# $NetBSD: mk.conf,v 1.77 2005/08/07 16:37:11 wiz Exp $ # # A file providing defaults for pkgsrc and the packages collection. # See the NetBSD mk.conf(5) and packages(7) manual page for a full # description of all available options. # # ************************************************************************ # NOTE TO PEOPLE EDITING THIS FILE - USE LEADING SPACES, NOT LEADING TABS. # ************************************************************************ #ALLOW_VULNERABLE_PACKAGES= # allow the user to build packages which are known to be vulnerable to # security exploits # Possible: defined, not defined # Default: not defined MANINSTALL?= maninstall catinstall # Specify manpage installation types. # Possible: maninstall, catinstall, both types or empty # Default: maninstall catinstall #MANZ= # gzip manual pages at installation time # Possible: defined, not defined # Default: not defined GZIP?= -9 # default compression level when compressing files with gzip # Possible: -[0-9], --fast, --best (see gzip(1)) # Default: -9 #MKCRYPTO= no # If not YES or yes, don't fetch, build or install crypto packages. # Possible: not defined, no # Default: yes #OBJHOSTNAME= # use hostname-specific object directories, e.g. work.amnesiac, work.localhost # OBJHOSTNAME takes precedence over OBJMACHINE (see below). # Possible: defined, not defined # Default: not defined #OBJMACHINE= # use machine-specific object directories, e.g. work.i386, work.sparc # Possible: defined, not defined # Default: not defined #PKG_SUFX= .tbz # Create binary packages with bzip2(1) or gzip(1). # Possible: .tbz, .tgz # Default: .tgz PKGSRC_LOCKTYPE?= none # The type of locking which will be done if competing processes attempt to # do work on one package directory simultaneously. # + Locking requires that OBJHOSTNAME is set. # + Locking may require the pkgsrc/pkgtools/shlock package to be installed # on certain OS types. # + Sleep locking means that the process will sleep for ${PKGSRC_SLEEPSECS} # seconds, then try to acquire the lock, and sleeping again if it's not # available. # + Once locking will try once to acquire the lock, and then fail. # Possible: none, sleep, once # Default: none PKGSRC_SLEEPSECS?= 5 # The number of seconds to wait when PKGSRC_LOCKTYPE is sleep # Possible: a positive integer # Default: 5 #USETBL= # Run raw manual pages through tbl(1) before piping through troff(1) # when formatting manual pages. # Possible: defined, not defined # Default: not defined # # The following values are used to manage the packages collection as a whole. # #ABI= # The ABI to be used, if supported by the Operating System and/or compiler. # Currently only used under IRIX and explicitly set during bootstrapping # Only change this if you really know what you're doing -- libraries of # one ABI can not be linked with libraries of another! # Possible: 64 (64 bit ABI), 32 (SGI's N32 ABI), undefined (SGI's old o32 ABI) # Default: determined during bootstrapping #PKG_DEVELOPER= yes # Run a sanity check that package developers want: # * run check-shlibs to see that all binaries will find their libs # Possible: defined, not defined # Default: not defined IGNORE_RECOMMENDED?= no # Ignore package prerequisite recommendations. If this is set to # "no", all entries in RECOMMENDED will be added to DEPENDS. # If set to "yes", a warning will be printed if recommendations # are possibly ignored. # # WARNING: This should only be set if you know what you're doing. # Please read pkgsrc/doc/pkgsrc.txt for details. # # Possible: yes, no # Default: no #PKG_REGISTER_SHELLS= YES # Automatically register shells in /etc/shells # Possible: YES, NO # Default: YES PKGSRC_COMPILER?= gcc # Compiler type(s) to use for building packages # Possible: (see comments in mk/compiler.mk) # Default: "gcc" PKGSRC_MESSAGE_RECIPIENTS?= # login names of recipients of any MESSAGE files which will be mailed # Possible: any login names # Default: none PKGSRC_SHOW_BUILD_DEFS?=yes # Show BUILD_DEFS definitions for a package when it is being built # (BUILD_DEFS are extra definitions which govern how some packages are # built and behave) # Possible: "yes", not "yes" # Default: "yes" .if defined(PKG_DEVELOPER) PKGSRC_SHOW_PATCH_ERRORMSG?=no .else PKGSRC_SHOW_PATCH_ERRORMSG?=yes .endif # Print a potentially helpful error message when the "patch" stage fails # Possible: "yes", not "yes" # Default: "no" if PKG_DEVELOPER is defined, "yes" otherwise PKGSRC_RUN_TEST?= no # Run test target before install # Possible: yes, no # Default: no PREFER_PKGSRC?= MesaLib Xft2 Xrandr Xrender expat fontconfig \ freetype2 glu randrext render xcursor PREFER_NATIVE?= yes # # When building packages, whether to prefer the pkgsrc or native # versions of software that's also part of the base system. Its value # can be either yes/no, or a list of packages as named in the # BUILDLINK_PACKAGES line in a package's buildlink[23].mk file. # Preferences are determined by the most specific instance of the # package in either PREFER_PKGSRC or PREFER_NATIVE. If a package is # specified in neither or in both variables, then PREFER_PKGSRC has # precedence over PREFER_NATIVE. # # Possible: yes, no, or a list of packages PREFER_NATIVE_PTHREADS?= yes # This toggles whether we prefer using the native pthreads implementation # or the pkgsrc OPR (see pthread.buildlink3.mk). This setting is # independent of the PREFER_* variables named above. #WRKOBJDIR= /usr/tmp # build here instead of in pkgsrc # Possible: any path # Default: not defined LOCALBASE?= /usr/pkg # Where non-X-based packages will be installed # Possible: any path # Default: /usr/pkg CROSSBASE?= ${LOCALBASE}/cross # Where "cross" category packages install # Possible: any path # Default: ${LOCALBASE}/cross VARBASE?= /var # Where files containing local state information are installed # Possible: any path # Default: /var #X11_TYPE?= native # Used to set the X11 implementation used to build X11 packages. # Possible: xorg (uses x11/xorg-libs), XFree86 (uses x11/XFree86-libs), or # native (uses pkgtools/x11-links to use the native, non-pkgsrc-managed X11). # Default: native # Default installation prefix for meta-pkgs/XFree86 and # meta-pkgs/xorg. .if defined(X11_TYPE) && !empty(X11_TYPE:MXFree86) X11ROOT_PREFIX?= XFree86 .elif defined(X11_TYPE) && !empty(X11_TYPE:Mxorg) X11ROOT_PREFIX?= xorg .else X11ROOT_PREFIX?= # empty .endif .if ((defined(X11_TYPE) && !empty(X11_TYPE:MXFree86) || \ defined(X11_TYPE) && !empty(X11_TYPE:Mxorg)) && \ defined(X11_TYPE) && empty(X11_TYPE:Mnative)) X11BASE?= ${LOCALBASE}/${X11ROOT_PREFIX} .endif #X11BASE?= /usr/X11R6 # Where X11 is installed on the system. # (and the default install path of X11 pkgs) # Possible: any path # Default: /usr/X11R6, /usr/openwin for Solaris MLDONKEY_GROUP?= mldonkey # System group to run mldonkey's core as. # Possible: any group name # Default: mldonkey #MOTIFBASE?= /usr/X11R6 # Where Motif-2.0-compatible headers and libraries are installed # on the system. # Possible: any path # Default: ${X11PREFIX} or where openmotif or lesstif is installed USE_XPKGWEDGE?= yes # Whether we should use xpkgwedge or not to install all packages into # ${LOCALBASE}. # Possible: yes, no # Default: yes BSDSRCDIR?= /usr/src # Where the NetBSD src module source tree is located # used in the emulators/plex86, emulators/vmware-module{,3}, net/arla, # sysutils/aperture, and sysutils/fdgw packages # Possible: any path # Default: /usr/src BSDXSRCDIR?= /usr/xsrc # Where the NetBSD xsrc module source tree is located # used in the x11/xservers package # Possible: any path # Default: /usr/xsrc DISTDIR?= ${PKGSRCDIR}/distfiles # Directory where original distribution # files are stored. # Possible: any path you like # Default: /usr/pkgsrc/distfiles #DIST_PATH= /cdrom/0/distfiles:${HOME}/distfiles # colon-delimited list of directories in which to search for # ${DISTFILES} and ${PATCHFILES}. If the requested file is not in any # of the directories in ${DIST_PATH}, it will be downloaded into # ${DISTDIR}. If the requested file is in one of the directories in # ${DIST_PATH}, a symbolic link will be made to it from ${DISTDIR}. # ${DIST_PATH} directories will will be searched before ${DISTDIR}, # letting a CD hold the main distfiles archive, and local ${DISTDIR} # hold any updated distfiles, for example. # Possible: any directories # Default: none DEFAULT_VIEW?= "" # This is the default view to which packages are added after installation. # Default: "" (the empty view) .if exists(${LOCALBASE}/bin/ftp) FETCH_CMD?= ${LOCALBASE}/bin/ftp .else FETCH_CMD?