path: root/usr/src/uts/common/io/yge/yge.h

/*
 * Copyright 2009 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 */

/*
 *
 *	LICENSE:
 *	Copyright (C) Marvell International Ltd. and/or its affiliates
 *
 *	The computer program files contained in this folder ("Files")
 *	are provided to you under the BSD-type license terms provided
 *	below, and any use of such Files and any derivative works
 *	thereof created by you shall be governed by the following terms
 *	and conditions:
 *
 *	- Redistributions of source code must retain the above copyright
 *	  notice, this list of conditions and the following disclaimer.
 *	- Redistributions in binary form must reproduce the above
 *	  copyright notice, this list of conditions and the following
 *	  disclaimer in the documentation and/or other materials provided
 *	  with the distribution.
 *	- Neither the name of Marvell nor the names of its contributors
 *	  may be used to endorse or promote products derived from this
 *	  software without specific prior written permission.
 *
 *	THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 *	"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 *	LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 *	FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 *	COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 *	INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 *	BUT NOT LIMITED TO, PROCUREMENT OF  SUBSTITUTE GOODS OR SERVICES;
 *	LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 *	HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 *	STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 *	ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
 *	OF THE POSSIBILITY OF SUCH DAMAGE.
 *	/LICENSE
 *
 */

#ifndef	_YGE_H
#define	_YGE_H

/*
 * SysKonnect PCI vendor ID
 */
#define	VENDORID_SK		0x1148

/*
 * Marvell PCI vendor ID
 */
#define	VENDORID_MARVELL	0x11AB

/*
 * D-Link PCI vendor ID
 */
#define	VENDORID_DLINK		0x1186

/*
 * SysKonnect ethernet device IDs
 */
#define	DEVICEID_SK_YUKON2	0x9000
#define	DEVICEID_SK_YUKON2_EXPR	0x9e00

/*
 * Marvell gigabit ethernet device IDs
 */
#define	DEVICEID_MRVL_8021CU	0x4340
#define	DEVICEID_MRVL_8022CU	0x4341
#define	DEVICEID_MRVL_8061CU	0x4342
#define	DEVICEID_MRVL_8062CU	0x4343
#define	DEVICEID_MRVL_8021X	0x4344
#define	DEVICEID_MRVL_8022X	0x4345
#define	DEVICEID_MRVL_8061X	0x4346
#define	DEVICEID_MRVL_8062X	0x4347
#define	DEVICEID_MRVL_8035	0x4350
#define	DEVICEID_MRVL_8036	0x4351
#define	DEVICEID_MRVL_8038	0x4352
#define	DEVICEID_MRVL_8039	0X4353
#define	DEVICEID_MRVL_4354	0X4354
#define	DEVICEID_MRVL_4360	0x4360
#define	DEVICEID_MRVL_4361	0x4361
#define	DEVICEID_MRVL_4362	0x4362
#define	DEVICEID_MRVL_4363	0x4363
#define	DEVICEID_MRVL_4364	0x4364
#define	DEVICEID_MRVL_436A	0x436A

/*
 * D-Link gigabit ethernet device ID
 */
#define	DEVICEID_DLINK_DGE550SX	0x4001
#define	DEVICEID_DLINK_DGE560T	0x4b00


#define	BIT(n)	(1U << n)

/*
 * PCI Configuration Space header
 */
#define	PCI_BASE_1ST	0x10	/* 32 bit 1st Base address */
#define	PCI_BASE_2ND	0x14	/* 32 bit 2nd Base address */
#define	PCI_OUR_REG_1	0x40	/* 32 bit Our Register 1 */
#define	PCI_OUR_REG_2	0x44	/* 32 bit Our Register 2 */
#define	PCI_OUR_STATUS	0x7c	/* 32 bit Adapter Status Register */
#define	PCI_OUR_REG_3	0x80	/* 32 bit Our Register 3 */
#define	PCI_OUR_REG_4	0x84	/* 32 bit Our Register 4 */
#define	PCI_OUR_REG_5	0x88	/* 32 bit Our Register 5 */

/* PCI Express Capability */
#define	PEX_CAP_ID	0xe0	/*  8 bit PEX Capability ID */
#define	PEX_NITEM	0xe1	/*  8 bit PEX Next Item Pointer */
#define	PEX_CAP_REG	0xe2	/* 16 bit PEX Capability Register */
#define	PEX_DEV_CAP	0xe4	/* 32 bit PEX Device Capabilities */
#define	PEX_DEV_CTRL	0xe8	/* 16 bit PEX Device Control */
#define	PEX_DEV_STAT	0xea	/* 16 bit PEX Device Status */
#define	PEX_LNK_CAP	0xec	/* 32 bit PEX Link Capabilities */
#define	PEX_LNK_CTRL	0xf0	/* 16 bit PEX Link Control */
#define	PEX_LNK_STAT	0xf2	/* 16 bit PEX Link Status */

/* PCI Express Extended Capabilities */
#define	PEX_ADV_ERR_REP	0x100	/* 32 bit PEX Advanced Error Reporting */
#define	PEX_UNC_ERR_STAT	0x104	/* 32 bit PEX Uncorr. Errors Status */
#define	PEX_UNC_ERR_MASK	0x108	/* 32 bit PEX Uncorr. Errors Mask */
#define	PEX_UNC_ERR_SEV		0x10c	/* 32 bit PEX Uncorr. Errors Severity */
#define	PEX_COR_ERR_STAT	0x110	/* 32 bit PEX Correc. Errors Status */
#define	PEX_COR_ERR_MASK	0x114	/* 32 bit PEX Correc. Errors Mask */
#define	PEX_ADV_ERR_CAP_C	0x118	/* 32 bit PEX Adv. Error Cap./Ctrl */
#define	PEX_HEADER_LOG		0x11c	/* 4x32 bit PEX Header Log Register */

/*	PCI_OUR_REG_1	32 bit	Our Register 1 */
#define	PCI_Y2_PIG_ENA		BIT(31)	/* Enable Plug-in-Go (YUKON-2) */
#define	PCI_Y2_DLL_DIS		BIT(30)	/* Disable PCI DLL (YUKON-2) */
#define	PCI_Y2_PHY2_COMA	BIT(29)	/* Set PHY 2 to Coma Mode (YUKON-2) */
#define	PCI_Y2_PHY1_COMA	BIT(28)	/* Set PHY 1 to Coma Mode (YUKON-2) */
#define	PCI_Y2_PHY2_POWD	BIT(27)	/* Set PHY 2 to Power Down (YUKON-2) */
#define	PCI_Y2_PHY1_POWD	BIT(26)	/* Set PHY 1 to Power Down (YUKON-2) */
#define	PCI_DIS_BOOT		BIT(24)	/* Disable BOOT via ROM */
#define	PCI_EN_IO		BIT(23)	/* Mapping to I/O space */
#define	PCI_EN_FPROM		BIT(22)	/* Enable FLASH mapping to memory */
					/* 1 = Map Flash to memory */
					/* 0 = Disable addr. dec */
#define	PCI_PAGESIZE		(3L<<20) /* Bit 21..20:	FLASH Page Size	*/
#define	PCI_PAGE_16		(0L<<20) /*		16 k pages	*/
#define	PCI_PAGE_32K		(1L<<20) /*		32 k pages	*/
#define	PCI_PAGE_64K		(2L<<20) /*		64 k pages	*/
#define	PCI_PAGE_128K		(3L<<20) /*		128 k pages	*/
#define	PCI_PAGEREG		(7L<<16) /* Bit 18..16:	Page Register	*/
#define	PCI_PEX_LEGNAT		BIT(15)	/* PEX PM legacy/native (YUKON-2) */
#define	PCI_FORCE_BE		BIT(14)	/* Assert all BEs on MR */
#define	PCI_DIS_MRL		BIT(13)	/* Disable Mem Read Line */
#define	PCI_DIS_MRM		BIT(12)	/* Disable Mem Read Multiple */
#define	PCI_DIS_MWI		BIT(11)	/* Disable Mem Write & Invalidate */
#define	PCI_DISC_CLS		BIT(10)	/* Disc: cacheLsz bound */
#define	PCI_BURST_DIS		BIT(9)	/* Burst Disable */
#define	PCI_DIS_PCI_CLK		BIT(8)	/* Disable PCI clock driving */
#define	PCI_SKEW_DAS		(0xfL<<4) /* Bit 7.. 4:	Skew Ctrl, DAS Ext */
#define	PCI_SKEW_BASE		0xfL	/* Bit	3.. 0:	Skew Ctrl, Base	*/
#define	PCI_CLS_OPT		BIT(3)	/* Cache Line Size PCI-X (YUKON-2) */

/*	PCI_OUR_REG_2	32 bit	Our Register 2 */
#define	PCI_VPD_WR_THR	(0xff<<24)	/* Bit 31..24:	VPD Write Threshold */
#define	PCI_DEV_SEL	(0x7f<<17)	/* Bit 23..17:	EEPROM Device Select */
#define	PCI_VPD_ROM_SZ	(0x07<<14)	/* Bit 16..14:	VPD ROM Size	*/
					/* Bit 13..12:	reserved	*/
#define	PCI_PATCH_DIR	(0x0f<<8)	/* Bit 11.. 8:	Ext Patches dir 3..0 */
#define	PCI_PATCH_DIR_3	BIT(11)
#define	PCI_PATCH_DIR_2	BIT(10)
#define	PCI_PATCH_DIR_1	BIT(9)
#define	PCI_PATCH_DIR_0	BIT(8)
#define	PCI_EXT_PATCHS	(0x0f<<4)	/* Bit	7.. 4:	Extended Patches 3..0 */
#define	PCI_EXT_PATCH_3	BIT(7)
#define	PCI_EXT_PATCH_2	BIT(6)
#define	PCI_EXT_PATCH_1	BIT(5)
#define	PCI_EXT_PATCH_0	BIT(4)
#define	PCI_EN_DUMMY_RD	BIT(3)		/* Enable Dummy Read */
#define	PCI_REV_DESC	BIT(2)		/* Reverse Desc. Bytes */
#define	PCI_USEDATA64	BIT(0)		/* Use 64Bit Data bus ext */

/* PCI_OUR_STATUS	32 bit	Adapter Status Register (Yukon-2) */
#define	PCI_OS_PCI64B	BIT(31)		/* Conventional PCI 64 bits Bus */
#define	PCI_OS_PCIX	BIT(30)		/* PCI-X Bus */
#define	PCI_OS_MODE_MSK	(3<<28)		/* Bit 29..28:	PCI-X Bus Mode Mask */
#define	PCI_OS_PCI66M	BIT(27)		/* PCI 66 MHz Bus */
#define	PCI_OS_PCI_X	BIT(26)		/* PCI/PCI-X Bus (0 = PEX) */
#define	PCI_OS_DLLE_MSK	(3<<24)		/* Bit 25..24:	DLL Status Indication */
#define	PCI_OS_DLLR_MSK	(0x0f<<20)	/* Bit 23..20: DLL Row Cntrs Values */
#define	PCI_OS_DLLC_MSK	(0x0f<<16)	/* Bit 19..16:	DLL Col. Cntrs Values */

