15191 Convert sharemgr(8) to mandoc

Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: Gordon Ross <gordon.w.ross@gmail.com>
Approved by: Dan McDonald <danmcd@mnx.io>

1 files changed, 1134 insertions, 1185 deletions

diff --git a/usr/src/man/man8/sharemgr.8 b/usr/src/man/man8/sharemgr.8
index ba49873211..2d66095c23 100644
--- a/usr/src/man/man8/sharemgr.8
+++ b/usr/src/man/man8/sharemgr.8
@@ -1,793 +1,835 @@
-'\" te
 .\" Copyright (c) 2008, Sun Microsystems, Inc. All Rights Reserved
 .\" Copyright 2016 Nexenta Systems, Inc.  All rights reserved.
-.\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License. You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.
-.\"  See the License for the specific language governing permissions and limitations under the License. When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with
-.\" the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH SHAREMGR 8 "November 22, 2021"
-.SH NAME
-sharemgr \- configure and manage file sharing
-.SH SYNOPSIS
-.nf
-\fBsharemgr\fR \fIsubcommand\fR [\fIoptions\fR]
-.fi
-
-.LP
-.nf
-\fBadd-share\fR [\fB-nth\fR] [\fB-r\fR \fIresource-name\fR] [\fB-d\fR "\fIdescription text\fR"]
- \fB-s\fR \fIsharepath\fR \fIgroup\fR
-.fi
-
-.LP
-.nf
-\fBcreate\fR [\fB-nvh\fR] [\fB-P\fR \fIproto\fR [\fB-p\fR \fIproperty\fR=\fIvalue\fR]] \fIgroup\fR
-.fi
-
-.LP
-.nf
-\fBdelete\fR [\fB-nvh\fR] [\fB-P\fR \fIproto\fR] [\fB-f\fR] \fIgroup\fR
-.fi
-
-.LP
-.nf
-\fBdisable\fR [\fB-nvh\fR] [\fB-a\fR | \fIgroup\fR...]
-.fi
-
-.LP
-.nf
-\fBenable\fR [\fB-nvh\fR] [\fB-a\fR | \fIgroup\fR...]
-.fi
-
-.LP
-.nf
-\fBlist\fR [\fB-vh\fR] [\fB-P\fR \fIproto\fR]
-.fi
-
-.LP
-.nf
-\fBmove-share\fR [\fB-nv\fR] \fB-s\fR \fIsharepath\fR \fIdestination-group\fR
-.fi
-
-.LP
-.nf
-\fBremove-share\fR [\fB-fnvh\fR] \fB-s\fR \fIsharepath\fR \fIgroup\fR
-.fi
-
-.LP
-.nf
-\fBset\fR [\fB-nvh\fR] \fB-P\fR \fIproto\fR [\fB-p\fR \fIproperty\fR=\fIvalue\fR]... [\fB-S\fR \fIoptionset\fR]
- [\fB-s\fR \fIsharepath\fR] \fIgroup\fR
-.fi
-
-.LP
-.nf
-\fBset-share\fR [\fB-nh\fR] [\fB-r\fR \fIresource\fR] [\fB-d\fR "\fIdescription text\fR"]
- \fB-s\fR \fIsharepath\fR \fIgroup\fR
-.fi
-
-.LP
-.nf
-\fBshow\fR [\fB-pvxh\fR] [\fB-P\fR \fIproto\fR] [\fIgroup\fR]...
-.fi
-
-.LP
-.nf
-\fBunset\fR [\fB-nvh\fR] \fB-P\fR \fIproto\fR [\fB-S\fR \fIoptionset\fR] [\fB-p\fR \fIproperty\fR]...
- \fIgroup\fR
-.fi
-
-.LP
-.nf
-\fBshare\fR [\fB-F\fR \fIfstype\fR] [\fB-p\fR] [\fB-o\fR \fIoptionlist\fR] [\fB-d\fR \fIdescription\fR]
- [\fIpathname\fR [\fIresourcename\fR]]
-.fi
-
-.LP
-.nf
-\fBunshare\fR [\fB-F\fR \fIfstype\fR] [\fB-p\fR] [\fB-o\fR \fIoptionlist\fR] \fIsharepath\fR
-.fi
-
-.SH DESCRIPTION
-The \fBsharemgr\fR command configures share groups and the shares contained
-within them.
-.sp
-.LP
-A group name must conform to service management facility (SMF) (see
-\fBsmf\fR(7)) service-naming conventions, thus is limited to starting with an
+.\" Copyright 2022 Jason King
+.\"
+.\" The contents of this file are subject to the terms of the
+.\" Common Development and Distribution License (the "License").
+.\" You may not use this file except in compliance with the License.
+.\"
+.\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+.\" or http://www.opensolaris.org/os/licensing.
+.\" See the License for the specific language governing permissions
+.\" and limitations under the License.
+.\"
+.\" When distributing Covered Code, include this CDDL HEADER in each
+.\" file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+.\" If applicable, add the following below this CDDL HEADER, with the
+.\" fields enclosed by brackets "[]" replaced with your own identifying
+.\" information: Portions Copyright [yyyy] [name of copyright owner]
+.\"
+.Dd October 10, 2022
+.Dt SHAREMGR 8
+.Os
+.Sh NAME
+.Nm sharemgr
+.Nd configure and manage file sharing
+.Sh SYNOPSIS
+.Nm Cm subcommand Op options
+.Nm Cm add-share \
+    Oo Fl nth Oc \
+    Oo Fl r Ar resource-name Oc \
+    Oo Fl d Ar \(dqdescription\0text\(dq Oc
+.Nm Cm create \
+    Oo Fl nvh Oc \
+    Oo Fl P Ar proto \
+        Oo Fl p Ar property Ns = Ns Ar value Oc \
+    Oc \
+    Ar group
+.Nm Cm delete \
+    Oo Fl nvh Oc \
+    Oo Fl P Ar proto Oc \
+    Oo Fl f Oc \
+    Ar group
+.Nm Cm disable \
+    Oo Fl nvh Oc \
+    Oo Fl a | Ar group Ns ... Oc
+.Nm Cm enable \
+    Oo Fl nvh Oc \
+    Oo Fl a | Ar group Ns ... Oc
+.Nm Cm list \
+    Oo Fl vh Oc \
+    Oo Fl P Ar proto Oc
+.Nm Cm move-share \
+    Oo Fl nv Oc \
+    Fl s Ar sharepath Ar destination-group
+.Nm Cm remove-share \
+    Oo Fl fnvh Oc \
+    Fl s Ar sharepath Ar group
+.Nm Cm set \
+    Oo Fl nvh Oc \
+    Fl P Ar proto \
+    Oo Fl p Ar property Ns = Ns Ar Value Oc Ns ... \
+    Oo Fl S Ar optionset Oc \
+    Oo Fl s Ar sharepath Oc \
+    Ar group
+.Nm Cm set-share \
+    Oo Fl nh Oc \
+    Oo Fl r Ar resource Oc \
+    Oo Fl d Ar \(dqdescription\0text\(dq Oc \
+    Fl s Ar sharepath \
+    Ar group
+.Nm Cm show \
+    Oo Fl pvxh Oc \
+    Oo Fl P Ar proto Oc \
+    Oo Ar group Ns ... Oc
+.Nm Cm unset \
+    Oo Fl nvh Oc \
+    Fl P Ar proto \
+    Oo Fl S Ar optionset Oc \
+    Oo Fl p Ar property Oc Ns ... \
+    Ar group
+.Nm Cm share \
+    Oo Fl F Ar fstype Oc \
+    Oo Fl p Oc \
+    Oo Fl o Ar optionlist Oc \
+    Oo Fl d Ar description Oc \
+    Oo Ar pathname Oo Ar resourcename Oc Oc
+.Nm Cm unshare \
+    Oo Fl F Ar fstype Oc \
+    Oo Fl p Oc \
+    Oo Fl o Ar optionlist Oc \
+    Ar sharepath
+.Sh DESCRIPTION
+The
+.Nm
+command configures share groups and the shares contained within them.
+.Pp
+A group name must conform to service management facility (SMF)
+.Po
+see
+.Xr smf 7
+.Pc
+service-naming conventions, thus is limited to starting with an
 alphabetic character, with the rest of the name consisting only of alphanumeric
-characters plus \fB-\fR (hyphen) and \fB_\fR (underbar).
-.sp
-.LP
+characters plus
+.Ql \(hy
+(hyphen) and
+.Ql \(ru
+(underbar).
+.Pp
 Subcommands that result in a configuration change support a dry-run option.
-When dry-run (\fB-n\fR) is specified, the syntax and validity of the command is
+When dry-run
+.Pq Fl n
+is specified, the syntax and validity of the command is
 tested but the configuration is not actually updated.
