> show interface Serial1/0 is up, line protocol is up Hardware is M4T Description: frame-relay using subinterfaces MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, rely 255/255, load 31/255 Encapsulation FRAME-RELAY, loopback not set, keepalive set (10 sec) LMI enq sent 39756, LMI stat recvd 39753, LMI upd recvd 0, DTE LMI up LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0 LMI DLCI 0 LMI type is ANSI Annex D frame relay DTE FR SVC disabled, LAPF state down Broadcast queue 0/200, broadcasts sent/dropped 91696/0, interface broadcasts 85069 Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" counters never Queueing strategy: fifo Output queue 0/8, 0 drops; input queue 0/75, 0 drops 30 second input rate 62000 bits/sec, 9 packets/sec 30 second output rate 8000 bits/sec, 5 packets/sec 2238005 packets input, 630502832 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 111 input errors, 108 CRC, 0 frame, 0 overrun, 0 ignored, 3 abort 2274950 packets output, 230325061 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 output buffer failures, 0 output buffers swapped out 3 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up >