Imported Upstream version 5.8.4upstream/5.8.4

64 files changed, 1936 insertions, 3087 deletions

diff --git a/ChangeLog b/ChangeLog
index f361759..74fc007 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,4 +1,13 @@
 ---------------------------------------------------------------------------
+Version 5.8.4  [V5-stable] (al), 2011-08-10
+- bugfix: potential misadressing in property replacer
+- bugfix: memcpy overflow can occur in allowed sender checkig
+  if a name is resolved to IPv4-mapped-on-IPv6 address
+  Found by Ismail Dönmez at suse
+- bugfix: potential misadressing in property replacer
+- bugfix: MSGID corruption in RFC5424 parser under some circumstances
+  closes: http://bugzilla.adiscon.com/show_bug.cgi?id=275
+---------------------------------------------------------------------------
 Version 5.8.3  [V5-stable] (rgerhards), 2011-07-11
 - systemd support: set stdout/stderr to null - thx to Lennart for the patch
 - added support for the ":omusrmsg:" syntax in configuring user messages
@@ -852,6 +861,12 @@ Version 4.7.0  [v4-devel] (rgerhards), 2010-04-14
   Thanks for varmojfekoj for pointing me at this bug.
 - imported changes from 4.5.6 and below
 ---------------------------------------------------------------------------
+Version 4.6.8  [v4-stable] (rgerhards), 2011-??-??
+- bugfix: potential misadressing in property replacer
+- bugfix: memcpy overflow can occur in allowed sender checkig
+  if a name is resolved to IPv4-mapped-on-IPv6 address
+  Found by Ismail Dönmez at suse
+---------------------------------------------------------------------------
 Version 4.6.7  [v4-stable] (rgerhards), 2011-07-11
 - added support for the ":omusrmsg:" syntax in configuring user messages
 - added support for the ":omfile:" syntax in configuring user messages
@@ -1557,6 +1572,7 @@ Version 3.22.4 [v3-stable] (rgerhards), 2010-??-??
   offset
   closes: http://bugzilla.adiscon.com/show_bug.cgi?id=271
 - improved some code based on clang static analyzer results
+- bugfix: potential misadressing in property replacer
 ---------------------------------------------------------------------------
 Version 3.22.3 [v3-stable] (rgerhards), 2010-11-24
 - bugfix(important): problem in TLS handling could cause rsyslog to loop
diff --git a/Makefile.in b/Makefile.in
index d64cb83..b0cfd26 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -82,7 +82,7 @@ DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
 	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
 	$(top_srcdir)/configure AUTHORS COPYING COPYING.LESSER \
 	ChangeLog INSTALL NEWS compile config.guess config.sub depcomp \
-	install-sh ltmain.sh missing ylwrap
+	install-sh ltmain.sh missing
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/atomic_operations.m4 \
 	$(top_srcdir)/m4/atomic_operations_64bit.m4 \
@@ -381,6 +381,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/aclocal.m4 b/aclocal.m4
index b383d57..f186fa9 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -13,8 +13,8 @@
 
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.66],,
-[m4_warning([this file was generated for autoconf 2.66.
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.67],,
+[m4_warning([this file was generated for autoconf 2.67.
 You have another version of autoconf.  It may work, but is not guaranteed to.
 If you have problems, you may need to regenerate the build system entirely.
 To do so, use the procedure documented by the package, typically `autoreconf'.])])
@@ -156,7 +156,7 @@ $$1_PKG_ERRORS
 Consider adjusting the PKG_CONFIG_PATH environment variable if you
 installed software in a non-standard prefix.
 
-_PKG_TEXT])
+_PKG_TEXT])[]dnl
         ])
 elif test $pkg_failed = untried; then
      	AC_MSG_RESULT([no])
@@ -167,7 +167,7 @@ path to pkg-config.
 
 _PKG_TEXT
 
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.])
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
         ])
 else
 	$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
diff --git a/config.guess b/config.guess
index dc84c68..c2246a4 100755
--- a/config.guess
+++ b/config.guess
@@ -1,10 +1,10 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
 #   Free Software Foundation, Inc.
 
-timestamp='2009-11-20'
+timestamp='2009-12-30'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -56,8 +56,9 @@ version="\
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free
+Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
diff --git a/config.sub b/config.sub
index 2a55a50..c2d1257 100755
--- a/config.sub
+++ b/config.sub
@@ -1,10 +1,10 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
 #   Free Software Foundation, Inc.
 
-timestamp='2009-11-20'
+timestamp='2010-01-22'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -75,8 +75,9 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free
+Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -380,7 +381,8 @@ case $basic_machine in
 	| sparclite-* \
 	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
 	| tahoe-* | thumb-* \
-	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tile-* | tilegx-* \
 	| tron-* \
 	| ubicom32-* \
 	| v850-* | v850e-* | vax-* \
@@ -1085,6 +1087,11 @@ case $basic_machine in
 		basic_machine=tic6x-unknown
 		os=-coff
 		;;
+        # This must be matched before tile*.
+        tilegx*)
+		basic_machine=tilegx-unknown
+		os=-linux-gnu
+		;;
 	tile*)
 		basic_machine=tile-unknown
 		os=-linux-gnu
@@ -1435,6 +1442,8 @@ case $os in
 	-dicos*)
 		os=-dicos
 		;;
+        -nacl*)
+	        ;;
 	-none)
 		;;
 	*)
diff --git a/configure b/configure
index 1b97fba..a0912ec 100755
--- a/configure
+++ b/configure
@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.66 for rsyslog 5.8.3.
+# Generated by GNU Autoconf 2.67 for rsyslog 5.8.4.
 #
 # Report bugs to <rsyslog@lists.adiscon.com>.
 #
@@ -173,15 +173,7 @@ test x\$exitcode = x0 || exit 1"
   as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
   eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
   test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
-test \$(( 1 + 1 )) = 2 || exit 1
-
-  test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
-    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
-    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
-    PATH=/empty FPATH=/empty; export PATH FPATH
-    test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
-      || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1"
+test \$(( 1 + 1 )) = 2 || exit 1"
   if (eval "$as_required") 2>/dev/null; then :
   as_have_required=yes
 else
@@ -536,8 +528,155 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
 # Sed expression to map a string onto a valid variable name.
 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
+
+
+# Check that we are running under the correct shell.
 SHELL=${CONFIG_SHELL-/bin/sh}
 
+case X$lt_ECHO in
+X*--fallback-echo)
+  # Remove one level of quotation (which was required for Make).
+  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','`
+  ;;
+esac
+
+ECHO=${lt_ECHO-echo}
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+  # Yippee, $ECHO works!
+  :
+else
+  # Restart under the correct shell.
+  exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<_LT_EOF
+$*
+_LT_EOF
+  exit 0
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test -z "$lt_ECHO"; then
+  if test "X${echo_test_string+set}" != Xset; then
+    # find a string as large as possible, as long as the shell can cope with it
+    for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+	 { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+      then
+        break
+      fi
+    done
+  fi
+
+  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+     test "X$echo_testing_string" = "X$echo_test_string"; then
+    :
+  else
+    # The Solaris, AIX, and Digital Unix default echo programs unquote
+    # backslashes.  This makes it impossible to quote backslashes using
+    #   echo "$something" | sed 's/\\/\\\\/g'
+    #
+    # So, first we look for a working echo in the user's PATH.
+
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for dir in $PATH /usr/ucb; do
+      IFS="$lt_save_ifs"
+      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        ECHO="$dir/echo"
+        break
+      fi
+    done
+    IFS="$lt_save_ifs"
+
+    if test "X$ECHO" = Xecho; then
+      # We didn't find a better echo, so look for alternatives.
+      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        # This shell has a builtin print -r that does the trick.
+        ECHO='print -r'
+      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+	   test "X$CONFIG_SHELL" != X/bin/ksh; then
+        # If we have ksh, try running configure again with it.
+        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+        export ORIGINAL_CONFIG_SHELL
+        CONFIG_SHELL=/bin/ksh
+        export CONFIG_SHELL
+        exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
+      else
+        # Try using printf.
+        ECHO='printf %s\n'
+        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+	   echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	  # Cool, printf works
+	  :
+        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	  export CONFIG_SHELL
+	  SHELL="$CONFIG_SHELL"
+	  export SHELL
+	  ECHO="$CONFIG_SHELL $0 --fallback-echo"
+        elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  ECHO="$CONFIG_SHELL $0 --fallback-echo"
+        else
+	  # maybe with a smaller string...
+	  prev=:
+
+	  for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+	    if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+	    then
+	      break
+	    fi
+	    prev="$cmd"
+	  done
+
+	  if test "$prev" != 'sed 50q "$0"'; then
+	    echo_test_string=`eval $prev`
+	    export echo_test_string
+	    exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
+	  else
+	    # Oops.  We lost completely, so just stick with echo.
+	    ECHO=echo
+	  fi
+        fi
+      fi
+    fi
+  fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+   lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
+fi
+
+
+
 
 test -n "$DJDIR" || exec 7<&0 </dev/null
 exec 6>&1
@@ -562,8 +701,8 @@ MAKEFLAGS=
 # Identity of this package.
 PACKAGE_NAME='rsyslog'
 PACKAGE_TARNAME='rsyslog'
-PACKAGE_VERSION='5.8.3'
-PACKAGE_STRING='rsyslog 5.8.3'
+PACKAGE_VERSION='5.8.4'
+PACKAGE_STRING='rsyslog 5.8.4'
 PACKAGE_BUGREPORT='rsyslog@lists.adiscon.com'
 PACKAGE_URL=''
 
@@ -745,6 +884,7 @@ OTOOL
 LIPO
 NMEDIT
 DSYMUTIL
+lt_ECHO
 RANLIB
 AR
 OBJDUMP
@@ -996,8 +1136,9 @@ do
   fi
 
   case $ac_option in
-  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
-  *)	ac_optarg=yes ;;
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
   esac
 
   # Accept the important Cygnus configure options, so we can diagnose typos.
@@ -1475,7 +1616,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures rsyslog 5.8.3 to adapt to many kinds of systems.
+\`configure' configures rsyslog 5.8.4 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1545,7 +1686,7 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of rsyslog 5.8.3:";;
+     short | recursive ) echo "Configuration of rsyslog 5.8.4:";;
    esac
   cat <<\_ACEOF
 
@@ -1720,8 +1861,8 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-rsyslog configure 5.8.3
-generated by GNU Autoconf 2.66
+rsyslog configure 5.8.4
+generated by GNU Autoconf 2.67
 
 Copyright (C) 2010 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
@@ -1793,7 +1934,7 @@ $as_echo "$ac_try_echo"; } >&5
     mv -f conftest.er1 conftest.err
   fi
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
-  test $ac_status = 0; } >/dev/null && {
+  test $ac_status = 0; } > conftest.i && {
 	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
 	 test ! -s conftest.err
        }; then :
@@ -1856,7 +1997,7 @@ if ac_fn_c_try_cpp "$LINENO"; then :
 else
   ac_header_preproc=no
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
 $as_echo "$ac_header_preproc" >&6; }
 
@@ -2299,8 +2440,8 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by rsyslog $as_me 5.8.3, which was
-generated by GNU Autoconf 2.66.  Invocation command line was
+It was created by rsyslog $as_me 5.8.4, which was
+generated by GNU Autoconf 2.67.  Invocation command line was
 
   $ $0 $@
 
@@ -2558,7 +2699,7 @@ $as_echo "$as_me: loading site script $ac_site_file" >&6;}
       || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "failed to load site script $ac_site_file
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
   fi
 done
 
@@ -2782,11 +2923,11 @@ am_lf='
 '
 case `pwd` in
   *[\\\"\#\$\&\'\`$am_lf]*)
-    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5 ;;
 esac
 case $srcdir in
   *[\\\"\#\$\&\'\`$am_lf\ \	]*)
-    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5 ;;
 esac
 
 # Do `set' in a subshell so we don't clobber the current shell's
@@ -3114,7 +3255,7 @@ fi
 
 # Define the identity of the package.
  PACKAGE='rsyslog'
- VERSION='5.8.3'
+ VERSION='5.8.4'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -3536,7 +3677,7 @@ fi
 test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 
 # Provide some information about the compiler.
 $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
@@ -3651,7 +3792,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error 77 "C compiler cannot create executables
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 else
   { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
@@ -3694,7 +3835,7 @@ else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 fi
 rm -f conftest conftest$ac_cv_exeext
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
@@ -3753,7 +3894,7 @@ $as_echo "$ac_try_echo"; } >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "cannot run C compiled programs.
 If you meant to cross compile, use \`--host'.
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
     fi
   fi
 fi
@@ -3805,7 +3946,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 fi
 rm -f conftest.$ac_cv_objext conftest.$ac_ext
 fi
@@ -4195,7 +4336,7 @@ else
   # Broken: fails on valid input.
 continue
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
   # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
@@ -4211,11 +4352,11 @@ else
 ac_preproc_ok=:
 break
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
 done
 # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.i conftest.err conftest.$ac_ext
 if $ac_preproc_ok; then :
   break
 fi
@@ -4254,7 +4395,7 @@ else
   # Broken: fails on valid input.
 continue
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
   # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
@@ -4270,18 +4411,18 @@ else
 ac_preproc_ok=:
 break
 fi
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.err conftest.i conftest.$ac_ext
 
 done
 # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
+rm -f conftest.i conftest.err conftest.$ac_ext
 if $ac_preproc_ok; then :
 
 else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 fi
 
 ac_ext=c
@@ -5005,7 +5146,7 @@ fi
 test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 
 # Provide some information about the compiler.
 $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
@@ -5539,8 +5680,8 @@ esac
 
 
 
-macro_version='2.2.10'
-macro_revision='1.3175'
+macro_version='2.2.6b'
+macro_revision='1.3017'
 
 
 
@@ -5578,7 +5719,7 @@ fi
 $as_echo "$ac_cv_build" >&6; }
 case $ac_cv_build in
 *-*-*) ;;
-*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5 ;;
 esac
 build=$ac_cv_build
 ac_save_IFS=$IFS; IFS='-'
@@ -5611,7 +5752,7 @@ fi
 $as_echo "$ac_cv_host" >&6; }
 case $ac_cv_host in
 *-*-*) ;;
-*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5 ;;
 esac
 host=$ac_cv_host
 ac_save_IFS=$IFS; IFS='-'
@@ -5627,75 +5768,6 @@ IFS=$ac_save_IFS
 case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
 
 
-# Backslashify metacharacters that are still active within
-# double-quoted strings.
-sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
-$as_echo_n "checking how to print strings... " >&6; }
-# Test print first, because it will be a builtin if present.
-if test "X`print -r -- -n 2>/dev/null`" = X-n && \
-   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
-  ECHO='print -r --'
-elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
-  ECHO='printf %s\n'
-else
-  # Use this function as a fallback that always works.
-  func_fallback_echo ()
-  {
-    eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
-  }
-  ECHO='func_fallback_echo'
-fi
-
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
-    $ECHO ""
-}
-
-case "$ECHO" in
-  printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
-$as_echo "printf" >&6; } ;;
-  print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
-$as_echo "print -r" >&6; } ;;
-  *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
-$as_echo "cat" >&6; } ;;
-esac
-
-
-
-
-
-
-
-
-
-
-
-
-
-
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
 $as_echo_n "checking for a sed that does not truncate output... " >&6; }
 if test "${ac_cv_path_SED+set}" = set; then :
@@ -6031,11 +6103,8 @@ if test "$lt_cv_path_NM" != "no"; then
   NM="$lt_cv_path_NM"
 else
   # Didn't find any BSD compatible name lister, look for dumpbin.
-  if test -n "$DUMPBIN"; then :
-    # Let the user override the test.
-  else
-    if test -n "$ac_tool_prefix"; then
-  for ac_prog in dumpbin "link -dump"
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in "dumpbin -symbols" "link -dump -symbols"
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
@@ -6079,7 +6148,7 @@ fi
 fi
 if test -z "$DUMPBIN"; then
   ac_ct_DUMPBIN=$DUMPBIN
-  for ac_prog in dumpbin "link -dump"
+  for ac_prog in "dumpbin -symbols" "link -dump -symbols"
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
@@ -6134,15 +6203,6 @@ esac
   fi
 fi
 
-    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
-    *COFF*)
-      DUMPBIN="$DUMPBIN -symbols"
-      ;;
-    *)
-      DUMPBIN=:
-      ;;
-    esac
-  fi
 
   if test "$DUMPBIN" != ":"; then
     NM="$DUMPBIN"
@@ -6162,13 +6222,13 @@ if test "${lt_cv_nm_interface+set}" = set; then :
 else
   lt_cv_nm_interface="BSD nm"
   echo "int some_variable = 0;" > conftest.$ac_ext
-  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+  (eval echo "\"\$as_me:6225: $ac_compile\"" >&5)
   (eval "$ac_compile" 2>conftest.err)
   cat conftest.err >&5
-  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval echo "\"\$as_me:6228: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
   (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
   cat conftest.err >&5
-  (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+  (eval echo "\"\$as_me:6231: output\"" >&5)
   cat conftest.out >&5
   if $GREP 'External.*some_variable' conftest.out > /dev/null; then
     lt_cv_nm_interface="MS dumpbin"
@@ -6225,11 +6285,6 @@ else
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
-  mint*)
-    # On MiNT this can take a long time and run out of memory.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
   amigaos*)
     # On AmigaOS with pdksh, this test takes hours, literally.
     # So we just punt and use a minimum line length of 8192.
@@ -6294,8 +6349,8 @@ else
       # If test is not a shell built-in, we'll probably end up computing a
       # maximum length that is only half of the actual maximum length, but
       # we can't tell.
-      while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \
-	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+      while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+	         = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
 	      test $i != 17 # 1/2 MB should be enough
       do
         i=`expr $i + 1`
@@ -6566,18 +6621,16 @@ mingw* | pw32*)
   # Base MSYS/MinGW do not provide the 'file' command needed by
   # func_win32_libid shell function, so use a weaker test based on 'objdump',
   # unless we find 'file', for example because we are cross-compiling.
-  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
-  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+  if ( file / ) >/dev/null 2>&1; then
     lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
     lt_cv_file_magic_cmd='func_win32_libid'
   else
-    # Keep this pattern in sync with the one in func_win32_libid.
-    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
     lt_cv_file_magic_cmd='$OBJDUMP -f'
   fi
   ;;
 
-cegcc*)
+cegcc)
   # use the weaker test based on 'objdump'. See mingw*.
   lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
   lt_cv_file_magic_cmd='$OBJDUMP -f'
@@ -6607,10 +6660,6 @@ gnu*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-haiku*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
 hpux10.20* | hpux11*)
   lt_cv_file_magic_cmd=/usr/bin/file
   case $host_cpu in
@@ -6619,11 +6668,11 @@ hpux10.20* | hpux11*)
     lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
     ;;
   hppa*64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
     lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
     ;;
   *)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
     lt_cv_file_magic_test_file=/usr/lib/libc.sl
     ;;
   esac
@@ -6649,7 +6698,7 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-netbsd*)
+netbsd* | netbsdelf*-gnu)
   if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
   else
@@ -7061,18 +7110,6 @@ if test -n "$RANLIB"; then
   old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
 fi
 
-case $host_os in
-  darwin*)
-    lock_old_archive_extraction=yes ;;
-  *)
-    lock_old_archive_extraction=no ;;
-esac
-
-
-
-
-
-
 
 
 
@@ -7242,8 +7279,8 @@ _LT_EOF
   test $ac_status = 0; }; then
     # Now try to grab the symbols.
     nlist=conftest.nm
-    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
-  (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5
+  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; } && test -s "$nlist"; then
@@ -7396,7 +7433,7 @@ ia64-*-hpux*)
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  echo '#line 7436 "configure"' > conftest.$ac_ext
   if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -8108,38 +8145,6 @@ rm -f core conftest.err conftest.$ac_objext \
 fi
 { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
 $as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
-    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
-$as_echo_n "checking for -force_load linker flag... " >&6; }
-if test "${lt_cv_ld_force_load+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_ld_force_load=no
-      cat > conftest.c << _LT_EOF
-int forced_loaded() { return 2;}
-_LT_EOF
-      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
-      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
-      echo "$AR cru libconftest.a conftest.o" >&5
-      $AR cru libconftest.a conftest.o 2>&5
-      echo "$RANLIB libconftest.a" >&5
-      $RANLIB libconftest.a 2>&5
-      cat > conftest.c << _LT_EOF
-int main() { return 0;}
-_LT_EOF
-      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
-      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
-      _lt_result=$?
-      if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then
-	lt_cv_ld_force_load=yes
-      else
-	cat conftest.err >&5
-      fi
-        rm -f conftest.err libconftest.a conftest conftest.c
-        rm -rf conftest.dSYM
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
-$as_echo "$lt_cv_ld_force_load" >&6; }
     case $host_os in
     rhapsody* | darwin1.[012])
       _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
@@ -8167,7 +8172,7 @@ $as_echo "$lt_cv_ld_force_load" >&6; }
     else
       _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
     fi
-    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+    if test "$DSYMUTIL" != ":"; then
       _lt_dsymutil='~$DSYMUTIL $lib || :'
     else
       _lt_dsymutil=
@@ -8190,8 +8195,6 @@ done
 
 
 
-
-
 # Set options
 
 
@@ -8314,7 +8317,6 @@ LIBTOOL='$(SHELL) $(top_builddir)/libtool'
 
 
 
-
 test -z "$LN_S" && LN_S="ln -s"
 
 
@@ -8364,6 +8366,19 @@ _ACEOF
 
 
 
+
+
+
+
+
+
+
+
+
+
+
+
+
 case $host_os in
 aix3*)
   # AIX sometimes has problems with the GCC collect2 program.  For some
@@ -8376,6 +8391,23 @@ aix3*)
   ;;
 esac
 
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
 # Global variables:
 ofile=libtool
 can_build_shared=yes
@@ -8404,7 +8436,7 @@ for cc_temp in $compiler""; do
     *) break;;
   esac
 done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
 
 # Only perform the check for file, if the check method requires it
@@ -8613,12 +8645,7 @@ if test -n "$compiler"; then
 lt_prog_compiler_no_builtin_flag=
 
 if test "$GCC" = yes; then
-  case $cc_basename in
-  nvcc*)
-    lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
-  *)
-    lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
-  esac
+  lt_prog_compiler_no_builtin_flag=' -fno-builtin'
 
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
 $as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
@@ -8638,15 +8665,15 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:8668: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   echo "$as_me:8672: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
-     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_rtti_exceptions=yes
@@ -8724,12 +8751,6 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
       lt_prog_compiler_pic='-fno-common'
       ;;
 
-    haiku*)
-      # PIC is the default for Haiku.
-      # The "-static" flag exists, but is broken.
-      lt_prog_compiler_static=
-      ;;
-
     hpux*)
       # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
       # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
@@ -8772,13 +8793,6 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
       lt_prog_compiler_pic='-fPIC'
       ;;
     esac
-
-    case $cc_basename in
-    nvcc*) # Cuda Compiler Driver 2.2
-      lt_prog_compiler_wl='-Xlinker '
-      lt_prog_compiler_pic='-Xcompiler -fPIC'
-      ;;
-    esac
   else
     # PORTME Check for flag to pass linker flags through the system compiler.
     case $host_os in
@@ -8841,7 +8855,7 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
 	lt_prog_compiler_pic='--shared'
 	lt_prog_compiler_static='--static'
 	;;
-      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+      pgcc* | pgf77* | pgf90* | pgf95*)
         # Portland Group compilers (*not* the Pentium gcc compiler,
 	# which looks to be a dead project)
 	lt_prog_compiler_wl='-Wl,'
@@ -8853,26 +8867,26 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
         # All Alpha code is PIC.
         lt_prog_compiler_static='-non_shared'
         ;;
-      xl* | bgxl* | bgf* | mpixl*)
-	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+      xl*)
+	# IBM XL C 8.0/Fortran 10.1 on PPC
 	lt_prog_compiler_wl='-Wl,'
 	lt_prog_compiler_pic='-qpic'
 	lt_prog_compiler_static='-qstaticlink'
 	;;
       *)
 	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ F* | *Sun*Fortran*)
-	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-	  lt_prog_compiler_pic='-KPIC'
-	  lt_prog_compiler_static='-Bstatic'
-	  lt_prog_compiler_wl=''
-	  ;;
 	*Sun\ C*)
 	  # Sun C 5.9
 	  lt_prog_compiler_pic='-KPIC'
 	  lt_prog_compiler_static='-Bstatic'
 	  lt_prog_compiler_wl='-Wl,'
 	  ;;
+	*Sun\ F*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
 	esac
 	;;
       esac
@@ -8903,7 +8917,7 @@ $as_echo_n "checking for $compiler option to produce PIC... " >&6; }
       lt_prog_compiler_pic='-KPIC'
       lt_prog_compiler_static='-Bstatic'
       case $cc_basename in
-      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+      f77* | f90* | f95*)
 	lt_prog_compiler_wl='-Qoption ld ';;
       *)
 	lt_prog_compiler_wl='-Wl,';;
@@ -8990,15 +9004,15 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:9007: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   echo "$as_me:9011: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
-     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_pic_works=yes
@@ -9046,7 +9060,7 @@ else
      if test -s conftest.err; then
        # Append any errors to the config.log.
        cat conftest.err 1>&5
-       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
        if diff conftest.exp conftest.er2 >/dev/null; then
          lt_cv_prog_compiler_static_works=yes
@@ -9095,16 +9109,16 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:9112: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   echo "$as_me:9116: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_c_o=yes
@@ -9150,16 +9164,16 @@ else
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:9167: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   echo "$as_me:9171: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        lt_cv_prog_compiler_c_o=yes
@@ -9269,36 +9283,13 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
   openbsd*)
     with_gnu_ld=no
     ;;
+  linux* | k*bsd*-gnu)
+    link_all_deplibs=no
+    ;;
   esac
 
   ld_shlibs=yes
-
-  # On some targets, GNU ld is compatible enough with the native linker
-  # that we're better off using the native interface for both.
-  lt_use_gnu_ld_interface=no
   if test "$with_gnu_ld" = yes; then
-    case $host_os in
-      aix*)
-	# The AIX port of GNU ld has always aspired to compatibility
-	# with the native linker.  However, as the warning in the GNU ld
-	# block says, versions before 2.19.5* couldn't really create working
-	# shared libraries, regardless of the interface used.
-	case `$LD -v 2>&1` in
-	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
-	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
-	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
-	  *)
-	    lt_use_gnu_ld_interface=yes
-	    ;;
-	esac
-	;;
-      *)
-	lt_use_gnu_ld_interface=yes
-	;;
-    esac
-  fi
-
-  if test "$lt_use_gnu_ld_interface" = yes; then
     # If archive_cmds runs LD, not CC, wlarc should be empty
     wlarc='${wl}'
 
@@ -9332,12 +9323,11 @@ $as_echo_n "checking whether the $compiler linker ($LD) supports shared librarie
 	ld_shlibs=no
 	cat <<_LT_EOF 1>&2
 
-*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
 *** to be unable to reliably create shared libraries on AIX.
 *** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to install binutils
-*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
-*** You will then need to restart the configuration process.
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
 
 _LT_EOF
       fi
@@ -9373,7 +9363,6 @@ _LT_EOF
       # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
       # as there is no search path for DLLs.
       hardcode_libdir_flag_spec='-L$libdir'
-      export_dynamic_flag_spec='${wl}--export-all-symbols'
       allow_undefined_flag=unsupported
       always_export_symbols=no
       enable_shared_with_static_runtimes=yes
@@ -9395,11 +9384,6 @@ _LT_EOF
       fi
       ;;
 
-    haiku*)
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      link_all_deplibs=yes
-      ;;
-
     interix[3-9]*)
       hardcode_direct=no
       hardcode_shlibpath_var=no
@@ -9429,12 +9413,11 @@ _LT_EOF
 	tmp_sharedflag='-shared'
 	case $cc_basename,$host_cpu in
         pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag'
 	  ;;
-	pgf77* | pgf90* | pgf95* | pgfortran*)
-					# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag -Mnomain' ;;
 	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
 	  tmp_addflag=' -i_dynamic' ;;
@@ -9445,17 +9428,13 @@ _LT_EOF
 	lf95*)				# Lahey Fortran 8.1
 	  whole_archive_flag_spec=
 	  tmp_sharedflag='--shared' ;;
-	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	xl[cC]*)			# IBM XL C 8.0 on PPC (deal with xlf below)
 	  tmp_sharedflag='-qmkshrobj'
 	  tmp_addflag= ;;
-	nvcc*)	# Cuda Compiler Driver 2.2
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
-	  compiler_needs_object=yes
-	  ;;
 	esac
 	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ C*)			# Sun C 5.9
-	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	  compiler_needs_object=yes
 	  tmp_sharedflag='-G' ;;
 	*Sun\ F*)			# Sun Fortran 8.3
@@ -9471,17 +9450,17 @@ _LT_EOF
         fi
 
 	case $cc_basename in
-	xlf* | bgf* | bgxlf* | mpixlf*)
+	xlf*)
 	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
 	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
 	  hardcode_libdir_flag_spec=
 	  hardcode_libdir_flag_spec_ld='-rpath $libdir'
-	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
 	  if test "x$supports_anon_versioning" = xyes; then
 	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
 	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
 	      echo "local: *; };" >> $output_objdir/$libname.ver~
-	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	      $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
 	  fi
 	  ;;
 	esac
@@ -9490,7 +9469,7 @@ _LT_EOF
       fi
       ;;
 
-    netbsd*)
+    netbsd* | netbsdelf*-gnu)
       if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
@@ -9602,10 +9581,8 @@ _LT_EOF
       else
 	# If we're using GNU nm, then we don't want the "-C" option.
 	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	# Also, AIX nm treats weak defined symbols like other global
-	# defined symbols, whereas GNU nm marks them as "W".
 	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	else
 	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	fi
@@ -9667,6 +9644,7 @@ _LT_EOF
 	if test "$aix_use_runtimelinking" = yes; then
 	  shared_flag="$shared_flag "'${wl}-G'
 	fi
+	link_all_deplibs=no
       else
 	# not using gcc
 	if test "$host_cpu" = ia64; then
@@ -9723,7 +9701,7 @@ rm -f core conftest.err conftest.$ac_objext \
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
         hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
       else
 	if test "$host_cpu" = ia64; then
 	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
@@ -9767,13 +9745,8 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	  # -berok will link without error, but may produce a broken library.
 	  no_undefined_flag=' ${wl}-bernotok'
 	  allow_undefined_flag=' ${wl}-berok'
-	  if test "$with_gnu_ld" = yes; then
-	    # We only use this code for GNU lds that support --whole-archive.
-	    whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	  else
-	    # Exported symbols can be pulled into shared objects from archives
-	    whole_archive_flag_spec='$convenience'
-	  fi
+	  # Exported symbols can be pulled into shared objects from archives
+	  whole_archive_flag_spec='$convenience'
 	  archive_cmds_need_lc=yes
 	  # This is similar to how AIX traditionally builds its shared libraries.
 	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
@@ -9812,7 +9785,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       # Tell ltmain to make .dll files, not .so files.
       shrext_cmds=".dll"
       # FIXME: Setting linknames here is a bad hack.
-      archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+      archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
       # The linker will automatically build a .lib file if we build a DLL.
       old_archive_from_new_cmds='true'
       # FIXME: Should let the user specify the lib program.
@@ -9828,11 +9801,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
   hardcode_direct=no
   hardcode_automatic=yes
   hardcode_shlibpath_var=unsupported
-  if test "$lt_cv_ld_force_load" = "yes"; then
-    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
-  else
-    whole_archive_flag_spec=''
-  fi
+  whole_archive_flag_spec=''
   link_all_deplibs=yes
   allow_undefined_flag="$_lt_dar_allow_undefined"
   case $cc_basename in
@@ -9840,7 +9809,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
      *) _lt_dar_can_shared=$GCC ;;
   esac
   if test "$_lt_dar_can_shared" = "yes"; then
-    output_verbose_link_cmd=func_echo_all
+    output_verbose_link_cmd=echo
     archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
     module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
     archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
@@ -9906,7 +9875,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ;;
 
     hpux10*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
 	archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
       else
 	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
@@ -9925,7 +9894,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       ;;
 
     hpux11*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
 	case $host_cpu in
 	hppa*64*)
 	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
@@ -9946,46 +9915,7 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-
-	  # Older versions of the 11.00 compiler do not understand -b yet
-	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
-	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
-$as_echo_n "checking if $CC understands -b... " >&6; }
-if test "${lt_cv_prog_compiler__b+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler__b=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS -b"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_cv_prog_compiler__b=yes
-       fi
-     else
-       lt_cv_prog_compiler__b=yes
-     fi
-   fi
-   $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
-$as_echo "$lt_cv_prog_compiler__b" >&6; }
-
-if test x"$lt_cv_prog_compiler__b" = xyes; then
-    archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-else
-    archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-fi
-
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       fi
@@ -10013,7 +9943,7 @@ fi
 
     irix5* | irix6* | nonstopux*)
       if test "$GCC" = yes; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	# Try to use the -exported_symbol ld option, if it does not
 	# work, assume that -exports_file does not work either and
 	# implicitly export all symbols.
@@ -10024,15 +9954,15 @@ fi
 int foo(void) {}
 _ACEOF
 if ac_fn_c_try_link "$LINENO"; then :
-  archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+  archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
 