-.sp
-.LP
-For all subcommands, the \fB-h\fR option lists usage and help information.
-.sp
-.LP
-For subcommands with the verbose (\fB-v\fR) option, additional information will
-be provided. For example, in conjunction with the \fB-n\fR option, verbose mode
-will also indicate whether the current user has sufficient permissions to
-accomplish the operation.
-.sp
-.LP
-There are two groups that are created automatically. The \fBdefault\fR group
-always exists and covers legacy NFS shares only. The \fBzfs\fR group will be
-created when ZFS shares are enabled.
-.sp
-.LP
-The options shown in the SYNOPSIS section are described in the context of each
-subcommand. All subcommands except \fBlist\fR and \fBshow\fR require root
-privileges or that you assume the Primary Administrator role.
-.SS "Subcommands"
-With no subcommand entered, a \fBsharemgr\fR command with the \fB-h\fR option
-displays a usage message for all subcommands.
-.sp
-.LP
-The following subcommands follow \fBsharemgr\fR on a command line. Commands
-take the form:
-.sp
-.in +2
-.nf
+.Pp
+For all subcommands, the
+.Fl h
+option lists usage and help information.
+.Pp
+For subcommands with the verbose
+.Pq Fl v
+option, additional information will be provided.
+For example, in conjunction with the
+.Fl n
+option, verbose mode will also indicate whether the current user has
+sufficient permissions to accomplish the operation.
+.Pp
+There are two groups that are created automatically.
+The
+.Sy default
+group always exists and covers legacy NFS shares only.
+The
+.Sy zfs
+group will be created when ZFS shares are enabled.
+.Pp
+The options shown in the
+.Sx SYNOPSIS
+section are described in the context of each subcommand.
+All subcommands except
+.Cm list
+and
+.Cm show
+require root privileges or that you assume the Primary Administrator role.
+.Ss "Subcommands"
+With no subcommand entered, a
+.Nm
+command with the
+.Fl h
+option displays a usage message for all subcommands.
+.Pp
+The following subcommands follow
+.Nm
+on a command line.
+Commands take the form:
+.Bd -literal -offset 2n
 % \fBsharemgr \fI<subcommand>\fR [\fIoptions\fR]\fR
-.fi
-.in -2
-.sp
-
-.sp
-.ne 2
-.na
-\fB\fBcreate\fR \fB[-nvh] [-P \fIproto\fR [-p \fIproperty\fR=\fIvalue\fR]]
-\fIgroup\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
+.Ed
+.Bl -tag -width "1"
+.It Cm create \
+    Oo Fl nvh Oc \
+    Oo Fl P Ar proto Oo \
+        Fl p Ar property Ns = Ns Ar value \
+    Oc Oc \
+    Ar group
+.Pp
 Create a new group with specified name.
-.sp
-If \fB-n\fR is specified, the command checks only the validity of the command
+.Pp
+If
+.Fl n
+is specified, the command checks only the validity of the command
 and that the group does not already exist.
-.sp
+.Pp
 If no protocol is specified, all known protocols are enabled for the specified
-group. If a protocol is specified, only that protocol is enabled. You can
-specify properties for a specified protocol.
-.sp
-If \fIgroup\fR exists, use of \fB-P\fR adds the specified protocol to that
 group.
-.sp
-As an example of the \fBcreate\fR subcommand, the following command creates a
-new group with the name \fBmygroup\fR.
-.sp
-.in +2
-.nf
+If a protocol is specified, only that protocol is enabled.
+You can specify properties for a specified protocol.
+.Pp
+If
+.Ar group
+exists, use of
+.Fl P
+adds the specified protocol to that group.
+.Pp
+As an example of the
+.Cm create
+subcommand, the following command creates a new group with the name
+.Ar mygroup .
+.Bd -literal -offset 2n
 # \fBsharemgr create mygroup\fR
-.fi
-.in -2
-.sp
-
+.Ed
+.Pp
 Because no protocol was specified in the preceding command, all defined
 protocols will be enabled on the group.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBdelete\fR \fB[-nvh] [-P \fIproto\fR] [-f] \fIgroup\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
-Delete the specified group. If the group is not empty, you can use the \fB-f\fR
+.It Cm delete \
+    Oo Fl nvh Oc \
+    Oo Fl P Ar proto Oc \
+    Oo Fl f Oc \
+    Ar group
+.Pp
+Delete the specified group.
+If the group is not empty, you can use the
+.Fl f
 option to force the deletion, which unshares and removes all shares from the
 group before removing the group itself.
-.sp
+.Pp
 If you specify a protocol, rather than deleting the whole group, this
 subcommand deletes the protocol from the group.
-.sp
-The \fB-n\fR option can be used to test the syntax of the command.
-.sp
-As an example, the following command removes the group \fBmygroup\fR from the
-configuration if it is empty.
-.sp
-.in +2
-.nf
+.Pp
+The
+.Fl n
+option can be used to test the syntax of the command.
+.Pp
+As an example, the following command removes the group
+.Ar mygroup
+from the configuration if it is empty.
+.Bd -literal -offset 2n
 # \fBsharemgr delete mygroup\fR
-.fi
-.in -2
-.sp
-
+.Ed
+.Pp
 The following command removes any existing shares prior to removing the group.
-.sp
-.in +2
-.nf
+.Bd -literal -offset 2n
 # \fBsharemgr delete -f mygroup\fR
-.fi
-.in -2
-.sp
-
-Note the use of the force (\fB-f\fR) option, above.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBlist\fR \fB[-vh] [-P \fIproto\fR]\fR\fR
-.ad
-.sp .6
-.RS 4n
+.Ed
+.Pp
+Note the use of the force
+.Pq Fl f
+option, above.
+.It Cm list \
+    Oo Fl vh Oc \
+    Oo Fl P Ar proto Oc
+.Pp
 List the defined groups.
-.sp
+.Pp
 If a protocol is specified, list only those groups that have the specified
 protocol defined.
-.sp
+.Pp
 If the verbose option is specified, the current state of the group and all
-protocols enabled on the group are listed as well. For example:
-.sp
-.in +2
-.nf
+protocols enabled on the group are listed as well.
+For example:
+.Bd -literal -offset 2n
 # \fBsharemgr list -v\fR
 mygroup    enabled    nfs
 rdonlygrp  disabled   nfs
-.fi
-.in -2
-.sp
-
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBshow\fR \fB[-pvxh] [-P \fIproto\fR] [\fIgroup\fR...]\fR\fR
-.ad
-.sp .6
-.RS 4n
+.Ed
+.It Cm show \
+    Oo Fl pvxh Oc \
+    Oo Fl P Ar proto Oc \
+    Oo Ar group Ns ... Oc
+.Pp
 Shows the contents of the specified group(s).
-.sp
+.Pp
 If the verbose option is specified, the resource name and description of each
-share is displayed if they are defined. Otherwise, only the share paths are
-displayed. Also, when temporary shares are listed, they are prefixed with an
-asterisk (\fB*\fR).
-.sp
-If the \fB-p\fR option is specified, all options defined for the protocols of
-the group are displayed, in addition to the display without options. If the
-\fB-P\fR option is used, the output is limited to those groups that have the
-specified protocol enabled. If the \fB-x\fR option is specified, output is in
-XML format and the \fB-p\fR and \fB-v\fR options are ignored, because all
-information is included in the XML.
-.sp
-The following example illustrates the use of the \fB-p\fR option.
-.sp
-.in +2
-.nf
+share is displayed if they are defined.
+Otherwise, only the share paths are
+displayed.
+Also, when temporary shares are listed, they are prefixed with an asterisk
+.Pq Ql * .
+.Pp
+If the
+.Fl p
+option is specified, all options defined for the protocols of
+the group are displayed, in addition to the display without options.
+If the
+.Fl P
+option is used, the output is limited to those groups that have the
+specified protocol enabled.
+If the
+.Fl x
+option is specified, output is in XML format and the
+.Fl p
+and
+.Fl v
+options are ignored, because all information is included in the XML.
+.Pp
+The following example illustrates the use of the
+.Fl p
+option.
+.Bd -literal -offset 2n
 # \fBsharemgr show -p mygroup\fR
 default nfs=()
     * /data/backup
 mygroup nfs=(nosuid=true)
       /export/home/home0
       /export/home/home1
-.fi
-.in -2
-.sp
-
-The following example illustrates the use of the \fB-v\fR option.
-.sp
-.in +2
-.nf
+.Ed
+.Pp
+The following example illustrates the use of the
+.Fl v
+option.
