From 80db94fff6a9620fb469ee911347ed973e3f7735 Mon Sep 17 00:00:00 2001 From: Stefan Fritsch Date: Tue, 27 Dec 2011 19:42:03 +0100 Subject: Upstream tarball 2.2.3 --- include/httpd.h | 1851 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1851 insertions(+) create mode 100644 include/httpd.h (limited to 'include/httpd.h') diff --git a/include/httpd.h b/include/httpd.h new file mode 100644 index 00000000..35124541 --- /dev/null +++ b/include/httpd.h @@ -0,0 +1,1851 @@ +/* Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed with + * this work for additional information regarding copyright ownership. + * The ASF licenses this file to You under the Apache License, Version 2.0 + * (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/** + * @file httpd.h + * @brief HTTP Daemon routines + * + * @defgroup APACHE Apache + * + * Top level group of which all other groups are a member + * @{ + * + * @defgroup APACHE_MODS Apache Modules + * Top level group for Apache Modules + * @defgroup APACHE_OS Operating System Specific + * @defgroup APACHE_CORE Apache Core + * @{ + * @defgroup APACHE_CORE_DAEMON HTTP Daemon Routine + * @{ + */ + +#ifndef APACHE_HTTPD_H +#define APACHE_HTTPD_H + +/* XXX - We need to push more stuff to other .h files, or even .c files, to + * make this file smaller + */ + +/* Headers in which EVERYONE has an interest... */ +#include "ap_config.h" +#include "ap_mmn.h" + +#include "ap_release.h" + +#include "apr.h" +#include "apr_general.h" +#include "apr_tables.h" +#include "apr_pools.h" +#include "apr_time.h" +#include "apr_network_io.h" +#include "apr_buckets.h" +#include "apr_poll.h" + +#include "os.h" + +#include "ap_regex.h" + +#if APR_HAVE_STDLIB_H +#include +#endif + +/* Note: apr_uri.h is also included, see below */ + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef CORE_PRIVATE + +/* ----------------------------- config dir ------------------------------ */ + +/** Define this to be the default server home dir. Most things later in this + * file with a relative pathname will have this added. + */ +#ifndef HTTPD_ROOT +#ifdef OS2 +/** Set default for OS/2 file system */ +#define HTTPD_ROOT "/os2httpd" +#elif defined(WIN32) +/** Set default for Windows file system */ +#define HTTPD_ROOT "/apache" +#elif defined (BEOS) +/** Set the default for BeOS */ +#define HTTPD_ROOT "/boot/home/apache" +#elif defined (NETWARE) +/** Set the default for NetWare */ +#define HTTPD_ROOT "/apache" +#else +/** Set for all other OSs */ +#define HTTPD_ROOT "/usr/local/apache" +#endif +#endif /* HTTPD_ROOT */ + +/* + * --------- You shouldn't have to edit anything below this line ---------- + * + * Any modifications to any defaults not defined above should be done in the + * respective configuration file. + * + */ + +/** + * Default location of documents. Can be overridden by the DocumentRoot + * directive. + */ +#ifndef DOCUMENT_LOCATION +#ifdef OS2 +/* Set default for OS/2 file system */ +#define DOCUMENT_LOCATION HTTPD_ROOT "/docs" +#else +/* Set default for non OS/2 file system */ +#define DOCUMENT_LOCATION HTTPD_ROOT "/htdocs" +#endif +#endif /* DOCUMENT_LOCATION */ + +/** Maximum number of dynamically loaded modules */ +#ifndef DYNAMIC_MODULE_LIMIT +#define DYNAMIC_MODULE_LIMIT 128 +#endif + +/** Default administrator's address */ +#define DEFAULT_ADMIN "[no address given]" + +/** The name of the log files */ +#ifndef DEFAULT_ERRORLOG +#if defined(OS2) || defined(WIN32) +#define DEFAULT_ERRORLOG "logs/error.log" +#else +#define DEFAULT_ERRORLOG "logs/error_log" +#endif +#endif /* DEFAULT_ERRORLOG */ + +/** Define this to be what your per-directory security files are called */ +#ifndef DEFAULT_ACCESS_FNAME +#ifdef OS2 +/* Set default for OS/2 file system */ +#define DEFAULT_ACCESS_FNAME "htaccess" +#else +#define DEFAULT_ACCESS_FNAME ".htaccess" +#endif +#endif /* DEFAULT_ACCESS_FNAME */ + +/** The name of the server config file */ +#ifndef SERVER_CONFIG_FILE +#define SERVER_CONFIG_FILE "conf/httpd.conf" +#endif + +/** The default path for CGI scripts if none is currently set */ +#ifndef DEFAULT_PATH +#define DEFAULT_PATH "/bin:/usr/bin:/usr/ucb:/usr/bsd:/usr/local/bin" +#endif + +/** The path to the suExec wrapper, can be overridden in Configuration */ +#ifndef SUEXEC_BIN +#define SUEXEC_BIN HTTPD_ROOT "/bin/suexec" +#endif + +/** The timeout for waiting for messages */ +#ifndef DEFAULT_TIMEOUT +#define DEFAULT_TIMEOUT 300 +#endif + +/** The timeout for waiting for keepalive timeout until next request */ +#ifndef DEFAULT_KEEPALIVE_TIMEOUT +#define DEFAULT_KEEPALIVE_TIMEOUT 5 +#endif + +/** The number of requests to entertain per connection */ +#ifndef DEFAULT_KEEPALIVE +#define DEFAULT_KEEPALIVE 100 +#endif + +/* + * Limits on the size of various request items. These limits primarily + * exist to prevent simple denial-of-service attacks on a server based + * on misuse of the protocol. The recommended values will depend on the + * nature of the server resources -- CGI scripts and database backends + * might require large values, but most servers could get by with much + * smaller limits than we use below. The request message body size can + * be limited by the per-dir config directive LimitRequestBody. + * + * Internal buffer sizes are two bytes more than the DEFAULT_LIMIT_REQUEST_LINE + * and DEFAULT_LIMIT_REQUEST_FIELDSIZE below, which explains the 8190. + * These two limits can be lowered (but not raised) by the server config + * directives LimitRequestLine and LimitRequestFieldsize, respectively. + * + * DEFAULT_LIMIT_REQUEST_FIELDS can be modified or disabled (set = 0) by + * the server config directive LimitRequestFields. + */ + +/** default limit on bytes in Request-Line (Method+URI+HTTP-version) */ +#ifndef DEFAULT_LIMIT_REQUEST_LINE +#define DEFAULT_LIMIT_REQUEST_LINE 8190 +#endif +/** default limit on bytes in any one header field */ +#ifndef DEFAULT_LIMIT_REQUEST_FIELDSIZE +#define DEFAULT_LIMIT_REQUEST_FIELDSIZE 8190 +#endif +/** default limit on number of request header fields */ +#ifndef DEFAULT_LIMIT_REQUEST_FIELDS +#define DEFAULT_LIMIT_REQUEST_FIELDS 100 +#endif + +/** + * The default default character set name to add if AddDefaultCharset is + * enabled. Overridden with AddDefaultCharsetName. + */ +#define DEFAULT_ADD_DEFAULT_CHARSET_NAME "iso-8859-1" + +#endif /* CORE_PRIVATE */ + +/** default HTTP Server protocol */ +#define AP_SERVER_PROTOCOL "HTTP/1.1" + + +/* ------------------ stuff that modules are allowed to look at ----------- */ + +/** Define this to be what your HTML directory content files are called */ +#ifndef AP_DEFAULT_INDEX +#define AP_DEFAULT_INDEX "index.html" +#endif + + +/** + * Define this to be what type you'd like returned for files with unknown + * suffixes. + * @warning MUST be all lower case. + */ +#ifndef DEFAULT_CONTENT_TYPE +#define DEFAULT_CONTENT_TYPE "text/plain" +#endif + +/** The name of the MIME types file */ +#ifndef AP_TYPES_CONFIG_FILE +#define AP_TYPES_CONFIG_FILE "conf/mime.types" +#endif + +/* + * Define the HTML doctype strings centrally. + */ +/** HTML 2.0 Doctype */ +#define DOCTYPE_HTML_2_0 "\n" +/** HTML 3.2 Doctype */ +#define DOCTYPE_HTML_3_2 "\n" +/** HTML 4.0 Strict Doctype */ +#define DOCTYPE_HTML_4_0S "\n" +/** HTML 4.0 Transitional Doctype */ +#define DOCTYPE_HTML_4_0T "\n" +/** HTML 4.0 Frameset Doctype */ +#define DOCTYPE_HTML_4_0F "\n" +/** XHTML 1.0 Strict Doctype */ +#define DOCTYPE_XHTML_1_0S "\n" +/** XHTML 1.0 Transitional Doctype */ +#define DOCTYPE_XHTML_1_0T "\n" +/** XHTML 