path: root/sysutils/mklivecd/files/mklivecd.sh

#!/bin/sh
#
# $NetBSD: mklivecd.sh,v 1.19.2.1 2005/03/31 15:10:31 salo Exp $
#
# Copyright (c) 2004, 2005 The NetBSD Foundation, Inc.
# All rights reserved.
#
# This code is derived from software contributed to The NetBSD Foundation
# by Juan RP.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
# 3. All advertising materials mentioning features or use of this software
#    must display the following acknowledgement:
#        This product includes software developed by the NetBSD
#        Foundation, Inc. and its contributors.
# 4. Neither the name of The NetBSD Foundation nor the names of its
#    contributors may be used to endorse or promote products derived
#    from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# ====================================================================== #
#  mklivecd - Build a NetBSD LiveCD! for i386 machines.			 #
# ====================================================================== #

: ${progname:=$(basename $0)}
: ${config_dir:=$HOME/.mklivecd}
: ${pers_conffile:=personal_config}
: ${tmp_file:=/tmp/${progname}.$$}
: ${pkgsrc_mntstat:=$config_dir/pkgsrc_mount.stat}
: ${pkgsrcdist_mntstat:=$config_dir/pkgsrcdist_mount.stat}
: ${MKISOFS:=@LOCALBASE@/bin/mkisofs}
: ${CDRECORD:=@LOCALBASE@/bin/cdrecord}
#
# Don't modify the next ones! they are needed for booting grub.
#
: ${MKISOFS_FIXED_ARGS:=-no-emul-boot -boot-load-size 30 -boot-info-table}
: ${BOOTDIR:=boot/grub}
: ${BOOTIMAGE:=stage2_eltorito}
: ${GRUB_FILES:=stage1 stage2 stage2_eltorito iso9660_stage1_5 xfs_stage1_5 ufs2_stage1_5 reiserfs_stage1_5 jfs_stage1_5 ffs_stage1_5 fat_stage1_5 e2fs_stage1_5}

trap "echo; showmsg \"Process cancelled!\"; bye 127" INT QUIT

# ====================================================================== #
#  My functions :-)							 #
# ====================================================================== #

usage()
{
	cat <<_usage_

	${progname}: [-v] [-c config_file] [target]

	Target operations:

	kernel	    Build and install the Boot kernel image
	iso	    Build the ISO 9660 image
	burn	    Burn the ISO image via cdrecord
	base	    Install the base/x11 sets into ISODIR
	chroot	    chroot into the livecd
	clean	    Clean the work directory
	config	    Create the default configuration file

_usage_

	exit 1
}

showmsg()
{
	echo "===> $@"
}

bye()
{
	_exitarg="$1"
	rm -f $tmp_file; exit $_exitarg
}

do_conf()
{
	BASE_VARS="SOURCEDIR PKGSRCDIR PKGSRCDISTDIR SHAREDIR BASEDIR WORKDIR \
		   ISODIR BASE_SETS_DIR X11_SETS_DIR BASE_SETS X11_SETS \
		   CHROOT_SHELL"

	MISC_VARS="ENABLE_X11 MKISOFS_ARGS CDRECORD_ARGS BLANK_BEFORE_BURN \
		   CDROM_DEVICE PERSONAL_CONFIG BOOTKERN KERNEL_NAME \
		   IMAGE_NAME PKG_SYSCONFDIR REMOVE_DIRS"

	MNT_VARS="MNT_DEV_ARGS MNT_ETC_ARGS MNT_VAR_ARGS \
		  MNT_ROOT_ARGS MNT_TMP_ARGS MNT_HOME_ARGS \
		  MNT_PKG_SYSCONFDIR_ARGS"

