Imported Upstream version 4.2.0upstream/4.2.0

26 files changed, 745 insertions, 107 deletions

diff --git a/tests/1.rstest b/tests/1.rstest
index 5c15258..4716e8b 100644
--- a/tests/1.rstest
+++ b/tests/1.rstest
@@ -4,23 +4,23 @@ in:
 'test 1' <> $var or /* some comment */($SEVERITY == -4 +5 -(3 * - 2) and $fromhost == '127.0.0.1') then 
 $$$
 out:
-00000000: PUSHCONSTANT	test 1[cstr]
-00000001: PUSHMSGVAR	var[cstr]
-00000002: !=	
-00000003: PUSHMSGVAR	severity[cstr]
-00000004: PUSHCONSTANT	4[nbr]
-00000005: UNARY_MINUS	
-00000006: PUSHCONSTANT	5[nbr]
-00000007: +	
-00000008: PUSHCONSTANT	3[nbr]
-00000009: PUSHCONSTANT	2[nbr]
-00000010: UNARY_MINUS	
-00000011: *	
-00000012: -	
-00000013: ==	
-00000014: PUSHMSGVAR	fromhost[cstr]
-00000015: PUSHCONSTANT	127.0.0.1[cstr]
-00000016: ==	
+00000000: push_const	test 1[cstr]
+00000001: push_msgvar	var[cstr]
+00000002: cmp_!=	
+00000003: push_msgvar	severity[cstr]
+00000004: push_const	4[nbr]
+00000005: unary_minus	
+00000006: push_const	5[nbr]
+00000007: add	
+00000008: push_const	3[nbr]
+00000009: push_const	2[nbr]
+00000010: unary_minus	
+00000011: mul	
+00000012: sub	
+00000013: cmp_==	
+00000014: push_msgvar	fromhost[cstr]
+00000015: push_const	127.0.0.1[cstr]
+00000016: cmp_==	
 00000017: and	
 00000018: or	
 $$$
diff --git a/tests/2.rstest b/tests/2.rstest
index 7fb5b79..f0e8205 100644
--- a/tests/2.rstest
+++ b/tests/2.rstest
@@ -4,7 +4,7 @@ in:
 $msg contains 'test' then 
 $$$
 out:
-00000000: PUSHMSGVAR	msg[cstr]
-00000001: PUSHCONSTANT	test[cstr]
+00000000: push_msgvar	msg[cstr]
+00000001: push_const	test[cstr]
 00000002: contains	
 $$$
diff --git a/tests/3.rstest b/tests/3.rstest
new file mode 100644
index 0000000..93cb941
--- /dev/null
+++ b/tests/3.rstest
@@ -0,0 +1,21 @@
+# a simple RainerScript test
+result: 0
+in:
+strlen($msg & strlen('abc')) > 20 +30 + -40 then
+$$$
+out:
+00000000: push_msgvar	msg[cstr]
+00000001: push_const	abc[cstr]
+00000002: push_const	1[nbr]
+00000003: func_call	strlen[cstr]
+00000004: strconcat	
+00000005: push_const	1[nbr]
+00000006: func_call	strlen[cstr]
+00000007: push_const	20[nbr]
+00000008: push_const	30[nbr]
+00000009: add	
+00000010: push_const	40[nbr]
+00000011: unary_minus	
+00000012: add	
+00000013: cmp_>	
+$$$
diff --git a/tests/DevNull.cfgtest b/tests/DevNull.cfgtest
index d30d936..7822b6d 100644
--- a/tests/DevNull.cfgtest
+++ b/tests/DevNull.cfgtest
@@ -1,3 +1,2 @@
 rsyslogd: CONFIG ERROR: there are no active actions configured. Inputs will run, but no output whatsoever is created. [try http://www.rsyslog.com/e/2103 ]
 rsyslogd: EMERGENCY CONFIGURATION ACTIVATED - fix rsyslog config file!
-rsyslogd: End of config validation run. Bye.
diff --git a/tests/Makefile.am b/tests/Makefile.am
index 14e7c19..02c67d8 100644
--- a/tests/Makefile.am
+++ b/tests/Makefile.am
@@ -1,10 +1,16 @@
-check_PROGRAMS = rt_init rscript
-TESTS = $(check_PROGRAMS) cfg.sh
+<<<<<<< HEAD:tests/Makefile.am
+TESTRUNS = rt_init rscript
+check_PROGRAMS = $(TESTRUNS) ourtail udptester
+TESTS = $(TESTRUNS) cfg.sh parsertest.sh omod-if-array.sh \
+	validation-run.sh
 TESTS_ENVIRONMENT = RSYSLOG_MODDIR='$(abs_top_builddir)'/runtime/.libs/
-#TESTS = $(check_PROGRAMS)
-
+DISTCLEANFILES=rsyslog.pid
 test_files = testbench.h runtime-dummy.c
-EXTRA_DIST=1.rstest 2.rstest err1.rstest \
+
+EXTRA_DIST= 1.rstest 2.rstest 3.rstest err1.rstest \
+	   validation-run.sh \
+	   testsuites/invalid.conf \
+	   testsuites/valid.conf \
 	   cfg.sh \
 	   cfg1.cfgtest \
 	   cfg1.testin \
@@ -16,14 +22,31 @@ EXTRA_DIST=1.rstest 2.rstest err1.rstest \
 	   cfg4.testin \
 	   DevNull.cfgtest \
 	   err1.rstest \
-	   NoExistFile.cfgtest
+	   NoExistFile.cfgtest \
+	   testsuites/parse1.conf \
+	   testsuites/1.parse1 \
+   	   testsuites/rfc3164.parse1 \
+	   testsuites/rfc5424-1.parse1 \
+	   testsuites/rfc5424-2.parse1 \
+	   testsuites/rfc5424-3.parse1 \
+	   testsuites/rfc5424-4.parse1 \
+	   testsuites/omod-if-array.conf \
+	   testsuites/1.omod-if-array \
+	   parsertest.sh \
+	   omod-if-array.sh \
+	   cfg.sh
+
+ourtail_SOURCES = ourtail.c
+
+udptester_SOURCES = udptester.c getline.c
+udptester_LDADD = $(SOL_LIBS)
 
 rt_init_SOURCES = rt-init.c $(test_files)
 rt_init_CPPFLAGS =  -I$(top_srcdir) $(PTHREADS_CFLAGS) $(RSRT_CFLAGS)
-rt_init_LDADD = $(RSRT_LIBS) $(ZLIB_LIBS) $(PTHREADS_LIBS)
+rt_init_LDADD = $(RSRT_LIBS) $(ZLIB_LIBS) $(PTHREADS_LIBS) $(SOL_LIBS)
 rt_init_LDFLAGS = -export-dynamic
 
