# $NetBSD: Makefile.common,v 1.16 2001/06/11 02:05:14 jlam Exp $

DISTNAME=		ghostscript-${GS_VERS}
GS_VERS=		6.01
CATEGORIES=		print
MASTER_SITES+=		http://download.sourceforge.net/ghostscript/ \
			ftp://ftp.cs.wisc.edu/ghost/aladdin/gs601/
EXTRACT_SUFX=		.tar.bz2

MAINTAINER=		jlam@netbsd.org
HOMEPAGE=		http://www.cs.wisc.edu/~ghost/index.html

DEPENDS+=		ghostscript-fonts-6.0:../../fonts/ghostscript-fonts
DEPENDS+=		watanabe-vfont-19930318:../../fonts/watanabe_vfont

GS_SOURCES=		${DISTNAME}${EXTRACT_SUFX}
DISTFILES+=		${GS_SOURCES}

# Adobe's JPEG implementation in their PDF/PS documents is non-standard,
# so we can't use an already installed libjpeg.so.
#
MASTER_SITES+=		ftp://ftp.uu.net/graphics/jpeg/
JPEG_SOURCES=		jpegsrc.v6b.tar.gz
DISTFILES+=		${JPEG_SOURCES}
EXTRACT_LIST+=		${JPEG_SOURCES}

# VFlib & Japanese PDF patch
PATCH_SITES=		http://www.sat.t.u-tokyo.ac.jp/~hideyuki/Ghostscript/
PATCHFILES=		gs${GS_VERS}-jpdf-exp.patch.gz
PATCH_DIST_STRIP=	-p1

# PostScript source to decode encrypted PDF files
MASTER_SITES+=		http://www.ozemail.com.au/~geoffk/pdfencrypt/
PDF_SEC=		pdf_sec.ps
DISTFILES+=		${PDF_SEC}

# Additional driver for several HP deskjets
MASTER_SITES+=		ftp://ftp.sbs.de/pub/graphics/ghostscript/pcl3/
HPDJ_DRV=		hpdj-2.6
DISTFILES+=		${HPDJ_DRV}.tar.gz
EXTRACT_LIST+=		${HPDJ_DRV}.tar.gz

# I don't know the primary destribution sites of these drivers....
MASTER_SITES+=		ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/
DMPRT_DRV=		dmprt-2.01
DISTFILES+=		${DMPRT_DRV}.tar.gz
EXTRACT_LIST+=		${DMPRT_DRV}.tar.gz

BJ10V_DRV=		gdev10v
DISTFILES+=		${BJ10V_DRV}.tar.gz
EXTRACT_LIST+=		${BJ10V_DRV}.tar.gz

# EPSON MJ-700V2C
MJC_DRV=		gdevmjc-0.8
DISTFILES+=		${MJC_DRV}.tar.gz
EXTRACT_LIST+=		${MJC_DRV}.tar.gz

# Alps MD5000 printer 600dpi monochrome mode
MD5000_DRV=		gdevalps-0.2
DISTFILES+=		${MD5000_DRV}.tar.gz
EXTRACT_LIST+=		${MD5000_DRV}.tar.gz

# Alps MD-2000/2010/4000/1300/1500/5000
MASTER_SITES+=		http://plaza26.mbn.or.jp/~higamasa/gdevmd2k/
MD2000_DRV=		gdevmd2k-0.2a
DISTFILES+=		${MD2000_DRV}.tar.gz
EXTRACT_LIST+=		${MD2000_DRV}.tar.gz

# Canon LIPS II+, III, IV; EPSON ESC/Page; NEC NPDL drivers
MASTER_SITES+=		http://www.bukka.p.chiba-u.ac.jp/~ohmori/gs/
LIPS_DRV=		gdevlips-2.3.6
DISTFILES+=		${LIPS_DRV}.tar.gz
EXTRACT_LIST+=		${LIPS_DRV}.tar.gz

# Ricoh RPDL
MASTER_SITES+=		http://home.jp.FreeBSD.org/~mita/LOCAL_PORTS/
RPDL_DRV=		gdevrpdl
DISTFILES+=		${RPDL_DRV}.tar.gz
EXTRACT_LIST+=		${RPDL_DRV}.tar.gz

