path: root/qa/308

#! /bin/sh
# PCP QA Test No. 308
# pmlogger and pmlc for proc metrics ... indom problems
# pv #452417
#
# Copyright (c) 1995-2002 Silicon Graphics, Inc.  All Rights Reserved.
#

seq=`basename $0`
echo "QA output created by $seq"

# get standard filters
. ./common.product
. ./common.filter
. ./common.check

_filter()
{
    # some of this is because Linux and IRIX mixes produce different
    # PIDs for the proc metrics, and the name of the init process is
    # different
    # And on some Linux systems (e.g. Fedora 18), pid 1 is not init, but
    # /usr/lib/systemd/systemd --switched-root --system --deserialize ...
    #
    _filter_pmdumplog \
    | grep proc.psinfo.ppid \
    | sed -e 's/000*/zeroes.../' \
	  -e 's/ 60\.8\.3 / PID /' \
	  -e 's/ 3\.1\.8 / PID /' \
	  -e 's/ 3\.8\.3 / PID /' \
	  -e 's/ init \[[0-9]*]/ init/' \
	  -e 's/ \/etc\/init\([ "]\)/ init\1/' \
	  -e 's/ \/sbin\/init\([ "]\)/ init\1/' \
	  -e 's/ \/usr\/lib\/systemd\/systemd\([ "]\)/ init\1/' \
	  -e 's/init .*"/init"/'
}

signal=$PCP_BINADM_DIR/pmsignal
status=1	# failure is the default!
trap "rm -f $tmp.*; exit \$status" 0 1 2 3 15

if [ $PCP_PLATFORM = darwin -o $PCP_PLATFORM = solaris ]
then
    _notrun "No proc metrics for $PCP_PLATFORM"
fi

eval `./getpmcdhosts -L -n 2 -m 'proc.psinfo.ppid>=0' | sed -e 's/ / host2=/' -e 's/^/host1=/'`
if [ -z "$host1" ]
then
    _notrun "Cannot get first remote pmcd host with proc.psinfo.ppid metrics"
fi
if [ -z "$host2" ]
then
    _notrun "Cannot get second remote pmcd host with proc.psinfo.ppid metrics"
fi

rm -f $seq.full
echo "host1=$host1" >>$seq.full
echo "host2=$host2" >>$seq.full
done_clean=false

install_on_cleanup=false
pminfo proc >/dev/null 2>&1 && install_on_cleanup=true

_cleanup()
{
    if $done_clean
    then
	:
    else
	if $install_on_cleanup
	then
	    ( cd $PCP_PMDAS_DIR/proc; $sudo ./Install </dev/null >/dev/null 2>&1 )
	else
	    ( cd $PCP_PMDAS_DIR/proc; $sudo ./Remove </dev/null >/dev/null 2>&1 )
	fi
	done_clean=true
    fi
    $sudo rm -f $tmp.*
    exit $status
}
trap "_cleanup; exit \$status" 0 1 2 3 15
( cd $PCP_PMDAS_DIR/proc; $sudo ./Install </dev/null >/dev/null 2>&1 )

# real QA test starts here

echo | tee -a $seq.full
echo "pmlogger directly ..." | tee -a $seq.full
inst=`pminfo -F proc.psinfo.ppid \
      | sed -n -e '/inst \[1 /{
s/^[^"]*"/"/
s/] value .*//
p
}'`

if [ -z "$inst" ]
then
    echo "Arrgh ... cannot find inst for local pid 1" | tee -a $seq.full
    pminfo -F proc.psinfo.ppid >>$seq.full
    exit
fi

echo "inst=$inst" >>$seq.full
ps $PCP_PS_ALL_FLAGS | egrep "PID|$inst" >>$seq.full

cat <<end-of-file >$tmp.conf
log advisory on once { proc.psinfo.ppid[$inst] }
end-of-file

echo "=== pmlogger config ===" >>$seq.full
cat $tmp.conf >>$seq.full

rm -f $tmp.0 $tmp.index $tmp.meta
pmlogger -s 1 -c $tmp.conf -l $tmp.log $tmp
status=$?
if [ $status -ne 0 ]
then
    echo "Warning: pmlogger exit status=$status"
    cat $tmp.log
fi
x=`pmdumplog $tmp | _filter`
if [ -z "$x" ]
then
    echo "Error: pmdumplog | filter produces nothing"
    pmdumplog -a $tmp
else
    echo "$x"
fi

echo | tee -a $seq.full
echo "pmlc for local pmlogger ..." | tee -a $seq.full
rm -f $tmp.0 $tmp.index $tmp.meta $tmp.log
pmlogger -L -s 1 -c /dev/null -l $tmp.log $tmp &
pid=$!
_wait_for_pmlogger $pid $tmp.log
( echo "connect $!"; cat $tmp.conf ) | pmlc
sleep 2
x=`pmdumplog $tmp | _filter`
if [ -z "$x" ]
then
    echo "Error: pmdumplog | filter produces nothing"
    $signal -s TERM $pid
    pmdumplog -a $tmp
else
    echo "$x"
fi

echo | tee -a $seq.full
echo "pmlc local, pmcd and pmlogger remote ..." | tee -a $seq.full