-rscript_SOURCES = rscript.c $(test_files)
+rscript_SOURCES = rscript.c getline.c $(test_files)
 rscript_CPPFLAGS =  -I$(top_srcdir) $(PTHREADS_CFLAGS) $(RSRT_CFLAGS)
-rscript_LDADD = $(RSRT_LIBS) $(ZLIB_LIBS) $(PTHREADS_LIBS)
+rscript_LDADD = $(RSRT_LIBS) $(ZLIB_LIBS) $(PTHREADS_LIBS) $(SOL_LIBS)
 rscript_LDFLAGS = -export-dynamic
diff --git a/tests/Makefile.in b/tests/Makefile.in
index 77239c5..50a45f5 100644
--- a/tests/Makefile.in
+++ b/tests/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,8 +16,9 @@
 @SET_MAKE@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -31,7 +33,9 @@ PRE_UNINSTALL = :
 POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
-check_PROGRAMS = rt_init$(EXEEXT) rscript$(EXEEXT)
+check_PROGRAMS = $(am__EXEEXT_1) ourtail$(EXEEXT) udptester$(EXEEXT)
+TESTS = $(am__EXEEXT_1) cfg.sh parsertest.sh omod-if-array.sh \
+	validation-run.sh
 subdir = tests
 DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
@@ -42,12 +46,18 @@ am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__EXEEXT_1 = rt_init$(EXEEXT) rscript$(EXEEXT)
+am_ourtail_OBJECTS = ourtail.$(OBJEXT)
+ourtail_OBJECTS = $(am_ourtail_OBJECTS)
+ourtail_LDADD = $(LDADD)
 am__objects_1 = rscript-runtime-dummy.$(OBJEXT)
-am_rscript_OBJECTS = rscript-rscript.$(OBJEXT) $(am__objects_1)
+am_rscript_OBJECTS = rscript-rscript.$(OBJEXT) \
+	rscript-getline.$(OBJEXT) $(am__objects_1)
 rscript_OBJECTS = $(am_rscript_OBJECTS)
 am__DEPENDENCIES_1 =
 rscript_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
-	$(am__DEPENDENCIES_1)
+	$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1)
 rscript_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(rscript_LDFLAGS) \
 	$(LDFLAGS) -o $@
@@ -55,13 +65,17 @@ am__objects_2 = rt_init-runtime-dummy.$(OBJEXT)
 am_rt_init_OBJECTS = rt_init-rt-init.$(OBJEXT) $(am__objects_2)
 rt_init_OBJECTS = $(am_rt_init_OBJECTS)
 rt_init_DEPENDENCIES = $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
-	$(am__DEPENDENCIES_1)
+	$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1)
 rt_init_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(rt_init_LDFLAGS) \
 	$(LDFLAGS) -o $@
+am_udptester_OBJECTS = udptester.$(OBJEXT) getline.$(OBJEXT)
+udptester_OBJECTS = $(am_udptester_OBJECTS)
+udptester_DEPENDENCIES = $(am__DEPENDENCIES_1)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -71,10 +85,14 @@ CCLD = $(CC)
 LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
 	$(LDFLAGS) -o $@
-SOURCES = $(rscript_SOURCES) $(rt_init_SOURCES)
-DIST_SOURCES = $(rscript_SOURCES) $(rt_init_SOURCES)
+SOURCES = $(ourtail_SOURCES) $(rscript_SOURCES) $(rt_init_SOURCES) \
+	$(udptester_SOURCES)
+DIST_SOURCES = $(ourtail_SOURCES) $(rscript_SOURCES) \
+	$(rt_init_SOURCES) $(udptester_SOURCES)
 ETAGS = etags
 CTAGS = ctags
+am__tty_colors = \
+red=; grn=; lgn=; blu=; std=
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
@@ -155,6 +173,7 @@ SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 SNMP_CFLAGS = @SNMP_CFLAGS@
 SNMP_LIBS = @SNMP_LIBS@
+SOL_LIBS = @SOL_LIBS@
 STRIP = @STRIP@
 VERSION = @VERSION@
 ZLIB_LIBS = @ZLIB_LIBS@
@@ -211,11 +230,14 @@ target_alias = @target_alias@
 top_build_prefix = @top_build_prefix@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
-TESTS = $(check_PROGRAMS) cfg.sh
+TESTRUNS = rt_init rscript
 TESTS_ENVIRONMENT = RSYSLOG_MODDIR='$(abs_top_builddir)'/runtime/.libs/
-#TESTS = $(check_PROGRAMS)
+DISTCLEANFILES = rsyslog.pid
 test_files = testbench.h runtime-dummy.c
-EXTRA_DIST = 1.rstest 2.rstest err1.rstest \
+EXTRA_DIST = 1.rstest 2.rstest 3.rstest err1.rstest \
+	   validation-run.sh \
+	   testsuites/invalid.conf \
+	   testsuites/valid.conf \
 	   cfg.sh \
 	   cfg1.cfgtest \
 	   cfg1.testin \
@@ -227,15 +249,30 @@ EXTRA_DIST = 1.rstest 2.rstest err1.rstest \
 	   cfg4.testin \
 	   DevNull.cfgtest \
 	   err1.rstest \
-	   NoExistFile.cfgtest
-
+	   NoExistFile.cfgtest \
+	   testsuites/parse1.conf \
+	   testsuites/1.parse1 \
+   	   testsuites/rfc3164.parse1 \
+	   testsuites/rfc5424-1.parse1 \
+	   testsuites/rfc5424-2.parse1 \
+	   testsuites/rfc5424-3.parse1 \
+	   testsuites/rfc5424-4.parse1 \
+	   testsuites/omod-if-array.conf \
+	   testsuites/1.omod-if-array \
+	   parsertest.sh \
+	   omod-if-array.sh \
+	   cfg.sh
+
+ourtail_SOURCES = ourtail.c
+udptester_SOURCES = udptester.c getline.c
+udptester_LDADD = $(SOL_LIBS)
 rt_init_SOURCES = rt-init.c $(test_files)
 rt_init_CPPFLAGS = -I$(top_srcdir) $(PTHREADS_CFLAGS) $(RSRT_CFLAGS)
-rt_init_LDADD = $(RSRT_LIBS) $(ZLIB_LIBS) $(PTHREADS_LIBS)
+rt_init_LDADD = $(RSRT_LIBS) $(ZLIB_LIBS) $(PTHREADS_LIBS) $(SOL_LIBS)
 rt_init_LDFLAGS = -export-dynamic
-rscript_SOURCES = rscript.c $(test_files)
+rscript_SOURCES = rscript.c getline.c $(test_files)
 rscript_CPPFLAGS = -I$(top_srcdir) $(PTHREADS_CFLAGS) $(RSRT_CFLAGS)
-rscript_LDADD = $(RSRT_LIBS) $(ZLIB_LIBS) $(PTHREADS_LIBS)
+rscript_LDADD = $(RSRT_LIBS) $(ZLIB_LIBS) $(PTHREADS_LIBS) $(SOL_LIBS)
 rscript_LDFLAGS = -export-dynamic
 all: all-am
 
