Create partitions


Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Device does not contain a recognized partition table


The device presents a logical sector size that is smaller than
the physical sector size. Aligning to a physical sector (or optimal
I/O) size boundary is recommended, or performance may be impacted.

Command (m for help): Partition type:
   p   primary (0 primary, 0 extended, 4 free)
   e   extended
Select (default p): Partition number (1-4, default 1): First sector (7-102399, default 7): Using default value 7
Last sector, +sectors or +size{K,M,G} (7-102399, default 102399): Partition 1 of type Linux and of size 10 MiB is set

Command (m for help): Partition type:
   p   primary (1 primary, 0 extended, 3 free)
   e   extended
Select (default p): Partition number (1-4, default 2): First sector (20487-102399, default 20487): Using default value 20487
Last sector, +sectors or +size{K,M,G} (20487-102399, default 102399): Partition 2 of type Linux and of size 10 MiB is set

Command (m for help): Partition type:
   p   primary (2 primary, 0 extended, 2 free)
   e   extended
Select (default p): Partition number (1-4, default 3): First sector (40967-102399, default 40967): Using default value 40967
Last sector, +sectors or +size{K,M,G} (40967-102399, default 102399): Partition 3 of type Linux and of size 10 MiB is set

Command (m for help): Partition type:
   p   primary (3 primary, 0 extended, 1 free)
   e   extended
Select (default e): Selected partition 4
First sector (61447-102399, default 61447): Using default value 61447
Last sector, +sectors or +size{K,M,G} (61447-102399, default 102399): Using default value 102399
Partition 4 of type Extended and of size 20 MiB is set

Command (m for help): All primary partitions are in use
Adding logical partition 5
First sector (61454-102399, default 63487): Using default value 63487
Last sector, +sectors or +size{K,M,G} (63487-102399, default 102399): Partition 5 of type Linux and of size 5 MiB is set

Command (m for help): All primary partitions are in use
Adding logical partition 6
First sector (61454-102399, default 75775): Using default value 75775
Last sector, +sectors or +size{K,M,G} (75775-102399, default 102399): Partition 6 of type Linux and of size 5 MiB is set

Command (m for help): All primary partitions are in use
Adding logical partition 7
First sector (61454-102399, default 88063): Using default value 88063
Last sector, +sectors or +size{K,M,G} (88063-102399, default 102399): Using default value 102399
Partition 7 of type Linux and of size 7 MiB is set

Command (m for help): 
Disk /dev/...: 52 MB, 52428800 bytes, 102400 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 32768 bytes
Alignment offset: 3584 bytes


   Device Boot      Start         End      Blocks   Id  System
/dev/...1               7       20486       10240   83  Linux
/dev/...2           20487       40966       10240   83  Linux
/dev/...3           40967       61446       10240   83  Linux
/dev/...4           61447      102399       20476+   5  Extended
/dev/...5           63487       73726        5120   83  Linux
/dev/...6           75775       86014        5120   83  Linux
/dev/...7           88063      102399        7168+  83  Linux

Command (m for help): The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.
Alignment offsets:
0
0
0
0
0
0
0