diff options
Diffstat (limited to 'test')
| -rw-r--r-- | test/Makefile.am | 2 | ||||
| -rw-r--r-- | test/Makefile.in | 874 | ||||
| -rw-r--r-- | test/data/valid-config-files/incoming-limit.conf.in (renamed from test/data/valid-config-files/incoming-limit.conf) | 2 | ||||
| -rw-r--r-- | test/name-test/Makefile.in | 644 | ||||
| -rw-r--r-- | test/spawn-test.c | 2 |
5 files changed, 381 insertions, 1143 deletions
diff --git a/test/Makefile.am b/test/Makefile.am index eddcd644..870ce321 100644 --- a/test/Makefile.am +++ b/test/Makefile.am @@ -246,6 +246,7 @@ in_data = \ data/valid-config-files-system/debug-allow-all-pass.conf.in \ data/valid-config-files/debug-allow-all-sha1.conf.in \ data/valid-config-files/debug-allow-all.conf.in \ + data/valid-config-files/incoming-limit.conf.in \ data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoExec.service.in \ data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoService.service.in \ data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoUser.service.in \ @@ -317,7 +318,6 @@ static_data = \ data/valid-config-files/basic.conf \ data/valid-config-files/basic.d/basic.conf \ data/valid-config-files/entities.conf \ - data/valid-config-files/incoming-limit.conf \ data/valid-config-files/many-rules.conf \ data/valid-config-files/system.d/test.conf \ data/valid-messages/array-of-array-of-uint32.message \ diff --git a/test/Makefile.in b/test/Makefile.in index 90556603..90ebd74d 100644 --- a/test/Makefile.in +++ b/test/Makefile.in @@ -1,8 +1,9 @@ -# Makefile.in generated by automake 1.14 from Makefile.am. +# Makefile.in generated by automake 1.11.6 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. - +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software +# Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -17,51 +18,23 @@ VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ +am__make_dryrun = \ + { \ + am__dry=no; \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -115,8 +88,7 @@ testexec_PROGRAMS = $(am__EXEEXT_7) @DBUS_ENABLE_INSTALLED_TESTS_TRUE@@DBUS_ENABLE_MODULAR_TESTS_TRUE@am__append_7 = $(installable_tests) $(installable_manual_tests) @DBUS_ENABLE_INSTALLED_TESTS_FALSE@@DBUS_ENABLE_MODULAR_TESTS_TRUE@am__append_8 = $(installable_tests) $(installable_manual_tests) subdir = test -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/depcomp $(top_srcdir)/test-driver +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/as-ac-expand.m4 \ $(top_srcdir)/m4/compiler.m4 $(top_srcdir)/m4/libtool.m4 \ @@ -141,7 +113,6 @@ libdbus_testutils_internal_la_OBJECTS = \ AM_V_lt = $(am__v_lt_@AM_V@) am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) am__v_lt_0 = --silent -am__v_lt_1 = am__DEPENDENCIES_1 = @DBUS_WITH_DBUS_GLIB_TRUE@libdbus_testutils_la_DEPENDENCIES = \ @DBUS_WITH_DBUS_GLIB_TRUE@ $(top_builddir)/dbus/libdbus-1.la \ @@ -246,18 +217,6 @@ am_test_syslog_OBJECTS = test_syslog-syslog.$(OBJEXT) test_syslog_OBJECTS = $(am_test_syslog_OBJECTS) test_syslog_DEPENDENCIES = libdbus-testutils-internal.la \ $(am__DEPENDENCIES_1) -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles @@ -270,16 +229,20 @@ LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ $(AM_CFLAGS) $(CFLAGS) AM_V_CC = $(am__v_CC_@AM_V@) am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) -am__v_CC_0 = @echo " CC " $@; -am__v_CC_1 = +am__v_CC_0 = @echo " CC " $@; +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ CCLD = $(CC) LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ AM_V_CCLD = $(am__v_CCLD_@AM_V@) am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) -am__v_CCLD_0 = @echo " CCLD " $@; -am__v_CCLD_1 = +am__v_CCLD_0 = @echo " CCLD " $@; +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; SOURCES = $(libdbus_testutils_internal_la_SOURCES) \ $(libdbus_testutils_la_SOURCES) $(manual_authz_SOURCES) \ shell-test.c spawn-test.c $(test_corrupt_SOURCES) \ @@ -300,14 +263,13 @@ DIST_SOURCES = $(libdbus_testutils_internal_la_SOURCES) \ $(test_relay_SOURCES) test-segfault.c test-service.c \ test-shell-service.c test-sleep-forever.c \ $(test_syntax_SOURCES) $(test_syslog_SOURCES) -RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ - ctags-recursive dvi-recursive html-recursive info-recursive \ - install-data-recursive install-dvi-recursive \ - install-exec-recursive install-html-recursive \ - install-info-recursive install-pdf-recursive \ - install-ps-recursive install-recursive installcheck-recursive \ - installdirs-recursive pdf-recursive ps-recursive \ - tags-recursive uninstall-recursive +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ @@ -316,235 +278,14 @@ am__can_run_installinfo = \ DATA = $(noinst_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive -am__recursive_targets = \ - $(RECURSIVE_TARGETS) \ - $(RECURSIVE_CLEAN_TARGETS) \ - $(am__extra_recursive_targets) -AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ - check recheck distdir -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` +AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ + $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ + distdir ETAGS = etags CTAGS = ctags -am__tty_colors_dummy = \ - mgn= red= grn= lgn= blu= brg= std=; \ - am__color_tests=no -am__tty_colors = { \ - $(am__tty_colors_dummy); \ - if test "X$(AM_COLOR_TESTS)" = Xno; then \ - am__color_tests=no; \ - elif test "X$(AM_COLOR_TESTS)" = Xalways; then \ - am__color_tests=yes; \ - elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \ - am__color_tests=yes; \ - fi; \ - if test $$am__color_tests = yes; then \ - red='[0;31m'; \ - grn='[0;32m'; \ - lgn='[1;32m'; \ - blu='[1;34m'; \ - mgn='[0;35m'; \ - brg='[1m'; \ - std='[m'; \ - fi; \ -} -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -am__recheck_rx = ^[ ]*:recheck:[ ]* -am__global_test_result_rx = ^[ ]*:global-test-result:[ ]* -am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]* -# A command that, given a newline-separated list of test names on the -# standard input, print the name of the tests that are to be re-run -# upon "make recheck". -am__list_recheck_tests = $(AWK) '{ \ - recheck = 1; \ - while ((rc = (getline line < ($$0 ".trs"))) != 0) \ - { \ - if (rc < 0) \ - { \ - if ((getline line2 < ($$0 ".log")) < 0) \ - recheck = 0; \ - break; \ - } \ - else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \ - { \ - recheck = 0; \ - break; \ - } \ - else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \ - { \ - break; \ - } \ - }; \ - if (recheck) \ - print $$0; \ - close ($$0 ".trs"); \ - close ($$0 ".log"); \ -}' -# A command that, given a newline-separated list of test names on the -# standard input, create the global log from their .trs and .log files. -am__create_global_log = $(AWK) ' \ -function fatal(msg) \ -{ \ - print "fatal: making $@: " msg | "cat >&2"; \ - exit 1; \ -} \ -function rst_section(header) \ -{ \ - print header; \ - len = length(header); \ - for (i = 1; i <= len; i = i + 1) \ - printf "="; \ - printf "\n\n"; \ -} \ -{ \ - copy_in_global_log = 1; \ - global_test_result = "RUN"; \ - while ((rc = (getline line < ($$0 ".trs"))) != 0) \ - { \ - if (rc < 0) \ - fatal("failed to read from " $$0 ".trs"); \ - if (line ~ /$(am__global_test_result_rx)/) \ - { \ - sub("$(am__global_test_result_rx)", "", line); \ - sub("[ ]*$$", "", line); \ - global_test_result = line; \ - } \ - else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \ - copy_in_global_log = 0; \ - }; \ - if (copy_in_global_log) \ - { \ - rst_section(global_test_result ": " $$0); \ - while ((rc = (getline line < ($$0 ".log"))) != 0) \ - { \ - if (rc < 0) \ - fatal("failed to read from " $$0 ".log"); \ - print line; \ - }; \ - printf "\n"; \ - }; \ - close ($$0 ".trs"); \ - close ($$0 ".log"); \ -}' -# Restructured Text title. -am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; } -# Solaris 10 'make', and several other traditional 'make' implementations, -# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it -# by disabling -e (using the XSI extension "set +e") if it's set. -am__sh_e_setup = case $$- in *e*) set +e;; esac -# Default flags passed to test drivers. -am__common_driver_flags = \ - --color-tests "$$am__color_tests" \ - --enable-hard-errors "$$am__enable_hard_errors" \ - --expect-failure "$$am__expect_failure" -# To be inserted before the command running the test. Creates the -# directory for the log if needed. Stores in $dir the directory -# containing $f, in $tst the test, in $log the log. Executes the -# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and -# passes TESTS_ENVIRONMENT. Set up options for the wrapper that -# will run the test scripts (or their associated LOG_COMPILER, if -# thy have one). -am__check_pre = \ -$(am__sh_e_setup); \ -$(am__vpath_adj_setup) $(am__vpath_adj) \ -$(am__tty_colors); \ -srcdir=$(srcdir); export srcdir; \ -case "$@" in \ - */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \ - *) am__odir=.;; \ -esac; \ -test "x$$am__odir" = x"." || test -d "$$am__odir" \ - || $(MKDIR_P) "$$am__odir" || exit $$?; \ -if test -f "./$$f"; then dir=./; \ -elif test -f "$$f"; then dir=; \ -else dir="$(srcdir)/"; fi; \ -tst=$$dir$$f; log='$@'; \ -if test -n '$(DISABLE_HARD_ERRORS)'; then \ - am__enable_hard_errors=no; \ -else \ - am__enable_hard_errors=yes; \ -fi; \ -case " $(XFAIL_TESTS) " in \ - *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \ - am__expect_failure=yes;; \ - *) \ - am__expect_failure=no;; \ -esac; \ -$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT) -# A shell command to get the names of the tests scripts with any registered -# extension removed (i.e., equivalently, the names of the test logs, with -# the '.log' extension removed). The result is saved in the shell variable -# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly, -# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)", -# since that might cause problem with VPATH rewrites for suffix-less tests. -# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'. -am__set_TESTS_bases = \ - bases='$(TEST_LOGS)'; \ - bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \ - bases=`echo $$bases` -RECHECK_LOGS = $(TEST_LOGS) +am__tty_colors = \ +red=; grn=; lgn=; blu=; std= @DBUS_ENABLE_MODULAR_TESTS_TRUE@am__EXEEXT_8 = $(am__EXEEXT_3) -TEST_SUITE_LOG = test-suite.log -TEST_EXTENSIONS = @EXEEXT@ .test -LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver -LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS) -am__set_b = \ - case '$@' in \ - */*) \ - case '$*' in \ - */*) b='$*';; \ - *) b=`echo '$@' | sed 's/\.log$$//'`; \ - esac;; \ - *) \ - b='$*';; \ - esac -am__test_logs1 = $(TESTS:=.log) -am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log) -TEST_LOGS = $(am__test_logs2:.test.log=.log) -TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver -TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \ - $(TEST_LOG_FLAGS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) am__relativize = \ dir0=`pwd`; \ @@ -935,6 +676,7 @@ in_data = \ data/valid-config-files-system/debug-allow-all-pass.conf.in \ data/valid-config-files/debug-allow-all-sha1.conf.in \ data/valid-config-files/debug-allow-all.conf.in \ + data/valid-config-files/incoming-limit.conf.in \ data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoExec.service.in \ data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoService.service.in \ data/invalid-service-files-system/org.freedesktop.DBus.TestSuiteNoUser.service.in \ @@ -1004,7 +746,6 @@ static_data = \ data/valid-config-files/basic.conf \ data/valid-config-files/basic.d/basic.conf \ data/valid-config-files/entities.conf \ - data/valid-config-files/incoming-limit.conf \ data/valid-config-files/many-rules.conf \ data/valid-config-files/system.d/test.conf \ data/valid-messages/array-of-array-of-uint32.message \ @@ -1034,7 +775,7 @@ CLEANFILES = $(noinst_DATA) all: all-recursive .SUFFIXES: -.SUFFIXES: .c .lo .log .o .obj .test .test$(EXEEXT) .trs +.SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ @@ -1068,18 +809,14 @@ $(am__aclocal_m4_deps): clean-noinstLTLIBRARIES: -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) - @list='$(noinst_LTLIBRARIES)'; \ - locs=`for p in $$list; do echo $$p; done | \ - sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \ - sort -u`; \ - test -z "$$locs" || { \ - echo rm -f $${locs}; \ - rm -f $${locs}; \ - } - + @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ + dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ + test "$$dir" != "$$p" || dir=.; \ + echo "rm -f \"$${dir}/so_locations\""; \ + rm -f "$${dir}/so_locations"; \ + done libdbus-testutils-internal.la: $(libdbus_testutils_internal_la_OBJECTS) $(libdbus_testutils_internal_la_DEPENDENCIES) $(EXTRA_libdbus_testutils_internal_la_DEPENDENCIES) $(AM_V_CCLD)$(LINK) $(libdbus_testutils_internal_la_OBJECTS) $(libdbus_testutils_internal_la_LIBADD) $(LIBS) - libdbus-testutils.la: $(libdbus_testutils_la_OBJECTS) $(libdbus_testutils_la_DEPENDENCIES) $(EXTRA_libdbus_testutils_la_DEPENDENCIES) $(AM_V_CCLD)$(LINK) $(am_libdbus_testutils_la_rpath) $(libdbus_testutils_la_OBJECTS) $(libdbus_testutils_la_LIBADD) $(LIBS) @@ -1100,12 +837,10 @@ install-testexecPROGRAMS: $(testexec_PROGRAMS) fi; \ for p in $$list; do echo "$$p $$p"; done | \ sed 's/$(EXEEXT)$$//' | \ - while read p p1; do if test -f $$p \ - || test -f $$p1 \ - ; then echo "$$p"; echo "$$p"; else :; fi; \ + while read p p1; do if test -f $$p || test -f $$p1; \ + then echo "$$p"; echo "$$p"; else :; fi; \ done | \ - sed -e 'p;s,.*/,,;n;h' \ - -e 's|.*|.