= /usr/bin/ftp .endif # Default program to fetch the files with pkgsrc. # Default: NetBSD's ftp(1). # Possible: any. .if ${FETCH_CMD:T} == "ftp" FETCH_RESUME_ARGS?= -R .else FETCH_RESUME_ARGS?= # empty .endif # Used when PKG_RESUME_TRANSFERS is enabled, to specify default argument # to resume transfers. # Default: -R # Possible: depends on your FETCH_CMD value. .if ${FETCH_CMD:T} == "ftp" FETCH_OUTPUT_ARGS?= -o .else FETCH_OUTPUT_ARGS?= # empty .endif # Used when PKG_RESUME_TRANSFERS is enabled, to specify default argument # in FETCH_CMD to fetch the file to a temporary name. # Default: -o # Possible: depends on your FETCH_CMD value. LIBTOOLIZE_PLIST?= yes # This determines whether to expand libtool archives (.la files) in PLISTs # into the represented library names. # Possible: yes, no # Default: yes PKG_INSTALLATION_PREFS?= overwrite pkgviews # This is a whitespace-separated list of installation types to try when # building a package, in order of preference. # Possible: any of: overwrite, pkgviews # Default: overwrite pkgviews PKG_RESUME_TRANSFERS?= NO # Used in pkgsrc to resume transfers, if enabled the whole file won't be # downloaded from scratch again. # Possible: yes or no. # Default: no. PKG_SYSCONFBASE?= ${PREFIX}/etc # This is the main config directory under which all package configuration # files should be found. # Possible: any path you like # Default: ${PREFIX}/etc RCD_SCRIPTS_DIR?= /etc/rc.d # This is the system rc.d script directory in which all rc.d scripts # expected to be executed at boot-time should be found. Package views # users may want to set this to "${PKG_SYSCONFBASEDIR}/rc.d". # Possible: any path you like # Default: /etc/rc.d PACKAGES?= ${PKGSRCDIR}/packages # Store generated packages on a per-architecture base # Possible: any path you like # Default: /usr/pkgsrc/packages PKGVULNDIR?= ${DISTDIR} # Specifies where the `vulnerabilities' file is located. This variable # is used by the audit-packages program and by pkgsrc itself to do security # checks before building/installing programs. # Possible: any path you like # Default: /usr/pkgsrc/distfiles #PASSIVE_FETCH= # Use ftp(1) in passive mode, for use behind filtering firewalls. # (Set by default in ftp(1) in NetBSD-current) # Possible: defined, not defined # Default: not defined PATCH_FUZZ_FACTOR?= -F0 # Fuzz factor to use when applying patches. Will only be applied when # using a patch(1) that understands -F. This should be a "?=" # setting, since package Makefiles may set this value, before # /etc/mk.conf is read. # Possible: "-Fn" where n is a number, none # Default: "-F0" #ACCEPTABLE_LICENSES= fee-based-commercial-use no-commercial-use \ # no-profit limited-redistribution # Whitespace-delimited list of the types of license which are # acceptable for installation. (Packages with licenses that qualify as # "open source" according to OSI or "Free" according to FSF are # not marked with a LICENSE variable.) Packages for which you need # to accept a license will display a message like the following: # ===> xv-3.10anb9 has an unacceptable license: xv-license. # ===> To view the license, enter "/usr/bin/make show-license". # ===> To indicate acceptance, add this line to your /etc/mk.conf: # ===> ACCEPTABLE_LICENSES+=xv-license # # Default: none #SPECIFIC_PKGS= # Don't use the default of all packages (from the top-level of the # pkgsrc tree), and use the values of the definitions # SITE_SPECIFIC_PKGS, HOST_SPECIFIC_PKGS, GROUP_SPECIFIC_PKGS, and # USER_SPECIFIC_PKGS. # Possible: defined, not defined # Default: not defined #SITE_SPECIFIC_PKGS= # List of packages that are wanted for each host on the site. Each # package in the list is of the form /. # Possible: any combination of packages # Default: not set #HOST_SPECIFIC_PKGS= # List of packages that are wanted for this particular host/machine. # Each package in the list is of the form /. # Possible: any combination of packages # Default: not set #GROUP_SPECIFIC_PKGS= # List of packages that are wanted for this group of users. Each # package in the list is of the form /. # Possible: any combination of packages # Default: not set #USER_SPECIFIC_PKGS= # List of packages that are wanted for this particular user. Each # package in the list is of the form /. # Possible: any combination of packages # Default: not set EXTRACT_USING?= nbtar # Use the specified tool to extract tar/ustar archives. # Possible: gtar, nbtar, pax # Default: nbtar #FAILOVER_FETCH= # Perform a checksum at "make fetch" time. If the checksum doesn't # match the stored value, try to retrieve the file from the next site # in the list # Possible: defined, not defined # Default: not defined #MASTER_SORT= .ac.at .at .de .ch .se .fi .no # Whitespace delimited list of preferred download locations. # MASTER_SITES and PATCH_SITES will be reordered according to the hosts' # address last components. # Possible: list of domain name suffixes # Default: none #MASTER_SORT_REGEX= ftp://.*/ # Same as MASTER_SORT, but takes a regular expression for more # flexibility in matching. Regexps defined here have higher priority # than MASTER_SORT. This example would prefer ftp transfers over # anything else. # Possible: Regexps as in awk(1) # Default: none #PATCH_DEBUG= # Used to debug patches as they are applied # Possible: defined, not defined # Default: not defined #PKG_FC= # The Fortran compiler used to compile Fortran code contained in # packages. # Possible: any Fortran compiler # Default: none #IMAKE?= ${X11BASE}/bin/imake ${IMAKEOPTS} # The imake binary to invoke. # Possible: any path followed by any valid flags # Default: ${X11BASE}/bin/imake ${IMAKEOPTS} #IMAKEOPTS= # Options passed to imake(1). The defaults ensure that imake finds the # correct commands. # Possible: any valid flags # Default: # for Solaris with gcc: # -DHasGcc2=YES -DHasGcc2ForCplusplus=YES # for IRIX: # -DMakeCmd=${PREFIX}/bin/bmake -DProjectRoot=${X11BASE} \ # -DManUsr=${PREFIX} .if ${OPSYS} == "IRIX" #IMAKEOPTS?= -DMakeCmd=${PREFIX}/bin/bmake -DProjectRoot=${X11BASE} \ # -DManUsr=${PREFIX} # ABI specific flags may be added during bootstrapping process or by hand: . if defined(ABI) . if ${ABI} == "32" #IMAKEOPTS+= -DBuildN32 . else #IMAKEOPTS+= -DBuild64bit . endif . endif # you may also wish to add ISA specific flags, such as "-DSgiISA32=4" if # you are compiling for mips4. .elif ${OPSYS} == "SunOS" # The flags required by imake with gcc on Solaris are automatically # added if gcc is being used. Though it should not be needed, you can # override this using: #IMAKEOPTS+= -DHasGcc2=YES -DHasGcc2ForCplusplus=YES .endif PRE_ROOT_CMD?= ${TRUE} # Command to be run by normal user, just before becoming root (see # SU_CMD) to install the package. For example, "chmod -R o+w ${WRKDIR}" # would allow others to write and modify files below ${WRKDIR}. # Possible: any shell commands # Default: none SETGIDGAME?= no # This flags specifies whether or not certain games are installed setgid, # which would allow them to write to a group-owned score file. # See also: GAMEGRP, GAMEMODE, GAMEOWN # Possible: yes, no # Default: no SU_CMD?= ${ROOT_CMD} # Command to perform before "make install", if the user does not have # an effective uid of 0. A possible substitute is "sudo sh -c" # Possible: su, sudo, or priv, with appropriate arguments # Default: dependent on operating system. For NetBSD: ${SU} - root -c SU_CMD_PATH_APPEND?=/sbin:/usr/sbin # Additional directories (in a colon separated list) to be added to the # PATH environment variable when running ${SU_CMD}. # Default: /sbin:/usr/sbin FATAL_OBJECT_FMT_SKEW?=yes # If there is a pre-requisite package, which has a different object format # from that currently being used, halt execution. One (rare) situation where # it is possible for the difference to be harmless is where the pre-requisite # package provides an executable, not a library. # Possible: yes, no # Default: yes WARN_NO_OBJECT_FMT?=yes # Packages installed on a machine before OBJECT_FMT was added to the # BUILD_DEFS definitions (on 29th September 1999) cannot say which # object format they are in. This will cause a warning to be displayed. # Set this to "no" to stop the warning message being shown. # Possible: yes, no # Default: yes #SMART_MESSAGES=yes # Display the make(1) target, and the current stack of packages being built, # when displaying messages during package builds. # Possible: defined, not defined # Default: not defined #BINPKG_SITES=... # Whitespace separated list of URLs for binary packages. Directories # "All" etc. are expected in the named place, variables "rel" and # "arch" are replaced with OS release ("1.5", ...) and architecture # ("mipsel", ...) # Possible: any ftp url, see above. # Default: ftp://ftp.NetBSD.org/pub/NetBSD/packages/$${rel}/$${arch} #BIN_INSTALL_FLAGS= # List of flags passed to pkg_add(8) in the bin_install package. # Possible: -v, -u, etc. See pkg_add(8) # Default: (no option) #LOCALPATCHES=... # Directory where local patches are stored. See pkgsrc/doc/pkgsrc.txt. # Possible: Any local directory # Default: none # # Definitions used only in the packages collection # #ACROREAD_FONTPATH?