/* -*- Mode: C; indent-tabs-mode:t ; c-basic-offset:8 -*- */ /* * USB descriptor handling functions for libusb * Copyright © 2007 Daniel Drake * Copyright © 2001 Johannes Erdfelt * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2.1 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ #include #include #include #include #include #include "libusbi.h" #define DESC_HEADER_LENGTH 2 #define DEVICE_DESC_LENGTH 18 #define CONFIG_DESC_LENGTH 9 #define INTERFACE_DESC_LENGTH 9 #define ENDPOINT_DESC_LENGTH 7 #define ENDPOINT_AUDIO_DESC_LENGTH 9 /** @defgroup desc USB descriptors * This page details how to examine the various standard USB descriptors * for detected devices */ /* set host_endian if the w values are already in host endian format, * as opposed to bus endian. */ int usbi_parse_descriptor(const unsigned char *source, const char *descriptor, void *dest, int host_endian) { const unsigned char *sp = source; unsigned char *dp = dest; uint16_t w; const char *cp; uint32_t d; for (cp = descriptor; *cp; cp++) { switch (*cp) { case 'b': /* 8-bit byte */ *dp++ = *sp++; break; case 'w': /* 16-bit word, convert from little endian to CPU */ dp += ((uintptr_t)dp & 1); /* Align to word boundary */ if (host_endian) { memcpy(dp, sp, 2); } else { w = (sp[1] << 8) | sp[0]; *((uint16_t *)dp) = w; } sp += 2; dp += 2; break; case 'd': /* 32-bit word, convert from little endian to CPU */ dp += ((uintptr_t)dp & 1); /* Align to word boundary */ if (host_endian) { memcpy(dp, sp, 4); } else { d = (sp[3] << 24) | (sp[2] << 16) | (sp[1] << 8) | sp[0]; *((uint32_t *)dp) = d; } sp += 4; dp += 4; break; case 'u': /* 16 byte UUID */ memcpy(dp, sp, 16); sp += 16; dp += 16; break; } } return (int) (sp - source); } static void clear_endpoint(struct libusb_endpoint_descriptor *endpoint) { if (endpoint->extra) free((unsigned char *) endpoint->extra); } static int parse_endpoint(struct libusb_context *ctx, struct libusb_endpoint_descriptor *endpoint, unsigned char *buffer, int size, int host_endian) { struct usb_descriptor_header header; unsigned char *extra; unsigned char *begin; int parsed = 0; int len; if (size < DESC_HEADER_LENGTH) { usbi_err(ctx, "short endpoint descriptor read %d/%d", size, DESC_HEADER_LENGTH); return LIBUSB_ERROR_IO; } usbi_parse_descriptor(buffer, "bb", &header, 0); if (header.bDescriptorType != LIBUSB_DT_ENDPOINT) { usbi_err(ctx, "unexpected descriptor %x (expected %x)", header.bDescriptorType, LIBUSB_DT_ENDPOINT); return parsed; } if (header.bLength > size) { usbi_warn(ctx, "short endpoint descriptor read %d/%d", size, header.bLength); return parsed; } if (header.bLength >= ENDPOINT_AUDIO_DESC_LENGTH) usbi_parse_descriptor(buffer, "bbbbwbbb", endpoint, host_endian); else if (header.bLength >= ENDPOINT_DESC_LENGTH) usbi_parse_descriptor(buffer, "bbbbwb", endpoint, host_endian); else { usbi_err(ctx, "invalid endpoint bLength (%d)", header.bLength); return LIBUSB_ERROR_IO; } buffer += header.bLength; size -= header.bLength; parsed += header.bLength; /* Skip over the rest of the Class Specific or Vendor Specific */ /* descriptors */ begin = buffer; while (size >= DESC_HEADER_LENGTH) { usbi_parse_descriptor(buffer, "bb", &header, 0); if (header.bLength < DESC_HEADER_LENGTH) { usbi_err(ctx, "invalid extra ep desc len (%d)", header.bLength); return LIBUSB_ERROR_IO; } else if (header.bLength > size) { usbi_warn(ctx, "short extra ep desc read %d/%d", size, header.bLength); return parsed; } /* If we find another "proper" descriptor then we're done */ if ((header.bDescriptorType == LIBUSB_DT_ENDPOINT) || (header.bDescriptorType == LIBUSB_DT_INTERFACE) || (header.bDescriptorType == LIBUSB_DT_CONFIG) || (header.bDescriptorType == LIBUSB_DT_DEVICE)) break; usbi_dbg("skipping descriptor %x", header.bDescriptorType); buffer += header.bLength; size -= header.bLength; parsed += header.bLength; } /* Copy any unknown descriptors into a storage area for drivers */ /* to later parse */ len = (int)(buffer - begin); if (!len) { endpoint->extra = NULL; endpoint->extra_length = 0; return parsed; } extra = malloc(len); endpoint->extra = extra; if (!extra) { endpoint->extra_length = 0; return