = 1 to not print own directory;
# RootsOnly = 1 to print only root directories (i.e. directories
# of packages with no dependencies), including possibly
# own directory
#
_RECURSE_DEPENDS_DIRS= \
function append_dirs(dir) { \
command = "cd ../../" dir " && ${MAKE} show-depends-dirs"; \
command | getline tmp_dirs; \
close(command); \
if (tmp_dirs ~ /^$$/) \
root_dirs[p++] = dir; \
for (i = 1; i <= split(tmp_dirs, tmp_r); i++) \
if (!(tmp_r[i] in hash_all_dirs)) { \
all_dirs[n++] = tmp_r[i]; \
hash_all_dirs[tmp_r[i]] = 1 \
} \
} \
BEGIN { \
command = "${PWD_CMD}"; \
command | getline start_dir; \
close(command); \
i = split(start_dir, tmp_r, /\//); \
all_dirs[n++] = tmp_r[i-1] "/" tmp_r[i]; \
for (; m < n; ) \
append_dirs(all_dirs[m++]); \
if (RootsOnly) { \
printf("%s", root_dirs[--p]); \
for (; p > 0; ) \
printf(" %s", root_dirs[--p]) \
} \
else { \
if (m > NonSelf) \
printf("%s", all_dirs[--m]); \
for (; m > NonSelf; ) \
printf(" %s", all_dirs[--m]) \
} \
print \
}
.PHONY: show-all-depends-dirs
.if make(show-all-depends-dirs)
show-all-depends-dirs:
${_PKG_SILENT}${_PKG_DEBUG}${AWK} '${_RECURSE_DEPENDS_DIRS}'
.endif
.PHONY: show-all-depends-dirs-excl
.if make(show-all-depends-dirs-excl)
show-all-depends-dirs-excl:
${_PKG_SILENT}${_PKG_DEBUG}${AWK} -v NonSelf=1 '${_RECURSE_DEPENDS_DIRS}'
.endif
.PHONY: show-root-dirs
.if make(show-root-dirs)
show-root-dirs:
${_PKG_SILENT}${_PKG_DEBUG}${AWK} -v RootsOnly=1 '${_RECURSE_DEPENDS_DIRS}'
.endif
.endif # make(show-{all-depends-dirs{,-excl},root-dirs})
.PHONY: show-distfiles
.if !target(show-distfiles)
show-distfiles:
. if defined(PKG_FAIL_REASON)
${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA}
. else
${_PKG_SILENT}${_PKG_DEBUG} \
for file in "" ${_CKSUMFILES}; do \
if [ "X$$file" = "X" ]; then continue; fi; \
${ECHO} $$file; \
done
. endif
.endif
.PHONY: show-downlevel
.if !target(show-downlevel)
show-downlevel:
. if defined(PKG_FAIL_REASON)
${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA}
. else
${_PKG_SILENT}${_PKG_DEBUG} \
found="`${PKG_BEST_EXISTS} \"${PKGWILDCARD}\" || ${TRUE}`"; \
if [ "X$$found" != "X" -a "X$$found" != "X${PKGNAME}" ]; then \
${ECHO} "${PKGBASE} package: $$found installed, pkgsrc version ${PKGNAME}"; \
if [ "X$$STOP_DOWNLEVEL_AFTER_FIRST" != "X" ]; then \
${ECHO} "stopping after first downlevel pkg found"; \
exit 1; \
fi; \
fi
. endif
.endif
.PHONY: show-installed-depends
.if !target(show-installed-depends)
show-installed-depends:
. if defined(DEPENDS)
${_PKG_SILENT}${_PKG_DEBUG} \
for i in ${DEPENDS:C/:.*$//:Q:S/\ / /g} ; do \
echo "$$i =>" `${PKG_BEST_EXISTS} "$$i"` ; \
done
. endif
.endif
.PHONY: show-needs-update
.if !target(show-needs-update)
show-needs-update:
. if defined(DEPENDS)
${_PKG_SILENT}${_PKG_DEBUG} \
for i in `${MAKE} show-all-depends-dirs`; do \
cd ${_PKGSRCDIR}/$$i; \
want=`${MAKE} show-var VARNAME=PKGNAME`; \
wild=`${MAKE} show-var VARNAME=PKGWILDCARD`; \
have=`${PKG_BEST_EXISTS} "$$wild" || ${TRUE}`; \
if [ -z "$$have" ]; then \
${ECHO} "$$i => (none) => needs install of $$want"; \
elif [ "$$have" != "$$want" ]; then \
${ECHO} "$$i => $$have => needs update to $$want"; \
fi; \
done
. endif
.endif
.PHONY: show-pkgsrc-dir
.if !target(show-pkgsrc-dir)
show-pkgsrc-dir:
. if defined(PKG_FAIL_REASON)
${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA}
. else
${_PKG_SILENT}${_PKG_DEBUG} \
found="`${PKG_BEST_EXISTS} \"${PKGWILDCARD}\" || ${TRUE}`"; \
if [ "X$$found" != "X" ]; then \
${ECHO} ${PKGPATH}; \
fi
. endif
.endif
# Extract
# pkgsrc coarse-grained locking definitions and targets
.if ${PKGSRC_LOCKTYPE} == "none"
_ACQUIRE_LOCK= ${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA}
_RELEASE_LOCK= ${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA}
.else
LOCKFILE= ${WRKDIR}/.lockfile
_ACQUIRE_LOCK= \
${_PKG_SILENT}${_PKG_DEBUG} \
ppid=`${PS} -p $$$$ -o ppid | ${AWK} 'NR == 2 { print $$1 }'`; \
while true; do \
if [ -f /var/run/dmesg.boot -a -f ${LOCKFILE} -a \
/var/run/dmesg.boot -nt ${LOCKFILE} ]; then \
${ECHO} "=> Removing stale ${LOCKFILE}"; \
${RM} ${LOCKFILE}; \
fi; \
${SHLOCK} -f ${LOCKFILE} -p $$ppid && break; \
${ECHO} "=> Lock is held by pid `cat ${LOCKFILE}`"; \
case "${PKGSRC_LOCKTYPE}" in \
once) exit 1 ;; \
sleep) sleep ${PKGSRC_SLEEPSECS} ;; \
esac \
done; \
if [ "${PKG_VERBOSE}" != "" ]; then \
${ECHO_MSG} "=> Lock acquired on behalf of process $$ppid"; \
fi
_RELEASE_LOCK= \
${_PKG_SILENT}${_PKG_DEBUG} \
if [ "${PKG_VERBOSE}" != "" ]; then \
${ECHO_MSG} "=> Lock released on behalf of process `${CAT} ${LOCKFILE}`"; \
fi; \
${RM} ${LOCKFILE}
.endif # PKGSRC_LOCKTYPE
${WRKDIR}:
.if !defined(KEEP_WRKDIR)
. if ${PKGSRC_LOCKTYPE} == "sleep" || ${PKGSRC_LOCKTYPE} == "once"
. if !exists(${LOCKFILE})
${_PKG_SILENT}${_PKG_DEBUG}${RM} -rf ${WRKDIR}
. endif
. endif
.endif
${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${WRKDIR}
.ifdef WRKOBJDIR
. if ${PKGSRC_LOCKTYPE} == "sleep" || ${PKGSRC_LOCKTYPE} == "once"
. if !exists(${LOCKFILE})
${_PKG_SILENT}${_PKG_DEBUG} \
${RM} -f ${WRKDIR_BASENAME} || ${TRUE}
. endif
. endif
${_PKG_SILENT}${_PKG_DEBUG} \
if ${LN} -s ${WRKDIR} ${WRKDIR_BASENAME} 2>/dev/null; then \
${ECHO} "${WRKDIR_BASENAME} -> ${WRKDIR}"; \
fi
.endif # WRKOBJDIR
_EXTRACT_SUFFIXES= .tar.gz .tgz .tar.bz2 .tbz .tar.Z .tar _tar.gz
_EXTRACT_SUFFIXES+= .shar.gz .shar.bz2 .shar.Z .shar
_EXTRACT_SUFFIXES+= .zip
_EXTRACT_SUFFIXES+= .lha .lzh
_EXTRACT_SUFFIXES+= .Z .bz2 .gz
_EXTRACT_SUFFIXES+= .zoo
_EXTRACT_SUFFIXES+= .rar
# If the distfile has a tar.bz2 suffix, use bzcat in preference to gzcat,
# pulling in the "bzip2" package if necessary. [Note: this is only for
# the benefit of pre-1.5 NetBSD systems. "gzcat" on newer systems happily
# decodes bzip2.] Do likewise for ".zip" and ".lha" distfiles.
#
.if !empty(EXTRACT_ONLY:M*.bz2) || !empty(EXTRACT_ONLY:M*.tbz) || \
!empty(EXTRACT_SUFX:M*.bz2) || !empty(EXTRACT_SUFX:M*.tbz)
. if exists(/usr/bin/bzcat)
BZCAT= /usr/bin/bzcat <
. else
BUILD_DEPENDS+= bzip2>=0.9.0b:../../archivers/bzip2
BZCAT= ${LOCALBASE}/bin/bzcat
. endif
.endif
.if !empty(EXTRACT_ONLY:M*.zip) || !empty(EXTRACT_SUFX:M*.zip)
BUILD_DEPENDS+= unzip-[0-9]*:../../archivers/unzip
.endif
.if !empty(EXTRACT_ONLY:M*.lzh) || !empty(EXTRACT_ONLY:M*.lha) || \
!empty(EXTRACT_SUFX:M*.lzh) || !empty(EXTRACT_SUFX:M*.lha)
BUILD_DEPENDS+= lha>=114.9:../../archivers/lha
.endif
.if !defined(GZCAT)
. if !empty(EXTRACT_ONLY:M*.gz) || !empty(EXTRACT_ONLY:M*.tgz) || \
!empty(EXTRACT_SUFX:M*.gz) || !empty(EXTRACT_SUFX:M*.tgz)
BUILD_DEPENDS+= gzip-base:../../archivers/gzip-base
GZCAT= ${LOCALBASE}/bin/zcat
. endif
.endif
.if !empty(EXTRACT_ONLY:M*.zoo) || !empty(EXTRACT_SUFX:M*.zoo)
BUILD_DEPENDS+= unzoo-[0-9]*:../../archivers/unzoo
.endif
.if !empty(EXTRACT_ONLY:M*.rar) || !empty(EXTRACT_SUFX:M*.rar)
BUILD_DEPENDS+= unrar>=3.3.4:../../archivers/unrar
.endif
DECOMPRESS_CMD.tar.gz?= ${GZCAT}
DECOMPRESS_CMD.tgz?= ${DECOMPRESS_CMD.tar.gz}
DECOMPRESS_CMD.tar.bz2?= ${BZCAT}
DECOMPRESS_CMD.tbz?= ${DECOMPRESS_CMD.tar.bz2}
DECOMPRESS_CMD.tar.Z?= ${GZCAT}
DECOMPRESS_CMD.tar?= ${CAT}
DECOMPRESS_CMD.shar.gz?= ${GZCAT}
DECOMPRESS_CMD.shar.bz2?= ${BZCAT}
DECOMPRESS_CMD.shar.Z?= ${GZCAT}
DECOMPRESS_CMD.shar?= ${CAT}
DECOMPRESS_CMD.Z?= ${GZCAT}
DECOMPRESS_CMD.bz2?= ${BZCAT}
DECOMPRESS_CMD.gz?= ${GZCAT}
DECOMPRESS_CMD?= ${GZCAT}
.for __suffix__ in ${_EXTRACT_SUFFIXES}
. if !defined(DECOMPRESS_CMD${__suffix__})
DECOMPRESS_CMD${__suffix__}?= ${DECOMPRESS_CMD}
. endif
.endfor
# If this is empty, then everything gets extracted.
EXTRACT_ELEMENTS?= # empty
DOWNLOADED_DISTFILE= $${extract_file}
EXTRACT_CMD.zip?= ${LOCALBASE}/bin/unzip ${EXTRACT_CMD_OPTS.zip} $${extract_file}
EXTRACT_CMD_OPTS.zip?= -Laqo
EXTRACT_CMD.lha?= ${LOCALBASE}/bin/lha ${EXTRACT_CMD_OPTS.lha} $${extract_file}
EXTRACT_CMD_OPTS.lha?= xq
EXTRACT_CMD.lzh?= ${EXTRACT_CMD.lha}
EXTRACT_CMD_OPTS.lzh?= ${EXTRACT_CMD_OPTS.lha}
EXTRACT_CMD.zoo?= ${LOCALBASE}/bin/unzoo ${EXTRACT_CMD_OPTS.zoo} $${extract_file}
EXTRACT_CMD_OPTS.zoo?= -x
EXTRACT_CMD.rar?= ${LOCALBASE}/bin/unrar ${EXTRACT_CMD_OPTS.rar} $${extract_file}
EXTRACT_CMD_OPTS.rar?= x -inul
.for __suffix__ in .gz .bz2 .Z
EXTRACT_CMD${__suffix__}?= ${DECOMPRESS_CMD${__suffix__}} $${extract_file} > `${BASENAME} $${extract_file} ${__suffix__}`
.endfor
.for __suffix__ in .shar.gz .shar.bz2 .shar.Z .shar
EXTRACT_CMD${__suffix__}?= ${DECOMPRESS_CMD${__suffix__}} $${extract_file} | ${SH}
.endfor
# If EXTRACT_USING_PAX is defined, use pax in preference to (GNU) tar,
# and append 2 tar blocks of zero bytes on the end, in case the archive
# was written with a buggy version of GNU tar.
#
.if defined(EXTRACT_USING_PAX)
_DFLT_EXTRACT_CMD?= { ${DECOMPRESS_CMD} $${extract_file} ; dd if=/dev/zero bs=10k count=2; } | ${PAX} -O -r ${EXTRACT_ELEMENTS}
.else
_DFLT_EXTRACT_CMD?= ${DECOMPRESS_CMD} $${extract_file} | ${GTAR} -xf - ${EXTRACT_ELEMENTS}
.endif
.for __suffix__ in ${_EXTRACT_SUFFIXES}
. if !defined(EXTRACT_CMD${__suffix__})
. if defined(EXTRACT_USING_PAX)
EXTRACT_CMD${__suffix__}?= { ${DECOMPRESS_CMD${__suffix__}} $${extract_file} ; dd if=/dev/zero bs=10k count=2; } | ${PAX} -O -r ${EXTRACT_ELEMENTS}
. else
EXTRACT_CMD${__suffix__}?= ${DECOMPRESS_CMD${__suffix__}} $${extract_file} | ${GTAR} -xf - ${EXTRACT_ELEMENTS}
. endif
. endif
.endfor
# _SHELL_EXTRACT is a "subroutine" for extracting an archive. It extracts
# the contents of archive named by the shell variable "extract_file" based
# on the file extension of the archive.
#
_SHELL_EXTRACT= case $${extract_file} in
.for __suffix__ in ${_EXTRACT_SUFFIXES}
_SHELL_EXTRACT+= *${__suffix__}) ${EXTRACT_CMD${__suffix__}} ;;
.endfor
_SHELL_EXTRACT+= *) ${_DFLT_EXTRACT_CMD} ;;
_SHELL_EXTRACT+= esac
EXTRACT_CMD?= ${_SHELL_EXTRACT}
.PHONY: do-extract
.if !target(do-extract)
do-extract: ${WRKDIR}
. for __file__ in ${EXTRACT_ONLY}
${_PKG_SILENT}${_PKG_DEBUG} \
extract_file="${_DISTDIR}/${__file__}"; export extract_file; \
cd ${WRKDIR}; ${EXTRACT_CMD}
. endfor
.endif
# Patch
# LOCALPATCHES contains the location of local patches to packages
# that are maintained in a directory tree reflecting the same
# hierarchy as the pkgsrc tree, i.e. local patches for www/apache
# would be found as ${LOCALPATCHES}/www/apache/*.
#
.if defined(LOCALPATCHES)
_DFLT_LOCALPATCHFILES= ${LOCALPATCHES}/${PKGPATH}/*
_LOCALPATCHFILES= ${_DFLT_LOCALPATCHFILES}
.endif
.PHONY: do-patch
.if !target(do-patch)
do-patch: uptodate-digest
. if defined(PATCHFILES)
@${ECHO_MSG} "${_PKGSRC_IN}> Applying distribution patches for ${PKGNAME}"
${_PKG_SILENT}${_PKG_DEBUG}cd ${_DISTDIR}; \
for i in ${PATCHFILES}; do \
if [ ${PATCH_DEBUG_TMP} = yes ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> Applying distribution patch $$i" ; \
fi; \
case $$i in \
*.Z|*.gz) \
${GZCAT} $$i | ${PATCH} ${PATCH_DIST_ARGS} \
|| { ${ECHO} Patch $$i failed ; exit 1; } ; \
;; \
*.bz2) \
${BZCAT} $$i | ${PATCH} ${PATCH_DIST_ARGS} \
|| { ${ECHO} Patch $$i failed ; exit 1; } ; \
;; \
*) \
${PATCH} ${PATCH_DIST_ARGS} < $$i \
|| { ${ECHO} Patch $$i failed ; exit 1; } ; \
;; \
esac; \
done
. endif
${_PKG_SILENT}${_PKG_DEBUG} \
patchlist=""; \
if [ -d ${PATCHDIR} ]; then \
if [ "`${ECHO} ${PATCHDIR}/patch-*`" = "${PATCHDIR}/patch-*" ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> Ignoring empty patch directory"; \
if [ -d ${PATCHDIR}/CVS ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> Perhaps you forgot the -P flag to 'cvs checkout' or 'cvs update'?"; \
fi; \
else \
patchlist=`${ECHO} ${PATCHDIR}/patch-*`; \
fi; \
fi; \
if [ "X${_LOCALPATCHFILES}" = "X${_DFLT_LOCALPATCHFILES}" ]; then \
localpatchfiles="`${ECHO} ${_LOCALPATCHFILES}`"; \
if [ "$${localpatchfiles}" != "${_LOCALPATCHFILES}" ]; then \
patchlist="$${patchlist} $${localpatchfiles}"; \
fi; \
else \
patchlist=`${ECHO} $${patchlist} ${_LOCALPATCHFILES}`; \
fi; \
if [ -n "$${patchlist}" ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> Applying pkgsrc patches for ${PKGNAME}" ; \
fail=""; \
for i in $${patchlist}; do \
if [ ! -f "$$i" ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> $$i is not a valid patch file - skipping"; \
continue; \
fi; \
case $$i in \
*.orig|*.rej|*~) \
${ECHO_MSG} "${_PKGSRC_IN}> Ignoring patchfile $$i"; \
continue; \
;; \
${PATCHDIR}/patch-local-*) \
;; \
${PATCHDIR}/patch-*) \
if [ -f ${DISTINFO_FILE} ]; then \
filename=`expr $$i : '.*/\(.*\)'`; \
algsum=`${AWK} 'NF == 4 && $$2 == "('$$filename')" && $$3 == "=" {print $$1 " " $$4}' ${DISTINFO_FILE} || ${TRUE}`; \
if [ "X$$algsum" != "X" ]; then \
alg=`${ECHO} $$algsum | ${AWK} '{ print $$1 }'`; \
recorded=`${ECHO} $$algsum | ${AWK} '{ print $$2 }'`; \
calcsum=`${SED} -e '/\$$NetBSD.*/d' $$i | ${DIGEST} $$alg`; \
if [ ${PATCH_DEBUG_TMP} = yes ]; then \
${ECHO_MSG} "=> Verifying $$filename (using digest algorithm $$alg)"; \
fi; \
fi; \
if [ "X$$algsum" = "X" -o "X$$recorded" = "X" ]; then \
${ECHO_MSG} "**************************************"; \
${ECHO_MSG} "Ignoring unknown patch file: $$i"; \
${ECHO_MSG} "**************************************"; \
continue; \
fi; \
if [ "X$$calcsum" != "X$$recorded" ]; then \
${ECHO_MSG} "**************************************"; \
${ECHO_MSG} "Patch file $$i has been modified"; \
${ECHO_MSG} "**************************************"; \
fail="$$fail $$filename"; \
continue; \
fi; \
else \
${ECHO_MSG} "**************************************"; \
${ECHO_MSG} "Ignoring unknown patch file: $$i"; \
${ECHO_MSG} "**************************************"; \
continue; \
fi; \
;; \
esac; \
if [ ${PATCH_DEBUG_TMP} = yes ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> Applying pkgsrc patch $$i" ; \
