Create partitions


Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.

Device does not contain a recognized partition table


Command (m for help): Partition type:
   p   primary (0 primary, 0 extended, 4 free)
   e   extended
Select (default p): Partition number (1-4, default 1): First sector (2048-102399, default 2048): Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-102399, default 102399): Partition 1 of type Linux and of size 10 MiB is set

Command (m for help): Partition type:
   p   primary (1 primary, 0 extended, 3 free)
   e   extended
Select (default p): Partition number (1-4, default 2): First sector (22528-102399, default 22528): Using default value 22528
Last sector, +sectors or +size{K,M,G} (22528-102399, default 102399): Partition 2 of type Linux and of size 10 MiB is set

Command (m for help): Partition type:
   p   primary (2 primary, 0 extended, 2 free)
   e   extended
Select (default p): Partition number (1-4, default 3): First sector (43008-102399, default 43008): Using default value 43008
Last sector, +sectors or +size{K,M,G} (43008-102399, default 102399): Partition 3 of type Linux and of size 10 MiB is set

Command (m for help): Partition type:
   p   primary (3 primary, 0 extended, 1 free)
   e   extended
Select (default e): Selected partition 4
First sector (63488-102399, default 63488): Using default value 63488
Last sector, +sectors or +size{K,M,G} (63488-102399, default 102399): Using default value 102399
Partition 4 of type Extended and of size 19 MiB is set

Command (m for help): All primary partitions are in use
Adding logical partition 5
First sector (65536-102399, default 65536): Using default value 65536
Last sector, +sectors or +size{K,M,G} (65536-102399, default 102399): Partition 5 of type Linux and of size 5 MiB is set

Command (m for help): All primary partitions are in use
Adding logical partition 6
First sector (77824-102399, default 77824): Using default value 77824
Last sector, +sectors or +size{K,M,G} (77824-102399, default 102399): Partition 6 of type Linux and of size 5 MiB is set

Command (m for help): All primary partitions are in use
Adding logical partition 7
First sector (90112-102399, default 90112): Using default value 90112
Last sector, +sectors or +size{K,M,G} (90112-102399, default 102399): Using default value 102399
Partition 7 of type Linux and of size 6 MiB is set

Command (m for help): 
Disk /dev/...: 52 MB, 52428800 bytes, 102400 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 32768 bytes


   Device Boot      Start         End      Blocks   Id  System
/dev/...1            2048       22527       10240   83  Linux
/dev/...2           22528       43007       10240   83  Linux
/dev/...3           43008       63487       10240   83  Linux
/dev/...4           63488      102399       19456    5  Extended
/dev/...5           65536       75775        5120   83  Linux
/dev/...6           77824       88063        5120   83  Linux
/dev/...7           90112      102399        6144   83  Linux

Command (m for help): The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.
Alignment offsets:
0
0
0
0
0
0
0