# $NetBSD: bsd.pkg.mk,v 1.1851 2006/06/12 16:30:03 jlam Exp $ # # This file is in the public domain. # # This file is derived from bsd.port.mk - 940820 Jordan K. Hubbard. # # Please see the pkgsrc/doc/guide manual for details on the # variables used in this make file template. # # Default sequence for "all" is: fetch checksum extract patch configure build # # Please read the comments in the targets section below, you # should be able to use the pre-* or post-* targets/scripts # (which are available for every stage except checksum) or # override the do-* targets to do pretty much anything you want. ############################################################################ # Include any preferences, if not already included, and common definitions ############################################################################ .include "../../mk/bsd.prefs.mk" .include "${PKGSRCDIR}/mk/flavor/bsd.flavor-vars.mk" .include "${PKGSRCDIR}/mk/check/bsd.check-vars.mk" .include "${PKGSRCDIR}/mk/depends/bsd.depends-vars.mk" .include "${PKGSRCDIR}/mk/fetch/bsd.fetch-vars.mk" .include "${PKGSRCDIR}/mk/extract/bsd.extract-vars.mk" .include "${PKGSRCDIR}/mk/patch/bsd.patch-vars.mk" .include "${PKGSRCDIR}/mk/install/bsd.install-vars.mk" .include "${PKGSRCDIR}/mk/bsd.pkg.error.mk" .include "../../mk/bsd.hacks.mk" # This has to come first to avoid showing all BUILD_DEFS added by this # Makefile, which are usually not customizable. .PHONY: build-defs-message pre-depends-hook: build-defs-message .if empty(PKGSRC_SHOW_BUILD_DEFS:M[yY][eE][sS]) build-defs-message: .elif !target(build-defs-message) build-defs-message: ${WRKDIR} . if defined(BUILD_DEFS) && !empty(BUILD_DEFS) . if !exists(${WRKDIR}/.bdm_done) @${ECHO} "==========================================================================" @${ECHO} "The following variables will affect the build process of this package," @${ECHO} "${PKGNAME}. Their current value is shown below:" @${ECHO} "" . for var in ${BUILD_DEFS:O} . if !defined(${var}) @${ECHO} " * ${var} (not defined)" . elif defined(${var}) && empty(${var}) @${ECHO} " * ${var} (defined)" . else @${ECHO} " * ${var} = ${${var}}" . endif . endfor @${ECHO} "" @${ECHO} "You may want to abort the process now with CTRL-C and change their value" @${ECHO} "before continuing. Be sure to run \`${MAKE} clean' after" @${ECHO} "the changes." @${ECHO} "==========================================================================" @${TOUCH} ${WRKDIR}/.bdm_done . endif . endif .endif ############################################################################ # Transform package Makefile variables and set defaults ############################################################################ MKCRYPTO?= YES # build crypto packages by default ##### Variant spellings .if defined(LICENCE) && !defined(LICENSE) LICENSE= ${LICENCE} .endif .if defined(ACCEPTABLE_LICENCES) && !defined(ACCEPTABLE_LICENSES) ACCEPTABLE_LICENSES= ${ACCEPTABLE_LICENCES} .endif ##### PKGBASE, PKGNAME[_NOREV], PKGVERSION PKGBASE?= ${PKGNAME:C/-[^-]*$//} PKGVERSION?= ${PKGNAME:C/^.*-//} .if defined(PKGREVISION) && !empty(PKGREVISION) && (${PKGREVISION} != "0") . if defined(PKGNAME) PKGNAME_NOREV:= ${PKGNAME} PKGNAME:= ${PKGNAME}nb${PKGREVISION} . else PKGNAME?= ${DISTNAME}nb${PKGREVISION} PKGNAME_NOREV= ${DISTNAME} . endif .else PKGNAME?= ${DISTNAME} PKGNAME_NOREV= ${PKGNAME} .endif ##### Others BUILD_DEPENDS?= # empty BUILD_TARGET?= all COMMENT?= (no description) CONFIGURE_DIRS?= ${WRKSRC} CONFIGURE_SCRIPT?= ./configure DEPENDS?= # empty DESCR_SRC?= ${PKGDIR}/DESCR DIGEST_ALGORITHMS?= SHA1 RMD160 DISTINFO_FILE?= ${PKGDIR}/distinfo INTERACTIVE_STAGE?= none MAINTAINER?= pkgsrc-users@NetBSD.org MAKE_FLAGS?= # empty MAKEFILE?= Makefile PATCH_DIGEST_ALGORITHM?=SHA1 PKGWILDCARD?= ${PKGBASE}-[0-9]* SVR4_PKGNAME?= ${PKGNAME} USE_DIGEST?= YES WRKSRC?= ${WRKDIR}/${DISTNAME} .if (defined(INSTALL_UNSTRIPPED) && !empty(INSTALL_UNSTRIPPED:M[yY][eE][sS])) || defined(DEBUG_FLAGS) _INSTALL_UNSTRIPPED= # set (flag used by platform/*.mk) .endif ##### Non-overridable constants # Latest versions of tools required for correct pkgsrc operation. DIGEST_REQD= 20010302 PKGTOOLS_REQD= ${_OPSYS_PKGTOOLS_REQD:U20051103} ##### Transform USE_* into dependencies .include "../../mk/bsd.pkg.use.mk" ############################################################################ # Sanity checks ############################################################################ # Fail-safe in the case of circular dependencies .if defined(_PKGSRC_DEPS) && defined(PKGNAME) && !empty(_PKGSRC_DEPS:M${PKGNAME}) PKG_FAIL_REASON+= "Circular dependency detected" .endif # PKG_INSTALLATION_TYPE can only be one of two values: "pkgviews" or # "overwrite". .if (${PKG_INSTALLATION_TYPE} != "pkgviews") && \ (${PKG_INSTALLATION_TYPE} != "overwrite") PKG_FAIL_REASON+= "PKG_INSTALLATION_TYPE must be \`\`pkgviews'' or \`\`overwrite''." .endif .if empty(PKG_INSTALLATION_TYPES:M${PKG_INSTALLATION_TYPE}) PKG_FAIL_REASON+= "This package doesn't support PKG_INSTALLATION_TYPE=${PKG_INSTALLATION_TYPE}." .endif # Check that we are using up-to-date pkg_* tools with this file. .if !defined(NO_PKGTOOLS_REQD_CHECK) . if ${PKGTOOLS_VERSION} < ${PKGTOOLS_REQD} PKG_FAIL_REASON+='Error: The package tools installed on this system are out of date.' PKG_FAIL_REASON+='The installed package tools are dated ${PKGTOOLS_VERSION:C|(....)(..)(..)|\1/\2/\3|} and you must update' PKG_FAIL_REASON+='them to at least ${PKGTOOLS_REQD:C|(....)(..)(..)|\1/\2/\3|} using the following command:' PKG_FAIL_REASON+='' PKG_FAIL_REASON+=' (cd ${PKGSRCDIR}/pkgtools/pkg_install && ${MAKE} clean && ${MAKE} update)' . endif .endif # !NO_PKGTOOLS_REQD_CHECK .if defined(ALL_TARGET) PKG_FAIL_REASON+='ALL_TARGET is deprecated and must be replaced with BUILD_TARGET.' .endif .if defined(NO_WRKSUBDIR) PKG_FAIL_REASON+='NO_WRKSUBDIR has been deprecated - please replace it with an explicit' PKG_FAIL_REASON+='assignment of WRKSRC= $${WRKDIR}' .endif # NO_WRKSUBDIR # We need to make sure the buildlink-x11 package is not installed since it # breaks builds that use imake. .if defined(USE_IMAKE) . if exists(${LOCALBASE}/lib/X11/config/buildlinkX11.def) || \ exists(${X11BASE}/lib/X11/config/buildlinkX11.def) PKG_FAIL_REASON+= "${PKGNAME} uses imake, but the buildlink-x11 package was found." \ " Please deinstall it (pkg_delete buildlink-x11)." . endif .endif # USE_IMAKE .if !defined(CATEGORIES) || !defined(DISTNAME) PKG_FAIL_REASON+='CATEGORIES and DISTNAME are mandatory.' .endif .if defined(LIB_DEPENDS) PKG_FAIL_REASON+='LIB_DEPENDS is deprecated and must be replaced with DEPENDS.' .endif .if defined(PKG_PATH) PKG_FAIL_REASON+='Please unset PKG_PATH before doing pkgsrc work!' .endif .if defined(MASTER_SITE_SUBDIR) PKG_FAIL_REASON+='MASTER_SITE_SUBDIR is deprecated and must be replaced with MASTER_SITES.' .endif .if defined(PATCH_SITE_SUBDIR) PKG_FAIL_REASON+='PATCH_SITE_SUBDIR is deprecated and must be replaced with PATCH_SITES.' .endif .if defined(ONLY_FOR_ARCHS) || defined(NOT_FOR_ARCHS) \ || defined(ONLY_FOR_OPSYS) || defined(NOT_FOR_OPSYS) PKG_FAIL_REASON+='ONLY/NOT_FOR_ARCHS/OPSYS are deprecated and must be replaced with ONLY/NOT_FOR_PLATFORM.' .endif # Allow variables to be set on a per-OS basis OPSYSVARS+= CFLAGS CXXFLAGS CPPFLAGS LDFLAGS LIBS .for _var_ in ${OPSYSVARS:O} . if defined(${_var_}.${OPSYS}) ${_var_}+= ${${_var_}.${OPSYS}} . elif defined(${_var_}.*) ${_var_}+= ${${_var_}.