fi; \
fuzz=""; \
${PATCH} -v > /dev/null 2>&1 && fuzz="${PATCH_FUZZ_FACTOR}"; \
${PATCH} $$fuzz ${PATCH_ARGS} < $$i || \
{ ${ECHO} Patch $$i failed ; exit 1; }; \
done; \
if [ "X$$fail" != "X" ]; then \
${ECHO_MSG} "Patching failed due to modified patch file(s): $$fail"; \
exit 1; \
fi; \
fi
.endif
# Configure
# _CONFIGURE_PREREQ is a list of targets to run after pre-configure but before
# do-configure. These targets typically edit the files used by the
# do-configure target. The targets are run as dependencies of
# pre-configure-override.
#
# _CONFIGURE_POSTREQ is a list of targets to run after do-configure but before
# post-configure. These targets typically edit the files generated by
# the do-configure target that are used during the build phase.
.if defined(USE_PKGLOCALEDIR)
_PKGLOCALEDIR= ${PREFIX}/${PKGLOCALEDIR}/locale
REPLACE_LOCALEDIR_PATTERNS?= # empty
_REPLACE_LOCALEDIR_PATTERNS= ${REPLACE_LOCALEDIR_PATTERNS}
. if defined(HAS_CONFIGURE) || defined(GNU_CONFIGURE)
_REPLACE_LOCALEDIR_PATTERNS+= [Mm]akefile.in*
. else
_REPLACE_LOCALEDIR_PATTERNS+= [Mm]akefile*
. endif
_REPLACE_LOCALEDIR_PATTERNS_FIND= \
\( ${_REPLACE_LOCALEDIR_PATTERNS:S/$/!/:S/^/-o -name !/:S/!/"/g:S/-o//1} \)
REPLACE_LOCALEDIR?= # empty
_REPLACE_LOCALEDIR= \
${REPLACE_LOCALEDIR} \
`${FIND} . ${_REPLACE_LOCALEDIR_PATTERNS_FIND} -print | ${SED} -e 's|^\./||' | ${GREP} -v '\.orig' | ${SORT} -u`
_CONFIGURE_PREREQ+= subst-pkglocaledir
. if empty(USE_PKGLOCALEDIR:M[nN][oO])
SUBST_CLASSES+= pkglocaledir
. endif
SUBST_MESSAGE.pkglocaledir= "Fixing locale directory references."
SUBST_FILES.pkglocaledir= ${_REPLACE_LOCALEDIR}
SUBST_SED.pkglocaledir= \
-e 's|^\(localedir[ :]*=\).*|\1 ${_PKGLOCALEDIR}|' \
-e 's|^\(gnulocaledir[ :]*=\).*|\1 ${_PKGLOCALEDIR}|' \
-e 's|\(-DLOCALEDIR[ ]*=\)[^ ]*\(.*\)|\1"\\"${_PKGLOCALEDIR}\\""\2|'
.endif
.if defined(REPLACE_PERL)
REPLACE_INTERPRETER+= perl
_REPLACE.perl.old= .*/bin/perl
_REPLACE.perl.new= ${PERL5}
_REPLACE_FILES.perl= ${REPLACE_PERL}
.endif
.if defined(REPLACE_INTERPRETER)
_CONFIGURE_PREREQ+= replace-interpreter
.PHONY: replace-interpreter
replace-interpreter:
. for lang in ${REPLACE_INTERPRETER}
${_PKG_SILENT}${_PKG_DEBUG} \
cd ${WRKSRC}; \
for f in ${_REPLACE_FILES.${lang}}; do \
if [ -f $${f} ]; then \
${SED} -e 's|#!${_REPLACE.${lang}.old}|#!${_REPLACE.${lang}.new}|' \
$${f} > $${f}.new; \
if [ -x $${f} ]; then \
${CHMOD} a+x $${f}.new; \
fi; \
${MV} -f $${f}.new $${f}; \
fi; \
done
. endfor
.endif
.if defined(USE_LIBTOOL) && defined(LTCONFIG_OVERRIDE)
_CONFIGURE_PREREQ+= do-ltconfig-override
.PHONY: do-ltconfig-override
do-ltconfig-override:
. for ltconfig in ${LTCONFIG_OVERRIDE}
${_PKG_SILENT}${_PKG_DEBUG} \
if [ -f ${ltconfig} ]; then \
${RM} -f ${ltconfig}; \
${ECHO} "${RM} -f libtool; ${LN} -s ${_LIBTOOL} libtool" \
> ${ltconfig}; \
${CHMOD} +x ${ltconfig}; \
fi
. endfor
.endif
.if defined(CONFIG_GUESS_OVERRIDE) || defined(CONFIG_SUB_OVERRIDE)
_CONFIGURE_PREREQ+= do-config-star-override
.PHONY: do-config-star-override
do-config-star-override:
. if defined(CONFIG_GUESS_OVERRIDE) && !empty(CONFIG_GUESS_OVERRIDE)
. for _pattern_ in ${CONFIG_GUESS_OVERRIDE}
${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC}; \
for file in ${_pattern_}; do \
if [ -f "$$file" ]; then \
${RM} -f $$file; \
${LN} -s ${_PKGSRCDIR}/mk/gnu-config/config.guess \
$$file; \
fi; \
done
. endfor
. endif
. if defined(CONFIG_SUB_OVERRIDE) && !empty(CONFIG_SUB_OVERRIDE)
. for _pattern_ in ${CONFIG_SUB_OVERRIDE}
${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC}; \
for file in ${_pattern_}; do \
if [ -f "$$file" ]; then \
${RM} -f $$file; \
${LN} -s ${_PKGSRCDIR}/mk/gnu-config/config.sub \
$$file; \
fi; \
done
. endfor
. endif
.endif
PKGCONFIG_OVERRIDE_SED= \
-e 's|^\(Libs:.*[ ]\)-L\([ ]*[^ ]*\)\(.*\)$$|\1${_COMPILER_LD_FLAG}${RPATH_FLAG}\2 -L\2\3|'
.if defined(PKGCONFIG_OVERRIDE) && !empty(PKGCONFIG_OVERRIDE)
_CONFIGURE_PREREQ+= subst-pkgconfig
SUBST_CLASSES+= pkgconfig
SUBST_MESSAGE.pkgconfig= "Adding rpaths to pkgconfig files."
SUBST_FILES.pkgconfig= ${PKGCONFIG_OVERRIDE:S/^${WRKSRC}\///}
SUBST_SED.pkgconfig= ${PKGCONFIG_OVERRIDE_SED}
.endif
# By adding this target, it makes sure the the above PREREQ's work.
.PHONY: pre-configure-override
pre-configure-override: ${_CONFIGURE_PREREQ}
@${DO_NADA}
.PHONY: do-configure
.if !target(do-configure)
do-configure:
. if defined(HAS_CONFIGURE)
. for DIR in ${CONFIGURE_DIRS}
${_PKG_SILENT}${_PKG_DEBUG}${_ULIMIT_CMD}cd ${DIR} && ${SETENV} \
AWK="${AWK}" CC="${CC}" CFLAGS="${CFLAGS:M*}" CPPFLAGS="${CPPFLAGS:M*}" \
CXX="${CXX}" CXXFLAGS="${CXXFLAGS:M*}" FC="${FC}" F77="${FC}" FFLAGS="${FFLAGS:M*}" \
INSTALL="`${TYPE} ${INSTALL} | ${AWK} '{ print $$NF }'` -c -o ${BINOWN} -g ${BINGRP}" \
ac_given_INSTALL="`${TYPE} ${INSTALL} | ${AWK} '{ print $$NF }'` -c -o ${BINOWN} -g ${BINGRP}" \
INSTALL_DATA="${INSTALL_DATA}" \
INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
${CONFIGURE_ENV} ${CONFIG_SHELL} \
${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}
. endfor
. endif
. if defined(USE_IMAKE)
. for DIR in ${CONFIGURE_DIRS}
${_PKG_SILENT}${_PKG_DEBUG}cd ${DIR} && ${SETENV} ${SCRIPTS_ENV} XPROJECTROOT=${X11BASE} ${XMKMF}
. endfor
. endif
.endif
.if defined(USE_LIBTOOL) && \
(defined(LIBTOOL_OVERRIDE) || defined(SHLIBTOOL_OVERRIDE))
_CONFIGURE_POSTREQ+= do-libtool-override
.PHONY: do-libtool-override
do-libtool-override:
. if defined(LIBTOOL_OVERRIDE)
. for _pattern_ in ${LIBTOOL_OVERRIDE}
${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC}; \
for file in ${_pattern_}; do \
if [ -f "$$file" ]; then \
${RM} -f $$file; \
(${ECHO} '#!${CONFIG_SHELL}'; \
${ECHO} 'exec ${_LIBTOOL} "$$@"'; \
) > $$file; \
${CHMOD} +x $$file; \
fi; \
done
. endfor
. endif
. if defined(SHLIBTOOL_OVERRIDE)
. for _pattern_ in ${SHLIBTOOL_OVERRIDE}
${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC}; \
for file in ${_pattern_}; do \
if [ -f "$$file" ]; then \
${RM} -f $$file; \
(${ECHO} '#!${CONFIG_SHELL}'; \
${ECHO} 'exec ${_SHLIBTOOL} "$$@"'; \
) > $$file; \
${CHMOD} +x $$file; \
fi; \
done
. endfor
. endif
.endif
.if defined(CONFIG_STATUS_OVERRIDE)
_CONFIGURE_POSTREQ+= do-config-status-override
.PHONY: do-config-status-override
do-config-status-override:
. for _pattern_ in ${CONFIG_STATUS_OVERRIDE}
${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC}; \
for file in ${_pattern_}; do \
if [ -f "$$file" ]; then \
${MV} -f $$file $$file.overridden; \
${AWK} '/ *-recheck *\| *--recheck.*\)/ { \
print; \
print " exit 0"; \
next; \
} \
{ print } \
' $$file.overridden > $$file; \
${CHMOD} +x $$file; \
fi; \
done
. endfor
.endif
.PHONY: post-configure
post-configure: ${_CONFIGURE_POSTREQ}
# Build
BUILD_DIRS?= ${WRKSRC}
BUILD_MAKE_FLAGS?= ${MAKE_FLAGS}
.PHONY: do-build
.if !target(do-build)
do-build:
. for DIR in ${BUILD_DIRS}
${_PKG_SILENT}${_PKG_DEBUG}${_ULIMIT_CMD}cd ${DIR} && ${SETENV} ${MAKE_ENV} ${MAKE_PROGRAM} ${BUILD_MAKE_FLAGS} -f ${MAKEFILE} ${ALL_TARGET}
. endfor
.endif
#Test
TEST_DIRS?= ${BUILD_DIRS}
TEST_ENV+= ${MAKE_ENV}
TEST_MAKE_FLAGS?= ${MAKE_FLAGS}
.PHONY: do-test
.if !target(do-test)
do-test:
. if defined(TEST_TARGET) && !empty(TEST_TARGET)
. for DIR in ${TEST_DIRS}
${_PKG_SILENT}${_PKG_DEBUG}${_ULIMIT_CMD}cd ${DIR} && ${SETENV} ${TEST_ENV} ${MAKE_PROGRAM} ${TEST_MAKE_FLAGS} -f ${MAKEFILE} ${TEST_TARGET}
. endfor
. else
@${DO_NADA}
. endif
.endif
# Install
INSTALL_DIRS?= ${BUILD_DIRS}
INSTALL_MAKE_FLAGS?= ${MAKE_FLAGS}
.PHONY: do-install
.if !target(do-install)
do-install:
. for DIR in ${INSTALL_DIRS}
${_PKG_SILENT}${_PKG_DEBUG}${_ULIMIT_CMD}cd ${DIR} && ${SETENV} ${MAKE_ENV} ${MAKE_PROGRAM} ${INSTALL_MAKE_FLAGS} -f ${MAKEFILE} ${INSTALL_TARGET}
. endfor
.endif
# Package
.PHONY: real-su-package
.if !target(real-su-package)
real-su-package: ${PLIST} ${DESCR}
${_PKG_SILENT}${_PKG_DEBUG} \
${ECHO_MSG} "${_PKGSRC_IN}> Building binary package for ${PKGNAME}"; \
if ${PKG_INFO} -qe ${PKGNAME}; then \
: The package is installed. ; \
else \
${ECHO_MSG} "=> ${PKGNAME} is not installed."; \
exit 1; \
fi; \
if [ ! -d ${PKGREPOSITORY} ]; then \
${MKDIR} ${PKGREPOSITORY}; \
if [ $$? -ne 0 ]; then \
${ECHO_MSG} "=> Can't create directory ${PKGREPOSITORY}."; \
exit 1; \
fi; \
fi; \
if ${PKG_CREATE} ${PKG_ARGS_BINPKG} ${PKGFILE}; then \
${MAKE} ${MAKEFLAGS} package-links; \
else \
${MAKE} ${MAKEFLAGS} delete-package; \
exit 1; \
fi
${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${PACKAGE_COOKIE}
. if defined(NO_BIN_ON_CDROM)
@${ECHO_MSG} "${_PKGSRC_IN}> Warning: ${PKGNAME} may not be put on a CD-ROM:"
@${ECHO_MSG} "${_PKGSRC_IN}> " ${NO_BIN_ON_CDROM:Q}
. endif
. if defined(NO_BIN_ON_FTP)
@${ECHO_MSG} "${_PKGSRC_IN}> Warning: ${PKGNAME} may not be made available through FTP:"
@${ECHO_MSG} "${_PKGSRC_IN}> " ${NO_BIN_ON_FTP:Q}
. endif
. if defined(RECOMMENDED) && !empty(IGNORE_RECOMMENDED:M[yY][eE][sS])
@${ECHO_MSG} "${_PKGSRC_IN}> Warning: dependency recommendations are being ignored!"
@${ECHO_MSG} "${_PKGSRC_IN}> ${PKGNAME} should not be uploaded nor"
@${ECHO_MSG} "${_PKGSRC_IN}> otherwise be used as a binary package!"
. endif
.endif
# Some support rules for real-su-package
.PHONY: package-links
.if !target(package-links)
package-links:
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} delete-package-links
${_PKG_SILENT}${_PKG_DEBUG}for cat in ${CATEGORIES}; do \
if [ ! -d ${PACKAGES}/$$cat ]; then \
${MKDIR} ${PACKAGES}/$$cat; \
if [ $$? -ne 0 ]; then \
${ECHO_MSG} "=> Can't create directory ${PACKAGES}/$$cat."; \
exit 1; \
fi; \
fi; \
${RM} -f ${PACKAGES}/$$cat/${PKGNAME}${PKG_SUFX}; \
${LN} -s ../${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PACKAGES}/$$cat; \
done;
.endif
.PHONY: delete-package-links
.if !target(delete-package-links)
delete-package-links:
${_PKG_SILENT}${_PKG_DEBUG}\
${FIND} ${PACKAGES} -type l -name ${PKGNAME}${PKG_SUFX} -print | ${XARGS} ${RM} -f
.endif
.PHONY: delete-package
.if !target(delete-package)
delete-package:
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} delete-package-links
${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${PKGFILE}
.endif
.PHONY: real-su-install
real-su-install: ${MESSAGE}
.if !defined(NO_PKG_REGISTER) && !defined(FORCE_PKG_REGISTER) && \
(${PKG_INSTALLATION_TYPE} == "overwrite")
. if defined(CONFLICTS)
${_PKG_SILENT}${_PKG_DEBUG} \
${RM} -f ${WRKDIR}/.CONFLICTS
. for conflict in ${CONFLICTS}
${_PKG_SILENT}${_PKG_DEBUG} \
found="`${PKG_BEST_EXISTS} \"${conflict}\" || ${TRUE}`"; \
if [ X"$$found" != X"" ]; then \
${ECHO} "$$found" >> ${WRKDIR}/.CONFLICTS; \
fi
. endfor
${_PKG_SILENT}${_PKG_DEBUG} \
if [ -s ${WRKDIR}/.CONFLICTS ]; then \
found=`${SED} -e s'|${_PKG_DBDIR}/||g' ${WRKDIR}/.CONFLICTS | tr '\012' ' '`; \
${ECHO_MSG} "${_PKGSRC_IN}> ${PKGNAME} conflicts with installed package(s): $$found found."; \
${ECHO_MSG} "*** They install the same files into the same place."; \
${ECHO_MSG} "*** Please remove $$found first with pkg_delete(1)."; \
${RM} -f ${WRKDIR}/.CONFLICTS; \
exit 1; \
fi
. endif # CONFLICTS
${_PKG_SILENT}${_PKG_DEBUG} \
found="`${PKG_BEST_EXISTS} \"${PKGWILDCARD}\" || ${TRUE}`"; \
if [ "$$found" != "" ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> $$found is already installed - perhaps an older version?"; \
${ECHO_MSG} "*** If so, you may use either of:"; \
${ECHO_MSG} "*** - \"pkg_delete $$found\" and \"${MAKE} reinstall\" to upgrade properly"; \
${ECHO_MSG} "*** - \"${MAKE} update\" to rebuild the package and all of its dependencies"; \
${ECHO_MSG} "*** - \"${MAKE} replace\" to replace only the package without re-linking"; \
${ECHO_MSG} "*** dependencies, risking various problems."; \
exit 1; \
fi
.endif # !NO_PKG_REGISTER && !NO_FORCE_REGISTER && overwrite
.if ${PKG_INSTALLATION_TYPE} == "pkgviews"
${_PKG_SILENT}${_PKG_DEBUG} \
found="`${PKG_INFO} -e ${PKGNAME} || ${TRUE}`"; \
if [ "$$found" != "" ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> $$found is already installed."; \
exit 1; \
fi
.endif
${_PKG_SILENT}${_PKG_DEBUG}if [ `${SH} -c umask` -ne ${DEF_UMASK} ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> Warning: your umask is \"`${SH} -c umask`"\".; \
${ECHO_MSG} "If this is not desired, set it to an appropriate value (${DEF_UMASK})"; \
${ECHO_MSG} "and install this package again by \`\`${MAKE} deinstall reinstall''."; \
fi
.if defined(INSTALLATION_DIRS) && !empty(INSTALLATION_DIRS)
${_PKG_SILENT}${_PKG_DEBUG}${ECHO_MSG} "${_PKGSRC_IN}> Creating installation directories"
${_PKG_SILENT}${_PKG_DEBUG} \
for dir in ${INSTALLATION_DIRS}; do \
case $$dir in \
/*) ;; \
*bin|*bin/*|*libexec|*libexec/*) \
${INSTALL_PROGRAM_DIR} ${PREFIX}/$$dir ;; \
*man/*) \
${INSTALL_MAN_DIR} ${PREFIX}/$$dir ;; \
*) \
${INSTALL_DATA_DIR} ${PREFIX}/$$dir ;; \
esac; \
done
.endif # INSTALLATION_DIRS
.if !defined(NO_MTREE)
${_PKG_SILENT}${_PKG_DEBUG}if [ `${ID} -u` = `${ID} -u ${ROOT_USER}` ]; then \
if [ ! -f ${MTREE_FILE} ]; then \
${ECHO_MSG} "Error: mtree file \"${MTREE_FILE}\" is missing."; \
exit 1; \
else \
if [ ! -d ${PREFIX} ]; then \
${MKDIR} ${PREFIX}; \
fi; \
${MTREE} ${MTREE_ARGS} ${PREFIX}/; \
fi; \
else \
${ECHO_MSG} "Warning: not superuser, can't run mtree."; \
${ECHO_MSG} "Become root and try again to ensure correct permissions."; \
fi
.else
${_PKG_SILENT}${_PKG_DEBUG}[ -d ${PREFIX} ] || ${MKDIR} ${PREFIX}
.endif # !NO_MTREE
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} pre-install-script
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} pre-install
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} do-install
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} post-install
${_PKG_SILENT}#
${_PKG_SILENT}# PLIST must be generated at this late point (instead of
${_PKG_SILENT}# depending on it somewhere earlier), because it needs
${_PKG_SILENT}# to be created _after_ the {pre,do,post}-install
${_PKG_SILENT}# targets are run.