= ${PREFIX}/lib/X11/fonts/TTF # Colon separated list of additional directories for acroread7 to # look in for TTF/Type1 fonts. # Default: ${PREFIX}/lib/X11/fonts/TTF #AMANDA_SMB= # Used in amanda-client and amanda-dev-client to enable backup with # smbclient. # Possible: defined, not defined # Default: not defined AMANDA_USER?= backup # Used in the amanda packages to specify the login user and group # responsible for backups. # Possible: any user name # Default: backup AMANDA_TMP?= /tmp/amanda # Specifies the directory in which amanda puts its debug and temporary # files. # Default: /tmp/amanda AMANDA_VAR?= ${VARBASE}/amanda # Specifies the directory in which amanda puts its logs and status # files. # Default: ${VARBASE}/amanda #APACHE_CUSTOM_CFLAGS= # Used in apache to pass extra CFLAGS to the compiler during # the build. # Possible: any legal compiler flags, e.g. -O6 -DHARD_SERVER_LIMIT=512 # Default: not defined APACHE_USER?= www # Used in apache, apache2, isap, and smb2www to specify the user # allowed to execute the `suexec' wrapper. Expected to be the user the # httpd server normally runs as. # Possible: any user name # Default: www APACHE_GROUP?= www # Used in apache, apache2, squirrelmail, and iasp to specify # the default group of the user allowed to execute the `suexec' wrapper. # Expected to be the group the httpd server normally runs as. # Possible: any group name # Default: www #APACHE_SUEXEC_CONFIGURE_ARGS= --suexec-uidmin=1000 # Used in apache and apache2 to specify additional suexec options # to be passed to the configure script. # Possible: any --suexec-* options recognized by the Apache configure script. # Default: not defined APACHE_SUEXEC_DOCROOT?= ${LOCALBASE}/share/httpd/htdocs # Used in apache and apache2 to specify the document space in # which suexec will be allowed to work. # Possible: Any valid directory # Default: ${LOCALBASE}/share/httpd/htdocs ARLA_CACHE?= ${LOCALBASE}/cache # Used in arla to specify the location of the cache used by arla. Should # be on a local disk. # Default: ${LOCALBASE}/cache BIND_DIR?= ${VARBASE}/chroot/named # The directory for BIND system user. # Possible: any valid location # Default: ${VARBASE}/named BIND_GROUP?= named # System group to run the BIND name server as. Used by the "bind9" package. # Possible: any group name # Default: named BIND_USER?= named # System user to run the BIND name server as. Used by the "bind9" package. # Possible: any user name # Default: named #BULK_PREREQ= # Used during bulk package builds. Packages listed in this variable are # assumed to be required to build all packages. Only a very limited number # of packages belong in this variable. An example of an appropriate package # is pkgtools/xpkgwedge. Currently pkgtools/digest is always added to this # list. # Possible: category/pkg # Default: not defined CANNA_GROUP?= daemon # Used in the canna-server-bin package to specify the server group. # Possible: any group name # Default: daemon CANNA_USER?= daemon # Used in the canna-server-bin package to specify the server user. # Possible: any user name # Default: daemon #CDRECORD_CONF= ${PKG_SYSCONFDIR}/cdrecord.conf # The location of the cdrtools/cdrecord configuration file. The # sysutils/cdrecord pkg issues a warning if the cdrtools default of # /etc/default/cdrecord is changed, and the man pages are updated # accordingly. This is required by the cdrtools license. # Possible: any file name # Default: ${PKG_SYSCONFDIR}/cdrecord.conf CLAMAV_GROUP?= clamav # Used in clamav to specify the group to run clamav # Possible: any group name # Default: clamav CLAMAV_USER?= clamav # Used in clamav to specify the user to run clamav # Possible: any user name # Default: clamav CONSERVER_DEFAULTHOST?= localhost # Used by conserver package to specify the master server hostname. # Possible: any hostname # Default: localhost CONSERVER_DEFAULTPORT?= 782 # Used by conserver package to specify the default listen port. # Possible: 1-65535 # Default: 782 CUPS_GROUP?= sys # Used in cups to specify the group to run CUPS commands as. # Possible: any group name # Default: sys CUPS_USER?= lp # Used in cups to specify the user to run CUPS commands as and to create # temporary files in the /var/spool/cups/tmp directory. # Possible: any user name # Default: lp # CYRUS_IDLE # use METHOD for IMAP IDLE # METHOD is poll, idled or no # Default: not defined CYRUS_GROUP?= mail # Used in cyrus-imapd, cyrus-imapd21, cyrus-sasl, and cyrus-sasl2 to # specify the group used for installing setuid programs. # Possible: any group name # Default: mail CYRUS_USER?= cyrus # Used in cyrus-imapd, cyrus-imapd21, cyrus-sasl, and cyrus-sasl2 to # specify the userid used for installing setuid programs. # Possible: any user name # Default: cyrus DEFANG_GROUP?= defang # Used in the mimedefang package to specify the group to run commands as # Possible: any group name # Default: defang DEFANG_USER?= defang # Used in the mimedefang package to specify the user to run commands as # Possible: any user name # Default: defang DEFANG_SPOOLDIR?= ${VARBASE}/spool/MIMEDefang # Location of spool and quarantined files for the mimedefang package # Default: ${VARBASE}/spool/MIMEDefang #DEFAULT_IRC_SERVER= # Used in ircII to set the default irc server. # Possible: see the list at # http://www.irchelp.org/irchelp/networks/servers/efnet.html # Default: not defined #DEFAULT_SERIAL_DEVICE= # Used to provide a default setting for the serial device for # various packages which communicate over the serial port. # Possible: /dev/your_favorite_serial_device # Default: defaults for various machine_archs are set in mk/platform/${OPSYS}.mk DT_LAYOUT?= US # Used by dt package to specify the keyboard layout. # Possible: US, FI, FR, GER, DV # Default: FI ELK_GUI?= none # Used by elk to determine which GUI API modules are enabled. # Possible: none, or some combination of xaw and/or motif # Default: none EMACS_TYPE?= emacs21 # Used by emacs.mk to determine which emacs version should be installed and # emacs lisp packages should be built for. # Possible: emacs21, emacs21nox, emacs20, xemacs214, xemacs215 # Default: emacs21 EMACS_USE_POP?= yes # Used by emacs package to determine whether pop support is enabled or not. # Possible: yes, no # Default: yes #EMACS_USE_X= # Used by emacs package to determine whether X support is enabled or not. # If defined, the value is directly passed as argument of --with-x. # If not defined, the configure script will configure automatically. # Possible: yes, no, not defined # Default: not defined #EMACS_USE_X_TOOLKIT= # Used by emacs package to determine what kind of toolkit support is enabled. # If defined, the value is directly passed as argument of --with-x-toolkit. # If not defined or defined to yes, the configure script will pick up an # appropriate one. E.g, if X11R5 or later is found, lucid will be used. # Possible: yes, no, not defined, athena, lucid, motif # Default: not defined EXIM_GROUP?= mail # Used in the exim package to specify the server group. # Possible: any group name # Default: mail EXIM_USER?= mail # Used in the exim package to specify the server user. # Possible: any user name # Default: mail #FLUXBOX_USE_XINERAMA?= NO # Compile flukebox with xinerama extensions # Possible: YES, NO # Default: NO #FLUXBOX_USE_KDE?= NO # Compile flukebox with KDE support # Possible: YES, NO # Default: NO #FLUXBOX_USE_GNOME?= NO # Compile flukebox with GNOME support # Possible: YES, NO # Default: NO #FLUXBOX_USE_XFT?= YES # Compile flukebox with Xft support # Possible: YES, NO # Default: YES FOX_USE_XUNICODE?= YES # Used in fox to build in support for Unicode by XUnicode. See # http://www.ab.wakwak.com/~tino/jatk/fox/ (in japanese) for more information. # Possible: YES, NO # Default: YES FREEWNN_USER?= wnn # Used in the ja-freewnn-server-bin package to specify the Free wnn user. # Possible: any user name # Default: wnn FREEWNN_GROUP?= jserver # Used in the ja-freewnn-server-bin package to specify the Free wnn group. # Possible: any group name # Default: jserver .if !empty(SETGIDGAME:M[yY][eE][sS]) GAMEDATAMODE?= 664 .else GAMEDATAMODE?