diff options
author | stevel@tonic-gate <none@none> | 2005-06-14 00:00:00 -0700 |
---|---|---|
committer | stevel@tonic-gate <none@none> | 2005-06-14 00:00:00 -0700 |
commit | 7c478bd95313f5f23a4c958a745db2134aa03244 (patch) | |
tree | c871e58545497667cbb4b0a4f2daf204743e1fe7 /usr/src/uts/common/sys/mtio.h | |
download | illumos-gate-7c478bd95313f5f23a4c958a745db2134aa03244.tar.gz |
OpenSolaris Launch
Diffstat (limited to 'usr/src/uts/common/sys/mtio.h')
-rw-r--r-- | usr/src/uts/common/sys/mtio.h | 330 |
1 files changed, 330 insertions, 0 deletions
diff --git a/usr/src/uts/common/sys/mtio.h b/usr/src/uts/common/sys/mtio.h new file mode 100644 index 0000000000..250bda0eec --- /dev/null +++ b/usr/src/uts/common/sys/mtio.h @@ -0,0 +1,330 @@ +/* + * CDDL HEADER START + * + * The contents of this file are subject to the terms of the + * Common Development and Distribution License, Version 1.0 only + * (the "License"). You may not use this file except in compliance + * with the License. + * + * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE + * or http://www.opensolaris.org/os/licensing. + * See the License for the specific language governing permissions + * and limitations under the License. + * + * When distributing Covered Code, include this CDDL HEADER in each + * file and include the License file at usr/src/OPENSOLARIS.LICENSE. + * If applicable, add the following below this CDDL HEADER, with the + * fields enclosed by brackets "[]" replaced with your own identifying + * information: Portions Copyright [yyyy] [name of copyright owner] + * + * CDDL HEADER END + */ +/* + * Copyright 2002 Sun Microsystems, Inc. All rights reserved. + * Use is subject to license terms. + * + * Copyright (c) 1983-1989 by AT&T. + * All rights reserved. + */ + +/* + * Portions of this source code were derived from Berkeley 4.3 BSD + * under license from the Regents of the University of California. + */ + +#ifndef _SYS_MTIO_H +#define _SYS_MTIO_H + +#pragma ident "%Z%%M% %I% %E% SMI" + +#include <sys/types.h> + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * Structures and definitions for mag tape io control commands + */ + +/* + * structure for MTIOCTOP - mag tape op command + */ +struct mtop { + short mt_op; /* operations defined below */ + daddr_t mt_count; /* how many of them */ +}; + +#if defined(_SYSCALL32) +struct mtop32 { + short mt_op; /* operations defined below */ + daddr32_t mt_count; /* how many of them */ +}; +#endif /* _SYSCALL32 */ + + +/* + * values for mt_op + */ +#define MTWEOF 0 /* write an end-of-file record */ +#define MTFSF 1 /* forward space over file mark */ +#define MTBSF 2 /* backward space over file mark (1/2" only ) */ +#define MTFSR 3 /* forward space to inter-record gap */ +#define MTBSR 4 /* backward space to inter-record gap */ +#define MTREW 5 /* rewind */ +#define MTOFFL 6 /* rewind and put the drive offline */ +#define MTNOP 7 /* no operation, sets status only */ +#define MTRETEN 8 /* retension the tape (cartridge tape only) */ +#define MTERASE 9 /* erase the entire tape */ +#define MTEOM 10 /* position to end of media */ +#define MTNBSF 11 /* backward space file to BOF */ +#define MTSRSZ 12 /* set record size */ +#define MTGRSZ 13 /* get record size */ +#define MTLOAD 14 /* for loading a tape (use o_delay to open */ + /* the tape device) */ + +/* + * structure for MTIOCGET - mag tape get status command + */ +struct mtget { + short mt_type; /* type of magtape device */ + /* the following two registers are grossly device dependent */ + short mt_dsreg; /* ``drive status'' register */ + short mt_erreg; /* ``error'' register */ + /* optional error info. */ + daddr_t mt_resid; /* residual count */ + daddr_t mt_fileno; /* file number of current position */ + daddr_t mt_blkno; /* block number of current position */ + ushort_t mt_flags; + short mt_bf; /* optimum blocking factor */ +}; + +#if defined(_SYSCALL32) +struct mtget32 { + short mt_type; /* type of magtape device */ + /* the following two registers are grossly device dependent */ + short mt_dsreg; /* ``drive status'' register */ + short mt_erreg; /* ``error'' register */ + /* optional error info. */ + daddr32_t mt_resid; /* residual count */ + daddr32_t mt_fileno; /* file number of current position */ + daddr32_t mt_blkno; /* block number of current position */ + ushort_t mt_flags; + short mt_bf; /* optimum blocking factor */ +}; +#endif /* _SYSCALL32 */ + +#define MT_NDENSITIES 4 +#define MT_NSPEEDS 4 + +/* + * struct for MTIOCGETDRIVETYPE - get tape config data + */ +struct mtdrivetype { + char name[64]; /* Name, for debug */ + char vid[25]; /* Vendor id and model (product) id */ + char type; /* Drive type for driver */ + int bsize; /* Block size */ + int options; /* Drive options */ + int max_rretries; /* Max read retries */ + int max_wretries; /* Max write retries */ + uchar_t densities[MT_NDENSITIES]; /* density codes, low->hi */ + uchar_t default_density; /* Default density chosen */ + uchar_t speeds[MT_NSPEEDS]; /* speed codes, low->hi */ + ushort_t non_motion_timeout; /* Inquiry type commands */ + ushort_t io_timeout; /* io timeout. seconds */ + ushort_t rewind_timeout; /* rewind timeout. seconds */ + ushort_t space_timeout; /* space cmd timeout. seconds */ + ushort_t load_timeout; /* load tape time in seconds */ + ushort_t unload_timeout; /* Unload tape time in scounds */ + ushort_t erase_timeout; /* erase timeout. seconds */ +}; + + +struct mtdrivetype_request { + int size; + struct mtdrivetype *mtdtp; +}; + +#if defined(_SYSCALL32) +struct mtdrivetype_request32 { + int size; + caddr32_t mtdtp; +}; +#endif /* _SYSCALL32 */ + + +/* + * values for mt_flags + */ +#define MTF_SCSI 0x01 +#define MTF_REEL 0x02 +#define MTF_ASF 0x04 + +#define MTF_TAPE_HEAD_DIRTY 0x08 +#define MTF_TAPE_CLN_SUPPORTED 0x10 + +/* + * Constants for mt_type byte (these are somewhat obsolete) + */ +#define MT_ISTS 0x01 /* vax: unibus ts-11 */ +#define MT_ISHT 0x02 /* vax: massbus tu77, etc */ +#define MT_ISTM 0x03 /* vax: unibus tm-11 */ +#define MT_ISMT 0x04 /* vax: massbus tu78 */ +#define MT_ISUT 0x05 /* vax: unibus gcr */ +#define MT_ISCPC 0x06 /* sun: multibus cpc */ +#define MT_ISAR 0x07 /* sun: multibus archive */ +#define MT_ISSC 0x08 /* sun: SCSI archive */ +#define MT_ISSYSGEN11 0x10 /* sun: SCSI Sysgen, QIC-11 only */ +#define MT_ISSYSGEN 0x11 /* sun: SCSI Sysgen QIC-24/11 */ +#define MT_ISDEFAULT 0x12 /* sun: SCSI default CCS */ +#define MT_ISCCS3 0x13 /* sun: SCSI generic (unknown) CCS */ +#define MT_ISMT02 0x14 /* sun: SCSI Emulex MT02 */ +#define MT_ISVIPER1 0x15 /* sun: SCSI Archive QIC-150 Viper */ +#define MT_ISWANGTEK1 0x16 /* sun: SCSI Wangtek QIC-150 */ +#define MT_ISCCS7 0x17 /* sun: SCSI generic (unknown) CCS */ +#define MT_ISCCS8 0x18 /* sun: SCSI generic (unknown) CCS */ +#define MT_ISCCS9 0x19 /* sun: SCSI generic (unknown) CCS */ +#define MT_ISCCS11 0x1a /* sun: SCSI generic (unknown) CCS */ +#define MT_ISCCS12 0x1b /* sun: SCSI generic (unknown) CCS */ +#define MT_ISCCS13 0x1c /* sun: SCSI generic (unknown) CCS */ +#define MT_ISCCS14 0x1d /* sun: SCSI generic (unknown) CCS */ +#define MT_ISCCS15 0x1e /* sun: SCSI generic (unknown) CCS */ +#define MT_ISCCS16 0x1f /* sun: SCSI generic (unknown) CCS */ +#define MT_ISCDC 0x20 /* sun: SCSI CDC 1/2" cartridge */ +#define MT_ISFUJI 0x21 /* sun: SCSI Fujitsu 1/2" cartridge */ +#define MT_ISKENNEDY 0x22 /* sun: SCSI Kennedy 1/2" reel */ +#define MT_ISHP 0x23 /* sun: SCSI HP 1/2" reel */ +#define MT_ISSTC 0x24 /* sun: SCSI IBM STC 3490 */ +#define MT_ISANRITSU 0x25 /* nihon sun: Anritsu 1/2" reel */ +#define MT_ISCCS23 0x26 /* sun: SCSI generic 1/2" */ +#define MT_ISCCS24 0x27 /* sun: SCSI generic 1/2" */ +#define MT_ISEXABYTE 0x28 /* sun: SCSI Exabyte 8mm cartridge */ +#define MT_ISEXB8500 0x29 /* sun: SCSI Exabyte 8500 8mm cart */ +#define MT_ISWANGTHS 0x2a /* sun: SCSI Wangtek 6130HS RDAT */ +#define MT_ISWANGDAT 0x2b /* sun: SCSI WangDAT */ +#define MT_ISPYTHON 0x2c /* sun: SCSI Archive Python DAT */ +#define MT_ISCCS28 0x2d /* sun: SCSI generic DAT CCS */ +#define MT_ISCCS29 0x2e /* sun: SCSI generic (unknown) CCS */ +#define MT_ISCCS30 0x2f /* sun: SCSI generic (unknown) CCS */ +#define MT_ISCCS31 0x30 /* sun: SCSI generic (unknown) CCS */ +#define MT_ISCCS32 0x31 /* sun: SCSI generic (unknown) CCS */ + + +/* + * these are recommended + */ +#define MT_ISQIC 0x32 /* generic QIC tape drive */ +#define MT_ISREEL 0x33 /* generic reel tape drive */ +#define MT_ISDAT 0x34 /* generic DAT tape drive */ +#define MT_IS8MM 0x35 /* generic 8mm tape drive */ +#define MT_ISOTHER 0x36 /* generic other type of tape drive */ + +/* more Sun devices */ +#define MT_ISTAND25G 0x37 /* sun: SCSI Tandberg 2.5 Gig QIC */ +#define MT_ISDLT 0x38 /* sun: SCSI DLT tape drive */ +#define MT_ISSTK9840 0x39 /* sun: STK 9840, 9940, 9840B */ +#define MT_ISBMDLT1 0x3a /* sun: Benchmark DLT1 */ +#define MT_LTO 0x3b /* sun: LTO,s by Hp, Seagate, IBM .. */ + +/* + * Device table structure and data for looking tape name from + * tape id number. Used by mt.c. + */ +struct mt_tape_info { + short t_type; /* type of magtape device */ + char *t_name; /* printing name */ + char *t_dsbits; /* "drive status" register */ + char *t_erbits; /* "error" register */ +}; + +/* + * this table is now obsolete, use MTIOCGETDRIVETYPE ioctl + * + * WARNING: this table will be eliminated in some future release + */ +#define MT_TAPE_INFO {\ +{ MT_ISSYSGEN11, "Sysgen QIC-11", 0, 0 }, \ +{ MT_ISSYSGEN, "Sysgen QIC-24", 0, 0 }, \ +{ MT_ISMT02, "Emulex MT-02 QIC-24", 0, 0 }, \ +{ MT_ISVIPER1, "Archive QIC-150", 0, 0 }, \ +{ MT_ISWANGTEK1, "Wangtek QIC-150", 0, 0 }, \ +{ MT_ISKENNEDY, "Kennedy 9612 1/2-inch", 0, 0 }, \ +{ MT_ISANRITSU, "Anritsu 1/2-inch", 0, 0 }, \ +{ MT_ISHP, "HP 88780 1/2-inch", 0, 0 }, \ +{ MT_ISEXABYTE, "Exabyte EXB-8200 8mm", 0, 0 }, \ +{ MT_ISEXB8500, "Exabyte EXB-8500 8mm", 0, 0 }, \ +{ MT_ISWANGDAT, "WangDAT 3.81mm", 0, 0 }, \ +{ MT_ISWANGTHS, "Wangtek 4mm RDAT", 0, 0 }, \ +{ MT_ISPYTHON, "Archive Python 4mm Helical Scan", 0, 0 }, \ +{ MT_ISSTC, "STC 1/2\" Cartridge", 0, 0}, \ +{ MT_ISTAND25G, "Tandberg 2.5 Gig QIC", 0, 0}, \ +{ MT_ISQIC, "QIC", 0, 0}, \ +{ MT_ISREEL, "REEL", 0, 0}, \ +{ MT_ISDAT, "DAT", 0, 0}, \ +{ MT_IS8MM, "8mm", 0, 0}, \ +{ MT_ISOTHER, "Other", 0, 0}, \ +{ 0 } \ +} + +/* mag tape io control commands */ +#define MTIOC ('m'<<8) +#define MTIOCTOP (MTIOC|1) /* do a mag tape op */ +#define MTIOCGET (MTIOC|2) /* get tape status */ +#define MTIOCGETDRIVETYPE (MTIOC|3) /* get tape config data */ +#define MTIOCPERSISTENT (MTIOC|4) /* turn on persistent errors */ +#define MTIOCPERSISTENTSTATUS (MTIOC|5) /* query persis. err status */ +#define MTIOCLRERR (MTIOC|6) /* clear a persitent error */ +#define MTIOCGUARANTEEDORDER (MTIOC|7) /* check for guaranteed order */ +#define MTIOCRESERVE (MTIOC|8) /* preserve reserve */ +#define MTIOCRELEASE (MTIOC|9) /* turnoff preserve reserve */ +#define MTIOCFORCERESERVE (MTIOC|10) /* break reservation drive */ + +#define MTIOCSTATE (MTIOC|13) /* Inquire insert/eject state */ + +#define MTIOCREADIGNOREILI (MTIOC|14) /* Enable/Disable ILI */ +#define MTIOCREADIGNOREEOFS (MTIOC|15) /* Enable/Disable Ignore EOF */ +#define MTIOCSHORTFMK (MTIOC|16) /* Enable/Disable Short FMK */ + +/* + * This state enum is the argument passed to the MTIOCSTATE ioctl. + */ +enum mtio_state { MTIO_NONE, MTIO_EJECTED, MTIO_INSERTED }; + +#ifndef KERNEL +/* + * don't use DEFTAPE. + */ +#define DEFTAPE "/dev/rmt/0" +#endif + +/* + * Layout of minor device byte + * 15 - 8 7 6 5 4 3 2 1 0 + * -------------------------------------------- + * | | | | | | | | |----| Unit #. lower 2 bits + * | | | | | | | |---------- No rewind on close bit.... + * | | | | | |----|--------------- Density Select + * | | | | |------------------------- Resrvd.(add. campus dens. bit) + * | | | |------------------------------ BSD behavior + * |----|----|----------------------------------- Unit # bit 2-6 + */ + +#define MTUNIT(dev) (((getminor(dev) & 0xff80) >> 5) + \ + (getminor(dev) & 0x3)) +#define MT_NOREWIND (1 <<2) +#define MT_DENSITY_MASK (3 <<3) +#define MT_DENSITY1 (0 <<3) /* Lowest density/format */ +#define MT_DENSITY2 (1 <<3) +#define MT_DENSITY3 (2 <<3) +#define MT_DENSITY4 (3 <<3) /* Highest density/format */ +#define MTMINOR(unit) (((unit & 0x7fc) << 5) + (unit & 0x3)) +#define MT_BSD (1 <<6) /* BSD behavior on close */ +#define MT_DENSITY(dev) ((getminor(dev) & MT_DENSITY_MASK) >> 3) + + +#ifdef __cplusplus +} +#endif + +#endif /* _SYS_MTIO_H */ |