${_PKG_SILENT}#
${_PKG_SILENT}# We generate _before_ post-install-script is run so
${_PKG_SILENT}# that the real config files and rc.d scripts aren't
${_PKG_SILENT}# listed in the PLIST.
${_PKG_SILENT}#
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} ${PLIST}
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} post-install-script
${_PKG_SILENT}${_PKG_DEBUG}newmanpages=`${EGREP} -h \
'^([^@/]*/)*man/([^/]*/)?(man[1-9ln]/.*\.[1-9ln]|cat[1-9ln]/.*\.0)(\.gz)?$$' \
${PLIST} 2>/dev/null || ${TRUE}`; \
if [ X"${MANCOMPRESSED}" != X"" -a X"${MANZ}" = X"" ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> [Automatic manual page handling]"; \
${ECHO_MSG} "${_PKGSRC_IN}> Decompressing manual pages for ${PKGNAME}"; \
for manpage in $$newmanpages; do \
manpage=`${ECHO} $$manpage | ${SED} -e 's|\.gz$$||'`; \
if [ -h ${PREFIX}/$$manpage.gz ]; then \
set - `${LS} -l ${PREFIX}/$$manpage.gz | ${SED} -e 's|\.gz$$||'`; \
shift `expr $$# - 1`; \
${RM} -f ${PREFIX}/$$manpage; \
${LN} -s $${1} ${PREFIX}/$$manpage; \
${RM} ${PREFIX}/$$manpage.gz; \
else \
${GUNZIP_CMD} ${PREFIX}/$$manpage.gz; \
fi; \
if [ X"${PKG_VERBOSE}" != X"" ]; then \
${ECHO_MSG} "$$manpage"; \
fi; \
done; \
fi; \
if [ X"${MANCOMPRESSED}" = X"" -a X"${MANZ}" != X"" ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> [Automatic manual page handling]"; \
${ECHO_MSG} "${_PKGSRC_IN}> Compressing manual pages for ${PKGNAME}"; \
for manpage in $$newmanpages; do \
manpage=`${ECHO} $$manpage | ${SED} -e 's|\.gz$$||'`; \
if [ -h ${PREFIX}/$$manpage ]; then \
set - `${LS} -l ${PREFIX}/$$manpage`; \
shift `expr $$# - 1`; \
${RM} -f ${PREFIX}/$$manpage.gz; \
${LN} -s $${1}.gz ${PREFIX}/$$manpage.gz; \
${RM} ${PREFIX}/$$manpage; \
else \
${GZIP_CMD} ${PREFIX}/$$manpage; \
fi; \
if [ X"${PKG_VERBOSE}" != X"" ]; then \
${ECHO_MSG} "$$manpage"; \
fi; \
done; \
fi
.if ${_DO_SHLIB_CHECKS} == "yes"
. if ${PKG_INSTALLATION_TYPE} == "overwrite"
${_PKG_SILENT}${_PKG_DEBUG} \
${MAKE} ${MAKEFLAGS} do-shlib-handling SHLIB_PLIST_MODE=0
. endif
.endif
.ifdef MESSAGE
@${ECHO_MSG} "${_PKGSRC_IN}> Please note the following:"
@${ECHO_MSG} ""
@${CAT} ${MESSAGE}
@${ECHO_MSG} ""
. if !empty(PKGSRC_MESSAGE_RECIPIENTS)
${_PKG_SILENT}${_PKG_DEBUG} \
(${ECHO} "The ${PKGNAME} package was installed on `${HOSTNAME_CMD}` at `date`"; \
${ECHO} ""; \
${ECHO} "Please note the following:"; \
${ECHO} ""; \
${CAT} ${MESSAGE}; \
${ECHO} "") | \
${MAIL_CMD} -s"Package ${PKGNAME} installed" ${PKGSRC_MESSAGE_RECIPIENTS}
. endif
.endif
.if !defined(NO_PKG_REGISTER)
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} fake-pkg
.endif # !NO_PKG_REGISTER
${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE}
.if defined(PKG_DEVELOPER) && (${CHECK_SHLIBS} == "YES")
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} check-shlibs
.endif
# Do handling of shared libs for two cases:
#
# SHLIB_PLIST_MODE=1: when first called via the ${PLIST} target,
# update the PLIST to contain ELF symlink, run
# ldconfig on a.out, etc. (used when called via
# the ${PLIST} target). Will update ${PLIST}.
# SHLIB_PLIST_MODE=0: when called via the real-su-install target,
# actually generate symlinks for ELF, run ldconfig
# for a.out, etc. Will not modify ${PLIST}.
#
# XXX This target could need some cleanup after it was ripped out of
# real-su-install
#
_AOUT_AWK = \
BEGIN { linkc = 1 } \
/^@/ { lines[NR] = $$0; next } \
function libtool_release(lib) { \
if (gsub("-[^-]+\\.so\\.", ".so.", lib)) { \
if (system("${TEST} -h ${PREFIX}/" lib) == 0) { \
rels[NR] = lib; \
} \
} \
} \
/.*\/lib[^\/]+\.so\.[0-9]+\.[0-9]+\.[0-9]+$$/ { \
libtool_release($$0); \
lines[NR] = $$0; \
sub("\\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
sub("\\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
sub("\\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
if (sub("-[^-]+\\.so$$", ".so")) { \
links[linkc++] = $$0; \
} \
next \
} \
/.*\/lib[^\/]+\.so\.[0-9]+\.[0-9]+$$/ { \
libtool_release($$0); \
lines[NR] = $$0; \
sub("\\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
sub("\\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
if (sub("-[^-]+\\.so$$", ".so")) { \
links[linkc++] = $$0; \
} \
next \
} \
{ lines[NR] = $$0 } \
END { \
for (i = 0 ; i <= linkc ; i++) \
for (j = 1 ; j < NR ; j++) \
if (lines[j] == links[i]) \
lines[j] = "@comment " lines[j]; \
if (${SHLIB_PLIST_MODE}) \
for (i = 1 ; i <= NR ; i++) { \
print lines[i]; \
if (rels[i] != "") \
print rels[i]; \
} \
}
_DYLIB_AWK= \
/^@/ { lines[NR] = $$0; next } \
function libtool_release(lib) { \
if (gsub("\\.so\\.", ".", lib) || gsub("\\.so$$", "", lib)) { \
lib = lib ".dylib"; \
if (system("${TEST} -h ${PREFIX}/" lib) == 0) { \
rels[NR] = lib; \
} \
} \
} \
/.*\/lib[^\/]+\.so\.[0-9]+\.[0-9]+\.[0-9]+$$/ { \
libtool_release($$0); \
lines[NR] = $$0; \
links[linkc++] = $$0; \
sub("\\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
sub("\\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
sub("\\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
if (sub("-[^-]+\\.so$$", ".so")) { \
links[linkc++] = $$0; \
} \
next \
} \
/.*\/lib[^\/]+\.so\.[0-9]+\.[0-9]+$$/ { \
libtool_release($$0); \
lines[NR] = $$0; \
links[linkc++] = $$0; \
sub("\\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
sub("\\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
if (sub("-[^-]+\\.so$$", ".so")) { \
links[linkc++] = $$0; \
} \
next \
} \
/.*\/lib[^\/]+\.so\.[0-9]+$$/ { \
libtool_release($$0); \
lines[NR] = $$0; \
links[linkc++] = $$0; \
sub("\\.[0-9]+$$", ""); \
links[linkc++] = $$0; \
if (sub("-[^-]+\\.so$$", ".so")) { \
links[linkc++] = $$0; \
} \
next \
} \
/.*\/lib[^\/]+\.so$$/ { \
lines[NR] = $$0; \
if (system("${TEST} -e ${PREFIX}/" $$0) == 0) { \
next; \
} \
libtool_release($$0); \
links[linkc++] = $$0; \
if (sub("-[^-]+\\.so$$", ".so")) { \
links[linkc++] = $$0; \
} \
next \
} \
{ lines[NR] = $$0 } \
END { \
for (i = 0 ; i <= linkc ; i++) \
for (j = 1 ; j <= NR ; j++) \
if (lines[j] == links[i]) \
lines[j] = "@comment " lines[j]; \
if (${SHLIB_PLIST_MODE}) \
for (i = 1 ; i <= NR ; i++) { \
print lines[i]; \
if (rels[i] != "") { \
print rels[i]; \
"${LS} -l ${PREFIX}/" rels[i] | getline tgt; \
gsub(".* ", "", tgt); \
if (tgts[tgt] == "") { \
tgts[tgt] = tgt; \
if (index(tgt, "/") == 1) \
print tgt; \
else { \
prefix=""; \
if (match(rels[i], ".*/") != 0) \
prefix=substr(rels[i],1,RLENGTH); \
print prefix tgt; \
} \
} \
} \
} \
}
# Turn lib*.so.*, lib*.so into lib*.a. Drop duplicates.
_AIXLIB_AWK= \
/^@/ { lines[NR] = $$0; next } \
/.*\/lib[^\/]+\.so(\.[0-9]+)*$$/ { \
sub("(\\.[0-9]+)*$$", ""); \
sub("\\.so$$", ".a"); \
lines[NR] = $$0; \
next \
} \
{ lines[NR] = $$0 } \
END { \
nlibs = 0; \
for (i = 1; i <= NR; i++) { \
for (j = 0; j < nlibs; j++) { \
if (libs[j] == lines[i]) \
break; \
} \
if (j >= nlibs) \
print lines[i]; \
if (match(lines[i], ".*/lib[^/]+\\.a$$")) { \
libs[nlibs] = lines[i]; \
nlibs++; \
} \
} \
}
.PHONY: do-shlib-handling
do-shlib-handling:
.if ${SHLIB_HANDLING} == "YES"
${_PKG_SILENT}${_PKG_DEBUG} \
sos=`${EGREP} -h -x '.*/lib[^/]+\.so' ${PLIST} || ${TRUE}`; \
if [ "$$sos" != "" ]; then \
shlib_type=`${MAKE} ${MAKEFLAGS} show-shlib-type`; \
if [ "${SHLIB_PLIST_MODE}" = "0" ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> [Automatic $$shlib_type shared object handling]"; \
fi; \
case "$$shlib_type" in \
ELF) ;; \
"a.out") \
${AWK} '${_AOUT_AWK}' <${PLIST} >${PLIST}.tmp ; \
if [ "${SHLIB_PLIST_MODE}" = "1" ]; then \
${MV} ${PLIST}.tmp ${PLIST}; \
else \
${RM} ${PLIST}.tmp ; \
fi ; \
cnt=`${EGREP} -c -x '@exec[ ]*${LDCONFIG}' ${PLIST} || ${TRUE}`; \
if [ "${SHLIB_PLIST_MODE}" = "1" ]; then \
if [ $$cnt -eq 0 ]; then \
${ECHO} "@exec ${LDCONFIG}" >> ${PLIST}; \
${ECHO} "@unexec ${LDCONFIG}" >> ${PLIST}; \
fi \
fi; \
if [ "${SHLIB_PLIST_MODE}" = "0" ]; then \
if [ "${PKG_VERBOSE}" != "" ]; then \
${ECHO_MSG} "$$sos"; \
${ECHO_MSG} "Running ${LDCONFIG}"; \
fi; \
${LDCONFIG} || ${TRUE}; \
fi \
;; \
"dylib") \
${AWK} '${_DYLIB_AWK}' <${PLIST} >${PLIST}.tmp && \
if [ "${SHLIB_PLIST_MODE}" = "1" ]; then \
${MV} ${PLIST}.tmp ${PLIST}; \
else \
${RM} ${PLIST}.tmp ; \
fi ; \
;; \
"aixlib") \
${AWK} '${_AIXLIB_AWK}' <${PLIST} >${PLIST}.tmp && \
${MV} ${PLIST}.tmp ${PLIST}; \
;; \
"*") \
if [ "${SHLIB_PLIST_MODE}" = "0" ]; then \
${ECHO_MSG} "No shared libraries for ${MACHINE_ARCH}"; \
fi ; \
if [ "${SHLIB_PLIST_MODE}" = "1" ]; then \
for so in $$sos; do \
if [ X"${PKG_VERBOSE}" != X"" ]; then \
${ECHO_MSG} >&2 "Ignoring $$so"; \
fi; \
${SED} -e "s;^$$so$$;@comment No shared objects - &;" \
${PLIST} >${PLIST}.tmp && ${MV} ${PLIST}.tmp ${PLIST}; \
done; \
fi ; \
;; \
esac; \
fi
.endif # SHLIB_HANDLING == "YES"
# Check if all binaries and shlibs find their needed libs
# Must be run after "make install", so that files are installed, and
# ${PLIST} exists.
#
.PHONY: check-shlibs
check-shlibs:
.if !defined(NO_PKG_REGISTER)
${_PKG_SILENT}${_PKG_DEBUG} \
bins=`${PKG_INFO} -qL ${PKGNAME} | { ${EGREP} -h '/(bin|sbin|libexec)/' || ${TRUE}; }`; \
if [ "${OBJECT_FMT}" = "ELF" ]; then \
shlibs=`${PKG_INFO} -qL ${PKGNAME} | { ${EGREP} -h '/lib/lib.*.so' || ${TRUE}; }`; \
elif [ "${OBJECT_FMT}" = "Mach-O" ]; then \
shlibs=`${PKG_INFO} -qL ${PKGNAME} | { ${EGREP} -h '/lib/lib.*.dylib' || ${TRUE}; }`; \
else \
shlibs=""; \
fi; \
if [ "X${LDD}" = X ]; then \
ldd=`${TYPE} ldd 2>/dev/null | ${AWK} '{ print $$NF }'`;\
else \
ldd="${LDD}"; \
fi; \
if [ -x "$$ldd" ]; then \
for i in $${bins} $${shlibs}; do \
err=`{ $$ldd $$i 2>&1 || ${TRUE}; } | { ${GREP} "not found" || ${TRUE}; }`; \
if [ "${PKG_VERBOSE}" != "" ]; then \
${ECHO} "$$ldd $$i"; \
fi; \
if [ "$$err" != "" ]; then \
${ECHO} "$$i: $$err"; \
error=1; \
fi; \
done; \
fi; \
if [ "$$error" = 1 ]; then \
${ECHO} "*** The above programs/libs will not find the listed shared libraries"; \
${ECHO} " at runtime. Please fix the package (add -Wl,-R.../lib in the right places)!"; \
${SHCOMMENT} Might not error-out for non-pkg-developers; \
exit 1; \
fi
.endif # NO_PKG_REGISTER
.if !target(show-shlib-type)
# Show the shared lib type being built: one of ELF, a.out, dylib, or none
.PHONY: show-shlib-type
show-shlib-type:
. if empty(USE_LANGUAGES)
${_PKG_SILENT}${_PKG_DEBUG}${ECHO} "none"
. elif exists(/usr/lib/libc.dylib)
${_PKG_SILENT}${_PKG_DEBUG}${ECHO} "dylib"
. elif ${OPSYS} == "AIX"
${_PKG_SILENT}${_PKG_DEBUG}${ECHO} "aixlib"
. else
${_PKG_SILENT}${_PKG_DEBUG} \
cd ${WRKDIR} && \
sotype=none; \
if [ "X${MKPIC}" != "Xno" -a "X${NOPIC}" = "X" ]; then \
${ECHO} "int main() { return(0); }" > a.$$$$.c; \
${SETENV} PATH=${PATH} \
${CC} ${CFLAGS} a.$$$$.c -o a.$$$$.out; \
case `${FILE_CMD} a.$$$$.out` in \
*ELF*dynamically*) \
sotype=ELF ;; \
*shared*library*) \
sotype="a.out" ;; \
*dynamically*) \
sotype="a.out" ;; \
esac; \
fi; \
${ECHO} "$$sotype"; \
${RM} -f a.$$$$.c a.$$$$.out
. endif # USE_LANGUAGES
.endif
.PHONY: acquire-extract-lock acquire-patch-lock acquire-tools-lock
.PHONY: acquire-buildlink-lock acquire-configure-lock acquire-build-lock
acquire-extract-lock:
${_ACQUIRE_LOCK}
acquire-patch-lock:
${_ACQUIRE_LOCK}
acquire-tools-lock:
${_ACQUIRE_LOCK}
acquire-buildlink-lock:
${_ACQUIRE_LOCK}
acquire-configure-lock:
${_ACQUIRE_LOCK}
acquire-build-lock:
${_ACQUIRE_LOCK}
.PHONY: release-extract-lock release-patch-lock release-tools-lock
.PHONY: release-buildlink-lock release-configure-lock release-build-lock
release-extract-lock:
${_RELEASE_LOCK}
release-patch-lock:
${_RELEASE_LOCK}
release-tools-lock:
${_RELEASE_LOCK}
release-buildlink-lock:
${_RELEASE_LOCK}
release-configure-lock:
${_RELEASE_LOCK}
release-build-lock:
