# $NetBSD: bsd.buildlink3.mk,v 1.141 2004/04/24 15:49:42 minskim Exp $
#
# An example package buildlink3.mk file:
#
# -------------8<-------------8<-------------8<-------------8<-------------
# BUILDLINK_DEPTH:=	${BUILDLINK_DEPTH}+
# FOO_BUILDLINK3_MK:=	${FOO_BUILDLINK3_MK}+
#
# .if !empty(BUILDLINK_DEPTH:M+)
# BUILDLINK_DEPENDS+=	foo
# .endif
#
# BUILDLINK_PACKAGES:=	${BUILDLINK_PACKAGES:Nfoo}
# BUILDLINK_PACKAGES+=	foo
#
# .if !empty(FOO_BUILDLINK3_MK:M+)
# BUILDLINK_PKGBASE.foo+=	foo-lib
# BUILDLINK_DEPENDS.foo+=	foo-lib>=1.0
# BUILDLINK_RECOMMENDED.foo?=	foo-lib>=1.0nb1
# BUILDLINK_PKGSRCDIR.foo?=	../../category/foo-lib
#
# # We want "-lbar" to eventually resolve to "-lfoo".
# BUILDLINK_TRANSFORM+=		l:bar:foo
# .endif  # FOO_BUILDLINK3_MK
#
# .include "../../category/baz/buildlink3.mk"
#
# BUILDLINK_DEPTH:=	${BUILDLINK_DEPTH:S/+$//}
# -------------8<-------------8<-------------8<-------------8<-------------
#
# Most of the buildlink3.mk file is protected against multiple inclusion,
# except for the parts related to manipulating BUILDLINK_DEPTH and adding
# to BUILDLINK_DEPENDS.
#
# Note that if a buildlink3.mk file is included, then the package Makefile
# has the expectation that it can use the value of BUILDLINK_PREFIX.<pkg>.
# If the buildlink3.mk tries to handle dependencies satisfied directly by
# the base system, then it should provide an appropriate value for
# BUILDLINK_PREFIX.<pkg> for that case.  The case where a dependency is
# satisfied by a pkgsrc-installed package is handled automatically by this
# file.
#
# The different variables that may be set in a buildlink3.mk file are
# described below.
#
# The variable name convention used in this Makefile are:
#
# BUILDLINK_*	public buildlink-related variables usable in other Makefiles
# _BLNK_*	private buildlink-related variables to this Makefile

ECHO_BUILDLINK_MSG?=	${TRUE}
BUILDLINK_DIR=		${WRKDIR}/.buildlink
BUILDLINK_X11_DIR=	${BUILDLINK_DIR:H}/.x11-buildlink
BUILDLINK_SHELL?=	${SH}
BUILDLINK_OPSYS?=	${OPSYS}
_BLNK_VARS_MK=		${BUILDLINK_DIR}/vars.mk

.if exists(${_BLNK_VARS_MK})
.  include "${_BLNK_VARS_MK}"
.endif

# Prepend ${BUILDLINK_DIR}/bin to the PATH so that the wrappers are found
# first when searching for executables.
#
PREPEND_PATH+=	${BUILDLINK_DIR}/bin

# BUILDLINK_DEPENDS contains the list of packages for which we add
# dependencies.
#
BUILDLINK_DEPENDS?=	# empty

# For each package we use, check whether we are using the built-in
# version of the package or if we are using the pkgsrc version.
#
.include "../../mk/buildlink3/bsd.builtin.mk"

# Check whether we should include the X11 buildlink3.mk file here since
# USE_X11 may have been set indirectly by bsd.builtin.mk.
#
.if defined(USE_X11)
X11_TYPE?=		native
X11_PKGSRCDIR.native=	../../pkgtools/x11-links
X11_PKGSRCDIR.XFree86=	../../x11/XFree86-libs
X11_PKGSRCDIR.xlibs=	../../x11/xlibs
.  if exists(${X11_PKGSRCDIR.${X11_TYPE}}/buildlink3.mk)
.    include "${X11_PKGSRCDIR.${X11_TYPE}}/buildlink3.mk"
.    if exists(${X11_PKGSRCDIR.${X11_TYPE}}/builtin.mk)
.      include "${X11_PKGSRCDIR.${X11_TYPE}}/builtin.mk"
.    endif
.  else
PKG_FAIL_REASON+=	\
	"${PKGNAME} uses X11, but \"${X11_TYPE}\" isn't a valid X11 type."
.  endif
.endif

# Set IGNORE_PKG.<pkg> if <pkg> is the current package we're building.  
# We can then check for this value to avoid build loops.
#
.for _pkg_ in ${BUILDLINK_PACKAGES}
.  if defined(BUILDLINK_PKGSRCDIR.${_pkg_})
.    if !defined(IGNORE_PKG.${_pkg_}) && \
        (${BUILDLINK_PKGSRCDIR.${_pkg_}:C|.*/([^/]*/[^/]*)$|\1|} == ${PKGPATH})
IGNORE_PKG.${_pkg_}=	yes
MAKEFLAGS+=		IGNORE_PKG.${_pkg_}=${IGNORE_PKG.${_pkg_}}
.    endif
.  endif
.endfor

# _BLNK_PACKAGES contains all of the unique elements of BUILDLINK_PACKAGES
# that shouldn't be skipped.
#
_BLNK_PACKAGES=		# empty
.for _pkg_ in ${BUILDLINK_PACKAGES}
.  if empty(_BLNK_PACKAGES:M${_pkg_}) && !defined(IGNORE_PKG.${_pkg_})
_BLNK_PACKAGES+=	${_pkg_}
.  endif
.endfor

# _BLNK_RECURSIVE_DEPENDS lists all of the packages that this package
# directly or indirectly depends on.
#
_BLNK_RECURSIVE_DEPENDS=	# empty
.for _pkg_ in ${_BLNK_PACKAGES}
USE_BUILTIN.${_pkg_}?=		no
.  if empty(_BLNK_RECURSIVE_DEPENDS:M${_pkg_}) && \
      !empty(USE_BUILTIN.${_pkg_}:M[nN][oO])
_BLNK_RECURSIVE_DEPENDS+=	${_pkg_}
.  endif
.endfor

# _BLNK_DEPENDS contains all of the elements of BUILDLINK_DEPENDS that
# shouldn't be skipped and that name packages for which we aren't using
# the built-in software and hence need to add a dependency.
#
_BLNK_DEPENDS=	# empty
.for _pkg_ in ${BUILDLINK_DEPENDS}   
USE_BUILTIN.${_pkg_}?=	no
.  if empty(_BLNK_DEPENDS:M${_pkg_}) && !defined(IGNORE_PKG.${_pkg_}) && \
      !empty(_BLNK_PACKAGES:M${_pkg_}) && \
      !empty(USE_BUILTIN.${_pkg_}:M[nN][oO])
_BLNK_DEPENDS+=	${_pkg_}
.    endif
.endfor

# By default, every package receives a full dependency.
.for _pkg_ in ${_BLNK_PACKAGES}
BUILDLINK_DEPMETHOD.${_pkg_}?=	full
.endfor

# We skip the dependency calculation for some phases since they never
# use the dependency information.
#
_BLNK_PHASES_SKIP_DEPENDS=	fetch patch tools buildlink configure	\
				build test
_BLNK_PHASES_RECURSIVE_DEPENDS=	extract
.if !empty(_BLNK_PHASES_SKIP_DEPENDS:M${PKG_PHASE})
_BLNK_DEPENDS_LIST=	# empty
.elif !empty(_BLNK_PHASES_RECURSIVE_DEPENDS:M${PKG_PHASE})
_BLNK_DEPENDS_LIST=	${_BLNK_RECURSIVE_DEPENDS}
.else
_BLNK_DEPENDS_LIST=	${_BLNK_DEPENDS}
.endif

# Add the proper dependency on each package pulled in by buildlink3.mk
# files.  BUILDLINK_DEPMETHOD.<pkg> contains a list of either "full" or
# "build", and if any of that list is "full" then we use a full dependency
# on <pkg>, otherwise we use a build dependency on <pkg>.
#
_BLNK_ADD_TO.DEPENDS=		# empty
_BLNK_ADD_TO.BUILD_DEPENDS=	# empty
_BLNK_ADD_TO.RECOMMENDED=	# empty
.for _pkg_ in ${_BLNK_DEPENDS_LIST}
.  if !empty(BUILDLINK_DEPMETHOD.${_pkg_}:Mfull)
_BLNK_DEPMETHOD.${_pkg_}=	_BLNK_ADD_TO.DEPENDS
_BLNK_RECMETHOD.${_pkg_}=	_BLNK_ADD_TO.RECOMMENDED
.  elif !empty(BUILDLINK_DEPMETHOD.${_pkg_}:Mbuild)
_BLNK_DEPMETHOD.${_pkg_}=	_BLNK_ADD_TO.BUILD_DEPENDS
.  endif
.  if defined(BUILDLINK_DEPENDS.${_pkg_}) && \
      defined(BUILDLINK_PKGSRCDIR.${_pkg_})
#
# BEGIN dependency reduction
#
# This next block of code sets _BLNK_DEPENDS.<pkg> to the strictest set of
# dependencies it can derive from ${BUILDLINK_DEPENDS.<pkg>}.  It only
# understands dependencies of the form foo>=1.0, and leaves the other
# dependencies undisturbed.
#
# The algorithm takes dependencies of the form foo>=1.0 and converts them
# to foo-1.0.  It then compares this pkg name against each dependency to
# see if it satisfies them all.  The key fact is the the strictest
# dependency, when converted to a pkg name, will satisfy every dependency.
#
_BLNK_DEPENDS.${_pkg_}=		# empty
_BLNK_GE_DEPENDS.${_pkg_}=	${BUILDLINK_DEPENDS.${_pkg_}:N*\{*:M*>=[0-9]*}
_BLNK_STRICTEST_DEPENDS.${_pkg_}?=	none
.    for _depend_ in ${_BLNK_GE_DEPENDS.${_pkg_}}
.      for _dep2pkg_ in ${_depend_:S/>=/-/}
.        if ${_BLNK_STRICTEST_DEPENDS.${_pkg_}} == "none"
_BLNK_PKG_SATISFIES_DEP.${_pkg_}=	YES
.          for _dep_ in ${_BLNK_GE_DEPENDS.${_pkg_}}
.            if !empty(_BLNK_PKG_SATISFIES_DEP.${_pkg_}:M[yY][eE][sS])
_BLNK_PKG_SATISFIES_DEP.${_pkg_}!=	\
	if ${PKG_ADMIN} pmatch '${_dep_}' ${_dep2pkg_}; then		\
		${ECHO} "YES";						\
	else								\
		${ECHO} "NO";						\
	fi
.            endif
.          endfor
.          if !empty(_BLNK_PKG_SATISFIES_DEP.${_pkg_}:M[yY][eE][sS])
_BLNK_STRICTEST_DEPENDS.${_pkg_}=	${_depend_}
.          endif
.        endif
.      endfor
.    endfor
.    if ${_BLNK_STRICTEST_DEPENDS.${_pkg_}} == "none"
#
# If the dependencies simply conflict, then pass them on through to the
# normal dependency handling code.
#
_BLNK_DEPENDS.${_pkg_}+=	${BUILDLINK_DEPENDS.${_pkg_}}
.    else
.      for _depend_ in ${BUILDLINK_DEPENDS.${_pkg_}}
.        if empty(_BLNK_GE_DEPENDS.${_pkg_}:M${_depend_})
_BLNK_DEPENDS.${_pkg_}+=	${_depend_}
.        endif
.      endfor
_BLNK_DEPENDS.${_pkg_}+=	${_BLNK_STRICTEST_DEPENDS.${_pkg_}}
.    endif
#
# END dependency reduction
#
.    for _depend_ in ${_BLNK_DEPENDS.${_pkg_}}
.      if empty(${_BLNK_DEPMETHOD.${_pkg_}}:M${_depend_}\:*)
${_BLNK_DEPMETHOD.${_pkg_}}+=	${_depend_}:${BUILDLINK_PKGSRCDIR.${_pkg_}}
.      endif
.    endfor
.  endif
.  if defined(BUILDLINK_RECOMMENDED.${_pkg_}) && \
      defined(BUILDLINK_PKGSRCDIR.${_pkg_})
.    for _rec_ in ${BUILDLINK_RECOMMENDED.${_pkg_}}
.      if empty(${_BLNK_RECMETHOD.${_pkg_}}:M${_depend_}\:*)
${_BLNK_RECMETHOD.${_pkg_}}+=	${_rec_}:${BUILDLINK_PKGSRCDIR.${_pkg_}}
.      endif
.    endfor
.  endif
.endfor
.for _depmethod_ in DEPENDS BUILD_DEPENDS RECOMMENDED
.  if !empty(_BLNK_ADD_TO.${_depmethod_})
${_depmethod_}+=	${_BLNK_ADD_TO.${_depmethod_}}
.  endif
.endfor	# _BLNK_DEPENDS_LIST

