PSARC 2009/334 EOF of legacy bus mice

PSARC 2009/341 remove mscsi
6848113 busmice (msm and logi) should be removed
6848112 remove mscsi

--HG--
rename : usr/src/uts/common/sys/vuidmice.h => usr/src/uts/common/io/vuidmice/vuidmice.h

1 files changed, 0 insertions, 677 deletions

diff --git a/usr/src/uts/intel/io/msm.c b/usr/src/uts/intel/io/msm.c
deleted file mode 100644
index d7f2d2b5c9..0000000000
--- a/usr/src/uts/intel/io/msm.c
+++ /dev/null
@@ -1,677 +0,0 @@
-/*
- * CDDL HEADER START
- *
- * The contents of this file are subject to the terms of the
- * Common Development and Distribution License (the "License").
- * You may not use this file except in compliance with the License.
- *
- * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
- * or http://www.opensolaris.org/os/licensing.
- * See the License for the specific language governing permissions
- * and limitations under the License.
- *
- * When distributing Covered Code, include this CDDL HEADER in each
- * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
- * If applicable, add the following below this CDDL HEADER, with the
- * fields enclosed by brackets "[]" replaced with your own identifying
- * information: Portions Copyright [yyyy] [name of copyright owner]
- *
- * CDDL HEADER END
- */
-/*
- * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
- * Use is subject to license terms.
- */
-
-/*
- * Microsoft Bus Mouse Module - Streams
- */
-
-#include "sys/param.h"
-#include "sys/types.h"
-#include "sys/kmem.h"
-#include "sys/signal.h"
-#include "sys/errno.h"
-#include "sys/file.h"
-#include "sys/termio.h"
-#include "sys/stream.h"
-#include "sys/stropts.h"
-#include "sys/strtty.h"
-#include "sys/debug.h"
-#include "sys/ddi.h"
-#include "sys/cred.h"
-#include <sys/stat.h>
-#include <sys/modctl.h>
-#include <sys/sunddi.h>
-#include "sys/proc.h"
-#include "sys/cmn_err.h"
-#include "sys/mouse.h"
-#include "sys/mse.h"
-
-#define	PRF	printf
-
-
-/*
- *
- * Local Static Data
- *
- */
-#define	MSM_MAXUNIT	1
-#define	MSMUNIT(dev)	((dev) & 0xf)
-
-static dev_info_t *msmunits[MSM_MAXUNIT];
-
-static struct driver_minor_data {
-	char	*name;
-	int	minor;
-	int	type;
-} msm_minor_data[] = {
-	{"l", 0, S_IFCHR},
-	{0}
-};
-int msmdevflag = 0;
-int msm_debug = 0;
-
-
-/*
- * static struct strmseinfo *msmptr = 0;
- */
-
-static char mousepresent;
-static char mouseinuse;
-static char mousemode;
-static char mousestatus;
-static int xmotion, ymotion;
-int	mouse_base = 0x23c;
-
-
-static uint_t msmintr(caddr_t arg);
-static int msmopen(queue_t *q, dev_t *devp, int flag, int sflag,
-    struct cred *cred_p);
-static int msmclose(queue_t *q, int flag, cred_t *cred_p);
-static int msm_wput(queue_t *q, mblk_t *mp);
-
-static int msminit(dev_info_t *dip);
-static int msminfo(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg,
-		void **result);
-static int msmprobe(dev_info_t *dev);
-static int msmattach(dev_info_t *dev, ddi_attach_cmd_t cmd);
-static int msmdetach(dev_info_t *dev, ddi_detach_cmd_t cmd);
-
-struct module_info	msmminfo = { 23, "msm", 0, INFPSZ, 256, 128};
-
-static struct qinit msm_rinit = {
-	NULL, NULL, msmopen, msmclose, NULL, &msmminfo, NULL};
-
-static struct qinit msm_winit = {
-	msm_wput, NULL, NULL, NULL, NULL, &msmminfo, NULL};
-
-struct streamtab msm_info = { &msm_rinit, &msm_winit, NULL, NULL};
-
-char	msmclosing = 0;
-static	int		xmotion,		/* current position and .. */
-			ymotion;		/*  button status, used .. */
-
-/*
- * Local Function Declarations
- */
-
-struct cb_ops	msm_cb_ops = {
-	nodev,			/* open */
-	nodev,			/* close */
-	nodev,			/* strategy */
-	nodev,			/* print */
-	nodev,			/* dump */
-	nodev,			/* read */
-	nodev,			/* write */
-	nodev,			/* ioctl */
-	nodev,			/* devmap */
-	nodev,			/* mmap */
-	nodev,			/* segmap */
-	nochpoll,		/* poll */
-	ddi_prop_op,		/* cb_prop_op */
-	(&msm_info),			/* streamtab  */
-	D_NEW | D_MP | D_MTPERMOD	/* Driver compatibility flag */
-
-};
-
-
-struct dev_ops	msm_ops = {
-
-	DEVO_REV,		/* devo_rev, */
-	0,			/* refcnt  */
-	msminfo,		/* info */
-	nulldev,		/* identify */
-	msmprobe,		/* probe */
-	msmattach,		/* attach */
-	msmdetach,		/* detach */
-	nodev,			/* reset */
-	&msm_cb_ops,		/* driver operations */
-	(struct bus_ops *)0,	/* bus operations */
-	NULL,			/* power */
-	ddi_quiesce_not_supported,	/* devo_quiesce */
-};
-
-/*
- * Module linkage information for the kernel.