LIBUSB_ERROR_NO_MEM; } memcpy(extra, begin, len); endpoint->extra_length = len; return parsed; } static void clear_interface(struct libusb_interface *usb_interface) { int i; int j; if (usb_interface->altsetting) { for (i = 0; i < usb_interface->num_altsetting; i++) { struct libusb_interface_descriptor *ifp = (struct libusb_interface_descriptor *) usb_interface->altsetting + i; if (ifp->extra) free((void *) ifp->extra); if (ifp->endpoint) { for (j = 0; j < ifp->bNumEndpoints; j++) clear_endpoint((struct libusb_endpoint_descriptor *) ifp->endpoint + j); free((void *) ifp->endpoint); } } free((void *) usb_interface->altsetting); usb_interface->altsetting = NULL; } } static int parse_interface(libusb_context *ctx, struct libusb_interface *usb_interface, unsigned char *buffer, int size, int host_endian) { int i; int len; int r; int parsed = 0; int interface_number = -1; size_t tmp; struct usb_descriptor_header header; struct libusb_interface_descriptor *ifp; unsigned char *begin; usb_interface->num_altsetting = 0; while (size >= INTERFACE_DESC_LENGTH) { struct libusb_interface_descriptor *altsetting = (struct libusb_interface_descriptor *) usb_interface->altsetting; altsetting = usbi_reallocf(altsetting, sizeof(struct libusb_interface_descriptor) * (usb_interface->num_altsetting + 1)); if (!altsetting) { r = LIBUSB_ERROR_NO_MEM; goto err; } usb_interface->altsetting = altsetting; ifp = altsetting + usb_interface->num_altsetting; usbi_parse_descriptor(buffer, "bbbbbbbbb", ifp, 0); if (ifp->bDescriptorType != LIBUSB_DT_INTERFACE) { usbi_err(ctx, "unexpected descriptor %x (expected %x)", ifp->bDescriptorType, LIBUSB_DT_INTERFACE); return parsed; } if (ifp->bLength < INTERFACE_DESC_LENGTH) { usbi_err(ctx, "invalid interface bLength (%d)", ifp->bLength); r = LIBUSB_ERROR_IO; goto err; } if (ifp->bLength > size) { usbi_warn(ctx, "short intf descriptor read %d/%d", size, ifp->bLength); return parsed; } if (ifp->bNumEndpoints > USB_MAXENDPOINTS) { usbi_err(ctx, "too many endpoints (%d)", ifp->bNumEndpoints); r = LIBUSB_ERROR_IO; goto err; } usb_interface->num_altsetting++; ifp->extra = NULL; ifp->extra_length = 0; ifp->endpoint = NULL; if (interface_number == -1) interface_number = ifp->bInterfaceNumber; /* Skip over the interface */ buffer += ifp->bLength; parsed += ifp->bLength; size -= ifp->bLength; begin = buffer; /* Skip over any interface, class or vendor descriptors */ while (size >= DESC_HEADER_LENGTH) { usbi_parse_descriptor(buffer, "bb", &header, 0); if (header.bLength < DESC_HEADER_LENGTH) { usbi_err(ctx, "invalid extra intf desc len (%d)", header.bLength); r = LIBUSB_ERROR_IO; goto err; } else if (header.bLength > size) { usbi_warn(ctx, "short extra intf desc read %d/%d", size, header.bLength); return parsed; } /* If we find another "proper" descriptor then we're done */ if ((header.bDescriptorType == LIBUSB_DT_INTERFACE) || (header.bDescriptorType == LIBUSB_DT_ENDPOINT) || (header.bDescriptorType == LIBUSB_DT_CONFIG) || (header.bDescriptorType == LIBUSB_DT_DEVICE)) break; buffer += header.bLength; parsed += header.bLength; size -= header.bLength; } /* Copy any unknown descriptors into a storage area for */ /* drivers to later parse */ len = (int)(buffer - begin); if (len) { ifp->extra = malloc(len); if (!ifp->extra) { r = LIBUSB_ERROR_NO_MEM; goto err; } memcpy((unsigned char *) ifp->extra, begin, len); ifp->extra_length = len; } if (ifp->bNumEndpoints > 0) { struct libusb_endpoint_descriptor *endpoint; tmp = ifp->bNumEndpoints * sizeof(struct libusb_endpoint_descriptor); endpoint = malloc(tmp); ifp->endpoint = endpoint; if (!endpoint) { r = LIBUSB_ERROR_NO_MEM; goto err; } memset(endpoint, 0, tmp); for (i = 0; i < ifp->bNumEndpoints; i++) { r = parse_endpoint(ctx, endpoint + i, buffer, size, host_endian); if (r < 0) goto err; if (r == 0) { ifp->bNumEndpoints = (uint8_t)i; break;; } buffer += r; parsed += r; size -= r; } } /* We check to see if it's an alternate to this one */ ifp = (struct libusb_interface_descriptor *) buffer; if (size < LIBUSB_DT_INTERFACE_SIZE || ifp->bDescriptorType != LIBUSB_DT_INTERFACE || ifp->bInterfaceNumber != interface_number) return