# Kyocera Prescribe
MASTER_SITES+=		${MASTER_SITE_LOCAL}
PRESCR_DRV=		gdevprsc-0.2.1
DISTFILES+=		${PRESCR_DRV}.tar.gz
EXTRACT_LIST+=		${PRESCR_DRV}.tar.gz

DISTINFO_FILE=		${.CURDIR}/../../print/ghostscript-nox11/distinfo
FILESDIR=		${.CURDIR}/../../print/ghostscript-nox11/files
PATCHDIR=		${.CURDIR}/../../print/ghostscript-nox11/patches
SCRIPTDIR=		${.CURDIR}/../../print/ghostscript-nox11/scripts
PLIST_SRC=		${.CURDIR}/../../print/ghostscript-nox11/pkg/PLIST

EXTRACT_ONLY=		${GS_SOURCES}
DIST_SUBDIR=		ghostscript
WRKSRC=			${WRKDIR}/gs${GS_VERS}
MAKEFILE=		src/unix-gcc.mak
ALL_TARGET=		std

.include "../../mk/bsd.prefs.mk"
.include "../../graphics/png/buildlink.mk"
.include "../../japanese/vflib-lib/buildlink.mk"

# arm32 compiler has an optimizer problem
.if ${OPSYS} == "NetBSD" && ${MACHINE_ARCH} == "arm32"
CFLAGS=
.endif

.if defined(PAPERSIZE) && (${PAPERSIZE} == "A4" || ${PAPERSIZE} == "a4")
CFLAGS+=		-DA4
.endif

CFLAGS+=		-DHAVE_MKSTEMP=1

.if ${OPSYS} == "SunOS"
LDFLAGS+=		-L${LOCALBASE}/bsd/lib -Wl,-R${LOCALBASE}/bsd/lib
.endif

MAKE_ENV+=		XLDFLAGS="${LDFLAGS}"

# Ghostscript builds in ./obj, which confuses make, so explicitly set
# MAKEOBJDIR so as not to descend into ./obj.
#
MAKE_ENV+=		MAKEOBJDIR="."

# Define whether this platform has floating point hardware:
#	FPU_TYPE=2 means floating point is faster than fixed point.
# (This is the case on some RISCs with multiple instruction dispatch.)
#	FPU_TYPE=1 means floating point is at worst only slightly slower
# than fixed point.
#	FPU_TYPE=0 means that floating point may be considerably slower.
#	FPU_TYPE=-1 means that floating point is always much slower than
# fixed point.
#
FPU_TYPE?=		1
MAKE_ENV+=		FPU_TYPE=${FPU_TYPE}

.if defined(USE_X11)
MAKEFRAGS=		${FILESDIR}/devs.x11
.endif
MAKEFRAGS+=		${FILESDIR}/devs.nox11

GSINST_DIR=		${PREFIX}/share/ghostscript/${GS_VERS}vflib
DOC_DIR=		${PREFIX}/share/doc/ghostscript
HTML_DIR=		${PREFIX}/share/doc/html/ghostscript
LIB_DIR=		${GSINST_DIR}/lib

post-extract:
.for FILE in ${EXTRACT_LIST}
	cd ${WRKDIR}; ${PAX} -zrf ${_DISTDIR}/${FILE}
.endfor
	cd ${WRKSRC}/src; ${PAX} -rf ${WRKDIR}/${HPDJ_DRV}/hpdj.tar
	${MV} ${WRKSRC}/src/gs-hpdj.1 ${WRKSRC}/man
	cd ${WRKDIR}; ${CP} gdevdmpr.c gdevdmpr.mak		${WRKSRC}/src
	cd ${WRKDIR}; ${CP} dviprlib.*				${WRKSRC}/src
	cd ${WRKDIR}/${BJ10V_DRV}; ${CP} gdev10v.c gdev10v.mak	${WRKSRC}/src
	cd ${WRKDIR}/${MJC_DRV}; ${CP} *.[ch] gdevmjc.mak	${WRKSRC}/src
	cd ${WRKDIR}/${LIPS_DRV}; ${CP} *			${WRKSRC}/src
	cd ${WRKDIR}/${RPDL_DRV}; ${CP} gdevrpdl.c gdevrpdl.mak	${WRKSRC}/src
	cd ${WRKDIR}/${MD5000_DRV}; \
		${CP} gdevalps.c gdevalps.mak-5.50		${WRKSRC}/src
	cd ${WRKDIR}/${MD2000_DRV}; \
		${CP} gdevmd2k.c gdevmd2k.mak-5.8x		${WRKSRC}/src
	cd ${WRKDIR}/${PRESCR_DRV}; \
		${CP} gdevprsc.c gdevprsc.mak			${WRKSRC}/src

