# $NetBSD: bsd.pkg.mk,v 1.1747 2005/11/09 18:42:32 tv Exp $ # # This file is in the public domain. # # This file is derived from bsd.port.mk - 940820 Jordan K. Hubbard. # # Please see the pkgsrc/doc/guide manual for details on the # variables used in this make file template. # # Default sequence for "all" is: fetch checksum extract patch configure build # # Please read the comments in the targets section below, you # should be able to use the pre-* or post-* targets/scripts # (which are available for every stage except checksum) or # override the do-* targets to do pretty much anything you want. ############################################################################ # Include any preferences, if not already included, and common definitions ############################################################################ .include "../../mk/bsd.prefs.mk" .include "../../mk/bsd.hacks.mk" # This has to come first to avoid showing all BUILD_DEFS added by this # Makefile, which are usually not customizable. .PHONY: pre-install-depends build-defs-message pre-install-depends: build-defs-message .if empty(PKGSRC_SHOW_BUILD_DEFS:M[yY][eE][sS]) build-defs-message: .elif !target(build-defs-message) build-defs-message: ${WRKDIR} . if defined(BUILD_DEFS) && !empty(BUILD_DEFS) . if !exists(${WRKDIR}/.bdm_done) @${ECHO} "==========================================================================" @${ECHO} "The following variables will affect the build process of this package," @${ECHO} "${PKGNAME}. Their current value is shown below:" @${ECHO} "" . for var in ${BUILD_DEFS:O} . if !defined(${var}) @${ECHO} " * ${var} (not defined)" . elif defined(${var}) && empty(${var}) @${ECHO} " * ${var} (defined)" . else @${ECHO} " * ${var} = ${${var}}" . endif . endfor @${ECHO} "" @${ECHO} "You may want to abort the process now with CTRL-C and change their value" @${ECHO} "before continuing. Be sure to run \`${MAKE} clean' after" @${ECHO} "the changes." @${ECHO} "==========================================================================" @${TOUCH} ${WRKDIR}/.bdm_done . endif . endif .endif ############################################################################ # Transform package Makefile variables and set defaults ############################################################################ CHECK_SHLIBS?= YES # run check-shlibs after install CLEANDEPENDS?= NO DEINSTALLDEPENDS?= NO # add -R to pkg_delete MKCRYPTO?= YES # build crypto packages by default NOCLEAN?= NO # don't clean up after update REINSTALL?= NO # reinstall upon update SHLIB_HANDLING?= YES # do automatic shared lib handling CREATE_WRKDIR_SYMLINK?= yes # create a symlink to WRKOBJDIR ##### Variant spellings .if defined(LICENCE) && !defined(LICENSE) LICENSE= ${LICENCE} .endif .if defined(ACCEPTABLE_LICENCES) && !defined(ACCEPTABLE_LICENSES) ACCEPTABLE_LICENSES= ${ACCEPTABLE_LICENCES} .endif ##### PKGBASE, PKGNAME[_NOREV], PKGVERSION PKGBASE?= ${PKGNAME:C/-[^-]*$//} PKGVERSION?= ${PKGNAME:C/^.*-//} .if defined(PKGREVISION) && !empty(PKGREVISION) && (${PKGREVISION} != "0") . if defined(PKGNAME) PKGNAME_NOREV:= ${PKGNAME} PKGNAME:= ${PKGNAME}nb${PKGREVISION} . else PKGNAME?= ${DISTNAME}nb${PKGREVISION} PKGNAME_NOREV= ${DISTNAME} . endif .else PKGNAME?= ${DISTNAME} PKGNAME_NOREV= ${PKGNAME} .endif ##### PLIST .if ${PKG_INSTALLATION_TYPE} == "pkgviews" PLIST_TYPE?= dynamic .endif PLIST_TYPE?= static .if !defined(PLIST_SRC) . if exists(${PKGDIR}/PLIST.common) PLIST_SRC+= ${PKGDIR}/PLIST.common . endif . if exists(${PKGDIR}/PLIST.${OPSYS}) PLIST_SRC+= ${PKGDIR}/PLIST.${OPSYS} . endif . if exists(${PKGDIR}/PLIST.${MACHINE_ARCH:C/i[3-6]86/i386/g}) PLIST_SRC+= ${PKGDIR}/PLIST.${MACHINE_ARCH:C/i[3-6]86/i386/g} . endif . if exists(${PKGDIR}/PLIST.${OPSYS}-${MACHINE_ARCH:C/i[3-6]86/i386/g}) PLIST_SRC+= ${PKGDIR}/PLIST.${OPSYS}-${MACHINE_ARCH:C/i[3-6]86/i386/g} . endif . if exists(${PKGDIR}/PLIST) PLIST_SRC+= ${PKGDIR}/PLIST . endif . if exists(${PKGDIR}/PLIST.common_end) PLIST_SRC+= ${PKGDIR}/PLIST.common_end . endif .endif # !PLIST_SRC ##### Others _DISTDIR?= ${DISTDIR}/${DIST_SUBDIR} BUILD_DEPENDS?= # empty BUILD_TARGET?= all COMMENT?= (no description) CONFIGURE_DIRS?= ${WRKSRC} CONFIGURE_SCRIPT?= ./configure DEPENDS?= # empty DESCR_SRC?= ${PKGDIR}/DESCR DIGEST_ALGORITHMS?= SHA1 RMD160 DISTFILES?= ${DISTNAME}${EXTRACT_SUFX} DISTINFO_FILE?= ${PKGDIR}/distinfo INSTALL_DIRS?= ${BUILD_DIRS} INSTALL_MAKE_FLAGS?= ${MAKE_FLAGS} INSTALL_TARGET?= install INTERACTIVE_STAGE?= none MAINTAINER?= tech-pkg@NetBSD.org MAKE_FLAGS?= # empty MAKEFILE?= Makefile PATCH_DIGEST_ALGORITHM?=SHA1 PKG_SUFX?= .tgz PKGFILE?= ${PKGREPOSITORY}/${PKGNAME}${PKG_SUFX} PKGREPOSITORY?= ${PACKAGES}/${PKGREPOSITORYSUBDIR} PKGREPOSITORYSUBDIR?= All PKGWILDCARD?= ${PKGBASE}-[0-9]* SVR4_PKGNAME?= ${PKGNAME} USE_DIGEST?= YES WRKSRC?= ${WRKDIR}/${DISTNAME} # If a package sets INSTALLATION_DIRS, then it's known to pre-create all # of the directories that it needs at install-time, so we don't need # mtree to do it for us. # .if defined(INSTALLATION_DIRS) && !empty(INSTALLATION_DIRS) NO_MTREE= yes .endif .if (defined(INSTALL_UNSTRIPPED) && !empty(INSTALL_UNSTRIPPED:M[yY][eE][sS])) || defined(DEBUG_FLAGS) _INSTALL_UNSTRIPPED= # set (flag used by platform/*.mk) .endif ##### Non-overridable constants # Latest versions of tools required for correct pkgsrc operation. DIGEST_REQD= 20010302 PKGTOOLS_REQD= ${_OPSYS_PKGTOOLS_REQD:U20051103} PKG_DB_TMPDIR= ${WRKDIR}/.pkgdb DDIR= ${WRKDIR}/.DDIR DESCR= ${PKG_DB_TMPDIR}/+DESC DLIST= ${WRKDIR}/.DLIST PLIST= ${WRKDIR}/.PLIST # Files to create for versioning and build information BUILD_VERSION_FILE= ${PKG_DB_TMPDIR}/+BUILD_VERSION BUILD_INFO_FILE= ${PKG_DB_TMPDIR}/+BUILD_INFO # Files containing size of pkg w/o and w/ all required pkgs SIZE_PKG_FILE= ${PKG_DB_TMPDIR}/+SIZE_PKG SIZE_ALL_FILE= ${PKG_DB_TMPDIR}/+SIZE_ALL # File to denote "no deletion of a package" PRESERVE_FILE= ${PKG_DB_TMPDIR}/+PRESERVE ##### Transform USE_* into dependencies .include "../../mk/bsd.pkg.use.mk" ############################################################################ # Sanity checks ############################################################################ # Fail-safe in the case of circular dependencies .if defined(_PKGSRC_DEPS) && defined(PKGNAME) && !empty(_PKGSRC_DEPS:M${PKGNAME}) PKG_FAIL_REASON+= "Circular dependency detected" .endif # PKG_INSTALLATION_TYPE can only be one of two values: "pkgviews" or # "overwrite". .if (${PKG_INSTALLATION_TYPE} != "pkgviews") && \ (${PKG_INSTALLATION_TYPE} != "overwrite") PKG_FAIL_REASON+= "PKG_INSTALLATION_TYPE must be \`\`pkgviews'' or \`\`overwrite''." .endif .if empty(PKG_INSTALLATION_TYPES:M${PKG_INSTALLATION_TYPE}) PKG_FAIL_REASON+= "This package doesn't support PKG_INSTALLATION_TYPE=${PKG_INSTALLATION_TYPE}." .endif .if (${PLIST_TYPE} != "dynamic") && (${PLIST_TYPE} != "static") PKG_FAIL_REASON+= "PLIST_TYPE must be \`\`dynamic'' or \`\`static''." .endif .if (${PKG_INSTALLATION_TYPE} == "overwrite") && (${PLIST_TYPE} != "static") PKG_FAIL_REASON+= "PLIST_TYPE must be \`\`static'' for \`\`overwrite'' packages." .endif # Check that we are using up-to-date pkg_* tools with this file. .if !defined(NO_PKGTOOLS_REQD_CHECK) . if ${PKGTOOLS_VERSION} < ${PKGTOOLS_REQD} PKG_FAIL_REASON+='Error: The package tools installed on this system are out of date.' PKG_FAIL_REASON+='The installed package tools are dated ${PKGTOOLS_VERSION:C|(....)(..)(..)|\1/\2/\3|} and you must update' PKG_FAIL_REASON+='them to at least ${PKGTOOLS_REQD:C|(....)(..)(..)|\1/\2/\3|} using the following command:' PKG_FAIL_REASON+='' PKG_FAIL_REASON+=' cd ${PKGSRCDIR}/pkgtools/pkg_install && ${MAKE} clean && ${MAKE} install' . endif .endif # !NO_PKGTOOLS_REQD_CHECK .if defined(ALL_TARGET) PKG_FAIL_REASON+='ALL_TARGET is deprecated and must be replaced with BUILD_TARGET.' .endif .if defined(NO_WRKSUBDIR) PKG_FAIL_REASON+='NO_WRKSUBDIR has been deprecated - please replace it with an explicit' PKG_FAIL_REASON+='assignment of WRKSRC= $${WRKDIR}' .endif # NO_WRKSUBDIR # We need to make sure the buildlink-x11 package is not installed since it # breaks builds that use imake. .if defined(USE_IMAKE) . if exists(${LOCALBASE}/lib/X11/config/buildlinkX11.def) || \ exists(${X11BASE}/lib/X11/config/buildlinkX11.def) PKG_FAIL_REASON+= "${PKGNAME} uses imake, but the buildlink-x11 package was found." \ " Please deinstall it (pkg_delete buildlink-x11)." . endif .endif # USE_IMAKE .if !defined(CATEGORIES) || !defined(DISTNAME) PKG_FAIL_REASON+='CATEGORIES and DISTNAME are mandatory.' .endif .if defined(LIB_DEPENDS) PKG_FAIL_REASON+='LIB_DEPENDS is deprecated and must be replaced with DEPENDS.' .endif .if defined(PKG_PATH) PKG_FAIL_REASON+='Please unset PKG_PATH before doing pkgsrc work!' .endif .if defined(MASTER_SITE_SUBDIR) PKG_FAIL_REASON+='MASTER_SITE_SUBDIR is deprecated and must be replaced with MASTER_SITES.' .endif .if defined(PATCH_SITE_SUBDIR) PKG_FAIL_REASON+='PATCH_SITE_SUBDIR is deprecated and must be replaced with PATCH_SITES.' .endif .if defined(ONLY_FOR_ARCHS) || defined(NOT_FOR_ARCHS) \ || defined(ONLY_FOR_OPSYS) || defined(NOT_FOR_OPSYS) PKG_FAIL_REASON+='ONLY/NOT_FOR_ARCHS/OPSYS are deprecated and must be replaced with ONLY/NOT_FOR_PLATFORM.' .endif # Allow variables to be set on a per-OS basis OPSYSVARS+= CFLAGS CXXFLAGS CPPFLAGS LDFLAGS LIBS .for _var_ in ${OPSYSVARS:O} . if defined(${_var_}.${OPSYS}) ${_var_}+= ${${_var_}.${OPSYS}} . elif defined(${_var_}.*) ${_var_}+= ${${_var_}.*} . endif .endfor CPPFLAGS+= ${CPP_PRECOMP_FLAGS} ALL_ENV+= CC=${CC:Q} ALL_ENV+= CFLAGS=${CFLAGS:M*:Q} ALL_ENV+= CPPFLAGS=${CPPFLAGS:M*:Q} ALL_ENV+= CXX=${CXX:M*:Q} ALL_ENV+= CXXFLAGS=${CXXFLAGS:M*:Q} ALL_ENV+= COMPILER_RPATH_FLAG=${COMPILER_RPATH_FLAG:Q} ALL_ENV+= F77=${FC:Q} ALL_ENV+= FC=${FC:Q} ALL_ENV+= FFLAGS=${FFLAGS:M*:Q} ALL_ENV+= LANG=C ALL_ENV+= LC_COLLATE=C ALL_ENV+= LC_CTYPE=C ALL_ENV+= LC_MESSAGES=C ALL_ENV+= LC_MONETARY=C ALL_ENV+= LC_NUMERIC=C ALL_ENV+= LC_TIME=C ALL_ENV+= LDFLAGS=${LDFLAGS:M*:Q} ALL_ENV+= LINKER_RPATH_FLAG=${LINKER_RPATH_FLAG:Q} ALL_ENV+= PATH=${PATH:Q}:${LOCALBASE}/bin:${X11BASE}/bin ALL_ENV+= PREFIX=${PREFIX} MAKE_ENV+= ${ALL_ENV} MAKE_ENV+= ${NO_EXPORT_CPP:D:UCPP=${CPP:Q}} MAKE_ENV+= LINK_ALL_LIBGCC_HACK=${LINK_ALL_LIBGCC_HACK:Q} MAKE_ENV+= LOCALBASE=${LOCALBASE} MAKE_ENV+= NO_WHOLE_ARCHIVE_FLAG=${NO_WHOLE_ARCHIVE_FLAG:Q} MAKE_ENV+= WHOLE_ARCHIVE_FLAG=${WHOLE_ARCHIVE_FLAG:Q} MAKE_ENV+= X11BASE=${X11BASE} MAKE_ENV+= X11PREFIX=${X11PREFIX} MAKE_ENV+= PKGMANDIR=${PKGMANDIR} # Constants to provide a consistent environment for packages using # BSD-style Makefiles. MAKE_ENV+= MAKECONF=${PKGMAKECONF:U/dev/null} MAKE_ENV+= OBJECT_FMT=${OBJECT_FMT:Q} MAKE_ENV+= ${USETOOLS:DUSETOOLS=${USETOOLS:Q}} SCRIPTS_ENV+= ${ALL_ENV} SCRIPTS_ENV+= _PKGSRCDIR=${_PKGSRCDIR} SCRIPTS_ENV+= ${BATCH:DBATCH=yes} SCRIPTS_ENV+= CURDIR=${.CURDIR} SCRIPTS_ENV+= DEPENDS=${DEPENDS:Q} SCRIPTS_ENV+= DISTDIR=${DISTDIR} SCRIPTS_ENV+= FILESDIR=${FILESDIR} SCRIPTS_ENV+= LOCALBASE=${LOCALBASE} SCRIPTS_ENV+= PATCHDIR=${PATCHDIR} SCRIPTS_ENV+= PKGSRCDIR=${PKGSRCDIR} SCRIPTS_ENV+= SCRIPTDIR=${SCRIPTDIR} SCRIPTS_ENV+= VIEWBASE=${VIEWBASE} SCRIPTS_ENV+= WRKDIR=${WRKDIR} SCRIPTS_ENV+= WRKSRC=${WRKSRC} SCRIPTS_ENV+= X11BASE=${X11BASE} CONFIGURE_ENV+= ${ALL_ENV} # Store the result in the +BUILD_INFO file so we can query for the build # options using "pkg_info -Q PKG_OPTIONS ". # .if defined(PKG_SUPPORTED_OPTIONS) && defined(PKG_OPTIONS) BUILD_DEFS+= PKG_OPTIONS .endif .if empty(DEPOT_SUBDIR) PKG_FAIL_REASON+= "DEPOT_SUBDIR may not be empty." .endif .if ${PKG_INSTALLATION_TYPE} == "pkgviews" # # _PLIST_IGNORE_FILES basically mirrors the list of ignored files found # in pkg_views(1). It's used by the dynamic PLIST generator to skip # adding the named files to the PLIST. # _PLIST_IGNORE_FILES= +* # package metadata files _PLIST_IGNORE_FILES+= info/dir .if defined(INFO_DIR) && empty(INFO_DIR:Minfo) _PLIST_IGNORE_FILES+= ${INFO_DIR}/dir .endif _PLIST_IGNORE_FILES+= *[~\#] *.OLD *.orig *,v # scratch config files _PLIST_IGNORE_FILES+= ${PLIST_IGNORE_FILES} .endif BUILD_DEFS+= _PLIST_IGNORE_FILES # Automatically increase process limit where necessary for building. _ULIMIT_CMD= .if defined(UNLIMIT_RESOURCES) . for __tmp__ in ${UNLIMIT_RESOURCES} . if defined(ULIMIT_CMD_${__tmp__}) _ULIMIT_CMD+= ${ULIMIT_CMD_${__tmp__}} ; . endif . endfor .endif # If GNU_CONFIGURE is defined, then pass LIBS to the GNU configure script. # also pass in a CONFIG_SHELL to avoid picking up bash .if defined(GNU_CONFIGURE) CONFIG_SHELL?= ${SH} CONFIGURE_ENV+= CONFIG_SHELL=${CONFIG_SHELL} CONFIGURE_ENV+= LIBS=${LIBS:M*:Q} CONFIGURE_ENV+= install_sh=${INSTALL:Q} . if (defined(USE_LIBTOOL) || !empty(PKGDIR:M*/libtool-base)) && defined(_OPSYS_MAX_CMDLEN_CMD) CONFIGURE_ENV+= lt_cv_sys_max_cmd_len=${_OPSYS_MAX_CMDLEN_CMD:sh} . endif .endif _EXTRACT_COOKIE= ${WRKDIR}/.extract_done _TOOLS_COOKIE= ${WRKDIR}/.tools_done _WRAPPER_COOKIE= ${WRKDIR}/.wrapper_done _PATCH_COOKIE= ${WRKDIR}/.patch_done _CONFIGURE_COOKIE= ${WRKDIR}/.configure_done _BUILD_COOKIE= ${WRKDIR}/.build_done _TEST_COOKIE= ${WRKDIR}/.test_done _INSTALL_COOKIE= ${WRKDIR}/.install_done _PACKAGE_COOKIE= ${WRKDIR}/.package_done _INTERACTIVE_COOKIE= .interactive_stage _NULL_COOKIE= ${WRKDIR}/.null # Miscellaneous overridable commands: SHCOMMENT?= ${ECHO_MSG} >/dev/null '***' LIBABISUFFIX?= TOUCH_FLAGS?= -f # Figure out where the local mtree file is MTREE_FILE?= ${PKGSRCDIR}/mk/platform/${OPSYS}.pkg.dist MTREE_ARGS?= -U -f ${MTREE_FILE} -d -e -p # Debugging levels for this file, dependent on PKG_DEBUG_LEVEL definition # 0 == normal, default, quiet operation # 1 == all shell commands echoed before invocation # 2 == shell "set -x" operation PKG_DEBUG_LEVEL?= 0 _PKG_SILENT= @ _PKG_DEBUG= # empty _PKG_DEBUG_SCRIPT= # empty .if ${PKG_DEBUG_LEVEL} > 0 _PKG_SILENT= # empty .endif .if ${PKG_DEBUG_LEVEL} > 1 _PKG_DEBUG= set -x; _PKG_DEBUG_SCRIPT= ${SH} -x .endif # A few aliases for *-install targets INSTALL= ${TOOLS_INSTALL} # XXX override sys.mk INSTALL_PROGRAM?= \ ${INSTALL} ${COPY} ${_STRIPFLAG_INSTALL} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE} INSTALL_GAME?= \ ${INSTALL} ${COPY} ${_STRIPFLAG_INSTALL} -o ${GAMEOWN} -g ${GAMEGRP} -m ${GAMEMODE} INSTALL_SCRIPT?= \ ${INSTALL} ${COPY} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE} INSTALL_LIB?= \ ${INSTALL} ${COPY} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE} INSTALL_DATA?= \ ${INSTALL} ${COPY} -o ${SHAREOWN} -g ${SHAREGRP} -m ${SHAREMODE} INSTALL_GAME_DATA?= \ ${INSTALL} ${COPY} -o ${GAMEOWN} -g ${GAMEGRP} -m ${GAMEDATAMODE} INSTALL_MAN?= \ ${INSTALL} ${COPY} -o ${MANOWN} -g ${MANGRP} -m ${MANMODE} INSTALL_PROGRAM_DIR?= \ ${INSTALL} -d -o ${BINOWN} -g ${BINGRP} -m ${PKGDIRMODE} INSTALL_SCRIPT_DIR?= \ ${INSTALL_PROGRAM_DIR} INSTALL_LIB_DIR?= \ ${INSTALL_PROGRAM_DIR} INSTALL_DATA_DIR?= \ ${INSTALL} -d -o ${SHAREOWN} -g ${SHAREGRP} -m ${PKGDIRMODE} INSTALL_MAN_DIR?= \ ${INSTALL} -d -o ${MANOWN} -g ${MANGRP} -m ${PKGDIRMODE} INSTALL_MACROS= BSD_INSTALL_PROGRAM=${INSTALL_PROGRAM:Q} \ BSD_INSTALL_SCRIPT=${INSTALL_SCRIPT:Q} \ BSD_INSTALL_LIB=${INSTALL_LIB:Q} \ BSD_INSTALL_DATA=${INSTALL_DATA:Q} \ BSD_INSTALL_MAN=${INSTALL_MAN:Q} \ BSD_INSTALL=${INSTALL:Q} \ BSD_INSTALL_PROGRAM_DIR=${INSTALL_PROGRAM_DIR:Q} \ BSD_INSTALL_SCRIPT_DIR=${INSTALL_SCRIPT_DIR:Q} \ BSD_INSTALL_LIB_DIR=${INSTALL_LIB_DIR:Q} \ BSD_INSTALL_DATA_DIR=${INSTALL_DATA_DIR:Q} \ BSD_INSTALL_MAN_DIR=${INSTALL_MAN_DIR:Q} \ BSD_INSTALL_GAME=${INSTALL_GAME:Q} \ BSD_INSTALL_GAME_DATA=${INSTALL_GAME_DATA:Q} MAKE_ENV+= ${INSTALL_MACROS} SCRIPTS_ENV+= ${INSTALL_MACROS} # The user can override the NO_PACKAGE by specifying this from # the make command line .if defined(FORCE_PACKAGE) . undef NO_PACKAGE .endif # Set PLIST_SUBST to substitute "${variable}" to "value" in PLIST PLIST_SUBST+= OPSYS=${OPSYS} \ OS_VERSION=${OS_VERSION} \ MACHINE_ARCH=${MACHINE_ARCH} \ MACHINE_GNU_ARCH=${MACHINE_GNU_ARCH} \ MACHINE_GNU_PLATFORM=${MACHINE_GNU_PLATFORM} \ LN=${LN:Q} \ LOWER_VENDOR=${LOWER_VENDOR} \ LOWER_OPSYS=${LOWER_OPSYS} \ LOWER_OS_VERSION=${LOWER_OS_VERSION} \ PKGBASE=${PKGBASE} \ PKGNAME=${PKGNAME_NOREV} \ PKGLOCALEDIR=${PKGLOCALEDIR} \ PKGVERSION=${PKGVERSION:C/nb[0-9]*$//} \ LOCALBASE=${LOCALBASE} \ VIEWBASE=${VIEWBASE} \ X11BASE=${X11BASE} \ X11PREFIX=${X11PREFIX} \ SVR4_PKGNAME=${SVR4_PKGNAME} \ CHGRP=${CHGRP:Q} \ CHMOD=${CHMOD:Q} \ CHOWN=${CHOWN:Q} \ MKDIR=${MKDIR:Q} \ RMDIR=${RMDIR:Q} \ RM=${RM:Q} \ TRUE=${TRUE:Q} \ QMAILDIR=${QMAILDIR} \ PKGMANDIR=${PKGMANDIR} # Handle alternatives # .include "../../mk/alternatives.mk" # CONF_DEPENDS notes a dependency where the config directory for the # package matches the dependency's config directory. CONF_DEPENDS is # only meaningful if ${PKG_INSTALLATION_TYPE} == "pkgviews". # CONF_DEPENDS?= # empty .if !empty(CONF_DEPENDS) USE_PKGINSTALL= yes .endif .if defined(USE_PKGINSTALL) && !empty(USE_PKGINSTALL:M[yY][eE][sS]) . include "../../mk/install/bsd.pkginstall.mk" .endif # Set INSTALL_FILE to be the name of any INSTALL file .if !defined(INSTALL_FILE) && exists(${PKGDIR}/INSTALL) INSTALL_FILE= ${PKGDIR}/INSTALL .endif # Set DEINSTALL_FILE to be the name of any DEINSTALL file .if !defined(DEINSTALL_FILE) && exists(${PKGDIR}/DEINSTALL) DEINSTALL_FILE= ${PKGDIR}/DEINSTALL .endif # If MESSAGE hasn't been defined, then set MESSAGE_SRC to be a space-separated # list of files to be concatenated together to generate the MESSAGE file. # .if !defined(MESSAGE_SRC) && !defined(MESSAGE) . if exists(${PKGDIR}/MESSAGE) MESSAGE_SRC= ${PKGDIR}/MESSAGE . else . if exists(${PKGDIR}/MESSAGE.common) MESSAGE_SRC= ${PKGDIR}/MESSAGE.common . endif . if exists(${PKGDIR}/MESSAGE.${OPSYS}) MESSAGE_SRC+= ${PKGDIR}/MESSAGE.${OPSYS} . endif . if exists(${PKGDIR}/MESSAGE.${MACHINE_ARCH:C/i[3-6]86/i386/g}) MESSAGE_SRC+= ${PKGDIR}/MESSAGE.${MACHINE_ARCH:C/i[3-6]86/i386/g} . endif . if exists(${PKGDIR}/MESSAGE.${OPSYS}-${MACHINE_ARCH:C/i[3-6]86/i386/g}) MESSAGE_SRC+= ${PKGDIR}/MESSAGE.${OPSYS}-${MACHINE_ARCH:C/i[3-6]86/i386/g} . endif . endif .endif .if defined(MESSAGE_SRC) MESSAGE= ${PKG_DB_TMPDIR}/+DISPLAY # Set MESSAGE_SUBST to substitute "${variable}" to "value" in MESSAGE MESSAGE_SUBST+= PKGNAME=${PKGNAME} \ PKGBASE=${PKGBASE} \ PREFIX=${PREFIX} \ LOCALBASE=${LOCALBASE} \ VIEWBASE=${VIEWBASE} \ X11PREFIX=${X11PREFIX} \ X11BASE=${X11BASE} \ PKG_SYSCONFDIR=${PKG_SYSCONFDIR} \ ROOT_GROUP=${ROOT_GROUP} \ ROOT_USER=${ROOT_USER} \ QMAILDIR=${QMAILDIR} MESSAGE_SUBST_SED= ${MESSAGE_SUBST:S/=/}!/:S/$/!g/:S/^/ -e s!