path: root/po/zh_TW.po

# Traditional Chinese translation to dpkg.
# Copyright (C) 2009 Tetralet.
# This file is distributed under the same license as the dpkg package.
#
# Asho Yeh <asho@debian.org.tw>, 2006-2012.
# imacat <imacat@mail.imacat.idv.tw>, 2012.
#
#: lib/dpkg/i18n.c:44
msgid ""
msgstr ""
"Project-Id-Version: dpkg 1.13\n"
"Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org\n"
"POT-Creation-Date: 2013-12-12 08:36+0100\n"
"PO-Revision-Date: 2012-09-08 19:16+0200\n"
"Last-Translator: imacat <imac@mail.imacat.idv.tw>\n"
"Language-Team: Chinese (traditional) <debian-chinese-big5@lists.debian.org>\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0;\n"

#: lib/dpkg/ar.c:66
#, c-format
msgid "invalid character '%c' in archive '%.250s' member '%.16s' size"
msgstr "壓縮檔 '%2$.250s' 中，大小 '%3$.16s' 的檔案，檔名有不合法的字元 '%1$c'"

#: lib/dpkg/ar.c:87 lib/dpkg/ar.c:108 lib/dpkg/ar.c:119 lib/dpkg/ar.c:123
#: lib/dpkg/ar.c:149 utils/update-alternatives.c:1171
#, c-format
msgid "unable to write file '%s'"
msgstr "無法寫入檔案 '%s'"

#: lib/dpkg/ar.c:98
#, c-format
msgid "ar member name '%s' length too long"
msgstr "ar 壓縮檔中檔案的檔名 '%s' 太長了"

#: lib/dpkg/ar.c:100
#, c-format
msgid "ar member size %jd too large"
msgstr "ar 壓縮檔中檔案的大小 %jd 太大了"

#: lib/dpkg/ar.c:105
#, c-format
msgid "generated corrupt ar header for '%s'"
msgstr "'%s' 產生的 ar 檔頭損毀"

#: lib/dpkg/ar.c:136
#, c-format
msgid "failed to fstat ar member file (%s)"
msgstr "無法 fstat 取得 ar 壓縮檔中檔案 (%s) 的檔案資訊"

#: lib/dpkg/ar.c:144
#, c-format
msgid "cannot append ar member file (%s) to '%s': %s"
msgstr "無法在壓縮檔 '%2$s' 中加上檔案 (%1$s)：%3$s"

#: lib/dpkg/arch.c:64 lib/dpkg/parsehelp.c:137 lib/dpkg/pkg-format.c:212
msgid "may not be empty string"
msgstr "不可以是空字串"

#: lib/dpkg/arch.c:66
msgid "must start with an alphanumeric"
msgstr "必須以英數字開頭"

#: lib/dpkg/arch.c:73 lib/dpkg/parsehelp.c:145
#, c-format
msgid "character `%c' not allowed (only letters, digits and characters `%s')"
msgstr "不可有字元 `%c'（只能用英文字母、數字和字元 `%s'）"

#: lib/dpkg/arch.c:236
#, fuzzy
#| msgctxt "version"
#| msgid "<none>"
msgctxt "architecture"
msgid "<none>"
msgstr "<無>"

#: lib/dpkg/arch.c:238
msgctxt "architecture"
msgid "<empty>"
msgstr ""

#: lib/dpkg/arch.c:327
msgid "error writing to architecture list"
msgstr "寫入硬體平台清單時，寫入錯誤"

#: lib/dpkg/atomic-file.c:57
#, c-format
msgid "unable to create new file '%.250s'"
msgstr "無法開新檔案 '%.250s'"

#: lib/dpkg/atomic-file.c:68
#, c-format
msgid "unable to write new file '%.250s'"
msgstr "無法寫入新檔 '%.250s'"

#: lib/dpkg/atomic-file.c:70
#, c-format
msgid "unable to flush new file '%.250s'"
msgstr "無法清除新檔的寫入緩衝 '%.250s'"

#: lib/dpkg/atomic-file.c:72
#, c-format
msgid "unable to sync new file '%.250s'"
msgstr "無法同步新檔 '%.250s' 的寫入緩衝"

#: lib/dpkg/atomic-file.c:81
#, c-format
msgid "unable to close new file `%.250s'"
msgstr "無法關閉新檔 `%.250s'"

#: lib/dpkg/atomic-file.c:92
#, c-format
msgid "error removing old backup file '%s'"
msgstr "刪除舊備份檔發生錯誤 '%s'"

#: lib/dpkg/atomic-file.c:94
#, c-format
msgid "error creating new backup file '%s'"
msgstr "建立新備份檔發生錯誤 '%s'"

#: lib/dpkg/atomic-file.c:103 lib/dpkg/atomic-file.c:105
#: lib/dpkg/triglib.c:447 src/infodb-upgrade.c:169 src/infodb-upgrade.c:174
#: src/infodb-upgrade.c:200 src/remove.c:346 src/remove.c:437
#, c-format
msgid "cannot remove `%.250s'"
msgstr "無法刪除 `%.250s'"

#: lib/dpkg/atomic-file.c:115
#, c-format
msgid "error installing new file '%s'"
msgstr "安裝新檔發生錯誤 '%s'"

#: lib/dpkg/buffer.c:133
msgid "failed to write"
msgstr "寫入錯誤"

#: lib/dpkg/buffer.c:154
msgid "failed to read"
msgstr "讀取錯誤"

#: lib/dpkg/buffer.c:223
msgid "unexpected end of file or stream"
msgstr "檔案或資料串流意外結束"

#: lib/dpkg/buffer.c:269
msgid "failed to seek"
msgstr "移動讀寫頭錯誤"

#: lib/dpkg/command.c:179 lib/dpkg/command.c:226 src/help.c:391
#: src/unpack.c:103 src/unpack.c:143 src/unpack.c:467 src/unpack.c:924
#: dpkg-deb/build.c:192 dpkg-deb/build.c:510 dpkg-deb/build.c:602
#: dpkg-deb/info.c:65 dpkg-split/split.c:70 utils/update-alternatives.c:414
#, c-format
msgid "unable to execute %s (%s)"
msgstr "執行 %s 錯誤 (%s)"

#: lib/dpkg/compress.c:113 lib/dpkg/compress.c:122
#, c-format
msgid "%s: pass-through copy error: %s"
msgstr "%s：直接資料對拷錯誤：%s"

#: lib/dpkg/compress.c:156
#, c-format
msgid "%s: error binding input to gzip stream"
msgstr "%s：輸入轉接 gzip 資料串流錯誤"

#: lib/dpkg/compress.c:168
#, c-format
msgid "%s: internal gzip read error: '%s'"
msgstr "%s：gzip 內部讀取錯誤：'%s'"

#: lib/dpkg/compress.c:176 lib/dpkg/compress.c:180
#, c-format
msgid "%s: internal gzip write error"
msgstr "%s：gzip 內部寫入錯誤"

#: lib/dpkg/compress.c:206
#, c-format
msgid "%s: error binding output to gzip stream"
msgstr "%s：輸出轉接 gzip 串流錯誤"

#: lib/dpkg/compress.c:213
#, c-format
msgid "%s: internal gzip read error"
msgstr "%s：gzip 內部讀取錯誤"

#: lib/dpkg/compress.c:223
#, c-format
msgid "%s: internal gzip write error: '%s'"
msgstr "%s：gzip 內部寫入錯誤：'%s'"

#: lib/dpkg/compress.c:236
#, c-format
msgid "%s: internal gzip write error: %s"
msgstr "%s：gzip 內部寫入錯誤：%s"

#: lib/dpkg/compress.c:289
#, c-format
msgid "%s: error binding input to bzip2 stream"
msgstr "%s：輸入轉接 bzip2 資料串流錯誤"

#: lib/dpkg/compress.c:301
#, c-format
msgid "%s: internal bzip2 read error: '%s'"
msgstr "%s：bzip2 內部讀取錯誤：'%s'"

#: lib/dpkg/compress.c:309 lib/dpkg/compress.c:313 lib/dpkg/compress.c:363
#, c-format
msgid "%s: internal bzip2 write error"
msgstr "%s：內部 bzip2 錯誤"

#: lib/dpkg/compress.c:327
#, c-format
msgid "%s: error binding output to bzip2 stream"
msgstr "%s：輸出轉接 bzip2 串流錯誤"

#: lib/dpkg/compress.c:334
#, c-format
msgid "%s: internal bzip2 read error"
msgstr "%s：bzip2 內部讀取錯誤"

#: lib/dpkg/compress.c:344 lib/dpkg/compress.c:355
#, c-format
msgid "%s: internal bzip2 write error: '%s'"
msgstr "%s：bzip2 內部寫入錯誤：'%s'"

#: lib/dpkg/compress.c:351
msgid "unexpected bzip2 error"
msgstr "bzip2 意外的錯誤"

#: lib/dpkg/compress.c:412
msgid "internal error (bug)"
msgstr "內部錯誤 (bug)"

#: lib/dpkg/compress.c:419
msgid "memory usage limit reached"
msgstr "記憶體使用超限"

#: lib/dpkg/compress.c:423
msgid "unsupported compression preset"
msgstr "壓梭設定不支援"

#: lib/dpkg/compress.c:425
msgid "unsupported options in file header"
msgstr "檔頭選項不支援"

#: lib/dpkg/compress.c:429
msgid "compressed data is corrupt"
msgstr "壓縮資料損毀"

#: lib/dpkg/compress.c:433
msgid "unexpected end of input"
msgstr "輸入意外結束"

#: lib/dpkg/compress.c:437
msgid "file format not recognized"
msgstr "無法辨識檔案格式"

#: lib/dpkg/compress.c:441
msgid "unsupported type of integrity check"
msgstr "完整性測試的類型不支援"

#: lib/dpkg/compress.c:482
#, c-format
msgid "%s: lzma read error"
msgstr "%s：lzma 讀取錯誤"

#: lib/dpkg/compress.c:494
#, c-format
msgid "%s: lzma write error"
msgstr "%s：lzma 寫入錯誤"

#: lib/dpkg/compress.c:503
#, c-format
msgid "%s: lzma close error"
msgstr "%s：lzma 關檔錯誤"

#: lib/dpkg/compress.c:509
#, c-format
msgid "%s: lzma error: %s"
msgstr "%s：lzma 錯誤：%s"

#: lib/dpkg/compress.c:799
msgid "unknown compression strategy"
msgstr "壓縮方式不明"

#: lib/dpkg/dbmodify.c:68
#, c-format
msgid ""
"updates directory contains file `%.250s' whose name is too long (length=%d, "
"max=%d)"
msgstr ""
"更新目錄中包含了檔案 `%.250s'，但它的名稱太長了（長度為 %d，最大為 %d）"

#: lib/dpkg/dbmodify.c:72
#, c-format
msgid ""
"updates directory contains files with different length names (both %d and %d)"
msgstr "更新目錄中含有不同長度名稱的檔案（分別為 %d 和 %d）"

#: lib/dpkg/dbmodify.c:86
#, c-format
msgid "cannot scan updates directory `%.255s'"
msgstr "無法掃描更新目錄 `%.255s'"

#: lib/dpkg/dbmodify.c:100
#, c-format
msgid "failed to remove incorporated update file %.255s"
msgstr "無法刪除合併後的更新檔 %.255s"

#: lib/dpkg/dbmodify.c:121 dpkg-deb/build.c:498
#, c-format
msgid "unable to create `%.255s'"
msgstr "無法建立 `%.255s'"

#: lib/dpkg/dbmodify.c:125
#, c-format
msgid "unable to fill %.250s with padding"
msgstr "無法用填料填滿 %.250s"

#: lib/dpkg/dbmodify.c:127
#, c-format
msgid "unable to flush %.250s after padding"
msgstr "在填充後無法刷新 %.250s"

#: lib/dpkg/dbmodify.c:129
#, c-format
msgid "unable to seek to start of %.250s after padding"
msgstr "在填充後無法搜尋到 %.250s 的起始位置"

#: lib/dpkg/dbmodify.c:195
#, c-format
msgid "unable to open lock file %s for testing"
msgstr "無法開啟鎖定檔 %s 測試"

#: lib/dpkg/dbmodify.c:221
msgid "unable to open/create status database lockfile"
msgstr "無法開啟／建立狀態資料庫的鎖定檔"

#: lib/dpkg/dbmodify.c:231
msgid "you do not have permission to lock the dpkg status database"
msgstr "您沒有鎖定 dpkg 的狀態資料庫的權限"

#: lib/dpkg/dbmodify.c:233
msgid "dpkg status database"
msgstr "無法鎖定 dpkg 的狀態資料庫"

#: lib/dpkg/dbmodify.c:257
msgid "requested operation requires superuser privilege"
msgstr "該操作需要超級使用者權限"

#: lib/dpkg/dbmodify.c:262
msgid "unable to access dpkg status area"
msgstr "無法存取 dpkg 狀態庫"

#: lib/dpkg/dbmodify.c:264
msgid "operation requires read/write access to dpkg status area"
msgstr "該操作需要在 dpkg 狀態庫有著讀寫權限"

#: lib/dpkg/dbmodify.c:315
#, c-format
msgid "failed to remove my own update file %.255s"
msgstr "無法刪除自己的更新檔 %.255s"

#: lib/dpkg/dbmodify.c:353
#, c-format
msgid "unable to write updated status of `%.250s'"
msgstr "無法寫入 `%.250s' 的更新狀態"

#: lib/dpkg/dbmodify.c:356
#, c-format
msgid "unable to flush updated status of `%.250s'"
msgstr "無法刷新 `%.250s' 的更新狀態"

#: lib/dpkg/dbmodify.c:359
#, c-format
msgid "unable to truncate for updated status of `%.250s'"
msgstr "無法縮減 `%.250s' 的更新狀態"

#: lib/dpkg/dbmodify.c:362
#, c-format
msgid "unable to fsync updated status of `%.250s'"
msgstr "無法 fsync 同步 `%.250s' 更新狀態的寫入緩衝"

#: lib/dpkg/dbmodify.c:365
#, c-format
msgid "unable to close updated status of `%.250s'"
msgstr "無法關閉 `%.250s' 的更新狀態"

#: lib/dpkg/dbmodify.c:369
#, c-format
msgid "unable to install updated status of `%.250s'"
msgstr "無法安裝 `%.250s' 的更新狀態"

#: lib/dpkg/deb-version.c:55
msgid "format version with empty major component"
msgstr "版本格式中缺主版本"

#: lib/dpkg/deb-version.c:57
msgid "format version has no dot"
msgstr "版本格式中缺點 (.) 號"

#: lib/dpkg/deb-version.c:63
msgid "format version with empty minor component"
msgstr "版本格式中缺次版本"

#: lib/dpkg/deb-version.c:65
msgid "format version followed by junk"
msgstr "版本格式結尾是亂碼"

#: lib/dpkg/dir.c:50
#, c-format
msgid "unable to get file descriptor for directory '%s'"
msgstr "無法由 '%s' 目錄取得檔案描述"

#: lib/dpkg/dir.c:54
#, c-format
msgid "unable to sync directory '%s'"
msgstr "無法同步目錄 '%s' 的寫入緩衝"

#: lib/dpkg/dir.c:69 lib/dpkg/dir.c:131
#, c-format
msgid "unable to open directory '%s'"
msgstr "無法開啟目錄 '%s'"

#: lib/dpkg/dir.c:109 src/divertcmd.c:217 dpkg-split/split.c:206
#: utils/update-alternatives.c:1311
#, c-format
msgid "unable to open file '%s'"
msgstr "無法開啟檔案 '%s'"

#: lib/dpkg/dir.c:111 src/divertcmd.c:232 dpkg-deb/build.c:638
#: dpkg-split/join.c:70 dpkg-split/queue.c:203
#: utils/update-alternatives.c:1424
#, c-format
msgid "unable to sync file '%s'"
msgstr "無法同步檔案 '%s' 的寫入緩衝"

#: lib/dpkg/dir.c:113 src/divertcmd.c:234 dpkg-deb/build.c:640
#: dpkg-split/join.c:72 dpkg-split/queue.c:205
#: utils/update-alternatives.c:1332 utils/update-alternatives.c:1426
#, c-format
msgid "unable to close file '%s'"
msgstr "無法關閉檔案 '%s'"

#: lib/dpkg/dump.c:464
#, c-format
msgid "failed to write details of `%.50s' to `%.250s'"
msgstr "無法將 `%.50s' 的詳盡資訊寫入 `%.250s'"

#: lib/dpkg/dump.c:488
#, c-format
msgid "unable to set buffering on %s database file"
msgstr "無法在%s資料庫檔案上設緩衝區"

#: lib/dpkg/dump.c:500
#, c-format
msgid "failed to write %s database record about '%.50s' to '%.250s'"
msgstr "無法寫入關於 '%2$.50s' 到 '%3$.250s' 的%1$s資料庫記錄"

#: lib/dpkg/ehandle.c:97
#, c-format
msgid ""
"%s: unrecoverable fatal error, aborting:\n"
" %s\n"
msgstr ""
"%s：無法回復的嚴重錯誤，中止操作：\n"
" %s\n"

#: lib/dpkg/ehandle.c:103
#, c-format
msgid ""
"%s: outside error context, aborting:\n"
" %s\n"
msgstr ""
"%s：在錯誤相關處外，中止操作：\n"
" %s\n"

#: lib/dpkg/ehandle.c:123
msgid "out of memory for new error context"
msgstr "記憶體不足，無法建立錯誤相關資料"

#: lib/dpkg/ehandle.c:188
#, c-format
msgid ""
"%s: error while cleaning up:\n"
" %s\n"
msgstr ""
"%s: 在清理時發生錯誤：\n"
" %s\n"

#: lib/dpkg/ehandle.c:207
#, c-format
msgid "%s: too many nested errors during error recovery!!\n"
msgstr "%s：在錯誤回復時，又發生了更多的層層錯誤！！\n"

#: lib/dpkg/ehandle.c:274 lib/dpkg/ehandle.c:313
msgid "out of memory for new cleanup entry"
msgstr "記憶體不足，無法建立新的清理項目"

#: lib/dpkg/ehandle.c:297
msgid "out of memory for new cleanup entry with many arguments"
msgstr "記憶體不足，無法建立多參數的新清理項目"

#: lib/dpkg/ehandle.c:358
#, c-format
msgid "%s: error: %s\n"
msgstr "%s：錯誤：%s\n"

#: lib/dpkg/ehandle.c:394
#, c-format
msgid "%s:%s:%d:%s: internal error: %s\n"
msgstr "%s:%s:%d:%s: 內部錯誤：%s\n"

#: lib/dpkg/fields.c:52
#, c-format
msgid "%s is missing"
msgstr "未找到 %s"

#: lib/dpkg/fields.c:56
#, c-format
msgid "'%.50s' is not allowed for %s"
msgstr "'%.50s' 不可用於 %s"

#: lib/dpkg/fields.c:80
#, c-format
msgid "junk after %s"
msgstr "在 %s 之後有多餘的資料"

#: lib/dpkg/fields.c:94
#, c-format
msgid "invalid package name (%.250s)"
msgstr "無效的套件名稱 (%.250s)"

#: lib/dpkg/fields.c:109
#, c-format
msgid "empty file details field `%s'"
msgstr "檔案說明欄位 `%s' 是空的"

#: lib/dpkg/fields.c:112
#, c-format
msgid "file details field `%s' not allowed in status file"
msgstr "這個檔案說明欄位 `%s' 不可用於狀態檔"

#: lib/dpkg/fields.c:125
#, c-format
msgid "too many values in file details field `%s' (compared to others)"
msgstr "檔案說明欄位 `%s' 裡的值太多（和其他的相比）"

#: lib/dpkg/fields.c:139
#, c-format
msgid "too few values in file details field `%s' (compared to others)"
msgstr "檔案說明欄位 `%s' 中的值太少（和其他的相比）"

#: lib/dpkg/fields.c:162
msgid "yes/no in boolean field"
msgstr "boolean 欄位的 yes/no"

#: lib/dpkg/fields.c:177
msgid "foreign/allowed/same/no in quadstate field"
msgstr "四態欄位的 foreign/allowed/same/no"

#: lib/dpkg/fields.c:189
#, c-format
msgid "'%s' is not a valid architecture name: %s"
msgstr "不合法的硬體平台名稱 '%s'：%s"

#: lib/dpkg/fields.c:208
#, fuzzy
#| msgid "word in `priority' field"
msgid "word in 'Priority' field"
msgstr "`優先等級' 欄位的字串"

#: lib/dpkg/fields.c:221 lib/dpkg/fields.c:272 lib/dpkg/fields.c:622
#: lib/dpkg/fields.c:647
#, fuzzy, c-format
#| msgid "value for `status' field not allowed in this context"
msgid "value for '%s' field not allowed in this context"
msgstr "在此不能使用這個 `status' 欄位的值"

#: lib/dpkg/fields.c:226
#, fuzzy
#| msgid "first (want) word in `status' field"
msgid "first (want) word in 'Status' field"
msgstr "在 `status' 欄位的第一個字 (want)"

#: lib/dpkg/fields.c:228
#, fuzzy
#| msgid "second (error) word in `status' field"
msgid "second (error) word in 'Status' field"
msgstr "在 `status' 欄位的第二個字 (error)"

#: lib/dpkg/fields.c:230
#, fuzzy
#| msgid "third (status) word in `status' field"
msgid "third (status) word in 'Status' field"
msgstr "在 `status' 欄位的第三個字 (status)"

#: lib/dpkg/fields.c:240 lib/dpkg/fields.c:278
#, fuzzy, c-format
#| msgid "error in Version string '%.250s'"
msgid "error in '%s' field string '%.250s'"
msgstr "版本字串 '%.250s' 有誤"

#: lib/dpkg/fields.c:252
#, fuzzy, c-format
#| msgid "obsolete `Revision' or `Package-Revision' field used"
msgid "obsolete '%s' or '%s' field used"
msgstr "使用了已廢棄的 `Revision' 或 `Package-Revision' 欄位"

#: lib/dpkg/fields.c:305
#, fuzzy, c-format
#| msgid "value for `conffiles' has malformatted line `%.*s'"
msgid "value for '%s' field has malformatted line '%.*s'"
msgstr "`conffiles' 的值有行 `%.*s' 的格式錯誤了"

#: lib/dpkg/fields.c:327
#, fuzzy, c-format
#| msgid "value for `conffiles' has line starting with non-space `%c'"
msgid "value for '%s' has line starting with non-space '%c'"
msgstr "`conffiles' 的值有行是以非空白字元 `%c' 開頭"

#: lib/dpkg/fields.c:344
msgid "root or null directory is listed as a conffile"
msgstr "root 或空目錄也被列為 conffile"

#: lib/dpkg/fields.c:405
#, c-format
msgid ""
"`%s' field, missing package name, or garbage where package name expected"
msgstr "`%s' 欄位，找不到套件名稱，或是應當為套件名稱的地方是亂碼"

#: lib/dpkg/fields.c:415
#, c-format
msgid "`%s' field, invalid package name `%.255s': %s"
msgstr "`%s' 欄位，無效的套件名稱 `%.255s'：%s"

#: lib/dpkg/fields.c:444
#, c-format
msgid ""
"'%s' field, missing architecture name, or garbage where architecture name "
"expected"
msgstr "'%s' 欄位，找不到硬體平台名稱，或硬體平台名稱是亂碼"

#: lib/dpkg/fields.c:457
#, c-format
msgid ""
"'%s' field, reference to '%.255s': invalid architecture name '%.255s': %s"
msgstr "'%s' 欄位，參照 '%.255s'：硬體平台名稱 '%.255s' 有誤：%s"

#: lib/dpkg/fields.c:491
#, c-format
msgid ""
"`%s' field, reference to `%.255s':\n"
" bad version relationship %c%c"
msgstr ""
"`%s' 欄位，參照至 `%.255s'：\n"
" 不正確的版本相依關係 %c%c"

#: lib/dpkg/fields.c:497
#, c-format
msgid ""
"`%s' field, reference to `%.255s':\n"
" `%c' is obsolete, use `%c=' or `%c%c' instead"
msgstr ""
"`%s' 欄位，參照至 `%.255s'：\n"
" `%c' 已廢棄，請替而使用 `%c=' 或 `%c%c'"

#: lib/dpkg/fields.c:507
#, c-format
msgid ""
"`%s' field, reference to `%.255s':\n"
" implicit exact match on version number, suggest using `=' instead"
msgstr ""
"`%s' 欄位，參照至 `%.255s'：\n"
" 未明確要求版本號完全一致，建議替而使用 `='"

#: lib/dpkg/fields.c:515
#, fuzzy, c-format
#| msgid "Only exact versions may be used for Provides"
msgid "only exact versions may be used for '%s' field"
msgstr "在 Provides 中只能指定明確的版本"

#: lib/dpkg/fields.c:520
#, c-format
msgid ""
"`%s' field, reference to `%.255s':\n"
" version value starts with non-alphanumeric, suggest adding a space"
msgstr ""
"`%s' 欄位，參照至 `%.255s'：\n"
" 版本號不是以英數字開頭，建議加一個空格"

#: lib/dpkg/fields.c:537 lib/dpkg/fields.c:541
#, c-format
msgid "`%s' field, reference to `%.255s': version contains `%c'"
msgstr "`%s' 欄位，參照至 `%.255s'：版本號含有 `%c'"

#: lib/dpkg/fields.c:545
#, c-format
msgid "`%s' field, reference to `%.255s': version unterminated"
msgstr "`%s' 欄位，參照至 `%.255s'：版本號未終止"

#: lib/dpkg/fields.c:551
#, c-format
msgid "'%s' field, reference to '%.255s': error in version"
msgstr "'%s' 欄位，參照 '%.255s'：版本號有誤"

#: lib/dpkg/fields.c:561
#, c-format
msgid "`%s' field, syntax error after reference to package `%.255s'"
msgstr "`%s' 欄位，在參照至套件 `%.255s' 後的語法有誤"

#: lib/dpkg/fields.c:568
#, c-format
msgid "alternatives (`|') not allowed in %s field"
msgstr "在 %s 欄位不可有可替換符號 (`|')"

#: lib/dpkg/fields.c:629
#, c-format
msgid "illegal pending trigger name `%.255s': %s"
msgstr "不合法的待執行觸發程式名稱 `%.255s': %s"

#: lib/dpkg/fields.c:633
#, c-format
msgid "duplicate pending trigger `%.255s'"
msgstr "重複的待執行觸發程式 `%.255s'"

#: lib/dpkg/fields.c:656
#, c-format
msgid "illegal package name in awaited trigger `%.255s': %s"
msgstr "在正要執行的觸發程式 `%.255s' 裡有不合法的套件名稱：%s"

#: lib/dpkg/fields.c:661
#, c-format
msgid "duplicate awaited trigger package `%.255s'"
msgstr "重複的正要執行的觸發程式套件 `%.255s'"

#: lib/dpkg/file.c:53
#, c-format
msgid "unable to stat source file '%.250s'"
msgstr "無法取得來源檔 '%.250s' 的檔案資訊"

#: lib/dpkg/file.c:57
#, c-format
msgid "unable to change ownership of target file '%.250s'"
msgstr "無法改變目標檔案 '%.250s' 的所有者"

#: lib/dpkg/file.c:61
#, c-format
msgid "unable to set mode of target file '%.250s'"
msgstr "無法設定目標檔案 '%.250s' 的權限"

#: lib/dpkg/file.c:87
#, c-format
msgid "unable to unlock %s"
msgstr "無法解除鎖定 %s"

#: lib/dpkg/file.c:113
#, c-format
msgid "unable to check file '%s' lock status"
msgstr "無法檢查檔案 '%s' 的鎖定狀態"

#: lib/dpkg/file.c:148
#, c-format
msgid "%s is locked by another process"
msgstr "%s 已被另外一個程序鎖定了"

#: lib/dpkg/file.c:150
#, c-format
msgid "unable to lock %s"
msgstr "無法鎖定 %s"

#: lib/dpkg/file.c:171 lib/dpkg/file.c:176
msgid "showing file on pager"
msgstr "以可換頁的瀏覽程式瀏覽檔案"

#: lib/dpkg/log.c:53
#, c-format
msgid "could not open log '%s': %s"
msgstr "無法開啟日誌 '%s'：%s"

#: lib/dpkg/log.c:85
msgid "<package status and progress file descriptor>"
msgstr "<套件的狀態及進展的檔案重導>"

#: lib/dpkg/log.c:114
#, c-format
msgid "unable to write to status fd %d"
msgstr "無法寫到檔案描述 %d 上"