${_RELEASE_LOCK}
################################################################
# Skeleton targets start here
#
# You shouldn't have to change these. Either add the pre-* or
# post-* targets/scripts or redefine the do-* targets. These
# targets don't do anything other than checking for cookies and
# call the necessary targets/scripts.
################################################################
.PHONY: fetch
.if !target(fetch)
fetch:
@cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} real-fetch PKG_PHASE=fetch
.endif
.PHONY: extract
.if !target(extract)
extract: checksum ${WRKDIR} acquire-extract-lock ${EXTRACT_COOKIE} release-extract-lock
.endif
.PHONY: patch
.if !target(patch)
patch: extract acquire-patch-lock ${PATCH_COOKIE} release-patch-lock
.endif
.PHONY: tools
.if !target(tools)
tools: patch acquire-tools-lock ${TOOLS_COOKIE} release-tools-lock
.endif
.PHONY: buildlink
.if !target(buildlink)
buildlink: tools acquire-buildlink-lock ${BUILDLINK_COOKIE} release-buildlink-lock
.endif
.PHONY: configure
.if !target(configure)
configure: buildlink acquire-configure-lock ${CONFIGURE_COOKIE} release-configure-lock
.endif
.PHONY: build
.if !target(build)
build: configure acquire-build-lock ${BUILD_COOKIE} release-build-lock
.endif
.PHONY: test
.if !target(test)
test: build ${TEST_COOKIE}
.endif
.PHONY: install
.if !target(install)
. if ${PKGSRC_RUN_TEST} == "YES" || ${PKGSRC_RUN_TEST} == "yes"
install: uptodate-pkgtools build test ${INSTALL_COOKIE}
. else
install: uptodate-pkgtools build ${INSTALL_COOKIE}
. endif
.endif
.PHONY: package
.if !target(package)
package: uptodate-pkgtools install ${PACKAGE_COOKIE}
.endif
.PHONY: replace
.if !target(replace)
replace: uptodate-pkgtools build real-replace
.endif
.PHONY: undo-replace
.if !target(undo-replace)
undo-replace: uptodate-pkgtools real-undo-replace
.endif
${EXTRACT_COOKIE}:
.if ${INTERACTIVE_STAGE:Mextract} == "extract" && defined(BATCH)
@${ECHO} "*** The extract stage of this package requires user interaction"
@${ECHO} "*** Please extract manually with \"cd ${PKGDIR} && ${MAKE} extract\""
@${TOUCH} ${INTERACTIVE_COOKIE}
@${FALSE}
.else
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} real-extract DEPENDS_TARGET=${DEPENDS_TARGET} PKG_PHASE=extract
.endif
${PATCH_COOKIE}:
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} real-patch PKG_PHASE=patch
${TOOLS_COOKIE}:
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} real-tools PKG_PHASE=tools
${BUILDLINK_COOKIE}:
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${BUILD_ENV} ${MAKE} ${MAKEFLAGS} real-buildlink PKG_PHASE=buildlink
${CONFIGURE_COOKIE}:
.if ${INTERACTIVE_STAGE:Mconfigure} == "configure" && defined(BATCH)
@${ECHO} "*** The configuration stage of this package requires user interaction"
@${ECHO} "*** Please configure manually with \"cd ${PKGDIR} && ${MAKE} configure\""
@${TOUCH} ${INTERACTIVE_COOKIE}
@${FALSE}
.else
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${BUILD_ENV} ${MAKE} ${MAKEFLAGS} real-configure PKG_PHASE=configure
.endif
${BUILD_COOKIE}:
.if ${INTERACTIVE_STAGE:Mbuild} == "build" && defined(BATCH)
@${ECHO} "*** The build stage of this package requires user interaction"
@${ECHO} "*** Please build manually with \"cd ${PKGDIR} && ${MAKE} build\""
@${TOUCH} ${INTERACTIVE_COOKIE}
@${FALSE}
.else
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${BUILD_ENV} ${MAKE} ${MAKEFLAGS} real-build PKG_PHASE=build
.endif
${TEST_COOKIE}:
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${BUILD_ENV} ${MAKE} ${MAKEFLAGS} real-test PKG_PHASE=test
${INSTALL_COOKIE}:
.if ${INTERACTIVE_STAGE:Minstall} == "install" && defined(BATCH)
@${ECHO} "*** The installation stage of this package requires user interaction"
@${ECHO} "*** Please install manually with \"cd ${PKGDIR} && ${MAKE} install\""
@${TOUCH} ${INTERACTIVE_COOKIE}
@${FALSE}
.else
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${BUILD_ENV} ${MAKE} ${MAKEFLAGS} real-install PKG_PHASE=install
.endif
${PACKAGE_COOKIE}:
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${BUILD_ENV} ${MAKE} ${MAKEFLAGS} real-package PKG_PHASE=package
.PHONY: extract-message patch-message tools-message buildlink-message
.PHONY: configure-message build-message test-message
extract-message:
@${ECHO_MSG} "${_PKGSRC_IN}> Extracting for ${PKGNAME}"
patch-message:
@${ECHO_MSG} "${_PKGSRC_IN}> Patching for ${PKGNAME}"
tools-message:
@${ECHO_MSG} "${_PKGSRC_IN}> Overriding tools for ${PKGNAME}"
buildlink-message:
@${ECHO_MSG} "${_PKGSRC_IN}> Buildlinking for ${PKGNAME}"
configure-message:
@${ECHO_MSG} "${_PKGSRC_IN}> Configuring for ${PKGNAME}"
build-message:
@${ECHO_MSG} "${_PKGSRC_IN}> Building for ${PKGNAME}"
test-message:
@${ECHO_MSG} "${_PKGSRC_IN}> Testing for ${PKGNAME}"
.PHONY: extract-cookie patch-cookie tools-cookie buildlink-cookie
.PHONY: configure-cookie build-cookie test-cookie
extract-cookie:
${_PKG_SILENT}${_PKG_DEBUG}${ECHO} ${PKGNAME} >> ${EXTRACT_COOKIE}
patch-cookie:
${_PKG_SILENT}${_PKG_DEBUG} ${TOUCH} ${TOUCH_FLAGS} ${PATCH_COOKIE}
tools-cookie:
${_PKG_SILENT}${_PKG_DEBUG} ${TOUCH} ${TOUCH_FLAGS} ${TOOLS_COOKIE}
buildlink-cookie:
${_PKG_SILENT}${_PKG_DEBUG} ${TOUCH} ${TOUCH_FLAGS} ${BUILDLINK_COOKIE}
configure-cookie:
${_PKG_SILENT}${_PKG_DEBUG} ${TOUCH} ${TOUCH_FLAGS} ${CONFIGURE_COOKIE}
build-cookie:
${_PKG_SILENT}${_PKG_DEBUG} ${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE}
test-cookie:
${_PKG_SILENT}${_PKG_DEBUG} ${TOUCH} ${TOUCH_FLAGS} ${TEST_COOKIE}
.ORDER: pre-fetch do-fetch post-fetch
.ORDER: extract-message install-depends pre-extract do-extract post-extract extract-cookie
.ORDER: patch-message pre-patch do-patch post-patch patch-cookie
.ORDER: tools-message pre-tools do-tools post-tools tools-cookie
.ORDER: buildlink-message pre-buildlink do-buildlink post-buildlink buildlink-cookie
.ORDER: configure-message pre-configure pre-configure-override do-configure post-configure configure-cookie
.ORDER: build-message pre-build do-build post-build build-cookie
.ORDER: test-message pre-test do-test post-test test-cookie
# Please note that the order of the following targets is important, and
# should not be modified (.ORDER is not recognised by make(1) in a serial
# make i.e. without -j n)
.PHONY: real-fetch real-extract real-patch real-tools real-buildlink
.PHONY: real-configure real-build real-test real-install real-package
.PHONY: real-replace real-undo-replace
real-fetch: pre-fetch do-fetch post-fetch
real-extract: extract-message install-depends pre-extract do-extract post-extract extract-cookie
real-patch: patch-message pre-patch do-patch post-patch patch-cookie
real-tools: tools-message pre-tools do-tools post-tools tools-cookie
real-buildlink: buildlink-message pre-buildlink do-buildlink post-buildlink buildlink-cookie
real-configure: configure-message pre-configure pre-configure-override do-configure post-configure configure-cookie
real-build: build-message pre-build do-build post-build build-cookie
real-test: test-message pre-test do-test post-test test-cookie
real-install: do-su-install
real-package: do-su-package
real-replace: do-su-replace
real-undo-replace: do-su-undo-replace
_SU_TARGET= \
if [ `${ID} -u` = `${ID} -u ${ROOT_USER}` ]; then \
${MAKE} ${MAKEFLAGS} $$realtarget; \
elif [ "X${BATCH}" != X"" ]; then \
${ECHO_MSG} "Warning: Batch mode, not superuser, can't run $$action for ${PKGNAME}."; \
${ECHO_MSG} "Become root and try again to ensure correct permissions."; \
else \
args=""; \
if [ "X${FORCE_PKG_REGISTER}" != X"" ]; then \
args="FORCE_PKG_REGISTER=1"; \
fi; \
if [ "X${PKG_DEBUG_LEVEL}" != X"" ]; then \
args="$$args PKG_DEBUG_LEVEL=${PKG_DEBUG_LEVEL}"; \
fi; \
if [ "X${PRE_ROOT_CMD}" != "X${TRUE}" ]; then \
${ECHO} "*** WARNING *** Running: ${PRE_ROOT_CMD}"; \
${PRE_ROOT_CMD}; \
fi; \
${ECHO_MSG} "${_PKGSRC_IN}> Becoming root@`${HOSTNAME_CMD}` to $$action ${PKGBASE}."; \
${ECHO_MSG} -n "`${ECHO} ${SU_CMD} | ${AWK} '{ print $$1 }'` ";\
${SU_CMD} "cd ${.CURDIR}; ${SETENV} PATH=$${PATH}:${SU_CMD_PATH_APPEND} ${MAKE} $$args ${MAKEFLAGS} $$realtarget $$realflags"; \
fi
.PHONY: do-su-install
do-su-install:
${_PKG_SILENT}${_PKG_DEBUG} \
extractname=`${CAT} ${EXTRACT_COOKIE}`; \
case "$$extractname" in \
"") ${ECHO_MSG} "*** Warning: ${WRKDIR} may contain an older version of ${PKGBASE}" ;; \
"${PKGNAME}") ;; \
*) ${ECHO_MSG} "*** Warning: Package version $$extractname in ${WRKDIR}"; \
${ECHO_MSG} "*** Current version ${PKGNAME} in pkgsrc directory"; \
${ECHO_MSG} "*** Cleaning and rebuilding the newer version of the package..."; \
${MAKE} clean && ${MAKE} build ;; \
esac
@${ECHO_MSG} "${_PKGSRC_IN}> Installing for ${PKGNAME}"
${_PKG_SILENT}${_PKG_DEBUG} \
realtarget="real-su-install"; \
action="install"; \
${_SU_TARGET}
.PHONY: do-su-package
do-su-package:
@${ECHO_MSG} "${_PKGSRC_IN}> Packaging ${PKGNAME}"
${_PKG_SILENT}${_PKG_DEBUG} \
realtarget="real-su-package"; \
action="package"; \
${_SU_TARGET}
.PHONY: do-su-replace
do-su-replace:
@${ECHO_MSG} "${_PKGSRC_IN}> Replacing ${PKGNAME}"
${_PKG_SILENT}${_PKG_DEBUG} \
realtarget="real-su-replace"; \
action="replace"; \
${_SU_TARGET}
.PHONY: do-su-undo-replace
do-su-undo-replace:
@${ECHO_MSG} "${_PKGSRC_IN}> Undoing Replacement of ${PKGNAME}"
${_PKG_SILENT}${_PKG_DEBUG} \
realtarget="real-su-undo-replace"; \
action="undo-replace"; \
${_SU_TARGET}
# Empty pre-* and post-* targets
.for name in fetch extract patch tools buildlink configure build test install-script install package
. if !target(pre-${name})
pre-${name}:
@${DO_NADA}
. endif
. if !target(post-${name})
post-${name}:
@${DO_NADA}
. endif
.endfor
# Reinstall
#
# Special target to re-run install
.PHONY: reinstall
.if !target(reinstall)
reinstall:
${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE} ${PLIST}
${_PKG_SILENT}${_PKG_DEBUG}DEPENDS_TARGET=${DEPENDS_TARGET} ${MAKE} ${MAKEFLAGS} install
.endif
# Deinstall
#
# Special target to remove installation
.PHONY: deinstall do-su-deinstall
.if !target(deinstall)
deinstall: do-su-deinstall
do-su-deinstall: uptodate-pkgtools
@${ECHO_MSG} "${_PKGSRC_IN}> Deinstalling for ${PKGBASE}"
${_PKG_SILENT}${_PKG_DEBUG} \
realtarget="real-su-deinstall"; \
realflags="DEINSTALLDEPENDS=${DEINSTALLDEPENDS}"; \
action="deinstall"; \
${_SU_TARGET}
. if (${DEINSTALLDEPENDS} != "NO")
. if (${DEINSTALLDEPENDS} != "ALL")
# used for removing stuff in bulk builds
real-su-deinstall-flags+= -r -R
# used for "update" target
. else
real-su-deinstall-flags+= -r
. endif
. endif
. ifdef PKG_VERBOSE
real-su-deinstall-flags+= -v
. endif
.PHONY: real-su-deinstall
real-su-deinstall:
${_PKG_SILENT}${_PKG_DEBUG} \
found="`${PKG_INFO} -e \"${PKGNAME}\" || ${TRUE}`"; \
case "$$found" in \
"") found="`${PKG_BEST_EXISTS} \"${PKGWILDCARD}\" || ${TRUE}`" ;; \
esac; \
if [ "$$found" != "" ]; then \
${ECHO} Running ${PKG_DELETE} ${real-su-deinstall-flags} $$found ; \
${PKG_DELETE} ${real-su-deinstall-flags} $$found || ${TRUE} ; \
fi
. if (${DEINSTALLDEPENDS} != "NO") && (${DEINSTALLDEPENDS} != "ALL")
@${SHCOMMENT} Also remove BUILD_DEPENDS:
. for pkg in ${BUILD_DEPENDS:C/:.*$//}
${_PKG_SILENT}${_PKG_DEBUG} \
found="`${PKG_BEST_EXISTS} \"${pkg}\" || ${TRUE}`"; \
if [ "$$found" != "" ]; then \
${ECHO} Running ${PKG_DELETE} $$found; \
${PKG_DELETE} ${real-su-deinstall-flags} $$found || ${TRUE}; \
fi
. endfor
. endif # DEINSTALLDEPENDS
@${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
.endif # target(deinstall)
################################################################
# Some more targets supplied for users' convenience
################################################################
# The 'update' target can be used to update a package and all
# currently installed packages that depend upon this package.
.PHONY: update
.if !target(update)
.if exists(${DDIR})
RESUMEUPDATE?= YES
CLEAR_DIRLIST?= NO
update:
${_PKG_SILENT}${_PKG_DEBUG}${ECHO_MSG} \
"${_PKGSRC_IN}> Resuming update for ${PKGNAME}"
. if ${REINSTALL} != "NO" && ${UPDATE_TARGET} != "replace"
${_PKG_SILENT}${_PKG_DEBUG} \
${MAKE} ${MAKEFLAGS} deinstall DEINSTALLDEPENDS=ALL
. endif
.else
RESUMEUPDATE?= NO
CLEAR_DIRLIST?= YES
update:
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} ${DDIR}
. if ${UPDATE_TARGET} != "replace"
${_PKG_SILENT}${_PKG_DEBUG}if ${PKG_INFO} -qe ${PKGBASE}; then \
${MAKE} ${MAKEFLAGS} deinstall DEINSTALLDEPENDS=ALL \
|| (${RM} ${DDIR} && ${FALSE}); \
fi
. endif
.endif
${_PKG_SILENT}${_PKG_DEBUG} \
${MAKE} ${MAKEFLAGS} ${UPDATE_TARGET} KEEP_WRKDIR=YES \
DEPENDS_TARGET=${DEPENDS_TARGET}
${_PKG_SILENT}${_PKG_DEBUG} \
[ ! -s ${DDIR} ] || for dep in `${CAT} ${DDIR}` ; do \
(if cd ../.. && cd "$${dep}" ; then \
${ECHO_MSG} "${_PKGSRC_IN}> Installing in $${dep}" && \
if [ "(" "${RESUMEUPDATE}" = "NO" -o \
"${REINSTALL}" != "NO" ")" -a \
"${UPDATE_TARGET}" != "replace" ] ; then \
${MAKE} ${MAKEFLAGS} deinstall; \
fi && \
${MAKE} ${MAKEFLAGS} ${UPDATE_TARGET} \
DEPENDS_TARGET=${DEPENDS_TARGET} ; \
else \
${ECHO_MSG} "${_PKGSRC_IN}> Skipping removed directory $${dep}"; \
fi) ; \
done
.if ${NOCLEAN} == "NO"
${_PKG_SILENT}${_PKG_DEBUG} \
${MAKE} ${MAKEFLAGS} clean-update CLEAR_DIRLIST=YES
.endif
.PHONY: clean-update
clean-update:
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} ${DDIR}
${_PKG_SILENT}${_PKG_DEBUG} \
if [ -s ${DDIR} ] ; then \
for dep in `${CAT} ${DDIR}` ; do \
(if cd ../.. && cd "$${dep}" ; then \
${MAKE} ${MAKEFLAGS} clean ; \
else \
${ECHO_MSG} "${_PKGSRC_IN}> Skipping removed directory $${dep}";\
fi) ; \
done ; \
fi
.if ${CLEAR_DIRLIST} != "NO"
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} clean
.else
${_PKG_SILENT}${_PKG_DEBUG} \
${MAKE} ${MAKEFLAGS} clean update-dirlist \
DIRLIST="`${CAT} ${DDIR}`" PKGLIST="`${CAT} ${DLIST}`"
${_PKG_SILENT}${_PKG_DEBUG}${ECHO_MSG} \
"${_PKGSRC_IN}> Warning: preserved leftover directory list. Your next";\
${ECHO_MSG} "${_PKGSRC_IN}> \`\`${MAKE} update'' may fail. It is advised to use";\
${ECHO_MSG} "${_PKGSRC_IN}> \`\`${MAKE} update REINSTALL=YES'' instead!"