#define	PCI_OS_SPEED(val)	((val & PCI_OS_MODE_MSK) >> 28)	/* PCI-X Spd */
/* possible values for the speed field of the register */
#define	PCI_OS_SPD_PCI		0	/* PCI Conventional Bus */
#define	PCI_OS_SPD_X66		1	/* PCI-X 66MHz Bus */
#define	PCI_OS_SPD_X100		2	/* PCI-X 100MHz Bus */
#define	PCI_OS_SPD_X133		3	/* PCI-X 133MHz Bus */

/* PCI_OUR_REG_4	32 bit	Our Register 4 (Yukon-ECU only) */
#define	PCI_TIMER_VALUE_MSK	(0xff<<16)	/* Bit 23..16:	Tmr Vul Msk */
#define	PCI_FORCE_ASPM_REQUEST	BIT(15)	/* Force ASPM Request (A1 only) */
#define	PCI_ASPM_GPHY_LINK_DOWN	BIT(14)	/* GPHY Link Down (A1 only) */
#define	PCI_ASPM_INT_FIFO_EMPTY	BIT(13)	/* Internal FIFO Empty (A1 only) */
#define	PCI_ASPM_CLKRUN_REQUEST	BIT(12)	/* CLKRUN Request (A1 only) */
#define	PCI_ASPM_FORCE_CLKREQ_ENA	BIT(4)	/* Frc CLKRQ Enbl (A1b only) */
#define	PCI_ASPM_CLKREQ_PAD_CTL	BIT(3)	/* CLKREQ PAD Control (A1 only) */
#define	PCI_ASPM_A1_MODE_SELECT	BIT(2)	/* A1 Mode Select (A1 only) */
#define	PCI_CLK_GATE_PEX_UNIT_ENA	BIT(1)	/* Enable Gate PEX Unit Clock */
#define	PCI_CLK_GATE_ROOT_COR_ENA	BIT(0)	/* Enbl Gate Root Core Clock */


/* PCI_OUR_REG_5 - 32 bit  Our Register 5 (Yukon-ECU only) */
/* Bit 31..27:  for A3 & later */
#define	P_CTL_TIM_VMAIN_AV_MSK  (3<<27) /* Bit 28..27: Timer Vmain_av Mask */

/* PEX_DEV_CTRL	16 bit	PEX Device Control (Yukon-2) */
#define	PEX_DC_MAX_RRS_MSK	(7<<12)	/* Bit 14..12:	Max. Read Request */
#define	PEX_DC_EN_NO_SNOOP	BIT(11)	/* Enable No Snoop */
#define	PEX_DC_EN_AUX_POW	BIT(10)	/* Enable AUX Power */
#define	PEX_DC_EN_PHANTOM	BIT(9)	/* Enable Phantom Functions */
#define	PEX_DC_EN_EXT_TAG	BIT(8)	/* Enable Extended Tag Field */
#define	PEX_DC_MAX_PLS_MSK	(7<<5)	/* Bit	7.. 5:	Max. Payload Size */
#define	PEX_DC_EN_REL_ORD	BIT(4)	/* Enable Relaxed Ordering */
#define	PEX_DC_EN_UNS_RQ_RP	BIT(3)	/* Enable Unsupported Request Report */
#define	PEX_DC_EN_FAT_ER_RP	BIT(2)	/* Enable Fatal Error Report */
#define	PEX_DC_EN_NFA_ER_RP	BIT(1)	/* Enable Non-Fatal Error Report */
#define	PEX_DC_EN_COR_ER_RP	BIT(0)	/* Enable Correctable Error Report */

#define	PEX_DC_MAX_RD_RQ_SIZE(x)	((x << 12) & PEX_DC_MAX_RRS_MSK)

/* PEX_LNK_STAT	16 bit	PEX Link Status (Yukon-2) */
#define	PEX_LS_SLOT_CLK_CFG	BIT(12)	/* Slot Clock Config */
#define	PEX_LS_LINK_TRAIN	BIT(11)	/* Link Training */
#define	PEX_LS_TRAIN_ERROR	BIT(10)	/* Training Error */
#define	PEX_LS_LINK_WI_MSK	(0x3f<<4) /* Bit  9.. 4: Neg. Link Width */
#define	PEX_LS_LINK_SP_MSK	0x0f	/* Bit	3.. 0:	Link Speed Mask */

/* PEX_UNC_ERR_STAT PEX Uncorrectable Errors Status Register (Yukon-2) */
#define	PEX_UNSUP_REQ	BIT(20)		/* Unsupported Request Error */
#define	PEX_MALFOR_TLP	BIT(18)		/* Malformed TLP */
#define	PEX_RX_OV	BIT(17)		/* Receiver Overflow (not supported) */
#define	PEX_UNEXP_COMP	BIT(16)		/* Unexpected Completion */
#define	PEX_COMP_TO	BIT(14)		/* Completion Timeout */
#define	PEX_FLOW_CTRL_P	BIT(13)		/* Flow Control Protocol Error */
#define	PEX_POIS_TLP	BIT(12)		/* Poisoned TLP */
#define	PEX_DATA_LINK_P BIT(4)		/* Data Link Protocol Error */

#define	PEX_FATAL_ERRORS				\
	(PEX_MALFOR_TLP | PEX_FLOW_CTRL_P | PEX_DATA_LINK_P)

/*	Control Register File (Address Map) */

/*
 *	Bank 0
 */
#define	B0_RAP		0x0000	/*  8 bit Register Address Port */
#define	B0_CTST		0x0004	/* 16 bit Control/Status register */
#define	B0_LED		0x0006	/*  8 Bit LED register */
#define	B0_POWER_CTRL	0x0007	/*  8 Bit Power Control reg (YUKON only) */
#define	B0_ISRC		0x0008	/* 32 bit Interrupt Source Register */
#define	B0_IMSK		0x000c	/* 32 bit Interrupt Mask Register */
#define	B0_HWE_ISRC	0x0010	/* 32 bit HW Error Interrupt Src Reg */
#define	B0_HWE_IMSK	0x0014	/* 32 bit HW Error Interrupt Mask Reg */
#define	B0_SP_ISRC	0x0018	/* 32 bit Special Interrupt Source Reg 1 */

/* Special ISR registers (Yukon-2 only) */
#define	B0_Y2_SP_ISRC2	0x001c	/* 32 bit Special Interrupt Source Reg 2 */
#define	B0_Y2_SP_ISRC3	0x0020	/* 32 bit Special Interrupt Source Reg 3 */
#define	B0_Y2_SP_EISR	0x0024	/* 32 bit Enter ISR Reg */
#define	B0_Y2_SP_LISR	0x0028	/* 32 bit Leave ISR Reg */
#define	B0_Y2_SP_ICR	0x002c	/* 32 bit Interrupt Control Reg */

/*
 *	Bank 1
 *	- completely empty (this is the RAP Block window)
 *	Note: if RAP = 1 this page is reserved
 */

/*
 *	Bank 2
 */
/* NA reg = 48 bit Network Address Register, 3x16 or 8x8 bit readable */
#define	B2_MAC_1	0x0100	/* NA reg MAC Address 1 */
#define	B2_MAC_2	0x0108	/* NA reg MAC Address 2 */
#define	B2_MAC_3	0x0110	/* NA reg MAC Address 3 */
#define	B2_CONN_TYP	0x0118	/*  8 bit Connector type */
#define	B2_PMD_TYP	0x0119	/*  8 bit PMD type */
#define	B2_MAC_CFG	0x011a	/*  8 bit MAC Configuration / Chip Revision */
#define	B2_CHIP_ID	0x011b	/*  8 bit Chip Identification Number */
#define	B2_E_0		0x011c	/*  8 bit EPROM Byte 0 (ext. SRAM size */
#define	B2_Y2_CLK_GATE	0x011d	/*  8 bit Clock Gating (Yukon-2) */
#define	B2_Y2_HW_RES	0x011e	/*  8 bit HW Resources (Yukon-2) */
#define	B2_E_3		0x011f	/*  8 bit EPROM Byte 3 */
#define	B2_Y2_CLK_CTRL	0x0120	/* 32 bit Core Clock Frequency Control */
#define	B2_TI_INI	0x0130	/* 32 bit Timer Init Value */
#define	B2_TI_VAL	0x0134	/* 32 bit Timer Value */
#define	B2_TI_CTRL	0x0138	/*  8 bit Timer Control */
#define	B2_TI_TEST	0x0139	/*  8 Bit Timer Test */
#define	B2_IRQM_INI	0x0140	/* 32 bit IRQ Moderation Timer Init Reg. */
#define	B2_IRQM_VAL	0x0144	/* 32 bit IRQ Moderation Timer Value */
#define	B2_IRQM_CTRL	0x0148	/*  8 bit IRQ Moderation Timer Control */
#define	B2_IRQM_TEST	0x0149	/*  8 bit IRQ Moderation Timer Test */
#define	B2_IRQM_MSK	0x014c	/* 32 bit IRQ Moderation Mask */
#define	B2_IRQM_HWE_MSK 0x0150	/* 32 bit IRQ Moderation HW Error Mask */
#define	B2_TST_CTRL1	0x0158	/*  8 bit Test Control Register 1 */
#define	B2_TST_CTRL2	0x0159	/*  8 bit Test Control Register 2 */
#define	B2_GP_IO	0x015c	/* 32 bit General Purpose I/O Register */
#define	B2_I2C_CTRL	0x0160	/* 32 bit I2C HW Control Register */
#define	B2_I2C_DATA	0x0164	/* 32 bit I2C HW Data Register */
#define	B2_I2C_IRQ	0x0168	/* 32 bit I2C HW IRQ Register */
#define	B2_I2C_SW	0x016c	/* 32 bit I2C SW Port Register */

#define	Y2_PEX_PHY_DATA	0x0170	/* 16 bit PEX PHY Data Register */
#define	Y2_PEX_PHY_ADDR	0x0172	/* 16 bit PEX PHY Address Register */

/*
 *	Bank 3
 */
/* RAM Random Registers */
#define	B3_RAM_ADDR	0x0180	/* 32 bit RAM Address, to read or write */
#define	B3_RAM_DATA_LO	0x0184	/* 32 bit RAM Data Word (low dWord) */
#define	B3_RAM_DATA_HI	0x0188	/* 32 bit RAM Data Word (high dWord) */

