Imported Upstream version 1.7.10upstream/1.7.10

6 files changed, 1158 insertions, 379 deletions

diff --git a/test/Makefile.am b/test/Makefile.am
index 870ce321..426a72e0 100644
--- a/test/Makefile.am
+++ b/test/Makefile.am
@@ -149,11 +149,13 @@ endif DBUS_WITH_GLIB
 
 installcheck_tests =
 installcheck_environment = \
+	XDG_RUNTIME_DIR=@abs_top_builddir@/test/XDG_RUNTIME_DIR \
 	DBUS_TEST_DAEMON=$(DESTDIR)$(DBUS_DAEMONDIR)/dbus-daemon$(EXEEXT) \
 	DBUS_TEST_HOMEDIR=@abs_top_builddir@/dbus \
 	DBUS_TEST_SYSCONFDIR=$(DESTDIR)$(sysconfdir)
 
 TESTS_ENVIRONMENT = \
+	XDG_RUNTIME_DIR=@abs_top_builddir@/test/XDG_RUNTIME_DIR \
 	DBUS_BLOCK_ON_ABORT=1 \
 	DBUS_FATAL_WARNINGS=1 \
 	DBUS_TEST_DAEMON=@abs_top_builddir@/bus/dbus-daemon$(EXEEXT) \
@@ -368,7 +370,7 @@ imported_data = \
 	$(NULL)
 
 noinst_DATA = $(imported_data)
-CLEANFILES = $(noinst_DATA)
+CLEANFILES = $(noinst_DATA) XDG_RUNTIME_DIR
 
 $(imported_data): data/valid-config-files/%.conf: $(top_builddir)/bus/%.conf
 	$(AM_V_at)$(MKDIR_P) data/valid-config-files
diff --git a/test/Makefile.in b/test/Makefile.in
index 90ebd74d..f7881f27 100644
--- a/test/Makefile.in
+++ b/test/Makefile.in
@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -18,23 +17,51 @@
 
 
 VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
     esac; \
-    test $$am__dry = yes; \
-  }
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -88,7 +115,8 @@ testexec_PROGRAMS = $(am__EXEEXT_7)
 @DBUS_ENABLE_INSTALLED_TESTS_TRUE@@DBUS_ENABLE_MODULAR_TESTS_TRUE@am__append_7 = $(installable_tests) $(installable_manual_tests)
 @DBUS_ENABLE_INSTALLED_TESTS_FALSE@@DBUS_ENABLE_MODULAR_TESTS_TRUE@am__append_8 = $(installable_tests) $(installable_manual_tests)
 subdir = test
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(top_srcdir)/depcomp $(top_srcdir)/test-driver
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/as-ac-expand.m4 \
 	$(top_srcdir)/m4/compiler.m4 $(top_srcdir)/m4/libtool.m4 \
@@ -113,6 +141,7 @@ libdbus_testutils_internal_la_OBJECTS =  \
 AM_V_lt = $(am__v_lt_@AM_V@)
 am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
 am__v_lt_0 = --silent
+am__v_lt_1 = 
 am__DEPENDENCIES_1 =
 @DBUS_WITH_DBUS_GLIB_TRUE@libdbus_testutils_la_DEPENDENCIES =  \
 @DBUS_WITH_DBUS_GLIB_TRUE@	$(top_builddir)/dbus/libdbus-1.la \
@@ -217,6 +246,18 @@ am_test_syslog_OBJECTS = test_syslog-syslog.$(OBJEXT)
 test_syslog_OBJECTS = $(am_test_syslog_OBJECTS)
 test_syslog_DEPENDENCIES = libdbus-testutils-internal.la \
 	$(am__DEPENDENCIES_1)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
@@ -229,20 +270,16 @@ LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 	$(AM_CFLAGS) $(CFLAGS)
 AM_V_CC = $(am__v_CC_@AM_V@)
 am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
-am__v_CC_0 = @echo "  CC    " $@;
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
 CCLD = $(CC)
 LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
 	$(AM_LDFLAGS) $(LDFLAGS) -o $@
 AM_V_CCLD = $(am__v_CCLD_@AM_V@)
 am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
-am__v_CCLD_0 = @echo "  CCLD  " $@;
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN   " $@;
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
 SOURCES = $(libdbus_testutils_internal_la_SOURCES) \
 	$(libdbus_testutils_la_SOURCES) $(manual_authz_SOURCES) \
 	shell-test.c spawn-test.c $(test_corrupt_SOURCES) \
@@ -263,13 +300,14 @@ DIST_SOURCES = $(libdbus_testutils_internal_la_SOURCES) \
 	$(test_relay_SOURCES) test-segfault.c test-service.c \
 	test-shell-service.c test-sleep-forever.c \
 	$(test_syntax_SOURCES) $(test_syslog_SOURCES)
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-	html-recursive info-recursive install-data-recursive \
-	install-dvi-recursive install-exec-recursive \
-	install-html-recursive install-info-recursive \
-	install-pdf-recursive install-ps-recursive install-recursive \
-	installcheck-recursive installdirs-recursive pdf-recursive \
-	ps-recursive uninstall-recursive
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
 am__can_run_installinfo = \
   case $$AM_UPDATE_INFO_DIR in \
     n|no|NO) false;; \
@@ -278,14 +316,235 @@ am__can_run_installinfo = \
 DATA = $(noinst_DATA)
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
-	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
-	distdir
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	check recheck distdir
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
-am__tty_colors = \
-red=; grn=; lgn=; blu=; std=
+am__tty_colors_dummy = \
+  mgn= red= grn= lgn= blu= brg= std=; \
+  am__color_tests=no
+am__tty_colors = { \
+  $(am__tty_colors_dummy); \
+  if test "X$(AM_COLOR_TESTS)" = Xno; then \
+    am__color_tests=no; \
+  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+    am__color_tests=yes; \
+  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+    am__color_tests=yes; \
+  fi; \
+  if test $$am__color_tests = yes; then \
+    red=''; \
+    grn=''; \
+    lgn=''; \
+    blu=''; \
+    mgn=''; \
+    brg=''; \
+    std=''; \
+  fi; \
+}
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__recheck_rx = ^[ 	]*:recheck:[ 	]*
+am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
+am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+  recheck = 1; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+        { \
+          if ((getline line2 < ($$0 ".log")) < 0) \
+	    recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+        { \
+          recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+        { \
+          break; \
+        } \
+    }; \
+  if (recheck) \
+    print $$0; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+  print "fatal: making $@: " msg | "cat >&2"; \
+  exit 1; \
+} \
+function rst_section(header) \
+{ \
+  print header; \
+  len = length(header); \
+  for (i = 1; i <= len; i = i + 1) \
+    printf "="; \
+  printf "\n\n"; \
+} \
+{ \
+  copy_in_global_log = 1; \
+  global_test_result = "RUN"; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+         fatal("failed to read from " $$0 ".trs"); \
+      if (line ~ /$(am__global_test_result_rx)/) \
+        { \
+          sub("$(am__global_test_result_rx)", "", line); \
+          sub("[ 	]*$$", "", line); \
+          global_test_result = line; \
+        } \
+      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+        copy_in_global_log = 0; \
+    }; \
+  if (copy_in_global_log) \
+    { \
+      rst_section(global_test_result ": " $$0); \
+      while ((rc = (getline line < ($$0 ".log"))) != 0) \
+      { \
+        if (rc < 0) \
+          fatal("failed to read from " $$0 ".log"); \
+        print line; \
+      }; \
+      printf "\n"; \
+    }; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+  --color-tests "$$am__color_tests" \
+  --enable-hard-errors "$$am__enable_hard_errors" \
+  --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test.  Creates the
+# directory for the log if needed.  Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log.  Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup);					\
+$(am__vpath_adj_setup) $(am__vpath_adj)			\
+$(am__tty_colors);					\
+srcdir=$(srcdir); export srcdir;			\
+case "$@" in						\
+  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
+    *) am__odir=.;; 					\
+esac;							\
+test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
+  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
+if test -f "./$$f"; then dir=./;			\
+elif test -f "$$f"; then dir=;				\
+else dir="$(srcdir)/"; fi;				\
+tst=$$dir$$f; log='$@'; 				\
+if test -n '$(DISABLE_HARD_ERRORS)'; then		\
+  am__enable_hard_errors=no; 				\
+else							\
+  am__enable_hard_errors=yes; 				\
+fi; 							\
+case " $(XFAIL_TESTS) " in				\
+  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
+    am__expect_failure=yes;;				\
+  *)							\
+    am__expect_failure=no;;				\
+esac; 							\
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed).  The result is saved in the shell variable
+# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+  bases='$(TEST_LOGS)'; \
+  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+  bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
 @DBUS_ENABLE_MODULAR_TESTS_TRUE@am__EXEEXT_8 = $(am__EXEEXT_3)
+TEST_SUITE_LOG = test-suite.log
+TEST_EXTENSIONS = @EXEEXT@ .test
+LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
+LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
+am__set_b = \
+  case '$@' in \
+    */*) \
+      case '$*' in \
+        */*) b='$*';; \
+          *) b=`echo '$@' | sed 's/\.log$$//'`; \
+       esac;; \
+    *) \
+      b='$*';; \
+  esac
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.test.log=.log)
+TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
+TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
+	$(TEST_LOG_FLAGS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 am__relativize = \
   dir0=`pwd`; \
@@ -605,11 +864,13 @@ installable_tests = shell-test test-printf $(NULL) $(am__append_3)
 installable_manual_tests = $(NULL) $(am__append_4)
 installcheck_tests = $(am__append_6)
 installcheck_environment = \
+	XDG_RUNTIME_DIR=@abs_top_builddir@/test/XDG_RUNTIME_DIR \
 	DBUS_TEST_DAEMON=$(DESTDIR)$(DBUS_DAEMONDIR)/dbus-daemon$(EXEEXT) \
 	DBUS_TEST_HOMEDIR=@abs_top_builddir@/dbus \
 	DBUS_TEST_SYSCONFDIR=$(DESTDIR)$(sysconfdir)
 
