diff options
Diffstat (limited to 'usr/src/uts/common/smbsrv/smb.h')
| -rw-r--r-- | usr/src/uts/common/smbsrv/smb.h | 1372 |
1 files changed, 1221 insertions, 151 deletions
diff --git a/usr/src/uts/common/smbsrv/smb.h b/usr/src/uts/common/smbsrv/smb.h index 1214f041d7..af502643e6 100644 --- a/usr/src/uts/common/smbsrv/smb.h +++ b/usr/src/uts/common/smbsrv/smb.h @@ -19,43 +19,41 @@ * CDDL HEADER END */ /* - * Copyright 2007 Sun Microsystems, Inc. All rights reserved. + * Copyright 2009 Sun Microsystems, Inc. All rights reserved. * Use is subject to license terms. */ #ifndef _SMBSRV_SMB_H #define _SMBSRV_SMB_H -/* - * SMB definitions and interfaces, mostly defined in the CIFS spec. - */ - -#pragma ident "%Z%%M% %I% %E% SMI" /* - * SMB definitions and interfaces, mostly defined in the CIFS spec. + * SMB definitions and interfaces, mostly defined in the SMB and CIFS specs. */ - #ifdef _KERNEL #include <sys/types.h> #endif -#include <smbsrv/smb_i18n.h> +#include <smbsrv/string.h> #include <smbsrv/msgbuf.h> +#include <smbsrv/ntstatus.h> +#include <smbsrv/nterror.h> +#include <smbsrv/doserror.h> +#include <smbsrv/ntaccess.h> -#ifdef __cplusplus -extern "C" { -#endif - +/* + * Macintosh Extensions for CIFS + */ +#include <smbsrv/mac_cifs.h> /* - * Typedefs from CIFS section 3.2 + * NT Installable File System (IFS) interface. */ -typedef unsigned char UCHAR; -typedef unsigned short USHORT; -typedef uint32_t ULONG; -typedef int32_t LONG; +#include <smbsrv/ntifs.h> +#ifdef __cplusplus +extern "C" { +#endif /* * The msgbuf format and length of an SMB header. @@ -65,6 +63,18 @@ typedef int32_t LONG; #define SMB_HEADER_LEN 32 #define SMB_SIG_SIZE 8 /* SMB signature size */ +#define SMB_HEADER_ED_FMT "Mbbbwbww8c2.wwww" +#define SMB_HEADER_ED_LEN (4+1+1+1+2+1+2+12+2+2+2+2) +#define SMB_TRANSHDR_ED_FMT "wwwwb.wl2.wwwwb." +#define SMB_TRANSHDR_ED_LEN (2+2+2+2+1+1+2+4+2+2+2+2+2+1+1) +#define SMB_TRANSSHDR_ED_FMT "wwwwwwwww" +#define SMB_TRANSSHDR_ED_LEN (2+2+2+2+2+2+2+2) +#define SMB_TRANS2SHDR_ED_FMT "wwwwwwwww" +#define SMB_TRANS2SHDR_ED_LEN (2+2+2+2+2+2+2+2+2) +/* There is something wrong with this. Should be 38 bytes. It is 37 bytes */ +#define SMB_NT_TRANSHDR_ED_FMT "b2.llllllllbw" +#define SMB_NT_TRANSHDR_ED_LEN (1+2+4+4+4+4+4+4+4+4+1+2) + /* * CIFS definition for the SMB header (CIFS Section 3.2). Note that the * pid_high field is not documented in the 1997 CIFS specificaction. This @@ -73,75 +83,43 @@ typedef int32_t LONG; * ready structure. */ typedef struct smb_hdr { - UCHAR protocol[4]; - UCHAR command; + uint8_t protocol[4]; + uint8_t command; union { struct { - UCHAR error_class; - UCHAR reserved; - USHORT error; + uint8_t error_class; + uint8_t reserved; + uint16_t error; } dos_error; - ULONG ntstatus; - }status; + uint32_t ntstatus; + } status; - UCHAR flags; - USHORT flags2; - USHORT pid_high; + uint8_t flags; + uint16_t flags2; + uint16_t pid_high; union { - USHORT pad[5]; + uint16_t pad[5]; struct { - USHORT reserved; - UCHAR security_sig[SMB_SIG_SIZE]; + uint16_t reserved; + uint8_t security_sig[SMB_SIG_SIZE]; } extra; } extra; - USHORT tid; - USHORT pid; - USHORT uid; - USHORT mid; + uint16_t tid; + uint16_t pid; + uint16_t uid; + uint16_t mid; } smb_hdr_t; - /* * Encoded or packed SMB header in network ready format. */ typedef struct smb_hdrbuf { - unsigned char hdr[SMB_HEADER_LEN]; + uint8_t hdr[SMB_HEADER_LEN]; } smb_hdrbuf_t; -typedef struct smb_nethdr { - uint8_t sh_protocol[4]; - uint8_t sh_command; - - union { - struct { - uint8_t sh_error_class; - uint8_t sh_reserved; - uint8_t sh_error[2]; - } dos_error; - uint8_t sh_ntstatus[4]; - } status; - - uint8_t sh_flags; - uint8_t sh_flags2[2]; - uint8_t sh_pid_high[2]; - - union { - uint8_t sh_pad[10]; - struct { - uint8_t sh_reserved[2]; - uint8_t sh_security_sig[SMB_SIG_SIZE]; - } extra; - } extra; - - uint8_t sh_tid[2]; - uint8_t sh_pid[2]; - uint8_t sh_uid[2]; - uint8_t sh_mid[2]; -} smb_nethdr_t; - /* * Protocol magic value as a 32-bit. This will be 0xff 0x53 0x4d 0x42 on * the wire. @@ -155,118 +133,1210 @@ typedef struct smb_nethdr { * month range is 1-12, and the day range is 1-31. */ typedef struct smb_date { - USHORT day : 5; - USHORT month : 4; - USHORT year : 7; + uint16_t day : 5; + uint16_t month : 4; + uint16_t year : 7; } smb_date_t; - /* * The hours range is 0-23, the minutes range is 0-59 and the two_sec * range is 0-29. */ typedef struct smb_time { - USHORT two_sec : 5; - USHORT minutes : 6; - USHORT hours : 5; + uint16_t two_sec : 5; + uint16_t minutes : 6; + uint16_t hours : 5; } smb_time_t; - /* * This is a 64-bit signed absolute time representing 100ns increments. * A positive value represents the absolute time since 1601AD. A * negative value represents a context specific relative time. */ typedef struct smb_time2 { - ULONG low_time; - LONG high_time; + uint32_t low_time; + int32_t high_time; } smb_time2_t; - /* * The number of seconds since Jan 1, 1970, 00:00:00.0. */ typedef uint32_t smb_utime_t; - #define SMB_LM_NEGOTIATE_WORDCNT 13 #define SMB_NT_NEGOTIATE_WORDCNT 17 +#define SMB_NAME83_EXTLEN 3 +#define SMB_NAME83_BASELEN 8 +#define SMB_NAME83_LEN 12 -typedef struct smb_nt_negotiate_rsp { - UCHAR word_count; - USHORT dialect_index; - UCHAR security_mode; - USHORT max_mpx; - USHORT max_vc; - ULONG max_buffer_size; - ULONG max_raw_size; - ULONG session_key; - ULONG capabilities; - ULONG time_low; - ULONG time_high; - USHORT server_tz; - UCHAR security_len; - USHORT byte_count; - UCHAR *guid; - UCHAR *challenge; - UCHAR *oem_domain; -} smb_nt_negotiate_rsp_t; - -/* - * SMB_COM_TRANSACTION - */ -typedef struct smb_transact_rsp { - UCHAR WordCount; /* Count of data bytes */ - /* value = 10 + SetupCount */ - USHORT TotalParamCount; /* Total parameter bytes being sent */ - USHORT TotalDataCount; /* Total data bytes being sent */ - USHORT Reserved; - USHORT ParamCount; /* Parameter bytes sent this buffer */ - USHORT ParamOffset; /* Offset (from hdr start) to params */ - USHORT