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
         LDFLAGS="$save_LDFLAGS"
       else
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
       fi
       archive_cmds_need_lc='no'
       hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
@@ -10041,7 +9971,7 @@ rm -f core conftest.err conftest.$ac_objext \
       link_all_deplibs=yes
       ;;
 
-    netbsd*)
+    netbsd* | netbsdelf*-gnu)
       if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
       else
@@ -10094,17 +10024,17 @@ rm -f core conftest.err conftest.$ac_objext \
       hardcode_libdir_flag_spec='-L$libdir'
       hardcode_minus_L=yes
       allow_undefined_flag=unsupported
-      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
       old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
       ;;
 
     osf3*)
       if test "$GCC" = yes; then
 	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
       else
 	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
       fi
       archive_cmds_need_lc='no'
       hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
@@ -10114,13 +10044,13 @@ rm -f core conftest.err conftest.$ac_objext \
     osf4* | osf5*)	# as osf3* with the addition of -msym flag
       if test "$GCC" = yes; then
 	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
       else
 	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
 	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	hardcode_libdir_flag_spec='-rpath $libdir'
@@ -10323,50 +10253,44 @@ x|xyes)
       # to ld, don't add -lc before -lgcc.
       { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
 $as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
-if test "${lt_cv_archive_cmds_need_lc+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  $RM conftest*
-	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+      $RM conftest*
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+      if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; } 2>conftest.err; then
-	  soname=conftest
-	  lib=conftest
-	  libobjs=conftest.$ac_objext
-	  deplibs=
-	  wl=$lt_prog_compiler_wl
-	  pic_flag=$lt_prog_compiler_pic
-	  compiler_flags=-v
-	  linker_flags=-v
-	  verstring=
-	  output_objdir=.
-	  libname=conftest
-	  lt_save_allow_undefined_flag=$allow_undefined_flag
-	  allow_undefined_flag=
-	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$lt_prog_compiler_wl
+	pic_flag=$lt_prog_compiler_pic
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$allow_undefined_flag
+        allow_undefined_flag=
+        if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
   (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }
-	  then
-	    lt_cv_archive_cmds_need_lc=no
-	  else
-	    lt_cv_archive_cmds_need_lc=yes
-	  fi
-	  allow_undefined_flag=$lt_save_allow_undefined_flag
-	else
-	  cat conftest.err 1>&5
-	fi
-	$RM conftest*
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
-$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
-      archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+        then
+	  archive_cmds_need_lc=no
+        else
+	  archive_cmds_need_lc=yes
+        fi
+        allow_undefined_flag=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $RM conftest*
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5
+$as_echo "$archive_cmds_need_lc" >&6; }
       ;;
     esac
   fi
@@ -10537,23 +10461,16 @@ if test "$GCC" = yes; then
     darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
     *) lt_awk_arg="/^libraries:/" ;;
   esac
-  case $host_os in
-    mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
-    *) lt_sed_strip_eq="s,=/,/,g" ;;
-  esac
-  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
-  case $lt_search_path_spec in
-  *\;*)
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
     # if the path contains ";" then we assume it to be the separator
     # otherwise default to the standard path separator (i.e. ":") - it is
     # assumed that no part of a normal pathname contains ";" but that should
     # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
-    ;;
-  *)
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
-    ;;
-  esac
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
   # Ok, now we have the path, separated by spaces, we can step through it
   # and add multilib dir if necessary.
   lt_tmp_lt_search_path_spec=
@@ -10566,7 +10483,7 @@ if test "$GCC" = yes; then
 	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
     fi
   done
-  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
 BEGIN {RS=" "; FS="/|\n";} {
   lt_foo="";
   lt_count=0;
@@ -10586,13 +10503,7 @@ BEGIN {RS=" "; FS="/|\n";} {
   if (lt_foo != "") { lt_freq[lt_foo]++; }
   if (lt_freq[lt_foo] == 1) { print lt_foo; }
 }'`
-  # AWK program above erroneously prepends '/' to C:/dos/paths
-  # for these hosts.
-  case $host_os in
-    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
-      $SED 's,/\([A-Za-z]:\),\1,g'` ;;
-  esac
-  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
 else
   sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
 fi
@@ -10680,7 +10591,7 @@ amigaos*)
   m68k)
     library_names_spec='$libname.ixlibrary $libname.a'
     # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
     ;;
   esac
   ;;
@@ -10733,12 +10644,23 @@ cygwin* | mingw* | pw32* | cegcc*)
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-
-      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
       ;;
     mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
       soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
@@ -10838,19 +10760,6 @@ gnu*)
   hardcode_into_libs=yes
   ;;
 
-haiku*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  dynamic_linker="$host_os runtime_loader"
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
-  hardcode_into_libs=yes
-  ;;
-
 hpux9* | hpux10* | hpux11*)
   # Give a soname corresponding to the major version so that dld.sl refuses to
   # link against other versions.
@@ -10893,10 +10802,8 @@ hpux9* | hpux10* | hpux11*)
     soname_spec='${libname}${release}${shared_ext}$major'
     ;;
   esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
   postinstall_cmds='chmod 555 $lib'
-  # or fails outright, so override atomically:
-  install_override_mode=555
   ;;
 
 interix[3-9]*)
@@ -10963,17 +10870,12 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
-
   # Some binutils ld are patched to set DT_RUNPATH
-  if test "${lt_cv_shlibpath_overrides_runpath+set}" = set; then :
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_shlibpath_overrides_runpath=no
-    save_LDFLAGS=$LDFLAGS
-    save_libdir=$libdir
-    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
-	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
-    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+  save_LDFLAGS=$LDFLAGS
+  save_libdir=$libdir
+  eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+       LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -10986,31 +10888,23 @@ main ()
 _ACEOF
 if ac_fn_c_try_link "$LINENO"; then :
   if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
-  lt_cv_shlibpath_overrides_runpath=yes
+  shlibpath_overrides_runpath=yes
 fi
 fi
 rm -f core conftest.err conftest.$ac_objext \
     conftest$ac_exeext conftest.$ac_ext
-    LDFLAGS=$save_LDFLAGS
-    libdir=$save_libdir
-
-fi
-
-  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+  LDFLAGS=$save_LDFLAGS
+  libdir=$save_libdir
 
   # This implies no fast_install, which is unacceptable.
   # Some rework will be needed to allow for fast_install
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # Add ABI-specific directories to the system library path.
-  sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
-
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
-
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
   fi
 
   # We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -11022,6 +10916,18 @@ fi
   dynamic_linker='GNU/Linux ld.so'
   ;;
 
+netbsdelf*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='NetBSD ld.elf_so'
+  ;;
+
 netbsd*)
   version_type=sunos
   need_lib_prefix=no
@@ -11312,11 +11218,6 @@ fi
 
 
 
-
-
-
-
-
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
 $as_echo_n "checking how to hardcode library paths into programs... " >&6; }
 hardcode_action=
@@ -11647,7 +11548,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line $LINENO "configure"
+#line 11551 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11688,13 +11589,7 @@ else
 #  endif
 #endif
 
-/* When -fvisbility=hidden is used, assume the code has been annotated
-   correspondingly for the symbols needed.  */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
-void fnord () __attribute__((visibility("default")));
-#endif
-
-void fnord () { int i=42; }
+void fnord() { int i=42;}
 int main ()
 {
   void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
@@ -11703,11 +11598,7 @@ int main ()
   if (self)
     {
       if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else
-        {
-	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
-          else puts (dlerror ());
-	}
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
       /* dlclose (self); */
     }
   else
@@ -11753,7 +11644,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line $LINENO "configure"
+#line 11647 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11794,13 +11685,7 @@ else
 #  endif
 #endif
 
-/* When -fvisbility=hidden is used, assume the code has been annotated
-   correspondingly for the symbols needed.  */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
-void fnord () __attribute__((visibility("default")));
-#endif
-
-void fnord () { int i=42; }
+void fnord() { int i=42;}
 int main ()
 {
   void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
@@ -11809,11 +11694,7 @@ int main ()
   if (self)
     {
       if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else
-        {
-	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
-          else puts (dlerror ());
-	}
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
       /* dlclose (self); */
     }
   else
@@ -14103,7 +13984,7 @@ if test "${enable_regexp+set}" = set; then :
   enableval=$enable_regexp; case "${enableval}" in
          yes) enable_regexp="yes" ;;
           no) enable_regexp="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-regexp" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-regexp" "$LINENO" 5  ;;
          esac
 else
   enable_regexp=yes
@@ -14132,7 +14013,7 @@ if test "${enable_zlib+set}" = set; then :
   enableval=$enable_zlib; case "${enableval}" in
          yes) enable_zlib="yes" ;;
           no) enable_zlib="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-zlib" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-zlib" "$LINENO" 5  ;;
          esac
 else
   enable_zlib=yes
@@ -14213,7 +14094,7 @@ if test "${enable_gssapi_krb5+set}" = set; then :
   enableval=$enable_gssapi_krb5; case "${enableval}" in
          yes) enable_gssapi_krb5="yes" ;;
           no) enable_gssapi_krb5="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-gssapi-krb5" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-gssapi-krb5" "$LINENO" 5  ;;
          esac
 else
   enable_gssapi_krb5=no
@@ -14291,7 +14172,7 @@ if test "${enable_pthreads+set}" = set; then :
   enableval=$enable_pthreads; case "${enableval}" in
          yes) enable_pthreads="yes" ;;
           no) enable_pthreads="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-pthreads" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-pthreads" "$LINENO" 5  ;;
          esac
 else
   enable_pthreads=yes
@@ -14300,7 +14181,7 @@ fi
 
 
 if test "x$enable_pthreads" = "xno"; then
-	as_fn_error $? "rsyslog v3+ does no longer support single threading mode -- use a previous version for that" "$LINENO" 5;
+	as_fn_error $? "rsyslog v3+ does no longer support single threading mode -- use a previous version for that" "$LINENO" 5 ;
 fi
 
 if test "x$enable_pthreads" != "xno"; then
@@ -14366,7 +14247,7 @@ else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "pthread is missing
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 fi
 
 
@@ -14374,7 +14255,7 @@ else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "pthread is missing
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 
 fi
 
@@ -14503,7 +14384,7 @@ if test "${enable_klog+set}" = set; then :
   enableval=$enable_klog; case "${enableval}" in
          yes) enable_klog="yes" ;;
           no) enable_klog="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-klog" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-klog" "$LINENO" 5  ;;
          esac
 else
   enable_klog="yes"
@@ -14582,7 +14463,7 @@ if test "${enable_inet+set}" = set; then :
   enableval=$enable_inet; case "${enableval}" in
          yes) enable_inet="yes" ;;
           no) enable_inet="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-inet" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-inet" "$LINENO" 5  ;;
          esac
 else
   enable_inet="yes"
@@ -14643,7 +14524,7 @@ if test "${enable_unlimited_select+set}" = set; then :
   enableval=$enable_unlimited_select; case "${enableval}" in
          yes) enable_unlimited_select="yes" ;;
           no) enable_unlimited_select="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-unlimited-select" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-unlimited-select" "$LINENO" 5  ;;
          esac
 else
   enable_unlimited_select="no"
@@ -14686,7 +14567,7 @@ if test "${enable_debug+set}" = set; then :
   enableval=$enable_debug; case "${enableval}" in
          yes) enable_debug="yes" ;;
           no) enable_debug="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-debug" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-debug" "$LINENO" 5  ;;
          esac
 else
   enable_debug="no"
@@ -14711,7 +14592,7 @@ if test "${enable_rtinst+set}" = set; then :
   enableval=$enable_rtinst; case "${enableval}" in
          yes) enable_rtinst="yes" ;;
           no) enable_rtinst="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-rtinst" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-rtinst" "$LINENO" 5  ;;
          esac
 else
   enable_rtinst="no"
@@ -14731,7 +14612,7 @@ if test "${enable_valgrind+set}" = set; then :
   enableval=$enable_valgrind; case "${enableval}" in
          yes) enable_valgrind="yes" ;;
           no) enable_valgrind="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-valgrind" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-valgrind" "$LINENO" 5  ;;
          esac
 else
   enable_valgrind="no"
@@ -14751,7 +14632,7 @@ if test "${enable_memcheck+set}" = set; then :
   enableval=$enable_memcheck; case "${enableval}" in
          yes) enable_memcheck="yes" ;;
           no) enable_memcheck="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-memcheck" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-memcheck" "$LINENO" 5  ;;
          esac
 else
   enable_memcheck="no"
@@ -14771,7 +14652,7 @@ if test "${enable_diagtools+set}" = set; then :
   enableval=$enable_diagtools; case "${enableval}" in
          yes) enable_diagtools="yes" ;;
           no) enable_diagtools="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-diagtools" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-diagtools" "$LINENO" 5  ;;
          esac
 else
   enable_diagtools=no
@@ -14795,7 +14676,7 @@ if test "${enable_mysql+set}" = set; then :
   enableval=$enable_mysql; case "${enableval}" in
          yes) enable_mysql="yes" ;;
           no) enable_mysql="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-mysql" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-mysql" "$LINENO" 5  ;;
          esac
 else
   enable_mysql=no
@@ -14844,7 +14725,7 @@ fi
     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "mysql_config not found in PATH - usually a package named mysql-dev, libmysql-dev or similar, is missing - install it to fix this issue
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
   fi
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for mysql_init in -lmysqlclient" >&5
 $as_echo_n "checking for mysql_init in -lmysqlclient... " >&6; }
@@ -14891,7 +14772,7 @@ else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "MySQL library is missing
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 fi
 
 fi
@@ -14913,7 +14794,7 @@ if test "${enable_pgsql+set}" = set; then :
   enableval=$enable_pgsql; case "${enableval}" in
          yes) enable_pgsql="yes" ;;
           no) enable_pgsql="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-pgsql" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-pgsql" "$LINENO" 5  ;;
          esac
 else
   enable_pgsql=no
@@ -14962,7 +14843,7 @@ fi
     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "pg_config not found in PATH
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
   fi
   { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PQconnectdb in -lpq" >&5
 $as_echo_n "checking for PQconnectdb in -lpq... " >&6; }
@@ -15009,7 +14890,7 @@ else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "PgSQL library is missing
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 fi
 
 fi
@@ -15031,7 +14912,7 @@ if test "${enable_oracle+set}" = set; then :
   enableval=$enable_oracle; case "${enableval}" in
 	 yes) enable_oracle="yes" ;;
 	 no) enable_oracle="no" ;;
-	 *) as_fn_error $? "bad value ${enableval} for --enable-oracle" "$LINENO" 5 ;;
+	 *) as_fn_error $? "bad value ${enableval} for --enable-oracle" "$LINENO" 5  ;;
 	 esac
 else
   enable_oracle=no
@@ -15085,7 +14966,7 @@ else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "Oracle (OCI) library is missing: wrong oracle home
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 fi
 
     elif test -d "$ORACLE_LIB_PATH" -a -d "$ORACLE_INCLUDE_PATH"
@@ -15134,7 +15015,7 @@ else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "Oracle (OCI) library is missing: wrong oracle directories
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 fi
 
     else
@@ -15179,7 +15060,7 @@ fi
            { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "oracle-instantclient-config not found in PATH
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
         fi
         { $as_echo "$as_me:${as_lineno-$LINENO}: checking for OCIEnvCreate in -locci" >&5
 $as_echo_n "checking for OCIEnvCreate in -locci... " >&6; }
@@ -15226,7 +15107,7 @@ else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "Oracle (OCI) libraray is missing
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 fi
 
     fi
@@ -15249,7 +15130,7 @@ if test "${enable_libdbi+set}" = set; then :
   enableval=$enable_libdbi; case "${enableval}" in
          yes) enable_libdbi="yes" ;;
           no) enable_libdbi="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-libdbi" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-libdbi" "$LINENO" 5  ;;
          esac
 else
   enable_libdbi=no
@@ -15269,7 +15150,7 @@ else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "libdbi is missing
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 
 fi
 
@@ -15319,7 +15200,7 @@ else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "libdbi library is missing
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 
 fi
 
@@ -15385,7 +15266,7 @@ if test "${enable_snmp+set}" = set; then :
   enableval=$enable_snmp; case "${enableval}" in
          yes) enable_snmp="yes" ;;
           no) enable_snmp="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-snmp" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-snmp" "$LINENO" 5  ;;
          esac
 else
   enable_snmp=no
@@ -15405,7 +15286,7 @@ else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "Net-SNMP is missing
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 
 fi
 
@@ -15455,7 +15336,7 @@ else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "Net-SNMP library is missing
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 
 fi
 
@@ -15478,7 +15359,7 @@ if test "${enable_gnutls+set}" = set; then :
   enableval=$enable_gnutls; case "${enableval}" in
          yes) enable_gnutls="yes" ;;
           no) enable_gnutls="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-gnutls" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-gnutls" "$LINENO" 5  ;;
          esac
 else
   enable_gnutls=no
@@ -15553,7 +15434,6 @@ installed software in a non-standard prefix.
 Alternatively, you may set the environment variables GNUTLS_CFLAGS
 and GNUTLS_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details." "$LINENO" 5
-
 elif test $pkg_failed = untried; then
      	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
@@ -15568,8 +15448,7 @@ and GNUTLS_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details" "$LINENO" 5; }
-
+See \`config.log' for more details" "$LINENO" 5 ; }
 else
 	GNUTLS_CFLAGS=$pkg_cv_GNUTLS_CFLAGS
 	GNUTLS_LIBS=$pkg_cv_GNUTLS_LIBS
@@ -15596,7 +15475,7 @@ if test "${enable_rsyslogrt+set}" = set; then :
   enableval=$enable_rsyslogrt; case "${enableval}" in
          yes) enable_rsyslogrt="yes" ;;
           no) enable_rsyslogrt="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-rsyslogrt" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-rsyslogrt" "$LINENO" 5  ;;
          esac
 else
   enable_rsyslogrt=yes
@@ -15625,7 +15504,7 @@ if test "${enable_rsyslogd+set}" = set; then :
   enableval=$enable_rsyslogd; case "${enableval}" in
          yes) enable_rsyslogd="yes" ;;
           no) enable_rsyslogd="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-rsyslogd" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-rsyslogd" "$LINENO" 5  ;;
          esac
 else
   enable_rsyslogd=yes
@@ -15652,7 +15531,7 @@ if test "${enable_extended_tests+set}" = set; then :
   enableval=$enable_extended_tests; case "${enableval}" in
          yes) enable_rsyslogd="yes" ;;
           no) enable_rsyslogd="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-extended-tests" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-extended-tests" "$LINENO" 5  ;;
          esac
 else
   enable_extended_tests=no
@@ -15679,7 +15558,7 @@ if test "${enable_mysql_tests+set}" = set; then :
   enableval=$enable_mysql_tests; case "${enableval}" in
          yes) enable_mysql_tests="yes" ;;
           no) enable_mysql_tests="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-mysql-tests" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-mysql-tests" "$LINENO" 5  ;;
          esac
 else
   enable_mysql_tests=no
@@ -15702,7 +15581,7 @@ if test "${enable_mail+set}" = set; then :
   enableval=$enable_mail; case "${enableval}" in
          yes) enable_mail="yes" ;;
           no) enable_mail="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-mail" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-mail" "$LINENO" 5  ;;
          esac
 else
   enable_mail=no
@@ -15729,7 +15608,7 @@ if test "${enable_imdiag+set}" = set; then :
   enableval=$enable_imdiag; case "${enableval}" in
          yes) enable_imdiag="yes" ;;
           no) enable_imdiag="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-imdiag" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-imdiag" "$LINENO" 5  ;;
          esac
 else
   enable_imdiag=no
@@ -15752,7 +15631,7 @@ if test "${enable_relp+set}" = set; then :
   enableval=$enable_relp; case "${enableval}" in
          yes) enable_relp="yes" ;;
           no) enable_relp="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-relp" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-relp" "$LINENO" 5  ;;
          esac
 else
   enable_relp=no
@@ -15827,7 +15706,6 @@ installed software in a non-standard prefix.
 Alternatively, you may set the environment variables RELP_CFLAGS
 and RELP_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details." "$LINENO" 5
-
 elif test $pkg_failed = untried; then
      	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
@@ -15842,8 +15720,7 @@ and RELP_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details" "$LINENO" 5; }
-
+See \`config.log' for more details" "$LINENO" 5 ; }
 else
 	RELP_CFLAGS=$pkg_cv_RELP_CFLAGS
 	RELP_LIBS=$pkg_cv_RELP_LIBS
@@ -15870,7 +15747,7 @@ if test "${enable_rfc3195+set}" = set; then :
   enableval=$enable_rfc3195; case "${enableval}" in
          yes) enable_rfc3195="yes" ;;
           no) enable_rfc3195="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-rfc3195" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-rfc3195" "$LINENO" 5  ;;
          esac
 else
   enable_rfc3195=no
@@ -15945,7 +15822,6 @@ installed software in a non-standard prefix.
 Alternatively, you may set the environment variables LIBLOGGING_CFLAGS
 and LIBLOGGING_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details." "$LINENO" 5
-
 elif test $pkg_failed = untried; then
      	{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
@@ -15960,8 +15836,7 @@ and LIBLOGGING_LIBS to avoid the need to call pkg-config.
 See the pkg-config man page for more details.
 
 To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details" "$LINENO" 5; }
-
+See \`config.log' for more details" "$LINENO" 5 ; }
 else
 	LIBLOGGING_CFLAGS=$pkg_cv_LIBLOGGING_CFLAGS
 	LIBLOGGING_LIBS=$pkg_cv_LIBLOGGING_LIBS
@@ -15989,7 +15864,7 @@ if test "${enable_testbench+set}" = set; then :
   enableval=$enable_testbench; case "${enableval}" in
          yes) enable_testbench="yes" ;;
           no) enable_testbench="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-testbench" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-testbench" "$LINENO" 5  ;;
          esac
 else
   enable_testbench=yes
@@ -16012,7 +15887,7 @@ if test "${enable_imfile+set}" = set; then :
   enableval=$enable_imfile; case "${enableval}" in
          yes) enable_imfile="yes" ;;
           no) enable_imfile="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-imfile" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-imfile" "$LINENO" 5  ;;
          esac
 else
   enable_imfile=no
@@ -16035,7 +15910,7 @@ if test "${enable_imsolaris+set}" = set; then :
   enableval=$enable_imsolaris; case "${enableval}" in
          yes) enable_imsolaris="yes" ;;
           no) enable_imsolaris="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-imsolaris" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-imsolaris" "$LINENO" 5  ;;
          esac
 else
   enable_imsolaris=no
@@ -16057,7 +15932,7 @@ if test "${enable_imptcp+set}" = set; then :
   enableval=$enable_imptcp; case "${enableval}" in
          yes) enable_imptcp="yes" ;;
           no) enable_imptcp="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-imptcp" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-imptcp" "$LINENO" 5  ;;
          esac
 else
   enable_imptcp=no
@@ -16080,7 +15955,7 @@ if test "${enable_impstats+set}" = set; then :
   enableval=$enable_impstats; case "${enableval}" in
          yes) enable_impstats="yes" ;;
           no) enable_impstats="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-impstats" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-impstats" "$LINENO" 5  ;;
          esac
 else
   enable_impstats=no
@@ -16103,7 +15978,7 @@ if test "${enable_omprog+set}" = set; then :
   enableval=$enable_omprog; case "${enableval}" in
          yes) enable_omprog="yes" ;;
           no) enable_omprog="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-omprog" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-omprog" "$LINENO" 5  ;;
          esac
 else
   enable_omprog=no
@@ -16126,7 +16001,7 @@ if test "${enable_omudpspoof+set}" = set; then :
   enableval=$enable_omudpspoof; case "${enableval}" in
          yes) enable_omudpspoof="yes" ;;
           no) enable_omudpspoof="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-omudpspoof" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-omudpspoof" "$LINENO" 5  ;;
          esac
 else
   enable_omudpspoof=no
@@ -16147,7 +16022,7 @@ else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "libnet is missing
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 
 fi
 
@@ -16197,7 +16072,7 @@ else
   { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
 as_fn_error $? "libnet is missing
-See \`config.log' for more details" "$LINENO" 5; }
+See \`config.log' for more details" "$LINENO" 5 ; }
 
 fi
 
@@ -16220,7 +16095,7 @@ if test "${enable_omstdout+set}" = set; then :
   enableval=$enable_omstdout; case "${enableval}" in
          yes) enable_omstdout="yes" ;;
           no) enable_omstdout="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-omstdout" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-omstdout" "$LINENO" 5  ;;
          esac
 else
   enable_omstdout=no
@@ -16243,7 +16118,7 @@ if test "${enable_pmlastmsg+set}" = set; then :
   enableval=$enable_pmlastmsg; case "${enableval}" in
          yes) enable_pmlastmsg="yes" ;;
           no) enable_pmlastmsg="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-pmlastmsg" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-pmlastmsg" "$LINENO" 5  ;;
          esac
 else
   enable_pmlastmsg=no
@@ -16266,7 +16141,7 @@ if test "${enable_pmcisconames+set}" = set; then :
   enableval=$enable_pmcisconames; case "${enableval}" in
          yes) enable_pmcisconames="yes" ;;
           no) enable_pmcisconames="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-pmcisconames" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-pmcisconames" "$LINENO" 5  ;;
          esac
 else
   enable_pmcisconames=no
@@ -16289,7 +16164,7 @@ if test "${enable_pmaixforwardedfrom+set}" = set; then :
   enableval=$enable_pmaixforwardedfrom; case "${enableval}" in
          yes) enable_pmaixforwardedfrom="yes" ;;
           no) enable_pmaixforwardedfrom="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-pmaixforwardedfrom" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-pmaixforwardedfrom" "$LINENO" 5  ;;
          esac
 else
   enable_pmaixforwardedfrom=no
@@ -16312,7 +16187,7 @@ if test "${enable_pmsnare+set}" = set; then :
   enableval=$enable_pmsnare; case "${enableval}" in
          yes) enable_pmsnare="yes" ;;
           no) enable_pmsnare="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-pmsnare" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-pmsnare" "$LINENO" 5  ;;
          esac
 else
   enable_pmsnare=no
@@ -16335,7 +16210,7 @@ if test "${enable_pmrfc3164sd+set}" = set; then :
   enableval=$enable_pmrfc3164sd; case "${enableval}" in
          yes) enable_pmrfc3164sd="yes" ;;
           no) enable_pmrfc3164sd="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-pmrfc3164sd" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-pmrfc3164sd" "$LINENO" 5  ;;
          esac
 else
   enable_pmrfc3164sd=no
@@ -16358,7 +16233,7 @@ if test "${enable_omruleset+set}" = set; then :
   enableval=$enable_omruleset; case "${enableval}" in
          yes) enable_omruleset="yes" ;;
           no) enable_omruleset="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-omruleset" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-omruleset" "$LINENO" 5  ;;
          esac
 else
   enable_omruleset=yes
@@ -16381,7 +16256,7 @@ if test "${enable_omdbalerting+set}" = set; then :
   enableval=$enable_omdbalerting; case "${enableval}" in
          yes) enable_omdbalerting="yes" ;;
           no) enable_omdbalerting="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-omdbalerting" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-omdbalerting" "$LINENO" 5  ;;
          esac
 else
   enable_omdbalerting=no
@@ -16405,7 +16280,7 @@ if test "${enable_gui+set}" = set; then :
   enableval=$enable_gui; case "${enableval}" in
          yes) enable_gui="yes" ;;
           no) enable_gui="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-gui" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-gui" "$LINENO" 5  ;;
          esac
 else
   enable_gui=no
@@ -16436,7 +16311,7 @@ if test "${enable_omuxsock+set}" = set; then :
   enableval=$enable_omuxsock; case "${enableval}" in
          yes) enable_omuxsock="yes" ;;
           no) enable_omuxsock="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-omuxsock" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-omuxsock" "$LINENO" 5  ;;
          esac
 else
   enable_omuxsock=no
@@ -16461,7 +16336,7 @@ if test "${enable_cust1+set}" = set; then :
   enableval=$enable_cust1; case "${enableval}" in
          yes) enable_cust1="yes" ;;
           no) enable_cust1="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-cust1" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-cust1" "$LINENO" 5  ;;
          esac
 else
   enable_cust1=no
@@ -16485,7 +16360,7 @@ if test "${enable_smcustbindcdr+set}" = set; then :
   enableval=$enable_smcustbindcdr; case "${enableval}" in
          yes) enable_smcustbindcdr="yes" ;;
           no) enable_smcustbindcdr="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-smcustbindcdr" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-smcustbindcdr" "$LINENO" 5  ;;
          esac
 else
   enable_smcustbindcdr=no
@@ -16510,7 +16385,7 @@ if test "${enable_imtemplate+set}" = set; then :
   enableval=$enable_imtemplate; case "${enableval}" in
          yes) enable_imtemplate="yes" ;;
           no) enable_imtemplate="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-imtemplate" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-imtemplate" "$LINENO" 5  ;;
          esac
 else
   enable_imtemplate=no
@@ -16540,7 +16415,7 @@ if test "${enable_omtemplate+set}" = set; then :
   enableval=$enable_omtemplate; case "${enableval}" in
          yes) enable_omtemplate="yes" ;;
           no) enable_omtemplate="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-omtemplate" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-omtemplate" "$LINENO" 5  ;;
          esac
 else
   enable_omtemplate=no
@@ -16568,7 +16443,7 @@ if test "${enable_mmsnmptrapd+set}" = set; then :
   enableval=$enable_mmsnmptrapd; case "${enableval}" in
          yes) enable_mmsnmptrapd="yes" ;;
           no) enable_mmsnmptrapd="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-mmsnmptrapd" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-mmsnmptrapd" "$LINENO" 5  ;;
          esac
 else
   enable_mmsnmptrapd=no
@@ -16591,7 +16466,7 @@ if test "${enable_omhdfs+set}" = set; then :
   enableval=$enable_omhdfs; case "${enableval}" in
          yes) enable_omhdfs="yes" ;;
           no) enable_omhdfs="no" ;;
-           *) as_fn_error $? "bad value ${enableval} for --enable-omhdfs" "$LINENO" 5 ;;
+           *) as_fn_error $? "bad value ${enableval} for --enable-omhdfs" "$LINENO" 5  ;;
          esac
 else
   enable_omhdfs=no
@@ -17336,8 +17211,8 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by rsyslog $as_me 5.8.3, which was
-generated by GNU Autoconf 2.66.  Invocation command line was
+This file was extended by rsyslog $as_me 5.8.4, which was
+generated by GNU Autoconf 2.67.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -17402,8 +17277,8 @@ _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
-rsyslog config.status 5.8.3
-configured by $0, generated by GNU Autoconf 2.66,
+rsyslog config.status 5.8.4
+configured by $0, generated by GNU Autoconf 2.67,
   with options \\"\$ac_cs_config\\"
 
 Copyright (C) 2010 Free Software Foundation, Inc.
@@ -17424,11 +17299,16 @@ ac_need_defaults=:
 while test $# != 0
 do
   case $1 in
-  --*=*)
+  --*=?*)
     ac_option=`expr "X$1" : 'X\([^=]*\)='`
     ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
     ac_shift=:
     ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
   *)
     ac_option=$1
     ac_optarg=$2
@@ -17450,6 +17330,7 @@ do
     $ac_shift
     case $ac_optarg in
     *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
     esac
     as_fn_append CONFIG_FILES " '$ac_optarg'"
     ac_need_defaults=false;;
@@ -17525,143 +17406,131 @@ AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
 sed_quote_subst='$sed_quote_subst'
 double_quote_subst='$double_quote_subst'
 delay_variable_subst='$delay_variable_subst'
-enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
-macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
-macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
-enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
-pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
-enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
-SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
-ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
-host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
-host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
-host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
-build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
-build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
-build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
-SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
-Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
-GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
-EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
-FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
-LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
-NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
-LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
-max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
-ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
-exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
-lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
-lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
-lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
-reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
-reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
-OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
-deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
-file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
-AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
-AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
-STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
-RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
-old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
-old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
-old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
-lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
-CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
-CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
-compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
-GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
-objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
-MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
-lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
-lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
-lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
-lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
-lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
-need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
-DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
-NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
-LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
-OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
-OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
-libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
-shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
-extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
-archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
-enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
-export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
-whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
-compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
-old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
-old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
-archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
-archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
-module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
-module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
-with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
-allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
-no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec_ld='`$ECHO "$hardcode_libdir_flag_spec_ld" | $SED "$delay_single_quote_subst"`'
-hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
-hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
-hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
-hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
-hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
-hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
-inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
-link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
-fix_srcfile_path='`$ECHO "$fix_srcfile_path" | $SED "$delay_single_quote_subst"`'
-always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
-export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
-exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
-include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
-prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
-file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
-variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
-need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
-need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
-version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
-runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
-shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
-shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
-libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
-library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
-soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
-install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
-postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
-postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
-finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
-finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
-hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
-sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
-sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
-hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
-enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
-enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
-enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
-old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
-striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`'
+macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`'
+host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`'
+host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`'
+host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`'
+build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`'
+build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`'
+build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`'
+SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`'
+Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`'
+GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`'
+EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`'
+FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`'
+LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`'
+NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`'
+LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`'
+exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`'
+AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`'
+STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`'
+compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`'
+GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
+objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`'
+SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`'
+ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`'
+need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`'
+LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`'
+libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`'
+fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
+need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`'
+version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`'
+striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`'
 