.if !empty(PHASES_AFTER_BUILDLINK:M${PKG_PHASE})
# Generate default values for:
#
# _BLNK_PKG_DBDIR.<pkg>		contains all of the package metadata
#				files for <pkg>
#
# _BLNK_PKG_INFO.<pkg>		pkg_info(1) with correct dbdir to get
#				information for <pkg>
#
# BUILDLINK_PKGNAME.<pkg>	the name of the package
#
# BUILDLINK_IS_DEPOT.<pkg>	"yes" or "no" for whether <pkg> is a
#				depoted package.
#
# BUILDLINK_PREFIX.<pkg>	contains all of the installed files
#				for <pkg>
#
# BUILDLINK_CFLAGS.<pkg>,
# BUILDLINK_CPPFLAGS.<pkg>,
# BUILDLINK_LDFLAGS.<pkg>	contain extra compiler options, -D..., -I...
#				and -L.../-Wl,-R options to be passed to the
#				compiler/linker so that building against
#				<pkg> will work.
#
# BUILDLINK_INCDIRS.<pkg>,
# BUILDLINK_LIBDIRS.<pkg>,
# BUILDLINK_RPATHDIRS.<pkg>	subdirectories of BUILDLINK_PREFIX.<pkg>
#				that should be added to the
#				compiler/linker search paths; these
#				directories are checked to see if they
#				exist before they're added to the search
#				paths.
#
.for _pkg_ in ${_BLNK_PACKAGES}
#
# If we're using the built-in package, then provide sensible defaults.
#
USE_BUILTIN.${_pkg_}?=		no
.  if !empty(USE_BUILTIN.${_pkg_}:M[yY][eE][sS])
_BLNK_PKG_DBDIR.${_pkg_}?=	_BLNK_PKG_DBDIR.${_pkg_}_not_found
_BLNK_PKG_INFO.${_pkg_}?=	${TRUE}
BUILDLINK_PKGNAME.${_pkg_}?=	${_pkg_}
BUILDLINK_IS_DEPOT.${_pkg_}?=	no
BUILDLINK_PREFIX.${_pkg_}?=	/usr
.  endif
#
# Set a default for _BLNK_PKG_DBDIR.<pkg>, which is the directory
# containing the package metadata.
#
.  if !defined(_BLNK_PKG_DBDIR.${_pkg_})
_BLNK_PKG_DBDIR.${_pkg_}?=	# empty
.    for _depend_ in ${BUILDLINK_DEPENDS.${_pkg_}}
.      if empty(_BLNK_PKG_DBDIR.${_pkg_}:M*not_found)
_BLNK_PKG_DBDIR.${_pkg_}!=	\
	dir="";								\
	if [ -d ${_PKG_DBDIR} ]; then					\
		dir=`cd ${_PKG_DBDIR}; ${PKG_ADMIN} -S lsbest "${_depend_}" || ${TRUE}`; \
	fi;								\
	case "$$dir" in							\
	"")	dir="_BLNK_PKG_DBDIR.${_pkg_}_not_found" ;;		\
	*)	if [ -f $$dir/+DEPOT ]; then				\
			dir=`${HEAD} -1 $$dir/+DEPOT`;			\
		fi ;;							\
	esac;								\
	${ECHO} $$dir
.      endif
.    endfor
.    if empty(_BLNK_PKG_DBDIR.${_pkg_}:M*not_found)
BUILDLINK_VARS+=	_BLNK_PKG_DBDIR.${_pkg_}
.    endif
.  endif

.  if empty(_BLNK_PKG_DBDIR.${_pkg_}:M*not_found)
_BLNK_PKG_INFO.${_pkg_}?=	${PKG_INFO_CMD} -K ${_BLNK_PKG_DBDIR.${_pkg_}:H}
.  else
_BLNK_PKG_INFO.${_pkg_}?=	${PKG_INFO_CMD} -K ${_PKG_DBDIR}
.  endif

BUILDLINK_PKGNAME.${_pkg_}?=	${_BLNK_PKG_DBDIR.${_pkg_}:T}
.  if exists(${_BLNK_PKG_DBDIR.${_pkg_}}/+VIEWS)
BUILDLINK_IS_DEPOT.${_pkg_}?=	yes
.  else
BUILDLINK_IS_DEPOT.${_pkg_}?=	no
.  endif
#
# Set BUILDLINK_PREFIX.<pkg> to the "PREFIX" value for the package.
#
.  if !defined(BUILDLINK_PREFIX.${_pkg_})
.    if !empty(BUILDLINK_IS_DEPOT.${_pkg_}:M[yY][eE][sS])
BUILDLINK_PREFIX.${_pkg_}=	${_BLNK_PKG_DBDIR.${_pkg_}}
.    else
.      if empty(BUILDLINK_PKGNAME.${_pkg_}:M*not_found)
BUILDLINK_PREFIX.${_pkg_}!=	\
	${_BLNK_PKG_INFO.${_pkg_}} -qp ${BUILDLINK_PKGNAME.${_pkg_}} | ${SED}  -e "s,^[^/]*,,;q"
.      else
BUILDLINK_PREFIX.${_pkg_}=	BUILDLINK_PREFIX.${_pkg_}_not_found
.      endif
.    endif
.    if empty(BUILDLINK_PREFIX.${_pkg_}:M*not_found)
BUILDLINK_VARS+=	BUILDLINK_PREFIX.${_pkg_}
.    endif
.  endif

BUILDLINK_CPPFLAGS.${_pkg_}?=	# empty
BUILDLINK_LDFLAGS.${_pkg_}?=	# empty
BUILDLINK_INCDIRS.${_pkg_}?=	include
BUILDLINK_LIBDIRS.${_pkg_}?=	lib
.  if !empty(BUILDLINK_DEPMETHOD.${_pkg_}:Mfull)
BUILDLINK_RPATHDIRS.${_pkg_}?=	${BUILDLINK_LIBDIRS.${_pkg_}}
.  else
BUILDLINK_RPATHDIRS.${_pkg_}?=	# empty
.  endif
.endfor

# BUILDLINK_CPPFLAGS and BUILDLINK_LDFLAGS contain the proper -I...
# and -L.../-Wl,-R... options to be passed to the compiler and linker
# to find the headers and libraries for the various packages at
# configure/build time.  BUILDLINK_CFLAGS contains any special compiler
# options needed when building against the various packages.
#
BUILDLINK_CPPFLAGS=	# empty
BUILDLINK_LDFLAGS=	# empty
BUILDLINK_CFLAGS=	# empty

.for _pkg_ in ${_BLNK_PACKAGES}
.  for _flag_ in ${BUILDLINK_CPPFLAGS.${_pkg_}}
.    if empty(BUILDLINK_CPPFLAGS:M${_flag_})
BUILDLINK_CPPFLAGS+=	${_flag_}
.    endif
.  endfor
.  for _flag_ in ${BUILDLINK_LDFLAGS.${_pkg_}}
.    if empty(BUILDLINK_LDFLAGS:M${_flag_})
BUILDLINK_LDFLAGS+=	${_flag_}
.    endif
.  endfor
.  for _flag_ in ${BUILDLINK_CFLAGS.${_pkg_}}
.    if empty(BUILDLINK_CFLAGS:M${_flag_})
BUILDLINK_CFLAGS+=	${_flag_}
.    endif
.  endfor
.  if !empty(BUILDLINK_INCDIRS.${_pkg_})
.    for _dir_ in ${BUILDLINK_INCDIRS.${_pkg_}:S/^/${BUILDLINK_PREFIX.${_pkg_}}\//}
.      if exists(${_dir_})
.        if empty(BUILDLINK_CPPFLAGS:M-I${_dir_})
BUILDLINK_CPPFLAGS+=	-I${_dir_}
.        endif
.      endif
.    endfor
.  endif
.  if !empty(BUILDLINK_LIBDIRS.${_pkg_})
.    for _dir_ in ${BUILDLINK_LIBDIRS.${_pkg_}:S/^/${BUILDLINK_PREFIX.${_pkg_}}\//}
.      if exists(${_dir_})
.        if empty(BUILDLINK_LDFLAGS:M-L${_dir_})
BUILDLINK_LDFLAGS+=	-L${_dir_}
.        endif
.      endif
.    endfor
.  endif
.  if !empty(BUILDLINK_RPATHDIRS.${_pkg_}) && (${_USE_RPATH} == "yes")
.    for _dir_ in ${BUILDLINK_RPATHDIRS.${_pkg_}:S/^/${BUILDLINK_PREFIX.${_pkg_}}\//}
.      if exists(${_dir_})
.        if empty(BUILDLINK_LDFLAGS:M${_COMPILER_LD_FLAG}${RPATH_FLAG}${_dir_})
BUILDLINK_LDFLAGS+=	${_COMPILER_LD_FLAG}${RPATH_FLAG}${_dir_}
.        endif
.      endif
.    endfor
.  endif
.endfor
#
# Add the depot directory library directory for this package to the
# runtime library search path.
#
.if ${PKG_INSTALLATION_TYPE} == "pkgviews"
.  if (${_USE_RPATH} == "yes") && \
      empty(BUILDLINK_LDFLAGS:M${_COMPILER_LD_FLAG}${RPATH_FLAG}${PREFIX}/lib)
BUILDLINK_LDFLAGS+=	${_COMPILER_LD_FLAG}${RPATH_FLAG}${PREFIX}/lib
.  endif
.endif
#
# Add the default view library directories to the runtime library search
# path so that wildcard dependencies on library packages can always be
# fulfilled through the default view.
#
.for _pkg_ in ${_BLNK_PACKAGES}
.  if !empty(BUILDLINK_RPATHDIRS.${_pkg_}) && (${_USE_RPATH} == "yes")
.    for _dir_ in ${BUILDLINK_RPATHDIRS.${_pkg_}:S/^/${LOCALBASE}\//}
.      if exists(${_dir_})
.        if empty(BUILDLINK_LDFLAGS:M${_COMPILER_LD_FLAG}${RPATH_FLAG}${_dir_})
BUILDLINK_LDFLAGS+=	${_COMPILER_LD_FLAG}${RPATH_FLAG}${_dir_}
.        endif
.      endif
.    endfor
.  endif
.endfor
#
# Ensure that ${LOCALBASE}/lib is in the runtime library search path.
#
.if (${_USE_RPATH} == "yes") && \
    empty(BUILDLINK_LDFLAGS:M${_COMPILER_LD_FLAG}${RPATH_FLAG}${LOCALBASE}/lib)
BUILDLINK_LDFLAGS+=	${_COMPILER_LD_FLAG}${RPATH_FLAG}${LOCALBASE}/lib
.endif
#
# Add the X11 library directory to the library search paths if the package
# uses X11.
#
.if defined(USE_X11)
.  if empty(BUILDLINK_LDFLAGS:M-L${X11BASE}/lib)
BUILDLINK_LDFLAGS+=	-L${X11BASE}/lib
.  endif
.  if (${_USE_RPATH} == "yes") && \
      empty(BUILDLINK_LDFLAGS:M${_COMPILER_LD_FLAG}${RPATH_FLAG}${X11BASE}/lib)
BUILDLINK_LDFLAGS+=	${_COMPILER_LD_FLAG}${RPATH_FLAG}${X11BASE}/lib
.  endif
.endif

.for _flag_ in ${BUILDLINK_CFLAGS}
.  if empty(CFLAGS:M${_flag_})
CFLAGS+=	${_flag_}
.  endif
.  if empty(CXXFLAGS:M${_flag_})
CXXFLAGS+=	${_flag_}
.  endif
.endfor
.for _flag_ in ${BUILDLINK_CPPFLAGS}
.  if empty(CPPFLAGS:M${_flag_})
CPPFLAGS+=	${_flag_}
.  endif
#
# We add BUILDLINK_CPPFLAGS to both CFLAGS and CXXFLAGS since much software
# ignores the value of CPPFLAGS that we set in the environment.
#
.  if empty(CFLAGS:M${_flag_})
CFLAGS+=	${_flag_}
.  endif
.  if empty(CXXFLAGS:M${_flag_})
CXXFLAGS+=	${_flag_}
.  endif
.endfor
.for _flag_ in ${BUILDLINK_LDFLAGS}
.  if empty(LDFLAGS:M${_flag_})
LDFLAGS+=	${_flag_}
.  endif
.endfor

# Create the buildlink include and lib directories so that the Darwin
# compiler/linker won't complain verbosely (on stdout, even!) when
# those directories are passed as sub-arguments of -I and -L.
#
.PHONY: buildlink-directories
do-buildlink: buildlink-directories
buildlink-directories:
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${BUILDLINK_DIR}
.if defined(USE_X11)
	${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${BUILDLINK_X11_DIR}
	${_PKG_SILENT}${_PKG_DEBUG}${LN} -sf ${BUILDLINK_DIR} ${BUILDLINK_X11_DIR}
.endif
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${BUILDLINK_DIR}/include
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${BUILDLINK_DIR}/lib