#: lib/dpkg/mlib.c:42 lib/dpkg/mlib.c:94 utils/update-alternatives.c:274
#: utils/update-alternatives.c:331 utils/update-alternatives.c:1124
msgid "failed to allocate memory"
msgstr "無法配置記憶體"

#: lib/dpkg/mlib.c:106
#, c-format
msgid "failed to dup for std%s"
msgstr "無法替 std%s dup"

#: lib/dpkg/mlib.c:107
#, c-format
msgid "failed to dup for fd %d"
msgstr "無法替 fd %d dup"

#: lib/dpkg/mlib.c:113
msgid "failed to create pipe"
msgstr "無法建立輸出入轉向"

#: lib/dpkg/mlib.c:121
#, c-format
msgid "error writing to '%s'"
msgstr "'%s' 寫入錯誤"

#: lib/dpkg/mlib.c:131
#, c-format
msgid "unable to read filedescriptor flags for %.250s"
msgstr "無法讀取 %.250s 的檔案重導的設定"

#: lib/dpkg/mlib.c:133
#, c-format
msgid "unable to set close-on-exec flag for %.250s"
msgstr "無法在 %.250s 上設定 close-on-exec"

#: lib/dpkg/options.c:64
#, c-format
msgid "configuration error: %s:%d: %s"
msgstr "設定錯誤：%s:%d: %s"

#: lib/dpkg/options.c:78
#, c-format
msgid "failed to open configuration file '%.255s' for reading: %s"
msgstr "無法開啟設定檔 '%.255s' 來讀：%s"

#: lib/dpkg/options.c:105
#, c-format
msgid "unbalanced quotes in '%s'"
msgstr "'%s' 中左右引號不對稱"

#: lib/dpkg/options.c:121
#, c-format
msgid "unknown option '%s'"
msgstr "選項不明 '%s'"

#: lib/dpkg/options.c:125
#, c-format
msgid "'%s' needs a value"
msgstr "'%s' 需有參數值"

#: lib/dpkg/options.c:131
#, c-format
msgid "'%s' does not take a value"
msgstr "'%s' 不需參數值"

#: lib/dpkg/options.c:137
#, c-format
msgid "read error in configuration file `%.255s'"
msgstr "設定檔 `%.255s' 讀取錯誤"

#: lib/dpkg/options.c:138
#, c-format
msgid "error closing configuration file `%.255s'"
msgstr "關閉設定檔 `%.255s' 時發生錯誤"

#: lib/dpkg/options.c:174
#, c-format
msgid "error opening configuration directory '%s'"
msgstr "開啟設定目錄 '%s' 時發生錯誤"

#: lib/dpkg/options.c:237
#, c-format
msgid "unknown option --%s"
msgstr "未知的選項 --%s"

#: lib/dpkg/options.c:241
#, c-format
msgid "--%s option takes a value"
msgstr "--%s 選項需有一個參數"

#: lib/dpkg/options.c:246
#, c-format
msgid "--%s option does not take a value"
msgstr "--%s 選項並不需要參數"

#: lib/dpkg/options.c:254
#, c-format
msgid "unknown option -%c"
msgstr "未知的選項 -%c"

#: lib/dpkg/options.c:259
#, c-format
msgid "-%c option takes a value"
msgstr "-%c 選項需有一個參數"

#: lib/dpkg/options.c:267
#, c-format
msgid "-%c option does not take a value"
msgstr "-%c 選項並不需要參數"

#: lib/dpkg/options.c:286 dpkg-split/main.c:127
#, c-format
msgid "invalid integer for --%s: `%.250s'"
msgstr "--%s 所指定的數字無效：`%.250s'"

#: lib/dpkg/options.c:294
#, c-format
msgid "obsolete option '--%s'\n"
msgstr "已作廢選項 '--%s'\n"

#: lib/dpkg/options.c:310
#, c-format
msgid "conflicting actions -%c (--%s) and -%c (--%s)"
msgstr "相互衝突的操作 -%c (--%s) 和 -%c (--%s)"

#: lib/dpkg/parse.c:138
#, c-format
msgid "duplicate value for `%s' field"
msgstr "有多個值對應至 `%s' 欄位"

#: lib/dpkg/parse.c:150
#, c-format
msgid "user-defined field name `%.*s' too short"
msgstr "用戶自定的欄位名 `%.*s' 過短"

#: lib/dpkg/parse.c:156
#, c-format
msgid "duplicate value for user-defined field `%.*s'"
msgstr "有多個值對應至用戶自定的欄位 `%.*s'"

#: lib/dpkg/parse.c:201 lib/dpkg/parsehelp.c:314 lib/dpkg/parsehelp.c:326
#, c-format
msgid "missing %s"
msgstr "找不到 %s"

#: lib/dpkg/parse.c:203 lib/dpkg/parsehelp.c:316 lib/dpkg/parsehelp.c:329
#, c-format
msgid "empty value for %s"
msgstr "%s 的值是空的"

#: lib/dpkg/parse.c:211
#, c-format
msgid "package has field '%s' but is missing architecture"
msgstr "套件有 '%s' 欄位，但缺硬體平台"

#: lib/dpkg/parse.c:214
#, c-format
msgid "package has field '%s' but is architecture all"
msgstr "套件有欄位 '%s'，但適用所有平台"

#: lib/dpkg/parse.c:232
#, fuzzy
#| msgid "Configured-Version for package with inappropriate Status"
msgid "Config-Version for package with inappropriate Status"
msgstr "套件的 Configured-Version 和 Status 的內容不符"

#: lib/dpkg/parse.c:243
#, c-format
msgid "package has status %s but triggers are awaited"
msgstr "套件的狀態為 %s 但觸發程式正要執行"

#: lib/dpkg/parse.c:247
msgid "package has status triggers-awaited but no triggers awaited"
msgstr "套件的狀態為 triggers-awaited 但並沒有觸發程式正要執行"

#: lib/dpkg/parse.c:253
#, c-format
msgid "package has status %s but triggers are pending"
msgstr "套件的狀態為 %s 但觸發程式尚待執行"

#: lib/dpkg/parse.c:257
msgid "package has status triggers-pending but no triggers pending"
msgstr "套件的狀態為 triggers-pending 但並沒有觸發程式尚待執行"

#: lib/dpkg/parse.c:267
msgid "Package which in state not-installed has conffiles, forgetting them"
msgstr "該套件的狀態是尚未安裝，但是它卻有 conffile，不去理會它"

#: lib/dpkg/parse.c:345
#, fuzzy
#| msgid "multiple non-coinstallable package instances present"
msgid ""
"multiple non-coinstallable package instances present; most probably due to "
"an upgrade from an unofficial dpkg"
msgstr "安裝了多個無法同時安裝的套件"

#: lib/dpkg/parse.c:349
#, fuzzy
#| msgid "mixed non-coinstallable and coinstallable package instances present"
msgid ""
"mixed non-coinstallable and coinstallable package instances present; most "
"probably due to an upgrade from an unofficial dpkg"
msgstr "混合安裝了可以同時安裝，及無法同時安裝的套件"

#: lib/dpkg/parse.c:409
#, c-format
msgid ""
"%s %s (Multi-Arch: %s) is not co-installable with %s which has multiple "
"installed instances"
msgstr "已安裝多份的 %4$s ，無法同時安裝 %1$s %2$s（多硬體平台：%3$s）"

#: lib/dpkg/parse.c:523
#, c-format
msgid "failed to open package info file `%.255s' for reading"
msgstr "無法開啟套件 info 檔 `%.255s' 以讀取"

#: lib/dpkg/parse.c:529
#, c-format
msgid "can't stat package info file `%.255s'"
msgstr "無法取得套件的 info 檔 `%.255s' 的檔案資訊"

#: lib/dpkg/parse.c:535
#, c-format
msgid "can't mmap package info file `%.255s'"
msgstr "無法 mmap 套件的 info 檔 `%.255s'"

#: lib/dpkg/parse.c:540
#, c-format
msgid "reading package info file '%.255s'"
msgstr "讀取套件 info 檔 '%.255s'"

#: lib/dpkg/parse.c:551
#, c-format
msgid "failed to close after read: `%.255s'"
msgstr "讀取後無法關閉：`%.255s'"

#: lib/dpkg/parse.c:585
msgid "empty field name"
msgstr ""

#: lib/dpkg/parse.c:587
#, c-format
msgid "field name '%.*s' cannot start with hyphen"
msgstr ""

#: lib/dpkg/parse.c:597
#, c-format
msgid "EOF after field name `%.*s'"
msgstr "欄位名稱 `%.*s' 後有 EOF"

#: lib/dpkg/parse.c:600
#, c-format
msgid "newline in field name `%.*s'"
msgstr "欄位名稱 `%.*s' 中有換行"

#: lib/dpkg/parse.c:603
#, c-format
msgid "MSDOS EOF (^Z) in field name `%.*s'"
msgstr "欄位名稱 `%.*s' 中有 MSDOS EOF (^Z)"

#: lib/dpkg/parse.c:607
#, c-format
msgid "field name `%.*s' must be followed by colon"
msgstr "欄位名稱 `%.*s' 之後必須有個冒號"

#: lib/dpkg/parse.c:618
#, c-format
msgid "EOF before value of field `%.*s' (missing final newline)"
msgstr "欄位 `%.*s' 的值前面有 EOF（檔尾沒有換行）"

#: lib/dpkg/parse.c:622
#, c-format
msgid "MSDOS EOF char in value of field `%.*s' (missing newline?)"
msgstr "欄位 `%.*s' 的值之中有 MSDOS EOF 字元（沒有換行？）"

#: lib/dpkg/parse.c:633
#, c-format
msgid "blank line in value of field '%.*s'"
msgstr "欄位 '%.*s' 的值中有空白行"

#: lib/dpkg/parse.c:653
#, c-format
msgid "EOF during value of field `%.*s' (missing final newline)"
msgstr "欄位 `%.*s' 的值之中有 EOF 字元（檔尾沒有換行）"

#: lib/dpkg/parse.c:738
msgid "several package info entries found, only one allowed"
msgstr "找到了多個套件的 info 項目，但只能有一個"

#: lib/dpkg/parse.c:765
#, c-format
msgid "no package information in `%.255s'"
msgstr "在 `%.255s' 中沒有套件的相關資訊"

#: lib/dpkg/parsehelp.c:48
#, c-format
msgid ""
"parsing file '%.255s' near line %d package '%.255s':\n"
" %.255s"
msgstr ""
"分析檔案 '%.255s' 的第 %d 行附近，套件為 '%.255s'：\n"
" %.255s"

#: lib/dpkg/parsehelp.c:52
#, c-format
msgid ""
"parsing file '%.255s' near line %d:\n"
" %.255s"
msgstr ""
"分析檔案 '%.255s' 的第 %d 行附近：\n"
" %.255s"

#: lib/dpkg/parsehelp.c:139
msgid "must start with an alphanumeric character"
msgstr "必須以英數字開頭"

#: lib/dpkg/parsehelp.c:187
msgctxt "version"
msgid "<none>"
msgstr "<無>"

#: lib/dpkg/parsehelp.c:217
msgid "version string is empty"
msgstr "版本號是空的"

#: lib/dpkg/parsehelp.c:232
msgid "version string has embedded spaces"
msgstr "版本號裡嵌有空格字元"

#: lib/dpkg/parsehelp.c:241
msgid "epoch in version is not number"
msgstr "版本中的 epoch 不是數字"

#: lib/dpkg/parsehelp.c:243
msgid "epoch in version is negative"
msgstr "版本中的 epoch 是負數"

#: lib/dpkg/parsehelp.c:245
msgid "epoch in version is too big"
msgstr "版本中的 epoch 太大"

#: lib/dpkg/parsehelp.c:247
msgid "nothing after colon in version number"
msgstr "版本號的冒號後面沒有東西"

#: lib/dpkg/parsehelp.c:262
msgid "version number does not start with digit"
msgstr "版本號開頭不是數字"

#: lib/dpkg/parsehelp.c:265
msgid "invalid character in version number"
msgstr "版本號含不合法的字元"

#: lib/dpkg/parsehelp.c:269
msgid "invalid character in revision number"
msgstr "修訂版號含不合法的字元"

#: lib/dpkg/pkg-db.c:164 lib/dpkg/pkg-spec.c:97
#, c-format
msgid "ambiguous package name '%s' with more than one installed instance"
msgstr "套件名稱 '%s' 曖昧不明，符合多個已安裝套件"

#: lib/dpkg/pkg-format.c:87
#, c-format
msgid "invalid character '%c' in field width"
msgstr "欄位寬度中有無效的字元 '%c'"

#: lib/dpkg/pkg-format.c:92
msgid "field width is out of range"
msgstr "欄位寬度超出範圍"

#: lib/dpkg/pkg-format.c:183
msgid "missing closing brace"
msgstr "找不到結尾括弧"

#: lib/dpkg/pkg-show.c:141
msgid "(no description available)"
msgstr "（無相關介紹）"

#: lib/dpkg/pkg-spec.c:71
#, c-format
msgid "illegal package name in specifier '%s%s%s': %s"
msgstr "在描述資料 '%s%s%s' 裡有不合法的套件名稱：%s"

#: lib/dpkg/pkg-spec.c:81
#, c-format
msgid "illegal architecture name in specifier '%s:%s': %s"
msgstr "在描述資料 '%s:%s' 裡有不合法的硬體平台名稱：%s"

#: lib/dpkg/report.c:66
#, c-format
msgid "%s: warning: %s\n"
msgstr "%s: 警告：%s\n"

#: lib/dpkg/strwide.c:60
#, c-format
msgid "cannot convert multibyte string '%s' to a wide-character string"
msgstr ""

#: lib/dpkg/strwide.c:113
#, c-format
msgid "cannot convert multibyte sequence '%s' to a wide character"
msgstr ""

#: lib/dpkg/subproc.c:55
#, c-format
msgid "unable to ignore signal %s before running %.250s"
msgstr "無法在執行 %2$.250s 前，忽略信號 %1$s"

#: lib/dpkg/subproc.c:68
#, c-format
msgid "error un-catching signal %s: %s\n"
msgstr "錯誤，無法捕捉到的訊號 %s：%s\n"

#: lib/dpkg/subproc.c:78
#, c-format
msgid "%s (subprocess): %s\n"
msgstr "%s（子程序）：%s\n"

#: lib/dpkg/subproc.c:89 utils/update-alternatives.c:411
msgid "fork failed"
msgstr "fork 失敗"

#: lib/dpkg/subproc.c:119
#, c-format
msgid "subprocess %s returned error exit status %d"
msgstr "子程序 %s 傳回了錯誤退出狀態 %d"

#: lib/dpkg/subproc.c:128
#, c-format
msgid "subprocess %s was interrupted"
msgstr "子程序 %s 中斷"

#: lib/dpkg/subproc.c:130
#, c-format
msgid "subprocess %s was killed by signal (%s)%s"
msgstr "子程序 %s 被信號 (%s)%s 終止了"

#: lib/dpkg/subproc.c:132
msgid ", core dumped"
msgstr ", core dumped"

#: lib/dpkg/subproc.c:134
#, c-format
msgid "subprocess %s failed with wait status code %d"
msgstr "子程序 %s 失敗，並傳回了 wait 狀態碼 %d"

#: lib/dpkg/subproc.c:151 utils/update-alternatives.c:418
#, c-format
msgid "wait for subprocess %s failed"
msgstr "等待子程序 %s 時失敗"

#: lib/dpkg/trigdeferred.l:73
#, c-format
msgid "invalid package name `%.250s' in triggers deferred file `%.250s'"
msgstr "不正確的套件名稱 `%.250s'，位於觸發程式延遲檔 `%.250s'"

#: lib/dpkg/trigdeferred.l:82
#, c-format
msgid "truncated triggers deferred file `%.250s'"
msgstr "被截短的觸發程式延遲檔 `%.250s'"

#: lib/dpkg/trigdeferred.l:86
#, c-format
msgid "syntax error in triggers deferred file `%.250s' at character `%s'%s"
msgstr "在觸發程式延遲檔 `%.250s' 裡的字元 `%s'%s 裡的語法有誤"

#: lib/dpkg/trigdeferred.l:135
#, c-format
msgid "unable to open/create triggers lockfile `%.250s'"
msgstr "無法開啟/建立觸發程式鎖定檔 `%.250s'"

#: lib/dpkg/trigdeferred.l:142
msgid "triggers area"
msgstr "觸發程式區"

#: lib/dpkg/trigdeferred.l:152
#, c-format
msgid "unable to stat triggers deferred file `%.250s'"
msgstr "無法取得觸發程式延遲檔 `%.250s' 的檔案資訊"

#: lib/dpkg/trigdeferred.l:166
#, c-format
msgid "unable to open triggers deferred file `%.250s'"
msgstr "無法開啟觸發程式延遲檔 `%.250s'"

#: lib/dpkg/trigdeferred.l:180
#, c-format
msgid "unable to open/create new triggers deferred file `%.250s'"
msgstr "無法開啟/建立新的觸發程式延遲檔 `%.250s'"

#: lib/dpkg/trigdeferred.l:216
#, c-format
msgid "error reading triggers deferred file `%.250s'"
msgstr "在讀取觸發程式延遲檔 `%.250s' 時發生錯誤"

#: lib/dpkg/trigdeferred.l:224
#, c-format
msgid "unable to write new triggers deferred file `%.250s'"
msgstr "無法寫入新的觸發程式延遲檔 `%.250s'"

#: lib/dpkg/trigdeferred.l:229
#, c-format
msgid "unable to close new triggers deferred file `%.250s'"
msgstr "無法關閉新的觸發程式延遲檔 `%.250s'"

#: lib/dpkg/trigdeferred.l:233
#, c-format
msgid "unable to install new triggers deferred file `%.250s'"
msgstr "無法安裝新的觸發程式延遲檔 `%.250s'"

#: lib/dpkg/triglib.c:228
#, c-format
msgid ""
"invalid or unknown syntax in trigger name `%.250s' (in trigger interests for "
"package `%.250s')"
msgstr "觸發名稱 `%.250s' 語法不正確或未知（在套件 `%.250s' 的觸發條件中）"

#: lib/dpkg/triglib.c:269
#, c-format
msgid "failed to open trigger interest list file `%.250s'"
msgstr "無法開啟觸發條件檔 `%.250s'"

#: lib/dpkg/triglib.c:297
#, c-format
msgid "failed to rewind trigger interest file `%.250s'"
msgstr "無法回到觸發條件檔 `%.250s' 的開頭"

#: lib/dpkg/triglib.c:312
#, c-format
msgid ""
"trigger interest file `%.250s' syntax error; illegal package name `%.250s': "
"%.250s"
msgstr "觸發條件檔 `%.250s' 的語法有誤；不合法的套件名稱 `%.250s'：%.250s"

#: lib/dpkg/triglib.c:430
#, c-format
msgid ""
"duplicate file trigger interest for filename `%.250s' and package `%.250s'"
msgstr "檔名 `%.250s' 和套件 `%.250s' 的檔案觸發條件重複"

#: lib/dpkg/triglib.c:501
#, c-format
msgid "unable to read file triggers file `%.250s'"
msgstr "無法讀取 file trigger 檔 `%.250s'"

#: lib/dpkg/triglib.c:512
#, c-format
msgid "syntax error in file triggers file `%.250s'"
msgstr "在 file trigger 檔 `%.255s' 裡的語法有誤"

#: lib/dpkg/triglib.c:524
#, c-format
msgid ""
"file triggers record mentions illegal package name `%.250s' (for interest in "
"file `%.250s'): %.250s"
msgstr ""
"檔案觸發記錄中，包含不合法的套件名稱 `%.250s'（在檔案 `%.250s' 的觸發條件"
"裡）：%.250s"

#: lib/dpkg/triglib.c:663
#, c-format
msgid ""
"triggers ci file `%.250s' contains illegal trigger syntax in trigger name `"
"%.250s': %.250s"
msgstr ""
"觸發程式 ci 檔 `%.250s' 的觸發程式名稱 `%.250s' 不合於觸發程式的語法：%.250s"

#: lib/dpkg/triglib.c:683
#, c-format
msgid "unable to open triggers ci file `%.250s'"
msgstr "無法開啟觸發程式 ci 檔 `%.250s'"

#: lib/dpkg/triglib.c:698
msgid "triggers ci file contains unknown directive syntax"
msgstr "觸發程式 ci 檔包含了未知的指令語法"

#: lib/dpkg/triglib.c:711
#, c-format
msgid "triggers ci file contains unknown directive `%.250s'"
msgstr "觸發程式 ci 檔包含了未知的指令 `%.250s'"

#: lib/dpkg/triglib.c:777
#, c-format
msgid "unable to create triggers state directory `%.250s'"
msgstr "無法建立觸發程式狀態目錄 `%.250s'"

#: lib/dpkg/triglib.c:780
#, c-format
msgid "unable to set ownership of triggers state directory `%.250s'"
msgstr "無法設定觸發程式狀態目錄 `%.250s' 的所有權"

#: lib/dpkg/trigname.c:34
msgid "empty trigger names are not permitted"
msgstr "觸發程式的名稱不可為空的"

#: lib/dpkg/trigname.c:38
msgid "trigger name contains invalid character"
msgstr "觸發程式的名稱包含了不合法的字元"

#: lib/dpkg/utils.c:56
#, c-format
msgid "read error in `%.250s'"
msgstr "在 `%.250s' 中讀取錯誤"

#: lib/dpkg/utils.c:61
#, c-format
msgid "fgets gave an empty string from `%.250s'"
msgstr "fgets 從 `%.250s' 取得了一個空字串"

#: lib/dpkg/utils.c:63
#, c-format
msgid "too-long line or missing newline in `%.250s'"
msgstr "在 `%.250s' 裡的文字太長，或少了換行符號"

#: lib/dpkg/utils.c:75
#, c-format
msgid "unexpected eof reading `%.250s'"
msgstr "由 `%.250s' 意外讀到 eof"

#: lib/dpkg/varbuf.c:82 lib/dpkg/varbuf.c:88
msgid "error formatting string into varbuf variable"
msgstr "將字串格式化存入 varbuf 變數時，發生錯誤"

#: src/archives.c:244
msgid "error reading from dpkg-deb pipe"
msgstr "由 dpkg-deb 的輸入轉向讀取資料時，發生錯誤"

#: src/archives.c:259
#, c-format
msgid "cannot skip padding for file '%.255s': %s"
msgstr "無法跳過 '%.255s' 檔尾的空白：%s"

#: src/archives.c:272
#, c-format
msgid "cannot skip file '%.255s' (replaced or excluded?) from pipe: %s"
msgstr "無法由輸入轉向中，跳過檔案 '%.255s'（取代或排除掉了？）：%s"

#: src/archives.c:334
#, c-format
msgid "unable to create `%.255s' (while processing `%.255s')"
msgstr "處理 `%2$.255s' 時，無法產生 `%1$.255s'"

#: src/archives.c:342
#, c-format
msgid "cannot copy extracted data for '%.255s' to '%.255s': %s"
msgstr "無法將 '%.255s' 的解壓縮資料複製到 '%.250s'：%s"

#: src/archives.c:358 src/archives.c:475 src/statcmd.c:159
#, c-format
msgid "error setting ownership of `%.255s'"
msgstr "在替 `%.255s' 設定所有權時發生錯誤"

#: src/archives.c:360 src/archives.c:477 src/statcmd.c:161
#, c-format
msgid "error setting permissions of `%.255s'"
msgstr "在替 `%.255s' 設定權限時發生錯誤"

#: src/archives.c:368 src/archives.c:1211 src/archives.c:1252
#, c-format
msgid "error closing/writing `%.255s'"
msgstr "在關閉/寫入 `%.255s' 時發生錯誤"

#: src/archives.c:372
#, c-format
msgid "error creating pipe `%.255s'"
msgstr "在建立輸出入轉向 `%.255s' 時發生錯誤"

#: src/archives.c:377 src/archives.c:382
#, c-format
msgid "error creating device `%.255s'"
msgstr "在建立裝置檔 `%.255s' 時發生錯誤"

#: src/archives.c:396 src/infodb-upgrade.c:146 src/infodb-upgrade.c:166
#, c-format
msgid "error creating hard link `%.255s'"
msgstr "在建立實體連結 `%.255s' 時發生錯誤"

#: src/archives.c:403 utils/update-alternatives.c:483
#, c-format
msgid "error creating symbolic link `%.255s'"
msgstr "在建立符號連結 `%.255s' 時發生錯誤"

#: src/archives.c:409
#, c-format
msgid "error creating directory `%.255s'"
msgstr "在建立目錄 `%.255s' 時發生錯誤"

#: src/archives.c:428
#, c-format
msgid "cannot compute MD5 hash for tar file '%.255s': %s"
msgstr "無法計算 tar 檔 '%.255s' 的 MD5 雜湊值：%s"

#: src/archives.c:456 src/archives.c:460
#, c-format
msgid "error setting timestamps of `%.255s'"
msgstr "在替 `%.255s' 設定時間戳記時發生錯誤"

#: src/archives.c:472
#, c-format
msgid "error setting ownership of symlink `%.255s'"
msgstr "在替符號連結 `%.255s' 設定所有權時發生錯誤"

#: src/archives.c:509
msgid "cannot open security status notification channel"
msgstr ""

#: src/archives.c:524
msgid "cannot get security labeling handle"
msgstr ""

#: src/archives.c:572
#, fuzzy, c-format
#| msgid "cannot extract control file '%s' from '%s': %s"
msgid "cannot set security context for file object '%s'"
msgstr "無法由 '%2$s' 讀取設定檔 '%1$s'：%3$s"

#: src/archives.c:601 src/archives.c:1135 utils/update-alternatives.c:319
#, c-format
msgid "unable to read link `%.255s'"
msgstr "無法讀取符號連結 `%.255s'"

#: src/archives.c:603 src/archives.c:1137 src/configure.c:760
#, c-format
msgid "symbolic link '%.250s' size has changed from %jd to %zd"
msgstr "符號連結 '%.250s' 的大小由 %jd 變為 %zd"

#: src/archives.c:640
#, c-format
msgid ""
"trying to overwrite shared '%.250s', which is different from other instances "
"of package %.250s"
msgstr "正要覆蓋共用檔 '%.250s'，它是套件 %.250s 的另一個不同檔案"

#: src/archives.c:730
#, c-format
msgid "failed to stat (dereference) existing symlink `%.250s'"
msgstr "無法取得（反引用）已存在的符號連結 `%.250s' 的檔案資訊"

#: src/archives.c:752
#, c-format
msgid ""
"failed to stat (dereference) proposed new symlink target `%.250s' for "
"symlink `%.250s'"
msgstr ""
"無法取得（反引用）將要指向新符號連結 `%.250s' 的符號連結 `%.250s' 的檔案資訊"

#: src/archives.c:810
#, c-format
msgid ""
"trying to overwrite `%.250s', which is the diverted version of `"
"%.250s' (package: %.100s)"
msgstr "試圖覆蓋 `%.250s'，它是 `%.250s'（套件：%.100s）移轉後的版本"

#: src/archives.c:816
#, c-format
msgid "trying to overwrite `%.250s', which is the diverted version of `%.250s'"
msgstr "試圖覆蓋 `%.250s'，它是 `%.250s' 移轉後的版本"

#: src/archives.c:846
#, c-format
msgid "unable to stat `%.255s' (which I was about to install)"
msgstr "無法取得 `%.255s' 的檔案資訊（正要安裝這個檔案）"

#: src/archives.c:854
#, c-format
msgid ""
"unable to clean up mess surrounding `%.255s' before installing another "
"version"
msgstr "在安裝另一版本前，無法清理 `%.255s' 的混亂狀態"

#: src/archives.c:860
#, c-format
msgid "unable to stat restored `%.255s' before installing another version"
msgstr "在安裝另一版本前，無法取得回復後的 `%.255s' 的檔案資訊"

#: src/archives.c:896
#, c-format
msgid "archive contained object `%.255s' of unknown type 0x%x"
msgstr "壓縮檔包含物件 `%.255s'，型別 0x%x 不名"

#: src/archives.c:978 src/divertcmd.c:148 utils/update-alternatives.c:625
#: utils/update-alternatives.c:1234 utils/update-alternatives.c:1302
#: utils/update-alternatives.c:1460 utils/update-alternatives.c:1724
#: utils/update-alternatives.c:2221 utils/update-alternatives.c:2269
#: utils/update-alternatives.c:2444
#, c-format
msgid "cannot stat file '%s'"
msgstr "無法取得檔案 '%s' 的檔案資訊"

#: src/archives.c:993
#, fuzzy, c-format
#| msgid "Replacing files in old package %s ...\n"
msgid "Replacing files in old package %s (%s) ...\n"
msgstr "替換成舊套件 %s 的檔案...\n"

#: src/archives.c:999
#, fuzzy, c-format
#| msgid "Replaced by files in installed package %s ...\n"
msgid "Replaced by files in installed package %s (%s) ...\n"
msgstr "被替換成已安裝套件 %s 裡的檔案...\n"

#: src/archives.c:1009
#, c-format
msgid ""
"trying to overwrite directory '%.250s' in package %.250s %.250s with "
"nondirectory"
msgstr "正要用套件 %2$.250s %3$.250s 裡一個普通檔案，取代目錄 '%1$.250s'"

#: src/archives.c:1016
#, c-format
msgid "trying to overwrite '%.250s', which is also in package %.250s %.250s"
msgstr "正要取代 '%.250s'，它也是套件 %.250s %.250s 的檔案"

#: src/archives.c:1125
#, c-format
msgid "unable to move aside `%.255s' to install new version"
msgstr "無法將 `%.255s' 移開以安裝新的版本"

#: src/archives.c:1142
#, c-format
msgid "unable to make backup symlink for `%.255s'"
msgstr "無法替 `%.255s' 做一個符號連結備份"

#: src/archives.c:1144
#, c-format
msgid "unable to chown backup symlink for `%.255s'"
msgstr "無法 chown `%.255s' 的符號連結備份"

#: src/archives.c:1149
#, c-format
msgid "unable to make backup link of `%.255s' before installing new version"
msgstr "無法在安裝新的版本前，為 `%.255s' 做一個符號連結備份"

#: src/archives.c:1166 src/archives.c:1260
#, c-format
msgid "unable to install new version of `%.255s'"
msgstr "無法安裝 `%.255s' 的新版本"

#: src/archives.c:1205 src/archives.c:1248
#, c-format
msgid "unable to open '%.255s'"
msgstr "無法建立 '%.255s'"

#: src/archives.c:1250
#, c-format
msgid "unable to sync file '%.255s'"
msgstr "無法同步檔案 '%.255s' 的寫入緩衝"

#: src/archives.c:1327
#, c-format
msgid ""
"ignoring dependency problem with %s:\n"
"%s"
msgstr ""
"忽略 %s 的相依問題：\n"
"%s"

#: src/archives.c:1332
#, c-format
msgid ""
"considering deconfiguration of essential\n"
" package %s, to enable %s"
msgstr ""
"正打算清除核心套件 %s\n"
" 的設定，以啟用 %s"

#: src/archives.c:1336
#, c-format
msgid ""
"no, %s is essential, will not deconfigure\n"
" it in order to enable %s"
msgstr ""
"不行，%s 是核心套件，\n"
"不會為了啟用 %s 而清除它的設定"

#: src/archives.c:1345
#, c-format
msgid ""
"no, cannot proceed with %s (--auto-deconfigure will help):\n"
"%s"
msgstr ""
"不行，無法繼續 %s（試試 --auto-deconfigure）：\n"
"%s"

#: src/archives.c:1355
#, c-format
msgid "removal of %.250s"
msgstr "%.250s 的移除作業"

#: src/archives.c:1380
#, c-format
msgid "installation of %.250s"
msgstr "%.250s 的安裝作業"

#: src/archives.c:1382
#, c-format
msgid "considering deconfiguration of %s, which would be broken by %s ..."
msgstr "正打算清除 %s 的設定，因為會被 %s 破壞..."