 LTCC='$LTCC'
 LTCFLAGS='$LTCFLAGS'
 compiler='$compiler_DEFAULT'
 
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-\$1
-_LTECHO_EOF'
-}
-
 # Quote evaled strings.
-for var in SHELL \
-ECHO \
-SED \
+for var in SED \
 GREP \
 EGREP \
 FGREP \
@@ -17685,6 +17554,8 @@ lt_cv_sys_global_symbol_pipe \
 lt_cv_sys_global_symbol_to_cdecl \
 lt_cv_sys_global_symbol_to_c_name_address \
 lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+SHELL \
+ECHO \
 lt_prog_compiler_no_builtin_flag \
 lt_prog_compiler_wl \
 lt_prog_compiler_pic \
@@ -17714,13 +17585,12 @@ variables_saved_for_relink \
 libname_spec \
 library_names_spec \
 soname_spec \
-install_override_mode \
 finish_eval \
 old_striplib \
 striplib; do
-    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
     *[\\\\\\\`\\"\\\$]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -17747,9 +17617,9 @@ postuninstall_cmds \
 finish_cmds \
 sys_lib_search_path_spec \
 sys_lib_dlsearch_path_spec; do
-    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
     *[\\\\\\\`\\"\\\$]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -17757,6 +17627,12 @@ sys_lib_dlsearch_path_spec; do
     esac
 done
 
+# Fix-up fallback echo if it was mangled by the above quoting rules.
+case \$lt_ECHO in
+*'\\\$0 --fallback-echo"')  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\`
+  ;;
+esac
+
 ac_aux_dir='$ac_aux_dir'
 xsi_shell='$xsi_shell'
 lt_shell_append='$lt_shell_append'
@@ -17834,7 +17710,7 @@ do
     "java/Makefile") CONFIG_FILES="$CONFIG_FILES java/Makefile" ;;
     "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;;
 
-  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5 ;;
   esac
 done
 
@@ -18150,7 +18026,7 @@ do
   esac
   case $ac_mode$ac_tag in
   :[FHL]*:*);;
-  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5 ;;
   :[FH]-) ac_tag=-:-;;
   :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
   esac
@@ -18178,7 +18054,7 @@ do
 	   [\\/$]*) false;;
 	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
 	   esac ||
-	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5 ;;
       esac
       case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
       as_fn_append ac_file_inputs " '$ac_f'"
@@ -18205,7 +18081,7 @@ $as_echo "$as_me: creating $ac_file" >&6;}
 
     case $ac_tag in
     *:-:* | *:-) cat >"$tmp/stdin" \
-      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5  ;;
     esac
     ;;
   esac
@@ -18541,8 +18417,7 @@ $as_echo X"$file" |
 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
 #
 #   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
-#                 Inc.
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
 #   Written by Gordon Matzigkeit, 1996
 #
 #   This file is part of GNU Libtool.
@@ -18590,12 +18465,6 @@ pic_mode=$pic_mode
 # Whether or not to optimize for fast installation.
 fast_install=$enable_fast_install
 
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# An echo program that protects backslashes.
-ECHO=$lt_ECHO
-
 # The host system.
 host_alias=$host_alias
 host=$host
@@ -18645,6 +18514,10 @@ SP2NL=$lt_lt_SP2NL
 # turn newlines into spaces.
 NL2SP=$lt_lt_NL2SP
 
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
 # An object symbol dumper.
 OBJDUMP=$lt_OBJDUMP
 
@@ -18666,9 +18539,6 @@ RANLIB=$lt_RANLIB
 old_postinstall_cmds=$lt_old_postinstall_cmds
 old_postuninstall_cmds=$lt_old_postuninstall_cmds
 
-# Whether to use a lock for old archive extraction.
-lock_old_archive_extraction=$lock_old_archive_extraction
-
 # A C compiler.
 LTCC=$lt_CC
 
@@ -18690,6 +18560,12 @@ global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name
 # The name of the directory that contains temporary libtool files.
 objdir=$objdir
 
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that does not interpret backslashes.
+ECHO=$lt_ECHO
+
 # Used to examine libraries when file_magic_cmd begins with "file".
 MAGIC_CMD=$MAGIC_CMD
 
@@ -18752,9 +18628,6 @@ library_names_spec=$lt_library_names_spec
 # The coded name of the library, if different from the real name.
 soname_spec=$lt_soname_spec
 
-# Permission mode override for installation of shared libraries.
-install_override_mode=$lt_install_override_mode
-
 # Command to use after installation of a shared archive.
 postinstall_cmds=$lt_postinstall_cmds
 
@@ -18794,10 +18667,6 @@ striplib=$lt_striplib
 # The linker used to build libraries.
 LD=$lt_LD
 
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
 # Commands used to build an old-style archive.
 old_archive_cmds=$lt_old_archive_cmds
 
@@ -19057,7 +18926,7 @@ _LT_EOF
 func_dirname ()
 {
   # Extract subdirectory from the argument.
-  func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
   if test "X$func_dirname_result" = "X${1}"; then
     func_dirname_result="${3}"
   else
@@ -19068,7 +18937,7 @@ func_dirname ()
 # func_basename file
 func_basename ()
 {
-  func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
 }
 
 
@@ -19081,8 +18950,10 @@ func_basename ()
 func_stripname ()
 {
   case ${2} in
-    .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-    *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+    .*) func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+    *)  func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
   esac
 }
 
@@ -19093,20 +18964,20 @@ my_sed_long_arg='1s/^-[^=]*=//'
 # func_opt_split
 func_opt_split ()
 {
-  func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"`
-  func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"`
+  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
 }
 
 # func_lo2o object
 func_lo2o ()
 {
-  func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
 }
 
 # func_xform libobj-or-source
 func_xform ()
 {
-  func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
+  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'`
 }
 
 # func_arith arithmetic-term...
diff --git a/configure.ac b/configure.ac
index 427c0b0..2706ec0 100644
--- a/configure.ac
+++ b/configure.ac
@@ -2,7 +2,7 @@
 # Process this file with autoconf to produce a configure script.
 
 AC_PREREQ(2.61)
-AC_INIT([rsyslog],[5.8.3],[rsyslog@lists.adiscon.com])
+AC_INIT([rsyslog],[5.8.4],[rsyslog@lists.adiscon.com])
 AM_INIT_AUTOMAKE
 
 m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
diff --git a/doc/Makefile.in b/doc/Makefile.in
index a25a324..a0952d0 100644
--- a/doc/Makefile.in
+++ b/doc/Makefile.in
@@ -188,6 +188,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/doc/manual.html b/doc/manual.html
index 2c13e27..a2c4122 100644
--- a/doc/manual.html
+++ b/doc/manual.html
@@ -19,7 +19,7 @@ rsyslog support</a> available directly from the source!</p>
 <p><b>Please visit the <a href="http://www.rsyslog.com/sponsors">rsyslog sponsor's page</a>
 to honor the project sponsors or become one yourself!</b> We are very grateful for any help towards the
 project goals.</p>
-<p><b>This documentation is for version 5.8.3 (v5-stable branch) of rsyslog.</b>
+<p><b>This documentation is for version 5.8.4 (v5-stable branch) of rsyslog.</b>
 Visit the <i><a href="http://www.rsyslog.com/status">rsyslog status page</a></i></b>
 to obtain current version information and project status.
 </p><p><b>If you like rsyslog, you might
diff --git a/java/Makefile.in b/java/Makefile.in
index 5a06ecf..5aaeee2 100644
--- a/java/Makefile.in
+++ b/java/Makefile.in
@@ -202,6 +202,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/ltmain.sh b/ltmain.sh
index d8efb57..d88da2c 100755
--- a/ltmain.sh
+++ b/ltmain.sh
@@ -1,10 +1,9 @@
 # Generated from ltmain.m4sh.
 
-# libtool (GNU libtool) 2.2.10
+# ltmain.sh (GNU libtool) 2.2.6b
 # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
 # This is free software; see the source for copying conditions.  There is NO
 # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 
@@ -33,54 +32,50 @@
 #
 # Provide generalized library-building support services.
 #
-#       --config             show all configuration variables
-#       --debug              enable verbose shell tracing
-#   -n, --dry-run            display commands without modifying any files
-#       --features           display basic configuration information and exit
-#       --mode=MODE          use operation mode MODE
-#       --preserve-dup-deps  don't remove duplicate dependency libraries
-#       --quiet, --silent    don't print informational messages
-#       --no-quiet, --no-silent
-#                            print informational messages (default)
-#       --tag=TAG            use configuration variables from tag TAG
-#   -v, --verbose            print more informational messages than default
-#       --no-verbose         don't print the extra informational messages
-#       --version            print version information
-#   -h, --help, --help-all   print short, long, or detailed help message
+#     --config             show all configuration variables
+#     --debug              enable verbose shell tracing
+# -n, --dry-run            display commands without modifying any files
+#     --features           display basic configuration information and exit
+#     --mode=MODE          use operation mode MODE
+#     --preserve-dup-deps  don't remove duplicate dependency libraries
+#     --quiet, --silent    don't print informational messages
+#     --tag=TAG            use configuration variables from tag TAG
+# -v, --verbose            print informational messages (default)
+#     --version            print version information
+# -h, --help               print short or long help message
 #
 # MODE must be one of the following:
 #
-#         clean              remove files from the build directory
-#         compile            compile a source file into a libtool object
-#         execute            automatically set library path, then run a program
-#         finish             complete the installation of libtool libraries
-#         install            install libraries or executables
-#         link               create a library or an executable
-#         uninstall          remove libraries from an installed directory
+#       clean              remove files from the build directory
+#       compile            compile a source file into a libtool object
+#       execute            automatically set library path, then run a program
+#       finish             complete the installation of libtool libraries
+#       install            install libraries or executables
+#       link               create a library or an executable
+#       uninstall          remove libraries from an installed directory
 #
-# MODE-ARGS vary depending on the MODE.  When passed as first option,
-# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
+# MODE-ARGS vary depending on the MODE.
 # Try `$progname --help --mode=MODE' for a more detailed description of MODE.
 #
 # When reporting a bug, please describe a test case to reproduce it and
 # include the following information:
 #
-#         host-triplet:	$host
-#         shell:		$SHELL
-#         compiler:		$LTCC
-#         compiler flags:		$LTCFLAGS
-#         linker:		$LD (gnu? $with_gnu_ld)
-#         $progname:	(GNU libtool) 2.2.10
-#         automake:	$automake_version
-#         autoconf:	$autoconf_version
+#       host-triplet:	$host
+#       shell:		$SHELL
+#       compiler:		$LTCC
+#       compiler flags:		$LTCFLAGS
+#       linker:		$LD (gnu? $with_gnu_ld)
+#       $progname:		(GNU libtool) 2.2.6b Debian-2.2.6b-2
+#       automake:		$automake_version
+#       autoconf:		$autoconf_version
 #
 # Report bugs to <bug-libtool@gnu.org>.
 
-PROGRAM=libtool
+PROGRAM=ltmain.sh
 PACKAGE=libtool
-VERSION=2.2.10
+VERSION="2.2.6b Debian-2.2.6b-2"
 TIMESTAMP=""
-package_revision=1.3175
+package_revision=1.3017
 
 # Be Bourne compatible
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
@@ -96,15 +91,10 @@ fi
 BIN_SH=xpg4; export BIN_SH # for Tru64
 DUALCASE=1; export DUALCASE # for MKS sh
 
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
-}
-
 # NLS nuisances: We save the old values to restore during execute mode.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
 lt_user_locale=
 lt_safe_locale=
 for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
@@ -117,24 +107,15 @@ do
 	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
 	fi"
 done
-LC_ALL=C
-LANGUAGE=C
-export LANGUAGE LC_ALL
 
 $lt_unset CDPATH
 
 
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
 
 
 
 : ${CP="cp -f"}
-test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${ECHO="echo"}
 : ${EGREP="/bin/grep -E"}
 : ${FGREP="/bin/grep -F"}
 : ${GREP="/bin/grep"}
@@ -178,168 +159,32 @@ basename="s,^.*/,,"
 func_dirname_and_basename ()
 {
   # Extract subdirectory from the argument.
-  func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
   if test "X$func_dirname_result" = "X${1}"; then
     func_dirname_result="${3}"
   else
     func_dirname_result="$func_dirname_result${2}"
   fi
-  func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
 }
 
 # Generated shell functions inserted here.
 
-# These SED scripts presuppose an absolute path with a trailing slash.
-pathcar='s,^/\([^/]*\).*$,\1,'
-pathcdr='s,^/[^/]*,,'
-removedotparts=':dotsl
-		s@/\./@/@g
-		t dotsl
-		s,/\.$,/,'
-collapseslashes='s@/\{1,\}@/@g'
-finalslash='s,/*$,/,'
-
-# func_normal_abspath PATH
-# Remove doubled-up and trailing slashes, "." path components,
-# and cancel out any ".." path components in PATH after making
-# it an absolute path.
-#             value returned in "$func_normal_abspath_result"
-func_normal_abspath ()
-{
-  # Start from root dir and reassemble the path.
-  func_normal_abspath_result=
-  func_normal_abspath_tpath=$1
-  func_normal_abspath_altnamespace=
-  case $func_normal_abspath_tpath in
-    "")
-      # Empty path, that just means $cwd.
-      func_stripname '' '/' "`pwd`"
-      func_normal_abspath_result=$func_stripname_result
-      return
-    ;;
-    # The next three entries are used to spot a run of precisely
-    # two leading slashes without using negated character classes;
-    # we take advantage of case's first-match behaviour.
-    ///*)
-      # Unusual form of absolute path, do nothing.
-    ;;
-    //*)
-      # Not necessarily an ordinary path; POSIX reserves leading '//'
-      # and for example Cygwin uses it to access remote file shares
-      # over CIFS/SMB, so we conserve a leading double slash if found.
-      func_normal_abspath_altnamespace=/
-    ;;
-    /*)
-      # Absolute path, do nothing.
-    ;;
-    *)
-      # Relative path, prepend $cwd.
-      func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
-    ;;
-  esac
-  # Cancel out all the simple stuff to save iterations.  We also want
-  # the path to end with a slash for ease of parsing, so make sure
-  # there is one (and only one) here.
-  func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
-  while :; do
-    # Processed it all yet?
-    if test "$func_normal_abspath_tpath" = / ; then
-      # If we ascended to the root using ".." the result may be empty now.
-      if test -z "$func_normal_abspath_result" ; then
-        func_normal_abspath_result=/
-      fi
-      break
-    fi
-    func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$pathcar"`
-    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
-        -e "$pathcdr"`
-    # Figure out what to do with it
-    case $func_normal_abspath_tcomponent in
-      "")
-        # Trailing empty path component, ignore it.
-      ;;
-      ..)
-        # Parent dir; strip last assembled component from result.
-        func_dirname "$func_normal_abspath_result"
-        func_normal_abspath_result=$func_dirname_result
-      ;;
-      *)
-        # Actual path component, append it.
-        func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
-      ;;
-    esac
-  done
-  # Restore leading double-slash if one was found on entry.
-  func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
-}
-
-# func_relative_path SRCDIR DSTDIR
-# generates a relative path from SRCDIR to DSTDIR, with a trailing
-# slash if non-empty, suitable for immediately appending a filename
-# without needing to append a separator.
-#             value returned in "$func_relative_path_result"
-func_relative_path ()
-{
-  func_relative_path_result=
-  func_normal_abspath "$1"
-  func_relative_path_tlibdir=$func_normal_abspath_result
-  func_normal_abspath "$2"
-  func_relative_path_tbindir=$func_normal_abspath_result
-
-  # Ascend the tree starting from libdir
-  while :; do
-    # check if we have found a prefix of bindir
-    case $func_relative_path_tbindir in
-      $func_relative_path_tlibdir)
-        # found an exact match
-        func_relative_path_tcancelled=
-        break
-        ;;
-      $func_relative_path_tlibdir*)
-        # found a matching prefix
-        func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
-        func_relative_path_tcancelled=$func_stripname_result
-        if test -z "$func_relative_path_result"; then
-          func_relative_path_result=.
-        fi
-        break
-        ;;
-      *)
-        func_dirname $func_relative_path_tlibdir
-        func_relative_path_tlibdir=${func_dirname_result}
-        if test "x$func_relative_path_tlibdir" = x ; then
-          # Have to descend all the way to the root!
-          func_relative_path_result=../$func_relative_path_result
-          func_relative_path_tcancelled=$func_relative_path_tbindir
-          break
-        fi
-        func_relative_path_result=../$func_relative_path_result
-        ;;
-    esac
-  done
-
-  # Now calculate path; take care to avoid doubling-up slashes.
-  func_stripname '' '/' "$func_relative_path_result"
-  func_relative_path_result=$func_stripname_result
-  func_stripname '/' '/' "$func_relative_path_tcancelled"
-  if test "x$func_stripname_result" != x ; then
-    func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
-  fi
-
-  # Normalisation. If bindir is libdir, return empty string,
-  # else relative path ending with a slash; either way, target
-  # file name can be directly appended.
-  if test ! -z "$func_relative_path_result"; then
-    func_stripname './' '' "$func_relative_path_result/"
-    func_relative_path_result=$func_stripname_result
-  fi
-}
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
 
 # The name of this program:
+# In the unlikely event $progname began with a '-', it would play havoc with
+# func_echo (imagine progname=-n), so we prepend ./ in that case:
 func_dirname_and_basename "$progpath"
 progname=$func_basename_result
+case $progname in
+  -*) progname=./$progname ;;
+esac
 
 # Make sure we have an absolute path for reexecution:
 case $progpath in
@@ -413,13 +258,6 @@ func_verbose ()
     :
 }
 
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
-    $ECHO "$*"
-}
-
 # func_error arg...
 # Echo program name prefixed message to standard error.
 func_error ()
@@ -488,9 +326,9 @@ func_mkdir_p ()
         case $my_directory_path in */*) ;; *) break ;; esac
 
         # ...otherwise throw away the child directory and loop
-        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+        my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
       done
-      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+      my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
 
       save_mkdir_p_IFS="$IFS"; IFS=':'
       for my_dir in $my_dir_list; do
@@ -540,7 +378,7 @@ func_mktempdir ()
         func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
     fi
 
-    $ECHO "$my_tmpdir"
+    $ECHO "X$my_tmpdir" | $Xsed
 }
 
 
@@ -554,7 +392,7 @@ func_quote_for_eval ()
 {
     case $1 in
       *[\\\`\"\$]*)
-	func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
+	func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
       *)
         func_quote_for_eval_unquoted_result="$1" ;;
     esac
@@ -581,7 +419,7 @@ func_quote_for_expand ()
 {
     case $1 in
       *[\\\`\"]*)
-	my_arg=`$ECHO "$1" | $SED \
+	my_arg=`$ECHO "X$1" | $Xsed \
 	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
       *)
         my_arg="$1" ;;
@@ -651,19 +489,14 @@ func_show_eval_locale ()
 }
 
 
+
+
+
 # func_version
 # Echo version message to standard output and exit.
 func_version ()
 {
-    $SED -n '/(C)/!b go
-	:more
-	/\./!{
-	  N
-	  s/\n# / /
-	  b more
-	}
-	:go
-	/^# '$PROGRAM' (GNU /,/# warranty; / {
+    $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
         s/^# //
 	s/^# *$//
         s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
@@ -676,20 +509,19 @@ func_version ()
 # Echo short help message to standard output and exit.
 func_usage ()
 {
-    $SED -n '/^# Usage:/,/^#  *.*--help/ {
+    $SED -n '/^# Usage:/,/# -h/ {
         s/^# //
 	s/^# *$//
 	s/\$progname/'$progname'/
 	p
     }' < "$progpath"
-    echo
+    $ECHO
     $ECHO "run \`$progname --help | more' for full usage"
     exit $?
 }
 
-# func_help [NOEXIT]
-# Echo long help message to standard output and exit,
-# unless 'noexit' is passed as argument.
+# func_help
+# Echo long help message to standard output and exit.
 func_help ()
 {
     $SED -n '/^# Usage:/,/# Report bugs to/ {
@@ -706,10 +538,7 @@ func_help ()
 	s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
 	p
      }' < "$progpath"
-    ret=$?
-    if test -z "$1"; then
-      exit $ret
-    fi
+    exit $?
 }
 
 # func_missing_arg argname
@@ -717,7 +546,7 @@ func_help ()
 # exit_cmd.
 func_missing_arg ()
 {
-    func_error "missing argument for $1."
+    func_error "missing argument for $1"
     exit_cmd=exit
 }
 
@@ -727,6 +556,29 @@ exit_cmd=:
 
 
 
+# Check that we have a working $ECHO.
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
+  # Yippee, $ECHO works!
+  :
+else
+  # Restart under the correct shell, and then maybe $ECHO will work.
+  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit $EXIT_SUCCESS
+fi
 
 magic="%%%MAGIC variable%%%"
 magic_exe="%%%MAGIC EXE variable%%%"
@@ -784,16 +636,16 @@ func_config ()
 # Display the features supported by this script.
 func_features ()
 {
-    echo "host: $host"
+    $ECHO "host: $host"
     if test "$build_libtool_libs" = yes; then
-      echo "enable shared libraries"
+      $ECHO "enable shared libraries"
     else
-      echo "disable shared libraries"
+      $ECHO "disable shared libraries"
     fi
     if test "$build_old_libs" = yes; then
-      echo "enable static libraries"
+      $ECHO "enable static libraries"
     else
-      echo "disable static libraries"
+      $ECHO "disable static libraries"
     fi
 
     exit $?
@@ -920,21 +772,10 @@ func_enable_tag ()
 
       --quiet|--silent)	preserve_args="$preserve_args $opt"
 			opt_silent=:
-			opt_verbose=false
-			;;
-
-      --no-quiet|--no-silent)
-			preserve_args="$preserve_args $opt"
-			opt_silent=false
 			;;
 
       --verbose| -v)	preserve_args="$preserve_args $opt"
 			opt_silent=false
-			opt_verbose=:
-			;;
-
-      --no-verbose)	preserve_args="$preserve_args $opt"
-			opt_verbose=false
 			;;
 
       --tag)		test "$#" -eq 0 && func_missing_arg "$opt" && break
@@ -952,7 +793,6 @@ func_enable_tag ()
 
       -\?|-h)		func_usage					;;
       --help)		opt_help=:					;;
-      --help-all)	opt_help=': help-all'				;;
       --version)	func_version					;;
 
       -*)		func_fatal_help "unrecognized option \`$opt'"	;;
@@ -1176,13 +1016,10 @@ func_infer_tag ()
         func_quote_for_eval "$arg"
 	CC_quoted="$CC_quoted $func_quote_for_eval_result"
       done
-      CC_expanded=`func_echo_all $CC`
-      CC_quoted_expanded=`func_echo_all $CC_quoted`
       case $@ in
       # Blanks in the command may have been stripped by the calling shell,
       # but not from the CC environment variable when configure was run.
-      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
-      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
       # Blanks at the start of $base_compile will cause this to fail
       # if we don't check for them as well.
       *)
@@ -1196,11 +1033,8 @@ func_infer_tag ()
 	      func_quote_for_eval "$arg"
 	      CC_quoted="$CC_quoted $func_quote_for_eval_result"
 	    done
-	    CC_expanded=`func_echo_all $CC`
-	    CC_quoted_expanded=`func_echo_all $CC_quoted`
 	    case "$@ " in
-	    " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
-	    " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+	      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
 	      # The compiler in the base compile command matches
 	      # the one in the tagged configuration.
 	      # Assume this is the tagged configuration we want.
@@ -1379,7 +1213,7 @@ func_mode_compile ()
     *.[cCFSifmso] | \
     *.ada | *.adb | *.ads | *.asm | \
     *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
-    *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup)
+    *.[fF][09]? | *.for | *.java | *.obj | *.sx)
       func_xform "$libobj"
       libobj=$func_xform_result
       ;;
@@ -1454,7 +1288,7 @@ func_mode_compile ()
     # Calculate the filename of the output object if compiler does
     # not support -o with -c
     if test "$compiler_c_o" = no; then
-      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
+      output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
       lockfile="$output_obj.lock"
     else
       output_obj=
@@ -1611,7 +1445,7 @@ compiler."
 }
 
 $opt_help || {
-  test "$mode" = compile && func_mode_compile ${1+"$@"}
+test "$mode" = compile && func_mode_compile ${1+"$@"}
 }
 
 func_mode_help ()
@@ -1648,11 +1482,10 @@ This mode accepts the following additional options:
 
   -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
   -no-suppress      do not suppress compiler output for multiple passes
-  -prefer-pic       try to build PIC objects only
-  -prefer-non-pic   try to build non-PIC objects only
+  -prefer-pic       try to building PIC objects only
+  -prefer-non-pic   try to building non-PIC objects only
   -shared           do not build a \`.o' file suitable for static linking
   -static           only build a \`.o' file suitable for static linking
-  -Wc,FLAG          pass FLAG directly to the compiler
 
 COMPILE-COMMAND is a command to be used in creating a \`standard' object file
 from the given SOURCEFILE.
@@ -1705,7 +1538,7 @@ either the \`install' or \`cp' program.
 
 The following components of INSTALL-COMMAND are treated specially:
 
-  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+  -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
 
 The rest of the components are interpreted as arguments to that command (only
 BSD-compatible install options are recognized)."
@@ -1725,8 +1558,6 @@ The following components of LINK-COMMAND are treated specially:
 
   -all-static       do not do any dynamic linking at all
   -avoid-version    do not add a version suffix if possible
-  -bindir BINDIR    specify path to binaries directory (for systems where
-                    libraries must be found in the PATH setting at runtime)
   -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
@@ -1755,11 +1586,6 @@ The following components of LINK-COMMAND are treated specially:
   -version-info CURRENT[:REVISION[:AGE]]
                     specify library version info [each variable defaults to 0]
   -weak LIBNAME     declare that the target provides the LIBNAME interface
-  -Wc,FLAG
-  -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
-  -Wl,FLAG
-  -Xlinker FLAG     pass linker-specific FLAG directly to the linker
-  -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
 
 All other options (arguments beginning with \`-') are ignored.
 
@@ -1797,40 +1623,14 @@ Otherwise, only FILE itself is deleted using RM."
         ;;
     esac
 
-    echo
+    $ECHO
     $ECHO "Try \`$progname --help' for more information about other modes."
+
+    exit $?
 }
 
-# Now that we've collected a possible --mode arg, show help if necessary
-if $opt_help; then
-  if test "$opt_help" = :; then
-    func_mode_help
-  else
-    {
-      func_help noexit
-      for mode in compile link execute install finish uninstall clean; do
-	func_mode_help
-      done
-    } | sed -n '1p; 2,$s/^Usage:/  or: /p'
-    {
-      func_help noexit
-      for mode in compile link execute install finish uninstall clean; do
-	echo
-	func_mode_help
-      done
-    } |
-    sed '1d
-      /^When reporting/,/^Report/{
-	H
-	d
-      }
-      $x
-      /information about other modes/d
-      /more detailed .*MODE/d
-      s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
-  fi
-  exit $?
-fi
+  # Now that we've collected a possible --mode arg, show help if necessary
+  $opt_help && func_mode_help
 
 
 # func_mode_execute arg...
@@ -1912,7 +1712,7 @@ func_mode_execute ()
     for file
     do
       case $file in
-      -* | *.la | *.lo ) ;;
+      -*) ;;
       *)
 	# Do a test to see if this is really a libtool program.
 	if func_ltwrapper_script_p "$file"; then
@@ -1954,7 +1754,7 @@ func_mode_execute ()
       # Display what would be done.
       if test -n "$shlibpath_var"; then
 	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
-	echo "export $shlibpath_var"
+	$ECHO "export $shlibpath_var"
       fi
       $ECHO "$cmd$args"
       exit $EXIT_SUCCESS
@@ -1995,23 +1795,23 @@ func_mode_finish ()
     # Exit here if they wanted silent mode.
     $opt_silent && exit $EXIT_SUCCESS
 
-    echo "----------------------------------------------------------------------"
-    echo "Libraries have been installed in:"
+    $ECHO "X----------------------------------------------------------------------" | $Xsed
+    $ECHO "Libraries have been installed in:"
     for libdir in $libdirs; do
       $ECHO "   $libdir"
     done
-    echo
-    echo "If you ever happen to want to link against installed libraries"
-    echo "in a given directory, LIBDIR, you must either use libtool, and"
-    echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
-    echo "flag during linking and do at least one of the following:"
+    $ECHO
+    $ECHO "If you ever happen to want to link against installed libraries"
+    $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
+    $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
+    $ECHO "flag during linking and do at least one of the following:"
     if test -n "$shlibpath_var"; then
-      echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-      echo "     during execution"
+      $ECHO "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+      $ECHO "     during execution"
     fi
     if test -n "$runpath_var"; then
-      echo "   - add LIBDIR to the \`$runpath_var' environment variable"
-      echo "     during linking"
+      $ECHO "   - add LIBDIR to the \`$runpath_var' environment variable"
+      $ECHO "     during linking"
     fi
     if test -n "$hardcode_libdir_flag_spec"; then
       libdir=LIBDIR
@@ -2023,21 +1823,21 @@ func_mode_finish ()
       $ECHO "   - have your system administrator run these commands:$admincmds"
     fi
     if test -f /etc/ld.so.conf; then
-      echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+      $ECHO "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
     fi
-    echo
+    $ECHO
 
-    echo "See any operating system documentation about shared libraries for"
+    $ECHO "See any operating system documentation about shared libraries for"
     case $host in
       solaris2.[6789]|solaris2.1[0-9])
-        echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
-	echo "pages."
+        $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+	$ECHO "pages."
 	;;
       *)
-        echo "more information, such as the ld(1) and ld.so(8) manual pages."
+        $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
         ;;
     esac
-    echo "----------------------------------------------------------------------"
+    $ECHO "X----------------------------------------------------------------------" | $Xsed
     exit $EXIT_SUCCESS
 }
 
@@ -2052,7 +1852,7 @@ func_mode_install ()
     # install_prog (especially on Windows NT).
     if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
        # Allow the use of GNU shtool's install command.
-       case $nonopt in *shtool*) :;; *) false;; esac; then
+       $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
       # Aesthetically quote it.
       func_quote_for_eval "$nonopt"
       install_prog="$func_quote_for_eval_result "
@@ -2067,11 +1867,6 @@ func_mode_install ()
     # Aesthetically quote it.
     func_quote_for_eval "$arg"
     install_prog="$install_prog$func_quote_for_eval_result"
-    install_shared_prog=$install_prog
-    case " $install_prog " in
-      *[\\\ /]cp\ *) install_cp=: ;;
-      *) install_cp=false ;;
-    esac
 
     # We need to accept at least all the BSD install flags.
     dest=
@@ -2081,10 +1876,8 @@ func_mode_install ()
     install_type=
     isdir=no
     stripme=
-    no_mode=:
     for arg
     do
-      arg2=
       if test -n "$dest"; then
 	files="$files $dest"
 	dest=$arg
@@ -2094,9 +1887,10 @@ func_mode_install ()
       case $arg in
       -d) isdir=yes ;;
       -f)
-	if $install_cp; then :; else
-	  prev=$arg
-	fi
+	case " $install_prog " in
+	*[\\\ /]cp\ *) ;;
+	*) prev=$arg ;;
+	esac
 	;;
       -g | -m | -o)
 	prev=$arg
@@ -2110,10 +1904,6 @@ func_mode_install ()
       *)
 	# If the previous option needed an argument, then skip it.
 	if test -n "$prev"; then
-	  if test "x$prev" = x-m && test -n "$install_override_mode"; then
-	    arg2=$install_override_mode
-	    no_mode=false
-	  fi
 	  prev=
 	else
 	  dest=$arg
@@ -2125,10 +1915,6 @@ func_mode_install ()
       # Aesthetically quote the argument.
       func_quote_for_eval "$arg"
       install_prog="$install_prog $func_quote_for_eval_result"
-      if test -n "$arg2"; then
-	func_quote_for_eval "$arg2"
-      fi
-      install_shared_prog="$install_shared_prog $func_quote_for_eval_result"
     done
 
     test -z "$install_prog" && \
@@ -2137,13 +1923,6 @@ func_mode_install ()
     test -n "$prev" && \
       func_fatal_help "the \`$prev' option requires an argument"
 
-    if test -n "$install_override_mode" && $no_mode; then
-      if $install_cp; then :; else
-	func_quote_for_eval "$install_override_mode"
-	install_shared_prog="$install_shared_prog -m $func_quote_for_eval_result"
-      fi
-    fi
-
     if test -z "$files"; then
       if test -z "$dest"; then
 	func_fatal_help "no file or destination specified"
@@ -2231,7 +2010,7 @@ func_mode_install ()
 
 	if test -n "$relink_command"; then
 	  # Determine the prefix the user has applied to our future dir.
-	  inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+	  inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
 
 	  # Don't allow the user to place us outside of our expected
 	  # location b/c this prevents finding dependent libraries that
@@ -2244,9 +2023,9 @@ func_mode_install ()
 
 	  if test -n "$inst_prefix_dir"; then
 	    # Stick the inst_prefix_dir data into the link command.
-	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
 	  else
-	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
 	  fi
 
 	  func_warning "relinking \`$file'"
@@ -2264,7 +2043,7 @@ func_mode_install ()
 	  test -n "$relink_command" && srcname="$realname"T
 
 	  # Install the shared library and build the symlinks.
-	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+	  func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
 	      'exit $?'
 	  tstripme="$stripme"
 	  case $host_os in
@@ -2404,7 +2183,7 @@ func_mode_install ()
 	    if test -f "$lib"; then
 	      func_source "$lib"
 	    fi
-	    libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+	    libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
 	    if test -n "$libdir" && test ! -f "$libfile"; then
 	      func_warning "\`$lib' has not been installed in \`$libdir'"
 	      finalize=no
@@ -2423,7 +2202,7 @@ func_mode_install ()
 		file="$func_basename_result"
 	        outputname="$tmpdir/$file"
 	        # Replace the output file specification.
-	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+	        relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
 
 	        $opt_silent || {
 	          func_quote_for_expand "$relink_command"
@@ -2442,7 +2221,7 @@ func_mode_install ()
 	    }
 	  else
 	    # Install the binary that we compiled earlier.
-	    file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+	    file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
 	  fi
 	fi
 
@@ -2544,10 +2323,6 @@ func_generate_dlsyms ()
 extern \"C\" {
 #endif
 
-#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
-#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
-#endif
-
 /* External symbol declarations for the compiler. */\
 "
 
@@ -2557,7 +2332,7 @@ extern \"C\" {
 	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
 
 	  # Add our own program objects to the symbol list.
-	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	  progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
 	  for progfile in $progfiles; do
 	    func_verbose "extracting global C symbols from \`$progfile'"
 	    $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
@@ -2596,7 +2371,7 @@ extern \"C\" {
 	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
 	      eval '$MV "$nlist"T "$nlist"'
 	      case $host in
-	        *cygwin* | *mingw* | *cegcc* )
+	        *cygwin | *mingw* | *cegcc* )
 	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
 	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
 	          ;;
@@ -2640,10 +2415,10 @@ extern \"C\" {
 	  if test -f "$nlist"S; then
 	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
 	  else
-	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+	    $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
 	  fi
 
-	  echo >> "$output_objdir/$my_dlsyms" "\
+	  $ECHO >> "$output_objdir/$my_dlsyms" "\
 
 /* The mapping between symbol names and symbols.  */
 typedef struct {
@@ -2653,7 +2428,7 @@ typedef struct {
 "
 	  case $host in
 	  *cygwin* | *mingw* | *cegcc* )
-	    echo >> "$output_objdir/$my_dlsyms" "\
+	    $ECHO >> "$output_objdir/$my_dlsyms" "\
 /* DATA imports from DLLs on WIN32 con't be const, because
    runtime relocations are performed -- see ld's documentation
    on pseudo-relocs.  */"
@@ -2666,7 +2441,7 @@ typedef struct {
 	    lt_dlsym_const=const ;;
 	  esac
 
-	  echo >> "$output_objdir/$my_dlsyms" "\
+	  $ECHO >> "$output_objdir/$my_dlsyms" "\
 extern $lt_dlsym_const lt_dlsymlist
 lt_${my_prefix}_LTX_preloaded_symbols[];
 $lt_dlsym_const lt_dlsymlist
@@ -2682,7 +2457,7 @@ lt_${my_prefix}_LTX_preloaded_symbols[] =
 	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
 	    ;;
 	  esac
-	  echo >> "$output_objdir/$my_dlsyms" "\
+	  $ECHO >> "$output_objdir/$my_dlsyms" "\
   {0, (void *) 0}
 };
 
@@ -2740,16 +2515,16 @@ static const void *lt_preloaded_setup() {
 	case $host in
 	*cygwin* | *mingw* | *cegcc* )
 	  if test -f "$output_objdir/$my_outputname.def"; then
-	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
-	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
 	  else
-	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
-	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
 	  fi
 	  ;;
 	*)
-	  compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
-	  finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	  finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
 	  ;;
 	esac
 	;;
@@ -2763,8 +2538,8 @@ static const void *lt_preloaded_setup() {
       # really was required.
 
