Create partitions


Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Device does not contain a recognized partition table


The device presents a logical sector size that is smaller than
the physical sector size. Aligning to a physical sector (or optimal
I/O) size boundary is recommended, or performance may be impacted.

Command (m for help): Partition type:
   p   primary (0 primary, 0 extended, 4 free)
   e   extended
Select (default p): Partition number (1-4, default 1): First sector (2048-102399, default 2048): Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-102399, default 102399): Partition 1 of type Linux and of size 20 MiB is set

Command (m for help): Partition type:
   p   primary (1 primary, 0 extended, 3 free)
   e   extended
Select (default p): Partition number (1-4, default 2): First sector (43008-102399, default 43008): Using default value 43008
Last sector, +sectors or +size{K,M,G} (43008-102399, default 102399): Using default value 102399
Partition 2 of type Linux and of size 29 MiB is set

Command (m for help): 
Disk /dev/...: 52 MB, 52428800 bytes, 102400 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 32768 bytes


   Device Boot      Start         End      Blocks   Id  System
/dev/...1            2048       43007       20480   83  Linux
/dev/...2           43008      102399       29696   83  Linux

Command (m for help): The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.
Alignment offsets:
0
0
Create partitions (MD)


Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Device does not contain a recognized partition table


The device presents a logical sector size that is smaller than
the physical sector size. Aligning to a physical sector (or optimal
I/O) size boundary is recommended, or performance may be impacted.

Command (m for help): Partition type:
   p   primary (0 primary, 0 extended, 4 free)
   e   extended
Select (default p): Partition number (1-4, default 1): First sector (2048-100095, default 2048): Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-100095, default 100095): Partition 1 of type Linux and of size 10 MiB is set

Command (m for help): Partition type:
   p   primary (1 primary, 0 extended, 3 free)
   e   extended
Select (default p): Partition number (1-4, default 2): First sector (22528-100095, default 22528): Using default value 22528
Last sector, +sectors or +size{K,M,G} (22528-100095, default 100095): Partition 2 of type Linux and of size 10 MiB is set

Command (m for help): 
Disk /dev/md8: 51 MB, 51249152 bytes, 100096 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 65536 bytes / 131072 bytes


    Device Boot      Start         End      Blocks   Id  System
/dev/md8p1            2048       22527       10240   83  Linux
/dev/md8p2           22528       43007       10240   83  Linux

Command (m for help): The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.
Alignment offsets (MD):
0
0