diff options
Diffstat (limited to 'config.h.in')
| -rw-r--r-- | config.h.in | 466 |
1 files changed, 466 insertions, 0 deletions
diff --git a/config.h.in b/config.h.in new file mode 100644 index 0000000..2d79d57 --- /dev/null +++ b/config.h.in @@ -0,0 +1,466 @@ +/* Copyright (c) 1993 + * Juergen Weigert (jnweiger@immd4.informatik.uni-erlangen.de) + * Michael Schroeder (mlschroe@immd4.informatik.uni-erlangen.de) + * Copyright (c) 1987 Oliver Laumann + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program (see the file COPYING); if not, write to the + * Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + **************************************************************** + * $Id: config.h.in,v 1.12 1994/05/31 12:31:36 mlschroe Exp $ FAU + */ + + + + + +/********************************************************************** + * + * User Configuration Section + */ + + + +/* + * Define SOCKDIR to be the directory to contain the named sockets + * screen creates. This should be in a common subdirectory, such as + * /usr/local or /tmp. It makes things a little more secure if you + * choose a directory which is not writable by everyone or where the + * "sticky" bit is on, but this isn't required. + * If SOCKDIR is not defined screen will put the named sockets in + * the user's home directory. Notice that this can cause you problems + * if some user's HOME directories are NFS-mounted and don't support + * named sockets. + * Screen will name the subdirectories "S-$USER" (e.g /tmp/S-davison). + * Do not define TMPTEST unless it's for debugging purpose. + */ + +#ifndef TMPTEST +# define SOCKDIR "/tmp/screens" +#else +# define SOCKDIR "/tmp/testscreens" +#endif + +/* + * Screen sources two startup files. First a global file with a path + * specified here, second your local $HOME/.screenrc + * Don't define this, if you don't want it. + */ +#ifndef ETCSCREENRC +# define ETCSCREENRC "/usr/local/etc/screenrc" +#endif + +/* + * Screen can look for the environment variable $SYSSCREENRC and -if it + * exists- load the file specified in that variable as global screenrc. + * If you want to enable this feature, define ALLOW_SYSSCREENRC to one (1). + * Otherwise ETCSCREENRC is always loaded. + */ +#define ALLOW_SYSSCREENRC 1 + +/* + * define PTYMODE if you do not like the default of 0622, which allows + * public write to your pty. + * define PTYGROUP to some numerical group-id if you do not want the + * tty to be in "your" group. + * Note, screen is unable to change mode or group of the pty if it + * is not installed with sufficient privilege. (e.g. set-uid-root) + */ +#undef PTYMODE +#undef PTYGROUP + +/* + * If screen is NOT installed set-uid root, screen can provide tty + * security by exclusively locking the ptys. While this keeps other + * users from opening your ptys, it also keeps your own subprocesses + * from being able to open /dev/tty. Define LOCKPTY to add this + * exclusive locking. + */ +#undef LOCKPTY + +/* + * If you'd rather see the status line on the first line of your + * terminal rather than the last, define TOPSTAT. + */ +#undef TOPSTAT + +/* + * here come the erlangen extensions to screen: + * define LOCK if you want to use a lock program for a screenlock. + * define PASSWORD for secure reattach of your screen. + * define COPY_PASTE to use the famous hacker's treasure zoo. + * define POW_DETACH to have a detach_and_logout key. + * define REMOTE_DETACH (-d option) to move screen between terminals. + * define AUTO_NUKE to enable Tim MacKenzies clear screen nuking + * define PSEUDOS to allow window input/output filtering + * define MULTI to allow multiple attaches. + * define MULTIUSER to allow other users attach to your session + * (if they are in the acl, of course) + * (jw) + */ +#undef SIMPLESCREEN +#ifndef SIMPLESCREEN +# define LOCK +# define PASSWORD +# define COPY_PASTE +# define REMOTE_DETACH +# define POW_DETACH +# define AUTO_NUKE +# define PSEUDOS +# define MULTI +# define MULTIUSER +# define MAPKEYS +# define COLOR +#endif /* SIMPLESCREEN */ +#define KANJI + +/* + * As error messages are mostly meaningless to the user, we + * try to throw out phrases