	# Base directories/sets
        : ${SOURCEDIR:=/usr/src}
	: ${PKGSRCDIR:=/usr/pkgsrc}
	: ${PKGSRCDISTDIR:=/usr/pkgsrc/distfiles}
	: ${SHAREDIR:=@PREFIX@/share/mklivecd}
	: ${BASEDIR:=$HOME/livecd}
	: ${WORKDIR:=${BASEDIR}/work}
	: ${ISODIR:=${BASEDIR}/iso}
	: ${BASE_SETS_DIR:=$HOME/release/binary/sets}
	: ${X11_SETS_DIR:=${BASE_SETS_DIR}}
	: ${BASE_SETS:=etc.tgz base.tgz comp.tgz text.tgz}
	: ${X11_SETS:=xbase.tgz xcomp.tgz xfont.tgz xserver.tgz}
	: ${CHROOT_SHELL:=/bin/ksh}

	# Miscellaneous options
	: ${ENABLE_X11:=no}
	: ${MKISOFS_ARGS:=-J -R -nobak -v}
	: ${CDRECORD_ARGS:=-v}
	: ${BLANK_BEFORE_BURN:=no}
	: ${CDROM_DEVICE:=15,1,0}
	: ${PERSONAL_CONFIG:=no}
	: ${BOOTKERN:=KERN-LIVECD}
	: ${KERNEL_NAME:=MKLIVECD}
	: ${IMAGE_NAME:=NetBSD-LiveCD}
	: ${PKG_SYSCONFDIR:=usr/pkg/etc}
	: ${REMOVE_DIRS:=altroot usr/share/info}
	
	# Mount arguments
	: ${MNT_DEV_ARGS:=-o noatime -s 5m}
	: ${MNT_ETC_ARGS:=-o noatime -s 2m}
	: ${MNT_VAR_ARGS:=-o noatime -s 10m}
	: ${MNT_ROOT_ARGS:=-o noatime -s 5m}
	: ${MNT_TMP_ARGS:=-o noatime -s 10m}
	: ${MNT_HOME_ARGS:=-o noatime -s 50m}
	: ${MNT_PKG_SYSCONFDIR_ARGS:=-o noatime -s 1m}

	if [ ! -d $config_dir ]; then
		mkdir $config_dir
	fi

	if [ ! -f $config_dir/$pers_conffile ]; then
		cp $SHAREDIR/$pers_conffile $config_dir
	fi

	if [ ! -f $config_file ]; then
		cat >> $config_file <<EOF
# --*-sh-*--    
#               
# mklivecd - configuration file
# See mklivecd(8) for a detailed description of each variable.
#
# Generated automatically on $(date).

EOF
		echo "# Base directories/options" >> $config_file
		for var in $(echo $BASE_VARS | tr ' ' '\n')
		do
		    eval val=\""\$$var"\"
		    echo "$var=\"$val\"" >> $config_file
		done
		echo >> $config_file

		echo "# Miscellaneous options" >> $config_file
		for var in $(echo $MISC_VARS | tr ' ' '\n')
		do
		    eval val=\""\$$var"\"
		    echo "$var=\"$val\"" >> $config_file
		done
		echo >> $config_file

		echo "# Mount arguments" >> $config_file
		for var in $(echo $MNT_VARS | tr ' ' '\n')
		do
		    eval val=\""\$$var"\"
		    echo "$var=\"$val\"" >> $config_file
		done
		echo >> $config_file

		echo "=> Configuration file created, now please edit it."
		echo "=> Path: $config_file"
	elif [ -f $config_file -a $target != "config" ]; then
		if [ "$verbose_mode" = "on" ]; then
		    showmsg "Using $config_file"
		fi
	else
		showmsg "$config_file already exists!"
		bye 1
	fi
}

do_conf_reset()
{
	for F in ${BASE_VARS} ${MISC_VARS} ${MNT_VARS}
	do
		eval $F=\"\"
	done
}

do_cdlive()
{
	. $config_file

	vars="$BASEDIR $ISODIR $WORKDIR"