#: src/archives.c:1388
#, c-format
msgid "yes, will deconfigure %s (broken by %s)"
msgstr "好，會清除 %s 的設定（被 %s 破壞）"

#: src/archives.c:1393 src/archives.c:1514
#, c-format
msgid ""
"regarding %s containing %s:\n"
"%s"
msgstr ""
"關於包含 %2$s 的 %1$s：\n"
"%3$s"

#: src/archives.c:1401
msgid "ignoring breakage, may proceed anyway!"
msgstr "忽略損壞，將強制繼續安裝！"

#: src/archives.c:1406
#, c-format
msgid ""
"installing %.250s would break %.250s, and\n"
" deconfiguration is not permitted (--auto-deconfigure might help)"
msgstr ""
"安裝 %.250s 將會毀損 %.250s，\n"
" 且不打算要清除設定（--auto-deconfigure 也許有用）"

#: src/archives.c:1411
#, c-format
msgid "installing %.250s would break existing software"
msgstr "安裝 %.250s 將會毀損現有的軟體"

#: src/archives.c:1441
#, c-format
msgid "considering removing %s in favour of %s ..."
msgstr "為了 %2$s，正打算移除 %1$s ..."

#: src/archives.c:1447
#, c-format
msgid "%s is not properly installed; ignoring any dependencies on it"
msgstr "%s 未被正確安裝 - 忽略它所有的相依關係"

#: src/archives.c:1476
#, c-format
msgid "may have trouble removing %s, as it provides %s ..."
msgstr "移除 %s 會出問題，因為它提供了 %s ..."

#: src/archives.c:1491
#, c-format
msgid ""
"package %s requires reinstallation, but will remove anyway as you requested"
msgstr "套件 %s 需要重新安裝，但還是應您的要求將其強制移除"

#: src/archives.c:1495
#, c-format
msgid "package %s requires reinstallation, will not remove"
msgstr "套件 %s 需要重新安裝，不會移除"

#: src/archives.c:1504
#, c-format
msgid "yes, will remove %s in favour of %s"
msgstr "好，會為了 %2$s 移除 %1$s"

#: src/archives.c:1517
#, c-format
msgid "conflicting packages - not installing %.250s"
msgstr "套件衝突 - 不會安裝 %.250s"

#: src/archives.c:1519
msgid "ignoring conflict, may proceed anyway!"
msgstr "忽略衝突，強制繼續安裝！"

#: src/archives.c:1565
#, c-format
msgid "--%s --recursive needs at least one path argument"
msgstr "--%s --recursive 需要至少一個路徑作為參數"

#: src/archives.c:1575
msgid "find for dpkg --recursive"
msgstr "為 dpkg --recursive 搜尋"

#: src/archives.c:1596
msgid "failed to fdopen find's pipe"
msgstr "無法 fdopen find 的輸出入轉向"

#: src/archives.c:1602
msgid "error reading find's pipe"
msgstr "在讀取 find 的輸出入轉向時發生錯誤"

#: src/archives.c:1603
msgid "error closing find's pipe"
msgstr "在關閉 find 的輸出入轉向時發生錯誤"

#: src/archives.c:1606
#, c-format
msgid "find for --recursive returned unhandled error %i"
msgstr "--recursive 選項所呼叫的 find 返回了未被處理的錯誤 %i"

#: src/archives.c:1609
msgid "searched, but found no packages (files matching *.deb)"
msgstr "已搜尋，但是找不到套件（符合 *.deb 的檔案）"

#: src/archives.c:1620
#, c-format
msgid "--%s needs at least one package archive file argument"
msgstr "--%s 需要至少一個套件壓縮檔作為參數"

#: src/archives.c:1657 src/divertcmd.c:76 src/divertcmd.c:116
#: src/enquiry.c:215 src/enquiry.c:332 src/enquiry.c:523 src/enquiry.c:525
#: src/enquiry.c:538 src/enquiry.c:568 src/main.c:67 src/main.c:171
#: src/main.c:322 src/main.c:615 src/packages.c:266 src/querycmd.c:306
#: src/querycmd.c:408 src/querycmd.c:455 src/querycmd.c:464 src/querycmd.c:510
#: src/querycmd.c:593 src/querycmd.c:781 src/querycmd.c:829 src/select.c:99
#: src/statcmd.c:64 src/statcmd.c:94 src/trigcmd.c:57 src/trigcmd.c:89
#: dpkg-deb/build.c:492 dpkg-deb/extract.c:225 dpkg-deb/extract.c:261
#: dpkg-deb/info.c:205 dpkg-deb/info.c:267 dpkg-deb/main.c:61
#: dpkg-deb/main.c:133 dpkg-split/info.c:266 dpkg-split/main.c:55
#: dpkg-split/main.c:99 dpkg-split/queue.c:156 dpkg-split/queue.c:298
msgid "<standard output>"
msgstr "<標準輸出>"

#: src/archives.c:1658 src/packages.c:267 src/querycmd.c:307
#: src/querycmd.c:406 src/querycmd.c:516 src/querycmd.c:594 src/select.c:100
#: dpkg-split/main.c:170 dpkg-split/queue.c:234
msgid "<standard error>"
msgstr "<標準錯誤>"

#: src/archives.c:1701
#, c-format
msgid "Selecting previously unselected package %s.\n"
msgstr "選取了原先未選的套件 %s。\n"

#: src/archives.c:1705
#, c-format
msgid "Skipping unselected package %s.\n"
msgstr "略過未選的套件 %s。\n"

#: src/archives.c:1722
#, c-format
msgid "version %.250s of %.250s already installed, skipping"
msgstr "已安裝 %.250s 版的 %.250s，略過"

#: src/archives.c:1731
#, c-format
msgid "downgrading %.250s from %.250s to %.250s"
msgstr "將 %.250s 從 %.250s 降級到 %.250s"

#: src/archives.c:1737
#, c-format
msgid "will not downgrade %.250s from %.250s to %.250s, skipping"
msgstr "不會將 %.250s 從 %.250s 降級到 %.250s，略過"

#: src/cleanup.c:87
#, c-format
msgid ""
"unable to remove newly-installed version of `%.250s' to allow reinstallation "
"of backup copy"
msgstr "無法移除 `%.250s' 的新安裝版本以便能重新以備份副本安裝"

#: src/cleanup.c:94
#, c-format
msgid "unable to restore backup version of `%.250s'"
msgstr "無法回復為 `%.250s' 的備份版本"

#: src/cleanup.c:98
#, c-format
msgid "unable to remove backup copy of '%.250s'"
msgstr "無法刪除 '%.250s' 的備份檔"

#: src/cleanup.c:102
#, c-format
msgid "unable to remove newly-installed version of `%.250s'"
msgstr "無法移除 `%.250s' 的新安裝版本"

#: src/cleanup.c:109
#, c-format
msgid "unable to remove newly-extracted version of `%.250s'"
msgstr "無法移除 `%.250s' 的新解壓版本"

#: src/configure.c:98
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "Configuration file `%s'"
msgid "Configuration file '%s'\n"
msgstr ""
"\n"
"設定檔 `%s'"

#: src/configure.c:100
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "Configuration file `%s'"
msgid "Configuration file '%s' (actually '%s')\n"
msgstr ""
"\n"
"設定檔 `%s'"

#: src/configure.c:105
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| " ==> File on system created by you or by a script.\n"
#| " ==> File also in package provided by package maintainer.\n"
msgid ""
" ==> File on system created by you or by a script.\n"
" ==> File also in package provided by package maintainer.\n"
msgstr ""
"\n"
" ==> 系統中的這個檔案是由您建立或者是由 script 建立的。\n"
" ==> 套件維護者所提供的套件中也包含了該檔案。\n"

#: src/configure.c:109
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "     Not modified since installation.\n"
msgid "     Not modified since installation.\n"
msgstr ""
"\n"
"     在安裝後未曾更動。\n"

#: src/configure.c:111
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| " ==> Modified (by you or by a script) since installation.\n"
msgid " ==> Modified (by you or by a script) since installation.\n"
msgstr ""
"\n"
" ==> 在安裝後曾被（您或某個 script）修改過。\n"

#: src/configure.c:112
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| " ==> Deleted (by you or by a script) since installation.\n"
msgid " ==> Deleted (by you or by a script) since installation.\n"
msgstr ""
"\n"
" ==> 在安裝後被（您或某個 script）刪掉了。\n"

#: src/configure.c:115
#, c-format
msgid " ==> Package distributor has shipped an updated version.\n"
msgstr " ==> 套件的提交者提供了一個更新版本。\n"

#: src/configure.c:116
#, c-format
msgid "     Version in package is the same as at last installation.\n"
msgstr "     套件的版本和上次安裝的版本是相同的。\n"

#: src/configure.c:125
#, c-format
msgid " ==> Using new file as you requested.\n"
msgstr " ==> 按照您的要求，使用新的檔案。\n"

#: src/configure.c:129
#, c-format
msgid " ==> Using current old file as you requested.\n"
msgstr " ==> 按照您的要求，保留原有的舊檔案。\n"

#: src/configure.c:138
#, c-format
msgid " ==> Keeping old config file as default.\n"
msgstr " ==> 預設上是保留原有的設定檔。\n"

#: src/configure.c:142
#, c-format
msgid " ==> Using new config file as default.\n"
msgstr " ==> 預設上是使用新的設定檔。\n"

#: src/configure.c:148
#, c-format
msgid ""
"   What would you like to do about it ?  Your options are:\n"
"    Y or I  : install the package maintainer's version\n"
"    N or O  : keep your currently-installed version\n"
"      D     : show the differences between the versions\n"
"      Z     : start a shell to examine the situation\n"
msgstr ""
"   您要如何處理？選項如下：\n"
"    Y 或 I  ：安裝套件維護者所提供的版本\n"
"    N 或 O  ：保留您原本安裝的版本\n"
"      D     ：顯示兩者有何不同\n"
"      Z     ：開啟命令列，以研判問題\n"

#: src/configure.c:156
#, c-format
msgid " The default action is to keep your current version.\n"
msgstr " 預設的動作是保留您目前使用的版本。\n"

#: src/configure.c:159
#, c-format
msgid " The default action is to install the new version.\n"
msgstr " 預設的動作是安裝新的版本。\n"

#: src/configure.c:163
msgid "[default=N]"
msgstr "[預設=N]"

#: src/configure.c:164
msgid "[default=Y]"
msgstr "[預設=Y]"

#: src/configure.c:165
msgid "[no default]"
msgstr "[無預設值]"

#: src/configure.c:168
msgid "error writing to stderr, discovered before conffile prompt"
msgstr "在 conffile 提示輸入之前，發現寫入 stderr 錯誤"

#: src/configure.c:177
msgid "read error on stdin at conffile prompt"
msgstr "在 conffile 提示輸入時，發現讀取 stdin 錯誤"

#: src/configure.c:178
msgid "EOF on stdin at conffile prompt"
msgstr "在 conffile 提示輸入時，由 stdin 中讀到了 EOF"

#: src/configure.c:211 src/configure.c:215
msgid "conffile difference visualizer"
msgstr "conffile 差異顯示程式"

#: src/configure.c:232
msgid "Type `exit' when you're done.\n"
msgstr "完成後，請輸入 `exit'。\n"

#: src/configure.c:241 src/configure.c:245
msgid "conffile shell"
msgstr "conffile 命令列"

#: src/configure.c:403
#, c-format
msgid "unable to stat new distributed conffile '%.250s'"
msgstr "無法取得新發佈的 conffile '%.250s' 的檔案資訊"

#: src/configure.c:413
#, c-format
msgid "unable to stat current installed conffile `%.250s'"
msgstr "無法取得現已安裝的 conffile `%.250s' 的檔案資訊"

#: src/configure.c:425
#, c-format
msgid ""
"\n"
"Configuration file `%s', does not exist on system.\n"
"Installing new config file as you requested.\n"
msgstr ""
"\n"
"在系統中找不到設定檔 `%s'。\n"
"應您的要求，安裝新的設定檔。\n"

#: src/configure.c:467
#, c-format
msgid "%s: failed to remove old backup '%.250s': %s"
msgstr "%s：無法刪除舊備份檔 '%.250s'：%s"

#: src/configure.c:476
#, c-format
msgid "%s: failed to rename '%.250s' to '%.250s': %s"
msgstr "%s：無法將 '%.250s' 重新命名為 '%.250s'：%s"

#: src/configure.c:483
#, c-format
msgid "%s: failed to remove '%.250s': %s"
msgstr "%s：無法刪除 '%s'：%s"

#: src/configure.c:490
#, c-format
msgid "%s: failed to remove old distributed version '%.250s': %s"
msgstr "%s：無法移除舊發佈版 '%.250s'：%s"

#: src/configure.c:495
#, c-format
msgid "%s: failed to remove '%.250s' (before overwrite): %s"
msgstr "%s：無法在取代檔案前，刪除 '%.250s'：%s"

#: src/configure.c:500
#, c-format
msgid "%s: failed to link '%.250s' to '%.250s': %s"
msgstr "%s：無法建立 '%.250s' 指向 '%.250s' 的連結：%s"

#: src/configure.c:505
#, c-format
msgid "Installing new version of config file %s ...\n"
msgstr "安裝新版的設定檔 %s ...\n"

#: src/configure.c:511 utils/update-alternatives.c:490
#, c-format
msgid "unable to install `%.250s' as `%.250s'"
msgstr "無法將 `%.250s' 安裝為 `%.250s'"

#: src/configure.c:563
#, c-format
msgid "no package named `%s' is installed, cannot configure"
msgstr "未曾安裝名為 `%s' 的套件，無法設定"

#: src/configure.c:566
#, c-format
msgid "package %.250s is already installed and configured"
msgstr "套件 %.250s 已安裝並設定完成"

#: src/configure.c:569
#, c-format
msgid ""
"package %.250s is not ready for configuration\n"
" cannot configure (current status `%.250s')"
msgstr ""
"套件 %.250s 還無法設定\n"
" 不能設定（目前狀態 `%.250s'）"

#: src/configure.c:581
#, c-format
msgid ""
"package %s cannot be configured because %s is not ready (current status '%s')"
msgstr "%2$s 尚未準備好（目前的狀態為 '%3$s'），套件 %1$s 無法設定"

#: src/configure.c:589
#, c-format
msgid ""
"package %s %s cannot be configured because %s is at a different version (%s)"
msgstr "%3$s 版本 (%4$s) 不同，套件 %1$s %2$s 無法設定"

#: src/configure.c:625
#, c-format
msgid ""
"dependency problems prevent configuration of %s:\n"
"%s"
msgstr ""
"因相依問題，無法設定 %s：\n"
"%s"

#: src/configure.c:628
msgid "dependency problems - leaving unconfigured"
msgstr "相依問題 - 保留未設定"

#: src/configure.c:631
#, c-format
msgid ""
"%s: dependency problems, but configuring anyway as you requested:\n"
"%s"
msgstr ""
"%s：相依問題，但還是依您要求強制設定：\n"
"%s"

#: src/configure.c:639
#, fuzzy
#| msgid ""
#| "Package is in a very bad inconsistent state - you should\n"
#| " reinstall it before attempting configuration."
msgid ""
"package is in a very bad inconsistent state; you should\n"
" reinstall it before attempting configuration"
msgstr ""
"套件正處於非常不穩定的狀態\n"
" - 您最好在設定之前，先重新安裝。"

#: src/configure.c:642
#, c-format
msgid "Setting up %s (%s) ...\n"
msgstr "設定 %s (%s) ...\n"

#: src/configure.c:729
#, c-format
msgid ""
"%s: unable to stat config file '%s'\n"
" (= '%s'): %s"
msgstr ""
"%s：無法取得設定檔 '%s' 的檔案資訊\n"
" (= '%s')：%s"

#: src/configure.c:743
#, c-format
msgid ""
"%s: config file '%s' is a circular link\n"
" (= '%s')"
msgstr ""
"%s：設定檔 '%s' 是循環連結\n"
" (= '%s')"

#: src/configure.c:754
#, c-format
msgid ""
"%s: unable to readlink conffile '%s'\n"
" (= '%s'): %s"
msgstr ""
"%s：無法 readlink conffile '%s'\n"
" (= '%s')：%s"

#: src/configure.c:781
#, c-format
msgid ""
"%s: conffile '%.250s' resolves to degenerate filename\n"
" ('%s' is a symlink to '%s')"
msgstr ""
"%s：conffile '%.250s' 指向了有問題的檔名\n"
"（'%s' 是指向 '%s' 的符號連結）"

#: src/configure.c:797
#, c-format
msgid "%s: conffile '%.250s' is not a plain file or symlink (= '%s')"
msgstr "%s：conffile '%.250s' 並非普通檔案或符號連結 (= '%s')"

#: src/configure.c:825 dpkg-split/split.c:142
#, c-format
msgid "cannot compute MD5 hash for file '%s': %s"
msgstr "無法計算 '%s' 的 MD5 雜湊值：%s"

#: src/configure.c:832
#, c-format
msgid "%s: unable to open %s for hash: %s"
msgstr "%s：無法開啟 %s 計算雜湊：%s"

#: src/depcon.c:246
#, c-format
msgid "%s depends on %s"
msgstr "%s 相依於 %s"

#: src/depcon.c:249
#, c-format
msgid "%s pre-depends on %s"
msgstr "%s 預先相依於 %s"

#: src/depcon.c:252
#, c-format
msgid "%s recommends %s"
msgstr "%s 推薦 %s"

#: src/depcon.c:255
#, c-format
msgid "%s suggests %s"
msgstr "%s 建議 %s"

#: src/depcon.c:258
#, c-format
msgid "%s breaks %s"
msgstr "%s 會損毀 %s"

#: src/depcon.c:261
#, c-format
msgid "%s conflicts with %s"
msgstr "%s 衝突於 %s"

#: src/depcon.c:264
#, c-format
msgid "%s enhances %s"
msgstr "%s 加強了 %s"

#: src/depcon.c:372
#, c-format
msgid "  %.250s is to be removed.\n"
msgstr "  即將移除 %.250s。\n"

#: src/depcon.c:376
#, c-format
msgid "  %.250s is to be deconfigured.\n"
msgstr "  即將清除 %.250s 的設定。\n"

#: src/depcon.c:384
#, c-format
msgid "  %.250s is to be installed, but is version %.250s.\n"
msgstr "  即將安裝 %.250s，不過卻是版本 %.250s。\n"

#: src/depcon.c:398
#, c-format
msgid "  %.250s is installed, but is version %.250s.\n"
msgstr "  已安裝了 %.250s，不過卻是版本 %.250s。\n"

#: src/depcon.c:418
#, c-format
msgid "  %.250s is unpacked, but has never been configured.\n"
msgstr "  已解開了 %.250s，但是它還沒有被設定過。\n"

#: src/depcon.c:423
#, c-format
msgid "  %.250s is unpacked, but is version %.250s.\n"
msgstr "  已經解開了 %.250s，不過卻是版本 %.250s。\n"

#: src/depcon.c:432
#, c-format
msgid "  %.250s latest configured version is %.250s.\n"
msgstr "  上次設定 %.250s 時，版本為 %.250s。\n"

#: src/depcon.c:444
#, c-format
msgid "  %.250s is %s.\n"
msgstr "  %.250s 現為 %s。\n"

#: src/depcon.c:482
#, c-format
msgid "  %.250s provides %.250s but is to be removed.\n"
msgstr "  %.250s 提供了 %.250s，但會被移除。\n"

#: src/depcon.c:487
#, c-format
msgid "  %.250s provides %.250s but is to be deconfigured.\n"
msgstr "  %.250s 提供了 %.250s，但要清除它的設定。\n"

#: src/depcon.c:497
#, c-format
msgid "  %.250s provides %.250s but is %s.\n"
msgstr "  %.250s 提供了 %.250s 但現在是 %s。\n"

#: src/depcon.c:512
#, c-format
msgid "  %.250s is not installed.\n"
msgstr "  %.250s 沒有被安裝。\n"

#: src/depcon.c:545
#, c-format
msgid "  %.250s (version %.250s) is to be installed.\n"
msgstr "  即將安裝 %.250s（版本 %.250s）。\n"

#: src/depcon.c:576
#, c-format
msgid "  %.250s (version %.250s) is present and %s.\n"
msgstr "  %.250s（版本 %.250s）已存在且 %s。\n"

#: src/depcon.c:606
#, c-format
msgid "  %.250s provides %.250s and is to be installed.\n"
msgstr "  %.250s 提供了 %.250s，且將會被安裝。\n"

#: src/depcon.c:649
#, c-format
msgid "  %.250s provides %.250s and is present and %s.\n"
msgstr "  %.250s 提供了 %.250s，它已存在且 %s。\n"

#: src/divertcmd.c:53
msgid "Use --help for help about diverting files."
msgstr "請用 --help，參閱檔案移轉的說明。"

#: src/divertcmd.c:69 src/statcmd.c:57 utils/update-alternatives.c:80
#, c-format
msgid "Debian %s version %s.\n"
msgstr "Debian %s 版本 %s。\n"

#: src/divertcmd.c:73 src/main.c:64 src/querycmd.c:778 src/statcmd.c:61
#: src/trigcmd.c:54 dpkg-deb/main.c:58 dpkg-split/main.c:52
#: utils/update-alternatives.c:84
#, c-format
msgid ""
"This is free software; see the GNU General Public License version 2 or\n"
"later for copying conditions. There is NO warranty.\n"
msgstr ""
"這是自由軟體﹔軟體複製的授權條款，請參閱 GNU 通用公用許可證\n"
"第二版或更新的版本。本軟體【不】提供任何保証。\n"

#: src/divertcmd.c:85 src/main.c:82 src/querycmd.c:790 src/statcmd.c:73
#: dpkg-deb/main.c:70 dpkg-split/main.c:64 utils/update-alternatives.c:92
#, c-format
msgid ""
"Usage: %s [<option> ...] <command>\n"
"\n"
msgstr ""
"用法：%s [<選項> ...] <命令>\n"
"\n"

#: src/divertcmd.c:89
#, c-format
msgid ""
"Commands:\n"
"  [--add] <file>           add a diversion.\n"
"  --remove <file>          remove the diversion.\n"
"  --list [<glob-pattern>]  show file diversions.\n"
"  --listpackage <file>     show what package diverts the file.\n"
"  --truename <file>        return the diverted file.\n"
"\n"
msgstr ""
"命令：\n"
"  [--add] <檔案>           新增移轉檔案。\n"
"  --remove <檔案>          刪除移轉檔案。\n"
"  --list [<比對表達式>]    顯示移轉檔案。\n"
"  --listpackage <檔案>     顯示移轉檔案的套件。\n"
"  --truename <檔案>        傳回移轉檔案的原檔名。\n"
"\n"

#: src/divertcmd.c:98
#, c-format
msgid ""
"Options:\n"
"  --package <package>      name of the package whose copy of <file> will "
"not\n"
"                             be diverted.\n"
"  --local                  all packages' versions are diverted.\n"
"  --divert <divert-to>     the name used by other packages' versions.\n"
"  --rename                 actually move the file aside (or back).\n"
"  --admindir <directory>   set the directory with the diversions file.\n"
"  --test                   don't do anything, just demonstrate.\n"
"  --quiet                  quiet operation, minimal output.\n"
"  --help                   show this help message.\n"
"  --version                show the version.\n"
"\n"
msgstr ""
"選項：\n"
"  --package <套件>         <檔案> 不會移轉的套件。\n"
"  --local                  所有套件版本都會移轉。\n"
"  --divert <移轉目標>      其它套件版本用的名稱。\n"
"  --rename                 真的搬移（或回復）檔案。\n"
"  --admindir <目錄>        設定移轉檔的目錄。\n"
"  --test                   不實際進行，僅模擬。\n"
"  --quiet                  安靜模式，儘量不顯示訊息。\n"
"  --help                   顯示這個說明訊息。\n"
"  --version                顯示版本資訊。\n"
"\n"

#: src/divertcmd.c:112
#, c-format
msgid ""
"When adding, default is --local and --divert <original>.distrib.\n"
"When removing, --package or --local and --divert must match if specified.\n"
"Package preinst/postrm scripts should always specify --package and --"
"divert.\n"
msgstr ""
"在新增時，預設為 --local 及 --divert <原始檔>.distrib。\n"
"在移除時，指定 --package 或 --local 及 --divert 須相符。\n"
"套件的 preinst/postrm scripts 一定要指定 --package 及 --divert。\n"

#: src/divertcmd.c:166
#, c-format
msgid "error checking '%s'"
msgstr "檢查 '%s' 時發生錯誤"

#: src/divertcmd.c:201
#, c-format
msgid ""
"rename involves overwriting `%s' with\n"
"  different file `%s', not allowed"
msgstr ""
"重新命名時，會以另一個檔案 `%2$s'\n"
"  蓋過 `%1$s'，所以不可以進行"

#: src/divertcmd.c:222 utils/update-alternatives.c:1391
#, c-format
msgid "unable to create file '%s'"
msgstr "無法建立檔案 '%s'"

#: src/divertcmd.c:227
#, c-format
msgid "cannot copy '%s' to '%s': %s"
msgstr "無法把檔案 '%s' 複製到 '%s'：%s"

#: src/divertcmd.c:239
#, c-format
msgid "cannot rename '%s' to '%s'"
msgstr "無法把 '%s' 重新命名為 '%s'"

#: src/divertcmd.c:254
#, c-format
msgid "rename: remove duplicate old link '%s'"
msgstr "重新命名：刪除重複的舊連結 '%s'"