parsed; } return parsed; err: clear_interface(usb_interface); return r; } static void clear_configuration(struct libusb_config_descriptor *config) { if (config->interface) { int i; for (i = 0; i < config->bNumInterfaces; i++) clear_interface((struct libusb_interface *) config->interface + i); free((void *) config->interface); } if (config->extra) free((void *) config->extra); } static int parse_configuration(struct libusb_context *ctx, struct libusb_config_descriptor *config, unsigned char *buffer, int size, int host_endian) { int i; int r; size_t tmp; struct usb_descriptor_header header; struct libusb_interface *usb_interface; if (size < LIBUSB_DT_CONFIG_SIZE) { usbi_err(ctx, "short config descriptor read %d/%d", size, LIBUSB_DT_CONFIG_SIZE); return LIBUSB_ERROR_IO; } usbi_parse_descriptor(buffer, "bbwbbbbb", config, host_endian); if (config->bDescriptorType != LIBUSB_DT_CONFIG) { usbi_err(ctx, "unexpected descriptor %x (expected %x)", config->bDescriptorType, LIBUSB_DT_CONFIG); return LIBUSB_ERROR_IO; } if (config->bLength < LIBUSB_DT_CONFIG_SIZE) { usbi_err(ctx, "invalid config bLength (%d)", config->bLength); return LIBUSB_ERROR_IO; } if (config->bLength > size) { usbi_err(ctx, "short config descriptor read %d/%d", size, config->bLength); return LIBUSB_ERROR_IO; } if (config->bNumInterfaces > USB_MAXINTERFACES) { usbi_err(ctx, "too many interfaces (%d)", config->bNumInterfaces); return LIBUSB_ERROR_IO; } tmp = config->bNumInterfaces * sizeof(struct libusb_interface); usb_interface = malloc(tmp); config->interface = usb_interface; if (!config->interface) return LIBUSB_ERROR_NO_MEM; memset(usb_interface, 0, tmp); buffer += config->bLength; size -= config->bLength; config->extra = NULL; config->extra_length = 0; for (i = 0; i < config->bNumInterfaces; i++) { int len; unsigned char *begin; /* Skip over the rest of the Class Specific or Vendor */ /* Specific descriptors */ begin = buffer; while (size >= DESC_HEADER_LENGTH) { usbi_parse_descriptor(buffer, "bb", &header, 0); if (header.bLength < DESC_HEADER_LENGTH) { usbi_err(ctx, "invalid extra config desc len (%d)", header.bLength); r = LIBUSB_ERROR_IO; goto err; } else if (header.bLength > size) { usbi_warn(ctx, "short extra config desc read %d/%d", size, header.bLength); config->bNumInterfaces = (uint8_t)i; return size; } /* If we find another "proper" descriptor then we're done */ if ((header.bDescriptorType == LIBUSB_DT_ENDPOINT) || (header.bDescriptorType == LIBUSB_DT_INTERFACE) || (header.bDescriptorType == LIBUSB_DT_CONFIG) || (header.bDescriptorType == LIBUSB_DT_DEVICE)) break; usbi_dbg("skipping descriptor 0x%x\n", header.bDescriptorType); buffer += header.bLength; size -= header.bLength; } /* Copy any unknown descriptors into a storage area for */ /* drivers to later parse */ len = (int)(buffer - begin); if (len) { /* FIXME: We should realloc and append here */ if (!config->extra_length) { config->extra = malloc(len); if (!config->extra) { r = LIBUSB_ERROR_NO_MEM; goto err; } memcpy((unsigned char *) config->extra, begin, len); config->extra_length = len; } } r = parse_interface(ctx, usb_interface + i, buffer, size, host_endian); if (r < 0) goto err; if (r == 0) { config->bNumInterfaces = (uint8_t)i; break; } buffer += r; size -= r; } return size; err: clear_configuration(config); return r; } static int raw_desc_to_config(struct libusb_context *ctx, unsigned char *buf, int size, int host_endian, struct libusb_config_descriptor **config) { struct libusb_config_descriptor *_config = malloc(sizeof(*_config)); int r; if (!