+.Bd -literal -offset 2n
 # \fBsharemgr show -v mygroup\fR
 mygroup
     HOME0=/export/home/home0    "Home directory set 0"
     HOME1=/export/home/home1    "Home directory set 1"
-.fi
-.in -2
-.sp
-
+.Ed
+.Pp
 ZFS managed shares are handled in a way similar to the way NFS shares are
-handled. These shares appear as subgroups within the parent group \fBzfs\fR.
-The subgroups are always prefixed with \fBzfs/\fR and use the ZFS dataset name
-for the rest of the name. The mount point and any sub-mounts that inherit
-sharing are shown as the shares of the subgroup. For example:
-.sp
-.in +2
-.nf
+handled.
+These shares appear as subgroups within the parent group
+.Sy zfs .
+The subgroups are always prefixed with
+.Sy zfs/
+and use the ZFS dataset name for the rest of the name.
+The mount point and any sub-mounts that inherit
+sharing are shown as the shares of the subgroup.
+For example:
+.Bd -literal -offset 2n
 # \fBsharemgr show -vp zfs\fR
 zfs        nfs=()
     zfs/ztest
           /ztest
           /ztest/backups
-.fi
-.in -2
-.sp
-
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBset\fR \fB[-nvh] -P \fIproto\fR [-S \fIoptionset\fR] [-p
-\fIproperty\fR=\fIvalue\fR]* [-s \fIshare path\fR] \fIgroup\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
+.Ed
+.It Cm set \
+    Oo Fl nvh Oc \
+    Fl P Ar proto \
+    Oo Fl S Ar optionset Oc \
+    Oo Fl p Ar property Ns = Ar value Oc Ns ... \
+    Oo Fl s Ar sharepath Oc \
+    Ar group
+.Pp
 Set protocol-specific properties on the specified group.
-.sp
-The \fB-P\fR option is required and must specify a valid protocol.
-.sp
+.Pp
+The
+.Fl P
+option is required and must specify a valid protocol.
+.Pp
 Optionsets are protocol-specific sets of properties that can be negotiated by
-the protocol client. For NFS, optionsets are equivalent to security modes as
-defined in \fBnfssec\fR(7). If \fB-S\fR \fIoptionset\fR is specified, the
-properties are applied to the selected optionset. Otherwise they are applied to
-the general optionset.
-.sp
-Together, \fB-P\fR and \fB-S\fR select a specific view of the group's options
-on which to work.
-.sp
-Property values are strings. A specified property is set to a new value if the
+the protocol client.
+For NFS, optionsets are equivalent to security modes as defined in
+.Xr nfssec 7 .
+If
+.Fl S Ar optionset
+is specified, the properties are applied to the selected optionset.
+Otherwise they are applied to the general optionset.
+.Pp
+Together,
+.Fl P
+and
+.Fl S
+select a specific view of the group's options on which to work.
+.Pp
+Property values are strings.
+A specified property is set to a new value if the
 property already exists or is added to the protocol if it does not already
 exist.
-.sp
-In the general case, at least one property must be set. If \fB-S\fR is
-specified, properties can be omitted and the specified optionset is enabled for
-the protocol.
-.sp
-The \fB-s\fR option allows setting properties on a per-share basis. While this
-is supported, it should be limited to managing legacy shares and to the
-occasional need for an override of a group-level property or placing an
+.Pp
+In the general case, at least one property must be set.
+If
+.Fl S
+is specified, properties can be omitted and the specified optionset is enabled
+for the protocol.
+.Pp
+The
+.Fl s
+option allows setting properties on a per-share basis.
+While this is supported, it should be limited to managing legacy shares and to
+the occasional need for an override of a group-level property or placing an
 additional property on one share within a group.
-.sp
+.Pp
 An example of this subcommand:
-.sp
-.in +2
-.nf
+.Bd -literal -offset 2n
 # \fBsharemgr set -P nfs -p anon=1234 mygroup\fR
-.fi
-.in -2
-.sp
-
-The preceding command adds the property \fBanon=1234\fR to the \fBnfs\fR view
-of group \fBmygroup\fR. If \fBmygroup\fR has existing shares, they will all be
-reshared with the new property value(s).
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBunset\fR \fB[-nvh] -P proto [-S \fIoptionset\fR] [-p \fIproperty\fR]* [-s
-\fIsharepath\fR ] \fIgroup\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
+.Ed
+.Pp
+The preceding command adds the property
+.Sy anon=1234
+to the
+.Sy nfs
+view of group
+.Ar mygroup .
+If
+.Ar mygroup
+has existing shares, they will all be reshared with the new property value(s).
+.It Cm unset \
+    Oo Fl nvh Oc \
+    Fl P Ar proto \
+    Oo Fl S Ar optionset Oc \
+    Oo Fl p Ar property Oc Ns ... \
+    Oo Fl s Ar sharepath Oc \
+    Ar group
+.Pp
 Unset the specified properties for the protocol or for the specified
-\fIoptionset\fR of the protocol.
-.sp
-In the general case, at least one property must be set. If \fB-S\fR is
-specified, properties can be omitted and the specified optionset is removed
+.Ar optionset
+of the protocol.
+.Pp
+In the general case, at least one property must be set.
+If
+.Fl S
+is specified, properties can be omitted and the specified optionset is removed
 from the protocol.
-.sp
-The \fB-s\fR option allows removing a share-specific property.
-.sp
+.Pp
+The
+.Fl s
+option allows removing a share-specific property.
+.Pp
 An example of this subcommand:
-.sp
-.in +2
-.nf
+.Bd -literal -offset 2n
 # \fBsharemgr unset -P nfs -p anon mygroup\fR
-.fi
-.in -2
-.sp
-
-The preceding command removes the \fBanon=\fR property from the \fBnfs\fR view
-of group \fBmygroup\fR. If \fBmygroup\fR has existing shares, they will all be
-reshared with the new property value(s).
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBadd-share\fR \fB[-nth] [-r \fIresource-name\fR] [-d "\fIdescription
-text\fR"] -s \fIsharepath\fR \fIgroup\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
+.Ed
+.Pp
+The preceding command removes the
+.Ar anon=
+property from the
+.Sy nfs
+view of group
+.Ar mygroup .
+If
+.Ar mygroup
+has existing shares, they will all be reshared with the new property value(s).
+.It Cm add-share \
+    Oo Fl nth Oc \
+    Oo Fl r Ar resource-name Oc \
+    Oo Fl d Ar \(dqdescription text\(dq Oc \
+    Fl s Ar sharepath \
+    Ar group
+.Pp
 Add a new share to the specified group.
-.sp
-The \fB-s\fR option is mandatory and takes a full directory path.
-.sp
-If either or both of \fB-d\fR and \fB-r\fR are specified, they specify values
-associated with the share. \fB-d\fR provides a description string to document
-the share and \fB-r\fR provides a protocol-independent resource name. Resource
-names are not used by NFS at this time but can be specified. These names
-currently follow the same naming rules as group names.
-.sp
-The temporary option (\fB-t\fR) results in the share being shared but not
-stored in the configuration repository. This option is intended for shares that
+.Pp
+The
+.Fl s
+option is mandatory and takes a full directory path.
+.Pp
+If either or both of
+.Fl d
+and
+.Fl r
+are specified, they specify values associated with the share.
+.Fl d
+provides a description string to document the share and
+.Fl r
+provides a protocol-independent resource name.
+Resource names are not used by NFS at this time but can be specified.
+These names currently follow the same naming rules as group names.
+.Pp
+The temporary option
+.Pq Fl t
+results in the share being shared but not
+stored in the configuration repository.
+This option is intended for shares that
 should not survive a reboot or server restart, or for testing purposes.
-Temporary shares are indicated in the \fBshow\fR subcommand output with an
-asterisk (\fB*\fR) preceding the share.
-.sp
-If \fIsharepath\fR is a ZFS path and that path is added to the \fBzfs\fR group,
-\fBsharemgr\fR creates a new ZFS subgroup; the new share is added to that
-subgroup. Any ZFS sub-filesystems under the ZFS filesystem designated by
-\fIsharepath\fR will inherit the shared status of \fIsharepath\fR.
-.sp
-The effect of the \fBadd-share\fR subcommand on a ZFS dataset is determined by
-the values of the \fBsharesmb\fR and \fBsharenfs\fR properties of that dataset.
-.sp
-See \fBzfs\fR(8) for a description of the \fBsharesmb\fR and \fBsharenfs\fR
+Temporary shares are indicated in the
+.Cm show
+subcommand output with an asterisk
+.Pq Ql *
+preceding the share.
+.Pp
+If
+.Ar sharepath
+is a ZFS path and that path is added to the
+.Ar zfs
+group,
+.Nm
+creates a new ZFS subgroup; the new share is added to that subgroup.
+Any ZFS sub-filesystems under the ZFS filesystem designated by
+.Ar sharepath
+will inherit the shared status of
+.Ar sharepath .