@@ -245,14 +282,14 @@ $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  tests/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  tests/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu tests/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -270,19 +307,28 @@ $(top_srcdir)/configure:  $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-checkPROGRAMS:
-	@list='$(check_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
+	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+ourtail$(EXEEXT): $(ourtail_OBJECTS) $(ourtail_DEPENDENCIES) 
+	@rm -f ourtail$(EXEEXT)
+	$(LINK) $(ourtail_OBJECTS) $(ourtail_LDADD) $(LIBS)
 rscript$(EXEEXT): $(rscript_OBJECTS) $(rscript_DEPENDENCIES) 
 	@rm -f rscript$(EXEEXT)
 	$(rscript_LINK) $(rscript_OBJECTS) $(rscript_LDADD) $(LIBS)
 rt_init$(EXEEXT): $(rt_init_OBJECTS) $(rt_init_DEPENDENCIES) 
 	@rm -f rt_init$(EXEEXT)
 	$(rt_init_LINK) $(rt_init_OBJECTS) $(rt_init_LDADD) $(LIBS)
+udptester$(EXEEXT): $(udptester_OBJECTS) $(udptester_DEPENDENCIES) 
+	@rm -f udptester$(EXEEXT)
+	$(LINK) $(udptester_OBJECTS) $(udptester_LDADD) $(LIBS)
 
 mostlyclean-compile:
 	-rm -f *.$(OBJEXT)
@@ -290,84 +336,102 @@ mostlyclean-compile:
 distclean-compile:
 	-rm -f *.tab.c
 
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getline.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ourtail.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rscript-getline.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rscript-rscript.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rscript-runtime-dummy.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rt_init-rt-init.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rt_init-runtime-dummy.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/udptester.Po@am__quote@
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 rscript-rscript.o: rscript.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(rscript_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT rscript-rscript.o -MD -MP -MF $(DEPDIR)/rscript-rscript.Tpo -c -o rscript-rscript.o `test -f 'rscript.c' || echo '$(srcdir)/'`rscript.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/rscript-rscript.Tpo $(DEPDIR)/rscript-rscript.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/rscript-rscript.Tpo $(DEPDIR)/rscript-rscript.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='rscript.c' object='rscript-rscript.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(rscript_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o rscript-rscript.o `test -f 'rscript.c' || echo '$(srcdir)/'`rscript.c
 
 rscript-rscript.obj: rscript.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(rscript_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT rscript-rscript.obj -MD -MP -MF $(DEPDIR)/rscript-rscript.Tpo -c -o rscript-rscript.obj `if test -f 'rscript.c'; then $(CYGPATH_W) 'rscript.c'; else $(CYGPATH_W) '$(srcdir)/rscript.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/rscript-rscript.Tpo $(DEPDIR)/rscript-rscript.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/rscript-rscript.Tpo $(DEPDIR)/rscript-rscript.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='rscript.c' object='rscript-rscript.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(rscript_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o rscript-rscript.obj `if test -f 'rscript.c'; then $(CYGPATH_W) 'rscript.c'; else $(CYGPATH_W) '$(srcdir)/rscript.c'; fi`
 
+rscript-getline.o: getline.c
+@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(rscript_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT rscript-getline.o -MD -MP -MF $(DEPDIR)/rscript-getline.Tpo -c -o rscript-getline.o `test -f 'getline.c' || echo '$(srcdir)/'`getline.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/rscript-getline.Tpo $(DEPDIR)/rscript-getline.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='getline.c' object='rscript-getline.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(rscript_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o rscript-getline.o `test -f 'getline.c' || echo '$(srcdir)/'`getline.c
+
+rscript-getline.obj: getline.c
+@am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(rscript_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT rscript-getline.obj -MD -MP -MF $(DEPDIR)/rscript-getline.Tpo -c -o rscript-getline.obj `if test -f 'getline.c'; then $(CYGPATH_W) 'getline.c'; else $(CYGPATH_W) '$(srcdir)/getline.c'; fi`
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/rscript-getline.Tpo $(DEPDIR)/rscript-getline.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='getline.c' object='rscript-getline.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(rscript_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o rscript-getline.obj `if test -f 'getline.c'; then $(CYGPATH_W) 'getline.c'; else $(CYGPATH_W) '$(srcdir)/getline.c'; fi`
+
 rscript-runtime-dummy.o: runtime-dummy.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(rscript_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT rscript-runtime-dummy.o -MD -MP -MF $(DEPDIR)/rscript-runtime-dummy.Tpo -c -o rscript-runtime-dummy.o `test -f 'runtime-dummy.c' || echo '$(srcdir)/'`runtime-dummy.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/rscript-runtime-dummy.Tpo $(DEPDIR)/rscript-runtime-dummy.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/rscript-runtime-dummy.Tpo $(DEPDIR)/rscript-runtime-dummy.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='runtime-dummy.c' object='rscript-runtime-dummy.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(rscript_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o rscript-runtime-dummy.o `test -f 'runtime-dummy.c' || echo '$(srcdir)/'`runtime-dummy.c
 
 rscript-runtime-dummy.obj: runtime-dummy.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(rscript_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT rscript-runtime-dummy.obj -MD -MP -MF $(DEPDIR)/rscript-runtime-dummy.Tpo -c -o rscript-runtime-dummy.obj `if test -f 'runtime-dummy.c'; then $(CYGPATH_W) 'runtime-dummy.c'; else $(CYGPATH_W) '$(srcdir)/runtime-dummy.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/rscript-runtime-dummy.Tpo $(DEPDIR)/rscript-runtime-dummy.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/rscript-runtime-dummy.Tpo $(DEPDIR)/rscript-runtime-dummy.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='runtime-dummy.c' object='rscript-runtime-dummy.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(rscript_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o rscript-runtime-dummy.obj `if test -f 'runtime-dummy.c'; then $(CYGPATH_W) 'runtime-dummy.c'; else $(CYGPATH_W) '$(srcdir)/runtime-dummy.c'; fi`
 
 rt_init-rt-init.o: rt-init.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(rt_init_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT rt_init-rt-init.o -MD -MP -MF $(DEPDIR)/rt_init-rt-init.Tpo -c -o rt_init-rt-init.o `test -f 'rt-init.c' || echo '$(srcdir)/'`rt-init.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/rt_init-rt-init.Tpo $(DEPDIR)/rt_init-rt-init.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/rt_init-rt-init.Tpo $(DEPDIR)/rt_init-rt-init.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='rt-init.c' object='rt_init-rt-init.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(rt_init_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o rt_init-rt-init.o `test -f 'rt-init.c' || echo '$(srcdir)/'`rt-init.c
 