= ${SHAREMODE} .endif # Used for various games to allow writing to a group-owned score file. # See also: GAMEMODE, GAMEOWN, SETGIDGAME # Possible: any file ownership # Default: ${SHAREMODE} if SETGIDGAME is not set to 'yes', 644 otherwise GAMEGRP?= ${BINGRP} # Used for various games to allow writing to a group-owned score file. # If SETGIDGAME is 'yes', setting this to a dedicated group, such as 'games' # would make sense. # See also: GAMEMODE, GAMEOWN, SETGIDGAME # Possible: any group name # Default: ${BINGRP} GAMEMODE?= ${BINMODE} # Used for various games to allow writing to a group-owned score file. # If SETGIDGAME is 'yes', setting this to 2555 would make sense. # See also: GAMEGRP, GAMEOWN, SETGIDGAME # Possible: any mode # Default: ${BINMODE} GAMEOWN?= ${BINOWN} # Used for various games to allow writing to a group-owned score file. # If SETGIDGAME is 'yes', setting this to a dedicated user, such as 'games' # would make sense. # See also: GAMEGRP, GAMEMODE, SETGIDGAME # Possible: any user name # Default: ${BINOWN} GNU_PROGRAM_PREFIX?= g # This is the prefix to add for GNU programs, like gls or gnutouch. # Possible: g, gnu, empty, ... # Default: g #GRUB_NETWORK_CARDS= # Compile netboot support for the listed network interface cards into GRUB. # Use e.g. "rtl8139" for RealTek 8139 support or "eepro100 epic100" for # Intel Etherexpress Pro/100 and SMC EtherPower II support. # Default: not defined (-> no netboot support) #GRUB_PRESET_COMMAND= # Specifies a single command that will be embedded into GRUB's stage2 and # executed at boot time as a default configuration file. This is usually # useful to create stage2 files with automated diskless support; you should # set this variable to "bootp", "dhcp" or "rarp", and use it together # GRUB_NETWORK_CARDS. # Default: not defined #GRUB_SCAN_ARGS= # Can be used to supply additional configure arguments for netboot support in # GRUB. Set e.g. "GRUB_NETWORK_CARDS" to "ne" and "GRUB_SCAN_ARGS" to # "--enable-ne-scan=0x300" to let the boot loader search for an NE 2000 ISA # card at I/O offset 0x300. # Default: not defined ICECAST_CHROOTDIR?= ${VARBASE}/chroot/icecast # Used in icecast2 to specify the chroot directory in which icecast # will be allowed to work. # Possible: Any valid directory # Default: ${VARBASE}/chroot/icecast #ICECAST_CHUNKLEN=512 # If you want a larger backlog for each client, which will allow for # worse network congestion or other network errors before kicking the # client, increase the ICECAST_CHUNKLEN value. # Default: 64 #ICECAST_SOURCE_BUFFSIZE=8192 # SOURCE_BUFFSIZE sets how many bytes will be read from the source # before trying to send this chunk to the clients. If your server will # take on a lot of listeners, or stream very high bitrate mpeg data, # like video mpeg streams, and if you system supports it, you should # increase this value to 65535 or something similar. # Default: 8192 IMAP_UW_CCLIENT_MBOX_FMT?= unix # Used in imap-uw to set the default format used by c-client programs for # new mailbox creation. Check the UW IMAP documentation for more details # regarding the pros and cons of the various mailbox formats. # # Possible: mbox, mbx, mh, mmdf, mtx, mx, news, phile, tenex, unix # Default: unix #IMAP_UW_MAILSPOOLHOME=.MailBox # To default user mailboxes to their home directory, # specify the name of the mailbox file. # Possible: Any valid filename, not defined # Default: not defined #IMAP_UW_NO_CLEARTEXT?= YES # Used in imap-uw to disallow plaintext passwords except when SSL or TLS # is used. This effectively disallows cleartext passwords. # # Possible: not defined, YES # Default: not defined #IMAP_UW_NO_SSL?= YES # Used in imap-uw to build without any SSL or TLS support at all. Note that # it doesn't make any sense to enable this together with IMAP_UW_NO_CLEARTEXT, # nor is is it fully supported in pkgsrc for all clients. # # Possible: not defined, YES # Default: not defined IMDICTDIR?= ${VARBASE}/dict # Specify the directory for input method's dictionary installation. # Possible: any valid location # Default: ${VARBASE}/dict INN_DATA_DIR?= ${VARBASE}/news # Used by inn to specify the data directory. # Possible: any path you like # Default: ${VARBASE}/news INN_USER?= news # Used by inn to specify the username # Possible: any valid username # Default: news INN_GROUP?= news # Used by inn to specify the groupname # Possible: any valid groupname # Default: news IRCD_HYBRID_SMALL_NET?= YES # Used by ircd-hybrid to tune various ircd paramaters when running # small IRC networks so the daemon does not use much resources. # A set of variables - see below - can then be defined to fine tune the daemon # behaviour. # Possible: YES, NO # Default: YES #IRCD_HYBRID_LINK_PREALLOCATE= # Used by ircd-hybrid when IRCD_HYBRID_SMALL_NET is "YES". Specify # the number of server linkd to preallocate. # Possible: nearly any integer value # Default: 1024 from source, 64 if IRCD_HYBRID_SMALL_NET is "YES" #IRCD_HYBRID_CLIENTS_PREALLOCATE= # Used by ircd-hybrid when IRCD_HYBRID_SMALL_NET is "YES". Specify # the number of client structures to preallocate. # Possible: nearly any integer value # Default: 1024 from source, 64 if IRCD_HYBRID_SMALL_NET is "YES" #IRCD_HYBRID_USERS_PREALLOCATE= # Used by ircd-hybrid when IRCD_HYBRID_SMALL_NET is "YES". Specify # the number of user structures to preallocate. # Possible: nearly any integer value # Default: 1024 from source, 64 if IRCD_HYBRID_SMALL_NET is "YES" #IRCD_HYBRID_NICKNAMEHISTORYLENGTH= # Used by ircd-hybrid when IRCD_HYBRID_SMALL_NET is "YES". Specify # the number of entries in the nickname history. # Possible: nearly any integer value # Default: 15000 from source, 1000 if IRCD_HYBRID_SMALL_NET is "YES" #IRCD_HYBRID_MAXSENDQLENGTH= # Used by ircd-hybrid when IRCD_HYBRID_SMALL_NET is "YES". Specify # the maximum -in bytes- of internal send buffering for sockets. # Possible: nearly any integer value # Default: 9000000 from source, 500000 if IRCD_HYBRID_SMALL_NET is "YES" #IRCD_HYBRID_INITIAL_DBUFS= # Used by ircd-hybrid when IRCD_HYBRID_SMALL_NET is "YES". Specify # the initial number of dbufs (dynamic buffering of a byte stream, # similar to mbufs) to preallocate. # Possible: nearly any integer value # Default: 4000 from source, 300 if IRCD_HYBRID_SMALL_NET is "YES" #IRCD_HYBRID_HARD_FDLIMIT_= # Used by ircd-hybrid when IRCD_HYBRID_SMALL_NET is "YES". Specify # the maximum number of file descriptor the daemon will use. # Possible: 1 <> maximum file descriptor the system would give you # Default: 256 from source, 90 if IRCD_HYBRID_SMALL_NET is "YES" #IRCD_HYBRID_INIT_MAXCLIENTS= # Used by ircd-hybrid when IRCD_HYBRID_SMALL_NET is "YES". Specify # the maximum number of clients allowed to connect to the daemon. # Possible: 1<> ~IRCD_HYBRID_HARD_FDLIMIT_ # Default: 200 from source, 40 if IRCD_HYBRID_SMALL_NET is "YES" IRCD_HYBRID_USE_LOGFILE?= YES # Used by ircd-hybrid. Specify if the daemon should use a logfile. # Note: can be used even when IRCD_HYBRID_USE_SYSLOG is "YES". # Possible: YES, NO # Default: YES IRCD_HYBRID_USE_SYSLOG?= NO # Used by ircd-hybrid. Specify if the daemon should use syslog. # Note: can be used even when IRCD_HYBRID_USE_LOGFILE is "YES". # Possible: YES, NO # Default: NO IRCD_HYBRID_LPATH?= ${VARBASE}/log/ircd-hybrid.log # Used by ircd-hybrid. Specify the pathname of the daemon logfile. # Note: only used if IRCD_HYBRID_USE_LOGFILE is "YES". # Possible: any path # Default: ${VARBASE}/log/ircd-hybrid.log IRCD_HYBRID_FNAME_USERLOG?= ${VARBASE}/log/ircd-hybrid.users.log # Used by ircd-hybrid. Specify the pathname of the user connections logfile. # IRCD_HYBRID_USE_SYSLOG should be set to "YES" for this logfile be used. # Possible: any path # Default: ${VARBASE}/log/ircd-hybrid.users.log IRCD_HYBRID_FNAME_OPERLOG?= ${VARBASE}/log/ircd-hybrid.opers.log # Used by ircd-hybrid. Specify the pathname of the operator connections # logfile. # Possible: any path # Default: ${VARBASE}/log/ircd-hybrid.opers.log IRCD_HYBRID_PPATH?= ${VARBASE}/run/ircd-hybrid.pid # Used by ircd-hybrid. Specify the pathname of the daemon pid file. # Possible: any path # Default: ${VARBASE}/run/ircd-hybrid.pid IRCD_HYBRID_SYSLOG_FACILITY?= LOG_LOCAL4 # Used by ircd-hybrid. Specify which syslog facility the daemon should use # when IRCD_HYBRID_USE_SYSLOG is "YES". # Possible: any syslog facility (LOG_*) # Default: LOG_LOCAL4 IRCD_HYBRID_INIT_LOG_LEVEL?= L_NOTICE # Used by ircd-hybrid. Specify initial minimum level from which the daemon logs # events. This is unrelated from syslog() level. # Possible: L_CRIT, L_ERROR, L_WARN, L_NOTICE, L_TRACE, L_INFO, L_DEBUG # Default: L_NOTICE IRCD_HYBRID_IRC_USER?