*} . endif .endfor CPPFLAGS+= ${CPP_PRECOMP_FLAGS} ALL_ENV+= CC=${CC:Q} ALL_ENV+= CFLAGS=${CFLAGS:M*:Q} ALL_ENV+= CPPFLAGS=${CPPFLAGS:M*:Q} ALL_ENV+= CXX=${CXX:M*:Q} ALL_ENV+= CXXFLAGS=${CXXFLAGS:M*:Q} ALL_ENV+= COMPILER_RPATH_FLAG=${COMPILER_RPATH_FLAG:Q} ALL_ENV+= F77=${FC:Q} ALL_ENV+= FC=${FC:Q} ALL_ENV+= FFLAGS=${FFLAGS:M*:Q} ALL_ENV+= LANG=C ALL_ENV+= LC_COLLATE=C ALL_ENV+= LC_CTYPE=C ALL_ENV+= LC_MESSAGES=C ALL_ENV+= LC_MONETARY=C ALL_ENV+= LC_NUMERIC=C ALL_ENV+= LC_TIME=C ALL_ENV+= LDFLAGS=${LDFLAGS:M*:Q} ALL_ENV+= LINKER_RPATH_FLAG=${LINKER_RPATH_FLAG:Q} ALL_ENV+= PATH=${PATH:Q}:${LOCALBASE}/bin:${X11BASE}/bin ALL_ENV+= PREFIX=${PREFIX} MAKE_ENV+= ${ALL_ENV} MAKE_ENV+= ${NO_EXPORT_CPP:D:UCPP=${CPP:Q}} MAKE_ENV+= LINK_ALL_LIBGCC_HACK=${LINK_ALL_LIBGCC_HACK:Q} MAKE_ENV+= LOCALBASE=${LOCALBASE:Q} MAKE_ENV+= NO_WHOLE_ARCHIVE_FLAG=${NO_WHOLE_ARCHIVE_FLAG:Q} MAKE_ENV+= WHOLE_ARCHIVE_FLAG=${WHOLE_ARCHIVE_FLAG:Q} MAKE_ENV+= X11BASE=${X11BASE:Q} MAKE_ENV+= X11PREFIX=${X11PREFIX:Q} MAKE_ENV+= PKGMANDIR=${PKGMANDIR:Q} # Constants to provide a consistent environment for packages using # BSD-style Makefiles. MAKE_ENV+= MAKECONF=${PKGMAKECONF:U/dev/null} MAKE_ENV+= OBJECT_FMT=${OBJECT_FMT:Q} MAKE_ENV+= ${USETOOLS:DUSETOOLS=${USETOOLS:Q}} SCRIPTS_ENV+= ${ALL_ENV} SCRIPTS_ENV+= _PKGSRCDIR=${_PKGSRCDIR} SCRIPTS_ENV+= ${BATCH:DBATCH=yes} SCRIPTS_ENV+= CURDIR=${.CURDIR} SCRIPTS_ENV+= DEPENDS=${DEPENDS:Q} SCRIPTS_ENV+= DISTDIR=${DISTDIR} SCRIPTS_ENV+= FILESDIR=${FILESDIR} SCRIPTS_ENV+= LOCALBASE=${LOCALBASE} SCRIPTS_ENV+= PATCHDIR=${PATCHDIR} SCRIPTS_ENV+= PKGSRCDIR=${PKGSRCDIR} SCRIPTS_ENV+= SCRIPTDIR=${SCRIPTDIR} SCRIPTS_ENV+= VIEWBASE=${VIEWBASE} SCRIPTS_ENV+= WRKDIR=${WRKDIR} SCRIPTS_ENV+= WRKSRC=${WRKSRC} SCRIPTS_ENV+= X11BASE=${X11BASE} CONFIGURE_ENV+= ${ALL_ENV} # Store the result in the +BUILD_INFO file so we can query for the build # options using "pkg_info -Q PKG_OPTIONS ". # .if defined(PKG_SUPPORTED_OPTIONS) && defined(PKG_OPTIONS) BUILD_DEFS+= PKG_OPTIONS .endif .if empty(DEPOT_SUBDIR) PKG_FAIL_REASON+= "DEPOT_SUBDIR may not be empty." .endif # ZERO_FILESIZE_P exits with a successful return code if the given file # has zero length. # NONZERO_FILESIZE_P exits with a successful return code if the given file # has nonzero length. # _ZERO_FILESIZE_P= ${AWK} 'END { exit (NR > 0) ? 1 : 0; }' _NONZERO_FILESIZE_P= ${AWK} 'END { exit (NR > 0) ? 0 : 1; }' # Automatically increase process limit where necessary for building. _ULIMIT_CMD= ${UNLIMIT_RESOURCES:@_lim_@${ULIMIT_CMD_${_lim_}};@} # If GNU_CONFIGURE is defined, then pass LIBS to the GNU configure script. # also pass in a CONFIG_SHELL to avoid picking up bash .if defined(GNU_CONFIGURE) CONFIG_SHELL?= ${SH} CONFIGURE_ENV+= CONFIG_SHELL=${CONFIG_SHELL:Q} CONFIGURE_ENV+= LIBS=${LIBS:M*:Q} CONFIGURE_ENV+= install_sh=${INSTALL:Q} . if (defined(USE_LIBTOOL) || !empty(PKGDIR:M*/libtool-base)) && defined(_OPSYS_MAX_CMDLEN_CMD) CONFIGURE_ENV+= lt_cv_sys_max_cmd_len=${_OPSYS_MAX_CMDLEN_CMD:sh} . endif .endif _WRAPPER_COOKIE= ${WRKDIR}/.wrapper_done _CONFIGURE_COOKIE= ${WRKDIR}/.configure_done _BUILD_COOKIE= ${WRKDIR}/.build_done _TEST_COOKIE= ${WRKDIR}/.test_done _INTERACTIVE_COOKIE= ${.CURDIR}/.interactive_stage _NULL_COOKIE= ${WRKDIR}/.null # Miscellaneous overridable commands: SHCOMMENT?= ${ECHO_MSG} >/dev/null '***' LIBABISUFFIX?= TOUCH_FLAGS?= -f # Debugging levels for this file, dependent on PKG_DEBUG_LEVEL definition # 0 == normal, default, quiet operation # 1 == all shell commands echoed before invocation # 2 == shell "set -x" operation PKG_DEBUG_LEVEL?= 0 _PKG_SILENT= @ _PKG_DEBUG= # empty _PKG_DEBUG_SCRIPT= # empty .if ${PKG_DEBUG_LEVEL} > 0 _PKG_SILENT= # empty .endif .if ${PKG_DEBUG_LEVEL} > 1 _PKG_DEBUG= set -x; _PKG_DEBUG_SCRIPT= ${SH} -x .endif # A few aliases for *-install targets INSTALL= ${TOOLS_INSTALL} # XXX override sys.mk INSTALL_PROGRAM?= \ ${INSTALL} ${COPY} ${_STRIPFLAG_INSTALL} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE} INSTALL_GAME?= \ ${INSTALL} ${COPY} ${_STRIPFLAG_INSTALL} -o ${GAMEOWN} -g ${GAMEGRP} -m ${GAMEMODE} INSTALL_SCRIPT?= \ ${INSTALL} ${COPY} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE} INSTALL_LIB?= \ ${INSTALL} ${COPY} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE} INSTALL_DATA?= \ ${INSTALL} ${COPY} -o ${SHAREOWN} -g ${SHAREGRP} -m ${SHAREMODE} INSTALL_GAME_DATA?= \ ${INSTALL} ${COPY} -o ${GAMEOWN} -g ${GAMEGRP} -m ${GAMEDATAMODE} INSTALL_MAN?= \ ${INSTALL} ${COPY} -o ${MANOWN} -g ${MANGRP} -m ${MANMODE} INSTALL_PROGRAM_DIR?= \ ${INSTALL} -d -o ${BINOWN} -g ${BINGRP} -m ${PKGDIRMODE} INSTALL_GAME_DIR?= \ ${INSTALL} -d -o ${GAMEOWN} -g ${GAMEGRP} -m ${GAMEDIRMODE} INSTALL_SCRIPT_DIR?= \ ${INSTALL_PROGRAM_DIR} INSTALL_LIB_DIR?= \ ${INSTALL_PROGRAM_DIR} INSTALL_DATA_DIR?= \ ${INSTALL} -d -o ${SHAREOWN} -g ${SHAREGRP} -m ${PKGDIRMODE} INSTALL_MAN_DIR?= \ ${INSTALL} -d -o ${MANOWN} -g ${MANGRP} -m ${PKGDIRMODE} INSTALL_MACROS= BSD_INSTALL_PROGRAM=${INSTALL_PROGRAM:Q} \ BSD_INSTALL_SCRIPT=${INSTALL_SCRIPT:Q} \ BSD_INSTALL_LIB=${INSTALL_LIB:Q} \ BSD_INSTALL_DATA=${INSTALL_DATA:Q} \ BSD_INSTALL_MAN=${INSTALL_MAN:Q} \ BSD_INSTALL=${INSTALL:Q} \ BSD_INSTALL_PROGRAM_DIR=${INSTALL_PROGRAM_DIR:Q} \ BSD_INSTALL_SCRIPT_DIR=${INSTALL_SCRIPT_DIR:Q} \ BSD_INSTALL_LIB_DIR=${INSTALL_LIB_DIR:Q} \ BSD_INSTALL_DATA_DIR=${INSTALL_DATA_DIR:Q} \ BSD_INSTALL_MAN_DIR=${INSTALL_MAN_DIR:Q} \ BSD_INSTALL_GAME=${INSTALL_GAME:Q} \ BSD_INSTALL_GAME_DATA=${INSTALL_GAME_DATA:Q} \ BSD_INSTALL_GAME_DIR=${INSTALL_GAME_DIR:Q} MAKE_ENV+= ${INSTALL_MACROS} SCRIPTS_ENV+= ${INSTALL_MACROS} # If pkgsrc is supposed to ensure that tests are run before installation # of the package, then the build targets should be "build test", otherwise # just "build" suffices. # .if !empty(PKGSRC_RUN_TEST:M[yY][eE][sS]) _PKGSRC_BUILD_TARGETS= build test .else _PKGSRC_BUILD_TARGETS= build .endif # The user can override the NO_PACKAGE by specifying this from # the make command line .if defined(FORCE_PACKAGE) . undef NO_PACKAGE .endif # Handle alternatives # .include "../../mk/alternatives.mk" # INSTALL/DEINSTALL script framework .include "../../mk/pkginstall/bsd.pkginstall.mk" .PHONY: uptodate-digest uptodate-digest: .if !empty(USE_DIGEST:M[yY][eE][sS]) ${_PKG_SILENT}${_PKG_DEBUG} \ if [ -f ${DISTINFO_FILE} -a \( ! -f ${DIGEST} -o ${DIGEST_VERSION} -lt ${DIGEST_REQD} \) ]; then \ { cd ${PKGSRCDIR}/pkgtools/digest; \ ${MAKE} clean; \ if [ -f ${DIGEST} ]; then \ ${MAKE} ${MAKEFLAGS} deinstall; \ fi; \ ${MAKE} ${MAKEFLAGS} ${_PKGSRC_BUILD_TARGETS}; \ if [ -f ${DIGEST} ]; then \ ${MAKE} ${MAKEFLAGS} deinstall; \ fi; \ ${MAKE} ${MAKEFLAGS} ${DEPENDS_TARGET}; \ ${MAKE} ${MAKEFLAGS} clean; } \ fi .else @${DO_NADA} .endif # Define SMART_MESSAGES in /etc/mk.conf for messages giving the tree # of dependencies for building, and the current target. _PKGSRC_IN?= ===${SMART_MESSAGES:D> ${.TARGET} [${PKGNAME}${_PKGSRC_DEPS}] ===} # Used to print all the '===>' style prompts - override this to turn them off. ECHO_MSG?= ${ECHO} PHASE_MSG?= ${ECHO_MSG} ${_PKGSRC_IN:Q}\> STEP_MSG?= ${ECHO_MSG} "=>" WARNING_MSG?= ${ECHO_MSG} 1>&2 "WARNING:" ERROR_MSG?= ${ECHO_MSG} 1>&2 "ERROR:" WARNING_CAT?= ${SED} -e "s|^|WARNING: |" 1>&2 ERROR_CAT?= ${SED} -e "s|^|ERROR: |" 1>&2 # How to do nothing. Override if you, for some strange reason, would rather # do something. DO_NADA?= ${TRUE} .if defined(GNU_CONFIGURE) HAS_CONFIGURE= yes GNU_CONFIGURE_PREFIX?= ${PREFIX} CONFIGURE_ARGS+= --prefix=${GNU_CONFIGURE_PREFIX:Q} USE_GNU_CONFIGURE_HOST?= yes . if !empty(USE_GNU_CONFIGURE_HOST:M[yY][eE][sS]) CONFIGURE_ARGS+= --host=${MACHINE_GNU_PLATFORM:Q} . endif # Support for alternative info directories in packages is very sketchy. # For now, if we configure a package to install entirely into a # subdirectory of ${PREFIX}, then root the info directory directly under # that subdirectory. # CONFIGURE_HAS_INFODIR?= yes .if ${GNU_CONFIGURE_PREFIX} == ${PREFIX} GNU_CONFIGURE_INFODIR?= ${GNU_CONFIGURE_PREFIX}/${PKGINFODIR} .else GNU_CONFIGURE_INFODIR?= ${GNU_CONFIGURE_PREFIX}/info .endif . if defined(INFO_FILES) && !empty(CONFIGURE_HAS_INFODIR:M[yY][eE][sS]) CONFIGURE_ARGS+= --infodir=${GNU_CONFIGURE_INFODIR:Q} . endif CONFIGURE_HAS_MANDIR?