diff options
Diffstat (limited to 'mibs/UCD-SNMP-MIB.txt')
| -rw-r--r-- | mibs/UCD-SNMP-MIB.txt | 1768 |
1 files changed, 1768 insertions, 0 deletions
diff --git a/mibs/UCD-SNMP-MIB.txt b/mibs/UCD-SNMP-MIB.txt new file mode 100644 index 0000000..3bf4913 --- /dev/null +++ b/mibs/UCD-SNMP-MIB.txt @@ -0,0 +1,1768 @@ +UCD-SNMP-MIB DEFINITIONS ::= BEGIN + +-- Design notes: +-- +-- The design of this mib may seem unusual in parts, as it was +-- designed for ease of numerical management routines. +-- +-- In that light, most sub-sections of this mib have four common +-- numerical oid consistencies: +-- +-- 2021.ID.1 : an integer index value. In scalers, this is always +-- of value 1. In tables it is a row index. +-- 2021.ID.2 : a name of the script, process, etc. that this row represents. +-- 2021.ID.100 : An error flag indicating if an error is present on +-- that row (a threshold value was crossed, etc). +-- 2021.ID.101 : An error string describing why the error flag is non-0. +-- +-- These conventions enable managers to easy examine portions of the +-- mib by setting the ID to the sub-section they are interested in +-- monitoring, and then scanning the .100 value to check for an +-- error(s), and get a more specific error message from .101 for the +-- named check found in .2. +-- +-- Row numbers between 2 and 100 are sub-section specific. +-- +-- Mib sections utilizing the above conventions: +-- Tables: procTable, execTable, diskTable, loadTable +-- Scalers: memory, snmperrs + + +IMPORTS + OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY, + Integer32, Opaque, enterprises, Counter32, Unsigned32 + FROM SNMPv2-SMI + + TEXTUAL-CONVENTION, DisplayString, TruthValue + FROM SNMPv2-TC; + +ucdavis MODULE-IDENTITY + LAST-UPDATED "200901190000Z" + ORGANIZATION "University of California, Davis" + CONTACT-INFO + "This mib is no longer being maintained by the University of + California and is now in life-support-mode and being + maintained by the net-snmp project. The best place to write + for public questions about the net-snmp-coders mailing list + at net-snmp-coders@lists.sourceforge.net. + + postal: Wes Hardaker + P.O. Box 382 + Davis CA 95617 + + email: net-snmp-coders@lists.sourceforge.net + " + DESCRIPTION + "This file defines the private UCD SNMP MIB extensions." + + REVISION "201105140000Z" + DESCRIPTION + "New objects for monitoring CPU Steal, Guest and Nice values" + + REVISION "200901190000Z" + DESCRIPTION + "New 64-bit objects for monitoring large disk usage" + + REVISION "200611220000Z" + DESCRIPTION + "Clarify behaviour of objects in the memory & systemStats groups + (including updated versions of malnamed mem*Text objects). + Define suitable TCs to describe error reporting/fix behaviour." + + REVISION "200404070000Z" + DESCRIPTION + "Added ssCpuRawSoftIRQ for Linux (2.6) and forgotten raw swap counters." + + REVISION "200209050000Z" + DESCRIPTION + "Deprecate the non-raw objects." + + REVISION "200109200000Z" + DESCRIPTION + "Group to monitor log files" + + REVISION "200101170000Z" + DESCRIPTION + "Added raw CPU and IO counters." + + REVISION "9912090000Z" + DESCRIPTION + "SMIv2 version converted from older MIB definitions." + ::= { enterprises 2021 } + +-- Current UCD core mib table entries: +-- prTable OBJECT IDENTIFIER ::= { ucdavis 2 } +-- memory OBJECT IDENTIFIER ::= { ucdavis 4 } +-- extTable OBJECT IDENTIFIER ::= { ucdavis 8 } +-- diskTable OBJECT IDENTIFIER ::= { ucdavis 9 } +-- loadTable OBJECT IDENTIFIER ::= { ucdavis 10 } +-- systemStats OBJECT IDENTIFIER ::= { ucdavis 11 } +-- ucdDemoMIB OBJECT IDENTIFIER ::= { ucdavis 14 } - UCD-DEMO-MIB +-- fileTable OBJECT IDENTIFIER ::= { ucdavis 15 } +-- logMatch OBJECT IDENTIFIER ::= { ucdavis 16 } +-- version OBJECT IDENTIFIER ::= { ucdavis 100 } +-- snmperrs OBJECT IDENTIFIER ::= { ucdavis 101 } +-- mibRegistryTable OBJECT IDENTIFIER ::= { ucdavis 102 } + +-- Older mib table entries that were changed to new locations above: +-- processes OBJECT IDENTIFIER ::= { ucdavis 1 } +-- exec OBJECT IDENTIFIER ::= { ucdavis 3 } +-- disk OBJECT IDENTIFIER ::= { ucdavis 6 } +-- load OBJECT IDENTIFIER ::= { ucdavis 7 } + +-- Never implemented and removed from the mib: +-- lockd OBJECT IDENTIFIER ::= { ucdavis 5 } + +-- Branches for registering other UCD MIB modules: +ucdInternal OBJECT IDENTIFIER ::= { ucdavis 12 } +ucdExperimental OBJECT IDENTIFIER ::= { ucdavis 13 } + +-- OID values assigned in the ucdExperimental branch: +-- ucdIpFwAccMIB OBJECT IDENTIFIER ::= { ucdExperimental 1 } - UCD-IPFWACC-MIB +-- ucdIpFilter OBJECT IDENTIFIER ::= { ucdExperimental 2 } - UCD-IPFILTER-MIB +-- wavelan OBJECT IDENTIFIER ::= { ucdExperimental 3 } - WL-MIB +-- ucdDlmodMIB OBJECT IDENTIFIER ::= { ucdExperimental 14 } - UCD-DLMOD-MIB +-- ucdDiskIOMIB OBJECT IDENTIFIER ::= { ucdExperimental 15 } - UCD-DISKIO-MIB +-- lmSensors OBJECT IDENTIFIER ::= { ucdExperimental 16 } - LM-SENSORS-MIB + + +-- These are the old returned values of the agent type. +-- originally returned to: .iso.org.dod.internet.mgmt.mib-2.system.sysObjectID.0 +-- Current versions of the agent return an equivalent OID from the netSnmpAgentOIDs +-- tree (defined in NET-SNMP-TC), which includes values for some