= irc # Used by ircd-hybrid. Specify the user name under which the daemon runs. # Possible: any user name # Default: irc IRCD_HYBRID_IRC_GROUP?= irc # Used by ircd-hybrid. Specify the group name under which the daemon runs. # Possible: any group name # Default: irc IRCD_HYBRID_NETWORK_NAME?= PKGSRCNet # Used by ircd-hybrid. Specify the IRC network name advertised by the daemon. # Possible: anything # Default: PKGSRCNet IRCD_HYBRID_NETWORK_DESC?= Package Source Network # Used by ircd-hybrid. Specify the IRC network description advertised by the # daemon. # Possible: anything # Default: Package Source Network #IRRD_USE_PGP= # Used by irrd package to specify the version of PGP to use, if any. # Possible: 5, 2, not defined # Default: not defined # [XXX: configure will locate pgpv or pgp] #XLOCK_DEFAULT_MODE= #JB_FQHOSTNAME= # Used by jitterbug package to include the fully-qualified domain name # of the host. # Possible: defined, not defined # default: not defined JB_GROUP?=jitter # Used by jitterbug package for groupname # Possible: any valid groupname # Default: jitter JB_GROUPID?=509 # Used by jitterbug package for gid of JB_USER. # Possible: any valid gid # Default: 509 #JB_LOCALMAIL= # Used by jitterbug package as the mail alias to receive mail from # jitterbug # Possible: any valid mail alias # Default: none JB_PACKAGE?= test # Used by jitterbug to determine the type of package to be installed. # Possible: test, production # Default: test JB_USER?=jitter # Used by jitterbug package for username # Possible: any valid username # Default: jitter JB_USERID?=509 # Used by jitterbug package for uid of JB_USER. # Possible: any valid uid # Default: 509 JABBERD_USER?= jabberd # Used in jabberd to specify the user used to run the daemon. # Possible: any valid username # Default: jabberd JABBERD_GROUP?= jabberd # Used in jabberd to specify the group userd to run the daemon. # Possible: any valid group # Default: jabberd JABBERD_LOGDIR?= ${VARBASE}/log/jabberd # Used in jabberd to specify the default directory under which log # files are placed. # Possible: any directory # Default: ${VARBASE}/log/jabberd JABBERD_SPOOLDIR?= ${VARBASE}/spool/jabberd # Used in jabberd to specify the default directory under which server # information is stored. # Possible: any directory # Default: ${VARBASE}/spool/jabberd JABBERD_PIDDIR?= ${VARBASE}/run/jabberd # Used in jabberd to specify the default directory under which pid # files are placed. # Possible: any directory # Default: ${VARBASE}/run/jabberd JAKARTA_HOME?= ${JAVA_HOME}/jakarta # Used by the www/jakarta-tomcat package to choose an install location # Possible: any directory # Default: ${JAVA_HOME}/jakarta #JAVA_HOME= # Location of jvm to be used by pkgsrc. Java-based packages will be installed # in ${LOCALBASE}/lib/java, so that they are available to all jvms. # # Possible: any directory # Default: home of JVM chosen by ${PKG_JVM} JDK_HOME?= ${LOCALBASE}/java # Used by the lang/JDK package to choose an install location # Possible: any directory, e.g. /usr/jdk # Default: ${LOCALBASE}/java JSDK_HOME?= ${JAVA_HOME}/jsdk # Location for Java Servlet Development Kit installed by www/jsdk20 # Possible: any directory # Default: ${JAVA_HOME}/jsdk #JWHOIS_ENABLE_CACHE= # Enable cache option in net/jwhois package. # Possible: defined or not defined. # Default: not defined. #KERBEROS= # Used in many packages to specify use of a Kerberos (or compatible) # subsystem. Requires Kerberos libraries in /usr/lib. # Possible: defined, not defined # Default: not defined #KERMIT_SUID_UUCP # If set to YES or yes, install kermit binary set-uid uucp. Permits an # unprivileged user to access the serial ports, with default permissions # on the /dev/tty0* special files. # Possible: YES, yes, not defined # Default: not defined #KJS_USE_PCRE= # Used in kdelibs2 to determine if kjs (javascript) should use Perl # Compatible Regular Expressions (pcre) # Possible: yes, not defined # Default: not defined #KNEWS_DOMAIN_FILE= # Used in the knews package to set the domain name from the contents # of this file. # Possible: any valid path # Default: none #KNEWS_DOMAIN_NAME= # Used in the knews package to set the domain name. # Possible: almost anything really, usually a FQDN. # Default: none #KTERM_USE_WALLPAPER= # Used in kterm package to support wallpaper # Possible: not defined, YES # Default: not defined #LIBDVDCSS_HOMEPAGE= # Used in libdvdcss package as the homepage - we are unable to point this # to one of the real sites for legal reasons # Possible: any libdvdcss site # Default: not defined #LIBDVDCSS_MASTER_SITES= # Used in libdvdcss package as the master site - we are unable to point this # to one of the real sites for legal reasons # Possible: any libdvdcss site # Default: not defined #LATEX2HTML_ICONPATH= # Used in the latex2html package to set URL prefix for where to # find latex2html's icons. # Possible: a URL prefix # Default: none LEAFNODE_DATA_DIR?= ${VARBASE}/news # Used by leafnode to specify the data directory. # Possible: any path you like # Default: ${VARBASE}/news # Note: default is the same as INN_DATA_DIR LEAFNODE_USER?= news # Used by leafnode to specify the username # Possible: any valid username # Default: news # Note: default is the same as INN_USER LEAFNODE_GROUP?= news # Used by leafnode to specify the groupname # Possible: any valid groupname # Default: news # Note: default is the same as INN_GROUP LINUX_LOCALES?= \ af ar bg br ca cs cy da de el en eo es et eu fi fo fr ga gl \ he hr hu hy id is it ja ka kl ko lo lt lv nl no oc pl pt ro \ ru sk sl sr sv th tr uk vi wa zh # Used in linux-locale package to install specify language(s) # Possible: af ar bg br ca cs cy da de el en eo es et eu fi fo fr ga gl \ # he hr hu hy id is it ja ka kl ko lo lt lv nl no oc pl pt ro \ # ru sk sl sr sv th tr uk vi wa zh # Default: all languages LSOF_MORE_SECURE?= 0 # Used in lsof to specify that non-root users can only view their own files # Possible: 0 (allow non-root users to view all open files), or # 1 (only allow root to view all open files) # Default: 0 LSOF_LESS_SECURE_SOCKETS?= 0 # Used in lsof to specify that non-root users should still be able to view # all open sockets even if LSOF_MORE_SECURE is set. If LSOF_MORE_SECURE is # not set (ie, is zero), this option has no effect. # Possible: 0 (don't allow non-root users to see sockets they don't own) # 1 (allow all sockets to be viewed at all times) # Default: 0 #M68060= # Used mostly by packages (e.g.: gnupg, pgp2, ssh) which have fast # 68020/030/040 assembler routines for multiprecision arithmetic # which use the 32/64bit mul/div instruction. These instructions are # software emulated on the 68060, thus very slow. Set to YES when # compiling for the 68060 cpu. # Possible: not defined, YES. # Default: not defined. MAJORDOMO_GROUP?= majordom # Used by the majordomo package as the groupid majordomo runs at. # Possible: any # Default: majordom MAJORDOMO_TMPDIR?= ${VARBASE}/tmp # Used by the majordomo package as the directory to store temp files. # Possible: any directory. # Default: ${VARBASE}/tmp MAJORDOMO_USER?= majordom # Used by majordomo package as the userid majordomo runs at. # Possible: any # Default: majordom #MAKEINFO_ARGS?= # flags to be passed to makeinfo(1), if any. Warning: only use if you # know what you're doing, may break PLISTs. # Possible: any valid flag for makeinfo(1) # Default: may set info files size for consistency across platforms and # makeinfo version, also various machine_archs arguments may be set in # mk/platform/${OPSYS}.mk with the _OPSYS_MAKEINFO_ARGS variable. MLDONKEY_HOME?= ${VARBASE}/mldonkey # Directory where mldonkey will keep all configuration files and downloads # when started with the rc.d script provided in the mldonkey package. # Possible: any path # Default: ${VARBASE}/mldonkey MLDONKEY_USER?= mldonkey # System user to run mldonkey's core as. # Possible: any user name # Default: mldonkey MONOTONE_GROUP?= monotone # System group to run the dedicated Monotone server as. Used by the # monotone-server package. # Possible: any group name # Default: monotone MONOTONE_USER?= monotone # System user to run the dedicated Monotone server as. Used by the # monotone-server package. # Possible: any user name # Default: monotone #MOZILLA_USE_LINUX= # Used by mozilla binary packages to prefer the use of Linux # compatibility instead of native builds. # Possible: set, unset # Default: unset MOZILLA_USE_XFT?