|' \ + sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ @@ -1126,8 +861,7 @@ uninstall-testexecPROGRAMS: @list='$(testexec_PROGRAMS)'; test -n "$(testexecdir)" || list=; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ - -e 's/$$/$(EXEEXT)/' \ - `; \ + -e 's/$$/$(EXEEXT)/' `; \ test -n "$$list" || exit 0; \ echo " ( cd '$(DESTDIR)$(testexecdir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(testexecdir)" && rm -f $$files @@ -1140,79 +874,60 @@ clean-testexecPROGRAMS: list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list - manual-authz$(EXEEXT): $(manual_authz_OBJECTS) $(manual_authz_DEPENDENCIES) $(EXTRA_manual_authz_DEPENDENCIES) @rm -f manual-authz$(EXEEXT) $(AM_V_CCLD)$(LINK) $(manual_authz_OBJECTS) $(manual_authz_LDADD) $(LIBS) - shell-test$(EXEEXT): $(shell_test_OBJECTS) $(shell_test_DEPENDENCIES) $(EXTRA_shell_test_DEPENDENCIES) @rm -f shell-test$(EXEEXT) $(AM_V_CCLD)$(LINK) $(shell_test_OBJECTS) $(shell_test_LDADD) $(LIBS) - spawn-test$(EXEEXT): $(spawn_test_OBJECTS) $(spawn_test_DEPENDENCIES) $(EXTRA_spawn_test_DEPENDENCIES) @rm -f spawn-test$(EXEEXT) $(AM_V_CCLD)$(LINK) $(spawn_test_OBJECTS) $(spawn_test_LDADD) $(LIBS) - test-corrupt$(EXEEXT): $(test_corrupt_OBJECTS) $(test_corrupt_DEPENDENCIES) $(EXTRA_test_corrupt_DEPENDENCIES) @rm -f test-corrupt$(EXEEXT) $(AM_V_CCLD)$(LINK) $(test_corrupt_OBJECTS) $(test_corrupt_LDADD) $(LIBS) - test-dbus-daemon$(EXEEXT): $(test_dbus_daemon_OBJECTS) $(test_dbus_daemon_DEPENDENCIES) $(EXTRA_test_dbus_daemon_DEPENDENCIES) @rm -f test-dbus-daemon$(EXEEXT) $(AM_V_CCLD)$(LINK) $(test_dbus_daemon_OBJECTS) $(test_dbus_daemon_LDADD) $(LIBS) - test-dbus-daemon-eavesdrop$(EXEEXT): $(test_dbus_daemon_eavesdrop_OBJECTS) $(test_dbus_daemon_eavesdrop_DEPENDENCIES) $(EXTRA_test_dbus_daemon_eavesdrop_DEPENDENCIES) @rm -f test-dbus-daemon-eavesdrop$(EXEEXT) $(AM_V_CCLD)$(LINK) $(test_dbus_daemon_eavesdrop_OBJECTS) $(test_dbus_daemon_eavesdrop_LDADD) $(LIBS) - test-exit$(EXEEXT): $(test_exit_OBJECTS) $(test_exit_DEPENDENCIES) $(EXTRA_test_exit_DEPENDENCIES) @rm -f test-exit$(EXEEXT) $(AM_V_CCLD)$(LINK) $(test_exit_OBJECTS) $(test_exit_LDADD) $(LIBS) - test-loopback$(EXEEXT): $(test_loopback_OBJECTS) $(test_loopback_DEPENDENCIES) $(EXTRA_test_loopback_DEPENDENCIES) @rm -f test-loopback$(EXEEXT) $(AM_V_CCLD)$(LINK) $(test_loopback_OBJECTS) $(test_loopback_LDADD) $(LIBS) - test-marshal$(EXEEXT): $(test_marshal_OBJECTS) $(test_marshal_DEPENDENCIES) $(EXTRA_test_marshal_DEPENDENCIES) @rm -f test-marshal$(EXEEXT) $(AM_V_CCLD)$(LINK) $(test_marshal_OBJECTS) $(test_marshal_LDADD) $(LIBS) - test-names$(EXEEXT): $(test_names_OBJECTS) $(test_names_DEPENDENCIES) $(EXTRA_test_names_DEPENDENCIES) @rm -f test-names$(EXEEXT) $(AM_V_CCLD)$(LINK) $(test_names_OBJECTS) $(test_names_LDADD) $(LIBS) - test-printf$(EXEEXT): $(test_printf_OBJECTS) $(test_printf_DEPENDENCIES) $(EXTRA_test_printf_DEPENDENCIES) @rm -f test-printf$(EXEEXT) $(AM_V_CCLD)$(LINK) $(test_printf_OBJECTS) $(test_printf_LDADD) $(LIBS) - test-refs$(EXEEXT): $(test_refs_OBJECTS) $(test_refs_DEPENDENCIES) $(EXTRA_test_refs_DEPENDENCIES) @rm -f test-refs$(EXEEXT) $(AM_V_CCLD)$(LINK) $(test_refs_OBJECTS) $(test_refs_LDADD) $(LIBS) - test-relay$(EXEEXT): $(test_relay_OBJECTS) $(test_relay_DEPENDENCIES) $(EXTRA_test_relay_DEPENDENCIES) @rm -f test-relay$(EXEEXT) $(AM_V_CCLD)$(LINK) $(test_relay_OBJECTS) $(test_relay_LDADD) $(LIBS) - test-segfault$(EXEEXT): $(test_segfault_OBJECTS) $(test_segfault_DEPENDENCIES) $(EXTRA_test_segfault_DEPENDENCIES) @rm -f test-segfault$(EXEEXT) $(AM_V_CCLD)$(LINK) $(test_segfault_OBJECTS) $(test_segfault_LDADD) $(LIBS) - test-service$(EXEEXT): $(test_service_OBJECTS) $(test_service_DEPENDENCIES) $(EXTRA_test_service_DEPENDENCIES) @rm -f test-service$(EXEEXT) $(AM_V_CCLD)$(LINK) $(test_service_OBJECTS) $(test_service_LDADD) $(LIBS) - test-shell-service$(EXEEXT): $(test_shell_service_OBJECTS) $(test_shell_service_DEPENDENCIES) $(EXTRA_test_shell_service_DEPENDENCIES) @rm -f test-shell-service$(EXEEXT) $(AM_V_CCLD)$(LINK) $(test_shell_service_OBJECTS) $(test_shell_service_LDADD) $(LIBS) - test-sleep-forever$(EXEEXT): $(test_sleep_forever_OBJECTS) $(test_sleep_forever_DEPENDENCIES) $(EXTRA_test_sleep_forever_DEPENDENCIES) @rm -f test-sleep-forever$(EXEEXT) $(AM_V_CCLD)$(LINK) $(test_sleep_forever_OBJECTS) $(test_sleep_forever_LDADD) $(LIBS) - test-syntax$(EXEEXT): $(test_syntax_OBJECTS) $(test_syntax_DEPENDENCIES) $(EXTRA_test_syntax_DEPENDENCIES) @rm -f test-syntax$(EXEEXT) $(AM_V_CCLD)$(LINK) $(test_syntax_OBJECTS) $(test_syntax_LDADD) $(LIBS) - test-syslog$(EXEEXT): $(test_syslog_OBJECTS) $(test_syslog_DEPENDENCIES) $(EXTRA_test_syslog_DEPENDENCIES) @rm -f test-syslog$(EXEEXT) $(AM_V_CCLD)$(LINK) $(test_syslog_OBJECTS) $(test_syslog_LDADD) $(LIBS) @@ -1250,14 +965,14 @@ distclean-compile: @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @@ -1476,25 +1191,22 @@ clean-libtool: -rm -rf .libs _libs # This directory's subdirectories are mostly independent; you can cd -# into them and run 'make' without going through this Makefile. -# To change the values of 'make' variables: instead of editing Makefiles, -# (1) if the variable is set in 'config.status', edit 'config.status' -# (which will cause the Makefiles to be regenerated when you run 'make'); -# (2) otherwise, pass the desired values on the 'make' command line. -$(am__recursive_targets): - @fail=; \ - if $(am__make_keepgoing); then \ - failcom='fail=yes'; \ - else \ - failcom='exit 1'; \ - fi; \ +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @fail= failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - for subdir in $$list; do \ + list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ @@ -1509,12 +1221,57 @@ $(am__recursive_targets): $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-recursive -TAGS: tags +$(RECURSIVE_CLEAN_TARGETS): + @fail= failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ @@ -1530,7 +1287,12 @@ tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ - $(am__define_uniq_tagged_files); \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ @@ -1542,11 +1304,15 @@ tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $$unique; \ fi; \ fi -ctags: ctags-recursive - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique @@ -1555,285 +1321,102 @@ GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" -cscopelist: cscopelist-recursive - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -# Recover from deleted '.trs' file; this should ensure that -# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create -# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells -# to avoid problems with "make -n". -.log.trs: - rm -f $< $@ - $(MAKE) $(AM_MAKEFLAGS) $< - -# Leading 'am--fnord' is there to ensure the list of targets does not -# expand to empty, as could happen e.g. with make