+.Pp
+The effect of the
+.Cm add-share
+subcommand on a ZFS dataset is determined by the values of the
+.Sy sharesmb
+and
+.Sy sharenfs
+properties of that dataset.
+.Pp
+See
+.Xr zfs 8
+for a description of the
+.Sy sharesmb
+and
+.Sy sharenfs
 properties.
-.sp
-The following are examples of the \fBadd-share\fR subcommand.
-.sp
-.in +2
-.nf
+.Pp
+The following are examples of the
+.Cm add-share
+subcommand.
+.Bd -literal -offset 2n
 # \fBsharemgr add-share -s /export/home/home0 -d "home \e
 directory set 0" -r HOME0 mygroup\fR
 
 # \fBsharemgr add-share -s /export/home/home1 -d "home \e
 directory set 1" -r HOME1 mygroup\fR
-.fi
-.in -2
-.sp
-
-The preceding commands add \fB/export/home/home0\fR and
-\fB/export/home/home1\fR to the group \fBmygroup\fR. A descriptive comment and
-a resource name are included.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBmove-share\fR \fB[-nvh] -s \fIsharepath\fR \fIdestination-group\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
+.Ed
+.Pp
+The preceding commands add
+.Pa /export/home/home0
+and
+.Pa /export/home/home1
+to the group
+.Ar mygroup .
+A descriptive comment and a resource name are included.
+.It Cm move-share \
+    Oo Fl nvh Oc \
+    Fl s Ar sharepath \
+    Ar destination-group
+.Pp
 Move the specified share from the group it is currently in to the specified
-destination group. The \fBmove-share\fR subcommand does not create a group. A
-specified group must exist for the command to succeed.
-.sp
+destination group.
+The
+.Cm move-share
+subcommand does not create a group.
+A specified group must exist for the command to succeed.
+.Pp
 The following is an example of this subcommand.
-.sp
-.in +2
-.nf
+.Bd -literal -offset 2n
 # \fBsharemgr move-share -s /export/home/home1 newgroup\fR
-.fi
-.in -2
-.sp
-
-Assuming \fB/export/home/home1\fR is in the group \fBmygroup\fR, the preceding
-command moves \fB/export/home/home1\fR to the group \fBnewgroup\fR and unshares
-and then reshares the directory with the properties associated with
-\fBnewgroup\fR.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBremove-share\fR \fB[-fnvh] -s \fIsharepath\fR \fIgroup\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
-Remove the specified share from the specified group. The force (\fB-f\fR)
+.Ed
+.Pp
+Assuming
+.Pa /export/home/home1
+is in the group
+.Ar mygroup ,
+the preceding command moves
+.Pa /export/home/home1
+to the group
+.Ar newgroup
+and unshares and then reshares the directory with the properties associated with
+.Ar newgroup .
+.It Cm remove-share \
+    Oo Fl fnvh Oc \
+    Fl s Ar sharepath \
+    Ar group
+.Pp
+Remove the specified share from the specified group.
+The force
+.Pq Fl f
 option forces the share to be removed even if it is busy.
-.sp
-You must specify the full path for \fIsharepath\fR. For group, use the subgroup
-as displayed in the output of the \fBsharemgr show\fR command. Note that if
+.Pp
+You must specify the full path for
+.Ar sharepath .
+For group, use the subgroup as displayed in the output of the
+.Nm Cm show
+command.
+Note that if
 there are subshares that were created by inheritance, these will be removed,
 along with the parent shares.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBset-share\fR \fB[-nvh] [-r \fIresource\fR] [-d "\fIdescription text\fR"]
--s \fIsharepath\fR \fIgroup\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
-Set or change the specified share's description and resource values. One use of
-\fBset-share\fR is to rename a resource. The syntax for this use of the
-subcommand is:
-.sp
-.in +2
-.nf
+.It Cm set-share \
+    Oo Fl nvh Oc \
+    Oo Fl r resource Oc \
+    Oo Fl d Ar \(dqdescription text\(dq Oc \
+    Fl s Ar sharepath \
+    Ar group
+.Pp
+Set or change the specified share's description and resource values.
+One use of
+.Cm set-share
+is to rename a resource.
+The syntax for this use of the subcommand is:
+.Bd -literal -offset 2n
 # \fBsharemgr set-share -r \fIcurrent_name\fR=\fInew_name\fR -s \fIsharepath\fR \fIgroup\fR\fR
-.fi
-.in -2
-.sp
-
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBenable\fR \fB[-nvh] [\fIgroup\fR... | -a]\fR\fR
-.ad
-.sp .6
-.RS 4n
-Enable the specified group(s), or (with \fB-a\fR) all groups, and start sharing
-the contained shares. This state persists across reboots.
-.sp
+.Ed
+.It Cm enable \
+    Oo Fl nvh Oc \
+    Oo Ar group Ns ... | Fl a Oc
+.Pp
+Enable the specified group(s), or
+.Po
+with
+.Fl a
+.Pc
+all groups, and start sharing the contained shares.
+This state persists across reboots.
+.Pp
 An enabled group will be shared whenever the corresponding SMF service instance
-is enabled. \fBsharemgr\fR will start the SMF service instance if it is not
-currently online.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBdisable\fR \fB[-nvh] [\fIgroup\fR... | -a]\fR\fR
-.ad
-.sp .6
-.RS 4n
-Disable the specified group(s), or (with \fB-a\fR) all groups, and unshare the
-shares that they contain. This state persists across reboots.
-.sp
+is enabled.
+.Nm
+will start the SMF service instance if it is not currently online.
+.It Cm disable \
+    Oo Fl nvh Oc \
+    Oo Ar group Ns ... | Fl a Oc
+.Pp
+Disable the specified group(s), or
+.Po
+with
+.Fl a
+.Pc
+all groups, and unshare the shares that they contain.
+This state persists across reboots.
+.Pp
 A disabled group will not be shared even if the corresponding SMF service
-instance is online. This feature is useful when you do not want a group of
+instance is online.
+This feature is useful when you do not want a group of
 shares to be started at boot time.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBstart\fR \fB[-vh] [-P \fIproto\fR] [\fIgroup\fR... | -a]\fR\fR
-.ad
-.sp .6
-.RS 4n
-Start the specified group, or (with \fB-a\fR) all groups. The \fBstart\fR
-subcommand is similar to \fBenable\fR in that all shares are started, but
-\fBstart\fR works only on groups that are enabled. \fBstart\fR is used by the
-SMF to start sharing at system boot.
-.sp
-A group will not start sharing if it is in the \fBsharemgr\fR \fBdisabled\fR
-state. However, the corresponding SMF service instance will be started.
-.sp
-Note that the \fBstart\fR subcommand is similar to the \fBshareall\fR(8)
-command in that it starts up only the configured shares. That is, the enabled
+.It Cm start \
+    Oo Fl vh Oc \
+    Oo Fl P Ar proto Oc \
+    Oo Ar group Ns ... | Fl a Oc
+.Pp
+Start the specified group, or
+.Po
+with
+.Fl a
+.Pc
+all groups.
+The
+.Cm start
+subcommand is similar to
+.Cm enable
+in that all shares are started, but
+.Cm start
+works only on groups that are enabled.
+.Cm start
+is used by the SMF to start sharing at system boot.
+.Pp
+A group will not start sharing if it is in the
+.Nm sharemgr Em disabled
+state.
+However, the corresponding SMF service instance will be started.
+.Pp
+Note that the
+.Cm start
+subcommand is similar to the
+.Xr shareall 8
+command in that it starts up only the configured shares.
+That is, the enabled
 shares will start being shared, but the configuration state is left the same.
 The command:
-.sp
-.in +2
-.nf
+.Bd -literal -offset 2n
 # \fBsharemgr start -a\fR
-.fi
-.in -2
-.sp
-
+.Ed
+.Pp
 \&...is equivalent to:
-.sp
-.in +2
-.nf
+.Bd -literal -offset 2n
 # \fBshareall\fR
-.fi
-.in -2
-.sp
-
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBstop\fR \fB[-vh] [-P \fIproto\fR] [\fIgroup\fR... | -a]\fR\fR
-.ad
-.sp .6
-.RS 4n
-Stop the specified group, or (with \fB-a\fR) all groups. The \fBstop\fR
-subcommand is similar to \fBdisable\fR in that all shares are no longer shared,
-but it works only on groups that are enabled. \fBstop\fR is used by the SMF to
-stop sharing at system shutdown.
-.sp
-Note that the \fBstop\fR subcommand is similar to the \fBunshareall\fR(8)
+.Ed
+.It Cm stop \
+    Oo Fl vh Oc \
+    Oo Fl P Ar proto Oc \
+    Oo Ar group Ns ... | Fl a Oc
+.Pp
+Stop the specified group, or
+.Po
+with
+.Fl a
+.Pc
+all groups.