1.0 Frameset Doctype */ +#define DOCTYPE_XHTML_1_0F "" + +/** Internal representation for a HTTP protocol number, e.g., HTTP/1.1 */ +#define HTTP_VERSION(major,minor) (1000*(major)+(minor)) +/** Major part of HTTP protocol */ +#define HTTP_VERSION_MAJOR(number) ((number)/1000) +/** Minor part of HTTP protocol */ +#define HTTP_VERSION_MINOR(number) ((number)%1000) + +/* -------------- Port number for server running standalone --------------- */ + +/** default HTTP Port */ +#define DEFAULT_HTTP_PORT 80 +/** default HTTPS Port */ +#define DEFAULT_HTTPS_PORT 443 +/** + * Check whether @a port is the default port for the request @a r. + * @param port The port number + * @param r The request + * @see #ap_default_port + */ +#define ap_is_default_port(port,r) ((port) == ap_default_port(r)) +/** + * Get the default port for a request (which depends on the scheme). + * @param r The request + */ +#define ap_default_port(r) ap_run_default_port(r) +/** + * Get the scheme for a request. + * @param r The request + */ +#define ap_http_scheme(r) ap_run_http_scheme(r) + +/** The default string length */ +#define MAX_STRING_LEN HUGE_STRING_LEN + +/** The length of a Huge string */ +#define HUGE_STRING_LEN 8192 + +/** The size of the server's internal read-write buffers */ +#define AP_IOBUFSIZE 8192 + +/** The max number of regex captures that can be expanded by ap_pregsub */ +#define AP_MAX_REG_MATCH 10 + +/** + * APR_HAS_LARGE_FILES introduces the problem of spliting sendfile into + * mutiple buckets, no greater than MAX(apr_size_t), and more granular + * than that in case the brigade code/filters attempt to read it directly. + * ### 16mb is an invention, no idea if it is reasonable. + */ +#define AP_MAX_SENDFILE 16777216 /* 2^24 */ + +/** + * Special Apache error codes. These are basically used + * in http_main.c so we can keep track of various errors. + * + */ +/** a normal exit */ +#define APEXIT_OK 0x0 +/** A fatal error arising during the server's init sequence */ +#define APEXIT_INIT 0x2 +/** The child died during its init sequence */ +#define APEXIT_CHILDINIT 0x3 +/** + * The child exited due to a resource shortage. + * The parent should limit the rate of forking until + * the situation is resolved. + */ +#define APEXIT_CHILDSICK 0x7 +/** + * A fatal error, resulting in the whole server aborting. + * If a child exits with this error, the parent process + * considers this a server-wide fatal error and aborts. + */ +#define APEXIT_CHILDFATAL 0xf + +#ifndef AP_DECLARE +/** + * Stuff marked #AP_DECLARE is part of the API, and intended for use + * by modules. Its purpose is to allow us to add attributes that + * particular platforms or compilers require to every exported function. + */ +# define AP_DECLARE(type) type +#endif + +#ifndef AP_DECLARE_NONSTD +/** + * Stuff marked #AP_DECLARE_NONSTD is part of the API, and intended for + * use by modules. The difference between #AP_DECLARE and + * #AP_DECLARE_NONSTD is that the latter is required for any functions + * which use varargs or are used via indirect function call. This + * is to accomodate the two calling conventions in windows dlls. + */ +# define AP_DECLARE_NONSTD(type) type +#endif +#ifndef AP_DECLARE_DATA +# define AP_DECLARE_DATA +#endif + +#ifndef AP_MODULE_DECLARE +# define AP_MODULE_DECLARE(type) type +#endif +#ifndef AP_MODULE_DECLARE_NONSTD +# define AP_MODULE_DECLARE_NONSTD(type) type +#endif +#ifndef AP_MODULE_DECLARE_DATA +# define AP_MODULE_DECLARE_DATA +#endif + +/** + * @internal + * modules should not use functions marked AP_CORE_DECLARE + */ +#ifndef AP_CORE_DECLARE +# define AP_CORE_DECLARE AP_DECLARE +#endif + +/** + * @internal + * modules should not use functions marked AP_CORE_DECLARE_NONSTD + */ + +#ifndef AP_CORE_DECLARE_NONSTD +# define AP_CORE_DECLARE_NONSTD AP_DECLARE_NONSTD +#endif + +/** + * @brief The numeric version information is broken out into fields within this + * structure. + */ +typedef struct { + int major; /**< major number */ + int minor; /**< minor number */ + int patch; /**< patch number */ + const char *add_string; /**< additional string like "-dev" */ +} ap_version_t; + +/** + * Return httpd's version information in a numeric form. + * + * @param version Pointer to a version structure for returning the version + * information. + */ +AP_DECLARE(void) ap_get_server_revision(ap_version_t *version); + +/** + * Get the server version string + * @return The server version string + */ +AP_DECLARE(const char *) ap_get_server_version(void); + +/** + * Add a component to the version string + * @param pconf The pool to allocate the component from + * @param component The string to add + */ +AP_DECLARE(void) ap_add_version_component(apr_pool_t *pconf, const char *component); + +/** + * Get the date a time that the server was built + * @return The server build time string + */ +AP_DECLARE(const char *) ap_get_server_built(void); + +#define DECLINED -1 /**< Module declines to handle */ +#define DONE -2 /**< Module has served the response completely + * - it's safe to die() with no more output + */ +#define OK 0 /**< Module has handled this stage. */ + + +/** + * @defgroup HTTP_Status HTTP Status Codes + * @{ + */ +/** + * The size of the static array in http_protocol.c for storing + * all of the potential response status-lines (a sparse table). + * A future version should dynamically generate the apr_table_t at startup. + */ +#define RESPONSE_CODES 57 + +#define HTTP_CONTINUE 100 +#define HTTP_SWITCHING_PROTOCOLS 101 +#define HTTP_PROCESSING 102 +#define HTTP_OK 200 +#define HTTP_CREATED 201 +#define HTTP_ACCEPTED 202 +#define HTTP_NON_AUTHORITATIVE 203 +#define HTTP_NO_CONTENT 204 +#define HTTP_RESET_CONTENT 205 +#define HTTP_PARTIAL_CONTENT 206 +#define HTTP_MULTI_STATUS 207 +#define HTTP_MULTIPLE_CHOICES 300 +#define HTTP_MOVED_PERMANENTLY 301 +#define HTTP_MOVED_TEMPORARILY 302 +#define HTTP_SEE_OTHER 303 +#define HTTP_NOT_MODIFIED 304 +#define HTTP_USE_PROXY 305 +#define HTTP_TEMPORARY_REDIRECT 307 +#define HTTP_BAD_REQUEST 400 +#define HTTP_UNAUTHORIZED 401 +#define HTTP_PAYMENT_REQUIRED 402 +#define HTTP_FORBIDDEN 403 +#define HTTP_NOT_FOUND 404 +#define HTTP_METHOD_NOT_ALLOWED 405 +#define HTTP_NOT_ACCEPTABLE 406 +#define HTTP_PROXY_AUTHENTICATION_REQUIRED 407 +#define HTTP_REQUEST_TIME_OUT 408 +#define HTTP_CONFLICT 409 +#define HTTP_GONE 410 +#define HTTP_LENGTH_REQUIRED 411 +#define HTTP_PRECONDITION_FAILED 412 +#define HTTP_REQUEST_ENTITY_TOO_LARGE 413 +#define HTTP_REQUEST_URI_TOO_LARGE 414 +#define HTTP_UNSUPPORTED_MEDIA_TYPE 415 +#define HTTP_RANGE_NOT_SATISFIABLE 416 +#define HTTP_EXPECTATION_FAILED 417 +#define HTTP_UNPROCESSABLE_ENTITY 422 +#define HTTP_LOCKED 423 +#define HTTP_FAILED_DEPENDENCY 424 +#define HTTP_UPGRADE_REQUIRED 426 +#define HTTP_INTERNAL_SERVER_ERROR 500 +#define HTTP_NOT_IMPLEMENTED 501 +#define HTTP_BAD_GATEWAY 502 +#define HTTP_SERVICE_UNAVAILABLE 503 +#define HTTP_GATEWAY_TIME_OUT 504 +#define HTTP_VERSION_NOT_SUPPORTED 505 +#define HTTP_VARIANT_ALSO_VARIES 506 +#define HTTP_INSUFFICIENT_STORAGE 507 +#define HTTP_NOT_EXTENDED 510 + +/** is the status code informational */ +#define ap_is_HTTP_INFO(x) (((x) >= 100)&&((x) < 200)) +/** is the status code OK ?