\\\${/} .endif # If pkgsrc is supposed to ensure that tests are run before installation # of the package, then the build targets should be "build test", otherwise # just "build" suffices. _PKGSRC_BUILD_TARGETS is used in the "all", # "install", and "uptodate-digest" targets. # .if !empty(PKGSRC_RUN_TEST:M[yY][eE][sS]) _PKGSRC_BUILD_TARGETS= build test .else _PKGSRC_BUILD_TARGETS= build .endif .PHONY: uptodate-digest uptodate-digest: .if !empty(USE_DIGEST:M[yY][eE][sS]) ${_PKG_SILENT}${_PKG_DEBUG} \ if [ -f ${DISTINFO_FILE} -a \( ! -f ${DIGEST} -o ${DIGEST_VERSION} -lt ${DIGEST_REQD} \) ]; then \ { cd ${PKGSRCDIR}/pkgtools/digest; \ ${MAKE} clean; \ if [ -f ${DIGEST} ]; then \ ${MAKE} ${MAKEFLAGS} deinstall; \ fi; \ ${MAKE} ${MAKEFLAGS} ${_PKGSRC_BUILD_TARGETS}; \ if [ -f ${DIGEST} ]; then \ ${MAKE} ${MAKEFLAGS} deinstall; \ fi; \ ${MAKE} ${MAKEFLAGS} ${DEPENDS_TARGET}; \ ${MAKE} ${MAKEFLAGS} clean; } \ fi .else @${DO_NADA} .endif .if !defined(PKG_ARGS_COMMON) PKG_ARGS_COMMON= -v -c -${COMMENT:Q}" " -d ${DESCR} -f ${PLIST} PKG_ARGS_COMMON+= -l -b ${BUILD_VERSION_FILE} -B ${BUILD_INFO_FILE} PKG_ARGS_COMMON+= -s ${SIZE_PKG_FILE} -S ${SIZE_ALL_FILE} PKG_ARGS_COMMON+= -P "`${MAKE} ${MAKEFLAGS} run-depends-list | ${SORT} -u`" . if defined(CONFLICTS) && (${PKG_INSTALLATION_TYPE} == "overwrite") PKG_ARGS_COMMON+= -C "${CONFLICTS}" . endif . if defined(INSTALL_FILE) PKG_ARGS_COMMON+= -i ${INSTALL_FILE} . endif . if defined(DEINSTALL_FILE) PKG_ARGS_COMMON+= -k ${DEINSTALL_FILE} . endif . if defined(MESSAGE) PKG_ARGS_COMMON+= -D ${MESSAGE} . endif . if !defined(NO_MTREE) PKG_ARGS_COMMON+= -m ${MTREE_FILE} . endif . if defined(PKG_PRESERVE) PKG_ARGS_COMMON+= -n ${PRESERVE_FILE} . endif PKG_ARGS_INSTALL= -p ${PREFIX} ${PKG_ARGS_COMMON} PKG_ARGS_BINPKG= -p ${PREFIX:S/^${DESTDIR}//} -L ${PREFIX} ${PKG_ARGS_COMMON} .endif # !PKG_ARGS_COMMON .if ${PKG_INSTALLATION_TYPE} == "pkgviews" PKG_ARGS_INSTALL+= -U # don't update the pkgdb.byfile.db PKG_ARGS_BINPKG+= -E # create an empty views file in the binpkg .endif # Define SMART_MESSAGES in /etc/mk.conf for messages giving the tree # of dependencies for building, and the current target. .if defined(SMART_MESSAGES) _PKGSRC_IN?= ===> ${.TARGET} [${PKGNAME}${_PKGSRC_DEPS}] === .else _PKGSRC_IN?= === .endif # Used to print all the '===>' style prompts - override this to turn them off. ECHO_MSG?= ${ECHO} # How to do nothing. Override if you, for some strange reason, would rather # do something. DO_NADA?= ${TRUE} # If this host is behind a filtering firewall, use passive ftp(1) .if defined(PASSIVE_FETCH) FETCH_BEFORE_ARGS += -p .endif # Include popular master sites .include "../../mk/bsd.sites.mk" .if defined(DIST_SUBDIR) _MASTER_SITE_BACKUP:= ${MASTER_SITE_BACKUP:=${DIST_SUBDIR}/} . if defined(MASTER_SITE_OVERRIDE) _MASTER_SITE_OVERRIDE:= ${MASTER_SITE_OVERRIDE:=${DIST_SUBDIR}/} . endif # MASTER_SITE_OVERRIDE .else # !DIST_SUBDIR _MASTER_SITE_BACKUP:= ${MASTER_SITE_BACKUP} . if defined(MASTER_SITE_OVERRIDE) _MASTER_SITE_OVERRIDE:= ${MASTER_SITE_OVERRIDE} . endif # MASTER_SITE_OVERRIDE .endif # DIST_SUBDIR # Where to put distfiles that don't have any other master site MASTER_SITE_LOCAL?= \ ${MASTER_SITE_BACKUP:=LOCAL_PORTS/} \ ALLFILES?= ${DISTFILES} ${PATCHFILES} CKSUMFILES?= ${ALLFILES} .for __tmp__ in ${IGNOREFILES} CKSUMFILES:= ${CKSUMFILES:N${__tmp__}} .endfor # List of all files, with ${DIST_SUBDIR} in front. Used for fetch and checksum. .if defined(DIST_SUBDIR) . if ${CKSUMFILES} != "" _CKSUMFILES?= ${CKSUMFILES:S/^/${DIST_SUBDIR}\//} . endif . if !empty(DISTFILES) _DISTFILES?= ${DISTFILES:S/^/${DIST_SUBDIR}\//} . else _DISTFILES?= # empty . endif . if defined(IGNOREFILES) && !empty(IGNOREFILES) _IGNOREFILES?= ${IGNOREFILES:S/^/${DIST_SUBDIR}\//} . endif . if defined(PATCHFILES) && !empty(PATCHFILES) _PATCHFILES?= ${PATCHFILES:S/^/${DIST_SUBDIR}\//} . else _PATCHFILES?= # empty . endif .else _CKSUMFILES?= ${CKSUMFILES} _DISTFILES?= ${DISTFILES} _IGNOREFILES?= ${IGNOREFILES} _PATCHFILES?= ${PATCHFILES} .endif _ALLFILES?= ${_DISTFILES} ${_PATCHFILES} BUILD_DEFS+= _DISTFILES _PATCHFILES .if defined(GNU_CONFIGURE) HAS_CONFIGURE= yes GNU_CONFIGURE_PREFIX?= ${PREFIX} CONFIGURE_ARGS+= --prefix=${GNU_CONFIGURE_PREFIX} USE_GNU_CONFIGURE_HOST?= yes . if !empty(USE_GNU_CONFIGURE_HOST:M[yY][eE][sS]) CONFIGURE_ARGS+= --host=${MACHINE_GNU_PLATFORM} . endif CONFIGURE_HAS_INFODIR?= yes . if !empty(INFO_FILES) && !empty(CONFIGURE_HAS_INFODIR:M[yY][eE][sS]) CONFIGURE_ARGS+= --infodir=${PREFIX}/${INFO_DIR} . endif CONFIGURE_HAS_MANDIR?= yes GNU_CONFIGURE_MANDIR?= ${PREFIX}/${PKGMANDIR} . if !empty(CONFIGURE_HAS_MANDIR:M[yY][eE][sS]) CONFIGURE_ARGS+= --mandir=${GNU_CONFIGURE_MANDIR:Q} . endif # # By default, override config.guess and config.sub for GNU configure # packages. pkgsrc's updated versions of these scripts allows GNU # configure to recognise NetBSD ports such as shark. # CONFIG_GUESS_OVERRIDE?= \ config.guess */config.guess */*/config.guess CONFIG_SUB_OVERRIDE?= \ config.sub */config.sub */*/config.sub CONFIG_RPATH_OVERRIDE?= # set by platform file as needed # # By default, override config.status for GNU configure packages. We # never want it to execute after the configure phase has ended as it # might overwrite any post-configure changes we might have made to the # generated files. # CONFIG_STATUS_OVERRIDE?= \ config.status */config.status */*/config.status .endif # # Config file related settings - see doc/pkgsrc.txt # PKG_SYSCONFVAR?= ${PKGBASE} PKG_SYSCONFSUBDIR?= # empty .if ${PKG_INSTALLATION_TYPE} == "overwrite" PKG_SYSCONFDEPOTBASE= # empty PKG_SYSCONFBASEDIR= ${PKG_SYSCONFBASE} .else . if !empty(PKG_SYSCONFBASE:M${PREFIX}) || \ !empty(PKG_SYSCONFBASE:M${PREFIX}/*) PKG_SYSCONFDEPOTBASE= # empty PKG_SYSCONFBASEDIR= ${PKG_SYSCONFBASE} . if !empty(CONF_DEPENDS) _PLIST_IGNORE_FILES+= ${PKG_SYSCONFDIR:S,^${PREFIX}/,,} . endif . else PKG_SYSCONFDEPOTBASE= ${PKG_SYSCONFBASE}/${DEPOT_SUBDIR} PKG_SYSCONFBASEDIR= ${PKG_SYSCONFDEPOTBASE}/${PKGNAME} . endif .endif .if empty(PKG_SYSCONFSUBDIR) DFLT_PKG_SYSCONFDIR:= ${PKG_SYSCONFBASEDIR} .else DFLT_PKG_SYSCONFDIR:= ${PKG_SYSCONFBASEDIR}/${PKG_SYSCONFSUBDIR} .endif PKG_SYSCONFDIR= ${DFLT_PKG_SYSCONFDIR} .if defined(PKG_SYSCONFDIR.${PKG_SYSCONFVAR}) PKG_SYSCONFDIR= ${PKG_SYSCONFDIR.${PKG_SYSCONFVAR}} PKG_SYSCONFBASEDIR= ${PKG_SYSCONFDIR.${PKG_SYSCONFVAR}} PKG_SYSCONFDEPOTBASE= # empty .endif ALL_ENV+= PKG_SYSCONFDIR=${PKG_SYSCONFDIR:Q} BUILD_DEFS+= PKG_SYSCONFBASEDIR PKG_SYSCONFDIR # These are all of the tools use by pkgsrc Makefiles. This should # eventually be split up into lists of tools required by different # phases of a pkgsrc build. # USE_TOOLS+= \ [ awk basename cat chgrp chmod chown cmp cp cut dirname echo \ egrep env false file find grep head hostname id install ln ls \ mkdir mv pax pwd rm rmdir sed sh sort tail test touch tr true \ wc xargs # bsd.wrapper.mk USE_TOOLS+= expr # bsd.bulk-pkg.mk uses certain tools .if defined(BATCH) USE_TOOLS+= tee tsort .endif .if !defined(NO_MTREE) USE_TOOLS+= mtree .endif .if defined(PKG_PRESERVE) USE_TOOLS+= date .endif # We need a mail command to send mail to ${PKGSRC_MESSAGE_RECIPIENTS}. .if !empty(PKGSRC_MESSAGE_RECIPIENTS) USE_TOOLS+= mail .endif # We need shlock and sleep if we're using locking to synchronize multiple # builds over the same pkgsrc tree. # .if ${PKGSRC_LOCKTYPE} != "none" USE_TOOLS+= shlock sleep .endif # If MANZ is defined, then we want the final man pages to be compressed. # If MANZ is not defined, then we want the final man pages to be # uncompressed. # # We need to figure out if during installation, we need either gunzip or # gzip to decompress or compress the installed man pages. If a package # sets MANCOMPRESSED to "yes" or "no", then it's an indication to the # install code that the package itself installed the man pages either # compressed or uncompressed. If a package sets MANCOMPRESSED_IF_MANZ, # then the package uses BSD-style makefiles, so we need to determine if # the BSD-style makefile causes the man pages to be compressed or not. # .if !defined(_MANCOMPRESSED) . if defined(MANCOMPRESSED) && !empty(MANCOMPRESSED:M[yY][eE][sS]) _MANCOMPRESSED= yes . else _MANCOMPRESSED= no . endif . if defined(MANCOMPRESSED_IF_MANZ) && defined(PKGMAKECONF) _MANCOMPRESSED!= \ { ${ECHO} ".include \""${PKGMAKECONF:Q}"\""; \ ${ECHO} "all:"; \ ${ECHO} ".if defined(MANZ)"; \ ${ECHO} " @${ECHO} yes"; \ ${ECHO} ".else"; \ ${ECHO} " @${ECHO} no"; \ ${ECHO} ".endif"; \ } | ${MAKE} -f - all . endif .endif _MANZ= ${MANZ:Dyes:Uno} MAKEVARS+= _MANCOMPRESSED _MANZ .if !empty(_MANCOMPRESSED:M[yY][eE][sS]) && empty(_MANZ:M[yY][eE][sS]) USE_TOOLS+= gunzip .endif .if empty(_MANCOMPRESSED:M[yY][eE][sS]) && !empty(_MANZ:M[yY][eE][sS]) USE_TOOLS+= gzip .endif # Extract .include "../../mk/bsd.pkg.extract.mk" # Patch .include "../../mk/bsd.pkg.patch.mk" # Check .include "../../mk/bsd.pkg.check.mk" # Tools .include "../../mk/tools/bsd.tools.mk" # Unprivileged builds .include "../../mk/unprivileged.mk" # If NO_BUILD is defined, default to not needing a compiler. .if defined(NO_BUILD) USE_LANGUAGES?= # empty .endif # Get the proper dependencies and set the PATH to use the compiler # named in PKGSRC_COMPILER. # .include "../../mk/compiler.mk" .include "../../mk/wrapper/bsd.wrapper.mk" .if defined(RECOMMENDED) . if !empty(IGNORE_RECOMMENDED:M[nN][oO]) DEPENDS+= ${RECOMMENDED} . else BUILD_DEFS+= IGNORE_RECOMMENDED . endif .endif # Remove some redundant dependencies from the DEPENDS list. .include "../../mk/reduce-depends.mk" DEPENDS:= ${REDUCED_DEPENDS} # Find out the PREFIX of dependencies where the PREFIX is needed at build time. .if defined(EVAL_PREFIX) FIND_PREFIX:= ${EVAL_PREFIX} . include "../../mk/find-prefix.mk" .endif .if !defined(_PATH_ORIG) _PATH_ORIG:= ${PATH} MAKEFLAGS+= _PATH_ORIG=${_PATH_ORIG:Q} .endif .if !empty(PREPEND_PATH) # This is very Special. Because PREPEND_PATH is set with += in reverse order, # the awk expression reverses the order again (since bootstrap bmake doesn't # yet support the :[-1..1] construct). _PATH_CMD= ${ECHO} `${ECHO} ${PREPEND_PATH:Q} | ${AWK} '{ORS=":";for (i=NF;i>0;i--) print $$i}'`${_PATH_ORIG} PATH= ${_PATH_CMD:sh} # DOES NOT use :=, to defer evaluation .endif # Add these bits to the environment use when invoking the sub-make # processes for build-related phases. # BUILD_ENV+= PATH=${PATH:Q} .MAIN: all ################################################################ # Many ways to disable a package. # # Ignore packages that can't be resold if building for a CDROM. # # Don't build a package if it's restricted and we don't want to # get into that. # # Don't build any package that utilizes strong cryptography, for # when the law of the land forbids it. # # Don't attempt to build packages against X if we don't have X. # # Don't build a package if it's broken. ################################################################ .if !defined(NO_SKIP) . if (defined(NO_BIN_ON_CDROM) && defined(FOR_CDROM)) PKG_FAIL_REASON+= "${PKGNAME} may not be placed in binary form on a CDROM:" \ " "${NO_BIN_ON_CDROM:Q} . endif . if (defined(NO_SRC_ON_CDROM) && defined(FOR_CDROM)) PKG_FAIL_REASON+= "${PKGNAME} may not be placed in source form on a CDROM:" \ " "${NO_SRC_ON_CDROM:Q} . endif . if (defined(RESTRICTED) && defined(NO_RESTRICTED)) PKG_FAIL_REASON+= "${PKGNAME} is restricted:" \ " "${RESTRICTED:Q} . endif . if !(${MKCRYPTO} == "YES" || ${MKCRYPTO} == yes) . if defined(CRYPTO) PKG_FAIL_REASON+= "${PKGNAME} may not be built, because it utilizes strong cryptography" . endif . endif . if defined(USE_X11) && !exists(${X11BASE}) . if ${X11_TYPE} == "native" PKG_FAIL_REASON+= "${PKGNAME} uses X11, but ${X11BASE} not found" . else ${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${X11BASE} ${_PKG_SILENT}${_PKG_DEBUG}${CHOWN} ${ROOT_USER}:${ROOT_GROUP} ${X11BASE} ${_PKG_SILENT}${_PKG_DEBUG}${CHMOD} ${PKGDIRMODE} ${X11BASE} . endif . endif . if defined(BROKEN) PKG_FAIL_REASON+= "${PKGNAME} is marked as broken:" ${BROKEN:Q} . endif . if defined(LICENSE) . if defined(ACCEPTABLE_LICENSES) . for _lic in ${ACCEPTABLE_LICENSES} . if ${LICENSE} == "${_lic}" _ACCEPTABLE= yes . endif # LICENSE == _lic . endfor # _lic . endif # ACCEPTABLE_LICENSES . if !defined(_ACCEPTABLE) PKG_FAIL_REASON+= "${PKGNAME} has an unacceptable license: ${LICENSE}." \ " To view the license, enter \"${MAKE} show-license\"." \ " To indicate acceptance, add this line to your /etc/mk.conf:" \ " ACCEPTABLE_LICENSES+=${LICENSE}" . endif # _ACCEPTABLE . endif # LICENSE # Define __PLATFORM_OK only if the OS matches the pkg's allowed list. . if defined(ONLY_FOR_PLATFORM) && !empty(ONLY_FOR_PLATFORM) . for __tmp__ in ${ONLY_FOR_PLATFORM} . if ${MACHINE_PLATFORM:M${__tmp__}} != "" __PLATFORM_OK?= yes . endif # MACHINE_PLATFORM . endfor # __tmp__ . else # !ONLY_FOR_PLATFORM __PLATFORM_OK?= yes . endif # ONLY_FOR_PLATFORM . for __tmp__ in ${NOT_FOR_PLATFORM} . if ${MACHINE_PLATFORM:M${__tmp__}} != "" . undef __PLATFORM_OK . endif # MACHINE_PLATFORM . endfor # __tmp__ . if !defined(__PLATFORM_OK) PKG_SKIP_REASON+= "${PKGNAME} is not available for ${MACHINE_PLATFORM}" . endif # !__PLATFORM_OK # # Now print some error messages that we know we should ignore the pkg # . if defined(PKG_FAIL_REASON) || defined(PKG_SKIP_REASON) fetch checksum extract patch configure all build install package \ update install-depends: . if defined(SKIP_SILENT) @${DO_NADA} . else @for str in ${PKG_FAIL_REASON} ${PKG_SKIP_REASON}; do \ ${ECHO} "${_PKGSRC_IN}> $$str"; \ done . endif . if defined(PKG_FAIL_REASON) @${FALSE} . endif . endif # SKIP .endif # !NO_SKIP # Add these defs to the ones dumped into +BUILD_DEFS BUILD_DEFS+= PKGPATH BUILD_DEFS+= OPSYS OS_VERSION MACHINE_ARCH MACHINE_GNU_ARCH BUILD_DEFS+= CPPFLAGS CFLAGS FFLAGS LDFLAGS BUILD_DEFS+= CONFIGURE_ENV CONFIGURE_ARGS BUILD_DEFS+= OBJECT_FMT LICENSE RESTRICTED BUILD_DEFS+= NO_SRC_ON_FTP NO_SRC_ON_CDROM BUILD_DEFS+= NO_BIN_ON_FTP NO_BIN_ON_CDROM .if defined(OSVERSION_SPECIFIC) BUILD_DEFS+= OSVERSION_SPECIFIC .endif # OSVERSION_SPECIFIC .PHONY: all .if !target(all) all: ${_PKGSRC_BUILD_TARGETS} .endif .if !defined(DEPENDS_TARGET) . if make(package) DEPENDS_TARGET= package . elif make(update) . if defined(UPDATE_TARGET) && ${UPDATE_TARGET} == "replace" DEPENDS_TARGET= ${UPDATE_TARGET} . else DEPENDS_TARGET= update . endif . elif make(bin-install) DEPENDS_TARGET= bin-install . else DEPENDS_TARGET= reinstall . endif .endif .if !defined(UPDATE_TARGET) . if ${DEPENDS_TARGET} == "update" . if make(package) UPDATE_TARGET= package . else UPDATE_TARGET= install . endif . else UPDATE_TARGET= ${DEPENDS_TARGET} . endif .endif UPDATE_RUNNING?= NO ################################################################ # The following are used to create easy dummy targets for # disabling some bit of default target behavior you don't want. # They still check to see if the target exists, and if so don't # do anything, since you might want to set this globally for a # group of packages in a Makefile.inc, but still be able to # override from an individual Makefile. ################################################################ # Disable checksum .PHONY: checksum .if (defined(NO_CHECKSUM) || exists(${_EXTRACT_COOKIE})) && !target(checksum) checksum: fetch @${DO_NADA} .endif # Disable wrapper .PHONY: wrapper .if defined(NO_BUILD) && !target(wrapper) wrapper: tools ${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${_WRAPPER_COOKIE} .endif # Disable configure .PHONY: configure .if defined(NO_CONFIGURE) && !target(configure) configure: wrapper ${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${_CONFIGURE_COOKIE} .endif # Disable build .PHONY: build .if defined(NO_BUILD) && !target(build) build: configure ${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${_BUILD_COOKIE} .endif # Disable install .PHONY: install .if defined(NO_INSTALL) && !target(install) install: build ${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${_INSTALL_COOKIE} .endif # Disable package .PHONY: package .if defined(NO_PACKAGE) && !target(package) package: . if defined(SKIP_SILENT) @${DO_NADA} . else @${ECHO_MSG} "${_PKGSRC_IN}> ${PKGNAME} may not be packaged: ${NO_PACKAGE}." . endif .endif ################################################################ # More standard targets start here. # # These are the body of the build/install framework. If you are # not happy with the default actions, and you can't solve it by # adding pre-* or post-* targets/scripts, override these. ################################################################ ### ### _RESUME_TRANSFER: ### ### Macro to resume a previous transfer, needs to have defined ### the following options in mk.conf: ### ### PKG_RESUME_TRANSFERS ### FETCH_RESUME_ARGS (if FETCH_CMD != default) ### FETCH_OUTPUT_ARGS (if FETCH_CMD != default) ### ### For example if you want to use wget (pkgsrc/net/wget): ### ### FETCH_CMD=wget ### FETCH_RESUME_ARGS=-c ### FETCH_OUTPUT_ARGS=-O ### ### How does it work? ### ### FETCH_CMD downloads the file and saves it temporally into $$bfile.temp ### if the checksum match the correct one, $$bfile.temp is renamed to ### the original name. ### _RESUME_TRANSFER= \ ofile="${DISTDIR}/${DIST_SUBDIR}/$$bfile"; \ tfile="${DISTDIR}/${DIST_SUBDIR}/$$bfile.temp"; \ tsize=`${AWK} '/^Size/ && $$2 == '"\"($$file)\""' { print $$4 }' ${DISTINFO_FILE}` || ${TRUE}; \ osize=`${WC} -c < $$ofile`; \ \ case "$$tsize" in \ "") ${ECHO_MSG} "No size in distinfo file (${DISTINFO_FILE})"; \ break;; \ esac; \ \ if [ "$$osize" -eq "$$tsize" ]; then \ if [ -f "$$tfile" ]; then \ ${RM} $$tfile; \ fi; \ need_fetch=no; \ elif [ "$$osize" -lt "$$tsize" -a ! -f "$$tfile" ]; then \ ${CP} $$ofile $$tfile; \ dsize=`${WC} -c < $$tfile`; \ need_fetch=yes; \ elif [ -f "$$tfile" -a "$$dsize" -gt "$$ossize" ]; then \ dsize=`${WC} -c < $$tfile`; \ need_fetch=yes; \ else \ if [ -f "$$tfile" ]; then \ dsize=`${WC} -c < $$tfile`; \ fi; \ need_fetch=yes; \ fi; \ if [ "$$need_fetch" = "no" ]; then \ break; \ elif [ -f "$$tfile" -a "$$dsize" -eq "$$tsize" ]; then \ ${MV} $$tfile $$ofile; \ break; \ elif [ -n "$$ftp_proxy" -o -n "$$http_proxy" ]; then \ ${ECHO_MSG} "===> Resume is not supported by ftp(1) using http/ftp proxies."; \ break; \ elif [ "$$need_fetch" = "yes" -a "$$dsize" -lt "$$tsize" ]; then \ if [ "${FETCH_CMD:T}" != "ftp" -a -z "${FETCH_RESUME_ARGS}" ]; then \ ${ECHO_MSG} "=> Resume transfers are not supported, FETCH_RESUME_ARGS is empty."; \ break; \ else \ for res_site in $$sites; do \ if [ -z "${FETCH_OUTPUT_ARGS}" ]; then \ ${ECHO_MSG} "=> FETCH_OUTPUT_ARGS has to be defined."; \ break; \ fi; \ ${ECHO_MSG} "=> $$bfile not completed, resuming:"; \ ${ECHO_MSG} "=> Downloaded: $$dsize Total: $$tsize."; \ ${ECHO_MSG}; \ cd ${DISTDIR}; \ ${FETCH_CMD} ${FETCH_BEFORE_ARGS} ${FETCH_RESUME_ARGS} \ ${FETCH_OUTPUT_ARGS} $${bfile}.temp $${res_site}$${bfile}; \ if [ $$? -eq 0 ]; then \ ndsize=`${WC} -c < $$tfile`; \ if [ "$$tsize" -eq "$$ndsize" ]; then \ ${MV} $$tfile $$ofile; \ fi; \ break; \ fi; \ done; \ fi; \ elif [ "$$dsize" -gt "$$tsize" ]; then \ ${ECHO_MSG} "==> Downloaded file larger than the recorded size."; \ break; \ fi # # Define the elementary fetch macros. # _FETCH_FILE= \ if [ ! -f $$file -a ! -f $$bfile -a ! -h $$bfile ]; then \ ${ECHO_MSG} "=> $$bfile doesn't seem to exist on this system."; \ if [ ! -w ${_DISTDIR}/. ]; then \ ${ECHO_MSG} "=> Can't download to ${_DISTDIR} (permission denied?)