+The
+.Cm stop
+subcommand is similar to
+.Cm disable
+in that all shares are no longer shared,
+but it works only on groups that are enabled.
+.Cm stop
+is used by the SMF to stop sharing at system shutdown.
+.Pp
+Note that the
+.Cm stop
+subcommand is similar to the
+.Xr unshareall 8
 command in that all active shares are unshared, but the configuration is left
-the same. That is, the shares are stopped but the service instances are left
-enabled. The command:
-.sp
-.in +2
-.nf
+the same.
+That is, the shares are stopped but the service instances are left enabled.
+The command:
+.Bd -literal -offset 2n
 # \fBsharemgr stop -a\fR
-.fi
-.in -2
-.sp
-
+.Ed
+.Pp
 \&...is equivalent to:
-.sp
-.in +2
-.nf
+.Bd -literal -offset 2n
 # \fBunshareall\fR
-.fi
-.in -2
-.sp
-
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBshare\fR \fB[-F \fIfstype\fR] [-p] [-o \fIoptionlist\fR] [-d
-\fIdescription\fR] [\fIpathname\fR [\fIresourcename\fR]]\fR\fR
-.ad
-.sp .6
-.RS 4n
-Shares the specified path in the \fBdefault\fR share group. This subcommand
-implements the \fBshare\fR(8) functionality. Shares that are shared in this
-manner will be transient shares. Use of the \fB-p\fR option causes the shares
-to be persistent.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBunshare\fR \fB[-F \fIfstype\fR] [-p] [-o \fIoptionlist\fR]
-\fIsharepath\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
-Unshares the specified share. This subcommand implements the \fBunshare\fR(8)
-functionality. By default, the \fBunshare\fR is temporary. The \fB-p\fR option
+.Ed
+.It Cm share \
+    Oo Fl F Ar fstype Oc \
+    Oo Fl p Oc \
+    Oo Fl o Ar optionlist Oc \
+    Oo Fl d Ar descriptoion Oc \
+    Oo Ar pathname Oo Ar resoucename Oc Oc
+.Pp
+Shares the specified path in the
+.Ar default
+share group.
+This subcommand implements the
+.Xr share 8
+functionality.
+Shares that are shared in this manner will be transient shares.
+Use of the
+.Fl p
+option causes the shares to be persistent.
+.It Cm unshare \
+    Oo Fl F Ar fstype Oc \
+    Oo Fl p Oc \
+    Oo Fl o Ar optionlist Oc \
+    Ar sharepath
+.Pp
+Unshares the specified share.
+This subcommand implements the
+.Xr unshare 8
+functionality.
+By default, the
+.Cm unshare
+is temporary.
+The
+.Fl p
+option
 is provided to remove the share from the configuration in a way that persists
 across reboots.
-.RE
-
-.SS "Supported Properties"
-Properties are protocol-specific. Currently, only the NFS and SMB protocols are
-supported. Properties have the following characteristics:
-.RS +4
-.TP
-.ie t \(bu
-.el o
-Values of type \fIboolean\fR take either \fBtrue\fR or \fBfalse\fR.
-.RE
-.RS +4
-.TP
-.ie t \(bu
-.el o
-Values of type \fIvalue\fR take a numeric value.
-.RE
-.RS +4
-.TP
-.ie t \(bu
-.el o
-Values of type \fIfile\fR take a file name and not a file path.
-.RE
-.RS +4
-.TP
-.ie t \(bu
-.el o
-Values of type \fIaccess-list\fR are described in detail following the
-descriptions of the NFS properties.
-.RE
-.sp
-.LP
+.El
+.Ss "Supported Properties"
+Properties are protocol-specific.
+Currently, only the NFS and SMB protocols are supported.
+Properties have the following characteristics:
+.Bl -bullet -offset indent
+.It
+Values of type
+.Sy boolean
+take either
+.Sy true
+or
+.Sy false .
+.It
+Values of type
+.Sy value
+take a numeric value.
+.It
+Values of type
+.Sy file
+take a file name and not a file path.
+.It
+Values of type
+.Sy access-list
+are described in detail following the descriptions of the NFS properties.
+.El
+.Pp
 The general properties supported for NFS are:
-.sp
-.ne 2
-.na
-\fB\fBabe=\fR\fIboolean\fR\fR
-.ad
-.sp .6
-.RS 4n
-Set the access-based enumeration (ABE) policy for a share.  When set to
-\fBtrue\fR, ABE filtering is enabled on this share and directory entries to
+.Bl -tag -width 1
+.It Cm abe Ns = Ns Ar boolean
+.Pp
+Set the access-based enumeration (ABE) policy for a share.
+When set to
+.Ql true ,
+ABE filtering is enabled on this share and directory entries to
 which the requesting user has no access will be omitted from directory listings
-returned to the client. When set to \fBfalse\fR or not defined, ABE filtering
-will not be performed on  this share. This property is not defined by default.
-.sp
-.ne 2
-.na
-\fB\fBdisabled\fR\fR
-.ad
-.sp .6
-.RS 4n
+returned to the client.
+When set to
+.Ql false
+or not defined, ABE filtering will not be performed on this share.
+This property is not defined by default.
+.Bl -tag -width disabled
+.It false
 Disable ABE for this share.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBenabled\fR\fR
-.ad
-.sp .6
-.RS 4n
+.It true
 Enable ABE for this share.
-.RE
-
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBaclok=\fIboolean\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
+.El
+.It Cm aclok Ns = Ns Ar boolean
+.Pp
 Allows the NFS server to do access control for NFS Version 2 clients (running
-SunOS 2.4 or earlier). When \fBaclok\fR is set on the server, maximum access is
-given to all clients. For example, with \fBaclok\fR set, if anyone has read
-permissions, then everyone does. If \fBaclok\fR is not set, minimum access is
-given to all clients.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBad-container\fR\fR
-.ad
-.sp .6
-.RS 4n
+SunOS 2.4 or earlier).
+When
+.Cm aclok
+is set on the server, maximum access is given to all clients.
+For example, with
+.Cm aclok
+set, if anyone has read permissions, then everyone does.
+If
+.Cm aclok
+is not set, minimum access is given to all clients.
+.It Cm ad-container
+.Pp
 Specifies the AD container in which to publish shares.
-.sp
+.Pp
 The AD container is specified as a comma-separated list of attribute name-value
 pairs using the LDAP distinguished name (DN) or relative distinguished name
-(RDN) format. The DN or RDN must be specified in LDAP format using the
-\fBcn=\fR, \fBou=\fR, and \fBdc=\fR prefixes:
-.RS +4
-.TP
-.ie t \(bu
-.el o
-\fBcn\fR represents the common name
-.RE
-.RS +4
-.TP
-.ie t \(bu
-.el o
-\fBou\fR represents the organizational unit
-.RE
-.RS +4
-.TP
-.ie t \(bu
-.el o
-\fBdc\fR represents the domain component
-.RE
-\fBcn=\fR, \fBou=\fR and \fBdc=\fR are attribute types. The attribute type used
+(RDN) format.
+The DN or RDN must be specified in LDAP format using the
+.Ar cn= ,
+.Ar ou= ,
+and
+.Ar dc=
+prefixes:
+.Bl -bullet -offset indent
+.It
+.Cm cn
+represents the common name
+.It
+.Cm ou
+represents the organizational unit
+.It
+.Cm dc
+represents the domain component
+.El
+.Pp
+.Cm cn= ,
+.Cm ou= ,
+and
+.Cm dc=
+are attribute types.
+The attribute type used
 to describe an object's RDN is called the naming attribute, which, for ADS,
 includes the following object classes:
-.RS +4
-.TP
-.ie t \(bu
-.el o
-\fBcn\fR for the \fBuser\fR object class
-.RE
-.RS +4
-.TP
-.ie t \(bu
-.el o
-\fBou\fR for the organizational unit (\fBOU\fR) object class
-.RE
-.RS +4
-.TP
-.ie t \(bu
-.el o
-\fBdc\fR for the \fBdomainDns\fR object class
-.RE
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBanon=\fIuid\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
-Set \fIuid\fR to be the effective user ID of unknown users. By default, unknown
-users are given the effective user ID \fBUID_NOBODY\fR. If uid is set to
-\fB-1\fR, access is denied.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBcatia=\fIboolean\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
+.Bl -bullet -offset indent
+.It
+.Cm cn
+for the
+.Sy user
+object class
+.It
+.Cm ou
+for the organizational unit
+.Pq Cm OU
+object class
+.It
+.Cm dc
+for the
+.Cm domainDns
+object class
+.El
+.It Cm anon Ns = Ns Ar uid
+.Pp
+Set
+.Ar uid
+to be the effective user ID of unknown users.
