diff options
Diffstat (limited to 'srclib/apr/build/apr_common.m4')
| -rw-r--r-- | srclib/apr/build/apr_common.m4 | 65 |
1 files changed, 32 insertions, 33 deletions
diff --git a/srclib/apr/build/apr_common.m4 b/srclib/apr/build/apr_common.m4 index caae9bfa..2afb4666 100644 --- a/srclib/apr/build/apr_common.m4 +++ b/srclib/apr/build/apr_common.m4 @@ -23,7 +23,7 @@ dnl APR_CONFIG_NICE(filename) dnl dnl Saves a snapshot of the configure command-line for later reuse dnl -AC_DEFUN(APR_CONFIG_NICE,[ +AC_DEFUN([APR_CONFIG_NICE], [ rm -f $1 cat >$1<<EOF #! /bin/sh @@ -80,7 +80,7 @@ EOF dnl APR_MKDIR_P_CHECK(fallback-mkdir-p) dnl checks whether mkdir -p works -AC_DEFUN(APR_MKDIR_P_CHECK,[ +AC_DEFUN([APR_MKDIR_P_CHECK], [ AC_CACHE_CHECK(for working mkdir -p, ac_cv_mkdir_p,[ test -d conftestdir && rm -rf conftestdir mkdir -p conftestdir/somedir >/dev/null 2>&1 @@ -118,7 +118,7 @@ dnl dnl Trying to optimize this is left as an exercise to the reader who wants dnl to put up with more autoconf craziness. I give up. dnl -AC_DEFUN(APR_SUBDIR_CONFIG, [ +AC_DEFUN([APR_SUBDIR_CONFIG], [ # save our work to this point; this allows the sub-package to use it AC_CACHE_SAVE @@ -161,8 +161,8 @@ changequote([, ])dnl # autoconf doesn't add --silent to ac_configure_args; explicitly pass it test "x$silent" = "xyes" && apr_configure_args="$apr_configure_args --silent" - dnl The eval makes quoting arguments work - specifically $2 where the - dnl quoting mechanisms used is "" rather than []. + dnl The eval makes quoting arguments work - specifically the second argument + dnl where the quoting mechanisms used is "" rather than []. dnl dnl We need to execute another shell because some autoconf/shell combinations dnl will choke after doing repeated APR_SUBDIR_CONFIG()s. (Namely Solaris @@ -186,7 +186,7 @@ dnl APR_SAVE_THE_ENVIRONMENT(variable_name) dnl dnl Stores the variable (usually a Makefile macro) for later restoration dnl -AC_DEFUN(APR_SAVE_THE_ENVIRONMENT,[ +AC_DEFUN([APR_SAVE_THE_ENVIRONMENT], [ apr_ste_save_$1="$$1" ])dnl @@ -198,7 +198,7 @@ dnl has added to the variable, moving the new bits to prefix_variable_name dnl and restoring the original variable contents. This makes it possible dnl for a user to override configure when it does something stupid. dnl -AC_DEFUN(APR_RESTORE_THE_ENVIRONMENT,[ +AC_DEFUN([APR_RESTORE_THE_ENVIRONMENT], [ if test "x$apr_ste_save_$1" = "x"; then $2$1="$$1" $1= @@ -222,7 +222,7 @@ dnl APR_SETIFNULL(variable, value) dnl dnl Set variable iff it's currently null dnl -AC_DEFUN(APR_SETIFNULL,[ +AC_DEFUN([APR_SETIFNULL], [ if test -z "$$1"; then test "x$silent" != "xyes" && echo " setting $1 to \"$2\"" $1="$2" @@ -234,7 +234,7 @@ dnl APR_SETVAR(variable, value) dnl dnl Set variable no matter what dnl -AC_DEFUN(APR_SETVAR,[ +AC_DEFUN([APR_SETVAR], [ test "x$silent" != "xyes" && echo " forcing $1 to \"$2\"" $1="$2" ])dnl @@ -244,7 +244,7 @@ dnl APR_ADDTO(variable, value) dnl dnl Add value to variable dnl -AC_DEFUN(APR_ADDTO,[ +AC_DEFUN([APR_ADDTO], [ if test "x$$1" = "x"; then test "x$silent" != "xyes" && echo " setting $1 to \"$2\"" $1="$2" @@ -271,7 +271,7 @@ dnl APR_REMOVEFROM(variable, value) dnl dnl Remove a value from a variable dnl -AC_DEFUN(APR_REMOVEFROM,[ +AC_DEFUN([APR_REMOVEFROM], [ if test "x$$1" = "x$2"; then test "x$silent" != "xyes" && echo " nulling $1" $1="" @@ -295,7 +295,7 @@ AC_DEFUN(APR_REMOVEFROM,[ dnl dnl APR_CHECK_DEFINE_FILES( symbol, header_file [header_file ...] ) dnl -AC_DEFUN(APR_CHECK_DEFINE_FILES,[ +AC_DEFUN([APR_CHECK_DEFINE_FILES], [ AC_CACHE_CHECK([for $1 in $2],ac_cv_define_$1,[ ac_cv_define_$1=no for curhdr in $2 @@ -317,7 +317,7 @@ YES_IS_DEFINED dnl dnl APR_CHECK_DEFINE(symbol, header_file) dnl -AC_DEFUN(APR_CHECK_DEFINE,[ +AC_DEFUN([APR_CHECK_DEFINE], [ AC_CACHE_CHECK([for $1 in $2],ac_cv_define_$1,[ AC_EGREP_CPP(YES_IS_DEFINED, [ #include <$2> @@ -334,7 +334,7 @@ YES_IS_DEFINED dnl dnl APR_CHECK_APR_DEFINE( symbol ) dnl -AC_DEFUN(APR_CHECK_APR_DEFINE,[ +AC_DEFUN([APR_CHECK_APR_DEFINE], [ apr_old_cppflags=$CPPFLAGS CPPFLAGS="$CPPFLAGS $INCLUDES" AC_EGREP_CPP(YES_IS_DEFINED, [ @@ -450,12 +450,12 @@ dnl dnl A variant of AC_CHECK_SIZEOF which allows the checking of dnl sizes of non-builtin types dnl -AC_DEFUN(APR_CHECK_SIZEOF_EXTENDED, -[changequote(<<,>>)dnl -dnl The name to #define +AC_DEFUN([APR_CHECK_SIZEOF_EXTENDED], +[changequote(<<, >>)dnl +dnl The name to #define. define(<<AC_TYPE_NAME>>, translit(sizeof_$2, [a-z *], [A-Z_P]))dnl -dnl The cache variable -define(<<AC_CV_NAME>>, translit(ac_cv_sizeof_$2, [ *],[<p>]))dnl +dnl The cache variable name. +define(<<AC_CV_NAME>>, translit(ac_cv_sizeof_$2, [ *], [_p]))dnl changequote([, ])dnl AC_MSG_CHECKING(size of $2) AC_CACHE_VAL(AC_CV_NAME, @@ -463,7 +463,7 @@ AC_CACHE_VAL(AC_CV_NAME, $1 main() { - FILE *f=fopen("conftestval","w"); + FILE *f=fopen("conftestval", "w"); if (!f) exit(1); fprintf(f, "%d\n", sizeof($2)); exit(0); @@ -511,7 +511,7 @@ dnl for failure), or it returns a pointer to the error dnl string. dnl dnl -AC_DEFUN(APR_CHECK_STRERROR_R_RC,[ +AC_DEFUN([APR_CHECK_STRERROR_R_RC], [ AC_MSG_CHECKING(for type of return code from strerror_r) AC_TRY_RUN([ #include <errno.h> @@ -546,7 +546,7 @@ dnl Decide if d_fileno or d_ino are available in the dirent dnl structure on this platform. Single UNIX Spec says d_ino, dnl BSD uses d_fileno. Undef to find the real beast. dnl -AC_DEFUN(APR_CHECK_DIRENT_INODE, [ +AC_DEFUN([APR_CHECK_DIRENT_INODE], [ AC_CACHE_CHECK([for inode member of struct dirent], apr_cv_dirent_inode, [ apr_cv_dirent_inode=no AC_TRY_COMPILE([ @@ -584,7 +584,7 @@ dnl on this platform. Not part of the Single UNIX Spec. dnl Note that this is worthless without DT_xxx macros, so dnl look for one while we are at it. dnl -AC_DEFUN(APR_CHECK_DIRENT_TYPE,[ +AC_DEFUN([APR_CHECK_DIRENT_TYPE], [ AC_CACHE_CHECK([for file type member of struct dirent], apr_cv_dirent_type,[ apr_cv_dirent_type=no AC_TRY_COMPILE([ @@ -633,7 +633,7 @@ dnl by changing all "/" to "_" in the HEADER-FILE and dropping dnl all "." and "-" chars. If the 3rd parameter is "yes" then instead of dnl setting to 1 or 0, we set FLAG-TO-SET to yes or no. dnl -AC_DEFUN(APR_FLAG_HEADERS,[ +AC_DEFUN([APR_FLAG_HEADERS], [ AC_CHECK_HEADERS($1) for aprt_i in $1 do @@ -654,7 +654,7 @@ dnl we use what's provided as FLAG-TO-SET. If the 3rd parameter dnl is "yes" then instead of setting to 1 or 0, we set FLAG-TO-SET dnl to yes or no. dnl -AC_DEFUN(APR_FLAG_FUNCS,[ +AC_DEFUN([APR_FLAG_FUNCS], [ AC_CHECK_FUNCS($1) for aprt_j in $1 do @@ -679,7 +679,7 @@ dnl baz='${bar}/3' dnl APR_EXPAND_VAR(fraz, $baz) dnl $fraz is now "1/2/3" dnl -AC_DEFUN(APR_EXPAND_VAR,[ +AC_DEFUN([APR_EXPAND_VAR], [ ap_last= ap_cur="$2" while test "x${ap_cur}" != "x${ap_last}"; @@ -698,7 +698,7 @@ dnl Example: dnl orig_path="${prefix}/bar" dnl APR_PATH_RELATIVE(final_path, $orig_path, $prefix) dnl $final_path now contains "bar" -AC_DEFUN(APR_PATH_RELATIVE,[ +AC_DEFUN([APR_PATH_RELATIVE], [ ap_stripped=`echo $2 | sed -e "s#^$3##"` # check if the stripping was successful if test "x$2" != "x${ap_stripped}"; then @@ -716,12 +716,12 @@ dnl AC_HELP_STRING, so let's try to call it if we can. dnl Note: this define must be on one line so that it can be properly returned dnl as the help string. When using this macro with a multi-line RHS, ensure dnl that you surround the macro invocation with []s -AC_DEFUN(APR_HELP_STRING,[ifelse(regexp(AC_ACVERSION, 2\.1), -1, AC_HELP_STRING([$1],[$2]),[ ][$1] substr([ ],len($1))[$2])]) +AC_DEFUN([APR_HELP_STRING], [ifelse(regexp(AC_ACVERSION, 2\.1), -1, AC_HELP_STRING([$1],[$2]),[ ][$1] substr([ ],len($1))[$2])]) dnl dnl APR_LAYOUT(configlayout, layoutname [, extravars]) dnl -AC_DEFUN(APR_LAYOUT,[ +AC_DEFUN([APR_LAYOUT], [ if test ! -f $srcdir/config.layout; then echo "** Error: Layout file $srcdir/config.layout not found" echo "** Error: Cannot use undefined layout '$LAYOUT'" @@ -784,7 +784,7 @@ AC_DEFUN(APR_LAYOUT,[ dnl dnl APR_ENABLE_LAYOUT(default layout name [, extra vars]) dnl -AC_DEFUN(APR_ENABLE_LAYOUT,[ +AC_DEFUN([APR_ENABLE_LAYOUT], [ AC_ARG_ENABLE(layout, [ --enable-layout=LAYOUT],[ LAYOUT=$enableval @@ -805,7 +805,7 @@ dnl APR_PARSE_ARGUMENTS dnl a reimplementation of autoconf's argument parser, dnl used here to allow us to co-exist layouts and argument based dnl set ups. -AC_DEFUN(APR_PARSE_ARGUMENTS,[ +AC_DEFUN([APR_PARSE_ARGUMENTS], [ ac_prev= # Retrieve the command-line arguments. The eval is needed because # the arguments are quoted to preserve accuracy. @@ -931,7 +931,7 @@ dnl APR_CHECK_DEPEND dnl dnl Determine what program we can use to generate .deps-style dependencies dnl -AC_DEFUN(APR_CHECK_DEPEND,[ +AC_DEFUN([APR_CHECK_DEPEND], [ dnl Try to determine what depend program we can use dnl All GCC-variants should have -MM. dnl If not, then we can check on those, too. @@ -974,4 +974,3 @@ AC_TRY_COMPILE(AC_INCLUDES_DEFAULT, [ ], [apr_cvname=yes $3], [apr_cvname=no])]) ]) - |