#: src/divertcmd.c:264
#, c-format
msgid "unable to remove copied source file '%s'"
msgstr "無法刪除來源檔 '%.250s' 的複本"

#: src/divertcmd.c:273 src/divertcmd.c:737
#, c-format
msgid "filename \"%s\" is not absolute"
msgstr "檔名 \"%s\" 不是唯一的"

#: src/divertcmd.c:275
msgid "file may not contain newlines"
msgstr "檔案不該包含換行符號"

#: src/divertcmd.c:295
#, c-format
msgid "local diversion of %s"
msgstr "%s 自行移轉"

#: src/divertcmd.c:297
#, c-format
msgid "local diversion of %s to %s"
msgstr "%s 自行移轉至 %s"

#: src/divertcmd.c:301
#, c-format
msgid "diversion of %s by %s"
msgstr "由 %2$s 移轉 %1$s"

#: src/divertcmd.c:304
#, c-format
msgid "diversion of %s to %s by %s"
msgstr "由 %3$s 移轉 %1$s 至 %2$s"

#: src/divertcmd.c:320
#, c-format
msgid "any diversion of %s"
msgstr "任一 %s 的移轉"

#: src/divertcmd.c:322
#, c-format
msgid "any diversion of %s to %s"
msgstr "任一由 %s 移轉至 %ss"

#: src/divertcmd.c:427 src/divertcmd.c:559 src/divertcmd.c:677
#: src/divertcmd.c:699 src/statcmd.c:271
#, c-format
msgid "--%s needs a single argument"
msgstr "--%s 需要一個參數"

#: src/divertcmd.c:436
#, fuzzy
#| msgid "Cannot divert directories"
msgid "cannot divert directories"
msgstr "無法移轉目錄"

#: src/divertcmd.c:449
#, c-format
msgid "cannot divert file '%s' to itself"
msgstr "無法移轉檔案 '%s' 到自己"

#: src/divertcmd.c:469
#, c-format
msgid "Leaving '%s'\n"
msgstr "不異動 '%s'\n"

#: src/divertcmd.c:474
#, c-format
msgid "`%s' clashes with `%s'"
msgstr "`%s' 和 `%s' 相衝突"

#: src/divertcmd.c:497
#, c-format
msgid "Adding '%s'\n"
msgstr "增加 '%s'\n"

#: src/divertcmd.c:503
#, c-format
msgid "Ignoring request to rename file '%s' owned by diverting package '%s'\n"
msgstr "忽略重新命名移轉套件 '%2$s' 檔案 '%1$s' 的要求\n"

#: src/divertcmd.c:568
#, c-format
msgid "No diversion '%s', none removed.\n"
msgstr "查無移轉項目 '%s'，無可刪除。\n"

#: src/divertcmd.c:583
#, c-format
msgid ""
"mismatch on divert-to\n"
"  when removing `%s'\n"
"  found `%s'"
msgstr ""
"<移轉目標> 不符，\n"
"  在移除 `%s' 時\n"
"  發現 `%s'"

#: src/divertcmd.c:590
#, c-format
msgid ""
"mismatch on package\n"
"  when removing `%s'\n"
"  found `%s'"
msgstr ""
"<套件> 不符，\n"
"  在移除 `%s' 時\n"
"  發現 `%s'"

#: src/divertcmd.c:600
#, c-format
msgid "Ignoring request to remove shared diversion '%s'.\n"
msgstr "忽略刪除共享移轉檔案 '%s' 的要求。\n"

#: src/divertcmd.c:606
#, c-format
msgid "Removing '%s'\n"
msgstr "刪除 '%s'\n"

#: src/divertcmd.c:728
msgid "package may not contain newlines"
msgstr "<套件> 不該包含換行符號"

#: src/divertcmd.c:739
msgid "divert-to may not contain newlines"
msgstr "<移轉目標> 不該包含換行符號"

#: src/divertdb.c:64
msgid "failed to open diversions file"
msgstr "無法開啟移轉檔"

#: src/divertdb.c:69
msgid "failed to fstat diversions file"
msgstr "無法 fstat 取得移轉檔的檔案資訊"

#: src/divertdb.c:122
#, c-format
msgid "conflicting diversions involving `%.250s' or `%.250s'"
msgstr "移轉衝突，涉入其中的有 `%.250s' 及 `%.250s'"

#: src/enquiry.c:95
msgid ""
"The following packages are in a mess due to serious problems during\n"
"installation.  They must be reinstalled for them (and any packages\n"
"that depend on them) to function properly:\n"
msgstr ""
"下列套件因為安裝時發生嚴重問題，現在一片混亂。\n"
"要正常運作，請重新重新安裝這些套件（及所有相依於它們的套件）：\n"

#: src/enquiry.c:102
msgid ""
"The following packages have been unpacked but not yet configured.\n"
"They must be configured using dpkg --configure or the configure\n"
"menu option in dselect for them to work:\n"
msgstr ""
"下列套件已經解開，但尚未設定。要正常運作，\n"
"請用 dpkg --configure 或者 dselect 選單中的 configure 項目設定：\n"

#: src/enquiry.c:109
msgid ""
"The following packages are only half configured, probably due to problems\n"
"configuring them the first time.  The configuration should be retried using\n"
"dpkg --configure <package> or the configure menu option in dselect:\n"
msgstr ""
"下列套件只完成一半的設定，可能是因為第一次設定時出了問題。\n"
"可使用 dpkg --configure <套件> 或者由 dselect 選單中的 configure 項目來\n"
"重新設定套件：\n"

#: src/enquiry.c:116
msgid ""
"The following packages are only half installed, due to problems during\n"
"installation.  The installation can probably be completed by retrying it;\n"
"the packages can be removed using dselect or dpkg --remove:\n"
msgstr ""
"下列套件因為安裝時出問題，只完成一半安裝。再試一次或許可以完成安裝；\n"
"或用 dselect 或 dpkg --remove 移除：\n"

#: src/enquiry.c:123
msgid ""
"The following packages are awaiting processing of triggers that they\n"
"have activated in other packages.  This processing can be requested using\n"
"dselect or dpkg --configure --pending (or dpkg --triggers-only):\n"
msgstr ""
"以下套件正等待執行其它套件啟動的觸發程式。\n"
"可以用 dselect 或 dpkg --configure --pending（或 dpkg --triggers-only）\n"
"來執行觸發程式：\n"

#: src/enquiry.c:130
msgid ""
"The following packages have been triggered, but the trigger processing\n"
"has not yet been done.  Trigger processing can be requested using\n"
"dselect or dpkg --configure --pending (or dpkg --triggers-only):\n"
msgstr ""
"以下套件的觸發程式已觸發，但觸發程式尚未執行。\n"
"可以用 dselect 或 dpkg --configure --pending（或 dpkg --triggers-only）\n"
"來執行觸發程式：\n"

#: src/enquiry.c:137
msgid ""
"The following packages are missing the list control file in the\n"
"database, they need to be reinstalled:\n"
msgstr ""
"以下套件在資料庫中缺清單控制檔，\n"
"需重新安裝：\n"

#: src/enquiry.c:143
msgid ""
"The following packages are missing the md5sums control file in the\n"
"database, they need to be reinstalled:\n"
msgstr ""
"以下套件在資料庫中缺 md5sums 控制檔，\n"
"需重新安裝：\n"

#: src/enquiry.c:148
msgid "The following packages do not have an architecture:\n"
msgstr "以下套件沒有硬體平台：\n"

#: src/enquiry.c:152
msgid "The following packages have an illegal architecture:\n"
msgstr "以下套件有不合法的異質硬體平台：\n"

#: src/enquiry.c:157
msgid ""
"The following packages have an unknown foreign architecture, which will\n"
"cause dependency issues on front-ends. This can be fixed by registering\n"
"the foreign architecture with dpkg --add-architecture:\n"
msgstr ""
"下列套件有未知的異質硬體平台，會在前端造成相依性問題。\n"
"只要以 dpkg --add-architecture 註冊異質硬體平台，即可解決：\n"

#: src/enquiry.c:186 src/enquiry.c:260 src/enquiry.c:345 src/enquiry.c:434
#: src/enquiry.c:534 src/enquiry.c:557 src/select.c:118 src/select.c:199
#: src/trigcmd.c:219 src/update.c:48 src/update.c:110 dpkg-split/queue.c:249
#, c-format
msgid "--%s takes no arguments"
msgstr "--%s 不需要參數"

#: src/enquiry.c:201
msgid ""
"Another process has locked the database for writing, and might currently be\n"
"modifying it, some of the following problems might just be due to that.\n"
msgstr ""
"另外一個程序寫入鎖定資料庫，可能正在異動資料。\n"
"接下來某些問題可能和此有關。\n"

#: src/enquiry.c:240
msgctxt "section"
msgid "<unknown>"
msgstr "<未知>"

#: src/enquiry.c:300
#, c-format
msgid " %d in %s: "
msgstr " %d 屬於 %s："

#: src/enquiry.c:319
#, c-format
msgid " %d package, from the following section:"
msgid_plural " %d packages, from the following sections:"
msgstr[0] " %d 個套件，屬於以下類別："

#: src/enquiry.c:358
#, c-format
msgid ""
"Version of dpkg with working %s support not yet configured.\n"
" Please use 'dpkg --configure dpkg', and then try again.\n"
msgstr ""
"支援 %s 的 dpkg 版本尚未設定。\n"
" 請執行 'dpkg --configure dpkg'，然後再試一次。\n"

#: src/enquiry.c:363
#, c-format
msgid "dpkg not recorded as installed, cannot check for %s support!\n"
msgstr "記錄中未安裝 dpkg，無法檢查是否支援 %s ！\n"

#: src/enquiry.c:374
msgid "Pre-Depends field"
msgstr "預先相依欄位"

#: src/enquiry.c:382
msgid "epoch"
msgstr "epoch 時間"

#: src/enquiry.c:390
msgid "long filenames"
msgstr "長檔名"

#: src/enquiry.c:399
msgid "multiple Conflicts and Replaces"
msgstr "很多衝突、取代"

#: src/enquiry.c:407
msgid "multi-arch"
msgstr "多硬體平台"

#: src/enquiry.c:507
#, c-format
msgid ""
"cannot see how to satisfy pre-dependency:\n"
" %s"
msgstr ""
"無法推測該如何滿足預先相依關係：\n"
" %s"

#: src/enquiry.c:508
#, c-format
msgid "cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)"
msgstr "無法滿足 %.250s 的預先相依關係（應 %.250s 之要求）"

#: src/enquiry.c:546 dpkg-deb/main.c:169 dpkg-deb/main.c:178
#, c-format
msgid "obsolete option '--%s'; please use '--%s' instead"
msgstr "已作廢選項 '--%s' ；請改用 '--%s'"

#: src/enquiry.c:615
msgid ""
"--compare-versions takes three arguments: <version> <relation> <version>"
msgstr "--compare-version 需有三個參數：<版本號> <比較關係> <版本號>"

#: src/enquiry.c:620
msgid "--compare-versions bad relation"
msgstr "--compare-versions 比較關係不適切"

#: src/enquiry.c:625 src/enquiry.c:627 src/enquiry.c:636 src/enquiry.c:638
#, c-format
msgid "version '%s' has bad syntax: %s"
msgstr "版本 '%s' 的語法不正確：%s"

#: src/errors.c:64
#, c-format
msgid "failed to allocate memory for new entry in list of failed packages: %s"
msgstr "新增項目到失敗套件清單時，無法配置記憶體：%s"

#: src/errors.c:75
msgid "too many errors, stopping"
msgstr "錯誤太多，停止執行"

#: src/errors.c:84
#, fuzzy, c-format
#| msgid ""
#| "error processing %s (--%s):\n"
#| " %s"
msgid ""
"error processing package %s (--%s):\n"
" %s"
msgstr ""
"處理 %s (--%s) 時發生錯誤：\n"
" %s"

#: src/errors.c:97
#, fuzzy, c-format
#| msgid ""
#| "error processing %s (--%s):\n"
#| " %s"
msgid ""
"error processing archive %s (--%s):\n"
" %s"
msgstr ""
"處理 %s (--%s) 時發生錯誤：\n"
" %s"

#: src/errors.c:109
msgid "Errors were encountered while processing:\n"
msgstr "處理時發生錯誤：\n"

#: src/errors.c:116
msgid "Processing was halted because there were too many errors.\n"
msgstr "錯誤太多，處理作業中斷。\n"

#: src/errors.c:127
#, c-format
msgid "package %s was on hold, processing it anyway as you requested"
msgstr "套件 %s 原本保留，應您的要求強制繼續處理"

#: src/errors.c:131
#, c-format
msgid ""
"Package %s is on hold, not touching it.  Use --force-hold to override.\n"
msgstr "套件 %s 目前保留，不會去變動。用 --force-hold 來忽略該設定。\n"

#: src/errors.c:141
msgid "overriding problem because --force enabled:"
msgstr "使用了 --force 選項，忽略問題："

#: src/filesdb.c:234
#, c-format
msgid "unable to open files list file for package `%.250s'"
msgstr "無法開啟套件 `%.250s' 的檔案清單"

#: src/filesdb.c:239
#, c-format
msgid ""
"files list file for package '%.250s' missing; assuming package has no files "
"currently installed"
msgstr "找不到套件 '%.250s' 的檔案清單，假設該套件目前安裝任何檔案"

#: src/filesdb.c:251
#, c-format
msgid "unable to stat files list file for package '%.250s'"
msgstr "無法取得套件 '%.250s' 檔案清單的檔案資訊"

#: src/filesdb.c:255
#, c-format
msgid "files list for package '%.250s' is not a regular file"
msgstr "套件 '%.250s' 的檔案清單，不是普通檔案"

#: src/filesdb.c:263
#, c-format
msgid "reading files list for package '%.250s'"
msgstr "讀取套件 '%.250s' 的檔案清單"

#: src/filesdb.c:273
#, c-format
msgid "files list file for package '%.250s' is missing final newline"
msgstr "套件 '%.250s' 的檔案清單，檔尾沒有換行"

#: src/filesdb.c:281
#, c-format
msgid "files list file for package `%.250s' contains empty filename"
msgstr "套件 `%.250s' 的檔案清單，內有空檔名"

#: src/filesdb.c:292
#, c-format
msgid "error closing files list file for package `%.250s'"
msgstr "關閉套件 `%.250s' 的檔案清單時，發生錯誤"

#: src/filesdb.c:404
msgid "(Reading database ... "
msgstr "（讀取資料庫 ... "

#: src/filesdb.c:425
#, c-format
msgid "%d file or directory currently installed.)\n"
msgid_plural "%d files and directories currently installed.)\n"
msgstr[0] "目前共安裝了 %d 個檔案和目錄。）\n"

#: src/filesdb-hash.c:95
#, fuzzy, c-format
#| msgid "files list file for package '%.250s' is missing final newline"
msgid "control file '%s' for package '%s' is missing final newline"
msgstr "套件 '%.250s' 的檔案清單，檔尾沒有換行"

#: src/filesdb-hash.c:104
#, fuzzy, c-format
#| msgid "control file '%s' does not exist"
msgid "control file '%s' missing value"
msgstr "查無控制檔 '%s'"

#: src/filesdb-hash.c:107
#, fuzzy, c-format
#| msgid "control file '%s' does not exist"
msgid "control file '%s' missing value separator"
msgstr "查無控制檔 '%s'"

#: src/filesdb-hash.c:120
#, fuzzy, c-format
#| msgid "files list file for package `%.250s' contains empty filename"
msgid "control file '%s' for package '%s' contains empty filename"
msgstr "套件 `%.250s' 的檔案清單，內有空檔名"

#: src/filesdb-hash.c:146
#, fuzzy, c-format
#| msgid "unable to open files list file for package `%.250s'"
msgid "cannot open '%s' control file for package '%s'"
msgstr "無法開啟套件 `%.250s' 的檔案清單"

#: src/filesdb-hash.c:151
#, fuzzy, c-format
#| msgid "unable to stat files list file for package '%.250s'"
msgid "cannot stat '%s' control file for package '%s'"
msgstr "無法取得套件 '%.250s' 檔案清單的檔案資訊"

#: src/filesdb-hash.c:155
#, fuzzy, c-format
#| msgid "files list for package '%.250s' is not a regular file"
msgid "'%s' file for package '%s' is not a regular file"
msgstr "套件 '%.250s' 的檔案清單，不是普通檔案"

#: src/filesdb-hash.c:165
#, fuzzy, c-format
#| msgid "cannot extract control file '%s' from '%s': %s"
msgid "cannot read '%s' control file for package '%s'"
msgstr "無法由 '%2$s' 讀取設定檔 '%1$s'：%3$s"

#: src/filesdb-hash.c:172
#, fuzzy, c-format
#| msgid "error closing files list file for package `%.250s'"
msgid "cannot close '%s' control file for package '%s'"
msgstr "關閉套件 `%.250s' 的檔案清單時，發生錯誤"

#: src/help.c:44
msgid "not installed"
msgstr "未安裝"

#: src/help.c:45
msgid "not installed but configs remain"
msgstr "未被安裝，但卻留有設定檔"

#: src/help.c:46
msgid "broken due to failed removal or installation"
msgstr "由於移除或安裝失敗而毀損了"

#: src/help.c:47
msgid "unpacked but not configured"
msgstr "已被解開，但尚未設定"

#: src/help.c:48
msgid "broken due to postinst failure"
msgstr "由於 postinst 出錯而毀損了"

#: src/help.c:49
msgid "awaiting trigger processing by another package"
msgstr "正要執行另一個套件的觸發程式"

#: src/help.c:50
msgid "triggered"
msgstr "已觸發"

#: src/help.c:51
msgid "installed"
msgstr "安裝完畢"

#: src/help.c:112
msgid "PATH is not set"
msgstr "沒有設定 PATH"

#: src/help.c:134
#, c-format
msgid "'%s' not found in PATH or not executable"
msgstr "在 PATH 中找不到或無法執行 '%s'"

#: src/help.c:143
#, c-format
msgid ""
"%d expected program not found in PATH or not executable\n"
"%s"
msgid_plural ""
"%d expected programs not found in PATH or not executable\n"
"%s"
msgstr[0] ""
"%d 所需的程式，在 PATH 中找不到或無法執行\n"
"%s"

#: src/help.c:146
msgid ""
"Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin"
msgstr "注意：root 的 PATH 通常都包括 /usr/local/sbin、/usr/sbin 和 /sbin"

#: src/help.c:386
#, c-format
msgid "unable to securely remove '%.255s'"
msgstr "無法安全刪除 '%.255s'"

#: src/help.c:391 dpkg-deb/info.c:65 dpkg-deb/info.c:67
msgid "rm command for cleanup"
msgstr "rm 指令刪除檔案"

#: src/infodb-access.c:53
#, c-format
msgid "unable to check existence of `%.250s'"
msgstr "無法判斷 `%.250s' 是否存在"

#: src/infodb-access.c:83 src/infodb-upgrade.c:93
msgid "cannot read info directory"
msgstr "無法讀取 info 目錄"

#: src/infodb-format.c:52 src/unpack.c:690
#, c-format
msgid "error trying to open %.250s"
msgstr "在試圖開啟 %.250s 時發生錯誤"

#: src/infodb-format.c:56
#, c-format
msgid "corrupt info database format file '%s'"
msgstr "資訊資料庫格式檔 '%s' 損毀"

#: src/infodb-format.c:88
#, c-format
msgid "info database format (%d) is bogus or too new; try getting a newer dpkg"
msgstr ""

#: src/infodb-upgrade.c:123
#, fuzzy, c-format
#| msgid "Info file %s/%s not associated to any package"
msgid "info file %s/%s not associated to any package"
msgstr "資訊檔 %s/%s 不屬於任何套件"

#: src/infodb-upgrade.c:183
#, c-format
msgid "error while writing '%s'"
msgstr "'%s' 寫入錯誤"

#: src/main.c:61
#, c-format
msgid "Debian `%s' package management program version %s.\n"
msgstr "Debian `%s' 套件管理程式版本%s。\n"

#: src/main.c:86
#, fuzzy, c-format
#| msgid ""
#| "Commands:\n"
#| "  -i|--install       <.deb file name> ... | -R|--recursive "
#| "<directory> ...\n"
#| "  --unpack           <.deb file name> ... | -R|--recursive "
#| "<directory> ...\n"
#| "  -A|--record-avail  <.deb file name> ... | -R|--recursive "
#| "<directory> ...\n"
#| "  --configure        <package> ... | -a|--pending\n"
#| "  --triggers-only    <package> ... | -a|--pending\n"
#| "  -r|--remove        <package> ... | -a|--pending\n"
#| "  -P|--purge         <package> ... | -a|--pending\n"
#| "  --get-selections [<pattern> ...] Get list of selections to stdout.\n"
#| "  --set-selections                 Set package selections from stdin.\n"
#| "  --clear-selections               Deselect every non-essential package.\n"
#| "  --update-avail <Packages-file>   Replace available packages info.\n"
#| "  --merge-avail <Packages-file>    Merge with info from file.\n"
#| "  --clear-avail                    Erase existing available info.\n"
#| "  --forget-old-unavail             Forget uninstalled unavailable pkgs.\n"
#| "  -s|--status <package> ...        Display package status details.\n"
#| "  -p|--print-avail <package> ...   Display available version details.\n"
#| "  -L|--listfiles <package> ...     List files `owned' by package(s).\n"
#| "  -l|--list [<pattern> ...]        List packages concisely.\n"
#| "  -S|--search <pattern> ...        Find package(s) owning file(s).\n"
#| "  -C|--audit                       Check for broken package(s).\n"
#| "  --add-architecture <arch>        Add <arch> to the list of "
#| "architectures.\n"
#| "  --remove-architecture <arch>     Remove <arch> from the list of "
#| "architectures.\n"
#| "  --print-architecture             Print dpkg architecture.\n"
#| "  --print-foreign-architectures    Print allowed foreign architectures.\n"
#| "  --compare-versions <a> <op> <b>  Compare version numbers - see below.\n"
#| "  --force-help                     Show help on forcing.\n"
#| "  -Dh|--debug=help                 Show help on debugging.\n"
#| "\n"
msgid ""
"Commands:\n"
"  -i|--install       <.deb file name> ... | -R|--recursive <directory> ...\n"
"  --unpack           <.deb file name> ... | -R|--recursive <directory> ...\n"
"  -A|--record-avail  <.deb file name> ... | -R|--recursive <directory> ...\n"
"  --configure        <package> ... | -a|--pending\n"
"  --triggers-only    <package> ... | -a|--pending\n"
"  -r|--remove        <package> ... | -a|--pending\n"
"  -P|--purge         <package> ... | -a|--pending\n"
"  -V|--verify <package> ...        Verify the integrity of package(s).\n"
"  --get-selections [<pattern> ...] Get list of selections to stdout.\n"
"  --set-selections                 Set package selections from stdin.\n"
"  --clear-selections               Deselect every non-essential package.\n"
"  --update-avail <Packages-file>   Replace available packages info.\n"
"  --merge-avail <Packages-file>    Merge with info from file.\n"
"  --clear-avail                    Erase existing available info.\n"
"  --forget-old-unavail             Forget uninstalled unavailable pkgs.\n"
"  -s|--status <package> ...        Display package status details.\n"
"  -p|--print-avail <package> ...   Display available version details.\n"
"  -L|--listfiles <package> ...     List files `owned' by package(s).\n"
"  -l|--list [<pattern> ...]        List packages concisely.\n"
"  -S|--search <pattern> ...        Find package(s) owning file(s).\n"
"  -C|--audit                       Check for broken package(s).\n"
"  --add-architecture <arch>        Add <arch> to the list of architectures.\n"
"  --remove-architecture <arch>     Remove <arch> from the list of "
"architectures.\n"
"  --print-architecture             Print dpkg architecture.\n"
"  --print-foreign-architectures    Print allowed foreign architectures.\n"
"  --compare-versions <a> <op> <b>  Compare version numbers - see below.\n"
"  --force-help                     Show help on forcing.\n"
"  -Dh|--debug=help                 Show help on debugging.\n"
"\n"
msgstr ""
"指令：\n"
"  -i|--install       <.deb 檔> ... | -R|--recursive <目錄> ...\n"
"  --unpack           <.deb 檔> ... | -R|--recursive <目錄> ...\n"
"  -A|--record-avail  <.deb 檔> ... | -R|--recursive <目錄> ...\n"
"  --configure        <套件> ...    | -a|--pending\n"
"  --triggers-only    <套件> ...    | -a|--pending\n"
"  -r|--remove        <套件> ...    | -a|--pending\n"
"  -P|--purge         <套件> ...    | -a|--pending\n"
"  --get-selections [<表達式> ...]  將選擇清單，列印到標準輸出。\n"
"  --set-selections                 從標準輸入，取得套件選擇清單。\n"
"  --clear-selections               取消所有的非核心套件。\n"
"  --update-avail <Packages 檔>     取代可用套件資訊。\n"
"  --merge-avail <Packages 檔>      由檔案合併可用套件資訊。\n"
"  --clear-avail                    清除可用套件資訊。\n"
"  --forget-old-unavail             清除已移除且無法再安裝的套件。\n"
"  -s|--status <套件> ...           顯示套件詳情。\n"
"  -p|--print-avail <套件> ...      顯示可用版本詳情。\n"
"  -L|--listfiles <套件> ...        列出 `屬於' 套件的檔案。\n"
"  -l|--list [<表達式> ...]         簡要列出套件。\n"
"  -S|--search <表達式> ...         搜尋擁有該檔案的套件。\n"
"  -C|--audit                       檢查有沒有損毀的套件。\n"
"  --add-architecture <硬體平台>    把 <硬體平台> 加到硬體平台清單中。\n"
"  --remove-architecture <硬體平台> 由硬體平台清單移除 <硬體平台>。\n"
"  --print-architecture             顯示 dpkg 的硬體平台。\n"
"  --print-foreign-architectures    顯示可用的異質硬體平台。\n"
"  --compare-versions <a> <op> <b>  比較版本 - 請參閱下文。\n"
"  --force-help                     顯示強制選項的說明。\n"
"  -Dh|--debug=help                 顯示偵錯模式的說明。\n"
"\n"

#: src/main.c:118 src/querycmd.c:809 src/trigcmd.c:76 dpkg-deb/main.c:89
#: dpkg-split/main.c:78
#, c-format
msgid ""
"  -?, --help                       Show this help message.\n"
"      --version                    Show the version.\n"
"\n"
msgstr ""
"  -?, --help                       顯示這個說明訊息。\n"
"      --version                    顯示版本資訊。\n"
"\n"

#: src/main.c:123
#, c-format
msgid ""
"Use dpkg -b|--build|-c|--contents|-e|--control|-I|--info|-f|--field|\n"
" -x|--extract|-X|--vextract|--fsys-tarfile  on archives (type %s --help).\n"
"\n"
msgstr ""
"使用 dpkg -b|--build|-c|--contents|-e|--control|-I|--info|-f|--field|\n"
" -x|--extract|-X|--vextract|--fsys-tarfile 於套件檔上（鍵入 %s --help）。\n"
"\n"

#: src/main.c:128
#, c-format
msgid ""
"For internal use: dpkg --assert-support-predepends | --predep-package |\n"
"  --assert-working-epoch | --assert-long-filenames | --assert-multi-conrep "
"|\n"
"  --assert-multi-arch.\n"
"\n"
msgstr ""
"內部使用：dpkg --assert-support-predepends | --predep-package |\n"
"  --assert-working-epoch | --assert-long-filenames | --assert-multi-conrep "
"|\n"
"  --assert-multi-arch。\n"
"\n"