check TESTS=''. -am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) -am--force-recheck: - @: - -$(TEST_SUITE_LOG): $(TEST_LOGS) - @$(am__set_TESTS_bases); \ - am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ - redo_bases=`for i in $$bases; do \ - am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \ - done`; \ - if test -n "$$redo_bases"; then \ - redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \ - redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \ - if $(am__make_dryrun); then :; else \ - rm -f $$redo_logs && rm -f $$redo_results || exit 1; \ - fi; \ - fi; \ - if test -n "$$am__remaking_logs"; then \ - echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ - "recursion detected" >&2; \ - else \ - am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ - fi; \ - if $(am__make_dryrun); then :; else \ - st=0; \ - errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \ - for i in $$redo_bases; do \ - test -f $$i.trs && test -r $$i.trs \ - || { echo "$$errmsg $$i.trs" >&2; st=1; }; \ - test -f $$i.log && test -r $$i.log \ - || { echo "$$errmsg $$i.log" >&2; st=1; }; \ +check-TESTS: $(TESTS) + @failed=0; all=0; xfail=0; xpass=0; skip=0; \ + srcdir=$(srcdir); export srcdir; \ + list=' $(TESTS) '; \ + $(am__tty_colors); \ + if test -n "$$list"; then \ + for tst in $$list; do \ + if test -f ./$$tst; then dir=./; \ + elif test -f $$tst; then dir=; \ + else dir="$(srcdir)/"; fi; \ + if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ + all=`expr $$all + 1`; \ + case " $(XFAIL_TESTS) " in \ + *[\ \ ]$$tst[\ \ ]*) \ + xpass=`expr $$xpass + 1`; \ + failed=`expr $$failed + 1`; \ + col=$$red; res=XPASS; \ + ;; \ + *) \ + col=$$grn; res=PASS; \ + ;; \ + esac; \ + elif test $$? -ne 77; then \ + all=`expr $$all + 1`; \ + case " $(XFAIL_TESTS) " in \ + *[\ \ ]$$tst[\ \ ]*) \ + xfail=`expr $$xfail + 1`; \ + col=$$lgn; res=XFAIL; \ + ;; \ + *) \ + failed=`expr $$failed + 1`; \ + col=$$red; res=FAIL; \ + ;; \ + esac; \ + else \ + skip=`expr $$skip + 1`; \ + col=$$blu; res=SKIP; \ + fi; \ + echo "$${col}$$res$${std}: $$tst"; \ done; \ - test $$st -eq 0 || exit 1; \ - fi - @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \ - ws='[ ]'; \ - results=`for b in $$bases; do echo $$b.trs; done`; \ - test -n "$$results" || results=/dev/null; \ - all=` grep "^$$ws*:test-result:" $$results | wc -l`; \ - pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \ - fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \ - skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \ - xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \ - xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \ - error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \ - if test `expr $$fail + $$xpass + $$error` -eq 0; then \ - success=true; \ - else \ - success=false; \ - fi; \ - br='==================='; br=$$br$$br$$br$$br; \ - result_count () \ - { \ - if test x"$$1" = x"--maybe-color"; then \ - maybe_colorize=yes; \ - elif test x"$$1" = x"--no-color"; then \ - maybe_colorize=no; \ + if test "$$all" -eq 1; then \ + tests="test"; \ + All=""; \ + else \ + tests="tests"; \ + All="All "; \ + fi; \ + if test "$$failed" -eq 0; then \ + if test "$$xfail" -eq 0; then \ + banner="$$All$$all $$tests passed"; \ + else \ + if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \ + banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \ + fi; \ + else \ + if test "$$xpass" -eq 0; then \ + banner="$$failed of $$all $$tests failed"; \ else \ - echo "$@: invalid 'result_count' usage" >&2; exit 4; \ + if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \ + banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \ fi; \ - shift; \ - desc=$$1 count=$$2; \ - if test $$maybe_colorize = yes && test $$count -gt 0; then \ - color_start=$$3 color_end=$$std; \ + fi; \ + dashes="$$banner"; \ + skipped=""; \ + if test "$$skip" -ne 0; then \ + if test "$$skip" -eq 1; then \ + skipped="($$skip test was not run)"; \ else \ - color_start= color_end=; \ + skipped="($$skip tests were not run)"; \ fi; \ - echo "$${color_start}# $$desc $$count$${color_end}"; \ - }; \ - create_testsuite_report () \ - { \ - result_count $$1 "TOTAL:" $$all "$$brg"; \ - result_count $$1 "PASS: " $$pass "$$grn"; \ - result_count $$1 "SKIP: " $$skip "$$blu"; \ - result_count $$1 "XFAIL:" $$xfail "$$lgn"; \ - result_count $$1 "FAIL: " $$fail "$$red"; \ - result_count $$1 "XPASS:" $$xpass "$$red"; \ - result_count $$1 "ERROR:" $$error "$$mgn"; \ - }; \ - { \ - echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ - $(am__rst_title); \ - create_testsuite_report --no-color; \ - echo; \ - echo ".. contents:: :depth: 2"; \ - echo; \ - for b in $$bases; do echo $$b; done \ - | $(am__create_global_log); \ - } >$(TEST_SUITE_LOG).tmp || exit 1; \ - mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ - if $$success; then \ - col="$$grn"; \ - else \ - col="$$red"; \ - test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \ - fi; \ - echo "$${col}$$br$${std}"; \ - echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \ - echo "$${col}$$br$${std}"; \ - create_testsuite_report --maybe-color; \ - echo "$$col$$br$$std"; \ - if $$success; then :; else \ - echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ - if test -n "$(PACKAGE_BUGREPORT)"; then \ - echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ - fi; \ - echo "$$col$$br$$std"; \ - fi; \ - $$success || exit 1 - -check-TESTS: - @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list - @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list - @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) - @set +e; $(am__set_TESTS_bases); \ - log_list=`for i in $$bases; do echo $$i.log; done`; \ - trs_list=`for i in $$bases; do echo $$i.trs; done`; \ - log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \ - $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \ - exit $$?; -recheck: all - @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) - @set +e; $(am__set_TESTS_bases); \ - bases=`for i in $$bases; do echo $$i; done \ - | $(am__list_recheck_tests)` || exit 1; \ - log_list=`for i in $$bases; do echo $$i.log; done`; \ - log_list=`echo $$log_list`; \ - $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \ - am__force_recheck=am--force-recheck \ - TEST_LOGS="$$log_list"; \ - exit $$? -shell-test.log: shell-test$(EXEEXT) - @p='shell-test$(EXEEXT)'; \ - b='shell-test'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -test-printf.log: test-printf$(EXEEXT) - @p='test-printf$(EXEEXT)'; \ - b='test-printf'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -test-corrupt.log: test-corrupt$(EXEEXT) - @p='test-corrupt$(EXEEXT)'; \ - b='test-corrupt'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -test-dbus-daemon.log: test-dbus-daemon$(EXEEXT) - @p='test-dbus-daemon$(EXEEXT)'; \ - b='test-dbus-daemon'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -test-dbus-daemon-eavesdrop.log: test-dbus-daemon-eavesdrop$(EXEEXT) - @p='test-dbus-daemon-eavesdrop$(EXEEXT)'; \ - b='test-dbus-daemon-eavesdrop'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -test-loopback.log: test-loopback$(EXEEXT) - @p='test-loopback$(EXEEXT)'; \ - b='test-loopback'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -test-marshal.log: test-marshal$(EXEEXT) - @p='test-marshal$(EXEEXT)'; \ - b='test-marshal'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -test-refs.log: test-refs$(EXEEXT) - @p='test-refs$(EXEEXT)'; \ - b='test-refs'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -test-relay.log: test-relay$(EXEEXT) - @p='test-relay$(EXEEXT)'; \ - b='test-relay'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -test-syntax.log: test-syntax$(EXEEXT) - @p='test-syntax$(EXEEXT)'; \ - b='test-syntax'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -test-syslog.log: test-syslog$(EXEEXT) - @p='test-syslog$(EXEEXT)'; \ - b='test-syslog'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -../bus/bus-test.log: ../bus/bus-test$(EXEEXT) - @p='../bus/bus-test$(EXEEXT)'; \ - b='../bus/bus-test'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -../bus/bus-test-system.log: ../bus/bus-test-system$(EXEEXT) - @p='../bus/bus-test-system$(EXEEXT)'; \ - b='../bus/bus-test-system'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -../dbus/dbus-test.log: ../dbus/dbus-test$(EXEEXT) - @p='../dbus/dbus-test$(EXEEXT)'; \ - b='../dbus/dbus-test'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -../bus/bus-test-launch-helper.log: ../bus/bus-test-launch-helper$(EXEEXT) - @p='../bus/bus-test-launch-helper$(EXEEXT)'; \ - b='../bus/bus-test-launch-helper'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -.test.log: - @p='$<'; \ - $(am__set_b); \ - $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -@am__EXEEXT_TRUE@.test$(EXEEXT).log: -@am__EXEEXT_TRUE@ @p='$<'; \ -@am__EXEEXT_TRUE@ $(am__set_b); \ -@am__EXEEXT_TRUE@ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ -@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \ -@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ -@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT) + test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ + dashes="$$skipped"; \ + fi; \ + report=""; \ + if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ + report="Please report to $(PACKAGE_BUGREPORT)"; \ + test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ + dashes="$$report"; \ + fi; \ + dashes=`echo "$$dashes" | sed s/./=/g`; \ + if test "$$failed" -eq 0; then \ + col="$$grn"; \ + else \ + col="$$red"; \ + fi; \ + echo "$${col}$$dashes$${std}"; \ + echo "$${col}$$banner$${std}"; \ + test -z "$$skipped" || echo "$${col}$$skipped$${std}"; \ + test -z "$$report" || echo "$${col}$$report$${std}"; \ + echo "$${col}$$dashes$${std}"; \ + test "$$failed" -eq 0; \ + else :; fi distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ @@ -1919,9 +1502,6 @@ install-strip: "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: - -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS) - -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs) - -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) @@ -2005,12 +1585,14 @@ ps-am: uninstall-am: uninstall-testexecPROGRAMS -.MAKE: $(am__recursive_targets) check-am install-am install-strip +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) check-am \ + ctags-recursive install-am install-strip tags-recursive -.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \ - check check-TESTS check-am clean clean-generic clean-libtool \ - clean-local clean-noinstLTLIBRARIES clean-noinstPROGRAMS \ - clean-testexecPROGRAMS cscopelist-am ctags ctags-am distclean \ +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am all-local check check-TESTS check-am clean \ + clean-generic clean-libtool clean-local \ + clean-noinstLTLIBRARIES clean-noinstPROGRAMS \ + clean-testexecPROGRAMS ctags ctags-recursive distclean \ distclean-compile distclean-generic distclean-libtool \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ @@ -2021,8 +1603,8 @@ uninstall-am: uninstall-testexecPROGRAMS installcheck-am installcheck-local installdirs installdirs-am \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ - pdf pdf-am ps ps-am recheck tags tags-am uninstall \ - uninstall-am uninstall-testexecPROGRAMS + pdf pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \ + uninstall-testexecPROGRAMS # If we're installing the tests into a DESTDIR we can't run them diff --git a/test/data/valid-config-files/incoming-limit.conf b/test/data/valid-config-files/incoming-limit.conf.in index abfab3f7..40ff2244 100644 --- a/test/data/valid-config-files/incoming-limit.conf +++ b/test/data/valid-config-files/incoming-limit.conf.in @@ -3,7 +3,7 @@ <busconfig> <!-- Our well-known bus type, don't change this --> <type>session</type> - <listen>unix:tmpdir=/tmp</listen> + <listen>@TEST_LISTEN@</listen> <policy context="default"> <!-- Allow everything to be sent --> diff --git a/test/name-test/Makefile.in b/test/name-test/Makefile.in index bfe2706c..089c7adb 100644 --- a/test/name-test/Makefile.in +++ b/test/name-test/Makefile.in @@ -1,8 +1,9 @@ -# Makefile.in generated by automake 1.14 from Makefile.am. +# Makefile.in generated by automake 1.11.6 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2013 Free Software Foundation, Inc. - +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software +# Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -15,51 +16,23 @@ @SET_MAKE@ VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ +am__make_dryrun = \ + { \ + am__dry=no; \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ + echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ + | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ + *) \ + for am__flg in $$MAKEFLAGS; do \ + case $$am__flg in \ + *=*|--*) ;; \ + *n*) am__dry=yes; break;; \ + esac; \ + done;; \ esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) + test $$am__dry = yes; \ + } pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ @@ -89,8 +62,7 @@ host_triplet = @host@ @DBUS_ENABLE_EMBEDDED_TESTS_TRUE@ test-privserver-client$(EXEEXT) \ @DBUS_ENABLE_EMBEDDED_TESTS_TRUE@ test-autolaunch$(EXEEXT) subdir = test/name-test -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/depcomp $(top_srcdir)/test-driver +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/as-ac-expand.m4 \ $(top_srcdir)/m4/compiler.m4 $(top_srcdir)/m4/libtool.m4 \ @@ -112,7 +84,6 @@ test_autolaunch_OBJECTS = test-autolaunch.