ParamDisplacement; /* Displacement of these param bytes */ - USHORT DataCount; /* Data bytes sent this buffer */ - USHORT DataOffset; /* Offset (from hdr start) to data */ - USHORT DataDisplacement; /* Displacement of these data bytes */ - UCHAR SetupCount; /* Count of setup words */ - USHORT BCC; -#if 0 - UCHAR Reserved2; /* Reserved (pad above to word) */ - UCHAR Buffer[1]; /* Buffer containing: */ - USHORT Setup[]; /* Setup words (# = SetupWordCount) */ - USHORT ByteCount; /* Count of data bytes */ - UCHAR Pad[]; /* Pad to SHORT or LONG */ - UCHAR Params[]; /* Param. bytes (# = ParamCount) */ - UCHAR Pad1[]; /* Pad to SHORT or LONG */ - UCHAR Data[]; /* Data bytes (# = DataCount) */ -#endif -} smb_transact_rsp_t; - -/* - * SMBreadX - */ -typedef struct smb_read_andx_rsp { - UCHAR WordCount; - UCHAR AndXCmd; - UCHAR AndXReserved; - USHORT AndXOffset; - USHORT Remaining; - USHORT DataCompactionMode; - USHORT Reserved; - USHORT DataLength; - USHORT DataOffset; - ULONG DataLengthHigh; - USHORT Reserved2[3]; - USHORT ByteCount; -#if 0 - UCHAR Pad[]; - UCHAR Data[]; -#endif -} smb_read_andx_rsp_t; +/* Share types */ +#ifndef _SHARE_TYPES_DEFINED_ +#define _SHARE_TYPES_DEFINED_ +#define STYPE_DISKTREE 0x00000000 +#define STYPE_PRINTQ 0x00000001 +#define STYPE_DEVICE 0x00000002 +#define STYPE_IPC 0x00000003 +#define STYPE_MASK 0x0000000F +#define STYPE_DFS 0x00000064 +#define STYPE_HIDDEN 0x80000000 +#define STYPE_SPECIAL 0x80000000 +#endif /* _SHARE_TYPES_DEFINED_ */ + +#define STYPE_ISDSK(S) (((S) & STYPE_MASK) == STYPE_DISKTREE) +#define STYPE_ISPRN(S) (((S) & STYPE_MASK) == STYPE_PRINTQ) +#define STYPE_ISDEV(S) (((S) & STYPE_MASK) == STYPE_DEVICE) +#define STYPE_ISIPC(S) (((S) & STYPE_MASK) == STYPE_IPC) + +/* + * NtCreateAndX and NtTransactCreate creation flags: defined in CIFS + * section 4.2.2 + * + * Creation Flag Name Value Description + * ========================== ====== ================================== + * NT_CREATE_REQUEST_OPLOCK 0x02 Level I oplock requested + * NT_CREATE_REQUEST_OPBATCH 0x04 Batch oplock requested + * NT_CREATE_OPEN_TARGET_DIR 0x08 Target for open is a directory + */ +#define NT_CREATE_FLAG_REQUEST_OPLOCK 0x02 +#define NT_CREATE_FLAG_REQUEST_OPBATCH 0x04 +#define NT_CREATE_FLAG_OPEN_TARGET_DIR 0x08 + + +/* + * Define the filter flags for NtNotifyChangeDirectoryFile + */ +#define FILE_NOTIFY_CHANGE_FILE_NAME 0x00000001 +#define FILE_NOTIFY_CHANGE_DIR_NAME 0x00000002 +#define FILE_NOTIFY_CHANGE_NAME 0x00000003 +#define FILE_NOTIFY_CHANGE_ATTRIBUTES 0x00000004 +#define FILE_NOTIFY_CHANGE_SIZE 0x00000008 +#define FILE_NOTIFY_CHANGE_LAST_WRITE 0x00000010 +#define FILE_NOTIFY_CHANGE_LAST_ACCESS 0x00000020 +#define FILE_NOTIFY_CHANGE_CREATION 0x00000040 +#define FILE_NOTIFY_CHANGE_EA 0x00000080 +#define FILE_NOTIFY_CHANGE_SECURITY 0x00000100 +#define FILE_NOTIFY_CHANGE_STREAM_NAME 0x00000200 +#define FILE_NOTIFY_CHANGE_STREAM_SIZE 0x00000400 +#define FILE_NOTIFY_CHANGE_STREAM_WRITE 0x00000800 +#define FILE_NOTIFY_VALID_MASK 0x00000fff + + +/* + * Define the file action type codes for NtNotifyChangeDirectoryFile + */ +#define FILE_ACTION_ADDED 0x00000001 +#define FILE_ACTION_REMOVED 0x00000002 +#define FILE_ACTION_MODIFIED 0x00000003 +#define FILE_ACTION_RENAMED_OLD_NAME 0x00000004 +#define FILE_ACTION_RENAMED_NEW_NAME 0x00000005 +#define FILE_ACTION_ADDED_STREAM 0x00000006 +#define FILE_ACTION_REMOVED_STREAM 0x00000007 +#define FILE_ACTION_MODIFIED_STREAM 0x00000008 + + +/* Lock type flags */ +#define LOCKING_ANDX_NORMAL_LOCK 0x00 +#define LOCKING_ANDX_SHARED_LOCK 0x01 +#define LOCKING_ANDX_OPLOCK_RELEASE 0x02 +#define LOCKING_ANDX_CHANGE_LOCK_TYPE 0x04 +#define LOCKING_ANDX_CANCEL_LOCK 0x08 +#define LOCKING_ANDX_LARGE_FILES 0x10 + +#define SMB_COM_CREATE_DIRECTORY 0x00 +#define SMB_COM_DELETE_DIRECTORY 0x01 +#define SMB_COM_OPEN 0x02 +#define SMB_COM_CREATE 0x03 +#define SMB_COM_CLOSE 0x04 +#define SMB_COM_FLUSH 0x05 +#define SMB_COM_DELETE 0x06 +#define SMB_COM_RENAME 0x07 +#define SMB_COM_QUERY_INFORMATION 0x08 +#define SMB_COM_SET_INFORMATION 0x09 +#define SMB_COM_READ 0x0A +#define SMB_COM_WRITE 0x0B +#define SMB_COM_LOCK_BYTE_RANGE 0x0C +#define SMB_COM_UNLOCK_BYTE_RANGE 0x0D +#define SMB_COM_CREATE_TEMPORARY 0x0E +#define SMB_COM_CREATE_NEW 0x0F +#define SMB_COM_CHECK_DIRECTORY 0x10 +#define SMB_COM_PROCESS_EXIT 0x11 +#define SMB_COM_SEEK 0x12 +#define SMB_COM_LOCK_AND_READ 0x13 +#define SMB_COM_WRITE_AND_UNLOCK 0x14 + +#define SMB_COM_READ_RAW 0x1A +#define SMB_COM_READ_MPX 0x1B +#define SMB_COM_READ_MPX_SECONDARY 0x1C +#define SMB_COM_WRITE_RAW 0x1D +#define SMB_COM_WRITE_MPX 0x1E +#define SMB_COM_WRITE_MPX_SECONDARY 0x1F +#define SMB_COM_WRITE_COMPLETE 0x20 + +#define SMB_COM_SET_INFORMATION2 0x22 +#define SMB_COM_QUERY_INFORMATION2 0x23 +#define SMB_COM_LOCKING_ANDX 0x24 +#define SMB_COM_TRANSACTION 0x25 +#define SMB_COM_TRANSACTION_SECONDARY 0x26 +#define SMB_COM_IOCTL 0x27 +#define SMB_COM_IOCTL_SECONDARY 0x28 +#define SMB_COM_COPY 0x29 +#define SMB_COM_MOVE 0x2A +#define SMB_COM_ECHO 0x2B +#define SMB_COM_WRITE_AND_CLOSE 0x2C +#define SMB_COM_OPEN_ANDX 0x2D +#define SMB_COM_READ_ANDX 0x2E +#define SMB_COM_WRITE_ANDX 0x2F + +#define SMB_COM_CLOSE_AND_TREE_DISC 0x31 +#define SMB_COM_TRANSACTION2 0x32 +#define SMB_COM_TRANSACTION2_SECONDARY 0x33 +#define SMB_COM_FIND_CLOSE2 0x34 +#define SMB_COM_FIND_NOTIFY_CLOSE 0x35 + +#define SMB_COM_TREE_CONNECT 0x70 +#define SMB_COM_TREE_DISCONNECT 0x71 +#define SMB_COM_NEGOTIATE 0x72 +#define SMB_COM_SESSION_SETUP_ANDX 0x73 +#define SMB_COM_LOGOFF_ANDX 0x74 +#define SMB_COM_TREE_CONNECT_ANDX 0x75 + +#define SMB_COM_QUERY_INFORMATION_DISK 0x80 +#define SMB_COM_SEARCH 0x81 +#define SMB_COM_FIND 0x82 +#define SMB_COM_FIND_UNIQUE 0x83 +#define SMB_COM_FIND_CLOSE 0x84 + +#define SMB_COM_NT_TRANSACT 0xA0 +#define SMB_COM_NT_TRANSACT_SECONDARY 0xA1 +#define SMB_COM_NT_CREATE_ANDX 0xA2 +#define SMB_COM_NT_CANCEL 0xA4 + +#define SMB_COM_OPEN_PRINT_FILE 0xC0 +#define SMB_COM_WRITE_PRINT_FILE 