 rt_init-rt-init.obj: rt-init.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(rt_init_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT rt_init-rt-init.obj -MD -MP -MF $(DEPDIR)/rt_init-rt-init.Tpo -c -o rt_init-rt-init.obj `if test -f 'rt-init.c'; then $(CYGPATH_W) 'rt-init.c'; else $(CYGPATH_W) '$(srcdir)/rt-init.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/rt_init-rt-init.Tpo $(DEPDIR)/rt_init-rt-init.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/rt_init-rt-init.Tpo $(DEPDIR)/rt_init-rt-init.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='rt-init.c' object='rt_init-rt-init.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(rt_init_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o rt_init-rt-init.obj `if test -f 'rt-init.c'; then $(CYGPATH_W) 'rt-init.c'; else $(CYGPATH_W) '$(srcdir)/rt-init.c'; fi`
 
 rt_init-runtime-dummy.o: runtime-dummy.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(rt_init_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT rt_init-runtime-dummy.o -MD -MP -MF $(DEPDIR)/rt_init-runtime-dummy.Tpo -c -o rt_init-runtime-dummy.o `test -f 'runtime-dummy.c' || echo '$(srcdir)/'`runtime-dummy.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/rt_init-runtime-dummy.Tpo $(DEPDIR)/rt_init-runtime-dummy.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/rt_init-runtime-dummy.Tpo $(DEPDIR)/rt_init-runtime-dummy.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='runtime-dummy.c' object='rt_init-runtime-dummy.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(rt_init_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o rt_init-runtime-dummy.o `test -f 'runtime-dummy.c' || echo '$(srcdir)/'`runtime-dummy.c
 
 rt_init-runtime-dummy.obj: runtime-dummy.c
 @am__fastdepCC_TRUE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(rt_init_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT rt_init-runtime-dummy.obj -MD -MP -MF $(DEPDIR)/rt_init-runtime-dummy.Tpo -c -o rt_init-runtime-dummy.obj `if test -f 'runtime-dummy.c'; then $(CYGPATH_W) 'runtime-dummy.c'; else $(CYGPATH_W) '$(srcdir)/runtime-dummy.c'; fi`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/rt_init-runtime-dummy.Tpo $(DEPDIR)/rt_init-runtime-dummy.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/rt_init-runtime-dummy.Tpo $(DEPDIR)/rt_init-runtime-dummy.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='runtime-dummy.c' object='rt_init-runtime-dummy.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(rt_init_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o rt_init-runtime-dummy.obj `if test -f 'runtime-dummy.c'; then $(CYGPATH_W) 'runtime-dummy.c'; else $(CYGPATH_W) '$(srcdir)/runtime-dummy.c'; fi`
@@ -383,14 +447,14 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -398,37 +462,43 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
 check-TESTS: $(TESTS)
-	@failed=0; all=0; xfail=0; xpass=0; skip=0; ws='[	 ]'; \
+	@failed=0; all=0; xfail=0; xpass=0; skip=0; \
 	srcdir=$(srcdir); export srcdir; \
 	list=' $(TESTS) '; \
+	$(am__tty_colors); \
 	if test -n "$$list"; then \
 	  for tst in $$list; do \
 	    if test -f ./$$tst; then dir=./; \
@@ -437,49 +507,63 @@ check-TESTS: $(TESTS)
 	    if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
 	      all=`expr $$all + 1`; \
 	      case " $(XFAIL_TESTS) " in \
-	      *$$ws$$tst$$ws*) \
+	      *[\ \	]$$tst[\ \	]*) \
 		xpass=`expr $$xpass + 1`; \
 		failed=`expr $$failed + 1`; \
-		echo "XPASS: $$tst"; \
+		col=$$red; res=XPASS; \
 	      ;; \
 	      *) \
-		echo "PASS: $$tst"; \
+		col=$$grn; res=PASS; \
 	      ;; \
 	      esac; \
 	    elif test $$? -ne 77; then \
 	      all=`expr $$all + 1`; \
 	      case " $(XFAIL_TESTS) " in \
-	      *$$ws$$tst$$ws*) \
+	      *[\ \	]$$tst[\ \	]*) \
 		xfail=`expr $$xfail + 1`; \
-		echo "XFAIL: $$tst"; \
+		col=$$lgn; res=XFAIL; \
 	      ;; \
 	      *) \
 		failed=`expr $$failed + 1`; \
-		echo "FAIL: $$tst"; \
+		col=$$red; res=FAIL; \
 	      ;; \
 	      esac; \
 	    else \
 	      skip=`expr $$skip + 1`; \
-	      echo "SKIP: $$tst"; \
+	      col=$$blu; res=SKIP; \
 	    fi; \
+	    echo "$${col}$$res$${std}: $$tst"; \
 	  done; \
+	  if test "$$all" -eq 1; then \
+	    tests="test"; \
+	    All=""; \
+	  else \
+	    tests="tests"; \
+	    All="All "; \
+	  fi; \
 	  if test "$$failed" -eq 0; then \
 	    if test "$$xfail" -eq 0; then \
-	      banner="All $$all tests passed"; \
+	      banner="$$All$$all $$tests passed"; \
 	    else \
-	      banner="All $$all tests behaved as expected ($$xfail expected failures)"; \
+	      if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \
+	      banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \
 	    fi; \
 	  else \
 	    if test "$$xpass" -eq 0; then \
-	      banner="$$failed of $$all tests failed"; \
+	      banner="$$failed of $$all $$tests failed"; \
 	    else \
-	      banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \
+	      if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \
+	      banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \
 	    fi; \
 	  fi; \
 	  dashes="$$banner"; \
 	  skipped=""; \
 	  if test "$$skip" -ne 0; then \
-	    skipped="($$skip tests were not run)"; \
+	    if test "$$skip" -eq 1; then \
+	      skipped="($$skip test was not run)"; \
+	    else \
+	      skipped="($$skip tests were not run)"; \
+	    fi; \
 	    test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
 	      dashes="$$skipped"; \
 	  fi; \
@@ -490,11 +574,15 @@ check-TESTS: $(TESTS)
 	      dashes="$$report"; \
 	  fi; \
 	  dashes=`echo "$$dashes" | sed s/./=/g`; \
-	  echo "$$dashes"; \
+	  if test "$$failed" -eq 0; then \
+	    echo "$$grn$$dashes"; \
+	  else \
+	    echo "$$red$$dashes"; \
+	  fi; \
 	  echo "$$banner"; \
 	  test -z "$$skipped" || echo "$$skipped"; \
 	  test -z "$$report" || echo "$$report"; \
-	  echo "$$dashes"; \
+	  echo "$$dashes$$std"; \
 	  test "$$failed" -eq 0; \
 	else :; fi
 