	for value in $vars
	do
		if [ ! -d $value ]; then
			mkdir -p $value
		fi
	done

	case "$1" in
	kernel)
		if [ ! -d $SOURCEDIR/sys ]; then
		    showmsg "Can't find NetBSD sources, exiting!"
		    bye 1
		fi

		showmsg "Building boot image on $(date)"
		echo
		showmsg "Using the following values:"
		showmsg "   SHAREDIR=$SHAREDIR"
		showmsg "   WORKDIR=$WORKDIR"
		showmsg "   ISODIR=$ISODIR"
		showmsg "   BASEDIR=$BASEDIR"
		showmsg "Using kernel: $BOOTKERN"
		showmsg "Kernel name: $KERNEL_NAME"
		echo
		sleep 2
		# if there's a kernel in ~/.mklivecd, use it, otherwise
		# use the default one located in SHAREDIR.
		if [ -s $config_dir/$BOOTKERN ]; then
		    cp $config_dir/$BOOTKERN $WORKDIR
		else
		    cp $SHAREDIR/$BOOTKERN $WORKDIR
		fi

		cd $WORKDIR
		[ ! -d $WORKDIR/$KERNEL_NAME ] && mkdir $WORKDIR/$KERNEL_NAME
		config -s $SOURCEDIR/sys -b $WORKDIR/$KERNEL_NAME \
		    $BOOTKERN
		cd $KERNEL_NAME
		make depend
		make COPTS="-Os"	    # Don't use additional flags
		if [ $? -eq 0 ]; then
		    [ ! -d $ISODIR/$BOOTDIR ] && mkdir -p $ISODIR/$BOOTDIR
		    for f in $GRUB_FILES
		    do
			    if [ ! -f $ISODIR/$BOOTDIR/$f ]; then
				cp @PREFIX@/lib/grub/@MACHINE_ARCH@-/$f \
				    $ISODIR/$BOOTDIR
				[ "$verbose_mode" = "on" ] && \
				    showmsg "Copying $f into $ISODIR/$BOOTDIR."
			    else
				showmsg "Not copying $f, already exists."
			    fi
		    done
		    cp $WORKDIR/$KERNEL_NAME/netbsd $ISODIR/$BOOTDIR/$BOOTKERN
		    [ "$verbose_mode" = "on" ] && \
		    	showmsg "Compressing kernel $BOOTKERN..."
		    
		    gzip $ISODIR/$BOOTDIR/$BOOTKERN
		    
		    [ "$verbose_mode" = "on" ] && \
		    	showmsg "Creating $ISODIR/$BOOTDIR/menu.lst..."

		    if [ ! -f $ISODIR/$BOOTDIR/menu.lst ]; then
		    	cat > $ISODIR/$BOOTDIR/menu.lst << _EOF_
# Default GRUB menu file created by ${progname}.
# Date: $(date).

default 0
timeout 10

title NetBSD/$BOOTKERN kernel
kernel --type=netbsd /$BOOTDIR/$BOOTKERN.gz

_EOF_
		    fi

		    if [ $? -eq 0 ]; then
			    showmsg "Boot/kernel files installed!"
			showmsg "Next step: ${progname} base"
			make clean >/dev/null 2>&1
			rm -rf $KERNEL_NAME
		    else
			showmsg "Couldn't install the kernel."
		    fi
		else
		    echo
		    showmsg "kernel build failed."
		    showmsg "Boot/kernel files were not installed!"
		fi
	;;
	base)
		for F in ${BASE_SETS}
		do
		    if [ ! -f $BASE_SETS_DIR/$F ]; then
			showmsg "Target base failed!"
			showmsg "Can't find $F, exiting."
			bye 1
		    fi
		done

		showmsg "Installing base sets"
		for S in ${BASE_SETS}
		do
		    if [ -f $BASE_SETS_DIR/$S ]; then
			if [ "$verbose_mode" = "on" ]; then
			    echo "=> Unpacking $S"
			fi
			@TAR@ xfzp $BASE_SETS_DIR/$S -C $ISODIR
		    fi
		done