#: src/main.c:134
#, fuzzy, c-format
#| msgid ""
#| "Options:\n"
#| "  --admindir=<directory>     Use <directory> instead of %s.\n"
#| "  --root=<directory>         Install on a different root directory.\n"
#| "  --instdir=<directory>      Change installation dir without changing "
#| "admin dir.\n"
#| "  --path-exclude=<pattern>   Do not install paths which match a shell "
#| "pattern.\n"
#| "  --path-include=<pattern>   Re-include a pattern after a previous "
#| "exclusion.\n"
#| "  -O|--selected-only         Skip packages not selected for install/"
#| "upgrade.\n"
#| "  -E|--skip-same-version     Skip packages whose same version is "
#| "installed.\n"
#| "  -G|--refuse-downgrade      Skip packages with earlier version than "
#| "installed.\n"
#| "  -B|--auto-deconfigure      Install even if it would break some other "
#| "package.\n"
#| "  --[no-]triggers            Skip or force consequential trigger "
#| "processing.\n"
#| "  --no-debsig                Do not try to verify package signatures.\n"
#| "  --no-act|--dry-run|--simulate\n"
#| "                             Just say what we would do - don't do it.\n"
#| "  -D|--debug=<octal>         Enable debugging (see -Dhelp or --"
#| "debug=help).\n"
#| "  --status-fd <n>            Send status change updates to file "
#| "descriptor <n>.\n"
#| "  --status-logger=<command>  Send status change updates to <command>'s "
#| "stdin.\n"
#| "  --log=<filename>           Log status changes and actions to "
#| "<filename>.\n"
#| "  --ignore-depends=<package>,...\n"
#| "                             Ignore dependencies involving <package>.\n"
#| "  --force-...                Override problems (see --force-help).\n"
#| "  --no-force-...|--refuse-...\n"
#| "                             Stop when problems encountered.\n"
#| "  --abort-after <n>          Abort after encountering <n> errors.\n"
#| "\n"
msgid ""
"Options:\n"
"  --admindir=<directory>     Use <directory> instead of %s.\n"
"  --root=<directory>         Install on a different root directory.\n"
"  --instdir=<directory>      Change installation dir without changing admin "
"dir.\n"
"  --path-exclude=<pattern>   Do not install paths which match a shell "
"pattern.\n"
"  --path-include=<pattern>   Re-include a pattern after a previous "
"exclusion.\n"
"  -O|--selected-only         Skip packages not selected for install/"
"upgrade.\n"
"  -E|--skip-same-version     Skip packages whose same version is installed.\n"
"  -G|--refuse-downgrade      Skip packages with earlier version than "
"installed.\n"
"  -B|--auto-deconfigure      Install even if it would break some other "
"package.\n"
"  --[no-]triggers            Skip or force consequential trigger "
"processing.\n"
"  --verify-format=<format>   Verify output format (supported: 'rpm').\n"
"  --no-debsig                Do not try to verify package signatures.\n"
"  --no-act|--dry-run|--simulate\n"
"                             Just say what we would do - don't do it.\n"
"  -D|--debug=<octal>         Enable debugging (see -Dhelp or --debug=help).\n"
"  --status-fd <n>            Send status change updates to file descriptor "
"<n>.\n"
"  --status-logger=<command>  Send status change updates to <command>'s "
"stdin.\n"
"  --log=<filename>           Log status changes and actions to <filename>.\n"
"  --ignore-depends=<package>,...\n"
"                             Ignore dependencies involving <package>.\n"
"  --force-...                Override problems (see --force-help).\n"
"  --no-force-...|--refuse-...\n"
"                             Stop when problems encountered.\n"
"  --abort-after <n>          Abort after encountering <n> errors.\n"
"\n"
msgstr ""
"選項：\n"
"  --admindir=<目錄>          使用 <目錄> 代替 %s。\n"
"  --root=<目錄>              安裝在另一個 root 目錄。\n"
"  --instdir=<目錄>           變更安裝路徑，不變更 admin dir。\n"
"  --path-exclude=<表達式>    不安裝符合 shell 表達式的檔案。\n"
"  --path-include=<表達式>    前項選項排除後，再加上符合表達式的檔案。\n"
"  -O|--selected-only         略過未選擇為要安裝／升級的套件。\n"
"  -E|--skip-same-version     略過相同版本已安裝的套件。\n"
"  -G|--refuse-downgrade      略過比已安裝版本舊的套件。\n"
"  -B|--auto-deconfigure      即使會損毀其它套件也要安裝。\n"
"  --[no-]triggers            略過或強制接下來的觸發程式。\n"
"  --no-debsig                不試著去驗証套件簽章。\n"
"  --no-act|--dry-run|--simulate\n"
"                             只顯示接下來的動作 - 不實際執行。\n"
"  -D|--debug=<八進制數字>    啟用除錯（參閱 -Dhelp 或 --debug=help）。\n"
"  --status-fd <n>            傳送狀態異動至檔案敘述 <n>。\n"
"  --status-logger=<指令>     傳送狀態異動 <指令> 的標準輸入。\n"
"  --log=<檔名>               記錄狀態異動及動作至 <檔名>。\n"
"  --ignore-depends=<套件>,...\n"
"                             忽略 <套件> 的相依關係。\n"
"  --force-...                無視問題（參閱 --force-help）。\n"
"  --no-force-...|--refuse-...\n"
"                             當發生問題時中止。\n"
"  --abort-after <n>          碰到 <n> 個錯誤後中止。\n"
"\n"

#: src/main.c:162
#, c-format
msgid ""
"Comparison operators for --compare-versions are:\n"
"  lt le eq ne ge gt       (treat empty version as earlier than any "
"version);\n"
"  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);\n"
"  < << <= = >= >> >       (only for compatibility with control file "
"syntax).\n"
"\n"
msgstr ""
"--compare-versions 的比較運算子：\n"
"  lt le eq ne ge gt       （無版號時，視為最舊版）；\n"
"  lt-nl le-nl ge-nl gt-nl （無版號時，視為最新版）；\n"
"  < << <= = >= >> >       （相容於控制檔的語法專用）。\n"
"\n"

#: src/main.c:169
#, fuzzy, c-format
#| msgid "Use `dselect' or `aptitude' for user-friendly package management.\n"
msgid "Use 'apt' or 'aptitude' for user-friendly package management.\n"
msgstr "使用 `dselect' 或 `aptitude' 等介面親和的套件管理程式。\n"

#: src/main.c:177
#, fuzzy
#| msgid ""
#| "Type dpkg --help for help about installing and deinstalling packages "
#| "[*];\n"
#| "Use `dselect' or `aptitude' for user-friendly package management;\n"
#| "Type dpkg -Dhelp for a list of dpkg debug flag values;\n"
#| "Type dpkg --force-help for a list of forcing options;\n"
#| "Type dpkg-deb --help for help about manipulating *.deb files;\n"
#| "\n"
#| "Options marked [*] produce a lot of output - pipe it through `less' or "
#| "`more' !"
msgid ""
"Type dpkg --help for help about installing and deinstalling packages [*];\n"
"Use 'apt' or 'aptitude' for user-friendly package management;\n"
"Type dpkg -Dhelp for a list of dpkg debug flag values;\n"
"Type dpkg --force-help for a list of forcing options;\n"
"Type dpkg-deb --help for help about manipulating *.deb files;\n"
"\n"
"Options marked [*] produce a lot of output - pipe it through 'less' or "
"'more' !"
msgstr ""
"輸入 dpkg --help，以參閱安裝和移除套件的說明 [*]。\n"
"使用 `dselect' 或 `aptitude'，用友善的界面管理套件。\n"
"輸入 dpkg -Dhelp，以取得 dpkg 除錯旗標值的清單。\n"
"輸入 dpkg --force-help，以取得強制選項的清單。\n"
"輸入 dpkg-deb --help，以取得操作 *.deb 檔的說明。\n"
"\n"
"標示有 [*] 的選項會輸出大量文字 - 可轉輸出至 `less' 或 `more' ！"

#: src/main.c:226
msgid "Set all force options"
msgstr "設定所有強制選項"

#: src/main.c:228
msgid "Replace a package with a lower version"
msgstr "把套件換成舊版"

#: src/main.c:230
msgid "Configure any package which may help this one"
msgstr "設定和這個套件有關的所有套件"

#: src/main.c:232
msgid "Process incidental packages even when on hold"
msgstr "不管保留狀態，處理所有附帶的套件"

#: src/main.c:234
msgid "Try to (de)install things even when not root"
msgstr "即使不是 root，也試著安裝（解安裝）"

#: src/main.c:236
msgid "PATH is missing important programs, problems likely"
msgstr "PATH 中缺少重要程式，可能是問題"

#: src/main.c:238
msgid "Install a package even if it fails authenticity check"
msgstr "就算套件驗證失敗，也還是安裝"

#: src/main.c:240
msgid "Process even packages with wrong versions"
msgstr "即使套件版本錯誤，也繼續進行"

#: src/main.c:242
msgid "Overwrite a file from one package with another"
msgstr "用一個套件的檔案，取代另外一個套件的檔案"

#: src/main.c:244
msgid "Overwrite a diverted file with an undiverted version"
msgstr "用未移轉的檔案，取代移轉的檔案"

#: src/main.c:246
msgid "Overwrite one package's directory with another's file"
msgstr "用一個套件的檔案，取代另一個套件的目錄"

#: src/main.c:248
msgid "Do not perform safe I/O operations when unpacking"
msgstr "解壓縮時，不執行安全輸出入操作"

#: src/main.c:250
msgid "Always use the new config files, don't prompt"
msgstr "永遠採用新的設定檔，不另行詢問"

#: src/main.c:252
msgid "Always use the old config files, don't prompt"
msgstr "永遠採用舊的設定檔，不另行詢問"

#: src/main.c:254
msgid ""
"Use the default option for new config files if one\n"
"is available, don't prompt. If no default can be found,\n"
"you will be prompted unless one of the confold or\n"
"confnew options is also given"
msgstr ""
"若有新設定檔，則用預設選項，不再詢問。若沒有預設選項，\n"
"除非有設定 confold 或 confnew 選項，否則會詢問你"

#: src/main.c:259
msgid "Always install missing config files"
msgstr "永遠安裝缺的設定檔"

#: src/main.c:261
msgid "Offer to replace config files with no new versions"
msgstr "即使沒有新設定檔，也詢要問不要取代舊設定檔"

#: src/main.c:263
msgid "Process even packages with wrong or no architecture"
msgstr "即使套件沒有設硬體平台，或硬體平台有誤，也繼續進行"

#: src/main.c:265
msgid "Install even if it would break another package"
msgstr "即使會破壞其它套件，也要安裝"

#: src/main.c:267
msgid "Allow installation of conflicting packages"
msgstr "允許安裝相衝的討件"

#: src/main.c:269
msgid "Turn all dependency problems into warnings"
msgstr "把所有相依問題當作警告"

#: src/main.c:271
msgid "Turn dependency version problems into warnings"
msgstr "把所有相依版本問題當作警告"

#: src/main.c:273
msgid "Remove packages which require installation"
msgstr "移除需要安裝的套件"

#: src/main.c:275
msgid "Remove an essential package"
msgstr "移除核心套件"

#: src/main.c:287
msgid "Generally helpful progress information"
msgstr "普通的輔助進度資料"

#: src/main.c:288
msgid "Invocation and status of maintainer scripts"
msgstr "維護者程式的執行及狀態"

#: src/main.c:289
msgid "Output for each file processed"
msgstr "顯示每個處理的檔案"

#: src/main.c:290
msgid "Lots of output for each file processed"
msgstr "詳細顯示每個處理的檔案"

#: src/main.c:291
msgid "Output for each configuration file"
msgstr "顯示每個設定檔"

#: src/main.c:292
msgid "Lots of output for each configuration file"
msgstr "詳細顯示每個設定檔"

#: src/main.c:293
msgid "Dependencies and conflicts"
msgstr "相依和衝突關係"

#: src/main.c:294
msgid "Lots of dependencies/conflicts output"
msgstr "詳細顯示相依和衝突關係"

#: src/main.c:295
msgid "Trigger activation and processing"
msgstr "觸發程式的觸發和執行"

#: src/main.c:296
msgid "Lots of output regarding triggers"
msgstr "詳細顯示觸發程式相關訊息"

#: src/main.c:297
msgid "Silly amounts of output regarding triggers"
msgstr "超詳細顯示觸發程式相關訊息"

#: src/main.c:298
msgid "Lots of drivel about eg the dpkg/info directory"
msgstr "大量的瑣碎細節，如 dpkg/info 目錄"

#: src/main.c:299
msgid "Insane amounts of drivel"
msgstr "數量極大的超詳盡資訊"

#: src/main.c:312
#, c-format
msgid ""
"%s debugging option, --debug=<octal> or -D<octal>:\n"
"\n"
" Number  Ref. in source   Description\n"
msgstr ""
"%s 偵錯選項，--debug=<八進位數> 或 -D<八進位數>：\n"
"\n"
" 編號    原始碼參照       說明\n"

#: src/main.c:319
#, c-format
msgid ""
"\n"
"Debugging options can be mixed using bitwise-or.\n"
"Note that the meanings and values are subject to change.\n"
msgstr ""
"\n"
"偵錯選項可以用位元 or 組合。\n"
"請注意：其值和意義會隨時異動。\n"

#: src/main.c:329
#, c-format
msgid "--%s requires a positive octal argument"
msgstr "--%s 需要正的八進位參數"

#: src/main.c:344
#, fuzzy, c-format
#| msgid "unknown option '%s'"
msgid "unknown verify output format '%s'"
msgstr "選項不明 '%s'"

#: src/main.c:368
#, c-format
msgid "null package name in --%s comma-separated list '%.250s'"
msgstr "在 --%s 的逗號分隔清單 '%.250s' 中，有空的套件名稱"

#: src/main.c:378 src/packages.c:114 src/querycmd.c:440 src/querycmd.c:685
#: src/querycmd.c:717 src/querycmd.c:754
#, c-format
msgid "--%s needs a valid package name but '%.250s' is not: %s"
msgstr "--%s 需要有效的套件名稱，不是 '%.250s'：%s"

#: src/main.c:457
#, c-format
msgid "error executing hook '%s', exit code %d"
msgstr "無法執行觸發指令 '%s'，結束狀態碼 %d"

#: src/main.c:496
msgid "status logger"
msgstr "狀態記錄器"

#: src/main.c:508 src/main.c:538
#, c-format
msgid "--%s takes one argument"
msgstr "--%s 需要一個參數"

#: src/main.c:518
#, c-format
msgid "architecture '%s' is illegal: %s"
msgstr "不合法的硬體平台 '%s'：%s"

#: src/main.c:521
#, c-format
msgid "architecture '%s' is reserved and cannot be added"
msgstr "硬體平台 '%s' 已預留，無法新增"

#: src/main.c:544
#, c-format
msgid "cannot remove non-foreign architecture '%s'"
msgstr "無法移除非異質硬體平台 '%s'"

#: src/main.c:555
#, c-format
msgid "removing architecture '%s' currently in use by database"
msgstr "移除資料庫正在使用的 '%s' 硬體平台"

#: src/main.c:558
#, c-format
msgid "cannot remove architecture '%s' currently in use by the database"
msgstr "無法移除資料庫正在使用的 '%s' 硬體平台"

#: src/main.c:603
#, c-format
msgid ""
"%s forcing options - control behaviour when problems found:\n"
"  warn but continue:  --force-<thing>,<thing>,...\n"
"  stop with error:    --refuse-<thing>,<thing>,... | --no-force-<thing>,...\n"
" Forcing things:\n"
msgstr ""
"%s 強制選項 - 發生問題時，程式的行為控制：\n"
"  警告後繼續：  --force-<項目>,<項目>,...\n"
"  錯誤終止：    --refuse-<項目>,<項目>,... | --no-force-<項目>,...\n"
" 強制項目：\n"

#: src/main.c:612
#, c-format
msgid ""
"\n"
"WARNING - use of options marked [!] can seriously damage your installation.\n"
"Forcing options marked [*] are enabled by default.\n"
msgstr ""
"\n"
"警告 - 使用標記 [!] 的選項，會嚴重破壞系統。\n"
"預設啟用標記 [*] 的強制選項。\n"

#: src/main.c:627
#, c-format
msgid "unknown force/refuse option `%.*s'"
msgstr "未知的 force/refuse 選項 `%.*s'"

#: src/main.c:636
#, c-format
msgid "obsolete force/refuse option '%s'\n"
msgstr "已作廢的 force/refuse 選項 '%s'\n"

#: src/main.c:772 dpkg-deb/info.c:333
#, c-format
msgid "--%s takes exactly one argument"
msgstr "--%s 需要剛好一個參數"

#: src/main.c:777
#, c-format
msgid "couldn't open `%i' for stream"
msgstr "無法開啟 `%i' 讀取資料串流"

#: src/main.c:802
#, c-format
msgid "unexpected eof before end of line %d"
msgstr "在第 %d 行結束之前有預期之外的 eof"

#: src/main.c:845 src/main.c:863 src/querycmd.c:871 src/statcmd.c:356
#: dpkg-deb/main.c:253 dpkg-split/main.c:166
msgid "need an action option"
msgstr "欠缺操作選項"

#: src/main.c:869 src/script.c:108
msgid "unable to setenv for subprocesses"
msgstr "無法為子程序設定環境變數"

#: src/packages.c:122
msgid ""
"you must specify packages by their own names, not by quoting the names of "
"the files they come in"
msgstr "您必須使用套件本身的名字，而不是直接引用完整的檔名"

#: src/packages.c:144
#, c-format
msgid "--%s --pending does not take any non-option arguments"
msgstr "--%s --pending 不需任何不是選項的參數"

#: src/packages.c:149 src/querycmd.c:428 src/querycmd.c:671
#, c-format
msgid "--%s needs at least one package name argument"
msgstr "--%s 需要至少一個套件名稱作為參數"

#: src/packages.c:190
#, c-format
msgid "Package %s listed more than once, only processing once.\n"
msgstr "套件 %s 被列出多次，但只會被處理一次。\n"

#: src/packages.c:194
#, c-format
msgid ""
"More than one copy of package %s has been unpacked\n"
" in this run !  Only configuring it once.\n"
msgstr ""
"在此次執行中，同時解開了套件 %s 的多個副本！\n"
" 但只會設定一次。\n"

#: src/packages.c:244
#, c-format
msgid ""
"package %.250s is not ready for trigger processing\n"
" (current status `%.250s' with no pending triggers)"
msgstr ""
"套件 %.250s 還無法處理觸發程式\n"
"（目前的狀態為 `%.250s'，沒有待處理的觸發程式）"

#: src/packages.c:346
#, c-format
msgid "  Package %s which provides %s is to be removed.\n"
msgstr "  提供了 %2$s 的套件 %1$s 即將被移除。\n"

#: src/packages.c:349
#, c-format
msgid "  Package %s is to be removed.\n"
msgstr "  即將移除套件 %s。\n"

#: src/packages.c:364
#, c-format
msgid "  Version of %s on system is %s.\n"
msgstr "  %s 在系統上的版本為 %s。\n"

#: src/packages.c:386
#, c-format
msgid "  Package %s which provides %s awaits trigger processing.\n"
msgstr "  提供了 %2$s 的套件 %1$s 正要執行觸發程式。\n"

#: src/packages.c:390
#, c-format
msgid "  Package %s awaits trigger processing.\n"
msgstr "  套件 %s 正要執行觸發程式。\n"

#: src/packages.c:419
#, c-format
msgid "also configuring '%s' (required by '%s')"
msgstr "同時設定 '%s'（應 '%s' 要求）"

#: src/packages.c:428
#, c-format
msgid "  Package %s which provides %s is not configured yet.\n"
msgstr "  提供了 %2$s 的套件 %1$s 尚未設定。\n"

#: src/packages.c:431
#, c-format
msgid "  Package %s is not configured yet.\n"
msgstr "  %s 套件尚未設定。\n"

#: src/packages.c:442
#, c-format
msgid "  Package %s which provides %s is not installed.\n"
msgstr "  未曾安裝提供了 %2$s 的套件 %1$s。\n"

#: src/packages.c:445
#, c-format
msgid "  Package %s is not installed.\n"
msgstr "  套件 %s 未安裝。\n"

#: src/packages.c:485
#, c-format
msgid " %s (%s) breaks %s and is %s.\n"
msgstr " %s（%s）損毀了 %s，且已 %s。\n"

#: src/packages.c:492
#, c-format
msgid "  %s (%s) provides %s.\n"
msgstr "  %s（%s）提供了 %s。\n"

#: src/packages.c:497
#, c-format
msgid "  Version of %s to be configured is %s.\n"
msgstr "  %s 要設定的版本是 %s。\n"

#: src/packages.c:640
msgid " depends on "
msgstr " 相依於 "

#: src/packages.c:646
msgid "; however:\n"
msgstr "﹔然而：\n"

#. TRANSLATORS: This is the header that appears on 'dpkg-query -l'. The
#. * string should remain under 80 characters. The uppercase letters in
#. * the state values denote the abbreviated letter that will appear on
#. * the first three columns, which should ideally match the English one
#. * (e.g. Remove → supRimeix), see dpkg-query(1) for further details. The
#. * translated message can use additional lines if needed.
#: src/querycmd.c:188
msgid ""
"Desired=Unknown/Install/Remove/Purge/Hold\n"
"| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-"
"pend\n"
"|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)\n"
msgstr ""
"要求=U:未知/I:安裝/R:刪除/P:清除/H:保留\n"
"| 狀態=N:未安裝/I:已安裝/C:設定檔/U:已解開/F:半設定/H:半安裝/W:待觸發/T:未觸"
"發\n"
"|/ 錯誤?=(無)/R:須重新安裝（狀態，錯誤：大寫=有問題）\n"

#: src/querycmd.c:192
msgid "Name"
msgstr "名稱"

#: src/querycmd.c:192
msgid "Version"
msgstr "版本"

#: src/querycmd.c:193
msgid "Architecture"
msgstr "硬體平台"

#: src/querycmd.c:193
msgid "Description"
msgstr "簡介"

#: src/querycmd.c:296 src/querycmd.c:583 src/select.c:93
#, c-format
msgid "no packages found matching %s"
msgstr "找不到符合 %s 的套件"

#: src/querycmd.c:327
#, c-format
msgid "diversion by %s from: %s\n"
msgstr "%s 移轉自：%s\n"

#: src/querycmd.c:329
#, c-format
msgid "diversion by %s to: %s\n"
msgstr "%s 移轉至：%s\n"

#: src/querycmd.c:332
#, c-format
msgid "local diversion from: %s\n"
msgstr "自行移轉自：%s\n"

#: src/querycmd.c:333
#, c-format
msgid "local diversion to: %s\n"
msgstr "自行移轉至：%s\n"

#: src/querycmd.c:363
msgid "--search needs at least one file name pattern argument"
msgstr "--search 需要至少一個檔名表達式作為參數"

#: src/querycmd.c:404
#, c-format
msgid "no path found matching pattern %s"
msgstr "找不到符合 %s 的路徑"

#: src/querycmd.c:451
#, c-format
msgid "package '%s' is not installed and no information is available"
msgstr "套件 '%s' 未安裝，無法取得其資訊"

#: src/querycmd.c:460
#, c-format
msgid "package '%s' is not available"
msgstr "無法取得套件 '%s'"

#: src/querycmd.c:470 src/querycmd.c:689 src/querycmd.c:721 src/querycmd.c:758
#, c-format
msgid "package '%s' is not installed"
msgstr "套件 '%s' 未安裝"

#: src/querycmd.c:479
#, c-format
msgid "Package `%s' does not contain any files (!)\n"
msgstr "套件 `%s' 未含有任何檔案 (!)\n"

#: src/querycmd.c:487
#, c-format
msgid "locally diverted to: %s\n"
msgstr "自行移轉至：%s\n"

#: src/querycmd.c:490
#, c-format
msgid "package diverts others to: %s\n"
msgstr "套件將其它的移轉至：%s\n"

#: src/querycmd.c:493
#, c-format
msgid "diverted by %s to: %s\n"
msgstr "被 %s 移轉到：%s\n"

#: src/querycmd.c:514
msgid ""
"Use dpkg --info (= dpkg-deb --info) to examine archive files,\n"
"and dpkg --contents (= dpkg-deb --contents) to list their contents.\n"
msgstr ""
"使用 dpkg --info (= dpkg-deb --info) 來檢查壓縮檔，\n"
"以及 dpkg --contents (= dpkg-deb --contents) 來列出壓縮檔內容。\n"

#: src/querycmd.c:535 dpkg-deb/info.c:282
#, c-format
msgid "error in show format: %s"
msgstr "顯示格式錯誤：%s"

#: src/querycmd.c:625
#, c-format
msgid "control file contains %c"
msgstr "控制檔包含 %c"

#: src/querycmd.c:676 dpkg-deb/build.c:459
#, c-format
msgid "--%s takes at most two arguments"
msgstr "--%s 最多只有兩個參數"

#: src/querycmd.c:711
#, c-format
msgid "--%s takes one package name argument"
msgstr "--%s 需要一個套件名稱參數"

#: src/querycmd.c:741 src/querycmd.c:746
#, c-format
msgid "--%s takes exactly two arguments"
msgstr "--%s 需要兩個參數"

#: src/querycmd.c:763
#, c-format
msgid "control file '%s' does not exist"
msgstr "查無控制檔 '%s'"

#: src/querycmd.c:775
#, c-format
msgid "Debian %s package management program query tool version %s.\n"
msgstr "Debian %s 套件管理程式查詢工具版本 %s。\n"

#: src/querycmd.c:794
#, c-format
msgid ""
"Commands:\n"
"  -s|--status <package> ...        Display package status details.\n"
"  -p|--print-avail <package> ...   Display available version details.\n"
"  -L|--listfiles <package> ...     List files `owned' by package(s).\n"
"  -l|--list [<pattern> ...]        List packages concisely.\n"
"  -W|--show [<pattern> ...]        Show information on package(s).\n"
"  -S|--search <pattern> ...        Find package(s) owning file(s).\n"
"     --control-list <package>      Print the package control file list.\n"
"     --control-show <package> <file>\n"
"                                   Show the package control file.\n"
"  -c|--control-path <package> [<file>]\n"
"                                   Print path for package control file.\n"
"\n"
msgstr ""
"指令：\n"
"  -s|--status <套件> ...           顯示套件詳情。\n"
"  -p|--print-avail <套件> ...      顯示可用版本詳情。\n"
"  -L|--listfiles <套件> ...        列出 `屬於' 套件的檔案。\n"
"  -I|--list [<表達式> ...]         簡要列出套件。\n"
"  -W|--show <表達式> ...           顯示套件資訊。\n"
"  -S|--search <表達式> ...         搜尋擁有該檔案的套件。\n"
"     --control-list <套件>         列出套件控制檔。\n"
"     --control-show <套件> <檔案>\n"
"                                   顯示套件控制檔。\n"
"  -c|--control-path <package> [<file>]\n"
"                                   顯示套件控制檔的路徑。\n"
"\n"

#: src/querycmd.c:814
#, c-format
msgid ""
"Options:\n"
"  --admindir=<directory>           Use <directory> instead of %s.\n"
"  --load-avail                     Use available file on --show and --list.\n"
"  -f|--showformat=<format>         Use alternative format for --show.\n"
"\n"
msgstr ""
"選項：\n"
"  --admindir=<目錄>                使用 <目錄> 代替 %s。\n"
"  --load-avail                     --show 及 --list 時，用可用檔。\n"
"  -f|--showformat=<格式>           替 --show 指定其它的輸出格式。\n"
"\n"

#: src/querycmd.c:821 dpkg-deb/main.c:119
#, c-format
msgid ""
"Format syntax:\n"
"  A format is a string that will be output for each package. The format\n"
"  can include the standard escape sequences \\n (newline), \\r (carriage\n"
"  return) or \\\\ (plain backslash). Package information can be included\n"
"  by inserting variable references to package fields using the ${var[;"
"width]}\n"
"  syntax. Fields will be right-aligned unless the width is negative in "
"which\n"
"  case left alignment will be used.\n"
msgstr ""
"格式語法：\n"
"  『格式』是指輸出套件資訊時用的字串。可以加上標準跳脫字元如 \\n（換行）、\n"
"  \\r（歸位）或 \\\\（反斜線）。可在套件欄位中，使用 ${var[;width]} 語法，\n"
"  加入套件資訊。欄位向右對齊，若要向左對齊，寬度請設為負的。\n"

#: src/querycmd.c:835
msgid "Use --help for help about querying packages."
msgstr "請用 --help，參閱查詢套件的說明。"

#: src/remove.c:107
#, c-format
msgid "ignoring request to remove %.250s which isn't installed"
msgstr "忽略移除 %.250s 的要求，它並未安裝"

#: src/remove.c:115
#, c-format
msgid ""
"ignoring request to remove %.250s, only the config\n"
" files of which are on the system; use --purge to remove them too"
msgstr ""
"忽略移除 %.250s 的要求，它在系統中只剩設定檔。\n"
" 請用 --purge 一併刪除設定檔"

#: src/remove.c:124
#, fuzzy
#| msgid "This is an essential package - it should not be removed."
msgid "this is an essential package; it should not be removed"
msgstr "這是一個基本套件 - 不應當把它移除。"

#: src/remove.c:144
#, c-format
msgid ""
"dependency problems prevent removal of %s:\n"
"%s"
msgstr ""
"由於相依上的問題，不能移除 %s：\n"
"%s"

#: src/remove.c:146
msgid "dependency problems - not removing"
msgstr "相依問題 - 不會移除"