@@ -514,13 +602,17 @@ distdir: $(DISTFILES)
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -550,6 +642,8 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -571,6 +665,8 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -579,18 +675,28 @@ install-data-am:
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -613,7 +719,7 @@ ps-am:
 
 uninstall-am:
 
-.MAKE: install-am install-strip
+.MAKE: check-am install-am install-strip
 
 .PHONY: CTAGS GTAGS all all-am check check-TESTS check-am clean \
 	clean-checkPROGRAMS clean-generic clean-libtool ctags \
@@ -629,6 +735,8 @@ uninstall-am:
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
 	tags uninstall uninstall-am
 
+<<<<<<< HEAD:tests/Makefile.am
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
diff --git a/tests/NoExistFile.cfgtest b/tests/NoExistFile.cfgtest
index 4cbcc02..88d3123 100644
--- a/tests/NoExistFile.cfgtest
+++ b/tests/NoExistFile.cfgtest
@@ -1,3 +1,2 @@
 rsyslogd: CONFIG ERROR: could not interpret master config file '/This/does/not/exist'. [try http://www.rsyslog.com/e/2013 ]
 rsyslogd: EMERGENCY CONFIGURATION ACTIVATED - fix rsyslog config file!
-rsyslogd: End of config validation run. Bye.
diff --git a/tests/cfg.sh b/tests/cfg.sh
index 9972982..cb83835 100755
--- a/tests/cfg.sh
+++ b/tests/cfg.sh
@@ -36,7 +36,7 @@ echo "local directory"
 #
 # check empty config file
 #
-../tools/rsyslogd -c3 -N1 -f/dev/null 2>&1 |tail --lines=+2 > tmp
+../tools/rsyslogd -c4 -N1 -f/dev/null 2>&1 |./ourtail |head -2 > tmp
 cmp tmp $srcdir/DevNull.cfgtest
 if [ ! $? -eq 0 ]; then
 echo "DevNull.cfgtest failed"
@@ -51,7 +51,7 @@ fi;
 #
 # check missing config file
 #
-../tools/rsyslogd -c3 -N1 -f/This/does/not/exist 2>&1 |tail --lines=+2 > tmp
+../tools/rsyslogd -c4 -N1 -f/This/does/not/exist 2>&1 |./ourtail |head -2 > tmp
 cmp tmp $srcdir/NoExistFile.cfgtest
 if [ ! $? -eq 0 ]; then
 echo "NoExistFile.cfgtest failed"
@@ -74,7 +74,7 @@ exit 0
 #
 # check config with invalid directive
 #
-../tools/rsyslogd -c3 -u2 -N1 -f$srcdir/cfg1.testin 2>&1 |tail --lines=+2 > tmp
+../tools/rsyslogd -c4 -u2 -N1 -f$srcdir/cfg1.testin 2>&1 |./ourtail > tmp
 cmp tmp $srcdir/cfg1.cfgtest
 if [ ! $? -eq 0 ]; then
 echo "cfg1.cfgtest failed"
@@ -91,7 +91,7 @@ fi;
 # the one with the invalid config directive, so that we may see
 # an effect of the included config ;)
 #
-../tools/rsyslogd -c3 -u2 -N1 -f$srcdir/cfg2.testin 2>&1 |tail --lines=+2 > tmp
+../tools/rsyslogd -c4 -u2 -N1 -f$srcdir/cfg2.testin 2>&1 |./ourtail > tmp
 cmp tmp $srcdir/cfg2.cfgtest
 if [ ! $? -eq 0 ]; then
 echo "cfg2.cfgtest failed"
@@ -106,7 +106,7 @@ fi;
 #
 # check included config file, where included file does not exist
 #
-../tools/rsyslogd -c3 -u2 -N1 -f$srcdir/cfg3.testin 2>&1 |tail --lines=+2 > tmp
+../tools/rsyslogd -c4 -u2 -N1 -f$srcdir/cfg3.testin 2>&1 |./ourtail > tmp
 cmp tmp $srcdir/cfg3.cfgtest
 if [ ! $? -eq 0 ]; then
 echo "cfg3.cfgtest failed"
@@ -121,7 +121,7 @@ fi;
 #
 # check a reasonable complex, but correct, log file
 #
-../tools/rsyslogd -c3 -u2 -N1 -f$srcdir/cfg4.testin 2>&1 |tail --lines=+2 > tmp
+../tools/rsyslogd -c4 -u2 -N1 -f$srcdir/cfg4.testin 2>&1 |./ourtail > tmp
 cmp tmp $srcdir/cfg4.cfgtest
 if [ ! $? -eq 0 ]; then
 echo "cfg4.cfgtest failed"
diff --git a/tests/getline.c b/tests/getline.c
new file mode 100644
index 0000000..10de2ff
--- /dev/null
+++ b/tests/getline.c
@@ -0,0 +1,56 @@
+/* getline() replacement for platforms that do not have it.
+ *
+ * Part of the testbench for rsyslog.
+ *
+ * Copyright 2009 Rainer Gerhards and Adiscon GmbH.
+ *
+ * This file is part of rsyslog.
+ *
+ * Rsyslog is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * Rsyslog is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with Rsyslog.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * A copy of the GPL can be found in the file "COPYING" in this distribution.
+ */
+#include "config.h"
+#include <stdio.h>
+#include <malloc.h>
+
+/* we emulate getline (the dirty way) if we do not have it
+ * We do not try very hard, as this is just a test driver.
+ * rgerhards, 2009-03-31
+ */
+#ifndef HAVE_GETLINE
+ssize_t getline(char **lineptr, size_t *n, FILE *fp)
+{
+	int c;
+	int len = 0;
+
+	if(*lineptr == NULL)
+		*lineptr = malloc(4096); /* quick and dirty! */
+
+	c = fgetc(fp);
+	while(c != EOF && c != '\n') {
+		(*lineptr)[len++] = c;
+		c = fgetc(fp);
+	}
+	if(c != EOF) /* need to add NL? */
+		(*lineptr)[len++] = c;
+	
+	(*lineptr)[len] = '\0';
+
+	*n = len;
+	//printf("getline returns: '%s'\n", *lineptr);
+
+	return (len > 0) ? len : -1;
+}
+#endif /* #ifndef HAVE_GETLINE */
diff --git a/tests/omod-if-array.sh b/tests/omod-if-array.sh
new file mode 100755
index 0000000..cac0892
--- /dev/null
+++ b/tests/omod-if-array.sh
@@ -0,0 +1 @@
+./udptester omod-if-array
diff --git a/tests/ourtail.c b/tests/ourtail.c
new file mode 100644
index 0000000..f2751c7
--- /dev/null
+++ b/tests/ourtail.c
@@ -0,0 +1,43 @@
+/* This is a quick and dirty "tail implementation", one which always
+ * skips the first line, but nothing else. I have done this to prevent
+ * the various incompatible options of tail come into my way. One could
+ * probably work around this by using autoconf magic, but for me it
+ * was much quicker writing this small C program, which really should
+ * be portable across all platforms.
+ *
+ * Part of the testbench for rsyslog.
+ *
+ * Copyright 2009 Rainer Gerhards and Adiscon GmbH.
+ *
+ * This file is part of rsyslog.
+ *
+ * Rsyslog is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * Rsyslog is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with Rsyslog.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * A copy of the GPL can be found in the file "COPYING" in this distribution.
+ */
+#include <stdio.h>
+
+int main(int argc, char *argv[])
+{
+	int c;
+
+	for(c = getchar() ; c != EOF && c != '\n' ; c = getchar())
+		/*skip to newline*/;
+
+	if(c == '\n')
+		c = getchar();
+
+	for( ; c != EOF ; c = getchar())
+		putchar(c);
+}
diff --git a/tests/parsertest.sh b/tests/parsertest.sh
new file mode 100755
index 0000000..e7985bb
--- /dev/null
+++ b/tests/parsertest.sh
@@ -0,0 +1 @@
+./udptester parse1
diff --git a/tests/rscript.c b/tests/rscript.c
index d4e8cae..6b232f5 100644
--- a/tests/rscript.c
+++ b/tests/rscript.c
@@ -39,6 +39,7 @@ DEFobjCurrIf(ctok)
 DEFobjCurrIf(ctok_token)
 DEFobjCurrIf(vmprg)
 