0xC1 +#define SMB_COM_CLOSE_PRINT_FILE 0xC2 +#define SMB_COM_GET_PRINT_QUEUE 0xC3 + + +/* + * Flags field of the SMB header. The names in parenthesis represent + * alternative names for the flags. + * + * SMB_FLAGS_LOCK_AND_READ_OK If the server supports LockAndRead and + * (SMB_FLAGS_LOCKS_SUBDIALECT) WriteAndUnlock, it sets this bit in the + * Negotiate response. + * + * SMB_FLAGS_SEND_NO_ACK When on, the client guarantees that there + * (SMB_FLAGS_RCV_BUF_POSTED) is a receive buffer posted such that a + * "Send-No-Ack" can be used by the server + * to respond to the client's request. + * + * SMB_FLAGS_CASE_INSENSITIVE This is part of the Flags field of every + * SMB header. If this bit is set, then all + * pathnames in the SMB should be treated as + * case-insensitive. Otherwise pathnames are + * case-sensitive. + * + * SMB_FLAGS_CANONICALIZED_PATHS When on in SessionSetupX, this indicates + * that all paths sent to the server are + * already in OS/2 canonicalized format. + * + * OS/2 canonical format means that file/directory names are in upper case, + * are valid characters, . and .. have been removed and single backslashes + * are used as separators. + * + * SMB_FLAGS_OPLOCK When set in an open file request SMBs + * (Open, Create, OpenX, etc.) this bit + * indicates a request for an oplock on the + * file. When set in the response, this bit + * indicates that the oplock was granted. + * + * SMB_FLAGS_OPLOCK_NOTIFY_ANY When on, this bit indicates that the server + * should notify the client on any request + * that could cause the file to be changed. + * If not set, the server only notifies the + * client on other open requests on the file. + * This bit is only relevant when + * SMB_FLAGS_OPLOCK is set. + * + * SMB_FLAGS_SERVER_TO_REDIR This bit indicates that the SMB is being + * (SMB_FLAGS_REPLY) sent from server to (client) redirector. + */ +#define SMB_FLAGS_LOCK_AND_READ_OK 0x01 +#define SMB_FLAGS_SEND_NO_ACK 0x02 +#define SMB_FLAGS_RESERVED 0x04 +#define SMB_FLAGS_CASE_INSENSITIVE 0x08 +#define SMB_FLAGS_CANONICALIZED_PATHS 0x10 +#define SMB_FLAGS_OPLOCK 0x20 +#define SMB_FLAGS_OPLOCK_NOTIFY_ANY 0x40 +#define SMB_FLAGS_REPLY 0x80 + + +/* + * Flags2 field of the SMB header. + */ +#define SMB_FLAGS2_KNOWS_LONG_NAMES 0x0001 +#define SMB_FLAGS2_KNOWS_EAS 0x0002 +#define SMB_FLAGS2_SMB_SECURITY_SIGNATURE 0x0004 +#define SMB_FLAGS2_IS_LONG_NAME 0x0040 +#define SMB_FLAGS2_REPARSE_PATH 0x0400 +#define SMB_FLAGS2_EXT_SEC 0x0800 +#define SMB_FLAGS2_DFS 0x1000 +#define SMB_FLAGS2_PAGING_IO 0x2000 +#define SMB_FLAGS2_NT_STATUS 0x4000 +#define SMB_FLAGS2_UNICODE 0x8000 + +#define DIALECT_UNKNOWN 0 +#define PC_NETWORK_PROGRAM_1_0 1 /* The original MSNET SMB protocol */ +#define PCLAN1_0 2 /* Some versions of the original MSNET */ +#define MICROSOFT_NETWORKS_1_03 3 /* This is used for the MS-NET 1.03 */ +#define MICROSOFT_NETWORKS_3_0 4 /* This is the DOS LANMAN 1.0 specific */ +#define LANMAN1_0 5 /* This is the first version of the full */ +#define LM1_2X002 6 /* This is the first version of the full */ +#define DOS_LM1_2X002 7 /* This is the dos equivalent of the */ +#define DOS_LANMAN2_1 8 /* DOS LANMAN2.1 */ +#define LANMAN2_1 9 /* OS/2 LANMAN2.1 */ +#define Windows_for_Workgroups_3_1a 10 /* Windows for Workgroups Version 1.0 */ +#define NT_LM_0_12 11 /* The SMB protocol designed for NT */ + +/* + * SMB_TREE_CONNECT_ANDX OptionalSupport flags + * + * SMB_SUPPORT_SEARCH_BITS The server supports SearchAttributes. + * SMB_SHARE_IS_IN_DFS The share is managed by DFS. + * SMB_CSC_MASK Offline-caching mask - see CSC values. + * SMB_UNIQUE_FILE_NAME The server uses long names and does not support + * short names. This indicates to clients that + * they may perform directory name-space caching. + * SMB_EXTENDED_SIGNATURES The server will use signing key protection. + * + * SMB_CSC_CACHE_MANUAL_REINT Clients are allowed to cache files for offline + * use as requested by users but automatic + * file-by-file reintegration is not allowed. + * SMB_CSC_CACHE_AUTO_REINT Clients are allowed to automatically cache + * files for offline use and file-by-file + * reintegration is allowed. + * SMB_CSC_CACHE_VDO Clients are allowed to automatically cache files + * for offline use, file-by-file reintegration is + * allowed and clients are permitted to work from + * their local cache even while offline. + * SMB_CSC_CACHE_NONE Client-side caching is disabled for this share. + * + * SHI1005_FLAGS_ACCESS_BASED_DIRECTORY_ENUM + * The server will filter directory entries based + * on the access permissions of the client. + */ +#define SMB_SUPPORT_SEARCH_BITS 0x0001 +#define SMB_SHARE_IS_IN_DFS 0x0002 +#define SMB_CSC_MASK 0x000C +#define SMB_UNIQUE_FILE_NAME 0x0010 +#define SMB_EXTENDED_SIGNATURES 0x0020 + +#define SMB_CSC_CACHE_MANUAL_REINT 0x0000 +#define SMB_CSC_CACHE_AUTO_REINT 0x0004 +#define SMB_CSC_CACHE_VDO 0x0008 +#define SMB_CSC_CACHE_NONE 0x000C + +#define SHI1005_FLAGS_ACCESS_BASED_DIRECTORY_ENUM 0x0800 + +/* + * The subcommand codes, placed in SETUP[0], for named pipe operations are: + * SubCommand Code Value Description + * =================== ===== ========================================= + */ + +#define CallNamedPipe 0x54 /* open/write/read/close pipe */ +#define WaitNamedPipe 0x53 /* wait for pipe to be nonbusy */ +#define PeekNmPipe 0x23 /* read but don't remove data */ +#define QNmPHandState 0x21 /* query pipe handle modes */ +#define SetNmPHandState 0x01 /* set pipe handle modes */ +#define QNmPipeInfo 0x22 /* query pipe attributes */ +#define TransactNmPipe 0x26 /* write/read operation on pipe */ +#define RawReadNmPipe 0x11 /* read pipe in "raw" (non message mode) */ +#define RawWriteNmPipe 0x31 /* write pipe "raw" (non message mode) */ + + + +/* + * Setup[0] Transaction2 Value Description + * Subcommand Code + * ========================== ===== ============================= + */ + +#define TRANS2_OPEN2 0x00 /* Create file, extended attributes */ +#define