that are somewhat more familiar + * to ...well, at least familiar to us NetHack players. + */ +#ifndef NONETHACK +# define NETHACK +#endif /* NONETHACK */ + +/* + * If screen is installed with permissions to update /etc/utmp (such + * as if it is installed set-uid root), define UTMPOK. + */ +#define UTMPOK + +/* Set LOGINDEFAULT to one (1) + * if you want entries added to /etc/utmp by default, else set it to + * zero (0). + * LOGINDEFAULT will be one (1) whenever LOGOUTOK is undefined! + */ +#define LOGINDEFAULT 1 + +/* Set LOGOUTOK to one (1) + * if you want the user to be able to log her/his windows out. + * (Meaning: They are there, but not visible in /etc/utmp). + * Disabling this feature only makes sense if you have a secure /etc/utmp + * database. + * Negative examples: suns usually have a world writable utmp file, + * xterm and script will run perfectly without s-bit. + * If LOGOUTOK is undefined and UTMPOK is defined, all windows are initially + * and permanently logged in. + */ +#define LOGOUTOK 1 + + +/* + * If UTMPOK is defined and your system (incorrectly) counts logins by + * counting non-null entries in /etc/utmp (instead of counting non-null + * entries with no hostname that are not on a pseudo tty), define USRLIMIT + * to have screen put an upper-limit on the number of entries to write + * into /etc/utmp. This helps to keep you from exceeding a limited-user + * license. + */ +#undef USRLIMIT + + +/* + * Some terminals, e.g. Wyse 120, use a bitfield to select attributes. + * This doesn't work with the standard so/ul/m? terminal entries, + * because they will cancel each other out. + * On TERMINFO machines, "sa" (sgr) may work. If you want screen + * to switch attributes only with sgr, define USE_SGR. + * This is *not* recomended, do this only if you must. + */ +#undef USE_SGR + + +/********************************************************************** + * + * End of User Configuration Section + * + * Rest of this file is modified by 'configure' + * Change at your own risk! + * + */ + +/* + * Some defines to identify special unix variants + */ +#ifndef SVR4 +#undef SVR4 +#endif + +/* #ifndef __osf__ */ +#ifndef MIPS +#undef MIPS +#endif +/* #endif */ + +#ifndef OSX +#undef OSX +#endif + +#ifndef ISC +#undef ISC +#endif + +#ifndef sysV68 +#undef sysV68 +#endif + +#ifndef _POSIX_SOURCE +#undef _POSIX_SOURCE +#endif + +/* + * Define POSIX if your system supports IEEE Std 1003.1-1988 (POSIX). + */ +#undef POSIX + +/* + * Define BSDJOBS if you have BSD-style job control (both process + * groups and a tty that deals correctly with them). + */ +#undef BSDJOBS + +/* + * Define TERMIO if you have struct termio instead of struct sgttyb. + * This is usually the case for SVID systems, where BSD uses sgttyb. + * POSIX systems should define this anyway, even though they use + * struct termios. + */ +#undef TERMIO + +/* + * Define CYTERMIO if you have cyrillic termio modes. + */ +#undef CYTERMIO + +/* + * Define TERMINFO if your machine emulates the termcap routines + * with the terminfo database. + * Thus the .screenrc file is parsed for + * the command 'terminfo' and not 'termcap'. + */ +#undef TERMINFO + +/* + * If your library does not define ospeed, define this. + */ +#undef NEED_OSPEED + +/* + * Define SYSV if your machine is SYSV complient (Sys V, HPUX, A/UX) + */ +#ifndef SYSV +#undef SYSV +#endif + +/* + * Define SIGVOID if your signal handlers return void. On older + * systems, signal returns int, but on newer ones, it returns void. + */ +#undef SIGVOID + +/* + * Define USESIGSET if you have sigset for BSD 4.1 reliable signals. + */ +#undef USESIGSET + +/* + * Define SYSVSIGS if signal handlers must be reinstalled after + * they have been called. + */ +#undef SYSVSIGS + +/* + * Define BSDWAIT if your system defines a 'union wait' in <sys/wait.h> + * + * Only allow BSDWAIT i.e. wait3 on nonposix systems, since + * posix implies wait(3) and waitpid(3). vdlinden@fwi.uva.nl + * + */ +#ifndef POSIX +#undef BSDWAIT +#endif + +/* + * On RISCOS we prefer wait2() over wait3(). rouilj@sni-usa.com + */ +#ifdef BSDWAIT +#undef USE_WAIT2 +#endif + +/* + * Define