."; \ exit 1; \ fi; \ for site in $$sites; do \ ${ECHO_MSG} "=> Attempting to fetch $$bfile from $${site}."; \ if [ -f ${DISTINFO_FILE} ]; then \ ${AWK} 'NF == 5 && $$1 == "Size" && $$2 == "('$$bfile')" { printf("=> [%s %s]\n", $$4, $$5) }' ${DISTINFO_FILE}; \ fi; \ if ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${bfile} ${FETCH_AFTER_ARGS}; then \ if [ -n "${FAILOVER_FETCH}" -a -f ${DISTINFO_FILE} -a -f ${_DISTDIR}/$$bfile ]; then \ alg=`${AWK} 'NF == 4 && $$2 == "('$$file')" && $$3 == "=" {print $$1; exit}' ${DISTINFO_FILE}`; \ if [ -z "$$alg" ]; then \ alg=${PATCH_DIGEST_ALGORITHM};\ fi; \ CKSUM=`${DIGEST} $$alg < ${_DISTDIR}/$$bfile`; \ CKSUM2=`${AWK} '$$1 == "'$$alg'" && $$2 == "('$$file')" {print $$4; exit}' <${DISTINFO_FILE}`; \ if [ "$$CKSUM" = "$$CKSUM2" -o "$$CKSUM2" = "IGNORE" ]; then \ break; \ else \ ${ECHO_MSG} "=> Checksum failure - trying next site."; \ fi; \ elif [ ! -f ${_DISTDIR}/$$bfile ]; then \ ${ECHO_MSG} "=> FTP didn't fetch expected file, trying next site." ; \ else \ break; \ fi; \ fi \ done; \ if [ ! -f ${_DISTDIR}/$$bfile ]; then \ ${ECHO_MSG} "=> Couldn't fetch $$bfile - please try to retrieve this";\ ${ECHO_MSG} "=> file manually into ${_DISTDIR} and try again."; \ exit 1; \ fi; \ fi _CHECK_DIST_PATH= \ if [ "X${DIST_PATH}" != "X" ]; then \ for d in "" ${DIST_PATH:S/:/ /g}; do \ case $$d in "" | ${DISTDIR}) continue;; esac; \ if [ -f $$d/${DIST_SUBDIR}/$$bfile ]; then \ ${ECHO} "Using $$d/${DIST_SUBDIR}/$$bfile"; \ ${RM} -f $$bfile; \ ${LN} -s $$d/${DIST_SUBDIR}/$$bfile $$bfile; \ break; \ fi; \ done; \ fi # # Set up ORDERED_SITES to work out the exact list of sites for every file, # using the dynamic sites script, or sorting according to the master site # list or the patterns in MASTER_SORT or MASTER_SORT_REGEX as appropriate. # No actual sorting is done until ORDERED_SITES is expanded. # .if defined(MASTER_SORT) || defined(MASTER_SORT_REGEX) MASTER_SORT?= MASTER_SORT_REGEX?= MASTER_SORT_REGEX+= ${MASTER_SORT:S/./\\./g:C/.*/:\/\/[^\/]*&\//} MASTER_SORT_AWK= BEGIN { RS = " "; ORS = " "; IGNORECASE = 1 ; gl = "${MASTER_SORT_REGEX:S/\\/\\\\/g}"; } . for srt in ${MASTER_SORT_REGEX} MASTER_SORT_AWK+= /${srt:C/\//\\\//g}/ { good["${srt:S/\\/\\\\/g}"] = good["${srt:S/\\/\\\\/g}"] " " $$0 ; next; } . endfor MASTER_SORT_AWK+= { rest = rest " " $$0; } END { n=split(gl, gla); for(i=1;i<=n;i++) { print good[gla[i]]; } print rest; } SORT_SITES_CMD= ${ECHO} $$unsorted_sites | ${AWK} '${MASTER_SORT_AWK}' ORDERED_SITES= ${_MASTER_SITE_OVERRIDE} `${SORT_SITES_CMD:S/\\/\\\\/g:C/"/\"/g}` .else ORDERED_SITES= ${_MASTER_SITE_OVERRIDE} $$unsorted_sites .endif # # Associate each file to fetch with the correct site(s). # .if defined(DYNAMIC_MASTER_SITES) . for fetchfile in ${_ALLFILES} SITES_${fetchfile:T:S/=/--/}?= `${SH} ${FILESDIR}/getsite.sh ${fetchfile:T}` . endfor .endif .if !empty(_DISTFILES) . for fetchfile in ${_DISTFILES} SITES_${fetchfile:T:S/=/--/}?= ${MASTER_SITES} . endfor .endif .if !empty(_PATCHFILES) . for fetchfile in ${_PATCHFILES} SITES_${fetchfile:T:S/=/--/}?= ${PATCH_SITES} . endfor .endif # This code is only called in a batch case, to check for the presence of # the distfiles .PHONY: batch-check-distfiles batch-check-distfiles: ${_PKG_SILENT}${_PKG_DEBUG} \ gotfiles=yes; \ for file in "" ${_ALLFILES}; do \ case "$$file" in \ "") continue ;; \ *) if [ ! -f ${DISTDIR}/$$file ]; then \ gotfiles=no; \ fi ;; \ esac; \ done; \ case "$$gotfiles" in \ no) ${ECHO} "*** This package requires user intervention to download the distfiles"; \ ${ECHO} "*** Please fetch the distfiles manually and place them in"; \ ${ECHO} "*** ${DISTDIR}"; \ [ ! -z "${MASTER_SITES}" ] && \ ${ECHO} "*** The distfiles are available from ${MASTER_SITES}"; \ [ ! -z "${HOMEPAGE}" ] && \ ${ECHO} "*** See ${HOMEPAGE} for more details"; \ ${ECHO}; \ ${TOUCH} ${_INTERACTIVE_COOKIE}; \ ${FALSE} ;; \ esac # check for any vulnerabilities in the package # Please do not modify the leading "@" here .PHONY: check-vulnerable check-vulnerable: @if [ ! -z "${PKG_SYSCONFDIR.audit-packages}" -a -f ${PKG_SYSCONFDIR.audit-packages}/audit-packages.conf ]; then \ . ${PKG_SYSCONFDIR.audit-packages}/audit-packages.conf; \ elif [ ! -z "${PKG_SYSCONFDIR}" -a -f ${PKG_SYSCONFDIR}/audit-packages.conf ]; then \ . ${PKG_SYSCONFDIR}/audit-packages.conf; \ fi; \ if [ -f ${PKGVULNDIR}/pkg-vulnerabilities ]; then \ ${SETENV} PKGNAME=${PKGNAME:Q} \ PKGBASE=${PKGBASE:Q} \ ${AWK} '/^$$/ { next } \ /^#.*/ { next } \ $$1 !~ ENVIRON["PKGBASE"] && $$1 !~ /\{/ { next } \ { s = sprintf("${PKG_ADMIN} pmatch \"%s\" %s && ${ECHO} \"*** WARNING - %s vulnerability in %s - see %s for more information ***\"", $$1, ENVIRON["PKGNAME"], $$2, ENVIRON["PKGNAME"], $$3); system(s); }' < ${PKGVULNDIR}/pkg-vulnerabilities || ${FALSE}; \ fi .PHONY: do-fetch .if !target(do-fetch) do-fetch: . if !defined(ALLOW_VULNERABLE_PACKAGES) ${_PKG_SILENT}${_PKG_DEBUG} \ if [ -f ${PKGVULNDIR}/pkg-vulnerabilities ]; then \ ${ECHO_MSG} "${_PKGSRC_IN}> Checking for vulnerabilities in ${PKGNAME}"; \ vul=`${MAKE} ${MAKEFLAGS} check-vulnerable`; \ case "$$vul" in \ "") ;; \ *) ${ECHO} "$$vul"; \ ${ECHO} "or define ALLOW_VULNERABLE_PACKAGES if this package is absolutely essential"; \ ${FALSE} ;; \ esac; \ else \ ${ECHO_MSG} "${_PKGSRC_IN}> *** No ${PKGVULNDIR}/pkg-vulnerabilities file found,"; \ ${ECHO_MSG} "${_PKGSRC_IN}> *** skipping vulnerability checks. To fix, install"; \ ${ECHO_MSG} "${_PKGSRC_IN}> *** the pkgsrc/security/audit-packages package and run"; \ ${ECHO_MSG} "${_PKGSRC_IN}> *** '${LOCALBASE}/sbin/download-vulnerability-list'."; \ fi . endif . if !empty(_ALLFILES) ${_PKG_SILENT}${_PKG_DEBUG} \ ${TEST} -d ${_DISTDIR} || ${MKDIR} ${_DISTDIR} . if ${INTERACTIVE_STAGE:Mfetch} == "fetch" && defined(BATCH) ${_PKG_SILENT}${_PKG_DEBUG} \ ${MAKE} ${MAKEFLAGS} batch-check-distfiles . else . for fetchfile in ${_ALLFILES} . if defined(_FETCH_MESSAGE) ${_PKG_SILENT}${_PKG_DEBUG} \ file="${fetchfile}"; \ if [ ! -f ${DISTDIR}/$$file ]; then \ ${_FETCH_MESSAGE}; \ fi . else ${_PKG_SILENT}${_PKG_DEBUG} \ cd ${_DISTDIR}; \ file="${fetchfile}"; \ bfile="${fetchfile:T}"; \ unsorted_sites="${SITES_${fetchfile:T:S/=/--/}} ${_MASTER_SITE_BACKUP}"; \ sites="${ORDERED_SITES}"; \ ${_CHECK_DIST_PATH}; \ if ${TEST} "${PKG_RESUME_TRANSFERS:M[Yy][Ee][Ss]}" ; then \ ${_FETCH_FILE}; ${_RESUME_TRANSFER}; \ else \ ${_FETCH_FILE}; \ fi . endif # defined(_FETCH_MESSAGE) . endfor . endif # INTERACTIVE_STAGE == fetch . endif # !empty(_ALLFILES) .endif # show both build and run depends directories (non-recursively) .PHONY: show-depends-dirs .if !target(show-depends-dirs) _ALL_DEPENDS= ${DEPENDS} ${BUILD_DEPENDS} show-depends-dirs: @dlist=""; \ depends=${_ALL_DEPENDS:C/^[^:]*://:O:u:Q}; \ for reldir in $$depends; do \ case $$reldir in \ ../../*/*) ;; \ *) ${ECHO} "[show-depends-dirs] warning: invalid dependency \"$$reldir\". Check DEPENDS and BUILD_DEPENDS." 1>&2; \ continue;; \ esac; \ WD=`cd "$$reldir" && ${PWD_CMD}`; \ d=`dirname $$WD`; \ absdir=`basename $$d`/`basename $$WD`; \ dlist="$$dlist $$absdir"; \ done; \ ${ECHO} $$dlist .endif # Show all build and run depends, reverse-breadth first, with options. .if make(show-all-depends-dirs) || make(show-all-depends-dirs-excl) || make (show-root-dirs) # "awk" macro to recurse over the dependencies efficiently, never running in # the same same directory twice. You may set the following options via "-v": # # NonSelf = 1 to not print own directory; # RootsOnly = 1 to print only root directories (i.e. directories # of packages with no dependencies), including possibly # own directory # _RECURSE_DEPENDS_DIRS= \ function append_dirs(dir) { \ command = "cd ../../" dir " && ${MAKE} show-depends-dirs"; \ command | getline tmp_dirs; \ close(command); \ if (tmp_dirs ~ /^$$/) \ root_dirs[p++] = dir; \ for (i = 1; i <= split(tmp_dirs, tmp_r); i++) \ if (!(tmp_r[i] in hash_all_dirs)) { \ all_dirs[n++] = tmp_r[i]; \ hash_all_dirs[tmp_r[i]] = 1 \ } \ } \ BEGIN { \ command = "${PWD_CMD}"; \ command | getline start_dir; \ close(command); \ i = split(start_dir, tmp_r, /\//); \ all_dirs[n++] = tmp_r[i-1] "/" tmp_r[i]; \ for (; m < n; ) \ append_dirs(all_dirs[m++]); \ if (RootsOnly) { \ printf("%s", root_dirs[--p]); \ for (; p > 0; ) \ printf(" %s", root_dirs[--p]) \ } \ else { \ if (m > NonSelf) \ printf("%s", all_dirs[--m]); \ for (; m > NonSelf; ) \ printf(" %s", all_dirs[--m]) \ } \ print \ } .PHONY: show-all-depends-dirs .if make(show-all-depends-dirs) show-all-depends-dirs: @${AWK} '${_RECURSE_DEPENDS_DIRS}' .endif .PHONY: show-all-depends-dirs-excl .if make(show-all-depends-dirs-excl) show-all-depends-dirs-excl: @${AWK} -v NonSelf=1 '${_RECURSE_DEPENDS_DIRS}' .endif .PHONY: show-root-dirs .if make(show-root-dirs) show-root-dirs: ${_PKG_SILENT}${_PKG_DEBUG}${AWK} -v RootsOnly=1 '${_RECURSE_DEPENDS_DIRS}' .endif .endif # make(show-{all-depends-dirs{,-excl},root-dirs}) .PHONY: show-distfiles .if !target(show-distfiles) show-distfiles: . if defined(PKG_FAIL_REASON) ${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA} . else ${_PKG_SILENT}${_PKG_DEBUG} \ for file in "" ${_CKSUMFILES}; do \ if [ "X$$file" = "X" ]; then continue; fi; \ ${ECHO} $$file; \ done . endif .endif .PHONY: show-downlevel .if !target(show-downlevel) show-downlevel: . if defined(PKG_FAIL_REASON) ${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA} . else ${_PKG_SILENT}${_PKG_DEBUG} \ found="`${PKG_BEST_EXISTS} \"${PKGWILDCARD}\" || ${TRUE}`"; \ if [ "X$$found" != "X" -a "X$$found" != "X${PKGNAME}" ]; then \ ${ECHO} "${PKGBASE} package: $$found installed, pkgsrc version ${PKGNAME}"; \ if [ "X$$STOP_DOWNLEVEL_AFTER_FIRST" != "X" ]; then \ ${ECHO} "stopping after first downlevel pkg found"; \ exit 1; \ fi; \ fi . endif .endif .PHONY: show-installed-depends .if !target(show-installed-depends) show-installed-depends: . if !empty(DEPENDS) ${_PKG_SILENT}${_PKG_DEBUG} \ for i in ${DEPENDS:C/:.*$//:Q:S/\ / /g} ; do \ echo "$$i =>" `${PKG_BEST_EXISTS} "$$i"` ; \ done . endif .endif .PHONY: show-needs-update .if !target(show-needs-update) show-needs-update: . if !empty(DEPENDS) ${_PKG_SILENT}${_PKG_DEBUG} \ for i in `${MAKE} show-all-depends-dirs`; do \ cd ${PKGSRCDIR}/$$i; \ eval `${MAKE} show-vars-eval VARS='PKGNAME:want PKGWILDCARD:wild'`; \ have=`${PKG_BEST_EXISTS} "$$wild" || ${TRUE}`; \ if [ -z "$$have" ]; then \ ${ECHO} "$$i => (none) => needs install of $$want"; \ elif [ "$$have" != "$$want" ]; then \ ${ECHO} "$$i => $$have => needs update to $$want"; \ fi; \ done . endif .endif .PHONY: show-pkgsrc-dir .if !target(show-pkgsrc-dir) show-pkgsrc-dir: . if defined(PKG_FAIL_REASON) ${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA} . else ${_PKG_SILENT}${_PKG_DEBUG} \ found="`${PKG_BEST_EXISTS} \"${PKGWILDCARD}\" || ${TRUE}`"; \ if [ "X$$found" != "X" ]; then \ ${ECHO} ${PKGPATH}; \ fi . endif .endif # Extract # pkgsrc coarse-grained locking definitions and targets .if ${PKGSRC_LOCKTYPE} == "none" _ACQUIRE_LOCK= ${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA} _RELEASE_LOCK= ${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA} .else LOCKFILE= ${WRKDIR}/.lockfile _ACQUIRE_LOCK= \ ${_PKG_SILENT}${_PKG_DEBUG} \ SHLOCK=${SHLOCK:Q}; \ if ${TEST} ! -f "$$SHLOCK" || ${TEST} ! -x "$$SHLOCK"; then \ { ${ECHO} "The \"$$SHLOCK\" utility does not exist, and is necessary for locking."; \ ${ECHO} "Please \""${MAKE:Q}" install\" in ../../pkgtools/shlock."; \ } 1>&2; \ ${FALSE}; \ fi; \ if ${TEST} x${OBJHOSTNAME:Ddefined} != x"defined"; then \ ${ECHO} "PKGSRC_LOCKTYPE needs OBJHOSTNAME defined." 1>&2; \ ${FALSE}; \ fi; \ ppid=`${PS} -p $$$$ -o ppid | ${AWK} 'NR == 2 { print $$1 }'`; \ if ${TEST} "$$ppid" = ""; then \ ${ECHO} "No parent process ID found."; \ ${FALSE}; \ fi; \ while true; do \ : "Remove lock files older than the last reboot"; \ if ${TEST} -f /var/run/dmesg.boot -a -f ${LOCKFILE}; then \ rebooted=`${FIND} /var/run/dmesg.boot -newer ${LOCKFILE} -print`; \ if ${TEST} x"$$rebooted" != x; then \ ${ECHO} "=> Removing stale ${LOCKFILE}"; \ ${RM} ${LOCKFILE}; \ fi; \ fi; \ ${SHLOCK} -f ${LOCKFILE} -p $$ppid && break; \ ${ECHO} "=> Lock is held by pid `cat ${LOCKFILE}`"; \ case "${PKGSRC_LOCKTYPE}" in \ once) exit 1 ;; \ sleep) ${SLEEP} ${PKGSRC_SLEEPSECS} ;; \ esac \ done; \ if [ "${PKG_VERBOSE}" != "" ]; then \ ${ECHO_MSG} "=> Lock acquired on behalf of process $$ppid"; \ fi _RELEASE_LOCK= \ ${_PKG_SILENT}${_PKG_DEBUG} \ if [ "${PKG_VERBOSE}" != "" ]; then \ ${ECHO_MSG} "=> Lock released on behalf of process `${CAT} ${LOCKFILE}`"; \ fi; \ ${RM} ${LOCKFILE} .endif # PKGSRC_LOCKTYPE ${WRKDIR}: .if !defined(KEEP_WRKDIR) . if ${PKGSRC_LOCKTYPE} == "sleep" || ${PKGSRC_LOCKTYPE} == "once" . if !exists(${LOCKFILE}) ${_PKG_SILENT}${_PKG_DEBUG}${RM} -rf ${WRKDIR} . endif . endif .endif ${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${WRKDIR} ${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${PKG_DB_TMPDIR} .if defined(WRKOBJDIR) . if ${PKGSRC_LOCKTYPE} == "sleep" || ${PKGSRC_LOCKTYPE} == "once" . if !exists(${LOCKFILE}) ${_PKG_SILENT}${_PKG_DEBUG} \ ${RM} -f ${WRKDIR_BASENAME} || ${TRUE} . endif . endif . if !empty(CREATE_WRKDIR_SYMLINK:M[Yy][Ee][Ss]) ${_PKG_SILENT}${_PKG_DEBUG} \ if ${LN} -s ${WRKDIR} ${WRKDIR_BASENAME} 2>/dev/null; then \ ${ECHO} "${WRKDIR_BASENAME} -> ${WRKDIR}"; \ fi . endif .endif # WRKOBJDIR # Configure # _CONFIGURE_PREREQ is a list of targets to run after pre-configure but before # do-configure. These targets typically edit the files used by the # do-configure target. The targets are run as dependencies of # pre-configure-override. # # _CONFIGURE_POSTREQ is a list of targets to run after do-configure but before # post-configure. These targets typically edit the files generated by # the do-configure target that are used during the build phase. .if defined(USE_PKGLOCALEDIR) _PKGLOCALEDIR= ${PREFIX}/${PKGLOCALEDIR}/locale REPLACE_LOCALEDIR_PATTERNS?= # empty _REPLACE_LOCALEDIR_PATTERNS= ${REPLACE_LOCALEDIR_PATTERNS} . if defined(HAS_CONFIGURE) || defined(GNU_CONFIGURE) _REPLACE_LOCALEDIR_PATTERNS+= [Mm]akefile.in* . else _REPLACE_LOCALEDIR_PATTERNS+= [Mm]akefile* . endif _REPLACE_LOCALEDIR_PATTERNS_FIND_cmd= \ cd ${WRKSRC} && \ ${ECHO} "__dummy-entry__" && \ ${FIND} . \( ${_REPLACE_LOCALEDIR_PATTERNS:C/.*/-o -name "&"/g:S/-o//1} \) -print \ | ${SED} -e 's|^\./||' \ | ${SORT} -u REPLACE_LOCALEDIR?= # empty _REPLACE_LOCALEDIR= \ ${REPLACE_LOCALEDIR} \ ${_REPLACE_LOCALEDIR_PATTERNS_FIND_cmd:sh:N__dummy-entry__:N*.orig} _CONFIGURE_PREREQ+= subst-pkglocaledir . if empty(USE_PKGLOCALEDIR:M[nN][oO]) SUBST_CLASSES+= pkglocaledir . endif SUBST_MESSAGE.pkglocaledir= "Fixing locale directory references." SUBST_FILES.pkglocaledir= ${_REPLACE_LOCALEDIR} SUBST_SED.pkglocaledir= \ -e 's|^\(localedir[ :]*=\).*|\1 ${_PKGLOCALEDIR}|' \ -e 's|^\(gnulocaledir[ :]*=\).*|\1 ${_PKGLOCALEDIR}|' \ -e 's|\(-DLOCALEDIR[ ]*=\)[^ ]*\(\.\*\)|\1"\\"${_PKGLOCALEDIR}\\""\2|' .endif .if defined(REPLACE_PERL) REPLACE_INTERPRETER+= perl _REPLACE.perl.old= .*/bin/perl _REPLACE.perl.new= ${PERL5} _REPLACE_FILES.perl= ${REPLACE_PERL} .endif .if defined(REPLACE_INTERPRETER) _CONFIGURE_PREREQ+= replace-interpreter .PHONY: replace-interpreter replace-interpreter: . for lang in ${REPLACE_INTERPRETER} . for pattern in ${_REPLACE_FILES.${lang}} ${_PKG_SILENT}${_PKG_DEBUG} \ cd ${WRKSRC}; \ for f in ${pattern}; do \ if [ -f $${f} ]; then \ ${SED} -e '1s|^#!${_REPLACE.${lang}.old}|#!${_REPLACE.${lang}.new}|' \ $${f} > $${f}.new; \ if [ -x $${f} ]; then \ ${CHMOD} a+x $${f}.new; \ fi; \ ${MV} -f $${f}.new $${f}; \ fi; \ done . endfor . endfor .endif .if defined(USE_LIBTOOL) && defined(LTCONFIG_OVERRIDE) _CONFIGURE_PREREQ+= do-ltconfig-override .PHONY: do-ltconfig-override do-ltconfig-override: . for ltconfig in ${LTCONFIG_OVERRIDE} ${_PKG_SILENT}${_PKG_DEBUG} \ if [ -f ${ltconfig} ]; then \ ${RM} -f ${ltconfig}; \ ${ECHO} "${RM} -f libtool; ${LN} -s ${_LIBTOOL} libtool" \ > ${ltconfig}; \ ${CHMOD} +x ${ltconfig}; \ fi . endfor .endif _CONFIGURE_PREREQ+= do-config-star-override .PHONY: do-config-star-override do-config-star-override: .if defined(GNU_CONFIGURE) . if !empty(CONFIG_GUESS_OVERRIDE) . for _pattern_ in ${CONFIG_GUESS_OVERRIDE} ${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC}; \ for file in ${_pattern_}; do \ if [ -f "$$file" ]; then \ ${RM} -f $$file; \ ${LN} -s ${PKGSRCDIR}/mk/gnu-config/config.guess \ $$file; \ fi; \ done . endfor . endif . if !empty(CONFIG_SUB_OVERRIDE) . for _pattern_ in ${CONFIG_SUB_OVERRIDE} ${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC}; \ for file in ${_pattern_}; do \ if [ -f "$$file" ]; then \ ${RM} -f $$file; \ ${LN} -s ${PKGSRCDIR}/mk/gnu-config/config.sub \ $$file; \ fi; \ done . endfor . endif . if !empty(CONFIG_RPATH_OVERRIDE) . for _pattern_ in ${CONFIG_RPATH_OVERRIDE} ${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC}; \ for file in ${_pattern_}; do \ if [ -f "$$file" ]; then \ ${RM} -f $$file; \ ${LN} -s ${PKGSRCDIR}/mk/gnu-config/config.rpath \ $$file; \ fi; \ done . endfor . endif .endif PKGCONFIG_OVERRIDE_SED= \ '/^Libs:.*[ ]/s|-L\([ ]*[^ ]*\)|${COMPILER_RPATH_FLAG}\1 -L\1|g' PKGCONFIG_OVERRIDE_STAGE?= pre-configure .if defined(PKGCONFIG_OVERRIDE) && !empty(PKGCONFIG_OVERRIDE) . if ${PKGCONFIG_OVERRIDE_STAGE} == "pre-configure" _CONFIGURE_PREREQ+= subst-pkgconfig . elif ${PKGCONFIG_OVERRIDE_STAGE} == "post-configure" _CONFIGURE_POSTREQ+= subst-pkgconfig . else SUBST_STAGE.pkgconfig= ${PKGCONFIG_OVERRIDE_STAGE} . endif SUBST_CLASSES+= pkgconfig SUBST_MESSAGE.pkgconfig= "Adding rpaths to pkgconfig files." SUBST_FILES.pkgconfig= ${PKGCONFIG_OVERRIDE:S/^${WRKSRC}\///} SUBST_SED.pkgconfig= ${PKGCONFIG_OVERRIDE_SED} .endif # By adding this target, it makes sure the above PREREQ's work. .PHONY: pre-configure-override pre-configure-override: ${_CONFIGURE_PREREQ} @${DO_NADA} .PHONY: do-configure .if !target(do-configure) do-configure: . if defined(HAS_CONFIGURE) . for _dir_ in ${CONFIGURE_DIRS} ${_PKG_SILENT}${_PKG_DEBUG}${_ULIMIT_CMD} \ cd ${WRKSRC}; cd ${_dir_}; \ ${SETENV} \ AWK="${TOOLS_AWK}" \ INSTALL="${INSTALL} -c -o ${BINOWN} -g ${BINGRP}" \ ac_given_INSTALL="${INSTALL} -c -o ${BINOWN} -g ${BINGRP}" \ INSTALL_DATA="${INSTALL_DATA}" \ INSTALL_PROGRAM="${INSTALL_PROGRAM}" \ INSTALL_GAME="${INSTALL_GAME}" \ INSTALL_GAME_DATA="${INSTALL_GAME_DATA}" \ INSTALL_SCRIPT="${INSTALL_SCRIPT}" \ ${CONFIGURE_ENV} ${CONFIG_SHELL} \ ${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS} . endfor . endif . if defined(USE_IMAKE) . for _dir_ in ${CONFIGURE_DIRS} ${_PKG_SILENT}${_PKG_DEBUG} \ cd ${WRKSRC}; cd ${_dir_}; \ ${SETENV} ${SCRIPTS_ENV} XPROJECTROOT=${X11BASE} ${XMKMF} . endfor . endif .endif .if defined(USE_LIBTOOL) && \ (defined(LIBTOOL_OVERRIDE) || defined(SHLIBTOOL_OVERRIDE)) _CONFIGURE_POSTREQ+= do-libtool-override .PHONY: do-libtool-override do-libtool-override: . if defined(LIBTOOL_OVERRIDE) . for _pattern_ in ${LIBTOOL_OVERRIDE} ${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC}; \ for file in ${_pattern_}; do \ if [ -f "$$file" ]; then \ ${RM} -f $$file; \ (${ECHO} '#!${CONFIG_SHELL}'; \ ${ECHO} 'exec ${_LIBTOOL} "$$@"'; \ ) > $$file; \ ${CHMOD} +x $$file; \ fi; \ done . endfor . endif . if defined(SHLIBTOOL_OVERRIDE) . for _pattern_ in ${SHLIBTOOL_OVERRIDE} ${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC}; \ for file in ${_pattern_}; do \ if [ -f "$$file" ]; then \ ${RM} -f $$file; \ (${ECHO} '#!${CONFIG_SHELL}'; \ ${ECHO} 'exec ${_SHLIBTOOL} "$$@"'; \ ) > $$file; \ ${CHMOD} +x $$file; \ fi; \ done . endfor . endif .endif .if defined(CONFIG_STATUS_OVERRIDE) _CONFIGURE_POSTREQ+= do-config-status-override .PHONY: do-config-status-override do-config-status-override: . for _pattern_ in ${CONFIG_STATUS_OVERRIDE} ${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC}; \ for file in ${_pattern_}; do \ if [ -f "$$file" ]; then \ ${MV} -f $$file $$file.overridden; \ ${AWK} '/ *-recheck *\| *--recheck.*\)/ { \ print; \ print " exit 0"; \ next; \ } \ { print } \ ' $$file.overridden > $$file; \ ${CHMOD} +x $$file; \ fi; \ done . endfor .endif .PHONY: post-configure post-configure: ${_CONFIGURE_POSTREQ} # Build BUILD_DIRS?