#define	SELECT_RAM_BUFFER(rb, addr) (addr | (rb << 6))	/* Yukon-2 only */

/* RAM Interface Registers */
/* Yukon-2: use SELECT_RAM_BUFFER() to access the RAM buffer */
/*
 * The HW-Spec. calls this registers Timeout Value 0..11. But this names are
 * not usable in SW. Please notice these are NOT real timeouts, these are
 * the number of qWords transferred continuously.
 */
#define	B3_RI_WTO_R1	0x0190	/*  8 bit WR Timeout Queue R1 (TO0) */
#define	B3_RI_WTO_XA1	0x0191	/*  8 bit WR Timeout Queue XA1 (TO1) */
#define	B3_RI_WTO_XS1	0x0192	/*  8 bit WR Timeout Queue XS1 (TO2) */
#define	B3_RI_RTO_R1	0x0193	/*  8 bit RD Timeout Queue R1 (TO3) */
#define	B3_RI_RTO_XA1	0x0194	/*  8 bit RD Timeout Queue XA1 (TO4) */
#define	B3_RI_RTO_XS1	0x0195	/*  8 bit RD Timeout Queue XS1 (TO5) */
#define	B3_RI_WTO_R2	0x0196	/*  8 bit WR Timeout Queue R2 (TO6) */
#define	B3_RI_WTO_XA2	0x0197	/*  8 bit WR Timeout Queue XA2 (TO7) */
#define	B3_RI_WTO_XS2	0x0198	/*  8 bit WR Timeout Queue XS2 (TO8) */
#define	B3_RI_RTO_R2	0x0199	/*  8 bit RD Timeout Queue R2 (TO9) */
#define	B3_RI_RTO_XA2	0x019a	/*  8 bit RD Timeout Queue XA2 (TO10) */
#define	B3_RI_RTO_XS2	0x019b	/*  8 bit RD Timeout Queue XS2 (TO11) */
#define	B3_RI_TO_VAL	0x019c	/*  8 bit Current Timeout Count Val */
#define	B3_RI_CTRL	0x01a0	/* 16 bit RAM Interface Control Register */
#define	B3_RI_TEST	0x01a2	/*  8 bit RAM Interface Test Register */

/*
 *	Bank 4 - 5
 */
/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */
#define	TXA_ITI_INI	0x0200	/* 32 bit Tx Arb Interval Timer Init Val */
#define	TXA_ITI_VAL	0x0204	/* 32 bit Tx Arb Interval Timer Value */
#define	TXA_LIM_INI	0x0208	/* 32 bit Tx Arb Limit Counter Init Val */
#define	TXA_LIM_VAL	0x020c	/* 32 bit Tx Arb Limit Counter Value */
#define	TXA_CTRL	0x0210	/*  8 bit Tx Arbiter Control Register */
#define	TXA_TEST	0x0211	/*  8 bit Tx Arbiter Test Register */
#define	TXA_STAT	0x0212	/*  8 bit Tx Arbiter Status Register */

#define	MR_ADDR(Mac, Offs)	(((Mac) << 7) + (Offs))

/* RSS key registers for Yukon-2 Family */
#define	B4_RSS_KEY	0x0220	/* 4x32 bit RSS Key register (Yukon-2) */
/* RSS key register offsets */
#define	KEY_IDX_0	 0		/* offset for location of KEY 0 */
#define	KEY_IDX_1	 4		/* offset for location of KEY 1 */
#define	KEY_IDX_2	 8		/* offset for location of KEY 2 */
#define	KEY_IDX_3	12		/* offset for location of KEY 3 */
	/* 0x0280 - 0x0292:	MAC 2 */
#define	RSS_KEY_ADDR (Port, KeyIndex)	\
	((B4_RSS_KEY | (((Port) == 0) ? 0 : 0x80)) + (KeyIndex))

/*
 *	Bank 8 - 15
 */
/* Receive and Transmit Queue Registers, use Q_ADDR() to access */
#define	B8_Q_REGS	0x0400

/* Queue Register Offsets, use Q_ADDR() to access */
#define	Q_D	0x00	/* 8*32	bit Current Descriptor */
#define	Q_DA_L	0x20	/* 32 bit Current Descriptor Address Low dWord */
#define	Q_DONE	0x24	/* 16 bit Done Index */
#define	Q_AC_L	0x28	/* 32 bit Current Address Counter Low dWord */
#define	Q_AC_H	0x2c	/* 32 bit Current Address Counter High dWord */
#define	Q_BC	0x30	/* 32 bit Current Byte Counter */
#define	Q_CSR	0x34	/* 32 bit BMU Control/Status Register */
#define	Q_F	0x38	/* 32 bit Flag Register */
#define	Q_T1	0x3c	/* 32 bit Test Register 1 */
#define	Q_T1_TR	0x3c	/*  8 bit Test Register 1 Transfer SM */
#define	Q_T1_WR	0x3d	/*  8 bit Test Register 1 Write Descriptor SM */
#define	Q_T1_RD	0x3e	/*  8 bit Test Register 1 Read Descriptor SM */
#define	Q_T1_SV	0x3f	/*  8 bit Test Register 1 Supervisor SM */
#define	Q_WM	0x40	/* 16 bit FIFO Watermark */
#define	Q_AL	0x42	/*  8 bit FIFO Alignment */
#define	Q_RSP	0x44	/* 16 bit FIFO Read Shadow Pointer */
#define	Q_RSL	0x46	/*  8 bit FIFO Read Shadow Level */
#define	Q_RP	0x48	/*  8 bit FIFO Read Pointer */
#define	Q_RL	0x4a	/*  8 bit FIFO Read Level */
#define	Q_WP	0x4c	/*  8 bit FIFO Write Pointer */
#define	Q_WSP	0x4d	/*  8 bit FIFO Write Shadow Pointer */
#define	Q_WL	0x4e	/*  8 bit FIFO Write Level */
#define	Q_WSL	0x4f	/*  8 bit FIFO Write Shadow Level */

#define	Q_ADDR(Queue, Offs)	(B8_Q_REGS + (Queue) + (Offs))

/* Queue Prefetch Unit Offsets, use Y2_PREF_Q_ADDR() to address */
#define	Y2_B8_PREF_REGS		0x0450

#define	PREF_UNIT_CTRL_REG	0x00	/* 32 bit Prefetch Control register */
#define	PREF_UNIT_LAST_IDX_REG	0x04	/* 16 bit Last Index */
#define	PREF_UNIT_ADDR_LOW_REG	0x08	/* 32 bit List start addr, low part */
#define	PREF_UNIT_ADDR_HI_REG	0x0c	/* 32 bit List start addr, high part */
#define	PREF_UNIT_GET_IDX_REG	0x10	/* 16 bit Get Index */
#define	PREF_UNIT_PUT_IDX_REG	0x14	/* 16 bit Put Index */
#define	PREF_UNIT_FIFO_WP_REG	0x20	/*  8 bit FIFO write pointer */
#define	PREF_UNIT_FIFO_RP_REG	0x24	/*  8 bit FIFO read pointer */
#define	PREF_UNIT_FIFO_WM_REG	0x28	/*  8 bit FIFO watermark */
#define	PREF_UNIT_FIFO_LEV_REG	0x2c	/*  8 bit FIFO level */

#define	PREF_UNIT_MASK_IDX	0x0fff

#define	Y2_PREF_Q_ADDR(Queue, Offs)	(Y2_B8_PREF_REGS + (Queue) + (Offs))

/*
 *	Bank 16 - 23
 */
/* RAM Buffer Registers */
#define	B16_RAM_REGS	0x0800

/* RAM Buffer Register Offsets, use RB_ADDR() to access */
#define	RB_START	0x00	/* 32 bit RAM Buffer Start Address */
#define	RB_END		0x04	/* 32 bit RAM Buffer End Address */
#define	RB_WP		0x08	/* 32 bit RAM Buffer Write Pointer */
#define	RB_RP		0x0c	/* 32 bit RAM Buffer Read Pointer */
#define	RB_RX_UTPP	0x10	/* 32 bit Rx Upper Threshold, Pause Packet */
#define	RB_RX_LTPP	0x14	/* 32 bit Rx Lower Threshold, Pause Packet */
#define	RB_RX_UTHP	0x18	/* 32 bit Rx Upper Threshold, High Prio */
#define	RB_RX_LTHP	0x1c	/* 32 bit Rx Lower Threshold, High Prio */
#define	RB_PC		0x20	/* 32 bit RAM Buffer Packet Counter */
#define	RB_LEV		0x24	/* 32 bit RAM Buffer Level Register */
#define	RB_CTRL		0x28	/*  8 bit RAM Buffer Control Register */
#define	RB_TST1		0x29	/*  8 bit RAM Buffer Test Register 1 */
#define	RB_TST2		0x2a	/*  8 bit RAM Buffer Test Register 2 */

/*
 *	Bank 24
 */
/* Receive GMAC FIFO (YUKON and Yukon-2), use MR_ADDR() to access */
#define	RX_GMF_EA	0x0c40	/* 32 bit Rx GMAC FIFO End Address */
#define	RX_GMF_AF_THR	0x0c44	/* 32 bit Rx GMAC FIFO Almost Full Thresh. */
#define	RX_GMF_CTRL_T	0x0c48	/* 32 bit Rx GMAC FIFO Control/Test */
#define	RX_GMF_FL_MSK	0x0c4c	/* 32 bit Rx GMAC FIFO Flush Mask */
#define	RX_GMF_FL_THR	0x0c50	/* 32 bit Rx GMAC FIFO Flush Threshold */
#define	RX_GMF_TR_THR	0x0c54	/* 32 bit Rx Truncation Threshold (Yukon-2) */
#define	RX_GMF_UP_THR	0x0c58	/*  8 bit Rx Upper Pause Thr (Yukon-EC_U) */
#define	RX_GMF_LP_THR	0x0c5a	/*  8 bit Rx Lower Pause Thr (Yukon-EC_U) */
#define	RX_GMF_VLAN	0x0c5c	/* 32 bit Rx VLAN Type Register (Yukon-2) */
#define	RX_GMF_WP	0x0c60	/* 32 bit Rx GMAC FIFO Write Pointer */
#define	RX_GMF_WLEV	0x0c68	/* 32 bit Rx GMAC FIFO Write Level */
#define	RX_GMF_RP	0x0c70	/* 32 bit Rx GMAC FIFO Read Pointer */
#define	RX_GMF_RLEV	0x0c78	/* 32 bit Rx GMAC FIFO Read Level */

/*
 *	Bank 25
 */
	/* 0x0c80 - 0x0cbf:	MAC 2 */
	/* 0x0cc0 - 0x0cff:	reserved */

/*
 *	Bank 26
 */
/* Transmit GMAC FIFO (YUKON and Yukon-2), use MR_ADDR() to access */
#define	TX_DYN_WM_ENA	0x0003
#define	TX_GMF_EA	0x0d40	/* 32 bit Tx GMAC FIFO End Address */
#define	TX_GMF_AE_THR	0x0d44	/* 32 bit Tx GMAC FIFO Almost Empty Thresh. */
#define	TX_GMF_CTRL_T	0x0d48	/* 32 bit Tx GMAC FIFO Control/Test */
#define	TX_GMF_VLAN	0x0d5c	/* 32 bit Tx VLAN Type Register (Yukon-2) */
#define	TX_GMF_WP	0x0d60	/* 32 bit Tx GMAC FIFO Write Pointer */
#define	TX_GMF_WSP	0x0d64	/* 32 bit Tx GMAC FIFO Write Shadow Pointer */
#define	TX_GMF_WLEV	0x0d68	/* 32 bit Tx GMAC FIFO Write Level */
#define	TX_GMF_RP	0x0d70	/* 32 bit Tx GMAC FIFO Read Pointer */
#define	TX_GMF_RSTP	0x0d74	/* 32 bit Tx GMAC FIFO Restart Pointer */
#define	TX_GMF_RLEV	0x0d78	/* 32 bit Tx GMAC FIFO Read Level */