       # Nullify the symbol file.
-      compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
-      finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+      compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+      finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
     fi
 }
 
@@ -2774,7 +2549,6 @@ static const void *lt_preloaded_setup() {
 # Need a lot of goo to handle *both* DLLs and import libs
 # Has to be a shell function in order to 'eat' the argument
 # that is supplied when $file_magic_command is called.
-# Despite the name, also deal with 64 bit binaries.
 func_win32_libid ()
 {
   $opt_debug
@@ -2785,9 +2559,8 @@ func_win32_libid ()
     win32_libid_type="x86 archive import"
     ;;
   *ar\ archive*) # could be an import, or static
-    # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
-       $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+       $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
       win32_nmres=`eval $NM -f posix -A $1 |
 	$SED -n -e '
 	    1,100{
@@ -2825,18 +2598,7 @@ func_extract_an_archive ()
     $opt_debug
     f_ex_an_ar_dir="$1"; shift
     f_ex_an_ar_oldlib="$1"
-    if test "$lock_old_archive_extraction" = yes; then
-      lockfile=$f_ex_an_ar_oldlib.lock
-      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
-	func_echo "Waiting for $lockfile to be removed"
-	sleep 2
-      done
-    fi
-    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
-		   'stat=$?; rm -f "$lockfile"; exit $stat'
-    if test "$lock_old_archive_extraction" = yes; then
-      $opt_dry_run || rm -f "$lockfile"
-    fi
+    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
     if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
      :
     else
@@ -2907,7 +2669,7 @@ func_extract_archives ()
 	    darwin_file=
 	    darwin_files=
 	    for darwin_file in $darwin_filelist; do
-	      darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
 	      $LIPO -create -output "$darwin_file" $darwin_files
 	    done # $darwin_filelist
 	    $RM -rf unfat-$$
@@ -2922,30 +2684,25 @@ func_extract_archives ()
         func_extract_an_archive "$my_xdir" "$my_xabs"
 	;;
       esac
-      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
     done
 
     func_extract_archives_result="$my_oldobjs"
 }
 
 
-# func_emit_wrapper [arg=no]
-#
-# Emit a libtool wrapper script on stdout.
-# Don't directly open a file because we may want to
-# incorporate the script contents within a cygwin/mingw
-# wrapper executable.  Must ONLY be called from within
-# func_mode_link because it depends on a number of variables
-# set therein.
+
+# func_emit_wrapper_part1 [arg=no]
 #
-# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
-# variable will take.  If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
-# the $objdir directory.  This is a cygwin/mingw-specific
-# behavior.
-func_emit_wrapper ()
+# Emit the first part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part1 ()
 {
-	func_emit_wrapper_arg1=${1-no}
+	func_emit_wrapper_part1_arg1=no
+	if test -n "$1" ; then
+	  func_emit_wrapper_part1_arg1=$1
+	fi
 
 	$ECHO "\
 #! $SHELL
@@ -2961,6 +2718,7 @@ func_emit_wrapper ()
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
+Xsed='${SED} -e 1s/^X//'
 sed_quote_subst='$sed_quote_subst'
 
 # Be Bourne compatible
@@ -2991,132 +2749,31 @@ if test \"\$libtool_install_magic\" = \"$magic\"; then
 else
   # When we are sourced in execute mode, \$file and \$ECHO are already set.
   if test \"\$libtool_execute_magic\" != \"$magic\"; then
-    file=\"\$0\""
-
-    qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
-    $ECHO "\
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-\$1
-_LTECHO_EOF'
-}
-    ECHO=\"$qECHO\"
-  fi
-
-# Very basic option parsing. These options are (a) specific to
-# the libtool wrapper, (b) are identical between the wrapper
-# /script/ and the wrapper /executable/ which is used only on
-# windows platforms, and (c) all begin with the string "--lt-"
-# (application programs are unlikely to have options which match
-# this pattern).
-#
-# There are only two supported options: --lt-debug and
-# --lt-dump-script. There is, deliberately, no --lt-help.
-#
-# The first argument to this parsing function should be the
-# script's $0 value, followed by "$@".
-lt_option_debug=
-func_parse_lt_options ()
-{
-  lt_script_arg0=\$0
-  shift
-  for lt_opt
-  do
-    case \"\$lt_opt\" in
-    --lt-debug) lt_option_debug=1 ;;
-    --lt-dump-script)
-        lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
-        test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
-        lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
-        cat \"\$lt_dump_D/\$lt_dump_F\"
-        exit 0
-      ;;
-    --lt-*)
-        \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
-        exit 1
-      ;;
-    esac
-  done
-
-  # Print the debug banner immediately:
-  if test -n \"\$lt_option_debug\"; then
-    echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
-  fi
-}
-
-# Used when --lt-debug. Prints its arguments to stdout
-# (redirection is the responsibility of the caller)
-func_lt_dump_args ()
-{
-  lt_dump_args_N=1;
-  for lt_arg
-  do
-    \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
-    lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
-  done
-}
-
-# Core function for launching the target application
-func_exec_program_core ()
-{
-"
-  case $host in
-  # Backslashes separate directories on plain windows
-  *-*-mingw | *-*-os2* | *-cegcc*)
-    $ECHO "\
-      if test -n \"\$lt_option_debug\"; then
-        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
-        func_lt_dump_args \${1+\"\$@\"} 1>&2
-      fi
-      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
-    ;;
-
-  *)
-    $ECHO "\
-      if test -n \"\$lt_option_debug\"; then
-        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
-        func_lt_dump_args \${1+\"\$@\"} 1>&2
-      fi
-      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+    ECHO=\"$qecho\"
+    file=\"\$0\"
+    # Make sure echo works.
+    if test \"X\$1\" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
+      # Yippee, \$ECHO works!
+      :
+    else
+      # Restart under the correct shell, and then maybe \$ECHO will work.
+      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+    fi
+  fi\
 "
-    ;;
-  esac
-  $ECHO "\
-      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
-      exit 1
-}
-
-# A function to encapsulate launching the target application
-# Strips options in the --lt-* namespace from \$@ and
-# launches target application with the remaining arguments.
-func_exec_program ()
-{
-  for lt_wr_arg
-  do
-    case \$lt_wr_arg in
-    --lt-*) ;;
-    *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
-    esac
-    shift
-  done
-  func_exec_program_core \${1+\"\$@\"}
-}
-
-  # Parse options
-  func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+	$ECHO "\
 
   # Find the directory that this script lives in.
-  thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+  thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
   test \"x\$thisdir\" = \"x\$file\" && thisdir=.
 
   # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
   while test -n \"\$file\"; do
-    destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+    destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
 
     # If there was a directory component, then change thisdir.
     if test \"x\$destdir\" != \"x\$file\"; then
@@ -3126,13 +2783,30 @@ func_exec_program ()
       esac
     fi
 
-    file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+    file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
   done
+"
+}
+# end: func_emit_wrapper_part1
+
+# func_emit_wrapper_part2 [arg=no]
+#
+# Emit the second part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part2 ()
+{
+	func_emit_wrapper_part2_arg1=no
+	if test -n "$1" ; then
+	  func_emit_wrapper_part2_arg1=$1
+	fi
+
+	$ECHO "\
 
   # Usually 'no', except on cygwin/mingw when embedded into
   # the cwrapper.
-  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
   if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
     # special case for '.'
     if test \"\$thisdir\" = \".\"; then
@@ -3140,7 +2814,7 @@ func_exec_program ()
     fi
     # remove .libs from thisdir
     case \"\$thisdir\" in
-    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
     $objdir )   thisdir=. ;;
     esac
   fi
@@ -3203,7 +2877,7 @@ func_exec_program ()
 
     # Some systems cannot cope with colon-terminated $shlibpath_var
     # The second colon is a workaround for a bug in BeOS R4 sed
-    $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+    $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
 
     export $shlibpath_var
 "
@@ -3220,18 +2894,64 @@ func_exec_program ()
 	$ECHO "\
     if test \"\$libtool_execute_magic\" != \"$magic\"; then
       # Run the actual program with our arguments.
-      func_exec_program \${1+\"\$@\"}
+"
+	case $host in
+	# Backslashes separate directories on plain windows
+	*-*-mingw | *-*-os2* | *-cegcc*)
+	  $ECHO "\
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+	  ;;
+
+	*)
+	  $ECHO "\
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+	  ;;
+	esac
+	$ECHO "\
+      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+      exit 1
     fi
   else
     # The program doesn't exist.
     \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
     \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
-    \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+    $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
     exit 1
   fi
 fi\
 "
 }
+# end: func_emit_wrapper_part2
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable.  Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take.  If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+	func_emit_wrapper_arg1=no
+	if test -n "$1" ; then
+	  func_emit_wrapper_arg1=$1
+	fi
+
+	# split this up so that func_emit_cwrapperexe_src
+	# can call each part independently.
+	func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
+	func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
+}
 
 
 # func_to_host_path arg
@@ -3258,19 +2978,23 @@ fi\
 func_to_host_path ()
 {
   func_to_host_path_result="$1"
-  if test -n "$1"; then
+  if test -n "$1" ; then
     case $host in
       *mingw* )
         lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
         case $build in
           *mingw* ) # actually, msys
             # awkward: cmd appends spaces to result
-            func_to_host_path_result=`( cmd //c echo "$1" ) 2>/dev/null |
-              $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+            func_to_host_path_tmp1=`( cmd //c echo "$1" |\
+              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+              $SED -e "$lt_sed_naive_backslashify"`
             ;;
           *cygwin* )
-            func_to_host_path_result=`cygpath -w "$1" |
-	      $SED -e "$lt_sed_naive_backslashify"`
+            func_to_host_path_tmp1=`cygpath -w "$1"`
+            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+              $SED -e "$lt_sed_naive_backslashify"`
             ;;
           * )
             # Unfortunately, winepath does not exit with a non-zero
@@ -3282,17 +3006,17 @@ func_to_host_path ()
             # the odd construction:
             func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
             if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
-              func_to_host_path_result=`$ECHO "$func_to_host_path_tmp1" |
+              func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
                 $SED -e "$lt_sed_naive_backslashify"`
             else
               # Allow warning below.
-              func_to_host_path_result=
+              func_to_host_path_result=""
             fi
             ;;
         esac
         if test -z "$func_to_host_path_result" ; then
           func_error "Could not determine host path corresponding to"
-          func_error "  \`$1'"
+          func_error "  '$1'"
           func_error "Continuing, but uninstalled executables may not work."
           # Fallback:
           func_to_host_path_result="$1"
@@ -3325,24 +3049,30 @@ func_to_host_path ()
 func_to_host_pathlist ()
 {
   func_to_host_pathlist_result="$1"
-  if test -n "$1"; then
+  if test -n "$1" ; then
     case $host in
       *mingw* )
         lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
         # Remove leading and trailing path separator characters from
         # ARG. msys behavior is inconsistent here, cygpath turns them
         # into '.;' and ';.', and winepath ignores them completely.
-	func_stripname : : "$1"
-        func_to_host_pathlist_tmp1=$func_stripname_result
+        func_to_host_pathlist_tmp2="$1"
+        # Once set for this call, this variable should not be
+        # reassigned. It is used in tha fallback case.
+        func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
+          $SED -e 's|^:*||' -e 's|:*$||'`
         case $build in
           *mingw* ) # Actually, msys.
             # Awkward: cmd appends spaces to result.
-            func_to_host_pathlist_result=`
-	      ( cmd //c echo "$func_to_host_pathlist_tmp1" ) 2>/dev/null |
-	      $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+            func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
+              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+              $SED -e "$lt_sed_naive_backslashify"`
             ;;
           *cygwin* )
-            func_to_host_pathlist_result=`cygpath -w -p "$func_to_host_pathlist_tmp1" |
+            func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
+            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
               $SED -e "$lt_sed_naive_backslashify"`
             ;;
           * )
@@ -3358,17 +3088,18 @@ func_to_host_pathlist ()
                   if test -z "$func_to_host_pathlist_result" ; then
                     func_to_host_pathlist_result="$func_to_host_path_result"
                   else
-                    func_append func_to_host_pathlist_result ";$func_to_host_path_result"
+                    func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
                   fi
                 fi
               fi
+              IFS=:
             done
             IFS=$func_to_host_pathlist_oldIFS
             ;;
         esac
-        if test -z "$func_to_host_pathlist_result"; then
+        if test -z "$func_to_host_pathlist_result" ; then
           func_error "Could not determine the host path(s) corresponding to"
-          func_error "  \`$1'"
+          func_error "  '$1'"
           func_error "Continuing, but uninstalled executables may not work."
           # Fallback. This may break if $1 contains DOS-style drive
           # specifications. The fix is not to complicate the expression
@@ -3385,7 +3116,7 @@ func_to_host_pathlist ()
             ;;
         esac
         case "$1" in
-          *: ) func_append func_to_host_pathlist_result ";"
+          *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
             ;;
         esac
         ;;
@@ -3410,23 +3141,31 @@ func_emit_cwrapperexe_src ()
 
    This wrapper executable should never be moved out of the build directory.
    If it is, it will not operate correctly.
+
+   Currently, it simply execs the wrapper *script* "$SHELL $output",
+   but could eventually absorb all of the scripts functionality and
+   exec $objdir/$outputname directly.
 */
 EOF
 	    cat <<"EOF"
-#ifdef _MSC_VER
-# define _CRT_SECURE_NO_DEPRECATE 1
-#endif
 #include <stdio.h>
 #include <stdlib.h>
 #ifdef _MSC_VER
 # include <direct.h>
 # include <process.h>
 # include <io.h>
+# define setmode _setmode
 #else
 # include <unistd.h>
 # include <stdint.h>
 # ifdef __CYGWIN__
 #  include <io.h>
+#  define HAVE_SETENV
+#  ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+#  endif
 # endif
 #endif
 #include <malloc.h>
@@ -3438,44 +3177,6 @@ EOF
 #include <fcntl.h>
 #include <sys/stat.h>
 
-/* declarations of non-ANSI functions */
-#if defined(__MINGW32__)
-# ifdef __STRICT_ANSI__
-int _putenv (const char *);
-# endif
-#elif defined(__CYGWIN__)
-# ifdef __STRICT_ANSI__
-char *realpath (const char *, char *);
-int putenv (char *);
-int setenv (const char *, const char *, int);
-# endif
-/* #elif defined (other platforms) ... */
-#endif
-
-/* portability defines, excluding path handling macros */
-#if defined(_MSC_VER)
-# define setmode _setmode
-# define stat    _stat
-# define chmod   _chmod
-# define getcwd  _getcwd
-# define putenv  _putenv
-# define S_IXUSR _S_IEXEC
-# ifndef _INTPTR_T_DEFINED
-#  define _INTPTR_T_DEFINED
-#  define intptr_t int
-# endif
-#elif defined(__MINGW32__)
-# define setmode _setmode
-# define stat    _stat
-# define chmod   _chmod
-# define getcwd  _getcwd
-# define putenv  _putenv
-#elif defined(__CYGWIN__)
-# define HAVE_SETENV
-# define FOPEN_WB "wb"
-/* #elif defined (other platforms) ... */
-#endif
-
 #if defined(PATH_MAX)
 # define LT_PATHMAX PATH_MAX
 #elif defined(MAXPATHLEN)
@@ -3491,7 +3192,14 @@ int setenv (const char *, const char *, int);
 # define S_IXGRP 0
 #endif
 
-/* path handling portability macros */
+#ifdef _MSC_VER
+# define S_IXUSR _S_IEXEC
+# define stat _stat
+# ifndef _INTPTR_T_DEFINED
+#  define intptr_t int
+# endif
+#endif
+
 #ifndef DIR_SEPARATOR
 # define DIR_SEPARATOR '/'
 # define PATH_SEPARATOR ':'
@@ -3522,6 +3230,10 @@ int setenv (const char *, const char *, int);
 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
 #endif /* PATH_SEPARATOR_2 */
 
+#ifdef __CYGWIN__
+# define FOPEN_WB "wb"
+#endif
+
 #ifndef FOPEN_WB
 # define FOPEN_WB "w"
 #endif
@@ -3534,13 +3246,22 @@ int setenv (const char *, const char *, int);
   if (stale) { free ((void *) stale); stale = 0; } \
 } while (0)
 
-#if defined(LT_DEBUGWRAPPER)
-static int lt_debug = 1;
+#undef LTWRAPPER_DEBUGPRINTF
+#if defined DEBUGWRAPPER
+# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
+static void
+ltwrapper_debugprintf (const char *fmt, ...)
+{
+    va_list args;
+    va_start (args, fmt);
+    (void) vfprintf (stderr, fmt, args);
+    va_end (args);
+}
 #else
-static int lt_debug = 0;
+# define LTWRAPPER_DEBUGPRINTF(args)
 #endif
 
-const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+const char *program_name = NULL;
 
 void *xmalloc (size_t num);
 char *xstrdup (const char *string);
@@ -3550,17 +3271,31 @@ char *chase_symlinks (const char *pathspec);
 int make_executable (const char *path);
 int check_executable (const char *path);
 char *strendzap (char *str, const char *pat);
-void lt_debugprintf (const char *file, int line, const char *fmt, ...);
-void lt_fatal (const char *file, int line, const char *message, ...);
-static const char *nonnull (const char *s);
-static const char *nonempty (const char *s);
+void lt_fatal (const char *message, ...);
 void lt_setenv (const char *name, const char *value);
 char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_opt_process_env_set (const char *arg);
+void lt_opt_process_env_prepend (const char *arg);
+void lt_opt_process_env_append (const char *arg);
+int lt_split_name_value (const char *arg, char** name, char** value);
 void lt_update_exe_path (const char *name, const char *value);
 void lt_update_lib_path (const char *name, const char *value);
-char **prepare_spawn (char **argv);
-void lt_dump_script (FILE *f);
+
+static const char *script_text_part1 =
+EOF
+
+	    func_emit_wrapper_part1 yes |
+	        $SED -e 's/\([\\"]\)/\\\1/g' \
+	             -e 's/^/  "/' -e 's/$/\\n"/'
+	    echo ";"
+	    cat <<EOF
+
+static const char *script_text_part2 =
 EOF
+	    func_emit_wrapper_part2 yes |
+	        $SED -e 's/\([\\"]\)/\\\1/g' \
+	             -e 's/^/  "/' -e 's/$/\\n"/'
+	    echo ";"
 
 	    cat <<EOF
 const char * MAGIC_EXE = "$magic_exe";
@@ -3605,10 +3340,24 @@ EOF
 	    cat <<"EOF"
 
 #define LTWRAPPER_OPTION_PREFIX         "--lt-"
+#define LTWRAPPER_OPTION_PREFIX_LENGTH  5
 
+static const size_t opt_prefix_len         = LTWRAPPER_OPTION_PREFIX_LENGTH;
 static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+
 static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
-static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";
+
+static const size_t env_set_opt_len     = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
+static const char *env_set_opt          = LTWRAPPER_OPTION_PREFIX "env-set";
+  /* argument is putenv-style "foo=bar", value of foo is set to bar */
+
+static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
+static const char *env_prepend_opt      = LTWRAPPER_OPTION_PREFIX "env-prepend";
+  /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
+
+static const size_t env_append_opt_len  = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
+static const char *env_append_opt       = LTWRAPPER_OPTION_PREFIX "env-append";
+  /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
 
 int
 main (int argc, char *argv[])
@@ -3625,13 +3374,10 @@ main (int argc, char *argv[])
   int i;
 
   program_name = (char *) xstrdup (base_name (argv[0]));
-  newargz = XMALLOC (char *, argc + 1);
+  LTWRAPPER_DEBUGPRINTF (("(main) argv[0]      : %s\n", argv[0]));
+  LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
 
-  /* very simple arg parsing; don't want to rely on getopt
-   * also, copy all non cwrapper options to newargz, except
-   * argz[0], which is handled differently
-   */
-  newargc=0;
+  /* very simple arg parsing; don't want to rely on getopt */
   for (i = 1; i < argc; i++)
     {
       if (strcmp (argv[i], dumpscript_opt) == 0)
@@ -3645,57 +3391,25 @@ EOF
 	      esac
 
 	    cat <<"EOF"
-	  lt_dump_script (stdout);
+	  printf ("%s", script_text_part1);
+	  printf ("%s", script_text_part2);
 	  return 0;
 	}
-      if (strcmp (argv[i], debug_opt) == 0)
-	{
-          lt_debug = 1;
-          continue;
-	}
-      if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
-        {
-          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
-             namespace, but it is not one of the ones we know about and
-             have already dealt with, above (inluding dump-script), then
-             report an error. Otherwise, targets might begin to believe
-             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
-             namespace. The first time any user complains about this, we'll
-             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
-             or a configure.ac-settable value.
-           */
-          lt_fatal (__FILE__, __LINE__,
-		    "unrecognized %s option: '%s'",
-                    ltwrapper_option_prefix, argv[i]);
-        }
-      /* otherwise ... */
-      newargz[++newargc] = xstrdup (argv[i]);
     }
-  newargz[++newargc] = NULL;
-
-EOF
-	    cat <<EOF
-  /* The GNU banner must be the first non-error debug message */
-  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
-EOF
-	    cat <<"EOF"
-  lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
-  lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
 
+  newargz = XMALLOC (char *, argc + 1);
   tmp_pathspec = find_executable (argv[0]);
   if (tmp_pathspec == NULL)
-    lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
-  lt_debugprintf (__FILE__, __LINE__,
-                  "(main) found exe (before symlink chase) at: %s\n",
-		  tmp_pathspec);
+    lt_fatal ("Couldn't find %s", argv[0]);
+  LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
+			  tmp_pathspec));
 
   actual_cwrapper_path = chase_symlinks (tmp_pathspec);
-  lt_debugprintf (__FILE__, __LINE__,
-                  "(main) found exe (after symlink chase) at: %s\n",
-		  actual_cwrapper_path);
+  LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
+			  actual_cwrapper_path));
   XFREE (tmp_pathspec);
 
-  actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+  actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
   strendzap (actual_cwrapper_path, actual_cwrapper_name);
 
   /* wrapper name transforms */
@@ -3713,9 +3427,8 @@ EOF
   target_name = tmp_pathspec;
   tmp_pathspec = 0;
 
-  lt_debugprintf (__FILE__, __LINE__,
-		  "(main) libtool target name: %s\n",
-		  target_name);
+  LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
+			  target_name));
 EOF
 
 	    cat <<EOF
@@ -3768,12 +3481,77 @@ EOF
   lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
   lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
 
-  lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
-		  nonnull (lt_argv_zero));
+  newargc=0;
+  for (i = 1; i < argc; i++)
+    {
+      if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
+        {
+          if (argv[i][env_set_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_set_opt_len + 1;
+              lt_opt_process_env_set (p);
+            }
+          else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_set (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_set_opt);
+          continue;
+        }
+      if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
+        {
+          if (argv[i][env_prepend_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_prepend_opt_len + 1;
+              lt_opt_process_env_prepend (p);
+            }
+          else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_prepend (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_prepend_opt);
+          continue;
+        }
+      if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
+        {
+          if (argv[i][env_append_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_append_opt_len + 1;
+              lt_opt_process_env_append (p);
+            }
+          else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_append (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_append_opt);
+          continue;
+        }
+      if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
+        {
+          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+             namespace, but it is not one of the ones we know about and
+             have already dealt with, above (inluding dump-script), then
+             report an error. Otherwise, targets might begin to believe
+             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+             namespace. The first time any user complains about this, we'll
+             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+             or a configure.ac-settable value.
+           */
+          lt_fatal ("Unrecognized option in %s namespace: '%s'",
+                    ltwrapper_option_prefix, argv[i]);
+        }
+      /* otherwise ... */
+      newargz[++newargc] = xstrdup (argv[i]);
+    }
+  newargz[++newargc] = NULL;
+
+  LTWRAPPER_DEBUGPRINTF     (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
   for (i = 0; i < newargc; i++)
     {
-      lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
-		      i, nonnull (newargz[i]));
+      LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
     }
 
 EOF
@@ -3782,14 +3560,11 @@ EOF
 	      mingw*)
 		cat <<"EOF"
   /* execv doesn't actually work on mingw as expected on unix */
-  newargz = prepare_spawn (newargz);
   rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
   if (rval == -1)
     {
       /* failed to start process */
-      lt_debugprintf (__FILE__, __LINE__,
-		      "(main) failed to launch target \"%s\": %s\n",
-		      lt_argv_zero, nonnull (strerror (errno)));
+      LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
       return 127;
     }
   return rval;
@@ -3811,7 +3586,7 @@ xmalloc (size_t num)
 {
   void *p = (void *) malloc (num);
   if (!p)
-    lt_fatal (__FILE__, __LINE__, "memory exhausted");
+    lt_fatal ("Memory exhausted");
 
   return p;
 }
@@ -3845,8 +3620,8 @@ check_executable (const char *path)
 {
   struct stat st;
 
-  lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
-                  nonempty (path));
+  LTWRAPPER_DEBUGPRINTF (("(check_executable)  : %s\n",
+			  path ? (*path ? path : "EMPTY!") : "NULL!"));
   if ((!path) || (!*path))
     return 0;
 
@@ -3863,8 +3638,8 @@ make_executable (const char *path)
   int rval = 0;
   struct stat st;
 
-  lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
-                  nonempty (path));
+  LTWRAPPER_DEBUGPRINTF (("(make_executable)   : %s\n",
+			  path ? (*path ? path : "EMPTY!") : "NULL!"));
   if ((!path) || (!*path))
     return 0;
 
@@ -3890,8 +3665,8 @@ find_executable (const char *wrapper)
   int tmp_len;
   char *concat_name;
 
-  lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
-                  nonempty (wrapper));
+  LTWRAPPER_DEBUGPRINTF (("(find_executable)   : %s\n",
+			  wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
 
   if ((wrapper == NULL) || (*wrapper == '\0'))
     return NULL;
@@ -3944,8 +3719,7 @@ find_executable (const char *wrapper)
 		{
 		  /* empty path: current directory */
 		  if (getcwd (tmp, LT_PATHMAX) == NULL)
-		    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
-                              nonnull (strerror (errno)));
+		    lt_fatal ("getcwd failed");
 		  tmp_len = strlen (tmp);
 		  concat_name =
 		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
@@ -3970,8 +3744,7 @@ find_executable (const char *wrapper)
     }
   /* Relative path | not found in path: prepend cwd */
   if (getcwd (tmp, LT_PATHMAX) == NULL)
-    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
-              nonnull (strerror (errno)));
+    lt_fatal ("getcwd failed");
   tmp_len = strlen (tmp);
   concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
   memcpy (concat_name, tmp, tmp_len);
@@ -3997,9 +3770,8 @@ chase_symlinks (const char *pathspec)
   int has_symlinks = 0;
   while (strlen (tmp_pathspec) && !has_symlinks)
     {
-      lt_debugprintf (__FILE__, __LINE__,
-		      "checking path component for symlinks: %s\n",
-		      tmp_pathspec);
+      LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
+			      tmp_pathspec));
       if (lstat (tmp_pathspec, &s) == 0)
 	{
 	  if (S_ISLNK (s.st_mode) != 0)
@@ -4021,9 +3793,8 @@ chase_symlinks (const char *pathspec)
 	}
       else
 	{
-	  lt_fatal (__FILE__, __LINE__,
-		    "error accessing file \"%s\": %s",
-		    tmp_pathspec, nonnull (strerror (errno)));
+	  char *errstr = strerror (errno);
+	  lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
 	}
     }
   XFREE (tmp_pathspec);
@@ -4036,8 +3807,7 @@ chase_symlinks (const char *pathspec)
   tmp_pathspec = realpath (pathspec, buf);
   if (tmp_pathspec == 0)
     {
-      lt_fatal (__FILE__, __LINE__,
-		"could not follow symlinks for %s", pathspec);
+      lt_fatal ("Could not follow symlinks for %s", pathspec);
     }
   return xstrdup (tmp_pathspec);
 #endif
@@ -4063,25 +3833,11 @@ strendzap (char *str, const char *pat)
   return str;
 }
 
-void
-lt_debugprintf (const char *file, int line, const char *fmt, ...)
-{
-  va_list args;
-  if (lt_debug)
-    {
-      (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
-      va_start (args, fmt);
-      (void) vfprintf (stderr, fmt, args);
-      va_end (args);
-    }
-}
-
 static void
-lt_error_core (int exit_status, const char *file,
-	       int line, const char *mode,
+lt_error_core (int exit_status, const char *mode,
 	       const char *message, va_list ap)
 {
-  fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+  fprintf (stderr, "%s: %s: ", program_name, mode);
   vfprintf (stderr, message, ap);
   fprintf (stderr, ".\n");
 