= ${CONFIGURE_DIRS} BUILD_MAKE_FLAGS?= ${MAKE_FLAGS} .PHONY: do-build .if !target(do-build) do-build: . for _dir_ in ${BUILD_DIRS} ${_PKG_SILENT}${_PKG_DEBUG}${_ULIMIT_CMD} \ cd ${WRKSRC}; cd ${_dir_}; \ ${SETENV} ${MAKE_ENV} ${MAKE_PROGRAM} ${BUILD_MAKE_FLAGS} \ -f ${MAKEFILE} ${BUILD_TARGET} . endfor .endif #Test TEST_DIRS?= ${BUILD_DIRS} TEST_ENV+= ${MAKE_ENV} TEST_MAKE_FLAGS?= ${MAKE_FLAGS} .PHONY: do-test .if !target(do-test) do-test: . if defined(TEST_TARGET) && !empty(TEST_TARGET) . for _dir_ in ${TEST_DIRS} ${_PKG_SILENT}${_PKG_DEBUG}${_ULIMIT_CMD} \ cd ${WRKSRC}; cd ${_dir_}; \ ${SETENV} ${TEST_ENV} ${MAKE_PROGRAM} ${TEST_MAKE_FLAGS} \ -f ${MAKEFILE} ${TEST_TARGET} . endfor . else @${DO_NADA} . endif .endif # Install .PHONY: do-install .if !target(do-install) do-install: . for _dir_ in ${INSTALL_DIRS} ${_PKG_SILENT}${_PKG_DEBUG}${_ULIMIT_CMD} \ cd ${WRKSRC}; cd ${_dir_}; \ ${SETENV} ${MAKE_ENV} ${MAKE_PROGRAM} ${INSTALL_MAKE_FLAGS} \ -f ${MAKEFILE} ${INSTALL_TARGET} . endfor .endif # Package .PHONY: real-su-package .if !target(real-su-package) real-su-package: ${PLIST} ${DESCR} ${_PKG_SILENT}${_PKG_DEBUG} \ ${ECHO_MSG} "${_PKGSRC_IN}> Building binary package for ${PKGNAME}"; \ if ${PKG_INFO} -qe ${PKGNAME}; then \ : The package is installed. ; \ else \ ${ECHO_MSG} "=> ${PKGNAME} is not installed."; \ exit 1; \ fi; \ if [ ! -d ${PKGREPOSITORY} ]; then \ ${MKDIR} ${PKGREPOSITORY}; \ if [ $$? -ne 0 ]; then \ ${ECHO_MSG} "=> Can't create directory ${PKGREPOSITORY}."; \ exit 1; \ fi; \ fi; \ if ${PKG_CREATE} ${PKG_ARGS_BINPKG} ${PKGFILE}; then \ ${MAKE} ${MAKEFLAGS} package-links; \ else \ ${ECHO} "(pkg_create: exitcode $$?)"; \ ${MAKE} ${MAKEFLAGS} delete-package; \ exit 1; \ fi ${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${_PACKAGE_COOKIE} . if defined(NO_BIN_ON_CDROM) @${ECHO_MSG} "${_PKGSRC_IN}> Warning: ${PKGNAME} may not be put on a CD-ROM:" @${ECHO_MSG} "${_PKGSRC_IN}> " ${NO_BIN_ON_CDROM:Q} . endif . if defined(NO_BIN_ON_FTP) @${ECHO_MSG} "${_PKGSRC_IN}> Warning: ${PKGNAME} may not be made available through FTP:" @${ECHO_MSG} "${_PKGSRC_IN}> " ${NO_BIN_ON_FTP:Q} . endif . if defined(RECOMMENDED) && !empty(IGNORE_RECOMMENDED:M[yY][eE][sS]) @${ECHO_MSG} "${_PKGSRC_IN}> Warning: dependency recommendations are being ignored!" @${ECHO_MSG} "${_PKGSRC_IN}> ${PKGNAME} should not be uploaded nor" @${ECHO_MSG} "${_PKGSRC_IN}> otherwise be used as a binary package!" . endif .endif # Some support rules for real-su-package .PHONY: package-links .if !target(package-links) package-links: ${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} delete-package-links ${_PKG_SILENT}${_PKG_DEBUG}for cat in ${CATEGORIES}; do \ if [ ! -d ${PACKAGES}/$$cat ]; then \ ${MKDIR} ${PACKAGES}/$$cat; \ if [ $$? -ne 0 ]; then \ ${ECHO_MSG} "=> Can't create directory ${PACKAGES}/$$cat."; \ exit 1; \ fi; \ fi; \ ${RM} -f ${PACKAGES}/$$cat/${PKGNAME}${PKG_SUFX}; \ ${LN} -s ../${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PACKAGES}/$$cat; \ done; .endif .PHONY: delete-package-links .if !target(delete-package-links) delete-package-links: ${_PKG_SILENT}${_PKG_DEBUG}\ ${FIND} ${PACKAGES} -type l -name ${PKGNAME}${PKG_SUFX} -print | ${XARGS} ${RM} -f .endif .PHONY: delete-package .if !target(delete-package) delete-package: ${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} delete-package-links ${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${PKGFILE} .endif .PHONY: real-su-install real-su-install: ${MESSAGE} .if !defined(NO_PKG_REGISTER) && !defined(FORCE_PKG_REGISTER) && \ (${PKG_INSTALLATION_TYPE} == "overwrite") . if defined(CONFLICTS) ${_PKG_SILENT}${_PKG_DEBUG} \ ${RM} -f ${WRKDIR}/.CONFLICTS . for conflict in ${CONFLICTS} ${_PKG_SILENT}${_PKG_DEBUG} \ found="`${PKG_BEST_EXISTS} \"${conflict}\" || ${TRUE}`"; \ if [ X"$$found" != X"" ]; then \ ${ECHO} "$$found" >> ${WRKDIR}/.CONFLICTS; \ fi . endfor ${_PKG_SILENT}${_PKG_DEBUG} \ if [ -s ${WRKDIR}/.CONFLICTS ]; then \ found=`${SED} -e s'|${_PKG_DBDIR}/||g' ${WRKDIR}/.CONFLICTS | tr '\012' ' '`; \ ${ECHO_MSG} "${_PKGSRC_IN}> ${PKGNAME} conflicts with installed package(s): $$found found."; \ ${ECHO_MSG} "*** They install the same files into the same place."; \ ${ECHO_MSG} "*** Please remove $$found first with pkg_delete(1)."; \ ${RM} -f ${WRKDIR}/.CONFLICTS; \ exit 1; \ fi . endif # CONFLICTS ${_PKG_SILENT}${_PKG_DEBUG} \ found="`${PKG_BEST_EXISTS} \"${PKGWILDCARD}\" || ${TRUE}`"; \ if [ "$$found" != "" ]; then \ ${ECHO_MSG} "${_PKGSRC_IN}> $$found is already installed - perhaps an older version?"; \ ${ECHO_MSG} "*** If so, you may use either of:"; \ ${ECHO_MSG} "*** - \"pkg_delete $$found\" and \"${MAKE} reinstall\" to upgrade properly"; \ ${ECHO_MSG} "*** - \"${MAKE} update\" to rebuild the package and all of its dependencies"; \ ${ECHO_MSG} "*** - \"${MAKE} replace\" to replace only the package without re-linking"; \ ${ECHO_MSG} "*** dependencies, risking various problems."; \ exit 1; \ fi .endif # !NO_PKG_REGISTER && !NO_FORCE_REGISTER && overwrite .if ${PKG_INSTALLATION_TYPE} == "pkgviews" ${_PKG_SILENT}${_PKG_DEBUG} \ found="`${PKG_INFO} -e ${PKGNAME} || ${TRUE}`"; \ if [ "$$found" != "" ]; then \ ${ECHO_MSG} "${_PKGSRC_IN}> $$found is already installed."; \ exit 1; \ fi .endif ${_PKG_SILENT}${_PKG_DEBUG}if [ `${SH} -c umask` -ne ${DEF_UMASK} ]; then \ ${ECHO_MSG} "${_PKGSRC_IN}> Warning: your umask is \"`${SH} -c umask`"\".; \ ${ECHO_MSG} "If this is not desired, set it to an appropriate value (${DEF_UMASK})"; \ ${ECHO_MSG} "and install this package again by \`\`${MAKE} deinstall reinstall''."; \ fi .if empty(CHECK_FILES:M[nN][oO]) ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} check-files-pre .endif .if defined(INSTALLATION_DIRS) && !empty(INSTALLATION_DIRS) ${_PKG_SILENT}${_PKG_DEBUG}${ECHO_MSG} "${_PKGSRC_IN}> Creating installation directories" ${_PKG_SILENT}${_PKG_DEBUG} \ for dir in ${INSTALLATION_DIRS}; do \ case $$dir in \ /*) ;; \ *bin|*bin/*|*libexec|*libexec/*) \ ${INSTALL_PROGRAM_DIR} ${PREFIX}/$$dir ;; \ ${PKGMANDIR}/*) \ ${INSTALL_MAN_DIR} ${PREFIX}/$$dir ;; \ *) \ ${INSTALL_DATA_DIR} ${PREFIX}/$$dir ;; \ esac; \ done .endif # INSTALLATION_DIRS .if !defined(NO_MTREE) ${_PKG_SILENT}${_PKG_DEBUG}if [ `${ID} -u` = `${ID} -u ${ROOT_USER}` ]; then \ if [ ! -f ${MTREE_FILE} ]; then \ ${ECHO_MSG} "Error: mtree file \"${MTREE_FILE}\" is missing."; \ exit 1; \ else \ if [ ! -d ${PREFIX} ]; then \ ${MKDIR} ${PREFIX}; \ fi; \ ${MTREE} ${MTREE_ARGS} ${PREFIX}/; \ fi; \ else \ ${ECHO_MSG} "Warning: not superuser, can't run mtree."; \ ${ECHO_MSG} "Become ${ROOT_USER} and try again to ensure correct permissions."; \ fi .else ${_PKG_SILENT}${_PKG_DEBUG}[ -d ${PREFIX} ] || ${MKDIR} ${PREFIX} .endif # !NO_MTREE .if !defined(NO_PKG_REGISTER) ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} pre-install-fake-pkg .endif # !NO_PKG_REGISTER ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} pre-install-script ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} pre-install ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} do-install ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} post-install ${_PKG_SILENT}${DO_NADA} \ # \ # PLIST must be generated at this late point (instead of \ # depending on it somewhere earlier), because it needs \ # to be created _after_ the {pre,do,post}-install \ # targets are run. \ # \ # We generate _before_ post-install-script is run so \ # that the real config files and rc.d scripts aren't \ # listed in the PLIST. \ # ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} ${PLIST} ${_PKG_SILENT}${_PKG_DEBUG}newmanpages=`${EGREP} -h \ '^([^@/]*/)*man/([^/]*/)?(man[1-9ln]/.*\.[1-9ln]|cat[1-9ln]/.*\.[0-9])(\.gz)?$$' \ ${PLIST} 2>/dev/null || ${TRUE}`; \ if [ "${_MANCOMPRESSED}" = "yes" -a "${_MANZ}" != "yes" ]; then \ ${ECHO_MSG} "${_PKGSRC_IN}> [Automatic manual page handling]"; \ ${ECHO_MSG} "${_PKGSRC_IN}> Decompressing manual pages for ${PKGNAME}"; \ for manpage in $$newmanpages; do \ manpage=`${ECHO} $$manpage | ${SED} -e 's|^man/|${PKGMANDIR}/|' -e 's|\.gz$$||'`; \ if [ -h ${PREFIX}/$$manpage.gz ]; then \ set - `${LS} -l ${PREFIX}/$$manpage.gz | ${SED} -e 's|\.gz$$||'`; \ shift `expr $$# - 1`; \ ${RM} -f ${PREFIX}/$$manpage; \ ${LN} -s $${1} ${PREFIX}/$$manpage; \ ${RM} ${PREFIX}/$$manpage.gz; \ else \ ${GUNZIP_CMD} ${PREFIX}/$$manpage.gz; \ fi; \ if [ X"${PKG_VERBOSE}" != X"" ]; then \ ${ECHO_MSG} "$$manpage"; \ fi; \ done; \ fi; \ if [ "${_MANCOMPRESSED}" != "yes" -a "${_MANZ}" = "yes" ]; then \ ${ECHO_MSG} "${_PKGSRC_IN}> [Automatic manual page handling]"; \ ${ECHO_MSG} "${_PKGSRC_IN}> Compressing manual pages for ${PKGNAME}"; \ for manpage in $$newmanpages; do \ manpage=`${ECHO} $$manpage | ${SED} -e 's|\.gz$$||'`; \ if [ -h ${PREFIX}/$$manpage ]; then \ set - `${LS} -l ${PREFIX}/$$manpage`; \ shift `expr $$# - 1`; \ ${RM} -f ${PREFIX}/$$manpage.gz; \ ${LN} -s $${1}.gz ${PREFIX}/$$manpage.gz; \ ${RM} ${PREFIX}/$$manpage; \ else \ ${GZIP_CMD} ${PREFIX}/$$manpage; \ fi; \ if [ X"${PKG_VERBOSE}" != X"" ]; then \ ${ECHO_MSG} "$$manpage"; \ fi; \ done; \ fi .if empty(CHECK_FILES:M[nN][oO]) ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} check-files-post .endif ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} post-install-script .if ${_DO_SHLIB_CHECKS} == "yes" . if ${PKG_INSTALLATION_TYPE} == "overwrite" ${_PKG_SILENT}${_PKG_DEBUG} \ ${MAKE} ${MAKEFLAGS} do-shlib-handling SHLIB_PLIST_MODE=0 . endif .endif .if defined(MESSAGE) @${ECHO_MSG} "${_PKGSRC_IN}> Please note the following:" @${ECHO_MSG} "" @${CAT} ${MESSAGE} @${ECHO_MSG} "" . if !empty(PKGSRC_MESSAGE_RECIPIENTS) ${_PKG_SILENT}${_PKG_DEBUG} \ (${ECHO} "The ${PKGNAME} package was installed on `${HOSTNAME_CMD}` at `date`"; \ ${ECHO} ""; \ ${ECHO} "Please note the following:"; \ ${ECHO} ""; \ ${CAT} ${MESSAGE}; \ ${ECHO} "") | \ ${MAIL_CMD} -s"Package ${PKGNAME} installed on `${HOSTNAME_CMD}`" ${PKGSRC_MESSAGE_RECIPIENTS} . endif .endif .if !defined(NO_PKG_REGISTER) ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} register-pkg .endif # !NO_PKG_REGISTER ${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${_INSTALL_COOKIE} .if defined(PKG_DEVELOPER) && (${CHECK_SHLIBS} == "YES") ${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} check-shlibs .endif .if empty(CHECK_WRKREF:M[nN][oO]) ${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} check-wrkref .endif .if empty(CHECK_FILES:M[nN][oO]) ${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} check-files .endif # Do handling of shared libs for two cases: # # SHLIB_PLIST_MODE=1: when first called via the ${PLIST} target, # update the PLIST to contain ELF symlink, run # ldconfig on a.out, etc. (used when called via # the ${PLIST} target). Will update ${PLIST}. # SHLIB_PLIST_MODE=0: when called via the real-su-install target, # actually generate symlinks for ELF, run ldconfig # for a.out, etc. Will not modify ${PLIST}. # # XXX This target could need some cleanup after it was ripped out of # real-su-install # _AOUT_AWK = \ BEGIN { linkc = 1 } \ /^@/ { lines[NR] = $$0; next } \ function libtool_release(lib) { \ if (gsub("-[^-]+\\.so\\.", ".so.", lib)) { \ if (system("${TEST} -h ${PREFIX}/" lib) == 0) { \ rels[NR] = lib; \ } \ } \ } \ /.*\/lib[^\/]+\.so\.[0-9]+\.[0-9]+\.[0-9]+$$/ { \ libtool_release($$0); \ lines[NR] = $$0; \ sub("\\.[0-9]+$$", ""); \ links[linkc++] = $$0; \ sub("\\.[0-9]+$$", ""); \ links[linkc++] = $$0; \ sub("\\.[0-9]+$$", ""); \ links[linkc++] = $$0; \ if (sub("-[^-]+\\.so$$", ".so")) { \ links[linkc++] = $$0; \ } \ next \ } \ /.*\/lib[^\/]+\.so\.[0-9]+\.[0-9]+$$/ { \ libtool_release($$0); \ lines[NR] = $$0; \ sub("\\.[0-9]+$$", ""); \ links[linkc++] = $$0; \ sub("\\.[0-9]+$$", ""); \ links[linkc++] = $$0; \ if (sub("-[^-]+\\.so$$", ".so")) { \ links[linkc++] = $$0; \ } \ next \ } \ { lines[NR] = $$0 } \ END { \ for (i = 0 ; i <= linkc ; i++) \ for (j = 1 ; j < NR ; j++) \ if (lines[j] == links[i]) \ lines[j] = "@comment " lines[j]; \ if (${SHLIB_PLIST_MODE}) \ for (i = 1 ; i <= NR ; i++) { \ print lines[i]; \ if (rels[i] != "") \ print rels[i]; \ } \ } _DYLIB_AWK= \ /^@/ { lines[NR] = $$0; next } \ function libtool_release(lib) { \ if (gsub("\\.so\\.", ".", lib) || gsub("\\.so$$", "", lib)) { \ lib = lib ".dylib"; \ if (system("${TEST} -h ${PREFIX}/" lib) == 0) { \ rels[NR] = lib; \ } \ } \ } \ /.*\/lib[^\/]+\.so\.[0-9]+\.[0-9]+\.[0-9]+$$/ { \ libtool_release($$0); \ lines[NR] = $$0; \ links[linkc++] = $$0; \ sub("\\.[0-9]+$$", ""); \ links[linkc++] = $$0; \ sub("\\.[0-9]+$$", ""); \ links[linkc++] = $$0; \ sub("\\.[0-9]+$$", ""); \ links[linkc++] = $$0; \ if (sub("-[^-]+\\.so$$", ".so")) { \ links[linkc++] = $$0; \ } \ next \ } \ /.*\/lib[^\/]+\.so\.[0-9]+\.[0-9]+$$/ { \ libtool_release($$0); \ lines[NR] = $$0; \ links[linkc++] = $$0; \ sub("\\.[0-9]+$$", ""); \ links[linkc++] = $$0; \ sub("\\.[0-9]+$$", ""); \ links[linkc++] = $$0; \ if (sub("-[^-]+\\.so$$", ".so")) { \ links[linkc++] = $$0; \ } \ next \ } \ /.*\/lib[^\/]+\.so\.[0-9]+$$/ { \ libtool_release($$0); \ lines[NR] = $$0; \ links[linkc++] = $$0; \ sub("\\.[0-9]+$$", ""); \ links[linkc++] = $$0; \ if (sub("-[^-]+\\.so$$", ".so")) { \ links[linkc++] = $$0; \ } \ next \ } \ /.*\/lib[^\/]+\.so$$/ { \ lines[NR] = $$0; \ if (system("${TEST} -f ${PREFIX}/" $$0) == 0) { \ next; \ } \ libtool_release($$0); \ links[linkc++] = $$0; \ if (sub("-[^-]+\\.so$$", ".so")) { \ links[linkc++] = $$0; \ } \ next \ } \ { lines[NR] = $$0 } \ END { \ for (i = 0 ; i <= linkc ; i++) \ for (j = 1 ; j <= NR ; j++) \ if (lines[j] == links[i]) \ lines[j] = "@comment " lines[j]; \ if (${SHLIB_PLIST_MODE}) \ for (i = 1 ; i <= NR ; i++) { \ print lines[i]; \ if (rels[i] != "") { \ print rels[i]; \ cmd = "${LS} -l ${PREFIX}/" rels[i]; \ cmd | getline tgt; \ close(cmd); \ gsub(".* ", "", tgt); \ if (tgts[tgt] == "") { \ tgts[tgt] = tgt; \ if (index(tgt, "/") == 1) \ print tgt; \ else { \ prefix=""; \ if (match(rels[i], ".*/") != 0) \ prefix=substr(rels[i],1,RLENGTH); \ print prefix tgt; \ } \ } \ } \ } \ } # Turn lib*.so.*, lib*.so into lib*.so. Drop duplicates. _AIXLIB_AWK= \ /^@/ { lines[NR] = $$0; next } \ /.*\/lib[^\/]+\.so(\.[0-9]+)*$$/ { \ sub("(\\.[0-9]+)*$$", ""); \ sub("\\.so$$", ".so"); \ lines[NR] = $$0; \ next \ } \ { lines[NR] = $$0 } \ END { \ nlibs = 0; \ for (i = 1; i <= NR; i++) { \ for (j = 0; j < nlibs; j++) { \ if (libs[j] == lines[i]) \ break; \ } \ if (j >= nlibs) \ print lines[i]; \ if (match(lines[i], ".*/lib[^/]+\\.a$$")) { \ libs[nlibs] = lines[i]; \ nlibs++; \ } \ } \ } .PHONY: do-shlib-handling do-shlib-handling: .if ${SHLIB_HANDLING} == "YES" ${_PKG_SILENT}${_PKG_DEBUG} \ sos=`${EGREP} -h '^.*/lib[^/]+\.so$$' ${PLIST} || ${TRUE}`; \ if [ "$$sos" != "" ]; then \ shlib_type=`${MAKE} ${MAKEFLAGS} show-shlib-type`; \ if [ "${SHLIB_PLIST_MODE}" = "0" ]; then \ ${ECHO_MSG} "${_PKGSRC_IN}> [Automatic $$shlib_type shared object handling]"; \ fi; \ case "$$shlib_type" in \ ELF) ;; \ aixlib) ;; \ "a.out") \ ${AWK} '${_AOUT_AWK}' <${PLIST} >${PLIST}.tmp ; \ if [ "${SHLIB_PLIST_MODE}" = "1" ]; then \ ${MV} ${PLIST}.tmp ${PLIST}; \ else \ ${RM} ${PLIST}.tmp ; \ fi ; \ cnt=`${EGREP} -c '^@exec[ ]*${LDCONFIG}$$' ${PLIST} || ${TRUE}`; \ if [ "${SHLIB_PLIST_MODE}" = "1" ]; then \ if [ $$cnt -eq 0 ]; then \ ${ECHO} "@exec ${LDCONFIG}" >> ${PLIST}; \ ${ECHO} "@unexec ${LDCONFIG}" >> ${PLIST}; \ fi \ fi; \ if [ "${SHLIB_PLIST_MODE}" = "0" ]; then \ if [ "${PKG_VERBOSE}" != "" ]; then \ ${ECHO_MSG} "$$sos"; \ ${ECHO_MSG} "Running ${LDCONFIG}"; \ fi; \ ${LDCONFIG} || ${TRUE}; \ fi \ ;; \ "dylib") \ ${AWK} '${_DYLIB_AWK}' <${PLIST} >${PLIST}.tmp && \ if [ "${SHLIB_PLIST_MODE}" = "1" ]; then \ ${MV} ${PLIST}.tmp ${PLIST}; \ else \ ${RM} ${PLIST}.tmp ; \ fi ; \ ;; \ "*") \ if [ "${SHLIB_PLIST_MODE}" = "0" ]; then \ ${ECHO_MSG} "No shared libraries for ${MACHINE_ARCH}"; \ fi ; \ if [ "${SHLIB_PLIST_MODE}" = "1" ]; then \ for so in $$sos; do \ if [ X"${PKG_VERBOSE}" != X"" ]; then \ ${ECHO_MSG} >&2 "Ignoring $$so"; \ fi; \ ${SED} -e "s;^$$so$$;@comment No shared objects - &;" \ ${PLIST} >${PLIST}.tmp && ${MV} ${PLIST}.tmp ${PLIST}; \ done; \ fi ; \ ;; \ esac; \ fi .endif # SHLIB_HANDLING == "YES" # Check if all binaries and shlibs find their needed libs # Must be run after "make install", so that files are installed, and # ${PLIST} exists. # .PHONY: check-shlibs check-shlibs: .if !defined(NO_PKG_REGISTER) ${_PKG_SILENT}${_PKG_DEBUG} \ bins=`${PKG_INFO} -qL ${PKGNAME} | { ${EGREP} -h '/(bin|sbin|libexec)/' || ${TRUE}; }`; \ if [ "${OBJECT_FMT}" = "ELF" ]; then \ shlibs=`${PKG_INFO} -qL ${PKGNAME} | { ${EGREP} -h '/lib/lib.*.so' || ${TRUE}; }`; \ elif [ "${OBJECT_FMT}" = "Mach-O" ]; then \ shlibs=`${PKG_INFO} -qL ${PKGNAME} | { ${EGREP} -h '/lib/lib.*.dylib' || ${TRUE}; }`; \ else \ shlibs=""; \ fi; \ if [ "X${LDD}" = X ]; then \ ldd=`${TYPE} ldd 2>/dev/null | ${AWK} '{ print $$NF }'`;\ else \ ldd="${LDD}"; \ fi; \ if [ -x "$$ldd" ]; then \ for i in $${bins} $${shlibs}; do \ err=`{ $$ldd $$i 2>&1 || ${TRUE}; } | { ${GREP} "not found" || ${TRUE}; }`; \ if [ "${PKG_VERBOSE}" != "" ]; then \ ${ECHO} "$$ldd $$i"; \ fi; \ if [ "$$err" != "" ]; then \ ${ECHO} "$${i}: $$err"; \ error=1; \ fi; \ done; \ fi; \ if [ "$$error" = 1 ]; then \ ${ECHO} "*** The above programs/libs will not find the listed shared libraries"; \ ${ECHO} " at runtime. Please fix the package (add -Wl,-R.../lib in the right places)!"; \ ${SHCOMMENT} Might not error-out for non-pkg-developers; \ exit 1; \ fi .endif # NO_PKG_REGISTER .if !target(show-shlib-type) # Show the shared lib type being built: one of ELF, a.out, dylib, or none .PHONY: show-shlib-type show-shlib-type: . if empty(USE_LANGUAGES) @${ECHO} "none" . elif ${_OPSYS_SHLIB_TYPE} == "ELF/a.out" @cd ${WRKDIR} && \ sotype=none; \ if [ "X${MKPIC}" != "Xno" -a "X${NOPIC}" = "X" ]; then \ ${ECHO} "int main() { return(0); }" > a.$$$$.c; \ ${SETENV} PATH=${PATH} \ ${CC} ${CFLAGS} a.$$$$.c -o a.$$$$.out; \ case `${FILE_CMD} a.$$$$.out` in \ *ELF*dynamically*) \ sotype=ELF ;; \ *shared*library*) \ sotype="a.out" ;; \ *dynamically*) \ sotype="a.out" ;; \ esac; \ fi; \ ${ECHO} "$$sotype"; \ ${RM} -f a.$$$$.c a.