/*
 *	Bank 27
 */
	/* 0x0d80 - 0x0dbf:	MAC 2 */
	/* 0x0daa - 0x0dff:	reserved */

/*
 *	Bank 28
 */
/* Descriptor Poll Timer Registers */
#define	B28_DPT_INI	0x0e00	/* 24 bit Descriptor Poll Timer Init Val */
#define	B28_DPT_VAL	0x0e04	/* 24 bit Descriptor Poll Timer Curr Val */
#define	B28_DPT_CTRL	0x0e08	/*  8 bit Descriptor Poll Timer Ctrl Reg */
#define	B28_DPT_TST	0x0e0a	/*  8 bit Descriptor Poll Timer Test Reg */
/* Time Stamp Timer Registers (YUKON only) */
#define	GMAC_TI_ST_VAL	0x0e14	/* 32 bit Time Stamp Timer Curr Val */
#define	GMAC_TI_ST_CTRL	0x0e18	/*  8 bit Time Stamp Timer Ctrl Reg */
#define	GMAC_TI_ST_TST	0x0e1a	/*  8 bit Time Stamp Timer Test Reg */
/* Polling Unit Registers (Yukon-2 only) */
#define	POLL_CTRL	0x0e20	/* 32 bit Polling Unit Control Reg */
#define	POLL_LAST_IDX	0x0e24	/* 16 bit Polling Unit List Last Index */
#define	POLL_LIST_ADDR_LO	0x0e28	/* 32 bit Poll. List Start Addr (low) */
#define	POLL_LIST_ADDR_HI	0x0e2c	/* 32 bit Poll. Lst Start Addr (hgh) */
/* ASF Subsystem Registers (Yukon-2 only) */
#define	B28_Y2_SMB_CONFIG	0x0e40	/* 32 bit ASF SMBus Config Register */
#define	B28_Y2_SMB_CSD_REG	0x0e44	/* 32 bit ASF SMB Control/Status/Data */
#define	B28_Y2_ASF_IRQ_V_BASE	0x0e60	/* 32 bit ASF IRQ Vector Base */
#define	B28_Y2_ASF_STAT_CMD	0x0e68	/* 32 bit ASF Status and Command Reg */
#define	B28_Y2_ASF_HOST_COM	0x0e6c	/* 32 bit ASF Host Communication Reg */
#define	B28_Y2_DATA_REG_1	0x0e70	/* 32 bit ASF/Host Data Register 1 */
#define	B28_Y2_DATA_REG_2	0x0e74	/* 32 bit ASF/Host Data Register 2 */
#define	B28_Y2_DATA_REG_3	0x0e78	/* 32 bit ASF/Host Data Register 3 */
#define	B28_Y2_DATA_REG_4	0x0e7c	/* 32 bit ASF/Host Data Register 4 */

/*
 *	Bank 29
 */

/* Status BMU Registers (Yukon-2 only) */
#define	STAT_CTRL		0x0e80	/* 32 bit Status BMU Control Reg */
#define	STAT_LAST_IDX		0x0e84	/* 16 bit Status BMU Last Index */
#define	STAT_LIST_ADDR_LO	0x0e88	/* 32 bit Status Lst Start Addr (lo) */
#define	STAT_LIST_ADDR_HI	0x0e8c	/* 32 bit Status Lst Strt Addr (hgh) */
#define	STAT_TXA1_RIDX		0x0e90	/* 16 bit Status TxA1 Reprt Indx Reg */
#define	STAT_TXS1_RIDX		0x0e92	/* 16 bit Status TxS1 Reprt Indx Reg */
#define	STAT_TXA2_RIDX		0x0e94	/* 16 bit Status TxA2 Reprt Indx Reg */
#define	STAT_TXS2_RIDX		0x0e96	/* 16 bit Status TxS2 Reprt Indx Reg */
#define	STAT_TX_IDX_TH		0x0e98	/* 16 bit Status Tx Indx Thrshld Reg */
#define	STAT_PUT_IDX		0x0e9c	/* 16 bit Status Put Index Reg */
/* FIFO Control/Status Registers (Yukon-2 only) */
#define	STAT_FIFO_WP		0x0ea0	/*  8 bit Status FIFO Wrt Pnter Reg */
#define	STAT_FIFO_RP		0x0ea4	/*  8 bit Status FIFO Read Pnter Reg */
#define	STAT_FIFO_RSP		0x0ea6	/*  8 bit Status FIFO Read Shdw Ptr */
#define	STAT_FIFO_LEVEL		0x0ea8	/*  8 bit Status FIFO Level Reg */
#define	STAT_FIFO_SHLVL		0x0eaa	/*  8 bit Status FIFO Shdw Level Reg */
#define	STAT_FIFO_WM		0x0eac	/*  8 bit Status FIFO Watermark Reg */
#define	STAT_FIFO_ISR_WM	0x0ead	/*  8 bit Status FIFO ISR Wtrmrk Reg */
/* Level and ISR Timer Registers (Yukon-2 only) */
#define	STAT_LEV_TIMER_INI	0x0eb0	/* 32 bit Level Timer Init. Value Reg */
#define	STAT_LEV_TIMER_CNT	0x0eb4	/* 32 bit Level Timer Counter Reg */
#define	STAT_LEV_TIMER_CTRL	0x0eb8	/*  8 bit Level Timer Control Reg */
#define	STAT_LEV_TIMER_TEST	0x0eb9	/*  8 bit Level Timer Test Reg */
#define	STAT_TX_TIMER_INI	0x0ec0	/* 32 bit Tx Timer Init. Value Reg */
#define	STAT_TX_TIMER_CNT	0x0ec4	/* 32 bit Tx Timer Counter Reg */
#define	STAT_TX_TIMER_CTRL	0x0ec8	/*  8 bit Tx Timer Control Reg */
#define	STAT_TX_TIMER_TEST	0x0ec9	/*  8 bit Tx Timer Test Reg */
#define	STAT_ISR_TIMER_INI	0x0ed0	/* 32 bit ISR Timer Init. Value Reg */
#define	STAT_ISR_TIMER_CNT	0x0ed4	/* 32 bit ISR Timer Counter Reg */
#define	STAT_ISR_TIMER_CTRL	0x0ed8	/*  8 bit ISR Timer Control Reg */
#define	STAT_ISR_TIMER_TEST	0x0ed9	/*  8 bit ISR Timer Test Reg */

#define	ST_LAST_IDX_MASK	0x007f	/* Last Index Mask */
#define	ST_TXRP_IDX_MASK	0x0fff	/* Tx Report Index Mask */
#define	ST_TXTH_IDX_MASK	0x0fff	/* Tx Threshold Index Mask */
#define	ST_WM_IDX_MASK		0x3f	/* FIFO Watermark Index Mask */

/*
 *	Bank 30
 */
/* GMAC and GPHY Control Registers (YUKON only) */
#define	GMAC_CTRL	0x0f00	/* 32 bit GMAC Control Reg */
#define	GPHY_CTRL	0x0f04	/* 32 bit GPHY Control Reg */
#define	GMAC_IRQ_SRC	0x0f08	/*  8 bit GMAC Interrupt Source Reg */
#define	GMAC_IRQ_MSK	0x0f0c	/*  8 bit GMAC Interrupt Mask Reg */
#define	GMAC_LINK_CTRL	0x0f10	/* 16 bit Link Control Reg */

/* Wake-up Frame Pattern Match Control Registers (YUKON only) */

#define	WOL_REG_OFFS	0x20	/* HW-Bug: Address is + 0x20 against spec. */

#define	WOL_CTRL_STAT	0x0f20	/* 16 bit WOL Control/Status Reg */
#define	WOL_MATCH_CTL	0x0f22	/*  8 bit WOL Match Control Reg */
#define	WOL_MATCH_RES	0x0f23	/*  8 bit WOL Match Result Reg */
#define	WOL_MAC_ADDR_LO	0x0f24	/* 32 bit WOL MAC Address Low */
#define	WOL_MAC_ADDR_HI	0x0f28	/* 16 bit WOL MAC Address High */
#define	WOL_PATT_PME	0x0f2a	/*  8 bit WOL PME Match Enable (Yukon-2) */
#define	WOL_PATT_ASFM	0x0f2b	/*  8 bit WOL ASF Match Enable (Yukon-2) */
#define	WOL_PATT_RPTR	0x0f2c	/*  8 bit WOL Pattern Read Pointer */

/* WOL Pattern Length Registers (YUKON only) */

#define	WOL_PATT_LEN_LO	0x0f30	/* 32 bit WOL Pattern Length 3..0 */
#define	WOL_PATT_LEN_HI	0x0f34	/* 24 bit WOL Pattern Length 6..4 */

/* WOL Pattern Counter Registers (YUKON only) */

#define	WOL_PATT_CNT_0	0x0f38	/* 32 bit WOL Pattern Counter 3..0 */
#define	WOL_PATT_CNT_4	0x0f3c	/* 24 bit WOL Pattern Counter 6..4 */

/*
 *	Bank 32	- 33
 */
#define	WOL_PATT_RAM_1	0x1000	/*  WOL Pattern RAM Link 1 */
#define	WOL_PATT_RAM_2	0x1400	/*  WOL Pattern RAM Link 2 */

/* offset to configuration space on Yukon-2 */
#define	Y2_CFG_SPC	0x1c00
#define	Y2_CFG_AER	0x1d00	/* Advanced Error Report region */
#define	AER_UNCOR_ERR	4	/* Uncorrectable Error Status */
#define	BASE_GMAC_1	0x2800	/* GMAC 1 registers */
#define	BASE_GMAC_2	0x3800	/* GMAC 2 registers */