$(OBJEXT) AM_V_lt = $(am__v_lt_@AM_V@) am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) am__v_lt_0 = --silent -am__v_lt_1 = test_ids_SOURCES = test-ids.c test_ids_OBJECTS = test-ids.$(OBJEXT) @DBUS_ENABLE_EMBEDDED_TESTS_TRUE@test_ids_DEPENDENCIES = $(top_builddir)/dbus/libdbus-internal.la @@ -136,18 +107,6 @@ test_shutdown_OBJECTS = test-shutdown.$(OBJEXT) test_threads_init_SOURCES = test-threads-init.c test_threads_init_OBJECTS = test-threads-init.$(OBJEXT) @DBUS_ENABLE_EMBEDDED_TESTS_TRUE@test_threads_init_DEPENDENCIES = $(top_builddir)/dbus/libdbus-internal.la -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles @@ -160,16 +119,20 @@ LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ $(AM_CFLAGS) $(CFLAGS) AM_V_CC = $(am__v_CC_@AM_V@) am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) -am__v_CC_0 = @echo " CC " $@; -am__v_CC_1 = +am__v_CC_0 = @echo " CC " $@; +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ CCLD = $(CC) LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ AM_V_CCLD = $(am__v_CCLD_@AM_V@) am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) -am__v_CCLD_0 = @echo " CCLD " $@; -am__v_CCLD_1 = +am__v_CCLD_0 = @echo " CCLD " $@; +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; SOURCES = test-autolaunch.c test-ids.c test-pending-call-dispatch.c \ test-pending-call-timeout.c test-privserver.c \ test-privserver-client.c test-shutdown.c test-threads-init.c @@ -182,229 +145,10 @@ am__can_run_installinfo = \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags -am__tty_colors_dummy = \ - mgn= red= grn= lgn= blu= brg= std=; \ - am__color_tests=no -am__tty_colors = { \ - $(am__tty_colors_dummy); \ - if test "X$(AM_COLOR_TESTS)" = Xno; then \ - am__color_tests=no; \ - elif test "X$(AM_COLOR_TESTS)" = Xalways; then \ - am__color_tests=yes; \ - elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \ - am__color_tests=yes; \ - fi; \ - if test $$am__color_tests = yes; then \ - red='[0;31m'; \ - grn='[0;32m'; \ - lgn='[1;32m'; \ - blu='[1;34m'; \ - mgn='[0;35m'; \ - brg='[1m'; \ - std='[m'; \ - fi; \ -} -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -am__recheck_rx = ^[ ]*:recheck:[ ]* -am__global_test_result_rx = ^[ ]*:global-test-result:[ ]* -am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]* -# A command that, given a newline-separated list of test names on the -# standard input, print the name of the tests that are to be re-run -# upon "make recheck". -am__list_recheck_tests = $(AWK) '{ \ - recheck = 1; \ - while ((rc = (getline line < ($$0 ".trs"))) != 0) \ - { \ - if (rc < 0) \ - { \ - if ((getline line2 < ($$0 ".log")) < 0) \ - recheck = 0; \ - break; \ - } \ - else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \ - { \ - recheck = 0; \ - break; \ - } \ - else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \ - { \ - break; \ - } \ - }; \ - if (recheck) \ - print $$0; \ - close ($$0 ".trs"); \ - close ($$0 ".log"); \ -}' -# A command that, given a newline-separated list of test names on the -# standard input, create the global log from their .trs and .log files. -am__create_global_log = $(AWK) ' \ -function fatal(msg) \ -{ \ - print "fatal: making $@: " msg | "cat >&2"; \ - exit 1; \ -} \ -function rst_section(header) \ -{ \ - print header; \ - len = length(header); \ - for (i = 1; i <= len; i = i + 1) \ - printf "="; \ - printf "\n\n"; \ -} \ -{ \ - copy_in_global_log = 1; \ - global_test_result = "RUN"; \ - while ((rc = (getline line < ($$0 ".trs"))) != 0) \ - { \ - if (rc < 0) \ - fatal("failed to read from " $$0 ".trs"); \ - if (line ~ /$(am__global_test_result_rx)/) \ - { \ - sub("$(am__global_test_result_rx)", "", line); \ - sub("[ ]*$$", "", line); \ - global_test_result = line; \ - } \ - else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \ - copy_in_global_log = 0; \ - }; \ - if (copy_in_global_log) \ - { \ - rst_section(global_test_result ": " $$0); \ - while ((rc = (getline line < ($$0 ".log"))) != 0) \ - { \ - if (rc < 0) \ - fatal("failed to read from " $$0 ".log"); \ - print line; \ - }; \ - printf "\n"; \ - }; \ - close ($$0 ".trs"); \ - close ($$0 ".log"); \ -}' -# Restructured Text title. -am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; } -# Solaris 10 'make', and several other traditional 'make' implementations, -# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it -# by disabling -e (using the XSI extension "set +e") if it's set. -am__sh_e_setup = case $$- in *e*) set +e;; esac -# Default flags passed to test drivers. -am__common_driver_flags = \ - --color-tests "$$am__color_tests" \ - --enable-hard-errors "$$am__enable_hard_errors" \ - --expect-failure "$$am__expect_failure" -# To be inserted before the command running the test. Creates the -# directory for the log if needed. Stores in $dir the directory -# containing $f, in $tst the test, in $log the log. Executes the -# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and -# passes TESTS_ENVIRONMENT. Set up options for the wrapper that -# will run the test scripts (or their associated LOG_COMPILER, if -# thy have one). -am__check_pre = \ -$(am__sh_e_setup); \ -$(am__vpath_adj_setup) $(am__vpath_adj) \ -$(am__tty_colors); \ -srcdir=$(srcdir); export srcdir; \ -case "$@" in \ - */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \ - *) am__odir=.;; \ -esac; \ -test "x$$am__odir" = x"." || test -d "$$am__odir" \ - || $(MKDIR_P) "$$am__odir" || exit $$?; \ -if test -f "./$$f"; then dir=./; \ -elif test -f "$$f"; then dir=; \ -else dir="$(srcdir)/"; fi; \ -tst=$$dir$$f; log='$@'; \ -if test -n '$(DISABLE_HARD_ERRORS)'; then \ - am__enable_hard_errors=no; \ -else \ - am__enable_hard_errors=yes; \ -fi; \ -case " $(XFAIL_TESTS) " in \ - *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \ - am__expect_failure=yes;; \ - *) \ - am__expect_failure=no;; \ -esac; \ -$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT) -# A shell command to get the names of the tests scripts with any registered -# extension removed (i.e., equivalently, the names of the test logs, with -# the '.log' extension removed). The result is saved in the shell variable -# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly, -# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)", -# since that might cause problem with VPATH rewrites for suffix-less tests. -# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'. -am__set_TESTS_bases = \ - bases='$(TEST_LOGS)'; \ - bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \ - bases=`echo $$bases` -RECHECK_LOGS = $(TEST_LOGS) -AM_RECURSIVE_TARGETS = check recheck -TEST_SUITE_LOG = test-suite.log -TEST_EXTENSIONS = @EXEEXT@ .test -LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver -LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS) -am__set_b = \ - case '$@' in \ - */*) \ - case '$*' in \ - */*) b='$*';; \ - *) b=`echo '$@' | sed 