additional O/Ss + +ucdSnmpAgent OBJECT IDENTIFIER ::= { ucdavis 250 } +hpux9 OBJECT IDENTIFIER ::= { ucdSnmpAgent 1 } +sunos4 OBJECT IDENTIFIER ::= { ucdSnmpAgent 2 } +solaris OBJECT IDENTIFIER ::= { ucdSnmpAgent 3 } +osf OBJECT IDENTIFIER ::= { ucdSnmpAgent 4 } +ultrix OBJECT IDENTIFIER ::= { ucdSnmpAgent 5 } +hpux10 OBJECT IDENTIFIER ::= { ucdSnmpAgent 6 } +netbsd1 OBJECT IDENTIFIER ::= { ucdSnmpAgent 7 } +freebsd OBJECT IDENTIFIER ::= { ucdSnmpAgent 8 } +irix OBJECT IDENTIFIER ::= { ucdSnmpAgent 9 } +linux OBJECT IDENTIFIER ::= { ucdSnmpAgent 10 } +bsdi OBJECT IDENTIFIER ::= { ucdSnmpAgent 11 } +openbsd OBJECT IDENTIFIER ::= { ucdSnmpAgent 12 } +win32 OBJECT IDENTIFIER ::= { ucdSnmpAgent 13 } -- unlucky +hpux11 OBJECT IDENTIFIER ::= { ucdSnmpAgent 14 } +aix OBJECT IDENTIFIER ::= { ucdSnmpAgent 15 } +macosx OBJECT IDENTIFIER ::= { ucdSnmpAgent 16 } +dragonfly OBJECT IDENTIFIER ::= { ucdSnmpAgent 17 } +unknown OBJECT IDENTIFIER ::= { ucdSnmpAgent 255 } + + +-- +-- Define the Float Textual Convention +-- This definition was written by David Perkins. +-- + +Float ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A single precision floating-point number. The semantics + and encoding are identical for type 'single' defined in + IEEE Standard for Binary Floating-Point, + ANSI/IEEE Std 754-1985. + The value is restricted to the BER serialization of + the following ASN.1 type: + FLOATTYPE ::= [120] IMPLICIT FloatType + (note: the value 120 is the sum of '30'h and '48'h) + The BER serialization of the length for values of + this type must use the definite length, short + encoding form. + + For example, the BER serialization of value 123 + of type FLOATTYPE is '9f780442f60000'h. (The tag + is '9f78'h; the length is '04'h; and the value is + '42f60000'h.) The BER serialization of value + '9f780442f60000'h of data type Opaque is + '44079f780442f60000'h. (The tag is '44'h; the length + is '07'h; and the value is '9f780442f60000'h." + SYNTAX Opaque (SIZE (7)) + +UCDErrorFlag ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Represents a possible error condition" + SYNTAX INTEGER { noError(0), error(1) } + +UCDErrorFix ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Represents a 'push-button' object, to invoke a suitable + configured action. Will always return 0 when read." + SYNTAX INTEGER { noError(0), runFix(1) } + +-- +-- Process table checks +-- + +prTable OBJECT-TYPE + SYNTAX SEQUENCE OF PrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table containing information on running + programs/daemons configured for monitoring in the + snmpd.conf file of the agent. Processes violating the + number of running processes required by the agent's + configuration file are flagged with numerical and + textual errors." + ::= { ucdavis 2 } + +prEntry OBJECT-TYPE + SYNTAX PrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing a process and its statistics." + INDEX { prIndex } + ::= { prTable 1 } + +PrEntry ::= SEQUENCE { + prIndex Integer32, + prNames DisplayString, + prMin Integer32, + prMax Integer32, + prCount Integer32, + prErrorFlag UCDErrorFlag, + prErrMessage DisplayString, + prErrFix UCDErrorFix, + prErrFixCmd DisplayString +} + +prIndex OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Reference Index for each observed process." + ::= { prEntry 1 } + +prNames OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The process name we're counting/checking on." + ::= { prEntry 2 } + +prMin OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum number of processes that should be + running. An error flag is generated if the number of + running processes is < the minimum." + ::= { prEntry 3 } + +prMax OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum number of processes that should be + running. An error flag is generated if the number of + running processes is > the maximum." + ::= { prEntry 4 } + +prCount OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of current processes running with the name + in question." + ::= { prEntry 5 } + +prErrorFlag OBJECT-TYPE + SYNTAX UCDErrorFlag + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A Error flag to indicate trouble with a process. It + goes to 1 if there is an error, 0 if no error." + ::= { prEntry 100 } + +prErrMessage OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An error message describing the problem (if one exists)." + ::= { prEntry 101 } + +prErrFix OBJECT-TYPE + SYNTAX UCDErrorFix + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting this to one will try to fix the problem if + the agent has been configured with a script to call + to attempt to fix problems automatically using remote + snmp operations." + ::= { prEntry 102 } + +prErrFixCmd OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The command that gets run when the prErrFix column is + set to 1." + ::= { prEntry 103 } + + + +extTable OBJECT-TYPE + SYNTAX SEQUENCE OF ExtEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table of extensible commands returning output and + result codes. These commands are configured via the + agent's snmpd.conf file." + ::= { ucdavis 8 } + +extEntry OBJECT-TYPE + SYNTAX ExtEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing an extensible script/program and its output." + INDEX { extIndex } + ::= { extTable 1 } + +ExtEntry ::= SEQUENCE { + extIndex Integer32, + extNames DisplayString, + extCommand DisplayString, + extResult Integer32, + extOutput DisplayString, + extErrFix UCDErrorFix, + extErrFixCmd DisplayString +} + +extIndex OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Reference Index for extensible scripts. Simply an + integer row number." + ::= { extEntry 1 } + +extNames OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A Short, one name description of the extensible command." + ::= { extEntry 2 } + +extCommand OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The command line to be executed." + ::= { extEntry 3 } + +extResult OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The result code (exit status) from the executed command." + ::= { extEntry 100 } + +extOutput OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The first line of output of the executed command." + ::= { extEntry 101 } + +extErrFix OBJECT-TYPE + SYNTAX UCDErrorFix + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting this to one will try to fix the problem if + the agent has been configured with a script to call + to attempt to fix problems automatically using remote + snmp operations." + ::= { extEntry 102 } + +extErrFixCmd OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The command that gets run when the extErrFix column is + set to 1." + ::= { extEntry 103 } + +-- +-- Memory usage/watch reporting. +-- Not supported on all systems! +-- See agent/mibgroup/ucd_snmp.h to see if its loaded for your architecture. +-- +memory OBJECT IDENTIFIER ::= { ucdavis 4 } + +memIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bogus Index. This should always return the integer 0." + ::= { memory 1 } + +memErrorName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bogus Name. This should always return the string 'swap'." + ::= { memory 2 } + +memTotalSwap OBJECT-TYPE + SYNTAX Integer32 + UNITS "kB" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total amount of swap space configured for this host." + ::= { memory 3 } + +memAvailSwap OBJECT-TYPE + SYNTAX Integer32 + UNITS "kB" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of swap space currently unused or available." + ::= { memory 4 } + +memTotalReal OBJECT-TYPE + SYNTAX Integer32 + UNITS "kB" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total amount of real/physical memory installed + on this host." + ::= { memory 5 } + +memAvailReal OBJECT-TYPE + SYNTAX Integer32 + UNITS "kB" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of real/physical memory currently unused + or available." + ::= { memory 6 } + +memTotalSwapTXT OBJECT-TYPE + SYNTAX Integer32 + UNITS "kB" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total amount of swap space or virtual memory allocated + for text pages on this host. + + This object will not be implemented on hosts where the + underlying operating system does not distinguish text + pages from other uses of swap space or virtual memory." + ::= { memory 7 } + +memAvailSwapTXT OBJECT-TYPE + SYNTAX Integer32 + UNITS "kB" + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The amount of swap space or virtual memory currently + being used by text pages on this host. + + This object will not be implemented on hosts where the + underlying operating system does not distinguish text + pages from other uses of swap space or virtual memory. + + Note that (despite the name), this value reports the + amount used, rather than the amount free or available + for use. For clarity, this object is being deprecated + in favour of 'memUsedSwapTXT(16)." + ::= { memory 8 } + +memTotalRealTXT OBJECT-TYPE + SYNTAX Integer32 + UNITS "kB" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total amount of real/physical memory allocated + for text pages on this host. + + This object will not be implemented on hosts where the + underlying operating system does not distinguish text + pages from other uses of physical memory." + ::= { memory 9 } + +memAvailRealTXT OBJECT-TYPE + SYNTAX Integer32 + UNITS "kB" + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The amount of real/physical memory currently being + used by text pages on this host. + + This object will not be implemented on hosts where the + underlying operating system does not distinguish text + pages from other uses of physical memory. + + Note that (despite the name), this value reports the + amount used, rather than the amount free or available + for use. For clarity, this object is being deprecated + in favour of 'memUsedRealTXT(17)." + ::= { memory 10 } + +memTotalFree OBJECT-TYPE + SYNTAX Integer32 + UNITS "kB" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total amount of memory free or available for use on + this host. This value typically covers both real memory + and swap space or virtual memory." + ::= { memory 11 } + +memMinimumSwap OBJECT-TYPE + SYNTAX Integer32 + UNITS "kB" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum amount of swap space expected to be kept + free or available during normal operation of this host. + + If this value (as reported by 