+
 BEGINInit
 CODESTARTInit
 	pErrObj = "expr"; CHKiRet(objUse(expr, CORE_COMPONENT));
@@ -102,8 +103,8 @@ PerformTest(cstr_t *pstrIn, rsRetVal iRetExpected, cstr_t *pstrOut)
 
 	if(strcmp((char*)rsCStrGetSzStr(pstrPrg), (char*)rsCStrGetSzStr(pstrOut))) {
 		printf("error: compiled program different from expected result!\n");
-		printf("generated vmprg:\n%s\n", rsCStrGetSzStr(pstrPrg));
-		printf("expected:\n%s\n", rsCStrGetSzStr(pstrOut));
+		printf("generated vmprg (%d bytes):\n%s\n", strlen((char*)rsCStrGetSzStr(pstrPrg)), rsCStrGetSzStr(pstrPrg));
+		printf("expected (%d bytes):\n%s\n", strlen((char*)rsCStrGetSzStr(pstrOut)), rsCStrGetSzStr(pstrOut));
 		ABORT_FINALIZE(RS_RET_ERR);
 	}
 
@@ -138,6 +139,7 @@ ProcessTestFile(uchar *pszFileName)
 	size_t lenLn;
 	cstr_t *pstrIn = NULL;
 	cstr_t *pstrOut = NULL;
+	int iParse;
 	rsRetVal iRetExpected;
 	DEFiRet;
 
@@ -160,10 +162,11 @@ ProcessTestFile(uchar *pszFileName)
 	/* once we had a comment, the next line MUST be "result: <nbr>". Anything
 	 * after nbr is simply ignored.
 	 */
-	if(sscanf(lnptr, "result: %d", &iRetExpected) != 1) {
+	if(sscanf(lnptr, "result: %d", &iParse) != 1) {
 		printf("error in result line, scanf failed, line: '%s'\n", lnptr);
 		ABORT_FINALIZE(RS_RET_ERR);
 	}
+	iRetExpected = iParse;
 	getline(&lnptr, &lenLn, fp); CHKEOF;
 