 TESTS_ENVIRONMENT = \
+	XDG_RUNTIME_DIR=@abs_top_builddir@/test/XDG_RUNTIME_DIR \
 	DBUS_BLOCK_ON_ABORT=1 \
 	DBUS_FATAL_WARNINGS=1 \
 	DBUS_TEST_DAEMON=@abs_top_builddir@/bus/dbus-daemon$(EXEEXT) \
@@ -771,11 +1032,11 @@ imported_data = \
 	$(NULL)
 
 noinst_DATA = $(imported_data)
-CLEANFILES = $(noinst_DATA)
+CLEANFILES = $(noinst_DATA) XDG_RUNTIME_DIR
 all: all-recursive
 
 .SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
+.SUFFIXES: .c .lo .log .o .obj .test .test$(EXEEXT) .trs
 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
@@ -809,14 +1070,18 @@ $(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
-	@list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
-	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
-	  test "$$dir" != "$$p" || dir=.; \
-	  echo "rm -f \"$${dir}/so_locations\""; \
-	  rm -f "$${dir}/so_locations"; \
-	done
+	@list='$(noinst_LTLIBRARIES)'; \
+	locs=`for p in $$list; do echo $$p; done | \
+	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
+	      sort -u`; \
+	test -z "$$locs" || { \
+	  echo rm -f $${locs}; \
+	  rm -f $${locs}; \
+	}
+
 libdbus-testutils-internal.la: $(libdbus_testutils_internal_la_OBJECTS) $(libdbus_testutils_internal_la_DEPENDENCIES) $(EXTRA_libdbus_testutils_internal_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(LINK)  $(libdbus_testutils_internal_la_OBJECTS) $(libdbus_testutils_internal_la_LIBADD) $(LIBS)
+
 libdbus-testutils.la: $(libdbus_testutils_la_OBJECTS) $(libdbus_testutils_la_DEPENDENCIES) $(EXTRA_libdbus_testutils_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(LINK) $(am_libdbus_testutils_la_rpath) $(libdbus_testutils_la_OBJECTS) $(libdbus_testutils_la_LIBADD) $(LIBS)
 