@@ -4090,32 +3846,20 @@ lt_error_core (int exit_status, const char *file,
 }
 
 void
-lt_fatal (const char *file, int line, const char *message, ...)
+lt_fatal (const char *message, ...)
 {
   va_list ap;
   va_start (ap, message);
-  lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
   va_end (ap);
 }
 
-static const char *
-nonnull (const char *s)
-{
-  return s ? s : "(null)";
-}
-
-static const char *
-nonempty (const char *s)
-{
-  return (s && !*s) ? "(empty)" : nonnull (s);
-}
-
 void
 lt_setenv (const char *name, const char *value)
 {
-  lt_debugprintf (__FILE__, __LINE__,
-		  "(lt_setenv) setting '%s' to '%s'\n",
-                  nonnull (name), nonnull (value));
+  LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
   {
 #ifdef HAVE_SETENV
     /* always make a copy, for consistency with !HAVE_SETENV */
@@ -4160,12 +3904,95 @@ lt_extend_str (const char *orig_value, const char *add, int to_end)
   return new_value;
 }
 
+int
+lt_split_name_value (const char *arg, char** name, char** value)
+{
+  const char *p;
+  int len;
+  if (!arg || !*arg)
+    return 1;
+
+  p = strchr (arg, (int)'=');
+
+  if (!p)
+    return 1;
+
+  *value = xstrdup (++p);
+
+  len = strlen (arg) - strlen (*value);
+  *name = XMALLOC (char, len);
+  strncpy (*name, arg, len-1);
+  (*name)[len - 1] = '\0';
+
+  return 0;
+}
+
+void
+lt_opt_process_env_set (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
+    }
+
+  lt_setenv (name, value);
+  XFREE (name);
+  XFREE (value);
+}
+
+void
+lt_opt_process_env_prepend (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+  char *new_value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
+    }
+
+  new_value = lt_extend_str (getenv (name), value, 0);
+  lt_setenv (name, new_value);
+  XFREE (new_value);
+  XFREE (name);
+  XFREE (value);
+}
+
+void
+lt_opt_process_env_append (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+  char *new_value = NULL;
+
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
+    }
+
+  new_value = lt_extend_str (getenv (name), value, 1);
+  lt_setenv (name, new_value);
+  XFREE (new_value);
+  XFREE (name);
+  XFREE (value);
+}
+
 void
 lt_update_exe_path (const char *name, const char *value)
 {
-  lt_debugprintf (__FILE__, __LINE__,
-		  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
-                  nonnull (name), nonnull (value));
+  LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
 
   if (name && *name && value && *value)
     {
@@ -4184,9 +4011,9 @@ lt_update_exe_path (const char *name, const char *value)
 void
 lt_update_lib_path (const char *name, const char *value)
 {
-  lt_debugprintf (__FILE__, __LINE__,
-		  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
-                  nonnull (name), nonnull (value));
+  LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
 
   if (name && *name && value && *value)
     {
@@ -4196,152 +4023,11 @@ lt_update_lib_path (const char *name, const char *value)
     }
 }
 
-EOF
-	    case $host_os in
-	      mingw*)
-		cat <<"EOF"
-
-/* Prepares an argument vector before calling spawn().
-   Note that spawn() does not by itself call the command interpreter
-     (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
-      ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
-         GetVersionEx(&v);
-         v.dwPlatformId == VER_PLATFORM_WIN32_NT;
-      }) ? "cmd.exe" : "command.com").
-   Instead it simply concatenates the arguments, separated by ' ', and calls
-   CreateProcess().  We must quote the arguments since Win32 CreateProcess()
-   interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
-   special way:
-   - Space and tab are interpreted as delimiters. They are not treated as
-     delimiters if they are surrounded by double quotes: "...".
-   - Unescaped double quotes are removed from the input. Their only effect is
-     that within double quotes, space and tab are treated like normal
-     characters.
-   - Backslashes not followed by double quotes are not special.
-   - But 2*n+1 backslashes followed by a double quote become
-     n backslashes followed by a double quote (n >= 0):
-       \" -> "
-       \\\" -> \"
-       \\\\\" -> \\"
- */
-#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
-#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
-char **
-prepare_spawn (char **argv)
-{
-  size_t argc;
-  char **new_argv;
-  size_t i;
-
-  /* Count number of arguments.  */
-  for (argc = 0; argv[argc] != NULL; argc++)
-    ;
-
-  /* Allocate new argument vector.  */
-  new_argv = XMALLOC (char *, argc + 1);
-
-  /* Put quoted arguments into the new argument vector.  */
-  for (i = 0; i < argc; i++)
-    {
-      const char *string = argv[i];
-
-      if (string[0] == '\0')
-	new_argv[i] = xstrdup ("\"\"");
-      else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
-	{
-	  int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
-	  size_t length;
-	  unsigned int backslashes;
-	  const char *s;
-	  char *quoted_string;
-	  char *p;
-
-	  length = 0;
-	  backslashes = 0;
-	  if (quote_around)
-	    length++;
-	  for (s = string; *s != '\0'; s++)
-	    {
-	      char c = *s;
-	      if (c == '"')
-		length += backslashes + 1;
-	      length++;
-	      if (c == '\\')
-		backslashes++;
-	      else
-		backslashes = 0;
-	    }
-	  if (quote_around)
-	    length += backslashes + 1;
-
-	  quoted_string = XMALLOC (char, length + 1);
-
-	  p = quoted_string;
-	  backslashes = 0;
-	  if (quote_around)
-	    *p++ = '"';
-	  for (s = string; *s != '\0'; s++)
-	    {
-	      char c = *s;
-	      if (c == '"')
-		{
-		  unsigned int j;
-		  for (j = backslashes + 1; j > 0; j--)
-		    *p++ = '\\';
-		}
-	      *p++ = c;
-	      if (c == '\\')
-		backslashes++;
-	      else
-		backslashes = 0;
-	    }
-	  if (quote_around)
-	    {
-	      unsigned int j;
-	      for (j = backslashes; j > 0; j--)
-		*p++ = '\\';
-	      *p++ = '"';
-	    }
-	  *p = '\0';
-
-	  new_argv[i] = quoted_string;
-	}
-      else
-	new_argv[i] = (char *) string;
-    }
-  new_argv[argc] = NULL;
-
-  return new_argv;
-}
-EOF
-		;;
-	    esac
-
-            cat <<"EOF"
-void lt_dump_script (FILE* f)
-{
-EOF
-	    func_emit_wrapper yes |
-              $SED -e 's/\([\\"]\)/\\\1/g' \
-	           -e 's/^/  fputs ("/' -e 's/$/\\n", f);/'
 
-            cat <<"EOF"
-}
 EOF
 }
 # end: func_emit_cwrapperexe_src
 
-# func_win32_import_lib_p ARG
-# True if ARG is an import lib, as indicated by $file_magic_cmd
-func_win32_import_lib_p ()
-{
-    $opt_debug
-    case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
-    *import*) : ;;
-    *) false ;;
-    esac
-}
-
 # func_mode_link arg...
 func_mode_link ()
 {
@@ -4386,7 +4072,6 @@ func_mode_link ()
     new_inherited_linker_flags=
 
     avoid_version=no
-    bindir=
     dlfiles=
     dlprefiles=
     dlself=no
@@ -4479,11 +4164,6 @@ func_mode_link ()
 	esac
 
 	case $prev in
-	bindir)
-	  bindir="$arg"
-	  prev=
-	  continue
-	  ;;
 	dlfiles|dlprefiles)
 	  if test "$preload" = no; then
 	    # Add the symbol object into the linking commands.
@@ -4745,11 +4425,6 @@ func_mode_link ()
 	continue
 	;;
 
-      -bindir)
-	prev=bindir
-	continue
-	;;
-
       -dlopen)
 	prev=dlfiles
 	continue
@@ -4828,7 +4503,7 @@ func_mode_link ()
 	esac
 	case $host in
 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-	  testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
+	  testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$dir:"*) ;;
 	  ::) dllsearchpath=$dir;;
@@ -4847,7 +4522,7 @@ func_mode_link ()
       -l*)
 	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
 	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
 	    # These systems don't actually have a C or math library (as such)
 	    continue
 	    ;;
@@ -5033,7 +4708,7 @@ func_mode_link ()
 	for flag in $args; do
 	  IFS="$save_ifs"
           func_quote_for_eval "$flag"
-	  arg="$arg $func_quote_for_eval_result"
+	  arg="$arg $wl$func_quote_for_eval_result"
 	  compiler_flags="$compiler_flags $func_quote_for_eval_result"
 	done
 	IFS="$save_ifs"
@@ -5079,19 +4754,18 @@ func_mode_link ()
 	arg="$func_quote_for_eval_result"
 	;;
 
-      # Flags to be passed through unchanged, with rationale:
-      # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
-      # -r[0-9][0-9]*        specify processor for the SGI compiler
-      # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
-      # +DA*, +DD*           enable 64-bit mode for the HP compiler
-      # -q*                  compiler args for the IBM compiler
-      # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
-      # -F/path              path to uninstalled frameworks, gcc on darwin
-      # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
-      # @file                GCC response files
-      # -tp=*                Portland pgcc target processor selection
+      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+      # -r[0-9][0-9]* specifies the processor on the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+      # +DA*, +DD* enable 64-bit mode on the HP compiler
+      # -q* pass through compiler args for the IBM compiler
+      # -m*, -t[45]*, -txscale* pass through architecture-specific
+      # compiler args for GCC
+      # -F/path gives path to uninstalled frameworks, gcc on darwin
+      # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
+      # @file GCC response files
       -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
-      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*)
+      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
         func_quote_for_eval "$arg"
 	arg="$func_quote_for_eval_result"
         func_append compile_command " $arg"
@@ -5251,7 +4925,7 @@ func_mode_link ()
 
     if test -n "$shlibpath_var"; then
       # get the directories listed in $shlibpath_var
-      eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+      eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
     else
       shlib_search_path=
     fi
@@ -5359,7 +5033,10 @@ func_mode_link ()
 	case $pass in
 	dlopen) libs="$dlfiles" ;;
 	dlpreopen) libs="$dlprefiles" ;;
-	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+	link)
+	  libs="$deplibs %DEPLIBS%"
+	  test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
+	  ;;
 	esac
       fi
       if test "$linkmode,$pass" = "lib,dlpreopen"; then
@@ -5374,8 +5051,7 @@ func_mode_link ()
 	  # Collect preopened libtool deplibs, except any this library
 	  # has declared as weak libs
 	  for deplib in $dependency_libs; do
-	    func_basename "$deplib"
-            deplib_base=$func_basename_result
+            deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
 	    case " $weak_libs " in
 	    *" $deplib_base "*) ;;
 	    *) deplibs="$deplibs $deplib" ;;
@@ -5554,7 +5230,7 @@ func_mode_link ()
 		match_pattern*)
 		  set dummy $deplibs_check_method; shift
 		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
-		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
+		  if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
 		    | $EGREP "$match_pattern_regex" > /dev/null; then
 		    valid_a_lib=yes
 		  fi
@@ -5564,15 +5240,15 @@ func_mode_link ()
 		;;
 	      esac
 	      if test "$valid_a_lib" != yes; then
-		echo
+		$ECHO
 		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
-		echo "*** I have the capability to make that library automatically link in when"
-		echo "*** you link to this library.  But I can only do this if you have a"
-		echo "*** shared version of the library, which you do not appear to have"
-		echo "*** because the file extensions .$libext of this argument makes me believe"
-		echo "*** that it is just a static archive that I should not use here."
+		$ECHO "*** I have the capability to make that library automatically link in when"
+		$ECHO "*** you link to this library.  But I can only do this if you have a"
+		$ECHO "*** shared version of the library, which you do not appear to have"
+		$ECHO "*** because the file extensions .$libext of this argument makes me believe"
+		$ECHO "*** that it is just a static archive that I should not use here."
 	      else
-		echo
+		$ECHO
 		$ECHO "*** Warning: Linking the shared library $output against the"
 		$ECHO "*** static library $deplib is not portable!"
 		deplibs="$deplib $deplibs"
@@ -5645,7 +5321,7 @@ func_mode_link ()
 
 	# Convert "-framework foo" to "foo.ltframework"
 	if test -n "$inherited_linker_flags"; then
-	  tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
+	  tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
 	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
 	    case " $new_inherited_linker_flags " in
 	      *" $tmp_inherited_linker_flag "*) ;;
@@ -5653,7 +5329,7 @@ func_mode_link ()
 	    esac
 	  done
 	fi
-	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
 	if test "$linkmode,$pass" = "lib,link" ||
 	   test "$linkmode,$pass" = "prog,scan" ||
 	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
@@ -5671,19 +5347,19 @@ func_mode_link ()
 	    # It is a libtool convenience library, so add in its objects.
 	    convenience="$convenience $ladir/$objdir/$old_library"
 	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
+	    tmp_libs=
+	    for deplib in $dependency_libs; do
+	      deplibs="$deplib $deplibs"
+	      if $opt_duplicate_deps ; then
+		case "$tmp_libs " in
+		*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+		esac
+	      fi
+	      tmp_libs="$tmp_libs $deplib"
+	    done
 	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
 	    func_fatal_error "\`$lib' is not a convenience library"
 	  fi
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    deplibs="$deplib $deplibs"
-	    if $opt_duplicate_deps ; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	      esac
-	    fi
-	    tmp_libs="$tmp_libs $deplib"
-	  done
 	  continue
 	fi # $pass = conv
 
@@ -5907,7 +5583,7 @@ func_mode_link ()
 	    fi
 	  done
 	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
-	    echo
+	    $ECHO
 	    if test "$linkmode" = prog; then
 	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
 	    else
@@ -6010,9 +5686,9 @@ func_mode_link ()
 		      if test "X$dlopenmodule" != "X$lib"; then
 			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
 			if test -z "$old_library" ; then
-			  echo
-			  echo "*** And there doesn't seem to be a static archive available"
-			  echo "*** The link will probably fail, sorry"
+			  $ECHO
+			  $ECHO "*** And there doesn't seem to be a static archive available"
+			  $ECHO "*** The link will probably fail, sorry"
 			else
 			  add="$dir/$old_library"
 			fi
@@ -6152,21 +5828,21 @@ func_mode_link ()
 
 	    # Just print a warning and add the library to dependency_libs so
 	    # that the program can be linked against the static library.
-	    echo
+	    $ECHO
 	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
-	    echo "*** I have the capability to make that library automatically link in when"
-	    echo "*** you link to this library.  But I can only do this if you have a"
-	    echo "*** shared version of the library, which you do not appear to have."
+	    $ECHO "*** I have the capability to make that library automatically link in when"
+	    $ECHO "*** you link to this library.  But I can only do this if you have a"
+	    $ECHO "*** shared version of the library, which you do not appear to have."
 	    if test "$module" = yes; then
-	      echo "*** But as you try to build a module library, libtool will still create "
-	      echo "*** a static module, that should work as long as the dlopening application"
-	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      $ECHO "*** But as you try to build a module library, libtool will still create "
+	      $ECHO "*** a static module, that should work as long as the dlopening application"
+	      $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
 	      if test -z "$global_symbol_pipe"; then
-		echo
-		echo "*** However, this would only work if libtool was able to extract symbol"
-		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-		echo "*** not find such a program.  So, this module is probably useless."
-		echo "*** \`nm' from GNU binutils and a full rebuild may help."
+		$ECHO
+		$ECHO "*** However, this would only work if libtool was able to extract symbol"
+		$ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
+		$ECHO "*** not find such a program.  So, this module is probably useless."
+		$ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
 	      fi
 	      if test "$build_old_libs" = no; then
 		build_libtool_libs=module
@@ -6286,7 +5962,7 @@ func_mode_link ()
 	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
 	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
 	else
-	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
 	fi
       fi
       dependency_libs="$newdependency_libs"
@@ -6454,7 +6130,7 @@ func_mode_link ()
 	if test "$deplibs_check_method" != pass_all; then
 	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
 	else
-	  echo
+	  $ECHO
 	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
 	  $ECHO "*** objects $objs is not portable!"
 	  libobjs="$libobjs $objs"
@@ -6522,7 +6198,7 @@ func_mode_link ()
 	    age="$number_minor"
 	    revision="$number_revision"
 	    ;;
-	  freebsd-aout|freebsd-elf|qnx|sunos)
+	  freebsd-aout|freebsd-elf|sunos)
 	    current="$number_major"
 	    revision="$number_minor"
 	    age="0"
@@ -6534,6 +6210,9 @@ func_mode_link ()
 	    revision="$number_minor"
 	    lt_irix_increment=no
 	    ;;
+	  *)
+	    func_fatal_configuration "$modename: unknown library version type \`$version_type'"
+	    ;;
 	  esac
 	  ;;
 	no)
@@ -6756,14 +6435,14 @@ func_mode_link ()
 	oldlibs="$oldlibs $output_objdir/$libname.$libext"
 
 	# Transform .lo files to .o files.
-	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+	oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
       fi
 
       # Eliminate all temporary directories.
       #for path in $notinst_path; do
-      #	lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
-      #	deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
-      #	dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
+      #	lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
+      #	deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
+      #	dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
       #done
 
       if test -n "$xrpath"; then
@@ -6804,7 +6483,7 @@ func_mode_link ()
       if test "$build_libtool_libs" = yes; then
 	if test -n "$rpath"; then
 	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
 	    # these systems don't actually have a c library (as such)!
 	    ;;
 	  *-*-rhapsody* | *-*-darwin1.[012])
@@ -6889,13 +6568,13 @@ EOF
 		    newdeplibs="$newdeplibs $i"
 		  else
 		    droppeddeps=yes
-		    echo
+		    $ECHO
 		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-		    echo "*** I have the capability to make that library automatically link in when"
-		    echo "*** you link to this library.  But I can only do this if you have a"
-		    echo "*** shared version of the library, which I believe you do not have"
-		    echo "*** because a test_compile did reveal that the linker did not use it for"
-		    echo "*** its dynamic dependency list that programs get resolved with at runtime."
+		    $ECHO "*** I have the capability to make that library automatically link in when"
+		    $ECHO "*** you link to this library.  But I can only do this if you have a"
+		    $ECHO "*** shared version of the library, which I believe you do not have"
+		    $ECHO "*** because a test_compile did reveal that the linker did not use it for"
+		    $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
 		  fi
 		fi
 		;;
@@ -6932,22 +6611,22 @@ EOF
 		      newdeplibs="$newdeplibs $i"
 		    else
 		      droppeddeps=yes
-		      echo
+		      $ECHO
 		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-		      echo "*** I have the capability to make that library automatically link in when"
-		      echo "*** you link to this library.  But I can only do this if you have a"
-		      echo "*** shared version of the library, which you do not appear to have"
-		      echo "*** because a test_compile did reveal that the linker did not use this one"
-		      echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+		      $ECHO "*** I have the capability to make that library automatically link in when"
+		      $ECHO "*** you link to this library.  But I can only do this if you have a"
+		      $ECHO "*** shared version of the library, which you do not appear to have"
+		      $ECHO "*** because a test_compile did reveal that the linker did not use this one"
+		      $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
 		    fi
 		  fi
 		else
 		  droppeddeps=yes
-		  echo
+		  $ECHO
 		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
-		  echo "*** make it link in!  You will probably need to install it or some"
-		  echo "*** library that it depends on before this library will be fully"
-		  echo "*** functional.  Installing it before continuing would be even better."
+		  $ECHO "*** make it link in!  You will probably need to install it or some"
+		  $ECHO "*** library that it depends on before this library will be fully"
+		  $ECHO "*** functional.  Installing it before continuing would be even better."
 		fi
 		;;
 	      *)
@@ -6993,7 +6672,7 @@ EOF
 			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
 			case $potliblink in
 			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-			*) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+			*) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
 			esac
 		      done
 		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
@@ -7008,12 +6687,12 @@ EOF
 	      fi
 	      if test -n "$a_deplib" ; then
 		droppeddeps=yes
-		echo
+		$ECHO
 		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-		echo "*** I have the capability to make that library automatically link in when"
-		echo "*** you link to this library.  But I can only do this if you have a"
-		echo "*** shared version of the library, which you do not appear to have"
-		echo "*** because I did check the linker path looking for a file starting"
+		$ECHO "*** I have the capability to make that library automatically link in when"
+		$ECHO "*** you link to this library.  But I can only do this if you have a"
+		$ECHO "*** shared version of the library, which you do not appear to have"
+		$ECHO "*** because I did check the linker path looking for a file starting"
 		if test -z "$potlib" ; then
 		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
 		else
@@ -7051,7 +6730,7 @@ EOF
 		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
 		  for potent_lib in $potential_libs; do
 		    potlib="$potent_lib" # see symlink-check above in file_magic test
-		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+		    if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
 		       $EGREP "$match_pattern_regex" > /dev/null; then
 		      newdeplibs="$newdeplibs $a_deplib"
 		      a_deplib=""
@@ -7062,12 +6741,12 @@ EOF
 	      fi
 	      if test -n "$a_deplib" ; then
 		droppeddeps=yes
-		echo
+		$ECHO
 		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-		echo "*** I have the capability to make that library automatically link in when"
-		echo "*** you link to this library.  But I can only do this if you have a"
-		echo "*** shared version of the library, which you do not appear to have"
-		echo "*** because I did check the linker path looking for a file starting"
+		$ECHO "*** I have the capability to make that library automatically link in when"
+		$ECHO "*** you link to this library.  But I can only do this if you have a"
+		$ECHO "*** shared version of the library, which you do not appear to have"
+		$ECHO "*** because I did check the linker path looking for a file starting"
 		if test -z "$potlib" ; then
 		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
 		else
@@ -7085,25 +6764,25 @@ EOF
 	  ;;
 	none | unknown | *)
 	  newdeplibs=""
-	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
+	  tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
+	      -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
 	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 	    for i in $predeps $postdeps ; do
 	      # can't use Xsed below, because $i might contain '/'
-	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+	      tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
 	    done
 	  fi
-	  case $tmp_deplibs in
-	  *[!\	\ ]*)
-	    echo
+	  if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[	 ]//g' |
+	     $GREP . >/dev/null; then
+	    $ECHO
 	    if test "X$deplibs_check_method" = "Xnone"; then
-	      echo "*** Warning: inter-library dependencies are not supported in this platform."
+	      $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
 	    else
-	      echo "*** Warning: inter-library dependencies are not known to be supported."
+	      $ECHO "*** Warning: inter-library dependencies are not known to be supported."
 	    fi
-	    echo "*** All declared inter-library dependencies are being dropped."
+	    $ECHO "*** All declared inter-library dependencies are being dropped."
 	    droppeddeps=yes
-	    ;;
-	  esac
+	  fi
 	  ;;
 	esac
 	versuffix=$versuffix_save
@@ -7115,23 +6794,23 @@ EOF
 	case $host in
 	*-*-rhapsody* | *-*-darwin1.[012])
 	  # On Rhapsody replace the C library with the System framework
-	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
+	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
 	  ;;
 	esac
 
 	if test "$droppeddeps" = yes; then
 	  if test "$module" = yes; then
-	    echo
-	    echo "*** Warning: libtool could not satisfy all declared inter-library"
+	    $ECHO
+	    $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
 	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
-	    echo "*** a static module, that should work as long as the dlopening"
-	    echo "*** application is linked with the -dlopen flag."
+	    $ECHO "*** a static module, that should work as long as the dlopening"
+	    $ECHO "*** application is linked with the -dlopen flag."
 	    if test -z "$global_symbol_pipe"; then
-	      echo
-	      echo "*** However, this would only work if libtool was able to extract symbol"
-	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-	      echo "*** not find such a program.  So, this module is probably useless."
-	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	      $ECHO
+	      $ECHO "*** However, this would only work if libtool was able to extract symbol"
+	      $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      $ECHO "*** not find such a program.  So, this module is probably useless."
+	      $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
 	    fi
 	    if test "$build_old_libs" = no; then
 	      oldlibs="$output_objdir/$libname.$libext"
@@ -7141,16 +6820,16 @@ EOF
 	      build_libtool_libs=no
 	    fi
 	  else
-	    echo "*** The inter-library dependencies that have been dropped here will be"
-	    echo "*** automatically added whenever a program is linked with this library"
-	    echo "*** or is declared to -dlopen it."
+	    $ECHO "*** The inter-library dependencies that have been dropped here will be"
+	    $ECHO "*** automatically added whenever a program is linked with this library"
+	    $ECHO "*** or is declared to -dlopen it."
 
 	    if test "$allow_undefined" = no; then
-	      echo
-	      echo "*** Since this library must not contain undefined symbols,"
-	      echo "*** because either the platform does not support them or"
-	      echo "*** it was explicitly requested with -no-undefined,"
-	      echo "*** libtool will only create a static version of it."
+	      $ECHO
+	      $ECHO "*** Since this library must not contain undefined symbols,"
+	      $ECHO "*** because either the platform does not support them or"
+	      $ECHO "*** it was explicitly requested with -no-undefined,"
+	      $ECHO "*** libtool will only create a static version of it."
 	      if test "$build_old_libs" = no; then
 		oldlibs="$output_objdir/$libname.$libext"
 		build_libtool_libs=module
@@ -7167,9 +6846,9 @@ EOF
       # Time to change all our "foo.ltframework" stuff back to "-framework foo"
       case $host in
 	*-*-darwin*)
-	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-	  new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-	  deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
 	  ;;
       esac
 
@@ -7291,7 +6970,7 @@ EOF
 	done
 
 	# Use standard objects if they are pic
-	test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
 	test "X$libobjs" = "X " && libobjs=
 
 	delfiles=
@@ -7357,7 +7036,7 @@ EOF
 	if test -n "$export_symbols" && test -n "$include_expsyms"; then
 	  tmp_export_symbols="$export_symbols"
 	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
-	  $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	  $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
 	fi
 
 	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
@@ -7458,8 +7137,7 @@ EOF
 	    save_libobjs=$libobjs
 	  fi
 	  save_output=$output
-	  func_basename "$output"
-	  output_la=$func_basename_result
+	  output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
 
 	  # Clear the reloadable object creation command queue and
 	  # initialize k to one.
@@ -7472,12 +7150,12 @@ EOF
 	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
 	    output=${output_objdir}/${output_la}.lnkscript
 	    func_verbose "creating GNU ld script: $output"
-	    echo 'INPUT (' > $output
+	    $ECHO 'INPUT (' > $output
 	    for obj in $save_libobjs
 	    do
 	      $ECHO "$obj" >> $output
 	    done
-	    echo ')' >> $output
+	    $ECHO ')' >> $output
 	    delfiles="$delfiles $output"
 	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
 	    output=${output_objdir}/${output_la}.lnk
@@ -7519,19 +7197,17 @@ EOF
 		  # command to the queue.
 		  if test "$k" -eq 1 ; then
 		    # The first file doesn't have a previous command to add.
-		    reload_objs=$objlist
-		    eval concat_cmds=\"$reload_cmds\"
+		    eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
 		  else
 		    # All subsequent reloadable object files will link in
 		    # the last one created.
-		    reload_objs="$objlist $last_robj"
-		    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+		    eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
 		  fi
 		  last_robj=$output_objdir/$output_la-${k}.$objext
 		  func_arith $k + 1
 		  k=$func_arith_result
 		  output=$output_objdir/$output_la-${k}.$objext
-		  objlist=" $obj"
+		  objlist=$obj
 		  func_len " $last_robj"
 		  func_arith $len0 + $func_len_result
 		  len=$func_arith_result
@@ -7541,8 +7217,7 @@ EOF
 	      # reloadable object file.  All subsequent reloadable object
 	      # files will link in the last one created.
 	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	      reload_objs="$objlist $last_robj"
-	      eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+	      eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
 	      if test -n "$last_robj"; then
 	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
 	      fi
@@ -7601,7 +7276,7 @@ EOF
 	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
 	      tmp_export_symbols="$export_symbols"
 	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
-	      $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	      $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
 	    fi
 
 	    if test -n "$orig_export_symbols"; then
@@ -7766,7 +7441,7 @@ EOF
       if test -n "$convenience"; then
 	if test -n "$whole_archive_flag_spec"; then
 	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
-	  reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+	  reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
 	else
 	  gentop="$output_objdir/${obj}x"
 	  generated="$generated $gentop"
@@ -7777,7 +7452,7 @@ EOF
       fi
 
       # Create the old-style object.
-      reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+      reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
 
       output="$obj"
       func_execute_cmds "$reload_cmds" 'exit $?'
@@ -7837,8 +7512,8 @@ EOF
       case $host in
       *-*-rhapsody* | *-*-darwin1.[012])
 	# On Rhapsody replace the C library is the System framework
-	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
-	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
 	;;
       esac
 
@@ -7855,8 +7530,8 @@ EOF
 	  esac
 	fi
 	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
-	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
-	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
 	;;
       esac
 
@@ -7993,8 +7668,8 @@ EOF
 
       if test -n "$libobjs" && test "$build_old_libs" = yes; then
 	# Transform all the library objects into standard objects.
-	compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
-	finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
       fi
 
       func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
@@ -8006,15 +7681,15 @@ EOF
 
       wrappers_required=yes
       case $host in
-      *cegcc* | *mingw32ce*)
-        # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
-        wrappers_required=no
-        ;;
       *cygwin* | *mingw* )
         if test "$build_libtool_libs" != yes; then
           wrappers_required=no
         fi
         ;;
+      *cegcc)
+        # Disable wrappers for cegcc, we are cross compiling anyway.
+        wrappers_required=no
+        ;;
       *)
         if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
           wrappers_required=no
@@ -8023,7 +7698,7 @@ EOF
       esac
       if test "$wrappers_required" = no; then
 	# Replace the output file specification.
-	compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
 	link_command="$compile_command$compile_rpath"
 
 	# We have no uninstalled library dependencies, so finalize right now.
@@ -8070,7 +7745,7 @@ EOF
 	# We don't need to create a wrapper script.
 	link_command="$compile_var$compile_command$compile_rpath"
 	# Replace the output file specification.
-	link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
 	# Delete the old output file.
 	$opt_dry_run || $RM $output
 	# Link the executable and exit
@@ -8089,7 +7764,7 @@ EOF
 	if test "$fast_install" != no; then
 	  link_command="$finalize_var$compile_command$finalize_rpath"
 	  if test "$fast_install" = yes; then
-	    relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+	    relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
 	  else
 	    # fast_install is set to needless
 	    relink_command=
@@ -8101,7 +7776,7 @@ EOF
       fi
 
       # Replace the output file specification.
-      link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+      link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
 
       # Delete the old output files.
       $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
@@ -8125,7 +7800,18 @@ EOF
 	  fi
 	done
 	relink_command="(cd `pwd`; $relink_command)"
-	relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+	relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      fi
+
+      # Quote $ECHO for shipping.
+      if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
+	case $progpath in
+	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
+	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
+	esac
+	qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
+      else
+	qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
       fi
 
       # Only actually do things if not in dry run mode.
@@ -8246,7 +7932,7 @@ EOF
 	    done | sort | sort -uc >/dev/null 2>&1); then
 	  :
 	else
-	  echo "copying selected object files to avoid basename conflicts..."
+	  $ECHO "copying selected object files to avoid basename conflicts..."
 	  gentop="$output_objdir/${outputname}x"
 	  generated="$generated $gentop"
 	  func_mkdir_p "$gentop"
@@ -8357,7 +8043,7 @@ EOF
       done
       # Quote the link command for shipping.
       relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
-      relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+      relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
       if test "$hardcode_automatic" = yes ; then
 	relink_command=
       fi
@@ -8442,27 +8128,9 @@ EOF
 	  fi
 	  $RM $output
 	  # place dlname in correct position for cygwin
-	  # In fact, it would be nice if we could use this code for all target
-	  # systems that can't hard-code library paths into their executables
-	  # and that have no shared library path variable independent of PATH,
-	  # but it turns out we can't easily determine that from inspecting
-	  # libtool variables, so we have to hard-code the OSs to which it
-	  # applies here; at the moment, that means platforms that use the PE
-	  # object format with DLL files.  See the long comment at the top of
-	  # tests/bindir.at for full details.
 	  tdlname=$dlname
 	  case $host,$output,$installed,$module,$dlname in
-	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
-	      # If a -bindir argument was supplied, place the dll there.
-	      if test "x$bindir" != x ;
-	      then
-		func_relative_path "$install_libdir" "$bindir"
-		tdlname=$func_relative_path_result$dlname
-	      else
-		# Otherwise fall back on heuristic.
-		tdlname=../bin/$dlname
-	      fi
-	      ;;
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
 	  esac
 	  $ECHO > $output "\
 # $outputname - a libtool library file
diff --git a/m4/libtool.m4 b/m4/libtool.m4
index 8c99a62..a3fee53 100644
--- a/m4/libtool.m4
+++ b/m4/libtool.m4
@@ -1,8 +1,7 @@
 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
 #
 #   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
-#                 Inc.
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
 #   Written by Gordon Matzigkeit, 1996
 #
 # This file is free software; the Free Software Foundation gives
@@ -11,8 +10,7 @@
 
 m4_define([_LT_COPYING], [dnl
 #   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
-#                 Inc.
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
 #   Written by Gordon Matzigkeit, 1996
 #
 #   This file is part of GNU Libtool.
@@ -39,7 +37,7 @@ m4_define([_LT_COPYING], [dnl
 # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 ])
 