+By default, unknown users are given the effective user ID
+.Dv UID_NOBODY .
+If uid is set to
+.Sy -1 ,
+access is denied.
+.It Cm catia Ns = Ns Ar boolean
+.Pp
 CATIA V4 uses characters in file names that are considered to be invalid by
-Windows. CATIA V5 is available on Windows. A CATIA V4 file could be
+Windows.
+CATIA V5 is available on Windows.
+A CATIA V4 file could be
 inaccessible to Windows clients if the file name contains any of the characters
-that are considered illegal in Windows. By default, CATIA character
-substitution is not performed.
-.sp
-If the \fBcatia\fR property is set to true, the following character
+that are considered illegal in Windows.
+By default, CATIA character substitution is not performed.
+If the
+.Cm catia
+property is set to true, the following character
 substitution is applied to file names.
-.sp
-.in +2
-.nf
+.Bd -literal -offset 2n
 CATIA    CATIA
 V4 UNIX  V5 Windows
   "      \e250   0x00a8  Dieresis
@@ -799,541 +841,448 @@ V4 UNIX  V5 Windows
   ?      \e277   0x00bf  Inverted Question Mark
   \e      \e377   0x00ff  Latin Small Letter Y with Dieresis
   |      \e246   0x00a6  Broken Bar
-.fi
-.in -2
-.sp
-
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBcksum=\fIcksumlist\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
-Set the share to attempt to use end-to-end checksums. The value \fIcksumlist\fR
+.Ed
+.It Cm cksum Ns = Ns Ar cksumlist
+.Pp
+Set the share to attempt to use end-to-end checksums.
+The value
+.Ar cksumlist
 specifies the checksum algorithms that should be used.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBcsc=\fR\fIvalue\fR\fR
-.ad
-.sp .6
-.RS 4n
-Set the client-side caching policy for a share. Client-side caching is a client
+.It Cm csc Ns = Ns Ar value
+.Pp
+Set the client-side caching policy for a share.
+Client-side caching is a client
 feature and offline files are managed entirely by the clients.
-.sp
-.LP
-The following are valid values for the \fBcsc\fR property:
-.RS +4
-.TP
-.ie t \(bu
-.el o
-\fBmanual\fR \fB-\fR Clients are permitted to cache files from the specified
-share for offline use as requested by users. However, automatic file-by-file
-reintegration is not permitted. \fBmanual\fR is the default value.
-.RE
-.RS +4
-.TP
-.ie t \(bu
-.el o
-\fBauto\fR \fB-\fR Clients are permitted to automatically cache files from the
+.Pp
+The following are valid values for the
+.Cm csc
+property:
+.Bl -tag -width disabled -offset indent
+.It Sy manual
+Clients are permitted to cache files from the specified
+share for offline use as requested by users.
+However, automatic file-by-file reintegration is not permitted.
+.Sy manual
+is the default value.
+.It Sy auto
+Clients are permitted to automatically cache files from the
 specified share for offline use and file-by-file reintegration is permitted.
-.RE
-.RS +4
-.TP
-.ie t \(bu
-.el o
-\fBvdo\fR \fB-\fR Clients are permitted to automatically cache files from the
+.It Sy vdo
+Clients are permitted to automatically cache files from the
 specified share for offline use, file-by-file reintegration is permitted, and
 clients are permitted to work from their local cache even while offline.
-.RE
-.RS +4
-.TP
-.ie t \(bu
-.el o
-\fBdisabled\fR \fB-\fR Client-side caching is not permitted for this share.
-.RE
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBguestok=\fR\fIboolean\fR\fR
-.ad
-.sp .6
-.RS 4n
-Set the guest access policy for the share. When set to \fBtrue\fR guest access
-is allowed on this share. When set to \fBfalse\fR or not defined guest access
-is not allowed on this share. This property is not defined by default.
-.sp
-An \fBidmap\fR(8) name-based rule can be used to map \fBguest\fR to any local
-username, such as \fBguest\fR or \fBnobody\fR. If the local account has a
-password in \fB/var/smb/smbpasswd\fR the guest connection will be authenticated
-against that password. Any connection made using an account that maps to the
+.It Sy disabled
+Client-side caching is not permitted for this share.
+.El
+.It Cm guestok Ns = Ns Ar boolean
+.Pp
+Set the guest access policy for the share.
+When set to
+.Sy true
+guest access is allowed on this share.
+When set to
+.Sy false
+or not defined guest access is not allowed on this share.
+This property is not defined by default.
+.Pp
+An
+.Xr idmap 8
+name-based rule can be used to map
+.Sy guest
+to any local username, such as
+.Sy guest
+or
+.Sy nobody .
+If the local account has a password in
+.Pa /var/smb/smbpasswd
+the guest connection will be authenticated against that password.
+Any connection made using an account that maps to the
 local guest account will be treated as a guest connection.
-.sp
+.Pp
 Example name-based rule:
-.sp
-.in +2
-.nf
+.Bd -literal -offset 2n
 # \fBidmap add winname:Guest unixuser:guest\fR
-.fi
-.in -2
-.sp
-
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBindex=\fIfile\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
-Load \fIfile\fR rather than a listing of the directory containing this file
+.Ed
+.It Cm index Ns = Ns Ar file
+.Pp
+Load
+.Ar file
+rather than a listing of the directory containing this file
 when the directory is referenced by an NFS URL.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBlog=\fItag\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
-Enables NFS server logging for the specified system. The optional tag
-determines the location of the related log files. The tag is defined in
-\fBetc/nfs/nfslog.conf\fR. If no tag is specified, the default values
-associated with the global tag in \fBetc/nfs/nfslog.conf\fR is used. Support of
+.It Cm log Ns = Ns Ar tag
+.Pp
+Enables NFS server logging for the specified system.
+The optional tag determines the location of the related log files.
+The tag is defined in
+.Pa /etc/nfs/nfslog.conf .
+If no tag is specified, the default values
+associated with the global tag in
+.Pa /etc/nfs/nfslog.conf
+is used.
+Support of
 NFS server logging is available only for NFS Version 2 and Version 3 requests.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBnosub=\fIboolean\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
-Prevents clients from mounting subdirectories of shared directories. For
-example, if \fB/export\fR is shared with the \fBnosub\fR option on server
-\fBwool\fR then an NFS client cannot do:
-.sp
-.in +2
-.nf
+.It Cm nosub Ns = Ns Ar boolean
+.Pp
+Prevents clients from mounting subdirectories of shared directories.
+For example, if
+.Pa /export
+is shared with the
+.Cm nosub
+option on server
+.Ql wool
+then an NFS client cannot do:
+.Bd -literal -offset 2n
 # \fBmount -F nfs wool:/export/home/mnt\fR
-.fi
-.in -2
-.sp
-
-NFS Version 4 does not use the MOUNT protocol. The \fBnosub\fR option applies
-only to NFS Version 2 and Version 3 requests.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBnosuid=\fIboolean\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
+.Ed
+.Pp
+NFS Version 4 does not use the MOUNT protocol.
+The
+.Cm nosub
+option applies only to NFS Version 2 and Version 3 requests.
+.It Cm nosuid Ns = Ns Ar boolean
+.Pp
 By default, clients are allowed to create files on a shared file system with
-the \fBsetuid\fR or \fBsetgid\fR mode enabled. Specifying \fBnosuid\fR causes
-the server file system to silently ignore any attempt to enable the
-\fBsetuid\fR or \fBsetgid\fR mode bits.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBpublic=\fIboolean\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
-Moves the location of the public file handle from root (\fB/\fR) to the
-exported directory for WebNFS-enabled browsers and clients. This option does
-not enable WebNFS service; WebNFS is always on. Only one file system per server
-can have the \fBpublic\fR property. You can apply the \fBpublic\fR property
-only to a share and not to a group.
-.RE
-
-.sp
-.LP
-NFS also supports negotiated optionsets for supported security modes. The
-security modes are documented in \fBnfssec\fR(7). The properties supported for
-these optionsets are:
-.sp
-.ne 2
-.na
-\fB\fIcharset\fR=\fIaccess-list\fR\fR
-.ad
-.sp .6
-.RS 4n
-Where \fIcharset\fR is one of: \fBeuc-cn\fR, \fBeuc-jp\fR, \fBeuc-jpms\fR,
-\fBeuc-kr\fR, \fBeuc-tw\fR, \fBiso8859-1\fR, \fBiso8859-2\fR, \fBiso8859-5\fR,
-\fBiso8859-6\fR, \fBiso8859-7\fR, \fBiso8859-8\fR, \fBiso8859-9\fR,
-\fBiso8859-13\fR, \fBiso8859-15\fR, \fBkoi8-r\fR.