= NO # Used by mozilla packages to enable Xft support where available. # The mozilla-gtk2 package sets this value to YES unconditionally. # Possible: YES, NO # Default: NO #MOTIF_TYPE?= openmotif # Used by motif.buildlink3.mk to choose which Motif-2.0-compatible # installation to use. This value is also automatically set by # motif.buildlink3.mk to whichever Motif-2.0 installation represented by # the possible values below is already installed, but defaults to # ${MOTIF_TYPE_DEFAULT}. This value is ignored if MOTIFBASE is # explicitly set. # Possible: openmotif, lesstif, dt (Irix and Solaris only) # Default: ${MOTIF_TYPE_DEFAULT} #MOTIF_TYPE_DEFAULT?= openmotif # Used by motif.buildlink3.mk as the final default value for MOTIF_TYPE. # Possible: openmotif, lesstif, dt (Irix and Solaris only) # Default: openmotif, or dt (Irix and Solaris only) #MPG123_ARM_FIXED64=YES # Used by mpg123 and mpg123-esound to enable ARM to use 64bit fixedpoint # Possible: not defined, YES # Default: not defined MTOOLS_ENABLE_FLOPPYD?= NO # Used by the mtools package to determine whether or not the floppyd # program is installed. X11 libraries and header files are needed to # build floppyd and run floppyd. # Possible: YES, NO # Default: NO #MYSQL_USER?= mysql # The username of the mysql administrator. # Possible: any user name # Default: mysql #MYSQL_GROUP?= mysql # The group of the mysql administrator. # Possible: any group name # Default: mysql #MYSQL_DATADIR?= ${VARBASE}/mysql # Home directory of the mysql administrator and location of the # database files. # Possible: any directory # Default: ${VARBASE}/mysql #MYSQL_CHARSET= latin1 # default character set of mysql. # Possible: big5, cp1251, cp1257, croat, czech, danish, dec8, dos, estonia, # euc_kr, gb2312, gbk, german1, greek, hebrew, hp8, hungarian, # koi8_ru, koi8_ukr, latin1, latin2, latin5, swe7, usa7, win1250, # win1251ukr, ujis, sjis and tis620 # Default: latin1 #MYSQL_EXTRA_CHARSET= all # additional charsets to be compiled in mysql. # Possible: none, compolex, all or list selected from MYSQL_CHARSET's # possible values. NMH_EDITOR?= vi # default editor for use in nmh. # Possible: any editor. # Default: vi NMH_MTA?= smtp # default MTA for use in nmh. # Possible: smtp or sendmail. # Default: smtp NMH_PAGER?= more # default pager for use in nmh. # Possible: any pager. # Default: more #NS_PREFERRED= # Used by netscape to determine preferred browser to open # Possible: not defined, communicator, navigator, mozilla # Default: not defined, which implies communicator #NS_NO_FLASH= # Used by navigator/communicator package to decide if flash should be # installed or not. By default, flash is installed. # Possible: not defined, defined # Default: not defined #NS_USE_BSDI= YES # Used to decide if i386 BSDi Netscape binary should be used in preference # to linux version. # Possible: not defined, YES # Default: not defined #NS_USE_SUNOS= YES # Used to decide if sparc SunOS-4.1 Netscape binary should be used in preference # to the Solaris-2.5.1 version. # Possible: not defined, YES # Default: not defined OPENSSH_CHROOT?= ${VARBASE}/chroot/sshd # The chroot directory for OpenSSH with privilege separation. This directory # will be created and MUST be only readable by root. # Possible: any directory # Default: ${VARBASE}/chroot/sshd OPENSSH_USER?= sshd # The unprivileged user for OpenSSH with privilege separation. # Possible: any user name # Default: sshd OPENSSH_UID?= 16 # The unprivileged UID for OpenSSH with privilege separation. # Possible: any uid # Default: 16 OPENSSH_GROUP?= sshd # The group of the OPENSSH_USER for OpenSSH with privilege separation. # Possible: any group name # Default: sshd OPENSSH_GID?= 16 # The GID of the OPENSSH_USER for OpenSSH with privilege separation. # Possible: any gid # Default: sshd P4USER?= perforce # The unprivileged user for the Perforce server. # Possible: any user name # Default: perforce P4GROUP?= p4admin # The group of the P4USER for the Perforce server. # Possible: any group name # Default: p4admin P4ROOT?= ${VARBASE}/perforce # The directory where the Perforce server will store its depot. # Possible: any directory # Default: ${VARBASE}/perforce P4PORT?= 1666 # The TCP port on which the Perforce server will listen. # Possible: any port # Default: 1666 PALMOS_DEFAULT_SDK?= 3.5 # Version of PalmOS SDK to use as default. # Possible: 1, 2, 3.1, 3.5 # Default: 3.5 PAPERSIZE?= A4 # Default paper size for packages. # Possible: A4, Letter. # Default: A4 PGGROUP?= pgsql # Used in postgresql package as the groupname of the database # administrator # Possible: any group name # Default: pgsql PGUSER?= pgsql # Used in postgresql package as the username of the database admin # Possible: any user name # Default: pgsql PGHOME?= ${PREFIX}/${PGUSER} # Used in postgresql package as the home directory for the database # administrator # Possible: any valid location # Default: ${PREFIX}/${PGUSER} #PGSQL_USE_HIER?= yes # Add support for hierarchical queries with Oracle like CONNECT BY syntax # to the PostgreSQL 7.4 package. # See http://gppl.moonbone.ru/README.html for details. # Possible: undefined, yes # Default: undefined #PG_MB_ENCODING= SQL_ASCII # Used to postgresql package to define the language encoding of the # backend server process. # Possible: SQL_ASCII, EUC_JP, EUC_CN, EUC_KR, EUC_TW, UNICODE, MULE_INTERNAL, # LATIN1, LATIN2, LATIN3, LATIN4, LATIN5, KOI8, WIN, ALT # Default: undefined PILRC_USE_GTK?= YES # Use gtk+ in pilrc, needed for the UI previewer. # Possible: YES, NO # Default: YES PKG_INSTALLATION_TYPES?= overwrite # This is a whitespace-separated list of installation types supported # by the package. # # *NOTE*: This variable *must* be set in the package Makefile *before* # the inclusion of bsd.prefs.mk. # # Possible: any of: overwrite, pkgviews # Default: overwrite #PKG_JVM= # Used to choose a java virtual machine for packages which use Java. # ${JAVA_HOME} will be set based on this choice, if unset # Possible: jdk, sun-jdk, blackdown-jdk13, kaffe (kaffe currently has some problems) # Default: jdk on NetBSD/i386, blackdown-jdk13 on powerpc, kaffe elsewhere PKG_LANG?=english # Used to specify preferred language settings # Currently only used by www/netscape7 and misc/openoffice # Possible: depends on packages supporting this variable, basically any # language. Should be '_' or '', for example 'english_uk', # 'german' or 'portuguese_br'. # Default: english #POPTOP_USE_MPPE= # Used in poptop package to specify the use of the mppe-ppp package # in preference to the standard ppp # Possible: defined, not defined # Default: not defined PURE_FTPD_USE_MYSQL?= NO # Compile in MySQL support. # Possible: YES, NO # Default: NO PURE_FTPD_USE_PGSQL?= NO # Compile in PostgreSQL support. # Possible: YES, NO # Default: NO PURE_FTPD_USE_TLS?= NO # Compile in SSL/TLS support. # Possible: YES, NO # Default: NO PURE_FTPD_USE_VIRTUAL_CHROOT?= NO # Compile in virtual chroot support (enables the ability # to follow symlinks outside a chroot jail). # Possible: YES, NO # Default: NO #PROCMAIL_MAILSPOOLHOME=.MailBox # To default user mailboxes to their home directory, # specify the name of the mailbox file. # Possible: Any valid filename, not defined # Default: not defined PROCMAIL_TRUSTED_IDS?=0 # To allow all users to use the "-f" switch set this to 0. # Possible: A list of users, terminated by a zero. # Default: see Makefile .if exists(/usr/bin/ssh) PVM_SSH?= /usr/bin/ssh .else PVM_SSH?= ${LOCALBASE}/bin/ssh .endif # Specify the rsh/ssh program used by pvm to communicate between # systems. # Possible: Any rsh/ssh program. # Default: /usr/bin/ssh if it exists, otherwise ${LOCALBASE}/bin/ssh QMAILDIR?= /var/qmail # The directory for qmail installation. You probably don't need to # change this. # Possible: any valid location # Default: /var/qmail (intentionally not ${VARBASE}/qmail) QMAIL_QFILTER_TMPDIR?= ${VARBASE}/tmp/qmail-qfilter # The temporary directory for qmail-qfilter. # Possible: a directory writable only by qmail-qfilter's UID # Default: ${VARBASE}/tmp/qmail-qfilter QMAIL_QUEUE_DIR?= ${VARBASE}/spool/qmail # The directory for qmail's queue. # Possible: any location on an appropriate filesystem, except that it # must be outside ${QMAILDIR}. # Default: ${VARBASE}/spool/qmail QMAIL_QUEUE_EXTRA?= # An additional recipient that will be added to every qmail delivery. # This is used primarily for logging. # Possible: empty, any valid local address # Default: empty QPOPPER_FAC?= LOCAL1 # Used by qpopper package as the default syslog facility. # Possible: syslog(3)'s facility string without preceding "LOG_". # Default: LOCAL1 QPOPPER_USER?