*/ +#define ap_is_HTTP_SUCCESS(x) (((x) >= 200)&&((x) < 300)) +/** is the status code a redirect */ +#define ap_is_HTTP_REDIRECT(x) (((x) >= 300)&&((x) < 400)) +/** is the status code a error (client or server) */ +#define ap_is_HTTP_ERROR(x) (((x) >= 400)&&((x) < 600)) +/** is the status code a client error */ +#define ap_is_HTTP_CLIENT_ERROR(x) (((x) >= 400)&&((x) < 500)) +/** is the status code a server error */ +#define ap_is_HTTP_SERVER_ERROR(x) (((x) >= 500)&&((x) < 600)) + +/** should the status code drop the connection */ +#define ap_status_drops_connection(x) \ + (((x) == HTTP_BAD_REQUEST) || \ + ((x) == HTTP_REQUEST_TIME_OUT) || \ + ((x) == HTTP_LENGTH_REQUIRED) || \ + ((x) == HTTP_REQUEST_ENTITY_TOO_LARGE) || \ + ((x) == HTTP_REQUEST_URI_TOO_LARGE) || \ + ((x) == HTTP_INTERNAL_SERVER_ERROR) || \ + ((x) == HTTP_SERVICE_UNAVAILABLE) || \ + ((x) == HTTP_NOT_IMPLEMENTED)) +/** @} */ + +/** + * @defgroup Methods List of Methods recognized by the server + * @ingroup APACHE_CORE_DAEMON + * @{ + * + * @brief Methods recognized (but not necessarily handled) by the server. + * + * These constants are used in bit shifting masks of size int, so it is + * unsafe to have more methods than bits in an int. HEAD == M_GET. + * This list must be tracked by the list in http_protocol.c in routine + * ap_method_name_of(). + * + */ + +#define M_GET 0 /** RFC 2616: HTTP */ +#define M_PUT 1 /* : */ +#define M_POST 2 +#define M_DELETE 3 +#define M_CONNECT 4 +#define M_OPTIONS 5 +#define M_TRACE 6 /** RFC 2616: HTTP */ +#define M_PATCH 7 /** no rfc(!) ### remove this one? */ +#define M_PROPFIND 8 /** RFC 2518: WebDAV */ +#define M_PROPPATCH 9 /* : */ +#define M_MKCOL 10 +#define M_COPY 11 +#define M_MOVE 12 +#define M_LOCK 13 +#define M_UNLOCK 14 /** RFC 2518: WebDAV */ +#define M_VERSION_CONTROL 15 /** RFC 3253: WebDAV Versioning */ +#define M_CHECKOUT 16 /* : */ +#define M_UNCHECKOUT 17 +#define M_CHECKIN 18 +#define M_UPDATE 19 +#define M_LABEL 20 +#define M_REPORT 21 +#define M_MKWORKSPACE 22 +#define M_MKACTIVITY 23 +#define M_BASELINE_CONTROL 24 +#define M_MERGE 25 +#define M_INVALID 26 /** RFC 3253: WebDAV Versioning */ + +/** + * METHODS needs to be equal to the number of bits + * we are using for limit masks. + */ +#define METHODS 64 + +/** + * The method mask bit to shift for anding with a bitmask. + */ +#define AP_METHOD_BIT ((apr_int64_t)1) +/** @} */ + + +/** @see ap_method_list_t */ +typedef struct ap_method_list_t ap_method_list_t; + +/** + * @struct ap_method_list_t + * @brief Structure for handling HTTP methods. + * + * Methods known to the server are accessed via a bitmask shortcut; + * extension methods are handled by an array. + */ +struct ap_method_list_t { + /** The bitmask used for known methods */ + apr_int64_t method_mask; + /** the array used for extension methods */ + apr_array_header_t *method_list; +}; + +/** + * @defgroup module_magic Module Magic mime types + * @{ + */ +/** Magic for mod_cgi[d] */ +#define CGI_MAGIC_TYPE "application/x-httpd-cgi" +/** Magic for mod_include */ +#define INCLUDES_MAGIC_TYPE "text/x-server-parsed-html" +/** Magic for mod_include */ +#define INCLUDES_MAGIC_TYPE3 "text/x-server-parsed-html3" +/** Magic for mod_dir */ +#define DIR_MAGIC_TYPE "httpd/unix-directory" + +/** @} */ +/* Just in case your linefeed isn't the one the other end is expecting. */ +#if !APR_CHARSET_EBCDIC +/** linefeed */ +#define LF 10 +/** carrige return */ +#define CR 13 +/** carrige return /Line Feed Combo */ +#define CRLF "\015\012" +#else /* APR_CHARSET_EBCDIC */ +/* For platforms using the EBCDIC charset, the transition ASCII->EBCDIC is done + * in the buff package (bread/bputs/bwrite). Everywhere else, we use + * "native EBCDIC" CR and NL characters. These are therefore + * defined as + * '\r' and '\n'. + */ +#define CR '\r' +#define LF '\n' +#define CRLF "\r\n" +#endif /* APR_CHARSET_EBCDIC */ + +/** + * @defgroup values_request_rec_body Possible values for request_rec.read_body + * @{ + * Possible values for request_rec.read_body (set by handling module): + */ + +/** Send 413 error if message has any body */ +#define REQUEST_NO_BODY 0 +/** Send 411 error if body without Content-Length */ +#define REQUEST_CHUNKED_ERROR 1 +/** If chunked, remove the chunks for me. */ +#define REQUEST_CHUNKED_DECHUNK 2 +/** @} // values_request_rec_body */ + +/** + * @defgroup values_request_rec_used_path_info Possible values for request_rec.used_path_info + * @ingroup APACHE_CORE_DAEMON + * @{ + * Possible values for request_rec.used_path_info: + */ + +/** Accept the path_info from the request */ +#define AP_REQ_ACCEPT_PATH_INFO 0 +/** Return a 404 error if path_info was given */ +#define AP_REQ_REJECT_PATH_INFO 1 +/** Module may chose to use the given path_info */ +#define AP_REQ_DEFAULT_PATH_INFO 2 + +/** @} // values_request_rec_used_path_info */ + + +/* + * Things which may vary per file-lookup WITHIN a request --- + * e.g., state of MIME config. Basically, the name of an object, info + * about the object, and any other info we may ahve which may need to + * change as we go poking around looking for it (e.g., overridden by + * .htaccess files). + * + * Note how the default state of almost all these things is properly + * zero, so that allocating it with pcalloc does the right thing without + * a whole lot of hairy initialization... so long as we are willing to + * make the (fairly) portable assumption that the bit pattern of a NULL + * pointer is, in fact, zero. + */ + +/** + * @brief This represents the result of calling htaccess; these are cached for + * each request. + */ +struct htaccess_result { + /** the directory to which this applies */ + const char *dir; + /** the overrides allowed for the .htaccess file */ + int override; + /** the override options allowed for the .htaccess file */ + int override_opts; + /** the configuration directives */ + struct ap_conf_vector_t *htaccess; + /** the next one, or NULL if no more; N.B. never change this */ + const struct htaccess_result *next; +}; + +/* The following four types define a hierarchy of activities, so that + * given a request_rec r you can write r->connection->server->process + * to get to the process_rec. While this reduces substantially the + * number of arguments that various hooks require beware that in + * threaded versions of the server you must consider multiplexing + * issues. */ + + +/** A structure that represents one process */ +typedef struct process_rec process_rec; +/** A structure that represents a virtual server */ +typedef struct server_rec server_rec; +/** A structure that represents one connection */ +typedef struct conn_rec conn_rec; +/** A structure that represents the current request */ +typedef struct request_rec request_rec; +/** A structure that represents the status of the current connection */ +typedef struct conn_state_t conn_state_t; + +/* ### would be nice to not include this from httpd.h ... */ +/* This comes after we have defined the request_rec type */ +#include "apr_uri.h" + +/** + * @brief A structure that represents one process + */ +struct process_rec { + /** Global pool. Cleared upon normal exit */ + apr_pool_t *pool; + /** Configuration pool. Cleared upon restart */ + apr_pool_t *pconf; + /** Number of command line arguments passed to the program */ + int argc; + /** The command line arguments */ + const char * const *argv; + /** The program name used to execute the program */ + const char *short_name; +}; + +/** + * @brief A structure that represents the current request + */ +struct request_rec { + /** The pool associated with the request */ + apr_pool_t *pool; + /** The connection to the client */ + conn_rec *connection; + /** The virtual host for this request */ + server_rec *server; + + /** Pointer to the redirected request if this is an external