'memAvailSwap(4)') falls + below the specified level, then 'memSwapError(100)' will + be set to 1 and an error message made available via + 'memSwapErrorMsg(101)'." + ::= { memory 12 } + +memShared OBJECT-TYPE + SYNTAX Integer32 + UNITS "kB" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total amount of real or virtual memory currently + allocated for use as shared memory. + + This object will not be implemented on hosts where the + underlying operating system does not explicitly identify + memory as specifically reserved for this purpose." + ::= { memory 13 } + +memBuffer OBJECT-TYPE + SYNTAX Integer32 + UNITS "kB" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total amount of real or virtual memory currently + allocated for use as memory buffers. + + This object will not be implemented on hosts where the + underlying operating system does not explicitly identify + memory as specifically reserved for this purpose." + ::= { memory 14 } + +memCached OBJECT-TYPE + SYNTAX Integer32 + UNITS "kB" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The total amount of real or virtual memory currently + allocated for use as cached memory. + + This object will not be implemented on hosts where the + underlying operating system does not explicitly identify + memory as specifically reserved for this purpose." + ::= { memory 15 } + +memUsedSwapTXT OBJECT-TYPE + SYNTAX Integer32 + UNITS "kB" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of swap space or virtual memory currently + being used by text pages on this host. + + This object will not be implemented on hosts where the + underlying operating system does not distinguish text + pages from other uses of swap space or virtual memory." + ::= { memory 16 } + +memUsedRealTXT OBJECT-TYPE + SYNTAX Integer32 + UNITS "kB" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The amount of real/physical memory currently being + used by text pages on this host. + + This object will not be implemented on hosts where the + underlying operating system does not distinguish text + pages from other uses of physical memory." + ::= { memory 17 } + +memSwapError OBJECT-TYPE + SYNTAX UCDErrorFlag + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates whether the amount of available swap space + (as reported by 'memAvailSwap(4)'), is less than the + desired minimum (specified by 'memMinimumSwap(12)')." + ::= { memory 100 } + +memSwapErrorMsg OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Describes whether the amount of available swap space + (as reported by 'memAvailSwap(4)'), is less than the + desired minimum (specified by 'memMinimumSwap(12)')." + ::= { memory 101 } + + +dskTable OBJECT-TYPE + SYNTAX SEQUENCE OF DskEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Disk watching information. Partions to be watched + are configured by the snmpd.conf file of the agent." + ::= { ucdavis 9 } + +dskEntry OBJECT-TYPE + SYNTAX DskEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing a disk and its statistics." + INDEX { dskIndex } + ::= { dskTable 1 } + +DskEntry ::= SEQUENCE { + dskIndex Integer32, + dskPath DisplayString, + dskDevice DisplayString, + dskMinimum Integer32, + dskMinPercent Integer32, + dskTotal Integer32, + dskAvail Integer32, + dskUsed Integer32, + dskPercent Integer32, + dskPercentNode Integer32, + dskErrorFlag UCDErrorFlag, + dskErrorMsg DisplayString, + dskTotalLow Unsigned32, + dskTotalHigh Unsigned32, + dskAvailLow Unsigned32, + dskAvailHigh Unsigned32, + dskUsedLow Unsigned32, + dskUsedHigh Unsigned32 +} + +dskIndex OBJECT-TYPE + SYNTAX Integer32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Integer reference number (row number) for the disk mib." + ::= { dskEntry 1 } + +dskPath OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Path where the disk is mounted." + ::= { dskEntry 2 } + +dskDevice OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Path of the device for the partition" + ::= { dskEntry 3 } + +dskMinimum OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Minimum space required on the disk (in kBytes) before the + errors are triggered. Either this or dskMinPercent is + configured via the agent's snmpd.conf file." + ::= { dskEntry 4 } + +dskMinPercent OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Percentage of minimum space required on the disk before the + errors are triggered. Either this or dskMinimum is + configured via the agent's snmpd.conf file." + ::= { dskEntry 5 } + +dskTotal OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total size of the disk/partion (kBytes). + For large disks (>2Tb), this value will + latch at INT32_MAX (2147483647)." + ::= { dskEntry 6 } + +dskAvail OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Available space on the disk. + For large lightly-used disks (>2Tb), this + value will latch at INT32_MAX (2147483647)." + ::= { dskEntry 7 } + +dskUsed OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Used space on the disk. + For large heavily-used disks (>2Tb), this + value will latch at INT32_MAX (2147483647)." + ::= { dskEntry 8 } + +dskPercent OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Percentage of space used on disk" + ::= { dskEntry 9 } + +dskPercentNode OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Percentage of inodes used on disk" + ::= { dskEntry 10 } + +dskTotalLow OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total size of the disk/partion (kBytes). + Together with dskTotalHigh composes 64-bit number." + ::= { dskEntry 11 } + +dskTotalHigh OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total size of the disk/partion (kBytes). + Together with dskTotalLow composes 64-bit number." + ::= { dskEntry 12 } + +dskAvailLow OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Available space on the disk (kBytes). + Together with dskAvailHigh composes 64-bit number." + ::= { dskEntry 13 } + +dskAvailHigh OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Available space on the disk (kBytes). + Together with dskAvailLow composes 64-bit number." + ::= { dskEntry 14 } + +dskUsedLow OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Used space on the disk (kBytes). + Together with dskUsedHigh composes 64-bit number." + ::= { dskEntry 15 } + +dskUsedHigh OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Used space on the disk (kBytes). + Together with dskUsedLow composes 64-bit number." + ::= { dskEntry 16 } + +dskErrorFlag OBJECT-TYPE + SYNTAX UCDErrorFlag + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Error flag signaling that the disk or partition is under + the minimum required space configured for it." + ::= { dskEntry 100 } + +dskErrorMsg OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A text description providing a warning and the space left + on the disk." + ::= { dskEntry 101 } + +laTable OBJECT-TYPE + SYNTAX SEQUENCE OF LaEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Load average information." + ::= { ucdavis 10 } + +laEntry OBJECT-TYPE + SYNTAX LaEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing a load average and its values." + INDEX { laIndex } + ::= { laTable 1 } + +LaEntry ::= SEQUENCE { + laIndex Integer32, + laNames DisplayString, + laLoad DisplayString, + laConfig DisplayString, + laLoadInt Integer32, + laLoadFloat Float, + laErrorFlag UCDErrorFlag, + laErrMessage DisplayString +} + +laIndex OBJECT-TYPE + SYNTAX Integer32 (0..3) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "reference index/row number for each observed loadave." + ::= { laEntry 1 } + +laNames OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The list of loadave names we're watching." + ::= { laEntry 2 } + +laLoad OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The 1,5 and 15 minute load averages (one per row)." + ::= { laEntry 3 } + +laConfig OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The watch point for load-averages to signal an + error. If the load averages rises above this value, + the laErrorFlag below is set." + ::= { laEntry 4 } + +laLoadInt OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The 1,5 and 15 minute load averages as an integer. + This is computed by taking the floating point + loadaverage value and multiplying by 100, then + converting the value to an integer." + ::= { laEntry 5 } + +laLoadFloat OBJECT-TYPE + SYNTAX Float + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The 1,5 and 15 minute load averages as an opaquely + wrapped floating point number." + ::= { laEntry 6 } + +laErrorFlag OBJECT-TYPE + SYNTAX UCDErrorFlag + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A Error flag to indicate the load-average has crossed + its threshold value defined in the snmpd.conf file. + It is set to 1 if the threshold is crossed, 0 otherwise." + ::= { laEntry 100 } + +laErrMessage OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An error message describing the load-average and its + surpased watch-point value." + ::= { laEntry 101 } + + +version OBJECT IDENTIFIER ::= { ucdavis 100 } + +versionIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Index to mib (always 0)" + ::= { version 1 } + +versionTag OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "CVS tag keyword" + ::= { version 2 } + +versionDate OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Date string from RCS keyword" + ::= { version 3 } + +versionCDate OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Date string from ctime() " + ::= { version 4 } + +versionIdent OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Id string from RCS keyword" + ::= { version 5 } + +versionConfigureOptions OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Options passed to the configure script when this agent was built." + ::= { version 6 } + +versionClearCache OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set to 1 to clear the exec cache, if enabled" + ::= { version 10 } + +versionUpdateConfig OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set to 1 to read-read the config file(s)." + ::= { version 11 } + +versionRestartAgent OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set to 1 to restart the agent." + ::= { version 12 } + +versionSavePersistentData OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set to 1 to force the agent to save it's persistent data immediately." + ::= { version 13 } + +versionDoDebugging OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set