-# serial 57 LT_INIT
+# serial 56 LT_INIT
 
 
 # LT_PREREQ(VERSION)
@@ -68,7 +66,6 @@ esac
 # ------------------
 AC_DEFUN([LT_INIT],
 [AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
-AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
 AC_BEFORE([$0], [LT_LANG])dnl
 AC_BEFORE([$0], [LT_OUTPUT])dnl
 AC_BEFORE([$0], [LTDL_INIT])dnl
@@ -85,8 +82,6 @@ AC_REQUIRE([LTVERSION_VERSION])dnl
 AC_REQUIRE([LTOBSOLETE_VERSION])dnl
 m4_require([_LT_PROG_LTMAIN])dnl
 
-_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
-
 dnl Parse OPTIONS
 _LT_SET_OPTIONS([$0], [$1])
 
@@ -123,7 +118,7 @@ m4_defun([_LT_CC_BASENAME],
     *) break;;
   esac
 done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 ])
 
 
@@ -143,9 +138,6 @@ m4_defun([_LT_FILEUTILS_DEFAULTS],
 m4_defun([_LT_SETUP],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
-AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
-
 _LT_DECL([], [host_alias], [0], [The host system])dnl
 _LT_DECL([], [host], [0])dnl
 _LT_DECL([], [host_os], [0])dnl
@@ -187,6 +179,7 @@ fi
 _LT_CHECK_OBJDIR
 
 m4_require([_LT_TAG_COMPILER])dnl
+_LT_PROG_ECHO_BACKSLASH
 
 case $host_os in
 aix3*)
@@ -200,6 +193,23 @@ aix3*)
   ;;
 esac
 
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
 # Global variables:
 ofile=libtool
 can_build_shared=yes
@@ -240,28 +250,6 @@ _LT_CONFIG_COMMANDS
 ])# _LT_SETUP
 
 
-# _LT_PREPARE_SED_QUOTE_VARS
-# --------------------------
-# Define a few sed substitution that help us do robust quoting.
-m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
-[# Backslashify metacharacters that are still active within
-# double-quoted strings.
-sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([["`\\]]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-])
-
 # _LT_PROG_LTMAIN
 # ---------------
 # Note that this code is called both from `configure', and `config.status'
@@ -420,7 +408,7 @@ m4_define([_lt_decl_all_varnames],
 # declaration there will have the same value as in `configure'.  VARNAME
 # must have a single quote delimited value for this to work.
 m4_define([_LT_CONFIG_STATUS_DECLARE],
-[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
+[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
 
 
 # _LT_CONFIG_STATUS_DECLARATIONS
@@ -430,7 +418,7 @@ m4_define([_LT_CONFIG_STATUS_DECLARE],
 # embedded single quotes properly.  In configure, this macro expands
 # each variable declared with _LT_DECL (and _LT_TAGDECL) into:
 #
-#    <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
+#    <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
 m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
 [m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
     [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
@@ -529,20 +517,12 @@ LTCC='$LTCC'
 LTCFLAGS='$LTCFLAGS'
 compiler='$compiler_DEFAULT'
 
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-\$[]1
-_LTECHO_EOF'
-}
-
 # Quote evaled strings.
 for var in lt_decl_all_varnames([[ \
 ]], lt_decl_quote_varnames); do
-    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
     *[[\\\\\\\`\\"\\\$]]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -553,9 +533,9 @@ done
 # Double-quote double-evaled strings.
 for var in lt_decl_all_varnames([[ \
 ]], lt_decl_dquote_varnames); do
-    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
     *[[\\\\\\\`\\"\\\$]]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
       ;;
     *)
       eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -563,38 +543,16 @@ for var in lt_decl_all_varnames([[ \
     esac
 done
 
+# Fix-up fallback echo if it was mangled by the above quoting rules.
+case \$lt_ECHO in
+*'\\\[$]0 --fallback-echo"')dnl "
+  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
+  ;;
+esac
+
 _LT_OUTPUT_LIBTOOL_INIT
 ])
 
-# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
-# ------------------------------------
-# Generate a child script FILE with all initialization necessary to
-# reuse the environment learned by the parent script, and make the
-# file executable.  If COMMENT is supplied, it is inserted after the
-# `#!' sequence but before initialization text begins.  After this
-# macro, additional text can be appended to FILE to form the body of
-# the child script.  The macro ends with non-zero status if the
-# file could not be fully written (such as if the disk is full).
-m4_ifdef([AS_INIT_GENERATED],
-[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
-[m4_defun([_LT_GENERATED_FILE_INIT],
-[m4_require([AS_PREPARE])]dnl
-[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
-[lt_write_fail=0
-cat >$1 <<_ASEOF || lt_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-$2
-SHELL=\${CONFIG_SHELL-$SHELL}
-export SHELL
-_ASEOF
-cat >>$1 <<\_ASEOF || lt_write_fail=1
-AS_SHELL_SANITIZE
-_AS_PREPARE
-exec AS_MESSAGE_FD>&1
-_ASEOF
-test $lt_write_fail = 0 && chmod +x $1[]dnl
-m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
 
 # LT_OUTPUT
 # ---------
@@ -604,11 +562,20 @@ m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
 AC_DEFUN([LT_OUTPUT],
 [: ${CONFIG_LT=./config.lt}
 AC_MSG_NOTICE([creating $CONFIG_LT])
-_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
-[# Run this file to recreate a libtool stub with the current configuration.])
+cat >"$CONFIG_LT" <<_LTEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate a libtool stub with the current configuration.
 
-cat >>"$CONFIG_LT" <<\_LTEOF
 lt_cl_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AS_SHELL_SANITIZE
+_AS_PREPARE
+
+exec AS_MESSAGE_FD>&1
 exec AS_MESSAGE_LOG_FD>>config.log
 {
   echo
@@ -634,7 +601,7 @@ m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
 m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
 configured by $[0], generated by m4_PACKAGE_STRING.
 
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2008 Free Software Foundation, Inc.
 This config.lt script is free software; the Free Software Foundation
 gives unlimited permision to copy, distribute and modify it."
 
@@ -679,13 +646,15 @@ chmod +x "$CONFIG_LT"
 # appending to config.log, which fails on DOS, as config.log is still kept
 # open by configure.  Here we exec the FD to /dev/null, effectively closing
 # config.log, so it can be properly (re)opened and appended to by config.lt.
-lt_cl_success=:
-test "$silent" = yes &&
-  lt_config_lt_args="$lt_config_lt_args --quiet"
-exec AS_MESSAGE_LOG_FD>/dev/null
-$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
-exec AS_MESSAGE_LOG_FD>>config.log
-$lt_cl_success || AS_EXIT(1)
+if test "$no_create" != yes; then
+  lt_cl_success=:
+  test "$silent" = yes &&
+    lt_config_lt_args="$lt_config_lt_args --quiet"
+  exec AS_MESSAGE_LOG_FD>/dev/null
+  $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+  exec AS_MESSAGE_LOG_FD>>config.log
+  $lt_cl_success || AS_EXIT(1)
+fi
 ])# LT_OUTPUT
 
 
@@ -862,13 +831,11 @@ AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
 AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
 AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
 AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
-AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
 dnl aclocal-1.4 backwards compatibility:
 dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
 dnl AC_DEFUN([AC_LIBTOOL_F77], [])
 dnl AC_DEFUN([AC_LIBTOOL_FC], [])
 dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
-dnl AC_DEFUN([AC_LIBTOOL_RC], [])
 
 
 # _LT_TAG_COMPILER
@@ -973,31 +940,6 @@ m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
 	[lt_cv_ld_exported_symbols_list=no])
 	LDFLAGS="$save_LDFLAGS"
     ])
-    AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
-      [lt_cv_ld_force_load=no
-      cat > conftest.c << _LT_EOF
-int forced_loaded() { return 2;}
-_LT_EOF
-      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
-      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
-      echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
-      $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
-      echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
-      $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
-      cat > conftest.c << _LT_EOF
-int main() { return 0;}
-_LT_EOF
-      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
-      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
-      _lt_result=$?
-      if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then
-	lt_cv_ld_force_load=yes
-      else
-	cat conftest.err >&AS_MESSAGE_LOG_FD
-      fi
-        rm -f conftest.err libconftest.a conftest conftest.c
-        rm -rf conftest.dSYM
-    ])
     case $host_os in
     rhapsody* | darwin1.[[012]])
       _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
@@ -1025,7 +967,7 @@ _LT_EOF
     else
       _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
     fi
-    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+    if test "$DSYMUTIL" != ":"; then
       _lt_dsymutil='~$DSYMUTIL $lib || :'
     else
       _lt_dsymutil=
@@ -1045,11 +987,7 @@ m4_defun([_LT_DARWIN_LINKER_FEATURES],
   _LT_TAGVAR(hardcode_direct, $1)=no
   _LT_TAGVAR(hardcode_automatic, $1)=yes
   _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  if test "$lt_cv_ld_force_load" = "yes"; then
-    _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
-  else
-    _LT_TAGVAR(whole_archive_flag_spec, $1)=''
-  fi
+  _LT_TAGVAR(whole_archive_flag_spec, $1)=''
   _LT_TAGVAR(link_all_deplibs, $1)=yes
   _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
   case $cc_basename in
@@ -1057,7 +995,7 @@ m4_defun([_LT_DARWIN_LINKER_FEATURES],
      *) _lt_dar_can_shared=$GCC ;;
   esac
   if test "$_lt_dar_can_shared" = "yes"; then
-    output_verbose_link_cmd=func_echo_all
+    output_verbose_link_cmd=echo
     _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
     _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
     _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
@@ -1103,65 +1041,170 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 # _LT_SHELL_INIT(ARG)
 # -------------------
 m4_define([_LT_SHELL_INIT],
-[m4_divert_text([M4SH-INIT], [$1
-])])# _LT_SHELL_INIT
-
+[ifdef([AC_DIVERSION_NOTICE],
+	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+	 [AC_DIVERT_PUSH(NOTICE)])
+$1
+AC_DIVERT_POP
+])# _LT_SHELL_INIT
 
 
 # _LT_PROG_ECHO_BACKSLASH
 # -----------------------
-# Find how we can fake an echo command that does not interpret backslash.
-# In particular, with Autoconf 2.60 or later we add some code to the start
-# of the generated configure script which will find a shell with a builtin
-# printf (which we can use as an echo command).
+# Add some code to the start of the generated configure script which
+# will find an echo command which doesn't interpret backslashes.
 m4_defun([_LT_PROG_ECHO_BACKSLASH],
-[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
-
-AC_MSG_CHECKING([how to print strings])
-# Test print first, because it will be a builtin if present.
-if test "X`print -r -- -n 2>/dev/null`" = X-n && \
-   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
-  ECHO='print -r --'
-elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
-  ECHO='printf %s\n'
+[_LT_SHELL_INIT([
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$lt_ECHO in
+X*--fallback-echo)
+  # Remove one level of quotation (which was required for Make).
+  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+  ;;
+esac
+
+ECHO=${lt_ECHO-echo}
+if test "X[$]1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X[$]1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+  # Yippee, $ECHO works!
+  :
 else
-  # Use this function as a fallback that always works.
-  func_fallback_echo ()
-  {
-    eval 'cat <<_LTECHO_EOF
-$[]1
-_LTECHO_EOF'
-  }
-  ECHO='func_fallback_echo'
+  # Restart under the correct shell.
+  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
 fi
 
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
-    $ECHO "$*" 
-}
+if test "X[$]1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<_LT_EOF
+[$]*
+_LT_EOF
+  exit 0
+fi
 
-case "$ECHO" in
-  printf*) AC_MSG_RESULT([printf]) ;;
-  print*) AC_MSG_RESULT([print -r]) ;;
-  *) AC_MSG_RESULT([cat]) ;;
-esac
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test -z "$lt_ECHO"; then
+  if test "X${echo_test_string+set}" != Xset; then
+    # find a string as large as possible, as long as the shell can cope with it
+    for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+	 { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+      then
+        break
+      fi
+    done
+  fi
+
+  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+     test "X$echo_testing_string" = "X$echo_test_string"; then
+    :
+  else
+    # The Solaris, AIX, and Digital Unix default echo programs unquote
+    # backslashes.  This makes it impossible to quote backslashes using
+    #   echo "$something" | sed 's/\\/\\\\/g'
+    #
+    # So, first we look for a working echo in the user's PATH.
+
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for dir in $PATH /usr/ucb; do
+      IFS="$lt_save_ifs"
+      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        ECHO="$dir/echo"
+        break
+      fi
+    done
+    IFS="$lt_save_ifs"
+
+    if test "X$ECHO" = Xecho; then
+      # We didn't find a better echo, so look for alternatives.
+      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        # This shell has a builtin print -r that does the trick.
+        ECHO='print -r'
+      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+	   test "X$CONFIG_SHELL" != X/bin/ksh; then
+        # If we have ksh, try running configure again with it.
+        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+        export ORIGINAL_CONFIG_SHELL
+        CONFIG_SHELL=/bin/ksh
+        export CONFIG_SHELL
+        exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+      else
+        # Try using printf.
+        ECHO='printf %s\n'
+        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+	   echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	  # Cool, printf works
+	  :
+        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	  export CONFIG_SHELL
+	  SHELL="$CONFIG_SHELL"
+	  export SHELL
+	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+        elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+        else
+	  # maybe with a smaller string...
+	  prev=:
 
-m4_ifdef([_AS_DETECT_SUGGESTED],
-[_AS_DETECT_SUGGESTED([
-  test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
-    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
-    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
-    PATH=/empty FPATH=/empty; export PATH FPATH
-    test "X`printf %s $ECHO`" = "X$ECHO" \
-      || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
+	  for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+	    if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+	    then
+	      break
+	    fi
+	    prev="$cmd"
+	  done
 
+	  if test "$prev" != 'sed 50q "[$]0"'; then
+	    echo_test_string=`eval $prev`
+	    export echo_test_string
+	    exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+	  else
+	    # Oops.  We lost completely, so just stick with echo.
+	    ECHO=echo
+	  fi
+        fi
+      fi
+    fi
+  fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+   lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+fi
+
+AC_SUBST(lt_ECHO)
+])
 _LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
-_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
+_LT_DECL([], [ECHO], [1],
+    [An echo program that does not interpret backslashes])
 ])# _LT_PROG_ECHO_BACKSLASH
 
 
@@ -1193,7 +1236,7 @@ ia64-*-hpux*)
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     if test "$lt_cv_prog_gnu_ld" = yes; then
       case `/usr/bin/file conftest.$ac_objext` in
@@ -1345,19 +1388,10 @@ if test -n "$RANLIB"; then
   esac
   old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
 fi
-
-case $host_os in
-  darwin*)
-    lock_old_archive_extraction=yes ;;
-  *)
-    lock_old_archive_extraction=no ;;
-esac
 _LT_DECL([], [old_postinstall_cmds], [2])
 _LT_DECL([], [old_postuninstall_cmds], [2])
 _LT_TAGDECL([], [old_archive_cmds], [2],
     [Commands used to build an old-style archive])
-_LT_DECL([], [lock_old_archive_extraction], [0],
-    [Whether to use a lock for old archive extraction])
 ])# _LT_CMD_OLD_ARCHIVE
 
 
@@ -1382,15 +1416,15 @@ AC_CACHE_CHECK([$1], [$2],
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
-     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        $2=yes
@@ -1430,7 +1464,7 @@ AC_CACHE_CHECK([$1], [$2],
      if test -s conftest.err; then
        # Append any errors to the config.log.
        cat conftest.err 1>&AS_MESSAGE_LOG_FD
-       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
        if diff conftest.exp conftest.er2 >/dev/null; then
          $2=yes
@@ -1493,11 +1527,6 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
     lt_cv_sys_max_cmd_len=8192;
     ;;
 
-  mint*)
-    # On MiNT this can take a long time and run out of memory.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
   amigaos*)
     # On AmigaOS with pdksh, this test takes hours, literally.
     # So we just punt and use a minimum line length of 8192.
@@ -1562,8 +1591,8 @@ AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
       # If test is not a shell built-in, we'll probably end up computing a
       # maximum length that is only half of the actual maximum length, but
       # we can't tell.
-      while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \
-	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+      while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+	         = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
 	      test $i != 17 # 1/2 MB should be enough
       do
         i=`expr $i + 1`
@@ -1614,7 +1643,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-[#line $LINENO "configure"
+[#line __oline__ "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -1655,13 +1684,7 @@ else
 #  endif
 #endif
 
-/* When -fvisbility=hidden is used, assume the code has been annotated
-   correspondingly for the symbols needed.  */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
-void fnord () __attribute__((visibility("default")));
-#endif
-
-void fnord () { int i=42; }
+void fnord() { int i=42;}
 int main ()
 {
   void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
@@ -1670,11 +1693,7 @@ int main ()
   if (self)
     {
       if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else
-        {
-	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
-          else puts (dlerror ());
-	}
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
       /* dlclose (self); */
     }
   else
@@ -1850,16 +1869,16 @@ AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
        _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
@@ -2018,7 +2037,6 @@ m4_require([_LT_DECL_EGREP])dnl
 m4_require([_LT_FILEUTILS_DEFAULTS])dnl
 m4_require([_LT_DECL_OBJDUMP])dnl
 m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_CHECK_SHELL_FEATURES])dnl
 AC_MSG_CHECKING([dynamic linker characteristics])
 m4_if([$1],
 	[], [
@@ -2027,23 +2045,16 @@ if test "$GCC" = yes; then
     darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
     *) lt_awk_arg="/^libraries:/" ;;
   esac
-  case $host_os in
-    mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
-    *) lt_sed_strip_eq="s,=/,/,g" ;;
-  esac
-  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
-  case $lt_search_path_spec in
-  *\;*)
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
     # if the path contains ";" then we assume it to be the separator
     # otherwise default to the standard path separator (i.e. ":") - it is
     # assumed that no part of a normal pathname contains ";" but that should
     # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
-    ;;
-  *)
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
-    ;;
-  esac
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
   # Ok, now we have the path, separated by spaces, we can step through it
   # and add multilib dir if necessary.
   lt_tmp_lt_search_path_spec=
@@ -2056,7 +2067,7 @@ if test "$GCC" = yes; then
 	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
     fi
   done
-  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
 BEGIN {RS=" "; FS="/|\n";} {
   lt_foo="";
   lt_count=0;
@@ -2076,13 +2087,7 @@ BEGIN {RS=" "; FS="/|\n";} {
   if (lt_foo != "") { lt_freq[[lt_foo]]++; }
   if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
 }'`
-  # AWK program above erroneously prepends '/' to C:/dos/paths
-  # for these hosts.
-  case $host_os in
-    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
-      $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
-  esac
-  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
 else
   sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
 fi])
@@ -2170,7 +2175,7 @@ amigaos*)
   m68k)
     library_names_spec='$libname.ixlibrary $libname.a'
     # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
     ;;
   esac
   ;;
@@ -2223,12 +2228,23 @@ cygwin* | mingw* | pw32* | cegcc*)
     cygwin*)
       # Cygwin DLLs use 'cyg' prefix rather than 'lib'
       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-m4_if([$1], [],[
-      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
       ;;
     mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
       soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
       ;;
     pw32*)
       # pw32 DLLs use 'pw' prefix rather than 'lib'
@@ -2328,19 +2344,6 @@ gnu*)
   hardcode_into_libs=yes
   ;;
 
-haiku*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  dynamic_linker="$host_os runtime_loader"
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
-  hardcode_into_libs=yes
-  ;;
-
 hpux9* | hpux10* | hpux11*)
   # Give a soname corresponding to the major version so that dld.sl refuses to
   # link against other versions.
@@ -2383,10 +2386,8 @@ hpux9* | hpux10* | hpux11*)
     soname_spec='${libname}${release}${shared_ext}$major'
     ;;
   esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
   postinstall_cmds='chmod 555 $lib'
-  # or fails outright, so override atomically:
-  install_override_mode=555
   ;;
 
 interix[[3-9]]*)
@@ -2453,35 +2454,26 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
-
   # Some binutils ld are patched to set DT_RUNPATH
-  AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
-    [lt_cv_shlibpath_overrides_runpath=no
-    save_LDFLAGS=$LDFLAGS
-    save_libdir=$libdir
-    eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
-	 LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
-    AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
-      [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
-	 [lt_cv_shlibpath_overrides_runpath=yes])])
-    LDFLAGS=$save_LDFLAGS
-    libdir=$save_libdir
-    ])
-  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+  save_LDFLAGS=$LDFLAGS
+  save_libdir=$libdir
+  eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+       LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+  AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+    [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+       [shlibpath_overrides_runpath=yes])])
+  LDFLAGS=$save_LDFLAGS
+  libdir=$save_libdir
 
   # This implies no fast_install, which is unacceptable.
   # Some rework will be needed to allow for fast_install
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # Add ABI-specific directories to the system library path.
-  sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
-
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
-
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
   fi
 
   # We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -2493,6 +2485,18 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
   dynamic_linker='GNU/Linux ld.so'
   ;;
 
+netbsdelf*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='NetBSD ld.elf_so'
+  ;;
+
 netbsd*)
   version_type=sunos
   need_lib_prefix=no
@@ -2713,8 +2717,6 @@ _LT_DECL([], [library_names_spec], [1],
     The last name is the one that the linker finds with -lNAME]])
 _LT_DECL([], [soname_spec], [1],
     [[The coded name of the library, if different from the real name]])
-_LT_DECL([], [install_override_mode], [1],
-    [Permission mode override for installation of shared libraries])
 _LT_DECL([], [postinstall_cmds], [2],
     [Command to use after installation of a shared archive])
 _LT_DECL([], [postuninstall_cmds], [2],
@@ -2827,7 +2829,6 @@ AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_CANONICAL_BUILD])dnl
 m4_require([_LT_DECL_SED])dnl
 m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
 
 AC_ARG_WITH([gnu-ld],
     [AS_HELP_STRING([--with-gnu-ld],
@@ -2957,8 +2958,8 @@ case $host_os in
     fi
     ;;
 esac
-_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
-_LT_TAGDECL([], [reload_cmds], [2])dnl
+_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_DECL([], [reload_cmds], [2])dnl
 ])# _LT_CMD_RELOAD
 
 
@@ -3010,18 +3011,16 @@ mingw* | pw32*)
   # Base MSYS/MinGW do not provide the 'file' command needed by
   # func_win32_libid shell function, so use a weaker test based on 'objdump',
   # unless we find 'file', for example because we are cross-compiling.
-  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
-  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+  if ( file / ) >/dev/null 2>&1; then
     lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
     lt_cv_file_magic_cmd='func_win32_libid'
   else
-    # Keep this pattern in sync with the one in func_win32_libid.
-    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
     lt_cv_file_magic_cmd='$OBJDUMP -f'
   fi
   ;;
 
-cegcc*)
+cegcc)
   # use the weaker test based on 'objdump'. See mingw*.
   lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
   lt_cv_file_magic_cmd='$OBJDUMP -f'
@@ -3051,10 +3050,6 @@ gnu*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-haiku*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
 hpux10.20* | hpux11*)
   lt_cv_file_magic_cmd=/usr/bin/file
   case $host_cpu in
@@ -3063,11 +3058,11 @@ hpux10.20* | hpux11*)
     lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
     ;;
   hppa*64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
+    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
     lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
     ;;
   *)
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
     lt_cv_file_magic_test_file=/usr/lib/libc.sl
     ;;
   esac
@@ -3093,7 +3088,7 @@ linux* | k*bsd*-gnu | kopensolaris*-gnu)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-netbsd*)
+netbsd* | netbsdelf*-gnu)
   if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
   else
@@ -3231,19 +3226,7 @@ if test "$lt_cv_path_NM" != "no"; then
   NM="$lt_cv_path_NM"
 else
   # Didn't find any BSD compatible name lister, look for dumpbin.
-  if test -n "$DUMPBIN"; then :
-    # Let the user override the test.
-  else
-    AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
-    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
-    *COFF*)
-      DUMPBIN="$DUMPBIN -symbols"
-      ;;
-    *)
-      DUMPBIN=:
-      ;;
-    esac
-  fi
+  AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
   AC_SUBST([DUMPBIN])
   if test "$DUMPBIN" != ":"; then
     NM="$DUMPBIN"
@@ -3256,13 +3239,13 @@ _LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
 AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
   [lt_cv_nm_interface="BSD nm"
   echo "int some_variable = 0;" > conftest.$ac_ext
-  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+  (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
   (eval "$ac_compile" 2>conftest.err)
   cat conftest.err >&AS_MESSAGE_LOG_FD
-  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+  (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
   (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
   cat conftest.err >&AS_MESSAGE_LOG_FD
-  (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
+  (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
   cat conftest.out >&AS_MESSAGE_LOG_FD
   if $GREP 'External.*some_variable' conftest.out > /dev/null; then
     lt_cv_nm_interface="MS dumpbin"
@@ -3285,7 +3268,7 @@ AC_DEFUN([LT_LIB_M],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 LIBM=
 case $host in
-*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
+*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
   # These system don't have libm, or don't need it
   ;;
 *-ncr-sysv4.3*)
@@ -3313,12 +3296,7 @@ m4_defun([_LT_COMPILER_NO_RTTI],
 _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
 
 if test "$GCC" = yes; then
-  case $cc_basename in
-  nvcc*)
-    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
-  *)
-    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
-  esac
+  _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
 
   _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
     lt_cv_prog_compiler_rtti_exceptions,
@@ -3335,7 +3313,6 @@ _LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
 m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_AWK])dnl
 AC_REQUIRE([LT_PATH_NM])dnl
 AC_REQUIRE([LT_PATH_LD])dnl
 m4_require([_LT_DECL_SED])dnl
@@ -3461,7 +3438,7 @@ _LT_EOF
   if AC_TRY_EVAL(ac_compile); then
     # Now try to grab the symbols.
     nlist=conftest.nm
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
+    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
       # Try sorting and uniquifying the output.
       if sort "$nlist" | uniq > "$nlist"T; then
 	mv -f "$nlist"T "$nlist"
@@ -3623,11 +3600,6 @@ m4_if([$1], [CXX], [
       # DJGPP does not support shared libraries at all
       _LT_TAGVAR(lt_prog_compiler_pic, $1)=
       ;;
-    haiku*)
-      # PIC is the default for Haiku.
-      # The "-static" flag exists, but is broken.
-      _LT_TAGVAR(lt_prog_compiler_static, $1)=
-      ;;
     interix[[3-9]]*)
       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
       # Instead, we relocate shared libraries at runtime.
@@ -3766,8 +3738,8 @@ m4_if([$1], [CXX], [
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
 	    ;;
-	  xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
-	    # IBM XL 8.0, 9.0 on PPC and BlueGene
+	  xlc* | xlC*)
+	    # IBM XL 8.0 on PPC
 	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
@@ -3797,7 +3769,7 @@ m4_if([$1], [CXX], [
 	    ;;
 	esac
 	;;
-      netbsd*)
+      netbsd* | netbsdelf*-gnu)
 	;;
       *qnx* | *nto*)
         # QNX uses GNU C++, but need to define -shared option too, otherwise
@@ -3829,7 +3801,7 @@ m4_if([$1], [CXX], [
 	;;
       solaris*)
 	case $cc_basename in
-	  CC* | sunCC*)
+	  CC*)
 	    # Sun C++ 4.2, 5.x and Centerline C++
 	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
@@ -3933,12 +3905,6 @@ m4_if([$1], [CXX], [
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
       ;;
 
-    haiku*)
-      # PIC is the default for Haiku.
-      # The "-static" flag exists, but is broken.
-      _LT_TAGVAR(lt_prog_compiler_static, $1)=
-      ;;
-
     hpux*)
       # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
       # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
@@ -3981,13 +3947,6 @@ m4_if([$1], [CXX], [
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
       ;;
     esac
-
-    case $cc_basename in
-    nvcc*) # Cuda Compiler Driver 2.2
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Xcompiler -fPIC'
-      ;;
-    esac
   else
     # PORTME Check for flag to pass linker flags through the system compiler.
     case $host_os in
@@ -4051,7 +4010,7 @@ m4_if([$1], [CXX], [
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
 	;;
-      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+      pgcc* | pgf77* | pgf90* | pgf95*)
         # Portland Group compilers (*not* the Pentium gcc compiler,
 	# which looks to be a dead project)
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
@@ -4063,26 +4022,26 @@ m4_if([$1], [CXX], [
         # All Alpha code is PIC.
         _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
         ;;
-      xl* | bgxl* | bgf* | mpixl*)
-	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+      xl*)
+	# IBM XL C 8.0/Fortran 10.1 on PPC
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
 	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
 	;;
       *)
 	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ F* | *Sun*Fortran*)
-	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
-	  ;;
 	*Sun\ C*)
 	  # Sun C 5.9
 	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
 	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	  ;;
+	*Sun\ F*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+	  ;;
 	esac
 	;;
       esac
@@ -4113,7 +4072,7 @@ m4_if([$1], [CXX], [
       _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
       _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       case $cc_basename in
-      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+      f77* | f90* | f95*)
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
       *)
 	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
@@ -4223,10 +4182,8 @@ m4_if([$1], [CXX], [
   aix[[4-9]]*)
     # If we're using GNU nm, then we don't want the "-C" option.
     # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    # Also, AIX nm treats weak defined symbols like other global defined
-    # symbols, whereas GNU nm marks them as "W".
     if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
     else
       _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
     fi
@@ -4237,6 +4194,9 @@ m4_if([$1], [CXX], [
   cygwin* | mingw* | cegcc*)
     _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
+  linux* | k*bsd*-gnu)
+    _LT_TAGVAR(link_all_deplibs, $1)=no
+  ;;
   *)
     _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
@@ -4301,36 +4261,13 @@ dnl Note also adjust exclude_expsyms for C++ above.
   openbsd*)
     with_gnu_ld=no
     ;;
+  linux* | k*bsd*-gnu)
+    _LT_TAGVAR(link_all_deplibs, $1)=no
+    ;;
   esac
 
   _LT_TAGVAR(ld_shlibs, $1)=yes
-
-  # On some targets, GNU ld is compatible enough with the native linker
-  # that we're better off using the native interface for both.
-  lt_use_gnu_ld_interface=no
   if test "$with_gnu_ld" = yes; then
-    case $host_os in
-      aix*)
-	# The AIX port of GNU ld has always aspired to compatibility
-	# with the native linker.  However, as the warning in the GNU ld
-	# block says, versions before 2.19.5* couldn't really create working
-	# shared libraries, regardless of the interface used.
-	case `$LD -v 2>&1` in
-	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
-	  *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
-	  *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
-	  *)
-	    lt_use_gnu_ld_interface=yes
-	    ;;
-	esac
-	;;
-      *)
-	lt_use_gnu_ld_interface=yes
-	;;
-    esac
-  fi
-
-  if test "$lt_use_gnu_ld_interface" = yes; then
     # If archive_cmds runs LD, not CC, wlarc should be empty
     wlarc='${wl}'
 
@@ -4364,12 +4301,11 @@ dnl Note also adjust exclude_expsyms for C++ above.
 	_LT_TAGVAR(ld_shlibs, $1)=no
 	cat <<_LT_EOF 1>&2
 
-*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
 *** to be unable to reliably create shared libraries on AIX.
 *** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to install binutils
-*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
-*** You will then need to restart the configuration process.
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
 
 _LT_EOF
       fi
@@ -4405,7 +4341,6 @@ _LT_EOF
       # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
       # as there is no search path for DLLs.
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
       _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
       _LT_TAGVAR(always_export_symbols, $1)=no
       _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
@@ -4427,11 +4362,6 @@ _LT_EOF
       fi
       ;;
 
-    haiku*)
-      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      _LT_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
-
     interix[[3-9]]*)
       _LT_TAGVAR(hardcode_direct, $1)=no
       _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
@@ -4461,12 +4391,11 @@ _LT_EOF
 	tmp_sharedflag='-shared'
 	case $cc_basename,$host_cpu in
         pgcc*)				# Portland Group C compiler
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag'
 	  ;;
-	pgf77* | pgf90* | pgf95* | pgfortran*)
-					# Portland Group f77 and f90 compilers
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	  tmp_addflag=' $pic_flag -Mnomain' ;;
 	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
 	  tmp_addflag=' -i_dynamic' ;;
@@ -4477,17 +4406,13 @@ _LT_EOF
 	lf95*)				# Lahey Fortran 8.1
 	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
 	  tmp_sharedflag='--shared' ;;
-	xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	xl[[cC]]*)			# IBM XL C 8.0 on PPC (deal with xlf below)
 	  tmp_sharedflag='-qmkshrobj'
 	  tmp_addflag= ;;
-	nvcc*)	# Cuda Compiler Driver 2.2
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
-	  _LT_TAGVAR(compiler_needs_object, $1)=yes
-	  ;;
 	esac
 	case `$CC -V 2>&1 | sed 5q` in
 	*Sun\ C*)			# Sun C 5.9
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	  _LT_TAGVAR(compiler_needs_object, $1)=yes
 	  tmp_sharedflag='-G' ;;
 	*Sun\ F*)			# Sun Fortran 8.3
@@ -4503,17 +4428,17 @@ _LT_EOF
         fi
 
 	case $cc_basename in
-	xlf* | bgf* | bgxlf* | mpixlf*)
+	xlf*)
 	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
 	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
 	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
 	  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
 	  if test "x$supports_anon_versioning" = xyes; then
 	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
 	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
 	      echo "local: *; };" >> $output_objdir/$libname.ver~
-	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	      $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
 	  fi
 	  ;;
 	esac
@@ -4522,7 +4447,7 @@ _LT_EOF
       fi
       ;;
 