- */
-
-static struct modldrv modldrv = {
-	&mod_driverops, /* Type of module.  This one is a driver */
-	"Microsoft Mouse driver",
-	&msm_ops,	/* driver ops */
-};
-
-static struct modlinkage modlinkage = {
-	MODREV_1,
-	&modldrv,
-	NULL
-};
-
-
-
-/*
- * This is the driver initialization routine.
- */
-int
-_init(void)
-{
-	int	rv;
-
-	rv = mod_install(&modlinkage);
-	return (rv);
-}
-
-
-#ifdef SUNDEV
-int
-_fini(void)
-{
-	return (EBUSY);
-}
-#else
-int
-_fini(void)
-{
-	return (mod_remove(&modlinkage));
-}
-
-
-extern struct modctl *mod_getctl();
-extern char *kobj_getmodname();
-
-#endif
-
-int
-_info(struct modinfo *modinfop)
-{
-	return (mod_info(&modlinkage, modinfop));
-}
-
-
-static int
-msmprobe(dev_info_t *dip)
-{
-	int 	unit;
-
-#ifdef MSM_DEBUG
-	if (msm_debug) {
-		PRF("msmprobe: entry\n");
-	}
-#endif
-
-	unit = ddi_get_instance(dip);
-#ifdef MSM_DEBUG
-	if (msm_debug)
-		PRF("unit is %x\n", unit);
-#endif
-	if (unit >= MSM_MAXUNIT || msmunits[unit])
-		return (DDI_PROBE_FAILURE);
-
-	return (msminit(dip));
-
-}
-
-/*ARGSUSED*/
-static int
-msmattach(dev_info_t *dip, ddi_attach_cmd_t cmd)
-{
-	int unit;
-	struct driver_minor_data *dmdp;
-	struct strmseinfo *msmptr = 0;
-
-#ifdef MSM_DEBUG
-	if (msm_debug) {
-		PRF("msmattach entry\n");
-	}
-#endif
-
-	if (cmd != DDI_ATTACH)
-		return (DDI_FAILURE);
-
-	unit = ddi_get_instance(dip);
-
-	for (dmdp = msm_minor_data; dmdp->name != NULL; dmdp++) {
-		if (ddi_create_minor_node(dip, dmdp->name, dmdp->type,
-		    dmdp->minor, DDI_PSEUDO, NULL) == DDI_FAILURE) {
-
-			ddi_remove_minor_node(dip, NULL);
-			ddi_prop_remove_all(dip);
-#ifdef MSM_DEBUG
-			if (msm_debug)
-				PRF("msmattach:"
-				    " ddi_create_minor_node failed\n");
-#endif
-			return (DDI_FAILURE);
-		}
-	}
-	msmunits[unit] = dip;
-
-	/* allocate and initialize state structure */
-	msmptr = kmem_zalloc(sizeof (struct strmseinfo), KM_SLEEP);
-	msmptr->state = 0;	/* not opened */
-	ddi_set_driver_private(dip, msmptr);
-
-	if (ddi_add_intr(dip, (uint_t)0, &msmptr->iblock,
-	    (ddi_idevice_cookie_t *)0, msmintr, (caddr_t)msmptr)
-	    != DDI_SUCCESS) {
-#ifdef MSM_DEBUG
-		if (msm_debug)
-			PRF("msmattach: ddi_add_intr failed\n");
-#endif
-		cmn_err(CE_WARN, "msm: cannot add intr\n");
-		return (DDI_FAILURE);
-	}
-	mutex_init(&msmptr->lock, NULL, MUTEX_DRIVER, (void *)msmptr->iblock);
-	ddi_report_dev(dip);
-	return (DDI_SUCCESS);
-}
-
-/*
- * msmdetach:
- */
-/*ARGSUSED*/
-static int
-msmdetach(dev_info_t *dip, ddi_detach_cmd_t cmd)
-{
-	dev_info_t	*ldevi;
-	struct strmseinfo *msmptr;
-	int instance;
-
-	switch (cmd) {
-
-	case DDI_DETACH:
-
-		/*
-		 * check if every instance can be unloaded before actually
-		 * starting to unload this one; this prevents the needless
-		 * detach/re-attach sequence
-		 */
-		for (instance = 0; instance < MSM_MAXUNIT; instance++) {
-			if (((ldevi = msmunits[instance]) == NULL) ||
-			    !(msmptr = ddi_get_driver_private(ldevi))) {
-				continue;
-			}
-		}
-
-/*
- * 		Undo what we did in msmattach & msmprobe, freeing resources
- * 		and removing things we installed.  The system
- * 		framework guarantees we are not active with this devinfo
- * 		node in any other entry points at this time.