@@ -837,10 +1102,12 @@ install-testexecPROGRAMS: $(testexec_PROGRAMS)
 	fi; \
 	for p in $$list; do echo "$$p $$p"; done | \
 	sed 's/$(EXEEXT)$$//' | \
-	while read p p1; do if test -f $$p || test -f $$p1; \
-	  then echo "$$p"; echo "$$p"; else :; fi; \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
 	done | \
-	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
 	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
 	sed 'N;N;N;s,\n, ,g' | \
 	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
@@ -861,7 +1128,8 @@ uninstall-testexecPROGRAMS:
 	@list='$(testexec_PROGRAMS)'; test -n "$(testexecdir)" || list=; \
 	files=`for p in $$list; do echo "$$p"; done | \
 	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-	      -e 's/$$/$(EXEEXT)/' `; \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
 	test -n "$$list" || exit 0; \
 	echo " ( cd '$(DESTDIR)$(testexecdir)' && rm -f" $$files ")"; \
 	cd "$(DESTDIR)$(testexecdir)" && rm -f $$files
@@ -874,60 +1142,79 @@ clean-testexecPROGRAMS:
 	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
 	echo " rm -f" $$list; \
 	rm -f $$list
+
 manual-authz$(EXEEXT): $(manual_authz_OBJECTS) $(manual_authz_DEPENDENCIES) $(EXTRA_manual_authz_DEPENDENCIES) 
 	@rm -f manual-authz$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(manual_authz_OBJECTS) $(manual_authz_LDADD) $(LIBS)
+
 shell-test$(EXEEXT): $(shell_test_OBJECTS) $(shell_test_DEPENDENCIES) $(EXTRA_shell_test_DEPENDENCIES) 
 	@rm -f shell-test$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(shell_test_OBJECTS) $(shell_test_LDADD) $(LIBS)
+
 spawn-test$(EXEEXT): $(spawn_test_OBJECTS) $(spawn_test_DEPENDENCIES) $(EXTRA_spawn_test_DEPENDENCIES) 
 	@rm -f spawn-test$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(spawn_test_OBJECTS) $(spawn_test_LDADD) $(LIBS)
+
 test-corrupt$(EXEEXT): $(test_corrupt_OBJECTS) $(test_corrupt_DEPENDENCIES) $(EXTRA_test_corrupt_DEPENDENCIES) 
 	@rm -f test-corrupt$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(test_corrupt_OBJECTS) $(test_corrupt_LDADD) $(LIBS)
+
 test-dbus-daemon$(EXEEXT): $(test_dbus_daemon_OBJECTS) $(test_dbus_daemon_DEPENDENCIES) $(EXTRA_test_dbus_daemon_DEPENDENCIES) 
 	@rm -f test-dbus-daemon$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(test_dbus_daemon_OBJECTS) $(test_dbus_daemon_LDADD) $(LIBS)
+
 test-dbus-daemon-eavesdrop$(EXEEXT): $(test_dbus_daemon_eavesdrop_OBJECTS) $(test_dbus_daemon_eavesdrop_DEPENDENCIES) $(EXTRA_test_dbus_daemon_eavesdrop_DEPENDENCIES) 
 	@rm -f test-dbus-daemon-eavesdrop$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(test_dbus_daemon_eavesdrop_OBJECTS) $(test_dbus_daemon_eavesdrop_LDADD) $(LIBS)
+
 test-exit$(EXEEXT): $(test_exit_OBJECTS) $(test_exit_DEPENDENCIES) $(EXTRA_test_exit_DEPENDENCIES) 
 	@rm -f test-exit$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(test_exit_OBJECTS) $(test_exit_LDADD) $(LIBS)
+
 test-loopback$(EXEEXT): $(test_loopback_OBJECTS) $(test_loopback_DEPENDENCIES) $(EXTRA_test_loopback_DEPENDENCIES) 
 	@rm -f test-loopback$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(test_loopback_OBJECTS) $(test_loopback_LDADD) $(LIBS)
+
 test-marshal$(EXEEXT): $(test_marshal_OBJECTS) $(test_marshal_DEPENDENCIES) $(EXTRA_test_marshal_DEPENDENCIES) 
 	@rm -f test-marshal$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(test_marshal_OBJECTS) $(test_marshal_LDADD) $(LIBS)
+
 test-names$(EXEEXT): $(test_names_OBJECTS) $(test_names_DEPENDENCIES) $(EXTRA_test_names_DEPENDENCIES) 
 	@rm -f test-names$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(test_names_OBJECTS) $(test_names_LDADD) $(LIBS)
+
 test-printf$(EXEEXT): $(test_printf_OBJECTS) $(test_printf_DEPENDENCIES) $(EXTRA_test_printf_DEPENDENCIES) 
 	@rm -f test-printf$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(test_printf_OBJECTS) $(test_printf_LDADD) $(LIBS)
+
 test-refs$(EXEEXT): $(test_refs_OBJECTS) $(test_refs_DEPENDENCIES) $(EXTRA_test_refs_DEPENDENCIES) 
 	@rm -f test-refs$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(test_refs_OBJECTS) $(test_refs_LDADD) $(LIBS)
+
 test-relay$(EXEEXT): $(test_relay_OBJECTS) $(test_relay_DEPENDENCIES) $(EXTRA_test_relay_DEPENDENCIES) 
 	@rm -f test-relay$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(test_relay_OBJECTS) $(test_relay_LDADD) $(LIBS)
+
 test-segfault$(EXEEXT): $(test_segfault_OBJECTS) $(test_segfault_DEPENDENCIES) $(EXTRA_test_segfault_DEPENDENCIES) 
 	@rm -f test-segfault$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(test_segfault_OBJECTS) $(test_segfault_LDADD) $(LIBS)
+
 test-service$(EXEEXT): $(test_service_OBJECTS) $(test_service_DEPENDENCIES) $(EXTRA_test_service_DEPENDENCIES) 
 	@rm -f test-service$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(test_service_OBJECTS) $(test_service_LDADD) $(LIBS)
+
 test-shell-service$(EXEEXT): $(test_shell_service_OBJECTS) $(test_shell_service_DEPENDENCIES) $(EXTRA_test_shell_service_DEPENDENCIES) 
 	@rm -f test-shell-service$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(test_shell_service_OBJECTS) $(test_shell_service_LDADD) $(LIBS)
+
 test-sleep-forever$(EXEEXT): $(test_sleep_forever_OBJECTS) $(test_sleep_forever_DEPENDENCIES) $(EXTRA_test_sleep_forever_DEPENDENCIES) 
 	@rm -f test-sleep-forever$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(test_sleep_forever_OBJECTS) $(test_sleep_forever_LDADD) $(LIBS)
+
 test-syntax$(EXEEXT): $(test_syntax_OBJECTS) $(test_syntax_DEPENDENCIES) $(EXTRA_test_syntax_DEPENDENCIES) 
 	@rm -f test-syntax$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(test_syntax_OBJECTS) $(test_syntax_LDADD) $(LIBS)
+
 test-syslog$(EXEEXT): $(test_syslog_OBJECTS) $(test_syslog_DEPENDENCIES) $(EXTRA_test_syslog_DEPENDENCIES) 
 	@rm -f test-syslog$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(test_syslog_OBJECTS) $(test_syslog_LDADD) $(LIBS)
@@ -965,14 +1252,14 @@ distclean-compile:
 @am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c $<
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
 @am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@@ -1191,22 +1478,25 @@ clean-libtool:
 	-rm -rf .libs _libs
 
 # This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
 	dot_seen=no; \
 	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
 	  echo "Making $$target in $$subdir"; \
 	  if test "$$subdir" = "."; then \
 	    dot_seen=yes; \
@@ -1221,57 +1511,12 @@ $(RECURSIVE_TARGETS):
 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 	fi; test -z "$$fail"
 