/*
 *	Control Register Bit Definitions:
 */
/*	B0_CTST	24 bit	Control/Status register */
#define	Y2_VMAIN_AVAIL	BIT(17)	/* VMAIN available (YUKON-2 only) */
#define	Y2_VAUX_AVAIL	BIT(16)	/* VAUX available (YUKON-2 only) */
#define	Y2_HW_WOL_ON	BIT(15)	/* HW WOL On  (Yukon-EC Ultra A1 only) */
#define	Y2_HW_WOL_OFF	BIT(14)	/* HW WOL Off (Yukon-EC Ultra A1 only) */
#define	Y2_ASF_ENABLE	BIT(13)	/* ASF Unit Enable (YUKON-2 only) */
#define	Y2_ASF_DISABLE	BIT(12)	/* ASF Unit Disable (YUKON-2 only) */
#define	Y2_CLK_RUN_ENA	BIT(11)	/* CLK_RUN Enable  (YUKON-2 only) */
#define	Y2_CLK_RUN_DIS	BIT(10)	/* CLK_RUN Disable (YUKON-2 only) */
#define	Y2_LED_STAT_ON	BIT(9)	/* Status LED On  (YUKON-2 only) */
#define	Y2_LED_STAT_OFF	BIT(8)	/* Status LED Off (YUKON-2 only) */
#define	CS_ST_SW_IRQ	BIT(7)	/* Set IRQ SW Request */
#define	CS_CL_SW_IRQ	BIT(6)	/* Clear IRQ SW Request */
#define	CS_STOP_DONE	BIT(5)	/* Stop Master is finished */
#define	CS_STOP_MAST	BIT(4)	/* Command Bit to stop the master */
#define	CS_MRST_CLR	BIT(3)	/* Clear Master Reset */
#define	CS_MRST_SET	BIT(2)	/* Set	 Master Reset */
#define	CS_RST_CLR	BIT(1)	/* Clear Software Reset	*/
#define	CS_RST_SET	BIT(0)	/* Set	 Software Reset	*/

#define	LED_STAT_ON	BIT(1)	/* Status LED On	*/
#define	LED_STAT_OFF	BIT(0)	/* Status LED Off	*/

/* B0_POWER_CTRL	 8 Bit	Power Control reg (YUKON only) */
#define	PC_VAUX_ENA	BIT(7)	/* Switch VAUX Enable  */
#define	PC_VAUX_DIS	BIT(6)	/* Switch VAUX Disable */
#define	PC_VCC_ENA	BIT(5)	/* Switch VCC Enable  */
#define	PC_VCC_DIS	BIT(4)	/* Switch VCC Disable */
#define	PC_VAUX_ON	BIT(3)	/* Switch VAUX On  */
#define	PC_VAUX_OFF	BIT(2)	/* Switch VAUX Off */
#define	PC_VCC_ON	BIT(1)	/* Switch VCC On  */
#define	PC_VCC_OFF	BIT(0)	/* Switch VCC Off */

/*	B0_ISRC		32 bit	Interrupt Source Register */
/*	B0_IMSK		32 bit	Interrupt Mask Register */
/*	B0_SP_ISRC	32 bit	Special Interrupt Source Reg */
/*	B2_IRQM_MSK	32 bit	IRQ Moderation Mask */
/*	B0_Y2_SP_ISRC2	32 bit	Special Interrupt Source Reg 2 */
/*	B0_Y2_SP_ISRC3	32 bit	Special Interrupt Source Reg 3 */
/*	B0_Y2_SP_EISR	32 bit	Enter ISR Reg */
/*	B0_Y2_SP_LISR	32 bit	Leave ISR Reg */
#define	Y2_IS_PORT_MASK(Port, Mask)	((Mask) << (Port*8))
#define	Y2_IS_HW_ERR	BIT(31)	/* Interrupt HW Error */
#define	Y2_IS_STAT_BMU	BIT(30)	/* Status BMU Interrupt */
#define	Y2_IS_ASF	BIT(29)	/* ASF subsystem Interrupt */
#define	Y2_IS_POLL_CHK	BIT(27)	/* Check IRQ from polling unit */
#define	Y2_IS_TWSI_RDY	BIT(26)	/* IRQ on end of TWSI Tx */
#define	Y2_IS_IRQ_SW	BIT(25)	/* SW forced IRQ	*/
#define	Y2_IS_TIMINT	BIT(24)	/* IRQ from Timer	*/
#define	Y2_IS_IRQ_PHY2	BIT(12)	/* Interrupt from PHY 2 */
#define	Y2_IS_IRQ_MAC2	BIT(11)	/* Interrupt from MAC 2 */
#define	Y2_IS_CHK_RX2	BIT(10)	/* Descriptor error Rx 2 */
#define	Y2_IS_CHK_TXS2	BIT(9)	/* Descriptor error TXS 2 */
#define	Y2_IS_CHK_TXA2	BIT(8)	/* Descriptor error TXA 2 */
#define	Y2_IS_IRQ_PHY1	BIT(4)	/* Interrupt from PHY 1 */
#define	Y2_IS_IRQ_MAC1	BIT(3)	/* Interrupt from MAC 1 */
#define	Y2_IS_CHK_RX1	BIT(2)	/* Descriptor error Rx 1 */
#define	Y2_IS_CHK_TXS1	BIT(1)	/* Descriptor error TXS 1 */
#define	Y2_IS_CHK_TXA1	BIT(0)	/* Descriptor error TXA 1 */

#define	Y2_IS_L1_MASK	0x0000001f	/* IRQ Mask for port 1 */

#define	Y2_IS_L2_MASK	0x00001f00	/* IRQ Mask for port 2 */

#define	Y2_IS_ALL_MSK	0xef001f1f	/* All Interrupt bits */

#define	Y2_IS_PORT_A	(Y2_IS_IRQ_MAC1 | Y2_IS_CHK_TXA1 | Y2_IS_CHK_RX1)
#define	Y2_IS_PORT_B	(Y2_IS_IRQ_MAC2 | Y2_IS_CHK_TXA2 | Y2_IS_CHK_RX2)

/*	B0_HWE_ISRC	32 bit	HW Error Interrupt Src Reg */
/*	B0_HWE_IMSK	32 bit	HW Error Interrupt Mask Reg */
/*	B2_IRQM_HWE_MSK	32 bit	IRQ Moderation HW Error Mask */
#define	Y2_IS_TIST_OV	BIT(29)	/* Time Stamp Timer overflow interrupt */
#define	Y2_IS_SENSOR	BIT(28)	/* Sensor interrupt */
#define	Y2_IS_MST_ERR	BIT(27)	/* Master error interrupt */
#define	Y2_IS_IRQ_STAT	BIT(26)	/* Status exception interrupt */
#define	Y2_IS_PCI_EXP	BIT(25)	/* PCI-Express interrupt */
#define	Y2_IS_PCI_NEXP	BIT(24)	/* PCI-Express error similar to PCI error */
#define	Y2_IS_PAR_RD2	BIT(13)	/* Read RAM parity error interrupt */
#define	Y2_IS_PAR_WR2	BIT(12)	/* Write RAM parity error interrupt */
#define	Y2_IS_PAR_MAC2	BIT(11)	/* MAC hardware fault interrupt */
#define	Y2_IS_PAR_RX2	BIT(10)	/* Parity Error Rx Queue 2 */
#define	Y2_IS_TCP_TXS2	BIT(9)	/* TCP length mismatch sync Tx queue IRQ */
#define	Y2_IS_TCP_TXA2	BIT(8)	/* TCP length mismatch async Tx queue IRQ */
#define	Y2_IS_PAR_RD1	BIT(5)	/* Read RAM parity error interrupt */
#define	Y2_IS_PAR_WR1	BIT(4)	/* Write RAM parity error interrupt */
#define	Y2_IS_PAR_MAC1	BIT(3)	/* MAC hardware fault interrupt */
#define	Y2_IS_PAR_RX1	BIT(2)	/* Parity Error Rx Queue 1 */
#define	Y2_IS_TCP_TXS1	BIT(1)	/* TCP length mismatch sync Tx queue IRQ */
#define	Y2_IS_TCP_TXA1	BIT(0)	/* TCP length mismatch async Tx queue IRQ */

#define	Y2_HWE_L1_MASK	(Y2_IS_PAR_RD1 | Y2_IS_PAR_WR1 | Y2_IS_PAR_MAC1 |\
    Y2_IS_PAR_RX1 | Y2_IS_TCP_TXS1| Y2_IS_TCP_TXA1)
#define	Y2_HWE_L2_MASK	(Y2_IS_PAR_RD2 | Y2_IS_PAR_WR2 | Y2_IS_PAR_MAC2 |\
    Y2_IS_PAR_RX2 | Y2_IS_TCP_TXS2| Y2_IS_TCP_TXA2)

#define	Y2_HWE_ALL_MSK	(Y2_IS_TIST_OV | /* Y2_IS_SENSOR | */ Y2_IS_MST_ERR |\
    Y2_IS_IRQ_STAT | Y2_IS_PCI_EXP | Y2_IS_PCI_NEXP |\
    Y2_HWE_L1_MASK | Y2_HWE_L2_MASK)

/*	B2_MAC_CFG	 8 bit	MAC Configuration / Chip Revision */
#define	CFG_CHIP_R_MSK	(0x0f<<4) /* Bit 7.. 4: Chip Revision */
#define	CFG_DIS_M2_CLK	BIT(1)	/* Disable Clock for 2nd MAC */
#define	CFG_SNG_MAC	BIT(0)	/* MAC Config: 0 = 2 MACs; 1 = 1 MAC */

/*	B2_CHIP_ID	 8 bit	Chip Identification Number */
/*
 * Note the following four are not supported
 * as they are pre-yukon 2 chips
 */
#define	CHIP_ID_GENESIS		0x0a /* Chip ID for GENESIS */
#define	CHIP_ID_YUKON		0xb0 /* Chip ID for YUKON */
#define	CHIP_ID_YUKON_LITE	0xb1 /* Chip ID for YUKON-Lite (Rev. A1-A3) */
#define	CHIP_ID_YUKON_LP	0xb2 /* Chip ID for YUKON-LP */

#define	CHIP_ID_YUKON_XL	0xb3 /* Chip ID for YUKON-2 XL */
#define	CHIP_ID_YUKON_EC_U	0xb4 /* Chip ID for YUKON-2 EC Ultra */
#define	CHIP_ID_YUKON_EX	0xb5 /* Chip ID for YUKON-2 Extreme */
#define	CHIP_ID_YUKON_EC	0xb6 /* Chip ID for YUKON-2 EC */
#define	CHIP_ID_YUKON_FE	0xb7 /* Chip ID for YUKON-2 FE */
#define	CHIP_ID_YUKON_FE_P	0xb8 /* Chip ID for YUKON-2 FE+ */
#define	CHIP_ID_YUKON_SUPR	0xb9 /* Chip ID for YUKON-2 Supreme */
#define	CHIP_ID_YUKON_UL_2	0xba /* Chip ID for YUKON-2 Ultra 2 */

/* 8 bit Chip Revision Number */
#define	CHIP_REV_YU_LITE_A1	3 /* Chip Rev. for YUKON-Lite A1,A2 */
#define	CHIP_REV_YU_LITE_A3	7 /* Chip Rev. for YUKON-Lite A3 */

#define	CHIP_REV_YU_XL_A0	0 /* Chip Rev. for Yukon-2 A0 */
#define	CHIP_REV_YU_XL_A1	1 /* Chip Rev. for Yukon-2 A1 */
#define	CHIP_REV_YU_XL_A2	2 /* Chip Rev. for Yukon-2 A2 */
#define	CHIP_REV_YU_XL_A3	3 /* Chip Rev. for Yukon-2 A3 */