= yes GNU_CONFIGURE_MANDIR?= ${GNU_CONFIGURE_PREFIX}/${PKGMANDIR} . if !empty(CONFIGURE_HAS_MANDIR:M[yY][eE][sS]) CONFIGURE_ARGS+= --mandir=${GNU_CONFIGURE_MANDIR:Q} . endif # # By default, override config.guess and config.sub for GNU configure # packages. pkgsrc's updated versions of these scripts allows GNU # configure to recognise NetBSD ports such as shark. # CONFIG_GUESS_OVERRIDE?= \ config.guess */config.guess */*/config.guess CONFIG_SUB_OVERRIDE?= \ config.sub */config.sub */*/config.sub CONFIG_RPATH_OVERRIDE?= # set by platform file as needed # # By default, override GNU configure scripts so that the generated # config.status scripts never do anything on "recheck". # CONFIGURE_SCRIPTS_OVERRIDE?= \ configure */configure */*/configure .endif # # Config file related settings - see doc/pkgsrc.txt # PKG_SYSCONFVAR?= ${PKGBASE} PKG_SYSCONFSUBDIR?= # empty .if ${PKG_INSTALLATION_TYPE} == "overwrite" PKG_SYSCONFDEPOTBASE= # empty PKG_SYSCONFBASEDIR= ${PKG_SYSCONFBASE} .else . if !empty(PKG_SYSCONFBASE:M${PREFIX}) || \ !empty(PKG_SYSCONFBASE:M${PREFIX}/*) PKG_SYSCONFDEPOTBASE= # empty PKG_SYSCONFBASEDIR= ${PKG_SYSCONFBASE} . else PKG_SYSCONFDEPOTBASE= ${PKG_SYSCONFBASE}/${DEPOT_SUBDIR} PKG_SYSCONFBASEDIR= ${PKG_SYSCONFDEPOTBASE}/${PKGNAME} . endif .endif .if empty(PKG_SYSCONFSUBDIR) DFLT_PKG_SYSCONFDIR:= ${PKG_SYSCONFBASEDIR} .else DFLT_PKG_SYSCONFDIR:= ${PKG_SYSCONFBASEDIR}/${PKG_SYSCONFSUBDIR} .endif PKG_SYSCONFDIR= ${DFLT_PKG_SYSCONFDIR} .if defined(PKG_SYSCONFDIR.${PKG_SYSCONFVAR}) PKG_SYSCONFDIR= ${PKG_SYSCONFDIR.${PKG_SYSCONFVAR}} PKG_SYSCONFBASEDIR= ${PKG_SYSCONFDIR.${PKG_SYSCONFVAR}} PKG_SYSCONFDEPOTBASE= # empty .endif PKG_SYSCONFDIR_PERMS?= ${ROOT_USER} ${ROOT_GROUP} 755 ALL_ENV+= PKG_SYSCONFDIR=${PKG_SYSCONFDIR:Q} BUILD_DEFS+= PKG_SYSCONFBASEDIR PKG_SYSCONFDIR # These are all of the tools use by pkgsrc Makefiles. This should # eventually be split up into lists of tools required by different # phases of a pkgsrc build. # USE_TOOLS+= \ [ awk basename cat chgrp chmod chown cmp cp cut dirname echo \ egrep env false file find grep head hostname id install ln ls \ mkdir mv pax pwd rm rmdir sed sh sort tail test touch tr true \ wc xargs # bsd.wrapper.mk USE_TOOLS+= expr # bsd.bulk-pkg.mk uses certain tools .if defined(BATCH) USE_TOOLS+= tee tsort .endif # We need shlock and sleep if we're using locking to synchronize multiple # builds over the same pkgsrc tree. # .if ${PKGSRC_LOCKTYPE} != "none" USE_TOOLS+= shlock sleep .endif # Tools .include "../../mk/tools/bsd.tools.mk" # Unprivileged builds .include "../../mk/unprivileged.mk" # If NO_BUILD is defined, default to not needing a compiler. .if defined(NO_BUILD) USE_LANGUAGES?= # empty .endif # Get the proper dependencies and set the PATH to use the compiler # named in PKGSRC_COMPILER. # .include "../../mk/compiler.mk" .include "../../mk/wrapper/bsd.wrapper.mk" .if defined(ABI_DEPENDS) || defined(BUILD_ABI_DEPENDS) . if !empty(USE_ABI_DEPENDS:M[yY][eE][sS]) DEPENDS+= ${ABI_DEPENDS} BUILD_DEPENDS+= ${BUILD_ABI_DEPENDS} . else BUILD_DEFS+= USE_ABI_DEPENDS . endif .endif # Find out the PREFIX of dependencies where the PREFIX is needed at build time. .if defined(EVAL_PREFIX) FIND_PREFIX:= ${EVAL_PREFIX} . include "../../mk/find-prefix.mk" .endif .if !defined(_PATH_ORIG) _PATH_ORIG:= ${PATH} MAKEFLAGS+= _PATH_ORIG=${_PATH_ORIG:Q} .endif .if !empty(PREPEND_PATH:M*) # This is very Special. Because PREPEND_PATH is set with += in reverse order, # this command reverses the order again (since bootstrap bmake doesn't # yet support the :[-1..1] construct). _PATH_CMD= \ path=${_PATH_ORIG:Q}; \ for i in ${PREPEND_PATH}; do path="$$i:$$path"; done; \ ${ECHO} "$$path" PATH= ${_PATH_CMD:sh} # DOES NOT use :=, to defer evaluation .endif # Add these bits to the environment use when invoking the sub-make # processes for build-related phases. # BUILD_ENV+= PATH=${PATH:Q} .MAIN: all ################################################################ # Many ways to disable a package. # # Ignore packages that can't be resold if building for a CDROM. # # Don't build a package if it's restricted and we don't want to # get into that. # # Don't build any package that utilizes strong cryptography, for # when the law of the land forbids it. # # Don't attempt to build packages against X if we don't have X. # # Don't build a package if it's broken. ################################################################ .if !defined(NO_SKIP) . if (defined(NO_BIN_ON_CDROM) && defined(FOR_CDROM)) PKG_FAIL_REASON+= "${PKGNAME} may not be placed in binary form on a CDROM:" \ " "${NO_BIN_ON_CDROM:Q} . endif . if (defined(NO_SRC_ON_CDROM) && defined(FOR_CDROM)) PKG_FAIL_REASON+= "${PKGNAME} may not be placed in source form on a CDROM:" \ " "${NO_SRC_ON_CDROM:Q} . endif . if (defined(RESTRICTED) && defined(NO_RESTRICTED)) PKG_FAIL_REASON+= "${PKGNAME} is restricted:" \ " "${RESTRICTED:Q} . endif . if !(${MKCRYPTO} == "YES" || ${MKCRYPTO} == yes) . if defined(CRYPTO) PKG_FAIL_REASON+= "${PKGNAME} may not be built, because it utilizes strong cryptography" . endif . endif . if defined(USE_X11) && !exists(${X11BASE}) . if ${X11_TYPE} == "native" PKG_FAIL_REASON+= "${PKGNAME} uses X11, but ${X11BASE} not found" . else ${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${X11BASE} ${_PKG_SILENT}${_PKG_DEBUG}${CHOWN} ${ROOT_USER}:${ROOT_GROUP} ${X11BASE} ${_PKG_SILENT}${_PKG_DEBUG}${CHMOD} ${PKGDIRMODE} ${X11BASE} . endif . endif . if defined(BROKEN) PKG_FAIL_REASON+= "${PKGNAME} is marked as broken:" ${BROKEN:Q} . endif . if defined(LICENSE) . if defined(ACCEPTABLE_LICENSES) && !empty(ACCEPTABLE_LICENSES:M${LICENSE}) _ACCEPTABLE= yes . endif # ACCEPTABLE_LICENSES . if !defined(_ACCEPTABLE) PKG_FAIL_REASON+= "${PKGNAME} has an unacceptable license: ${LICENSE}." \ " To view the license, enter \"${MAKE} show-license\"." \ " To indicate acceptance, add this line to your /etc/mk.conf:" \ " ACCEPTABLE_LICENSES+=${LICENSE}" . endif # _ACCEPTABLE . endif # LICENSE # Define __PLATFORM_OK only if the OS matches the pkg's allowed list. . if defined(ONLY_FOR_PLATFORM) && !empty(ONLY_FOR_PLATFORM) . for __tmp__ in ${ONLY_FOR_PLATFORM} . if ${MACHINE_PLATFORM:M${__tmp__}} != "" __PLATFORM_OK?= yes . endif # MACHINE_PLATFORM . endfor # __tmp__ . else # !ONLY_FOR_PLATFORM __PLATFORM_OK?= yes . endif # ONLY_FOR_PLATFORM . for __tmp__ in ${NOT_FOR_PLATFORM} . if ${MACHINE_PLATFORM:M${__tmp__}} != "" . undef __PLATFORM_OK . endif # MACHINE_PLATFORM . endfor # __tmp__ . if !defined(__PLATFORM_OK) PKG_SKIP_REASON+= "${PKGNAME} is not available for ${MACHINE_PLATFORM}" . endif # !