redirect */ + request_rec *next; + /** Pointer to the previous request if this is an internal redirect */ + request_rec *prev; + + /** Pointer to the main request if this is a sub-request + * (see http_request.h) */ + request_rec *main; + + /* Info about the request itself... we begin with stuff that only + * protocol.c should ever touch... + */ + /** First line of request */ + char *the_request; + /** HTTP/0.9, "simple" request (e.g. GET /foo\n w/no headers) */ + int assbackwards; + /** A proxy request (calculated during post_read_request/translate_name) + * possible values PROXYREQ_NONE, PROXYREQ_PROXY, PROXYREQ_REVERSE, + * PROXYREQ_RESPONSE + */ + int proxyreq; + /** HEAD request, as opposed to GET */ + int header_only; + /** Protocol string, as given to us, or HTTP/0.9 */ + char *protocol; + /** Protocol version number of protocol; 1.1 = 1001 */ + int proto_num; + /** Host, as set by full URI or Host: */ + const char *hostname; + + /** Time when the request started */ + apr_time_t request_time; + + /** Status line, if set by script */ + const char *status_line; + /** Status line */ + int status; + + /* Request method, two ways; also, protocol, etc.. Outside of protocol.c, + * look, but don't touch. + */ + + /** Request method (eg. GET, HEAD, POST, etc.) */ + const char *method; + /** M_GET, M_POST, etc. */ + int method_number; + + /** + * 'allowed' is a bitvector of the allowed methods. + * + * A handler must ensure that the request method is one that + * it is capable of handling. Generally modules should DECLINE + * any request methods they do not handle. Prior to aborting the + * handler like this the handler should set r->allowed to the list + * of methods that it is willing to handle. This bitvector is used + * to construct the "Allow:" header required for OPTIONS requests, + * and HTTP_METHOD_NOT_ALLOWED and HTTP_NOT_IMPLEMENTED status codes. + * + * Since the default_handler deals with OPTIONS, all modules can + * usually decline to deal with OPTIONS. TRACE is always allowed, + * modules don't need to set it explicitly. + * + * Since the default_handler will always handle a GET, a + * module which does *not* implement GET should probably return + * HTTP_METHOD_NOT_ALLOWED. Unfortunately this means that a Script GET + * handler can't be installed by mod_actions. + */ + apr_int64_t allowed; + /** Array of extension methods */ + apr_array_header_t *allowed_xmethods; + /** List of allowed methods */ + ap_method_list_t *allowed_methods; + + /** byte count in stream is for body */ + apr_off_t sent_bodyct; + /** body byte count, for easy access */ + apr_off_t bytes_sent; + /** Last modified time of the requested resource */ + apr_time_t mtime; + + /* HTTP/1.1 connection-level features */ + + /** sending chunked transfer-coding */ + int chunked; + /** The Range: header */ + const char *range; + /** The "real" content length */ + apr_off_t clength; + + /** Remaining bytes left to read from the request body */ + apr_off_t remaining; + /** Number of bytes that have been read from the request body */ + apr_off_t read_length; + /** Method for reading the request body + * (eg. REQUEST_CHUNKED_ERROR, REQUEST_NO_BODY, + * REQUEST_CHUNKED_DECHUNK, etc...) */ + int read_body; + /** reading chunked transfer-coding */ + int read_chunked; + /** is client waiting for a 100 response? */ + unsigned expecting_100; + + /* MIME header environments, in and out. Also, an array containing + * environment variables to be passed to subprocesses, so people can + * write modules to add to that environment. + * + * The difference between headers_out and err_headers_out is that the + * latter are printed even on error, and persist across internal redirects + * (so the headers printed for ErrorDocument handlers will have them). + * + * The 'notes' apr_table_t is for notes from one module to another, with no + * other set purpose in mind... + */ + + /** MIME header environment from the request */ + apr_table_t *headers_in; + /** MIME header environment for the response */ + apr_table_t *headers_out; + /** MIME header environment for the response, printed even on errors and + * persist across internal redirects */ + apr_table_t *err_headers_out; + /** Array of environment variables to be used for sub processes */ + apr_table_t *subprocess_env; + /** Notes from one module to another */ + apr_table_t *notes; + + /* content_type, handler, content_encoding, and all content_languages + * MUST be lowercased strings. They may be pointers to static strings; + * they should not be modified in place. + */ + /** The content-type for the current request */ + const char *content_type; /* Break these out --- we dispatch on 'em */ + /** The handler string that we use to call a handler function */ + const char *handler; /* What we *really* dispatch on */ + + /** How to encode the data */ + const char *content_encoding; + /** Array of strings representing the content languages */ + apr_array_header_t *content_languages; + + /** variant list validator (if negotiated) */ + char *vlist_validator; + + /** If an authentication check was made, this gets set to the user name. */ + char *user; + /** If an authentication check was made, this gets set to the auth type. */ + char *ap_auth_type; + + /** This response can not be cached */ + int no_cache; + /** There is no local copy of this response */ + int no_local_copy; + + /* What object is being requested (either directly, or via include + * or content-negotiation mapping). + */ + + /** The URI without any parsing performed */ + char *unparsed_uri; + /** The path portion of the URI */ + char *uri; + /** The filename on disk corresponding to this response */ + char *filename; + /* XXX: What does this mean? Please define "canonicalize" -aaron */ + /** The true filename, we canonicalize r->filename if these don't match */ + char *canonical_filename; + /** The PATH_INFO extracted from this request */ + char *path_info; + /** The QUERY_ARGS extracted from this request */ + char *args; + /** finfo.protection (st_mode) set to zero if no such file */ + apr_finfo_t finfo; + /** A struct containing the components of URI */ + apr_uri_t parsed_uri; + + /** + * Flag for the handler to accept or reject path_info on + * the current request. All modules should respect the + * AP_REQ_ACCEPT_PATH_INFO and AP_REQ_REJECT_PATH_INFO + * values, while AP_REQ_DEFAULT_PATH_INFO indicates they + * may follow existing conventions. This is set to the + * user's preference upon HOOK_VERY_FIRST of the fixups. + */ + int used_path_info; + + /* Various other config info which may change with .htaccess files + * These are config vectors, with one void* pointer for each module + * (the thing pointed to being the module's business). + */ + + /** Options set in config files, etc. */ + struct ap_conf_vector_t *per_dir_config; + /** Notes on *this* request */ + struct ap_conf_vector_t *request_config; + + /** + * A linked list of the .htaccess configuration directives + * accessed by this request. + * N.B. always add to the head of the list, _never_ to the end. + * that way, a sub request's list can (temporarily) point to a parent's list + */ + const struct htaccess_result *htaccess; + + /** A list of output filters to be used for this request */ + struct ap_filter_t *output_filters; + /** A list of input filters to be used for this request */ + struct ap_filter_t *input_filters; + + /** A list of protocol level output filters to be used for this + * request */ + struct ap_filter_t *proto_output_filters; + /** A