= pop # Used by qpopper package as the owner of apop database and qpopauth # command runs at. # Possible: any # Default: pop #QPOPPER_SPOOL_DIR= # Used by qpopper package to define the mail spool directory, # overriding the hardcoded directories searched for by the configure # script. # Possible: any location on an appropriate filesystem. # Default: not defined RASMOL_DEPTH?= 8 # Used in rasmol package to choose display depth to compile the package # for, since it only supports one at a time. # Possible: 8, 16, 32 # Default: 8 RPM_DB_PREFIX?= ${VARBASE}/pkg # Used in the rpm package to note the prefix of the path to the RPM # databases. The RPM databases are stored in ${RPM_DB_PREFIX}/lib/rpm. # Possible: any valid location, e.g. ${LOCALBASE} # Default: ${VARBASE}/pkg #RSSH_SCP_PATH= # Used in the rssh package to specify pathname to scp(1) # Possible: any valid pathname for scp command # Default: not defined #RSSH_SFTP_SERVER_PATH= # Used in the rssh package to specify pathname to sftp-server(8) # Possible: any valid pathname for sftp-server command # Default: not defined #RSSH_CVS_PATH= # Used in the rssh package to specify pathname to cvs(1) # Possible: any valid pathname for cvs command # Default: not defined #RSSH_RDIST_PATH= # Used in the rssh package to specify pathname to rdist(1) # Possible: any valid pathname for rdist command # Default: not defined #RSSH_RSYNC_PATH= # Used in the rssh package to specify pathname to rsync(1) # Possible: any valid pathname for rsync command # Default: not defined #SAWFISH_THEMES= # Specifies the DISTFILES for wm/sawfish-themes, to allow the user to choose # which themes to install # Possible: empty, any number of theme-name-[0-9]*.*.tar.gz # Default: Set to include about 180 themes available on themes.freshmeat.net SCREWS_GROUP?= www # Used in the screws package to specify the user under which the server # should be run. # Possible: any user name # Default: screws SCREWS_USER?= screws # Used in the screws package to specify the user under which the server # should be run. # Possible: any user name # Default: screws SDIST_PAWD?= pwd # If you are using amd you'll want to use pawd instead of pwd to derive # the current working directory. # Possible: pawd, pwd # Default: pwd #SERIAL_DEVICES= # Used to provide a default setting for all the serial devices for # various packages which communicate over the serial port. # Possible: /dev/your_favorite_serial_device0 /dev/your_favorite_serial_device1 ... # Default: defaults for various machine_archs are set in mk/bsd.prefs.mk SILC_CLIENT_WITH_PERL?= YES # Used to decide whether perl scripting support will be compiled. # Possible: YES, NO # Default: YES #SPARC_TARGET_ARCH= sparcv7 # Select SPARC target architecture under Solaris. # Possible: sparcv7, sparcv8 or sparcv9. # Default: sparcv7 #SPOP3D_ENABLE_APOP= yes # Enable APOP support in the mail/solid-pop3d package. # Possible: undefined, defined # Default: undefined #SPOP3D_ENABLE_STANDALONE= yes # Build mail/solid-pop3d to run standalone instead of via inetd. # Possible: undefined, defined # Default: undefined #SPOP3D_ENABLE_ALIASES= yes # Build mail/solid-pop3d with support for user names mapping and non-IP # based virtuals. # Possible: undefined, defined # Default: undefined #SQUID_CONFIGURE_ARGS= # Used in squid package to set build configuration options. # Possible: see "configure --help" # Default: --enable-cachemgr-hostname=localhost # --enable-icmp # --enable-ipf-transparent # --enable-snmp SSH_RSHPATH?= ${RSH} # Used in ssh to specify standard rsh path # Possible: path to rsh binary # Default: platform dependent; ${RSH} set in mk/platform/${OPSYS}.mk SSH_SUID?= NO # Used in ssh to enable setuid installation of "ssh" binary. # Possible: YES, or NO. # Default: NO SSYNC_PAWD?= pwd # If you are using amd you'll want to use pawd instead of pwd to derive # the current working directory. # Possible: pawd, pwd # Default: pwd SUN_JRE14_USE_JCE?= NO # Whether to include the Java Cryptography Extension (JCE) Unlimited Strength # Jurisdiction Policy Files in the sun-jre14 package # Possible: YES or NO. # Default: NO SUN_JRE15_USE_JCE?= NO # Whether to include the Java Cryptography Extension (JCE) Unlimited Strength # Jurisdiction Policy Files in the sun-jre15 package # Possible: YES or NO. # Default: NO .if empty(MACHINE_PLATFORM:MNetBSD-1*-*) SUSE_PREFER?= 9.1 .else SUSE_PREFER?= 7.3 .endif # Which version of the suse packages to prefer. # Decides if you want to use 9.1 (default) or 7.3 (pre NetBSD-2) by default. # Possible: 7.3, 9.1 # Default: 9.1 in 2.0 and later, 7.3 otherwise TIN_USE_INN_SPOOL?= NO # Used to enable reading directly in an inn spool. # Possible: YES, or NO. # Default: NO #TEXMFSITE= # Used in TeXfamily package which depends on teTeX package to specify # site-local texmf configuration. # Since teTeX package uses ${PREFIX}/share/texmf directory, TeXfamily # package uses ${PREFIX}/share/texmf.local. Therefore, though you can # use /usr/local/share/texmf as TEXMFSITE, it causes a conflict if you # set ${PREFIX} to /usr/local. Use another path in such a case. # Possible: any valid path # Default: none #THTTPD_LOG_FACILITY?= LOG_DAEMON # Used by the thttpd package to choose the log facility used # by thttpd for its syslogd(8) messages. # Possible: see "facility codes" in /usr/include/syslog.h # Default: LOG_DAEMON UNPRIVILEGED?= NO # Set this to YES to enable unprivileged support (see mk/unprivileged.mk). # Possible: YES, NO # Default: NO USE_CANNA?= YES # Used in kinput2 and nvi-m17n to enable Canna kana-kanji converter # support. # Possible: YES, or NO. # Default: YES USE_CRYPTO?= YES # Used in speakfreely to choose support for encrypted connections. # Possible: YES, or NO. # Default: YES #USE_CUPS= YES # Used by packages to compile in support for the UNIX IPP implementation, CUPS. # Possible: YES, not defined # Default: not defined USE_I586?= NO # Use assembler routines optimized for i586 in gnupg. # Possible: YES, or NO. # Default: NO #USE_INET6= # Enable IPv6 support on certain packages. It is safer to leave it undefined # in mk.conf and obey the default. Reasons: # - it is just fine to use IPv6-ready packages on top of non-IPv6 kernel # (assuming that you have IPv6-ready headers and libraries) # - it may cause some trouble to use a package compiled with USE_INET6=NO, # on top of IPv6-ready kernel # Possible: not defined, NO, YES # Default: YES on IPv6-ready userland, not defined otherwise #USE_INN= # Used in nn and trn to specify use of "inn" instead of "nntpclnt" # package to provide "inews" binary. # Possible: not defined, YES # Default: not defined USE_OPENLDAP?= NO # Enable openldap support. Used in xemacs, gnupg, dovecot, postfix, samba, # sendmail, sylpheed, pine and others. # Possible: YES, or NO. # Default: NO #USE_OSS= # # Used to enable OSS audio support in preference to or in place of Sun audio # support in various packages. # Possible: defined, not defined # Default: not defined #USE_SASL=YES # Used to specify optional support for SASL authentication # Possible: YES, not defined # Default: not defined #USE_SASL2=YES # Used to specify optional support for SASL authentication version 2.* # Possible: YES, not defined # Default: not defined USE_SJ3?= YES # Used in kinput2 to enable SJ3 kana-kanji converter support. # Possible: YES, or NO. # Default: YES #USE_SOCKS= # Used to specify SOCKS firewall support # Set this to the version of socks necessary. # Possible: 4, 5, not defined # Default: not defined USE_WNN4?= YES # Used in kinput2 to enable FreeWnn (a.k.a. Wnn4) kana-kanji # converter support. # Possible: YES, or NO. # Default: YES #USE_XFACE= # Used in xemacs package to build in support for xface # (pkgsrc/mail/face) # Possible: not defined, YES # Default: not defined USERPPP_GROUP?= network # Used in the userppp package to specify the default group. # Possible: any group name # Default: network #VIM_EXTRA_OPTS= # Used in vim package to build with non-gui extra options # Possible: not defined, see "configure --help" # Default: not defined #WDM_MANAGERS?= # Is a space-separated list of window managers for x11/wdm to support. # Possible: any space-separated list of window managers # Default: not defined WINDOWMAKER_OPTIONS?= gnome kde openlook # Options for building windowmaker package. Used to add support for # GNOME, KDE or OPEN LOOK(tm) and to avoid redundancies with KDE. # Possible: gnome, kde, openlook, lite # Default: gnome kde openlook WINDOWMAKER_THEMES?