__PLATFORM_OK # # Now print some error messages that we know we should ignore the pkg # . if defined(PKG_FAIL_REASON) || defined(PKG_SKIP_REASON) .PHONY: do-check-pkg-fail-or-skip-reason fetch checksum extract patch configure all build install package \ update depends do-check-pkg-fail-or-skip-reason: . if defined(SKIP_SILENT) @${DO_NADA} . else @for str in ${PKG_FAIL_REASON} ${PKG_SKIP_REASON}; do \ ${PHASE_MSG} "$$str"; \ done . endif . if defined(PKG_FAIL_REASON) @${FALSE} . endif . endif # SKIP .endif # !NO_SKIP .PHONY: do-check-pkg-fail-reason do-check-pkg-fail-reason: @${DO_NADA} # This target should appear as a dependency of every top level target that # is intended to be called by the user or by a package different from the # current package. .if defined(PKG_FAIL_REASON) do-check-pkg-fail-reason: do-check-pkg-fail-or-skip-reason .endif # Add these defs to the ones dumped into +BUILD_DEFS BUILD_DEFS+= PKGPATH BUILD_DEFS+= OPSYS OS_VERSION MACHINE_ARCH MACHINE_GNU_ARCH BUILD_DEFS+= CPPFLAGS CFLAGS FFLAGS LDFLAGS BUILD_DEFS+= CONFIGURE_ENV CONFIGURE_ARGS BUILD_DEFS+= OBJECT_FMT LICENSE RESTRICTED BUILD_DEFS+= NO_SRC_ON_FTP NO_SRC_ON_CDROM BUILD_DEFS+= NO_BIN_ON_FTP NO_BIN_ON_CDROM .if defined(OSVERSION_SPECIFIC) BUILD_DEFS+= OSVERSION_SPECIFIC .endif # OSVERSION_SPECIFIC .PHONY: all .if !target(all) all: ${_PKGSRC_BUILD_TARGETS} .endif ################################################################ # The following are used to create easy dummy targets for # disabling some bit of default target behavior you don't want. # They still check to see if the target exists, and if so don't # do anything, since you might want to set this globally for a # group of packages in a Makefile.inc, but still be able to # override from an individual Makefile. ################################################################ # Disable checksum .PHONY: checksum .if (defined(NO_CHECKSUM) || exists(${_EXTRACT_COOKIE})) && !target(checksum) checksum: fetch @${DO_NADA} .endif # Disable wrapper .PHONY: wrapper .if defined(NO_BUILD) && !target(wrapper) wrapper: patch ${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${_WRAPPER_COOKIE} .endif # Disable configure .PHONY: configure .if defined(NO_CONFIGURE) && !target(configure) configure: wrapper ${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${_CONFIGURE_COOKIE} .endif # Disable build .PHONY: build .if defined(NO_BUILD) _build: configure ${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${_BUILD_COOKIE} .endif ################################################################ # More standard targets start here. # # These are the body of the build/install framework. If you are # not happy with the default actions, and you can't solve it by # adding pre-* or post-* targets/scripts, override these. ################################################################ # acquire-lock, release-lock are .USE macro targets for acquiring and # release coarse-grained locks. # _LOCKFILE= ${WRKDIR}/.lockfile acquire-lock: .USE .if ${PKGSRC_LOCKTYPE} == "none" @${DO_NADA} .else @if ${TEST} ! -x ${SHLOCK:Q}""; then \ ${ERROR_MSG} "The ${SHLOCK:Q} utility does not exist, and is necessary for locking."; \ ${ERROR_MSG} "Please \""${MAKE:Q}" install\" in ../../pkgtools/shlock."; \ exit 1; \ fi . if !defined(OBJHOSTNAME) @${ERROR_MSG} "PKGSRC_LOCKTYPE needs OBJHOSTNAME defined."; \ exit 1 . endif ${_PKG_SILENT}${_PKG_DEBUG}set -e; \ ppid=`${PS} -p $$$$ -o ppid | ${AWK} 'NR == 2 { print $$1 }'`; \ if ${TEST} -z "$$ppid"; then \ ${ERROR_MSG} "No parent process ID found."; \ exit 1; \ fi; \ while ${TRUE}; do \ if ${TEST} -f /var/run/dmesg.boot -a -f ${_LOCKFILE}; then \ rebooted=`${FIND} /var/run/dmesg.boot -newer ${_LOCKFILE} -print`; \ if ${TEST} -n "$$rebooted"; then \ ${STEP_MSG} "Removing stale ${_LOCKFILE}"; \ ${RM} -f ${_LOCKFILE}; \ fi; \ fi; \ ${MKDIR} ${_LOCKFILE:H}; \ if ${SHLOCK} -f ${_LOCKFILE} -p $$ppid; then \ break; \ fi; \ case ${PKGSRC_LOCKTYPE:Q}"" in \ once) ${ERROR_MSG} "Lock is held by pid `${CAT} ${_LOCKFILE}`"; \ exit 1; \ ;; \ sleep) ${STEP_MSG} "Lock is held by pid `${CAT} ${_LOCKFILE}`"; \ ${SLEEP} ${PKGSRC_SLEEPSECS}; \ ;; \ esac; \ done . if defined(PKG_VERBOSE) @${STEP_MSG} "Lock acquired for ${.TARGET:S/^acquire-//:S/-lock$//} on behalf of process `${CAT} ${_LOCKFILE}`" . endif .endif release-lock: .USE .if ${PKGSRC_LOCKTYPE} == "none" @${DO_NADA} .else . if defined(PKG_VERBOSE) @${STEP_MSG} "Lock released for ${.TARGET:S/^release-//:S/-lock$//} on behalf of process `${CAT} ${_LOCKFILE}`" . endif ${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${_LOCKFILE} .endif .PHONY: makedirs makedirs: ${WRKDIR} ${WRKDIR}: .if !defined(KEEP_WRKDIR) . if ${PKGSRC_LOCKTYPE} == "sleep" || ${PKGSRC_LOCKTYPE} == "once" ${_PKG_SILENT}${_PKG_DEBUG} \ ${TEST} -f ${_LOCKFILE} || ${RM} -fr ${WRKDIR} . endif .endif ${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${WRKDIR} # Create a symlink from ${WRKDIR} to the package directory if # CREATE_WRKDIR_SYMLINK is "yes". # CREATE_WRKDIR_SYMLINK?= yes .if defined(WRKOBJDIR) && !empty(CREATE_WRKDIR_SYMLINK:M[Yy][Ee][Ss]) makedirs: ${.CURDIR}/${WRKDIR_BASENAME} ${.CURDIR}/${WRKDIR_BASENAME}: . if ${PKGSRC_LOCKTYPE} == "sleep" || ${PKGSRC_LOCKTYPE} == "once" ${_PKG_SILENT}${_PKG_DEBUG} \ ${TEST} -f ${_LOCKFILE} || ${RM} -f ${.TARGET} . endif ${_PKG_SILENT}${_PKG_DEBUG} \ if ${LN} -s ${WRKDIR} ${.TARGET} 2>/dev/null; then \ ${ECHO} "${.TARGET:T} -> ${WRKDIR}"; \ fi .endif # Configure # _CONFIGURE_PREREQ is a list of targets to run after pre-configure but before # do-configure. These targets typically edit the files used by the # do-configure target. The targets are run as dependencies of # pre-configure-override. # # _CONFIGURE_POSTREQ is a list of targets to run after do-configure but before # post-configure. These targets typically edit the files generated by # the do-configure target that are used during the build phase. .if defined(USE_PKGLOCALEDIR) _PKGLOCALEDIR= ${PREFIX}/${PKGLOCALEDIR}/locale REPLACE_LOCALEDIR_PATTERNS?= # empty _REPLACE_LOCALEDIR_PATTERNS= ${REPLACE_LOCALEDIR_PATTERNS} . if defined(HAS_CONFIGURE) || defined(GNU_CONFIGURE) _REPLACE_LOCALEDIR_PATTERNS+= [Mm]akefile.in* . else _REPLACE_LOCALEDIR_PATTERNS+= [Mm]akefile* . endif _REPLACE_LOCALEDIR_PATTERNS_FIND_cmd= \ cd ${WRKSRC} && \ ${ECHO} "__dummy-entry__" && \ ${FIND} . \( ${_REPLACE_LOCALEDIR_PATTERNS:C/.*/-o -name "&"/g:S/-o//1} \) -print \ | ${SED} -e 's|^\./||' \ | ${SORT} -u REPLACE_LOCALEDIR?= # empty _REPLACE_LOCALEDIR= \ ${REPLACE_LOCALEDIR} \ ${_REPLACE_LOCALEDIR_PATTERNS_FIND_cmd:sh:N__dummy-entry__:N*.orig} _CONFIGURE_PREREQ+= subst-pkglocaledir . if empty(USE_PKGLOCALEDIR:M[nN][oO]) SUBST_CLASSES+= pkglocaledir . endif SUBST_MESSAGE.pkglocaledir= Fixing locale directory references. SUBST_FILES.pkglocaledir= ${_REPLACE_LOCALEDIR} SUBST_SED.pkglocaledir= \ -e 's|^\(localedir[ :]*=\).*|\1 ${_PKGLOCALEDIR}|' \ -e 's|^\(gnulocaledir[ :]*=\).*|\1 ${_PKGLOCALEDIR}|' \ -e 's|\(-DLOCALEDIR[ ]*=\)[^ ]*\(\.\*\)|\1"\\"${_PKGLOCALEDIR}\\""\2|' .endif .if defined(REPLACE_PERL) REPLACE_INTERPRETER+= perl REPLACE.perl.old= .*/bin/perl REPLACE.perl.new= ${PERL5} REPLACE_FILES.perl= ${REPLACE_PERL} .endif .if defined(REPLACE_INTERPRETER) # After 2006Q2, all instances of _REPLACE.* and _REPLACE_FILES.* should # have been replaced with REPLACE.* and REPLACE_FILES.*. This code is # then no longer needed. . for _lang_ in ${REPLACE_INTERPRETER} REPLACE.${_lang_}.old?= ${_REPLACE.${_lang_}.old} REPLACE.${_lang_}.new?= ${_REPLACE.${_lang_}.new} REPLACE_FILES.${_lang_}?= ${_REPLACE_FILES.${_lang_}} . endfor _CONFIGURE_PREREQ+= replace-interpreter .PHONY: replace-interpreter replace-interpreter: . for lang in ${REPLACE_INTERPRETER} . for pattern in ${REPLACE_FILES.${lang}} ${_PKG_SILENT}${_PKG_DEBUG} \ cd ${WRKSRC}; \ for f in ${pattern}; do \ if [ -f $${f} ]; then \ ${SED} -e '1s|^#!${REPLACE.${lang}.old}|#!${REPLACE.${lang}.new}|' \ $${f} > $${f}.new; \ if [ -x $${f} ]; then \ ${CHMOD} a+x $${f}.new; \ fi; \ ${MV} -f $${f}.new $${f}; \ else \ ${ECHO_MSG} "[bsd.pkg.mk:replace-interpreter] WARNING: Skipping non-existent file \"$$f\"." 