-    netbsd*)
+    netbsd* | netbsdelf*-gnu)
       if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
@@ -4634,10 +4559,8 @@ _LT_EOF
       else
 	# If we're using GNU nm, then we don't want the "-C" option.
 	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	# Also, AIX nm treats weak defined symbols like other global
-	# defined symbols, whereas GNU nm marks them as "W".
 	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	else
 	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
 	fi
@@ -4699,6 +4622,7 @@ _LT_EOF
 	if test "$aix_use_runtimelinking" = yes; then
 	  shared_flag="$shared_flag "'${wl}-G'
 	fi
+	_LT_TAGVAR(link_all_deplibs, $1)=no
       else
 	# not using gcc
 	if test "$host_cpu" = ia64; then
@@ -4726,7 +4650,7 @@ _LT_EOF
         # empty executable.
         _LT_SYS_MODULE_PATH_AIX
         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
       else
 	if test "$host_cpu" = ia64; then
 	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
@@ -4741,13 +4665,8 @@ _LT_EOF
 	  # -berok will link without error, but may produce a broken library.
 	  _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
 	  _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	  if test "$with_gnu_ld" = yes; then
-	    # We only use this code for GNU lds that support --whole-archive.
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	  else
-	    # Exported symbols can be pulled into shared objects from archives
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-	  fi
+	  # Exported symbols can be pulled into shared objects from archives
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
 	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
 	  # This is similar to how AIX traditionally builds its shared libraries.
 	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
@@ -4786,7 +4705,7 @@ _LT_EOF
       # Tell ltmain to make .dll files, not .so files.
       shrext_cmds=".dll"
       # FIXME: Setting linknames here is a bad hack.
-      _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+      _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
       # The linker will automatically build a .lib file if we build a DLL.
       _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
       # FIXME: Should let the user specify the lib program.
@@ -4853,7 +4772,7 @@ _LT_EOF
       ;;
 
     hpux10*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
 	_LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
       else
 	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
@@ -4872,7 +4791,7 @@ _LT_EOF
       ;;
 
     hpux11*)
-      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
 	case $host_cpu in
 	hppa*64*)
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
@@ -4893,14 +4812,7 @@ _LT_EOF
 	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	m4_if($1, [], [
-	  # Older versions of the 11.00 compiler do not understand -b yet
-	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
-	  _LT_LINKER_OPTION([if $CC understands -b],
-	    _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
-	    [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
-	    [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
-	  [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
       fi
@@ -4928,19 +4840,19 @@ _LT_EOF
 
     irix5* | irix6* | nonstopux*)
       if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	# Try to use the -exported_symbol ld option, if it does not
 	# work, assume that -exports_file does not work either and
 	# implicitly export all symbols.
         save_LDFLAGS="$LDFLAGS"
         LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
         AC_LINK_IFELSE(int foo(void) {},
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
         )
         LDFLAGS="$save_LDFLAGS"
       else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
       fi
       _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
@@ -4949,7 +4861,7 @@ _LT_EOF
       _LT_TAGVAR(link_all_deplibs, $1)=yes
       ;;
 
-    netbsd*)
+    netbsd* | netbsdelf*-gnu)
       if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
 	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
       else
@@ -5002,17 +4914,17 @@ _LT_EOF
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
       _LT_TAGVAR(hardcode_minus_L, $1)=yes
       _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
       _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
       ;;
 
     osf3*)
       if test "$GCC" = yes; then
 	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
       else
 	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
       fi
       _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
       _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
@@ -5022,13 +4934,13 @@ _LT_EOF
     osf4* | osf5*)	# as osf3* with the addition of -msym flag
       if test "$GCC" = yes; then
 	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
       else
 	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
 	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
 
 	# Both c and cxx compiler support -rpath directly
 	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -5219,38 +5131,36 @@ x|xyes)
       # Test whether the compiler implicitly links with -lc since on some
       # systems, -lgcc has to come before -lc. If gcc already passes -lc
       # to ld, don't add -lc before -lgcc.
-      AC_CACHE_CHECK([whether -lc should be explicitly linked in],
-	[lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
-	[$RM conftest*
-	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-	if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-	  soname=conftest
-	  lib=conftest
-	  libobjs=conftest.$ac_objext
-	  deplibs=
-	  wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
-	  pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
-	  compiler_flags=-v
-	  linker_flags=-v
-	  verstring=
-	  output_objdir=.
-	  libname=conftest
-	  lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
-	  _LT_TAGVAR(allow_undefined_flag, $1)=
-	  if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
-	  then
-	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-	  else
-	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-	  fi
-	  _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-	else
-	  cat conftest.err 1>&5
-	fi
-	$RM conftest*
-	])
-      _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
+      AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+      $RM conftest*
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+      if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+	pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+        _LT_TAGVAR(allow_undefined_flag, $1)=
+        if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+        then
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+        else
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+        fi
+        _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $RM conftest*
+      AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
       ;;
     esac
   fi
@@ -5420,14 +5330,14 @@ CC="$lt_save_CC"
 ])# _LT_LANG_C_CONFIG
 
 
-# _LT_LANG_CXX_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a C++ compiler are suitably
-# defined.  These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_CXX_CONFIG],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_EGREP])dnl
+# _LT_PROG_CXX
+# ------------
+# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
+# compiler, we have our own version here.
+m4_defun([_LT_PROG_CXX],
+[
+pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
+AC_PROG_CXX
 if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
     ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
     (test "X$CXX" != "Xg++"))) ; then
@@ -5435,6 +5345,22 @@ if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
 else
   _lt_caught_CXX_error=yes
 fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_CXX
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_CXX], [])
+
+
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[AC_REQUIRE([_LT_PROG_CXX])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
 
 AC_LANG_PUSH(C++)
 _LT_TAGVAR(archive_cmds_need_lc, $1)=no
@@ -5456,8 +5382,6 @@ _LT_TAGVAR(module_cmds, $1)=
 _LT_TAGVAR(module_expsym_cmds, $1)=
 _LT_TAGVAR(link_all_deplibs, $1)=unknown
 _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
 _LT_TAGVAR(no_undefined_flag, $1)=
 _LT_TAGVAR(whole_archive_flag_spec, $1)=
 _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
@@ -5560,7 +5484,7 @@ if test "$_lt_caught_CXX_error" != yes; then
       # Commands to make compiler produce verbose output that lists
       # what "hidden" libraries, object files and flags are used when
       # linking a shared library.
-      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
 
     else
       GXX=no
@@ -5672,7 +5596,7 @@ if test "$_lt_caught_CXX_error" != yes; then
           _LT_SYS_MODULE_PATH_AIX
           _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
 
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
         else
           if test "$host_cpu" = ia64; then
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
@@ -5687,13 +5611,8 @@ if test "$_lt_caught_CXX_error" != yes; then
 	    # -berok will link without error, but may produce a broken library.
 	    _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
 	    _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	    if test "$with_gnu_ld" = yes; then
-	      # We only use this code for GNU lds that support --whole-archive.
-	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	    else
-	      # Exported symbols can be pulled into shared objects from archives
-	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-	    fi
+	    # Exported symbols can be pulled into shared objects from archives
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
 	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
 	    # This is similar to how AIX traditionally builds its shared
 	    # libraries.
@@ -5726,7 +5645,6 @@ if test "$_lt_caught_CXX_error" != yes; then
         # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
         # as there is no search path for DLLs.
         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
         _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
         _LT_TAGVAR(always_export_symbols, $1)=no
         _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
@@ -5787,11 +5705,6 @@ if test "$_lt_caught_CXX_error" != yes; then
       gnu*)
         ;;
 
-      haiku*)
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        _LT_TAGVAR(link_all_deplibs, $1)=yes
-        ;;
-
       hpux9*)
         _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
         _LT_TAGVAR(hardcode_libdir_separator, $1)=:
@@ -5816,7 +5729,7 @@ if test "$_lt_caught_CXX_error" != yes; then
             # explicitly linking system object files so we need to strip them
             # from the output so that they don't get included in the library
             # dependencies.
-            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
             ;;
           *)
             if test "$GXX" = yes; then
@@ -5881,7 +5794,7 @@ if test "$_lt_caught_CXX_error" != yes; then
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
 	    ;;
           *)
 	    if test "$GXX" = yes; then
@@ -5924,7 +5837,7 @@ if test "$_lt_caught_CXX_error" != yes; then
         case $cc_basename in
           CC*)
 	    # SGI C++
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
 
 	    # Archives containing C++ object files must be created using
 	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
@@ -5935,9 +5848,9 @@ if test "$_lt_caught_CXX_error" != yes; then
           *)
 	    if test "$GXX" = yes; then
 	      if test "$with_gnu_ld" = no; then
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 	      else
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
 	      fi
 	    fi
 	    _LT_TAGVAR(link_all_deplibs, $1)=yes
@@ -5966,7 +5879,7 @@ if test "$_lt_caught_CXX_error" != yes; then
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
 
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
 	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
@@ -6003,26 +5916,26 @@ if test "$_lt_caught_CXX_error" != yes; then
           pgCC* | pgcpp*)
             # Portland Group C++ compiler
 	    case `$CC -V` in
-	    *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
+	    *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
 	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
 		rm -rf $tpldir~
 		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
-		compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+		compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
 	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
 		rm -rf $tpldir~
 		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
-		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
 		$RANLIB $oldlib'
 	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
 		rm -rf $tpldir~
 		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
 	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
 		rm -rf $tpldir~
 		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
 	      ;;
-	    *) # Version 6 and above use weak symbols
+	    *) # Version 6 will use weak symbols
 	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
 	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
 	      ;;
@@ -6030,7 +5943,7 @@ if test "$_lt_caught_CXX_error" != yes; then
 
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
 	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
             ;;
 	  cxx*)
 	    # Compaq C++
@@ -6049,9 +5962,9 @@ if test "$_lt_caught_CXX_error" != yes; then
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
 	    ;;
-	  xl* | mpixl* | bgxl*)
+	  xl*)
 	    # IBM XL 8.0 on PPC, with GNU ld
 	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
 	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
@@ -6071,13 +5984,13 @@ if test "$_lt_caught_CXX_error" != yes; then
 	      _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
 	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
 	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
 	      _LT_TAGVAR(compiler_needs_object, $1)=yes
 
 	      # Not sure whether something based on
 	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
 	      # would be better.
-	      output_verbose_link_cmd='func_echo_all'
+	      output_verbose_link_cmd='echo'
 
 	      # Archives containing C++ object files must be created using
 	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
@@ -6146,7 +6059,7 @@ if test "$_lt_caught_CXX_error" != yes; then
 	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
 	    _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
 	  fi
-	  output_verbose_link_cmd=func_echo_all
+	  output_verbose_link_cmd=echo
 	else
 	  _LT_TAGVAR(ld_shlibs, $1)=no
 	fi
@@ -6181,15 +6094,15 @@ if test "$_lt_caught_CXX_error" != yes; then
 	    case $host in
 	      osf3*)
 	        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
 	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
 		;;
 	      *)
 	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
 	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
 	          echo "-hidden">> $lib.exp~
-	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
+	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
 	          $RM $lib.exp'
 	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
 		;;
@@ -6205,17 +6118,17 @@ if test "$_lt_caught_CXX_error" != yes; then
 	    # explicitly linking system object files so we need to strip them
 	    # from the output so that they don't get included in the library
 	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
 	    ;;
 	  *)
 	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
 	      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
 	      case $host in
 	        osf3*)
-	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 		  ;;
 	        *)
-	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
 		  ;;
 	      esac
 
@@ -6225,7 +6138,7 @@ if test "$_lt_caught_CXX_error" != yes; then
 	      # Commands to make compiler produce verbose output that lists
 	      # what "hidden" libraries, object files and flags are used when
 	      # linking a shared library.
-	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
 
 	    else
 	      # FIXME: insert proper C++ library support
@@ -6261,7 +6174,7 @@ if test "$_lt_caught_CXX_error" != yes; then
 
       solaris*)
         case $cc_basename in
-          CC* | sunCC*)
+          CC*)
 	    # Sun C++ 4.2, 5.x and Centerline C++
             _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
 	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
@@ -6282,7 +6195,7 @@ if test "$_lt_caught_CXX_error" != yes; then
 	    esac
 	    _LT_TAGVAR(link_all_deplibs, $1)=yes
 
-	    output_verbose_link_cmd='func_echo_all'
+	    output_verbose_link_cmd='echo'
 
 	    # Archives containing C++ object files must be created using
 	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
@@ -6309,7 +6222,7 @@ if test "$_lt_caught_CXX_error" != yes; then
 	        # Commands to make compiler produce verbose output that lists
 	        # what "hidden" libraries, object files and flags are used when
 	        # linking a shared library.
-	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
 	      else
 	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
 	        # platform.
@@ -6320,7 +6233,7 @@ if test "$_lt_caught_CXX_error" != yes; then
 	        # Commands to make compiler produce verbose output that lists
 	        # what "hidden" libraries, object files and flags are used when
 	        # linking a shared library.
-	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
 	      fi
 
 	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
@@ -6374,10 +6287,6 @@ if test "$_lt_caught_CXX_error" != yes; then
           CC*)
 	    _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
-	      '"$_LT_TAGVAR(old_archive_cmds, $1)"
-	    _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
-	      '"$_LT_TAGVAR(reload_cmds, $1)"
 	    ;;
 	  *)
 	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
@@ -6624,7 +6533,7 @@ linux*)
 
 solaris*)
   case $cc_basename in
-  CC* | sunCC*)
+  CC*)
     # The more standards-conforming stlport4 library is
     # incompatible with the Cstd library. Avoid specifying
     # it if it's in CXXFLAGS. Ignore libCrun as
@@ -6668,16 +6577,32 @@ _LT_TAGDECL([], [compiler_lib_search_path], [1],
 ])# _LT_SYS_HIDDEN_LIBDEPS
 
 
+# _LT_PROG_F77
+# ------------
+# Since AC_PROG_F77 is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_F77],
+[
+pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
+AC_PROG_F77
+if test -z "$F77" || test "X$F77" = "Xno"; then
+  _lt_disable_F77=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_F77
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_F77], [])
+
+
 # _LT_LANG_F77_CONFIG([TAG])
 # --------------------------
 # Ensure that the configuration variables for a Fortran 77 compiler are
 # suitably defined.  These variables are subsequently used by _LT_CONFIG
 # to write the compiler configuration to `libtool'.
 m4_defun([_LT_LANG_F77_CONFIG],
-[AC_LANG_PUSH(Fortran 77)
-if test -z "$F77" || test "X$F77" = "Xno"; then
-  _lt_disable_F77=yes
-fi
+[AC_REQUIRE([_LT_PROG_F77])dnl
+AC_LANG_PUSH(Fortran 77)
 
 _LT_TAGVAR(archive_cmds_need_lc, $1)=no
 _LT_TAGVAR(allow_undefined_flag, $1)=
@@ -6696,8 +6621,6 @@ _LT_TAGVAR(module_cmds, $1)=
 _LT_TAGVAR(module_expsym_cmds, $1)=
 _LT_TAGVAR(link_all_deplibs, $1)=unknown
 _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
 _LT_TAGVAR(no_undefined_flag, $1)=
 _LT_TAGVAR(whole_archive_flag_spec, $1)=
 _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
@@ -6797,17 +6720,32 @@ AC_LANG_POP
 ])# _LT_LANG_F77_CONFIG
 
 
+# _LT_PROG_FC
+# -----------
+# Since AC_PROG_FC is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_FC],
+[
+pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
+AC_PROG_FC
+if test -z "$FC" || test "X$FC" = "Xno"; then
+  _lt_disable_FC=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_FC
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_FC], [])
+
+
 # _LT_LANG_FC_CONFIG([TAG])
 # -------------------------
 # Ensure that the configuration variables for a Fortran compiler are
 # suitably defined.  These variables are subsequently used by _LT_CONFIG
 # to write the compiler configuration to `libtool'.
 m4_defun([_LT_LANG_FC_CONFIG],
-[AC_LANG_PUSH(Fortran)
-
-if test -z "$FC" || test "X$FC" = "Xno"; then
-  _lt_disable_FC=yes
-fi
+[AC_REQUIRE([_LT_PROG_FC])dnl
+AC_LANG_PUSH(Fortran)
 
 _LT_TAGVAR(archive_cmds_need_lc, $1)=no
 _LT_TAGVAR(allow_undefined_flag, $1)=
@@ -6826,8 +6764,6 @@ _LT_TAGVAR(module_cmds, $1)=
 _LT_TAGVAR(module_expsym_cmds, $1)=
 _LT_TAGVAR(link_all_deplibs, $1)=unknown
 _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
 _LT_TAGVAR(no_undefined_flag, $1)=
 _LT_TAGVAR(whole_archive_flag_spec, $1)=
 _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
@@ -6973,8 +6909,6 @@ _LT_CC_BASENAME([$compiler])
 _LT_TAGVAR(archive_cmds_need_lc, $1)=no
 
 _LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
 
 ## CAVEAT EMPTOR:
 ## There is no encapsulation within the following macros, do not change
@@ -7342,7 +7276,7 @@ _LT_EOF
 func_dirname ()
 {
   # Extract subdirectory from the argument.
-  func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
   if test "X$func_dirname_result" = "X${1}"; then
     func_dirname_result="${3}"
   else
@@ -7353,7 +7287,7 @@ func_dirname ()
 # func_basename file
 func_basename ()
 {
-  func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
 }
 
 dnl func_dirname_and_basename
@@ -7369,8 +7303,10 @@ dnl so there is no need for it here.
 func_stripname ()
 {
   case ${2} in
-    .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
-    *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+    .*) func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+    *)  func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
   esac
 }
 
@@ -7381,20 +7317,20 @@ my_sed_long_arg='1s/^-[[^=]]*=//'
 # func_opt_split
 func_opt_split ()
 {
-  func_opt_split_opt=`$ECHO "${1}" | $SED "$my_sed_long_opt"`
-  func_opt_split_arg=`$ECHO "${1}" | $SED "$my_sed_long_arg"`
+  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
 }
 
 # func_lo2o object
 func_lo2o ()
 {
-  func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
 }
 
 # func_xform libobj-or-source
 func_xform ()
 {
-  func_xform_result=`$ECHO "${1}" | $SED 's/\.[[^.]]*$/.lo/'`
+  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
 }
 
 # func_arith arithmetic-term...
diff --git a/m4/ltoptions.m4 b/m4/ltoptions.m4
index 17cfd51..34151a3 100644
--- a/m4/ltoptions.m4
+++ b/m4/ltoptions.m4
@@ -1,14 +1,13 @@
 # Helper functions for option handling.                    -*- Autoconf -*-
 #
-#   Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
-#   Inc.
+#   Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
 #   Written by Gary V. Vaughan, 2004
 #
 # This file is free software; the Free Software Foundation gives
 # unlimited permission to copy and/or distribute it, with or without
 # modifications, as long as this notice is preserved.
 
-# serial 7 ltoptions.m4
+# serial 6 ltoptions.m4
 
 # This is to help aclocal find these macros, as it can't see m4_define.
 AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
@@ -126,7 +125,7 @@ LT_OPTION_DEFINE([LT_INIT], [win32-dll],
 [enable_win32_dll=yes
 
 case $host in
-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
   AC_CHECK_TOOL(AS, as, false)
   AC_CHECK_TOOL(DLLTOOL, dlltool, false)
   AC_CHECK_TOOL(OBJDUMP, objdump, false)
@@ -134,13 +133,13 @@ case $host in
 esac
 
 test -z "$AS" && AS=as
-_LT_DECL([], [AS],      [1], [Assembler program])dnl
+_LT_DECL([], [AS],      [0], [Assembler program])dnl
 
 test -z "$DLLTOOL" && DLLTOOL=dlltool
-_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
+_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
 
 test -z "$OBJDUMP" && OBJDUMP=objdump
-_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
+_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
 ])# win32-dll
 
 AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
diff --git a/m4/ltversion.m4 b/m4/ltversion.m4
index 93fc771..f3c5309 100644
--- a/m4/ltversion.m4
+++ b/m4/ltversion.m4
@@ -9,15 +9,15 @@
 
 # Generated from ltversion.in.
 
-# serial 3175 ltversion.m4
+# serial 3017 ltversion.m4
 # This file is part of GNU Libtool
 
-m4_define([LT_PACKAGE_VERSION], [2.2.10])
-m4_define([LT_PACKAGE_REVISION], [1.3175])
+m4_define([LT_PACKAGE_VERSION], [2.2.6b])
+m4_define([LT_PACKAGE_REVISION], [1.3017])
 
 AC_DEFUN([LTVERSION_VERSION],
-[macro_version='2.2.10'
-macro_revision='1.3175'
+[macro_version='2.2.6b'
+macro_revision='1.3017'
 _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
 _LT_DECL(, macro_revision, 0)
 ])
diff --git a/m4/lt~obsolete.m4 b/m4/lt~obsolete.m4
index c573da9..637bb20 100644
--- a/m4/lt~obsolete.m4
+++ b/m4/lt~obsolete.m4
@@ -1,13 +1,13 @@
 # lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
 #
-#   Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
+#   Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
 #   Written by Scott James Remnant, 2004.
 #
 # This file is free software; the Free Software Foundation gives
 # unlimited permission to copy and/or distribute it, with or without
 # modifications, as long as this notice is preserved.
 