- */
-		instance = ddi_get_instance(dip);
-		if ((instance >= MSM_MAXUNIT) ||
-		    !(msmptr = ddi_get_driver_private(dip)))
-			return (DDI_FAILURE);
-
-		msmunits[instance] = 0;
-		ddi_prop_remove_all(dip);
-		ddi_remove_minor_node(dip, NULL);
-		mutex_destroy(&msmptr->lock);
-		ddi_remove_intr(dip, 0, msmptr->iblock);
-		kmem_free(msmptr, sizeof (struct strmseinfo));
-		return (DDI_SUCCESS);
-
-	default:
-#ifdef MSM_DEBUG
-		if (msm_debug) {
-			PRF("msmdetach: cmd = %d unknown\n", cmd);
-		}
-#endif
-		return (DDI_FAILURE);
-	}
-}
-
-
-/* ARGSUSED */
-static int
-msminfo(dev_info_t *dip, ddi_info_cmd_t infocmd, void *arg, void **result)
-{
-	dev_t dev = (dev_t)arg;
-	int unit;
-	dev_info_t *devi;
-
-#ifdef MSM_DEBUG
-	if (msm_debug)
-		PRF("msminfo: call\n");
-#endif
-	if ((unit = MSMUNIT(dev)) >= MSM_MAXUNIT ||
-	    (devi = msmunits[unit]) == NULL)
-		return (DDI_FAILURE);
-
-	switch (infocmd) {
-	case DDI_INFO_DEVT2DEVINFO:
-		*result = (void *)devi;
-		break;
-	case DDI_INFO_DEVT2INSTANCE:
-		*result = (void *)(uintptr_t)unit;
-		break;
-	default:
-		return (DDI_FAILURE);
-	}
-	return (DDI_SUCCESS);
-}
-
-
-static int
-msminit(dev_info_t *dip)
-{
-	unsigned char   id1,
-	    id2;
-	int	ioaddr;
-	int	old_probe;
-
-
-#ifdef MSM_DEBUG
-	if (msm_debug)
-		PRF("msminit: call mouse_base = %x\n", mouse_base);
-#endif
-	old_probe = ddi_getprop(DDI_DEV_T_ANY, dip, 0,
-	    "ignore-hardware-nodes", 0);
-
-	if (old_probe) {
-		int	len = sizeof (int);
-
-		/*
-		 * Check if ioaddr is set in .conf file, it should be.  If it
-		 * isn't then try the default i/o addr
-		 */
-		if (ddi_prop_op(DDI_DEV_T_ANY, dip, PROP_LEN_AND_VAL_BUF,
-		    DDI_PROP_DONTPASS, "ioaddr", (caddr_t)&ioaddr,
-		    &len) == DDI_PROP_SUCCESS) {
-			mouse_base = ioaddr;
-		}
-	} else {
-		int reglen, nregs;
-		int i;
-		struct {
-			int bustype;
-			int base;
-			int size;
-		} *reglist;
-
-		/* new probe */
-		if (ddi_getlongprop(DDI_DEV_T_ANY, dip, DDI_PROP_DONTPASS,
-		    "reg", (caddr_t)&reglist, &reglen) != DDI_PROP_SUCCESS)
-			return (DDI_PROBE_FAILURE);
-		nregs = reglen / sizeof (*reglist);
-		for (i = 0; i < nregs; i++)
-			if (reglist[i].bustype == 1) {
-				ioaddr = reglist[i].base;
-				mouse_base = ioaddr;
-				break;
-			}
-		kmem_free(reglist, reglen);
-	}
-
-	/*
-	 * Try reading the InPort identification register.  It should
-	 * alternate between a signature and a version number.