		if [ "${ENABLE_X11}" = "yes" ]; then
		    for FX in ${X11_SETS}
		    do
			if [ ! -f $X11_SETS_DIR/$FX ]; then
			    showmsg "Can't find $FX, disabling X11."
			    DISABLE_X11=yes
			    break
			fi
		    done

		    if [ "$DISABLE_X11" = "" ]; then
			showmsg "Installing X11 sets"
			for X in ${X11_SETS}
			do
			    if [ -f $X11_SETS_DIR/$X ]; then
				if [ "$verbose_mode" = "on" ]; then
				    echo "=> Unpacking $X"
				fi
				@TAR@ xfzp $X11_SETS_DIR/$X -C $ISODIR
			    fi
			done
		    fi
		fi # ENABLE_X11
			
		cp $SHAREDIR/mfs_rcd $ISODIR/etc/rc.d

		# /etc/rc.conf
		showmsg "Installing configuration files"
		sed -e "s,rc_configured=NO,rc_configured=YES,g" \
			$ISODIR/etc/rc.conf > $ISODIR/etc/rc.conf.fixed
		mv $ISODIR/etc/rc.conf.fixed $ISODIR/etc/rc.conf
		touch $ISODIR/etc/fstab

		(						    \
		echo "mfsrc=yes";				    \
		echo "dhclient=yes dhclient_flags=-q";		    \
		echo "wscons=yes";				    \
		echo "hostname=$KERNEL_NAME";			    \
		echo "nfs_client=yes";				    \
		echo "inetd=no";				    \
		echo "ntpdate=yes";				    \
		echo "savecore=no";				    \
		) >> $ISODIR/etc/rc.conf

		# /etc/rc.d/root could umount the mfs directories, 
		# so it's best not to touch them.

		rm $ISODIR/etc/rc.d/root
		cat > $ISODIR/etc/rc.d/root <<_EOF_
#!/bin/sh
#
# \$NetBSD: mklivecd.sh,v 1.19.2.1 2005/03/31 15:10:31 salo Exp $
# 

# PROVIDE: root
# REQUIRE: fsck

. /etc/rc.subr

name="root"
start_cmd="root_start"
stop_cmd=":"

root_start()
{
        rm -f /fastboot
}

load_rc_config \$name
run_rc_command "\$1"
_EOF_
		# Make sure the devices are created before creating
		# the .tgz files.

		showmsg "Creating devices"
		cd $ISODIR/dev && ./MAKEDEV all
		echo
		showmsg "Target base successful"
		if [ "$verbose_mode" = "on" ]; then
		    showmsg "Base system installed"
		    showmsg "Next step: ${progname} chroot"
		fi
	;;
	chroot)
		if [ ! -f $ISODIR/etc/profile ]; then 
			(					\
			echo "export PS1=\"$KERNEL_NAME> \"";	\
			echo "set -o emacs";			\
			) > $ISODIR/etc/profile
		else
			if [ "$verbose_mode" = "on" ]; then
				showmsg "Not overwriting /etc/profile."
			fi
		fi

		if [ ! -d $ISODIR/usr/pkgsrc/distfiles ]; then
		    mkdir -p $ISODIR/usr/pkgsrc/distfiles
		fi

		if [ ! -f $ISODIR/usr/share/misc/termcap ]; then
		    cp /usr/share/misc/termcap*		\
			$ISODIR/usr/share/misc
		fi

		showmsg "Entering into the chroot!"

