======================================================= libfaketime, version 0.9.5 (October 2013) (previously also know as FakeTime Preload Library) ======================================================= Content of this file: --------------------- 1. Introduction 2. Compatibility issues 3. Installation 4. Usage a) Basics b) Using absolute dates c) Using 'start at' dates d) Using offsets for relative dates e) Advanced features and caveats f) Faking the date and time system-wide g) Using the "faketime" wrapper script h) "Limiting" libfaketime i) Spawning an external process j) Saving timestamps to file, loading them from file 5. License 6. Contact 1. Introduction --------------- libfaketime intercepts various system calls which programs use to retrieve the current date and time. It can then report faked dates and times (as specified by you, the user) to these programs. This means you can modify the system time a program sees without having to change the time system-wide. libfaketime allows you to specify both absolute dates (e.g., 01/01/2004) and relative dates (e.g., 10 days ago). libfaketime might be used for various purposes, for example - running legacy software with y2k bugs - testing software for year-2038 compliance - debugging time-related issues, such as expired SSL certificates - running software which ceases to run outside a certain timeframe - using different system-wide date and time settings, e.g., on OpenVZ- based virtual machines running on the same host. 2. Compatibility issues ----------------------- * libfaketime has been designed on and for Linux, but is supposed and has been reported to work on other *NIXes as well, including Mac OS X. * libfaketime uses the library preload mechanism and thus cannot work with statically linked binaries or binaries that have the setuid-flag set (e.g., suidroot programs like "ping" or "passwd"). Please see you system linker's manpage for further details (man ld). * As of version 0.7, support has been added for use in a pthreads environment. A separate library is built (libfaketimeMT.so.1) which contains the pthread synchronization calls. This library also single-threads calls through the time() intercept, because several variables are statically cached by the library and could cause issues when accessed without synchronization. However, the performance penalty for this might be an issue for some applications. If this is the case, you can try using an unsynchronized time() intercept by removing the -DPTHREAD_SINGLETHREADED_TIME from the Makefile and rebuilding libfaketimeMT.so.1 . Thanks to David North, TDI! * If and only if you want to run Java programs with faked times in the future (not in the past) on Linux, you also should set the environment variable LD_ASSUME_KERNEL=2.4.19 before running the appropriate "java" command. This fixes an occasional bug where Java locks up at exiting. Again, this is only required for Java with faked times in the future. Thanks to Jamie Cameron for reporting this issue and finding a workaround! * libfaketime will eventually be bypassed by applications that dynamically load system libraries, such as librt, explicitly themselves instead of relying on the linker to do so at application start time. libfaketime will not work with those applications unless you can modify them. * Applications can explicitly be designed to prevent libfaketime from working, e.g., by checking whether certain environment variables are set or whether libfaketime-specific files are present. 3. Installation --------------- Running "make" should compile both library versions and a test program, which it then also executes. If the test works fine, you should copy the libfaketime libraries (libfaketime.so.1, and libfaketimeMT.so.1) to the place you want them in. Running "make install" will attempt to place them in /usr/local/lib/faketime and will install the wrapper shell script "faketime" in /usr/local/bin, both of which most likely will require root privileges; however, from a technical point of view, there is no necessity for a system-wide installation, so you can use libfaketime also on machines where you do not have root privileges. You may want to adjust the PREFIX variable in the Makefiles accordingly. By default, the Makefile compiles/links libfaketime for your default system architecture. If you need to build, e.g., 32-bit files on a 64-bit platform, please see the notes about CFLAGS and LDFLAGS in src/Makefile. Since version 0.6, system calls to file timestamps are also intercepted, thanks to a contribution by Philipp Hachtmann. This is especially useful in combination with relative time offsets as explained in section 4d) below, if a program writes and reads files whose timestamps also shall be faked. If you do not need this feature or if it confuses the application you want to use FTPL with, define the environment variable NO_FAKE_STAT, and the intercepted stat calls will be passed through unaltered. On OS X, it is necessary to compile differently, due to the different behavior dyld has. Use the Makefile.MacOS provided to compile libfaketime.dylib.1. Additionally, instead of using LD_PRELOAD, the variable DYLD_INSERT_LIBRARIES should be set to the path to libfaketime.dylib.1, and the variable DYLD_FORCE_FLAT_NAMESPACE should be set (to anything). Mac OS X users should read README.OSX for additional details. 