-	 */
-	id1 = inb(mouse_base + IDENTREG);
-	id2 = inb(mouse_base + IDENTREG);
-	if (id1 != id2 && (id1 == SIGN || id2 == SIGN))
-		mousepresent = 1;
-	else
-		return (DDI_PROBE_FAILURE);
-
-	/* Reset the mouse to make sure it does not interrupt */
-	outb(mouse_base + ADDRREG, RESET | MODE);
-
-#ifdef MSM_DEBUG
-	if (msm_debug)
-		PRF("msminit: succeeded\n");
-#endif
-	return (DDI_SUCCESS);
-}
-
-/*ARGSUSED2*/
-static int
-msmopen(queue_t *q, dev_t *devp, int flag, int sflag,
-    struct cred *cred_p)
-{
-	struct strmseinfo *msmptr;
-	dev_info_t *dip;
-	int unit;
-#ifdef MSM_DEBUG
-	if (msm_debug)
-		printf("msmopen:entered\n");
-#endif
-	if (((unit = MSMUNIT(*devp)) >= MSM_MAXUNIT) ||
-	    (dip = msmunits[unit]) == NULL)
-		return (DDI_FAILURE);
-
-	if (mousepresent == 0) {
-		return (EIO);
-	}
-	if (mouseinuse) {
-		return (EBUSY);
-	}
-
-	if (!(msmptr = ddi_get_driver_private(dip)))
-
-		if (q->q_ptr != NULL) {
-#ifdef MSM_DEBUG
-			if (msm_debug)
-				printf("msmopen:already open\n");
-#endif
-			return (0);		/* already attached */
-		}
-
-	mutex_enter(&msmptr->lock);
-
-	q->q_ptr = (caddr_t)msmptr;
-	WR(q)->q_ptr = (caddr_t)msmptr;
-	msmptr->rqp = q;
-	msmptr->wqp = WR(q);
-	qprocson(q);
-
-#ifdef MSM_DEBUG
-	if (msm_debug)
-		printf("msmopen:leaving\n");
-#endif
-	mouseinuse = 1;
-	xmotion = ymotion = 0;
-	mousestatus = 0;
-
-	/* Set appropriate modes for mouse and enable interrupts */
-	mousemode = HZ30 | DATAINT | QUADMODE;
-	outb(mouse_base + ADDRREG, MODE);
-	outb(mouse_base + DATAREG, mousemode);
-	mutex_exit(&msmptr->lock);
-	return (0);
-}
-
-
-/*ARGSUSED1*/
-static int
-msmclose(queue_t *q, int flag, cred_t *cred_p)
-{
-	struct strmseinfo *msmptr;
-
-	qprocsoff(q);
-#ifdef MSM_DEBUG
-	if (msm_debug)
-		printf("msmclose:entered\n");
-#endif
-	msmptr = q->q_ptr;
-	mutex_enter(&msmptr->lock);
-	q->q_ptr = (caddr_t)NULL;
-	WR(q)->q_ptr = (caddr_t)NULL;
-	msmptr->rqp = NULL;
-	msmptr->wqp = NULL;
-	/*
-	 * Use to reset the mouse to make sure it does not interrupt
-	 * Now just turn off interrupts, as ATI VGA Wonder XL24
-	 * appeared to get in a mode where it thought an interrupt was
-	 * delivered, and wouldn't deliver any more after this was done.