 	/* and now we look for "in:" (and again ignore the rest...) */
diff --git a/tests/testsuites/1.omod-if-array b/tests/testsuites/1.omod-if-array
new file mode 100644
index 0000000..c464b19
--- /dev/null
+++ b/tests/testsuites/1.omod-if-array
@@ -0,0 +1,2 @@
+<167>Mar  6 16:57:54 172.20.245.8 %PIX-7-710005: UDP request discarded from SERVER1/2741 to test_app:255.255.255.255/61601
+167,Mar  6 16:57:54,172.20.245.8,%PIX-7-710005,%PIX-7-710005:,
diff --git a/tests/testsuites/1.parse1 b/tests/testsuites/1.parse1
new file mode 100644
index 0000000..5ae655e
--- /dev/null
+++ b/tests/testsuites/1.parse1
@@ -0,0 +1,3 @@
+<167>Mar  6 16:57:54 172.20.245.8 %PIX-7-710005: UDP request discarded from SERVER1/2741 to test_app:255.255.255.255/61601
+167,local4,debug,Mar  6 16:57:54,172.20.245.8,%PIX-7-710005,%PIX-7-710005:, UDP request discarded from SERVER1/2741 to test_app:255.255.255.255/61601
+#Only the first two lines are important, you may place anything behind them!
diff --git a/tests/testsuites/invalid.conf b/tests/testsuites/invalid.conf
new file mode 100644
index 0000000..8a865ba
--- /dev/null
+++ b/tests/testsuites/invalid.conf
@@ -0,0 +1,3 @@
+# This is an invalid config file that shall trigger an exit code
+# with the config verification run
+$invalid
diff --git a/tests/testsuites/omod-if-array.conf b/tests/testsuites/omod-if-array.conf
new file mode 100644
index 0000000..e6c05a5
--- /dev/null
+++ b/tests/testsuites/omod-if-array.conf
@@ -0,0 +1,14 @@
+# Test config for array-passing output module interface
+# (stanard string passing is already tested via the other test inside
+# the testbench, so we do not need to focus on that)
+# rgerhards, 2009-04-03
+$ModLoad ../plugins/omstdout/.libs/omstdout
+$ModLoad ../plugins/imudp/.libs/imudp
+$UDPServerRun 12514
+
+$ActionOMStdoutArrayInterface on 
+$ErrorMessagesToStderr off
+
+# do NOT remove \n, that would hang the test driver!
+$template expect,"%PRI%%timestamp%%hostname%%programname%%syslogtag%\n"
+*.* :omstdout:;expect
diff --git a/tests/testsuites/parse1.conf b/tests/testsuites/parse1.conf
new file mode 100644
index 0000000..0fb7d16
--- /dev/null
+++ b/tests/testsuites/parse1.conf
@@ -0,0 +1,9 @@
+$ModLoad ../plugins/omstdout/.libs/omstdout
+$ModLoad ../plugins/imudp/.libs/imudp
+$UDPServerRun 12514
+
+$ErrorMessagesToStderr off
+
+# use a special format that we can easily parse in expect
+$template expect,"%PRI%,%syslogfacility-text%,%syslogseverity-text%,%timestamp%,%hostname%,%programname%,%syslogtag%,%msg%\n"
+*.* :omstdout:;expect
diff --git a/tests/testsuites/rfc3164.parse1 b/tests/testsuites/rfc3164.parse1
new file mode 100644
index 0000000..e7a5fa1
--- /dev/null
+++ b/tests/testsuites/rfc3164.parse1
@@ -0,0 +1,4 @@
+<34>Oct 11 22:14:15 mymachine su: 'su root' failed for lonvick on /dev/pts/8
+34,auth,crit,Oct 11 22:14:15,mymachine,su,su:, 'su root' failed for lonvick on /dev/pts/8
+#Example from RFC3164, section 5.4
+#Only the first two lines are important, you may place anything behind them!
diff --git a/tests/testsuites/rfc5424-1.parse1 b/tests/testsuites/rfc5424-1.parse1
new file mode 100644
index 0000000..23836c9
--- /dev/null
+++ b/tests/testsuites/rfc5424-1.parse1
@@ -0,0 +1,3 @@
+#Example from RFC5424, section 6.5 / sample 1
+<34>1 2003-10-11T22:14:15.003Z mymachine.example.com su - ID47 - BOM'su root' failed for lonvick on /dev/pts/8
+34,auth,crit,Oct 11 22:14:15,mymachine.example.com,,su,- BOM'su root' failed for lonvick on /dev/pts/8
diff --git a/tests/testsuites/rfc5424-2.parse1 b/tests/testsuites/rfc5424-2.parse1
new file mode 100644
index 0000000..a86fbc3
--- /dev/null
+++ b/tests/testsuites/rfc5424-2.parse1
@@ -0,0 +1,4 @@
+<165>1 2003-08-24T05:14:15.000003-07:00 192.0.2.1 myproc 8710 - - %% It's time to make the do-nuts.
+165,local4,notice,Aug 24 05:14:15,192.0.2.1,,myproc[8710],- %% It's time to make the do-nuts.
+#Example from RFC5424, section 6.5 / sample 2
+#Only the first two lines are important, you may place anything behind them!
diff --git a/tests/testsuites/rfc5424-3.parse1 b/tests/testsuites/rfc5424-3.parse1
new file mode 100644
index 0000000..6ad4073
--- /dev/null
+++ b/tests/testsuites/rfc5424-3.parse1
@@ -0,0 +1,4 @@
+<165>1 2003-10-11T22:14:15.003Z mymachine.example.com evntslog - ID47 [exampleSDID@32473 iut="3" eventSource= "Application" eventID="1011"][examplePriority@32473 class="high"]
+165,local4,notice,Oct 11 22:14:15,mymachine.example.com,,evntslog,
+#Example from RFC5424, section 6.5 / sample 4
+#Only the first two lines are important, you may place anything behind them!
diff --git a/tests/testsuites/rfc5424-4.parse1 b/tests/testsuites/rfc5424-4.parse1
new file mode 100644
index 0000000..ecf27e1
--- /dev/null
+++ b/tests/testsuites/rfc5424-4.parse1
@@ -0,0 +1,4 @@
+<165>1 2003-10-11T22:14:15.003Z mymachine.example.com evntslog - ID47 [exampleSDID@32473 iut="3" eventSource= "Application" eventID="1011"] BOMAn application event log entry...
+165,local4,notice,Oct 11 22:14:15,mymachine.example.com,,evntslog,BOMAn application event log entry...
+#Example from RFC5424, section 6.5 / sample 3
+#Only the first two lines are important, you may place anything behind them!
diff --git a/tests/testsuites/valid.conf b/tests/testsuites/valid.conf
new file mode 100644
index 0000000..250f054
--- /dev/null
+++ b/tests/testsuites/valid.conf
@@ -0,0 +1,3 @@
+# This is an invalid config file that shall trigger an exit code
+# with the config verification run
+*.* /tmp/data.log
diff --git a/tests/udptester.c b/tests/udptester.c
new file mode 100644
index 0000000..a3c6658
--- /dev/null
+++ b/tests/udptester.c
@@ -0,0 +1,293 @@
+/* Runs a test suite on the rsyslog (and later potentially
+ * other things).
+ *
+ * The name of the test suite must be given as argv[1]. In this config,
+ * rsyslogd is loaded with config ./testsuites/<name>.conf and then
+ * test cases ./testsuites/ *.<name> are executed on it. This test driver is
+ * suitable for testing cases where a message sent (via UDP) results in
+ * exactly one response. It can not be used in cases where no response
+ * is expected (that would result in a hang of the test driver).
+ * Note: each test suite can contain many tests, but they all need to work
+ * with the same rsyslog configuration.
+ *
+ * Part of the testbench for rsyslog.
+ *
+ * Copyright 2009 Rainer Gerhards and Adiscon GmbH.
+ *
+ * This file is part of rsyslog.
+ *
+ * Rsyslog is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * Rsyslog is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with Rsyslog.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * A copy of the GPL can be found in the file "COPYING" in this distribution.
+ */
+#include "config.h"
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <sys/wait.h>
+#include <sys/stat.h>
+#include <arpa/inet.h>
+#include <assert.h>