.endif
.endif # !target(update)
.PHONY: update-dirlist
update-dirlist:
${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} -p ${WRKDIR}
.ifdef PKGLIST
. for __tmp__ in ${PKGLIST}
${_PKG_SILENT}${_PKG_DEBUG}${ECHO} >>${DLIST} "${__tmp__}"
. endfor
.endif
.ifdef DIRLIST
. for __tmp__ in ${DIRLIST}
${_PKG_SILENT}${_PKG_DEBUG}${ECHO} >>${DDIR} "${__tmp__}"
. endfor
.endif
${DDIR}: ${DLIST}
${_PKG_SILENT}${_PKG_DEBUG} \
ddir=`${SED} 's:-[^-]*$$::' ${DLIST}`; \
${ECHO} >${DDIR}; \
for pkg in $${ddir} ; do \
if ${PKG_INFO} -b "$${pkg}" >/dev/null 2>&1 ; then \
${PKG_INFO} -b "$${pkg}" | ${SED} -ne \
's,\([^/]*/[^/]*\)/Makefile:.*,\1,p' | \
${HEAD} -1 >>${DDIR}; \
fi ; \
done
${DLIST}: ${WRKDIR}
${_PKG_SILENT}${_PKG_DEBUG} \
{ ${PKG_INFO} -qR "${PKGWILDCARD}" || ${TRUE}; } > ${DLIST}
# The 'info' target can be used to display information about a package.
.PHONY: info
info: uptodate-pkgtools
${_PKG_SILENT}${_PKG_DEBUG}${PKG_INFO} "${PKGWILDCARD}"
# The 'check' target can be used to check an installed package.
.PHONY: check
check: uptodate-pkgtools
${_PKG_SILENT}${_PKG_DEBUG}${PKG_ADMIN} check "${PKGWILDCARD}"
# The 'list' target can be used to list the files installed by a package.
.PHONY: list
list: uptodate-pkgtools
${_PKG_SILENT}${_PKG_DEBUG}${PKG_INFO} -L "${PKGWILDCARD}"
# Run pkglint:
.PHONY: lint
lint:
${_PKG_SILENT}${_PKG_DEBUG}${LOCALBASE}/bin/pkglint | ${GREP} -v ^OK
# Create a binary package from an install package using "pkg_tarup"
.PHONY: tarup
tarup:
.if ${PKG_INSTALLATION_TYPE} == "overwrite"
${_PKG_SILENT}${_PKG_DEBUG} \
${RM} -f ${PACKAGES}/All/${PKGNAME}${PKG_SUFX}; \
${SETENV} PKG_DBDIR=${_PKG_DBDIR} PKG_SUFX=${PKG_SUFX} \
PKGREPOSITORY=${PACKAGES}/All \
${LOCALBASE}/bin/pkg_tarup ${PKGNAME}; \
for CATEGORY in ${CATEGORIES}; do \
${MKDIR} ${PACKAGES}/$$CATEGORY; \
cd ${PACKAGES}/$$CATEGORY; \
${RM} -f ${PKGNAME}${PKG_SUFX}; \
${LN} -s ../All/${PKGNAME}${PKG_SUFX}; \
done
.endif
# shared code for replace and undo-replace
_REPLACE= \
if [ -f ${_PKG_DBDIR}/$$oldpkgname/+REQUIRED_BY ]; then \
${MV} ${_PKG_DBDIR}/$$oldpkgname/+REQUIRED_BY ${WRKDIR}/.req; \
fi; \
${MAKE} deinstall; \
$$replace_action; \
if [ -f ${WRKDIR}/.req ]; then \
${MV} ${WRKDIR}/.req ${_PKG_DBDIR}/$$newpkgname/+REQUIRED_BY; \
for pkg in `${CAT} ${_PKG_DBDIR}/$$newpkgname/+REQUIRED_BY`; do \
${SETENV} NEWPKGNAME=$$newpkgname \
${AWK} '/^@pkgdep '$$oldpkgname'/ { print "@pkgdep " ENVIRON["NEWPKGNAME"]; next } { print }' \
< ${_PKG_DBDIR}/$$pkg/+CONTENTS > ${_PKG_DBDIR}/$$pkg/+CONTENTS.$$$$ && \
${MV} ${_PKG_DBDIR}/$$pkg/+CONTENTS.$$$$ ${_PKG_DBDIR}/$$pkg/+CONTENTS; \
done; \
fi
# replace a package in place - not for the faint-hearted
.PHONY: real-su-replace
real-su-replace:
${_PKG_SILENT}${_PKG_DEBUG} \
${ECHO_MSG} "*** WARNING - experimental target - data loss may be experienced ***"; \
if [ -x ${LOCALBASE}/bin/pkg_tarup ]; then \
${SETENV} PKGREPOSITORY=${WRKDIR} ${LOCALBASE}/bin/pkg_tarup ${PKGBASE}; \
else \
${ECHO} "No ${LOCALBASE}/bin/pkg_tarup binary - can't pkg_tarup ${PKGBASE}"; \
exit 1; \
fi
${_PKG_SILENT}${_PKG_DEBUG} \
oldpkgname=`${PKG_BEST_EXISTS} "${PKGWILDCARD}"`; \
newpkgname=${PKGNAME}; \
${ECHO} "$$oldpkgname" > ${WRKDIR}/.replace; \
replace_action="${MAKE} install"; \
${_REPLACE}
# undo the replacement of a package - not for the faint-hearted either
.PHONY: real-su-undo-replace
real-su-undo-replace:
${_PKG_SILENT}${_PKG_DEBUG} \
if [ ! -f ${WRKDIR}/.replace ]; then \
${ECHO_MSG} "No replacement to undo"; \
exit 1; \
fi
${_PKG_SILENT}${_PKG_DEBUG} \
${ECHO_MSG} "*** WARNING - experimental target - data loss may be experienced ***"; \
oldpkgname=${PKGNAME}; \
newpkgname=`${CAT} ${WRKDIR}/.replace`; \
replace_action="${SETENV} ${PKG_ADD} ${WRKDIR}/$$newpkgname${PKG_SUFX}"; \
${_REPLACE}; \
${RM} ${WRKDIR}/.replace
# This is for the use of sites which store distfiles which others may
# fetch - only fetch the distfile if it is allowed to be
# re-distributed freely
.PHONY: mirror-distfiles
mirror-distfiles:
.if !defined(NO_SRC_ON_FTP)
@${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} fetch NO_SKIP=yes NO_CHECK_DEPENDS=yes
.endif
# Cleaning up
.PHONY: pre-clean
.if !target(pre-clean)
pre-clean:
@${DO_NADA}
.endif
.PHONY: clean
.if !target(clean)
clean: pre-clean
. if (${CLEANDEPENDS} != "NO") && (defined(BUILD_DEPENDS) || defined(DEPENDS))
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} clean-depends
. endif
@${ECHO_MSG} "${_PKGSRC_IN}> Cleaning for ${PKGNAME}"
${_PKG_SILENT}${_PKG_DEBUG} \
if [ -d ${WRKDIR} ]; then \
if [ -w ${WRKDIR} ]; then \
${RM} -rf ${WRKDIR}; \
else \
${ECHO_MSG} "${_PKGSRC_IN}> ${WRKDIR} not writable, skipping"; \
fi; \
fi
. ifdef WRKOBJDIR
-${_PKG_SILENT}${_PKG_DEBUG} \
${RMDIR} ${BUILD_DIR} 2>/dev/null; \
${RM} -f ${WRKDIR_BASENAME}
. endif
.endif
.PHONY: clean-depends
.if !target(clean-depends)
clean-depends:
. if defined(BUILD_DEPENDS) || defined(DEPENDS)
${_PKG_SILENT}${_PKG_DEBUG} \
for i in `${MAKE} ${MAKEFLAGS} show-all-depends-dirs-excl` ;\
do \
cd ${.CURDIR}/../../$$i && \
${MAKE} ${MAKEFLAGS} CLEANDEPENDS=NO clean; \
done
. endif
.endif
.PHONY: pre-distclean
.if !target(pre-distclean)
pre-distclean:
@${DO_NADA}
.endif
.PHONY: cleandir
.if !target(cleandir)
cleandir: clean
.endif
.PHONY: distclean
.if !target(distclean)
distclean: pre-distclean clean
${_PKG_SILENT}${ECHO_MSG} "${_PKGSRC_IN}> Dist cleaning for ${PKGNAME}"
${_PKG_SILENT}${_PKG_DEBUG}if [ -d ${_DISTDIR} ]; then \
cd ${_DISTDIR} && \
${TEST} -z "${DISTFILES}" || ${RM} -f ${DISTFILES}; \
${TEST} -z "${PATCHFILES}" || ${RM} -f ${PATCHFILES}; \
fi
. if defined(DIST_SUBDIR) && exists(DIST_SUBDIR)
-${_PKG_SILENT}${_PKG_DEBUG}${RMDIR} ${_DISTDIR}
. endif
-${_PKG_SILENT}${_PKG_DEBUG}${RM} -f README.html
.endif
# Prints out a script to fetch all needed files (no checksumming).
.PHONY: fetch-list
.if !target(fetch-list)
fetch-list:
@${ECHO} '#!/bin/sh'
@${ECHO} '#'
@${ECHO} '# This is an auto-generated script, the result of running'
@${ECHO} '# `${MAKE} fetch-list'"'"' in directory "'"`${PWD_CMD}`"'"'
@${ECHO} '# on host "'"`${UNAME} -n`"'" on "'"`date`"'".'
@${ECHO} '#'
@${MAKE} ${MAKEFLAGS} fetch-list-recursive
.endif # !target(fetch-list)
.PHONY: fetch-list-recursive
.if !target(fetch-list-recursive)
fetch-list-recursive:
${_PKG_SILENT}${_PKG_DEBUG} \
for dir in `${MAKE} ${MAKEFLAGS} show-all-depends-dirs`; do \
(cd ../../$$dir && \
${MAKE} ${MAKEFLAGS} fetch-list-one-pkg \
| ${AWK} ' \
/^[^#]/ { FoundSomething = 1 } \
/^unsorted/ { gsub(/[[:space:]]+/, " \\\n\t") } \
/^echo/ { gsub(/;[[:space:]]+/, "\n") } \
{ block[line_c++] = $$0 } \
END { if (FoundSomething) \
for (line = 0; line < line_c; line++) \
print block[line] } \
') \
done
.endif # !target(fetch-list-recursive)
.PHONY: fetch-list-one-pkg
.if !target(fetch-list-one-pkg)
fetch-list-one-pkg:
. if !empty(_ALLFILES)
@${ECHO}
@${ECHO} '#'
@location=`${PWD_CMD} | ${AWK} -F / '{ print $$(NF-1) "/" $$NF }'`; \
${ECHO} '# Need additional files for ${PKGNAME} ('$$location')...'
@${ECHO} '#'
@${MKDIR} ${_DISTDIR}
. for fetchfile in ${_ALLFILES}
. if defined(_FETCH_MESSAGE)
@(cd ${_DISTDIR}; \
if [ ! -f ${fetchfile:T} ]; then \
${ECHO}; \
filesize=`${AWK} ' \
/^Size/ && $$2 == "(${fetchfile})" { print $$4 } \
' ${DISTINFO_FILE}` || true; \
${ECHO} '# Prompt user to get ${fetchfile} ('$${filesize-???}' bytes) manually:'; \
${ECHO} '#'; \
${ECHO} ${_FETCH_MESSAGE:Q}; \
fi)
. elif defined(DYNAMIC_MASTER_SITES)
@(cd ${_DISTDIR}; \
if [ ! -f ${fetchfile:T} ]; then \
${ECHO}; \
filesize=`${AWK} ' \
/^Size/ && $$2 == "(${fetchfile})" { print $$4 } \
' ${DISTINFO_FILE}` || true; \
${ECHO} '# Fetch ${fetchfile} ('$${filesize-???}' bytes):'; \
${ECHO} '#'; \
${ECHO} '${SH} -s ${fetchfile:T} <<"EOF" |('; \
${CAT} ${FILESDIR}/getsite.sh; \
${ECHO} EOF; \
${ECHO} read unsorted_sites; \
${ECHO} 'unsorted_sites="$${unsorted_sites} ${_MASTER_SITE_BACKUP}"'; \
${ECHO} sites='"'${ORDERED_SITES:Q}'"'; \
${ECHO} "${MKDIR} ${_DISTDIR}"; \
${ECHO} 'cd ${_DISTDIR} && [ -f ${fetchfile} -o -f ${fetchfile:T} ] ||'; \
${ECHO} 'for site in $$sites; do'; \
${ECHO} ' ${FETCH_CMD} ${FETCH_BEFORE_ARGS} "$${site}${fetchfile:T}" ${FETCH_AFTER_ARGS} && break ||'; \
${ECHO} ' ${ECHO} ${fetchfile} not fetched'; \
${ECHO} done; \
${ECHO} ')'; \
fi)
. else
@(cd ${_DISTDIR}; \
if [ ! -f ${fetchfile:T} ]; then \
${ECHO}; \
filesize=`${AWK} ' \
/^Size/ && $$2 == "(${fetchfile})" { print $$4 } \
' ${DISTINFO_FILE}` || true; \
${ECHO} '# Fetch ${fetchfile} ('$${filesize-???}' bytes):'; \
${ECHO} '#'; \
${ECHO} 'unsorted_sites="${SITES_${fetchfile:T:S/=/--/}} ${_MASTER_SITE_BACKUP}"'; \
${ECHO} sites='"'${ORDERED_SITES:Q}'"'; \
${ECHO} "${MKDIR} ${_DISTDIR}"; \
${ECHO} 'cd ${_DISTDIR} && [ -f ${fetchfile} -o -f ${fetchfile:T} ] ||'; \
${ECHO} 'for site in $$sites; do'; \
${ECHO} ' ${FETCH_CMD} ${FETCH_BEFORE_ARGS} "$${site}${fetchfile:T}" ${FETCH_AFTER_ARGS} && break ||'; \
${ECHO} ' ${ECHO} ${fetchfile} not fetched'; \
${ECHO} done; \
fi)
. endif # defined(_FETCH_MESSAGE) || defined(DYNAMIC_MASTER_SITES)
. endfor
. endif # !empty(_ALLFILES)
.endif # !target(fetch-list-one-pkg)
# Checksumming utilities
.PHONY: makesum
.if !target(makesum)
makesum: fetch uptodate-digest
${_PKG_SILENT}${_PKG_DEBUG} \
newfile=${DISTINFO_FILE}.$$$$; \
if [ -f ${DISTINFO_FILE} ]; then \
${GREP} '^.NetBSD' ${DISTINFO_FILE} > $$newfile || \
(${ECHO} -n "$$" > $$newfile && \
${ECHO} -n "NetBSD" >> $$newfile && \
${ECHO} "$$" >> $$newfile) \
else \
${ECHO} -n "$$" > $$newfile; \
${ECHO} -n "NetBSD" >> $$newfile; \
${ECHO} "$$" >> $$newfile; \
fi; \
${ECHO} "" >> $$newfile; \
cd ${DISTDIR}; \
for sumfile in "" ${_CKSUMFILES}; do \
if [ "X$$sumfile" = "X" ]; then continue; fi; \
${DIGEST} ${DIGEST_ALGORITHM} $$sumfile >> $$newfile; \
${WC} -c $$sumfile | ${AWK} '{ print "Size (" $$2 ") = " $$1 " bytes" }' >> $$newfile; \
done; \
for ignore in "" ${_IGNOREFILES}; do \
if [ "X$$ignore" = "X" ]; then continue; fi; \
${ECHO} "${DIGEST_ALGORITHM} ($$ignore) = IGNORE" >> $$newfile; \
done; \
if [ -f ${DISTINFO_FILE} ]; then \
${AWK} '$$2 ~ /\(patch-[a-z0-9]+\)/ { print $$0 }' < ${DISTINFO_FILE} >> $$newfile; \
fi; \
if ${CMP} -s $$newfile ${DISTINFO_FILE}; then \
${RM} -f $$newfile; \
${ECHO_MSG} "=> distinfo: distfiles part unchanged."; \
else \
${MV} $$newfile ${DISTINFO_FILE}; \
fi
.endif
.if !target(makepatchsum)
makepatchsum mps: uptodate-digest
${_PKG_SILENT}${_PKG_DEBUG} \
newfile=${DISTINFO_FILE}.$$$$; \
if [ -f ${DISTINFO_FILE} ]; then \
${AWK} '$$2 !~ /\(patch-[a-z0-9]+\)/ { print $$0 }' < ${DISTINFO_FILE} >> $$newfile; \
else \
${ECHO} -n "$$" > $$newfile; \
${ECHO} -n "NetBSD" >> $$newfile; \
${ECHO} "$$" >> $$newfile; \
${ECHO} "" >> $$newfile; \
fi; \
if [ -d ${PATCHDIR} ]; then \
(cd ${PATCHDIR}; \
for sumfile in "" patch-*; do \
if [ "X$$sumfile" = "X" ]; then continue; fi; \
if [ "X$$sumfile" = "Xpatch-*" ]; then break; fi; \
case $$sumfile in \
patch-local-*) ;; \
*.orig|*.rej|*~) continue ;; \
*) ${ECHO} "${DIGEST_ALGORITHM} ($$sumfile) = `${SED} -e '/\$$NetBSD.*/d' $$sumfile | ${DIGEST} ${DIGEST_ALGORITHM}`" >> $$newfile;; \
esac; \
done); \
fi; \
if ${CMP} -s $$newfile ${DISTINFO_FILE}; then \
${RM} -f $$newfile; \
${ECHO_MSG} "=> distinfo: patches part unchanged."; \
else \
${MV} $$newfile ${DISTINFO_FILE}; \
fi
.endif
# This target is done by invoking a sub-make so that DISTINFO_FILE gets
# re-evaluated after the "makepatchsum" target is made. This can be
# made into:
#makedistinfo mdi: makepatchsum makesum
# once a combined distinfo file exists for all packages
.if !target(makedistinfo)
makedistinfo mdi distinfo: makepatchsum
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} makesum
.endif
.PHONY: checksum
.if !target(checksum)
checksum: fetch uptodate-digest
${_PKG_SILENT}${_PKG_DEBUG} \
if [ ! -f ${DISTINFO_FILE} ]; then \
${ECHO_MSG} "=> No checksum file."; \
else \
(cd ${DISTDIR}; OK="true"; \
for file in "" ${_CKSUMFILES}; do \
if [ "X$$file" = X"" ]; then continue; fi; \
alg=`${AWK} 'NF == 4 && $$2 == "('$$file')" && $$3 == "=" {print $$1;}' ${DISTINFO_FILE}`; \
if [ "X$$alg" = "X" ]; then \
${ECHO_MSG} "=> No checksum recorded for $$file."; \
OK="false"; \
else \
CKSUM=`${DIGEST} $$alg < $$file`; \
CKSUM2=`${AWK} '$$1 == "'$$alg'" && $$2 == "('$$file')"{print $$4;}' ${DISTINFO_FILE}`; \
if [ "$$CKSUM2" = "IGNORE" ]; then \
${ECHO_MSG} "=> Checksum for $$file is set to IGNORE in checksum file even though"; \
${ECHO_MSG} " the file is not in the "'$$'"{IGNOREFILES} list."; \
OK="false"; \
elif [ "$$CKSUM" = "$$CKSUM2" ]; then \
${ECHO_MSG} "=> Checksum OK for $$file."; \
else \
${ECHO_MSG} "=> Checksum mismatch for $$file."; \
OK="false"; \
fi; \
fi; \
done; \
for file in "" ${_IGNOREFILES}; do \
if [ "X$$file" = X"" ]; then continue; fi; \
CKSUM2=`${AWK} 'NF == 4 && $$3 == "=" && $$2 == "('$$file')"{print $$4;}' ${DISTINFO_FILE}`; \
if [ "$$CKSUM2" = "" ]; then \
${ECHO_MSG} "=> No checksum recorded for $$file, file is in "'$$'"{IGNOREFILES} list."; \
OK="false"; \
elif [ "$$CKSUM2" != "IGNORE" ]; then \
${ECHO_MSG} "=> Checksum for $$file is not set to IGNORE in checksum file even though"; \