-	 */
-	mousemode = 0;
-	outb(mouse_base + ADDRREG, MODE);
-	outb(mouse_base + DATAREG, mousemode);
-	mouseinuse = 0;
-
-#ifdef MSM_DEBUG
-	if (msm_debug)
-		printf("msmclose:leaving\n");
-#endif
-	mutex_exit(&msmptr->lock);
-	return (0);
-}
-
-static int
-msm_wput(queue_t *q, mblk_t *mp)
-{
-	struct iocblk *iocbp;
-	struct strmseinfo *msmptr;
-
-#ifdef MSM_DEBUG
-	if (msm_debug)
-		printf("msm_wput:entered\n");
-#endif
-	msmptr = q->q_ptr;
-	if (msmptr == 0) {
-		freemsg(mp);
-#ifdef MSM_DEBUG
-		if (msm_debug)
-			printf("msm_wput:msmptr == NULL\n");
-#endif
-		return (0);
-	}
-	iocbp = (struct iocblk *)mp->b_rptr;
-	switch (mp->b_datap->db_type) {
-		case M_FLUSH:
-#ifdef MSM_DEBUG
-			if (msm_debug)
-				printf("msm_wput:M_FLUSH\n");
-#endif
-			if (*mp->b_rptr & FLUSHW)
-				flushq(q, FLUSHDATA);
-			qreply(q, mp);
-			break;
-		case M_IOCTL:
-#ifdef MSM_DEBUG
-			if (msm_debug)
-				printf("msm_wput:M_IOCTL\n");
-#endif
-			mp->b_datap->db_type = M_IOCNAK;
-			iocbp->ioc_rval = 0;
-			iocbp->ioc_error = EINVAL;
-			qreply(q, mp);
-			break;
-		case M_IOCDATA:
-#ifdef MSM_DEBUG
-			if (msm_debug)
-				printf("msm_wput:M_IOCDATA\n");
-#endif
-			mp->b_datap->db_type = M_IOCNAK;
-			iocbp->ioc_rval = 0;
-			iocbp->ioc_error = EINVAL;
-			qreply(q, mp);
-			break;
-		default:
-			freemsg(mp);
-			break;
-	}
-#ifdef MSM_DEBUG
-	if (msm_debug)
-		printf("msm_wput:leaving\n");
-#endif
-	return (0);
-}
-
-static uint_t
-msmintr(caddr_t arg)
-{
-	char    status,
-	    x,
-	    y;
-
-	struct strmseinfo *qp = (struct strmseinfo *)arg;
-	mblk_t *bp;
-
-#ifdef MSM_DEBUG
-	if (msm_debug > 5)
-		PRF("msmintr:\n");
-#endif
-
-	if (!qp || (qp->rqp == NULL)) {
-		return (DDI_INTR_UNCLAIMED);
-	}
-	mutex_enter(&qp->lock);
-	if (!mouseinuse) {
-		mutex_exit(&qp->lock);
-		return (DDI_INTR_UNCLAIMED);
-	}
-	/* Select mode register and turn on the HOLD data bit */
-	outb(mouse_base + ADDRREG, MODE);
-	outb(mouse_base + DATAREG, mousemode + HOLD);
-
-	/* Select and read the status register */
-	outb(mouse_base + ADDRREG, MSTATUS);
-	status = inb(mouse_base + DATAREG);
-
-	/* if mouse moved, save the motion */
-	if (status & MOVEMENT) {
-		outb(mouse_base + ADDRREG, DATA1);
-		x = inb(mouse_base + DATAREG);
-		xmotion += x;
-		outb(mouse_base + ADDRREG, DATA2);
-		y = inb(mouse_base + DATAREG);
-		ymotion += y;
-	} else
-		x = y = 0;
-	mousestatus = status | (mousestatus & ~BUTSTATMASK);
-
-	/* Select mode register and turn off the HOLD data bit */
-	outb(mouse_base + ADDRREG, MODE);
-	outb(mouse_base + DATAREG, mousemode);
-
-	if (status & (MOVEMENT | BUTCHNGMASK)) {
-		char c;
-
-		c = (char)0x80;			/* MSC sync value */
-
-		if ((status & BUT1STAT) == 0)	/* button NOT pressed */
-			c |= 0x04;		/* left button up */
-		if ((status & BUT2STAT) == 0)	/* button NOT pressed */
-			c |= 0x02;		/* middle button up */
-		if ((status & BUT3STAT) == 0)	/* button NOT pressed */
-			c |= 0x01;		/* right button up */
-
-		if ((bp = allocb(5, BPRI_MED)) == NULL) {
-			mutex_exit(&qp->lock);
-			return (DDI_INTR_UNCLAIMED);
-		}
-		*(bp->b_wptr)++ = c;	/* sync */
-		*(bp->b_wptr)++ = x;	/* x coordinate */
-		*(bp->b_wptr)++ = -y;  	/* y coordinate */
-		*(bp->b_wptr)++ = 0;	/* delta x */
-		*(bp->b_wptr)++ = 0;	/* delta y */
-		putnext(qp->rqp, bp);
-
-	}
-	mutex_exit(&qp->lock);
-	return (DDI_INTR_UNCLAIMED);
-}