_config) return LIBUSB_ERROR_NO_MEM; r = parse_configuration(ctx, _config, buf, size, host_endian); if (r < 0) { usbi_err(ctx, "parse_configuration failed with error %d", r); free(_config); return r; } else if (r > 0) { usbi_warn(ctx, "still %d bytes of descriptor data left", r); } *config = _config; return LIBUSB_SUCCESS; } int usbi_device_cache_descriptor(libusb_device *dev) { int r, host_endian = 0; r = usbi_backend->get_device_descriptor(dev, (unsigned char *) &dev->device_descriptor, &host_endian); if (r < 0) return r; if (!host_endian) { dev->device_descriptor.bcdUSB = libusb_le16_to_cpu(dev->device_descriptor.bcdUSB); dev->device_descriptor.idVendor = libusb_le16_to_cpu(dev->device_descriptor.idVendor); dev->device_descriptor.idProduct = libusb_le16_to_cpu(dev->device_descriptor.idProduct); dev->device_descriptor.bcdDevice = libusb_le16_to_cpu(dev->device_descriptor.bcdDevice); } return LIBUSB_SUCCESS; } /** \ingroup desc * Get the USB device descriptor for a given device. * * This is a non-blocking function; the device descriptor is cached in memory. * * Note since libusb-1.0.16, \ref LIBUSB_API_VERSION >= 0x01000102, this * function always succeeds. * * \param dev the device * \param desc output location for the descriptor data * \returns 0 on success or a LIBUSB_ERROR code on failure */ int API_EXPORTED libusb_get_device_descriptor(libusb_device *dev, struct libusb_device_descriptor *desc) { usbi_dbg(""); memcpy((unsigned char *) desc, (unsigned char *) &dev->device_descriptor, sizeof (dev->device_descriptor)); return 0; } /** \ingroup desc * Get the USB configuration descriptor for the currently active configuration. * This is a non-blocking function which does not involve any requests being * sent to the device. * * \param dev a device * \param config output location for the USB configuration descriptor. Only * valid if 0 was returned. Must be freed with libusb_free_config_descriptor() * after use. * \returns 0 on success * \returns LIBUSB_ERROR_NOT_FOUND if the device is in unconfigured state * \returns another LIBUSB_ERROR code on error * \see libusb_get_config_descriptor */ int API_EXPORTED libusb_get_active_config_descriptor(libusb_device *dev, struct libusb_config_descriptor **config) { struct libusb_config_descriptor _config; unsigned char tmp[LIBUSB_DT_CONFIG_SIZE]; unsigned char *buf = NULL; int host_endian = 0; int r; r = usbi_backend->get_active_config_descriptor(dev, tmp, LIBUSB_DT_CONFIG_SIZE, &host_endian); if (r < 0) return r; if (r < LIBUSB_DT_CONFIG_SIZE) { usbi_err(dev->ctx, "short config descriptor read %d/%d", r, LIBUSB_DT_CONFIG_SIZE); return LIBUSB_ERROR_IO; } usbi_parse_descriptor(tmp, "bbw", &_config, host_endian); buf = malloc(_config.wTotalLength); if (!buf) return LIBUSB_ERROR_NO_MEM; r = usbi_backend->get_active_config_descriptor(dev, buf, _config.wTotalLength, &host_endian); if (r >= 0) r = raw_desc_to_config(dev->ctx, buf, r, host_endian, config); free(buf); return r; } /** \ingroup desc * Get a USB configuration descriptor based on its index. * This is a non-blocking function which does not involve any requests being * sent to the device. * * \param dev a device * \param config_index the index of the configuration you wish to retrieve * \param config output location for the USB configuration descriptor. Only * valid if 0 was returned. Must be freed with libusb_free_config_descriptor() * after use. * \returns 0 on success * \returns LIBUSB_ERROR_NOT_FOUND if the configuration does not exist * \returns another LIBUSB_ERROR code on error * \see libusb_get_active_config_descriptor() * \see libusb_get_config_descriptor_by_value() */ int API_EXPORTED libusb_get_config_descriptor(libusb_device *dev, uint8_t config_index, struct libusb_config_descriptor **config) { struct libusb_config_descriptor _config; unsigned char tmp[LIBUSB_DT_CONFIG_SIZE]; unsigned char *buf = NULL; int host_endian = 0; int r; usbi_dbg("index %d", config_index); if (config_index >= dev->num_configurations) return LIBUSB_ERROR_NOT_FOUND; r = usbi_backend->get_config_descriptor(dev, config_index, tmp, LIBUSB_DT_CONFIG_SIZE, &host_endian); if (r < 0) return r; if (r < LIBUSB_DT_CONFIG_SIZE) { usbi_err(dev->ctx, "short config descriptor read %d/%d", r, LIBUSB_DT_CONFIG_SIZE); return LIBUSB_ERROR_IO; } usbi_parse_descriptor(tmp, "bbw", &_config, host_endian); buf = malloc(_config.wTotalLength); if (!buf) return LIBUSB_ERROR_NO_MEM; r = usbi_backend->get_config_descriptor(dev, config_index, buf, _config.wTotalLength, &host_endian); if (r >= 0) r = raw_desc_to_config(dev->ctx, buf, r, host_endian, config); free(buf); return r; } /* iterate through all configurations, returning the index of the configuration * matching a specific