4. Usage -------- 4a) Usage basics ---------------- Using libfaketime on a program of your choice consists of two steps: 1. Making sure libfaketime gets loaded by the system's linker. 2. Specify the faked time. As an example, we want the "date" command to report our faked time. To do so, we could use the following command line on Linux: user@host> date Tue Nov 23 12:01:05 CEST 2007 user@host> LD_PRELOAD=/usr/local/lib/libfaketime.so.1 FAKETIME="-15d" date Mon Nov 8 12:01:12 CEST 2007 The basic way of running any command/program with libfaketime enabled is to make sure the environment variable LD_PRELOAD contains the full path and filename of the libfaketime library. This can either be done by setting it once beforehand: export LD_PRELOAD=/path/to/libfaketime.so.1 (now run any command you want) Or it can be done by specifying it on the command line itself: LD_PRELOAD=/path/to/libfaketime.so.1 your_command_here (These examples are for the bash shell; how environment variables are set may vary on your system.) However, also the faked time should be specified; otherwise, libfaketime will be loaded, but just report the real system time. There are three ways to specify the faked time: a) By setting the environment variable FAKETIME. b) By using the file .faketimerc in your home directory. c) By using the file /etc/faketimerc for a system-wide default. If you want to use b) or c), $HOME/.faketimerc or /etc/faketimerc consist of only one line of text with exactly the same content as the FAKETIME environment variable, which is described below. Note that /etc/faketimerc will only be used if there is no $HOME/.faketimerc, and the FAKETIME environment variable always has priority over the files. 4b) Using absolute dates ------------------------ The format which _must_ be used for _absolute_ dates is "YYYY-MM-DD hh:mm:ss". For example, the 24th of December, 2002, 8:30 PM would have to be specified as FAKETIME="2002-12-24 20:30:00". 4c) Using 'start at' dates -------------------------- (Thanks to a major contribution by David North, TDI in version 0.7) The format which _must_ be used for _start_at_ dates is "@YYYY-MM-DD hh:mm:ss". For example, the 24th of December, 2002, 8:30 PM would have to be specified as FAKETIME="@2002-12-24 20:30:00". The absolute dates described in 4b simulate a STOPPED system clock at the specified absolute time. The 'start at' format allows a 'relative' clock operation as described below in section 4d, but using a 'start at' time instead of an offset time. 4d) Using offsets for relative dates ------------------------------------ Relative date offsets can be positive or negative, thus what you put into FAKETIME _must_ either start with a + or a -, followed by a number, and optionally followed by a multiplier: - by default, the offset you specify is in seconds. Example: export FAKETIME="-120" will set the faked time 2 minutes (120 seconds) behind the real time. - the multipliers "m", "h", "d" and "y" can be used to specify the offset in minutes, hours, days and years (365 days each), respectively. Examples: export FAKETIME="-10m" sets the faked time 10 minutes behind the real time. export FAKETIME="+14d" sets the faked time to 14 days in the future. You now should understand the complete example we've used before: LD_PRELOAD=/usr/local/lib/libfaketime.so.1 FAKETIME="-15d" date This command line makes sure FTPL gets loaded and sets the faked time to 15 days in the past. Moreno Baricevic has contributed support for the FAKETIME_FMT environment variable, which allows to optionally set the strptime() format: Some simple examples: LD_PRELOAD=./libfaketime.so.1 FAKETIME_FMT=%s FAKETIME="`date +%s -d'1 year ago'`" date LD_PRELOAD=./libfaketime.so.1 FAKETIME_FMT=%s FAKETIME="`stat -c %Y somefile`" date LD_PRELOAD=./libfaketime.so.1 FAKETIME_FMT=%c FAKETIME="`date`" date 4e) Advanced features and caveats --------------------------------- Advanced time specification options: ------------------------------------ Since version 0.8, thanks to a contribution by Karl Chen, fractions can be used in the specification of time offsets. For example, FAKETIME="+1,5h" is equivalent to FAKETIME="+90m". Please be aware that the fraction delimiter depends on your locale settings, so actually you might need to use FAKETIME="+1.5h" You should figure out the proper delimiter, e.g. by using libfaketime on a command like /bin/date where you immediately can verify whether it worked as expected. Also contributed by Karl Chen in v0.8 is the option to speed up or slow down the wall clock time for the program which is executed using libfaketime. For example, FAKETIME="+1y