# Create the saved variables Makefile fragment to pass variables through
# to sub-make processes invoked on the same Makefile.
#
do-buildlink: ${_BLNK_VARS_MK}

# Create the buildlink wrappers before any of the other buildlink targets
# are run, as the wrappers may need to be used in some of those targets.
#
do-buildlink: buildlink-wrappers buildlink-${_BLNK_OPSYS}-wrappers

# The following variables are all optionally defined and control which
# package files are symlinked into ${BUILDLINK_DIR} and how their names
# are transformed during the symlinking:
#
# BUILDLINK_FILES.<pkg>
#	shell glob pattern relative to ${BUILDLINK_PREFIX.<pkg>} to be
#	symlinked into ${BUILDLINK_DIR}, e.g. include/*.h
#
# BUILDLINK_FILES_CMD.<pkg>
#	shell pipeline that outputs to stdout a list of files relative
#	to ${BUILDLINK_PREFIX.<pkg>}.  The resulting files are to be
#	symlinked into ${BUILDLINK_DIR}.  By default, this takes the
#	+CONTENTS of a <pkg> and filters it through
#	${BUILDLINK_CONTENTS_FILTER.<pkg>}.
#
# BUILDLINK_CONTENTS_FILTER.<pkg>
#	filter command that filters +CONTENTS input into a list of files
#	relative to ${BUILDLINK_PREFIX.<pkg>} on stdout.  By default for
#	overwrite packages, BUILDLINK_CONTENTS_FILTER.<pkg> outputs the
#	contents of the include and lib directories in the package
#	+CONTENTS, and for pkgviews packages, it outputs any libtool
#	archives in lib directories.
#
# BUILDLINK_TRANSFORM.<pkg>
#	sed arguments used to transform the name of the source filename
#	into a destination filename, e.g. -e "s|/curses.h|/ncurses.h|g"
#
.for _pkg_ in ${_BLNK_PACKAGES}
_BLNK_COOKIE.${_pkg_}=		${BUILDLINK_DIR}/.buildlink_${_pkg_}_done

_BLNK_TARGETS+=			buildlink-${_pkg_}
_BLNK_TARGETS.${_pkg_}=		buildlink-${_pkg_}-message
_BLNK_TARGETS.${_pkg_}+=	${_BLNK_COOKIE.${_pkg_}}
_BLNK_TARGETS.${_pkg_}+=	buildlink-${_pkg_}-cookie

.ORDER: ${_BLNK_TARGETS.${_pkg_}}

.PHONY: buildlink-${_pkg_}
buildlink-${_pkg_}: ${_BLNK_TARGETS.${_pkg_}}

.PHONY: buildlink-${_pkg_}-message
buildlink-${_pkg_}-message:
	${_PKG_SILENT}${_PKG_DEBUG}					\
	${ECHO_BUILDLINK_MSG} "=> Linking ${_pkg_} files into ${BUILDLINK_DIR}."

.PHONY: buildlink-${_pkg_}-cookie
buildlink-${_pkg_}-cookie:
	${_PKG_SILENT}${_PKG_DEBUG}					\
	${TOUCH} ${TOUCH_FLAGS} ${_BLNK_COOKIE.${_pkg_}}

.  if (${PKG_INSTALLATION_TYPE} == "pkgviews") &&			\
      !empty(BUILDLINK_IS_DEPOT.${_pkg_}:M[yY][eE][sS])
BUILDLINK_CONTENTS_FILTER.${_pkg_}?=					\
	${EGREP} 'lib(/pkgconfig/.*\.pc$$|.*/lib[^/]*\.la$$)'
.  else
BUILDLINK_CONTENTS_FILTER.${_pkg_}?=					\
	${EGREP} '(include.*/|\.h$$|\.idl$$|\.pc$$|/lib[^/]*\.[^/]*$$)'
.  endif
BUILDLINK_FILES_CMD.${_pkg_}?=						\
	${_BLNK_PKG_INFO.${_pkg_}} -f ${BUILDLINK_PKGNAME.${_pkg_}} |	\
	${SED} -n '/File:/s/^[ 	]*File:[ 	]*//p' |		\
	${BUILDLINK_CONTENTS_FILTER.${_pkg_}}

# _BLNK_FILES_CMD.<pkg> combines BUILDLINK_FILES_CMD.<pkg> and
# BUILDLINK_FILES.<pkg> into one command that outputs all of the files
# for <pkg> relative to ${BUILDLINK_PREFIX.<pkg>}.
#
_BLNK_FILES_CMD.${_pkg_}=	(
_BLNK_FILES_CMD.${_pkg_}+=	${BUILDLINK_FILES_CMD.${_pkg_}};
.for _filepattern_ in ${BUILDLINK_FILES.${_pkg_}}
_BLNK_FILES_CMD.${_pkg_}+=	${LS} -1 ${_filepattern_} 2>/dev/null || ${TRUE};
.endfor
_BLNK_FILES_CMD.${_pkg_}+=	)
_BLNK_FILES_CMD.${_pkg_}+=	| ${SORT} -u

${_BLNK_COOKIE.${_pkg_}}:
	${_PKG_SILENT}${_PKG_DEBUG}					\
	case ${BUILDLINK_PREFIX.${_pkg_}} in				\
	*not_found)							\
		${ECHO} "${_pkg_} is not installed; can't buildlink files."; \
		${FALSE};						\
		;;							\
	esac
	${_PKG_SILENT}${_PKG_DEBUG}					\
	case ${BUILDLINK_PREFIX.${_pkg_}} in				\
	${X11BASE})     buildlink_dir="${BUILDLINK_X11_DIR}" ;;		\
	*)              buildlink_dir="${BUILDLINK_DIR}" ;;		\
	esac;								\
	cd ${BUILDLINK_PREFIX.${_pkg_}};				\
	${_BLNK_FILES_CMD.${_pkg_}} |					\
	while read file; do						\
		src="${BUILDLINK_PREFIX.${_pkg_}}/$$file";		\
		if [ ! -f $$src ]; then					\
			msg="$$src: not found";				\
		else							\
			if [ -z "${BUILDLINK_TRANSFORM.${_pkg_}:Q}" ]; then \
				dest="$$buildlink_dir/$$file";		\
				msg="$$src";				\
			else						\
				dest="$$buildlink_dir/$$file";		\
				dest=`${ECHO} $$dest | ${SED} ${BUILDLINK_TRANSFORM.${_pkg_}}`; \
				msg="$$src -> $$dest";			\
			fi;						\
			dir=`${DIRNAME} $$dest`;			\
			if [ ! -d $$dir ]; then				\
				${MKDIR} $$dir;				\
			fi;						\
			${RM} -f $$dest;				\
			case $$src in					\
			*.la)						\
				${CAT} $$src |				\
				${_BLNK_LT_ARCHIVE_FILTER.${_pkg_}}	\
					> $$dest;			\
				msg="$$msg (created)";			\
				;;					\
			*)						\
				${LN} -sf $$src $$dest;			\
				;;					\
			esac;						\
		fi;							\
		${ECHO} "$$msg" >> ${.TARGET};				\
	done

# _BLNK_LT_ARCHIVE_FILTER.${_pkg_} is a command-line filter used in
# the previous target for transforming libtool archives (*.la) to
# allow libtool to properly interact with # buildlink at link time by
# linking against the libraries pointed to by symlinks in
# ${BUILDLINK_DIR}.
#
_BLNK_LT_ARCHIVE_FILTER.${_pkg_}=	\
	${SED} ${_BLNK_LT_ARCHIVE_FILTER_SED_SCRIPT.${_pkg_}}

_BLNK_SEP=	\ \`\"':;,
_BLNK_LT_ARCHIVE_FILTER_SED_SCRIPT.${_pkg_}=	# empty
#
#     -	Modify the dependency_libs line by changing all full paths to
#	other *.la files into the canonical ${BUILDLINK_DIR} path.
#
_BLNK_LT_ARCHIVE_FILTER_SED_SCRIPT.${_pkg_}+=				\
	-e "/^dependency_libs=/s,/usr\(/lib/lib[^/${_BLNK_SEP}]*\.la\),${BUILDLINK_DIR}\\1,g" \
	-e "/^dependency_libs=/s,${DEPOTBASE}/[^${_BLNK_SEP}]*\(/[^${_BLNK_SEP}]*/lib[^/${_BLNK_SEP}]*\.la\),${BUILDLINK_DIR}\\1,g" \
	-e "/^dependency_libs=/s,${X11BASE}\(/[^${_BLNK_SEP}]*/lib[^/${_BLNK_SEP}]*\.la\),${BUILDLINK_X11_DIR}\\1,g" \
	-e "/^dependency_libs=/s,${LOCALBASE}\(/[^${_BLNK_SEP}]*/lib[^/${_BLNK_SEP}]*\.la\),${BUILDLINK_DIR}\\1,g" \
	-e "/^dependency_libs=/s,-L/usr/lib[^/${_BLNK_SEP}]*[ 	]*,,g"	\
	-e "/^dependency_libs=/s,-L${X11BASE}/[^${_BLNK_SEP}]*[ 	]*,,g" \
	-e "/^dependency_libs=/s,-L${LOCALBASE}/[^${_BLNK_SEP}]*[ 	]*,,g"
.  if (${PKG_INSTALLATION_TYPE} == "overwrite") ||			\
      !empty(BUILDLINK_IS_DEPOT.${_pkg_}:M[nN][oO])
#
#     -	Modify the libdir line to point to within ${BUILDLINK_DIR}.
#	This prevents libtool from looking into the original directory
#	for other *.la files.
#
_BLNK_LT_ARCHIVE_FILTER_SED_SCRIPT.${_pkg_}+=				\
	-e "/^libdir=/s,/usr\(/lib/[^${_BLNK_SEP}]*\),${BUILDLINK_DIR}\\1,g" \
	-e "/^libdir=/s,${DEPOTBASE}/[^/${_BLNK_SEP}]*\(/[^${_BLNK_SEP}]*\),${BUILDLINK_DIR}\\1,g" \
	-e "/^libdir=/s,${X11BASE}\(/[^${_BLNK_SEP}]*\),${BUILDLINK_X11_DIR}\\1,g" \
	-e "/^libdir=/s,${LOCALBASE}\(/[^${_BLNK_SEP}]*\),${BUILDLINK_DIR}\\1,g"
.  endif
.endfor

# Include any BUILDLINK_TARGETS provided in buildlink3.mk files in
# _BLNK_TARGETS.
#
_BLNK_TARGETS+=	${BUILDLINK_TARGETS}

# Add each of the targets in _BLNK_TARGETS as a prerequisite for the
# do-buildlink target.  This ensures that all the buildlink magic happens
# before any configure or build commands are called.
#
.for _target_ in ${_BLNK_TARGETS}
do-buildlink: ${_target_}
.endfor

# The configure process usually tests for outlandish or missing things
# that we don't want polluting the argument cache.
#
CONFIGURE_ENV+=		BUILDLINK_UPDATE_CACHE=no

# There are three different parts we can add to the common transforming
# cache to speed things up:
#
#	passthru	automatically accept certain options without
#			further checking
#
#	transform	change -[IL]{${X11BASE},${LOCALBASE},${DEPOTBASE}/*}
#			to the correct ${BUILDLINK_DIR} reference
#
#	block		block certain options without further checking
#
# Seeding the cache appropriately lets us handle large classes of options
# without having to go through the wrapper logic file, which generates
# a cache hit for every single option and bloats the cache quite bit more.
#
_BLNK_SEED_CACHE?=	passthru # transform block

# The caching code, which greatly speeds up the build process, doesn't
# work completely correctly on certain platforms.
#
_BLNK_PARTIAL_CACHE_ONLY=	Darwin-5.*-*

_BLNK_FULL_CACHING?=	YES
.for _pattern_ in ${_BLNK_PARTIAL_CACHE_ONLY}
.  if !empty(MACHINE_PLATFORM:M${_pattern_})
_BLNK_FULL_CACHING=	NO
.  endif
.endfor
.if !empty(_BLNK_FULL_CACHING:M[yY][eE][sS])
CONFIGURE_ENV+=		BUILDLINK_CACHE_ALL=yes
MAKE_ENV+=		BUILDLINK_CACHE_ALL=yes
.endif