+#include <unistd.h>
+#include <string.h>
+#include <glob.h>
+#include <netinet/in.h>
+
+#define EXIT_FAILURE 1
+
+static char *srcdir;	/* global $srcdir, set so that we can run outside of "make check" */
+static char *testSuite; /* name of current test suite */
+
+
+void readLine(int fd, char *ln)
+{
+	char c;
+	int lenRead;
+	lenRead = read(fd, &c, 1);
+	while(lenRead == 1 && c != '\n') {
+		*ln++ = c;
+		 lenRead = read(fd, &c, 1);
+	}
+	*ln = '\0';
+}
+
+
+/* send a message via UDP
+ * returns 0 if ok, something else otherwise.
+ */
+int
+udpSend(char *buf, int lenBuf)
+{
+	struct sockaddr_in si_other;
+	int s, slen=sizeof(si_other);
+
+	if((s=socket(AF_INET, SOCK_DGRAM, 0))==-1) {
+		perror("socket()");
+		return(1);
+	}
+
+	memset((char *) &si_other, 0, sizeof(si_other));
+	si_other.sin_family = AF_INET;
+	si_other.sin_port = htons(12514);
+	if(inet_aton("127.0.0.1", &si_other.sin_addr)==0) {
+		fprintf(stderr, "inet_aton() failed\n");
+		return(1);
+	}
+
+	if(sendto(s, buf, lenBuf, 0, (struct sockaddr*) &si_other, slen)==-1) {
+		perror("sendto");
+		fprintf(stderr, "sendto() failed\n");
+		return(1);
+	}
+
+	close(s);
+	return 0;
+}
+
+
+/* open pipe to test candidate - so far, this is
+ * always rsyslogd and with a fixed config. Later, we may
+ * change this. Returns 0 if ok, something else otherwise.
+ * rgerhards, 2009-03-31
+ */
+int openPipe(char *configFile, pid_t *pid, int *pfd)
+{
+	int pipefd[2];
+	pid_t cpid;
+	char *newargv[] = {"../tools/rsyslogd", "dummy", "-c4", "-u2", "-n", "-irsyslog.pid",
+			   "-M../runtime//.libs", NULL };
+	char confFile[1024];
+	char *newenviron[] = { NULL };
+
+
+	sprintf(confFile, "-f%s/testsuites/%s.conf", srcdir, configFile);
+	newargv[1] = confFile;
+
+	if (pipe(pipefd) == -1) {
+		perror("pipe");
+		exit(EXIT_FAILURE);
+	}
+
+	cpid = fork();
+	if (cpid == -1) {
+		perror("fork");
+		exit(EXIT_FAILURE);
+	}
+
+	if(cpid == 0) {    /* Child reads from pipe */
+		fclose(stdout);
+		dup(pipefd[1]);
+		close(pipefd[1]);
+		close(pipefd[0]);
+		fclose(stdin);
+		execve("../tools/rsyslogd", newargv, newenviron);
+	} else {            
+		close(pipefd[1]);
+		*pid = cpid;
+		*pfd = pipefd[0];
+	}
+
+	return(0);
+}
+
+
+/* Process a specific test case. File name is provided.
+ * Needs to return 0 if all is OK, something else otherwise.
+ */
+int
+processTestFile(int fd, char *pszFileName)
+{
+	FILE *fp;
+	char *testdata = NULL;
+	char *expected = NULL;
+	int ret = 0;
+	size_t lenLn;
+	char buf[4096];
+
+	if((fp = fopen((char*)pszFileName, "r")) == NULL) {
+		perror((char*)pszFileName);
+		return(2);
+	}
+
+	/* skip comments at start of file */
+
+	getline(&testdata, &lenLn, fp);
+	while(!feof(fp)) {
+		if(*testdata == '#')
+			getline(&testdata, &lenLn, fp);
+		else
+			break; /* first non-comment */
+	}
+
+
+	testdata[strlen(testdata)-1] = '\0'; /* remove \n */
+	/* now we have the test data to send */
+	if(udpSend(testdata, strlen(testdata)) != 0)
+		return(2);
+
+	/* next line is expected output 
+	 * we do not care about EOF here, this will lead to a failure and thus
+	 * draw enough attention. -- rgerhards, 2009-03-31
+	 */
+	getline(&expected, &lenLn, fp);
+	expected[strlen(expected)-1] = '\0'; /* remove \n */
+
+	/* pull response from server and then check if it meets our expectation */
+	readLine(fd, buf);
+	if(strcmp(expected, buf)) {
+		printf("\nExpected Response:\n'%s'\nActual Response:\n'%s'\n",
+			expected, buf);
+			ret = 1;
+	}
+
+	free(testdata);
+	free(expected);
+	fclose(fp);
+	return(ret);
+}
+
+
+/* carry out all tests. Tests are specified via a file name
+ * wildcard. Each of the files is read and the test carried
+ * out.
+ * Returns the number of tests that failed. Zero means all
+ * success.
+ */
+int
+doTests(int fd, char *files)
+{
+	int iFailed = 0;
+	int iTests = 0;
+	int ret;
+	char *testFile;
+	glob_t testFiles;
+	size_t i = 0;
+	struct stat fileInfo;
+
+	glob(files, GLOB_MARK, NULL, &testFiles);
+
+	for(i = 0; i < testFiles.gl_pathc; i++) {
+		testFile = testFiles.gl_pathv[i];
+
+		if(stat((char*) testFile, &fileInfo) != 0) 
+			continue; /* continue with the next file if we can't stat() the file */
+
+		++iTests;
+		/* all regular files are run through the test logic. Symlinks don't work. */
+		if(S_ISREG(fileInfo.st_mode)) { /* config file */
+			printf("processing test case '%s' ... ", testFile);
+			ret = processTestFile(fd, testFile);
+			if(ret == 0) {
+				printf("successfully completed\n");
+			} else {
+				printf("failed!\n");
+				++iFailed;
+			}
+		}
+	}
+	globfree(&testFiles);
+
+	if(iTests == 0) {
+		printf("Error: no test cases found, no tests executed.\n");
+		iFailed = 1;
+	} else {
+		printf("Number of tests run: %d, number of failures: %d\n", iTests, iFailed);
+	}
+
+	return(iFailed);
+}
+
+
+/* Run the test suite. This must be called with exactly one parameter, the
+ * name of the test suite. For details, see file header comment at the top
+ * of this file.
+ * rgerhards, 2009-04-03
+ */
+int main(int argc, char *argv[])
+{
+	int fd;
+	pid_t pid;
+	int status;
+	int ret = 0;
+	char buf[4096];
+	char testcases[4096];
+
+	if(argc != 2) {
+		printf("Invalid call of udptester\n");
+		printf("Usage: udptester testsuite-name\n");
+		exit(1);
+	}
+
+	testSuite = argv[1];
+
+	if((srcdir = getenv("srcdir")) == NULL)
+		srcdir = ".";
+
+	printf("Start of udptester run ($srcdir=%s, testsuite=%s)\n", srcdir, testSuite);
+
+	openPipe(argv[1], &pid, &fd);
+	readLine(fd, buf);
+
+	/* generate filename */
+	sprintf(testcases, "%s/testsuites/*.%s", srcdir, testSuite);
+	if(doTests(fd, testcases) != 0)
+		ret = 1;
+
+	/* cleanup */
+	kill(pid, SIGTERM);
+	waitpid(pid, &status, 0);	/* wait until instance terminates */
+	printf("End of udptester run.\n");
+	exit(ret);
+}
diff --git a/tests/validation-run.sh b/tests/validation-run.sh
new file mode 100755
index 0000000..1098129
--- /dev/null
+++ b/tests/validation-run.sh
@@ -0,0 +1,38 @@
+# check if the configuration test run detects invalid config files.
+#
+# Part of the testbench for rsyslog.
+#
+# Copyright 2009 Rainer Gerhards and Adiscon GmbH.
+#
+# This file is part of rsyslog.
+#
+# Rsyslog is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# Rsyslog is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with Rsyslog.  If not, see <http://www.gnu.org/licenses/>.
+#
+# A copy of the GPL can be found in the file "COPYING" in this distribution.
+#set -x
+echo "testing a failed configuration verification run"
+../tools/rsyslogd -u2 -c3 -N1 -f$srcdir/testsuites/invalid.conf
+if [ $? -ne 1 ]; then
+   exit 1
+fi
+echo testing a valid config verification run
+../tools/rsyslogd -u2 -c3 -N1 -f$srcdir/testsuites/valid.conf
+if [ $? -ne 0 ]; then
+   exit 1
+fi
+echo testing empty config file
+../tools/rsyslogd -u2 -c3 -N1 -f/dev/null
+if [ $? -ne 1 ]; then
+   exit 1
+fi