1>&2; \ fi; \ done . endfor . endfor .endif .if defined(USE_LIBTOOL) && defined(LTCONFIG_OVERRIDE) _CONFIGURE_PREREQ+= do-ltconfig-override .PHONY: do-ltconfig-override do-ltconfig-override: . for ltconfig in ${LTCONFIG_OVERRIDE} ${_PKG_SILENT}${_PKG_DEBUG} \ if [ -f ${ltconfig} ]; then \ ${RM} -f ${ltconfig}; \ ${ECHO} "${RM} -f libtool; ${LN} -s ${_LIBTOOL} libtool" \ > ${ltconfig}; \ ${CHMOD} +x ${ltconfig}; \ fi . endfor .endif _CONFIGURE_PREREQ+= do-config-star-override .PHONY: do-config-star-override do-config-star-override: .if defined(GNU_CONFIGURE) . if !empty(CONFIG_GUESS_OVERRIDE) . for _pattern_ in ${CONFIG_GUESS_OVERRIDE} ${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC}; \ for file in ${_pattern_}; do \ if [ -f "$$file" ]; then \ ${RM} -f $$file; \ ${LN} -s ${PKGSRCDIR}/mk/gnu-config/config.guess \ $$file; \ fi; \ done . endfor . endif . if !empty(CONFIG_SUB_OVERRIDE) . for _pattern_ in ${CONFIG_SUB_OVERRIDE} ${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC}; \ for file in ${_pattern_}; do \ if [ -f "$$file" ]; then \ ${RM} -f $$file; \ ${LN} -s ${PKGSRCDIR}/mk/gnu-config/config.sub \ $$file; \ fi; \ done . endfor . endif . if !empty(CONFIG_RPATH_OVERRIDE) . for _pattern_ in ${CONFIG_RPATH_OVERRIDE} ${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC}; \ for file in ${_pattern_}; do \ if [ -f "$$file" ]; then \ ${RM} -f $$file; \ ${LN} -s ${PKGSRCDIR}/mk/gnu-config/config.rpath \ $$file; \ fi; \ done . endfor . endif .endif .if defined(CONFIGURE_SCRIPTS_OVERRIDE) _CONFIGURE_PREREQ+= do-configure-scripts-override .PHONY: do-configure-scripts-override do-configure-scripts-override: . for _pattern_ in ${CONFIGURE_SCRIPTS_OVERRIDE} ${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC}; \ for file in ${_pattern_}; do \ if ${TEST} -f "$$file"; then \ ${AWK} '/ *-recheck *\| *--recheck.*\)/ { \ print; \ print " # Avoid regenerating for rechecks on pkgsrc"; \ print " exit 0"; \ next; \ } \ { print }' $$file > $$file.override && \ ${CHMOD} +x $$file.override && \ ${MV} -f $$file.override $$file; \ fi; \ done . endfor .endif PKGCONFIG_OVERRIDE_SED= \ '/^Libs:.*[ ]/s|-L\([ ]*[^ ]*\)|${COMPILER_RPATH_FLAG}\1 -L\1|g' PKGCONFIG_OVERRIDE_STAGE?= pre-configure .if defined(PKGCONFIG_OVERRIDE) && !empty(PKGCONFIG_OVERRIDE) . if ${PKGCONFIG_OVERRIDE_STAGE} == "pre-configure" _CONFIGURE_PREREQ+= subst-pkgconfig . elif ${PKGCONFIG_OVERRIDE_STAGE} == "post-configure" _CONFIGURE_POSTREQ+= subst-pkgconfig . else SUBST_STAGE.pkgconfig= ${PKGCONFIG_OVERRIDE_STAGE} . endif SUBST_CLASSES+= pkgconfig SUBST_MESSAGE.pkgconfig= Adding rpaths to pkgconfig files. SUBST_FILES.pkgconfig= ${PKGCONFIG_OVERRIDE:S/^${WRKSRC}\///} SUBST_SED.pkgconfig= ${PKGCONFIG_OVERRIDE_SED} .endif # By adding this target, it makes sure the above PREREQ's work. .PHONY: pre-configure-override pre-configure-override: ${_CONFIGURE_PREREQ} @${DO_NADA} .PHONY: do-configure .if !target(do-configure) do-configure: . if defined(HAS_CONFIGURE) . for _dir_ in ${CONFIGURE_DIRS} ${_PKG_SILENT}${_PKG_DEBUG}${_ULIMIT_CMD} \ cd ${WRKSRC} && cd ${_dir_} && \ ${SETENV} \ AWK=${TOOLS_AWK:Q} \ INSTALL=${INSTALL:Q}\ -c\ -o\ ${BINOWN}\ -g\ ${BINGRP} \ ac_given_INSTALL=${INSTALL:Q}\ -c\ -o\ ${BINOWN}\ -g\ ${BINGRP} \ INSTALL_DATA=${INSTALL_DATA:Q} \ INSTALL_PROGRAM=${INSTALL_PROGRAM:Q} \ INSTALL_GAME=${INSTALL_GAME:Q} \ INSTALL_GAME_DATA=${INSTALL_GAME_DATA:Q} \ INSTALL_SCRIPT=${INSTALL_SCRIPT:Q} \ ${CONFIGURE_ENV} ${CONFIG_SHELL} \ ${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS} . endfor . endif . if defined(USE_IMAKE) . for _dir_ in ${CONFIGURE_DIRS} ${_PKG_SILENT}${_PKG_DEBUG} \ cd ${WRKSRC}; cd ${_dir_}; \ ${SETENV} ${SCRIPTS_ENV} XPROJECTROOT=${X11BASE} ${XMKMF} . endfor . endif .endif .if defined(USE_LIBTOOL) && \ (defined(LIBTOOL_OVERRIDE) || defined(SHLIBTOOL_OVERRIDE)) _CONFIGURE_POSTREQ+= do-libtool-override .PHONY: do-libtool-override do-libtool-override: . if defined(LIBTOOL_OVERRIDE) . for _pattern_ in ${LIBTOOL_OVERRIDE} ${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC}; \ for file in ${_pattern_}; do \ if [ -f "$$file" ]; then \ ${RM} -f $$file; \ (${ECHO} '#!${CONFIG_SHELL}'; \ ${ECHO} 'exec ${_LIBTOOL} "$$@"'; \ ) > $$file; \ ${CHMOD} +x $$file; \ fi; \ done . endfor . endif . if defined(SHLIBTOOL_OVERRIDE) . for _pattern_ in ${SHLIBTOOL_OVERRIDE} ${_PKG_SILENT}${_PKG_DEBUG}cd ${WRKSRC}; \ for file in ${_pattern_}; do \ if [ -f "$$file" ]; then \ ${RM} -f $$file; \ (${ECHO} '#!${CONFIG_SHELL}'; \ ${ECHO} 'exec ${_SHLIBTOOL} "$$@"'; \ ) > $$file; \ ${CHMOD} +x $$file; \ fi; \ done . endfor . endif .endif .PHONY: post-configure post-configure: ${_CONFIGURE_POSTREQ} # Build BUILD_DIRS?= ${CONFIGURE_DIRS} BUILD_MAKE_FLAGS?= ${MAKE_FLAGS} .PHONY: do-build .if !target(do-build) do-build: . for _dir_ in ${BUILD_DIRS} ${_PKG_SILENT}${_PKG_DEBUG}${_ULIMIT_CMD} \ cd ${WRKSRC} && cd ${_dir_} && \ ${SETENV} ${MAKE_ENV} ${MAKE_PROGRAM} ${BUILD_MAKE_FLAGS} \ -f ${MAKEFILE} ${BUILD_TARGET} . endfor .endif #Test TEST_DIRS?= ${BUILD_DIRS} TEST_ENV+= ${MAKE_ENV} TEST_MAKE_FLAGS?= ${MAKE_FLAGS} .PHONY: do-test .if !target(do-test) do-test: . if defined(TEST_TARGET) && !empty(TEST_TARGET) . for _dir_ in ${TEST_DIRS} ${_PKG_SILENT}${_PKG_DEBUG}${_ULIMIT_CMD} \ cd ${WRKSRC} && cd ${_dir_} && \ ${SETENV} ${TEST_ENV} ${MAKE_PROGRAM} ${TEST_MAKE_FLAGS} \ -f ${MAKEFILE} ${TEST_TARGET} . endfor . else @${DO_NADA} . endif .endif .include "${PKGSRCDIR}/mk/flavor/bsd.flavor.mk" # Dependencies .include "${PKGSRCDIR}/mk/depends/bsd.depends.mk" # Check .include "${PKGSRCDIR}/mk/check/bsd.check.mk" # Clean .include "../../mk/bsd.pkg.clean.mk" # Fetch .include "${PKGSRCDIR}/mk/fetch/bsd.fetch.mk" # Extract .include "${PKGSRCDIR}/mk/extract/bsd.extract.mk" # Patch .include "${PKGSRCDIR}/mk/patch/bsd.patch.mk" # Install .include "${PKGSRCDIR}/mk/install/bsd.install.mk" # Package .include "${PKGSRCDIR}/mk/package/bsd.package.mk" .include "${PKGSRCDIR}/mk/bsd.pkg.update.mk" .PHONY: acquire-wrapper-lock acquire-configure-lock acquire-build-lock acquire-wrapper-lock: acquire-lock acquire-configure-lock: acquire-lock acquire-build-lock: acquire-lock .PHONY: release-wrapper-lock release-configure-lock release-build-lock release-wrapper-lock: release-lock release-configure-lock: release-lock release-build-lock: release-lock ################################################################ # Skeleton targets start here # # You shouldn't have to change these. Either add the pre-* or # post-* targets/scripts or redefine the do-* targets. These # targets don't do anything other than checking for cookies and # call the necessary targets/scripts. ################################################################ .PHONY: wrapper .if !target(wrapper) wrapper: patch acquire-wrapper-lock ${_WRAPPER_COOKIE} release-wrapper-lock .endif .PHONY: configure .if !target(configure) configure: wrapper acquire-configure-lock ${_CONFIGURE_COOKIE} release-configure-lock .endif .PHONY: _build .if !target(_build) _build: configure acquire-build-lock ${_BUILD_COOKIE} release-build-lock .endif .PHONY: build build: pkginstall .PHONY: test .if !target(test) test: build ${_TEST_COOKIE} .endif ${_WRAPPER_COOKIE}: ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${BUILD_ENV} ${MAKE} ${MAKEFLAGS} real-wrapper PKG_PHASE=wrapper PKG_ERROR_CLASSES+= configure PKG_ERROR_MSG.configure= \ "" \ "There was an error during the \`\`configure'' phase." \ "Please investigate the following for more information:" .if defined(GNU_CONFIGURE) PKG_ERROR_MSG.configure+= \ " * config.log" \ " * ${WRKLOG}" \ "" .else PKG_ERROR_MSG.configure+= \ " * log of the build" \ " * ${WRKLOG}" \ "" .endif .if defined(BROKEN_IN) PKG_ERROR_MSG.configure+= \ " * This package is broken in ${BROKEN_IN}." \ " * It may be removed in the next branch unless fixed." .endif ${_CONFIGURE_COOKIE}: .if !empty(INTERACTIVE_STAGE:Mconfigure) && defined(BATCH) @${ERROR_MSG} "The configuration stage of this package requires user interaction" @${ERROR_MSG} "Please configure manually with \"cd ${PKGDIR} && ${MAKE} configure\"" @${TOUCH} ${_INTERACTIVE_COOKIE} @${FALSE} .else ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${BUILD_ENV} ${MAKE} ${MAKEFLAGS} real-configure PKG_PHASE=configure || ${PKG_ERROR_HANDLER.configure} .endif PKG_ERROR_CLASSES+= build PKG_ERROR_MSG.build= \ "" \ "There was an error during the \`\`build'' phase." \ "Please investigate the following for more information:" \ " * log of the build" \ " * ${WRKLOG}" \ "" .if defined(BROKEN_IN) PKG_ERROR_MSG.build+= \ " * This package is broken in ${BROKEN_IN}." \ " * It may be removed in the next branch unless