list of protocol level input filters to be used for this + * request */ + struct ap_filter_t *proto_input_filters; + + /** A flag to determine if the eos bucket has been sent yet */ + int eos_sent; + +/* Things placed at the end of the record to avoid breaking binary + * compatibility. It would be nice to remember to reorder the entire + * record to improve 64bit alignment the next time we need to break + * binary compatibility for some other reason. + */ +}; + +/** + * @defgroup ProxyReq Proxy request types + * + * Possible values of request_rec->proxyreq. A request could be normal, + * proxied or reverse proxied. Normally proxied and reverse proxied are + * grouped together as just "proxied", but sometimes it's necessary to + * tell the difference between the two, such as for authentication. + * @{ + */ + +#define PROXYREQ_NONE 0 /**< No proxy */ +#define PROXYREQ_PROXY 1 /**< Standard proxy */ +#define PROXYREQ_REVERSE 2 /**< Reverse proxy */ +#define PROXYREQ_RESPONSE 3 /**< Origin response */ + +/* @} */ + +/** + * @brief Enumeration of connection keepalive options + */ +typedef enum { + AP_CONN_UNKNOWN, + AP_CONN_CLOSE, + AP_CONN_KEEPALIVE +} ap_conn_keepalive_e; + +/** + * @brief Structure to store things which are per connection + */ +struct conn_rec { + /** Pool associated with this connection */ + apr_pool_t *pool; + /** Physical vhost this conn came in on */ + server_rec *base_server; + /** used by http_vhost.c */ + void *vhost_lookup_data; + + /* Information about the connection itself */ + /** local address */ + apr_sockaddr_t *local_addr; + /** remote address */ + apr_sockaddr_t *remote_addr; + + /** Client's IP address */ + char *remote_ip; + /** Client's DNS name, if known. NULL if DNS hasn't been checked, + * "" if it has and no address was found. N.B. Only access this though + * get_remote_host() */ + char *remote_host; + /** Only ever set if doing rfc1413 lookups. N.B. Only access this through + * get_remote_logname() */ + char *remote_logname; + + /** Are we still talking? */ + unsigned aborted:1; + + /** Are we going to keep the connection alive for another request? + * @see ap_conn_keepalive_e */ + ap_conn_keepalive_e keepalive; + + /** have we done double-reverse DNS? -1 yes/failure, 0 not yet, + * 1 yes/success */ + signed int double_reverse:2; + + /** How many times have we used it? */ + int keepalives; + /** server IP address */ + char *local_ip; + /** used for ap_get_server_name when UseCanonicalName is set to DNS + * (ignores setting of HostnameLookups) */ + char *local_host; + + /** ID of this connection; unique at any point in time */ + long id; + /** Config vector containing pointers to connections per-server + * config structures. */ + struct ap_conf_vector_t *conn_config; + /** Notes on *this* connection: send note from one module to + * another. must remain valid for all requests on this conn */ + apr_table_t *notes; + /** A list of input filters to be used for this connection */ + struct ap_filter_t *input_filters; + /** A list of output filters to be used for this connection */ + struct ap_filter_t *output_filters; + /** handle to scoreboard information for this connection */ + void *sbh; + /** The bucket allocator to use for all bucket/brigade creations */ + struct apr_bucket_alloc_t *bucket_alloc; + /** The current state of this connection */ + conn_state_t *cs; + /** Is there data pending in the input filters? */ + int data_in_input_filters; +}; + +/** + * Enumeration of connection states + */ +typedef enum { + CONN_STATE_CHECK_REQUEST_LINE_READABLE, + CONN_STATE_READ_REQUEST_LINE, + CONN_STATE_LINGER +} conn_state_e; + +/** + * @brief A structure to contain connection state information + */ +struct conn_state_t { + /** APR_RING of expiration timeouts */ + APR_RING_ENTRY(conn_state_t) timeout_list; + /** the expiration time of the next keepalive timeout */ + apr_time_t expiration_time; + /** Current state of the connection */ + conn_state_e state; + /** connection record this struct refers to */ + conn_rec *c; + /** memory pool to allocate from */ + apr_pool_t *p; + /** bucket allocator */ + apr_bucket_alloc_t *bucket_alloc; + /** poll file decriptor information */ + apr_pollfd_t pfd; +}; + +/* Per-vhost config... */ + +/** + * The address 255.255.255.255, when used as a virtualhost address, + * will become the "default" server when the ip doesn't match other vhosts. + */ +#define DEFAULT_VHOST_ADDR 0xfffffffful + + +/** + * @struct server_addr_rec + * @brief A structure to be used for Per-vhost config + */ +typedef struct server_addr_rec server_addr_rec; +struct server_addr_rec { + /** The next server in the list */ + server_addr_rec *next; + /** The bound address, for this server */ + apr_sockaddr_t *host_addr; + /** The bound port, for this server */ + apr_port_t host_port; + /** The name given in "" */ + char *virthost; +}; + +/** + * @brief A structure to store information for each virtual server + */ +struct server_rec { + /** The process this server is running in */ + process_rec *process; + /** The next server in the list */ + server_rec *next; + + /** The name of the server */ + const char *defn_name; + /** The line of the config file that the server was defined on */ + unsigned defn_line_number; + + /* Contact information */ + + /** The admin's contact information */ + char *server_admin; + /** The server hostname */ + char *server_hostname; + /** for redirects, etc. */ + apr_port_t port; + + /* Log files --- note that transfer log is now in the modules... */ + + /** The name of the error log */ + char *error_fname; + /** A file descriptor that references the error log */ + apr_file_t *error_log; + /** The log level for this server */ + int loglevel; + + /* Module-specific configuration for server, and defaults... */ + + /** true if this is the virtual server */ + int is_virtual; + /** Config vector containing pointers to modules' per-server config + * structures. */ + struct ap_conf_vector_t *module_config; + /** MIME type info, etc., before we start checking per-directory info */ + struct ap_conf_vector_t *lookup_defaults; + + /* Transaction handling */ + + /** I haven't got a clue */ + server_addr_rec *addrs; + /** Timeout, as an apr interval, before we give up */ + apr_interval_time_t timeout; + /** The apr interval we will wait for another request */ + apr_interval_time_t keep_alive_timeout; + /** Maximum requests per connection */ + int keep_alive_max; + /** Use persistent connections? */ + int keep_alive; + + /** Pathname for ServerPath */ + const char *path; + /** Length of path */ + int pathlen; + + /** Normal names for ServerAlias servers */ + apr_array_header_t *names; + /** Wildcarded names for ServerAlias servers */ + apr_array_header_t *wild_names; + + /** limit on size of the HTTP request line */ + int limit_req_line; + /** limit on size of any request header field */ + int limit_req_fieldsize; + /** limit on number of request header fields */ + int limit_req_fields; + + /** The server request scheme for redirect responses */ + const char *server_scheme; +}; + +typedef struct core_output_filter_ctx { + apr_bucket_brigade *b; + /** subpool of c->pool used for resources + * which may outlive the request + */ + apr_pool_t *deferred_write_pool; +} core_output_filter_ctx_t; + +typedef struct core_filter_ctx { + apr_bucket_brigade *b; + apr_bucket_brigade *tmpbb; +} core_ctx_t; + +typedef struct core_net_rec { + /** Connection to the client */ + apr_socket_t *client_socket; + + /** connection