TRANS2_FIND_FIRST2 0x01 /* Begin search for files */ +#define TRANS2_FIND_NEXT2 0x02 /* Resume search for files */ +#define TRANS2_QUERY_FS_INFORMATION 0x03 /* Get file system information */ +#define _TRANS2_RESV_0x04 0x04 /* Reserved */ +#define TRANS2_QUERY_PATH_INFORMATION 0x05 /* Get info, named file or dir */ +#define TRANS2_SET_PATH_INFORMATION 0x06 /* Set info, named file or dir */ +#define TRANS2_QUERY_FILE_INFORMATION 0x07 /* Get info, handle */ +#define TRANS2_SET_FILE_INFORMATION 0x08 /* Set info, handle */ +#define TRANS2_FSCTL 0x09 /* Not implemented by NT server */ +#define TRANS2_IOCTL2 0x0A /* Not implemented by NT server */ +#define TRANS2_FIND_NOTIFY_FIRST 0x0B /* Not implemented by NT server */ +#define TRANS2_FIND_NOTIFY_NEXT 0x0C /* Not implemented by NT server */ +#define TRANS2_CREATE_DIRECTORY 0x0D /* Create dir, extended attributes */ +#define TRANS2_SESSION_SETUP 0x0E /* Session setup, extended security */ +#define TRANS2_GET_DFS_REFERRAL 0x10 /* Get a Dfs referral */ +#define TRANS2_REPORT_DFS_INCONSISTENCY 0x11 /* Report a Dfs inconsistency */ + +/* + * Access Mode Encoding (CIFS/1.0 1996 Section 3.8). + * + * The desired access mode passed in SmbOpen and SmbOpenAndX has the following + * mapping: + * + * 1111 11 + * 5432 1098 7654 3210 + * rWrC rLLL rSSS rAAA + * + * where: + * + * W - Write through mode. No read ahead or write behind allowed on + * this file or device. When protocol is returned, data is expected + * to be on the disk or device. + * + * S - Sharing mode: + * 0 - Compatibility mode (as in core open) + * 1 - Deny read/write/execute (exclusive) + * 2 - Deny write + * 3 - Deny read/execute + * 4 - Deny none + * + * A - Access mode + * 0 - Open for reading + * 1 - Open for writing + * 2 - Open for reading and writing + * 3 - Open for execute + * + * rSSSrAAA = 11111111 (hex FF) indicates FCB open (as in core protocol) + * + * C - Cache mode + * 0 - Normal file + * 1 - Do not cache this file + * + * L - Locality of reference + * 0 - Locality of reference is unknown + * 1 - Mainly sequential access + * 2 - Mainly random access + * 3 - Random access with some locality + * 4 to 7 - Currently undefined + */ + + +#define SMB_DA_SHARE_MASK 0x70 +#define SMB_DA_ACCESS_MASK 0x07 +#define SMB_DA_FCB_MASK (UCHAR)0xFF + +#define SMB_DA_ACCESS_READ 0x00 +#define SMB_DA_ACCESS_WRITE 0x01 +#define SMB_DA_ACCESS_READ_WRITE 0x02 +#define SMB_DA_ACCESS_EXECUTE 0x03 + +#define SMB_DA_SHARE_COMPATIBILITY 0x00 +#define SMB_DA_SHARE_EXCLUSIVE 0x10 +#define SMB_DA_SHARE_DENY_WRITE 0x20 +#define SMB_DA_SHARE_DENY_READ 0x30 +#define SMB_DA_SHARE_DENY_NONE 0x40 + +#define SMB_DA_FCB (UCHAR)0xFF + +#define SMB_CACHE_NORMAL 0x0000 +#define SMB_DO_NOT_CACHE 0x1000 + +#define SMB_LR_UNKNOWN 0x0000 +#define SMB_LR_SEQUENTIAL 0x0100 +#define SMB_LR_RANDOM 0x0200 +#define SMB_LR_RANDOM_WITH_LOCALITY 0x0300 +#define SMB_LR_MASK 0x0F00 + +#define SMB_DA_WRITE_THROUGH 0x4000 + +/* + * Macros used for share reservation rule checking + */ + +#define SMB_DENY_READ(share_access) ((share_access & FILE_SHARE_READ) == 0) + +#define SMB_DENY_WRITE(share_access) ((share_access & FILE_SHARE_WRITE) == 0) + +#define SMB_DENY_DELETE(share_access) ((share_access & FILE_SHARE_DELETE) == 0) + +#define SMB_DENY_RW(share_access) \ + ((share_access & (FILE_SHARE_READ | FILE_SHARE_WRITE)) == 0) + +#define SMB_DENY_ALL(share_access) (share_access == 0) + +#define SMB_DENY_NONE(share_access) (share_access == FILE_SHARE_ALL) + +/* + * The SMB open function determines what action should be taken depending + * on the existence or lack thereof of files used in the operation. It + * has the following mapping: + * + * 1111 1 + * 5432 1098 7654 3210 + * rrrr rrrr rrrC rrOO + * + * where: + * + * O - Open (action to be taken if the target file exists) + * 0 - Fail + * 1 - Open or Append file + * 2 - Truncate file + * + * C - Create (action to be taken if the target file does not exist) + * 0 - Fail + * 1 - Create file + */ + +#define SMB_OFUN_OPEN_MASK 0x3 +#define SMB_OFUN_CREATE_MASK 0x10 + +#define SMB_OFUN_OPEN_FAIL 0 +#define SMB_OFUN_OPEN_APPEND 1 +#define SMB_OFUN_OPEN_OPEN 1 +#define SMB_OFUN_OPEN_TRUNCATE 2 + +#define SMB_OFUN_CREATE_FAIL 0x00 +#define SMB_OFUN_CREATE_CREATE 0x10 + +/* + * The Action field of OpenAndX has the following format: + * + * 1111 11 + * 5432 1098 7654 3210 + * Lrrr rrrr rrrr rrOO + * + * where: + * + * L - Opportunistic lock. 1 if lock granted, else 0. + * + * O - Open action: + * 1 - The file existed and was opened + * 2 - The file did not exist but was created + * 3 - The file existed and was truncated + */ + +#define SMB_OACT_LOCK 0x8000 +#define SMB_OACT_OPENED 0x01 +#define SMB_OACT_CREATED 0x02 +#define SMB_OACT_TRUNCATED 0x03 + +#define SMB_OACT_OPLOCK 0x8000 + +#define SMB_FTYPE_DISK 0 +#define SMB_FTYPE_BYTE_PIPE 1 +#define SMB_FTYPE_MESG_PIPE 2 +#define SMB_FTYPE_PRINTER 3 +#define SMB_FTYPE_UNKNOWN 0xFFFF + +#define SMB_DEVST_BLOCKING 0x8000 +#define SMB_DEVST_ENDPOINT 0x4000 +#define SMB_DEVST_TYPE_MASK 0x0C00 +#define SMB_DEVST_TYPE_BYTE_PIPE 0x0000 +#define SMB_DEVST_TYPE_MESG_PIPE 0x0400 +#define SMB_DEVST_RMODE_MASK 0x0300 +#define SMB_DEVST_RMODE_BYTES 0x0000 +#define SMB_DEVST_RMODE_MESGS 0x0100 +#define SMB_DEVST_ICOUNT_MASK 0x00FF /* not used */ + +#define SMB_FTYPE_IS_DISK(F) ((F) == SMB_FTYPE_DISK) +#define SMB_FTYPE_IS_PIPE(F) \ + (((F) == SMB_FTYPE_BYTE_PIPE) || ((F) == SMB_FTYPE_MESG_PIPE)) +#define SMB_FTYPE_IS_PRINTER(F) ((F) == SMB_FTYPE_PRINTER) + +/* + * TRANS2_FIND + */ +#define SMB_FIND_FILE_DIRECTORY_INFO 0x101 +#define SMB_FIND_FILE_FULL_DIRECTORY_INFO 0x102 +#define SMB_FIND_FILE_NAMES_INFO 0x103 +#define SMB_FIND_FILE_BOTH_DIRECTORY_INFO 0x104 +#define SMB_FIND_FILE_ID_FULL_DIRECTORY_INFO 0x105 +#define SMB_FIND_FILE_ID_BOTH_DIRECTORY_INFO 0x106 +#define SMB_MAC_FIND_BOTH_HFS_INFO MAC_FIND_BOTH_HFS_INFO + + +/* + * Flags for TRANS2_FIND_FIRST2 and TRANS2_FIND_NEXT2 (NTDDK). + * + * If SMB_FIND_RETURN_RESUME_KEYS