#define	CHIP_REV_YU_EC_A1	0 /* Chip Rev. for Yukon-EC A1/A0 */
#define	CHIP_REV_YU_EC_A2	1 /* Chip Rev. for Yukon-EC A2 */
#define	CHIP_REV_YU_EC_A3	2 /* Chip Rev. for Yukon-EC A3 */

#define	CHIP_REV_YU_EC_U_A0	1 /* Chip Rev. for Yukon-EC Ultra A0 */
#define	CHIP_REV_YU_EC_U_A1	2 /* Chip Rev. for Yukon-EC Ultra A1 */
#define	CHIP_REV_YU_EC_U_B0	3 /* Chip Rev. for Yukon-EC Ultra B0 */
#define	CHIP_REV_YU_EC_U_B1	5 /* Chip Rev. for Yukon-EC Ultra B1 */
#define	CHIP_REV_YU_FE_A1	1 /* Chip Rev. for Yukon-FE A1 */
#define	CHIP_REV_YU_FE_A2	3 /* Chip Rev. for Yukon-FE A2 */
#define	CHIP_REV_YU_EX_A0	1 /* Chip Rev. for Yukon-Extreme A0 */
#define	CHIP_REV_YU_EX_B0	2 /* Chip Rev. for Yukon-Extreme B0 */

#define	CHIP_REV_YU_SU_A0	0 /* Chip Rev. for Yukon-Supreme A0 */
#define	CHIP_REV_YU_SU_B0	1 /* Chip Rev. for Yukon-Supreme B0 */
#define	CHIP_REV_YU_SU_B1	3 /* Chip Rev. for Yukon-Supreme B1 */

#define	CHIP_REV_YU_FE2_A0	0

/* B2_Y2_CLK_GATE - 8 bit Clock Gating (Yukon-2 only) */
#define	Y2_STATUS_LNK2_INAC	BIT(7)	/* Status Link 2 inactiv (0 = activ) */
#define	Y2_CLK_GAT_LNK2_DIS	BIT(6)	/* Disable clock gating Link 2 */
#define	Y2_COR_CLK_LNK2_DIS	BIT(5)	/* Disable Core clock Link 2 */
#define	Y2_PCI_CLK_LNK2_DIS	BIT(4)	/* Disable PCI clock Link 2 */
#define	Y2_STATUS_LNK1_INAC	BIT(3)	/* Status Link 1 inactiv (0 = activ) */
#define	Y2_CLK_GAT_LNK1_DIS	BIT(2)	/* Disable clock gating Link 1 */
#define	Y2_COR_CLK_LNK1_DIS	BIT(1)	/* Disable Core clock Link 1 */
#define	Y2_PCI_CLK_LNK1_DIS	BIT(0)	/* Disable PCI clock Link 1 */

/*	B2_Y2_HW_RES	8 bit	HW Resources (Yukon-2 only) */
#define	CFG_LED_MODE_MSK	(0x07<<2)	/* Bit	4.. 2:	LED Mode Mask */
#define	CFG_LINK_2_AVAIL	BIT(1)	/* Link 2 available */
#define	CFG_LINK_1_AVAIL	BIT(0)	/* Link 1 available */

#define	CFG_LED_MODE(x)		(((x) & CFG_LED_MODE_MSK) >> 2)
#define	CFG_DUAL_MAC_MSK	(CFG_LINK_2_AVAIL | CFG_LINK_1_AVAIL)

/*	B2_E_3		8 bit	lower 4 bits used for HW self test result */
#define	B2_E3_RES_MASK	0x0f

/*	B2_Y2_CLK_CTRL	32 bit	Core Clck Frqncy Control Rgstr (Yukon-2/EC) */
/* Yukon-EC/FE */
#define	Y2_CLK_DIV_VAL_MSK	(0xff<<16) /* Bit 23..16: Clock Divisor Value */
#define	Y2_CLK_DIV_VAL(x)	((x << 16) & Y2_CLK_DIV_VAL_MSK)
/* Yukon-2 */
#define	Y2_CLK_DIV_VAL2_MSK	(0x07<<21) /* Bit 23..21: Clock Divisor Value */
#define	Y2_CLK_SELECT2_MSK	(0x1f<<16) /* Bit 20..16: Clock Select */
#define	Y2_CLK_DIV_VAL_2(x)	((x << 21) & Y2_CLK_DIV_VAL2_MSK)
#define	Y2_CLK_SEL_VAL_2(x)	((x << 16) & Y2_CLK_SELECT2_MSK)
#define	Y2_CLK_DIV_ENA		BIT(1)	/* Enable  Core Clock Division */
#define	Y2_CLK_DIV_DIS		BIT(0)	/* Disable Core Clock Division */

/*	B2_TI_CTRL	 8 bit	Timer control */
/*	B2_IRQM_CTRL	 8 bit	IRQ Moderation Timer Control */
#define	TIM_START	BIT(2)	/* Start Timer */
#define	TIM_STOP	BIT(1)	/* Stop	 Timer */
#define	TIM_CLR_IRQ	BIT(0)	/* Clear Timer IRQ (!IRQM) */

/*	B2_TI_TEST	 8 Bit	Timer Test */
/*	B2_IRQM_TEST	 8 bit	IRQ Moderation Timer Test */
/*	B28_DPT_TST	 8 bit	Descriptor Poll Timer Test Reg */
#define	TIM_T_ON	BIT(2)	/* Test mode on */
#define	TIM_T_OFF	BIT(1)	/* Test mode off */
#define	TIM_T_STEP	BIT(0)	/* Test step */

/*	B28_DPT_INI	32 bit	Descriptor Poll Timer Init Val */
/*	B28_DPT_VAL	32 bit	Descriptor Poll Timer Curr Val */
#define	DPT_MSK		0x00ffffff	/* Bit 23.. 0:	Desc Poll Timer Bits */

/*	B28_DPT_CTRL	 8 bit	Descriptor Poll Timer Ctrl Reg */
#define	DPT_START	BIT(1)	/* Start Descriptor Poll Timer */
#define	DPT_STOP	BIT(0)	/* Stop	 Descriptor Poll Timer */

/*	B2_TST_CTRL1	 8 bit	Test Control Register 1 */
#define	TST_FRC_DPERR_MR	BIT(7)	/* force DATAPERR on MST RD */
#define	TST_FRC_DPERR_MW	BIT(6)	/* force DATAPERR on MST WR */
#define	TST_FRC_DPERR_TR	BIT(5)	/* force DATAPERR on TRG RD */
#define	TST_FRC_DPERR_TW	BIT(4)	/* force DATAPERR on TRG WR */
#define	TST_FRC_APERR_M		BIT(3)	/* force ADDRPERR on MST */
#define	TST_FRC_APERR_T		BIT(2)	/* force ADDRPERR on TRG */
#define	TST_CFG_WRITE_ON	BIT(1)	/* Enable  Config Reg WR */
#define	TST_CFG_WRITE_OFF	BIT(0)	/* Disable Config Reg WR */

/*	B2_I2C_CTRL	32 bit	I2C HW Control Register */
#define	I2C_FLAG	BIT(31)		/* Start read/write if WR */
#define	I2C_ADDR	(0x7fff<<16)	/* Bit 30..16:	Addr to be RD/WR */
#define	I2C_DEV_SEL	(0x7f<<9)	/* Bit 15.. 9:	I2C Device Select */
#define	I2C_BURST_LEN	BIT(4)		/* Burst Len, 1/4 bytes */
#define	I2C_DEV_SIZE	(7<<1)		/* Bit	3.. 1:	I2C Device Size	*/
#define	I2C_025K_DEV	(0<<1)		/*		0: 256 Bytes or smal. */
#define	I2C_05K_DEV	(1<<1)		/*		1: 512	Bytes	*/
#define	I2C_1K_DEV	(2<<1)		/*		2: 1024 Bytes	*/
#define	I2C_2K_DEV	(3<<1)		/*		3: 2048	Bytes	*/
#define	I2C_4K_DEV	(4<<1)		/*		4: 4096 Bytes	*/
#define	I2C_8K_DEV	(5<<1)		/*		5: 8192 Bytes	*/
#define	I2C_16K_DEV	(6<<1)		/*		6: 16384 Bytes	*/
#define	I2C_32K_DEV	(7<<1)		/*		7: 32768 Bytes	*/
#define	I2C_STOP	BIT(0)		/* Interrupt I2C transfer */

/*	B2_I2C_IRQ	32 bit	I2C HW IRQ Register */
#define	I2C_CLR_IRQ	BIT(0)		/* Clear I2C IRQ */

/*	B2_I2C_SW	32 bit (8 bit access)	I2C HW SW Port Register */
#define	I2C_DATA_DIR	BIT(2)		/* direction of I2C_DATA */
#define	I2C_DATA	BIT(1)		/* I2C Data Port	*/
#define	I2C_CLK		BIT(0)		/* I2C Clock Port	*/

/* I2C Address */
#define	I2C_SENS_ADDR	LM80_ADDR	/* I2C Sensor Address (Volt and Temp) */


/*	B2_BSC_CTRL	 8 bit	Blink Source Counter Control */
#define	BSC_START	BIT(1)		/* Start Blink Source Counter */
#define	BSC_STOP	BIT(0)		/* Stop	 Blink Source Counter */

/*	B2_BSC_STAT	 8 bit	Blink Source Counter Status */
#define	BSC_SRC		BIT(0)		/* Blink Source, 0=Off / 1=On */

/*	B2_BSC_TST	16 bit	Blink Source Counter Test Reg */
#define	BSC_T_ON	BIT(2)		/* Test mode on */
#define	BSC_T_OFF	BIT(1)		/* Test mode off */
#define	BSC_T_STEP	BIT(0)		/* Test step */

/*	B2_GP_IO GLB_GPIO  0x015C  General Purpose I/O Register */
#define	GLB_GPIO_CLK_DEB_ENA		BIT(31)		/* Clock Debug Enable */
/*	Bit(s) GLB_GPIO_RSRV_30 reserved */
#define	GLB_GPIO_CLK_DBG_MSK		((0xf) << 26)    /* Clock Debug */
#define	GLB_GPIO_CLK_DBG_BASE		26
/*	Bit(s) GLB_GPIO_RSRV_25_16 reserved */
/* Disable Internal Reset after D3 to D0 */
#define	GLB_GPIO_INT_RST_D3_DIS		BIT(15)
#define	GLB_GPIO_LED_PAD_SPEED_UP	BIT(14)		/* LED PAD Speed Up */
#define	GLB_GPIO_STAT_RACE_DIS		BIT(13)	/* Status Race Disable */
#define	GLB_GPIO_TEST_SEL_MSK		((0x3) << 11)	/* Testmode Select */
#define	GLB_GPIO_TEST_SEL_BASE		11
#define	GLB_GPIO_RAND_ENA		BIT(10)		/* Random Enable */
#define	GLB_GPIO_RAND_BIT_1		BIT(9)		/* Random Bit 1 */
/* Bit(s) GLB_GPIO_RSRV_8_0 reserved */