${ECHO_MSG} " the file is in the "'$$'"{IGNOREFILES} list."; \
OK="false"; \
fi; \
done; \
if [ "$$OK" != "true" ]; then \
${ECHO_MSG} "Make sure the Makefile and checksum file (${DISTINFO_FILE})"; \
${ECHO_MSG} "are up to date. If you want to override this check, type"; \
${ECHO_MSG} "\"${MAKE} NO_CHECKSUM=yes [other args]\"."; \
exit 1; \
fi) ; \
fi
.endif
# List of sites carrying binary pkgs. Variables "rel" and "arch" are
# replaced with OS release ("1.5", ...) and architecture ("mipsel", ...)
BINPKG_SITES?= \
ftp://ftp.NetBSD.org/pub/NetBSD/packages/$${rel}/$${arch}
# List of flags to pass to pkg_add(1) for bin-install:
BIN_INSTALL_FLAGS?= # -v
.if ${PKG_INSTALLATION_TYPE} == "pkgviews"
PKG_ARGS_ADD= -W ${LOCALBASE} -w ${DEFAULT_VIEW}
.endif
_BIN_INSTALL_FLAGS= ${BIN_INSTALL_FLAGS}
_BIN_INSTALL_FLAGS+= ${PKG_ARGS_ADD}
# Install binary pkg, without strict uptodate-check first
.PHONY: real-su-bin-install
real-su-bin-install:
@found="`${PKG_BEST_EXISTS} \"${PKGWILDCARD}\" || ${TRUE}`"; \
if [ "$$found" != "" ]; then \
${ECHO_MSG} "${_PKGSRC_IN}> $$found is already installed - perhaps an older version?"; \
${ECHO_MSG} "*** If so, you may wish to \`\`pkg_delete $$found'' and install"; \
${ECHO_MSG} "*** this package again by \`\`${MAKE} bin-install'' to upgrade it properly."; \
${SHCOMMENT} ${ECHO_MSG} "*** or use \`\`${MAKE} bin-update'' to upgrade it and all of its dependencies."; \
exit 1; \
fi
@if [ -f ${PKGFILE} ] ; then \
${ECHO_MSG} "Installing from binary pkg ${PKGFILE}" ; \
${PKG_ADD} ${_BIN_INSTALL_FLAGS} ${PKGFILE} ; \
else \
rel=`${UNAME} -r | ${SED} 's@\.\([0-9]*\)[\._].*@\.\1@'`; \
arch=${MACHINE_ARCH}; \
for site in ${BINPKG_SITES} ; do \
${ECHO} Trying `eval ${ECHO} $$site`/All ; \
${SHCOMMENT} ${ECHO} ${SETENV} PKG_PATH="`eval ${ECHO} $$site`/All" ${PKG_ADD} ${_BIN_INSTALL_FLAGS} ${PKGNAME}${PKG_SUFX} ; \
if ${SETENV} PKG_PATH="`eval ${ECHO} $$site`/All" ${PKG_ADD} ${BIN_INSTALL_FLAGS} ${PKGNAME}${PKG_SUFX} ; then \
${ECHO} "${PKGNAME} successfully installed."; \
break ; \
fi ; \
done ; \
if ! ${PKG_INFO} -qe "${PKGNAME}" ; then \
${SHCOMMENT} Cycle through some FTP server here ;\
${ECHO_MSG} "Installing from source" ; \
${MAKE} ${MAKEFLAGS} package \
DEPENDS_TARGET=${DEPENDS_TARGET} && \
${MAKE} ${MAKEFLAGS} clean ; \
fi ; \
fi
.PHONY: bin-install
bin-install:
@${ECHO_MSG} "${_PKGSRC_IN}> Binary install for ${PKGNAME}"
${_PKG_SILENT}${_PKG_DEBUG} \
realtarget="real-su-bin-install"; \
action="binary install"; \
${_SU_TARGET}
################################################################
# The special package-building targets
# You probably won't need to touch these
################################################################
# Set to "html" by the README.html target to generate HTML code,
# or to "svr4" to print SVR4 (Solaris, ...) short package names, from
# SVR4_PKGNAME variable.
# This variable is passed down via build-depends-list and run-depends-list
PACKAGE_NAME_TYPE?= name
# Nobody should want to override this unless PKGNAME is simply bogus.
HTML_PKGNAME=<a href="../../${PKGPATH:S/&/\&/g:S/>/\>/g:S/</\</g}/README.html">${PKGNAME:S/&/\&/g:S/>/\>/g:S/</\</g}</A>
.PHONY: package-name
.if !target(package-name)
package-name:
. if (${PACKAGE_NAME_TYPE} == "html")
@${ECHO} '<a href="../../${PKGPATH:S/&/\&/g:S/>/\>/g:S/</\</g}/README.html">${PKGNAME:S/&/\&/g:S/>/\>/g:S/</\</g}</A>'
. elif (${PACKAGE_NAME_TYPE} == "svr4")
@${ECHO} ${SVR4_PKGNAME}
. else
@${ECHO} ${PKGNAME}
. endif # PACKAGE_NAME_TYPE
.endif # !target(package-name)
.PHONY: make-readme-html-help
.if !target(make-readme-html-help)
make-readme-html-help:
@${ECHO} '${PKGNAME:S/&/\&/g:S/>/\>/g:S/</\</g}</a>: <TD>'${COMMENT:S/&/\&/g:S/>/\>/g:S/</\</g:Q}
.endif # !target(make-readme-html-help)
# Show (recursively) all the packages this package depends on.
# If PACKAGE_DEPENDS_WITH_PATTERNS is set, print as pattern (if possible)
PACKAGE_DEPENDS_WITH_PATTERNS?=true
# To be used (-> true) ONLY if the pkg in question is known to be installed
# (i.e. when calling for pkg_create args, and for fake-pkg)
# Will probably not work with PACKAGE_DEPENDS_WITH_PATTERNS=false ...
PACKAGE_DEPENDS_QUICK?=false
.PHONY: run-depends-list
.if !target(run-depends-list)
run-depends-list:
. for dep in ${DEPENDS}
@pkg="${dep:C/:.*//}"; \
dir="${dep:C/[^:]*://}"; \
cd ${.CURDIR}; \
if ${PACKAGE_DEPENDS_WITH_PATTERNS}; then \
${ECHO} "$$pkg"; \
else \
if cd $$dir 2>/dev/null; then \
${MAKE} ${MAKEFLAGS} package-name PACKAGE_NAME_TYPE=${PACKAGE_NAME_TYPE}; \
else \
${ECHO_MSG} "Warning: \"$$dir\" non-existent -- @pkgdep registration incomplete" >&2; \
fi; \
fi; \
if ${PACKAGE_DEPENDS_QUICK}; then \
found=`${PKG_BEST_EXISTS} "$$pkg"`; \
${PKG_INFO} -qf "$$found" | ${AWK} '/^@pkgdep/ {print $$2}'; \
else \
if cd $$dir 2>/dev/null; then \
${MAKE} ${MAKEFLAGS} run-depends-list PACKAGE_NAME_TYPE=${PACKAGE_NAME_TYPE} PACKAGE_DEPENDS_WITH_PATTERNS=${PACKAGE_DEPENDS_WITH_PATTERNS}; \
else \
${ECHO_MSG} "Warning: \"$$dir\" non-existent -- @pkgdep registration incomplete" >&2; \
fi; \
fi
. endfor
.endif # target(run-depends-list)
# Build a package but don't check the package cookie
.PHONY: repackage
.if !target(repackage)
repackage: pre-repackage package
.PHONY: pre-repackage
pre-repackage:
${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${PACKAGE_COOKIE}
.endif
# Build a package but don't check the cookie for installation, also don't
# install package cookie
.PHONY: package-noinstall
.if !target(package-noinstall)
package-noinstall:
${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} PACKAGE_NOINSTALL=yes real-package
.endif
################################################################
# Dependency checking
################################################################
.PHONY: install-depends
.if !target(install-depends)
# Tells whether to halt execution if the object formats differ
FATAL_OBJECT_FMT_SKEW?= yes
WARN_NO_OBJECT_FMT?= yes
install-depends: uptodate-pkgtools
. if defined(DEPENDS) || defined(BUILD_DEPENDS)
. if defined(NO_DEPENDS)
@${DO_NADA}
. else # !DEPENDS
. for dep in ${DEPENDS} ${BUILD_DEPENDS}
${_PKG_SILENT}${_PKG_DEBUG} \
pkg="${dep:C/:.*//}"; \
dir="${dep:C/[^:]*://:C/:.*$//}"; \
found=`${PKG_BEST_EXISTS} "$$pkg" || ${TRUE}`; \
if [ "X$$REBUILD_DOWNLEVEL_DEPENDS" != "X" ]; then \
pkgname=`cd $$dir ; ${MAKE} ${MAKEFLAGS} show-var VARNAME=PKGNAME`; \
if [ "X$$found" != "X" -a "X$$found" != "X$${pkgname}" ]; then \
${ECHO_MSG} "ignoring old installed package \"$$found\""; \
found=""; \
fi; \
fi; \
if [ "$$found" != "" ]; then \
instobjfmt=`${PKG_INFO} -B "$$found" | ${AWK} -F'=[ \t]*' '/^OBJECT_FMT/ {print $$2; exit}'`; \
if [ "$$instobjfmt" = "" ]; then \
if [ "X${WARN_NO_OBJECT_FMT}" != "Xno" ]; then \
${ECHO} "WARNING: Unknown object format for installed package $$found - continuing"; \
fi; \
elif [ "$$instobjfmt" != "${OBJECT_FMT}" ]; then \
${ECHO} "Installed package $$found is an $$instobjfmt package."; \
${ECHO} "You are building an ${OBJECT_FMT} package, which will not inter-operate."; \
${ECHO} "Please update the $$found package to ${OBJECT_FMT}"; \
if [ "X${FATAL_OBJECT_FMT_SKEW}" != "Xno" ]; then \
exit 1; \
fi; \
fi; \
${ECHO_MSG} "${_PKGSRC_IN}> Required installed package $$pkg: $${found} found"; \
else \
${ECHO_MSG} "${_PKGSRC_IN}> Required package $$pkg: NOT found"; \
target=${DEPENDS_TARGET}; \
${ECHO_MSG} "${_PKGSRC_IN}> Verifying $$target for $$dir"; \
if [ ! -d $$dir ]; then \
${ECHO_MSG} "=> No directory for $$dir. Skipping.."; \
else \
cd $$dir ; \
${SETENV} _PKGSRC_DEPS=", ${PKGNAME}${_PKGSRC_DEPS}" ${MAKE} ${MAKEFLAGS} $$target PKGNAME_REQD=\'$$pkg\'; \
${ECHO_MSG} "${_PKGSRC_IN}> Returning to build of ${PKGNAME}"; \
fi; \
fi
. endfor # DEPENDS
. endif # !NO_DEPENDS
. endif # DEPENDS
.endif
.PHONY: build-depends-list
.if !target(build-depends-list)
build-depends-list:
@for dir in `${MAKE} ${MAKEFLAGS} show-all-depends-dirs-excl`; \
do \
(cd ../../$$dir && \
${MAKE} ${MAKEFLAGS} package-name) \
done
.endif
# If PACKAGES is set to the default (../../pkgsrc/packages), the current
# ${MACHINE_ARCH} and "release" (uname -r) will be used. Otherwise a directory
# structure of ...pkgsrc/packages/`uname -r`/${MACHINE_ARCH} is assumed.
# The PKG_URL is set from FTP_PKG_URL_* or CDROM_PKG_URL_*, depending on
# the target used to generate the README.html file.
.PHONY: binpkg-list
.if !target(binpkg-list)
binpkg-list:
@if [ -e ${PACKAGES} ]; then \
cd ${PACKAGES}; \
case ${.CURDIR} in \
*/pkgsrc/packages) \
for pkg in ${PKGREPOSITORYSUBDIR}/${PKGWILDCARD}${PKG_SUFX} ; \
do \
if [ -f "$$pkg" ] ; then \
pkgname=`${ECHO} $$pkg | ${SED} 's@.*/@@'`; \
${ECHO} "<TR><TD>${MACHINE_ARCH}:<TD><a href=\"${PKG_URL}/$$pkg\">$$pkgname</a><TD>(${OPSYS} ${OS_VERSION})"; \
fi ; \
done ; \
;; \
*) \
cd ${PACKAGES}/../..; \
for i in [1-9].*/*; do \
if cd ${PACKAGES}/../../$$i/${PKGREPOSITORYSUBDIR} 2>/dev/null; then \
for j in ${PKGWILDCARD}${PKG_SUFX}; \
do \
if [ -f "$$j" ]; then \
${ECHO} $$i/$$j;\
fi; \
done; \
fi; \
done | ${AWK} -F/ ' \
{ \
release = $$1; \
arch = $$2; \
pkg = $$3; \
gsub("\\.tgz","", pkg); \
if (arch != "m68k" && arch != "mipsel") { \
if (arch in urls) \
urls[arch "/" pkg "/" release] = "<a href=\"${PKG_URL}/" release "/" arch "/${PKGREPOSITORYSUBDIR}/" pkg "${PKG_SUFX}\">" pkg "</a>, " urls[arch]; \
else \
urls[arch "/" pkg "/" release] = "<a href=\"${PKG_URL}/" release "/" arch "/${PKGREPOSITORYSUBDIR}/" pkg "${PKG_SUFX}\">" pkg "</a> "; \
} \
} \
END { \
for (av in urls) { \
split(av, ava, "/"); \
arch=ava[1]; \
pkg=ava[2]; \
release=ava[3]; \
print "<TR><TD>" arch ":<TD>" urls[av] "<TD>(${OPSYS} " release ")"; \
} \
}' | ${SORT} \
;; \
esac; \
fi
.endif
################################################################
# Everything after here are internal targets and really
# shouldn't be touched by anybody but the release engineers.
################################################################
# This target generates an index entry suitable for aggregation into
# a large index. Format is:
#
# distribution-name|package-path|installation-prefix|comment| \
# description-file|maintainer|categories|build deps|run deps|for arch| \
# not for opsys
#
.PHONY: describe
.if !target(describe)
describe:
@${ECHO} -n "${PKGNAME}|${.CURDIR}|"; \
${ECHO} -n "${PREFIX}|"; \
${ECHO} -n ${COMMENT:Q}; \
if [ -f ${DESCR_SRC} ]; then \
${ECHO} -n "|${DESCR_SRC}"; \
else \
${ECHO} -n "|/dev/null"; \
fi; \
${ECHO} -n "|${MAINTAINER}|${CATEGORIES}|"; \
case "A${BUILD_DEPENDS}B${DEPENDS}C" in \
ABC) ;; \
*) cd ${.CURDIR} && ${ECHO} -n `${MAKE} ${MAKEFLAGS} build-depends-list | ${SORT} -u`;; \
esac; \
${ECHO} -n "|"; \
if [ "${DEPENDS}" != "" ]; then \
cd ${.CURDIR} && ${ECHO} -n `${MAKE} ${MAKEFLAGS} run-depends-list | ${SORT} -u`; \
fi; \
${ECHO} -n "|"; \
if [ "${ONLY_FOR_ARCHS}" = "" ]; then \
${ECHO} -n "any"; \
else \
${ECHO} -n "${ONLY_FOR_ARCHS}"; \
fi; \
${ECHO} -n "|"; \
if [ "${NOT_FOR_OPSYS}" = "" ]; then \
${ECHO} -n "any"; \
else \
${ECHO} -n "not ${NOT_FOR_OPSYS}"; \
fi; \
${ECHO} ""
.endif
.PHONY: readmes
.if !target(readmes)
readmes: readme
.endif
# This target is used to generate README.html files
.PHONY: readme
.if !target(readme)
FTP_PKG_URL_HOST?= ftp://ftp.NetBSD.org
FTP_PKG_URL_DIR?= /pub/NetBSD/packages
readme:
@cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} README.html PKG_URL=${FTP_PKG_URL_HOST}${FTP_PKG_URL_DIR}
.endif
# This target is used to generate README.html files, very like "readme"
# However, a different target was used for ease of use.
.PHONY: cdrom-readme
.if !target(cdrom-readme)
CDROM_PKG_URL_HOST?= file://localhost
CDROM_PKG_URL_DIR?= /usr/pkgsrc/packages
cdrom-readme:
@cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} README.html PKG_URL=${CDROM_PKG_URL_HOST}${CDROM_PKG_URL_DIR}
.endif
README_NAME= ${TEMPLATES}/README.pkg
# set up the correct license information as a sed expression
.ifdef LICENSE
SED_LICENSE_EXPR= -e 's|%%LICENSE%%|<p>Please note that this package has a ${LICENSE} license.</p>|'
.else
SED_LICENSE_EXPR= -e 's|%%LICENSE%%||'
.endif
# set up the "more info URL" information as a sed expression
.ifdef HOMEPAGE
SED_HOMEPAGE_EXPR= -e 's|%%HOMEPAGE%%|<p>This package has a home page at <a HREF="${HOMEPAGE}">${HOMEPAGE}</a>.</p>|'
.else
SED_HOMEPAGE_EXPR= -e 's|%%HOMEPAGE%%||'
.endif
.PHONY: show-vulnerabilities-html
show-vulnerabilities-html:
${_PKG_SILENT}${_PKG_DEBUG} \
if [ -f ${PKGVULNDIR}/pkg-vulnerabilities ]; then \
${AWK} '/^${PKGBASE}[-<>=]+[0-9]/ { gsub("\<", "\\<", $$1); \
gsub("\>", "\\>", $$1); \
printf("<LI><STRONG>%s has a %s exploit (see <a href=\"%s\">%s</a> for more details)</STRONG></LI>\n", $$1, $$2, $$3, $$3) }' \