record */ + conn_rec *c; + + core_output_filter_ctx_t *out_ctx; + core_ctx_t *in_ctx; +} core_net_rec; + +/** + * Examine a field value (such as a media-/content-type) string and return + * it sans any parameters; e.g., strip off any ';charset=foo' and the like. + * @param p Pool to allocate memory from + * @param intype The field to examine + * @return A copy of the field minus any parameters + */ +AP_DECLARE(char *) ap_field_noparam(apr_pool_t *p, const char *intype); + +/** + * Convert a time from an integer into a string in a specified format + * @param p The pool to allocate memory from + * @param t The time to convert + * @param fmt The format to use for the conversion + * @param gmt Convert the time for GMT? + * @return The string that represents the specified time + */ +AP_DECLARE(char *) ap_ht_time(apr_pool_t *p, apr_time_t t, const char *fmt, int gmt); + +/* String handling. The *_nc variants allow you to use non-const char **s as + arguments (unfortunately C won't automatically convert a char ** to a const + char **) */ + +/** + * Get the characters until the first occurance of a specified character + * @param p The pool to allocate memory from + * @param line The string to get the characters from + * @param stop The character to stop at + * @return A copy of the characters up to the first stop character + */ +AP_DECLARE(char *) ap_getword(apr_pool_t *p, const char **line, char stop); + +/** + * Get the characters until the first occurance of a specified character + * @param p The pool to allocate memory from + * @param line The string to get the characters from + * @param stop The character to stop at + * @return A copy of the characters up to the first stop character + * @note This is the same as ap_getword(), except it doesn't use const char **. + */ +AP_DECLARE(char *) ap_getword_nc(apr_pool_t *p, char **line, char stop); + +/** + * Get the first word from a given string. A word is defined as all characters + * up to the first whitespace. + * @param p The pool to allocate memory from + * @param line The string to traverse + * @return The first word in the line + */ +AP_DECLARE(char *) ap_getword_white(apr_pool_t *p, const char **line); + +/** + * Get the first word from a given string. A word is defined as all characters + * up to the first whitespace. + * @param p The pool to allocate memory from + * @param line The string to traverse + * @return The first word in the line + * @note The same as ap_getword_white(), except it doesn't use const char** + */ +AP_DECLARE(char *) ap_getword_white_nc(apr_pool_t *p, char **line); + +/** + * Get all characters from the first occurance of @a stop to the first "\0" + * @param p The pool to allocate memory from + * @param line The line to traverse + * @param stop The character to start at + * @return A copy of all caracters after the first occurance of the specified + * character + */ +AP_DECLARE(char *) ap_getword_nulls(apr_pool_t *p, const char **line, + char stop); + +/** + * Get all characters from the first occurance of @a stop to the first "\0" + * @param p The pool to allocate memory from + * @param line The line to traverse + * @param stop The character to start at + * @return A copy of all caracters after the first occurance of the specified + * character + * @note The same as ap_getword_nulls(), except it doesn't use const char **. + */ +AP_DECLARE(char *) ap_getword_nulls_nc(apr_pool_t *p, char **line, char stop); + +/** + * Get the second word in the string paying attention to quoting + * @param p The pool to allocate from + * @param line The line to traverse + * @return A copy of the string + */ +AP_DECLARE(char *) ap_getword_conf(apr_pool_t *p, const char **line); + +/** + * Get the second word in the string paying attention to quoting + * @param p The pool to allocate from + * @param line The line to traverse + * @return A copy of the string + * @note The same as ap_getword_conf(), except it doesn't use const char **. + */ +AP_DECLARE(char *) ap_getword_conf_nc(apr_pool_t *p, char **line); + +/** + * Check a string for any ${ENV} environment variable construct and replace + * each them by the value of that environment variable, if it exists. If the + * environment value does not exist, leave the ${ENV} construct alone; it + * means something else. + * @param p The pool to allocate from + * @param word The string to check + * @return The string with the replaced environment variables + */ +AP_DECLARE(const char *) ap_resolve_env(apr_pool_t *p, const char * word); + +/** + * Size an HTTP header field list item, as separated by a comma. + * @param field The field to size + * @param len The length of the field + * @return The return value is a pointer to the beginning of the non-empty + * list item within the original string (or NULL if there is none) and the + * address of field is shifted to the next non-comma, non-whitespace + * character. len is the length of the item excluding any beginning whitespace. + */ +AP_DECLARE(const char *) ap_size_list_item(const char **field, int *len); + +/** + * Retrieve an HTTP header field list item, as separated by a comma, + * while stripping insignificant whitespace and lowercasing anything not in + * a quoted string or comment. + * @param p The pool to allocate from + * @param field The field to retrieve + * @return The return value is a new string containing the converted list + * item (or NULL if none) and the address pointed to by field is + * shifted to the next non-comma, non-whitespace. + */ +AP_DECLARE(char *) ap_get_list_item(apr_pool_t *p, const char **field); + +/** + * Find an item in canonical form (lowercase, no extra spaces) within + * an HTTP field value list. + * @param p The pool to allocate from + * @param line The field value list to search + * @param tok The token to search for + * @return 1 if found, 0 if not found. + */ +AP_DECLARE(int) ap_find_list_item(apr_pool_t *p, const char *line, const char *tok); + +/** + * Retrieve a token, spacing over it and adjusting the pointer to + * the first non-white byte afterwards. Note that these tokens + * are delimited by semis and commas and can also be delimited + * by whitespace at the caller's option. + * @param p The pool to allocate from + * @param accept_line The line to retrieve the token from (adjusted afterwards) + * @param accept_white Is it delimited by whitespace + * @return the token + */ +AP_DECLARE(char *) ap_get_token(apr_pool_t *p, const char **accept_line, int accept_white); + +/** + * Find http tokens, see the definition of token from RFC2068 + * @param p The pool to allocate from + * @param line The line to find the token + * @param tok The token to find + * @return 1 if the token is found, 0 otherwise + */ +AP_DECLARE(int) ap_find_token(apr_pool_t *p, const char *line, const char *tok); + +/** + * find http tokens from the end of the line + * @param p The pool to allocate from + * @param line The line to find the token + * @param tok The token to find + * @return 1 if the token is found, 0 otherwise + */ +AP_DECLARE(int) ap_find_last_token(apr_pool_t *p, const char *line, const char *tok); + +/** + * Check for an Absolute URI syntax + * @param u The string to check + * @return 1 if URI, 0 otherwise + */ +AP_DECLARE(int) ap_is_url(const char *u); + +/** + * Unescape a URL + * @param url The url to unescape + * @return 0 on success, non-zero otherwise + */ +AP_DECLARE(int) ap_unescape_url(char *url); + +/** + * Unescape a URL, but leaving %2f (slashes) escaped + * @param url The