fixed." .endif ${_BUILD_COOKIE}: .if !empty(INTERACTIVE_STAGE:Mbuild) && defined(BATCH) @${ERROR_MSG} "The build stage of this package requires user interaction" @${ERROR_MSG} "Please build manually with \"cd ${PKGDIR} && ${MAKE} build\"" @${TOUCH} ${_INTERACTIVE_COOKIE} @${FALSE} .else ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${BUILD_ENV} ${MAKE} ${MAKEFLAGS} real-build PKG_PHASE=build || ${PKG_ERROR_HANDLER.build} .endif ${_TEST_COOKIE}: ${_PKG_SILENT}${_PKG_DEBUG}cd ${.CURDIR} && ${SETENV} ${BUILD_ENV} ${MAKE} ${MAKEFLAGS} real-test PKG_PHASE=test .PHONY: wrapper-message .PHONY: configure-message build-message test-message wrapper-message: @${PHASE_MSG} "Creating toolchain wrappers for ${PKGNAME}" configure-message: @${PHASE_MSG} "Configuring for ${PKGNAME}" build-message: @${PHASE_MSG} "Building for ${PKGNAME}" test-message: @${PHASE_MSG} "Testing for ${PKGNAME}" .PHONY: wrapper-cookie .PHONY: configure-cookie build-cookie test-cookie wrapper-cookie: ${_PKG_SILENT}${_PKG_DEBUG} ${TOUCH} ${TOUCH_FLAGS} ${_WRAPPER_COOKIE} configure-cookie: ${_PKG_SILENT}${_PKG_DEBUG} ${TOUCH} ${TOUCH_FLAGS} ${_CONFIGURE_COOKIE} build-cookie: ${_PKG_SILENT}${_PKG_DEBUG} ${TOUCH} ${TOUCH_FLAGS} ${_BUILD_COOKIE} test-cookie: ${_PKG_SILENT}${_PKG_DEBUG} ${TOUCH} ${TOUCH_FLAGS} ${_TEST_COOKIE} .ORDER: wrapper-message wrapper-vars pre-wrapper do-wrapper post-wrapper wrapper-cookie .ORDER: configure-message configure-vars pre-configure pre-configure-override do-configure post-configure configure-cookie .ORDER: build-message build-vars pre-build do-build post-build build-cookie .ORDER: test-message pre-test do-test post-test test-cookie # Please note that the order of the following targets is important, and # should not be modified (.ORDER is not recognised by make(1) in a serial # make i.e. without -j n) .PHONY: real-wrapper .PHONY: real-configure real-build real-test real-wrapper: wrapper-message wrapper-vars pre-wrapper do-wrapper post-wrapper wrapper-cookie error-check real-configure: configure-message configure-vars pre-configure pre-configure-override do-configure post-configure configure-cookie error-check real-build: build-message build-vars pre-build do-build post-build build-cookie error-check real-test: test-message pre-test do-test post-test test-cookie error-check # su-target is a macro target that does just-in-time su-to-root before # reinvoking the make process as root. It acquires root privileges and # invokes a new make process with the target named "su-${.TARGET}". # _ROOT_CMD= cd ${.CURDIR} && \ ${SETENV} PATH="$${PATH}:"${SU_CMD_PATH_APPEND:Q} \ ${MAKE} ${MAKEFLAGS} \ PKG_DEBUG_LEVEL=${PKG_DEBUG_LEVEL:Q} \ su-${.TARGET} ${MAKEFLAGS.${.TARGET}} .PHONY: su-target su-target: .USE ${_PKG_SILENT}${_PKG_DEBUG}set -e; \ case ${PRE_CMD.su-${.TARGET}:Q}"" in \ "") ;; \ *) ${PRE_CMD.su-${.TARGET}} ;; \ esac; \ if ${TEST} `${ID} -u` = `${ID} -u ${ROOT_USER}`; then \ ${_ROOT_CMD}; \ else \ case ${PRE_ROOT_CMD:Q}"" in \ ${TRUE:Q}"") ;; \ *) ${WARNING_MSG} "Running: "${PRE_ROOT_CMD:Q} ;; \ esac; \ ${PRE_ROOT_CMD}; \ ${STEP_MSG} "Becoming \`\`${ROOT_USER}'' to make su-${.TARGET} (`${ECHO} ${SU_CMD} | ${AWK} '{ print $$1 }'`)"; \ ${SU_CMD} ${_ROOT_CMD:Q}; \ ${STEP_MSG} "Dropping \`\`${ROOT_USER}'' privileges."; \ fi # Empty pre-* and post-* targets .for name in wrapper configure build test . if !target(pre-${name}) pre-${name}: @${DO_NADA} . endif . if !target(post-${name}) post-${name}: @${DO_NADA} . endif .endfor ################################################################ # Some more targets supplied for users' convenience ################################################################ # Run pkglint: .PHONY: lint lint: ${_PKG_SILENT}${_PKG_DEBUG}${LOCALBASE}/bin/pkglint # Checksumming utilities .PHONY: makesum .if !target(makesum) . if defined(NO_CHECKSUM) && !empty(NO_CHECKSUM:M[Yy][Ee][Ss]) makesum: @${DO_NADA} . else makesum: fetch uptodate-digest ${_PKG_SILENT}${_PKG_DEBUG} \ newfile=${DISTINFO_FILE}.$$$$; \ if [ -f ${DISTINFO_FILE} ]; then \ ${GREP} '^.NetBSD' ${DISTINFO_FILE} > $$newfile || \ (${ECHO_N} "$$" > $$newfile && \ ${ECHO_N} "NetBSD" >> $$newfile && \ ${ECHO} "$$" >> $$newfile) \ else \ ${ECHO_N} "$$" > $$newfile; \ ${ECHO_N} "NetBSD" >> $$newfile; \ ${ECHO} "$$" >> $$newfile; \ fi; \ ${ECHO} "" >> $$newfile; \ cd ${DISTDIR}; \ for sumfile in "" ${_CKSUMFILES}; do \ if [ "X$$sumfile" = "X" ]; then continue; fi; \ for a in "" ${DIGEST_ALGORITHMS}; do \ if [ "X$$a" = "X" ]; then continue; fi; \ ${DIGEST} $$a $$sumfile >> $$newfile; \ done; \ ${WC} -c $$sumfile | ${AWK} '{ print "Size (" $$2 ") = " $$1 " bytes" }' >> $$newfile; \ done; \ for ignore in "" ${_IGNOREFILES}; do \ if [ "X$$ignore" = "X" ]; then continue; fi; \ for a in "" ${DIGEST_ALGORITHMS}; do \ if [ "X$$a" = "X" ]; then continue; fi; \ ${ECHO} "$$a ($$ignore) = IGNORE" >> $$newfile; \ done; \ done; \ if [ -f ${DISTINFO_FILE} ]; then \ ${AWK} '$$2 ~ /\(patch-[a-z0-9]+\)/ { print $$0 }' < ${DISTINFO_FILE} >> $$newfile; \ fi; \ if ${CMP} -s $$newfile ${DISTINFO_FILE}; then \ ${RM} -f $$newfile; \ ${ECHO_MSG} "=> distinfo: distfiles part unchanged."; \ else \ ${MV} $$newfile ${DISTINFO_FILE}; \ fi . endif .endif .if !target(makepatchsum) makepatchsum mps: uptodate-digest ${_PKG_SILENT}${_PKG_DEBUG} \ newfile=${DISTINFO_FILE}.$$$$; \ if [ -f ${DISTINFO_FILE} ]; then \ ${AWK} '$$2 !~ /\(patch-[a-z0-9]+\)/ { print $$0 }' < ${DISTINFO_FILE} >> $$newfile; \ else \ ${ECHO} "\$$""NetBSD""\$$" > $$newfile; \ ${ECHO} "" >> $$newfile; \ fi; \ if [ -d ${PATCHDIR} ]; then \ (cd ${PATCHDIR}; \ for sumfile in "" patch-*; do \ case $$sumfile in \ "" | "patch-*") ;; \ patch-local-* | *.orig | *.rej | *~) ;; \ *) ${ECHO} "${PATCH_DIGEST_ALGORITHM} ($$sumfile) = `${SED} -e '/\$$NetBSD.*/d' $$sumfile | ${DIGEST} ${PATCH_DIGEST_ALGORITHM}`" >> $$newfile;; \ esac; \ done); \ fi; \ if ${CMP} -s $$newfile ${DISTINFO_FILE}; then \ ${RM} -f $$newfile; \ ${ECHO_MSG} "=> distinfo: patches part unchanged."; \ else \ ${MV} $$newfile ${DISTINFO_FILE}; \ fi .endif # This target is done by invoking a sub-make so that DISTINFO_FILE gets # re-evaluated after the "makepatchsum" target is made. This can be # made into: #makedistinfo mdi: makepatchsum makesum # once a combined distinfo file exists for all packages .if !target(makedistinfo) makedistinfo mdi distinfo: makepatchsum ${_PKG_SILENT}${_PKG_DEBUG}${MAKE} makesum .endif .PHONY: checksum .if !target(checksum) checksum: fetch uptodate-digest ${_PKG_SILENT}${_PKG_DEBUG} \ if [ ! -f ${DISTINFO_FILE} ]; then \ ${ECHO_MSG} "=> No checksum file."; \ else \ (cd ${DISTDIR}; OK="true"; missing=""; \ for file in "" ${_CKSUMFILES}; do \ if [ "X$$file" = X"" ]; then continue; fi; \ filesummed=false; \ for a in ${DIGEST_ALGORITHMS}; do \ CKSUM2=`${AWK} 'NF == 4 && $$1 == "'$$a'" && $$2 == "('$$file')" && $$3 == "=" {print $$4; exit}' ${DISTINFO_FILE}`; \ case "$${CKSUM2}" in \ "") ${ECHO_MSG} "=> No $$a checksum recorded for $$file."; \ ;; \ *) filesummed=true; \ CKSUM=`${DIGEST} $$a < $$file`; \ if [ "$$CKSUM2" = "IGNORE" ]; then \ ${ECHO_MSG} "=> Checksum for $$file is set to IGNORE in checksum file even though"; \ ${ECHO_MSG} " the file is not in the "'$$'"{IGNOREFILES} list."; \ OK="false"; \ elif [ "$$CKSUM" = "$$CKSUM2" ]; then \ ${ECHO_MSG} "=> Checksum $$a OK for $$file."; \ else \ ${ECHO_MSG} "=> Checksum $$a mismatch for $$file."; \ OK="false"; \ fi ;; \ esac; \ done; \ case "$$filesummed" in \ false) missing="$$missing $$file"; \ OK=false ;; \ esac; \ done; \ for file in "" ${_IGNOREFILES}; do \ if [ "X$$file" = X"" ]; then continue; fi; \ CKSUM2=`${AWK} 'NF == 4 && $$3 == "=" && $$2 == "('$$file')"{print $$4; exit}' ${DISTINFO_FILE}`; \ if [ "$$CKSUM2" = "" ]; then \ ${ECHO_MSG} "=> No checksum recorded for $$file, file is in "'$$'"{IGNOREFILES} list."; \ OK="false"; \ elif [ "$$CKSUM2" != "IGNORE" ]; then \ ${ECHO_MSG} "=> Checksum for $$file is not set to IGNORE in checksum file even though"; \ ${ECHO_MSG} " the file is in the "'$$'"{IGNOREFILES} list."; \ OK="false"; \ fi; \ done; \ if [ "$$OK" != "true" ]; then \ case "$$missing" in \ "") ;; \ *) ${ECHO_MSG} "Missing checksums for $$missing";; \ esac; \ ${ECHO_MSG} "Make sure the Makefile and checksum file (${DISTINFO_FILE})"; \ ${ECHO_MSG} "are up to date. If you want to override this check, type"; \ ${ECHO_MSG} "\"${MAKE} NO_CHECKSUM=yes [other args]\"."; \ exit 1; \ fi) ; \ fi .endif # List of sites carrying binary pkgs. Variables "rel" and "arch" are # replaced with OS release ("1.5", ...) and architecture ("mipsel", ...) BINPKG_SITES?