x2" will set the faked time one year into the future and will make the clock run twice as fast. Similarly, FAKETIME="+1y x0,5" will make the clock run only half as fast. As stated above, the fraction delimiter depends on your locale. FAKETIME="+1y i2,0" will make the clock step two seconds per each time(), etc. call, running completely independently of the system clock. It helps running programs with some determinism. In this single case all spawned processes will use the same global clock without restaring it at the start of each process. For testing, your should run a command like LD_PRELOAD=./libfaketime.so.1 FAKETIME="+1,5y x10,0" \ /bin/bash -c 'while true; do echo $SECONDS ; sleep 1 ; done' For each second that the endless loop sleeps, the executed bash shell will think that 10 seconds have passed ($SECONDS is a bash-internal variable measuring the time since the shell was started). (Please note that replacing "echo $SECONDS" e.g. with a call to "/bin/date" will not give the expected result, since /bin/date will always be started as a new process for which also FTPL will be re-initialized. It will show the correct offset (1.5 years in the future), but no speed-ups or slow-downs.) For applications that should use a different date & time each time they are run, consider using the included timeprivacy wrapper shellscript (contributed by adrelanos at riseup dot net). Caveats: -------- Whenever possible, you should use relative offsets or 'start at' dates, and not use absolute dates. Why? Because the absolute date/time you set is fixed, i.e., if a program retrieves the current time, and retrieves the current time again 5 minutes later, it will still get the same result twice. This is likely to break programs which measure the time passing by (e.g., a mail program which checks for new mail every X minutes). Using relative offsets or 'start at' dates solves this problem. libfaketime then will always report the faked time based on the real current time and the offset you've specified. Please also note that your specification of the fake time is cached for 10 seconds in order to enhance the library's performance. Thus, if you change the content of $HOME/.faketimerc or /etc/faketimerc while a program is running, it may take up to 10 seconds before the new fake time is applied. If this is a problem in your scenario, you can disable caching at compile time by adding the command line option -DNO_CACHING to this library's Makefile. 4f) Faking the date and time system-wide ---------------------------------------- David Burley of SourceForge, Inc. reported an interesting use case of applying libfaketime system-wide: Currently, all virtual machines running inside an OpenVZ host have the same system date and time. In order to use multiple sandboxes with different system dates, the libfaketime library can be put into /etc/ld.so.preload; it will then be applied to all commands and programs automatically. This is of course best used with a system-wide /etc/faketimerc file. Kudos to SourceForge, Inc. for providing the patch! Caveat: If you run a virtual machine, its real-time clock might be reset to the real world date & time when you reboot. Depending on your FAKETIME setting, this may lead to side effects, such as forced file system checks on each reboot. System-wide faked time may also lead to unexpected side effects with software auto-update tools, if the offset between real world time and faked system time is too large. If in doubt, set your system's date to the faked time and try out whether everything still works as expected before applying libfaketime system-wide. 4g) Using the "faketime" wrapper -------------------------------- As of version 0.8, libfaketime provides a command named "faketime", which is placed into /usr/bin by "make install". It spares the hassle of setting the LD_PRELOAD and FAKETIME environment variables manually, but only exposes a subset of libfaketime's functionality. On the other hand, it uses the date interpretation function by /bin/date in order to provide higher flexibility regarding the specification of the faked date and time. For example, you can use faketime 'last Friday 5 pm' /your/command/here Of course, also absolute dates can be used, such as in faketime '2008-12-24 08:15:42' /bin/date Thanks to Daniel Kahn Gillmor for providing these suggestions! Balint Reczey has rewritten the wrapper in 0.9.5 from a simple shell script to an efficient wrapper application. 