diff options
Diffstat (limited to 'kernel/drv/oss_digi96/oss_digi96.man')
| -rw-r--r-- | kernel/drv/oss_digi96/oss_digi96.man | 63 |
1 files changed, 63 insertions, 0 deletions
diff --git a/kernel/drv/oss_digi96/oss_digi96.man b/kernel/drv/oss_digi96/oss_digi96.man new file mode 100644 index 0000000..f13fb66 --- /dev/null +++ b/kernel/drv/oss_digi96/oss_digi96.man @@ -0,0 +1,63 @@ +NAME +oss_digi96 - RME Digi96 professional audio driver. + +DESCRIPTION +Audio driver for the RME Digi96 family of profressional audio controllers. +- Only 16 and 24/32 bit audio formats are supported. +- All Digi96 family members support 32kHz, 44.1kHz, 48kHz, 64kHz, 88.2kHz and +96kHz. sampling rates. + + +MIXER PANEL + +Note! For recording you need to set digi96.sync to INTERNAL and the values + of digi96.mode and digi96.input to match your studio setup. Otherwise + recordings will fail with I/O error. + +There are several settings that can be changed using the ossmix program +shipped with OSS. Note that some features don't work with all Digi96 +family members. For example ADAT mode is not supported by the base +model. + +o digi96.mode <SPDIF|AESEBU|ADAT>: +This setting controls the output mode which can be S/PDIF (consumer), +AES/EBU (professional) or ADAT. The input mode is detected automatically. +If ADAT input is detected the output mode will be switched to ADAT +automatically (this doesn't work in the other direction). + +o digi96.sync <EXTERNAL|INTERNAL>: +This setting tells if the playback sampling rate is based on the internal +oscillator or the sample rate detected in the input port. See also the +definition of the digi96.worldclk setting. + +o digi96.input <OPTICAL|COAXIAL|INTERNAL|XLR>: Selects the active input. + +o digi96.sel <BYPASS|NORMAL>: +When set to BYPASS the input signal will be routed directly to the +output (also sets digi96.sync automatically to EXTERNAL). In this mode +audio data written to /dev/dsp will be muted. + +o digi96.worldclk ON|OFF: +Setting this control to ON will enable the optional worldclock input as +the sample rate source (overrides the digi96.sync setting). + +o digi96.emph ON|OFF: +Enables/disables the de-emphasis option on the analog (monitor) output +connector. + +o digi96.data <AUDIO|AC3>: +Specifies if the output signal is audio or AC3 data (sets the non-audio +bit in the channel status data). + + +OPTIONS +None + +FILES +CONFIGFILEPATH/oss_digi96.conf Device configuration file + +AUTHOR +4Front Technologies + + + |