= \ ftp://ftp.NetBSD.org/pub/NetBSD/packages/$${rel}/$${arch} # List of flags to pass to pkg_add(1) for bin-install: BIN_INSTALL_FLAGS?= # -v .if ${PKG_INSTALLATION_TYPE} == "pkgviews" PKG_ARGS_ADD= -W ${LOCALBASE} -w ${DEFAULT_VIEW} .endif _BIN_INSTALL_FLAGS= ${BIN_INSTALL_FLAGS} .if defined(_AUTOMATIC) && !empty(_AUTOMATIC:MYES) _BIN_INSTALL_FLAGS+= -A .endif _BIN_INSTALL_FLAGS+= ${PKG_ARGS_ADD} _SHORT_UNAME_R= ${:!${UNAME} -r!:C@\.([0-9]*)[_.].*@.\1@} # n.n[_.]anything => n.n # Install binary pkg, without strict uptodate-check first .PHONY: su-bin-install su-bin-install: @found="`${PKG_BEST_EXISTS} \"${PKGWILDCARD}\" || ${TRUE}`"; \ if [ "$$found" != "" ]; then \ ${ERROR_MSG} "$$found is already installed - perhaps an older version?"; \ ${ERROR_MSG} "If so, you may wish to \`\`pkg_delete $$found'' and install"; \ ${ERROR_MSG} "this package again by \`\`${MAKE} bin-install'' to upgrade it properly."; \ exit 1; \ fi @rel=${_SHORT_UNAME_R:Q} ; \ arch=${MACHINE_ARCH:Q} ; \ pkgpath=${PKGREPOSITORY:Q} ; \ for i in ${BINPKG_SITES} ; do pkgpath="$$pkgpath;$$i/All" ; done ; \ ${ECHO} "Trying $$pkgpath" ; \ if ${SETENV} PKG_PATH="$$pkgpath" ${PKG_ADD} ${_BIN_INSTALL_FLAGS} ${PKGNAME_REQD:U${PKGNAME}:Q}${PKG_SUFX} ; then \ ${ECHO} "`${PKG_INFO} -e ${PKGNAME_REQD:U${PKGNAME}:Q}` successfully installed."; \ else \ ${SHCOMMENT} Cycle through some FTP server here ;\ ${ECHO_MSG} "Installing from source" ; \ ${MAKE} ${MAKEFLAGS} package \ DEPENDS_TARGET=${DEPENDS_TARGET:Q} && \ ${MAKE} ${MAKEFLAGS} clean ; \ fi .PHONY: bin-install bin-install: su-target @${PHASE_MSG} "Binary install for "${PKGNAME_REQD:U${PKGNAME}:Q} ################################################################ # The special package-building targets # You probably won't need to touch these ################################################################ # Set to "html" by the README.html target to generate HTML code, # or to "svr4" to print SVR4 (Solaris, ...) short package names, from # SVR4_PKGNAME variable. # This variable is passed down via build-depends-list and run-depends-list PACKAGE_NAME_TYPE?= name _HTML_PKGNAME= ${PKGNAME:S/&/\&/g:S/>/\>/g:S//\>/g:S/${_HTML_PKGNAME} .PHONY: package-name .if !target(package-name) package-name: . if (${PACKAGE_NAME_TYPE} == "html") @${ECHO} ${_HTML_PKGLINK:Q} . elif (${PACKAGE_NAME_TYPE} == "svr4") @${ECHO} ${SVR4_PKGNAME} . else @${ECHO} ${PKGNAME} . endif # PACKAGE_NAME_TYPE .endif # !target(package-name) .PHONY: make-readme-html-help .if !target(make-readme-html-help) make-readme-html-help: @${ECHO} '${PKGNAME:S/&/\&/g:S/>/\>/g:S/: '${COMMENT:S/&/\&/g:S/>/\>/g:S//dev/null; then \ ${MAKE} ${MAKEFLAGS} package-name PACKAGE_NAME_TYPE=${PACKAGE_NAME_TYPE}; \ else \ ${ECHO_MSG} "Warning: \"$$dir\" non-existent -- @pkgdep registration incomplete" >&2; \ fi; \ fi . endfor .endif # target(run-depends-list) .PHONY: build-depends-list .if !target(build-depends-list) build-depends-list: @for dir in `${MAKE} ${MAKEFLAGS} show-all-depends-dirs-excl`; \ do \ (cd ../../$$dir && \ ${MAKE} ${MAKEFLAGS} package-name) \ done .endif # If PACKAGES is set to the default (../../pkgsrc/packages), the current # ${MACHINE_ARCH} and "release" (uname -r) will be used. Otherwise a directory # structure of ...pkgsrc/packages/`uname -r`/${MACHINE_ARCH} is assumed. # The PKG_URL is set from FTP_PKG_URL_* or CDROM_PKG_URL_*, depending on # the target used to generate the README.html file. .PHONY: binpkg-list .if !target(binpkg-list) binpkg-list: @if ${TEST} -d ${PACKAGES}; then \ cd ${PACKAGES}; \ case ${.CURDIR} in \ */pkgsrc/packages) \ for pkg in ${PKGREPOSITORYSUBDIR}/${PKGWILDCARD}${PKG_SUFX} ; \ do \ if [ -f "$$pkg" ] ; then \ pkgname=`${ECHO} $$pkg | ${SED} 's@.*/@@'`; \ ${ECHO} "${MACHINE_ARCH}:$$pkgname(${OPSYS} ${OS_VERSION})"; \ fi ; \ done ; \ ;; \ *) \ cd ${PACKAGES}/../..; \ for i in [1-9].*/*; do \ if cd ${PACKAGES}/../../$$i/${PKGREPOSITORYSUBDIR} 2>/dev/null; then \ for j in ${PKGWILDCARD}${PKG_SUFX}; \ do \ if [ -f "$$j" ]; then \ ${ECHO} $$i/$$j;\ fi; \ done; \ fi; \ done | ${AWK} -F/ ' \ { \ release = $$1; \ arch = $$2; \ pkg = $$3; \ gsub("\\.tgz","", pkg); \ if (arch != "m68k" && arch != "mipsel") { \ if (arch in urls) \ urls[arch "/" pkg "/" release] = "" pkg ", " urls[arch]; \ else \ urls[arch "/" pkg "/" release] = "" pkg " "; \ } \ } \ END { \ for (av in urls) { \ split(av, ava, "/"); \ arch=ava[1]; \ pkg=ava[2]; \ release=ava[3]; \ print "" arch ":" urls[av] "(${OPSYS} " release ")"; \ } \ }' | ${SORT} \ ;; \ esac; \ fi .endif ################################################################ # Everything after here are internal targets and really # shouldn't be touched by anybody but the release engineers. ################################################################ # This target generates an index entry suitable for aggregation into # a large index. Format is: # # distribution-name|package-path|installation-prefix|comment| \ # description-file|maintainer|categories|build deps|run deps|for arch| \ # not for opsys # .PHONY: describe .if !target(describe) describe: @${ECHO_N} "${PKGNAME}|${.CURDIR}|"; \ ${ECHO_N} "${PREFIX}|"; \ ${ECHO_N} ${COMMENT:Q}; \ if [ -f ${DESCR_SRC} ]; then \ ${ECHO_N} "|${DESCR_SRC}"; \ else \ ${ECHO_N} "|/dev/null"; \ fi; \ ${ECHO_N} "|${MAINTAINER}|${CATEGORIES}|"; \ case "A${BUILD_DEPENDS}B${DEPENDS}C" in \ ABC) ;; \ *) cd ${.CURDIR} && ${ECHO_N} `${MAKE} ${MAKEFLAGS} build-depends-list | ${SORT} -u`;; \ esac; \ ${ECHO_N} "|"; \ if [ "${DEPENDS}" != "" ]; then \ cd ${.CURDIR} && ${ECHO_N} `${MAKE} ${MAKEFLAGS} run-depends-list | ${SORT} -u`; \ fi; \ ${ECHO_N} "|"; \ if [ "${ONLY_FOR_PLATFORM}" = "" ]; then \ ${ECHO_N} "any"; \ else \ ${ECHO_N} "${ONLY_FOR_PLATFORM}"; \ fi; \ ${ECHO_N} "|"; \ if [ "${NOT_FOR_PLATFORM}" = "" ]; then \ ${ECHO_N} "any"; \ else \ ${ECHO_N} "not ${NOT_FOR_PLATFORM}"; \ fi; \ ${ECHO} "" .endif .PHONY: readmes .if !target(readmes) readmes: readme .endif # This target is used to generate README.html files .PHONY: readme .if !target(readme) FTP_PKG_URL_HOST?= ftp://ftp.NetBSD.org FTP_PKG_URL_DIR?= /pub/NetBSD/packages readme: @cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} README.html PKG_URL=${FTP_PKG_URL_HOST}${FTP_PKG_URL_DIR} .endif # This target is used to generate README.html files, very like "readme" # However, a different target was used for ease of use. .PHONY: cdrom-readme .if !target(cdrom-readme) CDROM_PKG_URL_HOST?= file://localhost CDROM_PKG_URL_DIR?= /usr/pkgsrc/packages cdrom-readme: @cd ${.CURDIR} && ${MAKE} ${MAKEFLAGS} README.html PKG_URL=${CDROM_PKG_URL_HOST}${CDROM_PKG_URL_DIR} .endif README_NAME= ${TEMPLATES}/README.pkg # set up the correct license information as a sed expression .if defined(LICENSE) SED_LICENSE_EXPR= -e 's|%%LICENSE%%|

Please note that this package has a ${LICENSE} license.

|' .else SED_LICENSE_EXPR= -e 's|%%LICENSE%%||' .endif # set up the "more info URL" information as a sed expression .if defined(HOMEPAGE) SED_HOMEPAGE_EXPR= -e 's|%%HOMEPAGE%%|

This package has a home page at ${HOMEPAGE}.