		if [ -d $PKGSRCDIR ]; then
		    if [ -f $pkgsrc_mntstat ]; then
			count=$(cat $pkgsrc_mntstat)
			count=$(($count + 1))
			echo $count > $pkgsrc_mntstat
			showmsg "pkgsrc directory already mounted."
		    else
			showmsg "pkgsrc directory ready."
			echo "1" > $pkgsrc_mntstat
			mount_null $PKGSRCDIR $ISODIR/usr/pkgsrc
		    fi
		else
		    showmsg "Can't find $PKGSRCDIR, disabling it."
		fi
		
		if [ -d $PKGSRCDISTDIR ]; then
			if [ -f $pkgsrcdist_mntstat ]; then
				count=$(cat $pkgsrcdist_mntstat)
				count=$(($count +1))
				echo $count > $pkgsrcdist_mntstat
				showmsg "distfiles directory already mounted."
			else
				showmsg "distfiles directory ready."
				echo "1" > $pkgsrcdist_mntstat
				mount_null $PKGSRCDISTDIR $ISODIR/usr/pkgsrc/distfiles
			fi
		else
			showmsg "Can't find $PKGSRCDISTDIR, disabling it."
		fi

		echo
		chroot $ISODIR $CHROOT_SHELL
		echo

		if [ ! -d $ISODIR/root ]; then
		    showmsg "Target chroot failed!"
		    showmsg "Can't find root directory, exiting."
		    bye 1
		fi

		cd $ISODIR
		cp -f $SHAREDIR/mfs_rcd $ISODIR/etc/rc.d

		SUBST_H="mount_mfs $MNT_HOME_ARGS swap /home"
		SUBST_HT="@TAR@ xfzp /stand/mfs_home.tgz -C /"
		SUBST_S="mount_mfs $MNT_PKG_SYSCONFDIR_ARGS swap /$PKG_SYSCONFDIR"
		SUBST_ST="@TAR@ xfzp /stand/mfs_pkg_sysconfdir.tgz -C /"

		sed -e "s,@MNT_DEV_ARGS@,$MNT_DEV_ARGS,g" \
		    -e "s,@MNT_ETC_ARGS@,$MNT_ETC_ARGS,g" \
		    -e "s,@MNT_VAR_ARGS@,$MNT_VAR_ARGS,g" \
		    -e "s,@MNT_ROOT_ARGS@,$MNT_ROOT_ARGS,g" \
		    -e "s,@MNT_TMP_ARGS@,$MNT_TMP_ARGS,g" \
		    $ISODIR/etc/rc.d/mfs_rcd > $ISODIR/etc/rc.d/mfs_rcd.in
		mv $ISODIR/etc/rc.d/mfs_rcd.in $ISODIR/etc/rc.d/mfs_rcd
		
		for U in root var dev etc home
		do
		    if [ -d $ISODIR/$U ]; then
			@TAR@ cfzp $ISODIR/stand/mfs_$U.tgz $U >/dev/null 2>&1
			showmsg "Creating /stand/mfs_$U.tgz"
		    fi
		done
 
		if [ -d $ISODIR/home ]; then
		    sed -e "s,@HOME@,$SUBST_H," \
			-e "s,@HOMETAR@,$SUBST_HT," \
			$ISODIR/etc/rc.d/mfs_rcd > $ISODIR/etc/rc.d/mfs_rcd.f
			mv $ISODIR/etc/rc.d/mfs_rcd.f $ISODIR/etc/rc.d/mfs_rcd
		else
		    sed -e "s,@HOME@,," -e "s,@HOMETAR@,," \
			$ISODIR/etc/rc.d/mfs_rcd > $ISODIR/etc/rc.d/mfs_rcd.f
		    mv $ISODIR/etc/rc.d/mfs_rcd.f $ISODIR/etc/rc.d/mfs_rcd
		fi
                        