to 1 to turn debugging statements on in the agent or 0 + to turn it off." + ::= { version 20 } + + +snmperrs OBJECT IDENTIFIER ::= { ucdavis 101 } + +snmperrIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bogus Index for snmperrs (always 0)." + ::= { snmperrs 1 } + +snmperrNames OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "snmp" + ::= { snmperrs 2 } + +snmperrErrorFlag OBJECT-TYPE + SYNTAX UCDErrorFlag + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A Error flag to indicate trouble with the agent. It + goes to 1 if there is an error, 0 if no error." + ::= { snmperrs 100 } + +snmperrErrMessage OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An error message describing the problem (if one exists)." + ::= { snmperrs 101 } + + +mrTable OBJECT-TYPE + SYNTAX SEQUENCE OF MrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A table displaying all the oid's registered by mib modules in + the agent. Since the agent is modular in nature, this lists + each module's OID it is responsible for and the name of the module" + ::= { ucdavis 102 } + +mrEntry OBJECT-TYPE + SYNTAX MrEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry containing a registered mib oid." + INDEX { IMPLIED mrIndex } + ::= { mrTable 1 } + +MrEntry ::= SEQUENCE { + mrIndex OBJECT IDENTIFIER, + mrModuleName DisplayString +} + +mrIndex OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The registry slot of a mibmodule." + ::= { mrEntry 1 } + +mrModuleName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The module name that registered this OID." + ::= { mrEntry 2 } + +systemStats OBJECT IDENTIFIER ::= { ucdavis 11 } + +ssIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bogus Index. This should always return the integer 1." + ::= { systemStats 1 } + +ssErrorName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bogus Name. This should always return the string 'systemStats'." + ::= { systemStats 2 } + +ssSwapIn OBJECT-TYPE + SYNTAX Integer32 + UNITS "kB" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average amount of memory swapped in from disk, + calculated over the last minute." + ::= { systemStats 3 } + +ssSwapOut OBJECT-TYPE + SYNTAX Integer32 + UNITS "kB" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average amount of memory swapped out to disk, + calculated over the last minute." + ::= { systemStats 4 } + +ssIOSent OBJECT-TYPE + SYNTAX Integer32 + UNITS "blocks/s" + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The average amount of data written to disk or other + block device, calculated over the last minute. + + This object has been deprecated in favour of + 'ssIORawSent(57)', which can be used to calculate + the same metric, but over any desired time period." + ::= { systemStats 5 } + +ssIOReceive OBJECT-TYPE + SYNTAX Integer32 + UNITS "blocks/s" + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The average amount of data read from disk or other + block device, calculated over the last minute. + + This object has been deprecated in favour of + 'ssIORawReceived(58)', which can be used to calculate + the same metric, but over any desired time period." + ::= { systemStats 6 } + +ssSysInterrupts OBJECT-TYPE + SYNTAX Integer32 + UNITS "interrupts/s" + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The average rate of interrupts processed (including + the clock) calculated over the last minute. + + This object has been deprecated in favour of + 'ssRawInterrupts(59)', which can be used to calculate + the same metric, but over any desired time period." + ::= { systemStats 7 } + +ssSysContext OBJECT-TYPE + SYNTAX Integer32 + UNITS "switches/s" + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The average rate of context switches, + calculated over the last minute. + + This object has been deprecated in favour of + 'ssRawContext(60)', which can be used to calculate + the same metric, but over any desired time period." + ::= { systemStats 8 } + +ssCpuUser OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The percentage of CPU time spent processing + user-level code, calculated over the last minute. + + This object has been deprecated in favour of + 'ssCpuRawUser(50)', which can be used to calculate + the same metric, but over any desired time period." + ::= { systemStats 9 } + +ssCpuSystem OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The percentage of CPU time spent processing + system-level code, calculated over the last minute. + + This object has been deprecated in favour of + 'ssCpuRawSystem(52)', which can be used to calculate + the same metric, but over any desired time period." + ::= { systemStats 10 } + +ssCpuIdle OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The percentage of processor time spent idle, + calculated over the last minute. + + This object has been deprecated in favour of + 'ssCpuRawIdle(53)', which can be used to calculate + the same metric, but over any desired time period." + ::= { systemStats 11 } + +-- The agent only implements those of the following counters that the +-- kernel supports! Don't expect all to be present. + +ssCpuRawUser OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 'ticks' (typically 1/100s) spent + processing