# _BLNK_PASSTHRU_DIRS contains the list of directories which we allow in
#	preprocessor's header, linker's library, or the runtime library
#	search paths.  The values of this list represent entire directory
#	trees under each named directory.  Package makefiles may add to
#	its value through ${BUILDLINK_PASSTHRU_DIRS}.
#
# _BLNK_PASSTHRU_RPATHDIRS contains an extra list of directories which we
#	allow in the runtime library search paths.  Package makefiles may
#	add to its value through ${BUILDLINK_PASSTHRU_RPATHDIRS}.
#
_BLNK_PASSTHRU_DIRS=		# empty
_BLNK_PASSTHRU_RPATHDIRS=	# empty
#
# Allow all of the depot directories for packages whose headers and
# libraries we use.
#
.for _pkg_ in ${_BLNK_PACKAGES}
.  if !empty(BUILDLINK_IS_DEPOT.${_pkg_}:M[yY][eE][sS])
_BLNK_PASSTHRU_DIRS+=	${BUILDLINK_PREFIX.${_pkg_}}
.  endif
.endfor
#
# Allow the depot directory for the package we're building.
#
.if ${PKG_INSTALLATION_TYPE} == "pkgviews"
_BLNK_PASSTHRU_DIRS+=	${PREFIX}
.endif
#
# Allow any directories specified by the package or user.
#
_BLNK_PASSTHRU_DIRS+=	${BUILDLINK_PASSTHRU_DIRS}
#
# Strip out /usr, /usr/include, and /usr/lib as they're always
# automatically added to all of the search paths.  Also strip out
# ${LOCALBASE} and ${X11BASE} to prevent silly mistakes.
#
_BLNK_PASSTHRU_DIRS:=	${_BLNK_PASSTHRU_DIRS:N/usr:N/usr/lib:N/usr/include:N${LOCALBASE}:N${X11BASE}}
#
# Allow all directories in the library subdirectories listed for each
# package to be in the runtime library search path.
#
.for _pkg_ in ${_BLNK_PACKAGES}
.  if !empty(BUILDLINK_IS_DEPOT.${_pkg_}:M[nN][oO])
.    if !empty(BUILDLINK_LIBDIRS.${_pkg_})
.      for _dir_ in ${BUILDLINK_LIBDIRS.${_pkg_}}
.        if exists(${BUILDLINK_PREFIX.${_pkg_}}/${_dir_})
_BLNK_PASSTHRU_RPATHDIRS+=	${BUILDLINK_PREFIX.${_pkg_}}/${_dir_}
.        endif
.      endfor
.    endif
.  endif
.endfor
#
# Always allow ${LOCALBASE}/lib in the runtime library search path so
# that wildcard dependencies work correctly when installing from binary
# packages.
#
_BLNK_PASSTHRU_RPATHDIRS+=	${LOCALBASE}/lib
#
# Allow ${X11BASE}/lib in the runtime library search path for USE_X11
# packages so that X11 libraries can be found.
#
.if defined(USE_X11)
_BLNK_PASSTHRU_RPATHDIRS+=	${X11BASE}/lib
.endif
#
# Allow any directories specified by the package or user.
#
_BLNK_PASSTHRU_RPATHDIRS+=	${BUILDLINK_PASSTHRU_RPATHDIRS}
#
# Strip out /usr/lib as it's always automatically in the runtime library
# search path.
#
_BLNK_PASSTHRU_RPATHDIRS:=	${_BLNK_PASSTHRU_RPATHDIRS:N/usr/lib}

_BLNK_MANGLE_DIRS=	# empty
_BLNK_MANGLE_DIRS+=	${BUILDLINK_DIR}
_BLNK_MANGLE_DIRS+=	${BUILDLINK_X11_DIR}
_BLNK_MANGLE_DIRS+=	${WRKDIR}
_BLNK_MANGLE_DIRS+=	${_BLNK_PASSTHRU_DIRS}
_BLNK_MANGLE_DIRS+=	${_BLNK_PASSTHRU_RPATHDIRS}
_BLNK_MANGLE_DIRS+=	/usr/include
_BLNK_MANGLE_DIRS+=	/usr/lib
.if ${PKG_INSTALLATION_TYPE} == "pkgviews"
_BLNK_MANGLE_DIRS+=	${PREFIX}
.endif
_BLNK_MANGLE_DIRS+=	${LOCALBASE}
.if defined(USE_X11)
_BLNK_MANGLE_DIRS+=	${X11BASE}
.endif

_BLNK_MANGLE_START=	_bUiLdLiNk_
_BLNK_MANGLE_END=	\#
.for _dir_ in ${_BLNK_MANGLE_DIRS}
_BLNK_MANGLE_DIR.${_dir_}=	\
	${_BLNK_MANGLE_START}${_dir_:S/\//_/g}${_BLNK_MANGLE_END}
.endfor
_BLNK_MANGLE_SED_PATTERN=	\
	${_BLNK_MANGLE_START}[^/ 	${_BLNK_MANGLE_END}]*${_BLNK_MANGLE_END}

_BLNK_PROTECT_DIRS=	# empty
_BLNK_UNPROTECT_DIRS=	# empty

_BLNK_PROTECT_DIRS+=	${BUILDLINK_DIR}
_BLNK_PROTECT_DIRS+=	${BUILDLINK_X11_DIR}
_BLNK_PROTECT_DIRS+=	${WRKDIR}
_BLNK_PROTECT_DIRS+=	${_BLNK_PASSTHRU_DIRS}

_BLNK_UNPROTECT_DIRS+=	/usr/include
_BLNK_UNPROTECT_DIRS+=	/usr/lib
.if ${PKG_INSTALLATION_TYPE} == "pkgviews"
_BLNK_UNPROTECT_DIRS+=	${PREFIX}
.endif
_BLNK_UNPROTECT_DIRS+=	${LOCALBASE}
.if defined(USE_X11)
_BLNK_UNPROTECT_DIRS+=	${X11BASE}
.endif
_BLNK_UNPROTECT_DIRS+=	${_BLNK_PASSTHRU_DIRS}
_BLNK_UNPROTECT_DIRS+=	${WRKDIR}
_BLNK_UNPROTECT_DIRS+=	${BUILDLINK_X11_DIR}
_BLNK_UNPROTECT_DIRS+=	${BUILDLINK_DIR}

# Resolve some important directories to their phyiscal paths as symlinks
# tend to confuse buildlink3.
#
_BLNK_PHYSICAL_PATH_VARS?=	WRKDIR LOCALBASE
.for _var_ in ${_BLNK_PHYSICAL_PATH_VARS}
.  if !defined(_BLNK_PHYSICAL_PATH.${_var_})
_BLNK_PHYSICAL_PATH.${_var_}!=						\
	if [ -d ${${_var_}} ]; then					\
		cd ${${_var_}}; ${PWD_CMD};				\
	else								\
		${ECHO} ${${_var_}};					\
	fi
BUILDLINK_VARS+=	_BLNK_PHYSICAL_PATH.${_var_}
.  endif
.endfor

# Transform all references to the physical paths to some important
# directories into their given names.
#
.for _var_ in ${_BLNK_PHYSICAL_PATH_VARS}
.  if (${_BLNK_PHYSICAL_PATH.${_var_}} != ${${_var_}}) && \
      empty(${_var_}:M${_BLNK_PHYSICAL_PATH.${_var_}}/*)
_BLNK_TRANSFORM+=	mangle:${_BLNK_PHYSICAL_PATH.${_var_}}:${${_var_}}
.  endif
.endfor
#
# Protect work directories and the dependency directories from all the
# transformations we're about to do.
#
.for _dir_ in ${_BLNK_PROTECT_DIRS}
_BLNK_TRANSFORM+=	mangle:${_dir_}:${_BLNK_MANGLE_DIR.${_dir_}}
.endfor
#
# Protect -I/usr/include/* and -L/usr/lib/* from transformations (these
# aren't part of the normal header or library search paths).
#
_BLNK_TRANSFORM+=	sub-mangle:-I/usr/include:-I${_BLNK_MANGLE_DIR./usr/include}
_BLNK_TRANSFORM+=	sub-mangle:-L/usr/lib:-L${_BLNK_MANGLE_DIR./usr/lib}
#
# Change any buildlink directories in runtime library search paths into
# the canonical actual installed paths.
#
_BLNK_TRANSFORM+=	rpath:${_BLNK_MANGLE_DIR.${BUILDLINK_DIR}}:${LOCALBASE}
.if defined(USE_X11)
_BLNK_TRANSFORM+=	rpath:${_BLNK_MANGLE_DIR.${BUILDLINK_X11_DIR}}:${X11BASE}
.endif
#
# Protect some directories that we allow to be specified for the runtime
# library search path.
#
.for _dir_ in ${_BLNK_PASSTHRU_DIRS} ${_BLNK_PASSTHRU_RPATHDIRS}
_BLNK_TRANSFORM+=	rpath:${_dir_}:${_BLNK_MANGLE_DIR.${_dir_}}
.endfor
#
# Protect /usr/lib/* as they're all allowed to be specified for the
# runtime library search path.
#
_BLNK_TRANSFORM+=	sub-rpath:/usr/lib:${_BLNK_MANGLE_DIR./usr/lib}
#
# Change references to ${DEPOTBASE}/<pkg> into ${LOCALBASE} so that
# "overwrite" packages think headers and libraries for "pkgviews" packages
# are just found in the default view.
#
.if ${PKG_INSTALLATION_TYPE} == "overwrite"
_BLNK_TRANSFORM+=	depot:${DEPOTBASE}:${LOCALBASE}
.endif
#
# Convert direct paths to shared libraries into "-Ldir -llib" equivalents.
#
_BLNK_TRANSFORM+=	p:${_BLNK_MANGLE_SED_PATTERN:Q}
_BLNK_TRANSFORM+=	p:
#
# Convert direct paths to static libraries and libtool archives in
# ${LOCALBASE} or ${X11BASE} into references into ${BUILDLINK_DIR}.
#
.if ${PKG_INSTALLATION_TYPE} == "overwrite"
.  if defined(USE_X11)
_BLNK_TRANSFORM+=	P:${X11BASE}:${_BLNK_MANGLE_DIR.${BUILDLINK_X11_DIR}}
.  endif
_BLNK_TRANSFORM+=	P:${LOCALBASE}:${_BLNK_MANGLE_DIR.${BUILDLINK_DIR}}
.endif
#
# Transform references into ${X11BASE} into ${BUILDLINK_X11_DIR}.
#
.if defined(USE_X11)
_BLNK_TRANSFORM+=       I:${X11BASE}:${_BLNK_MANGLE_DIR.${BUILDLINK_X11_DIR}}
_BLNK_TRANSFORM+=       L:${X11BASE}:${_BLNK_MANGLE_DIR.${BUILDLINK_X11_DIR}}
.endif
#
# Transform references into ${LOCALBASE} into ${BUILDLINK_DIR}.
#
.if ${PKG_INSTALLATION_TYPE} == "overwrite"
_BLNK_TRANSFORM+=	I:${LOCALBASE}:${_BLNK_MANGLE_DIR.${BUILDLINK_DIR}}
_BLNK_TRANSFORM+=	L:${LOCALBASE}:${_BLNK_MANGLE_DIR.${BUILDLINK_DIR}}
.endif
#
# Protect any remaining references to ${PREFIX}, ${LOCALBASE}, or ${X11BASE}.
#
.if ${PKG_INSTALLATION_TYPE} == "pkgviews"
_BLNK_TRANSFORM+=	untransform:sub-mangle:${PREFIX}:${_BLNK_MANGLE_DIR.${PREFIX}}
.endif
_BLNK_TRANSFORM+=	untransform:sub-mangle:${LOCALBASE}:${_BLNK_MANGLE_DIR.${LOCALBASE}}
.if defined(USE_X11)
_BLNK_TRANSFORM+=	untransform:sub-mangle:${X11BASE}:${_BLNK_MANGLE_DIR.${X11BASE}}
.endif
#
# Add any package specified transformations (l:, etc.)
#
_BLNK_TRANSFORM+=	${BUILDLINK_TRANSFORM}
#
# Explicitly remove everything else that's an absolute path, since we've
# already protected the ones we care about.
#
_BLNK_TRANSFORM+=       r:/
#
# Remove -Wl,-R* and *-rpath* if _USE_RPATH == "no".
# Transform -Wl,-R* and *-rpath* if Sun compilers are used.
#
.if defined(_USE_RPATH) && !empty(_USE_RPATH:M[nN][oO])
_BLNK_TRANSFORM+=       no-rpath
.endif
#
# Remove rpath options that try to add relative paths to the runtime
# library search path.  This basically partly cleans up after lazy
# programmers.
#
_BLNK_TRANSFORM+=	abs-rpath
#
# Undo the protection for the directories that we allow to be specified
# for the runtime library search path.
#
.for _dir_ in ${_BLNK_PASSTHRU_DIRS} ${_BLNK_PASSTHRU_RPATHDIRS}
_BLNK_TRANSFORM+=	rpath:${_BLNK_MANGLE_DIR.${_dir_}}:${_dir_}
.endfor
#
# Undo the protection so the correct directory names are passed to the
# the wrappee.
#
.for _dir_ in ${_BLNK_UNPROTECT_DIRS}
_BLNK_TRANSFORM+=	mangle:${_BLNK_MANGLE_DIR.${_dir_}}:${_dir_}
.endfor