${PKGVULNDIR}/pkg-vulnerabilities; \
fi
# If PACKAGES is set to the default (../../packages), the current
# ${MACHINE_ARCH} and "release" (uname -r) will be used. Otherwise a directory
# structure of ...pkgsrc/packages/`uname -r`/${MACHINE_ARCH} is assumed.
# The PKG_URL is set from FTP_PKG_URL_* or CDROM_PKG_URL_*, depending on
# the target used to generate the README.html file.
.PHONY: README.html
README.html: .PRECIOUS
@${SETENV} AWK=${AWK} BMAKE=${MAKE} ../../mk/scripts/mkdatabase -f $@.tmp1
@if [ -e ${PACKAGES} ]; then \
cd ${PACKAGES}; \
case `${PWD_CMD}` in \
${_PKGSRCDIR}/packages) \
MULTIARCH=no; \
;; \
*) \
MULTIARCH=yes; \
;; \
esac; \
cd ${.CURDIR} ; \
fi; \
${AWK} -f ../../mk/scripts/genreadme.awk \
builddependsfile=/dev/null \
dependsfile=/dev/null \
DISTDIR=${DISTDIR} \
MACHINE_ARCH=${MACHINE_ARCH} \
MULTIARCH=$$MULTIARCH \
OPSYS=${OPSYS} \
OS_VERSION=${OS_VERSION} \
PACKAGES=${PACKAGES} \
PKG_SUFX=${PKG_SUFX} \
PKG_URL=${PKG_URL} \
PKGREPOSITORYSUBDIR=${PKGREPOSITORYSUBDIR} \
PKGSRCDIR=${.CURDIR:C|/[^/]*/[^/]*$||} \
TMPDIR=${TMPDIR:U/tmp} \
SINGLEPKG=${PKGPATH} \
$@.tmp1
@${RM} $@.tmp1
.PHONY: show-pkgtools-version
.if !target(show-pkgtools-version)
show-pkgtools-version:
@${ECHO} ${PKGTOOLS_VERSION}
.endif
# convenience target, to display make variables from command line
# i.e. "make show-var VARNAME=var", will print var's value
.PHONY: show-var
show-var:
@${ECHO} ${${VARNAME}:Q}
# enhanced version of target above, to display multiple variables
.PHONY: show-vars
show-vars:
.for VARNAME in ${VARNAMES}
@${ECHO} ${${VARNAME}:Q}
.endfor
.PHONY: print-build-depends-list
.if !target(print-build-depends-list)
print-build-depends-list:
. if defined(BUILD_DEPENDS) || defined(DEPENDS)
@${ECHO} -n 'This package requires package(s) "'
@${ECHO} -n `${MAKE} ${MAKEFLAGS} build-depends-list | ${SORT} -u`
@${ECHO} '" to build.'
. endif
.endif
.PHONY: print-run-depends-list
.if !target(print-run-depends-list)
print-run-depends-list:
. if defined(DEPENDS)
@${ECHO} -n 'This package requires package(s) "'
@${ECHO} -n `${MAKE} ${MAKEFLAGS} run-depends-list | ${SORT} -u`
@${ECHO} '" to run.'
. endif
.endif
# This target is used by the mk/scripts/mkreadme script to generate
# README.html files
.PHONY: print-summary-data
.if !target(print-summary-data)
print-summary-data:
@${ECHO} "depends ${PKGPATH} ${DEPENDS}"
@${ECHO} "build_depends ${PKGPATH} ${BUILD_DEPENDS}"
@${ECHO} "conflicts ${PKGPATH} ${CONFLICTS}"
@${ECHO} "index ${PKGPATH} ${PKGNAME}"
@${ECHO} htmlname ${PKGPATH} ${HTML_PKGNAME:Q}
@${ECHO} homepage ${PKGPATH} ${HOMEPAGE:Q}
@${ECHO} wildcard ${PKGPATH} ${PKGWILDCARD:Q}
@${ECHO} comment ${PKGPATH} ${COMMENT:Q}
@${ECHO} license ${PKGPATH} ${LICENSE:Q}
@if [ "${ONLY_FOR_ARCHS}" = "" ]; then \
${ECHO} "onlyfor ${PKGPATH} any"; \
else \
${ECHO} "onlyfor ${PKGPATH} ${ONLY_FOR_ARCHS}"; \
fi;
@if [ "${NOT_FOR_OPSYS}" = "" ]; then \
${ECHO} "notfor ${PKGPATH} any"; \
else \
${ECHO} "notfor ${PKGPATH} not ${NOT_FOR_OPSYS}"; \
fi;
@${ECHO} "maintainer ${PKGPATH} ${MAINTAINER}"
@${ECHO} "categories ${PKGPATH} ${CATEGORIES}"
@if [ -f ${DESCR_SRC} ]; then \
${ECHO} "descr ${PKGPATH} ${DESCR_SRC:S;${_PKGSRCDIR}/;;g}"; \
else \
${ECHO} "descr ${PKGPATH} /dev/null"; \
fi
@${ECHO} "prefix ${PKGPATH} ${PREFIX}"
.endif
.if !target(show-license)
show-license show-licence:
@if [ "${LICENSE}" != "" ]; then \
if [ -e ${_PKGSRCDIR}/licenses/${LICENSE} ]; then \
if [ "${PAGER}" != "" ]; then \
${PAGER} ${_PKGSRCDIR}/licenses/${LICENSE};\
else \
${CAT} ${_PKGSRCDIR}/licenses/${LICENSE};\
fi \
else \
${ECHO} "Generic ${LICENSE} information not available"; \
${ECHO} "See the package description (pkg_info -d ${PKGNAME}) for more information."; \
fi \
fi
.endif
# Stat all the files of one pkg and sum the sizes up.
#
# XXX This is intended to be run before pkg_create is called, so the
# existence of ${PLIST} can be assumed.
.PHONY: print-pkg-size-this
print-pkg-size-this:
@${SHCOMMENT} "This pkg's files" ; \
${AWK} 'BEGIN { base = "${PREFIX}/" } \
/^@cwd/ { base = $$2 "/" } \
/^@/ { next } \
{ print base $$0 }' \
<${PLIST} \
| ${SORT} -u \
| ${SED} -e "s/'/'\\\\''/g" -e "s/.*/'&'/" \
| ${XARGS} -n 256 ${LS} -ld \
| ${AWK} 'BEGIN { print("0 "); } \
{ print($$5, " + "); } \
END { print("p"); }' \
| ${DC}
# Sizes of required pkgs (only)
#
# XXX This is intended to be run before pkg_create is called, so the
# dependencies are all installed.
.PHONY: print-pkg-size-depends
print-pkg-size-depends:
@${MAKE} ${MAKEFLAGS} run-depends-list PACKAGE_DEPENDS_QUICK=true \
| ${XARGS} -n 1 ${SETENV} ${PKG_BEST_EXISTS} \
| ${SORT} -u \
| ${XARGS} -n 256 ${SETENV} ${PKG_INFO} -qs \
| ${AWK} -- 'BEGIN { print("0 "); } \
/^[0-9]+$$/ { print($$1, " + "); } \
END { print("p"); }' \
| ${DC}
###
### Automatic PLIST generation
### - files & symlinks first
### - @dirrm statements last
### - empty directories are handled properly
### - dirs from mtree files are excluded
### - substitute for platform or package specifics substrings
###
### Usage:
### - make install
### - make print-PLIST | brain >PLIST
###
_PRINT_PLIST_AWK_SUBST={ \
gsub(/${OPSYS}/, "$${OPSYS}"); \
gsub(/${OS_VERSION:S/./\./g}/, "$${OS_VERSION}"); \
gsub(/${MACHINE_GNU_PLATFORM}/, "$${MACHINE_GNU_PLATFORM}"); \
gsub(/${MACHINE_ARCH}/, "$${MACHINE_ARCH}"); \
gsub(/${MACHINE_GNU_ARCH}/, "$${MACHINE_GNU_ARCH}");
.if !empty(LOWER_VENDOR)
_PRINT_PLIST_AWK_SUBST+= gsub(/${LOWER_VENDOR}/, "$${LOWER_VENDOR}");
.endif
_PRINT_PLIST_AWK_SUBST+= \
gsub(/${LOWER_OS_VERSION:S/./\./g}/, "$${LOWER_OS_VERSION}"); \
gsub(/${LOWER_OPSYS}/, "$${LOWER_OPSYS}"); \
gsub(/${PKGNAME_NOREV}/, "$${PKGNAME}"); \
gsub(/${PKGVERSION:S/./\./g:C/nb[0-9]*$$//}/, "$${PKGVERSION}");\
gsub(/${PKGLOCALEDIR}\/locale/, "$${PKGLOCALEDIR}/locale"); \
}
_PRINT_PLIST_AWK_IGNORE= ($$0 ~ /emul\/linux\/proc/)
_PRINT_PLIST_AWK_IGNORE+= || ($$0 ~ /^info\/dir$$/)
.if defined(INFO_DIR) && empty(INFO_DIR:Minfo)
_PRINT_PLIST_AWK_IGNORE+= || ($$0 ~ /^${INFO_DIR:S|/|\\/|g}\/dir$$/)
.endif
.if !empty(INFO_FILES)
. for _f_ in ${INFO_FILES}
_PRINT_PLIST_AWK_IGNORE+= || ($$0 ~ /^${INFO_DIR:S|/|\\/|g}\/${_f_:S|+|\+|g}(-[0-9]+)?(\.gz)?$$/)
. endfor
.endif
# Common (system) directories not to generate @dirrm statements for
# Reads MTREE_FILE and generate awk statements that will
# sort out which directories NOT to include into the PLIST @dirrm list
.if make(print-PLIST)
_PRINT_PLIST_COMMON_DIRS!= ${AWK} 'BEGIN { \
i=0; \
stack[i]="${PREFIX}" ; \
cwd=""; \
} \
! ( /^\// || /^\#/ || /^$$/ ) { \
if ( $$1 == ".." ){ \
i=i-1; \
cwd = stack[i]; \
} else if ( $$1 == "." ){ \
} else { \
stack[i] = cwd ; \
if ( i == 0 ){ \
cwd = $$1 ; \
} else { \
cwd = cwd "\\/" $$1 ; \
} \
print "/^" cwd "$$$$/ { next; }"; \
i=i+1 ; \
} \
} \
END { print "{ print $$$$0; }"; } \
' <${MTREE_FILE}
.endif
# scan $PREFIX for any files/dirs modified since the package was extracted
# will emit "@exec mkdir"-statements for empty directories
# XXX will fail for data files that were copied using tar (e.g. emacs)!
# XXX should check $LOCALBASE and $X11BASE, and add @cwd statements
.PHONY: print-PLIST
.if !target(print-PLIST)
print-PLIST:
${_PKG_SILENT}${_PKG_DEBUG}\
${ECHO} '@comment $$'NetBSD'$$'
${_PKG_SILENT}${_PKG_DEBUG}\
shlib_type=`${MAKE} ${MAKEFLAGS} show-shlib-type`; \
case $$shlib_type in \
"a.out") genlinks=1 ;; \
*) genlinks=0 ;; \
esac; \
${FIND} ${PREFIX}/. -xdev -newer ${EXTRACT_COOKIE} \! -type d -print\
| ${SORT} \
| ${AWK} ' \
{ sub("${PREFIX}/\\./", ""); } \
${_PRINT_PLIST_AWK_IGNORE} { next; } \
${_PRINT_PLIST_AWK_SUBST} \
/^@/ { print $$0; next } \
/.*\/lib[^\/]+\.so\.[0-9]+\.[0-9]+\.[0-9]+$$/ { \
print $$0; \
sub("\\.[0-9]+$$", ""); \
if ('$$genlinks') print $$0; \
sub("\\.[0-9]+$$", ""); \
if ('$$genlinks') print $$0; \
sub("\\.[0-9]+$$", ""); \
if ('$$genlinks') print $$0; \
next; \
} \
/.*\/lib[^\/]+\.so\.[0-9]+\.[0-9]+$$/ { \
print $$0; \
sub("\\.[0-9]+$$", ""); \
if ('$$genlinks') print $$0; \
sub("\\.[0-9]+$$", ""); \
if ('$$genlinks') print $$0; \
next; \
} \
{ print $$0; }'
${_PKG_SILENT}${_PKG_DEBUG}\
for i in `${FIND} ${PREFIX}/. -xdev -newer ${EXTRACT_COOKIE} -type d -print\
| ${SORT} -r \
| ${AWK} ' \
/emul\/linux\/proc/ { next; } \
/${PREFIX:S|/|\\/|g}\/\.$$/ { next; } \
{ sub("${PREFIX}/\\\\./", ""); } \
${_PRINT_PLIST_COMMON_DIRS}'` ; \
do \
if [ `${LS} -la ${PREFIX}/$$i | ${WC} -l` = 3 ]; then \
${ECHO} @exec \$${MKDIR} %D/$$i ; \
fi ; \
${ECHO} @dirrm $$i ; \
done \
| ${AWK} '${_PRINT_PLIST_AWK_SUBST} { print $$0; }'
.endif # target(print-PLIST)
# By default, all packages attempt to link into the views.
.if ${PKG_INSTALLATION_TYPE} == "pkgviews"
BUILD_VIEWS?= yes
.endif
# DEFAULT_VIEW.${PKGBASE} default view for ${PKGBASE}
# VIEWBASE base location of files at run-time
#
DEFAULT_VIEW.${PKGBASE}?= ${DEFAULT_VIEW}
.if ${PKG_INSTALLATION_TYPE} == "pkgviews"
. if empty(DEFAULT_VIEW.${PKGBASE}:M"")
VIEWBASE= ${LOCALBASE}/${DEFAULT_VIEW.${PKGBASE}}
. else
VIEWBASE= ${LOCALBASE}
. endif
.elif ${PKG_INSTALLATION_TYPE} == "overwrite"