4h) "Limiting" libfaketime -------------------------- Starting with version 0.9, libfaketime can be configured to not be continuously active, but only during a certain time interval. For example, you might want to start a program with the real current time, but after 5 minutes of usage, you might want it to see a faked time, e.g., a year in the future. Dynamic changes to the faked time are alternatively possible by - changing the FAKETIME environment variable at run-time; this is the preferred way if you use libfaketime for debugging and testing as a programmer, as it gives you the most direct control of libfaketime without any performance penalities. - not using the FAKETIME environment variable, but specifying the fake time in a file (such as ~/.faketimerc). You can change the content of this file at run-time. This works best with caching disabled (see Makefile), but comes at a performance cost because this file has to be read and evaluated each time. The feature described here works based on two pairs of environment variables, FAKETIME_START_AFTER_SECONDS and FAKETIME_STOP_AFTER_SECONDS, and FAKETIME_START_AFTER_NUMCALLS and FAKETIME_STOP_AFTER_NUMCALLS The default value for each of these environment variables is -1, which means "ignore this value". If you want libfaketime to be only active during the run-time minutes 2 to 5 of your application, you would set FAKETIME_START_AFTER_SECONDS=60 FAKETIME_STOP_AFTER_SECONDS=300 This means that your application will work with the real time from start (second 0) up to second 60. It will then see a faked time from run-time seconds 60 to 300 (minutes 2, 3, 4, and 5). After run-time second 600, it will again see the real (not-faked) time. This approach is not as flexible as changing the FAKETIME environment variable during runtime, but may be easier to use, works on a per-program (and not a per-user or system-wide) scope, and has only a minor performance overhead. Using the other pair of environment variables, you can limit the activity time of libfaketime not based on wall-clock seconds, but on the number of time-related function calls the started program performs. This alternative is probably only suitable for programmers who either know the code of the program in order to determine useful start/stop values or want to perform fuzzing tests. Both pairs of environment variables can be combined to further restrict libfaketime activity, although this is only useful in very few scenarios. Limiting libfaketime activity in this way is not recommended in general. Many programs will break when they are subject to sudden changes in time, especially if they are started using the current (real) time and are then sent back into the past after, e.g., 5 minutes. For example, they may appear to be frozen or stuck because they are waiting until a certain point in time that, however, is never reached due to the delayed libfaketime activity. Avoid using this functionality unless you are sure you really need it and know what you are doing. 4i) Spawning an external process -------------------------------- From version 0.9 on, libfaketime can execute a shell command once after an arbitrary number of seconds or number of time-related system calls of the program started. This has two limitations one needs to be aware of: * Spawning the external process happens during a time-related system call of the original program. If you want the external process to be started 5 seconds after program start, but this program does not make any time- related system calls before run-time second 8, the start of your external process will be delayed until run-time second 8. * The original program is blocked until the external process is finished, because the intercepting time-related system call will not return earlier. If you need to start a long-running external process, make sure it forks into the background. Spawning the external process is controlled using three environment variables: FAKETIME_SPAWN_TARGET, FAKETIME_SPAWN_SECONDS, FAKETIME_SPAWN_NUMCALLS. Example (using bash on Linux): (... usual libfaketime setup here, setting LD_PRELOAD and FAKETIME ...) export FAKETIME_SPAWN_TARGET="/bin/echo 'Hello world'" export FAKETIME_SPAWN_SECONDS=5 /opt/local/bin/myprogram This will run the "echo" command with the given parameter during the first time-related system function call that "myprogram" performs after running for 5 seconds. 4j) Saving timestamps to file, loading them from file ----------------------------------------------------- Faketime can save faked timestamps to a file specified by FAKETIME_SAVE_FILE environment variable. It can also use the file specified by FAKETIME_LOAD_FILE to replay timestamps from it. After consuming the whole file, libfaketime returns to using the rule set in FAKETIME variable, but the timestamp processes will start counting from will be the last timestamp in the file. The file stores each timestamp in a stream of saved_timestamp structs without any metadata or padding: /* Storage format for timestamps written to file. Big endian. */ struct saved_timestamp { int64_t sec; uint64_t nsec; }; Faketime needs to be run using the faketime wrapper to use these files. This functionality has been added by Balint Reczey in v0.9.5. 5. License ---------- libfaketime has been released under the GNU Public License, GPL. Please see the included COPYING file. 6. Contact ----------- Bug reports, feature suggestions, success reports, and patches/pull requests are highly appreciated: https://github.com/wolfcw/libfaketime