$$$$.out . else @${ECHO} ${_OPSYS_SHLIB_TYPE} . endif # USE_LANGUAGES .endif .PHONY: acquire-extract-lock acquire-patch-lock acquire-tools-lock .PHONY: acquire-wrapper-lock acquire-configure-lock acquire-build-lock .PHONY: acquire-install-lock acquire-package-lock acquire-extract-lock: ${_ACQUIRE_LOCK} acquire-patch-lock: ${_ACQUIRE_LOCK} acquire-tools-lock: ${_ACQUIRE_LOCK} acquire-wrapper-lock: ${_ACQUIRE_LOCK} acquire-configure-lock: ${_ACQUIRE_LOCK} acquire-build-lock: ${_ACQUIRE_LOCK} acquire-install-lock: ${_ACQUIRE_LOCK} acquire-package-lock: ${_ACQUIRE_LOCK} .PHONY: release-extract-lock release-patch-lock release-tools-lock .PHONY: release-wrapper-lock release-configure-lock release-build-lock .PHONY: release-install-lock release-package-lock release-extract-lock: ${_RELEASE_LOCK} release-patch-lock: ${_RELEASE_LOCK} release-tools-lock: ${_RELEASE_LOCK} release-wrapper-lock: ${_RELEASE_LOCK} release-configure-lock: ${_RELEASE_LOCK} release-build-lock: ${_RELEASE_LOCK} release-install-lock: ${_RELEASE_LOCK} release-package-lock: ${_RELEASE_LOCK} ################################################################ # Skeleton targets start here # # You shouldn't have to change these. Either add the pre-* or # post-* targets/scripts or redefine the do-* targets. These # targets don't do anything other than checking for cookies and # call the necessary targets/scripts. ################################################################ .PHONY: fetch .if !target(fetch) fetch: @cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} real-fetch PKG_PHASE=fetch .endif .PHONY: extract .if !target(extract) extract: checksum ${WRKDIR} acquire-extract-lock ${_EXTRACT_COOKIE} release-extract-lock .endif .PHONY: patch .if !target(patch) patch: extract acquire-patch-lock ${_PATCH_COOKIE} release-patch-lock .endif .PHONY: tools .if !target(tools) tools: patch acquire-tools-lock ${_TOOLS_COOKIE} release-tools-lock .endif .PHONY: wrapper .if !target(wrapper) wrapper: tools acquire-wrapper-lock ${_WRAPPER_COOKIE} release-wrapper-lock .endif .PHONY: configure .if !target(configure) configure: wrapper acquire-configure-lock ${_CONFIGURE_COOKIE} release-configure-lock .endif .PHONY: build .if !target(build) build: configure acquire-build-lock ${_BUILD_COOKIE} release-build-lock .endif .PHONY: test .if !target(test) test: build ${_TEST_COOKIE} .endif .PHONY: install .if !target(install) install: ${_PKGSRC_BUILD_TARGETS} acquire-install-lock ${_INSTALL_COOKIE} release-install-lock .endif .PHONY: package .if !target(package) package: install acquire-package-lock ${_PACKAGE_COOKIE} release-package-lock .endif .PHONY: replace .if !target(replace) replace: ${_PKGSRC_BUILD_TARGETS} real-replace .endif .PHONY: undo-replace .if !target(undo-replace) undo-replace: real-undo-replace .endif ${_EXTRACT_COOKIE}: .if ${INTERACTIVE_STAGE:Mextract} == "extract" && defined(BATCH) @${ECHO} "*** The extract stage of this package requires user interaction" @${ECHO} "*** Please extract manually with \"cd ${PKGDIR} && ${MAKE} extract\"" @${TOUCH} ${_INTERACTIVE_COOKIE} @${FALSE} .else ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} real-extract DEPENDS_TARGET=${DEPENDS_TARGET:Q} PKG_PHASE=extract .endif ${_PATCH_COOKIE}: ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} real-patch PKG_PHASE=patch ${_TOOLS_COOKIE}: ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} real-tools PKG_PHASE=tools ${_WRAPPER_COOKIE}: ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${BUILD_ENV} ${MAKE} ${MAKEFLAGS} real-wrapper PKG_PHASE=wrapper PKG_ERROR_CLASSES+= configure PKG_ERROR_MSG.configure= \ "" \ "There was an error during the \`\`configure'' phase." \ "Please investigate the following for more information:" .if defined(GNU_CONFIGURE) PKG_ERROR_MSG.configure+= \ " * config.log" \ " * ${WRKLOG}" \ "" .else PKG_ERROR_MSG.configure+= \ " * log of the build" \ " * ${WRKLOG}" \ "" .endif ${_CONFIGURE_COOKIE}: .if ${INTERACTIVE_STAGE:Mconfigure} == "configure" && defined(BATCH) @${ECHO} "*** The configuration stage of this package requires user interaction" @${ECHO} "*** Please configure manually with \"cd ${PKGDIR} && ${MAKE} configure\"" @${TOUCH} ${_INTERACTIVE_COOKIE} @${FALSE} .else ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${BUILD_ENV} ${MAKE} ${MAKEFLAGS} real-configure PKG_PHASE=configure || ${PKG_ERROR_HANDLER.configure} .endif PKG_ERROR_CLASSES+= build PKG_ERROR_MSG.build= \ "" \ "There was an error during the \`\`build'' phase." \ "Please investigate the following for more information:" \ " * log of the build" \ " * ${WRKLOG}" \ "" ${_BUILD_COOKIE}: .if ${INTERACTIVE_STAGE:Mbuild} == "build" && defined(BATCH) @${ECHO} "*** The build stage of this package requires user interaction" @${ECHO} "*** Please build manually with \"cd ${PKGDIR} && ${MAKE} build\"" @${TOUCH} ${_INTERACTIVE_COOKIE} @${FALSE} .else ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${BUILD_ENV} ${MAKE} ${MAKEFLAGS} real-build PKG_PHASE=build || ${PKG_ERROR_HANDLER.build} .endif ${_TEST_COOKIE}: ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${BUILD_ENV} ${MAKE} ${MAKEFLAGS} real-test PKG_PHASE=test ${_INSTALL_COOKIE}: .if ${INTERACTIVE_STAGE:Minstall} == "install" && defined(BATCH) @${ECHO} "*** The installation stage of this package requires user interaction" @${ECHO} "*** Please install manually with \"cd ${PKGDIR} && ${MAKE} install\"" @${TOUCH} ${_INTERACTIVE_COOKIE} @${FALSE} .else ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${BUILD_ENV} ${MAKE} ${MAKEFLAGS} real-install PKG_PHASE=install .endif ${_PACKAGE_COOKIE}: ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${BUILD_ENV} ${MAKE} ${MAKEFLAGS} real-package PKG_PHASE=package .PHONY: extract-message patch-message tools-message wrapper-message .PHONY: configure-message build-message test-message extract-message: @${ECHO_MSG} "${_PKGSRC_IN}> Extracting for ${PKGNAME}" patch-message: @${ECHO_MSG} "${_PKGSRC_IN}> Patching for ${PKGNAME}" tools-message: @${ECHO_MSG} "${_PKGSRC_IN}> Overriding tools for ${PKGNAME}" wrapper-message: @${ECHO_MSG} "${_PKGSRC_IN}> Creating toolchain wrappers for ${PKGNAME}" configure-message: @${ECHO_MSG} "${_PKGSRC_IN}> Configuring for ${PKGNAME}" build-message: @${ECHO_MSG} "${_PKGSRC_IN}> Building for ${PKGNAME}" test-message: @${ECHO_MSG} "${_PKGSRC_IN}> Testing for ${PKGNAME}" .PHONY: extract-cookie patch-cookie tools-cookie wrapper-cookie .PHONY: configure-cookie build-cookie test-cookie extract-cookie: ${_PKG_SILENT}${_PKG_DEBUG}${ECHO} ${PKGNAME} >> ${_EXTRACT_COOKIE} patch-cookie: ${_PKG_SILENT}${_PKG_DEBUG}${_GENERATE_PATCH_COOKIE} tools-cookie: ${_PKG_SILENT}${_PKG_DEBUG} ${TOUCH} ${TOUCH_FLAGS} ${_TOOLS_COOKIE} wrapper-cookie: ${_PKG_SILENT}${_PKG_DEBUG} ${TOUCH} ${TOUCH_FLAGS} ${_WRAPPER_COOKIE} configure-cookie: ${_PKG_SILENT}${_PKG_DEBUG} ${TOUCH} ${TOUCH_FLAGS} ${_CONFIGURE_COOKIE} build-cookie: ${_PKG_SILENT}${_PKG_DEBUG} ${TOUCH} ${TOUCH_FLAGS} ${_BUILD_COOKIE} test-cookie: ${_PKG_SILENT}${_PKG_DEBUG} ${TOUCH} ${TOUCH_FLAGS} ${_TEST_COOKIE} .ORDER: pre-fetch do-fetch post-fetch .ORDER: extract-message extract-vars install-depends pre-extract do-extract post-extract extract-cookie .ORDER: patch-message patch-vars pre-patch do-patch post-patch patch-cookie .ORDER: tools-message tools-vars pre-tools do-tools post-tools tools-cookie .ORDER: wrapper-message wrapper-vars pre-wrapper do-wrapper post-wrapper wrapper-cookie .ORDER: configure-message configure-vars pre-configure pre-configure-override do-configure post-configure configure-cookie .ORDER: build-message build-vars pre-build do-build post-build build-cookie .ORDER: test-message pre-test do-test post-test test-cookie # Please note that the order of the following targets is important, and # should not be modified (.ORDER is not recognised by make(1) in a serial # make i.e. without -j n) .PHONY: real-fetch real-extract real-patch .PHONY: real-tools real-wrapper .PHONY: real-configure real-build real-test real-install real-package .PHONY: real-replace real-undo-replace real-fetch: pre-fetch do-fetch post-fetch real-extract: extract-message extract-vars install-depends pre-extract do-extract post-extract extract-cookie real-patch: patch-message patch-vars pre-patch do-patch post-patch patch-cookie real-tools: tools-message tools-vars pre-tools do-tools post-tools tools-cookie real-wrapper: wrapper-message wrapper-vars pre-wrapper do-wrapper post-wrapper wrapper-cookie real-configure: configure-message configure-vars pre-configure pre-configure-override do-configure post-configure configure-cookie real-build: build-message build-vars pre-build do-build post-build build-cookie real-test: test-message pre-test do-test post-test test-cookie real-install: install-vars do-su-install real-package: package-vars do-su-package real-replace: do-su-replace real-undo-replace: do-su-undo-replace _SU_TARGET= \ if [ `${ID} -u` = `${ID} -u ${ROOT_USER}` ]; then \ ${MAKE} ${MAKEFLAGS} $$realtarget; \ elif [ "X${BATCH}" != X"" ]; then \ ${ECHO_MSG} "Warning: Batch mode, not superuser, can't run $$action for ${PKGNAME}."; \ ${ECHO_MSG} "Become ${ROOT_USER} and try again to ensure correct permissions."; \ else \ args=""; \ if [ "X${FORCE_PKG_REGISTER}" != X"" ]; then \ args="FORCE_PKG_REGISTER=1"; \ fi; \ if [ "X${PKG_DEBUG_LEVEL}" != X"" ]; then \ args="$$args PKG_DEBUG_LEVEL=${PKG_DEBUG_LEVEL}"; \ fi; \ if [ "X${PRE_ROOT_CMD}" != "X${TRUE}" ]; then \ ${ECHO} "*** WARNING *** Running: ${PRE_ROOT_CMD}"; \ ${PRE_ROOT_CMD}; \ fi; \ ${ECHO_MSG} "${_PKGSRC_IN}> Becoming ${ROOT_USER}@`${HOSTNAME_CMD}` to $$action ${PKGBASE}."; \ ${ECHO_N} "`${ECHO} ${SU_CMD} | ${AWK} '{ print $$1 }'` ";\ ${SU_CMD} "cd ${.CURDIR}; ${SETENV} PATH=$${PATH}:${SU_CMD_PATH_APPEND} ${MAKE} $$args ${MAKEFLAGS} $$realtarget $$realflags"; \ fi .PHONY: do-su-install do-su-install: ${_PKG_SILENT}${_PKG_DEBUG} \ extractname=`${CAT} ${_EXTRACT_COOKIE}`; \ case "$$extractname" in \ "") ${ECHO_MSG} "*** Warning: ${WRKDIR} may contain an older version of ${PKGBASE}" ;; \ "${PKGNAME}") ;; \ *) ${ECHO_MSG} "*** Warning: Package version $$extractname in ${WRKDIR}"; \ ${ECHO_MSG} "*** Current version ${PKGNAME} in pkgsrc directory"; \ ${ECHO_MSG} "*** Cleaning and rebuilding the newer version of the package..."; \ ${MAKE} clean && ${MAKE} build ;; \ esac @${ECHO_MSG} "${_PKGSRC_IN}> Installing for ${PKGNAME}" ${_PKG_SILENT}${_PKG_DEBUG} \ realtarget="real-su-install"; \ action="install"; \ ${_SU_TARGET} .PHONY: do-su-package do-su-package: @${ECHO_MSG} "${_PKGSRC_IN}> Packaging ${PKGNAME}" ${_PKG_SILENT}${_PKG_DEBUG} \ realtarget="real-su-package"; \ action="package"; \ ${_SU_TARGET} .PHONY: do-su-replace do-su-replace: @${ECHO_MSG} "${_PKGSRC_IN}> Replacing ${PKGNAME}" ${_PKG_SILENT}${_PKG_DEBUG} \ realtarget="real-su-replace"; \ action="replace"; \ ${_SU_TARGET} .PHONY: do-su-undo-replace do-su-undo-replace: @${ECHO_MSG} "${_PKGSRC_IN}> Undoing Replacement of ${PKGNAME}" ${_PKG_SILENT}${_PKG_DEBUG} \ realtarget="real-su-undo-replace"; \ action="undo-replace"; \ ${_SU_TARGET} # Empty pre-* and post-* targets .for name in fetch extract patch tools wrapper configure build test install-script install package . if !target(pre-${name}) pre-${name}: @${DO_NADA} . endif . if !target(post-${name}) post-${name}: @${DO_NADA} . endif .endfor # Reinstall # # Special target to re-run install .PHONY: reinstall .if !target(reinstall) reinstall: ${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${_INSTALL_COOKIE} ${_PACKAGE_COOKIE} ${PLIST} ${_PKG_SILENT}${_PKG_DEBUG}DEPENDS_TARGET=${DEPENDS_TARGET:Q} ${MAKE} ${MAKEFLAGS} install .endif # Deinstall # # Special target to remove installation .PHONY: deinstall do-su-deinstall .if !target(deinstall) deinstall: do-su-deinstall .if !target(do-su-deinstall) do-su-deinstall: @${ECHO_MSG} "${_PKGSRC_IN}> Deinstalling for ${PKGBASE}" ${_PKG_SILENT}${_PKG_DEBUG} \ realtarget="real-su-deinstall"; \ realflags="DEINSTALLDEPENDS=${DEINSTALLDEPENDS}"; \ action="deinstall"; \ ${_SU_TARGET} .endif . if (${DEINSTALLDEPENDS} != "NO") . if (${DEINSTALLDEPENDS} != "ALL") # used for removing stuff in bulk builds real-su-deinstall-flags+= -r -R # used for "update" target . else real-su-deinstall-flags+= -r . endif . endif . if defined(PKG_VERBOSE) real-su-deinstall-flags+= -v . endif . if defined(PKG_PRESERVE) . if (${UPDATE_RUNNING} == "YES") # used to update w/o removing any files real-su-deinstall-flags+= -N -f . endif . endif .PHONY: real-su-deinstall real-su-deinstall: ${_PKG_SILENT}${_PKG_DEBUG} \ found="`${PKG_INFO} -e \"${PKGNAME}\" || ${TRUE}`"; \ case "$$found" in \ "") found="`${PKG_BEST_EXISTS} \"${PKGWILDCARD}\" || ${TRUE}`" ;; \ esac; \ if [ "$$found" != "" ]; then \ ${ECHO} Running ${PKG_DELETE} ${real-su-deinstall-flags} $$found ; \ ${PKG_DELETE} ${real-su-deinstall-flags} $$found || ${TRUE} ; \ fi . if (${DEINSTALLDEPENDS} != "NO") && (${DEINSTALLDEPENDS} != "ALL") @${SHCOMMENT} Also remove BUILD_DEPENDS: . for pkg in ${BUILD_DEPENDS:C/:.*$//} ${_PKG_SILENT}${_PKG_DEBUG} \ found="`${PKG_BEST_EXISTS} \"${pkg}\" || ${TRUE}`"; \ if [ "$$found" != "" ]; then \ ${ECHO} Running ${PKG_DELETE} $$found; \ ${PKG_DELETE} ${real-su-deinstall-flags} $$found || ${TRUE}; \ fi . endfor . endif # DEINSTALLDEPENDS @${RM} -f ${_INSTALL_COOKIE} ${_PACKAGE_COOKIE} \ ${_CHECK_FILES_COOKIES} \ ${_CHECK_FILES_PRE} ${_CHECK_FILES_POST} .endif # target(deinstall) ################################################################ # Some more targets supplied for users' convenience ################################################################ # The 'update' target can be used to update a package and all # currently installed packages that depend upon this package. .PHONY: update .if !target(update) .if exists(${DDIR}) RESUMEUPDATE?= YES CLEAR_DIRLIST?= NO update: ${_PKG_SILENT}${_PKG_DEBUG}${ECHO_MSG} \ "${_PKGSRC_IN}> Resuming update for ${PKGNAME}" . if ${REINSTALL} != "NO" && ${UPDATE_TARGET} != "replace" ${_PKG_SILENT}${_PKG_DEBUG} \ ${MAKE} ${MAKEFLAGS} deinstall UPDATE_RUNNING=YES DEINSTALLDEPENDS=ALL . endif .else RESUMEUPDATE?= NO CLEAR_DIRLIST?= YES update: ${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} ${DDIR} . if ${UPDATE_TARGET} != "replace" ${_PKG_SILENT}${_PKG_DEBUG}if ${PKG_INFO} -qe ${PKGBASE}; then \ ${MAKE} ${MAKEFLAGS} deinstall UPDATE_RUNNING=YES DEINSTALLDEPENDS=ALL \ || (${RM} ${DDIR} && ${FALSE}); \ fi . endif .endif ${_PKG_SILENT}${_PKG_DEBUG} \ ${MAKE} ${MAKEFLAGS} ${UPDATE_TARGET} KEEP_WRKDIR=YES \ DEPENDS_TARGET=${DEPENDS_TARGET:Q} ${_PKG_SILENT}${_PKG_DEBUG} \ [ ! -s ${DDIR} ] || for dep in `${CAT} ${DDIR}` ; do \ (if cd ../.. && cd "$${dep}" ; then \ ${ECHO_MSG} "${_PKGSRC_IN}> Installing in $${dep}" && \ if [ "(" "${RESUMEUPDATE}" = "NO" -o \ "${REINSTALL}" != "NO" ")" -a \ "${UPDATE_TARGET}" != "replace" ] ; then \ ${MAKE} ${MAKEFLAGS} deinstall UPDATE_RUNNING=YES; \ fi && \ ${MAKE} ${MAKEFLAGS} ${UPDATE_TARGET} \ DEPENDS_TARGET=${DEPENDS_TARGET:Q} ; \ else \ ${ECHO_MSG} "${_PKGSRC_IN}> Skipping removed directory $${dep}"; \ fi) ; \ done .if ${NOCLEAN} == "NO" ${_PKG_SILENT}${_PKG_DEBUG} \ ${MAKE} ${MAKEFLAGS} clean-update CLEAR_DIRLIST=YES .endif .PHONY: clean-update clean-update: ${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} ${DDIR} ${_PKG_SILENT}${_PKG_DEBUG} \ if [ -s ${DDIR} ] ; then \ for dep in `${CAT} ${DDIR}` ; do \ (if cd ../.. && cd "$${dep}" ; then \ ${MAKE} ${MAKEFLAGS} clean ; \ else \ ${ECHO_MSG} "${_PKGSRC_IN}> Skipping removed directory $${dep}";\ fi) ; \ done ; \ fi .if ${CLEAR_DIRLIST} != "NO" ${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} clean .else ${_PKG_SILENT}${_PKG_DEBUG} \ ${MAKE} ${MAKEFLAGS} clean update-dirlist \ DIRLIST="`${CAT} ${DDIR}`" PKGLIST="`${CAT} ${DLIST}`" ${_PKG_SILENT}${_PKG_DEBUG}${ECHO_MSG} \ "${_PKGSRC_IN}> Warning: preserved leftover directory list. Your next";\ ${ECHO_MSG} "${_PKGSRC_IN}> \`\`${MAKE} update'' may fail. It is advised to use";\ ${ECHO_MSG} "${_PKGSRC_IN}> \`\`${MAKE} update REINSTALL=YES'' instead!" .endif .endif # !target(update) .PHONY: update-dirlist update-dirlist: ${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} -p ${WRKDIR} .if defined(PKGLIST) . for __tmp__ in ${PKGLIST} ${_PKG_SILENT}${_PKG_DEBUG}${ECHO} >>${DLIST} "${__tmp__}" . endfor .endif .if defined(DIRLIST) . for __tmp__ in ${DIRLIST} ${_PKG_SILENT}${_PKG_DEBUG}${ECHO} >>${DDIR} "${__tmp__}" . endfor .endif ${DDIR}: ${DLIST} ${_PKG_SILENT}${_PKG_DEBUG} \ ddir=`${SED} 's:-[^-]*$$::' ${DLIST}`; \ ${ECHO} >${DDIR}; \ for pkg in $${ddir} ; do \ if ${PKG_INFO} -b "$${pkg}" >/dev/null 2>&1 ; then \ ${PKG_INFO} -b "$${pkg}" | ${SED} -ne \ 's,\([^/]*/[^/]*\)/Makefile:.*,\1,p' | \ ${HEAD} -1 >>${DDIR}; \ fi ; \ done ${DLIST}: ${WRKDIR} ${_PKG_SILENT}${_PKG_DEBUG} \ { ${PKG_DELETE} -n "${PKGWILDCARD}" 2>&1 | \ ${GREP} '^ ' | \ ${AWK} '{ l[NR]=$$0 } END { for (i=NR;i>0;--i) print l[i] }' \ || ${TRUE}; } > ${DLIST} # The 'info' target can be used to display information about a package. .PHONY: info info: ${_PKG_SILENT}${_PKG_DEBUG}${PKG_INFO} "${PKGWILDCARD}" # The 'check' target can be used to check an installed package. .PHONY: check check: ${_PKG_SILENT}${_PKG_DEBUG}${PKG_ADMIN} check "${PKGWILDCARD}" # The 'list' target can be used to list the files installed by a package. .PHONY: list list: ${_PKG_SILENT}${_PKG_DEBUG}${PKG_INFO} -L "${PKGWILDCARD}" # Run pkglint: .PHONY: lint lint: ${_PKG_SILENT}${_PKG_DEBUG}${LOCALBASE}/bin/pkglint # Create a binary package from an install package using "pkg_tarup" .PHONY: tarup tarup: .if ${PKG_INSTALLATION_TYPE} == "overwrite" ${_PKG_SILENT}${_PKG_DEBUG} \ ${RM} -f ${PACKAGES}/All/${PKGNAME}${PKG_SUFX}; \ ${SETENV} PKG_DBDIR=${_PKG_DBDIR} PKG_SUFX=${PKG_SUFX} \ PKGREPOSITORY=${PACKAGES}/All \ ${LOCALBASE}/bin/pkg_tarup ${PKGNAME}; \ for CATEGORY in ${CATEGORIES}; do \ ${MKDIR} ${PACKAGES}/$$CATEGORY; \ cd ${PACKAGES}/$$CATEGORY; \ ${RM} -f ${PKGNAME}${PKG_SUFX}; \ ${LN} -s ../All/${PKGNAME}${PKG_SUFX}; \ done .endif # shared code for replace and undo-replace _REPLACE= \ if [ -f ${_PKG_DBDIR}/$$oldpkgname/+REQUIRED_BY ]; then \ ${MV} ${_PKG_DBDIR}/$$oldpkgname/+REQUIRED_BY ${WRKDIR}/.req; \ fi; \ ${MAKE} deinstall UPDATE_RUNNING=YES; \ $$replace_action; \ if [ -f ${WRKDIR}/.req ]; then \ ${MV} ${WRKDIR}/.req ${_PKG_DBDIR}/$$newpkgname/+REQUIRED_BY; \ for pkg in `${CAT} ${_PKG_DBDIR}/$$newpkgname/+REQUIRED_BY`; do \ ${SETENV} NEWPKGNAME=$$newpkgname \ ${AWK} '/^@pkgdep '$$oldpkgname'/ { print "@pkgdep " ENVIRON["NEWPKGNAME"]; next } { print }' \ < ${_PKG_DBDIR}/$$pkg/+CONTENTS > ${_PKG_DBDIR}/$$pkg/+CONTENTS.$$$$ && \ ${MV} ${_PKG_DBDIR}/$$pkg/+CONTENTS.$$$$ ${_PKG_DBDIR}/$$pkg/+CONTENTS; \ done; \ fi # replace a package in place - not for the faint-hearted .PHONY: real-su-replace real-su-replace: ${_PKG_SILENT}${_PKG_DEBUG} \ ${ECHO_MSG} "*** WARNING - experimental target - data loss may occur ***"; \ if [ -x ${LOCALBASE}/bin/pkg_tarup ]; then \ ${SETENV} PKGREPOSITORY=${WRKDIR} ${LOCALBASE}/bin/pkg_tarup ${PKGBASE}; \ else \ ${ECHO} "No ${LOCALBASE}/bin/pkg_tarup binary - can't pkg_tarup ${PKGBASE}"; \ exit 1; \ fi ${_PKG_SILENT}${_PKG_DEBUG} \ oldpkgname=`${PKG_BEST_EXISTS} "${PKGWILDCARD}"`; \ newpkgname=${PKGNAME}; \ ${ECHO} "$$oldpkgname" > ${WRKDIR}/.replace; \ replace_action="${MAKE} install"; \ ${_REPLACE} # undo the replacement of a package - not for the faint-hearted either .PHONY: real-su-undo-replace real-su-undo-replace: ${_PKG_SILENT}${_PKG_DEBUG} \ if [ ! -f ${WRKDIR}/.replace ]; then \ ${ECHO_MSG} "No replacement to undo"; \ exit 1; \ fi ${_PKG_SILENT}${_PKG_DEBUG} \ ${ECHO_MSG} "*** WARNING - experimental target - data loss may occur ***"; \ oldpkgname=${PKGNAME}; \ newpkgname=`${CAT} ${WRKDIR}/.replace`; \ replace_action="${SETENV} ${PKG_ADD} ${WRKDIR}/$$newpkgname${PKG_SUFX}"; \ ${_REPLACE}; \ ${RM} ${WRKDIR}/.replace # This is for the use of sites which store distfiles which others may # fetch - only fetch the distfile if it is allowed to be # re-distributed freely .PHONY: mirror-distfiles mirror-distfiles: .if !defined(NO_SRC_ON_FTP) @${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} fetch NO_SKIP=yes .endif # Cleaning up .PHONY: pre-clean .if !target(pre-clean) pre-clean: @${DO_NADA} .endif .PHONY: clean .if !target(clean) clean: pre-clean . if (${CLEANDEPENDS} != "NO") && (!empty(BUILD_DEPENDS) || !empty(DEPENDS)) ${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} clean-depends . endif @${ECHO_MSG} "${_PKGSRC_IN}> Cleaning for ${PKGNAME}" ${_PKG_SILENT}${_PKG_DEBUG} \ if [ -d ${WRKDIR} ]; then \ if [ -w ${WRKDIR} ]; then \ ${RM} -rf ${WRKDIR}; \ else \ ${ECHO_MSG} "${_PKGSRC_IN}> ${WRKDIR} not writable, skipping"; \ fi; \ fi . if defined(WRKOBJDIR) -${_PKG_SILENT}${_PKG_DEBUG} \ ${RMDIR} ${BUILD_DIR} 2>/dev/null; \ ${RM} -f ${WRKDIR_BASENAME} . endif .endif .PHONY: clean-depends .if !target(clean-depends) clean-depends: . if !empty(BUILD_DEPENDS) || !empty(DEPENDS) ${_PKG_SILENT}${_PKG_DEBUG} \ for i in `${MAKE} ${MAKEFLAGS} show-all-depends-dirs-excl`; do \ cd ${.CURDIR}/../../$$i && \ ${MAKE} ${MAKEFLAGS} CLEANDEPENDS=NO clean; \ done . endif .endif .PHONY: pre-distclean .if !target(pre-distclean) pre-distclean: @${DO_NADA} .endif .PHONY: cleandir .if !target(cleandir) cleandir: clean .endif .PHONY: distclean .if !target(distclean) distclean: pre-distclean clean ${_PKG_SILENT}${ECHO_MSG} "${_PKGSRC_IN}> Dist cleaning for ${PKGNAME}" ${_PKG_SILENT}${_PKG_DEBUG}if [ -d ${_DISTDIR} ]; then \ cd ${_DISTDIR} && \ ${TEST} -z "${DISTFILES}" || ${RM} -f ${DISTFILES}; \ if [ "${PKG_RESUME_TRANSFERS:M[Yy][Ee][Ss]}" ]; then \ ${TEST} -z "${DISTFILES}.temp" || ${RM} -f ${DISTFILES}.temp; \ fi; \ ${TEST} -z "${PATCHFILES}" || ${RM} -f ${PATCHFILES}; \ fi . if defined(DIST_SUBDIR) && exists(DIST_SUBDIR) -${_PKG_SILENT}${_PKG_DEBUG}${RMDIR} ${_DISTDIR} . endif -${_PKG_SILENT}${_PKG_DEBUG}${RM} -f README.html .endif # Prints out a script to fetch all needed files (no checksumming). .PHONY: fetch-list .if !target(fetch-list) fetch-list: @${ECHO} '#!