-.sp
-Clients that match the \fIaccess-list\fR for one of these properties will be
+the
+.Sy setuid
+or
+.Sy setgid
+mode enabled.
+Specifying
+.Sy nosuid
+causes the server file system to silently ignore any attempt to enable the
+.Sy setuid
+or
+.Sy setgid
+mode bits.
+.It Cm public Ns = Ns Ar boolean
+.Pp
+Moves the location of the public file handle from root
+.Pq /
+to the exported directory for WebNFS-enabled browsers and clients.
+This option does not enable WebNFS service; WebNFS is always on.
+Only one file system per server can have the
+.Sy public
+property.
+You can apply the
+.Sy public
+property only to a share and not to a group.
+.El
+.Pp
+NFS also supports negotiated optionsets for supported security modes.
+The security modes are documented in
+.Xr nfssec 7 .
+The properties supported for these optionsets are:
+.Bl -tag -width 1
+.It Cm charset Ns = Ns Ar access-list
+.Pp
+Where
+.Cm charset
+is one of:
+.Sy euc-cn ,
+.Sy euc-jp ,
+.Sy euc-jpms ,
+.Sy euc-kr ,
+.Sy euc-tw ,
+.Sy iso8859-1 ,
+.Sy iso8859-2 ,
+.Sy iso8859-5 ,
+.Sy iso8859-6 ,
+.Sy iso8859-7 ,
+.Sy iso8859-8 ,
+.Sy iso8859-9 ,
+.Sy iso8859-13 ,
+.Sy iso8859-15 ,
+.Sy koi8-r .
+.Pp
+Clients that match the
+.Ar access-list
+for one of these properties will be
 assumed to be using that character set and file and path names will be
 converted to UTF-8 for the server.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBro=\fIaccess-list\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
-Sharing is read-only to the clients listed in \fIaccess-list\fR; overrides the
-\fBrw\fR suboption for the clients specified. See the description of
-\fIaccess-list\fR below.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBrw=\fIaccess-list\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
-Sharing is read-write to the clients listed in \fIaccess-list\fR; overrides the
-\fBro\fR suboption for the clients specified. See the description of
-\fIaccess-list\fR below.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBnone=\fIaccess-list\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
-Access is not allowed to any client that matches the access list. The exception
-is when the access list is an asterisk (\fB*\fR), in which case \fBro\fR or
-\fBrw\fR can override \fBnone\fR.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBroot=\fIaccess-list\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
-Only root users from the hosts specified in \fIaccess-list\fR have root access.
-See details on \fIaccess-list\fR below. By default, no host has root access, so
-root users are mapped to an anonymous user ID (see the \fBanon=uid\fR option
-described above). Netgroups can be used if the file system shared is using UNIX
-authentication (\fBAUTH_SYS\fR).
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBroot_mapping=\fIuid\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
+.It Cm ro Ns = Ns Ar access-list
+.Pp
+Sharing is read-only to the clients listed in
+.Ar access-list ;
+overrides the
+.Cm rw
+suboption for the clients specified.
+See the description of
+.Ar access-list
+below.
+.It Cm rw Ns = Ns Ar access-list
+.Pp
+Sharing is read-write to the clients listed in
+.Ar access-list ;
+overrides the
+.Cm ro
+suboption for the clients specified.
+See the description of
+.Ar access-list
+below.
+.It Cm none Ns = Ns Ar access-list
+.Pp
+Access is not allowed to any client that matches the access list.
+The exception
+is when the access list is an asterisk
+.Pq Ql * ,
+in which case
+.Cm ro
+or
+.Cm rw
+can override
+.Cm none .
+.It Cm root Ns = Ns Ar access-list
+.Pp
+Only root users from the hosts specified in
+.Ar access-list
+have root access.
+See details on
+.Ar access-list
+below.
+By default, no host has root access, so
+root users are mapped to an anonymous user ID (see the
+.Cm anon Ns = Ns Ar uid
+option described above).
+Netgroups can be used if the file system shared is using UNIX
+authentication
+.Pq Dv AUTH_SYS .
+.It Cm root_mapping Ns = Ns Ar uid
+.Pp
 For a client that is allowed root access, map the root UID to the specified
 user id.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBwindow=\fIvalue\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
-When sharing with \fBsec=dh\fR (see \fBnfssec\fR(7)), set the maximum lifetime
-(in seconds) of the RPC request's credential (in the authentication header)
-that the NFS server allows. If a credential arrives with a lifetime larger than
-what is allowed, the NFS server rejects the request. The default value is 30000
-seconds (8.3 hours). This property is ignored for security modes other than
-\fBdh\fR.
-.RE
-
-.sp
-.LP
+.It Cm window Ns = Ns Ar value
+.Pp
+When sharing with
+.Cm sec Ns = Ns Sy dh
+.Po
+see
+.Xr nfssec 7
+.Pc ,
+set the maximum lifetime (in seconds) of the RPC request's credential
+(in the authentication header) that the NFS server allows.
+If a credential arrives with a lifetime larger than
+what is allowed, the NFS server rejects the request.
+The default value is 30000 seconds (8.3 hours).
+This property is ignored for security modes other than
+.Sy dh .
+.El
+.Pp
 The general properties supported for SMB are:
-.sp
-.ne 2
-.na
-\fB\fBencrypt=\fR\fIstring\fR\fR
-.ad
-.sp .6
-.RS 4n
-Controls SMB3 per-share encryption. This is similar to the global smbd/encrypt
-option. For requests on a particular share, the server's behavior is controlled
+.Bl -tag -width 1
+.It Cm encrypt Ns = Ns Ar string
+.Pp
+Controls SMB3 per-share encryption.
+This is similar to the global smbd/encrypt option.
+For requests on a particular share, the server's behavior is controlled
 by the stricter of this option and smbd/encrypt.
-.sp
-When set to \fBdisabled\fR, the server will not ask clients to encrypt requests.
-When set to \fBenabled\fR, the server will ask clients to encrypt requests,
-but will not require that they do so. Any message than can be encrypted
-will be encrypted.
-When set to \fBrequired\fR, the server will deny access to or disconnect
+.Pp
+When set to
+.Sy disabled ,
+the server will not ask clients to encrypt requests.
+When set to
+.Sy enabled ,
+the server will ask clients to encrypt requests,
+but will not require that they do so.
+Any message than can be encrypted will be encrypted.
+When set to
+.Sy required ,
+the server will deny access to or disconnect
 any client that does not support encryption or fails to encrypt requests
 that they should.
-.sp
-In other words, the \fBenabled\fR behavior is that any message that CAN
-be encrypted SHOULD be encrypted, while the \fBrequired\fR behavior is that any
-message that CAN be encrypted MUST be encrypted.
-.sp
+.Pp
+In other words, the
+.Sy enabled
+behavior is that any message that CAN
+be encrypted SHOULD be encrypted, while the
+.Sy required
+behavior is that any message that CAN be encrypted MUST be encrypted.
+.Pp
 This property is not defined by default.
-.sp
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBro=\fIaccess-list\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
-Sharing is read-only to the clients listed in \fIaccess-list\fR; overrides the
-\fBrw\fR suboption for the clients specified. See the description of
-\fIaccess-list\fR below.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBrw=\fIaccess-list\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
-Sharing is read-write to the clients listed in \fIaccess-list\fR; overrides the
-\fBro\fR suboption for the clients specified. See the description of
-\fIaccess-list\fR below.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fBnone=\fIaccess-list\fR\fR\fR
-.ad
-.sp .6
-.RS 4n
-Access is not allowed to any client that matches the access list. The exception
-is when the access list is an asterisk (\fB*\fR), in which case \fBro\fR or
-\fBrw\fR can override \fBnone\fR.
-.RE
-
-.SS "Access List Argument"
-The \fIaccess-list\fR argument is either the string \fB"*"\fR to represent all
-hosts or a colon-separated list whose components can be any number of the
-following:
-.sp
-.ne 2
-.na
-\fB\fIhostname\fR\fR
-.ad
-.sp .6
-.RS 4n
-The name of a host. With a server configured for DNS or LDAP naming in the
-\fBnsswitch.conf\fR(5) \fBhosts\fR entry, a hostname must be represented as a
-fully qualified DNS or LDAP name.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fInetgroup\fR\fR
-.ad
-.sp .6
-.RS 4n
-A \fInetgroup\fR contains a number of hostnames. With a server configured for
-DNS or LDAP naming in the \fBnsswitch.conf\fR(5) \fBhosts\fR entry, any
+.It Cm ro Ns = Ns Ar access-list
+.Pp
+Sharing is read-only to the clients listed in
+.Ar access-list ;
+overrides the
+.Cm rw
+suboption for the clients specified.