		if [ -d $ISODIR/$PKG_SYSCONFDIR ]; then
		    @TAR@ cfzp $ISODIR/stand/mfs_pkg_sysconfdir.tgz \
			$PKG_SYSCONFDIR >/dev/null 2>&1
		    showmsg "Creating /stand/mfs_pkg_sysconfdir.tgz"
		    sed -e "s,@USRPKGETC@,$SUBST_S," \
			-e "s,@USRPKGETCTAR@,$SUBST_ST," \
			$ISODIR/etc/rc.d/mfs_rcd > $ISODIR/etc/rc.d/mfs_rcd.f
		    mv $ISODIR/etc/rc.d/mfs_rcd.f $ISODIR/etc/rc.d/mfs_rcd
		else
		    sed -e "s,@USRPKGETC@,," -e "s,@USRPKGETCTAR@,," \
			$ISODIR/etc/rc.d/mfs_rcd > $ISODIR/etc/rc.d/mfs_rcd.f
		    mv $ISODIR/etc/rc.d/mfs_rcd.f $ISODIR/etc/rc.d/mfs_rcd
		fi

		if [ "${ENABLE_X11}" = "yes" ]; then
		    if [ -f /etc/X11/XF86Config ]; then
			cp /etc/X11/XF86Config $ISODIR/etc/X11
		    fi
		fi

		if [ "${PERSONAL_CONFIG}" = "yes" -a			    \
			-f $config_dir/$pers_conffile ]; then
		    echo
		    showmsg "Running personal config file..."
		    . $config_dir/$pers_conffile
		    showmsg "Done!"
		    echo
		elif [ "${PERSONAL_CONFIG}" = "yes" -a			    \
			! -f $config_dir/$pers_conffile ]; then
		    echo
		    showmsg "Can't find the personal configuration file."
		    showmsg "Skipping it..."
		    echo
		else
		    continue
		fi
		
		# Make sure mfs_rcd has the right permissions, because
		# it could be critical!.

		chmod -R a+rx $ISODIR/etc/rc.d

		if [ ! -f $pkgsrcdist_mntstat ]; then
			showmsg "distfiles directory was not mounted."
		else
			cnt=$(cat $pkgsrcdist_mntstat)
			if [ "$cnt" -gt 1 ]; then
				cnt=$(($cnt - 1))
				echo $cnt > $pkgsrcdist_mntstat
				showmsg "distfiles directory still in use by mklivecd."
			else
				showmsg "Unmounting distfiles directory."
				umount -R $ISODIR/usr/pkgsrc/distfiles
				if [ $? -eq 0 ]; then
					rm $pkgsrcdist_mntstat
				else
					echo "Can't umount $PKGSRCDISTDIR."
				fi
			fi
		fi

		if [ ! -f $pkgsrc_mntstat ]; then
			showmsg "pkgsrc directory was not mounted."
		else
			cnt=$(cat $pkgsrc_mntstat)
			if [ "$cnt" -gt 1 ]; then
				cnt=$(($cnt - 1)) 
				echo $cnt > $pkgsrc_mntstat 
				showmsg "pkgsrc directory still in use by mklivecd."
			else
				showmsg "Unmounting pkgsrc directory."
				umount -R $ISODIR/usr/pkgsrc
				if [ $? -eq 0 ]; then
					rm $pkgsrc_mntstat
				else
					echo "Can't umount $PKGSRCDIR."
				fi
			fi
		fi

		if [ "$verbose_mode" = "on" ]; then
		    showmsg "Size: $(du -sh $ISODIR)"
		fi
	;;
	clean)
		if [ -f $pkgsrc_mntstat -o -f $pkgsrcdist_mntstat ]; then
			showmsg "The pkgsrc directories still in use! Exiting."
			bye 1
		fi
		showmsg "Cleaning WORKDIR: $WORKDIR"
		rm -rf $WORKDIR
		for F in bin dev etc lib libexec mnt rescue \
		    root tmp usr var sbin home
		do
		    if [ -d $ISODIR/$F ]; then
			if [ "$verbose_mode" = "on" ]; then
			    showmsg "Removing $ISODIR/$F."
			fi
			rm -rf $ISODIR/$F
		    fi
		done
		showmsg "Done."
	;;
	iso)
		_do_real_iso_image()
		{
			if [ "$verbose_mode" = "on" ]; then
				echo "=> Removing $IMAGE_NAME.iso..."
			fi