-$(RECURSIVE_CLEAN_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
 
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
@@ -1287,12 +1532,7 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	$(am__define_uniq_tagged_files); \
 	shift; \
 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
@@ -1304,15 +1544,11 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	      $$unique; \
 	  fi; \
 	fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
 	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$unique
@@ -1321,102 +1557,285 @@ GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
-check-TESTS: $(TESTS)
-	@failed=0; all=0; xfail=0; xpass=0; skip=0; \
-	srcdir=$(srcdir); export srcdir; \
-	list=' $(TESTS) '; \
-	$(am__tty_colors); \
-	if test -n "$$list"; then \
-	  for tst in $$list; do \
-	    if test -f ./$$tst; then dir=./; \
-	    elif test -f $$tst; then dir=; \
-	    else dir="$(srcdir)/"; fi; \
-	    if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
-	      all=`expr $$all + 1`; \
-	      case " $(XFAIL_TESTS) " in \
-	      *[\ \	]$$tst[\ \	]*) \
-		xpass=`expr $$xpass + 1`; \
-		failed=`expr $$failed + 1`; \
-		col=$$red; res=XPASS; \
-	      ;; \
-	      *) \
-		col=$$grn; res=PASS; \
-	      ;; \
-	      esac; \
-	    elif test $$? -ne 77; then \
-	      all=`expr $$all + 1`; \
-	      case " $(XFAIL_TESTS) " in \
-	      *[\ \	]$$tst[\ \	]*) \
-		xfail=`expr $$xfail + 1`; \
-		col=$$lgn; res=XFAIL; \
-	      ;; \
-	      *) \
-		failed=`expr $$failed + 1`; \
-		col=$$red; res=FAIL; \
-	      ;; \
-	      esac; \
-	    else \
-	      skip=`expr $$skip + 1`; \
-	      col=$$blu; res=SKIP; \
-	    fi; \
-	    echo "$${col}$$res$${std}: $$tst"; \
-	  done; \
-	  if test "$$all" -eq 1; then \
-	    tests="test"; \
-	    All=""; \
-	  else \
-	    tests="tests"; \
-	    All="All "; \
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+	rm -f $< $@
+	$(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+	@:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+	@$(am__set_TESTS_bases); \
+	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+	redo_bases=`for i in $$bases; do \
+	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+	            done`; \
+	if test -n "$$redo_bases"; then \
+	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+	  if $(am__make_dryrun); then :; else \
+	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
 	  fi; \
-	  if test "$$failed" -eq 0; then \
-	    if test "$$xfail" -eq 0; then \
-	      banner="$$All$$all $$tests passed"; \
-	    else \
-	      if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \
-	      banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \
-	    fi; \
-	  else \
-	    if test "$$xpass" -eq 0; then \
-	      banner="$$failed of $$all $$tests failed"; \
+	fi; \
+	if test -n "$$am__remaking_logs"; then \
+	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+	       "recursion detected" >&2; \
+	else \
+	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+	fi; \
+	if $(am__make_dryrun); then :; else \
+	  st=0;  \
+	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+	  for i in $$redo_bases; do \
+	    test -f $$i.trs && test -r $$i.trs \
+	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+	    test -f $$i.log && test -r $$i.log \
+	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+	  done; \
+	  test $$st -eq 0 || exit 1; \
+	fi
+	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+	ws='[ 	]'; \
+	results=`for b in $$bases; do echo $$b.trs; done`; \
+	test -n "$$results" || results=/dev/null; \
+	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
+	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
+	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
+	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
+	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+	  success=true; \
+	else \
+	  success=false; \
+	fi; \
+	br='==================='; br=$$br$$br$$br$$br; \
+	result_count () \
+	{ \
+	    if test x"$$1" = x"--maybe-color"; then \
+	      maybe_colorize=yes; \
+	    elif test x"$$1" = x"--no-color"; then \
+	      maybe_colorize=no; \
 	    else \
-	      if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \
-	      banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \
+	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
 	    fi; \
-	  fi; \
-	  dashes="$$banner"; \
-	  skipped=""; \
-	  if test "$$skip" -ne 0; then \
-	    if test "$$skip" -eq 1; then \
-	      skipped="($$skip test was not run)"; \
+	    shift; \
+	    desc=$$1 count=$$2; \
+	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
+	      color_start=$$3 color_end=$$std; \
 	    else \
-	      skipped="($$skip tests were not run)"; \
+	      color_start= color_end=; \
 	    fi; \
-	    test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
-	      dashes="$$skipped"; \
-	  fi; \
-	  report=""; \
-	  if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
-	    report="Please report to $(PACKAGE_BUGREPORT)"; \
-	    test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
-	      dashes="$$report"; \
-	  fi; \
-	  dashes=`echo "$$dashes" | sed s/./=/g`; \
-	  if test "$$failed" -eq 0; then \
-	    col="$$grn"; \
-	  else \
-	    col="$$red"; \
-	  fi; \
-	  echo "$${col}$$dashes$${std}"; \
-	  echo "$${col}$$banner$${std}"; \
-	  test -z "$$skipped" || echo "$${col}$$skipped$${std}"; \
-	  test -z "$$report" || echo "$${col}$$report$${std}"; \
-	  echo "$${col}$$dashes$${std}"; \
-	  test "$$failed" -eq 0; \
-	else :; fi
+	    echo "$${color_start}# $$desc $$count$${color_end}"; \
+	}; \
+	create_testsuite_report () \
+	{ \
+	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
+	  result_count $$1 "PASS: " $$pass  "$$grn"; \
+	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
+	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+	  result_count $$1 "FAIL: " $$fail  "$$red"; \
+	  result_count $$1 "XPASS:" $$xpass "$$red"; \
+	  result_count $$1 "ERROR:" $$error "$$mgn"; \
+	}; \
+	{								\
+	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
+	    $(am__rst_title);						\
+	  create_testsuite_report --no-color;				\
+	  echo;								\
+	  echo ".. contents:: :depth: 2";				\
+	  echo;								\
+	  for b in $$bases; do echo $$b; done				\
+	    | $(am__create_global_log);					\
+	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
+	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
+	if $$success; then						\
+	  col="$$grn";							\
+	 else								\
+	  col="$$red";							\
+	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
+	fi;								\
+	echo "$${col}$$br$${std}"; 					\
+	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
+	echo "$${col}$$br$${std}"; 					\
+	create_testsuite_report --maybe-color;				\
+	echo "$$col$$br$$std";						\
+	if $$success; then :; else					\
+	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
+	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
+	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
+	  fi;								\
+	  echo "$$col$$br$$std";					\
+	fi;								\
+	$$success || exit 1
+
+check-TESTS:
+	@list='$(RECHECK_LOGS)';           test -z "$$list" || rm -f $$list
+	@list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	trs_list=`for i in $$bases; do echo $$i.trs; done`; \
+	log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
+	exit $$?;
+recheck: all 
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	bases=`for i in $$bases; do echo $$i; done \
+	         | $(am__list_recheck_tests)` || exit 1; \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	log_list=`echo $$log_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+	        am__force_recheck=am--force-recheck \
+	        TEST_LOGS="$$log_list"; \
+	exit $$?
+shell-test.log: shell-test$(EXEEXT)
+	@p='shell-test$(EXEEXT)'; \
+	b='shell-test'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+test-printf.log: test-printf$(EXEEXT)
+	@p='test-printf$(EXEEXT)'; \
+	b='test-printf'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+test-corrupt.log: test-corrupt$(EXEEXT)
+	@p='test-corrupt$(EXEEXT)'; \
+	b='test-corrupt'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+test-dbus-daemon.log: test-dbus-daemon$(EXEEXT)
+	@p='test-dbus-daemon$(EXEEXT)'; \
+	b='test-dbus-daemon'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+test-dbus-daemon-eavesdrop.log: test-dbus-daemon-eavesdrop$(EXEEXT)
+	@p='test-dbus-daemon-eavesdrop$(EXEEXT)'; \
+	b='test-dbus-daemon-eavesdrop'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+test-loopback.log: test-loopback$(EXEEXT)
+	@p='test-loopback$(EXEEXT)'; \
+	b='test-loopback'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+test-marshal.log: test-marshal$(EXEEXT)
+	@p='test-marshal$(EXEEXT)'; \
+	b='test-marshal'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+test-refs.log: test-refs$(EXEEXT)
+	@p='test-refs$(EXEEXT)'; \
+	b='test-refs'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+test-relay.log: test-relay$(EXEEXT)
+	@p='test-relay$(EXEEXT)'; \
+	b='test-relay'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+test-syntax.log: test-syntax$(EXEEXT)
+	@p='test-syntax$(EXEEXT)'; \
+	b='test-syntax'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+test-syslog.log: test-syslog$(EXEEXT)
+	@p='test-syslog$(EXEEXT)'; \
+	b='test-syslog'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+../bus/bus-test.log: ../bus/bus-test$(EXEEXT)
+	@p='../bus/bus-test$(EXEEXT)'; \
+	b='../bus/bus-test'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+../bus/bus-test-system.log: ../bus/bus-test-system$(EXEEXT)
+	@p='../bus/bus-test-system$(EXEEXT)'; \
+	b='../bus/bus-test-system'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+../dbus/dbus-test.log: ../dbus/dbus-test$(EXEEXT)
+	@p='../dbus/dbus-test$(EXEEXT)'; \
+	b='../dbus/dbus-test'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+../bus/bus-test-launch-helper.log: ../bus/bus-test-launch-helper$(EXEEXT)
+	@p='../bus/bus-test-launch-helper$(EXEEXT)'; \
+	b='../bus/bus-test-launch-helper'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+.test.log:
+	@p='$<'; \
+	$(am__set_b); \
+	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.test$(EXEEXT).log:
+@am__EXEEXT_TRUE@	@p='$<'; \
+@am__EXEEXT_TRUE@	$(am__set_b); \
+@am__EXEEXT_TRUE@	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
+@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
 