VIEWBASE= ${PREFIX}
.endif
MAKE_ENV+= VIEWBASE=${VIEWBASE}
PKGVIEWS+= ${DEFAULT_VIEW.${PKGBASE}}
# Fake installation of package so that user can pkg_delete it later.
# Also, make sure that an installed package is recognized correctly in
# accordance to the @pkgdep directive in the packing lists.
.PHONY: fake-pkg
.if !target(fake-pkg)
fake-pkg: ${PLIST} ${DESCR} ${MESSAGE}
${_PKG_SILENT}${_PKG_DEBUG} \
if [ ! -f ${PLIST} -o ! -f ${DESCR} ]; then \
${ECHO} "** Missing package files for ${PKGNAME} - installation not recorded."; \
exit 1; \
fi
${_PKG_SILENT}${_PKG_DEBUG} \
if [ ! -d ${_PKG_DBDIR} ]; then \
${RM} -f ${_PKG_DBDIR}; \
${MKDIR} ${_PKG_DBDIR}; \
fi
. if defined(FORCE_PKG_REGISTER)
${_PKG_SILENT}${_PKG_DEBUG}${PKG_ADMIN} delete ${PKGNAME}
. if ${PKG_INSTALLATION_TYPE} == "overwrite"
${_PKG_SILENT}${_PKG_DEBUG}${RM} -rf ${_PKG_DBDIR}/${PKGNAME}
. endif
. endif
${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${BUILD_VERSION_FILE} ${BUILD_INFO_FILE}
${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${SIZE_PKG_FILE} ${SIZE_ALL_FILE}
${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${PRESERVE_FILE}
. if defined(PKG_PRESERVE)
${_PKG_SILENT}${_PKG_DEBUG}${DATE} > ${PRESERVE_FILE}
. endif
${_PKG_SILENT}${_PKG_DEBUG} \
files=""; \
for f in ${.CURDIR}/Makefile ${FILESDIR}/* ${PKGDIR}/*; do \
if [ -f "$$f" ]; then \
files="$$files \"$$f\""; \
fi; \
done; \
if [ -f ${DISTINFO_FILE} ]; then \
for f in `${AWK} 'NF == 4 && $$3 == "=" { gsub("[()]", "", $$2); print $$2 }' < ${DISTINFO_FILE}`; do \
if [ -f ${PATCHDIR}/$$f ]; then \
files="$$files \"${PATCHDIR}/$$f\""; \
fi; \
done; \
fi; \
if [ -d ${PATCHDIR} ]; then \
for f in ${PATCHDIR}/patch-*; do \
case $$f in \
*.orig|*.rej|*~) ;; \
${PATCHDIR}/patch-local-*) \
files="$$files \"$$f\"" ;; \
esac; \
done; \
fi; \
eval ${GREP} '\$$NetBSD' $$files | ${SED} -e 's|^${_PKGSRCDIR}/||' > ${BUILD_VERSION_FILE}
. for def in ${BUILD_DEFS}
@${ECHO} ${def}=${${def}:Q} | ${SED} -e 's|^PATH=[^ ]*|PATH=...|' >> ${BUILD_INFO_FILE}
. endfor
. if !empty(USE_LANGUAGES)
@${ECHO} "CC_VERSION=${CC_VERSION}" >> ${BUILD_INFO_FILE}
. endif
. if defined(USE_PERL5) && (${USE_PERL5} == "run")
@${ECHO} "PERL=`${PERL5} --version 2>/dev/null | ${GREP} 'This is perl'`" >> ${BUILD_INFO_FILE}
. endif
. ifdef _USE_GMAKE
@${ECHO} "GMAKE=`${GMAKE} --version | ${GREP} Make`" >> ${BUILD_INFO_FILE}
. endif
. if ${CHECK_SHLIBS} == "YES"
${_PKG_SILENT}${_PKG_DEBUG} \
case "${LDD}" in \
"") ldd=`${TYPE} ldd 2>/dev/null | ${AWK} '{ print $$NF }'`;; \
*) ldd="${LDD}"; \
esac; \
case "${OBJECT_FMT}" in \
ELF) bins=`${SETENV} PREFIX=${PREFIX} ${AWK} '/^(bin|sbin|libexec)\// { print ENVIRON["PREFIX"] "/" $$0 }' ${PLIST} || ${TRUE}`; \
libs=`${SETENV} PREFIX=${PREFIX} ${AWK} '/^lib\/lib.*\.so\.[0-9]+$$/ { print ENVIRON["PREFIX"] "/" $$0 }' ${PLIST} || ${TRUE}`; \
if ${TEST} "$$bins" != "" -o "$$libs" != ""; then \
requires=`($$ldd $$bins $$libs 2>/dev/null || ${TRUE}) | ${AWK} 'NF == 3 { print $$3 }' | ${SORT} -u`; \
fi; \
;; \
Mach-O) bins=`${SETENV} PREFIX=${PREFIX} ${AWK} '/^(bin|sbin|libexec)\// { print ENVIRON["PREFIX"] "/" $$0 }' ${PLIST} || ${TRUE}`; \
libs=`${SETENV} PREFIX=${PREFIX} ${AWK} '/^lib\/lib.*\.dylib/ { print ENVIRON["PREFIX"] "/" $$0 }' ${PLIST} || ${TRUE}`; \
if ${TEST} "$$bins" != "" -o "$$libs" != ""; then \
requires=`($$ldd $$bins $$libs 2>/dev/null || ${TRUE}) | ${AWK} '/compatibility version/ { print $$1 }' | ${SORT} -u`; \
fi; \
;; \
esac; \
for i in "" $$libs; do \
${TEST} "$$i" = "" && continue; \
${ECHO} "PROVIDES=$$i" >> ${BUILD_INFO_FILE}; \
done; \
for req in "" $$requires; do \
${TEST} "$$req" = "" && continue; \
${ECHO} "REQUIRES=$$req" >> ${BUILD_INFO_FILE}; \
done
. endif
${_PKG_SILENT}${_PKG_DEBUG} \
${ECHO} "_PKGTOOLS_VER=${PKGTOOLS_VERSION}" >> ${BUILD_INFO_FILE}
${_PKG_SILENT}${_PKG_DEBUG} \
size_this=`${MAKE} ${MAKEFLAGS} print-pkg-size-this`; \
size_depends=`${MAKE} ${MAKEFLAGS} print-pkg-size-depends`; \
${ECHO} $$size_this >${SIZE_PKG_FILE}; \
${ECHO} $$size_this $$size_depends + p | ${DC} >${SIZE_ALL_FILE}
${_PKG_SILENT}${_PKG_DEBUG} \
doit=yes; \
case ${PKG_INSTALLATION_TYPE} in \
overwrite) if [ -d ${_PKG_DBDIR}/${PKGNAME} ]; then \
doit=no; \
fi ;; \
esac; \
case $$doit in \
yes) \
${ECHO_MSG} "${_PKGSRC_IN}> Registering installation for ${PKGNAME}"; \
${MKDIR} ${_PKG_DBDIR}/${PKGNAME}; \
${PKG_CREATE} ${PKG_ARGS_INSTALL} -O ${PKGFILE} > ${_PKG_DBDIR}/${PKGNAME}/+CONTENTS; \
${CP} ${DESCR} ${_PKG_DBDIR}/${PKGNAME}/+DESC; \
${ECHO} ${COMMENT:Q} > ${_PKG_DBDIR}/${PKGNAME}/+COMMENT; \
${CP} ${BUILD_VERSION_FILE} ${_PKG_DBDIR}/${PKGNAME}/+BUILD_VERSION; \
${CP} ${BUILD_INFO_FILE} ${_PKG_DBDIR}/${PKGNAME}/+BUILD_INFO; \
if ${TEST} -e ${SIZE_PKG_FILE}; then \
${CP} ${SIZE_PKG_FILE} ${_PKG_DBDIR}/${PKGNAME}/+SIZE_PKG; \
fi ; \
if ${TEST} -e ${SIZE_ALL_FILE}; then \
${CP} ${SIZE_ALL_FILE} ${_PKG_DBDIR}/${PKGNAME}/+SIZE_ALL; \
fi ; \
if ${TEST} -e ${PRESERVE_FILE}; then \
${CP} ${PRESERVE_FILE} ${_PKG_DBDIR}/${PKGNAME}/+PRESERVE; \
fi ; \
if [ "${PKG_INSTALLATION_TYPE}" = "pkgviews" ]; then \
${TOUCH} ${_PKG_DBDIR}/${PKGNAME}/+VIEWS; \
fi ; \
if [ -n "${INSTALL_FILE}" ]; then \
if ${TEST} -e ${INSTALL_FILE}; then \
${CP} ${INSTALL_FILE} ${_PKG_DBDIR}/${PKGNAME}/+INSTALL; \
fi; \
fi; \
if [ -n "${DEINSTALL_FILE}" ]; then \
if ${TEST} -e ${DEINSTALL_FILE}; then \
${CP} ${DEINSTALL_FILE} ${_PKG_DBDIR}/${PKGNAME}/+DEINSTALL; \
fi; \
fi; \
if [ -n "${MESSAGE}" ]; then \
if ${TEST} -e ${MESSAGE}; then \
${CP} ${MESSAGE} ${_PKG_DBDIR}/${PKGNAME}/+DISPLAY; \
fi; \
fi; \
list="`${MAKE} ${MAKEFLAGS} run-depends-list PACKAGE_DEPENDS_QUICK=true ECHO_MSG=${TRUE} | ${SORT} -u`" ; \
for realdep in `${ECHO} $$list | ${XARGS} -n 1 ${SETENV} ${PKG_BEST_EXISTS} | ${SORT} -u`; do \
if ${TEST} -z "$$realdep"; then \
${ECHO} "$$dep not installed - dependency NOT registered" ; \
elif [ -d ${_PKG_DBDIR}/$$realdep ]; then \
if ${TEST} ! -e ${_PKG_DBDIR}/$$realdep/+REQUIRED_BY; then \
${TOUCH} ${_PKG_DBDIR}/$$realdep/+REQUIRED_BY; \
fi; \
${AWK} 'BEGIN { found = 0; } \
$$0 == "${PKGNAME}" { found = 1; } \
{ print $$0; } \
END { if (!found) { printf("%s\n", "${PKGNAME}"); }}' \
< ${_PKG_DBDIR}/$$realdep/+REQUIRED_BY > ${_PKG_DBDIR}/$$realdep/reqby.$$$$; \
${MV} ${_PKG_DBDIR}/$$realdep/reqby.$$$$ ${_PKG_DBDIR}/$$realdep/+REQUIRED_BY; \
${ECHO} "${PKGNAME} requires installed package $$realdep"; \
fi; \
done ;; \
esac
. if (${PKG_INSTALLATION_TYPE} == "pkgviews") && \
!empty(BUILD_VIEWS:M[yY][eE][sS])
${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} build-views
. endif # pkgviews
.endif # !fake-pkg
.PHONY: build-views
build-views: do-su-build-views
.PHONY: do-su-build-views
do-su-build-views:
@${ECHO_MSG} "${_PKGSRC_IN}> Building views for ${PKGNAME}"
${_PKG_SILENT}${_PKG_DEBUG} \
realtarget="real-su-build-views"; \
action="build-views"; \
${_SU_TARGET}
.PHONY: real-su-build-views
.if !target(real-su-build-views)
real-su-build-views:
. if (${PKG_INSTALLATION_TYPE} == "pkgviews") && defined(PKGVIEWS)
${_PKG_SILENT}${_PKG_DEBUG} \
${MKDIR} ${LOCALBASE}; \
for v in ${PKGVIEWS}; do \
case "$$v" in \
"") dbdir=${PKG_DBDIR}; viewname=standard ;; \
*) dbdir=${LOCALBASE}/$$v/.dbdir; viewname=$$v ;; \
esac; \
${ECHO} "=> Performing package view clash check for ${PKGNAME} in $$viewname view"; \
pkg=`${PKG_INFO_CMD} -K $$dbdir -e ${PKGBASE} || ${TRUE}`; \
case "$$pkg" in \
"") ;; \
*) ${ECHO} "*** ${PKGBASE} exists in $$viewname view - package $$pkg ***"; \
${ECHO} "*** Not hoisting ${PKGNAME} into $$viewname view"; \
continue ;; \
esac; \
${ECHO} "=> Performing package view overwrite check for ${PKGNAME} in $$viewname view"; \
dups=`${SETENV} PLIST_IGNORE_FILES="${_PLIST_IGNORE_FILES}" ${PKG_VIEW} --view=$$v check ${PKGNAME} || ${TRUE}`; \
case "$$dups" in \
"") ;; \
*) ${ECHO} "***********************************************************"; \
${ECHO} "**** The following symbolic links will be overwritten *****"; \
for f in $$dups; do \
${LS} -l ${LOCALBASE}/$$v/$$f; \
done; \
${ECHO} "***********************************************************"; \
;; \
esac; \
${ECHO} "=> Linking package into $$viewname view"; \
${SETENV} PLIST_IGNORE_FILES="${_PLIST_IGNORE_FILES}" ${PKG_VIEW} --view=$$v add ${PKGNAME}; \
done
. else
${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA}
. endif
.endif
.PHONY: remove-views
remove-views: do-su-remove-views
.PHONY: do-su-remove-views
do-su-remove-views:
@${ECHO_MSG} "${_PKGSRC_IN}> Removing ${PKGNAME} from views"
${_PKG_SILENT}${_PKG_DEBUG} \
realtarget="real-su-remove-views"; \
action="remove-views"; \
${_SU_TARGET}
.PHONY: real-su-remove-views
.if !target(real-su-remove-views)
real-su-remove-views:
. if (${PKG_INSTALLATION_TYPE} == "pkgviews") && defined(PKGVIEWS)
${_PKG_SILENT}${_PKG_DEBUG} \
for v in ${PKGVIEWS}; do \
case "$$v" in \
"") dbdir=${PKG_DBDIR}; viewname=standard ;; \
*) dbdir=${LOCALBASE}/$$v/.dbdir; viewname=$$v ;; \
esac; \
${ECHO} "=> Removing package from $$viewname view"; \
${SETENV} PLIST_IGNORE_FILES="${_PLIST_IGNORE_FILES}" ${PKG_VIEW} --view=$$v delete ${PKGNAME}; \
done
.else
${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA}
. endif
.endif
# Depend is generally meaningless for arbitrary packages, but if someone wants
# one they can override this. This is just to catch people who've gotten into
# the habit of typing `${MAKE} depend all install' as a matter of course.
#
.PHONY: depend
.if !target(depend)
depend:
.endif
# Same goes for tags
.PHONY: tags
.if !target(tags)
tags:
.endif
# if automatic manual page compression is done by the package according
# to MANZ's value, set MANCOMPRESSED if MANZ is set
.if defined(MANCOMPRESSED_IF_MANZ) && defined(MANZ)
MANCOMPRESSED= yes
MAKE_ENV+= MANZ="${MANZ}"
.endif
# generate ${PLIST} from ${_PLIST_SRC} by:
# - substituting for PLIST_SUBST entries
# - fixing list of man-pages according to MANZ, MANINSTALL.
# - adding symlinks for shared libs (ELF) or ldconfig calls (a.out).
# plist awk pattern-action statement to handle MANINSTALL
_PLIST_AWK_MANINSTALL= \
{ \
if (!"${MANINSTALL:Mmaninstall}" && \
match($$0, "^([^/]*/)*man/([^/]*/)?man[1-9ln]") ) { \
next; \
} \
if (!"${MANINSTALL:Mcatinstall}" && \
match($$0, "^([^/]*/)*man/([^/]*/)?cat[1-9ln]") ) { \
next; \
} \
}
# plist awk pattern-action statement to strip '.gz' from man
# entries
_PLIST_AWK_STRIP_MANZ= \
/^([^\/]*\/)*man\/([^\/]*\/)?(man[1-9ln]\/.*[1-9ln]|cat[1-9ln]\/.*0)\.gz$$/ { \
$$0 = substr($$0, 1, length($$0) - 3); \
}
# plist awk pattern-action statement to add '.gz' to man entries
_PLIST_AWK_ADD_MANZ= \
/^([^\/]*\/)*man\/([^\/]*\/)?(man[1-9ln]\/.*[1-9ln]|cat[1-9ln]\/.*0)$$/ { \
$$0 = $$0 ".gz"; \
}
# plist awk pattern-action statement to handle PLIST_SUBST substitutions
# BEWARE: the awk script quote is closed and reopened around the
# string argument of gsub() calls so historic quoting semantic of
# PLIST_SUBST is preserved.
# XXX `_str_quote_{start,end}_' is a gross hack to work around weird word
# splitting.
_PLIST_AWK_SUBST= { ${PLIST_SUBST:S|=|\\}/,_str_quote_start_|:S|$|_str_quote_end_);|:S|^|gsub(/\\\$\\{|:S|_str_quote_start_|"'|g:S|_str_quote_end_|'"|g} }
# plist awk pattern-action statement to rewrite "imake installed" catman pages
# as plain manpages.
_PLIST_AWK_IMAKE_MAN= \
/^([^\/]*\/)*man\/([^\/]*\/)?cat[1-9ln]\/.*0$$/ { \
n = match($$0, "/cat[1-9ln]"); \
sect = sprintf(".%s", substr($$0, n + 4, 1)); \
sub("/cat", "/man"); \
sub("\\.0$$", sect); \
}
# plist awk pattern-action statement to handle info files:
# generate list of files matching
# ${PREFIX}/${INFO_DIR}/filename(-[0-9]+)?(.gz)?
# for `filename' being each word of INFO_FILES in turn.
# Notes:
# - first the filenames matching ${PREFIX}/${INFO_DIR}/filename*
# are generated with ls then they are filtered by the exact pattern.
# - ${PREFIX}/${INFO_DIR}/filename is single quoted and single quote
# escaped
# XXX When all info file entries will be removed from PLIST files
# the non-BEGIN pattern-action statements generated below will be retired.
_PLIST_AWK_INFO=
.if ${PLIST_TYPE} == "static"
. if !empty(INFO_FILES)
. for _f_ in ${INFO_FILES}
_PLIST_AWK_INFO+= \
BEGIN { \
cmd="${_f_}"; gsub("'\''", "\\'\''", cmd); \
sub("^", "${LS} '\''${PREFIX}/${INFO_DIR}/", cmd); \
sub("$$", "'\''*", cmd); \
while ((cmd | getline l) > 0) { \
if (match(l, ".*/${_f_:S|+|\\\+|g}(-[0-9]+)?(\\.gz)?$$")) { \
sub("^${PREFIX}/", "", l); \
print l; \
} \
} \
close(cmd); \
} \
/^${INFO_DIR:S|/|\\/|g}\/${_f_}(-[0-9]+)?$$/ { next; }
. endfor
. endif
.endif
# _PLIST_AWK_SCRIPT hold the complete awk script for plist target.
#
_PLIST_AWK_SCRIPT= '
# Do the substitutions
# See comments above about _PLIST_AWK_SUBST: it contains single quotes!
# So _PLIST_AWK_SCRIPT is intended to be single quoted.
_PLIST_AWK_SCRIPT+= ${_PLIST_AWK_SUBST}
# Generated entries for info files
.if !empty(INFO_FILES)
_PLIST_AWK_SCRIPT+= ${_PLIST_AWK_INFO}
.endif
# Strip the '.gz' suffixes on man entries
_PLIST_AWK_SCRIPT+= ${_PLIST_AWK_STRIP_MANZ}
# Deal with MANINSTALL and man entries
_PLIST_AWK_SCRIPT+= ${_PLIST_AWK_MANINSTALL}
# Deal with "imake installed" catman pages
.if defined(USE_IMAKE) && ${_PREFORMATTED_MAN_DIR} == "man"
_PLIST_AWK_SCRIPT+= ${_PLIST_AWK_IMAKE_MAN}
.endif
# Add '.gz' suffixes on man entries if needed
.if defined(MANZ)
_PLIST_AWK_SCRIPT+= ${_PLIST_AWK_ADD_MANZ}
.endif
# Print the entry
_PLIST_AWK_SCRIPT+= { print $$0; }
#
_PLIST_AWK_SCRIPT+= '
# GENERATE_PLIST is a sequence of commands, terminating in a semicolon,
# that outputs contents for a PLIST to stdout and is appended to
# the contents of ${_PLIST_SRC}.
#
GENERATE_PLIST?= ${TRUE};
.if ${PLIST_TYPE} == "dynamic"
_PLIST_IGNORE_CMD= \
( while read i; do \
ignore=no; \
for p in ${_PLIST_IGNORE_FILES}; do \
case "$$i" in \
$$p) ignore=yes; break ;; \
esac; \
done; \
[ "$$ignore" = "yes" ] || ${ECHO} "$$i"; \
done )
_GENERATE_PLIST= \
${FIND} ${PREFIX} \! -type d -print | ${SORT} | \
${SED} -e "s|^${PREFIX}/||" | \
${_PLIST_IGNORE_CMD}; \
${FIND} ${PREFIX} -type d -print | ${SORT} -r | \
${GREP} -v "^${PREFIX}$$" | \
${_PLIST_IGNORE_CMD} | \
${SED} -e "s|^${PREFIX}/|@unexec ${RMDIR} -p %D/|" \
-e "s,$$, 2>/dev/null || ${TRUE},";
.else
_GENERATE_PLIST= ${CAT} ${_PLIST_SRC}; ${GENERATE_PLIST}
.endif
.PHONY: plist
plist: ${PLIST}
${PLIST}: ${_PLIST_SRC}
${_PKG_SILENT}${_PKG_DEBUG} \
{ ${_GENERATE_PLIST} } | ${AWK} ${_PLIST_AWK_SCRIPT} \
> ${PLIST}; \
${MAKE} ${MAKEFLAGS} do-shlib-handling \
SHLIB_PLIST_MODE=1
# generate ${MESSAGE} from ${MESSAGE_SRC} by substituting
# for MESSAGE_SUBST entries
.PHONY: message
message: ${MESSAGE}
.ifdef MESSAGE
${MESSAGE}: ${MESSAGE_SRC}
${_PKG_SILENT}${_PKG_DEBUG} \
if [ -z "${MESSAGE_SRC}" ]; then \
${ECHO} "${MESSAGE_SRC} not found."; \
${ECHO} "Please set MESSAGE_SRC correctly."; \
else \
${CAT} ${MESSAGE_SRC} | \
${SED} ${MESSAGE_SUBST_SED} \
> ${MESSAGE}; \
fi
.endif
# generate ${DESCR} from ${DESCR_SRC} by:
# - Appending the homepage URL, if any
.PHONY: descr
descr: ${DESCR}
${DESCR}: ${DESCR_SRC}
@${CAT} ${DESCR_SRC} >${DESCR}
.if defined(HOMEPAGE)
@\
${ECHO} >>${DESCR} ; \
${ECHO} "Homepage:" >>${DESCR} ; \
${ECHO} '${HOMEPAGE}' >>${DESCR}
.endif
.include "../../mk/subst.mk"
#
# For bulk build targets (bulk-install, bulk-package), the
# BATCH variable must be set in /etc/mk.conf:
#
.if defined(BATCH)
. include "../../mk/bulk/bsd.bulk-pkg.mk"
.endif