= freebsdtheme-0.52 netbsddrinkingteam-0.60.0 netbsd_-0.52 # Used in the wmthemes package to specify the themes which will be # installed. # Possible: see http://wm.themes.org/ # Default: freebsdtheme-0.52 netbsddrinkingteam-0.60.0 netbsd_-0.52 #X10_PORT= # The serial device for misc/bottlerocket to use to communicate # to the X10 adaptor. # Possible: /dev/your_favorite_serial_device # Default: defaults to ${DEFAULT_SERIAL_DEVICE} XAW_TYPE?=standard # Used in various packages to specify that libXaw is used. # Possible: standard, 3d, xpm # Default: standard XEN12_USE_COM2?= NO # This option changes Xen's serial console port to com2. # Possible: YES, NO # Default: NO #XLOCK_DEFAULT_MODE= # Set the default display (screen saver) mode for xlockmore. # Possible: ant, apollonian, ball, bat, blank, blot, bomb, bouboule, bounce, # braid, bubble, bug, clock, coral, crystal, daisy, dclock, decay, # deco, demon, dilemma, discrete, dragon, drift, euler2d, eyes, # fadeplot, flag, flame, flow, forest, galaxy, goop, grav, helix, # hop, hyper, ico, ifs, image, juggle, julia, kaleid, kumppa, laser, # life, life1d, life3d, lightning, lisa, lissie, loop, lyapunov, # mandelbrot, marquee, matrix, maze, mountain, munch, nose, pacman, # penrose, petal, petri, polyominoes, puzzle, pyro, qix, random, # roll, rotor, scooter, shape, sierpinski, slip, solitare, space, # sphere, spiral, spline, star, starfish, strange, swarm, swirl, # t3d, tetris, thornbird, tik_tak, triangle, tube, turtle, vines, # voters, wator, wire, world, worm, xcl, xjack, not defined # Default: not defined #ZIP_ENCRYPTION= # Add encryption code to zip1 # Possible: defined, not defined # Default: not defined #ZSH_STATIC= # Build statically linked zsh binary - recommended if used as a login shell # Possible: defined, not defined # Default: not defined # # Overrides for faster or cheaper sites. # # Refer to http://www.NetBSD.org/mirrors/ or /usr/doc/MIRRORS # for information on determining the location of NetBSD mirror sites. # # Australia. # #MASTER_SITE_CYGWIN= http://planetmirror.com/pub/sourceware/cygwin/ #MASTER_SITE_GNOME= http://public.planetmirror.com.au/pub/gnome/ #MASTER_SITE_GNU= http://public.planetmirror.com.au/pub/gnu/ #MASTER_SITE_MOZILLA= http://public.planetmirror.com.au/pub/mozilla/releases/ #MASTER_SITE_PERL_CPAN= ftp://mirror.aarnet.edu.au/pub/cpan/modules/by-module/ \ # http://public.planetmirror.com.au/pub/perl/cpan/modules/by-module/ #MASTER_SITE_OPENOFFICE=http://openoffice.mirrors.ilisys.com.au/ \ # http://mirror.pacific.net.au/openoffice/ \ # http://planetmirror.com/pub/openoffice/ #MASTER_SITE_SUNSITE= http://public.planetmirror.com.au/pub/sunsite/ #MASTER_SITE_SUSE= http://public.planetmirror.com.au/pub/suse/${MACHINE_ARCH}/${SUSE_VERSION}/suse/ #MASTER_SITE_TEX_CTAN= http://public.planetmirror.com.au/pub/tex-archive/ #MASTER_SITE_SOURCEFORGE=http://optusnet.dl.sourceforge.net/sourceforge/ \ # http://public.planetmirror.com.au/pub/sourceforge/ #MASTER_SITE_XCONTRIB= http://public.planetmirror.com.au/pub/X11/contrib/ #MASTER_SITE_XEMACS= ftp://ftp.au.xemacs.org/pub/xemacs/ #MASTER_SITE_BACKUP= ftp://ftp.au.NetBSD.org/pub/NetBSD/packages/distfiles/ \ # ftp://ftp.NetBSD.org/pub/NetBSD/packages/distfiles/ #MASTER_SITE_LOCAL= ftp://ftp.au.NetBSD.org/pub/NetBSD/packages/distfiles/LOCAL_PORTS/ \ # ftp://ftp.NetBSD.org/pub/NetBSD/packages/distfiles/LOCAL_PORTS/ # # Austria # #MASTER_SITE_CYGWIN= ftp://gd.tuwien.ac.at/gnu/cygwin/ #MASTER_SITE_XCONTRIB= ftp://ftp.at.NetBSD.org/hci/X11/x.org/contrib/ #MASTER_SITE_GNU= ftp://ftp.at.NetBSD.org/gnu/gnusrc/ #MASTER_SITE_PERL_CPAN= ftp://ftp.at.NetBSD.org/languages/perl/CPAN/modules/by-module/ #MASTER_SITE_OPENOFFICE=http://gd.tuwien.ac.at/office/openoffice/ #MASTER_SITE_TEX_CTAN= ftp://ftp.at.NetBSD.org/publishing/tex/CTAN/ #MASTER_SITE_SUNSITE= ftp://ftp.univie.ac.at/systems/linux/sunsite/ #MASTER_SITE_XEMACS= ftp://ftp.at.xemacs.org/editors/xemacs/ #MASTER_SITE_BACKUP= ftp://ftp.at.NetBSD.org/opsys/NetBSD/packages/distfiles/ # Denmark # #MASTER_SITE_CYGWIN= http://mirrors.sunsite.dk/cygwin/ #MASTER_SITE_GNU= ftp://ftp.sunsite.auc.dk/pub/gnu/ #MASTER_SITE_PERL_CPAN= ftp://ftp.sunsite.auc.dk/pub/languages/perl/CPAN/modules/by-module/ #MASTER_SITE_OPENOFFICE=http://mirrors.sunsite.dk/openoffice/ #MASTER_SITE_TEX_CTAN= ftp://ftp.sunsite.auc.dk/pub/tex/ctan/ #MASTER_SITE_SUNSITE= ftp://ftp.suaunsite.auc.dk/mirrors/sunsite.unc.edu/pub/Linux/ #MASTER_SITE_XEMACS= ftp://ftp.dk.xemacs.org/pub/emacs/xemacs/ #MASTER_SITE_BACKUP= ftp://ftp.dk.NetBSD.org/pub/NetBSD/packages/distfiles/ # Finland # #MASTER_SITE_CYGWIN= ftp://ftp.funet.fi/pub/mirrors/cygwin.com/pub/cygwin/ #MASTER_SITE_XCONTRIB= ftp://ftp.funet.fi/pub/X11/contrib/ #MASTER_SITE_GNU= ftp://ftp.funet.fi/pub/gnu/gnu/ #MASTER_SITE_PERL_CPAN= \ # ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module/ #MASTER_SITE_OPENOFFICE=ftp://ftp.funet.fi/pub/mirrors/openoffice.org/ #MASTER_SITE_TEX_CTAN= ftp://ftp.funet.fi/pub/TeX/CTAN/ #MASTER_SITE_SUNSITE= \ # ftp://ftp.funet.fi/pub/mirrors/sunsite.unc.edu/pub/Linux/ #MASTER_SITE_XEMACS= ftp://ftp.fi.xemacs.org/pub/mirrors/ftp.xemacs.org/pub/tux/xemacs/ #MASTER_SITE_BACKUP= \ # ftp://ftp.fi.NetBSD.org/pub/NetBSD/packages/distfiles/ # France # #MASTER_SITE_CYGWIN= http://mir.zyrianes.net/cygwin/ #MASTER_SITE_OPENOFFICE=ftp://openoffice.cict.fr/openoffice/ \ # http://ftp.club-internet.fr/pub/OpenOffice/ #MASTER_SITE_SUSE= \ # ftp://fr.rpmfind.net/linux/SuSE-Linux/${MACHINE_ARCH}/update/${SUSE_VERSION}/ \ # ftp://fr2.rpmfind.net/linux/SuSE-Linux/${MACHINE_ARCH}/update/${SUSE_VERSION}/ # Greece # #MASTER_SITE_CYGWIN= http://ftp.ntua.gr/pub/pc/cygwin/ #MASTER_SITE_OPENOFFICE=http://www.ellak.gr/pub/openoffice/ \ # http://ftp.ntua.gr/pub/OpenOffice/ #MASTER_SITE_SUSE= \ # ftp://ftp.duth.gr/pub/suse/${MACHINE_ARCH}/${SUSE_VERSION}/suse/ # Japan # #MASTER_SITE_CYGWIN= ftp://ftp.t.ring.gr.jp/archives/pc/gnu-win32/ #MASTER_SITE_GNOME= ftp://ftp.t.ring.gr.jp/pub/X/gnome/ #MASTER_SITE_GNU= ftp://ftp.t.ring.gr.jp/pub/GNU/ #MASTER_SITE_MOZILLA= ftp://ftp.t.ring.gr.jp/pub/net/www/mozilla/mozilla/releases/ #MASTER_SITE_PERL_CPAN= ftp://ftp.t.ring.gr.jp/pub/lang/perl/CPAN/modules/by-module/ #MASTER_SITE_OPENOFFICE=ftp://ftp.kddlabs.co.jp/office/openoffice/ \ # ftp://ftp.t.ring.gr.jp/pub/misc/openoffice/ #MASTER_SITE_TEX_CTAN= ftp://ftp.t.ring.gr.jp/pub/text/CTAN/ #MASTER_SITE_SUSE= \ # ftp://ftp.kddlabs.co.jp/Linux/packages/SuSE/suse/${MACHINE_ARCH}/${SUSE_VERSION}/suse/ #MASTER_SITE_SUNSITE= ftp://sunsite.sut.ac.jp/pub/archives/linux/sunsite-unc/ #MASTER_SITE_XCONTRIB= ftp://ftp.t.ring.gr.jp/pub/X/opengroup/contrib/ #MASTER_SITE_XEMACS= ftp://ftp.jp.xemacs.org/pub/GNU/xemacs/ #MASTER_SITE_BACKUP= \ # ftp://ftp.t.ring.gr.jp/pub/NetBSD/packages/distfiles/ \ # ftp://ftp.jp.NetBSD.org/pub/NetBSD/packages/distfiles/ # Switzerland # #MASTER_SITE_CYGWIN= ftp://mirror.switch.ch/mirror/cygwin/ #MASTER_SITE_OPENOFFICE=ftp://mirror.switch.ch/mirror/OpenOffice/ #MASTER_SITE_SUSE= \ # ftp://sunsite.cnlab-switch.ch/mirror/SuSE/suse/${MACHINE_ARCH}/${SUSE_VERSION}/suse/ # United Kingdom # #MASTER_SITE_CYGWIN= ftp://ftp.mirror.ac.uk/sites/sources.redhat.com/ftp/cygwin/ #MASTER_SITE_GNU= ftp://sunsite.org.uk/packages/gnu/ #MASTER_SITE_PERL_CPAN= ftp://sunsite.org.uk/packages/perl/CPAN/modules/by-module/ #MASTER_SITE_OPENOFFICE=ftp://ftp.mirror.ac.uk/sites/ny1.mirror.openoffice.org/ #MASTER_SITE_TEX_CTAN= ftp://sunsite.org.uk/packages/tex/uk-tex/ #MASTER_SITE_SUSE= \ # ftp://ftp.mirror.ac.uk/sites/ftp.suse.com/pub/suse/${MACHINE_ARCH}/${SUSE_VERSION}/suse/ #MASTER_SITE_SUNSITE= ftp://sunsite.org.uk/Mirrors/sunsite.unc.edu/pub/Linux/ #MASTER_SITE_XCONTRIB= ftp://sunsite.org.uk/Mirrors/ftp.x.org/contrib/ #MASTER_SITE_XEMACS= ftp://ftp.uk.xemacs.org/sites/ftp.xemacs.org/pub/xemacs/ #MASTER_SITE_BACKUP= \ # ftp://sunsite.org.uk/packages/NetBSD/packages/distfiles/ \ # ftp://ftp.NetBSD.org/pub/NetBSD/packages/distfiles/ # USA # #MASTER_SITE_OPENOFFICE=http://openoffice.behrsolutions.com/ \ # http://www.ibiblio.org/pub/mirrors/openoffice/ \ # ftp://ftp.ussg.iu.edu/pub/openoffice/ \ # http://mirrors.isc.org/pub/openoffice/ \ # ftp://mirror.telentente.com/pub/OpenOffice/ \ # http://openoffice.mirrors.pair.com/ #MASTER_SITE_SUSE= \ # ftp://mirror.mcs.anl.gov/pub/ftp.suse.com/${MACHINE_ARCH}/${SUSE_VERSION}/suse/ # France. This will try to fetch distfile from the distfile mirror # before trying ${MASTER_SITE} or the distfiles at ftp.NetBSD.org # #MASTER_SITE_OVERRIDE= \ # ftp://ftp2.fr.NetBSD.org/pub/NetBSD/packages/distfiles/ #MASTER_SITE_BACKUP= \ # ftp://ftp2.fr.NetBSD.org/pub/NetBSD/packages/distfiles/ #MASTER_SITE_LOCAL= \ # ftp://ftp.fr.NetBSD.org/pub/NetBSD/packages/distfiles/LOCAL_PORTS/