was set in the request parameters, + * each entry is preceded by a four-byte resume key. + */ +#define SMB_FIND_CLOSE_AFTER_REQUEST 0x01 +#define SMB_FIND_CLOSE_AT_EOS 0x02 +#define SMB_FIND_RETURN_RESUME_KEYS 0x04 +#define SMB_FIND_CONTINUE_FROM_LAST 0x08 +#define SMB_FIND_WITH_BACKUP_INTENT 0x10 + + +/* + * TRANS2_QUERY_FS_INFORMATION + */ +#define SMB_INFO_ALLOCATION 1 +#define SMB_INFO_VOLUME 2 +#define SMB_QUERY_FS_LABEL_INFO 0x101 +#define SMB_QUERY_FS_VOLUME_INFO 0x102 +#define SMB_QUERY_FS_SIZE_INFO 0x103 +#define SMB_QUERY_FS_DEVICE_INFO 0x104 +#define SMB_QUERY_FS_ATTRIBUTE_INFO 0x105 +#define SMB_QUERY_FS_QUOTA_INFO 0x106 /* unused? */ +#define SMB_QUERY_FS_CONTROL_INFO 0x107 +#define SMB_MAC_QUERY_FS_INFO MAC_QUERY_FS_INFO + + +/* + * Internal use only. + * Define information levels to represent the following requests: + * smb_query_information + * smb_query_information2 + * smb_set_information + * smb_set_information2 + */ +#define SMB_QUERY_INFORMATION 0x3001 +#define SMB_QUERY_INFORMATION2 0x3002 +#define SMB_SET_INFORMATION 0x3001 +#define SMB_SET_INFORMATION2 0x3002 + +/* TRANS2_QUERY_{PATH,FILE}_INFORMATION */ +#define SMB_INFO_STANDARD 1 /* query, set */ +#define SMB_INFO_QUERY_EA_SIZE 2 /* query */ +#define SMB_INFO_SET_EAS 2 /* set */ +#define SMB_INFO_QUERY_EAS_FROM_LIST 3 /* query */ +#define SMB_INFO_QUERY_ALL_EAS 4 /* query */ +#define SMB_INFO_QUERY_FULL_NAME 5 /* unused */ +#define SMB_INFO_IS_NAME_VALID 6 /* query */ + +#define SMB_QUERY_FILE_BASIC_INFO 0x101 +#define SMB_QUERY_FILE_STANDARD_INFO 0x102 +#define SMB_QUERY_FILE_EA_INFO 0x103 +#define SMB_QUERY_FILE_NAME_INFO 0x104 +#define SMB_QUERY_FILE_ALLOCATION_INFO 0x105 /* unused */ +#define SMB_QUERY_FILE_END_OF_FILE_INFO 0x106 /* unused */ +#define SMB_QUERY_FILE_ALL_INFO 0x107 +#define SMB_QUERY_FILE_ALT_NAME_INFO 0x108 +#define SMB_QUERY_FILE_STREAM_INFO 0x109 +#define SMB_QUERY_FILE_COMPRESSION_INFO 0x10B + +#define SMB_MAC_SET_FINDER_INFO MAC_SET_FINDER_INFO +#define SMB_MAC_DT_ADD_APPL MAC_DT_ADD_APPL +#define SMB_MAC_DT_REMOVE_APPL MAC_DT_REMOVE_APPL +#define SMB_MAC_DT_GET_APPL MAC_DT_GET_APPL +#define SMB_MAC_DT_GET_ICON MAC_DT_GET_ICON +#define SMB_MAC_DT_GET_ICON_INFO MAC_DT_GET_ICON_INFO +#define SMB_MAC_DT_ADD_ICON MAC_DT_ADD_ICON + +#define SMB_SET_FILE_BASIC_INFO 0x101 +#define SMB_SET_FILE_DISPOSITION_INFO 0x102 +#define SMB_SET_FILE_ALLOCATION_INFO 0x103 +#define SMB_SET_FILE_END_OF_FILE_INFO 0x104 + + +/* NT passthrough levels - see ntifs.h FILE_INFORMATION_CLASS */ +#define SMB_FILE_BASIC_INFORMATION 1004 +#define SMB_FILE_STANDARD_INFORMATION 1005 +#define SMB_FILE_INTERNAL_INFORMATION 1006 +#define SMB_FILE_EA_INFORMATION 1007 +#define SMB_FILE_ACCESS_INFORMATION 1008 +#define SMB_FILE_NAME_INFORMATION 1009 +#define SMB_FILE_RENAME_INFORMATION 1010 +#define SMB_FILE_LINK_INFORMATION 1011 +#define SMB_FILE_DISPOSITION_INFORMATION 1013 +#define SMB_FILE_ALL_INFORMATION 1018 +#define SMB_FILE_ALLOCATION_INFORMATION 1019 +#define SMB_FILE_END_OF_FILE_INFORMATION 1020 +#define SMB_FILE_ALT_NAME_INFORMATION 1021 +#define SMB_FILE_STREAM_INFORMATION 1022 +#define SMB_FILE_COMPRESSION_INFORMATION 1028 +#define SMB_FILE_ATTR_TAG_INFORMATION 1035 + +/* + * The following bits may be set in the SecurityMode field of the + * SMB_COM_NEGOTIATE response. + * + * Notes: + * NEGOTIATE_SECURITY_SHARE_LEVEL is a montana2 invention. + * + * The NTDDK definitions are: + * #define NEGOTIATE_USER_SECURITY 0x01 + * #define NEGOTIATE_ENCRYPT_PASSWORDS 0x02 + * #define NEGOTIATE_SECURITY_SIGNATURES_ENABLED 0x04 + * #define NEGOTIATE_SECURITY_SIGNATURES_REQUIRED 0x08 + */ +#define NEGOTIATE_SECURITY_SHARE_LEVEL 0x00 +#define NEGOTIATE_SECURITY_USER_LEVEL 0x01 +#define NEGOTIATE_SECURITY_CHALLENGE_RESPONSE 0x02 +#define NEGOTIATE_SECURITY_SIGNATURES_ENABLED 0x04 +#define NEGOTIATE_SECURITY_SIGNATURES_REQUIRED 0x08 + + +/* + * Negotiated Capabilities (CIFS/1.0 section 4.1.1) + * + * Capabilities allow the server to tell the client what it supports. + * Undefined bits MUST be set to zero by servers, and MUST be ignored + * by clients. The bit definitions are: + * + * Capability Name Encoding Meaning + * ==================== ======== ================================== + * CAP_RAW_MODE 0x0001 The server supports SMB_COM_READ_RAW and + * SMB_COM_WRITE_RAW (obsolescent) + * CAP_MPX_MODE 0x0002 The server supports SMB_COM_READ_MPX and + * SMB_COM_WRITE_MPX (obsolescent) + * CAP_UNICODE 0x0004 The server supports Unicode strings + * CAP_LARGE_FILES 0x0008 The server supports large files with 64 + * bit offsets + * CAP_NT_SMBS 0x0010 The server supports the SMBs particular + * to the NT LM 0.12 dialect. + * Implies CAP_NT_FIND. + * CAP_RPC_REMOTE_APIS 0x0020 The server supports remote admin API + * requests via DCE RPC + * CAP_STATUS32 0x0040 The server can respond with 32 bit + * status codes in Status.Status + * CAP_LEVEL_II_OPLOCKS 0x0080 The server supports level 2 oplocks + * CAP_LOCK_AND_READ 0x0100 The server supports the + * SMB_COM_LOCK_AND_READ SMB + * CAP_NT_FIND 0x0200 + * CAP_BULK_TRANSFER 0x0400 + * CAP_COMPRESSED_BULK 0x0800 + * CAP_DFS 0x1000 The server is DFS aware + * CAP_LARGE_READX 0x4000 The server supports large + * SMB_COM_READ_ANDX + * CAP_LARGE_WRITEX 0x8000 The server supports large + * SMB_COM_WRITE_ANDX + * CAP_RESERVED 0x02000000 Reserved for future use. + * CAP_EXTENDED_SECURITY 0x80000000 The server supports extended security + * exchanges. + * + * Extended security exchanges provides a means of supporting arbitrary + * authentication protocols within CIFS. Security blobs are opaque to the + * CIFS protocol; they are messages in some authentication protocol that + * has been agreed upon by client and server by some out of band mechanism, + * for which CIFS merely functions as a transport. When + * CAP_EXTENDED_SECURITY is negotiated, the server includes a first + * security blob in its response; subsequent security blobs are exchanged + * in