bConfigurationValue in the idx output parameter, or -1 * if the config was not found. * returns 0 on success or a LIBUSB_ERROR code */ int usbi_get_config_index_by_value(struct libusb_device *dev, uint8_t bConfigurationValue, int *idx) { uint8_t i; usbi_dbg("value %d", bConfigurationValue); for (i = 0; i < dev->num_configurations; i++) { unsigned char tmp[6]; int host_endian; int r = usbi_backend->get_config_descriptor(dev, i, tmp, sizeof(tmp), &host_endian); if (r < 0) { *idx = -1; return r; } if (tmp[5] == bConfigurationValue) { *idx = i; return 0; } } *idx = -1; return 0; } /** \ingroup desc * Get a USB configuration descriptor with a specific bConfigurationValue. * This is a non-blocking function which does not involve any requests being * sent to the device. * * \param dev a device * \param bConfigurationValue the bConfigurationValue of the configuration you * wish to retrieve * \param config output location for the USB configuration descriptor. Only * valid if 0 was returned. Must be freed with libusb_free_config_descriptor() * after use. * \returns 0 on success * \returns LIBUSB_ERROR_NOT_FOUND if the configuration does not exist * \returns another LIBUSB_ERROR code on error * \see libusb_get_active_config_descriptor() * \see libusb_get_config_descriptor() */ int API_EXPORTED libusb_get_config_descriptor_by_value(libusb_device *dev, uint8_t bConfigurationValue, struct libusb_config_descriptor **config) { int r, idx, host_endian; unsigned char *buf = NULL; if (usbi_backend->get_config_descriptor_by_value) { r = usbi_backend->get_config_descriptor_by_value(dev, bConfigurationValue, &buf, &host_endian); if (r < 0) return r; return raw_desc_to_config(dev->ctx, buf, r, host_endian, config); } r = usbi_get_config_index_by_value(dev, bConfigurationValue, &idx); if (r < 0) return r; else if (idx == -1) return LIBUSB_ERROR_NOT_FOUND; else return libusb_get_config_descriptor(dev, (uint8_t) idx, config); } /** \ingroup desc * Free a configuration descriptor obtained from * libusb_get_active_config_descriptor() or libusb_get_config_descriptor(). * It is safe to call this function with a NULL config parameter, in which * case the function simply returns. * * \param config the configuration descriptor to free */ void API_EXPORTED libusb_free_config_descriptor( struct libusb_config_descriptor *config) { if (!config) return; clear_configuration(config); free(config); } /** \ingroup desc * Get an endpoints superspeed endpoint companion descriptor (if any) * * \param ctx the context to operate on, or NULL for the default context * \param endpoint endpoint descriptor from which to get the superspeed * endpoint companion descriptor * \param ep_comp output location for the superspeed endpoint companion * descriptor. Only valid if 0 was returned. Must be freed with * libusb_free_ss_endpoint_companion_descriptor() after use. * \returns 0 on success * \returns LIBUSB_ERROR_NOT_FOUND if the configuration does not exist * \returns another LIBUSB_ERROR code on error */ int API_EXPORTED libusb_get_ss_endpoint_companion_descriptor( struct libusb_context *ctx, const struct libusb_endpoint_descriptor *endpoint, struct libusb_ss_endpoint_companion_descriptor **ep_comp) { struct usb_descriptor_header header; int size = endpoint->extra_length; const unsigned char *buffer = endpoint->extra; *ep_comp = NULL; while (size >= DESC_HEADER_LENGTH) { usbi_parse_descriptor(buffer, "bb", &header, 0); if (header.bLength < 2 || header.bLength > size) { usbi_err(ctx, "invalid descriptor length %d", header.bLength); return LIBUSB_ERROR_IO; } if (header.bDescriptorType != LIBUSB_DT_SS_ENDPOINT_COMPANION) { buffer += header.bLength; size -= header.bLength; continue; } if (header.bLength < LIBUSB_DT_SS_ENDPOINT_COMPANION_SIZE) { usbi_err(ctx, "invalid ss-ep-comp-desc length %d", header.bLength); return LIBUSB_ERROR_IO; } *ep_comp = malloc(sizeof(**ep_comp)); if (*ep_comp == NULL) return LIBUSB_ERROR_NO_MEM; usbi_parse_descriptor(buffer, "bbbbw", *ep_comp, 0); return LIBUSB_SUCCESS; } return LIBUSB_ERROR_NOT_FOUND; } /** \ingroup desc * Free a superspeed endpoint companion descriptor obtained from * libusb_get_ss_endpoint_companion_descriptor(). * It is safe to call this function with a NULL ep_comp parameter, in which * case the function simply returns. * * \param ep_comp the superspeed endpoint companion descriptor to free */ void API_EXPORTED libusb_free_ss_endpoint_companion_descriptor( struct libusb_ss_endpoint_companion_descriptor *ep_comp) { free(ep_comp); } static int parse_bos(struct libusb_context *ctx, struct libusb_bos_descriptor **bos, unsigned char *buffer, int size, int host_endian) { struct libusb_bos_descriptor bos_header, *_bos; struct libusb_bos_dev_capability_descriptor dev_cap; int i; if (size < LIBUSB_DT_BOS_SIZE) { usbi_err(ctx, "short bos descriptor read %d/%d", size, LIBUSB_DT_BOS_SIZE); return LIBUSB_ERROR_IO; } usbi_parse_descriptor(buffer, "bbwb", &bos_header, host_endian); if (bos_header.bDescriptorType != LIBUSB_DT_BOS) { usbi_err(ctx, "unexpected descriptor %x (expected %x)", bos_header.bDescriptorType, LIBUSB_DT_BOS); return LIBUSB_ERROR_IO; } if (bos_header.bLength < LIBUSB_DT_BOS_SIZE) { usbi_err(ctx, "invalid bos bLength (%d)", bos_header.bLength); return LIBUSB_ERROR_IO; } if (bos_header.bLength > size) { usbi_err(ctx, "short bos descriptor read %d/%d", size, bos_header.bLength); return LIBUSB_ERROR_IO; } _bos = calloc (1, sizeof(*_bos) + bos_header.bNumDeviceCaps * sizeof(void *)); if (!_bos) return LIBUSB_ERROR_NO_MEM; usbi_parse_descriptor(buffer, "bbwb", _bos, host_endian); buffer += bos_header.bLength; size -= bos_header.bLength; /* Get the device capability descriptors */ for (i = 0; i < bos_header.bNumDeviceCaps; i++) { if (size < LIBUSB_DT_DEVICE_CAPABILITY_SIZE) { usbi_warn(ctx, "short dev-cap descriptor read %d/%d", size, LIBUSB_DT_DEVICE_CAPABILITY_SIZE); break; } usbi_parse_descriptor(buffer, "bbb", &dev_cap, host_endian); if (dev_cap.bDescriptorType != LIBUSB_DT_DEVICE_CAPABILITY) { usbi_warn(ctx, "unexpected descriptor %x (expected %x)", dev_cap.bDescriptorType, LIBUSB_DT_DEVICE_CAPABILITY); break; } if (dev_cap.bLength < LIBUSB_DT_DEVICE_CAPABILITY_SIZE) { usbi_err(ctx, "invalid dev-cap bLength (%d)", dev_cap.bLength); libusb_free_bos_descriptor(_bos); return LIBUSB_ERROR_IO; } if (dev_cap.bLength > size) { usbi_warn(ctx, "short dev-cap descriptor read %d/%d", size, dev_cap.bLength); break; } _bos->dev_capability[i] = malloc(dev_cap.bLength); if (!_bos->dev_capability[i]) { libusb_free_bos_descriptor(_bos); return LIBUSB_ERROR_NO_MEM; } memcpy(_bos->dev_capability[i], buffer, dev_cap.bLength); buffer += dev_cap.bLength; size -= dev_cap.bLength; } _bos->bNumDeviceCaps = (uint8_t)i; *bos = _bos; return LIBUSB_SUCCESS; } /** \ingroup desc * Get a Binary Object Store (BOS) descriptor * This is a BLOCKING function, which will send requests to the device. * * \param handle the handle of an open libusb device * \param bos output location for the BOS descriptor. Only valid if 0 was returned. * Must be freed with \ref libusb_free_bos_descriptor() after use. * \returns 0 on success * \returns LIBUSB_ERROR_NOT_FOUND if the device doesn't have a BOS descriptor * \returns another LIBUSB_ERROR code on error */ int API_EXPORTED libusb_get_bos_descriptor(libusb_device_handle *handle, struct libusb_bos_descriptor **bos) { struct libusb_bos_descriptor _bos; uint8_t bos_header[LIBUSB_DT_BOS_SIZE] = {0}; unsigned char *bos_data = NULL; const int host_endian = 0; int r; /* Read the BOS. This generates 2 requests on the bus, * one for the header, and one for the full BOS */ r = libusb_get_descriptor(handle, LIBUSB_DT_BOS, 0, bos_header, LIBUSB_DT_BOS_SIZE); if (r < 0) { if (r != LIBUSB_ERROR_PIPE) usbi_err(handle->dev->ctx, "failed to read BOS (%d)", r); return r; } if (r < LIBUSB_DT_BOS_SIZE) { usbi_err(handle->dev->ctx, "short BOS read %d/%d", r, LIBUSB_DT_BOS_SIZE); return LIBUSB_ERROR_IO; } usbi_parse_descriptor(bos_header, "bbwb", &_bos, host_endian); usbi_dbg("found BOS descriptor: size %d bytes, %d capabilities", _bos.wTotalLength, _bos.bNumDeviceCaps); bos_data = calloc(_bos.wTotalLength, 1); if (bos_data == NULL) return LIBUSB_ERROR_NO_MEM; r = libusb_get_descriptor(handle, LIBUSB_DT_BOS, 0, bos_data, _bos.wTotalLength); if (r >= 0) r = parse_bos(handle->dev->ctx, bos, bos_data, r, host_endian); else usbi_err(handle->dev->ctx, "failed to read BOS (%d)", r); free(bos_data); return r; } /** \ingroup desc * Free a BOS descriptor obtained from libusb_get_bos_descriptor(). * It is safe to call this function with a NULL bos parameter, in which * case the function simply returns. * * \param bos the BOS descriptor to free */ void API_EXPORTED libusb_free_bos_descriptor(struct libusb_bos_descriptor *bos) { int i; if (!bos) return; for (i = 0; i < bos->bNumDeviceCaps; i++) free(bos->dev_capability[i]); free(bos); } /** \ingroup desc * Get an USB 2.0 Extension descriptor * * \param ctx the context to operate on, or NULL for the default context * \param dev_cap Device Capability descriptor with a bDevCapabilityType of * \ref libusb_capability_type::LIBUSB_BT_USB_2_0_EXTENSION * LIBUSB_BT_USB_2_0_EXTENSION * \param usb_2_0_extension output location for the USB 2.0 Extension * descriptor. Only valid if 0 was returned. Must be freed with * libusb_free_usb_2_0_extension_descriptor() after use. * \returns 0 on success * \returns a LIBUSB_ERROR code on error */ int API_EXPORTED libusb_get_usb_2_0_extension_descriptor( struct libusb_context *ctx, struct libusb_bos_dev_capability_descriptor *dev_cap, struct libusb_usb_2_0_extension_descriptor **usb_2_0_extension) { struct libusb_usb_2_0_extension_descriptor *_usb_2_0_extension; const int host_endian = 0; if (dev_cap->bDevCapabilityType != LIBUSB_BT_USB_2_0_EXTENSION) { usbi_err(ctx, "unexpected bDevCapabilityType %x (expected %x)", dev_cap->bDevCapabilityType, LIBUSB_BT_USB_2_0_EXTENSION); return LIBUSB_ERROR_INVALID_PARAM; } if (dev_cap->bLength < LIBUSB_BT_USB_2_0_EXTENSION_SIZE) { usbi_err(ctx, "short dev-cap descriptor read %d/%d", dev_cap->bLength, LIBUSB_BT_USB_2_0_EXTENSION_SIZE); return LIBUSB_ERROR_IO; } _usb_2_0_extension = malloc(sizeof(*_usb_2_0_extension)); if (!_usb_2_0_extension) return LIBUSB_ERROR_NO_MEM; usbi_parse_descriptor((unsigned char *)dev_cap, "bbbd", _usb_2_0_extension, host_endian); *usb_2_0_extension = _usb_2_0_extension; return LIBUSB_SUCCESS; } /** \ingroup desc * Free a USB 2.0 Extension descriptor obtained from * libusb_get_usb_2_0_extension_descriptor(). * It is safe to call this function with a NULL usb_2_0_extension parameter, * in which case the function simply returns. * * \param usb_2_0_extension the USB 2.0 Extension descriptor to free */ void API_EXPORTED libusb_free_usb_2_0_extension_descriptor( struct libusb_usb_2_0_extension_descriptor *usb_2_0_extension) { free(usb_2_0_extension); } /** \ingroup desc * Get a SuperSpeed USB Device Capability descriptor * * \param ctx the context to operate on, or NULL for the default context * \param dev_cap Device Capability descriptor with a bDevCapabilityType of * \ref libusb_capability_type::LIBUSB_BT_SS_USB_DEVICE_CAPABILITY * LIBUSB_BT_SS_USB_DEVICE_CAPABILITY * \param ss_usb_device_cap output location for the SuperSpeed USB Device * Capability descriptor. Only valid if 0 was returned. Must be freed with * libusb_free_ss_usb_device_capability_descriptor() after use. * \returns 0 on success * \returns a LIBUSB_ERROR code on error */ int API_EXPORTED libusb_get_ss_usb_device_capability_descriptor( struct libusb_context *ctx, struct libusb_bos_dev_capability_descriptor *dev_cap, struct libusb_ss_usb_device_capability_descriptor **ss_usb_device_cap) { struct libusb_ss_usb_device_capability_descriptor *_ss_usb_device_cap; const int host_endian = 0; if (dev_cap->bDevCapabilityType != LIBUSB_BT_SS_USB_DEVICE_CAPABILITY) { usbi_err(ctx, "unexpected bDevCapabilityType %x (expected %x)", dev_cap->bDevCapabilityType, LIBUSB_BT_SS_USB_DEVICE_CAPABILITY); return LIBUSB_ERROR_INVALID_PARAM; } if (dev_cap->bLength < LIBUSB_BT_SS_USB_DEVICE_CAPABILITY_SIZE) { usbi_err(ctx, "short dev-cap descriptor read %d/%d", dev_cap->bLength, LIBUSB_BT_SS_USB_DEVICE_CAPABILITY_SIZE); return LIBUSB_ERROR_IO; } _ss_usb_device_cap = malloc(sizeof(*_ss_usb_device_cap)); if (!_ss_usb_device_cap) return LIBUSB_ERROR_NO_MEM; usbi_parse_descriptor((unsigned char *)dev_cap, "bbbbwbbw", _ss_usb_device_cap, host_endian); *ss_usb_device_cap = _ss_usb_device_cap; return LIBUSB_SUCCESS; } /** \ingroup desc * Free a SuperSpeed USB Device Capability descriptor obtained from * libusb_get_ss_usb_device_capability_descriptor(). * It is safe to call this function with a NULL ss_usb_device_cap * parameter, in which case the function simply returns. * * \param ss_usb_device_cap the USB 2.0 Extension descriptor to free */ void API_EXPORTED libusb_free_ss_usb_device_capability_descriptor( struct libusb_ss_usb_device_capability_descriptor *ss_usb_device_cap) { free(ss_usb_device_cap); } /** \ingroup desc * Get a Container ID descriptor * * \param ctx the context to operate on, or NULL for the default context * \param dev_cap Device Capability descriptor with a bDevCapabilityType of * \ref libusb_capability_type::LIBUSB_BT_CONTAINER_ID * LIBUSB_BT_CONTAINER_ID * \param container_id output location for the Container ID descriptor. * Only valid if 0 was returned. Must be freed with * libusb_free_container_id_descriptor() after use. * \returns 0 on success * \returns a LIBUSB_ERROR code on error */ int API_EXPORTED libusb_get_container_id_descriptor(struct libusb_context *ctx, struct libusb_bos_dev_capability_descriptor *dev_cap, struct libusb_container_id_descriptor **container_id) { struct libusb_container_id_descriptor *_container_id; const int host_endian = 0; if (dev_cap->bDevCapabilityType != LIBUSB_BT_CONTAINER_ID) { usbi_err(ctx, "unexpected bDevCapabilityType %x (expected %x)", dev_cap->bDevCapabilityType, LIBUSB_BT_CONTAINER_ID); return LIBUSB_ERROR_INVALID_PARAM; } if (dev_cap->bLength < LIBUSB_BT_CONTAINER_ID_SIZE) { usbi_err(ctx, "short dev-cap descriptor read %d/%d", dev_cap->bLength, LIBUSB_BT_CONTAINER_ID_SIZE); return LIBUSB_ERROR_IO; } _container_id = malloc(sizeof(*_container_id)); if (!_container_id) return LIBUSB_ERROR_NO_MEM; usbi_parse_descriptor((unsigned char *)dev_cap, "bbbbu", _container_id, host_endian); *container_id = _container_id; return LIBUSB_SUCCESS; } /** \ingroup desc * Free a Container ID descriptor obtained from * libusb_get_container_id_descriptor(). * It is safe to call this function with a NULL container_id parameter, * in which case the function simply returns. * * \param container_id the USB 2.0 Extension descriptor to free */ void API_EXPORTED libusb_free_container_id_descriptor( struct libusb_container_id_descriptor *container_id) { free(container_id); } /** \ingroup desc * Retrieve a string descriptor in C style ASCII. * * Wrapper around libusb_get_string_descriptor(). Uses the first language * supported by the device. * * \param dev a device handle * \param desc_index the index of the descriptor to retrieve * \param data output buffer for ASCII string descriptor * \param length size of data buffer * \returns number of bytes returned in data, or LIBUSB_ERROR code on failure */ int API_EXPORTED libusb_get_string_descriptor_ascii(libusb_device_handle *dev, uint8_t desc_index, unsigned char *data, int length) { unsigned char tbuf[255]; /* Some devices choke on size > 255 */ int r, si, di; uint16_t langid; /* Asking for the zero'th index is special - it returns a string * descriptor that contains all the language IDs supported by the * device. Typically there aren't many - often only one. Language * IDs are 16 bit numbers, and they start at the third byte in the * descriptor. There's also no point in trying to read descriptor 0 * with this function. See USB 2.0 specification section 9.6.7 for * more information. */ if (desc_index == 0) return LIBUSB_ERROR_INVALID_PARAM; r = libusb_get_string_descriptor(dev, 0, 0, tbuf, sizeof(tbuf)); if (r < 0) return r; if (r < 4) return LIBUSB_ERROR_IO; langid = tbuf[2] | (tbuf[3] << 8); r = libusb_get_string_descriptor(dev, desc_index, langid, tbuf, sizeof(tbuf)); if (r < 0) return r; if (tbuf[1] != LIBUSB_DT_STRING) return LIBUSB_ERROR_IO; if (tbuf[0] > r) return LIBUSB_ERROR_IO; for (di = 0, si = 2; si < tbuf[0]; si += 2) { if (di >= (length - 1)) break; if ((tbuf[si] & 0x80) || (tbuf[si + 1])) /* non-ASCII */ data[di++] = '?'; else data[di++] = tbuf[si]; } data[di] = 0; return di; }