			[ -f "$BASEDIR/$IMAGE_NAME.iso" ] && rm $BASEDIR/$IMAGE_NAME.iso
			[ -d $ISODIR/$BOOTDIR ] && chown -R root:wheel $ISODIR/$BOOTDIR

			if [ ! -f $ISODIR/stand/mfs_etc.tgz ]; then
				showmsg "Target iso failed!"
				showmsg "Can't find mfs_etc.tgz file."
				bye 1
			fi
			showmsg "Removing not needed directories."
			for RM in ${REMOVE_DIRS}
			do
				if [ -d $ISODIR/$RM ]; then
					if [ "$verbose_mode" = "on" ]; then
						echo "=> Removing $RM..."
					fi
					rm -rf $ISODIR/$RM
				else
					echo "=> Nonexistent directory: $RM."
				fi
			done

			sleep 2 # Because I want to see the messages :-)

			showmsg "Creating ISO CD9660 image"
			$MKISOFS $MKISOFS_FIXED_ARGS $MKISOFS_ARGS \
				-b $BOOTDIR/$BOOTIMAGE \
				-o $BASEDIR/$IMAGE_NAME.iso $ISODIR
		}
		if [ -f $BASEDIR/$IMAGE_NAME.iso ]; then
			showmsg "Found a previous ISO image, do you want to override it?"
			echo
			echo "[Press the Enter key to keep your ISO image, otherwise"
			echo " press any other key to proceed removing this file and"
			echo " creating a new one called: $IMAGE_NAME.iso]"
			read output_u
                        if [ -n "$output_u" ]; then
				_do_real_iso_image
			elif [ -z "$output_u" ]; then
				showmsg "Not overwritting ISO image, skipped."
			fi
		else
			_do_real_iso_image
		fi
	;;
	burn)
		if [ ! -f $BASEDIR/$IMAGE_NAME.iso ]; then
		    showmsg "Can't find iso image!, exiting."
		    bye 1
		fi

		if [ $BLANK_BEFORE_BURN = "yes" ]; then
		    $CDRECORD dev=$CDROM_DEVICE $CDRECORD_ARGS blank=fast
		fi
		
		$CDRECORD dev=$CDROM_DEVICE $CDRECORD_ARGS \
		    $BASEDIR/$IMAGE_NAME.iso
	;;
	esac
	
}

checkconf()
{
	if [ -f $config_file ]; then
	    [ $(id -u) -ne 0 ] && showmsg "must be run as root" && bye 1
	    do_conf_reset; do_conf
	else
	    showmsg "$config_file does not exist, exiting."
	    bye 1
	fi
}

# =========================================================================== #
#  Main program								      #
# =========================================================================== #

args=$(getopt c:v $*)
if [ $? -ne 0 ]; then
	usage
fi
set -- $args
while [ $# -gt 0 ]; do
	case "$1" in
	    -c)
		config_file="$config_dir/$2"
		shift
		;;
	    -v)
		verbose_mode=on
		;;
	    --)
		shift; break
		;;
	esac
	shift
done

if [ $# -lt 1 ]; then
	usage
fi

if [ -z "$config_file" ]; then
	config_file=$config_dir/mklivecd.conf
fi

if [ -z "$verbose_mode" ]; then
	verbose_mode=off
fi

target=$1

case "$target" in
	iso)
	    checkconf
	    do_cdlive iso
	;;
	kernel)
	    do_cdlive kernel
	;;
	base)
	    checkconf
	    do_cdlive base
	;;
	chroot)
	    checkconf
	    do_cdlive chroot
	;;
	clean)
	    checkconf
	    do_cdlive clean
	;;
	config)
	    do_conf
	;;
	burn)
	    checkconf
	    do_cdlive burn
	;;
        *)
            usage
        ;;
esac

exit 0 # agur!