-# serial 5 lt~obsolete.m4
+# serial 4 lt~obsolete.m4
 
 # These exist entirely to fool aclocal when bootstrapping libtool.
 #
@@ -77,6 +77,7 @@ m4_ifndef([AC_DISABLE_FAST_INSTALL],	[AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
 m4_ifndef([_LT_AC_LANG_CXX],		[AC_DEFUN([_LT_AC_LANG_CXX])])
 m4_ifndef([_LT_AC_LANG_F77],		[AC_DEFUN([_LT_AC_LANG_F77])])
 m4_ifndef([_LT_AC_LANG_GCJ],		[AC_DEFUN([_LT_AC_LANG_GCJ])])
+m4_ifndef([AC_LIBTOOL_RC],		[AC_DEFUN([AC_LIBTOOL_RC])])
 m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
 m4_ifndef([_LT_AC_LANG_C_CONFIG],	[AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
 m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
@@ -89,10 +90,3 @@ m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
 m4_ifndef([_LT_AC_LANG_RC_CONFIG],	[AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
 m4_ifndef([AC_LIBTOOL_CONFIG],		[AC_DEFUN([AC_LIBTOOL_CONFIG])])
 m4_ifndef([_LT_AC_FILE_LTDLL_C],	[AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
-m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS],	[AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
-m4_ifndef([_LT_AC_PROG_CXXCPP],		[AC_DEFUN([_LT_AC_PROG_CXXCPP])])
-m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS],	[AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
-m4_ifndef([_LT_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
-m4_ifndef([_LT_PROG_F77],		[AC_DEFUN([_LT_PROG_F77])])
-m4_ifndef([_LT_PROG_FC],		[AC_DEFUN([_LT_PROG_FC])])
-m4_ifndef([_LT_PROG_CXX],		[AC_DEFUN([_LT_PROG_CXX])])
diff --git a/plugins/cust1/Makefile.in b/plugins/cust1/Makefile.in
index cb830b3..f08a629 100644
--- a/plugins/cust1/Makefile.in
+++ b/plugins/cust1/Makefile.in
@@ -243,6 +243,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/cust1/cust1.c b/plugins/cust1/cust1.c
index 66bfdbf..e69de29 100644
--- a/plugins/cust1/cust1.c
+++ b/plugins/cust1/cust1.c
@@ -1,478 +0,0 @@
-/* cust1.c
- */
-#include "config.h"
-#include <stdio.h>
-#include <stdlib.h>
-#include <assert.h>
-#include <string.h>
-#include <errno.h>
-#include <unistd.h>
-#include <stdarg.h>
-#include <ctype.h>
-#include <netinet/in.h>
-#include <netdb.h>
-#include <sys/types.h>
-#include	<sys/socket.h>
-#include "rsyslog.h"
-#include "dirty.h"
-#include "cfsysline.h"
-#include "module-template.h"
-#include "unicode-helper.h"
-#include "net.h"
-#include "netstrm.h"
-#include "errmsg.h"
-#include "strmsrv.h"
-#include "srUtils.h"
-#include "msg.h"
-#include "datetime.h"
-#include "diis-gw.h"
-
-MODULE_TYPE_INPUT
-
-/* static data */
-DEF_IMOD_STATIC_DATA
-DEFobjCurrIf(strmsrv)
-DEFobjCurrIf(strms_sess)
-DEFobjCurrIf(net)
-DEFobjCurrIf(netstrm)
-DEFobjCurrIf(errmsg)
-DEFobjCurrIf(datetime)
-
-
-/* Module specific definitions */
-typedef enum {
-	DIIS_IN_HDR = 0,		/* reading header */
-	DIIS_IN_BODY = 1		/* reading message body */
-} diis_state_t;	/* states for our state machine */
-
-typedef struct {
-	diis_state_t state;
-	bmf_resp_data_t resp_data;	/* response data structure */
-	bmf_req_data_t req_data;	/* request data structure */
-	unsigned int iBuf;			/* buffer index during reception */
-	char *body_buf;			/* buffer for the message body */
-} diis_sess_t;
-
-
-/* Module static data */
-static strmsrv_t *pOurStrmsrv = NULL;  /* our STRM server(listener) */
-static permittedPeers_t *pPermPeersRoot = NULL;
-
-static int bKeepAlive = 1;		/* support keep-alive packets */
-
-/* config settings */
-static int iSTRMSessMax = 200; /* max number of sessions */
-static int iStrmDrvrMode = 0; /* mode for stream driver, driver-dependent (0 mostly means plain strm) */
-static uchar *pszStrmDrvrAuthMode = NULL; /* authentication mode to use */
-static uchar *pszInputName = NULL; /* value for inputname property, NULL is OK and handled by core engine */
-
-
-/* Called by strmsrv on acceptance of a new session. This allocates our
- * own session data.
- * rgerhards, 2009-06-02
- */
-static rsRetVal
-OnSessConstructFinalize(void *pUsr)
-{
-	diis_sess_t *pData;
-	DEFiRet;
-
-	assert(pUsr != NULL);
-	CHKmalloc(pData = calloc(1, sizeof(diis_sess_t)));
-	pData->state = DIIS_IN_HDR;
-	*((diis_sess_t**) pUsr) = pData;
-
-finalize_it:
-	RETiRet;
-}
-
-
-/* Called by strmsrv when a session is destructed. Must do cleanup.
- * rgerhards, 2009-06-02
- */
-static rsRetVal
-OnSessDestruct(void *pUsr)
-{
-	diis_sess_t *pData;
-	DEFiRet;
-
-	assert(pUsr != NULL);
-	pData = *((diis_sess_t**) pUsr);
-	free(pData);
-	*((diis_sess_t**) pUsr) = NULL;
-
-	RETiRet;
-}
-
-
-/* process a received request header. This is based on the contributed code,
- * which has only lightly be adopted to rsyslog design.
- */
-static rsRetVal
-processHdr(diis_sess_t *pData)
-{
-	uint32_t net_long;
-	unsigned char *resp_buf_ptr;
-	uchar *buf_ptr;
-	DEFiRet;
-	assert(pData != NULL);
-
-        /* Determine whether response header should have hostname field */
-        if((pData->req_data.raw_hdr[REQ_TYPE_FLAG_OFFSET] & REQ_HNAME_FLAG_MASK)
-	     == REQ_HNAME_FLAG_MASK)
-        {
-		buf_ptr = pData->resp_data.raw_hdr + RESP_HNAME_OFFSET;
-		sprintf((char*)buf_ptr, "test.hostname.domainname"); // TODO: What does this do???
-		pData->resp_data.host_used = TRUE;
-		pData->resp_data.raw_hdr[RESP_TYPE_FLAG_OFFSET] = RESP_HNAME_FLAG_MASK;
-	}
-
-	/* Extract the IID from the BMF header - some values used for testing */
-	buf_ptr = pData->req_data.raw_hdr + REQ_IID_OFFSET;
-	memcpy(&net_long, buf_ptr, sizeof(net_long));
-	pData->resp_data.resp_iid = ntohl(net_long);
-
-	buf_ptr = pData->req_data.raw_hdr + REQ_LEN_OFFSET;
-	memcpy(&net_long, buf_ptr, sizeof(net_long));
-	pData->req_data.length = ntohl(net_long);
-
-	/* Populate the response header/
-	 * Type flag is already set 
-	 * Use the request type code, IID, and length for normal response
-	 * OK to use length because we are returning the request message body */
-
-	buf_ptr = pData->req_data.raw_hdr + REQ_TYPE_CODE_OFFSET;
-	resp_buf_ptr = pData->resp_data.raw_hdr + RESP_TYPE_CODE_OFFSET;
-	memcpy(resp_buf_ptr, buf_ptr, RESP_TYPE_CODE_SIZE + RESP_IID_SIZE + RESP_LEN_SIZE);
-
-	/* Allocate a buffer to hold the message body */
-	CHKmalloc(pData->body_buf = malloc(pData->req_data.length));
-
-finalize_it:
-	RETiRet;
-}
-
-
-/* read in the DIIS header
- * When we enter this function, there is at least one more character
- * to be processed read for the header. Initiates header processing and
- * state switch when everything was read.
- */
-static rsRetVal
-doHdr(diis_sess_t *pData, uchar c)
-{
-	DEFiRet;
-	assert(pData != NULL);
-
-	((char*) (pData->req_data.raw_hdr))[pData->iBuf] = c;
-
-	if(++pData->iBuf == REQ_HDR_LEN) {
-		/* request header read, do state transition */
-		CHKiRet(processHdr(pData));
-		pData->iBuf = 0;
-		pData->state = DIIS_IN_BODY;
-		dbgprintf("diis message body length: %d\n", pData->req_data.length);
-	}
-
-finalize_it:
-	RETiRet;
-}
-
-
-/* process the body part of a message
- * This again mainly is the original code.
- */
-static rsRetVal
-processBody(strms_sess_t *pSess, diis_sess_t *pData)
-{
-	unsigned char *resp_buf_ptr;
-	uint32_t net_long;
-	int length;
-	int dummy;
-	ssize_t sendLen;
-	DEFiRet;
-	assert(pData != NULL);
-
-	dbgprintf("diis message body : '%s'\n", pData->body_buf);
-
-	/* Test client uses some specific iid values to request failure tests */
-	switch (pData->resp_data.resp_iid)
-	{
-	case 999999999:
-		/*****  Test Bad Response Type Code  *****/
-		dbgprintf("Test Bad Response Type Code");
-		resp_buf_ptr = pData->resp_data.raw_hdr + RESP_TYPE_CODE_OFFSET;
-		*resp_buf_ptr =  100;
-		break;
-	case 999999998:
-		/*****  Test too large response length  *****/
-		dbgprintf( "Test too large response length");
-		resp_buf_ptr = pData->resp_data.raw_hdr + RESP_LEN_OFFSET;
-		length = b2c_rsp_LIMIT + 1;
-		net_long = htonl(length);
-		memcpy(resp_buf_ptr, &net_long, RESP_LEN_SIZE);
-		break;
-	case 999999997:
-		/*****  Test response DIIS Message Header - length mismatch  *****/
-		dbgprintf( "Test response DIIS Message Header - length mismatch");
-		resp_buf_ptr = pData->resp_data.raw_hdr + RESP_LEN_OFFSET;
-		length = pData->req_data.length - 1;
-		net_long = htonl(length);
-		memcpy(resp_buf_ptr, &net_long, RESP_LEN_SIZE);
-		break;
-	case 999999996:
-		/*****  Test response DIIS Message Header - IID mismatch  *****/
-		dbgprintf( "Test response DIIS Message Header - IID mismatch");
-		resp_buf_ptr = (unsigned char*) pData->body_buf + DIIS_MSG_HDR_TAG1_LEN;
-		strncpy((char*) resp_buf_ptr, "00000000", 8);
-		break;
-	case 999999995:
-		/*****  Test response BMF Header - IID mismatch  *****/
-		dbgprintf( "Test response BMF Header - IID mismatch");
-		resp_buf_ptr = pData->resp_data.raw_hdr + RESP_IID_OFFSET;
-		dummy = 1;
-		net_long = htonl(dummy);
-		memcpy(resp_buf_ptr, &net_long, RESP_IID_SIZE);
-		break;
-	default:
-		break;
-	}
-
-	// ????????????????????????????????????????????????????????????????????????????????
-	/* TODO
-	 * I think something needs to be changed here. This looks much like echo server
-	 * code, not the actual code. So what do we need to reply?
-	 * Also, I assume that we can now submit the message to the rsyslog core at this
-	 * point.
-	 */
-	// ????????????????????????????????????????????????????????????????????????????????
-
-
-	if (pData->resp_data.host_used) {
-		sendLen = RESP_HDR_LEN;
-	} else {
-		sendLen = RESP_HDR_1ST_READ;
-	}
-
-	CHKiRet(netstrm.Send(pSess->pStrm, pData->resp_data.raw_hdr, &sendLen));
-	sendLen = pData->req_data.length;
-	CHKiRet(netstrm.Send(pSess->pStrm, (uchar*)pData->body_buf, &sendLen));
-	//bytes_written = net_write(0, body_buf, bytes_read, 0);
-
-finalize_it:
-	RETiRet;
-}
-
-
-/* read in the DIIS body
- * When we enter this function, there is at least one more character
- * to be processed read for the header. Initiates body processing and
- * state switch when everything was read.
- */
-static rsRetVal
-doBody(strms_sess_t *pSess, diis_sess_t *pData, uchar c)
-{
-	DEFiRet;
-	assert(pData != NULL);
-
-	pData->body_buf[pData->iBuf] = c;
-
-	if(++pData->iBuf == pData->req_data.length) {
-		/* request header read, do state transition */
-		/* we do not use CHKiRet() below, because we MUST do the cleanup
-		 * in any case!
-		 */
-		iRet = processBody(pSess, pData);
-		/* cleanup */
-		pData->iBuf = 0;
-		pData->state = DIIS_IN_HDR;
-		free(pData->body_buf);
-		pData->body_buf = NULL;
-	}
-
-	RETiRet;
-}
-
-
-/* Function to handle received characters.
- * rgerhards, 2009-06-02
- */
-static rsRetVal
-OnCharRcvd(strms_sess_t *pSess, uchar c)
-{
-	diis_sess_t *pData;
-	DEFiRet;
-
-	assert(pSess != NULL);
-	pData = strms_sess.GetUsrP(pSess);
-	assert(pData != NULL);
-
-	switch(pData->state) {
-		case DIIS_IN_HDR:
-			CHKiRet(doHdr(pData, c));
-			break;
-		case DIIS_IN_BODY:
-			CHKiRet(doBody(pSess, pData, c));
-			break;
-		default:dbgprintf("program error: invalid diis state %d\n",
-				  (int) pData->state);
-			assert(0);
-			break;
-	}
-
-finalize_it:
-	RETiRet;
-}
-
-
-/* set permitted peer -- rgerhards, 2008-05-19
- */
-static rsRetVal
-setPermittedPeer(void __attribute__((unused)) *pVal, uchar *pszID)
-{
-	DEFiRet;
-	CHKiRet(net.AddPermittedPeer(&pPermPeersRoot, pszID));
-	free(pszID); /* no longer needed, but we need to free as of interface def */
-finalize_it:
-	RETiRet;
-}
-
-
-static rsRetVal addSTRMListener(void __attribute__((unused)) *pVal, uchar *pNewVal)
-{
-	DEFiRet;
-
-	if(pOurStrmsrv == NULL) {
-		CHKiRet(strmsrv.Construct(&pOurStrmsrv));
-		CHKiRet(strmsrv.SetSessMax(pOurStrmsrv, iSTRMSessMax));
-		CHKiRet(strmsrv.SetDrvrMode(pOurStrmsrv, iStrmDrvrMode));
-		CHKiRet(strmsrv.SetOnCharRcvd(pOurStrmsrv, OnCharRcvd));
-		CHKiRet(strmsrv.SetKeepAlive(pOurStrmsrv, bKeepAlive));
-		CHKiRet(strmsrv.SetCBOnSessConstructFinalize(pOurStrmsrv, OnSessConstructFinalize));
-		CHKiRet(strmsrv.SetCBOnSessDestruct(pOurStrmsrv, OnSessDestruct));
-		/* now set optional params, but only if they were actually configured */
-		if(pszStrmDrvrAuthMode != NULL) {
-			CHKiRet(strmsrv.SetDrvrAuthMode(pOurStrmsrv, pszStrmDrvrAuthMode));
-		}
-		if(pPermPeersRoot != NULL) {
-			CHKiRet(strmsrv.SetDrvrPermPeers(pOurStrmsrv, pPermPeersRoot));
-		}
-	}
-
-	/* initialized, now add socket */
-	CHKiRet(strmsrv.SetInputName(pOurStrmsrv, pszInputName == NULL ?
-						UCHAR_CONSTANT("diis") : pszInputName));
-	strmsrv.configureSTRMListen(pOurStrmsrv, pNewVal);
-
-finalize_it:
-	if(iRet != RS_RET_OK) {
-		errmsg.LogError(0, NO_ERRCODE, "error %d trying to add diis listener", iRet);
-		if(pOurStrmsrv != NULL)
-			strmsrv.Destruct(&pOurStrmsrv);
-	}
-	RETiRet;
-}
-
-/* This function is called to gather input.
- */
-BEGINrunInput
-CODESTARTrunInput
-	CHKiRet(strmsrv.ConstructFinalize(pOurStrmsrv));
-	iRet = strmsrv.Run(pOurStrmsrv);
-finalize_it:
-ENDrunInput
-
-
-/* initialize and return if will run or not */
-BEGINwillRun
-CODESTARTwillRun
-	/* first apply some config settings */
-	if(pOurStrmsrv == NULL)
-		ABORT_FINALIZE(RS_RET_NO_RUN);
-finalize_it:
-ENDwillRun
-
-
-BEGINafterRun
-CODESTARTafterRun
-	/* do cleanup here */
-ENDafterRun
-
-
-BEGINmodExit
-CODESTARTmodExit
-	if(pOurStrmsrv != NULL)
-		iRet = strmsrv.Destruct(&pOurStrmsrv);
-
-	if(pPermPeersRoot != NULL) {
-		net.DestructPermittedPeers(&pPermPeersRoot);
-	}
-
-	/* release objects we used */
-	objRelease(net, LM_NET_FILENAME);
-	objRelease(netstrm, LM_NETSTRMS_FILENAME);
-	objRelease(strms_sess, LM_STRMSRV_FILENAME);
-	objRelease(strmsrv, LM_STRMSRV_FILENAME);
-	objRelease(errmsg, CORE_COMPONENT);
-	objRelease(datetime, CORE_COMPONENT);
-ENDmodExit
-
-
-static rsRetVal
-resetConfigVariables(uchar __attribute__((unused)) *pp, void __attribute__((unused)) *pVal)
-{
-	iSTRMSessMax = 200;
-	iStrmDrvrMode = 0;
-	bKeepAlive = 1;
-	free(pszInputName);
-	pszInputName = NULL;
-	if(pszStrmDrvrAuthMode != NULL) {
-		free(pszStrmDrvrAuthMode);
-		pszStrmDrvrAuthMode = NULL;
-	}
-	return RS_RET_OK;
-}
-
-
-
-BEGINqueryEtryPt
-CODESTARTqueryEtryPt
-CODEqueryEtryPt_STD_IMOD_QUERIES
-ENDqueryEtryPt
-
-
-BEGINmodInit()
-CODESTARTmodInit
-	*ipIFVersProvided = CURR_MOD_IF_VERSION; /* we only support the current interface specification */
-CODEmodInit_QueryRegCFSLineHdlr
-	pOurStrmsrv = NULL;
-	/* request objects we use */
-	CHKiRet(objUse(net, LM_NET_FILENAME));
-	CHKiRet(objUse(netstrm, LM_NETSTRMS_FILENAME));
-	CHKiRet(objUse(strms_sess, LM_STRMSRV_FILENAME));
-	CHKiRet(objUse(strmsrv, LM_STRMSRV_FILENAME));
-	CHKiRet(objUse(errmsg, CORE_COMPONENT));
-	CHKiRet(objUse(datetime, CORE_COMPONENT));
-
-	/* register config file handlers */
-	CHKiRet(omsdRegCFSLineHdlr(UCHAR_CONSTANT("diisserverkeepalive"), 0, eCmdHdlrBinary,
-				   NULL, &bKeepAlive, STD_LOADABLE_MODULE_ID, eConfObjGlobal));
-	CHKiRet(omsdRegCFSLineHdlr(UCHAR_CONSTANT("diisserverrun"), 0, eCmdHdlrGetWord,
-				   addSTRMListener, NULL, STD_LOADABLE_MODULE_ID, eConfObjGlobal));
-	CHKiRet(omsdRegCFSLineHdlr(UCHAR_CONSTANT("diismaxsessions"), 0, eCmdHdlrInt,
-				   NULL, &iSTRMSessMax, STD_LOADABLE_MODULE_ID, eConfObjGlobal));
-	CHKiRet(omsdRegCFSLineHdlr(UCHAR_CONSTANT("diisserverstreamdrivermode"), 0,
-				   eCmdHdlrInt, NULL, &iStrmDrvrMode, STD_LOADABLE_MODULE_ID, eConfObjGlobal));
-	CHKiRet(omsdRegCFSLineHdlr(UCHAR_CONSTANT("diisserverstreamdriverauthmode"), 0,
-				   eCmdHdlrGetWord, NULL, &pszStrmDrvrAuthMode, STD_LOADABLE_MODULE_ID, eConfObjGlobal));
-	CHKiRet(omsdRegCFSLineHdlr(UCHAR_CONSTANT("diisserverstreamdriverpermittedpeer"), 0,
-				   eCmdHdlrGetWord, setPermittedPeer, NULL, STD_LOADABLE_MODULE_ID, eConfObjGlobal));
-	CHKiRet(omsdRegCFSLineHdlr(UCHAR_CONSTANT("diisserverinputname"), 0,
-				   eCmdHdlrGetWord, NULL, &pszInputName, STD_LOADABLE_MODULE_ID, eConfObjGlobal));
-	CHKiRet(omsdRegCFSLineHdlr(UCHAR_CONSTANT("resetconfigvariables"), 1, eCmdHdlrCustomHandler,
-		resetConfigVariables, NULL, STD_LOADABLE_MODULE_ID, eConfObjGlobal));
-ENDmodInit
-
-
-/* vim:set ai:
- */
diff --git a/plugins/im3195/Makefile.in b/plugins/im3195/Makefile.in
index 16fa3eb..f763d66 100644
--- a/plugins/im3195/Makefile.in
+++ b/plugins/im3195/Makefile.in
@@ -244,6 +244,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/imdiag/Makefile.in b/plugins/imdiag/Makefile.in
index 4d5c9f6..5576aac 100644
--- a/plugins/imdiag/Makefile.in
+++ b/plugins/imdiag/Makefile.in
@@ -243,6 +243,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/imfile/Makefile.in b/plugins/imfile/Makefile.in
index 6c29df4..9a6436b 100644
--- a/plugins/imfile/Makefile.in
+++ b/plugins/imfile/Makefile.in
@@ -243,6 +243,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/imgssapi/Makefile.in b/plugins/imgssapi/Makefile.in
index 36f1c98..09c049d 100644
--- a/plugins/imgssapi/Makefile.in
+++ b/plugins/imgssapi/Makefile.in
@@ -244,6 +244,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/imklog/Makefile.in b/plugins/imklog/Makefile.in
index f4a33bf..d6d3981 100644
--- a/plugins/imklog/Makefile.in
+++ b/plugins/imklog/Makefile.in
@@ -254,6 +254,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/immark/Makefile.in b/plugins/immark/Makefile.in
index 400e8d6..db38b64 100644
--- a/plugins/immark/Makefile.in
+++ b/plugins/immark/Makefile.in
@@ -243,6 +243,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/impstats/Makefile.in b/plugins/impstats/Makefile.in
index d31cdbf..cb46d10 100644
--- a/plugins/impstats/Makefile.in
+++ b/plugins/impstats/Makefile.in
@@ -243,6 +243,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/imptcp/Makefile.in b/plugins/imptcp/Makefile.in
index 629a622..2e6e7cf 100644
--- a/plugins/imptcp/Makefile.in
+++ b/plugins/imptcp/Makefile.in
@@ -243,6 +243,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/imrelp/Makefile.in b/plugins/imrelp/Makefile.in
index 05ca566..037fc33 100644
--- a/plugins/imrelp/Makefile.in
+++ b/plugins/imrelp/Makefile.in
@@ -244,6 +244,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/imsolaris/Makefile.in b/plugins/imsolaris/Makefile.in
index 9990a46..b734a20 100644
--- a/plugins/imsolaris/Makefile.in
+++ b/plugins/imsolaris/Makefile.in
@@ -244,6 +244,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/imtcp/Makefile.in b/plugins/imtcp/Makefile.in
index 394183e..ec682f2 100644
--- a/plugins/imtcp/Makefile.in
+++ b/plugins/imtcp/Makefile.in
@@ -243,6 +243,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/imtemplate/Makefile.in b/plugins/imtemplate/Makefile.in
index 551cf7c..c0fd339 100644
--- a/plugins/imtemplate/Makefile.in
+++ b/plugins/imtemplate/Makefile.in
@@ -243,6 +243,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/imudp/Makefile.in b/plugins/imudp/Makefile.in
index 75fffed..45488e9 100644
--- a/plugins/imudp/Makefile.in
+++ b/plugins/imudp/Makefile.in
@@ -244,6 +244,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/imuxsock/Makefile.in b/plugins/imuxsock/Makefile.in
index b9a6617..f8721fe 100644
--- a/plugins/imuxsock/Makefile.in
+++ b/plugins/imuxsock/Makefile.in
@@ -244,6 +244,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/mmsnmptrapd/Makefile.in b/plugins/mmsnmptrapd/Makefile.in
index 45e633e..5ccdf9b 100644
--- a/plugins/mmsnmptrapd/Makefile.in
+++ b/plugins/mmsnmptrapd/Makefile.in
@@ -244,6 +244,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/omdbalerting/Makefile.in b/plugins/omdbalerting/Makefile.in
index a7b2899..eee9130 100644
--- a/plugins/omdbalerting/Makefile.in
+++ b/plugins/omdbalerting/Makefile.in
@@ -244,6 +244,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/omgssapi/Makefile.in b/plugins/omgssapi/Makefile.in
index 33fce58..20dd949 100644
--- a/plugins/omgssapi/Makefile.in
+++ b/plugins/omgssapi/Makefile.in
@@ -244,6 +244,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/omhdfs/Makefile.in b/plugins/omhdfs/Makefile.in
index 5221f0e..2a45241 100644
--- a/plugins/omhdfs/Makefile.in
+++ b/plugins/omhdfs/Makefile.in
@@ -244,6 +244,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/omlibdbi/Makefile.in b/plugins/omlibdbi/Makefile.in
index 632870c..3296820 100644
--- a/plugins/omlibdbi/Makefile.in
+++ b/plugins/omlibdbi/Makefile.in
@@ -244,6 +244,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/ommail/Makefile.in b/plugins/ommail/Makefile.in
index 6cf57bc..61e403c 100644
--- a/plugins/ommail/Makefile.in
+++ b/plugins/ommail/Makefile.in
@@ -243,6 +243,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/ommysql/Makefile.in b/plugins/ommysql/Makefile.in
index 1ce5447..a94d806 100644
--- a/plugins/ommysql/Makefile.in
+++ b/plugins/ommysql/Makefile.in
@@ -244,6 +244,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/omoracle/Makefile.in b/plugins/omoracle/Makefile.in
index a8ffec3..4ca9009 100644
--- a/plugins/omoracle/Makefile.in
+++ b/plugins/omoracle/Makefile.in
@@ -244,6 +244,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/ompgsql/Makefile.in b/plugins/ompgsql/Makefile.in
index 045b6d3..d83da90 100644
--- a/plugins/ompgsql/Makefile.in
+++ b/plugins/ompgsql/Makefile.in
@@ -244,6 +244,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/omprog/Makefile.in b/plugins/omprog/Makefile.in
index 692890b..e65390f 100644
--- a/plugins/omprog/Makefile.in
+++ b/plugins/omprog/Makefile.in
@@ -243,6 +243,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/omrelp/Makefile.in b/plugins/omrelp/Makefile.in
index abf5e55..32ac4ce 100644
--- a/plugins/omrelp/Makefile.in
+++ b/plugins/omrelp/Makefile.in
@@ -244,6 +244,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/omruleset/Makefile.in b/plugins/omruleset/Makefile.in
index d47013c..050a6b0 100644
--- a/plugins/omruleset/Makefile.in
+++ b/plugins/omruleset/Makefile.in
@@ -243,6 +243,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/omsnmp/Makefile.in b/plugins/omsnmp/Makefile.in
index d58c819..27d0d77 100644
--- a/plugins/omsnmp/Makefile.in
+++ b/plugins/omsnmp/Makefile.in
@@ -244,6 +244,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/omstdout/Makefile.in b/plugins/omstdout/Makefile.in
index f28be68..08e7a38 100644
--- a/plugins/omstdout/Makefile.in
+++ b/plugins/omstdout/Makefile.in
@@ -243,6 +243,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/omtemplate/Makefile.in b/plugins/omtemplate/Makefile.in
index d3dc71b..358cd94 100644
--- a/plugins/omtemplate/Makefile.in
+++ b/plugins/omtemplate/Makefile.in
@@ -243,6 +243,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/omtesting/Makefile.in b/plugins/omtesting/Makefile.in
index f7e9690..c80a291 100644
--- a/plugins/omtesting/Makefile.in
+++ b/plugins/omtesting/Makefile.in
@@ -243,6 +243,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/omudpspoof/Makefile.in b/plugins/omudpspoof/Makefile.in
index a21ef78..9682f09 100644
--- a/plugins/omudpspoof/Makefile.in
+++ b/plugins/omudpspoof/Makefile.in
@@ -244,6 +244,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/omuxsock/Makefile.in b/plugins/omuxsock/Makefile.in
index b30b326..516f70a 100644
--- a/plugins/omuxsock/Makefile.in
+++ b/plugins/omuxsock/Makefile.in
@@ -243,6 +243,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/pmaixforwardedfrom/Makefile.in b/plugins/pmaixforwardedfrom/Makefile.in
index e9a122a..3f1b800 100644
--- a/plugins/pmaixforwardedfrom/Makefile.in
+++ b/plugins/pmaixforwardedfrom/Makefile.in
@@ -245,6 +245,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/pmaixforwardedfrom/pmaixforwardedfrom.c b/plugins/pmaixforwardedfrom/pmaixforwardedfrom.c
index fa4a908..fe3e85f 100644
--- a/plugins/pmaixforwardedfrom/pmaixforwardedfrom.c
+++ b/plugins/pmaixforwardedfrom/pmaixforwardedfrom.c
@@ -1,6 +1,6 @@
 /* pmaixforwardedfrom.c
  *
- * this detects logs sent by Cisco devices that mangle their syslog output when you tell them to log by name by adding ' :' between the name and the %XXX-X-XXXXXXX: tag
+ * this cleans up messages forwarded from AIX
  * 
  * instead of actually parsing the message, this modifies the message and then falls through to allow a later parser to handle the now modified message
  *
diff --git a/plugins/pmcisconames/Makefile.in b/plugins/pmcisconames/Makefile.in
index bc42cb9..61bbc78 100644
--- a/plugins/pmcisconames/Makefile.in
+++ b/plugins/pmcisconames/Makefile.in
@@ -244,6 +244,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/pmlastmsg/Makefile.in b/plugins/pmlastmsg/Makefile.in
index e1d318b..1c76715 100644
--- a/plugins/pmlastmsg/Makefile.in
+++ b/plugins/pmlastmsg/Makefile.in
@@ -243,6 +243,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/pmrfc3164sd/Makefile.in b/plugins/pmrfc3164sd/Makefile.in
index aab7281..3fcad17 100644
--- a/plugins/pmrfc3164sd/Makefile.in
+++ b/plugins/pmrfc3164sd/Makefile.in
@@ -244,6 +244,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/pmsnare/Makefile.in b/plugins/pmsnare/Makefile.in
index 8d5364a..c288aac 100644
--- a/plugins/pmsnare/Makefile.in
+++ b/plugins/pmsnare/Makefile.in
@@ -243,6 +243,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/plugins/sm_cust_bindcdr/Makefile.in b/plugins/sm_cust_bindcdr/Makefile.in
index 909a4a7..9a479ec 100644
--- a/plugins/sm_cust_bindcdr/Makefile.in
+++ b/plugins/sm_cust_bindcdr/Makefile.in
@@ -244,6 +244,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/runtime/Makefile.in b/runtime/Makefile.in
index c74edfc..aa5af5e 100644
--- a/runtime/Makefile.in
+++ b/runtime/Makefile.in
@@ -369,6 +369,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/runtime/msg.c b/runtime/msg.c
index d1e67aa..cc7b463 100644
--- a/runtime/msg.c
+++ b/runtime/msg.c
@@ -1629,14 +1629,21 @@ finalize_it:
 }
 
 
-/* rgerhards, 2005-11-24
+/* al, 2011-07-26: LockMsg to avoid race conditions
  */
 static inline char *getMSGID(msg_t *pM)
 {
-	return (pM->pCSMSGID == NULL) ? "-" : (char*) rsCStrGetSzStrNoNULL(pM->pCSMSGID);
+	if (pM->pCSMSGID == NULL) {
+		return "-"; 
+	}
+	else {
+		MsgLock(pM);
+		char* pszreturn = (char*) rsCStrGetSzStrNoNULL(pM->pCSMSGID);
+		MsgUnlock(pM);
+		return pszreturn; 
+	}
 }
 
-
 /* rgerhards 2009-06-12: set associated ruleset
  */
 void MsgSetRuleset(msg_t *pMsg, ruleset_t *pRuleset)
@@ -2868,6 +2875,7 @@ uchar *MsgGetProp(msg_t *pMsg, struct templateEntry *pTpe,
 		}
 	}
 
+dbgprintf("prop repl 4, pRes='%s', len %d\n", pRes, bufLen);
 	/* Take care of spurious characters to make the property safe
 	 * for a path definition
 	 */
@@ -2945,7 +2953,13 @@ uchar *MsgGetProp(msg_t *pMsg, struct templateEntry *pTpe,
 		}
 		
 		/* check for "." and ".." (note the parenthesis in the if condition!) */
-		if((*pRes == '.') && (*(pRes + 1) == '\0' || (*(pRes + 1) == '.' && *(pRes + 2) == '\0'))) {
+		if(*pRes == '\0') {
+			if(*pbMustBeFreed == 1)
+				free(pRes);
+			pRes = UCHAR_CONSTANT("_");
+			bufLen = 1;
+			*pbMustBeFreed = 0;
+		} else if((*pRes == '.') && (*(pRes + 1) == '\0' || (*(pRes + 1) == '.' && *(pRes + 2) == '\0'))) {
 			uchar *pTmp = pRes;
 
 			if(*(pRes + 1) == '\0')
@@ -2955,12 +2969,6 @@ uchar *MsgGetProp(msg_t *pMsg, struct templateEntry *pTpe,
 			if(*pbMustBeFreed == 1)
 				free(pTmp);
 			*pbMustBeFreed = 0;
-		} else if(*pRes == '\0') {
-			if(*pbMustBeFreed == 1)
-				free(pRes);
-			pRes = UCHAR_CONSTANT("_");
-			bufLen = 1;
-			*pbMustBeFreed = 0;
 		}
 	}
 
@@ -3032,6 +3040,7 @@ uchar *MsgGetProp(msg_t *pMsg, struct templateEntry *pTpe,
 		bufLen = ustrlen(pRes);
 	*pPropLen = bufLen;
 
+dbgprintf("end prop repl, pRes='%s', len %d\n", pRes, bufLen);
 	ENDfunc
 	return(pRes);
 }
diff --git a/runtime/net.c b/runtime/net.c
index 789790f..4781739 100644
--- a/runtime/net.c
+++ b/runtime/net.c
@@ -722,7 +722,7 @@ static rsRetVal AddAllowedSender(struct AllowedSenders **ppRoot, struct AllowedS
 						SIN(allowIP.addr.NetAddr)->sin_port   = 0;
 						memcpy(&(SIN(allowIP.addr.NetAddr)->sin_addr.s_addr),
 							&(SIN6(res->ai_addr)->sin6_addr.s6_addr32[3]),
-							sizeof (struct sockaddr_in));
+							sizeof (in_addr_t));
 
 						if((iRet = AddAllowedSenderEntry(ppRoot, ppLast, &allowIP,
 								iSignificantBits))
diff --git a/tests/INSTALL b/tests/INSTALL
deleted file mode 100644
index e69de29..0000000
--- a/tests/INSTALL
+++ /dev/null
diff --git a/tests/Makefile.in b/tests/Makefile.in
index 9acbda9..a667199 100644
--- a/tests/Makefile.in
+++ b/tests/Makefile.in
@@ -159,8 +159,7 @@ host_triplet = @host@
 @ENABLE_IMFILE_TRUE@@ENABLE_TESTBENCH_TRUE@am__append_12 = imfile-basic.sh
 @ENABLE_IMFILE_TRUE@@ENABLE_TESTBENCH_TRUE@@HAVE_VALGRIND_TRUE@am__append_13 = imfile-basic-vg.sh
 subdir = tests
-DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	INSTALL
+DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/atomic_operations.m4 \
 	$(top_srcdir)/m4/atomic_operations_64bit.m4 \
@@ -404,6 +403,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/tools/Makefile.in b/tools/Makefile.in
index b4532e4..29a5bda 100644
--- a/tools/Makefile.in
+++ b/tools/Makefile.in
@@ -277,6 +277,7 @@ libdir = @libdir@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moddirs = @moddirs@
diff --git a/tools/rsyslog.conf.5 b/tools/rsyslog.conf.5
index e17da97..6ce3c0e 100644
--- a/tools/rsyslog.conf.5
+++ b/tools/rsyslog.conf.5
@@ -272,14 +272,16 @@ Please note that rsyslogd offers a variety of options in regarding to remote
 forwarding. For full details, please see the html documentation.
 
 .SS List of users
-Usually critical messages are also directed to ``root'' on that machine. You can specify a list 
-of users that shall get the message by simply writing the login. You may specify more than one 
-user by separating them with commas (','). If they're logged in they get the message. Don't 
-think a mail would be sent, that might be too late.
+Usually critical messages are also directed to ``root'' on that machine. You
+can specify a list 
+of users that shall get the message by simply writing ":omusrmsg:" followed
+by the login name. You may specify more than one 
+user by separating them with commas (','). If they're logged in they
+get the message (for example: ":omusrmsg:root,user1,user2").
 
 .SS Everyone logged on
 Emergency messages often go to all users currently online to notify them that something strange 
-is happening with the system. To specify this wall(1)-feature use an asterisk ('*').
+is happening with the system. To specify this wall(1)-feature use an ":omusrmsg:*".
 
 .SS Database table
 This allows logging of the message to a database table.
@@ -558,10 +560,10 @@ that space.
 
 Keep in mind that $outchannel just defines a channel with "name". It does not activate it. 
 To do so, you must use a selector line (see below). That selector line includes the channel 
-name plus an $ sign in front of it. A sample might be:
+name plus ":omfile:$" in front of it. A sample might be:
 .sp
 .RS
-*.* $mychannel
+*.* :omfile:$mychannel
 .RE
 
 .SH PROPERTY REPLACER
diff --git a/ylwrap b/ylwrap
deleted file mode 100755
index 84d5634..0000000
--- a/ylwrap
+++ /dev/null
@@ -1,222 +0,0 @@
-#! /bin/sh
-# ylwrap - wrapper for lex/yacc invocations.
-
-scriptversion=2009-04-28.21; # UTC
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2001, 2002, 2003, 2004, 2005,
-# 2007, 2009 Free Software Foundation, Inc.
-#
-# Written by Tom Tromey <tromey@cygnus.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# This file is maintained in Automake, please report
-# bugs to <bug-automake@gnu.org> or send patches to
-# <automake-patches@gnu.org>.
-
-case "$1" in
-  '')
-    echo "$0: No files given.  Try \`$0 --help' for more information." 1>&2
-    exit 1
-    ;;
-  --basedir)
-    basedir=$2
-    shift 2
-    ;;
-  -h|--h*)
-    cat <<\EOF
-Usage: ylwrap [--help|--version] INPUT [OUTPUT DESIRED]... -- PROGRAM [ARGS]...
-
-Wrapper for lex/yacc invocations, renaming files as desired.
-
-  INPUT is the input file
-  OUTPUT is one file PROG generates
-  DESIRED is the file we actually want instead of OUTPUT
-  PROGRAM is program to run
-  ARGS are passed to PROG
-
-Any number of OUTPUT,DESIRED pairs may be used.
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
-    exit $?
-    ;;
-  -v|--v*)
-    echo "ylwrap $scriptversion"
-    exit $?
-    ;;
-esac
-
-
-# The input.
-input="$1"
-shift
-case "$input" in
-  [\\/]* | ?:[\\/]*)
-    # Absolute path; do nothing.
-    ;;
-  *)
-    # Relative path.  Make it absolute.
-    input="`pwd`/$input"
-    ;;
-esac
-
-pairlist=
-while test "$#" -ne 0; do
-  if test "$1" = "--"; then
-    shift
-    break
-  fi
-  pairlist="$pairlist $1"
-  shift
-done
-
-# The program to run.
-prog="$1"
-shift
-# Make any relative path in $prog absolute.
-case "$prog" in
-  [\\/]* | ?:[\\/]*) ;;
-  *[\\/]*) prog="`pwd`/$prog" ;;
-esac
-
-# FIXME: add hostname here for parallel makes that run commands on
-# other machines.  But that might take us over the 14-char limit.
-dirname=ylwrap$$
-trap "cd '`pwd`'; rm -rf $dirname > /dev/null 2>&1" 1 2 3 15
-mkdir $dirname || exit 1
-
-cd $dirname
-
-case $# in
-  0) "$prog" "$input" ;;
-  *) "$prog" "$@" "$input" ;;
-esac
-ret=$?
-
-if test $ret -eq 0; then
-  set X $pairlist
-  shift
-  first=yes
-  # Since DOS filename conventions don't allow two dots,
-  # the DOS version of Bison writes out y_tab.c instead of y.tab.c
-  # and y_tab.h instead of y.tab.h. Test to see if this is the case.
-  y_tab_nodot="no"
-  if test -f y_tab.c || test -f y_tab.h; then
-    y_tab_nodot="yes"
-  fi
-
-  # The directory holding the input.
-  input_dir=`echo "$input" | sed -e 's,\([\\/]\)[^\\/]*$,\1,'`
-  # Quote $INPUT_DIR so we can use it in a regexp.
-  # FIXME: really we should care about more than `.' and `\'.
-  input_rx=`echo "$input_dir" | sed 's,\\\\,\\\\\\\\,g;s,\\.,\\\\.,g'`
-
-  while test "$#" -ne 0; do
-    from="$1"
-    # Handle y_tab.c and y_tab.h output by DOS
-    if test $y_tab_nodot = "yes"; then
-      if test $from = "y.tab.c"; then
-    	from="y_tab.c"
-      else
-    	if test $from = "y.tab.h"; then
-    	  from="y_tab.h"
-    	fi
-      fi
-    fi
-    if test -f "$from"; then
-      # If $2 is an absolute path name, then just use that,
-      # otherwise prepend `../'.
-      case "$2" in
-    	[\\/]* | ?:[\\/]*) target="$2";;
-    	*) target="../$2";;
-      esac
-
-      # We do not want to overwrite a header file if it hasn't
-      # changed.  This avoid useless recompilations.  However the
-      # parser itself (the first file) should always be updated,
-      # because it is the destination of the .y.c rule in the
-      # Makefile.  Divert the output of all other files to a temporary
-      # file so we can compare them to existing versions.
-      if test $first = no; then
-	realtarget="$target"
-	target="tmp-`echo $target | sed s/.*[\\/]//g`"
-      fi
-      # Edit out `#line' or `#' directives.
-      #
-      # We don't want the resulting debug information to point at
-      # an absolute srcdir; it is better for it to just mention the
-      # .y file with no path.
-      #
-      # We want to use the real output file name, not yy.lex.c for
-      # instance.
-      #
-      # We want the include guards to be adjusted too.
-      FROM=`echo "$from" | sed \
-            -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\
-            -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`
-      TARGET=`echo "$2" | sed \
-            -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'\
-            -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`
-
-      sed -e "/^#/!b" -e "s,$input_rx,," -e "s,$from,$2," \
-          -e "s,$FROM,$TARGET," "$from" >"$target" || ret=$?
-
-      # Check whether header files must be updated.
-      if test $first = no; then
-	if test -f "$realtarget" && cmp -s "$realtarget" "$target"; then
-	  echo "$2" is unchanged
-	  rm -f "$target"
-	else
-          echo updating "$2"
-          mv -f "$target" "$realtarget"
-        fi
-      fi
-    else
-      # A missing file is only an error for the first file.  This
-      # is a blatant hack to let us support using "yacc -d".  If -d
-      # is not specified, we don't want an error when the header
-      # file is "missing".
-      if test $first = yes; then
-        ret=1
-      fi
-    fi
-    shift
-    shift
-    first=no
-  done
-else
-  ret=$?
-fi
-
-# Remove the directory.
-cd ..
-rm -rf $dirname
-
-exit $ret
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End: