No longer generate helpmsgs.{cc,h}.

1 files changed, 188 insertions, 0 deletions

diff --git a/dselect/helpmsgs.cc b/dselect/helpmsgs.cc
new file mode 100644
index 000000000..f9c110c94
--- /dev/null
+++ b/dselect/helpmsgs.cc
@@ -0,0 +1,188 @@
+/*
+ * WARNING - THIS FILE IS GENERATED AUTOMATICALLY - DO NOT EDIT
+ * It is generated by mkhelpmsgs.pl from helpmsgs.src.
+ */
+
+#include "helpmsgs.h"
+const struct helpmessage hlp_listkeys = {
+  N_("Keystrokes"), N_("\
+Motion keys: Next/Previous, Top/End, Up/Down, Backwards/Forwards:\n\
+  n, Down-arrow, j      p, Up-arrow, k          move highlight\n\
+  N, Page-down, Space   P, Page-up, Backspace   scroll list by 1 page\n\
+  ^n                    ^p                      scroll list by 1 line\n\
+  t, Home               e, End                  jump to top/end of list\n\
+  u                     d                       scroll info by 1 page\n\
+  ^u                    ^d                      scroll info by 1 line\n\
+  B, Left-arrow         F, Right-arrow          pan display by 1/3 screen\n\
+  ^b                    ^f                      pan display by 1 character\n\n\
+\
+Mark packages for later processing:\n\
+ +, Insert  install or upgrade      =, H  hold in present state\n\
+ -, Delete  remove                  :, G  unhold: upgrade or leave uninstalled\n\
+ _          remove & purge config\n\
+                                             Miscellaneous:\n\
+Quit, exit, overwrite (note capitals!):       ?, F1 request help (also Help)\n\
+ Return  Confirm, quit (check dependencies)   i, I  toggle/cycle info displays\n\
+   Q     Confirm, quit (override dep.s)       o, O  cycle through sort options\n\
+ X, Esc  eXit, abandoning any changes made    v, V  change status display opts\n\
+   R     Revert to state before this list      ^l   redraw display\n\
+   U     set all to sUggested state             /   search (Return to cancel)\n\
+   D     set all to Directly requested state    \\   repeat last search\n")
+};
+const struct helpmessage hlp_mainintro = {
+  N_("Introduction to package selections"), N_("\
+Welcome to dselect's main package listing.\n\n\
+\
+You will be presented with a list of packages which are installed or available\n\
+for installation.  You can navigate around the list using the cursor keys,\n\
+mark packages for installation (using `+') or deinstallation (using `-').\n\
+Packages can be marked either singly or in groups; initially you will see that\n\
+the line `All packages' is selected.  `+', `-' and so on will affect all the\n\
+packages described by the highlighted line.\n\n\
+\
+Some of your choices will cause conflicts or dependency problems; you will be\n\
+given a sub-list of the relevant packages, so that you can solve the problems.\n\n\
+\
+You should read the list of keys and the explanations of the display.\n\
+Much on-line help is available, please make use of it - press `?' at\n\
+any time for help.\n\n\
+\
+When you have finished selecting packages, press <enter> to confirm changes,\n\
+or `Q' to quit without saving changes. A final check on conflicts and\n\
+dependencies will be done - here too you may see a sublist.\n\n\
+\
+Press <enter> to leave help and enter the list now.\n")
+};
+const struct helpmessage hlp_readonlyintro = {
+  N_("Introduction to read-only package list browser"), N_("\
+Welcome to dselect's main package listing.\n\n\
+\
+You will be presented with a list of packages which are installed or available\n\
+for installation.  Since you do not have the privilege necessary to update\n\
+package states, you are in a read-only mode.  You can navigate around the\n\
+list using the cursor keys (please see the `Keystrokes' help screen), observe\n\
+the status of the packages and read information about them.\n\n\
+\
+You should read the list of keys and the explanations of the display.\n\
+Much on-line help is available, please make use of it - press `?' at\n\
+any time for help.\n\n\
+\
+When you have finished browsing, press `Q' or <enter> to quit.\n\n\
+\
+Press <enter> to leave help and enter the list now.\n")
+};
+const struct helpmessage hlp_recurintro = {
+  N_("Introduction to conflict/dependency resolution sub-list"), N_("\
+Dependency/conflict resolution - introduction.\n\n\
+\
+One or more of your choices have raised a conflict or dependency problem -\n\
+some packages should only be installed in conjunction with certain others, and\n\
+some combinations of packages may not be installed together.\n\n\
+\
+You will see a sub-list containing the packages involved.  The bottom half of\n\
+the display shows relevant conflicts and dependencies; use `i' to cycle between\n\
+that, the package descriptions and the internal control information.\n\n\
+\
+A set of `suggested' packages has been calculated, and the initial markings in\n\
+this sub-list have been set to match those, so you can just hit Return to\n\
+accept the suggestions if you wish.  You may abort the change(s) which caused\n\
+the problem(s), and go back to the main list, by pressing capital `X'.\n\n\
+\
+You can also move around the list and change the markings so that they are more\n\
+like what you want, and you can `reject' my suggestions by using the capital\n\
+`D' or `R' keys (see the keybindings help screen).  You can use capital `Q' to\n\
+force me to accept the situation currently displayed, in case you want to\n\
+override a recommendation or think that the program is mistaken.\n\n\
+\
+Press <enter> to leave help and enter the sub-list; remember: press `?' for help.\n")
+};
+const struct helpmessage hlp_displayexplain1 = {
+  N_("Display, part 1: package listing and status chars"), N_("\
+The top half of the screen shows a list of packages.  For each package you see\n\
+four columns for its current status on the system and mark.  In terse mode (use\n\
+`v' to toggle verbose display) these are single characters, from left to right:\n\n\
+\
+ Error flag: Space - no error (but package may be in broken state - see below)\n\
+              `R'  - serious error during installation, needs reinstallation;\n\
+ Installed state:   Space - not installed;\n\
+                     `*'  - installed;\n\
+                     `-'  - not installed but config files remain;\n\
+       packages in { `U'  - unpacked but not yet configured;\n\
+      these states { `C'  - half-configured (an error happened);\n\
+        are broken { `I'  - half-installed (an error happened).\n\
+ Old mark: what was requested for this package before presenting this list;\n\
+ Mark: what is requested for this package:\n\
+  `*': marked for installation or upgrade;\n\
+  `-': marked for removal, but any configuration files will remain;\n\
+  `=': on hold: package will not be processed at all;\n\
+  `_': marked for purge completely - even remove configuration;\n\
+  `n': package is new and has yet to be marked for install/remove/&c.\n\n\
+\
+Also displayed are each package's Priority, Section, name, installed and\n\
+available version numbers (shift-V to display/hide) and summary description.\n")
+};
+const struct helpmessage hlp_displayexplain2 = {
+  N_("Display, part 2: list highlight; information display"), N_("\
+* Highlight: One line in the package list will be highlighted.  It indicates\n\
+  which package(s) will be affected by presses of `+', `-' and `_'.\n\n\
+\
+* The dividing line in the middle of the screen shows a brief explanation of\n\
+  the status of the currently-highlighted package, or a description of which\n\
+  group is highlighted if a group line is.  If you don't understand the\n\
+  meaning of some of the status characters displayed, go to the relevant\n\
+  package and look at this divider line, or use the `v' key for a verbose\n\
+  display (press `v' again to go back to the terse display).\n\n\
+\
+* The bottom of the screen shows more information about the\n\
+  currently-highlighted package (if there is only one).\n\n\
+\
+  It can show an extended description of the package, the internal package\n\
+  control details (either for the installed or available version of the\n\
+  package), or information about conflicts and dependencies involving the\n\
+  current package (in conflict/dependency resolution sublists).\n\n\
+\
+  Use the `i' key to cycle through the displays, and `I' to hide the\n\
+  information display or expand it to use almost all of the screen.\n")
+};
+const struct helpmessage hlp_methintro = {
+  N_("Introduction to method selection display"), N_("\
+dselect and dpkg can do automatic installation, loading the package files to be\n\
+installed from one of a number of different possible places.\n\n\
+\
+This list allows you to select one of these installation methods.\n\n\
+\
+Move the highlight to the method you wish to use, and hit Enter.  You will then\n\
+be prompted for the information required to do the installation.\n\n\
+\
+As you move the highlight a description of each method, where available, is\n\
+displayed in the bottom half of the screen.\n\n\
+\
+If you wish to quit without changing anything use the `x' key while in the list\n\
+of installation methods.\n\n\
+\
+A full list of keystrokes is available by pressing `k' now, or from the help\n\
+menu reachable by pressing `?'.\n")
+};
+const struct helpmessage hlp_methkeys = {
+  N_("Keystrokes for method selection"), N_("\
+Motion keys: Next/Previous, Top/End, Up/Down, Backwards/Forwards:\n\
+  n, Down-arrow         p, Up-arrow             move highlight\n\
+  N, Page-down, Space   P, Page-up, Backspace   scroll list by 1 page\n\
+  ^n                    ^p                      scroll list by 1 line\n\
+  t, Home               e, End                  jump to top/end of list\n\
+  u                     d                       scroll info by 1 page\n\
+  ^u                    ^d                      scroll info by 1 line\n\
+  B, Left-arrow         F, Right-arrow          pan display by 1/3 screen\n\
+  ^b                    ^f                      pan display by 1 character\n\
+(These are the same motion keys as in the package list display.)\n\n\
+\
+Quit:\n\
+ Return, Enter    select this method and go to its configuration dialogue\n\
+ x, X             exit without changing or setting up the installation method\n\n\
+\
+Miscellaneous:\n\
+  ?, Help, F1      request help\n\
+ ^l                redraw display\n\
+  /                search (just return to cancel)\n\
+  \\                repeat last search\n")
+};