DIRENT if your system has <dirent.h> instead of <sys/dir.h> + */ +#undef DIRENT + +/* + * If your system has getutent(), pututline(), etc. to write to the + * utmp file, define GETUTENT. + */ +#undef GETUTENT + +/* + * Define UTHOST if the utmp file has a host field. + */ +#undef UTHOST + +/* + * If ttyslot() breaks getlogin() by returning indexes to utmp entries + * of type DEAD_PROCESS, then our getlogin() replacement should be + * selected by defining BUGGYGETLOGIN. + */ +#undef BUGGYGETLOGIN + +/* + * If your system has the calls setreuid() and setregid(), + * define HAVE_SETREUID. Otherwise screen will use a forked process to + * safely create output files without retaining any special privileges. + * (Output logging will be disabled, however.) + */ +#undef HAVE_SETREUID + +/* + * If your system supports BSD4.4's seteuid() and setegid(), define + * HAVE_SETEUID. + */ +#undef HAVE_SETEUID + +/* + * If you want the "time" command to display the current load average + * define LOADAV. Maybe you must install screen with the needed + * privileges to read /dev/kmem. + * Note that NLIST_ stuff is only checked, when getloadavg() is not available. + */ +#undef LOADAV + +#undef LOADAV_NUM +#undef LOADAV_TYPE +#undef LOADAV_SCALE +#undef LOADAV_GETLOADAVG +#undef LOADAV_UNIX +#undef LOADAV_AVENRUN + +#undef NLIST_DECLARED +#undef NLIST_STRUCT +#undef NLIST_NAME_UNION + +/* + * If your system has the new format /etc/ttys (like 4.3 BSD) and the + * getttyent(3) library functions, define GETTTYENT. + */ +#undef GETTTYENT + +/* + * Define USEBCOPY if the bcopy/memcpy from your system's C library + * supports the overlapping of source and destination blocks. When + * undefined, screen uses its own (probably slower) version of bcopy(). + * + * SYSV machines may have a working memcpy() -- Oh, this is + * quite unlikely. Tell me if you see one. (Juergen) + * But then, memmove() should work, if at all available. + */ +#undef USEBCOPY +#undef USEMEMCPY +#undef USEMEMMOVE + +/* + * If your system has vsprintf() and requires the use of the macros in + * "varargs.h" to use functions with variable arguments, + * define USEVARARGS. + */ +#undef USEVARARGS + +/* + * If your system has strerror() define this. + */ +#undef HAVE_STRERROR + +/* + * If the select return value doesn't treat a descriptor that is + * usable for reading and writing as two hits, define SELECT_BROKEN. + */ +#undef SELECT_BROKEN + +/* + * Define this if your system supports named pipes. + */ +#undef NAMEDPIPE + +/* + * Define this if your system exits select() immediatly if a pipe is + * opened read-only and no writer has opened it. + */ +#undef BROKEN_PIPE + +/* + * Define this if the unix-domain socket implementation doesn't + * create a socket in the filesystem. + */ +#undef SOCK_NOT_IN_FS + +/* + * If your system has setenv() and unsetenv() define USESETENV + */ +#undef USESETENV + +/* + * If your system does not come with a setenv()/putenv()/getenv() + * functions, you may bring in our own code by defining NEEDPUTENV. + */ +#undef NEEDPUTENV + +/* + * If the passwords are stored in a shadow file and you want the + * builtin lock to work properly, define SHADOWPW. + */ +#undef SHADOWPW + +/* + * If you are on a SYS V machine that restricts filename length to 14 + * characters, you may need to enforce that by setting NAME_MAX to 14 + */ +#undef NAME_MAX /* KEEP_UNDEF_HERE override system value */ +#undef NAME_MAX + +/* + * define NEED_RENAME if your system doesn't have a rename() function + */ +#undef NEED_RENAME + +/* + * define HAVE__EXIT if your system has the _exit() call. + */ +#undef HAVE__EXIT + +/* + * define HAVE_LSTAT if your system has symlinks and the lstat() call. + */ +#undef HAVE_LSTAT + +/* + * define HAVE_DEV_PTC if you have a /dev/ptc character special + * device. + */ +#undef HAVE_DEV_PTC + +/* + * define PTYRANGE0 and or PTYRANGE1 if you want to adapt screen + * to unusual environments. E.g. For SunOs the defaults are "qpr" and + * "0123456789abcdef". For SunOs 4.1.2 + * #define PTYRANGE0 "pqrstuvwxyzPQRST" + * is recommended by Dan Jacobson. + */ +#undef PTYRANGE0 +#undef PTYRANGE1 + |