	${RM} -f ${WRKSRC}/jpeg
	${LN} -sf ${WRKDIR}/jpeg-6b ${WRKSRC}/jpeg
	${RM} -f ${WRKSRC}/lib/${PDF_SEC}
	${LN} -s ${_DISTDIR}/${PDF_SEC} ${WRKSRC}/lib/${PDF_SEC}
	${MV} ${WRKSRC}/lib/fixmswrd.pl ${WRKSRC}/lib/fixmswrd.pl.in

post-patch:
	if [ ! -f ${WRKDIR}/dmp_site.ps.bak ]; then			\
		${MV} ${WRKDIR}/dmp_site.ps ${WRKDIR}/dmp_site.ps.bak;	\
	fi
	${SED} -e "s|epsimage\.src|${GSINST_DIR}/lib/escp_24.src|g"	\
		${WRKDIR}/dmp_site.ps.bak > ${WRKDIR}/dmp_site.ps

do-configure:
	#
	# Append build rules for extra drivers to contrib.mak
	#
	${CAT}	${WRKSRC}/src/contrib.mak-5.94.add			\
		${WRKSRC}/src/gdevlips.mak				\
		${WRKSRC}/src/gdev10v.mak				\
		${WRKSRC}/src/gdevmjc.mak				\
		${WRKSRC}/src/gdevrpdl.mak				\
		${WRKSRC}/src/gdevdmpr.mak				\
		${WRKSRC}/src/gdevalps.mak-5.50				\
		${WRKSRC}/src/gdevmd2k.mak-5.8x				\
		${WRKSRC}/src/gdevprsc.mak				\
		>> ${WRKSRC}/src/contrib.mak
	#
	# Prepend device list to unix-gcc.mak
	#
	${CAT}	${MAKEFRAGS}						\
		${WRKSRC}/src/unix-gcc.mak				\
		> ${WRKDIR}/unix-gcc.mak
	${MV} -f ${WRKDIR}/unix-gcc.mak ${WRKSRC}/src

	${SED}	-e "s|@PERL@|${PERL5}|g"				\
		${WRKSRC}/lib/fixmswrd.pl.in > ${WRKSRC}/lib/fixmswrd.pl

post-install:
	strip ${PREFIX}/bin/gs
	${INSTALL_DATA_DIR} ${DOC_DIR}
	${INSTALL_DATA} ${WRKDIR}/${LIPS_DRV}/Gdevlips.htm ${HTML_DIR}
	${INSTALL_DATA} ${WRKDIR}/${BJ10V_DRV}/gdev10v.jis ${DOC_DIR}
	${INSTALL_DATA} ${WRKDIR}/gdevdmpr.sj ${DOC_DIR}
	${INSTALL_DATA} ${WRKDIR}/dmp_init.ps ${LIB_DIR}
	${INSTALL_DATA} ${WRKDIR}/dmp_site.ps ${LIB_DIR}
	${INSTALL_DATA} ${WRKDIR}/escp_24.src ${LIB_DIR}
	${INSTALL_DATA} ${WRKDIR}/testpage.ps ${LIB_DIR}
	${INSTALL_DATA} ${WRKDIR}/${PRESCR_DRV}/gdevprsc.?? ${DOC_DIR}
	${INSTALL_DATA_DIR} ${DOC_DIR}/${MJC_DRV}
	${INSTALL_DATA} ${WRKDIR}/${MJC_DRV}/README.mjc ${DOC_DIR}/${MJC_DRV}
	${INSTALL_DATA} ${WRKDIR}/${MJC_DRV}/README.noz ${DOC_DIR}/${MJC_DRV}
	${INSTALL_DATA} ${WRKDIR}/${MJC_DRV}/README.mje ${DOC_DIR}/${MJC_DRV}
	${INSTALL_DATA} ${WRKDIR}/${MJC_DRV}/cpem.doc ${DOC_DIR}/${MJC_DRV}
	${INSTALL_DATA} ${WRKDIR}/${MJC_DRV}/MJ700V2C.FAQ ${DOC_DIR}/${MJC_DRV}

.include "../../mk/bsd.pkg.mk"