/bin/sh' @${ECHO} '#' @${ECHO} '# This is an auto-generated script, the result of running' @${ECHO} '# `${MAKE} fetch-list'"'"' in directory "'"`${PWD_CMD}`"'"' @${ECHO} '# on host "'"`${UNAME} -n`"'" on "'"`date`"'".' @${ECHO} '#' @${MAKE} ${MAKEFLAGS} fetch-list-recursive .endif # !target(fetch-list) .PHONY: fetch-list-recursive .if !target(fetch-list-recursive) fetch-list-recursive: ${_PKG_SILENT}${_PKG_DEBUG} \ for dir in `${MAKE} ${MAKEFLAGS} show-all-depends-dirs`; do \ (cd ../../$$dir && \ ${MAKE} ${MAKEFLAGS} fetch-list-one-pkg \ | ${AWK} ' \ /^[^#]/ { FoundSomething = 1 } \ /^unsorted/ { gsub(/[[:space:]]+/, " \\\n\t") } \ /^echo/ { gsub(/;[[:space:]]+/, "\n") } \ { block[line_c++] = $$0 } \ END { if (FoundSomething) \ for (line = 0; line < line_c; line++) \ print block[line] } \ ') \ done .endif # !target(fetch-list-recursive) .PHONY: fetch-list-one-pkg .if !target(fetch-list-one-pkg) fetch-list-one-pkg: . if !empty(_ALLFILES) @${ECHO} @${ECHO} '#' @location=`${PWD_CMD} | ${AWK} -F / '{ print $$(NF-1) "/" $$NF }'`; \ ${ECHO} '# Need additional files for ${PKGNAME} ('$$location')...' . for fetchfile in ${_ALLFILES} . if defined(_FETCH_MESSAGE) @(if [ ! -f ${_DISTDIR}/${fetchfile:T} ]; then \ ${ECHO}; \ filesize=`${AWK} ' \ /^Size/ && $$2 == "(${fetchfile})" { print $$4 } \ ' ${DISTINFO_FILE}` || true; \ ${ECHO} '# Prompt user to get ${fetchfile} ('$${filesize-???}' bytes) manually:'; \ ${ECHO} '#'; \ ${ECHO} ${_FETCH_MESSAGE:Q}; \ fi) . elif defined(DYNAMIC_MASTER_SITES) @(if [ ! -f ${_DISTDIR}/${fetchfile:T} ]; then \ ${ECHO}; \ filesize=`${AWK} ' \ /^Size/ && $$2 == "(${fetchfile})" { print $$4 } \ ' ${DISTINFO_FILE}` || true; \ ${ECHO} '# Fetch ${fetchfile} ('$${filesize-???}' bytes):'; \ ${ECHO} '#'; \ ${ECHO} '${SH} -s ${fetchfile:T} <<"EOF" |('; \ ${CAT} ${FILESDIR}/getsite.sh; \ ${ECHO} EOF; \ ${ECHO} read unsorted_sites; \ ${ECHO} 'unsorted_sites="$${unsorted_sites} ${_MASTER_SITE_BACKUP}"'; \ ${ECHO} sites='"'${ORDERED_SITES:Q}'"'; \ ${ECHO} "${MKDIR} ${_DISTDIR}"; \ ${ECHO} 'cd ${_DISTDIR} && [ -f ${fetchfile} -o -f ${fetchfile:T} ] ||'; \ ${ECHO} 'for site in $$sites; do'; \ ${ECHO} ' ${FETCH_CMD} ${FETCH_BEFORE_ARGS} "$${site}${fetchfile:T}" ${FETCH_AFTER_ARGS} && break ||'; \ ${ECHO} ' ${ECHO} ${fetchfile:T} not fetched'; \ ${ECHO} done; \ ${ECHO} ')'; \ fi) . else @(if [ ! -f ${_DISTDIR}/${fetchfile:T} ]; then \ ${ECHO}; \ filesize=`${AWK} ' \ /^Size/ && $$2 == "(${fetchfile})" { print $$4 } \ ' ${DISTINFO_FILE}` || true; \ ${ECHO} '# Fetch ${fetchfile} ('$${filesize-???}' bytes):'; \ ${ECHO} '#'; \ ${ECHO} 'unsorted_sites="${SITES_${fetchfile:T:S/=/--/}} ${_MASTER_SITE_BACKUP}"'; \ ${ECHO} sites='"'${ORDERED_SITES:Q}'"'; \ ${ECHO} "${MKDIR} ${_DISTDIR}"; \ ${ECHO} 'cd ${_DISTDIR} && [ -f ${fetchfile} -o -f ${fetchfile:T} ] ||'; \ ${ECHO} 'for site in $$sites; do'; \ ${ECHO} ' ${FETCH_CMD} ${FETCH_BEFORE_ARGS} "$${site}${fetchfile:T}" ${FETCH_AFTER_ARGS} && break ||'; \ ${ECHO} ' ${ECHO} ${fetchfile:T} not fetched'; \ ${ECHO} done; \ fi) . endif # defined(_FETCH_MESSAGE) || defined(DYNAMIC_MASTER_SITES) . endfor . endif # !empty(_ALLFILES) .endif # !target(fetch-list-one-pkg) # Checksumming utilities .PHONY: makesum .if !target(makesum) makesum: fetch uptodate-digest ${_PKG_SILENT}${_PKG_DEBUG} \ newfile=${DISTINFO_FILE}.$$$$; \ if [ -f ${DISTINFO_FILE} ]; then \ ${GREP} '^.NetBSD' ${DISTINFO_FILE} > $$newfile || \ (${ECHO_N} "$$" > $$newfile && \ ${ECHO_N} "NetBSD" >> $$newfile && \ ${ECHO} "$$" >> $$newfile) \ else \ ${ECHO_N} "$$" > $$newfile; \ ${ECHO_N} "NetBSD" >> $$newfile; \ ${ECHO} "$$" >> $$newfile; \ fi; \ ${ECHO} "" >> $$newfile; \ cd ${DISTDIR}; \ for sumfile in "" ${_CKSUMFILES}; do \ if [ "X$$sumfile" = "X" ]; then continue; fi; \ for a in "" ${DIGEST_ALGORITHMS}; do \ if [ "X$$a" = "X" ]; then continue; fi; \ ${DIGEST} $$a $$sumfile >> $$newfile; \ done; \ ${WC} -c $$sumfile | ${AWK} '{ print "Size (" $$2 ") = " $$1 " bytes" }' >> $$newfile; \ done; \ for ignore in "" ${_IGNOREFILES}; do \ if [ "X$$ignore" = "X" ]; then continue; fi; \ for a in "" ${DIGEST_ALGORITHMS}; do \ if [ "X$$a" = "X" ]; then continue; fi; \ ${ECHO} "$$a ($$ignore) = IGNORE" >> $$newfile; \ done; \ done; \ if [ -f ${DISTINFO_FILE} ]; then \ ${AWK} '$$2 ~ /\(patch-[a-z0-9]+\)/ { print $$0 }' < ${DISTINFO_FILE} >> $$newfile; \ fi; \ if ${CMP} -s $$newfile ${DISTINFO_FILE}; then \ ${RM} -f $$newfile; \ ${ECHO_MSG} "=> distinfo: distfiles part unchanged."; \ else \ ${MV} $$newfile ${DISTINFO_FILE}; \ fi .endif .if !target(makepatchsum) makepatchsum mps: uptodate-digest ${_PKG_SILENT}${_PKG_DEBUG} \ newfile=${DISTINFO_FILE}.$$$$; \ if [ -f ${DISTINFO_FILE} ]; then \ ${AWK} '$$2 !~ /\(patch-[a-z0-9]+\)/ { print $$0 }' < ${DISTINFO_FILE} >> $$newfile; \ else \ ${ECHO} "\$$""NetBSD""\$$" > $$newfile; \ ${ECHO} "" >> $$newfile; \ fi; \ if [ -d ${PATCHDIR} ]; then \ (cd ${PATCHDIR}; \ for sumfile in "" patch-*; do \ case $$sumfile in \ "" | "patch-*") ;; \ patch-local-* | *.orig | *.rej | *~) ;; \ *) ${ECHO} "${PATCH_DIGEST_ALGORITHM} ($$sumfile) = `${SED} -e '/\$$NetBSD.*/d' $$sumfile | ${DIGEST} ${PATCH_DIGEST_ALGORITHM}`" >> $$newfile;; \ esac; \ done); \ fi; \ if ${CMP} -s $$newfile ${DISTINFO_FILE}; then \ ${RM} -f $$newfile; \ ${ECHO_MSG} "=> distinfo: patches part unchanged."; \ else \ ${MV} $$newfile ${DISTINFO_FILE}; \ fi .endif # This target is done by invoking a sub-make so that DISTINFO_FILE gets # re-evaluated after the "makepatchsum" target is made. This can be # made into: #makedistinfo mdi: makepatchsum makesum # once a combined distinfo file exists for all packages .if !target(makedistinfo) makedistinfo mdi distinfo: makepatchsum ${_PKG_SILENT}${_PKG_DEBUG}${MAKE} makesum .endif .PHONY: checksum .if !target(checksum) checksum: fetch uptodate-digest ${_PKG_SILENT}${_PKG_DEBUG} \ if [ ! -f ${DISTINFO_FILE} ]; then \ ${ECHO_MSG} "=> No checksum file."; \ else \ (cd ${DISTDIR}; OK="true"; missing=""; \ for file in "" ${_CKSUMFILES}; do \ if [ "X$$file" = X"" ]; then continue; fi; \ filesummed=false; \ for a in ${DIGEST_ALGORITHMS}; do \ CKSUM2=`${AWK} 'NF == 4 && $$1 == "'$$a'" && $$2 == "('$$file')" && $$3 == "=" {print $$4; exit}' ${DISTINFO_FILE}`; \ case "$${CKSUM2}" in \ "") ${ECHO_MSG} "=> No $$a checksum recorded for $$file."; \ ;; \ *) filesummed=true; \ CKSUM=`${DIGEST} $$a < $$file`; \ if [ "$$CKSUM2" = "IGNORE" ]; then \ ${ECHO_MSG} "=> Checksum for $$file is set to IGNORE in checksum file even though"; \ ${ECHO_MSG} " the file is not in the "'$$'"{IGNOREFILES} list."; \ OK="false"; \ elif [ "$$CKSUM" = "$$CKSUM2" ]; then \ ${ECHO_MSG} "=> Checksum $$a OK for $$file."; \ else \ ${ECHO_MSG} "=> Checksum $$a mismatch for $$file."; \ OK="false"; \ fi ;; \ esac; \ done; \ case "$$filesummed" in \ false) missing="$$missing $$file"; \ OK=false ;; \ esac; \ done; \ for file in "" ${_IGNOREFILES}; do \ if [ "X$$file" = X"" ]; then continue; fi; \ CKSUM2=`${AWK} 'NF == 4 && $$3 == "=" && $$2 == "('$$file')"{print $$4; exit}' ${DISTINFO_FILE}`; \ if [ "$$CKSUM2" = "" ]; then \ ${ECHO_MSG} "=> No checksum recorded for $$file, file is in "'$$'"{IGNOREFILES} list."; \ OK="false"; \ elif [ "$$CKSUM2" != "IGNORE" ]; then \ ${ECHO_MSG} "=> Checksum for $$file is not set to IGNORE in checksum file even though"; \ ${ECHO_MSG} " the file is in the "'$$'"{IGNOREFILES} list."; \ OK="false"; \ fi; \ done; \ if [ "$$OK" != "true" ]; then \ case "$$missing" in \ "") ;; \ *) ${ECHO_MSG} "Missing checksums for $$missing";; \ esac; \ ${ECHO_MSG} "Make sure the Makefile and checksum file (${DISTINFO_FILE})"; \ ${ECHO_MSG} "are up to date. If you want to override this check, type"; \ ${ECHO_MSG} "\"${MAKE} NO_CHECKSUM=yes [other args]\"."; \ exit 1; \ fi) ; \ fi .endif # List of sites carrying binary pkgs. Variables "rel" and "arch" are # replaced with OS release ("1.5", ...) and architecture ("mipsel", ...) BINPKG_SITES?= \ ftp://ftp.NetBSD.org/pub/NetBSD/packages/$${rel}/$${arch} # List of flags to pass to pkg_add(1) for bin-install: BIN_INSTALL_FLAGS?= # -v .if ${PKG_INSTALLATION_TYPE} == "pkgviews" PKG_ARGS_ADD= -W ${LOCALBASE} -w ${DEFAULT_VIEW} .endif _BIN_INSTALL_FLAGS= ${BIN_INSTALL_FLAGS} .if defined(_AUTOMATIC) && !empty(_AUTOMATIC:Myes) _BIN_INSTALL_FLAGS+= -a .endif _BIN_INSTALL_FLAGS+= ${PKG_ARGS_ADD} # Install binary pkg, without strict uptodate-check first .PHONY: real-su-bin-install real-su-bin-install: @found="`${PKG_BEST_EXISTS} \"${PKGWILDCARD}\" || ${TRUE}`"; \ if [ "$$found" != "" ]; then \ ${ECHO_MSG} "${_PKGSRC_IN}> $$found is already installed - perhaps an older version?"; \ ${ECHO_MSG} "*** If so, you may wish to \`\`pkg_delete $$found'' and install"; \ ${ECHO_MSG} "*** this package again by \`\`${MAKE} bin-install'' to upgrade it properly."; \ ${SHCOMMENT} ${ECHO_MSG} "*** or use \`\`${MAKE} bin-update'' to upgrade it and all of its dependencies."; \ exit 1; \ fi @if [ -f ${PKGFILE} ] ; then \ ${ECHO_MSG} "Installing from binary pkg ${PKGFILE}" ; \ ${PKG_ADD} ${_BIN_INSTALL_FLAGS} ${PKGFILE} ; \ else \ rel=`${UNAME} -r | ${SED} 's@\.\([0-9]*\)[\._].*@\.\1@'`; \ arch=${MACHINE_ARCH}; \ for site in ${BINPKG_SITES} ; do \ ${ECHO} Trying `eval ${ECHO} $$site`/All ; \ ${SHCOMMENT} ${ECHO} ${SETENV} PKG_PATH="`eval ${ECHO} $$site`/All" ${PKG_ADD} ${_BIN_INSTALL_FLAGS} ${PKGNAME}${PKG_SUFX} ; \ if ${SETENV} PKG_PATH="`eval ${ECHO} $$site`/All" ${PKG_ADD} ${_BIN_INSTALL_FLAGS} ${PKGNAME}${PKG_SUFX} ; then \ ${ECHO} "${PKGNAME} successfully installed."; \ break ; \ fi ; \ done ; \ if ! ${PKG_INFO} -qe "${PKGNAME}" ; then \ ${SHCOMMENT} Cycle through some FTP server here ;\ ${ECHO_MSG} "Installing from source" ; \ ${MAKE} ${MAKEFLAGS} package \ DEPENDS_TARGET=${DEPENDS_TARGET:Q} && \ ${MAKE} ${MAKEFLAGS} clean ; \ fi ; \ fi .PHONY: bin-install bin-install: @${ECHO_MSG} "${_PKGSRC_IN}> Binary install for ${PKGNAME}" ${_PKG_SILENT}${_PKG_DEBUG} \ realtarget="real-su-bin-install"; \ action="binary install"; \ ${_SU_TARGET} ################################################################ # The special package-building targets # You probably won't need to touch these ################################################################ # Set to "html" by the README.html target to generate HTML code, # or to "svr4" to print SVR4 (Solaris, ...) short package names, from # SVR4_PKGNAME variable. # This variable is passed down via build-depends-list and run-depends-list PACKAGE_NAME_TYPE?= name _HTML_PKGNAME= ${PKGNAME:S/&/\&/g:S/>/\>/g:S//\>/g:S/${_HTML_PKGNAME} .PHONY: package-name .if !target(package-name) package-name: . if (${PACKAGE_NAME_TYPE} == "html") @${ECHO} ${_HTML_PKGLINK:Q} . elif (${PACKAGE_NAME_TYPE} == "svr4") @${ECHO} ${SVR4_PKGNAME} . else @${ECHO} ${PKGNAME} . endif # PACKAGE_NAME_TYPE .endif # !target(package-name) .PHONY: make-readme-html-help .if !target(make-readme-html-help) make-readme-html-help: @${ECHO} '${PKGNAME:S/&/\&/g:S/>/\>/g:S/: '${COMMENT:S/&/\&/g:S/>/\>/g:S//dev/null; then \ ${MAKE} ${MAKEFLAGS} package-name PACKAGE_NAME_TYPE=${PACKAGE_NAME_TYPE}; \ else \ ${ECHO_MSG} "Warning: \"$$dir\" non-existent -- @pkgdep registration incomplete" >&2; \ fi; \ fi . endfor .endif # target(run-depends-list) # Build a package but don't check the package cookie .PHONY: repackage .if !target(repackage) repackage: pre-repackage package .PHONY: pre-repackage pre-repackage: ${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${_PACKAGE_COOKIE} .endif # Build a package but don't check the cookie for installation, also don't # install package cookie .PHONY: package-noinstall .if !target(package-noinstall) package-noinstall: ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} PACKAGE_NOINSTALL=yes real-package .endif ################################################################ # Dependency checking ################################################################ .PHONY: install-depends pre-install-depends pre-install-depends: .if !target(install-depends) # Tells whether to halt execution if the object formats differ FATAL_OBJECT_FMT_SKEW?= yes WARN_NO_OBJECT_FMT?= yes install-depends: pre-install-depends . if !empty(DEPENDS) || !empty(BUILD_DEPENDS) . if defined(NO_DEPENDS) @${DO_NADA} . else # !DEPENDS . for dep in ${DEPENDS} ${BUILD_DEPENDS} ${_PKG_SILENT}${_PKG_DEBUG} \ pkg="${dep:C/:.*//}"; \ dir="${dep:C/[^:]*://:C/:.*$//}"; \ found=`${PKG_BEST_EXISTS} "$$pkg" || ${TRUE}`; \ if [ "X$$REBUILD_DOWNLEVEL_DEPENDS" != "X" ]; then \ pkgname=`cd $$dir ; ${MAKE} ${MAKEFLAGS} show-var VARNAME=PKGNAME`; \ if [ "X$$found" != "X" -a "X$$found" != "X$${pkgname}" ]; then \ ${ECHO_MSG} "ignoring old installed package \"$$found\""; \ found=""; \ fi; \ fi; \ if [ "$$found" != "" ]; then \ instobjfmt=`${PKG_INFO} -B "$$found" | ${AWK} -F'=[ \t]*' '/^OBJECT_FMT/ {print $$2; exit}'`; \ if [ "$$instobjfmt" = "" ]; then \ if [ "X${WARN_NO_OBJECT_FMT}" != "Xno" ]; then \ ${ECHO} "WARNING: Unknown object format for installed package $$found - continuing"; \ fi; \ elif [ "$$instobjfmt" != "${OBJECT_FMT}" ]; then \ ${ECHO} "Installed package $$found is an $$instobjfmt package."; \ ${ECHO} "You are building an ${OBJECT_FMT} package, which will not inter-operate."; \ ${ECHO} "Please update the $$found package to ${OBJECT_FMT}"; \ if [ "X${FATAL_OBJECT_FMT_SKEW}" != "Xno" ]; then \ exit 1; \ fi; \ fi; \ ${ECHO_MSG} "${_PKGSRC_IN}> Required installed package $${pkg}: $${found} found"; \ else \ ${ECHO_MSG} "${_PKGSRC_IN}> Required package $${pkg}: NOT found"; \ target=${DEPENDS_TARGET:Q}; \ ${ECHO_MSG} "${_PKGSRC_IN}> Verifying $$target for $$dir"; \ if [ ! -d $$dir ]; then \ ${ECHO_MSG} "=> No directory for $$dir. Skipping.."; \ else \ cd $$dir ; \ ${SETENV} _PKGSRC_DEPS=", ${PKGNAME}${_PKGSRC_DEPS}" PKGNAME_REQD=\'$$pkg\' ${MAKE} ${MAKEFLAGS} _AUTOMATIC=YES $$target || exit 1; \ ${ECHO_MSG} "${_PKGSRC_IN}> Returning to build of ${PKGNAME}"; \ fi; \ fi . endfor # DEPENDS . endif # !NO_DEPENDS . endif # DEPENDS .endif .PHONY: build-depends-list .if !target(build-depends-list) build-depends-list: @for dir in `${MAKE} ${MAKEFLAGS} show-all-depends-dirs-excl`; \ do \ (cd ../../$$dir && \ ${MAKE} ${MAKEFLAGS} package-name) \ done .endif # If PACKAGES is set to the default (../../pkgsrc/packages), the current # ${MACHINE_ARCH} and "release" (uname -r) will be used. Otherwise a directory # structure of ...pkgsrc/packages/`uname -r`/${MACHINE_ARCH} is assumed. # The PKG_URL is set from FTP_PKG_URL_* or CDROM_PKG_URL_*, depending on # the target used to generate the README.html file. .PHONY: binpkg-list .if !target(binpkg-list) binpkg-list: @if ${TEST} -d ${PACKAGES}; then \ cd ${PACKAGES}; \ case ${.CURDIR} in \ */pkgsrc/packages) \ for pkg in ${PKGREPOSITORYSUBDIR}/${PKGWILDCARD}${PKG_SUFX} ; \ do \ if [ -f "$$pkg" ] ; then \ pkgname=`${ECHO} $$pkg | ${SED} 's@.*/@@'`; \ ${ECHO} "${MACHINE_ARCH}:$$pkgname(${OPSYS} ${OS_VERSION})"; \ fi ; \ done ; \ ;; \ *) \ cd ${PACKAGES}/../..; \ for i in [1-9].*/*; do \ if cd ${PACKAGES}/../../$$i/${PKGREPOSITORYSUBDIR} 2>/dev/null; then \ for j in ${PKGWILDCARD}${PKG_SUFX}; \ do \ if [ -f "$$j" ]; then \ ${ECHO} $$i/$$j;\ fi; \ done; \ fi; \ done | ${AWK} -F/ ' \ { \ release = $$1; \ arch = $$2; \ pkg = $$3; \ gsub("\\.tgz","", pkg); \ if (arch != "m68k" && arch != "mipsel") { \ if (arch in urls) \ urls[arch "/" pkg "/" release] = "" pkg ", " urls[arch]; \ else \ urls[arch "/" pkg "/" release] = "" pkg " "; \ } \ } \ END { \ for (av in urls) { \ split(av, ava, "/"); \ arch=ava[1]; \ pkg=ava[2]; \ release=ava[3]; \ print "" arch ":" urls[av] "(${OPSYS} " release ")"; \ } \ }' | ${SORT} \ ;; \ esac; \ fi .endif ################################################################ # Everything after here are internal targets and really # shouldn't be touched by anybody but the release engineers. ################################################################ # This target generates an index entry suitable for aggregation into # a large index. Format is: # # distribution-name|package-path|installation-prefix|comment| \ # description-file|maintainer|categories|build deps|run deps|for arch| \ # not for opsys # .PHONY: describe .if !target(describe) describe: @${ECHO_N} "${PKGNAME}|${.CURDIR}|"; \ ${ECHO_N} "${PREFIX}|"; \ ${ECHO_N} ${COMMENT:Q}; \ if [ -f ${DESCR_SRC} ]; then \ ${ECHO_N} "|${DESCR_SRC}"; \ else \ ${ECHO_N} "|/dev/null"; \ fi; \ ${ECHO_N} "|${MAINTAINER}|${CATEGORIES}|"; \ case "A${BUILD_DEPENDS}B${DEPENDS}C" in \ ABC) ;; \ *) cd ${.CURDIR} && ${ECHO_N} `${MAKE} ${MAKEFLAGS} build-depends-list | ${SORT} -u`;; \ esac; \ ${ECHO_N} "|"; \ if [ "${DEPENDS}" != "" ]; then \ cd ${.CURDIR} && ${ECHO_N} `${MAKE} ${MAKEFLAGS} run-depends-list | ${SORT} -u`; \ fi; \ ${ECHO_N} "|"; \ if [ "${ONLY_FOR_ARCHS}" = "" ]; then \ ${ECHO_N} "any"; \ else \ ${ECHO_N} "${ONLY_FOR_ARCHS}"; \ fi; \ ${ECHO_N} "|"; \ if [ "${NOT_FOR_OPSYS}" = "" ]; then \ ${ECHO_N} "any"; \ else \ ${ECHO_N} "not ${NOT_FOR_OPSYS}"; \ fi; \ ${ECHO} "" .endif .PHONY: readmes .if !target(readmes) readmes: readme .endif # This target is used to generate README.html files .PHONY: readme .if !target(readme) FTP_PKG_URL_HOST?= ftp://ftp.NetBSD.org FTP_PKG_URL_DIR?= /pub/NetBSD/packages readme: @cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} README.html PKG_URL=${FTP_PKG_URL_HOST}${FTP_PKG_URL_DIR} .endif # This target is used to generate README.html files, very like "readme" # However, a different target was used for ease of use. .PHONY: cdrom-readme .if !target(cdrom-readme) CDROM_PKG_URL_HOST?= file://localhost CDROM_PKG_URL_DIR?= /usr/pkgsrc/packages cdrom-readme: @cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} README.html PKG_URL=${CDROM_PKG_URL_HOST}${CDROM_PKG_URL_DIR} .endif README_NAME= ${TEMPLATES}/README.pkg # set up the correct license information as a sed expression .if defined(LICENSE) SED_LICENSE_EXPR= -e 's|%%LICENSE%%|

Please note that this package has a ${LICENSE} license.