 distdir: $(DISTFILES)
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
@@ -1502,6 +1921,9 @@ install-strip:
 	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 	fi
 mostlyclean-generic:
+	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
 
 clean-generic:
 	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
@@ -1585,14 +2007,12 @@ ps-am:
 
 uninstall-am: uninstall-testexecPROGRAMS
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) check-am \
-	ctags-recursive install-am install-strip tags-recursive
+.MAKE: $(am__recursive_targets) check-am install-am install-strip
 
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
-	all all-am all-local check check-TESTS check-am clean \
-	clean-generic clean-libtool clean-local \
-	clean-noinstLTLIBRARIES clean-noinstPROGRAMS \
-	clean-testexecPROGRAMS ctags ctags-recursive distclean \
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
+	check check-TESTS check-am clean clean-generic clean-libtool \
+	clean-local clean-noinstLTLIBRARIES clean-noinstPROGRAMS \
+	clean-testexecPROGRAMS cscopelist-am ctags ctags-am distclean \
 	distclean-compile distclean-generic distclean-libtool \
 	distclean-tags distdir dvi dvi-am html html-am info info-am \
 	install install-am install-data install-data-am install-dvi \
@@ -1603,8 +2023,8 @@ uninstall-am: uninstall-testexecPROGRAMS
 	installcheck-am installcheck-local installdirs installdirs-am \
 	maintainer-clean maintainer-clean-generic mostlyclean \
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-	pdf pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
-	uninstall-testexecPROGRAMS
+	pdf pdf-am ps ps-am recheck tags tags-am uninstall \
+	uninstall-am uninstall-testexecPROGRAMS
 
 
 # If we're installing the tests into a DESTDIR we can't run them
diff --git a/test/name-test/Makefile.am b/test/name-test/Makefile.am
index da41e58b..8ed1e160 100644
--- a/test/name-test/Makefile.am
+++ b/test/name-test/Makefile.am
@@ -19,7 +19,9 @@ TESTS_ENVIRONMENT = \
         PYTHON=@PYTHON@ \
         DBUS_TEST_DATA=@abs_top_builddir@/test/data \
         DBUS_TEST_DAEMON=@abs_top_builddir@/bus/dbus-daemon$(EXEEXT) \
+        XDG_RUNTIME_DIR=@abs_top_builddir@/test/XDG_RUNTIME_DIR \
         $(NULL)
+
 TESTS=run-test.sh run-test-systemserver.sh
 else
 TESTS=
diff --git a/test/name-test/Makefile.in b/test/name-test/Makefile.in
index 089c7adb..5d037d60 100644
--- a/test/name-test/Makefile.in
+++ b/test/name-test/Makefile.in
@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.14.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,23 +15,51 @@
 @SET_MAKE@
 
 VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
     esac; \
-    test $$am__dry = yes; \
-  }
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -62,7 +89,8 @@ host_triplet = @host@
 @DBUS_ENABLE_EMBEDDED_TESTS_TRUE@	test-privserver-client$(EXEEXT) \
 @DBUS_ENABLE_EMBEDDED_TESTS_TRUE@	test-autolaunch$(EXEEXT)
 subdir = test/name-test
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(top_srcdir)/depcomp $(top_srcdir)/test-driver
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/as-ac-expand.m4 \
 	$(top_srcdir)/m4/compiler.m4 $(top_srcdir)/m4/libtool.m4 \
@@ -84,6 +112,7 @@ test_autolaunch_OBJECTS = test-autolaunch.$(OBJEXT)
 AM_V_lt = $(am__v_lt_@AM_V@)
 am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
 am__v_lt_0 = --silent
+am__v_lt_1 = 
 test_ids_SOURCES = test-ids.c
 test_ids_OBJECTS = test-ids.$(OBJEXT)
 @DBUS_ENABLE_EMBEDDED_TESTS_TRUE@test_ids_DEPENDENCIES = $(top_builddir)/dbus/libdbus-internal.la
@@ -107,6 +136,18 @@ test_shutdown_OBJECTS = test-shutdown.$(OBJEXT)
 test_threads_init_SOURCES = test-threads-init.c
 test_threads_init_OBJECTS = test-threads-init.$(OBJEXT)
 @DBUS_ENABLE_EMBEDDED_TESTS_TRUE@test_threads_init_DEPENDENCIES = $(top_builddir)/dbus/libdbus-internal.la
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
@@ -119,20 +160,16 @@ LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 	$(AM_CFLAGS) $(CFLAGS)
 AM_V_CC = $(am__v_CC_@AM_V@)
 am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
-am__v_CC_0 = @echo "  CC    " $@;
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
 CCLD = $(CC)
 LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
 	$(AM_LDFLAGS) $(LDFLAGS) -o $@
 AM_V_CCLD = $(am__v_CCLD_@AM_V@)
 am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
-am__v_CCLD_0 = @echo "  CCLD  " $@;
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo "  GEN   " $@;
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
 SOURCES = test-autolaunch.c test-ids.c test-pending-call-dispatch.c \
 	test-pending-call-timeout.c test-privserver.c \
 	test-privserver-client.c test-shutdown.c test-threads-init.c
@@ -145,10 +182,229 @@ am__can_run_installinfo = \
     n|no|NO) false;; \
     *) (install-info --version) >/dev/null 2>&1;; \
   esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
-am__tty_colors = \
-red=; grn=; lgn=; blu=; std=
+am__tty_colors_dummy = \
+  mgn= red= grn= lgn= blu= brg= std=; \
+  am__color_tests=no
+am__tty_colors = { \
+  $(am__tty_colors_dummy); \
+  if test "X$(AM_COLOR_TESTS)" = Xno; then \
+    am__color_tests=no; \
+  elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+    am__color_tests=yes; \
+  elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+    am__color_tests=yes; \
+  fi; \
+  if test $$am__color_tests = yes; then \
+    red=''; \
+    grn=''; \
+    lgn=''; \
+    blu=''; \
+    mgn=''; \
+    brg=''; \
+    std=''; \
+  fi; \
+}
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__recheck_rx = ^[ 	]*:recheck:[ 	]*
+am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
+am__copy_in_global_log_rx = ^[ 	]*:copy-in-global-log:[ 	]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+  recheck = 1; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+        { \
+          if ((getline line2 < ($$0 ".log")) < 0) \
+	    recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+        { \
+          recheck = 0; \
+          break; \
+        } \
+      else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+        { \
+          break; \
+        } \
+    }; \
+  if (recheck) \
+    print $$0; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+  print "fatal: making $@: " msg | "cat >&2"; \
+  exit 1; \
+} \
+function rst_section(header) \
+{ \
+  print header; \
+  len = length(header); \
+  for (i = 1; i <= len; i = i + 1) \
+    printf "="; \
+  printf "\n\n"; \
+} \
+{ \
+  copy_in_global_log = 1; \
+  global_test_result = "RUN"; \
+  while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+    { \
+      if (rc < 0) \
+         fatal("failed to read from " $$0 ".trs"); \
+      if (line ~ /$(am__global_test_result_rx)/) \
+        { \
+          sub("$(am__global_test_result_rx)", "", line); \
+          sub("[ 	]*$$", "", line); \
+          global_test_result = line; \
+        } \
+      else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+        copy_in_global_log = 0; \
+    }; \
+  if (copy_in_global_log) \
+    { \
+      rst_section(global_test_result ": " $$0); \
+      while ((rc = (getline line < ($$0 ".log"))) != 0) \
+      { \
+        if (rc < 0) \
+          fatal("failed to read from " $$0 ".log"); \
+        print line; \
+      }; \
+      printf "\n"; \
+    }; \
+  close ($$0 ".trs"); \
+  close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+  --color-tests "$$am__color_tests" \
+  --enable-hard-errors "$$am__enable_hard_errors" \
+  --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test.  Creates the
+# directory for the log if needed.  Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log.  Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup);					\
+$(am__vpath_adj_setup) $(am__vpath_adj)			\
+$(am__tty_colors);					\
+srcdir=$(srcdir); export srcdir;			\
+case "$@" in						\
+  */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;	\
+    *) am__odir=.;; 					\
+esac;							\
+test "x$$am__odir" = x"." || test -d "$$am__odir" 	\
+  || $(MKDIR_P) "$$am__odir" || exit $$?;		\
+if test -f "./$$f"; then dir=./;			\
+elif test -f "$$f"; then dir=;				\
+else dir="$(srcdir)/"; fi;				\
+tst=$$dir$$f; log='$@'; 				\
+if test -n '$(DISABLE_HARD_ERRORS)'; then		\
+  am__enable_hard_errors=no; 				\
+else							\
+  am__enable_hard_errors=yes; 				\
+fi; 							\
+case " $(XFAIL_TESTS) " in				\
+  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
+    am__expect_failure=yes;;				\
+  *)							\
+    am__expect_failure=no;;				\
+esac; 							\
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed).  The result is saved in the shell variable
+# '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+  bases='$(TEST_LOGS)'; \
+  bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+  bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+AM_RECURSIVE_TARGETS = check recheck
+TEST_SUITE_LOG = test-suite.log
+TEST_EXTENSIONS = @EXEEXT@ .test
+LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
+LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
+am__set_b = \
+  case '$@' in \
+    */*) \
+      case '$*' in \
+        */*) b='$*';; \
+          *) b=`echo '$@' | sed 's/\.log$$//'`; \
+       esac;; \
+    *) \
+      b='$*';; \
+  esac
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.test.log=.log)
+TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
+TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
+	$(TEST_LOG_FLAGS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 ADT_LIBS = @ADT_LIBS@
@@ -373,6 +629,7 @@ AM_LDFLAGS = @R_DYNAMIC_LDFLAG@
 @DBUS_ENABLE_EMBEDDED_TESTS_TRUE@        PYTHON=@PYTHON@ \
 @DBUS_ENABLE_EMBEDDED_TESTS_TRUE@        DBUS_TEST_DATA=@abs_top_builddir@/test/data \
 @DBUS_ENABLE_EMBEDDED_TESTS_TRUE@        DBUS_TEST_DAEMON=@abs_top_builddir@/bus/dbus-daemon$(EXEEXT) \
+@DBUS_ENABLE_EMBEDDED_TESTS_TRUE@        XDG_RUNTIME_DIR=@abs_top_builddir@/test/XDG_RUNTIME_DIR \
 @DBUS_ENABLE_EMBEDDED_TESTS_TRUE@        $(NULL)
 
 EXTRA_DIST = run-test.sh run-test-systemserver.sh test-wait-for-echo.py test-activation-forking.py
@@ -387,7 +644,7 @@ EXTRA_DIST = run-test.sh run-test-systemserver.sh test-wait-for-echo.py test-act
 all: all-am
 