#: src/remove.c:149
#, c-format
msgid ""
"%s: dependency problems, but removing anyway as you requested:\n"
"%s"
msgstr ""
"%s：發生相依上的問題，但還是應您要求強制移除：\n"
"%s"

#: src/remove.c:157
#, fuzzy
#| msgid ""
#| "Package is in a very bad inconsistent state - you should\n"
#| " reinstall it before attempting a removal."
msgid ""
"package is in a very bad inconsistent state; you should\n"
" reinstall it before attempting a removal"
msgstr "套件狀態非常混亂 - 要移除前最好先重新安裝。"

#: src/remove.c:164
#, fuzzy, c-format
#| msgid "Would remove or purge %s ...\n"
msgid "Would remove or purge %s (%s) ...\n"
msgstr "將要移除或清除 %s ...\n"

#: src/remove.c:174
#, fuzzy, c-format
#| msgid "Removing %s ...\n"
msgid "Removing %s (%s) ...\n"
msgstr "移除 %s ...\n"

#: src/remove.c:215 src/unpack.c:212
#, c-format
msgid "unable to delete control info file `%.250s'"
msgstr "無法刪除控制資訊檔 `%.250s'"

#: src/remove.c:335 src/remove.c:426
#, c-format
msgid ""
"while removing %.250s, unable to remove directory '%.250s': %s - directory "
"may be a mount point?"
msgstr "移除 %.250s 時，無法刪除目錄 '%.250s'：%s - 它是掛載點嗎？"

#: src/remove.c:349
#, c-format
msgid "unable to securely remove '%.250s'"
msgstr "無法安全刪除 '%.255s'"

#: src/remove.c:421
#, c-format
msgid "while removing %.250s, directory '%.250s' not empty so not removed"
msgstr "移除 %.250s 時，目錄 '%.250s' 不是空的，不會刪除"

#: src/remove.c:443
#, c-format
msgid "cannot remove '%.250s'"
msgstr "無法刪除 '%.250s'"

#: src/remove.c:469
#, fuzzy, c-format
#| msgid "Purging configuration files for %s ...\n"
msgid "Purging configuration files for %s (%s) ...\n"
msgstr "清除 %s 的設定檔 ...\n"

#: src/remove.c:523
#, c-format
msgid "cannot remove old config file `%.250s' (= `%.250s')"
msgstr "無法刪除原有的設定檔 `%.250s' (= `%.250s' )"

#: src/remove.c:538
#, c-format
msgid "cannot read config file dir `%.250s' (from `%.250s')"
msgstr "無法讀取設定檔目錄 `%.250s'（從 `%.250s'）"

#: src/remove.c:575
#, c-format
msgid "cannot remove old backup config file `%.250s' (of `%.250s')"
msgstr "無法刪除原有的設定檔備份 `%.250s'（`%.250s' 的）"

#: src/remove.c:633
msgid "cannot remove old files list"
msgstr "無法刪除原有的檔案列表"

#: src/remove.c:639
msgid "can't remove old postrm script"
msgstr "無法刪除原有的 postrm script"

#: src/script.c:92
#, c-format
msgid "unable to set execute permissions on `%.250s'"
msgstr "無法設定 `%.250s' 的執行權限"

#: src/script.c:106
msgid "admindir must be inside instdir for dpkg to work properly"
msgstr "為使 dpkg 正常執行， admindir 須在 instdir 下"

#: src/script.c:111
#, c-format
msgid "failed to chroot to `%.250s'"
msgstr "無法 chroot 至 `%.250s'"

#: src/script.c:116 dpkg-deb/build.c:188 dpkg-deb/build.c:506
#: dpkg-deb/build.c:508 dpkg-deb/build.c:600
#, c-format
msgid "failed to chdir to `%.255s'"
msgstr "無法 chdir 到 `%.255s'"

#: src/script.c:218
msgid "unable to setenv for maintainer script"
msgstr "無法為維護者程式設定環境變數"

#: src/script.c:223
#, fuzzy
#| msgid "unable to setenv for maintainer script"
msgid "cannot set security execution context for maintainer script"
msgstr "無法為維護者程式設定環境變數"

#: src/script.c:247
#, c-format
msgid "installed %s script"
msgstr "已安裝的 %s script"

#: src/script.c:261 src/script.c:333 src/script.c:395
#, c-format
msgid "unable to stat %s `%.250s'"
msgstr "無法取得 %s `%.250s' 的檔案資訊"

#: src/script.c:317 src/script.c:382
#, c-format
msgid "new %s script"
msgstr "新的 %s script"

#: src/script.c:355
#, c-format
msgid "old %s script"
msgstr "原先的 %s script"

#: src/script.c:370
#, c-format
msgid "unable to stat %s '%.250s': %s"
msgstr "無法取得 %s '%.250s' 的檔案資訊：%s"

#: src/script.c:379
msgid "trying script from the new package instead ..."
msgstr "試著改用新套件的 script ..."

#: src/script.c:393
msgid "there is no script in the new version of the package - giving up"
msgstr "新版本的套件裡沒有 script - 放棄執行"

#: src/script.c:399
msgid "... it looks like that went OK"
msgstr "... 看來沒問題"

#: src/select.c:138
#, c-format
msgid "unexpected eof in package name at line %d"
msgstr "在第 %d 行的套件名稱中有預期之外的 eof"

#: src/select.c:139
#, c-format
msgid "unexpected end of line in package name at line %d"
msgstr "在第 %d 行的套件名稱中意外地發現此行結束"

#: src/select.c:145
#, c-format
msgid "unexpected eof after package name at line %d"
msgstr "在第 %d 行的套件名稱後有預期之外的 eof"

#: src/select.c:146
#, c-format
msgid "unexpected end of line after package name at line %d"
msgstr "在第 %d 行的套件名後意外地發現此行結束"

#: src/select.c:159
#, c-format
msgid "unexpected data after package and selection at line %d"
msgstr "在第 %d 行的套件及選擇項目之後有預期之外的資料"

#: src/select.c:163
#, c-format
msgid "illegal package name at line %d: %.250s"
msgstr "在第 %d 行有非法的套件名稱：%.250s"

#: src/select.c:168
#, c-format
msgid "package not in database at line %d: %.250s"
msgstr "在第 %d 行的套件不在資料庫中：%.250s"

#: src/select.c:174
#, c-format
msgid "unknown wanted status at line %d: %.250s"
msgstr "在第 %d 行所得到的狀態不明：%.250s"

#: src/select.c:180
msgid "read error on standard input"
msgstr "從標準輸入讀取資料時發生錯誤"

#: src/select.c:186
msgid ""
"found unknown packages; this might mean the available database\n"
"is outdated, and needs to be updated through a frontend method"
msgstr ""

#: src/statcmd.c:52
msgid "Use --help for help about overriding file stat information."
msgstr "請用 --help，參閱忽略檔案資訊的說明。"

#: src/statcmd.c:77
#, fuzzy, c-format
#| msgid ""
#| "Commands:\n"
#| "  --add <owner> <group> <mode> <file>\n"
#| "                           add a new entry into the database.\n"
#| "  --remove <file>          remove file from the database.\n"
#| "  --list [<glob-pattern>]  list current overrides in the database.\n"
#| "\n"
msgid ""
"Commands:\n"
"  --add <owner> <group> <mode> <path>\n"
"                           add a new <path> entry into the database.\n"
"  --remove <path>          remove <path> from the database.\n"
"  --list [<glob-pattern>]  list current overrides in the database.\n"
"\n"
msgstr ""
"命令：\n"
"  --add <擁有者> <群組> <模式> <檔案>\n"
"                           新增一個項目至資料庫。\n"
"  --remove <檔案>          由資料庫中移除檔案。\n"
"  --list [<比對表達式>]    列出目前資料庫中的優先選項。\n"
"\n"

#: src/statcmd.c:85
#, fuzzy, c-format
#| msgid ""
#| "Options:\n"
#| "  --admindir <directory>   set the directory with the statoverride file.\n"
#| "  --update                 immediately update file permissions.\n"
#| "  --force                  force an action even if a sanity check fails.\n"
#| "  --quiet                  quiet operation, minimal output.\n"
#| "  --help                   show this help message.\n"
#| "  --version                show the version.\n"
#| "\n"
msgid ""
"Options:\n"
"  --admindir <directory>   set the directory with the statoverride file.\n"
"  --update                 immediately update <path> permissions.\n"
"  --force                  force an action even if a sanity check fails.\n"
"  --quiet                  quiet operation, minimal output.\n"
"  --help                   show this help message.\n"
"  --version                show the version.\n"
"\n"
msgstr ""
"選項：\n"
"  --admindir <目錄>        設定 statoverride 檔的目錄。\n"
"  --update                 立即更新檔案權限。\n"
"  --force                  即使未通過正確性檢查，也強制進行動作。\n"
"  --quiet                  安靜模式，儘量不顯示訊息。\n"
"  --help                   顯示這個說明訊息。\n"
"  --version                顯示版本資訊。\n"
"\n"

#: src/statcmd.c:112
msgid "stripping trailing /"
msgstr "除去結尾的 /"

#: src/statcmd.c:227
#, c-format
msgid "--%s needs four arguments"
msgstr "--%s 需要四個參數"

#: src/statcmd.c:230
#, fuzzy
#| msgid "package may not contain newlines"
msgid "path may not contain newlines"
msgstr "<套件> 不該包含換行符號"

#: src/statcmd.c:237
#, c-format
msgid ""
"an override for '%s' already exists, but --force specified so will be ignored"
msgstr "設定了 '%s' 的優先選項，但加上 --force 後，會被忽略"

#: src/statcmd.c:241
#, c-format
msgid "an override for '%s' already exists; aborting"
msgstr "已設定了 '%s' 的強制選項，放棄"

#: src/statcmd.c:253
#, c-format
msgid "--update given but %s does not exist"
msgstr "要 --update 但找不到 %s"

#: src/statcmd.c:277
msgid "no override present"
msgstr "沒有設定強制選項"

#: src/statcmd.c:285
msgid "--update is useless for --remove"
msgstr "--remove 時 --update 無效"

#: src/statdb.c:59
msgid "syntax error: invalid uid in statoverride file"
msgstr "語法錯誤：statoverride 檔的 uid 無效"

#: src/statdb.c:64
#, c-format
msgid "syntax error: unknown user '%s' in statoverride file"
msgstr "語法錯誤：statoverride 的使用者 '%s' 不明"

#: src/statdb.c:84
msgid "syntax error: invalid gid in statoverride file"
msgstr "語法錯誤：statoverride 的 gid 無效"

#: src/statdb.c:89
#, c-format
msgid "syntax error: unknown group '%s' in statoverride file"
msgstr "語法錯誤：statoverride 檔中未知的 '%s' 群組"

#: src/statdb.c:105
msgid "syntax error: invalid mode in statoverride file"
msgstr "語法錯誤：statoverride 檔權限錯誤"

#: src/statdb.c:130
msgid "failed to open statoverride file"
msgstr "無法開啟 statoverride 檔"

#: src/statdb.c:135
msgid "failed to fstat statoverride file"
msgstr "無法 fstat statoverride 檔"

#: src/statdb.c:182
#, c-format
msgid "reading statoverride file '%.250s'"
msgstr "讀取 statoverride 檔 '%.250s'"

#: src/statdb.c:190
msgid "statoverride file is missing final newline"
msgstr "statoverride 檔檔尾沒有換行"

#: src/statdb.c:194
msgid "statoverride file contains empty line"
msgstr "statoverride 檔有空行"

#: src/statdb.c:200 src/statdb.c:213 src/statdb.c:226
msgid "syntax error in statoverride file"
msgstr "statoverride 檔語法錯誤"

#: src/statdb.c:208 src/statdb.c:221 src/statdb.c:234
msgid "unexpected end of line in statoverride file"
msgstr "statoverride 檔行尾意外中斷"

#: src/statdb.c:238
#, c-format
msgid "multiple statoverrides present for file '%.250s'"
msgstr "檔案 '%.250s' 有好幾個 statoverride 檔"

#: src/trigcmd.c:45
msgid "Type dpkg-trigger --help for help about this utility."
msgstr "輸入 dpkg-trigger --help 以取得這個工具的說明。"

#: src/trigcmd.c:50
#, c-format
msgid "Debian %s package trigger utility version %s.\n"
msgstr "Debian %s 套件觸發程式工具 %s 版。\n"

#: src/trigcmd.c:66
#, c-format
msgid ""
"Usage: %s [<options> ...] <trigger-name>\n"
"       %s [<options> ...] <command>\n"
"\n"
msgstr ""
"用法：%s [<選項> ...] <觸發程式>\n"
"      %s [<選項> ...] <命令>\n"
"\n"

#: src/trigcmd.c:71
#, c-format
msgid ""
"Commands:\n"
"  --check-supported                Check if the running dpkg supports "
"triggers.\n"
"\n"
msgstr ""
"指令：\n"
"  --check-supported                檢查執行中的 dpkg 有沒有支援觸發。\n"
"\n"

#: src/trigcmd.c:81
#, c-format
msgid ""
"Options:\n"
"  --admindir=<directory>           Use <directory> instead of %s.\n"
"  --by-package=<package>           Override trigger awaiter (normally set\n"
"                                     by dpkg).\n"
"  --no-await                       No package needs to await the "
"processing.\n"
"  --no-act                         Just test - don't actually change "
"anything.\n"
"\n"
msgstr ""
"選項：\n"
"  --admindir=<目錄>                用 <目錄> 取代 %s。\n"
"  --by-package=<套件>              強制觸發等待中的觸發程式\n"
"                                   （通常由 dpkg 設定）。\n"
"  --no-await                       套件不用等待處理。\n"
"  --no-act                         只有測試 - 不要真的有任何異動。\n"
"\n"

#: src/trigcmd.c:124
msgid "must be called from a maintainer script (or with a --by-package option)"
msgstr "須由維護者程式（或以 --by-package 選項）呼叫"

#: src/trigcmd.c:180
msgid "triggers data directory not yet created"
msgstr "還沒建立觸發資料目錄"

#: src/trigcmd.c:183
msgid "trigger records not yet in existence"
msgstr "還沒有觸發記錄"

#: src/trigcmd.c:225
msgid "takes one argument, the trigger name"
msgstr "需要一個參數：觸發程式名稱"

#: src/trigcmd.c:229
#, c-format
msgid "illegal awaited package name '%.250s': %.250s"
msgstr "不合法的等待套件名稱 '%.250s'：%.250s"

#: src/trigcmd.c:235
#, c-format
msgid "invalid trigger name `%.250s': %.250s"
msgstr "不正確的觸發程式名稱 `%.250s'：%.250s"

#: src/trigproc.c:271
msgid ""
"cycle found while processing triggers:\n"
" chain of packages whose triggers are or may be responsible:"
msgstr ""
"在處理觸發時發生循環：\n"
" 可能造成問題的連瑣套件："

#: src/trigproc.c:279
#, c-format
msgid ""
"\n"
" packages' pending triggers which are or may be unresolvable:\n"
msgstr ""
"\n"
" 套件尚待執行的觸發程式可能無法解決：\n"

#: src/trigproc.c:304
msgid "triggers looping, abandoned"
msgstr "觸發程式陷入迴圈，已放棄執行"

#: src/trigproc.c:336
#, fuzzy, c-format
#| msgid "Processing triggers for %s ...\n"
msgid "Processing triggers for %s (%s) ...\n"
msgstr "執行 %s 的觸發程式 ...\n"

#: src/unpack.c:76
#, c-format
msgid ".../%s"
msgstr ".../%s"

#: src/unpack.c:96
#, c-format
msgid "error ensuring `%.250s' doesn't exist"
msgstr "在確保檔案 `%.250s' 是否存在時發生錯誤"

#: src/unpack.c:104
msgid "split package reassembly"
msgstr "切分套件重組"

#: src/unpack.c:113
msgid "reassembled package file"
msgstr "重新組裝成的套件檔"

#: src/unpack.c:138
#, c-format
msgid "Authenticating %s ...\n"
msgstr "驗証 %s ...\n"

#: src/unpack.c:144
msgid "package signature verification"
msgstr "套件簽名驗證"

#: src/unpack.c:151
#, c-format
msgid "verification on package %s failed!"
msgstr "套件 %s 沒有通過驗証！"

#: src/unpack.c:153
#, c-format
msgid ""
"verification on package %s failed; but installing anyway as you requested"
msgstr "套件 %s 未通過驗証，但還是應您的要求強制安裝"

#: src/unpack.c:156
#, c-format
msgid "passed\n"
msgstr "通過\n"

#: src/unpack.c:169 dpkg-deb/info.c:81
msgid "unable to create temporary directory"
msgstr "無法建立暫時工作目錄"

#: src/unpack.c:223
#, c-format
msgid "old version of package has overly-long info file name starting `%.250s'"
msgstr "舊版套件中包含檔名太長的資訊檔，開頭為 `%.250s'"

#: src/unpack.c:261
#, c-format
msgid "unable to remove obsolete info file `%.250s'"
msgstr "無法移除作廢的資訊檔 `%.250s'"

#: src/unpack.c:266
#, c-format
msgid "unable to install (supposed) new info file `%.250s'"
msgstr "無法安裝（應該是）新的資訊檔 `%.250s'"

#: src/unpack.c:276
msgid "unable to open temp control directory"
msgstr "無法開啟暫時的控制目錄"

#: src/unpack.c:287
#, c-format
msgid "package contains overly-long control info file name (starting `%.50s')"
msgstr "套件包含了檔名太長的控制資訊檔（其開頭為 `%.250s'）"

#: src/unpack.c:294
#, c-format
msgid "package control info contained directory `%.250s'"
msgstr "套件的控制資訊中包含了目錄 `%.250s'"

#: src/unpack.c:296
#, c-format
msgid "package control info rmdir of `%.250s' didn't say not a dir"
msgstr "套件控制資訊中刪除目錄 '%.250s'，但沒有說這不是目錄"

#: src/unpack.c:306
#, c-format
msgid "package %s contained list as info file"
msgstr "套件 %s 包含作為資訊檔的清單"

#: src/unpack.c:314
#, c-format
msgid "unable to install new info file `%.250s' as `%.250s'"
msgstr "無法把新的資訊檔 `%.250s' 安裝為 `%.250s'"

#: src/unpack.c:339
#, c-format
msgid "(Noting disappearance of %s, which has been completely replaced.)\n"
msgstr "（注意到 %s 已經不復存在，它已被完全取代了。）\n"

#: src/unpack.c:446
msgid "cannot access archive"
msgstr "無法存取壓縮檔"

#: src/unpack.c:468
msgid "package control information extraction"
msgstr "解開套件控制資訊"

#: src/unpack.c:503
#, c-format
msgid "Recorded info about %s from %s.\n"
msgstr "從 %2$s 獲得關於 %1$s 的記錄。\n"

#: src/unpack.c:513
#, c-format
msgid "package architecture (%s) does not match system (%s)"
msgstr "套件的系統平台 (%s) 與本機系統 (%s) 不符"

#: src/unpack.c:576
#, c-format
msgid ""
"regarding %s containing %s, pre-dependency problem:\n"
"%s"
msgstr ""
"包含 %2$s 的 %1$s 中的預先相依問題：\n"
"%3$s"

#: src/unpack.c:580
#, c-format
msgid "pre-dependency problem - not installing %.250s"
msgstr "預先相依問題 - 不會安裝 %.250s"

#: src/unpack.c:582
msgid "ignoring pre-dependency problem!"
msgstr "忽視預先相依問題！"

#: src/unpack.c:597
#, fuzzy, c-format
#| msgid "Preparing to replace %s %s (using %s) ...\n"
msgid "Preparing to unpack %s ...\n"
msgstr "正準備替換 %s %s（使用 %s）...\n"

#: src/unpack.c:632
#, c-format
msgid "name of conffile (starting `%.250s') is too long (>%d characters)"
msgstr "conffile 的檔案名（開頭是 `%.250s'）過長（> %d 個字元）"

#: src/unpack.c:686 utils/update-alternatives.c:2157
#, c-format
msgid "read error in %.250s"
msgstr "在 %.250s 中發生讀取錯誤"

#: src/unpack.c:688
#, c-format
msgid "error closing %.250s"
msgstr "在關閉 %.250s 時發生錯誤"

#: src/unpack.c:735
#, fuzzy, c-format
#| msgid "De-configuring %s, to allow removal of %s ...\n"
msgid "De-configuring %s (%s), to allow removal of %s (%s) ...\n"
msgstr "解除 %s 的設定，以便移除 %s ...\n"

#: src/unpack.c:741
#, fuzzy, c-format
#| msgid "De-configuring %s ...\n"
msgid "De-configuring %s (%s) ...\n"
msgstr "解除 %s 的設定...\n"

#: src/unpack.c:833
#, fuzzy, c-format
#| msgid "Unpacking %s (from %s) ...\n"
msgid "Unpacking %s (%s) ...\n"
msgstr "解開 %s（從 %s）...\n"

#: src/unpack.c:837
#, fuzzy, c-format
#| msgid "Unpacking %s (from %s) ...\n"
msgid "Unpacking %s (%s) over (%s) ...\n"
msgstr "解開 %s（從 %s）...\n"

#: src/unpack.c:925
msgid "package filesystem archive extraction"
msgstr "套件檔案系統壓縮檔解壓縮"

#: src/unpack.c:940
msgid "error reading dpkg-deb tar output"
msgstr "在讀取 dpkg-deb 輸出的 tar 檔時發生錯誤"

#: src/unpack.c:942
msgid "corrupted filesystem tarfile - corrupted package archive"
msgstr "檔案系統 tar 檔已損壞 - 套件壓縮檔毀損"

#: src/unpack.c:946
#, c-format
msgid "cannot zap possible trailing zeros from dpkg-deb: %s"
msgstr "無法由 dpkg-deb 截掉可能的檔尾 0：%s"

#: src/unpack.c:1005
#, c-format
msgid "could not stat old file '%.250s' so not deleting it: %s"
msgstr "無法取得舊檔 '%.250s' 的檔案資訊，所以不會刪除：%s"

#: src/unpack.c:1013
#, c-format
msgid "unable to delete old directory '%.250s': %s"
msgstr "無法刪除舊目錄 '%.250s'：%s"

#: src/unpack.c:1016
#, c-format
msgid "old conffile '%.250s' was an empty directory (and has now been deleted)"
msgstr "舊的 conffile '%.250s' 是空目錄（現已刪除）"

#: src/unpack.c:1063
#, c-format
msgid "unable to stat other new file `%.250s'"
msgstr "無法取得其它新檔 `%.250s' 的檔案資訊"

#: src/unpack.c:1074
#, c-format
msgid ""
"old file '%.250s' is the same as several new files! (both '%.250s' and "
"'%.250s')"
msgstr "舊檔 '%.250s' 與幾個新檔案相同！（'%.250s' 和 '%.250s'）"

#: src/unpack.c:1115
#, c-format
msgid "unable to securely remove old file '%.250s': %s"
msgstr "無法安全刪除舊檔 '%.250s'：%s"

#: src/update.c:52
#, c-format
msgid "--%s needs exactly one Packages-file argument"
msgstr "--%s 需要一個套件檔參數，不多不少"

#: src/update.c:62
msgid "unable to access dpkg status area for bulk available update"
msgstr "無法存取 dpkg 的狀態庫，以進行批次可用套件更新"

#: src/update.c:64
msgid "bulk available update requires write access to dpkg status area"
msgstr "要進行批次可用套件更新，需在 dpkg 狀態庫有寫入權限"

#: src/update.c:71
#, c-format
msgid "Replacing available packages info, using %s.\n"
msgstr "用 %s 取代可用套件資訊。\n"

#: src/update.c:74
#, c-format
msgid "Updating available packages info, using %s.\n"
msgstr "用 %s 更新可用套件的資訊。\n"

#: src/update.c:98
#, c-format
msgid "Information about %d package was updated.\n"
msgid_plural "Information about %d packages was updated.\n"
msgstr[0] "更新了 %d 個套件的相關資訊。\n"

#: src/update.c:112
#, c-format
msgid ""
"obsolete '--%s' option; unavailable packages are automatically cleaned up"
msgstr "已作廢的 '--%s' 選項：無法安裝的套件會自動清除"

#: dpkg-deb/build.c:125
#, c-format
msgid "file name '%.50s...' is too long"
msgstr "檔名 '%.50s...' 太長了"

#: dpkg-deb/build.c:130
#, c-format
msgid "unable to stat file name '%.250s'"
msgstr "無法取得 '%.250s' 的檔案資訊"

#: dpkg-deb/build.c:203 dpkg-deb/build.c:214
#, c-format
msgid "failed to write filename to tar pipe (%s)"
msgstr "無法寫入檔名到 tar 的輸出入轉向 (%s)"

#: dpkg-deb/build.c:204 dpkg-deb/build.c:214 dpkg-deb/build.c:583
#: dpkg-deb/build.c:586 dpkg-deb/build.c:631
msgid "data member"
msgstr "資料成員"

#: dpkg-deb/build.c:239
msgid "unable to stat control directory"
msgstr "無法取得控制目錄的檔案資訊"

#: dpkg-deb/build.c:241
msgid "control directory is not a directory"
msgstr "控制目錄所在不是目錄"

#: dpkg-deb/build.c:243
#, c-format
msgid "control directory has bad permissions %03lo (must be >=0755 and <=0775)"
msgstr "控制目錄的權限為 %03lo 並不正確（必須 >=0755 且 <=0755）"

#: dpkg-deb/build.c:254
#, c-format
msgid "maintainer script `%.50s' is not a plain file or symlink"
msgstr "維護者程式 `%.50s' 不是普通檔案或符號連結"

#: dpkg-deb/build.c:257
#, c-format
msgid ""
"maintainer script `%.50s' has bad permissions %03lo (must be >=0555 and "
"<=0775)"
msgstr "維護者程式 `%.50s' 的權限 %03lo 有問題（必須 >=0555 且 <=0775）"

#: dpkg-deb/build.c:261
#, c-format
msgid "maintainer script `%.50s' is not stattable"
msgstr "無法取得維護者程式 `%.50s' 的狀態"

#: dpkg-deb/build.c:287
msgid "error opening conffiles file"
msgstr "在開啟 conffile 檔時發生錯誤"

#: dpkg-deb/build.c:296
msgid "empty string from fgets reading conffiles"
msgstr "在以 fgets 讀取 conffile 時，傳回了空字串"

#: dpkg-deb/build.c:301
#, c-format
msgid "conffile name '%.50s...' is too long, or missing final newline"
msgstr "conffile 名稱 '%.50s' 太長，或檔尾沒有換行"

#: dpkg-deb/build.c:314
#, c-format
msgid "conffile filename '%s' contains trailing white spaces"
msgstr "conffile 檔名 '%s' 的結尾有空白字元"

#: dpkg-deb/build.c:316
#, c-format
msgid "conffile `%.250s' does not appear in package"
msgstr "在套件裡沒有找到 conffile `%.250s'"

#: dpkg-deb/build.c:318
#, c-format
msgid "conffile `%.250s' is not stattable"
msgstr "無法取得 conffile `%.50s' 的狀態"

#: dpkg-deb/build.c:320
#, c-format
msgid "conffile '%s' is not a plain file"
msgstr "conffile '%s' 不是普通檔案"

#: dpkg-deb/build.c:324
#, c-format
msgid "conffile name '%s' is duplicated"
msgstr "conffile 檔名 '%s' 已重複"

#: dpkg-deb/build.c:337
msgid "error reading conffiles file"
msgstr "在讀取 conffile 檔時發生錯誤"

#: dpkg-deb/build.c:390
msgid "package name has characters that aren't lowercase alphanums or `-+.'"
msgstr "套件的名字含有不是英數字或 `-+.' 的字元"

#: dpkg-deb/build.c:392
#, c-format
msgid "'%s' contains user-defined Priority value '%s'"
msgstr "'%s' 包含使用者自訂的優先等級 '%s'"

#: dpkg-deb/build.c:398
#, c-format
msgid "'%s' contains user-defined field '%s'"
msgstr "'%s' 包含使用者自訂欄位 '%s'"

#: dpkg-deb/build.c:409
#, c-format
msgid "ignoring %d warning about the control file(s)"
msgid_plural "ignoring %d warnings about the control file(s)"
msgstr[0] "忽略 %d 個有關控制檔的警告"

#: dpkg-deb/build.c:452 utils/update-alternatives.c:2645
#: utils/update-alternatives.c:2652
#, c-format
msgid "--%s needs a <directory> argument"
msgstr "--%s 需有 <目錄名> 參數"

#: dpkg-deb/build.c:463
#, c-format
msgid "unable to check for existence of archive `%.250s'"
msgstr "無法判斷壓縮檔 `%.250s' 是否存在"

