# 6to4.conf
#

$out_if="ppp0";			# Our outgoing (uplink) interface
$in_if="";			# Inside (ethernet) interface

$v6_net="1";			# 2002:x:x:v6_net::
$v6_innernet="2";		# 2002:x:x:v6_innernet::
$v6_prefixlen=16;		# Change for more
$hostbits6=":1";		# should be determined via MAC of $in_if

###########################################################################
#
# Selection of 6to4 relay router. If "peer" is not set,
# "remoteadr4" and "remoteadr6" must be set!
#

# Some possible remote 6to4 routers; DNS lookups will be used
# to determine their IPv4 and IPv6 adresses (see below on how
# to avoid these lookups):
$peer="6to4.ipv6.fh-regensburg.de"; # Germany, Europe
#$peer="asterix.ipv6.bt.com";	     # Great Britain, Europe
#$peer="6to4.kfu.com";		     # USA, West coast
#$peer="6to4.ipv6.microsoft.com";    # USA, West coast
#$peer="ipv6-router.cisco.com";      # USA, West coast; register at http://www.cisco.com/ipv6/
#$peer="6to4-anycast"; 		     # RFC 3068 magic value


# To prevent DNS lookups of peer, directly specify IPv4 and IPv6 address
# of 6to4 relay router:

# 6to4.ipv6.fh-regensburg.de - Germany, Europe:
#$remoteadr4="194.95.108.191";
#$remoteadr6="2002:c25f:6cbf:1::1";