# Only do the (expensive) reordering step if we have reordering
# transformations.
#
.if !empty(_BLNK_TRANSFORM:Mreorder\:*)
MAKE_ENV+=	BUILDLINK_REORDER=yes
.endif

_BLNK_TRANSFORM_SED+=	-f ${_BLNK_TRANSFORM_SEDFILE}
_BLNK_UNTRANSFORM_SED+=	-f ${_BLNK_UNTRANSFORM_SEDFILE}

# UNBUILDLINK_PATTERNS and UNBUILDLINK_FILES list shell globs and files
# relative to ${WRKSRC} that need to have reference to ${BUILDLINK_DIR}
# stripped out of them.
#
UNBUILDLINK_PATTERNS?=		# empty
_UNBUILDLINK_PATTERNS=		${UNBUILDLINK_PATTERNS}
_UNBUILDLINK_PATTERNS+=		*-config
_UNBUILDLINK_PATTERNS+=		*Conf.sh
_UNBUILDLINK_PATTERNS+=		*.pc
_UNBUILDLINK_PATTERNS_FIND=	\
	\( ${_UNBUILDLINK_PATTERNS:S/$/!/:S/^/-o -name !/:S/!/"/g:S/-o//1} \)
UNBUILDLINK_FILES?=		# empty
_UNBUILDLINK_FILES=		\
	${UNBUILDLINK_FILES}	\
	`${FIND} . ${_UNBUILDLINK_PATTERNS_FIND} -print | ${SED} -e 's|^\./||' | ${SORT} -u`
#
# When "unbuildlinkifying" a file, we must remove references to the
# buildlink directories and change any -llib to the proper replacement
# libraries (-lreadline -> -ledit, etc.).  Redundant -Idir and -Ldir
# options are removed to optimize the resulting file.  Also, prefer the
# .la files in ${LOCALBASE}/lib over the ones in ${DEPOTBASE}/*/lib when
# creating new .la files.  This makes "overwrite" packages look and feel
# more like they would without the pkgviews integration.
#
UNBUILDLINK_SED?=		# empty
_UNBUILDLINK_SED=		${UNBUILDLINK_SED}
_UNBUILDLINK_SED+=		${_BLNK_UNTRANSFORM_SED}

SUBST_CLASSES+=			unbuildlink
SUBST_STAGE.unbuildlink=	post-build
SUBST_MESSAGE.unbuildlink=	\
	"Fixing buildlink references in files-to-be-installed."
SUBST_FILES.unbuildlink=	${_UNBUILDLINK_FILES}
SUBST_SED.unbuildlink=		${_UNBUILDLINK_SED}

# Generate wrapper scripts for the compiler tools that sanitize the
# argument list by converting references to ${LOCALBASE} and ${X11BASE}
# into references to ${BUILDLINK_DIR} and ${BUILDLINK_X11_DIR}. These
# wrapper scripts are to be used instead of the actual compiler tools when
# building software.
#
# BUILDLINK_CC, BUILDLINK_LD, etc. are the full paths to the wrapper
#       scripts.
#
# ALIASES.CC, ALIASES.LD, etc. are the other names by which each wrapper
#       may be invoked.
#
_BLNK_WRAPPEES+=	AS
_BLNK_WRAPPEES+=	CC
_BLNK_WRAPPEES+=	CPP
_BLNK_WRAPPEES+=	CXX
_BLNK_WRAPPEES+=	LD
_BLNK_WRAPPEES+=	FC
_BLNK_WRAPPEES+=	LIBTOOL SHLIBTOOL
.if defined(USE_LIBTOOL)
_LIBTOOL=		${BUILDLINK_LIBTOOL}
_SHLIBTOOL=		${BUILDLINK_SHLIBTOOL}
.endif
.if defined(USE_X11)
IMAKE?=			${X11BASE}/bin/imake
_BLNK_WRAPPEES+=	IMAKE
.endif
_ALIASES.AS=		as
_ALIASES.CC=		cc gcc
_ALIASES.CXX=		c++ g++ CC
_ALIASES.CPP=		cpp
_ALIASES.FC=		f77 g77
_ALIASES.LD=		ld

# _BLNK_WRAP_*.<wrappee> variables represent "template methods" of the
# wrapper script that may be customized per wrapper:
#
# _BLNK_WRAP_{*CACHE*,*LOGIC*}.<wrappee> are parts of the wrapper script
#	system as described in pkgsrc/mk/buildlink3/README.  The files not
#	ending in "-trans" represent pieces of the wrapper script that may
#	be used to form a wrapper that doesn't translate its arguments,
#	and conversely for the files ending in "-trans".  By default, all
#	wrappers use the "-trans" scripts.
#
# _BLNK_WRAP_ENV.<wrappee> consists of shell commands to export a shell
#	environment for the wrappee.
#
# _BLNK_WRAP_SANITIZE_PATH.<wrappee> sets the PATH for calling executables
#	from within the wrapper.  By default, it removes the buildlink
#	directory from the PATH so that sub-invocations of compiler tools
#	will use the wrappees instead of the wrappers.
#
_BLNK_SANITIZED_PATH!=	${ECHO} ${PATH} | ${SED}			\
	-e "s|:${BUILDLINK_DIR}[^:]*||" -e "s|${BUILDLINK_DIR}[^:]*:||"
_BLNK_WRAP_SANITIZE_PATH=	PATH="${_BLNK_SANITIZED_PATH}"
_BLNK_EMPTY_FILE?=		${BUILDLINK_DIR}/bin/.empty
_BLNK_WRAP_ENV?=		${BUILDLINK_WRAPPER_ENV}
_BLNK_WRAP_BUILDCMD=		${BUILDLINK_DIR}/bin/.buildcmd
_BLNK_WRAP_QUOTEARG=		${BUILDLINK_DIR}/bin/.quotearg
_BLNK_WRAP_BUFFER=		${BUILDLINK_DIR}/bin/.buffer
_BLNK_WRAP_MARSHALL=		${BUILDLINK_DIR}/bin/.marshall
_BLNK_WRAP_PRE_CACHE=		${BUILDLINK_DIR}/bin/.pre-cache
_BLNK_WRAP_CACHE_ADD=		${BUILDLINK_DIR}/bin/.cache-add
_BLNK_WRAP_CACHE=		${BUILDLINK_DIR}/bin/.cache
_BLNK_WRAP_CACHE_ADD_TRANSFORM=	${BUILDLINK_DIR}/bin/.cache-add-trans
_BLNK_WRAP_CACHE_TRANSFORM=	${BUILDLINK_DIR}/bin/.cache-trans
_BLNK_WRAP_POST_CACHE=		${BUILDLINK_DIR}/bin/.post-cache
_BLNK_WRAP_LOGIC=		${BUILDLINK_DIR}/bin/.logic
_BLNK_WRAP_LOGIC_TRANSFORM=	${BUILDLINK_DIR}/bin/.logic-trans
_BLNK_WRAP_LOG=			${WRKLOG}
_BLNK_LIBTOOL_FIX_LA=		${BUILDLINK_DIR}/bin/.libtool-fix-la
_BLNK_FAKE_LA=			${BUILDLINK_DIR}/bin/.fake-la
_BLNK_GEN_TRANSFORM=		${BUILDLINK_DIR}/bin/.gen-transform
_BLNK_TRANSFORM_SEDFILE=	${BUILDLINK_DIR}/bin/.transform.sed
_BLNK_UNTRANSFORM_SEDFILE=	${BUILDLINK_DIR}/bin/.untransform.sed
_BLNK_REORDERLIBS=		${BUILDLINK_DIR}/bin/.reorderlibs

.if defined(BUILDLINK_WRAPPER_LOG)
MAKE_ENV+=	BUILDLINK_WRAPPER_LOG=${BUILDLINK_WRAPPER_LOG}
.endif

.for _wrappee_ in ${_BLNK_WRAPPEES}
#
# _BLNK_WRAPPER_SH.<wrappee> points to the main wrapper script used to
#	generate the wrapper for the wrappee.
#
_BLNK_WRAPPER_SH.${_wrappee_}=	${.CURDIR}/../../mk/buildlink3/wrapper.sh
_BLNK_WRAP_SANITIZE_PATH.${_wrappee_}=		${_BLNK_WRAP_SANITIZE_PATH}
_BLNK_WRAP_EXTRA_FLAGS.${_wrappee_}=		# empty
_BLNK_WRAP_ENV.${_wrappee_}=			${_BLNK_WRAP_ENV}
_BLNK_WRAP_BUILDCMD.${_wrappee_}=		${_BLNK_WRAP_BUILDCMD}
_BLNK_WRAP_QUOTEARG.${_wrappee_}=		${_BLNK_WRAP_QUOTEARG}
_BLNK_WRAP_BUFFER.${_wrappee_}=			${_BLNK_WRAP_BUFFER}
_BLNK_WRAP_MARSHALL.${_wrappee_}=		${_BLNK_WRAP_MARSHALL}
_BLNK_WRAP_PRIVATE_PRE_CACHE.${_wrappee_}=	${_BLNK_EMPTY_FILE}
_BLNK_WRAP_PRIVATE_CACHE_ADD.${_wrappee_}=	${_BLNK_EMPTY_FILE}
_BLNK_WRAP_PRIVATE_CACHE.${_wrappee_}=		${_BLNK_EMPTY_FILE}
_BLNK_WRAP_PRIVATE_POST_CACHE.${_wrappee_}=	${_BLNK_EMPTY_FILE}
_BLNK_WRAP_CACHE_ADD.${_wrappee_}=		${_BLNK_WRAP_CACHE_ADD_TRANSFORM}
_BLNK_WRAP_CACHE.${_wrappee_}=			${_BLNK_WRAP_CACHE_TRANSFORM}
_BLNK_WRAP_LOGIC.${_wrappee_}=			${_BLNK_WRAP_LOGIC_TRANSFORM}
_BLNK_WRAP_POST_LOGIC.${_wrappee_}=		${_BLNK_EMPTY_FILE}
.endfor

# Don't sanitize the PATH because we want libtool to invoke the wrapper
# scripts, too.
#
_BLNK_WRAPPER_SH.LIBTOOL=	${.CURDIR}/../../mk/buildlink3/libtool.sh
_BLNK_WRAP_SANITIZE_PATH.LIBTOOL=	# empty
#
_BLNK_WRAPPER_SH.SHLIBTOOL=	${.CURDIR}/../../mk/buildlink3/libtool.sh
_BLNK_WRAP_SANITIZE_PATH.SHLIBTOOL=	# empty

# We need to "unbuildlinkify" any libtool archives.
_BLNK_WRAP_LT_UNTRANSFORM_SED=		${_UNBUILDLINK_SED}

.if !empty(PKGSRC_COMPILER:Mmipspro)
_BLNK_WRAP_PRIVATE_PRE_CACHE.CC=	${_BLNK_WRAP_PRE_CACHE}
_BLNK_WRAP_PRIVATE_CACHE_ADD.CC=	${BUILDLINK_DIR}/bin/.mipspro-cc-cache-add
_BLNK_WRAP_PRIVATE_CACHE.CC=		${BUILDLINK_DIR}/bin/.mipspro-cc-cache
_BLNK_WRAP_PRIVATE_POST_CACHE.CC=	${BUILDLINK_DIR}/bin/.mipspro-cc-post-cache
_BLNK_WRAP_POST_LOGIC.CC=		${BUILDLINK_DIR}/bin/.mipspro-cc-post-logic
#
# The MIPSpro C++ compiler wrapper shares cache information with the C
# compiler.
#
_BLNK_WRAP_PRIVATE_PRE_CACHE.CXX=	${_BLNK_WRAP_PRE_CACHE}
_BLNK_WRAP_PRIVATE_CACHE_ADD.CXX=	${BUILDLINK_DIR}/bin/.mipspro-cc-cache-add
_BLNK_WRAP_PRIVATE_CACHE.CXX=		${BUILDLINK_DIR}/bin/.mipspro-cc-cache
_BLNK_WRAP_PRIVATE_POST_CACHE.CXX=	${BUILDLINK_DIR}/bin/.mipspro-cc-post-cache
_BLNK_WRAP_POST_LOGIC.CXX=		${BUILDLINK_DIR}/bin/.mipspro-cc-post-logic
.endif	# mipspro