#: dpkg-deb/build.c:480
msgid "target is directory - cannot skip control file check"
msgstr "目的地是目錄 - 無法略過控制檔檢查"

#: dpkg-deb/build.c:481
msgid "not checking contents of control area"
msgstr "不檢查控制區的內容"

#: dpkg-deb/build.c:482
#, c-format
msgid "dpkg-deb: building an unknown package in '%s'.\n"
msgstr "dpkg-deb：把不明套件製作為 '%s'。\n"

#: dpkg-deb/build.c:489
#, c-format
msgid "dpkg-deb: building package `%s' in `%s'.\n"
msgstr "dpkg-deb：把套件 `%s' 製作為 `%s'。\n"

#: dpkg-deb/build.c:518 dpkg-deb/build.c:583
#, c-format
msgid "failed to make temporary file (%s)"
msgstr "無法建立暫時工作檔 (%s)"

#: dpkg-deb/build.c:518 dpkg-deb/build.c:521 dpkg-deb/build.c:542
#: dpkg-deb/build.c:551 dpkg-deb/build.c:557
msgid "control member"
msgstr "控制成員"

#: dpkg-deb/build.c:521 dpkg-deb/build.c:586
#, c-format
msgid "failed to unlink temporary file (%s), %s"
msgstr "無法刪除暫時工作檔 (%s)，%s"

#: dpkg-deb/build.c:534
msgid "compressing control member"
msgstr "壓縮控制成員"

#: dpkg-deb/build.c:542 dpkg-deb/build.c:631
#, c-format
msgid "failed to rewind temporary file (%s)"
msgstr "無法跳到暫時工作檔的開頭 (%s)"

#: dpkg-deb/build.c:551
#, c-format
msgid "failed to stat temporary file (%s)"
msgstr "無法取得暫時工作檔 (%s) 的檔案資訊"

#: dpkg-deb/build.c:555
#, c-format
msgid "error writing `%s'"
msgstr "`%s' 寫入錯誤"

#: dpkg-deb/build.c:557
#, c-format
msgid "cannot copy '%s' into archive '%s': %s"
msgstr "無法將 '%s' 複製到壓縮檔 '%s' 中：%s"

#: dpkg-deb/build.c:610
msgid "compressing data member"
msgstr "壓縮資料成員"

#: dpkg-deb/build.c:621
msgid "<compress> from tar -cf"
msgstr "以 tar -cf <壓縮>"

#: dpkg-deb/extract.c:63 dpkg-deb/extract.c:65
msgid "shell command to move files"
msgstr "搬移檔案的 shell 指令"

#: dpkg-deb/extract.c:72
#, c-format
msgid "unexpected end of file in %s in %.255s"
msgstr "在 %2$.255s 中的 %1$s 有預期之外的檔案結束符號"

#: dpkg-deb/extract.c:74
#, c-format
msgid "error reading %s from file %.255s"
msgstr "無法從檔案 %2$.255s 讀取 %1$s"

#: dpkg-deb/extract.c:129
#, c-format
msgid "failed to read archive `%.255s'"
msgstr "無法讀取壓縮檔 `%.255s'"

#: dpkg-deb/extract.c:131
msgid "failed to fstat archive"
msgstr "無法 fstat 取得壓縮檔的檔案資訊"

#: dpkg-deb/extract.c:135
msgid "archive magic version number"
msgstr "壓縮檔識別版號"

#: dpkg-deb/extract.c:145
msgid "archive member header"
msgstr "壓縮檔成員標頭"

#: dpkg-deb/extract.c:150
#, c-format
msgid "file '%.250s' is corrupt - bad archive header magic"
msgstr "檔案 '%.250s' 損毀 - 壓縮標頭識別碼錯誤"

#: dpkg-deb/extract.c:156
#, c-format
msgid "file `%.250s' is not a debian binary archive (try dpkg-split?)"
msgstr "檔案 `%.250s' 不是 debian 的二進制壓縮檔（試試 dpkg-split？）"

#: dpkg-deb/extract.c:160
msgid "archive information header member"
msgstr "壓縮檔資訊標頭成員"

#: dpkg-deb/extract.c:164 dpkg-deb/extract.c:234
msgid "archive has no newlines in header"
msgstr "壓縮檔檔案標頭中沒有換行"

#: dpkg-deb/extract.c:167 dpkg-deb/extract.c:237
#, c-format
msgid "archive has invalid format version: %s"
msgstr "壓縮檔格式版號無效：%s"

#: dpkg-deb/extract.c:169
#, c-format
msgid "archive is format version %d.%d; get a newer dpkg-deb"
msgstr "壓縮檔格式版號 %d.%d，請升級 dpkg-deb"

#: dpkg-deb/extract.c:179 dpkg-deb/extract.c:212
#, c-format
msgid "cannot skip archive member from '%s': %s"
msgstr "無法在 '%s' 中，跳過壓縮檔成員：%s"

#: dpkg-deb/extract.c:185 dpkg-deb/extract.c:199
#, fuzzy, c-format
#| msgid "archive '%.250s' contains not understood data member %.*s, giving up"
msgid "archive '%s' has premature member '%.*s' before '%s', giving up"
msgstr "壓縮檔 '%.250s' 有不明的資料成員 %.*s，放棄執行"

#: dpkg-deb/extract.c:195
#, fuzzy, c-format
#| msgid "archive '%.250s' contains not understood data member %.*s, giving up"
msgid "archive '%s' uses unknown compression for member '%.*s', giving up"
msgstr "壓縮檔 '%.250s' 有不明的資料成員 %.*s，放棄執行"

#: dpkg-deb/extract.c:206
#, c-format
msgid "archive '%.250s' contains two control members, giving up"
msgstr "壓縮檔 '%.250s' 有兩個控制成員，放棄執行"

#: dpkg-deb/extract.c:221
#, c-format
msgid ""
" new debian package, version %d.%d.\n"
" size %jd bytes: control archive=%jd bytes.\n"
msgstr ""
" 新式 debian 套件，版本 %d.%d。\n"
" 大小為 %jd 位元組：控制壓縮檔=%jd 位元組。\n"

#: dpkg-deb/extract.c:241
msgid "archive control member size"
msgstr "壓縮檔控制成員大小"

#: dpkg-deb/extract.c:244
#, c-format
msgid "archive has malformatted control member size '%s'"
msgstr "壓縮檔的控制成員大小 '%s' 格式混亂"

#: dpkg-deb/extract.c:251
#, c-format
msgid "cannot skip archive control member from '%s': %s"
msgstr "無法在 '%s' 中，跳過壓縮檔控制成員：%s"

#: dpkg-deb/extract.c:256
#, c-format
msgid ""
" old debian package, version %d.%d.\n"
" size %jd bytes: control archive=%jd, main archive=%jd.\n"
msgstr ""
" 舊式 debian 套件，版本 %d.%d。\n"
" 大小為 %jd 位元組：控制壓縮檔=%jd，主壓縮檔=%jd。\n"

#: dpkg-deb/extract.c:265
msgid ""
"file looks like it might be an archive which has been\n"
" corrupted by being downloaded in ASCII mode"
msgstr ""
"檔案很像壓縮檔，\n"
"但因為以文字模式下載而損毀"

#: dpkg-deb/extract.c:269
#, c-format
msgid "`%.255s' is not a debian format archive"
msgstr "`%.255s' 不是 debian 格式的壓縮檔"

#: dpkg-deb/extract.c:277
#, c-format
msgid "cannot copy archive member from '%s' to decompressor pipe: %s"
msgstr "無法將壓縮檔成員 '%s' 解壓縮到輸出轉向上：%s"

#: dpkg-deb/extract.c:280
msgid "cannot close decompressor pipe"
msgstr "無法關閉解壓縮的輸出轉向"

#: dpkg-deb/extract.c:297
msgid "decompressing archive member"
msgstr "解壓縮壓縮檔成員"

#: dpkg-deb/extract.c:338
msgid "failed to chdir to directory"
msgstr "無法切換到目錄"

#: dpkg-deb/extract.c:341
msgid "failed to create directory"
msgstr "無法建立目錄"

#: dpkg-deb/extract.c:343
msgid "failed to chdir to directory after creating it"
msgstr "建立目錄後，無法切換到該目錄"

#: dpkg-deb/extract.c:353
msgid "<decompress>"
msgstr "<解壓縮>"

#: dpkg-deb/extract.c:355
msgid "paste"
msgstr "貼上"

#: dpkg-deb/extract.c:377 dpkg-deb/extract.c:392 dpkg-deb/info.c:77
#, c-format
msgid "--%s needs a .deb filename argument"
msgstr "--%s 需要一個 .deb 檔名作為參數"

#: dpkg-deb/extract.c:379
#, c-format
msgid "--%s takes only one argument (.deb filename)"
msgstr "--%s 只需一個參數（.deb 檔名）"

#: dpkg-deb/extract.c:398 dpkg-deb/extract.c:426 dpkg-deb/extract.c:460
#, c-format
msgid "--%s takes at most two arguments (.deb and directory)"
msgstr "--%s 至多可有兩個參數（.deb 和目錄）"

#: dpkg-deb/extract.c:417 dpkg-deb/extract.c:451
#, fuzzy, c-format
#| msgid "--%s needs a .deb filename argument"
msgid "--%s needs .deb filename and directory arguments"
msgstr "--%s 需要一個 .deb 檔名作為參數"

#: dpkg-deb/extract.c:422 dpkg-deb/extract.c:456
#, c-format
msgid ""
"--%s needs a target directory.\n"
"Perhaps you should be using dpkg --install ?"
msgstr ""
"--%s 需要一個目的地目錄。\n"
"或許您應該使用 dpkg --install？"

#: dpkg-deb/info.c:63
msgid "failed to chdir to `/' for cleanup"
msgstr "無法 chdir 到 `/' 以清理"

#: dpkg-deb/info.c:108
#, c-format
msgid "cannot extract control file '%s' from '%s': %s"
msgstr "無法由 '%2$s' 讀取設定檔 '%1$s'：%3$s"

#: dpkg-deb/info.c:112
#, c-format
msgid "'%.255s' contains no control component '%.255s'"
msgstr "'%.255s' 中沒有控制元件 '%.255s'"

#: dpkg-deb/info.c:116
#, c-format
msgid "open component `%.255s' (in %.255s) failed in an unexpected way"
msgstr "在開啟元件 `%.255s'（位於 %.255s）時以意想不到的方式失敗了"

#: dpkg-deb/info.c:123
#, c-format
msgid "%d requested control component is missing"
msgid_plural "%d requested control components are missing"
msgstr[0] "找不到 %d 個要求的控制元件"

#: dpkg-deb/info.c:141 utils/update-alternatives.c:1092
#, c-format
msgid "cannot scan directory `%.255s'"
msgstr "無法掃瞄目錄 `%.255s'"

#: dpkg-deb/info.c:150
#, c-format
msgid "cannot stat `%.255s' (in `%.255s')"
msgstr "無法取得 `%.255s' 的檔案資訊（於 `%.255s'）"

#: dpkg-deb/info.c:154
#, c-format
msgid "cannot open `%.255s' (in `%.255s')"
msgstr "無法開啟 `%.255s'（位於 `%.255s'）"

#: dpkg-deb/info.c:169 dpkg-deb/info.c:187 dpkg-deb/info.c:201
#, c-format
msgid "failed to read `%.255s' (in `%.255s')"
msgstr "無法讀取 `%.255s'（位於 `%.255s'）"

#: dpkg-deb/info.c:172
#, c-format
msgid " %7jd bytes, %5d lines   %c  %-20.127s %.127s\n"
msgstr " %7jd 位元組，%5d 行    %c  %-20.127s %.127s\n"

#: dpkg-deb/info.c:176
#, c-format
msgid "     not a plain file          %.255s\n"
msgstr "     不是普通檔案              %.255s\n"

#: dpkg-deb/info.c:188
msgid "(no `control' file in control archive!)\n"
msgstr "（在控制壓縮檔中沒有 `control' 檔！)\n"

#: dpkg-deb/info.c:224
msgid "could not open the `control' component"
msgstr "無法開啟 `control' 元件"

#: dpkg-deb/info.c:263
msgid "failed during read of `control' component"
msgstr "在讀取 `control' 元件時失敗"

#: dpkg-deb/info.c:265
#, c-format
msgid "error closing the '%s' component"
msgstr "關閉 '%s' 元件時發生錯誤"

#: dpkg-deb/main.c:55
#, c-format
msgid "Debian `%s' package archive backend version %s.\n"
msgstr "Debian `%s' 套件壓縮檔後端版本 %s。\n"

#: dpkg-deb/main.c:74
#, c-format
msgid ""
"Commands:\n"
"  -b|--build <directory> [<deb>]   Build an archive.\n"
"  -c|--contents <deb>              List contents.\n"
"  -I|--info <deb> [<cfile> ...]    Show info to stdout.\n"
"  -W|--show <deb>                  Show information on package(s)\n"
"  -f|--field <deb> [<cfield> ...]  Show field(s) to stdout.\n"
"  -e|--control <deb> [<directory>] Extract control info.\n"
"  -x|--extract <deb> <directory>   Extract files.\n"
"  -X|--vextract <deb> <directory>  Extract & list files.\n"
"  -R|--raw-extract <deb> <directory>\n"
"                                   Extract control info and files.\n"
"  --fsys-tarfile <deb>             Output filesystem tarfile.\n"
"\n"
msgstr ""
"指令：\n"
"  -b|--build <目錄> [<deb>]        製作壓縮檔。\n"
"  -c|--contents <deb>              列出檔案。\n"
"  -I|--info <deb> [<cfile> ...]    顯示 info 至標準輸出。\n"
"  -W|--show <deb>                  顯示套件資訊\n"
"  -f|--field <deb> [<cfield> ...]  顯示欄位至標準輸出。\n"
"  -e|--control <deb> [<目錄>]      解壓縮控制資訊。\n"
"  -x|--extract <deb> <目錄>        解壓縮檔案。\n"
"  -X|--vextract <deb> <目錄>       解壓縮並列出檔案。\n"
"  -R|--raw-extract <deb> <目錄>\n"
"                                   解壓縮控制資訊和檔案。\n"
"  --fsys-tarfile <deb>             輸出檔案系統的 tar 檔。\n"
"\n"

#: dpkg-deb/main.c:94
#, c-format
msgid ""
"<deb> is the filename of a Debian format archive.\n"
"<cfile> is the name of an administrative file component.\n"
"<cfield> is the name of a field in the main `control' file.\n"
"\n"
msgstr ""
"<deb> 是 Debian 格式壓縮檔的檔名。\n"
"<cfile> 是某個管理用的檔案元件的名稱。\n"
"<cfield> 是主 `控制' 檔中的一個欄位名稱。\n"
"\n"

#: dpkg-deb/main.c:100
#, fuzzy, c-format
#| msgid ""
#| "Options:\n"
#| "  --showformat=<format>            Use alternative format for --show.\n"
#| "  -v, --verbose                    Enable verbose output.\n"
#| "  -D                               Enable debugging output.\n"
#| "  --old, --new                     Select archive format.\n"
#| "  --nocheck                        Suppress control file check (build "
#| "bad\n"
#| "                                     packages).\n"
#| "  -z#                              Set the compression level when "
#| "building.\n"
#| "  -Z<type>                         Set the compression type used when "
#| "building.\n"
#| "                                     Allowed types: gzip, xz, bzip2, "
#| "none.\n"
#| "  -S<strategy>                     Set the compression strategy when "
#| "building.\n"
#| "                                     Allowed values: none, extreme (xz).\n"
#| "\n"
msgid ""
"Options:\n"
"  --showformat=<format>            Use alternative format for --show.\n"
"  -v, --verbose                    Enable verbose output.\n"
"  -D, --debug                      Enable debugging output.\n"
"      --deb-format=<format>        Select archive format.\n"
"                                     Allowed values: 0.939000, 2.0 "
"(default).\n"
"      --old                        Legacy alias for '--deb-"
"format=0.939000'.\n"
"      --new                        Legacy alias for '--deb-format=2.0'.\n"
"  --nocheck                        Suppress control file check (build bad\n"
"                                     packages).\n"
"  -z#                              Set the compression level when building.\n"
"  -Z<type>                         Set the compression type used when "
"building.\n"
"                                     Allowed types: gzip, xz, bzip2, none.\n"
"  -S<strategy>                     Set the compression strategy when "
"building.\n"
"                                     Allowed values: none; extreme (xz);\n"
"                                     filtered, huffman, rle, fixed (gzip).\n"
"\n"
msgstr ""
"選項：\n"
"  --showformat=<格式>        --show 使用其它輸出格式。\n"
"  -v, --verbose              啟用詳盡的資訊。\n"
"  -D                         啟用除錯資訊。\n"
"  --old, --new               選擇壓縮檔格式。\n"
"  --nocheck                  不檢查控制檔\n"
"                             （故意製作損壞的套件）。\n"
"  -z#                        設定製作時的壓縮等級。\n"
"  -Z<壓縮法>                 設定製作時的壓縮法。\n"
"                             可用的壓縮法：gzip、bzip2、lzma、none。\n"
"  -S<方式>                   在製作時指定壓縮方式。\n"
"                             可用方式：none、extreme (xz)。\n"
"\n"

#: dpkg-deb/main.c:128
#, fuzzy, c-format
#| msgid ""
#| "\n"
#| "Use `dpkg' to install and remove packages from your system, or\n"
#| "`dselect' or `aptitude' for user-friendly package management.  Packages\n"
#| "unpacked using `dpkg-deb --extract' will be incorrectly installed !\n"
msgid ""
"\n"
"Use 'dpkg' to install and remove packages from your system, or\n"
"'apt' or 'aptitude' for user-friendly package management. Packages\n"
"unpacked using 'dpkg-deb --extract' will be incorrectly installed !\n"
msgstr ""
"\n"
"使用 `dpkg' 來安裝和移除您系統上的套件，或是用 `dselect' 或 `aptitude'\n"
"等較人性化的套件管理程式。用 `dpkg-deb --extract' 來解開套件並不是正確\n"
"的安裝方式！\n"

#: dpkg-deb/main.c:139
msgid ""
"Type dpkg-deb --help for help about manipulating *.deb files;\n"
"Type dpkg --help for help about installing and deinstalling packages."
msgstr ""
"輸入 dpkg-deb --help 以取得如何操作 *.deb 檔的說明﹔\n"
"輸入 dpkg --help 以取得如何安裝和移除套件的說明。"

#: dpkg-deb/main.c:155
#, fuzzy, c-format
#| msgid "archive has invalid format version: %s"
msgid "invalid deb format version: %s"
msgstr "壓縮檔格式版號無效：%s"

#: dpkg-deb/main.c:161
#, fuzzy, c-format
#| msgid "unknown option '%s'"
msgid "unknown deb format version: %s"
msgstr "選項不明 '%s'"

#: dpkg-deb/main.c:195
#, c-format
msgid "invalid compression level for -%c: %ld'"
msgstr "-%c 的壓縮等級無效：%ld'"

#: dpkg-deb/main.c:205
#, c-format
msgid "unknown compression strategy '%s'!"
msgstr "壓縮方式 '%s' 不明！"

#: dpkg-deb/main.c:213
#, c-format
msgid "unknown compression type `%s'!"
msgstr "未知的壓縮類型 `%s'！"

#: dpkg-deb/main.c:215
#, c-format
msgid "deprecated compression type '%s'; use xz instead"
msgstr "不建議使用的壓縮法 '%s'，請改用 xz"

#: dpkg-deb/main.c:256
#, c-format
msgid "invalid compressor parameters: %s"
msgstr "壓縮參數無效：%s"

#: dpkg-split/info.c:55
#, c-format
msgid "file `%.250s' is corrupt - bad digit (code %d) in %s"
msgstr "檔案 `%1$.250s' 已損毀 - 在 %3$s 中有無效數字（代碼為 %2$d）"

#: dpkg-split/info.c:57
#, c-format
msgid "file '%s' is corrupt; out of range integer in %s"
msgstr "檔案 '%s' 已損毀 - %s 的整數超過範圍"

#: dpkg-split/info.c:65
#, c-format
msgid "file `%.250s' is corrupt - %.250s missing"
msgstr "檔案 `%.250s' 已損毀 - 沒有 %.250s"

#: dpkg-split/info.c:68
#, c-format
msgid "file `%.250s' is corrupt - missing newline after %.250s"
msgstr "檔案 `%.250s' 已損毀 - 在 %.250s 後沒有換行符號"

#: dpkg-split/info.c:95 dpkg-split/main.c:114
#, c-format
msgid "error reading %.250s"
msgstr "在讀取 %.250s 時發生錯誤"

#: dpkg-split/info.c:109
#, c-format
msgid "file `%.250s' is corrupt - bad magic at end of first header"
msgstr "檔案 `%.250s' 已損毀 - 在第一個檔案標頭的末尾有不正確的識別碼"

#: dpkg-split/info.c:119
#, c-format
msgid "file `%.250s' is corrupt - bad padding character (code %d)"
msgstr "檔案 `%.250s' 已損毀 - 不合宜的填充字元（代碼 %d）"

#: dpkg-split/info.c:123
#, c-format
msgid "file `%.250s' is corrupt - nulls in info section"
msgstr "檔案 `%.250s' 已損毀 - 資訊區段中有 null"

#: dpkg-split/info.c:129
msgid "format version number"
msgstr "版本版號"

#: dpkg-split/info.c:131
#, c-format
msgid "file '%.250s' has invalid format version: %s"
msgstr "檔案 '%.250s' 的格式版本無效：%s"

#: dpkg-split/info.c:133
#, c-format
msgid "file '%.250s' is format version %d.%d; get a newer dpkg-split"
msgstr "檔案 '%.250s' 的格式版本為 %d.%d：請升級 dpkg-split"

#: dpkg-split/info.c:136
msgid "package name"
msgstr "套件名稱"

#: dpkg-split/info.c:137
msgid "package version number"
msgstr "套件版號"

#: dpkg-split/info.c:138
msgid "package file MD5 checksum"
msgstr "套件檔 MD5 檢碼"

#: dpkg-split/info.c:141
#, c-format
msgid "file `%.250s' is corrupt - bad MD5 checksum `%.250s'"
msgstr "檔案 `%.250s' 損毀 - MD5 檢碼 `%.250s' 錯誤"

#: dpkg-split/info.c:143 dpkg-split/info.c:144
msgid "archive total size"
msgstr "壓縮檔完整大小"

#: dpkg-split/info.c:145 dpkg-split/info.c:146
msgid "archive part offset"
msgstr "壓縮檔切點"

#: dpkg-split/info.c:148
msgid "archive part numbers"
msgstr "壓縮分割號"

#: dpkg-split/info.c:151
#, c-format
msgid "file '%.250s' is corrupt - no slash between archive part numbers"
msgstr "檔案 '%.250s' 損毀 - 壓縮分割號間沒有斜線"

#: dpkg-split/info.c:154
msgid "number of archive parts"
msgstr "壓縮分割數"

#: dpkg-split/info.c:156
#, c-format
msgid "file '%.250s' is corrupt - bad number of archive parts"
msgstr "檔案 '%.250s' 已損毀 - 壓縮分割數錯誤"

#: dpkg-split/info.c:158
msgid "archive parts number"
msgstr "壓縮分割號"

#: dpkg-split/info.c:160
#, c-format
msgid "file '%.250s' is corrupt - bad archive part number"
msgstr "檔案 '%.250s' 已損毀 - 壓縮分割號錯誤"

#: dpkg-split/info.c:166
msgid "package architecture"
msgstr "套件硬體平台"

#: dpkg-split/info.c:175
#, c-format
msgid "file `%.250s' is corrupt - bad magic at end of second header"
msgstr "檔案 `%.250s' 損毀 - 第二個標頭檔尾的識別碼錯誤"

#: dpkg-split/info.c:177
#, c-format
msgid "file `%.250s' is corrupt - second member is not data member"
msgstr "檔案 `%.250s' 損毀 - 第二個成員不是資料成員"

#: dpkg-split/info.c:183
#, c-format
msgid "file `%.250s' is corrupt - wrong number of parts for quoted sizes"
msgstr "檔案 `%.250s' 損毀 - 該單位大小產生的分割數不符"

#: dpkg-split/info.c:187
#, c-format
msgid "file `%.250s' is corrupt - size is wrong for quoted part number"
msgstr "檔案 `%.250s' 損毀 - 該分割號的大小錯誤"

#: dpkg-split/info.c:193
#, c-format
msgid "unable to fstat part file `%.250s'"
msgstr "無法 fstat 取得分割檔 `%.250s' 的檔案資訊"

#: dpkg-split/info.c:198
#, c-format
msgid "file `%.250s' is corrupt - too short"
msgstr "檔案 `%.250s' 損毀 - 檔案太小"

#: dpkg-split/info.c:211 dpkg-split/info.c:258
#, c-format
msgid "cannot open archive part file `%.250s'"
msgstr "無法開啟套件檔的分割檔 `%.250s'"

#: dpkg-split/info.c:213
#, c-format
msgid "file `%.250s' is not an archive part"
msgstr "檔案 `%.250s' 不是壓縮分割檔"

#: dpkg-split/info.c:218
#, c-format
msgid ""
"%s:\n"
"    Part format version:            %d.%d\n"
"    Part of package:                %s\n"
"        ... version:                %s\n"
"        ... architecture:           %s\n"
"        ... MD5 checksum:           %s\n"
"        ... length:                 %jd bytes\n"
"        ... split every:            %jd bytes\n"
"    Part number:                    %d/%d\n"
"    Part length:                    %jd bytes\n"
"    Part offset:                    %jd bytes\n"
"    Part file size (used portion):  %jd bytes\n"
"\n"
msgstr ""
"%s：\n"
"    分割檔格式版本：                %d.%d\n"
"    分割檔的套件：                  %s\n"
"        ... 版本：                  %s\n"
"        ... 硬體平台：              %s\n"
"        ... MD5 檢碼：              %s\n"
"        ... 長度：                  %jd 位元組\n"
"        ... 分割單位：              %jd 位元組\n"
"    分割檔編號：                    %d/%d\n"
"    分割檔長度：                    %jd 位元組\n"
"    分割檔偏移位置：                %jd 位元組\n"
"    分割檔大小（用到的部分）：      %jd 位元組\n"
"\n"

#: dpkg-split/info.c:234
msgctxt "architecture"
msgid "<unknown>"
msgstr "<未知>"

#: dpkg-split/info.c:253 dpkg-split/join.c:110
#, c-format
msgid "--%s requires one or more part file arguments"
msgstr "--%s 需要一個以上分割檔當作參數"

#: dpkg-split/info.c:264
#, c-format
msgid "file `%s' is not an archive part\n"
msgstr "檔案 `%s' 不是壓縮分割檔\n"

#: dpkg-split/join.c:45
#, c-format
msgid "Putting package %s together from %d part: "
msgid_plural "Putting package %s together from %d parts: "
msgstr[0] "由 %2$d 個分割檔合成套件 %1$s："

#: dpkg-split/join.c:52
#, c-format
msgid "unable to open output file `%.250s'"
msgstr "無法開啟輸出檔 `%.250s'"

#: dpkg-split/join.c:58
#, c-format
msgid "unable to (re)open input part file `%.250s'"
msgstr "無法（重新）開啟做為輸入之用的分割檔 `%.250s'"

#: dpkg-split/join.c:60
#, c-format
msgid "cannot skip split package header for '%s': %s"
msgstr "無法跳過 '%s' 的分割套件標頭：%s"

#: dpkg-split/join.c:63
#, c-format
msgid "cannot append split package part '%s' to '%s': %s"
msgstr "無法把套件分割 '%s' 加到 '%s' 上：%s"

#: dpkg-split/join.c:74 dpkg-split/split.c:241
#, c-format
msgid "done\n"
msgstr "完成\n"

#: dpkg-split/join.c:90
#, c-format
msgid "files `%.250s' and `%.250s' are not parts of the same file"
msgstr "檔案 `%.250s' 和 `%.250s' 並不同屬一個檔案的分割檔"

#: dpkg-split/join.c:95
#, c-format
msgid "there are several versions of part %d - at least `%.250s' and `%.250s'"
msgstr "第 %d 個分割檔有好幾個版本 - 至少有 `%.250s' 和 `%.250s'"

#: dpkg-split/join.c:133
#, c-format
msgid "part %d is missing"
msgstr "缺少第 %d 個分割檔"

#: dpkg-split/main.c:48
#, c-format
msgid "Debian `%s' package split/join tool; version %s.\n"
msgstr "Debian `%s' 套件切割/重組工具﹔版本 %s。\n"