SMB_COM_SESSION_SETUP_ANDX requests and responses until the + * authentication protocol terminates. + */ +#define CAP_RAW_MODE 0x0001 +#define CAP_MPX_MODE 0x0002 +#define CAP_UNICODE 0x0004 +#define CAP_LARGE_FILES 0x0008 +#define CAP_NT_SMBS 0x0010 +#define CAP_RPC_REMOTE_APIS 0x0020 +#define CAP_STATUS32 0x0040 +#define CAP_LEVEL_II_OPLOCKS 0x0080 +#define CAP_LOCK_AND_READ 0x0100 +#define CAP_NT_FIND 0x0200 +#define CAP_BULK_TRANSFER 0x0400 +#define CAP_COMPRESSED_BULK 0x0800 +#define CAP_DFS 0x1000 +#define CAP_LARGE_READX 0x4000 +#define CAP_LARGE_WRITEX 0x8000 +#define CAP_RESERVED 0x02000000 +#define CAP_EXTENDED_SECURITY 0x80000000 + + +/* + * Different device types according to NT + */ +#define FILE_DEVICE_BEEP 0x00000001 +#define FILE_DEVICE_CD_ROM 0x00000002 +#define FILE_DEVICE_CD_ROM_FILE_SYSTEM 0x00000003 +#define FILE_DEVICE_CONTROLLER 0x00000004 +#define FILE_DEVICE_DATALINK 0x00000005 +#define FILE_DEVICE_DFS 0x00000006 +#define FILE_DEVICE_DISK 0x00000007 +#define FILE_DEVICE_DISK_FILE_SYSTEM 0x00000008 +#define FILE_DEVICE_FILE_SYSTEM 0x00000009 +#define FILE_DEVICE_INPORT_PORT 0x0000000a +#define FILE_DEVICE_KEYBOARD 0x0000000b +#define FILE_DEVICE_MAILSLOT 0x0000000c +#define FILE_DEVICE_MIDI_IN 0x0000000d +#define FILE_DEVICE_MIDI_OUT 0x0000000e +#define FILE_DEVICE_MOUSE 0x0000000f +#define FILE_DEVICE_MULTI_UNC_PROVIDER 0x00000010 +#define FILE_DEVICE_NAMED_PIPE 0x00000011 +#define FILE_DEVICE_NETWORK 0x00000012 +#define FILE_DEVICE_NETWORK_BROWSER 0x00000013 +#define FILE_DEVICE_NETWORK_FILE_SYSTEM 0x00000014 +#define FILE_DEVICE_NULL 0x00000015 +#define FILE_DEVICE_PARALLEL_PORT 0x00000016 +#define FILE_DEVICE_PHYSICAL_NETCARD 0x00000017 +#define FILE_DEVICE_PRINTER 0x00000018 +#define FILE_DEVICE_SCANNER 0x00000019 +#define FILE_DEVICE_SERIAL_MOUSE_PORT 0x0000001a +#define FILE_DEVICE_SERIAL_PORT 0x0000001b +#define FILE_DEVICE_SCREEN 0x0000001c +#define FILE_DEVICE_SOUND 0x0000001d +#define FILE_DEVICE_STREAMS 0x0000001e +#define FILE_DEVICE_TAPE 0x0000001f +#define FILE_DEVICE_TAPE_FILE_SYSTEM 0x00000020 +#define FILE_DEVICE_TRANSPORT 0x00000021 +#define FILE_DEVICE_UNKNOWN 0x00000022 +#define FILE_DEVICE_VIDEO 0x00000023 +#define FILE_DEVICE_VIRTUAL_DISK 0x00000024 +#define FILE_DEVICE_WAVE_IN 0x00000025 +#define FILE_DEVICE_WAVE_OUT 0x00000026 +#define FILE_DEVICE_8042_PORT 0x00000027 +#define FILE_DEVICE_NETWORK_REDIRECTOR 0x00000028 +#define FILE_DEVICE_BATTERY 0x00000029 +#define FILE_DEVICE_BUS_EXTENDER 0x0000002a +#define FILE_DEVICE_MODEM 0x0000002b +#define FILE_DEVICE_VDM 0x0000002c + +/* + * Some of these device types are not currently accessible over the network + * and may never be accessible over the network. Some may change to be + * + * accessible over the network. The values for device types that may never + * be accessible over the network may be redefined to be just reserved at + * some date in the future. + * + * Characteristics is the sum of any of the following: + */ + +#define FILE_REMOVABLE_MEDIA 0x00000001 +#define FILE_READ_ONLY_DEVICE 0x00000002 +#define FILE_FLOPPY_DISKETTE 0x00000004 +#define FILE_WRITE_ONE_MEDIA 0x00000008 +#define FILE_REMOTE_DEVICE 0x00000010 +#define FILE_DEVICE_IS_MOUNTED 0x00000020 +#define FILE_VIRTUAL_VOLUME 0x00000040 + +/* + * CREATE_ANDX ShareAccess Flags + */ + +#define FILE_SHARE_NONE 0x00000000 +#define FILE_SHARE_READ 0x00000001 +#define FILE_SHARE_WRITE 0x00000002 +#define FILE_SHARE_DELETE 0x00000004 +#define FILE_SHARE_ALL 0x00000007 +#define FILE_SHARE_VALID_FLAGS 0x00000007 + + +/* + * CREATE_ANDX CreateDisposition flags + * + * FILE_SUPERSEDE If the file already exists it should be superseded + * by the specified file. If the file does not already + * exist then it should be created. + * + * FILE_CREATE If the file already exists the operation should fail. + * If the file does not already exist then it should be + * created. (aka CREATE_NEW) + * + * FILE_OPEN If the file already exists then it should be opened. + * If the file does not already exist then the operation + * should fail. (aka OPEN_EXISTING) + * + * FILE_OPEN_IF If the file already exists then it should be opened. + * If the file does not already exist then it should be + * created. (aka OPEN_ALWAYS) + * + * FILE_OVERWRITE If the file already exists, it should be opened and + * overwritten. If the file does not already exist then + * the operation should fail. (aka TRUNCATE_EXISTING) + * + * FILE_OVERWRITE_IF If the file already exists, it should be opened and + * overwritten. If the file does not already exist then + * it should be created. (aka CREATE_ALWAYS) + */ +#define FILE_SUPERSEDE 0x00000000 +#define FILE_OPEN 0x00000001 +#define FILE_CREATE 0x00000002 +#define FILE_OPEN_IF 0x00000003 +#define FILE_OVERWRITE 0x00000004 +#define FILE_OVERWRITE_IF 0x00000005 +#define FILE_MAXIMUM_DISPOSITION 0x00000005 + +/* + * CREATE_ANDX Impersonation levels + */ + +#define SECURITY_ANONYMOUS 0x00000001 +#define SECURITY_IDENTIFICATION 0x00000002 +#define SECURITY_IMPERSONATION 0x00000003 +#define SECURITY_DELEGATION 0x00000004 + +/* + * CREATE_ANDX SecurityFlags + */ + +#define SECURITY_CONTEXT_TRACKING 0x00000001 +#define SECURITY_EFFECTIVE_ONLY 0x00000002 + +/* + * Server types + */ +#define SV_WORKSTATION 0x00000001 /* All workstations */ +#define SV_SERVER 0x00000002 /* All servers */ +#define SV_SQLSERVER 0x00000004 /* running with SQL server */ +#define SV_DOMAIN_CTRL 0x00000008 /* Primary domain controller */ +#define SV_DOMAIN_BAKCTRL 0x00000010 /* Backup domain controller */ +#define SV_TIME_SOURCE 0x00000020 /* running timesource service */ +#define SV_AFP 0x00000040 /* Apple File Protocol */ +#define SV_NOVELL 0x00000080 /* Novell servers */ +#define SV_DOMAIN_MEMBER 0x00000100 /* Domain Member */ +#define SV_PRINTQ_SERVER 0x00000200 /* Server sharing print queue */ +#define SV_DIALIN_SERVER 0x00000400 /* Server running dialin */ +#define SV_XENIX_SERVER 0x00000800 /* Xenix server */ +#define