.if !empty(PKGSRC_COMPILER:Mmipspro-ucode)
_BLNK_WRAP_PRIVATE_PRE_CACHE.CC=	${_BLNK_WRAP_PRE_CACHE}
_BLNK_WRAP_PRIVATE_CACHE_ADD.CC=	${BUILDLINK_DIR}/bin/.mipspro-ucode-cc-cache-add
_BLNK_WRAP_PRIVATE_CACHE.CC=		${BUILDLINK_DIR}/bin/.mipspro-ucode-cc-cache
_BLNK_WRAP_PRIVATE_POST_CACHE.CC=	${BUILDLINK_DIR}/bin/.mipspro-ucode-cc-post-cache
_BLNK_WRAP_POST_LOGIC.CC=		${BUILDLINK_DIR}/bin/.mipspro-ucode-cc-post-logic
#
# The MIPSpro ucode C++ compiler wrapper shares cache information with the C
# compiler.
#
_BLNK_WRAP_PRIVATE_PRE_CACHE.CXX=	${_BLNK_WRAP_PRE_CACHE}
_BLNK_WRAP_PRIVATE_CACHE_ADD.CXX=	${BUILDLINK_DIR}/bin/.mipspro-ucode-cc-cache-add
_BLNK_WRAP_PRIVATE_CACHE.CXX=		${BUILDLINK_DIR}/bin/.mipspro-ucode-cc-cache
_BLNK_WRAP_PRIVATE_POST_CACHE.CXX=	${BUILDLINK_DIR}/bin/.mipspro-ucode-cc-post-cache
_BLNK_WRAP_POST_LOGIC.CXX=		${BUILDLINK_DIR}/bin/.mipspro-ucode-cc-post-logic
.endif	# mipspro-ucode

.if !empty(PKGSRC_COMPILER:Msunpro)
_BLNK_WRAP_PRIVATE_PRE_CACHE.CC=	${_BLNK_WRAP_PRE_CACHE}
_BLNK_WRAP_PRIVATE_CACHE_ADD.CC=	${BUILDLINK_DIR}/bin/.sunpro-cc-cache-add
_BLNK_WRAP_PRIVATE_CACHE.CC=		${BUILDLINK_DIR}/bin/.sunpro-cc-cache
_BLNK_WRAP_PRIVATE_POST_CACHE.CC=	${BUILDLINK_DIR}/bin/.sunpro-cc-post-cache
_BLNK_WRAP_POST_LOGIC.CC=		${BUILDLINK_DIR}/bin/.sunpro-cc-post-logic
#
# The SunPro C++ compiler wrapper shares cache information with the C
# compiler.
#
_BLNK_WRAP_PRIVATE_PRE_CACHE.CXX=	${_BLNK_WRAP_PRE_CACHE}
_BLNK_WRAP_PRIVATE_CACHE_ADD.CXX=	${BUILDLINK_DIR}/bin/.sunpro-cc-cache-add
_BLNK_WRAP_PRIVATE_CACHE.CXX=		${BUILDLINK_DIR}/bin/.sunpro-cc-cache
_BLNK_WRAP_PRIVATE_POST_CACHE.CXX=	${BUILDLINK_DIR}/bin/.sunpro-cc-post-cache
_BLNK_WRAP_POST_LOGIC.CXX=		${BUILDLINK_DIR}/bin/.sunpro-cc-post-logic
.endif	# sunpro

_BLNK_WRAP_PRIVATE_PRE_CACHE.LD=	${_BLNK_WRAP_PRE_CACHE}
_BLNK_WRAP_PRIVATE_CACHE_ADD.LD=	${BUILDLINK_DIR}/bin/.ld-cache-add
_BLNK_WRAP_PRIVATE_CACHE.LD=		${BUILDLINK_DIR}/bin/.ld-cache
_BLNK_WRAP_PRIVATE_POST_CACHE.LD=	${BUILDLINK_DIR}/bin/.ld-post-cache
_BLNK_WRAP_POST_LOGIC.LD=		${BUILDLINK_DIR}/bin/.ld-post-logic

_BLNK_WRAP_PRIVATE_PRE_CACHE.LIBTOOL=	${_BLNK_WRAP_PRE_CACHE}
_BLNK_WRAP_PRIVATE_CACHE_ADD.LIBTOOL=	${BUILDLINK_DIR}/bin/.libtool-cache-add
_BLNK_WRAP_PRIVATE_CACHE.LIBTOOL=	${BUILDLINK_DIR}/bin/.libtool-cache
_BLNK_WRAP_PRIVATE_POST_CACHE.LIBTOOL=	${BUILDLINK_DIR}/bin/.libtool-post-cache
_BLNK_WRAP_POST_LOGIC.LIBTOOL=		${BUILDLINK_DIR}/bin/.libtool-post-logic

# shlibtool shares cache information with libtool.
_BLNK_WRAP_PRIVATE_PRE_CACHE.SHLIBTOOL=	${_BLNK_WRAP_PRIVATE_PRE_CACHE.LIBTOOL}
_BLNK_WRAP_PRIVATE_CACHE_ADD.SHLIBTOOL=	${_BLNK_WRAP_PRIVATE_CACHE_ADD.LIBTOOL}
_BLNK_WRAP_PRIVATE_CACHE.SHLIBTOOL=	${_BLNK_WRAP_PRIVATE_CACHE.LIBTOOL}
_BLNK_WRAP_PRIVATE_POST_CACHE.SHLIBTOOL= ${_BLNK_WRAP_PRIVATE_POST_CACHE.LIBTOOL}
_BLNK_WRAP_POST_LOGIC.SHLIBTOOL=	${_BLNK_WRAP_POST_LOGIC.LIBTOOL}

# Don't transform the arguments for imake, which uses the C preprocessor
# to generate Makefiles, so that imake will find its config files.
#
.if defined(USE_X11)
_BLNK_WRAP_CACHE_ADD.IMAKE=	${_BLNK_WRAP_CACHE_ADD}
_BLNK_WRAP_CACHE.IMAKE=		${_BLNK_WRAP_CACHE}
_BLNK_WRAP_LOGIC.IMAKE=		${_BLNK_WRAP_LOGIC}
.endif

# Silently pass the appropriate flags to the compiler/linker commands so
# that headers and libraries in ${BUILDLINK_DIR}/{include,lib} are found
# before the system headers and libraries.
#
_BLNK_CPPFLAGS=			-I${BUILDLINK_DIR}/include
_BLNK_LDFLAGS=			-L${BUILDLINK_DIR}/lib
_BLNK_WRAP_EXTRA_FLAGS.CC=	${_BLNK_CPPFLAGS} ${_BLNK_LDFLAGS}
_BLNK_WRAP_EXTRA_FLAGS.CXX=	${_BLNK_CPPFLAGS} ${_BLNK_LDFLAGS}
_BLNK_WRAP_EXTRA_FLAGS.CPP=	${_BLNK_CPPFLAGS}
_BLNK_WRAP_EXTRA_FLAGS.FC=	${_BLNK_CPPFLAGS} ${_BLNK_LDFLAGS}
_BLNK_WRAP_EXTRA_FLAGS.LD=	${_BLNK_LDFLAGS}
_BLNK_WRAP_EXTRA_FLAGS.LIBTOOL=		${_BLNK_LDFLAGS}
_BLNK_WRAP_EXTRA_FLAGS.SHLIBTOOL=	${_BLNK_WRAP_EXTRA_FLAGS.LIBTOOL}

.PHONY: buildlink-wrappers

buildlink-wrappers: ${_BLNK_LIBTOOL_FIX_LA}

.for _wrappee_ in ${_BLNK_WRAPPEES}
.  if defined(PKG_${_wrappee_})
_BLNK_PKG_${_wrappee_}=	${PKG_${_wrappee_}}
.  else
_BLNK_PKG_${_wrappee_}=	${${_wrappee_}}
.  endif

BUILDLINK_${_wrappee_}=	\
	${BUILDLINK_DIR}/bin/${_BLNK_PKG_${_wrappee_}:T:C/^/_asdf_/1:M_asdf_*:S/^_asdf_//}
${_wrappee_}:=	${BUILDLINK_${_wrappee_}:T}

# Filter to scrunch shell scripts by removing comments and empty lines.
_BLNK_SH_CRUNCH_FILTER= \
	${GREP} -v "^\#[^!]" | ${GREP} -v "^[ 	][ 	]*\#" |		\
	${GREP} -v "^\#$$" | ${GREP} -v "^[ 	]*$$"

_BLNK_WRAPPER_TRANSFORM_SED.${_wrappee_}=				\
	-e "s|@BUILDLINK_DIR@|${BUILDLINK_DIR}|g"			\
	-e "s|@BUILDLINK_SHELL@|${BUILDLINK_SHELL}|g"			\
	-e "s|@WRKDIR@|${WRKDIR}|g"					\
	-e "s|@WRKSRC@|${WRKSRC}|g"					\
	-e "s|@BASENAME@|${BASENAME:Q}|g"				\
	-e "s|@CAT@|${CAT:Q}|g"						\
	-e "s|@DIRNAME@|${DIRNAME:Q}|g"					\
	-e "s|@ECHO@|${ECHO:Q}|g"					\
	-e "s|@EXPR@|${EXPR:Q}|g"					\
	-e "s|@PWD_CMD@|${PWD_CMD:Q}|g"					\
	-e "s|@SED@|${SED:Q}|g"						\
	-e "s|@TEST@|${TEST:Q}|g"					\
	-e "s|@TOUCH@|${TOUCH:Q}|g"					\
	-e "s|@_BLNK_LIBTOOL_FIX_LA@|${_BLNK_LIBTOOL_FIX_LA:Q}|g"	\
	-e "s|@_BLNK_REORDERLIBS@|${_BLNK_REORDERLIBS:Q}|g"		\
	-e "s|@_BLNK_WRAP_LOG@|${_BLNK_WRAP_LOG:Q}|g"			\
	-e "s|@_BLNK_WRAP_EXTRA_FLAGS@|${_BLNK_WRAP_EXTRA_FLAGS.${_wrappee_}:Q}|g" \
	-e "s|@_BLNK_WRAP_BUILDCMD@|${_BLNK_WRAP_BUILDCMD.${_wrappee_}:Q}|g" \
	-e "s|@_BLNK_WRAP_QUOTEARG@|${_BLNK_WRAP_QUOTEARG.${_wrappee_}:Q}|g" \
	-e "s|@_BLNK_WRAP_BUFFER@|${_BLNK_WRAP_BUFFER.${_wrappee_}:Q}|g" \
	-e "s|@_BLNK_WRAP_MARSHALL@|${_BLNK_WRAP_MARSHALL.${_wrappee_}:Q}|g" \
	-e "s|@_BLNK_WRAP_PRIVATE_PRE_CACHE@|${_BLNK_WRAP_PRIVATE_PRE_CACHE.${_wrappee_}:Q}|g" \
	-e "s|@_BLNK_WRAP_PRIVATE_CACHE_ADD@|${_BLNK_WRAP_PRIVATE_CACHE_ADD.${_wrappee_}:Q}|g" \
	-e "s|@_BLNK_WRAP_PRIVATE_CACHE@|${_BLNK_WRAP_PRIVATE_CACHE.${_wrappee_}:Q}|g" \
	-e "s|@_BLNK_WRAP_PRIVATE_POST_CACHE@|${_BLNK_WRAP_PRIVATE_POST_CACHE.${_wrappee_}:Q}|g" \
	-e "s|@_BLNK_WRAP_PRE_CACHE@|${_BLNK_WRAP_PRE_CACHE:Q}|g"	\
	-e "s|@_BLNK_WRAP_CACHE_ADD@|${_BLNK_WRAP_CACHE_ADD.${_wrappee_}:Q}|g" \
	-e "s|@_BLNK_WRAP_CACHE@|${_BLNK_WRAP_CACHE.${_wrappee_}:Q}|g"	\
	-e "s|@_BLNK_WRAP_POST_CACHE@|${_BLNK_WRAP_POST_CACHE:Q}|g"	\
	-e "s|@_BLNK_WRAP_LOGIC@|${_BLNK_WRAP_LOGIC.${_wrappee_}:Q}|g"	\
	-e "s|@_BLNK_WRAP_POST_LOGIC@|${_BLNK_WRAP_POST_LOGIC.${_wrappee_}:Q}|g" \
	-e "s|@_BLNK_WRAP_ENV@|${_BLNK_WRAP_ENV.${_wrappee_}:Q}|g"	\
	-e "s|@_BLNK_WRAP_SANITIZE_PATH@|${_BLNK_WRAP_SANITIZE_PATH.${_wrappee_}:Q}|g"