|' .else SED_HOMEPAGE_EXPR= -e 's|%%HOMEPAGE%%||' .endif .PHONY: show-vulnerabilities-html show-vulnerabilities-html: ${_PKG_SILENT}${_PKG_DEBUG} \ if [ -f ${PKGVULNDIR}/pkg-vulnerabilities ]; then \ ${AWK} '/^${PKGBASE}[-<>=]+[0-9]/ { gsub("\<", "\\<", $$1); \ gsub("\>", "\\>", $$1); \ printf("
  • %s has a %s exploit (see %s for more details)
    • \n", $$1, $$2, $$3, $$3) }' \ ${PKGVULNDIR}/pkg-vulnerabilities; \ fi # If PACKAGES is set to the default (../../packages), the current # ${MACHINE_ARCH} and "release" (uname -r) will be used. Otherwise a directory # structure of ...pkgsrc/packages/`uname -r`/${MACHINE_ARCH} is assumed. # The PKG_URL is set from FTP_PKG_URL_* or CDROM_PKG_URL_*, depending on # the target used to generate the README.html file. .PHONY: README.html README.html: .PRECIOUS @${SETENV} AWK=${AWK} BMAKE=${MAKE} ../../mk/scripts/mkdatabase -f $@.tmp1 @if ${TEST} -d ${PACKAGES}; then \ cd ${PACKAGES}; \ case `${PWD_CMD}` in \ ${PKGSRCDIR}/packages) \ MULTIARCH=no; \ ;; \ *) \ MULTIARCH=yes; \ ;; \ esac; \ cd ${.CURDIR} ; \ fi; \ ${AWK} -f ../../mk/scripts/genreadme.awk \ builddependsfile=/dev/null \ dependsfile=/dev/null \ AWK=${AWK:Q} \ CMP=${CMP:Q} \ DISTDIR=${DISTDIR:Q} \ GREP=${GREP:Q} \ PACKAGES=${PACKAGES:Q} \ PKG_INFO=${PKG_INFO:Q} \ PKG_SUFX=${PKG_SUFX:Q} \ PKG_URL=${PKG_URL:Q} \ PKGSRCDIR=${.CURDIR:C|/[^/]*/[^/]*$||:Q} \ SED=${SED:Q} \ SETENV=${SETENV:Q} \ SORT=${SORT:Q} \ TMPDIR=${TMPDIR:U/tmp:Q} \ SINGLEPKG=${PKGPATH:Q} \ $@.tmp1 @${RM} $@.tmp1 .PHONY: show-pkgtools-version .if !target(show-pkgtools-version) show-pkgtools-version: @${ECHO} ${PKGTOOLS_VERSION} .endif # convenience target, to display make variables from command line # i.e. "make show-var VARNAME=var", will print var's value .PHONY: show-var show-var: @${ECHO} ${${VARNAME}:Q} # enhanced version of target above, to display multiple variables .PHONY: show-vars show-vars: .for VARNAME in ${VARNAMES} @${ECHO} ${${VARNAME}:Q} .endfor # displays multiple variables as shell expressions # VARS is space separated list of VARNAME:shellvarname .PHONY: show-vars-eval show-vars-eval: .for var in ${VARS} @${ECHO} ${var:C/^.*://}="${${var:C/:.*$//}:Q}" .endfor .PHONY: print-build-depends-list .if !target(print-build-depends-list) print-build-depends-list: . if !empty(BUILD_DEPENDS) || !empty(DEPENDS) @${ECHO_N} 'This package requires package(s) "' @${ECHO_N} `${MAKE} ${MAKEFLAGS} build-depends-list | ${SORT} -u` @${ECHO} '" to build.' . endif .endif .PHONY: print-run-depends-list .if !target(print-run-depends-list) print-run-depends-list: . if !empty(DEPENDS) @${ECHO_N} 'This package requires package(s) "' @${ECHO_N} `${MAKE} ${MAKEFLAGS} run-depends-list | ${SORT} -u` @${ECHO} '" to run.' . endif .endif # This target is used by the mk/scripts/mkreadme script to generate # README.html files .PHONY: print-summary-data .if !target(print-summary-data) print-summary-data: @${ECHO} depends ${PKGPATH} ${DEPENDS:Q} @${ECHO} build_depends ${PKGPATH} ${BUILD_DEPENDS:Q} @${ECHO} conflicts ${PKGPATH} ${CONFLICTS:Q} @${ECHO} index ${PKGPATH} ${PKGNAME:Q} @${ECHO} htmlname ${PKGPATH} ${_HTML_PKGLINK:Q} @${ECHO} homepage ${PKGPATH} ${HOMEPAGE:Q} @${ECHO} wildcard ${PKGPATH} ${PKGWILDCARD:Q} @${ECHO} comment ${PKGPATH} ${COMMENT:Q} @${ECHO} license ${PKGPATH} ${LICENSE:Q} @if [ "${ONLY_FOR_PLATFORM}" = "" ]; then \ ${ECHO} "onlyfor ${PKGPATH} any"; \ else \ ${ECHO} "onlyfor ${PKGPATH} ${ONLY_FOR_PLATFORM}"; \ fi @if [ "${NOT_FOR_PLATFORM}" = "" ]; then \ ${ECHO} "notfor ${PKGPATH} any"; \ else \ ${ECHO} "notfor ${PKGPATH} not ${NOT_FOR_PLATFORM}"; \ fi; @${ECHO} "maintainer ${PKGPATH} ${MAINTAINER}" @${ECHO} "categories ${PKGPATH} ${CATEGORIES}" @if [ -f ${DESCR_SRC} ]; then \ ${ECHO} "descr ${PKGPATH} ${DESCR_SRC:S;${PKGSRCDIR}/;;g}"; \ else \ ${ECHO} "descr ${PKGPATH} /dev/null"; \ fi @${ECHO} "prefix ${PKGPATH} ${PREFIX}" .endif LICENSE_FILE?= ${PKGSRCDIR}/licenses/${LICENSE} .if !target(show-license) show-license show-licence: @license=${LICENSE:Q}; \ license_file=${LICENSE_FILE:Q}; \ pager=${PAGER:Q}; \ case "$$pager" in "") pager=${CAT:Q};; esac; \ case "$$license" in "") exit 0;; esac; \ if ${TEST} -f "$$license_file"; then \ $$pager "$$license_file"; \ else \ ${ECHO} "Generic $$license information not available"; \ ${ECHO} "See the package description (pkg_info -d ${PKGNAME}) for more information."; \ fi .endif # This target is defined in bsd.options.mk for packages that use # the options framework. .if !target(show-options) .PHONY: show-options show-options: @${ECHO} This package does not use the options framework. .endif # Depend is generally meaningless for arbitrary packages, but if someone wants # one they can override this. This is just to catch people who've gotten into # the habit of typing `${MAKE} depend all install' as a matter of course. # .PHONY: depend .if !target(depend) depend: .endif # Same goes for tags .PHONY: tags .if !target(tags) tags: .endif .include "../../mk/plist/bsd.plist.mk" .include "../../mk/bsd.utils.mk" .include "../../mk/subst.mk" # # For bulk build targets (bulk-install, bulk-package), the # BATCH variable must be set in /etc/mk.conf: # .if defined(BATCH) . include "../../mk/bulk/bsd.bulk-pkg.mk" .endif # Create a PKG_ERROR_HANDLER shell command for each class listed in # PKG_ERROR_CLASSES. The error handler is meant to be invoked within # a make target. # .for _class_ in ${PKG_ERROR_CLASSES} PKG_ERROR_HANDLER.${_class_}?= { \ ec=$$?; \ for str in ${PKG_ERROR_MSG.${_class_}}; do \ ${PHASE_MSG} "$$str"; \ done; \ exit $$ec; \ } .endfor # Cache variables listed in MAKEVARS in a phase-specific "makevars.mk" # file. These variables are effectively passed to sub-make processes # that are invoked on the same Makefile. # .for _phase_ in ${ALL_PHASES} ${_MAKEVARS_MK.${_phase_}}: ${WRKDIR} ${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${.TARGET}.tmp . for _var_ in ${MAKEVARS:O:u} . if defined(${_var_}) ${_PKG_SILENT}${_PKG_DEBUG} \ ${ECHO} ${_var_}"= "${${_var_}:Q} >> ${.TARGET}.tmp . endif . endfor ${_PKG_SILENT}${_PKG_DEBUG} \ if ${TEST} -f ${.TARGET}.tmp; then \ ( ${ECHO} ".if !defined(_MAKEVARS_MK)"; \ ${ECHO} "_MAKEVARS_MK= defined"; \ ${ECHO} ""; \ ${CAT} ${.TARGET}.tmp; \ ${ECHO} ""; \ ${ECHO} ".endif # _MAKEVARS_MK"; \ ) > ${.TARGET}; \ ${RM} -f ${.TARGET}.tmp; \ fi ${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${.TARGET} .endfor .undef _phase_ # show-tools emits a /bin/sh shell script that defines all known tools # to the values they have in the pkgsrc infrastructure. # # Don't move this code away from here unless you know what you're doing. # .PHONY: show-tools show-tools: .for _t_ in ${_USE_TOOLS} . if defined(_TOOLS_VARNAME.${_t_}) @${ECHO} ${_TOOLS_VARNAME.${_t_}:Q}=${${_TOOLS_VARNAME.${_t_}}:Q:Q} . endif .endfor # changes-entry appends a correctly-formatted entry to the pkgsrc # CHANGES file. # # The following variables may be set: # # CTYPE is the type of entry to add and is one of "Added", "Updated", # "Renamed", "Moved", of "Removed". The default CTYPE is "Updated". # # NETBSD_LOGIN_NAME is the login name assigned by the NetBSD Project. # It defaults to the local login name. # # PKGSRC_CHANGES is the path to the CHANGES file to which the entry # is appended. It defaults to ${PKGSRCDIR}/doc/CHANGES. # # Example usage: # # % cd /usr/pkgsrc/category/package # % make changes-entry CTYPE=Added # CTYPE?= Updated NETBSD_LOGIN_NAME?= ${_NETBSD_LOGIN_NAME_cmd:sh} PKGSRC_CHANGES?= ${PKGSRCDIR}/doc/CHANGES-${_CYEAR_cmd:sh} _CYEAR_cmd= ${DATE} -u +%Y _CDATE_cmd= ${DATE} -u +%Y-%m-%d _NETBSD_LOGIN_NAME_cmd= ${ID} -nu _CTYPE1= " "${CTYPE:Q}" "${PKGPATH:Q} .if !empty(CTYPE:MUpdated) _CTYPE2= " to "${PKGVERSION:Q} .elif !empty(CTYPE:MAdded) _CTYPE2= " version "${PKGVERSION:Q} .elif !empty(CTYPE:MRenamed) || !empty(CTYPE:MMoved) _CTYPE2= " to XXX" .else _CTYPE2= .endif _CTYPE3= " ["${NETBSD_LOGIN_NAME:Q}" "${_CDATE_cmd:sh:Q}"]" .PHONY: changes-entry changes-entry: ${_PKG_SILENT}${_PKG_DEBUG} \ ${ECHO} ${_CTYPE1}${_CTYPE2}${_CTYPE3} >> ${PKGSRC_CHANGES:Q}