url to unescape + * @return 0 on success, non-zero otherwise + */ +AP_DECLARE(int) ap_unescape_url_keep2f(char *url); + +/** + * Convert all double slashes to single slashes + * @param name The string to convert + */ +AP_DECLARE(void) ap_no2slash(char *name); + +/** + * Remove all ./ and xx/../ substrings from a file name. Also remove + * any leading ../ or /../ substrings. + * @param name the file name to parse + */ +AP_DECLARE(void) ap_getparents(char *name); + +/** + * Escape a path segment, as defined in RFC 1808 + * @param p The pool to allocate from + * @param s The path to convert + * @return The converted URL + */ +AP_DECLARE(char *) ap_escape_path_segment(apr_pool_t *p, const char *s); + +/** + * convert an OS path to a URL in an OS dependant way. + * @param p The pool to allocate from + * @param path The path to convert + * @param partial if set, assume that the path will be appended to something + * with a '/' in it (and thus does not prefix "./") + * @return The converted URL + */ +AP_DECLARE(char *) ap_os_escape_path(apr_pool_t *p, const char *path, int partial); + +/** @see ap_os_escape_path */ +#define ap_escape_uri(ppool,path) ap_os_escape_path(ppool,path,1) + +/** + * Escape an html string + * @param p The pool to allocate from + * @param s The html to escape + * @return The escaped string + */ +AP_DECLARE(char *) ap_escape_html(apr_pool_t *p, const char *s); + +/** + * Escape a string for logging + * @param p The pool to allocate from + * @param str The string to escape + * @return The escaped string + */ +AP_DECLARE(char *) ap_escape_logitem(apr_pool_t *p, const char *str); + +/** + * Escape a string for logging into the error log (without a pool) + * @param dest The buffer to write to + * @param source The string to escape + * @param buflen The buffer size for the escaped string (including "\0") + * @return The len of the escaped string (always < maxlen) + */ +AP_DECLARE(apr_size_t) ap_escape_errorlog_item(char *dest, const char *source, + apr_size_t buflen); + +/** + * Construct a full hostname + * @param p The pool to allocate from + * @param hostname The hostname of the server + * @param port The port the server is running on + * @param r The current request + * @return The server's hostname + */ +AP_DECLARE(char *) ap_construct_server(apr_pool_t *p, const char *hostname, + apr_port_t port, const request_rec *r); + +/** + * Escape a shell command + * @param p The pool to allocate from + * @param s The command to escape + * @return The escaped shell command + */ +AP_DECLARE(char *) ap_escape_shell_cmd(apr_pool_t *p, const char *s); + +/** + * Count the number of directories in a path + * @param path The path to count + * @return The number of directories + */ +AP_DECLARE(int) ap_count_dirs(const char *path); + +/** + * Copy at most @a n leading directories of @a s into @a d. @a d + * should be at least as large as @a s plus 1 extra byte + * + * @param d The location to copy to + * @param s The location to copy from + * @param n The number of directories to copy + * @return value is the ever useful pointer to the trailing "\0" of d + * @note on platforms with drive letters, n = 0 returns the "/" root, + * whereas n = 1 returns the "d:/" root. On all other platforms, n = 0 + * returns the empty string. */ +AP_DECLARE(char *) ap_make_dirstr_prefix(char *d, const char *s, int n); + +/** + * Return the parent directory name (including trailing /) of the file + * @a s + * @param p The pool to allocate from + * @param s The file to get the parent of + * @return A copy of the file's parent directory + */ +AP_DECLARE(char *) ap_make_dirstr_parent(apr_pool_t *p, const char *s); + +/** + * Given a directory and filename, create a single path from them. This + * function is smart enough to ensure that there is a sinlge '/' between the + * directory and file names + * @param a The pool to allocate from + * @param dir The directory name + * @param f The filename + * @return A copy of the full path + * @note Never consider using this function if you are dealing with filesystem + * names that need to remain canonical, unless you are merging an apr_dir_read + * path and returned filename. Otherwise, the result is not canonical. + */ +AP_DECLARE(char *) ap_make_full_path(apr_pool_t *a, const char *dir, const char *f); + +/** + * Test if the given path has an an absolute path. + * @param p The pool to allocate from + * @param dir The directory name + * @note The converse is not necessarily true, some OS's (Win32/OS2/Netware) have + * multiple forms of absolute paths. This only reports if the path is absolute + * in a canonical sense. + */ +AP_DECLARE(int) ap_os_is_path_absolute(apr_pool_t *p, const char *dir); + +/** + * Does the provided string contain wildcard characters? This is useful + * for determining if the string should be passed to strcmp_match or to strcmp. + * The only wildcard characters recognized are '?' and '*' + * @param str The string to check + * @return 1 if the string has wildcards, 0 otherwise + */ +AP_DECLARE(int) ap_is_matchexp(const char *str); + +/** + * Determine if a string matches a patterm containing the wildcards '?' or '*' + * @param str The string to check + * @param expected The pattern to match against + * @return 1 if the two strings match, 0 otherwise + */ +AP_DECLARE(int) ap_strcmp_match(const char *str, const char *expected); + +/** + * Determine if a string matches a patterm containing the wildcards '?' or '*', + * ignoring case + * @param str The string to check + * @param expected The pattern to match against + * @return 1 if the two strings match, 0 otherwise + */ +AP_DECLARE(int) ap_strcasecmp_match(const char *str, const char *expected); + +/** + * Find the first occurrence of the substring s2 in s1, regardless of case + * @param s1 The string to search + * @param s2 The substring to search for + * @return A pointer to the beginning of the substring + * @remark See apr_strmatch() for a faster alternative + */ +AP_DECLARE(char *) ap_strcasestr(const char *s1, const char *s2); + +/** + * Return a pointer to the location inside of bigstring immediately after prefix + * @param bigstring The input string + * @param prefix The prefix to strip away + * @return A pointer relative to bigstring after prefix + */ +AP_DECLARE(const char *) ap_stripprefix(const char *bigstring, + const char *prefix); + +/** + * Decode a base64 encoded string into memory allocated from a pool + * @param p The pool to allocate from + * @param bufcoded The encoded string + * @return The decoded string + */ +AP_DECLARE(char *) ap_pbase64decode(apr_pool_t *p, const char *bufcoded); + +/** + * Encode a string into memory allocated from a pool in base 64 format + * @param p The pool to allocate from + * @param string The plaintext string + * @return The encoded string + */ +AP_DECLARE(char *) ap_pbase64encode(apr_pool_t *p, char *string); + +/** + * Compile a regular expression to be used later + * @param p The pool to allocate from + * @param pattern the regular expression to compile + * @param cflags The bitwise or of one or more of the following: + * @li REG_EXTENDED - Use POSIX extended Regular Expressions + * @li REG_ICASE - Ignore case + * @li REG_NOSUB - Support for substring addressing of matches + * not required + * @li REG_NEWLINE - Match-any-character operators don't match new-line + * @return The compiled regular expression + */ +AP_DECLARE(ap_regex_t *) ap_pregcomp(apr_pool_t *p, const char *pattern, + int cflags); + +/** + * Free the memory