+See the description of
+.Ar access-list
+below.
+.It Cm rw Ns = Ns Ar access-list
+.Pp
+Sharing is read-write to the clients listed in
+.Ar access-list ;
+overrides the
+.Cm ro
+suboption for the clients specified.
+See the description of
+.Ar access-list
+below.
+.It Cm none Ns = Ns access-list
+.Pp
+Access is not allowed to any client that matches the access list.
+The exception is when the access list is an asterisk
+.Pq Ql * ,
+in which case
+.Cm ro
+or
+.Cm rw
+can override
+.Cm none .
+.El
+.Ss "Access List Argument"
+The
+.Ar access-list
+argument is either the string
+.Ql *
+to represent all hosts or a colon-separated list whose components can be any
+number of the following:
+.Bl -tag -width 1
+.It Ar hostname
+.Pp
+The name of a host.
+With a server configured for DNS or LDAP naming in the
+.Xr nsswitch.conf 5
+.Ql hosts
+entry, a hostname must be represented as a fully qualified DNS or LDAP name.
+.It Ar netgroup
+.Pp
+A
+.Ar netgroup
+contains a number of hostnames.
+With a server configured for DNS or LDAP naming in the
+.Xr nsswitch.conf 5
+.Ql hosts
+entry, any
 hostname in a netgroup must be represented as a fully qualified DNS or LDAP
 name.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fIdomainname\fR.\fIsuffix\fR\fR
-.ad
-.sp .6
-.RS 4n
+.It Ar domainname . Ns Ar suffix
+.Pp
 To use domain membership the server must use DNS or LDAP, rather than, for
-example, NIS, to resolve hostnames to IP addresses. That is, the
-\fBhosts\fR entry in the \fBnsswitch.conf\fR(5) must specify \fBdns\fR or
-\fBldap\fR ahead of \fBnis\fR, because only DNS and LDAP
-return the full domain name of the host. Other name services, such as NIS,
+example, NIS, to resolve hostnames to IP addresses.
+That is, the
+.Sy hosts
+entry in the
+.Xr nsswitch.conf 5
+must specify
+.Ql dns
+or
+.Ql ldap
+ahead of
+.Ql nis ,
+because only DNS and LDAP return the full domain name of the host.
+Other name services, such as NIS,
 cannot be used to resolve hostnames on the server because, when mapping
-an IP address to a hostname, they do not return domain information. For
-example, for the IP address 172.16.45.9:
-.sp
-.ne 2
-.na
-\fBNIS\fR
-.ad
-.sp .6
-.RS 4n
-Returns: \fBmyhost\fR
-.RE
-
-.sp
-.ne 2
-.na
-\fBDNS or LDAP\fR
-.ad
-.sp .6
-.RS 4n
-Returns: \fBmyhost.mydomain.example.com\fR
-.RE
-
+an IP address to a hostname, they do not return domain information.
+For example, for the IP address 172.16.45.9:
+.Bl -tag -width "DNS OR LDAP"
+.It Sy NIS
+Returns:
+.Sy myhost
+.It Sy DNS or LDAP
+Returns:
+.Sy myhost.mydomain.example.com
+.El
+.Pp
 The domain name suffix is distinguished from hostnames and netgroups by a
-prefixed dot. For example:
-.sp
-.in +2
-.nf
+prefixed dot.
+For example:
+.Bd -literal -offset 2n
 rw=.mydomain.example.com
-.fi
-.in -2
-
-A single dot can be used to match a hostname with no suffix. For example, the
+.Ed
+.Pp
+A single dot can be used to match a hostname with no suffix.
+For example, the
 specification:
-.sp
-.in +2
-.nf
+.Bd -literal -offset 2n
 rw=.
-.fi
-.in -2
-
-\&...matches \fBmydomain\fR but not \fBmydomain.example.com\fR. This feature
-can be used to match hosts resolved through NIS rather than DNS and
+.Ed
+.Pp
+\&...matches
+.Ql mydomain
+but not
+.Ql mydomain.example.com .
+This feature can be used to match hosts resolved through NIS rather than DNS and
 LDAP.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fInetwork\fR\fR
-.ad
-.sp .6
-.RS 4n
-The network or subnet component is preceded by an at-sign (\fB@\fR). It can be
-either a name or a dotted address. If a name, it is converted to a dotted
-address by \fBgetnetbyname\fR(3SOCKET). For example:
-.sp
-.in +2
-.nf
+.It Ar network
+.Pp
+The network or subnet component is preceded by an at-sign
+.Pq Ql @ .
+It can be either a name or a dotted address.
+If a name, it is converted to a dotted address by
+.Xr getnetbyname 3SOCKET .
+For example:
+.Bd -literal -offset 2n
 =@mynet
-.fi
-.in -2
-
+.Ed
+.Pp
 \&...is equivalent to:
-.sp
-.in +2
-.nf
+.Bd -literal -offset 2n
 =@172.16 or =@172.16.0.0
-.fi
-.in -2
-
+.Ed
+.Pp
 The network prefix assumes an octet-aligned netmask determined from the zeroth
 octet in the low-order part of the address up to and including the high-order
-octet, if you want to specify a single IP address. In the case where network
+octet, if you want to specify a single IP address.
+In the case where network
 prefixes are not byte-aligned, the syntax allows a mask length to be specified
-explicitly following a slash (\fB/\fR) delimiter. For example:
-.sp
-.in +2
-.nf
+explicitly following a slash
+.Pq Ql /
+delimiter.
+For example:
+.Bd -literal -offset 2n
 =@theothernet/17 or =@172.16.132/22
-.fi
-.in -2
-
+.Ed
+.Pp
 \&...where the mask is the number of leftmost contiguous significant bits in
 the corresponding IP address.
-.RE
-
-.sp
-.LP
-A prefixed minus sign (\fB-\fR) denies access to a component of
-\fIaccess-list\fR. The list is searched sequentially until a match is found
+.El
+.Pp
+A prefixed minus sign
+.Pq Ql -
+denies access to a component of
+.Ar access-list .
+The list is searched sequentially until a match is found
 that either grants or denies access, or until the end of the list is reached.
-For example, if host \fBterra\fR is in the netgroup \fBengineering\fR, then:
-.sp
-.in +2
-.nf
+For example, if host
+.Ql terra
+is in the netgroup
+.Ql engineering ,
+then:
+.Bd -literal -offset 2n
 rw=-terra:engineering
-.fi
-.in -2
-
-.sp
-.LP
-\&...denies access to \fBterra\fR, but:
-.sp
-.in +2
-.nf
+.Ed
+.Pp
+\&...denies access to
+.Ql terra ,
+but:
+.Bd -literal -offset 2n
 rw=engineering:-terra
-.fi
-.in -2
-
-.sp
-.LP
-\&...grants access to \fBterra\fR.
-.SH EXIT STATUS
-.ne 2
-.na
-\fB\fB0\fR\fR
-.ad
-.RS 18n
+.Ed
+.Pp
+\&...grants access to
+.Ql terra .
+.Sh FILES
+.Bl -tag -width Pa
+.It Pa /usr/include/libshare.h
+Error codes used for exit status.
+.El
+.Sh EXIT STATUS
+.Bl -tag -offset indent -width "other non-zero" -compact
+.It Er 0
 Successful completion.
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fB98\fR\fR
-.ad
-.RS 18n
+.It Er 98
 Service is offline and cannot be enabled (start only).
-.RE
-
-.sp
-.ne 2
-.na
-\fB\fIother non-zero\fR\fR
-.ad
-.RS 18n
+.It Er other non-zero
 Command failed.
-.RE
-
-.SH FILES
-.ne 2
-.na
-\fB\fB/usr/include/libshare.h\fR\fR
-.ad
-.RS 27n
-Error codes used for exit status.
-.RE
-
-.SH ATTRIBUTES
-See \fBattributes\fR(7) for descriptions of the following attributes:
-.sp
-
-.sp
-.TS
-box;
-c | c
-l | l .
-ATTRIBUTE TYPE	ATTRIBUTE VALUE
-_
-Interface Stability	Committed
-.TE
-
-.SH SEE ALSO
-.BR attributes (7),
-.BR nfssec (7),
-.BR smf (7),
-.BR standards (7),
-.BR idmap (8),
-.BR sharectl (8),
-.BR zfs (8)
+.El
+.Sh INTERFACE STABILITY
+Committed
+.Sh SEE ALSO
+.Xr attributes 7 ,
+.Xr nfssec 7 ,
+.Xr smf 7 ,
+.Xr standards 7 ,
+.Xr idmap 8 ,
+.Xr sharectl 8 ,
+.Xr zfs 8