SV_NT 0x00001000 /* NT server */ +#define SV_WFW 0x00002000 /* Server running Windows for */ +#define SV_SERVER_NT 0x00008000 /* Windows NT non DC server */ +#define SV_POTENTIAL_BROWSER 0x00010000 /* can run browser service */ +#define SV_BACKUP_BROWSER 0x00020000 /* Backup browser server */ +#define SV_MASTER_BROWSER 0x00040000 /* Master browser server */ +#define SV_DOMAIN_MASTER 0x00080000 /* Domain Master Browser */ +#define SV_OSF 0x00100000 /* OSF operating system */ +#define SV_VMS 0x00200000 /* VMS operating system */ +#define SV_WINDOWS_95_PLUS 0x00400000 /* Windows 95 or better */ + +#define SV_LOCAL_LIST_ONLY 0x40000000 /* Enumerate only "local" */ +#define SV_TYPE_DOMAIN_ENUM 0x80000000 /* Enumerate Domains */ + +#define MY_SERVER_TYPE (SV_SERVER | SV_NT | SV_SERVER_NT) + + +#define PRQ_ACTIVE 0 /* Active */ +#define PRQ_PAUSE 1 /* Paused */ +#define PRQ_ERROR 2 /* Error Occurred */ +#define PRQ_PENDING 3 /* Deletion pending */ + +#define PRJ_QS_QUEUED 0 /* Active */ +#define PRJ_QS_PAUSED 1 /* Paused */ +#define PRJ_QS_SPOOLING 2 /* Paused */ +#define PRJ_QS_PRINTING 3 /* Paused */ + + +#define SHARE_ACCESS_READ 0x01 /* read & execute from resource */ +#define SHARE_ACCESS_WRITE 0x02 /* write data to resource */ +#define SHARE_ACCESS_CREATE 0x04 /* create an instance of */ +#define SHARE_ACCESS_EXEC 0x08 /* execute from resource */ +#define SHARE_ACCESS_DELETE 0x10 /* Permission to delete the resource */ +#define SHARE_ACCESS_ATTRIB 0x20 /* Permission to modify the resource */ +#define SHARE_ACCESS_PERM 0x40 /* Permission to change permissions */ +#define SHARE_ACCESS_ALL 0x7F /* All of the above permissions */ + + +/* + * SMB_COM_NT_TRANSACTION sub-command codes (CIFS/1.0 section 5.3) + * + * SubCommand Code Value Description + * =============================== ===== ================================= + * NT_TRANSACT_CREATE 1 File open/create + * NT_TRANSACT_IOCTL 2 Device IOCTL + * NT_TRANSACT_SET_SECURITY_DESC 3 Set security descriptor + * NT_TRANSACT_NOTIFY_CHANGE 4 Start directory watch + * NT_TRANSACT_RENAME 5 Reserved (handle-based rename) + * NT_TRANSACT_QUERY_SECURITY_DESC 6 Retrieve security descriptor + * NT_TRANSACT_QUERY_QUOTA 7 Retrieve quota information + * NT_TRANSACT_SET_QUOTA 8 Set quota information + */ +#define NT_TRANSACT_MIN_FUNCTION 1 + +#define NT_TRANSACT_CREATE 1 +#define NT_TRANSACT_IOCTL 2 +#define NT_TRANSACT_SET_SECURITY_DESC 3 +#define NT_TRANSACT_NOTIFY_CHANGE 4 +#define NT_TRANSACT_RENAME 5 +#define NT_TRANSACT_QUERY_SECURITY_DESC 6 +#define NT_TRANSACT_QUERY_QUOTA 7 +#define NT_TRANSACT_SET_QUOTA 8 + +#define NT_TRANSACT_MAX_FUNCTION 8 + + +/* + * Pipe states + */ +#define SMB_PIPE_READMODE_BYTE 0x0000 +#define SMB_PIPE_READMODE_MESSAGE 0x0100 +#define SMB_PIPE_TYPE_BYTE 0x0000 +#define SMB_PIPE_TYPE_MESSAGE 0x0400 +#define SMB_PIPE_END_CLIENT 0x0000 +#define SMB_PIPE_END_SERVER 0x4000 +#define SMB_PIPE_WAIT 0x0000 +#define SMB_PIPE_NOWAIT 0x8000 +#define SMB_PIPE_UNLIMITED_INSTANCES 0x00FF + +/* + * smb_com_seek request + */ +#define SMB_SEEK_SET 0 /* set file offset to specified offset */ +#define SMB_SEEK_CUR 1 /* set file offset to current plus specified offset */ +#define SMB_SEEK_END 2 /* set file offset to EOF plus specified offset */ + +/* + * API Numbers for Transact based RAP (Remote Administration Protocol) calls + */ +#define API_WshareEnum 0 +#define API_WshareGetInfo 1 +#define API_WshareSetInfo 2 +#define API_WshareAdd 3 +#define API_WshareDel 4 +#define API_NetShareCheck 5 +#define API_WsessionEnum 6 +#define API_WsessionGetInfo 7 +#define API_WsessionDel 8 +#define API_WconnectionEnum 9 +#define API_WfileEnum 10 +#define API_WfileGetInfo 11 +#define API_WfileClose 12 +#define API_WserverGetInfo 13 +#define API_WserverSetInfo 14 +#define API_WserverDiskEnum 15 +#define API_WserverAdminCommand 16 +#define API_NetAuditOpen 17 +#define API_WauditClear 18 +#define API_NetErrorLogOpen 19 +#define API_WerrorLogClear 20 +#define API_NetCharDevEnum 21 +#define API_NetCharDevGetInfo 22 +#define API_WCharDevControl 23 +#define API_NetCharDevQEnum 24 +#define API_NetCharDevQGetInfo 25 +#define API_WCharDevQSetInfo 26 +#define API_WCharDevQPurge 27 +#define API_WCharDevQPurgeSelf 28 +#define API_WMessageNameEnum 29 +#define API_WMessageNameGetInfo 30 +#define API_WMessageNameAdd 31 +#define API_WMessageNameDel 32 +#define API_WMessageNameFwd 33 +#define API_WMessageNameUnFwd 34 +#define API_WMessageBufferSend 35 +#define API_WMessageFileSend 36 +#define API_WMessageLogFileSet 37 +#define API_WMessageLogFileGet 38 +#define API_WServiceEnum 39 +#define API_WServiceInstall 40 +#define API_WServiceControl 41 +#define API_WAccessEnum 42 +#define API_WAccessGetInfo 43 +#define API_WAccessSetInfo 44 +#define API_WAccessAdd 45 +#define API_WAccessDel 46 +#define API_WGroupEnum 47 +#define API_WGroupAdd 48 +#define API_WGroupDel 49 +#define API_WGroupAddUser 50 +#define API_WGroupDelUser 51 +#define API_WGroupGetUsers 52 +#define API_WUserEnum 53 +#define API_WUserAdd 54 +#define API_WUserDel 55 +#define API_WUserGetInfo 56 +#define API_WUserSetInfo 57 +#define API_WUserPasswordSet 58 +#define API_WUserGetGroups 59 +#define API_DeadTableEntry 60 +#define API_WWkstaSetUID 62 +#define API_WWkstaGetInfo 63 +#define API_WWkstaSetInfo 64 +#define API_WUseEnum 65 +#define API_WUseAdd 66 +#define API_WUseDel 67 +#define API_WUseGetInfo 68 +#define API_WPrintQEnum 69 +#define API_WPrintQGetInfo 70 +#define API_WPrintQSetInfo 71 +#define API_WPrintQAdd 72 +#define API_WPrintQDel 73 +#define API_WPrintQPause 74 +#define API_WPrintQContinue 75 +#define API_WPrintJobEnum 76 +#define API_WPrintJobGetInfo 77 +#define API_WPrintJobSetInfo_OLD 78 +#define API_WPrintJobDel 81 +#define API_WPrintJobPause 82 +#define API_WPrintJobContinue 83 +#define API_WPrintDestEnum 84 +#define API_WPrintDestGetInfo 85 +#define API_WPrintDestControl 86 +#define API_WProfileSave 87 +#define API_WProfileLoad 88 +#define API_WStatisticsGet 89 +#define API_WStatisticsClear 90 +#define API_NetRemoteTOD 91 +#define API_WNetBiosEnum 92 +#define API_WNetBiosGetInfo 93 +#define API_NetServerEnum 94 +#define API_I_NetServerEnum 95 +#define API_WServiceGetInfo 96 +#define API_WPrintQPurge 103 +#define API_NetServerEnum2 104 +#define API_WAccessGetUserPerms 105 +#define API_WGroupGetInfo 106 +#define API_WGroupSetInfo 107 +#define API_WGroupSetUsers 108 +#define API_WUserSetGroups 109 +#define API_WUserModalsGet 110 +#define API_WUserModalsSet 111 +#define API_WFileEnum2 112 +#define API_WUserAdd2 113 +#define API_WUserSetInfo2 114 +#define API_WUserPasswordSet2 115 +#define API_I_NetServerEnum2 116 +#define API_WConfigGet2 117 +#define API_WConfigGetAll2 118 +#define API_WGetDCName 119 +#define API_NetHandleGetInfo 120 +#define API_NetHandleSetInfo 121 +#define API_WStatisticsGet2 122 +#define API_WBuildGetInfo 123 +#define API_WFileGetInfo2 124 +#define API_WFileClose2 125 +#define API_WNetServerReqChallenge 126 +#define API_WNetServerAuthenticate 127 +#define API_WNetServerPasswordSet 128 +#define API_WNetAccountDeltas 129 +#define API_WNetAccountSync 130 +#define API_WUserEnum2 131 +#define API_WWkstaUserLogon 132 +#define API_WWkstaUserLogoff 133 +#define API_WLogonEnum 134 +#define API_WErrorLogRead 135 +#define API_WI_NetPathType 136 +#define API_WI_NetPathCanonicalize 137 +#define API_WI_NetPathCompare 138 +#define API_WI_NetNameValidate 139 +#define API_WI_NetNameCanonicalize 140 +#define API_WI_NetNameCompare 141 +#define API_WAuditRead 142 +#define API_WPrintDestAdd 143 +#define API_WPrintDestSetInfo 144 +#define API_WPrintDestDel 145 +#define API_WUserValidate2 146 +#define API_WPrintJobSetInfo 147 +#define API_TI_NetServerDiskEnum 148 +#define API_TI_NetServerDiskGetInfo 149 +#define API_TI_FTVerifyMirror 150 +#define API_TI_FTAbortVerify 151 +#define API_TI_FTGetInfo 152 +#define API_TI_FTSetInfo 153 +#define API_TI_FTLockDisk 154 +#define API_TI_FTFixError 155 +#define API_TI_FTAbortFix 156 +#define API_TI_FTDiagnoseError 157 +#define API_TI_FTGetDriveStats 158 +#define API_TI_FTErrorGetInfo 160 +#define API_NetAccessCheck 163 +#define API_NetAlertRaise 164 +#define API_NetAlertStart 165 +#define API_NetAlertStop 166 +#define API_NetAuditWrite 167 +#define API_NetIRemoteAPI 168 +#define API_NetServiceStatus 169 +#define API_I_NetServerRegister 170 +#define API_I_NetServerDeregister 171 +#define API_I_NetSessionEntryMake 172 +#define API_I_NetSessionEntryClear 173 +#define API_I_NetSessionEntryGetInfo 174 +#define API_I_NetSessionEntrySetInfo 175 +#define API_I_NetConnectionEntryMake 176 +#define API_I_NetConnectionEntryClear 177 +#define API_I_NetConnectionEntrySetInfo 178 +#define API_I_NetConnectionEntryGetInfo 179 +#define API_I_NetFileEntryMake 180 +#define API_I_NetFileEntryClear 181 +#define API_I_NetFileEntrySetInfo 182 +#define API_I_NetFileEntryGetInfo 183 +#define API_AltSrvMessageBufferSend 184 +#define API_AltSrvMessageFileSend 185 +#define API_wI_NetRplWkstaEnum 186 +#define API_wI_NetRplWkstaGetInfo 187 +#define API_wI_NetRplWkstaSetInfo 188 +#define API_wI_NetRplWkstaAdd 189 +#define API_wI_NetRplWkstaDel 190 +#define API_wI_NetRplProfileEnum 191 +#define API_wI_NetRplProfileGetInfo 192 +#define API_wI_NetRplProfileSetInfo 193 +#define API_wI_NetRplProfileAdd 194 +#define API_wI_NetRplProfileDel 195 +#define API_wI_NetRplProfileClone 196 +#define API_wI_NetRplBaseProfileEnum 197 +#define API_WIServerSetInfo 201 +#define API_WPrintDriverEnum 205 +#define API_WPrintQProcessorEnum 206 +#define API_WPrintPortEnum 207 +#define API_WNetWriteUpdateLog 208 +#define API_WNetAccountUpdate 209 +#define API_WNetAccountConfirmUpdate 210 +#define API_WConfigSet 211 +#define API_WAccountsReplicate 212 +#define API_SamOEMChgPasswordUser2_P 214 +#define API_NetServerEnum3 215 +#define API_WprintDriverGetInfo 250 +#define API_WprintDriverSetInfo 251 +#define API_WaliasAdd 252 +#define API_WaliasDel 253 +#define API_WaliasGetInfo 254 +#define API_WaliasSetInfo 255 +#define API_WaliasEnum 256 +#define API_WuserGetLogonAsn 257 +#define API_WuserSetLogonAsn 258 +#define API_WuserGetAppSel 259 +#define API_WuserSetAppSel 260 +#define API_WappAdd 261 +#define API_WappDel 262 +#define API_WappGetInfo 263 +#define API_WappSetInfo 264 +#define API_WappEnum 265 +#define API_WUserDCDBInit 266 +#define API_WDASDAdd 267 +#define API_WDASDDel 268 +#define API_WDASDGetInfo 269 +#define API_WDASDSetInfo 270 +#define API_WDASDEnum 271 +#define API_WDASDCheck 272 +#define API_WDASDCtl 273 +#define API_WuserRemoteLogonCheck 274 +#define API_WUserPasswordSet3 275 +#define API_WCreateRIPLMachine 276 +#define API_WDeleteRIPLMachine 277 +#define API_WGetRIPLMachineInfo 278 +#define API_WSetRIPLMachineInfo 279 +#define API_WEnumRIPLMachine 280 +#define API_WI_ShareAdd 281 +#define API_WI_AliasEnum 282 +#define API_WaccessApply 283 +#define API_WPrt16Query 284 +#define API_WPrt16Set 285 +#define API_WUserDel100 286 +#define API_WUserRemoteLogonCheck2 287 +#define API_WRemoteTODSet 294 +#define API_WprintJobMoveAll 295 +#define API_W16AppParmAdd 296 +#define API_W16AppParmDel 297 +#define API_W16AppParmGet 298 +#define API_W16AppParmSet 299 +#define API_W16RIPLMachineCreate 300 +#define API_W16RIPLMachineGetInfo 301 +#define API_W16RIPLMachineSetInfo 302 +#define API_W16RIPLMachineEnum 303 +#define API_W16RIPLMachineListParmEnum 304 +#define API_W16RIPLMachClassGetInfo 305 +#define API_W16RIPLMachClassEnum 306 +#define API_W16RIPLMachClassCreate 307 +#define API_W16RIPLMachClassSetInfo 308 +#define API_W16RIPLMachClassDelete 309 +#define API_W16RIPLMachClassLPEnum 310 +#define API_W16RIPLMachineDelete 311 +#define API_W16WSLevelGetInfo 312 +#define API_WserverNameAdd 313 +#define API_WserverNameDel 314 +#define API_WserverNameEnum 315 +#define API_I_WDASDEnum 316 +#define API_I_WDASDEnumTerminate 317 +#define API_I_WDASDSetInfo2 318 +#define MAX_RAP_API 318 #ifdef __cplusplus } #endif - #endif /* _SMBSRV_SMB_H */ |