_BLNK_WRAPPEE_COOKIE.${_wrappee_}=	\
	${BUILDLINK_DIR}/.buildlink_wrapper_${_wrappee_}_done

buildlink-wrappers: ${_BLNK_WRAPPEE_COOKIE.${_wrappee_}}
${_BLNK_WRAPPEE_COOKIE.${_wrappee_}}:					\
		${_BLNK_WRAPPER_SH.${_wrappee_}}			\
		${_BLNK_WRAP_BUILDCMD.${_wrappee_}}			\
		${_BLNK_WRAP_QUOTEARG.${_wrappee_}}			\
		${_BLNK_WRAP_BUFFER.${_wrappee_}}			\
		${_BLNK_WRAP_MARSHALL.${_wrappee_}}			\
		${_BLNK_WRAP_PRIVATE_CACHE.${_wrappee_}}		\
		${_BLNK_WRAP_CACHE.${_wrappee_}}			\
		${_BLNK_WRAP_LOGIC.${_wrappee_}}			\
		${_BLNK_WRAP_POST_LOGIC.${_wrappee_}}
	${_PKG_SILENT}${_PKG_DEBUG}${ECHO_BUILDLINK_MSG}		\
		"=> Creating wrapper: ${BUILDLINK_${_wrappee_}}"
	${_PKG_SILENT}${_PKG_DEBUG}					\
	wrappee="${_BLNK_PKG_${_wrappee_}:C/^/_asdf_/1:M_asdf_*:S/^_asdf_//}"; \
	gen=yes;							\
	case $${wrappee} in						\
	/*)	absdir=;						\
		;;							\
	*)	OLDIFS="$$IFS";						\
		IFS=":";						\
		for dir in $${PATH}; do					\
			case $${dir} in					\
			*${BUILDLINK_DIR}*)				\
				;;					\
			*)	if [ -f $${dir}/$${wrappee} ] ||	\
				   [ -h $${dir}/$${wrappee} ] &&	\
				   [ -x $${dir}/$${wrappee} ]; then	\
					absdir=$${dir}/;		\
					wrappee=$${absdir}$${wrappee};	\
					break;				\
				fi;					\
				;;					\
			esac;						\
		done;							\
		IFS="$$OLDIFS";						\
		if [ ! -x "$${wrappee}" ]; then				\
			gen=no;						\
			${ECHO_BUILDLINK_MSG} "Warning: unable to create \"$${wrappee}\" wrapper script"; \
		fi;							\
		;;							\
	esac;								\
	case $$gen in							\
	yes)								\
		${MKDIR} ${BUILDLINK_${_wrappee_}:H};			\
		${CAT} ${_BLNK_WRAPPER_SH.${_wrappee_}}	|		\
		${SED}	${_BLNK_WRAPPER_TRANSFORM_SED.${_wrappee_}}	\
			-e "s|@WRAPPEE@|$${absdir}${_BLNK_PKG_${_wrappee_}:Q}|g" | \
		${_BLNK_SH_CRUNCH_FILTER}				\
		> ${BUILDLINK_${_wrappee_}};				\
		${CHMOD} +x ${BUILDLINK_${_wrappee_}};			\
		;;							\
	esac
.  for _alias_ in ${_ALIASES.${_wrappee_}:S/^/${BUILDLINK_DIR}\/bin\//}
	${_PKG_SILENT}${_PKG_DEBUG}					\
	if [ ! -x ${_alias_} -a -x ${BUILDLINK_${_wrappee_}} ]; then	\
		${ECHO_BUILDLINK_MSG} "=> Linking wrapper: ${_alias_}";	\
		${LN} -f ${BUILDLINK_${_wrappee_}} ${_alias_};		\
	fi
.  endfor
	${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${.TARGET}
.endfor   # _wrappee_

# Allow BUILDLINK_ENV to override shell environment settings in
# ${CONFIGURE_ENV} and in ${MAKE_ENV} for the configure and build processes,
# respectively.
#
CONFIGURE_ENV+=	${BUILDLINK_ENV}
MAKE_ENV+=	${BUILDLINK_ENV}

.PHONY: buildlink-${_BLNK_OPSYS}-wrappers
buildlink-${_BLNK_OPSYS}-wrappers: buildlink-wrappers
.for _wrappee_ in ${_BLNK_WRAPPEES.${_BLNK_OPSYS}}
	${_PKG_SILENT}${_PKG_DEBUG}					\
	if [ -x "${${_wrappee_}.${_BLNK_OPSYS}}" ]; then		\
		wrapper="${BUILDLINK_DIR}/bin/${${_wrappee_}.${_BLNK_OPSYS}:T}"; \
		${ECHO_BUILDLINK_MSG}					\
			"=> Creating ${_BLNK_OPSYS} wrapper: $${wrapper}"; \
		${RM} -f $${wrapper};					\
		${CAT} ${_BLNK_WRAPPER_SH.${_wrappee_}} |		\
		${SED}	${_BLNK_WRAPPER_TRANSFORM_SED.${_wrappee_}}	\
			-e "s|@WRAPPEE@|${${_wrappee_}.${_BLNK_OPSYS}}|g" | \
		${_BLNK_SH_CRUNCH_FILTER}				\
		> $${wrapper};						\
		${CHMOD} +x $${wrapper};				\
		for file in ${_ALIASES.${_wrappee_}:S/^/${BUILDLINK_DIR}\/bin\//}; do \
			if [ "$${file}" != "$${wrappee}" ]; then	\
				${TOUCH} $${file};			\
			fi;						\
		done;							\
	fi
.endfor

.if !target(${_BLNK_EMPTY_FILE})
${_BLNK_EMPTY_FILE}:
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_ARGS} ${.TARGET}
.endif

.if !target(${_BLNK_WRAP_BUILDCMD})
${_BLNK_WRAP_BUILDCMD}: ${.CURDIR}/../../mk/buildlink3/buildcmd
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${CAT} ${.ALLSRC}			\
		| ${_BLNK_SH_CRUNCH_FILTER} > ${.TARGET}
.endif

.if !target(${_BLNK_WRAP_QUOTEARG})
${_BLNK_WRAP_QUOTEARG}: ${.CURDIR}/../../mk/buildlink3/quotearg
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${CAT} ${.ALLSRC}			\
		| ${_BLNK_SH_CRUNCH_FILTER} > ${.TARGET}
.endif

.if !target(${_BLNK_WRAP_BUFFER})
${_BLNK_WRAP_BUFFER}: ${.CURDIR}/../../mk/buildlink3/buffer
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${CAT} ${.ALLSRC}			\
		| ${_BLNK_SH_CRUNCH_FILTER} > ${.TARGET}
.endif

.if !target(${_BLNK_WRAP_MARSHALL})
${_BLNK_WRAP_MARSHALL}: ${.CURDIR}/../../mk/buildlink3/marshall
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${CAT} ${.ALLSRC}			\
		| ${_BLNK_SH_CRUNCH_FILTER} > ${.TARGET}
.endif

.if !target(${_BLNK_WRAP_PRE_CACHE})
${_BLNK_WRAP_PRE_CACHE}: ${.CURDIR}/../../mk/buildlink3/pre-cache
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${CAT} ${.ALLSRC}			\
		| ${_BLNK_SH_CRUNCH_FILTER} > ${.TARGET}
.endif

.if !target(${_BLNK_WRAP_CACHE_ADD})
${_BLNK_WRAP_CACHE_ADD}:
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_ARGS} ${.TARGET}
.endif

.if !target(${_BLNK_WRAP_CACHE})
${_BLNK_WRAP_CACHE}:							\
		${_BLNK_WRAP_PRE_CACHE}					\
		${_BLNK_WRAP_CACHE_ADD}					\
		${_BLNK_WRAP_POST_CACHE}
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${CAT} ${.ALLSRC}			\
		| ${_BLNK_SH_CRUNCH_FILTER} > ${.TARGET}.tmp
	${_PKG_SILENT}${_PKG_DEBUG}${MV} -f ${.TARGET}.tmp ${.TARGET}
.endif

.if !target(${_BLNK_WRAP_CACHE_TRANSFORM})
${_BLNK_WRAP_CACHE_TRANSFORM}:						\
		${_BLNK_WRAP_PRE_CACHE}					\
		${_BLNK_WRAP_CACHE_ADD_TRANSFORM}			\
		${_BLNK_WRAP_POST_CACHE}
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${CAT} ${.ALLSRC}			\
		| ${_BLNK_SH_CRUNCH_FILTER} > ${.TARGET}.tmp
	${_PKG_SILENT}${_PKG_DEBUG}${MV} -f ${.TARGET}.tmp ${.TARGET}
.endif

.if !target(${_BLNK_WRAP_POST_CACHE})
${_BLNK_WRAP_POST_CACHE}: ${.CURDIR}/../../mk/buildlink3/post-cache
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${CAT} ${.ALLSRC}			\
		| ${_BLNK_SH_CRUNCH_FILTER} > ${.TARGET}
.endif

${BUILDLINK_DIR}/bin/.mipspro-cc-post-cache:				\
		${.CURDIR}/../../mk/buildlink3/mipspro-cc-post-cache
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${CAT} ${.ALLSRC}			\
		| ${_BLNK_SH_CRUNCH_FILTER} > ${.TARGET}

${BUILDLINK_DIR}/bin/.mipspro-ucode-cc-post-cache:			\
		${.CURDIR}/../../mk/buildlink3/mipspro-ucode-cc-post-cache
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${CAT} ${.ALLSRC}			\
		| ${_BLNK_SH_CRUNCH_FILTER} > ${.TARGET}

${BUILDLINK_DIR}/bin/.sunpro-cc-post-cache:				\
		${.CURDIR}/../../mk/buildlink3/sunpro-cc-post-cache
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${CAT} ${.ALLSRC}			\
		| ${_BLNK_SH_CRUNCH_FILTER} > ${.TARGET}

${BUILDLINK_DIR}/bin/.ld-post-cache:					\
		${.CURDIR}/../../mk/buildlink3/ld-post-cache
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${CAT} ${.ALLSRC}			\
		| ${_BLNK_SH_CRUNCH_FILTER} > ${.TARGET}

${BUILDLINK_DIR}/bin/.libtool-post-cache:				\
		${.CURDIR}/../../mk/buildlink3/libtool-post-cache
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${CAT} ${.ALLSRC}			\
		| ${_BLNK_SH_CRUNCH_FILTER} > ${.TARGET}

.for _wrappee_ in ${_BLNK_WRAPPEES}
.  if !target(${_BLNK_WRAP_PRIVATE_PRE_CACHE.${_wrappee_}})
${_BLNK_WRAP_PRIVATE_PRE_CACHE.${_wrappee_}}:
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_ARGS} ${.TARGET}
.  endif
.  if !target(${_BLNK_WRAP_PRIVATE_CACHE_ADD.${_wrappee_}})
${_BLNK_WRAP_PRIVATE_CACHE_ADD.${_wrappee_}}:
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_ARGS} ${.TARGET}
.  endif
.  if !target(${_BLNK_WRAP_PRIVATE_POST_CACHE.${_wrappee_}})
${_BLNK_WRAP_PRIVATE_POST_CACHE.${_wrappee_}}:
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_ARGS} ${.TARGET}
.  endif
.  if !target(${_BLNK_WRAP_PRIVATE_CACHE.${_wrappee_}})
${_BLNK_WRAP_PRIVATE_CACHE.${_wrappee_}}:				\
		${_BLNK_WRAP_PRIVATE_PRE_CACHE.${_wrappee_}}		\
		${_BLNK_WRAP_PRIVATE_CACHE_ADD.${_wrappee_}}		\
		${_BLNK_WRAP_PRIVATE_POST_CACHE.${_wrappee_}}
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${CAT} ${.ALLSRC}			\
		| ${_BLNK_SH_CRUNCH_FILTER} > ${.TARGET}.tmp
	${_PKG_SILENT}${_PKG_DEBUG}${MV} -f ${.TARGET}.tmp ${.TARGET}
.  endif
.endfor

.if !target(${_BLNK_WRAP_LOGIC})
${_BLNK_WRAP_LOGIC}: ${.CURDIR}/../../mk/buildlink3/logic
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${SED}				\
		-e "s|@LOCALBASE@|${LOCALBASE}|g"			\
		-e "s|@X11BASE@|${X11BASE}|g"				\
		-e 's|@_BLNK_TRANSFORM_SED@||g'				\
		${.ALLSRC} | ${_BLNK_SH_CRUNCH_FILTER} > ${.TARGET}.tmp
	${_PKG_SILENT}${_PKG_DEBUG}${MV} -f ${.TARGET}.tmp ${.TARGET}
.endif

.if !target(${_BLNK_WRAP_LOGIC_TRANSFORM})
${_BLNK_WRAP_LOGIC_TRANSFORM}:						\
		${.CURDIR}/../../mk/buildlink3/logic			\
		${_BLNK_TRANSFORM_SEDFILE}
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${SED}				\
		-e "s|@LOCALBASE@|${LOCALBASE}|g"			\
		-e "s|@X11BASE@|${X11BASE}|g"				\
		-e 's|@_BLNK_TRANSFORM_SED@|${_BLNK_TRANSFORM_SED:Q}|g'	\
		${.CURDIR}/../../mk/buildlink3/logic			\
		| ${_BLNK_SH_CRUNCH_FILTER} > ${.TARGET}.tmp
	${_PKG_SILENT}${_PKG_DEBUG}${MV} -f ${.TARGET}.tmp ${.TARGET}
.endif