associated with a compiled regular expression + * @param p The pool the regex was allocated from + * @param reg The regular expression to free + */ +AP_DECLARE(void) ap_pregfree(apr_pool_t *p, ap_regex_t *reg); + +/** + * After performing a successful regex match, you may use this function to + * perform a series of string substitutions based on subexpressions that were + * matched during the call to ap_regexec + * @param p The pool to allocate from + * @param input An arbitrary string containing $1 through $9. These are + * replaced with the corresponding matched sub-expressions + * @param source The string that was originally matched to the regex + * @param nmatch the nmatch returned from ap_pregex + * @param pmatch the pmatch array returned from ap_pregex + */ +AP_DECLARE(char *) ap_pregsub(apr_pool_t *p, const char *input, const char *source, + size_t nmatch, ap_regmatch_t pmatch[]); + +/** + * We want to downcase the type/subtype for comparison purposes + * but nothing else because ;parameter=foo values are case sensitive. + * @param s The content-type to convert to lowercase + */ +AP_DECLARE(void) ap_content_type_tolower(char *s); + +/** + * convert a string to all lowercase + * @param s The string to convert to lowercase + */ +AP_DECLARE(void) ap_str_tolower(char *s); + +/** + * Search a string from left to right for the first occurrence of a + * specific character + * @param str The string to search + * @param c The character to search for + * @return The index of the first occurrence of c in str + */ +AP_DECLARE(int) ap_ind(const char *str, char c); /* Sigh... */ + +/** + * Search a string from right to left for the first occurrence of a + * specific character + * @param str The string to search + * @param c The character to search for + * @return The index of the first occurrence of c in str + */ +AP_DECLARE(int) ap_rind(const char *str, char c); + +/** + * Given a string, replace any bare " with \" . + * @param p The pool to allocate memory from + * @param instring The string to search for " + * @return A copy of the string with escaped quotes + */ +AP_DECLARE(char *) ap_escape_quotes(apr_pool_t *p, const char *instring); + +/** + * Given a string, append the PID deliminated by delim. + * Usually used to create a pid-appended filepath name + * (eg: /a/b/foo -> /a/b/foo.6726). A function, and not + * a macro, to avoid unistd.h dependency + * @param p The pool to allocate memory from + * @param string The string to append the PID to + * @param delim The string to use to deliminate the string from the PID + * @return A copy of the string with the PID appended + */ +AP_DECLARE(char *) ap_append_pid(apr_pool_t *p, const char *string, + const char *delim); + +/* Misc system hackery */ +/** + * Given the name of an object in the file system determine if it is a directory + * @param p The pool to allocate from + * @param name The name of the object to check + * @return 1 if it is a directory, 0 otherwise + */ +AP_DECLARE(int) ap_is_rdirectory(apr_pool_t *p, const char *name); + +/** + * Given the name of an object in the file system determine if it is a directory - this version is symlink aware + * @param p The pool to allocate from + * @param name The name of the object to check + * @return 1 if it is a directory, 0 otherwise + */ +AP_DECLARE(int) ap_is_directory(apr_pool_t *p, const char *name); + +#ifdef _OSD_POSIX +extern int os_init_job_environment(server_rec *s, const char *user_name, int one_process); +#endif /* _OSD_POSIX */ + +/** + * Determine the local host name for the current machine + * @param p The pool to allocate from + * @return A copy of the local host name + */ +char *ap_get_local_host(apr_pool_t *p); + +/** + * Log an assertion to the error log + * @param szExp The assertion that failed + * @param szFile The file the assertion is in + * @param nLine The line the assertion is defined on + */ +AP_DECLARE(void) ap_log_assert(const char *szExp, const char *szFile, int nLine) + __attribute__((noreturn)); + +/** + * @internal Internal Assert function + */ +#define ap_assert(exp) ((exp) ? (void)0 : ap_log_assert(#exp,__FILE__,__LINE__)) + +/** + * Redefine assert() to something more useful for an Apache... + * + * Use ap_assert() if the condition should always be checked. + * Use AP_DEBUG_ASSERT() if the condition should only be checked when AP_DEBUG + * is defined. + */ +#ifdef AP_DEBUG +#define AP_DEBUG_ASSERT(exp) ap_assert(exp) +#else +#define AP_DEBUG_ASSERT(exp) ((void)0) +#endif + +/** + * @defgroup stopsignal Flags which indicate places where the sever should stop for debugging. + * @{ + * A set of flags which indicate places where the server should raise(SIGSTOP). + * This is useful for debugging, because you can then attach to that process + * with gdb and continue. This is important in cases where one_process + * debugging isn't possible. + */ +/** stop on a Detach */ +#define SIGSTOP_DETACH 1 +/** stop making a child process */ +#define SIGSTOP_MAKE_CHILD 2 +/** stop spawning a child process */ +#define SIGSTOP_SPAWN_CHILD 4 +/** stop spawning a child process with a piped log */ +#define SIGSTOP_PIPED_LOG_SPAWN 8 +/** stop spawning a CGI child process */ +#define SIGSTOP_CGI_CHILD 16 + +/** Macro to get GDB started */ +#ifdef DEBUG_SIGSTOP +extern int raise_sigstop_flags; +#define RAISE_SIGSTOP(x) do { \ + if (raise_sigstop_flags & SIGSTOP_##x) raise(SIGSTOP);\ + } while (0) +#else +#define RAISE_SIGSTOP(x) +#endif +/** @} */ +/** + * Get HTML describing the address and (optionally) admin of the server. + * @param prefix Text which is prepended to the return value + * @param r The request_rec + * @return HTML describing the server, allocated in @a r's pool. + */ +AP_DECLARE(const char *) ap_psignature(const char *prefix, request_rec *r); + +/** strtoul does not exist on sunos4. */ +#ifdef strtoul +#undef strtoul +#endif +#define strtoul strtoul_is_not_a_portable_function_use_strtol_instead + + /* The C library has functions that allow const to be silently dropped ... + these macros detect the drop in maintainer mode, but use the native + methods for normal builds + + Note that on some platforms (e.g., AIX with gcc, Solaris with gcc), string.h needs + to be included before the macros are defined or compilation will fail. + */ +#include + +AP_DECLARE(char *) ap_strchr(char *s, int c); +AP_DECLARE(const char *) ap_strchr_c(const char *s, int c); +AP_DECLARE(char *) ap_strrchr(char *s, int c); +AP_DECLARE(const char *) ap_strrchr_c(const char *s, int c); +AP_DECLARE(char *) ap_strstr(char *s, const char *c); +AP_DECLARE(const char *) ap_strstr_c(const char *s, const char *c); + +#ifdef AP_DEBUG + +#undef strchr +# define strchr(s, c) ap_strchr(s,c) +#undef strrchr +# define strrchr(s, c) ap_strrchr(s,c) +#undef strstr +# define strstr(s, c) ap_strstr(s,c) + +#else + +/** use this instead of strchr */ +# define ap_strchr(s, c) strchr(s, c) +/** use this instead of strchr */ +# define ap_strchr_c(s, c) strchr(s, c) +/** use this instead of strrchr */ +# define ap_strrchr(s, c) strrchr(s, c) +/** use this instead of strrchr */ +# define ap_strrchr_c(s, c) strrchr(s, c) +/** use this instead of strrstr*/ +# define ap_strstr(s, c) strstr(s, c) +/** use this instead of strrstr*/ +# define ap_strstr_c(s, c) strstr(s, c) + +#endif + +#define AP_NORESTART APR_OS_START_USEERR + 1 + +#ifdef __cplusplus +} +#endif + +#endif /* !APACHE_HTTPD_H */ + +/** @} //APACHE Daemon */ +/** @} //APACHE Core */ +/** @} //APACHE super group */ + -- cgit v1.2.3