's/\.log$$//'`; \ - esac;; \ - *) \ - b='$*';; \ - esac -am__test_logs1 = $(TESTS:=.log) -am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log) -TEST_LOGS = $(am__test_logs2:.test.log=.log) -TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver -TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \ - $(TEST_LOG_FLAGS) +am__tty_colors = \ +red=; grn=; lgn=; blu=; std= DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ADT_LIBS = @ADT_LIBS@ @@ -643,7 +387,7 @@ EXTRA_DIST = run-test.sh run-test-systemserver.sh test-wait-for-echo.py test-act all: all-am .SUFFIXES: -.SUFFIXES: .c .lo .log .o .obj .test .test$(EXEEXT) .trs +.SUFFIXES: .c .lo .o .obj $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ @@ -683,35 +427,27 @@ clean-noinstPROGRAMS: list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ echo " rm -f" $$list; \ rm -f $$list - test-autolaunch$(EXEEXT): $(test_autolaunch_OBJECTS) $(test_autolaunch_DEPENDENCIES) $(EXTRA_test_autolaunch_DEPENDENCIES) @rm -f test-autolaunch$(EXEEXT) $(AM_V_CCLD)$(LINK) $(test_autolaunch_OBJECTS) $(test_autolaunch_LDADD) $(LIBS) - test-ids$(EXEEXT): $(test_ids_OBJECTS) $(test_ids_DEPENDENCIES) $(EXTRA_test_ids_DEPENDENCIES) @rm -f test-ids$(EXEEXT) $(AM_V_CCLD)$(LINK) $(test_ids_OBJECTS) $(test_ids_LDADD) $(LIBS) - test-pending-call-dispatch$(EXEEXT): $(test_pending_call_dispatch_OBJECTS) $(test_pending_call_dispatch_DEPENDENCIES) $(EXTRA_test_pending_call_dispatch_DEPENDENCIES) @rm -f test-pending-call-dispatch$(EXEEXT) $(AM_V_CCLD)$(LINK) $(test_pending_call_dispatch_OBJECTS) $(test_pending_call_dispatch_LDADD) $(LIBS) - test-pending-call-timeout$(EXEEXT): $(test_pending_call_timeout_OBJECTS) $(test_pending_call_timeout_DEPENDENCIES) $(EXTRA_test_pending_call_timeout_DEPENDENCIES) @rm -f test-pending-call-timeout$(EXEEXT) $(AM_V_CCLD)$(LINK) $(test_pending_call_timeout_OBJECTS) $(test_pending_call_timeout_LDADD) $(LIBS) - test-privserver$(EXEEXT): $(test_privserver_OBJECTS) $(test_privserver_DEPENDENCIES) $(EXTRA_test_privserver_DEPENDENCIES) @rm -f test-privserver$(EXEEXT) $(AM_V_CCLD)$(LINK) $(test_privserver_OBJECTS) $(test_privserver_LDADD) $(LIBS) - test-privserver-client$(EXEEXT): $(test_privserver_client_OBJECTS) $(test_privserver_client_DEPENDENCIES) $(EXTRA_test_privserver_client_DEPENDENCIES) @rm -f test-privserver-client$(EXEEXT) $(AM_V_CCLD)$(LINK) $(test_privserver_client_OBJECTS) $(test_privserver_client_LDADD) $(LIBS) - test-shutdown$(EXEEXT): $(test_shutdown_OBJECTS) $(test_shutdown_DEPENDENCIES) $(EXTRA_test_shutdown_DEPENDENCIES) @rm -f test-shutdown$(EXEEXT) $(AM_V_CCLD)$(LINK) $(test_shutdown_OBJECTS) $(test_shutdown_LDADD) $(LIBS) - test-threads-init$(EXEEXT): $(test_threads_init_OBJECTS) $(test_threads_init_DEPENDENCIES) $(EXTRA_test_threads_init_DEPENDENCIES) @rm -f test-threads-init$(EXEEXT) $(AM_V_CCLD)$(LINK) $(test_threads_init_OBJECTS) $(test_threads_init_LDADD) $(LIBS) @@ -736,14 +472,14 @@ distclean-compile: @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c $< .c.obj: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'` .c.lo: @am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @@ -758,15 +494,26 @@ mostlyclean-libtool: clean-libtool: -rm -rf .libs _libs -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-am -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) set x; \ here=`pwd`; \ - $(am__define_uniq_tagged_files); \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ @@ -778,11 +525,15 @@ tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $$unique; \ fi; \ fi -ctags: ctags-am - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique @@ -791,194 +542,102 @@ GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" -cscopelist: cscopelist-am - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -# Recover from deleted '.trs' file; this should ensure that -# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create -# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells -# to avoid problems with "make -n". -.log.trs: - rm -f $< $@ - $(MAKE) $(AM_MAKEFLAGS) $< - -# Leading 'am--fnord' is there to ensure the list of targets does not -# expand to empty, as could happen e.g. with make check TESTS=''. -am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) -am--force-recheck: - @: - -$(TEST_SUITE_LOG): $(TEST_LOGS) - @$(am__set_TESTS_bases); \ - am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ - redo_bases=`for i in $$bases; do \ - am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \ - done`; \ - if test -n "$$redo_bases"; then \ - redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \ - redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \ - if $(am__make_dryrun); then :; else \ - rm -f $$redo_logs && rm -f $$redo_results || exit 1; \ - fi; \ - fi; \ - if test -n "$$am__remaking_logs"; then \ - echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ - "recursion detected" >&2; \ - else \ - am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ - fi; \ - if $(am__make_dryrun); then :; else \ - st=0; \ - errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \ - for i in $$redo_bases; do \ - test -f $$i.trs && test -r $$i.trs \ - || { echo "$$errmsg $$i.trs" >&2; st=1; }; \ - test -f $$i.log && test -r $$i.log \ - || { echo "$$errmsg $$i.log" >&2; st=1; }; \ +check-TESTS: $(TESTS) + @failed=0; all=0; xfail=0; xpass=0; skip=0; \ + srcdir=$(srcdir); export srcdir; \ + list=' $(TESTS) '; \ + $(am__tty_colors); \ + if test -n "$$list"; then \ + for tst in $$list; do \ + if test -f ./$$tst; then dir=./; \ + elif test -f $$tst; then dir=; \ + else dir="$(srcdir)/"; fi; \ + if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ + all=`expr $$all + 1`; \ + case " $(XFAIL_TESTS) " in \ + *[\ \ ]$$tst[\ \ ]*) \ + xpass=`expr $$xpass + 1`; \ + failed=`expr $$failed + 1`; \ + col=$$red; res=XPASS; \ + ;; \ + *) \ + col=$$grn; res=PASS; \ + ;; \ + esac; \ + elif test $$? -ne 77; then \ + all=`expr $$all + 1`; \ + case " $(XFAIL_TESTS) " in \ + *[\ \ ]$$tst[\ \ ]*) \ + xfail=`expr $$xfail + 1`; \ + col=$$lgn; res=XFAIL; \ + ;; \ + *) \ + failed=`expr $$failed + 1`; \ + col=$$red; res=FAIL; \ + ;; \ + esac; \ + else \ + skip=`expr $$skip + 1`; \ + col=$$blu; res=SKIP; \ + fi; \ + echo "$${col}$$res$${std}: $$tst"; \ done; \ - test $$st -eq 0 || exit 1; \ - fi - @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \ - ws='[ ]'; \ - results=`for b in $$bases; do echo $$b.trs; done`; \ - test -n "$$results" || results=/dev/null; \ - all=` grep "^$$ws*:test-result:" $$results | wc -l`; \ - pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \ - fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \ - skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \ - xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \ - xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \ - error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \ - if test `expr $$fail + $$xpass + $$error` -eq 0; then \ - success=true; \ - else \ - success=false; \ - fi; \ - br='==================='; br=$$br$$br$$br$$br; \ - result_count () \ - { \ - if test x"$$1" = x"--maybe-color"; then \ - maybe_colorize=yes; \ - elif test x"$$1" = x"--no-color"; then \ - maybe_colorize=no; \ + if test "$$all" -eq 1; then \ + tests="test"; \ + All=""; \ + else \ + tests="tests"; \ + All="All "; \ + fi; \ + if test "$$failed" -eq 0; then \ + if test "$$xfail" -eq 0; then \ + banner="$$All$$all $$tests passed"; \ + else \ + if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \ + banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \ + fi; \ + else \ + if test "$$xpass" -eq 0; then \ + banner="$$failed of $$all $$tests failed"; \ else \ - echo "$@: invalid 'result_count' usage" >&2; exit 4; \ + if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \ + banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \ fi; \ - shift; \ - desc=$$1 count=$$2; \ - if test $$maybe_colorize = yes && test $$count -gt 0; then \ - color_start=$$3 color_end=$$std; \ + fi; \ + dashes="$$banner"; \ + skipped=""; \ + if test "$$skip" -ne 0; then \ + if test "$$skip" -eq 1; then \ + skipped="($$skip test was not run)"; \ else \ - color_start= color_end=; \ + skipped="($$skip tests were not run)"; \ fi; \ - echo "$${color_start}# $$desc $$count$${color_end}"; \ - }; \ - create_testsuite_report () \ - { \ - result_count $$1 "TOTAL:" $$all "$$brg"; \ - result_count $$1 "PASS: " $$pass "$$grn"; \ - result_count $$1 "SKIP: " $$skip "$$blu"; \ - result_count $$1 "XFAIL:" $$xfail "$$lgn"; \ - result_count $$1 "FAIL: " $$fail "$$red"; \ - result_count $$1 "XPASS:" $$xpass "$$red"; \ - result_count $$1 "ERROR:" $$error "$$mgn"; \ - }; \ - { \ - echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ - $(am__rst_title); \ - create_testsuite_report --no-color; \ - echo; \ - echo ".. contents:: :depth: 2"; \ - echo; \ - for b in $$bases; do echo $$b; done \ - | $(am__create_global_log); \ - } >$(TEST_SUITE_LOG).tmp || exit 1; \ - mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ - if $$success; then \ - col="$$grn"; \ - else \ - col="$$red"; \ - test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \ - fi; \ - echo "$${col}$$br$${std}"; \ - echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \ - echo "$${col}$$br$${std}"; \ - create_testsuite_report --maybe-color; \ - echo "$$col$$br$$std"; \ - if $$success; then :; else \ - echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ - if test -n "$(PACKAGE_BUGREPORT)"; then \ - echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ - fi; \ - echo "$$col$$br$$std"; \ - fi; \ - $$success || exit 1 - -check-TESTS: - @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list - @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list - @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) - @set +e; $(am__set_TESTS_bases); \ - log_list=`for i in $$bases; do echo $$i.log; done`; \ - trs_list=`for i in $$bases; do echo $$i.trs; done`; \ - log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \ - $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \ - exit $$?; -recheck: all - @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) - @set +e; $(am__set_TESTS_bases); \ - bases=`for i in $$bases; do echo $$i; done \ - | $(am__list_recheck_tests)` || exit 1; \ - log_list=`for i in $$bases; do echo $$i.log; done`; \ - log_list=`echo $$log_list`; \ - $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \ - am__force_recheck=am--force-recheck \ - TEST_LOGS="$$log_list"; \ - exit $$? -run-test.sh.log: run-test.sh - @p='run-test.sh'; \ - b='run-test.sh'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -run-test-systemserver.sh.log: run-test-systemserver.sh - @p='run-test-systemserver.sh'; \ - b='run-test-systemserver.sh'; \ - $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -.test.log: - @p='$<'; \ - $(am__set_b); \ - $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -@am__EXEEXT_TRUE@.test$(EXEEXT).log: -@am__EXEEXT_TRUE@ @p='$<'; \ -@am__EXEEXT_TRUE@ $(am__set_b); \ -@am__EXEEXT_TRUE@ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ -@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \ -@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ -@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT) + test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ + dashes="$$skipped"; \ + fi; \ + report=""; \ + if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ + report="Please report to $(PACKAGE_BUGREPORT)"; \ + test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ + dashes="$$report"; \ + fi; \ + dashes=`echo "$$dashes" | sed s/./=/g`; \ + if test "$$failed" -eq 0; then \ + col="$$grn"; \ + else \ + col="$$red"; \ + fi; \ + echo "$${col}$$dashes$${std}"; \ + echo "$${col}$$banner$${std}"; \ + test -z "$$skipped" || echo "$${col}$$skipped$${std}"; \ + test -z "$$report" || echo "$${col}$$report$${std}"; \ + echo "$${col}$$dashes$${std}"; \ + test "$$failed" -eq 0; \ + else :; fi distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ @@ -1035,9 +694,6 @@ install-strip: "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: - -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS) - -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs) - -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) clean-generic: @@ -1121,9 +777,9 @@ uninstall-am: .MAKE: check-am install-am install-strip -.PHONY: CTAGS GTAGS TAGS all all-am check check-TESTS check-am clean \ - clean-generic clean-libtool clean-noinstPROGRAMS cscopelist-am \ - ctags ctags-am distclean distclean-compile distclean-generic \ +.PHONY: CTAGS GTAGS all all-am check check-TESTS check-am clean \ + clean-generic clean-libtool clean-noinstPROGRAMS ctags \ + distclean distclean-compile distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dvi install-dvi-am install-exec \ @@ -1133,7 +789,7 @@ uninstall-am: installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - recheck tags tags-am uninstall uninstall-am + tags uninstall uninstall-am # Tell versions [3.59,3.63) of GNU make to not export all variables. diff --git a/test/spawn-test.c b/test/spawn-test.c index e6513fa6..723a4889 100644 --- a/test/spawn-test.c +++ b/test/spawn-test.c @@ -30,7 +30,7 @@ main (int argc, char **argv) argv_copy [i] = argv[i + 1]; argv_copy[argc - 1] = NULL; - if (!_dbus_spawn_async_with_babysitter (NULL, argv_copy, NULL, setup_func, NULL, &error)) + if (!_dbus_spawn_async_with_babysitter (NULL, argv_copy[0], argv_copy, NULL, setup_func, NULL, &error)) { fprintf (stderr, "Could not launch application: \"%s\"\n", error.message); |