|' .else SED_LICENSE_EXPR= -e 's|%%LICENSE%%||' .endif # set up the "more info URL" information as a sed expression .if defined(HOMEPAGE) SED_HOMEPAGE_EXPR= -e 's|%%HOMEPAGE%%|

This package has a home page at ${HOMEPAGE}.

|' .else SED_HOMEPAGE_EXPR= -e 's|%%HOMEPAGE%%||' .endif .PHONY: show-vulnerabilities-html show-vulnerabilities-html: ${_PKG_SILENT}${_PKG_DEBUG} \ if [ -f ${PKGVULNDIR}/pkg-vulnerabilities ]; then \ ${AWK} '/^${PKGBASE}[-<>=]+[0-9]/ { gsub("\<", "\\<", $$1); \ gsub("\>", "\\>", $$1); \ printf("
  • %s has a %s exploit (see %s for more details)
    • \n", $$1, $$2, $$3, $$3) }' \ ${PKGVULNDIR}/pkg-vulnerabilities; \ fi # If PACKAGES is set to the default (../../packages), the current # ${MACHINE_ARCH} and "release" (uname -r) will be used. Otherwise a directory # structure of ...pkgsrc/packages/`uname -r`/${MACHINE_ARCH} is assumed. # The PKG_URL is set from FTP_PKG_URL_* or CDROM_PKG_URL_*, depending on # the target used to generate the README.html file. .PHONY: README.html README.html: .PRECIOUS @${SETENV} AWK=${AWK} BMAKE=${MAKE} ../../mk/scripts/mkdatabase -f $@.tmp1 @if ${TEST} -d ${PACKAGES}; then \ cd ${PACKAGES}; \ case `${PWD_CMD}` in \ ${PKGSRCDIR}/packages) \ MULTIARCH=no; \ ;; \ *) \ MULTIARCH=yes; \ ;; \ esac; \ cd ${.CURDIR} ; \ fi; \ ${AWK} -f ../../mk/scripts/genreadme.awk \ builddependsfile=/dev/null \ dependsfile=/dev/null \ AWK=${AWK:Q} \ CMP=${CMP:Q} \ DISTDIR=${DISTDIR:Q} \ GREP=${GREP:Q} \ PACKAGES=${PACKAGES:Q} \ PKG_INFO=${PKG_INFO:Q} \ PKG_SUFX=${PKG_SUFX:Q} \ PKG_URL=${PKG_URL:Q} \ PKGSRCDIR=${.CURDIR:C|/[^/]*/[^/]*$||:Q} \ SED=${SED:Q} \ SETENV=${SETENV:Q} \ SORT=${SORT:Q} \ TMPDIR=${TMPDIR:U/tmp:Q} \ SINGLEPKG=${PKGPATH:Q} \ $@.tmp1 @${RM} $@.tmp1 .PHONY: show-pkgtools-version .if !target(show-pkgtools-version) show-pkgtools-version: @${ECHO} ${PKGTOOLS_VERSION} .endif # convenience target, to display make variables from command line # i.e. "make show-var VARNAME=var", will print var's value .PHONY: show-var show-var: @${ECHO} ${${VARNAME}:Q} # enhanced version of target above, to display multiple variables .PHONY: show-vars show-vars: .for VARNAME in ${VARNAMES} @${ECHO} ${${VARNAME}:Q} .endfor # displays multiple variables as shell expressions # VARS is space separated list of VARNAME:shellvarname .PHONY: show-vars-eval show-vars-eval: .for var in ${VARS} @${ECHO} ${var:C/^.*://}="${${var:C/:.*$//}:Q}" .endfor .PHONY: print-build-depends-list .if !target(print-build-depends-list) print-build-depends-list: . if !empty(BUILD_DEPENDS) || !empty(DEPENDS) @${ECHO_N} 'This package requires package(s) "' @${ECHO_N} `${MAKE} ${MAKEFLAGS} build-depends-list | ${SORT} -u` @${ECHO} '" to build.' . endif .endif .PHONY: print-run-depends-list .if !target(print-run-depends-list) print-run-depends-list: . if !empty(DEPENDS) @${ECHO_N} 'This package requires package(s) "' @${ECHO_N} `${MAKE} ${MAKEFLAGS} run-depends-list | ${SORT} -u` @${ECHO} '" to run.' . endif .endif # This target is used by the mk/scripts/mkreadme script to generate # README.html files .PHONY: print-summary-data .if !target(print-summary-data) print-summary-data: @${ECHO} depends ${PKGPATH} ${DEPENDS:Q} @${ECHO} build_depends ${PKGPATH} ${BUILD_DEPENDS:Q} @${ECHO} conflicts ${PKGPATH} ${CONFLICTS:Q} @${ECHO} index ${PKGPATH} ${PKGNAME:Q} @${ECHO} htmlname ${PKGPATH} ${_HTML_PKGLINK:Q} @${ECHO} homepage ${PKGPATH} ${HOMEPAGE:Q} @${ECHO} wildcard ${PKGPATH} ${PKGWILDCARD:Q} @${ECHO} comment ${PKGPATH} ${COMMENT:Q} @${ECHO} license ${PKGPATH} ${LICENSE:Q} @if [ "${ONLY_FOR_ARCHS}" = "" ]; then \ ${ECHO} "onlyfor ${PKGPATH} any"; \ else \ ${ECHO} "onlyfor ${PKGPATH} ${ONLY_FOR_ARCHS}"; \ fi; @if [ "${NOT_FOR_OPSYS}" = "" ]; then \ ${ECHO} "notfor ${PKGPATH} any"; \ else \ ${ECHO} "notfor ${PKGPATH} not ${NOT_FOR_OPSYS}"; \ fi; @${ECHO} "maintainer ${PKGPATH} ${MAINTAINER}" @${ECHO} "categories ${PKGPATH} ${CATEGORIES}" @if [ -f ${DESCR_SRC} ]; then \ ${ECHO} "descr ${PKGPATH} ${DESCR_SRC:S;${PKGSRCDIR}/;;g}"; \ else \ ${ECHO} "descr ${PKGPATH} /dev/null"; \ fi @${ECHO} "prefix ${PKGPATH} ${PREFIX}" .endif LICENSE_FILE?= ${PKGSRCDIR}/licenses/${LICENSE} .if !target(show-license) show-license show-licence: @license=${LICENSE:Q}; \ license_file=${LICENSE_FILE:Q}; \ pager=${PAGER:Q}; \ case "$$pager" in "") pager=${CAT:Q};; esac; \ case "$$license" in "") exit 0;; esac; \ if ${TEST} -f "$$license_file"; then \ $$pager "$$license_file"; \ else \ ${ECHO} "Generic $$license information not available"; \ ${ECHO} "See the package description (pkg_info -d ${PKGNAME}) for more information."; \ fi .endif # This target is defined in bsd.options.mk for packages that use # the options framework. .if !target(show-options) .PHONY: show-options show-options: @${ECHO} This package does not use the options framework. .endif # Stat all the files of one pkg and sum the sizes up. # # XXX This is intended to be run before pkg_create is called, so the # existence of ${PLIST} can be assumed. .PHONY: print-pkg-size-this print-pkg-size-this: @${SHCOMMENT} "This pkg's files" ; \ ${AWK} 'BEGIN { base = "${PREFIX}/" } \ /^@cwd/ { base = $$2 "/" } \ /^@/ { next } \ { print base $$0 }' \ <${PLIST} \ | ${SORT} -u \ | ${SED} -e "s/'/'\\\\''/g" -e "s/.*/'&'/" \ | ${XARGS} -n 256 ${LS} -ld \ | ${AWK} 'BEGIN { s = 0; } { s += $$5; } END { print s; }' # Sizes of required pkgs (only) # # XXX This is intended to be run before pkg_create is called, so the # dependencies are all installed. .PHONY: print-pkg-size-depends print-pkg-size-depends: @pkglist=`${MAKE} ${MAKEFLAGS} run-depends-list`; \ if [ "X$${pkglist}" != "X" ]; then \ ${ECHO} $${pkglist} \ | ${XARGS} -n 1 ${SETENV} ${PKG_BEST_EXISTS} \ | ${SORT} -u \ | ${XARGS} -n 256 ${SETENV} ${PKG_INFO} -qs \ | ${AWK} '/^[0-9]+$$/ { s += $$1; } END { print s; }'; \ else \ ${ECHO} "0"; \ fi ### ### Automatic PLIST generation ### - files & symlinks first ### - @dirrm statements last ### - empty directories are handled properly ### - dirs from mtree files are excluded ### - substitute for platform or package specifics substrings ### ### Usage: ### - make install ### - make print-PLIST | brain >PLIST ### _PRINT_PLIST_AWK_SUBST={ \ gsub(/${OPSYS}/, "$${OPSYS}"); \ gsub(/${OS_VERSION:S/./\./g}/, "$${OS_VERSION}"); \ gsub(/${MACHINE_GNU_PLATFORM}/, "$${MACHINE_GNU_PLATFORM}"); \ gsub(/${MACHINE_ARCH}/, "$${MACHINE_ARCH}"); \ gsub(/${MACHINE_GNU_ARCH}/, "$${MACHINE_GNU_ARCH}"); .if !empty(LOWER_VENDOR) _PRINT_PLIST_AWK_SUBST+= gsub(/${LOWER_VENDOR}/, "$${LOWER_VENDOR}"); .endif _PRINT_PLIST_AWK_SUBST+= \ gsub(/${LOWER_OS_VERSION:S/./\./g}/, "$${LOWER_OS_VERSION}"); \ gsub(/${LOWER_OPSYS}/, "$${LOWER_OPSYS}"); \ gsub(/${PKGNAME_NOREV}/, "$${PKGNAME}"); \ gsub(/${PKGVERSION:S/./\./g:C/nb[0-9]*$$//}/, "$${PKGVERSION}");\ gsub(/${PKGLOCALEDIR}\/locale/, "$${PKGLOCALEDIR}/locale"); \ gsub("^${PKGMANDIR}\/", "man/"); \ } _PRINT_PLIST_AWK_IGNORE= ($$0 ~ /emul\/linux\/proc/) _PRINT_PLIST_AWK_IGNORE+= || ($$0 ~ /^info\/dir$$/) .if defined(INFO_DIR) && empty(INFO_DIR:Minfo) _PRINT_PLIST_AWK_IGNORE+= || ($$0 ~ /^${INFO_DIR:S|/|\\/|g}\/dir$$/) .endif .if !empty(INFO_FILES) . for _f_ in ${INFO_FILES} _PRINT_PLIST_AWK_IGNORE+= || ($$0 ~ /^${INFO_DIR:S|/|\\/|g}\/${_f_:S|+|\+|g}(-[0-9]+)?(\.gz)?$$/) . endfor .endif # Common (system) directories not to generate @dirrm statements for # Reads MTREE_FILE and generate awk statements that will # sort out which directories NOT to include into the PLIST @dirrm list .if make(print-PLIST) _PRINT_PLIST_COMMON_DIRS!= ${AWK} 'BEGIN { \ i=0; \ stack[i]="${PREFIX}" ; \ cwd=""; \ } \ ! ( /^\// || /^\#/ || /^$$/ ) { \ if ( $$1 == ".." ){ \ i=i-1; \ cwd = stack[i]; \ } else if ( $$1 == "." ){ \ } else { \ stack[i] = cwd ; \ if ( i == 0 ){ \ cwd = $$1 ; \ } else { \ cwd = cwd "\\/" $$1 ; \ } \ print "/^" cwd "$$$$/ { next; }"; \ i=i+1 ; \ } \ } \ END { print "{ print $$$$0; }"; } \ ' <${MTREE_FILE} .endif # scan $PREFIX for any files/dirs modified since the package was extracted # will emit "@exec mkdir"-statements for empty directories # XXX will fail for data files that were copied using tar (e.g. emacs)! # XXX should check $LOCALBASE and $X11BASE, and add @cwd statements _PRINT_PLIST_FILES_CMD= \ ${FIND} ${PREFIX}/. -xdev -newer ${_EXTRACT_COOKIE} \! -type d -print _PRINT_PLIST_DIRS_CMD= \ ${FIND} ${PREFIX}/. -xdev -newer ${_EXTRACT_COOKIE} -type d -print _PRINT_LA_LIBNAMES= ${SETENV} ECHO=${ECHO:Q} GREP=${GREP:Q} SORT=${SORT:Q} \ ${SH} ${.CURDIR}/../../mk/scripts/print-la-libnames .if !empty(LIBTOOLIZE_PLIST:M[yY][eE][sS]) _PRINT_PLIST_LIBTOOLIZE_FILTER?= \ ( \ if ${TEST} -d ${WRKDIR}; then \ tmpdir="${WRKDIR}"; \ else \ tmpdir="$${TMPDIR-/tmp}"; \ fi; \ fileslist="$$tmpdir/print.plist.files.$$$$"; \ libslist="$$tmpdir/print.plist.libs.$$$$"; \ while read file; do \ case $$file in \ *.la) \ ${_PRINT_LA_LIBNAMES} $$file >> $$libslist; \ ;; \ esac; \ ${ECHO} "$$file"; \ done > $$fileslist; \ if ${TEST} -f "$$libslist"; then \ ${GREP} -hvxF "`${SORT} -u $$libslist`" "$$fileslist"; \ else \ ${CAT} "$$fileslist"; \ fi; \ ${RM} -f "$$fileslist" "$$libslist"; \ ) .else _PRINT_PLIST_LIBTOOLIZE_FILTER?= ${CAT} .endif .PHONY: print-PLIST .if !target(print-PLIST) print-PLIST: ${_PKG_SILENT}${_PKG_DEBUG}\ ${ECHO} '@comment $$'NetBSD'$$' ${_PKG_SILENT}${_PKG_DEBUG}\ shlib_type=`${MAKE} ${MAKEFLAGS} show-shlib-type`; \ case $$shlib_type in \ "a.out") genlinks=1 ;; \ *) genlinks=0 ;; \ esac; \ ${_PRINT_PLIST_FILES_CMD} \ | ${_PRINT_PLIST_LIBTOOLIZE_FILTER} \ | ${SORT} \ | ${AWK} ' \ { sub("${PREFIX}/\\./", ""); } \ ${_PRINT_PLIST_AWK_IGNORE} { next; } \ ${_PRINT_PLIST_AWK_SUBST} \ /^@/ { print $$0; next } \ /.*\/lib[^\/]+\.so\.[0-9]+\.[0-9]+\.[0-9]+$$/ { \ print $$0; \ sub("\\.[0-9]+$$", ""); \ if ('$$genlinks') print $$0; \ sub("\\.[0-9]+$$", ""); \ if ('$$genlinks') print $$0; \ sub("\\.[0-9]+$$", ""); \ if ('$$genlinks') print $$0; \ next; \ } \ /.*\/lib[^\/]+\.so\.[0-9]+\.[0-9]+$$/ { \ print $$0; \ sub("\\.[0-9]+$$", ""); \ if ('$$genlinks') print $$0; \ sub("\\.[0-9]+$$", ""); \ if ('$$genlinks') print $$0; \ next; \ } \ ${PRINT_PLIST_AWK} \ { print $$0; }' ${_PKG_SILENT}${_PKG_DEBUG}\ for i in `${_PRINT_PLIST_DIRS_CMD} \ | ${SORT} -r \ | ${AWK} ' \ /emul\/linux\/proc/ { next; } \ /${PREFIX:S|/|\\/|g}\/\.$$/ { next; } \ { sub("${PREFIX}/\\\\./", ""); } \ { sub("^${PKGMANDIR}/", "man/"); } \ ${_PRINT_PLIST_COMMON_DIRS}'` ; \ do \ if [ `${LS} -la ${PREFIX}/$$i | ${WC} -l` = 3 ]; then \ ${ECHO} @exec \$${MKDIR} %D/$$i | ${AWK} ' \ ${PRINT_PLIST_AWK} \ { print $$0; }' ; \ fi ; \ ${ECHO} @dirrm $$i | ${AWK} ' \ ${PRINT_PLIST_AWK} \ { print $$0; }' ; \ done \ | ${AWK} '${_PRINT_PLIST_AWK_SUBST} { print $$0; }' .endif # target(print-PLIST) # By default, all packages attempt to link into the views. .if ${PKG_INSTALLATION_TYPE} == "pkgviews" BUILD_VIEWS?= yes .endif # DEFAULT_VIEW.${PKGBASE} default view for ${PKGBASE} # VIEWBASE base location of files at run-time # DEFAULT_VIEW.${PKGBASE}?= ${DEFAULT_VIEW} .if ${PKG_INSTALLATION_TYPE} == "pkgviews" . if empty(DEFAULT_VIEW.${PKGBASE}:M"") VIEWBASE= ${LOCALBASE}/${DEFAULT_VIEW.${PKGBASE}} . else VIEWBASE= ${LOCALBASE} . endif .elif ${PKG_INSTALLATION_TYPE} == "overwrite" VIEWBASE= ${PREFIX} .endif MAKE_ENV+= VIEWBASE=${VIEWBASE} PKGVIEWS+= ${DEFAULT_VIEW.${PKGBASE}} .PHONY: pre-install-fake-pkg .if !target(pre-install-fake-pkg) pre-install-fake-pkg: ${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${PRESERVE_FILE} . if defined(PKG_PRESERVE) ${_PKG_SILENT}${_PKG_DEBUG}${DATE} > ${PRESERVE_FILE} . endif ${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${BUILD_VERSION_FILE} ${_PKG_SILENT}${_PKG_DEBUG} \ files=""; \ for f in ${.CURDIR}/Makefile ${FILESDIR}/* ${PKGDIR}/*; do \ if [ -f "$$f" ]; then \ files="$$files \"$$f\""; \ fi; \ done; \ if [ -f ${DISTINFO_FILE} ]; then \ for f in `${AWK} 'NF == 4 && $$3 == "=" { gsub("[()]", "", $$2); print $$2 }' < ${DISTINFO_FILE}`; do \ if [ -f ${PATCHDIR}/$$f ]; then \ files="$$files \"${PATCHDIR}/$$f\""; \ fi; \ done; \ fi; \ if [ -d ${PATCHDIR} ]; then \ for f in ${PATCHDIR}/patch-*; do \ case $$f in \ *.orig|*.rej|*~) ;; \ ${PATCHDIR}/patch-local-*) \ files="$$files \"$$f\"" ;; \ esac; \ done; \ fi; \ eval ${GREP} '\$$NetBSD' $$files | ${SED} -e 's|^${PKGSRCDIR}/||' > ${BUILD_VERSION_FILE} ${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${BUILD_INFO_FILE} . for def in ${BUILD_DEFS} @${ECHO} ${def}=${${def}:Q} | ${SED} -e 's|^PATH=[^ ]*|PATH=...|' >> ${BUILD_INFO_FILE} . endfor . if !empty(USE_LANGUAGES) @${ECHO} "CC_VERSION=${CC_VERSION}" >> ${BUILD_INFO_FILE} . endif . if !empty(USE_TOOLS:Mperl\:run) @${ECHO} "PERL=`${PERL5} --version 2>/dev/null | ${GREP} 'This is perl'`" >> ${BUILD_INFO_FILE} . endif . if defined(_USE_GMAKE) || !empty(USE_TOOLS:Mgmake) @${ECHO} "GMAKE=`${GMAKE} --version | ${GREP} Make`" >> ${BUILD_INFO_FILE} . endif ${_PKG_SILENT}${_PKG_DEBUG} \ ${ECHO} "_PKGTOOLS_VER=${PKGTOOLS_VERSION}" >> ${BUILD_INFO_FILE} .endif .PHONY: post-install-fake-pkg .if !target(post-install-fake-pkg) post-install-fake-pkg: ${PLIST} ${DESCR} ${MESSAGE} ${_PKG_SILENT}${_PKG_DEBUG} \ if [ ! -f ${PLIST} -o ! -f ${DESCR} ]; then \ ${ECHO} "** Missing package files for ${PKGNAME} - installation not recorded."; \ exit 1; \ fi ${_PKG_SILENT}${_PKG_DEBUG} \ if [ ! -d ${_PKG_DBDIR} ]; then \ ${RM} -f ${_PKG_DBDIR}; \ ${MKDIR} ${_PKG_DBDIR}; \ fi . if defined(FORCE_PKG_REGISTER) ${_PKG_SILENT}${_PKG_DEBUG}${PKG_ADMIN} delete ${PKGNAME} . endif ${_PKG_SILENT}${_PKG_DEBUG} \ ${ECHO} ${COMMENT:Q} > ${PKG_DB_TMPDIR}/+COMMENT ${_PKG_SILENT}${_PKG_DEBUG} \ case "${DESCR}" in \ ${PKG_DB_TMPDIR}/*|"") ;; \ *) if ${TEST} -f ${DESCR}; then \ ${CP} ${DESCR} ${PKG_DB_TMPDIR}/+DESC; \ fi ;; \ esac ${_PKG_SILENT}${_PKG_DEBUG} \ case "${MESSAGE}" in \ ${PKG_DB_TMPDIR}/*|"") ;; \ *) if ${TEST} -f ${MESSAGE}; then \ ${CP} ${MESSAGE} ${PKG_DB_TMPDIR}/+DISPLAY; \ fi ;; \ esac ${_PKG_SILENT}${_PKG_DEBUG} \ case ${PKG_INSTALLATION_TYPE} in \ pkgview) ${TOUCH} ${PKG_DB_TMPDIR}/+VIEWS ;; \ esac ${_PKG_SILENT}${_PKG_DEBUG} \ case "${INSTALL_FILE}" in \ ${PKG_DB_TMPDIR}/*|"") ;; \ *) if ${TEST} -f ${INSTALL_FILE}; then \ ${CP} ${INSTALL_FILE} ${PKG_DB_TMPDIR}/+INSTALL; \ fi ;; \ esac ${_PKG_SILENT}${_PKG_DEBUG} \ case "${DEINSTALL_FILE}" in \ ${PKG_DB_TMPDIR}/*|"") ;; \ *) if ${TEST} -f ${DEINSTALL_FILE}; then \ ${CP} ${DEINSTALL_FILE} ${PKG_DB_TMPDIR}/+DEINSTALL; \ fi ;; \ esac ${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${SIZE_PKG_FILE} ${SIZE_ALL_FILE} . if ${SHLIB_HANDLING} == "YES" && ${CHECK_SHLIBS} == "YES" ${_PKG_SILENT}${_PKG_DEBUG} \ case "${LDD}" in \ "") ldd=`${TYPE} ldd 2>/dev/null | ${AWK} '{ print $$NF }'`;; \ *) ldd="${LDD}"; \ esac; \ case "${OBJECT_FMT}" in \ ELF) bins=`${SETENV} PREFIX=${PREFIX} ${AWK} '/^(bin|sbin|libexec)\// { print ENVIRON["PREFIX"] "/" $$0 }' ${PLIST} || ${TRUE}`; \ libs=`${SETENV} PREFIX=${PREFIX} ${AWK} '/^lib\/lib.*\.so\.[0-9]+$$/ { print ENVIRON["PREFIX"] "/" $$0 }' ${PLIST} || ${TRUE}`; \ if ${TEST} "$$bins" != "" -o "$$libs" != ""; then \ requires=`($$ldd $$bins $$libs 2>/dev/null || ${TRUE}) | ${AWK} 'NF == 3 { print $$3 }' | ${SORT} -u`; \ fi; \ linklibs=`${SETENV} PREFIX=${PREFIX} ${AWK} '/^[^@].*\.so\.[0-9\.]