${BUILDLINK_DIR}/bin/.mipspro-cc-post-logic:				\
		${.CURDIR}/../../mk/buildlink3/mipspro-cc-post-logic
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${CAT} ${.ALLSRC}			\
		| ${_BLNK_SH_CRUNCH_FILTER} > ${.TARGET}

${BUILDLINK_DIR}/bin/.mipspro-ucode-cc-post-logic:			\
		${.CURDIR}/../../mk/buildlink3/mipspro-ucode-cc-post-logic
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${CAT} ${.ALLSRC}			\
		| ${_BLNK_SH_CRUNCH_FILTER} > ${.TARGET}

${BUILDLINK_DIR}/bin/.sunpro-cc-post-logic:				\
		${.CURDIR}/../../mk/buildlink3/sunpro-cc-post-logic
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${CAT} ${.ALLSRC}			\
		| ${_BLNK_SH_CRUNCH_FILTER} > ${.TARGET}

${BUILDLINK_DIR}/bin/.ld-post-logic:					\
		${.CURDIR}/../../mk/buildlink3/ld-post-logic
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${CAT} ${.ALLSRC}			\
		| ${_BLNK_SH_CRUNCH_FILTER} > ${.TARGET}

${BUILDLINK_DIR}/bin/.libtool-post-logic:				\
		${.CURDIR}/../../mk/buildlink3/libtool-post-logic
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${CAT} ${.ALLSRC}			\
		| ${_BLNK_SH_CRUNCH_FILTER} > ${.TARGET}

.for _wrappee_ in ${_BLNK_WRAPPEES}
.  if !target(${_BLNK_WRAP_PRIVATE_POST_LOGIC.${_wrappee_}})
${_BLNK_WRAP_PRIVATE_POST_LOGIC.${_wrappee_}}:
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_ARGS} ${.TARGET}
.  endif
.endfor

${BUILDLINK_DIR}/bin/.libtool-fix-la:					\
		${.CURDIR}/../../mk/buildlink3/libtool-fix-la		\
		${_BLNK_UNTRANSFORM_SEDFILE}
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${SED}				\
		-e "s|@LOCALBASE@|${LOCALBASE}|g"			\
		-e "s|@DEPOTBASE@|${DEPOTBASE}|g"			\
		-e "s|@WRKSRC@|${WRKSRC}|g"				\
		-e "s|@BASENAME@|${BASENAME:Q}|g"			\
		-e "s|@CP@|${CP:Q}|g"					\
		-e "s|@DIRNAME@|${DIRNAME:Q}|g"				\
		-e "s|@EGREP@|${EGREP:Q}|g"				\
		-e "s|@MV@|${MV:Q}|g"					\
		-e "s|@RM@|${RM:Q}|g"					\
		-e "s|@SED@|${SED:Q}|g"					\
		-e "s|@TOUCH@|${TOUCH:Q}|g"				\
		-e 's|@_BLNK_WRAP_LT_UNTRANSFORM_SED@|${_BLNK_WRAP_LT_UNTRANSFORM_SED:Q}|g' \
		${.CURDIR}/../../mk/buildlink3/libtool-fix-la		\
		| ${_BLNK_SH_CRUNCH_FILTER} > ${.TARGET}.tmp
	${_PKG_SILENT}${_PKG_DEBUG}${MV} -f ${.TARGET}.tmp ${.TARGET}

# Seed the common transforming cache with obvious values that greatly
# speed up the wrappers.
#
_BLNK_RPATH_FLAGS=	${RPATH_FLAG}
_BLNK_RPATH_FLAGS+=	-Wl,${RPATH_FLAG}
.for _rflag_ in \
	-Wl,-R -Wl,-rpath, -Wl,--rpath, -Wl,-rpath-link, -Wl,--rpath-link
.  if empty(_BLNK_RPATH_FLAGS:M${_rflag_})
_BLNK_RPATH_FLAGS+=	${_rflag_}
.  endif
.endfor
#
.if !empty(_BLNK_SEED_CACHE:Mpassthru)
#
# Pass through all single letter options, because we don't touch those.
#
_BLNK_CACHE_PASSTHRU_GLOB=	-?
#
# Directories in the ${WRKDIR} should all be allowed in -[IL]<dir>
_BLNK_CACHE_PASSTHRU_GLOB+=	-[IL]${WRKDIR}*|-[IL]${BUILDLINK_DIR}*
#
# Directories relative to the srcdir should be allowed in -[IL]<dir>
_BLNK_CACHE_PASSTHRU_GLOB+=	-[IL].|-[IL]./*|-[IL]..*|-[IL][!/]*
#
# Allow the depot directories for packages for which we need to find
# headers and libraries for both -[IL]<dir>.
#
.  if ${PKG_INSTALLATION_TYPE} == "pkgviews"
.    for _pkg_ in ${_BLNK_PACKAGES}
.      if !empty(BUILDLINK_IS_DEPOT.${_pkg_}:M[yY][eE][sS])
_BLNK_CACHE_PASSTHRU_GLOB+=	-[IL]${BUILDLINK_PREFIX.${_pkg_}}/*
.      endif
.    endfor
.  endif
#
# Allow all subdirs of ${_BLNK_PASSTHRU_DIRS} and ${_BLNK_PASSTHRU_RPATHDIRS}
# to be in the runtime library search path.
#
.  if ${_USE_RPATH} == "yes"
.    for _dir_ in ${_BLNK_PASSTHRU_DIRS} ${_BLNK_PASSTHRU_RPATHDIRS}
.      for _R_ in ${_BLNK_RPATH_FLAGS}
_BLNK_CACHE_PASSTHRU_GLOB+=	${_R_}${_dir_}|${_R_}${_dir_}/*
.      endfor
.    endfor
.  endif
.endif # _BLNK_SEED_CACHE has "passthru"

.if !empty(_BLNK_SEED_CACHE:Mblock)
#
# Block all other absolute paths (we handle the ${X11BASE} case below).
#
_BLNK_CACHE_BLOCK_GLOB=		-[IL]/*
.  if ${_USE_RPATH} == "yes"
.    for _R_ in ${_BLNK_RPATH_FLAGS}
_BLNK_CACHE_BLOCK_GLOB:=	${_BLNK_CACHE_BLOCK_GLOB}|${_R_}/*
.    endfor
.  endif
.endif # _BLNK_SEED_CACHE has "block"

${_BLNK_WRAP_CACHE_ADD_TRANSFORM}:
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${.TARGET}
	${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${.TARGET}
.if !empty(_BLNK_SEED_CACHE)
.  if !empty(_BLNK_SEED_CACHE:Mpassthru)
.    for _glob_ in ${_BLNK_CACHE_PASSTHRU_GLOB}
	${_PKG_SILENT}${_PKG_DEBUG}					\
	( ${ECHO} "${_glob_})";						\
	  ${ECHO} "	cachehit=yes";					\
	  ${ECHO} "	;;";						\
	) >> ${.TARGET}
.    endfor
.  endif # _BLNK_SEED_CACHE has "passthru"
.  if !empty(_BLNK_SEED_CACHE:Mtransform)
.    if ${PKG_INSTALLATION_TYPE} == "overwrite"
	${_PKG_SILENT}${_PKG_DEBUG}					\
	( ${ECHO} "-I${DEPOTBASE}/*)";					\
	  ${ECHO} "	arg=\"-I${BUILDLINK_DIR}/\$${arg#-I${DEPOTBASE}/[!/]*/}\""; \
	  ${ECHO} "	cachehit=yes";					\
	  ${ECHO} "	;;";						\
	) >> ${.TARGET}
	${_PKG_SILENT}${_PKG_DEBUG}					\
	( ${ECHO} "-L${DEPOTBASE}/*)";					\
	  ${ECHO} "	arg=\"-L${BUILDLINK_DIR}/\$${arg#-I${DEPOTBASE}/[!/]*/}\""; \
	  ${ECHO} "	cachehit=yes";					\
	  ${ECHO} "	;;";						\
	) >> ${.TARGET}
	${_PKG_SILENT}${_PKG_DEBUG}					\
	( ${ECHO} "-I${LOCALBASE}/*)";					\
	  ${ECHO} "	arg=\"-I${BUILDLINK_DIR}/\$${arg#-I${LOCALBASE}/}\""; \
	  ${ECHO} "	cachehit=yes";					\
	  ${ECHO} "	;;";						\
	) >> ${.TARGET}
	${_PKG_SILENT}${_PKG_DEBUG}					\
	( ${ECHO} "-L${LOCALBASE}/*)";					\
	  ${ECHO} "	arg=\"-L${BUILDLINK_DIR}/\$${arg#-L${LOCALBASE}/}\""; \
	  ${ECHO} "	cachehit=yes";					\
	  ${ECHO} "	;;";						\
	) >> ${.TARGET}
.    endif
.    if defined(USE_X11)
	${_PKG_SILENT}${_PKG_DEBUG}					\
	( ${ECHO} "-I${X11BASE}/*)";					\
	  ${ECHO} "	arg=\"-I${BUILDLINK_X11_DIR}/\$${arg#-I${X11BASE}/}\""; \
	  ${ECHO} "	cachehit=yes";					\
	  ${ECHO} "	;;";						\
	) >> ${.TARGET}
	${_PKG_SILENT}${_PKG_DEBUG}					\
	( ${ECHO} "-L${X11BASE}/*)";					\
	  ${ECHO} "	arg=\"-L${BUILDLINK_X11_DIR}/\$${arg#-L${X11BASE}/}\""; \
	  ${ECHO} "	cachehit=yes";					\
	  ${ECHO} "	;;";						\
	) >> ${.TARGET}
.    endif
.  endif # _BLNK_SEED_CACHE has "transform"
.  if !empty(_BLNK_SEED_CACHE:Mblock)
.    for _glob_ in ${_BLNK_CACHE_BLOCK_GLOB}
	${_PKG_SILENT}${_PKG_DEBUG}					\
	( ${ECHO} "${_glob_})";						\
	  ${ECHO} "	arg=; cachehit=yes;";				\
	  ${ECHO} "	;;";						\
	) >> ${.TARGET}
.    endfor
.  endif # _BLNK_SEED_CACHE has "block"
.endif	 # _BLNK_SEED_CACHE

${_BLNK_GEN_TRANSFORM}: ${.CURDIR}/../../mk/buildlink3/gen-transform.sh
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${SED}				\
		-e "s|@_BLNK_TRANSFORM_SEDFILE@|${_BLNK_TRANSFORM_SEDFILE:Q}|g" \
		-e "s|@_BLNK_UNTRANSFORM_SEDFILE@|${_BLNK_UNTRANSFORM_SEDFILE:Q}|g" \
		-e "s|@_BLNK_REORDERLIBS@|${_BLNK_REORDERLIBS:Q}|g"	\
		-e "s|@_COMPILER_LD_FLAG@|${_COMPILER_LD_FLAG:Q}|g"     \
		-e "s|@_OPSYS_RPATH_NAME@|${_OPSYS_RPATH_NAME:Q}|g"     \
		-e "s|@BUILDLINK_SHELL@|${BUILDLINK_SHELL:Q}|g"         \
		-e "s|@CAT@|${CAT:Q}|g"                                 \
		${.ALLSRC} > ${.TARGET}.tmp
	${_PKG_SILENT}${_PKG_DEBUG}${CHMOD} +x ${.TARGET}.tmp
	${_PKG_SILENT}${_PKG_DEBUG}${MV} -f ${.TARGET}.tmp ${.TARGET}

${_BLNK_TRANSFORM_SEDFILE} ${_BLNK_UNTRANSFORM_SEDFILE} ${_BLNK_REORDERLIBS}: \
		${_BLNK_GEN_TRANSFORM}
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${_BLNK_GEN_TRANSFORM}		\
		${_BLNK_TRANSFORM}
.endif	# BUILDLINK_PHASES

.PHONY: buildlink-vars-mk
buildlink-vars-mk: ${_BLNK_VARS_MK}
${_BLNK_VARS_MK}:
	${_PKG_SILENT}${_PKG_DEBUG}${MKDIR} ${.TARGET:H}
	${_PKG_SILENT}${_PKG_DEBUG}${RM} -f ${.TARGET}.tmp
.for _var_ in ${BUILDLINK_VARS}
	${_PKG_SILENT}${_PKG_DEBUG}					\
	${ECHO} "${_var_}=	${${_var_}}" >> ${.TARGET}.tmp
.endfor
	${_PKG_SILENT}${_PKG_DEBUG}					\
	if [ -f ${.TARGET}.tmp ]; then					\
		${SORT} -u ${.TARGET}.tmp > ${.TARGET};			\
		${RM} -f ${.TARGET}.tmp;				\
	fi 
	${_PKG_SILENT}${_PKG_DEBUG}${TOUCH} ${TOUCH_FLAGS} ${.TARGET}