user-level code. + + On a multi-processor system, the 'ssCpuRaw*' + counters are cumulative over all CPUs, so their + sum will typically be N*100 (for N processors)." + ::= { systemStats 50 } + +ssCpuRawNice OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 'ticks' (typically 1/100s) spent + processing reduced-priority code. + + This object will not be implemented on hosts where + the underlying operating system does not measure + this particular CPU metric. + + On a multi-processor system, the 'ssCpuRaw*' + counters are cumulative over all CPUs, so their + sum will typically be N*100 (for N processors)." + ::= { systemStats 51 } + +ssCpuRawSystem OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 'ticks' (typically 1/100s) spent + processing system-level code. + + On a multi-processor system, the 'ssCpuRaw*' + counters are cumulative over all CPUs, so their + sum will typically be N*100 (for N processors). + + This object may sometimes be implemented as the + combination of the 'ssCpuRawWait(54)' and + 'ssCpuRawKernel(55)' counters, so care must be + taken when summing the overall raw counters." + ::= { systemStats 52 } + +ssCpuRawIdle OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 'ticks' (typically 1/100s) spent + idle. + + On a multi-processor system, the 'ssCpuRaw*' + counters are cumulative over all CPUs, so their + sum will typically be N*100 (for N processors)." + ::= { systemStats 53 } + +ssCpuRawWait OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 'ticks' (typically 1/100s) spent + waiting for IO. + + This object will not be implemented on hosts where + the underlying operating system does not measure + this particular CPU metric. This time may also be + included within the 'ssCpuRawSystem(52)' counter. + + On a multi-processor system, the 'ssCpuRaw*' + counters are cumulative over all CPUs, so their + sum will typically be N*100 (for N processors)." + ::= { systemStats 54 } + +ssCpuRawKernel OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 'ticks' (typically 1/100s) spent + processing kernel-level code. + + This object will not be implemented on hosts where + the underlying operating system does not measure + this particular CPU metric. This time may also be + included within the 'ssCpuRawSystem(52)' counter. + + On a multi-processor system, the 'ssCpuRaw*' + counters are cumulative over all CPUs, so their + sum will typically be N*100 (for N processors)." + ::= { systemStats 55 } + +ssCpuRawInterrupt OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 'ticks' (typically 1/100s) spent + processing hardware interrupts. + + This object will not be implemented on hosts where + the underlying operating system does not measure + this particular CPU metric. + + On a multi-processor system, the 'ssCpuRaw*' + counters are cumulative over all CPUs, so their + sum will typically be N*100 (for N processors)." + ::= { systemStats 56 } + +ssIORawSent OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of blocks sent to a block device" + ::= { systemStats 57 } + +ssIORawReceived OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of blocks received from a block device" + ::= { systemStats 58 } + +ssRawInterrupts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of interrupts processed" + ::= { systemStats 59 } + +ssRawContexts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of context switches" + ::= { systemStats 60 } + +ssCpuRawSoftIRQ OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 'ticks' (typically 1/100s) spent + processing software interrupts. + + This object will not be implemented on hosts where + the underlying operating system does not measure + this particular CPU metric. + + On a multi-processor system, the 'ssCpuRaw*' + counters are cumulative over all CPUs, so their + sum will typically be N*100 (for N processors)." + ::= { systemStats 61 } + +ssRawSwapIn OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of blocks swapped in" + ::= { systemStats 62 } + +ssRawSwapOut OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of blocks swapped out" + ::= { systemStats 63 } + +ssCpuRawSteal OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 'ticks' (typically 1/100s) spent + by the hypervisor code to run other VMs even + though the CPU in the current VM had something runnable. + + This object will not be implemented on hosts where + the underlying operating system does not measure + this particular CPU metric. + + On a multi-processor system, the 'ssCpuRaw*' + counters are cumulative over all CPUs, so their + sum will typically be N*100 (for N processors)." + ::= { systemStats 64 } + +ssCpuRawGuest OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 'ticks' (typically 1/100s) spent + by the CPU to run a virtual CPU (guest). + + This object will not be implemented on hosts where + the underlying operating system does not measure + this particular CPU metric. + + On a multi-processor system, the 'ssCpuRaw*' + counters are cumulative over all CPUs, so their + sum will typically be N*100 (for N processors)." + ::= { systemStats 65 } + +ssCpuRawGuestNice OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of 'ticks' (typically 1/100s) spent + by the CPU to run a niced virtual CPU (guest). + + This object will not be implemented on hosts where + the underlying operating system does not measure + this particular CPU metric. + + On a multi-processor system, the 'ssCpuRaw*' + counters are cumulative over all CPUs, so their + sum will typically be N*100 (for N processors)." + ::= { systemStats 66 } + +-- possibly used in the future: +-- +-- ssErrorFlag OBJECT-TYPE +-- SYNTAX UCDErrorFlag +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- "Error flag." +-- ::= { systemStats 100 } +-- +-- ssErrMessage OBJECT-TYPE +-- SYNTAX DisplayString +-- MAX-ACCESS read-only +-- STATUS current +-- DESCRIPTION +-- "Error message describing the errorflag condition." +-- ::= { systemStats 101 } + + +ucdTraps OBJECT IDENTIFIER ::= { ucdavis 251 } + +ucdStart NOTIFICATION-TYPE + STATUS current + DESCRIPTION + "This trap could in principle be sent when the agent start" + ::= { ucdTraps 1 } + +ucdShutdown NOTIFICATION-TYPE + STATUS current + DESCRIPTION + "This trap is sent when the agent terminates" + ::= { ucdTraps 2 } + +-- +-- File Table: monitor a list of files to check for a maximum size. +-- + +fileTable OBJECT-TYPE + SYNTAX SEQUENCE OF FileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of monitored files." + ::= { ucdavis 15 } + +fileEntry OBJECT-TYPE + SYNTAX FileEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry of file" + INDEX { fileIndex } + ::= { fileTable 1 } + +FileEntry ::= SEQUENCE { + fileIndex Integer32, + fileName DisplayString, + fileSize Integer32, + fileMax Integer32, + fileErrorFlag UCDErrorFlag, + fileErrorMsg DisplayString +} + +fileIndex OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Index of file" + ::= { fileEntry 1 } + +fileName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Filename" + ::= { fileEntry 2 } + +fileSize OBJECT-TYPE + SYNTAX Integer32 + UNITS "kB" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Size of file (kB)" + ::= { fileEntry 3 } + +fileMax OBJECT-TYPE + SYNTAX Integer32 + UNITS "kB" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Limit of filesize (kB)" + ::= { fileEntry 4 } + +fileErrorFlag OBJECT-TYPE + SYNTAX UCDErrorFlag + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Limit exceeded flag" + ::= { fileEntry 100 } + +fileErrorMsg OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Filesize error message" + ::= { fileEntry 101 } + +logMatch OBJECT IDENTIFIER ::= { ucdavis 16 } + +logMatchMaxEntries OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum number of logmatch entries + this snmpd daemon can support." + ::= { logMatch 1 } + +logMatchTable OBJECT-TYPE + SYNTAX SEQUENCE OF LogMatchEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of monitored files." + ::= { logMatch 2 } + +logMatchEntry OBJECT-TYPE + SYNTAX LogMatchEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry of file" + INDEX { logMatchIndex } + ::= { logMatchTable 1 } + +LogMatchEntry ::= + SEQUENCE { + logMatchIndex + Integer32, + logMatchName + DisplayString, + logMatchFilename + DisplayString, + logMatchRegEx + DisplayString, + logMatchGlobalCounter + Counter32, + logMatchGlobalCount + Integer32, + logMatchCurrentCounter + Counter32, + logMatchCurrentCount + Integer32, + logMatchCounter + Counter32, + logMatchCount + Integer32, + logMatchCycle + Integer32, + logMatchErrorFlag + UCDErrorFlag, + logMatchRegExCompilation + DisplayString + } + +logMatchIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Index of logmatch" + ::= { logMatchEntry 1 } + +logMatchName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "logmatch instance name" + ::= { logMatchEntry 2 } + +logMatchFilename OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "filename to be logmatched" + ::= { logMatchEntry 3 } + +logMatchRegEx OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "regular expression" + ::= { logMatchEntry 4 } + +logMatchGlobalCounter OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "global count of matches" + ::= { logMatchEntry 5 } + +logMatchGlobalCount OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Description." + ::= { logMatchEntry 6 } + +logMatchCurrentCounter OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Regex match counter. This counter will + be reset with each logfile rotation." + ::= { logMatchEntry 7 } + +logMatchCurrentCount OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Description." + ::= { logMatchEntry 8 } + +logMatchCounter OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Regex match counter. This counter will + be reset with each read" + ::= { logMatchEntry 9 } + +logMatchCount OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Description." + ::= { logMatchEntry 10 } + +logMatchCycle OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "time between updates (if not queried) in seconds" + ::= { logMatchEntry 11 } + +logMatchErrorFlag OBJECT-TYPE + SYNTAX UCDErrorFlag + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "errorflag: is this line configured correctly?" + ::= { logMatchEntry 100 } + +logMatchRegExCompilation OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "message of regex precompilation" + ::= { logMatchEntry 101 } + +END |