+$$/ { print ENVIRON["PREFIX"] "/" $$0 }' ${PLIST} || ${TRUE}`; \ for i in $${linklibs}; do \ if ${TEST} -r $$i -a ! -x $$i -a ! -h $$i; then \ ${TEST} "${PKG_DEVELOPER:Uno}" = "no" || \ ${ECHO} "$$i: installed without execute permission; fixing (should use [BSD_]INSTALL_LIB)"; \ ${CHMOD} +x $$i; \ fi; \ done; \ ;; \ Mach-O) bins=`${SETENV} PREFIX=${PREFIX} ${AWK} '/^(bin|sbin|libexec)\// { print ENVIRON["PREFIX"] "/" $$0 }' ${PLIST} || ${TRUE}`; \ libs=`${SETENV} PREFIX=${PREFIX} ${AWK} '/^lib\/lib.*\.dylib/ { print ENVIRON["PREFIX"] "/" $$0 }' ${PLIST} || ${TRUE}`; \ if ${TEST} "$$bins" != "" -o "$$libs" != ""; then \ requires=`($$ldd $$bins $$libs 2>/dev/null || ${TRUE}) | ${AWK} '/compatibility version/ { print $$1 }' | ${SORT} -u`; \ fi; \ ;; \ esac; \ for i in "" $$libs; do \ ${TEST} "$$i" = "" && continue; \ ${ECHO} "PROVIDES=$$i" >> ${BUILD_INFO_FILE}; \ done; \ for req in "" $$requires; do \ ${TEST} "$$req" = "" && continue; \ ${ECHO} "REQUIRES=$$req" >> ${BUILD_INFO_FILE}; \ done . endif ${_PKG_SILENT}${_PKG_DEBUG} \ size_this=`${MAKE} ${MAKEFLAGS} print-pkg-size-this`; \ size_depends=`${MAKE} ${MAKEFLAGS} print-pkg-size-depends`; \ ${ECHO} $$size_this >${SIZE_PKG_FILE}; \ ${ECHO} $$size_this $$size_depends \ | ${AWK} '{ print $$1 + $$2; }' >${SIZE_ALL_FILE} .endif # Fake installation of package so that user can pkg_delete it later. # Also, make sure that an installed package is recognized correctly in # accordance to the @pkgdep directive in the packing lists. # .PHONY: register-pkg .if !target(register-pkg) register-pkg: post-install-fake-pkg ${_PKG_SILENT}${_PKG_DEBUG} \ doit=yes; \ case ${PKG_INSTALLATION_TYPE} in \ overwrite) if [ -d ${_PKG_DBDIR}/${PKGNAME} ]; then \ doit=no; \ fi ;; \ esac; \ case $$doit in \ yes) \ ${ECHO_MSG} "${_PKGSRC_IN}> Registering installation for ${PKGNAME}"; \ ${PKG_CREATE} ${PKG_ARGS_INSTALL} -O ${PKGFILE} > ${PKG_DB_TMPDIR}/+CONTENTS; \ list="`${MAKE} ${MAKEFLAGS} run-depends-list ECHO_MSG=${TRUE} | ${SORT} -u`" ; \ for realdep in `${ECHO} $$list | ${XARGS} -n 1 ${SETENV} ${PKG_BEST_EXISTS} | ${SORT} -u`; do \ if ${TEST} -z "$$realdep"; then \ ${ECHO} "$$dep not installed - dependency NOT registered" ; \ elif [ -d ${_PKG_DBDIR}/$$realdep ]; then \ if ${TEST} ! -f ${_PKG_DBDIR}/$$realdep/+REQUIRED_BY; then \ ${TOUCH} ${_PKG_DBDIR}/$$realdep/+REQUIRED_BY; \ fi; \ ${AWK} 'BEGIN { found = 0; } \ $$0 == "${PKGNAME}" { found = 1; } \ { print $$0; } \ END { if (!found) { printf("%s\n", "${PKGNAME}"); }}' \ < ${_PKG_DBDIR}/$$realdep/+REQUIRED_BY > ${_PKG_DBDIR}/$$realdep/reqby.$$$$; \ ${MV} ${_PKG_DBDIR}/$$realdep/reqby.$$$$ ${_PKG_DBDIR}/$$realdep/+REQUIRED_BY; \ ${ECHO} "${PKGNAME} requires installed package $$realdep"; \ fi; \ done; \ case ${PKG_INSTALLATION_TYPE} in \ overwrite) ${RM} -rf ${_PKG_DBDIR}/${PKGNAME} ;; \ esac; \ ${MKDIR} ${_PKG_DBDIR}/${PKGNAME}; \ ${CP} ${PKG_DB_TMPDIR}/+* ${_PKG_DBDIR}/${PKGNAME}; \ if [ "${_AUTOMATIC}" = "YES" ]; then \ ${PKG_ADMIN} set automatic=yes ${PKGNAME}; \ fi; \ ;; \ esac . if (${PKG_INSTALLATION_TYPE} == "pkgviews") && \ !empty(BUILD_VIEWS:M[yY][eE][sS]) ${_PKG_SILENT}${_PKG_DEBUG}${MAKE} ${MAKEFLAGS} build-views . endif # pkgviews .endif .PHONY: build-views build-views: do-su-build-views .PHONY: do-su-build-views do-su-build-views: @${ECHO_MSG} "${_PKGSRC_IN}> Building views for ${PKGNAME}" ${_PKG_SILENT}${_PKG_DEBUG} \ realtarget="real-su-build-views"; \ action="build-views"; \ ${_SU_TARGET} .PHONY: real-su-build-views .if !target(real-su-build-views) real-su-build-views: . if (${PKG_INSTALLATION_TYPE} == "pkgviews") && defined(PKGVIEWS) ${_PKG_SILENT}${_PKG_DEBUG} \ ${MKDIR} ${LOCALBASE}; \ for v in ${PKGVIEWS}; do \ case "$$v" in \ "") dbdir=${PKG_DBDIR}; viewname=standard ;; \ *) dbdir=${LOCALBASE}/$$v/.dbdir; viewname=$$v ;; \ esac; \ ${ECHO} "=> Performing package view clash check for ${PKGNAME} in $$viewname view"; \ pkg=`${PKG_INFO_CMD} -K $$dbdir -e ${PKGBASE} || ${TRUE}`; \ case "$$pkg" in \ "") ;; \ *) ${ECHO} "*** ${PKGBASE} exists in $$viewname view - package $$pkg ***"; \ ${ECHO} "*** Not hoisting ${PKGNAME} into $$viewname view"; \ continue ;; \ esac; \ ${ECHO} "=> Performing package view overwrite check for ${PKGNAME} in $$viewname view"; \ dups=`${SETENV} PLIST_IGNORE_FILES=${_PLIST_IGNORE_FILES:Q} ${PKG_VIEW} --view=$$v check ${PKGNAME} || ${TRUE}`; \ case "$$dups" in \ "") ;; \ *) ${ECHO} "***********************************************************"; \ ${ECHO} "**** The following symbolic links will be overwritten *****"; \ for f in $$dups; do \ ${LS} -l ${LOCALBASE}/$$v/$$f; \ done; \ ${ECHO} "***********************************************************"; \ ;; \ esac; \ ${ECHO} "=> Linking package into $$viewname view"; \ ${SETENV} PLIST_IGNORE_FILES=${_PLIST_IGNORE_FILES:Q} ${PKG_VIEW} --view=$$v add ${PKGNAME}; \ done . else ${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA} . endif .endif .PHONY: remove-views remove-views: do-su-remove-views .PHONY: do-su-remove-views do-su-remove-views: @${ECHO_MSG} "${_PKGSRC_IN}> Removing ${PKGNAME} from views" ${_PKG_SILENT}${_PKG_DEBUG} \ realtarget="real-su-remove-views"; \ action="remove-views"; \ ${_SU_TARGET} .PHONY: real-su-remove-views .if !target(real-su-remove-views) real-su-remove-views: . if (${PKG_INSTALLATION_TYPE} == "pkgviews") && defined(PKGVIEWS) ${_PKG_SILENT}${_PKG_DEBUG} \ for v in ${PKGVIEWS}; do \ case "$$v" in \ "") dbdir=${PKG_DBDIR}; viewname=standard ;; \ *) dbdir=${LOCALBASE}/$$v/.dbdir; viewname=$$v ;; \ esac; \ ${ECHO} "=> Removing package from $$viewname view"; \ ${SETENV} PLIST_IGNORE_FILES=${_PLIST_IGNORE_FILES:Q} ${PKG_VIEW} --view=$$v delete ${PKGNAME}; \ done .else ${_PKG_SILENT}${_PKG_DEBUG}${DO_NADA} . endif .endif # Depend is generally meaningless for arbitrary packages, but if someone wants # one they can override this. This is just to catch people who've gotten into # the habit of typing `${MAKE} depend all install' as a matter of course. # .PHONY: depend .if !target(depend) depend: .endif # Same goes for tags .PHONY: tags .if !target(tags) tags: .endif # generate ${PLIST} from ${PLIST_SRC} by: # - substituting for PLIST_SUBST entries # - fixing list of man-pages according to PKGMANDIR, MANZ, MANINSTALL. # - adding symlinks for shared libs (ELF) or ldconfig calls (a.out). # plist awk pattern-action statement to convert man/ to ${PKGMANDIR}/ _PLIST_AWK_PKGMANDIR= \ /^([^\/]*\/)*man\/([^\/]*\/)?(man[1-9ln]\/.*[1-9ln]|cat[1-9ln]\/.*[0-9])$$/ { \ sub("^man/", "${PKGMANDIR}/"); \ } \ /^@dirrm man\// { \ sub(" man/", " ${PKGMANDIR}/"); \ } # plist awk pattern-action statement to handle MANINSTALL _PLIST_AWK_MANINSTALL= \ { \ if (!"${MANINSTALL:Mmaninstall}" && \ match($$0, "^([^/]*/)*man/([^/]*/)?man[1-9ln]") ) { \ next; \ } \ if (!"${MANINSTALL:Mcatinstall}" && \ match($$0, "^([^/]*/)*man/([^/]*/)?cat[1-9ln]") ) { \ next; \ } \ } # plist awk pattern-action statement to strip '.gz' from man # entries _PLIST_AWK_STRIP_MANZ= \ /^([^\/]*\/)*man\/([^\/]*\/)?(man[1-9ln]\/.*[1-9ln]|cat[1-9ln]\/.*[0-9])\.gz$$/ { \ $$0 = substr($$0, 1, length($$0) - 3); \ } # plist awk pattern-action statement to add '.gz' to man entries _PLIST_AWK_ADD_MANZ= \ /^([^\/]*\/)*man\/([^\/]*\/)?(man[1-9ln]\/.*[1-9ln]|cat[1-9ln]\/.*[0-9])$$/ { \ $$0 = $$0 ".gz"; \ } # plist awk pattern-action statement to handle PLIST_SUBST substitutions # BEWARE: the awk script quote is closed and reopened around the # string argument of gsub() calls so historic quoting semantic of # PLIST_SUBST is preserved. # XXX `_str_quote_{start,end}_' is a gross hack to work around weird word # splitting. _PLIST_AWK_SUBST= { ${PLIST_SUBST:S|=|\\}/,_str_quote_start_|:S|$|_str_quote_end_);|:S|^|gsub(/\\\$\\{|:S|_str_quote_start_|"'|g:S|_str_quote_end_|'"|g} } # plist awk pattern-action statement to rewrite "imake installed" catman pages # as plain manpages. _PLIST_AWK_IMAKE_MAN= \ /^([^\/]*\/)*man\/([^\/]*\/)?cat[1-9ln]\/.*0$$/ { \ n = match($$0, "/cat[1-9ln]"); \ sect = sprintf(".%s", substr($$0, n + 4, 1)); \ sub("/cat", "/man"); \ sub("\\.0$$", sect); \ } # plist awk pattern-action statement to handle info files: # generate list of files matching # ${PREFIX}/${INFO_DIR}/filename(-[0-9]+)?(.gz)? # for `filename' being each word of INFO_FILES in turn. # Notes: # - first the filenames matching ${PREFIX}/${INFO_DIR}/filename* # are generated with ls then they are filtered by the exact pattern. # - ${PREFIX}/${INFO_DIR}/filename is single quoted and single quote # escaped # XXX When all info file entries will be removed from PLIST files # the non-BEGIN pattern-action statements generated below will be retired. _PLIST_AWK_INFO= .if ${PLIST_TYPE} == "static" . if !empty(INFO_FILES) . for _f_ in ${INFO_FILES} _PLIST_AWK_INFO+= \ BEGIN { \ cmd="${_f_}"; gsub("'\''", "\\'\''", cmd); \ sub("^", "${LS} '\''${PREFIX}/${INFO_DIR}/", cmd); \ sub("$$", "'\''*", cmd); \ while ((cmd | getline l) > 0) { \ if (match(l, ".*/${_f_:S|+|\\\+|g}(-[0-9]+)?(\\.gz)?$$")) { \ sub("^${PREFIX}/", "", l); \ print l; \ } \ } \ close(cmd); \ } \ /^${INFO_DIR:S|/|\\/|g}\/${_f_}(-[0-9]+)?$$/ { next; } . endfor . endif .endif # plist awk pattern-action statement to expand libtool archives into # shared and/or static libraries. # .if ${PLIST_TYPE} == "dynamic" _PLIST_AWK_LIBTOOL?= # empty .elif empty(LIBTOOLIZE_PLIST:M[yY][eE][sS]) BROKEN+= "USE_LIBTOOL requires LIBTOOLIZE_PLIST=yes for proper PLIST generation" .else _PLIST_AWK_LIBTOOL?= \ /^[^@].*\.la$$/ { \ system("cd ${PREFIX} && ${_PRINT_LA_LIBNAMES} " $$0) \ } .endif # _PLIST_AWK_SCRIPT hold the complete awk script for plist target. # _PLIST_AWK_SCRIPT= ' # Do the substitutions # See comments above about _PLIST_AWK_SUBST: it contains single quotes! # So _PLIST_AWK_SCRIPT is intended to be single quoted. _PLIST_AWK_SCRIPT+= ${_PLIST_AWK_SUBST} # Generated entries for info files .if !empty(INFO_FILES) _PLIST_AWK_SCRIPT+= ${_PLIST_AWK_INFO} .endif # Change path to man directory if using custom PKGMANDIR _PLIST_AWK_SCRIPT+= ${_PLIST_AWK_PKGMANDIR} # Expand libtool archives _PLIST_AWK_SCRIPT+= ${_PLIST_AWK_LIBTOOL} # Strip the '.gz' suffixes on man entries _PLIST_AWK_SCRIPT+= ${_PLIST_AWK_STRIP_MANZ} # Deal with MANINSTALL and man entries _PLIST_AWK_SCRIPT+= ${_PLIST_AWK_MANINSTALL} # Deal with "imake installed" catman pages .if (defined(USE_IMAKE) || !empty(USE_TOOLS:Mimake)) && ${_PREFORMATTED_MAN_DIR} == "man" _PLIST_AWK_SCRIPT+= ${_PLIST_AWK_IMAKE_MAN} .endif # Add '.gz' suffixes on man entries if needed .if !empty(_MANZ:M[yY][eE][sS]) _PLIST_AWK_SCRIPT+= ${_PLIST_AWK_ADD_MANZ} .endif # Print the entry _PLIST_AWK_SCRIPT+= { print $$0; } # _PLIST_AWK_SCRIPT+= ' # GENERATE_PLIST is a sequence of commands, terminating in a semicolon, # that outputs contents for a PLIST to stdout and is appended to # the contents of ${PLIST_SRC}. # GENERATE_PLIST?= ${TRUE}; .if ${PLIST_TYPE} == "dynamic" _PLIST_IGNORE_CMD= \ ( while read i; do \ ignore=no; \ for p in ${_PLIST_IGNORE_FILES}; do \ case "$$i" in \ $$p) ignore=yes; break ;; \ esac; \ done; \ [ "$$ignore" = "yes" ] || ${ECHO} "$$i"; \ done ) _GENERATE_PLIST= \ ${FIND} ${PREFIX} \! -type d -print | ${SORT} | \ ${SED} -e "s|^${PREFIX}/||" | \ ${_PLIST_IGNORE_CMD}; \ ${FIND} ${PREFIX} -type d -print | ${SORT} -r | \ ${GREP} -v "^${PREFIX}$$" | \ ${_PLIST_IGNORE_CMD} | \ ${SED} -e "s|^${PREFIX}/|@unexec ${RMDIR} -p %D/|" \ -e "s,$$, 2>/dev/null || ${TRUE},"; .else _GENERATE_PLIST= ${CAT} ${PLIST_SRC}; ${GENERATE_PLIST} .endif .PHONY: plist plist: ${PLIST} .if ${PLIST_TYPE} == "static" ${PLIST}: ${PLIST_SRC} .endif ${PLIST}: ${_PKG_SILENT}${_PKG_DEBUG} \ { ${_GENERATE_PLIST} } | ${AWK} ${_PLIST_AWK_SCRIPT} \ > ${PLIST}; \ ${MAKE} ${MAKEFLAGS} do-shlib-handling \ SHLIB_PLIST_MODE=1 # generate ${MESSAGE} from ${MESSAGE_SRC} by substituting # for MESSAGE_SUBST entries .PHONY: message message: ${MESSAGE} .if defined(MESSAGE) ${MESSAGE}: ${MESSAGE_SRC} ${_PKG_SILENT}${_PKG_DEBUG} \ if [ -z "${MESSAGE_SRC}" ]; then \ ${ECHO} "${MESSAGE_SRC} not found."; \ ${ECHO} "Please set MESSAGE_SRC correctly."; \ else \ ${CAT} ${MESSAGE_SRC} | \ ${SED} ${MESSAGE_SUBST_SED} \ > ${MESSAGE}; \ fi .endif # generate ${DESCR} from ${DESCR_SRC} by: # - Appending the homepage URL, if any .PHONY: descr descr: ${DESCR} ${DESCR}: ${DESCR_SRC} @${CAT} ${DESCR_SRC} >${DESCR} .if defined(HOMEPAGE) @\ ${ECHO} >>${DESCR} ; \ ${ECHO} "Homepage:" >>${DESCR} ; \ ${ECHO} '${HOMEPAGE}' >>${DESCR} .endif .include "../../mk/subst.mk" # # For bulk build targets (bulk-install, bulk-package), the # BATCH variable must be set in /etc/mk.conf: # .if defined(BATCH) . include "../../mk/bulk/bsd.bulk-pkg.mk" .endif # Create a PKG_ERROR_HANDLER shell command for each class listed in # PKG_ERROR_CLASSES. The error handler is meant to be invoked within # a make target. # .for _class_ in ${PKG_ERROR_CLASSES} PKG_ERROR_HANDLER.${_class_}?= { \ ec=$$?; \ for str in ${PKG_ERROR_MSG.${_class_}}; do \ ${ECHO} "${_PKGSRC_IN}> $$str"; \ done; \ exit $$ec; \ } .endfor # Cache variables listed in MAKEVARS in a phase-specific "makevars.mk" # file. These variables are effectively passed to sub-make processes # that are invoked on the same Makefile. # .for _phase_ in ${ALL_PHASES} ${_MAKEVARS_MK.${_phase_}}: ${WRKDIR} . if !empty(PKG_PHASE:M${_phase_}) ${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${.TARGET}.tmp . for _var_ in ${MAKEVARS:O:u} . if defined(${_var_}) ${_PKG_SILENT}${_PKG_DEBUG} \ ${ECHO} ${_var_}"= "${${_var_}:Q} >> ${.TARGET}.tmp . endif . endfor ${_PKG_SILENT}${_PKG_DEBUG} \ if ${TEST} -f ${.TARGET}.tmp; then \ ( ${ECHO} ".if !defined(_MAKEVARS_MK)"; \ ${ECHO} "_MAKEVARS_MK= defined"; \ ${ECHO} ""; \ ${CAT} ${.TARGET}.tmp; \ ${ECHO} ""; \ ${ECHO} ".endif # _MAKEVARS_MK"; \ ) > ${.TARGET}; \ ${RM} -f ${.TARGET}.tmp; \ fi . endif ${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${.TARGET} .endfor .undef _phase_ # show-tools emits a /bin/sh shell script that defines all known tools # to the values they have in the pkgsrc infrastructure. # # Don't move this code away from here unless you know what you're doing. # .PHONY: show-tools show-tools: .for _t_ in ${_USE_TOOLS} . if defined(_TOOLS_VARNAME.${_t_}) @${ECHO} ${_TOOLS_VARNAME.${_t_}:Q}=${${_TOOLS_VARNAME.${_t_}}:Q:Q} . endif .endfor # changes-entry appends a correctly-formatted entry to the pkgsrc # CHANGES file. # # The following variables may be set: # # CTYPE is the type of entry to add and is one of "Added", "Updated", # "Renamed", "Moved", of "Removed". The default CTYPE is "Updated". # # NETBSD_LOGIN_NAME is the login name assigned by the NetBSD Project. # It defaults to the local login name. # # PKGSRC_CHANGES is the path to the CHANGES file to which the entry # is appended. It defaults to ${PKGSRCDIR}/doc/CHANGES. # # Example usage: # # % cd /usr/pkgsrc/category/package # % make changes-entry CTYPE=Added # CTYPE?= Updated NETBSD_LOGIN_NAME?= ${_NETBSD_LOGIN_NAME_cmd:sh} PKGSRC_CHANGES?= ${PKGSRCDIR}/doc/CHANGES _CDATE_cmd= ${DATE} -u +%Y-%m-%d _NETBSD_LOGIN_NAME_cmd= ${ID} -nu _CTYPE1= " "${CTYPE:Q}" "${PKGPATH:Q} .if !empty(CTYPE:MUpdated) _CTYPE2= " to "${PKGVERSION:Q} .elif !empty(CTYPE:MAdded) _CTYPE2= " version "${PKGVERSION:Q} .elif !empty(CTYPE:MRenamed) || !empty(CTYPE:MMoved) _CTYPE2= " to XXX" .else _CTYPE2= .endif _CTYPE3= " ["${NETBSD_LOGIN_NAME:Q}" "${_CDATE_cmd:sh:Q}"]" .PHONY: changes-entry changes-entry: ${_PKG_SILENT}${_PKG_DEBUG} \ ${ECHO} ${_CTYPE1}${_CTYPE2}${_CTYPE3} >> ${PKGSRC_CHANGES:Q}