QA output created by 420
IPC error is expected as application waits until after pmlogger
should be well finished ...


sleeping ...

pmRecordControl(..., PM_REC_OFF, ...): IPC protocol failure

TIMESTAMP  29.0.6 (sample.bin):
                inst [400 or "bin-400"] value 400
                inst [800 or "bin-800"] value 800

TIMESTAMP  29.0.6 (sample.bin):
                inst [400 or "bin-400"] value 400
                inst [800 or "bin-800"] value 800

TIMESTAMP  29.0.6 (sample.bin):
                inst [400 or "bin-400"] value 400
                inst [800 or "bin-800"] value 800

TIMESTAMP  29.0.6 (sample.bin):
                inst [400 or "bin-400"] value 400
                inst [800 or "bin-800"] value 800

TIMESTAMP  29.0.6 (sample.bin):
                inst [400 or "bin-400"] value 400
                inst [800 or "bin-800"] value 800

TIMESTAMP  29.0.6 (sample.bin):
                inst [400 or "bin-400"] value 400
                inst [800 or "bin-800"] value 800

TIMESTAMP  29.0.6 (sample.bin):
                inst [400 or "bin-400"] value 400
                inst [800 or "bin-800"] value 800

TIMESTAMP  29.0.6 (sample.bin):
                inst [400 or "bin-400"] value 400
                inst [800 or "bin-800"] value 800

TIMESTAMP  29.0.6 (sample.bin):
                inst [400 or "bin-400"] value 400
                inst [800 or "bin-800"] value 800

TIMESTAMP  29.0.6 (sample.bin):
                inst [400 or "bin-400"] value 400
                inst [800 or "bin-800"] value 800