inst=`pminfo -F -h $host1 proc.psinfo.ppid \
      | sed -n -e '/inst \[1 /{
s/^[^"]*"/"/
s/] value .*//
p
}'`
if [ -z "$inst" ]
then
    echo "Arrgh ... cannot find inst for host $host1 pid 1" | tee -a $seq.full
    pminfo -F -h $host1 proc.psinfo.ppid >>$seq.full
    exit
fi
cat <<end-of-file >$tmp.conf
log advisory on once { proc.psinfo.ppid[$inst] }
end-of-file

echo "inst=$inst" >>$seq.full
ssh -q pcpqa@$host1 ps -e | egrep "PID|$inst" >>$seq.full
echo "=== pmlogger config ===" >>$seq.full
cat $tmp.conf >>$seq.full

cat <<end-of-file >$tmp.cmd
. \$PCP_DIR/etc/pcp.env
rm -f /tmp/\$\$.*
( \$PCP_BINADM_DIR/pmlogger -L -s 1 -c /dev/null -l /tmp/\$\$.log /tmp/\$\$ </dev/null >/dev/null 2>&1 ) &
echo rem_pid=\$! rem_tmp=\$\$
end-of-file

scp -q $tmp.cmd pcpqa@$host1:$tmp.cmd
eval `ssh -q pcpqa@$host1 /bin/sh $tmp.cmd`

if [ -z "$rem_pid" ]
then
    echo "Arrgh ... failed to get remote pmlogger pid"
    exit
fi

if [ -z "$rem_tmp" ]
then
    echo "Arrgh ... failed to get remote archive basename"
    exit
fi

# if this fails, /hosts/$host1 may not help to diagnose the failure
# if $host1 is not exporting filesystems via NFS and/or the local
# host is not mounting them via NFS ... only matters if the remote
# pmlogger does not start ...
#
_wait_for_pmlogger "-h $host1 $rem_pid" /hosts/$host1/tmp/$rem_tmp.log

( echo "connect $rem_pid@$host1"; cat $tmp.conf ) | pmlc
sleep 2
rm -f $tmp.0 $tmp.meta $tmp.index
scp -q pcpqa@$host1:/tmp/$rem_tmp.index $tmp.index
scp -q pcpqa@$host1:/tmp/$rem_tmp.meta $tmp.meta
scp -q pcpqa@$host1:/tmp/$rem_tmp.0 $tmp.0
x=`pmdumplog $tmp | _filter`
if [ -z "$x" ]
then
    echo "Error: pmdumplog | filter produces nothing"
    $signal -s TERM $pid
    pmdumplog -a $tmp
else
    echo "$x"
fi
ssh -q pcpqa@$host1 "rm -f /tmp/$rem_tmp.*"

echo | tee -a $seq.full
echo "pmlc local, pmcd remote on one host, pmlogger remote on a different host ..." | tee -a $seq.full
# need this in the format of the pmcd that pmlogger is connected to
#
inst=`pminfo -F -h $host2 proc.psinfo.ppid \
      | sed -n -e '/inst \[1 /{
s/^[^"]*"/"/
s/] value .*//
p
}'`
if [ -z "$inst" ]
then
    echo "Arrgh ... cannot find inst for host $host2 pid 1" | tee -a $seq.full
    pminfo -F -h $host2 proc.psinfo.ppid >>$seq.full
    exit
fi
cat <<end-of-file >$tmp.conf
log advisory on once { proc.psinfo.ppid[$inst] }
end-of-file

echo "inst=$inst" >>$seq.full
ssh -q pcpqa@$host2 ps -e | egrep "PID|$inst" >>$seq.full
echo "=== pmlogger config ===" >>$seq.full
cat $tmp.conf >>$seq.full

cat <<end-of-file >$tmp.cmd
. \$PCP_DIR/etc/pcp.env
rm -f /tmp/\$\$.*
( \$PCP_BINADM_DIR/pmlogger -h $host2 -L -s 1 -c /dev/null -l /tmp/\$\$.log /tmp/\$\$ </dev/null >/dev/null 2>&1 ) &
echo rem_pid=\$! rem_tmp=\$\$
end-of-file

scp $tmp.cmd pcpqa@$host1:$tmp.cmd
eval `ssh -q pcpqa@$host1 /bin/sh $tmp.cmd`

if [ -z "$rem_pid" ]
then
    echo "Arrgh ... failed to get remote pmlogger pid"
    exit
fi

if [ -z "$rem_tmp" ]
then
    echo "Arrgh ... failed to get remote archive basename"
    exit
fi

# see note above about /hosts/$host1
#
_wait_for_pmlogger "-h $host1 $rem_pid" /hosts/$host1/tmp/$rem_tmp.log

( echo "connect $rem_pid@$host1"; cat $tmp.conf ) | pmlc
sleep 2
rm -f $tmp.0 $tmp.meta $tmp.index
scp pcpqa@$host1:/tmp/$rem_tmp.index $tmp.index
scp pcpqa@$host1:/tmp/$rem_tmp.meta $tmp.meta
scp pcpqa@$host1:/tmp/$rem_tmp.0 $tmp.0
x=`pmdumplog $tmp | _filter`
if [ -z "$x" ]
then
    echo "Error: pmdumplog | filter produces nothing"
    $signal -s TERM $pid
    pmdumplog -a $tmp
else
    echo "$x"
fi
ssh -q pcpqa@$host1 "rm -f /tmp/$rem_tmp.*"

# success, all done
status=0
exit