 .SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
+.SUFFIXES: .c .lo .log .o .obj .test .test$(EXEEXT) .trs
 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
@@ -427,27 +684,35 @@ clean-noinstPROGRAMS:
 	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
 	echo " rm -f" $$list; \
 	rm -f $$list
+
 test-autolaunch$(EXEEXT): $(test_autolaunch_OBJECTS) $(test_autolaunch_DEPENDENCIES) $(EXTRA_test_autolaunch_DEPENDENCIES) 
 	@rm -f test-autolaunch$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(test_autolaunch_OBJECTS) $(test_autolaunch_LDADD) $(LIBS)
+
 test-ids$(EXEEXT): $(test_ids_OBJECTS) $(test_ids_DEPENDENCIES) $(EXTRA_test_ids_DEPENDENCIES) 
 	@rm -f test-ids$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(test_ids_OBJECTS) $(test_ids_LDADD) $(LIBS)
+
 test-pending-call-dispatch$(EXEEXT): $(test_pending_call_dispatch_OBJECTS) $(test_pending_call_dispatch_DEPENDENCIES) $(EXTRA_test_pending_call_dispatch_DEPENDENCIES) 
 	@rm -f test-pending-call-dispatch$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(test_pending_call_dispatch_OBJECTS) $(test_pending_call_dispatch_LDADD) $(LIBS)
+
 test-pending-call-timeout$(EXEEXT): $(test_pending_call_timeout_OBJECTS) $(test_pending_call_timeout_DEPENDENCIES) $(EXTRA_test_pending_call_timeout_DEPENDENCIES) 
 	@rm -f test-pending-call-timeout$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(test_pending_call_timeout_OBJECTS) $(test_pending_call_timeout_LDADD) $(LIBS)
+
 test-privserver$(EXEEXT): $(test_privserver_OBJECTS) $(test_privserver_DEPENDENCIES) $(EXTRA_test_privserver_DEPENDENCIES) 
 	@rm -f test-privserver$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(test_privserver_OBJECTS) $(test_privserver_LDADD) $(LIBS)
+
 test-privserver-client$(EXEEXT): $(test_privserver_client_OBJECTS) $(test_privserver_client_DEPENDENCIES) $(EXTRA_test_privserver_client_DEPENDENCIES) 
 	@rm -f test-privserver-client$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(test_privserver_client_OBJECTS) $(test_privserver_client_LDADD) $(LIBS)
+
 test-shutdown$(EXEEXT): $(test_shutdown_OBJECTS) $(test_shutdown_DEPENDENCIES) $(EXTRA_test_shutdown_DEPENDENCIES) 
 	@rm -f test-shutdown$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(test_shutdown_OBJECTS) $(test_shutdown_LDADD) $(LIBS)
+
 test-threads-init$(EXEEXT): $(test_threads_init_OBJECTS) $(test_threads_init_DEPENDENCIES) $(EXTRA_test_threads_init_DEPENDENCIES) 
 	@rm -f test-threads-init$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(test_threads_init_OBJECTS) $(test_threads_init_LDADD) $(LIBS)
@@ -472,14 +737,14 @@ distclean-compile:
 @am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c $<
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
 @am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@@ -494,26 +759,15 @@ mostlyclean-libtool:
 clean-libtool:
 	-rm -rf .libs _libs
 
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 	set x; \
 	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	$(am__define_uniq_tagged_files); \
 	shift; \
 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
@@ -525,15 +779,11 @@ TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 	      $$unique; \
 	  fi; \
 	fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
 	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$unique
@@ -542,102 +792,194 @@ GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
 	  && $(am__cd) $(top_srcdir) \
 	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
-check-TESTS: $(TESTS)
-	@failed=0; all=0; xfail=0; xpass=0; skip=0; \
-	srcdir=$(srcdir); export srcdir; \
-	list=' $(TESTS) '; \
-	$(am__tty_colors); \
-	if test -n "$$list"; then \
-	  for tst in $$list; do \
-	    if test -f ./$$tst; then dir=./; \
-	    elif test -f $$tst; then dir=; \
-	    else dir="$(srcdir)/"; fi; \
-	    if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
-	      all=`expr $$all + 1`; \
-	      case " $(XFAIL_TESTS) " in \
-	      *[\ \	]$$tst[\ \	]*) \
-		xpass=`expr $$xpass + 1`; \
-		failed=`expr $$failed + 1`; \
-		col=$$red; res=XPASS; \
-	      ;; \
-	      *) \
-		col=$$grn; res=PASS; \
-	      ;; \
-	      esac; \
-	    elif test $$? -ne 77; then \
-	      all=`expr $$all + 1`; \
-	      case " $(XFAIL_TESTS) " in \
-	      *[\ \	]$$tst[\ \	]*) \
-		xfail=`expr $$xfail + 1`; \
-		col=$$lgn; res=XFAIL; \
-	      ;; \
-	      *) \
-		failed=`expr $$failed + 1`; \
-		col=$$red; res=FAIL; \
-	      ;; \
-	      esac; \
-	    else \
-	      skip=`expr $$skip + 1`; \
-	      col=$$blu; res=SKIP; \
-	    fi; \
-	    echo "$${col}$$res$${std}: $$tst"; \
-	  done; \
-	  if test "$$all" -eq 1; then \
-	    tests="test"; \
-	    All=""; \
-	  else \
-	    tests="tests"; \
-	    All="All "; \
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+	rm -f $< $@
+	$(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+	@:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+	@$(am__set_TESTS_bases); \
+	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+	redo_bases=`for i in $$bases; do \
+	              am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+	            done`; \
+	if test -n "$$redo_bases"; then \
+	  redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+	  redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+	  if $(am__make_dryrun); then :; else \
+	    rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
 	  fi; \
-	  if test "$$failed" -eq 0; then \
-	    if test "$$xfail" -eq 0; then \
-	      banner="$$All$$all $$tests passed"; \
-	    else \
-	      if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \
-	      banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \
-	    fi; \
-	  else \
-	    if test "$$xpass" -eq 0; then \
-	      banner="$$failed of $$all $$tests failed"; \
+	fi; \
+	if test -n "$$am__remaking_logs"; then \
+	  echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+	       "recursion detected" >&2; \
+	else \
+	  am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+	fi; \
+	if $(am__make_dryrun); then :; else \
+	  st=0;  \
+	  errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+	  for i in $$redo_bases; do \
+	    test -f $$i.trs && test -r $$i.trs \
+	      || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+	    test -f $$i.log && test -r $$i.log \
+	      || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+	  done; \
+	  test $$st -eq 0 || exit 1; \
+	fi
+	@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+	ws='[ 	]'; \
+	results=`for b in $$bases; do echo $$b.trs; done`; \
+	test -n "$$results" || results=/dev/null; \
+	all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
+	pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
+	fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
+	skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
+	xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+	xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+	error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+	if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+	  success=true; \
+	else \
+	  success=false; \
+	fi; \
+	br='==================='; br=$$br$$br$$br$$br; \
+	result_count () \
+	{ \
+	    if test x"$$1" = x"--maybe-color"; then \
+	      maybe_colorize=yes; \
+	    elif test x"$$1" = x"--no-color"; then \
+	      maybe_colorize=no; \
 	    else \
-	      if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \
-	      banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \
+	      echo "$@: invalid 'result_count' usage" >&2; exit 4; \
 	    fi; \
-	  fi; \
-	  dashes="$$banner"; \
-	  skipped=""; \
-	  if test "$$skip" -ne 0; then \
-	    if test "$$skip" -eq 1; then \
-	      skipped="($$skip test was not run)"; \
+	    shift; \
+	    desc=$$1 count=$$2; \
+	    if test $$maybe_colorize = yes && test $$count -gt 0; then \
+	      color_start=$$3 color_end=$$std; \
 	    else \
-	      skipped="($$skip tests were not run)"; \
+	      color_start= color_end=; \
 	    fi; \
-	    test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
-	      dashes="$$skipped"; \
-	  fi; \
-	  report=""; \
-	  if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
-	    report="Please report to $(PACKAGE_BUGREPORT)"; \
-	    test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
-	      dashes="$$report"; \
-	  fi; \
-	  dashes=`echo "$$dashes" | sed s/./=/g`; \
-	  if test "$$failed" -eq 0; then \
-	    col="$$grn"; \
-	  else \
-	    col="$$red"; \
-	  fi; \
-	  echo "$${col}$$dashes$${std}"; \
-	  echo "$${col}$$banner$${std}"; \
-	  test -z "$$skipped" || echo "$${col}$$skipped$${std}"; \
-	  test -z "$$report" || echo "$${col}$$report$${std}"; \
-	  echo "$${col}$$dashes$${std}"; \
-	  test "$$failed" -eq 0; \
-	else :; fi
+	    echo "$${color_start}# $$desc $$count$${color_end}"; \
+	}; \
+	create_testsuite_report () \
+	{ \
+	  result_count $$1 "TOTAL:" $$all   "$$brg"; \
+	  result_count $$1 "PASS: " $$pass  "$$grn"; \
+	  result_count $$1 "SKIP: " $$skip  "$$blu"; \
+	  result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+	  result_count $$1 "FAIL: " $$fail  "$$red"; \
+	  result_count $$1 "XPASS:" $$xpass "$$red"; \
+	  result_count $$1 "ERROR:" $$error "$$mgn"; \
+	}; \
+	{								\
+	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
+	    $(am__rst_title);						\
+	  create_testsuite_report --no-color;				\
+	  echo;								\
+	  echo ".. contents:: :depth: 2";				\
+	  echo;								\
+	  for b in $$bases; do echo $$b; done				\
+	    | $(am__create_global_log);					\
+	} >$(TEST_SUITE_LOG).tmp || exit 1;				\
+	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
+	if $$success; then						\
+	  col="$$grn";							\
+	 else								\
+	  col="$$red";							\
+	  test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);		\
+	fi;								\
+	echo "$${col}$$br$${std}"; 					\
+	echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";	\
+	echo "$${col}$$br$${std}"; 					\
+	create_testsuite_report --maybe-color;				\
+	echo "$$col$$br$$std";						\
+	if $$success; then :; else					\
+	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
+	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
+	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
+	  fi;								\
+	  echo "$$col$$br$$std";					\
+	fi;								\
+	$$success || exit 1
+
+check-TESTS:
+	@list='$(RECHECK_LOGS)';           test -z "$$list" || rm -f $$list
+	@list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	trs_list=`for i in $$bases; do echo $$i.trs; done`; \
+	log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
+	exit $$?;
+recheck: all 
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@set +e; $(am__set_TESTS_bases); \
+	bases=`for i in $$bases; do echo $$i; done \
+	         | $(am__list_recheck_tests)` || exit 1; \
+	log_list=`for i in $$bases; do echo $$i.log; done`; \
+	log_list=`echo $$log_list`; \
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+	        am__force_recheck=am--force-recheck \
+	        TEST_LOGS="$$log_list"; \
+	exit $$?
+run-test.sh.log: run-test.sh
+	@p='run-test.sh'; \
+	b='run-test.sh'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+run-test-systemserver.sh.log: run-test-systemserver.sh
+	@p='run-test-systemserver.sh'; \
+	b='run-test-systemserver.sh'; \
+	$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+.test.log:
+	@p='$<'; \
+	$(am__set_b); \
+	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
+	--log-file $$b.log --trs-file $$b.trs \
+	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
+	"$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.test$(EXEEXT).log:
+@am__EXEEXT_TRUE@	@p='$<'; \
+@am__EXEEXT_TRUE@	$(am__set_b); \
+@am__EXEEXT_TRUE@	$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@	--log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@	$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
+@am__EXEEXT_TRUE@	"$$tst" $(AM_TESTS_FD_REDIRECT)
 