#: dpkg-split/main.c:68
#, c-format
msgid ""
"Commands:\n"
"  -s|--split <file> [<prefix>]     Split an archive.\n"
"  -j|--join <part> <part> ...      Join parts together.\n"
"  -I|--info <part> ...             Display info about a part.\n"
"  -a|--auto -o <complete> <part>   Auto-accumulate parts.\n"
"  -l|--listq                       List unmatched pieces.\n"
"  -d|--discard [<filename> ...]    Discard unmatched pieces.\n"
"\n"
msgstr ""
"指令：\n"
"  -s|--split <檔案> [<前綴>]       切割套件檔。\n"
"  -j|--join <分割檔> <分割檔> ...  結合分割檔。\n"
"  -I|--info <分割檔> ...           顯示某個分割檔的資訊。\n"
"  -a|--auto -o <結合檔> <分割檔>   自動結合分割檔。\n"
"  -l|--listq                       列出不相符的部份。\n"
"  -d|--discard [<檔名> ...]        捨棄不相符的部份。\n"
"\n"

#: dpkg-split/main.c:83
#, c-format
msgid ""
"Options:\n"
"  --depotdir <directory>           Use <directory> instead of %s/%s.\n"
"  -S|--partsize <size>             In KiB, for -s (default is 450).\n"
"  -o|--output <file>               Filename, for -j (default is\n"
"                                     <package>_<version>_<arch>.deb).\n"
"  -Q|--npquiet                     Be quiet when -a is not a part.\n"
"  --msdos                          Generate 8.3 filenames.\n"
"\n"
msgstr ""
"選項：\n"
"  --depotdir <目錄>                使用 <目錄> 代替 %s/%s。\n"
"  -S|--partsize <大小>             單位為 KiB，用於 -s。（預設為 450）\n"
"  -o|--output <檔案>               檔名，用於 -j。\n"
"                                   （預設為 <套件名>_<版本>_<硬體平台>."
"deb）\n"
"  -Q|--npquiet                     當 -a 不是分割檔時，不顯示訊息。\n"
"  --msdos                          產生 8.3 的檔名。\n"
"\n"

#: dpkg-split/main.c:93
#, c-format
msgid ""
"Exit status:\n"
"  0 = ok\n"
"  1 = with --auto, file is not a part\n"
"  2 = trouble\n"
msgstr ""
"結束狀態碼：\n"
"  0 = 正確\n"
"  1 = --auto 時，檔案不是分割檔\n"
"  2 = 錯誤\n"

#: dpkg-split/main.c:104
msgid "Type dpkg-split --help for help."
msgstr "輸入 dpkg-split --help 以取得說明。"

#: dpkg-split/main.c:115
#, c-format
msgid "unexpected end of file in %.250s"
msgstr "在 %.250s 中有預期之外的檔案結束符號"

#: dpkg-split/main.c:129
msgid "part size is far too large or is not positive"
msgstr "分割檔的大小已遠遠過長或非正數"

#: dpkg-split/main.c:133
#, c-format
msgid "part size must be at least %d KiB (to allow for header)"
msgstr "分割檔大小至少要有 %d KiB（以便儲存標頭資訊）"

#: dpkg-split/queue.c:95
#, c-format
msgid "unable to read depot directory `%.250s'"
msgstr "無法讀取暫存目錄 `%.250s'"

#: dpkg-split/queue.c:145
msgid "--auto requires the use of the --output option"
msgstr "--auto 需要與 --output 一同使用"

#: dpkg-split/queue.c:148
msgid "--auto requires exactly one part file argument"
msgstr "--auto 只需一個分割檔的名稱作為參數"

#: dpkg-split/queue.c:152
#, c-format
msgid "unable to read part file `%.250s'"
msgstr "無法讀取分割檔 `%.250s'"

#: dpkg-split/queue.c:155
#, c-format
msgid "File `%.250s' is not part of a multipart archive.\n"
msgstr "檔案 `%.250s' 並非套件檔中的一個分割檔。\n"

#: dpkg-split/queue.c:193
#, c-format
msgid "unable to reopen part file `%.250s'"
msgstr "無法重新開啟分割檔 `%.250s'"

#: dpkg-split/queue.c:196
#, c-format
msgid "unable to open new depot file `%.250s'"
msgstr "無法開啟新的暫存檔 `%.250s'"

#: dpkg-split/queue.c:199
#, c-format
msgid "cannot extract split package part '%s': %s"
msgstr "無法解壓縮套件分割 '%s'：%s"

#: dpkg-split/queue.c:208
#, c-format
msgid "unable to rename new depot file `%.250s' to `%.250s'"
msgstr "無法將新的暫存檔 `%.250s' 重新命名為 `%.250s'"

#: dpkg-split/queue.c:212
#, c-format
msgid "Part %d of package %s filed (still want "
msgstr "已收集 %d 個套件 %s 的分割檔（尚需 "

#: dpkg-split/queue.c:216
msgid " and "
msgstr " 和 "

#: dpkg-split/queue.c:230
#, c-format
msgid "unable to delete used-up depot file `%.250s'"
msgstr "無法刪除用畢的暫存檔 `%.250s'"

#: dpkg-split/queue.c:253
msgid "Junk files left around in the depot directory:\n"
msgstr "在暫存目錄中留下了一些多餘檔案：\n"

#: dpkg-split/queue.c:258 dpkg-split/queue.c:287
#, c-format
msgid "unable to stat `%.250s'"
msgstr "無法取得 `%.250s' 的檔案資訊"

#: dpkg-split/queue.c:261
#, c-format
msgid " %s (%jd bytes)\n"
msgstr " %s（%jd 位元組）\n"

#: dpkg-split/queue.c:263
#, c-format
msgid " %s (not a plain file)\n"
msgstr " %s（並非一般檔案）\n"

#: dpkg-split/queue.c:268
msgid "Packages not yet reassembled:\n"
msgstr "套件尚未結合完畢：\n"

#: dpkg-split/queue.c:276
#, c-format
msgid " Package %s: part(s) "
msgstr "套件 %s：分割"

#: dpkg-split/queue.c:289
#, c-format
msgid "part file `%.250s' is not a plain file"
msgstr "分割檔 `%.250s' 並非一般檔案"

#: dpkg-split/queue.c:296
#, c-format
msgid "(total %jd bytes)\n"
msgstr "（合計 %jd 位元組）\n"

#: dpkg-split/queue.c:329
#, c-format
msgid "unable to discard `%.250s'"
msgstr "無法忽略 `%.250s'"

#: dpkg-split/queue.c:330
#, c-format
msgid "Deleted %s.\n"
msgstr "已刪除 %s。\n"

#: dpkg-split/split.c:71 dpkg-split/split.c:84
msgid "package field value extraction"
msgstr "取得套件欄位值"

#: dpkg-split/split.c:78
#, c-format
msgid "cannot extract package field value from '%s': %s"
msgstr "無法由 '%s' 取得套件欄位值：%s"

#: dpkg-split/split.c:135
#, c-format
msgid "unable to open source file `%.250s'"
msgstr "無法開啟來源檔 `%.250s'"

#: dpkg-split/split.c:137
msgid "unable to fstat source file"
msgstr "無法 fstat 取得來源檔的檔案資訊"

#: dpkg-split/split.c:139
#, c-format
msgid "source file `%.250s' not a plain file"
msgstr "來源檔 `%.250s' 並非一般檔案"

#: dpkg-split/split.c:157
#, c-format
msgid "Splitting package %s into %d part: "
msgid_plural "Splitting package %s into %d parts: "
msgstr[0] "把套件 %s 分成 %d 個分割檔："

#: dpkg-split/split.c:197
msgid ""
"header is too long, making part too long; the package name or version\n"
"numbers must be extraordinarily long, or something; giving up"
msgstr ""
"檔頭太長，分段分太多。套件名稱或版本號碼\n"
"太長了之類的。放棄執行"

#: dpkg-split/split.c:253
msgid "--split needs a source filename argument"
msgstr "--split 需要一個來源檔作為參數"

#: dpkg-split/split.c:256
msgid "--split takes at most a source filename and destination prefix"
msgstr "--split 最多需要一個來源檔和目的路徑前綴做為參數"

#: utils/update-alternatives.c:96
#, c-format
msgid ""
"Commands:\n"
"  --install <link> <name> <path> <priority>\n"
"    [--slave <link> <name> <path>] ...\n"
"                           add a group of alternatives to the system.\n"
"  --remove <name> <path>   remove <path> from the <name> group alternative.\n"
"  --remove-all <name>      remove <name> group from the alternatives "
"system.\n"
"  --auto <name>            switch the master link <name> to automatic mode.\n"
"  --display <name>         display information about the <name> group.\n"
"  --query <name>           machine parseable version of --display <name>.\n"
"  --list <name>            display all targets of the <name> group.\n"
"  --get-selections         list master alternative names and their status.\n"
"  --set-selections         read alternative status from standard input.\n"
"  --config <name>          show alternatives for the <name> group and ask "
"the\n"
"                           user to select which one to use.\n"
"  --set <name> <path>      set <path> as alternative for <name>.\n"
"  --all                    call --config on all alternatives.\n"
"\n"
msgstr ""
"指令:\n"
"  --install <連結> <名稱> <路徑> <優先等級>\n"
"    [--slave <連結> <名稱> <路徑>] ...\n"
"                             新增一組替換指令到系統中。\n"
"  --remove <名稱> <路徑>     從 <名稱> 替換群組中移除 <路徑>。\n"
"  --remove-all <名稱>        由替換系統裡移除 <名稱> 群組。\n"
"  --auto <名稱>              將 <名稱> 主要連結切換為自動模式。\n"
"  --display <名稱>           顯示 <名稱> 群組的資訊。\n"
"  --query <名稱>             --display <名稱> 供程式讀取的輸出版本\n"
"  --list <名稱>              顯示所有 <名稱> 群組指向的程式。\n"
"  --get-selections           列出主要替換名稱及狀態。\n"
"  --set-selections           由標準輸入讀取替換狀態。\n"
"  --config <名稱>            顯示 <名稱> 群組的替換指令，\n"
"                             並讓使用者選擇要用哪一個。\n"
"  --set <名稱> <路徑>        將 <路徑> 加入 <名稱> 可替換指令。\n"
"  --all                      在所有的可替換指令上呼叫 --config。\n"
"\n"

#: utils/update-alternatives.c:115
#, c-format
msgid ""
"<link> is the symlink pointing to %s/<name>.\n"
"  (e.g. /usr/bin/pager)\n"
"<name> is the master name for this link group.\n"
"  (e.g. pager)\n"
"<path> is the location of one of the alternative target files.\n"
"  (e.g. /usr/bin/less)\n"
"<priority> is an integer; options with higher numbers have higher priority "
"in\n"
"  automatic mode.\n"
"\n"
msgstr ""
"<連結> 是指向 %s/<名稱> 的符號連結。\n"
"（例如 /usr/bin/pager）\n"
"<名稱> 是這個連結群組的主要名稱。\n"
"（例如 pager）\n"
"<路徑> 是某個可替換指令所指向的檔案位置。\n"
"（例如 /usr/bin/less）\n"
"<優先等級> 是整數，在自動模式下，數字越高越優先。\n"
"\n"

#: utils/update-alternatives.c:126
#, c-format
msgid ""
"Options:\n"
"  --altdir <directory>     change the alternatives directory.\n"
"  --admindir <directory>   change the administrative directory.\n"
"  --log <file>             change the log file.\n"
"  --force                  allow replacing files with alternative links.\n"
"  --skip-auto              skip prompt for alternatives correctly "
"configured\n"
"                           in automatic mode (relevant for --config only)\n"
"  --verbose                verbose operation, more output.\n"
"  --quiet                  quiet operation, minimal output.\n"
"  --help                   show this help message.\n"
"  --version                show the version.\n"
msgstr ""
"選項：\n"
"  --altdir <目錄>          變更替換檔設定目錄。\n"
"  --admindir <目錄>        變更管理目錄\n"
"  --log <檔案>             變更記錄檔。\n"
"  --force                  允許以替換連結取代檔案。\n"
"  --skip-auto              若替換檔處於自動模式，則不再詢問。\n"
"                           （只和 --config 有關）\n"
"  --verbose                詳盡的操作過程，會輸出更多的資訊。\n"
"  --quiet                  安靜模式，儘量不顯示訊息。\n"
"  --help                   顯示這個說明訊息。\n"
"  --version                顯示版本資訊。\n"

#: utils/update-alternatives.c:145 utils/update-alternatives.c:158
msgid "error"
msgstr "錯誤"

#: utils/update-alternatives.c:176
#, fuzzy, c-format
#| msgid "Use --help for help about overriding file stat information."
msgid "Use '%s --help' for program usage information."
msgstr "請用 --help，參閱忽略檔案資訊的說明。"

#: utils/update-alternatives.c:190
msgid "warning"
msgstr "警告"

#: utils/update-alternatives.c:259
#, c-format
msgid "malloc failed (%zu bytes)"
msgstr "malloc 失敗（%zu 位元組）"

#: utils/update-alternatives.c:353
#, c-format
msgid "two commands specified: --%s and --%s"
msgstr "指定了兩個指令：--%s 以及 --%s"

#: utils/update-alternatives.c:385
#, c-format
msgid "cannot append to '%s'"
msgstr "無法加到 '%s'"

#: utils/update-alternatives.c:500
#, c-format
msgid "unable to remove '%s'"
msgstr "無法刪除 '%s'"

#: utils/update-alternatives.c:1004
msgid "auto mode"
msgstr "自動模式"

#: utils/update-alternatives.c:1004
msgid "manual mode"
msgstr "手動模式"

#: utils/update-alternatives.c:1128
#, c-format
msgid "unexpected end of file while trying to read %s"
msgstr "讀取 %s 時檔案意外結束"

#: utils/update-alternatives.c:1130
#, c-format
msgid "while reading %s: %s"
msgstr "正在讀取 %s：%s"

#: utils/update-alternatives.c:1136
#, c-format
msgid "line not terminated while trying to read %s"
msgstr "讀取 %s 時，行沒有結束"

#: utils/update-alternatives.c:1154
#, c-format
msgid "%s corrupt: %s"
msgstr "%s 損毀：%s"

#: utils/update-alternatives.c:1167
#, c-format
msgid "newlines prohibited in update-alternatives files (%s)"
msgstr "在 update-alternatives 檔 (%s) 裡不可有換行符號"

#: utils/update-alternatives.c:1180
msgid "slave name"
msgstr "次要項目名稱"

#: utils/update-alternatives.c:1188 utils/update-alternatives.c:2621
#, c-format
msgid "duplicate slave name %s"
msgstr "次要項目 %s 名稱重複"

#: utils/update-alternatives.c:1191
msgid "slave link"
msgstr "次要項目連結 %s"

#: utils/update-alternatives.c:1195
#, c-format
msgid "slave link same as main link %s"
msgstr "次要項目連結與主連結 %s 相同"

#: utils/update-alternatives.c:1202 utils/update-alternatives.c:2628
#, c-format
msgid "duplicate slave link %s"
msgstr "次要項目 %s 連結重複"

#: utils/update-alternatives.c:1220
msgid "master file"
msgstr "主檔案"

#: utils/update-alternatives.c:1228
#, c-format
msgid "duplicate path %s"
msgstr "重複的路徑 %s"

#: utils/update-alternatives.c:1238
#, c-format
msgid ""
"alternative %s (part of link group %s) doesn't exist; removing from list of "
"alternatives"
msgstr "找不到 %2$s 連結群組的替換項目 %1$s 的替換項目；由替換清單中移除"

#: utils/update-alternatives.c:1241 utils/update-alternatives.c:1252
msgid "priority"
msgstr "優先權"

#: utils/update-alternatives.c:1244 utils/update-alternatives.c:1266
msgid "slave file"
msgstr "次要項目檔案"

#: utils/update-alternatives.c:1257
#, c-format
msgid "priority of %s: %s"
msgstr "%s 的優先權：%s"

#: utils/update-alternatives.c:1261
#, c-format
msgid "priority of %s is out of range: %s"
msgstr "%s 的優先權超出範圍：%s"

#: utils/update-alternatives.c:1315
msgid "status"
msgstr "狀態"

#: utils/update-alternatives.c:1317
msgid "invalid status"
msgstr "狀態無效"

#: utils/update-alternatives.c:1322
msgid "master link"
msgstr "主連結"

#: utils/update-alternatives.c:1366
#, c-format
msgid "discarding obsolete slave link %s (%s)"
msgstr "捨棄作廢的次要項目連結 %s (%s)"

#: utils/update-alternatives.c:1422
#, c-format
msgid "unable to flush file '%s'"
msgstr "無法清除檔案 '%s' 的寫入緩衝"

#: utils/update-alternatives.c:1537
#, c-format
msgid "  link currently points to %s"
msgstr "  目前連結指向 %s"

#: utils/update-alternatives.c:1539
msgid "  link currently absent"
msgstr "  目前連結失效"

#: utils/update-alternatives.c:1543
#, c-format
msgid "%s - priority %d"
msgstr "%s - 優先權 %d"

#: utils/update-alternatives.c:1546
#, c-format
msgid "  slave %s: %s"
msgstr "  次要項目 %s：%s"

#: utils/update-alternatives.c:1553
#, c-format
msgid "Current 'best' version is '%s'."
msgstr "目前 '最佳' 的版本為 '%s'。"

#: utils/update-alternatives.c:1555
msgid "No versions available."
msgstr "沒有可用的版本。"

#: utils/update-alternatives.c:1603
#, c-format
msgid "There is %d choice for the alternative %s (providing %s)."
msgid_plural "There are %d choices for the alternative %s (providing %s)."
msgstr[0] "替代項目 %2$s（提供 %3$s）有 %1$d 個選擇。"

#: utils/update-alternatives.c:1608
msgid "Selection"
msgstr "選項"

#: utils/update-alternatives.c:1609
msgid "Path"
msgstr "路徑"

#: utils/update-alternatives.c:1609
msgid "Priority"
msgstr "優先權"

#: utils/update-alternatives.c:1609
msgid "Status"
msgstr "狀態"

#: utils/update-alternatives.c:1616
#, c-format
msgid "Press enter to keep the current choice[*], or type selection number: "
msgstr "按 [enter] 保留目前選項 [*]，或輸入選項編號："

#: utils/update-alternatives.c:1765
#, c-format
msgid "not replacing %s with a link"
msgstr "不會把 %s 換成連結"

#: utils/update-alternatives.c:1806
#, c-format
msgid "can't install unknown choice %s"
msgstr "無法安裝未知的選項 %s"

#: utils/update-alternatives.c:1824
#, c-format
msgid ""
"skip creation of %s because associated file %s (of link group %s) doesn't "
"exist"
msgstr "找不到連結群組 %3$s 中相對的檔案 %2$s ，略過 %1$s"

#: utils/update-alternatives.c:1834
#, c-format
msgid "not removing %s since it's not a symlink"
msgstr "%s 不是符號連結，不會刪除"

#: utils/update-alternatives.c:2122 utils/update-alternatives.c:2128
#, c-format
msgid "Call %s."
msgstr "呼叫 %s。"

#: utils/update-alternatives.c:2132
#, c-format
msgid "Alternative %s unchanged because choice %s is not available."
msgstr "選項 %s 不能用，替代項目 %s 不變。"

#: utils/update-alternatives.c:2136
#, c-format
msgid "Skip unknown alternative %s."
msgstr "略過未知的替代項目 %s。"

#: utils/update-alternatives.c:2163
#, c-format
msgid "line too long or not terminated while trying to read %s"
msgstr "讀取 %s 時，行太長或沒有結束"

#: utils/update-alternatives.c:2176 utils/update-alternatives.c:2189
#: utils/update-alternatives.c:2199
#, c-format
msgid "Skip invalid line: %s"
msgstr "忽略無效的行：%s"

#: utils/update-alternatives.c:2224
#, c-format
msgid "%s/%s is dangling; it will be updated with best choice"
msgstr "%s/%s 懸空，改指向最佳選項"

#: utils/update-alternatives.c:2228
#, c-format
msgid ""
"%s/%s has been changed (manually or by a script); switching to manual "
"updates only"
msgstr "%s/%s 已異動（手動或 script 修改）。切換為僅手動更新"

#: utils/update-alternatives.c:2236
#, c-format
msgid "setting up automatic selection of %s"
msgstr "設定 %s 的自動選擇"

#: utils/update-alternatives.c:2275
#, c-format
msgid "renaming %s slave link from %s to %s"
msgstr "%s 的次要連結，由 %s 重新命名為 %s"

#: utils/update-alternatives.c:2296
#, c-format
msgid "renaming %s link from %s to %s"
msgstr "%s 的連結，由 %s 重新命名為 %s"

#: utils/update-alternatives.c:2332
#, c-format
msgid "using %s to provide %s (%s) in %s"
msgstr "以 %1$s 提供 %4$s 中的 %2$s (%3$s)"

#: utils/update-alternatives.c:2341
#, fuzzy, c-format
#| msgid ""
#| "forcing reinstallation of alternative %s because link group %s is broken"
msgid "updating alternative %s because link group %s has changed slave links"
msgstr "連結群組 %2$s 損壞，強制重新安裝替換項目 %1$s"

#: utils/update-alternatives.c:2346
#, c-format
msgid ""
"forcing reinstallation of alternative %s because link group %s is broken"
msgstr "連結群組 %2$s 損壞，強制重新安裝替換項目 %1$s"

#: utils/update-alternatives.c:2354
#, c-format
msgid "current alternative %s is unknown, switching to %s for link group %s"
msgstr "%1$s 的替換項目不明，切換為 %3$s 連結群組的 %2$s"

#: utils/update-alternatives.c:2380
#, c-format
msgid "alternative name (%s) must not contain '/' and spaces"
msgstr "替換名稱 (%s) 不可包含 '/' 及空白"

#: utils/update-alternatives.c:2388
#, c-format
msgid "alternative link is not absolute as it should be: %s"
msgstr "替換連結路徑不是絕對路徑，應為絕對路徑：%s"

#: utils/update-alternatives.c:2396
#, c-format
msgid "alternative path is not absolute as it should be: %s"
msgstr "替換項目路徑不是絕對路徑，應為絕對路徑：%s"

#: utils/update-alternatives.c:2427
#, c-format
msgid "alternative %s can't be master: it is a slave of %s"
msgstr "替換項目 %s 是 %s 的次要項目，無法設為主項目"

#: utils/update-alternatives.c:2435 utils/update-alternatives.c:2471
#, c-format
msgid "alternative link %s is already managed by %s"
msgstr "替換項目 %s 已由 %s 管理"

#: utils/update-alternatives.c:2441
#, c-format
msgid "alternative path %s doesn't exist"
msgstr "找不到替代路徑 %s"

#: utils/update-alternatives.c:2458
#, c-format
msgid "alternative %s can't be slave of %s: it is a master alternative"
msgstr "替換項目 %s 不可以是 %s 的子項目：它是主要替換項目"

#: utils/update-alternatives.c:2462
#, c-format
msgid "alternative %s can't be slave of %s: it is a slave of %s"
msgstr "替換項目 %1$s 是 %3$s 的次要項目，無法設為 %2$s 的次要項目"

#: utils/update-alternatives.c:2482
#, c-format
msgid "alternative link %s is already managed by %s (slave of %s)"
msgstr "替換項目 %1$s 已由 %3$s 的次要項目 %2$s 管理"

#: utils/update-alternatives.c:2527
#, c-format
msgid "unknown argument `%s'"
msgstr "未知參數 `%s'"

#: utils/update-alternatives.c:2546
msgid "--install needs <link> <name> <path> <priority>"
msgstr "--install 要有 <連結> <名稱> <路徑> <優先權>"

#: utils/update-alternatives.c:2552 utils/update-alternatives.c:2613
msgid "<link> and <path> can't be the same"
msgstr "<連結> 和 <路徑> 不可相同"

#: utils/update-alternatives.c:2556
msgid "priority must be an integer"
msgstr "優先權必須為整數"

#: utils/update-alternatives.c:2558
#, fuzzy
#| msgid "priority of %s is out of range: %s"
msgid "priority is out of range"
msgstr "%s 的優先權超出範圍：%s"

#: utils/update-alternatives.c:2571
#, c-format
msgid "--%s needs <name> <path>"
msgstr "--%s 要有 <名稱> <路徑>"

#: utils/update-alternatives.c:2588
#, c-format
msgid "--%s needs <name>"
msgstr "--%s 要有 <名稱>"

#: utils/update-alternatives.c:2604
msgid "--slave only allowed with --install"
msgstr "--slave 只能搭配 --install 使用"

#: utils/update-alternatives.c:2606
msgid "--slave needs <link> <name> <path>"
msgstr "--slave 要有 <連結> <名稱> <路徑>"

#: utils/update-alternatives.c:2615
#, c-format
msgid "name %s is both primary and slave"
msgstr "名稱 %s 同時是主要及次要"

#: utils/update-alternatives.c:2618
#, c-format
msgid "link %s is both primary and slave"
msgstr "連結 %s 同時是主要及次要"

#: utils/update-alternatives.c:2638
#, c-format
msgid "--%s needs a <file> argument"
msgstr "--%s 需要 <檔案> 參數"

#: utils/update-alternatives.c:2664
#, c-format
msgid "unknown option `%s'"
msgstr "未知選項 `%s'"

#: utils/update-alternatives.c:2669
msgid ""
"need --display, --query, --list, --get-selections, --config, --set, --set-"
"selections, --install, --remove, --all, --remove-all or --auto"
msgstr ""
"要加上 --display、--query、--list、--get-selections、--config、--set、--set-"
"selections、--install、--remove、--all、--remove-all 或 --auto"

#: utils/update-alternatives.c:2685 utils/update-alternatives.c:2691
#, c-format
msgid "no alternatives for %s"
msgstr "沒有 %s 的替換檔"

#: utils/update-alternatives.c:2708
msgid "<standard input>"
msgstr "<標準輸入>"

#: utils/update-alternatives.c:2730
#, c-format
msgid "alternative %s for %s not registered; not setting"
msgstr "%2$s 的替換項目 %1$s 沒有註冊，無可設定"

#: utils/update-alternatives.c:2736 utils/update-alternatives.c:2742
#, c-format
msgid "There is no program which provides %s."
msgstr "沒有程式有提供 %s。"

#: utils/update-alternatives.c:2744 utils/update-alternatives.c:2752
msgid "Nothing to configure."
msgstr "無可設定。"

#: utils/update-alternatives.c:2750
#, c-format
msgid "There is only one alternative in link group %s (providing %s): %s"
msgstr "替換群組 %s（提供 %s）只有一個替換項目：%s"

#: utils/update-alternatives.c:2760
#, c-format
msgid "alternative %s for %s not registered; not removing"
msgstr "%2$s 的替換項目 %1$s 未註冊，不加刪除"

#: utils/update-alternatives.c:2768
#, c-format
msgid "removing manually selected alternative - switching %s to auto mode"
msgstr "移除手選的替代項目 - 將 %s 切為自動模式"

#: utils/update-alternatives.c:2793
#, c-format
msgid "automatic updates of %s/%s are disabled; leaving it alone"
msgstr "%s/%s 的自動更新已停用，不做異動"

#: utils/update-alternatives.c:2795
#, c-format
msgid "to return to automatic updates use '%s --auto %s'"
msgstr "若要回復成自動更新，請執行 '%s --auto %s'"

#~ msgid " (actually `%s')"
#~ msgstr "（實際上是 `%s'）"

#~ msgid "value for `config-version' field not allowed in this context"
#~ msgstr "在此不能使用這個 `config-version' 欄位的值"

#~ msgid "error in Config-Version string '%.250s'"
#~ msgstr "Config-Version 字串 '%.250s' 有誤"

#~ msgid "value for `triggers-pending' field not allowed in this context"
#~ msgstr "`triggers-pending' 欄位所設定的值不能用在這個地方"

#~ msgid "value for `triggers-awaited' field not allowed in this context"
#~ msgstr "`triggers-awaited' 欄位所設定的值不能用在這個地方"

#~ msgid "failed to fstat previous diversions file"
#~ msgstr "無法 fstat 取得原有的移轉檔的檔案資訊"

#~ msgid "failed to fstat previous statoverride file"
#~ msgstr "無法 fstat 原有的 statoverride 檔"

#~ msgid "package %s has too many Conflicts/Replaces pairs"
#~ msgstr "套件 %s 有太多的 衝突／替換 組合"

#~ msgid "Unpacking replacement %.250s ...\n"
#~ msgstr "解開替代套件 %.250s ...\n"

#~ msgid "invalid integer for -%c: '%.250s'"
#~ msgstr "-%c 的整數無效：'%.250s'"

#~ msgid "priority is out of range: %s clamped to %ld"
#~ msgstr "優先權超出範圍：由 %s 調整為 %ld"