/*	Y2_PEX_PHY_ADDR/DATA	PEX PHY address and data reg  (Yukon-2 only) */
#define	PEX_RD_ACCESS	BIT(31)	/* Access Mode Read = 1, Write = 0 */
#define	PEX_DB_ACCESS	BIT(30)	/* Access to debug register */

/*	B3_RAM_ADDR		32 bit	RAM Address, to read or write */
#define	RAM_ADR_RAN	0x0007ffff	/* Bit 18.. 0:	RAM Address Range */

/* RAM Interface Registers */
/*	B3_RI_CTRL		16 bit	RAM Interface Control Register */
#define	RI_CLR_RD_PERR	BIT(9)	/* Clear IRQ RAM Read  Parity Err */
#define	RI_CLR_WR_PERR	BIT(8)	/* Clear IRQ RAM Write Parity Err */
#define	RI_RST_CLR	BIT(1)	/* Clear RAM Interface Reset */
#define	RI_RST_SET	BIT(0)	/* Set	 RAM Interface Reset */

#define	RI_TO_53	36	/* RAM interface timeout */

/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */
/*	TXA_ITI_INI	32 bit	Tx Arb Interval Timer Init Val */
/*	TXA_ITI_VAL	32 bit	Tx Arb Interval Timer Value */
/*	TXA_LIM_INI	32 bit	Tx Arb Limit Counter Init Val */
/*	TXA_LIM_VAL	32 bit	Tx Arb Limit Counter Value */
#define	TXA_MAX_VAL	0x00ffffff /* Bit 23.. 0: Max TXA Timer/Cnt Val */

/*	TXA_CTRL	 8 bit	Tx Arbiter Control Register */
#define	TXA_ENA_FSYNC	BIT(7)	/* Enable  force of sync Tx queue */
#define	TXA_DIS_FSYNC	BIT(6)	/* Disable force of sync Tx queue */
#define	TXA_ENA_ALLOC	BIT(5)	/* Enable  alloc of free bandwidth */
#define	TXA_DIS_ALLOC	BIT(4)	/* Disable alloc of free bandwidth */
#define	TXA_START_RC	BIT(3)	/* Start sync Rate Control */
#define	TXA_STOP_RC	BIT(2)	/* Stop	 sync Rate Control */
#define	TXA_ENA_ARB	BIT(1)	/* Enable  Tx Arbiter */
#define	TXA_DIS_ARB	BIT(0)	/* Disable Tx Arbiter */

/*	TXA_TEST	 8 bit	Tx Arbiter Test Register */
#define	TXA_INT_T_ON	BIT(5)	/* Tx Arb Interval Timer Test On */
#define	TXA_INT_T_OFF	BIT(4)	/* Tx Arb Interval Timer Test Off */
#define	TXA_INT_T_STEP	BIT(3)	/* Tx Arb Interval Timer Step */
#define	TXA_LIM_T_ON	BIT(2)	/* Tx Arb Limit Timer Test On */
#define	TXA_LIM_T_OFF	BIT(1)	/* Tx Arb Limit Timer Test Off */
#define	TXA_LIM_T_STEP	BIT(0)	/* Tx Arb Limit Timer Step */

/*	TXA_STAT	 8 bit	Tx Arbiter Status Register */
#define	TXA_PRIO_XS	BIT(0)	/* sync queue has prio to send */

/*	Q_BC		32 bit	Current Byte Counter */
#define	BC_MAX		0xffff	/* Bit 15.. 0:	Byte counter */

/* Rx BMU Control / Status Registers (Yukon-2) */
#define	BMU_IDLE		BIT(31)	/* BMU Idle State */
#define	BMU_RX_TCP_PKT		BIT(30)	/* Rx TCP Packet (when RSS Hash enab) */
#define	BMU_RX_IP_PKT		BIT(29)	/* Rx IP  Packet (when RSS Hash enab) */
#define	BMU_ENA_RX_RSS_HASH	BIT(15)	/* Enable  Rx RSS Hash */
#define	BMU_DIS_RX_RSS_HASH	BIT(14)	/* Disable Rx RSS Hash */
#define	BMU_ENA_RX_CHKSUM	BIT(13)	/* Enable  Rx TCP/IP Checksum Check */
#define	BMU_DIS_RX_CHKSUM	BIT(12)	/* Disable Rx TCP/IP Checksum Check */
#define	BMU_CLR_IRQ_PAR		BIT(11)	/* Clear IRQ on Parity errors (Rx) */
#define	BMU_CLR_IRQ_TCP		BIT(11)	/* Clear IRQ on TCP seg. error (Tx) */
#define	BMU_CLR_IRQ_CHK		BIT(10)	/* Clear IRQ Check */
#define	BMU_STOP		BIT(9)	/* Stop	 Rx/Tx Queue */
#define	BMU_START		BIT(8)	/* Start Rx/Tx Queue */
#define	BMU_FIFO_OP_ON		BIT(7)	/* FIFO Operational On */
#define	BMU_FIFO_OP_OFF		BIT(6)	/* FIFO Operational Off */
#define	BMU_FIFO_ENA		BIT(5)	/* Enable FIFO */
#define	BMU_FIFO_RST		BIT(4)	/* Reset  FIFO */
#define	BMU_OP_ON		BIT(3)	/* BMU Operational On */
#define	BMU_OP_OFF		BIT(2)	/* BMU Operational Off */
#define	BMU_RST_CLR		BIT(1)	/* Clear BMU Reset (Enable) */
#define	BMU_RST_SET		BIT(0)	/* Set	 BMU Reset */

#define	BMU_CLR_RESET		(BMU_FIFO_RST | BMU_OP_OFF | BMU_RST_CLR)
#define	BMU_OPER_INIT		(BMU_CLR_IRQ_PAR | BMU_CLR_IRQ_CHK | \
    BMU_START | BMU_FIFO_ENA | BMU_OP_ON)

/* Tx BMU Control / Status Registers (Yukon-2) */
					/* Bit 31: same as for Rx */
#define	BMU_TX_IPIDINCR_ON	BIT(13)	/* Enable  IP ID Increment */
#define	BMU_TX_IPIDINCR_OFF	BIT(12)	/* Disable IP ID Increment */
#define	BMU_TX_CLR_IRQ_TCP	BIT(11)	/* Clear IRQ on TCP segm. len mism. */
					/* Bit 10..0: same as for Rx */

/*	Q_F		32 bit	Flag Register */
#define	F_TX_CHK_AUTO_OFF	BIT(31)	/* Tx csum auto-calc Off (Yukon EX) */
#define	F_TX_CHK_AUTO_ON	BIT(30)	/* Tx csum auto-calc On (Yukon EX) */
#define	F_ALM_FULL		BIT(27)	/* Rx FIFO: almost full */
#define	F_EMPTY			BIT(27)	/* Tx FIFO: empty flag */
#define	F_FIFO_EOF		BIT(26)	/* Tag (EOF Flag) bit in FIFO */
#define	F_WM_REACHED		BIT(25)	/* Watermark reached */
#define	F_M_RX_RAM_DIS		BIT(24)	/* MAC Rx RAM Read Port disable */
#define	F_FIFO_LEVEL	(0x1f<<16)	/* Bit 23..16:	# of Qwords in FIFO */
#define	F_WATER_MARK	0x0007ff	/* Bit 10.. 0:	Watermark */

/* Queue Prefetch Unt Offsts, use Y2_PREF_Q_ADDR() to addrss (Yukon-2 only) */
/* PREF_UNIT_CTRL_REG	32 bit	Prefetch Control register */
#define	PREF_UNIT_OP_ON		BIT(3)	/* prefetch unit operational */
#define	PREF_UNIT_OP_OFF	BIT(2)	/* prefetch unit not operational */
#define	PREF_UNIT_RST_CLR	BIT(1)	/* Clear Prefetch Unit Reset */
#define	PREF_UNIT_RST_SET	BIT(0)	/* Set	 Prefetch Unit Reset */

/* RAM Buffer Register Offsets, use RB_ADDR(Queue, Offs) to access */
/*	RB_START	32 bit	RAM Buffer Start Address */
/*	RB_END		32 bit	RAM Buffer End Address */
/*	RB_WP		32 bit	RAM Buffer Write Pointer */
/*	RB_RP		32 bit	RAM Buffer Read Pointer */
/*	RB_RX_UTPP	32 bit	Rx Upper Threshold, Pause Pack */
/*	RB_RX_LTPP	32 bit	Rx Lower Threshold, Pause Pack */
/*	RB_RX_UTHP	32 bit	Rx Upper Threshold, High Prio */
/*	RB_RX_LTHP	32 bit	Rx Lower Threshold, High Prio */
/*	RB_PC		32 bit	RAM Buffer Packet Counter */
/*	RB_LEV		32 bit	RAM Buffer Level Register */
#define	RB_MSK	0x0007ffff	/* Bit 18.. 0:	RAM Buffer Pointer Bits */

/*	RB_TST2		 8 bit	RAM Buffer Test Register 2 */
#define	RB_PC_DEC	BIT(3)	/* Packet Counter Decrement */
#define	RB_PC_T_ON	BIT(2)	/* Packet Counter Test On */
#define	RB_PC_T_OFF	BIT(1)	/* Packet Counter Test Off */
#define	RB_PC_INC	BIT(0)	/* Packet Counter Increment */

/*	RB_TST1		 8 bit	RAM Buffer Test Register 1 */
#define	RB_WP_T_ON	BIT(6)	/* Write Pointer Test On */
#define	RB_WP_T_OFF	BIT(5)	/* Write Pointer Test Off */
#define	RB_WP_INC	BIT(4)	/* Write Pointer Increment */
#define	RB_RP_T_ON	BIT(2)	/* Read Pointer Test On */
#define	RB_RP_T_OFF	BIT(1)	/* Read Pointer Test Off */
#define	RB_RP_INC	BIT(0)	/* Read Pointer Increment */

/*	RB_CTRL		 8 bit	RAM Buffer Control Register */
#define	RB_ENA_STFWD	BIT(5)	/* Enable  Store & Forward */
#define	RB_DIS_STFWD	BIT(4)	/* Disable Store & Forward */
#define	RB_ENA_OP_MD	BIT(3)	/* Enable  Operation Mode */
#define	RB_DIS_OP_MD	BIT(2)	/* Disable Operation Mode */
#define	RB_RST_CLR	BIT(1)	/* Clear RAM Buf STM Reset */
#define	RB_RST_SET	BIT(0)	/* Set	 RAM Buf STM Reset */