 distdir: $(DISTFILES)
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
@@ -694,6 +1036,9 @@ install-strip:
 	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 	fi
 mostlyclean-generic:
+	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
 
 clean-generic:
 
@@ -777,9 +1122,9 @@ uninstall-am:
 
 .MAKE: check-am install-am install-strip
 
-.PHONY: CTAGS GTAGS all all-am check check-TESTS check-am clean \
-	clean-generic clean-libtool clean-noinstPROGRAMS ctags \
-	distclean distclean-compile distclean-generic \
+.PHONY: CTAGS GTAGS TAGS all all-am check check-TESTS check-am clean \
+	clean-generic clean-libtool clean-noinstPROGRAMS cscopelist-am \
+	ctags ctags-am distclean distclean-compile distclean-generic \
 	distclean-libtool distclean-tags distdir dvi dvi-am html \
 	html-am info info-am install install-am install-data \
 	install-data-am install-dvi install-dvi-am install-exec \
@@ -789,7 +1134,7 @@ uninstall-am:
 	installcheck-am installdirs maintainer-clean \
 	maintainer-clean-generic mostlyclean mostlyclean-compile \
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	tags uninstall uninstall-am
+	recheck tags tags-am uninstall uninstall-am
 
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
diff --git a/test/name-test/run-test-systemserver.sh b/test/name-test/run-test-systemserver.sh
index afd1f045..90c03723 100755
--- a/test/name-test/run-test-systemserver.sh
+++ b/test/name-test/run-test-systemserver.sh
@@ -30,6 +30,11 @@ if test -n "$DBUS_TEST_MONITOR"; then
   dbus-monitor --session &
 fi
 
+XDG_RUNTIME_DIR="$DBUS_TOP_BUILDDIR"/test/XDG_RUNTIME_DIR
+test -d "$XDG_RUNTIME_DIR" || mkdir "$XDG_RUNTIME_DIR"
+chmod 0700 "$XDG_RUNTIME_DIR"
+export XDG_RUNTIME_DIR
+
 echo "running test-expected-echo-fail"
 ${DBUS_TOP_BUILDDIR}/libtool --mode=execute $DEBUG $DBUS_TOP_BUILDDIR/tools/dbus-send --print-reply --dest=org.freedesktop.DBus.TestSuiteEchoService /org/freedesktop/TestSuite org.freedesktop.TestSuite.Echo string:hi >echo-error-output.tmp 2>&1
 if ! grep -q 'DBus.Error' echo-error-output.tmp; then
diff --git a/test/name-test/run-test.sh b/test/name-test/run-test.sh
index cad5937e..84379c4a 100755
--- a/test/name-test/run-test.sh
+++ b/test/name-test/run-test.sh
@@ -30,6 +30,11 @@ if test -n "$DBUS_TEST_MONITOR"; then
   dbus-monitor --session &
 fi
 
+XDG_RUNTIME_DIR="$DBUS_TOP_BUILDDIR"/test/XDG_RUNTIME_DIR
+test -d "$XDG_RUNTIME_DIR" || mkdir "$XDG_RUNTIME_DIR"
+chmod 0700 "$XDG_RUNTIME_DIR"
+export XDG_RUNTIME_DIR
+
 echo "running test-ids"
 ${DBUS_TOP_BUILDDIR}/libtool --mode=execute $DEBUG $DBUS_TOP_BUILDDIR/test/name-test/test-ids || die "test-ids failed"