/* RAM Buffer High Pause Threshold values */
#define	RB_ULPP		(8 * 1024)	/* Upper Level in kB/8 */
#define	RB_LLPP_S	(10 * 1024)	/* Lower Level for small Queues */
#define	RB_LLPP_B	(16 * 1024)	/* Lower Level for big Queues */

/* Threshold values for Yukon-EC Ultra */
#define	MSK_ECU_ULPP	0x0080	/* Upper Pause Threshold (multiples of 8) */
#define	MSK_FEP_ULPP	0x00c4	/* For HWF_WA_DEV_521 */
#define	MSK_DEV521_ULPP 0x00c4  /* Upper Pause Threshold for Dev. 5.21 */
#define	MSK_EXT_ULPP    0x05c0  /* Upper Pause Threshold (multiples of 8) */
#define	MSK_ECU_LLPP	0x0060	/* Lower Pause Threshold (multiples of 8) */
#define	MSK_ECU_AE_THR	0x0070	/* Almost Empty Threshold */
#define	MSK_ECU_TXFF_LEV	0x01a0	/* Tx BMU FIFO Level */
#define	MSK_ECU_JUMBO_WM	0x01

#define	MSK_BMU_RX_WM		0x600	/* BMU Rx Watermark */
#define	MSK_BMU_TX_WM		0x600	/* BMU Tx Watermark */
/* performance sensitive drivers should set this define to 0x80 */
#define	MSK_BMU_RX_WM_PEX	0x600	/* BMU Rx Watermark for PEX */

/* Receive and Transmit Queues */
#define	Q_R1		0x0000	/* Receive Queue 1 */
#define	Q_R2		0x0080	/* Receive Queue 2 */
#define	Q_XS1		0x0200	/* Synchronous Transmit Queue 1 */
#define	Q_XA1		0x0280	/* Asynchronous Transmit Queue 1 */
#define	Q_XS2		0x0300	/* Synchronous Transmit Queue 2 */
#define	Q_XA2		0x0380	/* Asynchronous Transmit Queue 2 */

#define	Q_ASF_R1	0x100	/* ASF Rx Queue 1 */
#define	Q_ASF_R2	0x180	/* ASF Rx Queue 2 */
#define	Q_ASF_T1	0x140	/* ASF Tx Queue 1 */
#define	Q_ASF_T2	0x1c0	/* ASF Tx Queue 2 */

#define	RB_ADDR(Queue, Offs)	(B16_RAM_REGS + (Queue) + (Offs))

/* Minimum RAM Buffer Rx Queue Size */
#define	MSK_MIN_RXQ_SIZE	10
/* Minimum RAM Buffer Tx Queue Size */
#define	MSK_MIN_TXQ_SIZE	10
/* Percentage of queue size from whole memory. 80 % for receive */
#define	MSK_RAM_QUOTA_RX	80

/*	WOL_CTRL_STAT	16 bit	WOL Control/Status Reg */
#define	WOL_CTL_LINK_CHG_OCC		BIT(15)
#define	WOL_CTL_MAGIC_PKT_OCC		BIT(14)
#define	WOL_CTL_PATTERN_OCC		BIT(13)
#define	WOL_CTL_CLEAR_RESULT		BIT(12)
#define	WOL_CTL_ENA_PME_ON_LINK_CHG	BIT(11)
#define	WOL_CTL_DIS_PME_ON_LINK_CHG	BIT(10)
#define	WOL_CTL_ENA_PME_ON_MAGIC_PKT	BIT(9)
#define	WOL_CTL_DIS_PME_ON_MAGIC_PKT	BIT(8)
#define	WOL_CTL_ENA_PME_ON_PATTERN	BIT(7)
#define	WOL_CTL_DIS_PME_ON_PATTERN	BIT(6)
#define	WOL_CTL_ENA_LINK_CHG_UNIT	BIT(5)
#define	WOL_CTL_DIS_LINK_CHG_UNIT	BIT(4)
#define	WOL_CTL_ENA_MAGIC_PKT_UNIT	BIT(3)
#define	WOL_CTL_DIS_MAGIC_PKT_UNIT	BIT(2)
#define	WOL_CTL_ENA_PATTERN_UNIT	BIT(1)
#define	WOL_CTL_DIS_PATTERN_UNIT	BIT(0)

#define	WOL_CTL_DEFAULT				\
	(WOL_CTL_DIS_PME_ON_LINK_CHG |	\
	WOL_CTL_DIS_PME_ON_PATTERN |	\
	WOL_CTL_DIS_PME_ON_MAGIC_PKT |	\
	WOL_CTL_DIS_LINK_CHG_UNIT |	\
	WOL_CTL_DIS_PATTERN_UNIT |		\
	WOL_CTL_DIS_MAGIC_PKT_UNIT)

/*	WOL_MATCH_CTL	 8 bit	WOL Match Control Reg */
#define	WOL_CTL_PATT_ENA(x)	(BIT(0) << (x))

/*	WOL_PATT_PME	8 bit	WOL PME Match Enable (Yukon-2) */
#define	WOL_PATT_FORCE_PME	BIT(7)	/* Generates a PME */
#define	WOL_PATT_MATCH_PME_ALL	0x7f


/*
 * Marvell-PHY Registers, indirect addressed over GMAC
 */
	/* Marvell-specific registers */
	/* 0x0b - 0x0e:		reserved */
#define	PHY_MARV_EXT_STAT	0x0f	/* 16 bit r/o	Extended Status */
#define	PHY_MARV_PHY_CTRL	0x10	/* 16 bit r/w	PHY Specific Control */
#define	PHY_MARV_PHY_STAT	0x11	/* 16 bit r/o	PHY Specific Status  */
#define	PHY_MARV_INT_MASK	0x12	/* 16 bit r/w	Interrupt Mask */
#define	PHY_MARV_INT_STAT	0x13	/* 16 bit r/o	Interrupt Status Reg */
#define	PHY_MARV_EXT_CTRL	0x14	/* 16 bit r/w	Ext. PHY Specific */
#define	PHY_MARV_RXE_CNT	0x15	/* 16 bit r/w	Receive Error Counter */
#define	PHY_MARV_EXT_ADR	0x16	/* 16 bit r/w	Ext. Ad. (Cable Diag) */
#define	PHY_MARV_PORT_IRQ	0x17	/* 16 bit r/o	Port 0 IRQ (88E1111) */
#define	PHY_MARV_LED_CTRL	0x18	/* 16 bit r/w	LED Control */
#define	PHY_MARV_LED_OVER	0x19	/* 16 bit r/w	Manual LED Override */
#define	PHY_MARV_EXT_CTRL_2	0x1a	/* 16 bit r/w	Ext. PHY Spec. Ctrl 2 */
#define	PHY_MARV_EXT_P_STAT	0x1b	/* 16 bit r/w	Ext. PHY Spec. Stat */
#define	PHY_MARV_CABLE_DIAG	0x1c	/* 16 bit r/o	Cable Diagnostic */
#define	PHY_MARV_PAGE_ADDR	0x1d	/* 16 bit r/w	Extended Page Addr */
#define	PHY_MARV_PAGE_DATA	0x1e	/* 16 bit r/w	Extended Page Data */

/* for 10/100 Fast Ethernet PHY (88E3082 only) */
#define	PHY_MARV_FE_LED_PAR	0x16	/* 16 bit r/w	LED Parallel Select */
#define	PHY_MARV_FE_LED_SER	0x17	/* 16 bit r/w	LED Stream Sel S. LED */
#define	PHY_MARV_FE_VCT_TX	0x1a	/* 16 bit r/w	VCT Reg. for TXP/N */
#define	PHY_MARV_FE_VCT_RX	0x1b	/* 16 bit r/o	VCT Reg. for RXP/N */
#define	PHY_MARV_FE_SPEC_2	0x1c	/* 16 bit r/w	Specific Ctrl Reg. 2 */


#define	PHY_MARV_ID1_B0		0x0C23	/* Yukon (PHY 88E1011) */
#define	PHY_MARV_ID1_B2		0x0C25	/* Yukon-Plus (PHY 88E1011) */
#define	PHY_MARV_ID1_C2		0x0CC2	/* Yukon-EC (PHY 88E1111) */
#define	PHY_MARV_ID1_Y2		0x0C91	/* Yukon-2 (PHY 88E1112) */
#define	PHY_MARV_ID1_FE		0x0C83	/* Yukon-FE (PHY 88E3082 Rev.A1) */
#define	PHY_MARV_ID1_ECU	0x0CB0	/* Yukon-2 (PHY 88E1149 Rev.B2?) */


/*	PHY_MARV_PHY_CTRL	16 bit r/w	PHY Specific Ctrl Reg */
#define	PHY_M_PC_TX_FFD_MSK	(3<<14)	/* Bit 15..14: Tx FIFO Depth Mask */
#define	PHY_M_PC_RX_FFD_MSK	(3<<12)	/* Bit 13..12: Rx FIFO Depth Mask */
#define	PHY_M_PC_ASS_CRS_TX	BIT(11)	/* Assert CRS on Transmit */
#define	PHY_M_PC_FL_GOOD	BIT(10)	/* Force Link Good */
#define	PHY_M_PC_EN_DET_MSK	(3<<8)	/* Bit	9.. 8: Energy Detect Mask */
#define	PHY_M_PC_ENA_EXT_D	BIT(7)	/* Enable Ext. Distance (10BT) */
#define	PHY_M_PC_MDIX_MSK	(3<<5)	/* Bit	6.. 5: MDI/MDIX Config. Mask */
#define	PHY_M_PC_DIS_125CLK	BIT(4)	/* Disable 125 CLK */
#define	PHY_M_PC_MAC_POW_UP	BIT(3)	/* MAC Power up */
#define	PHY_M_PC_SQE_T_ENA	BIT(2)	/* SQE Test Enabled */
#define	PHY_M_PC_POL_R_DIS	BIT(1)	/* Polarity Reversal Disabled */
#define	PHY_M_PC_DIS_JABBER	BIT(0)	/* Disable Jabber */

#define	PHY_M_PC_EN_DET		(2 << 8)	/* Energy Detect (Mode 1) */
#define	PHY_M_PC_EN_DET_PLUS	(3 << 8)	/* Energy Det Plus (Mode 2) */

#define	PHY_M_PC_MDI_XMODE(x)	((x << 5) & PHY_M_PC_MDIX_MSK)

#define	PHY_M_PC_MAN_MDI	0	/* 00 = Manual MDI configuration */
#define	PHY_M_PC_MAN_MDIX	1	/* 01 = Manual MDIX configuration */
#define	PHY_M_PC_ENA_AUTO	3	/* 11 = Enable Automatic Crossover */

/* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */
#define	PHY_M_PC_DIS_LINK_P	BIT(15)	/* Disable Link Pulses */
#define	PHY_M_PC_DSC_MSK	(7<<12)	/* Bit 14..12:	Downshift Counter */
#define	PHY_M_PC_DOWN_S_ENA	BIT(11)	/* Downshift Enable */
					/* !!! Errata in spec. (1 = disable) */
#define	PHY_M_PC_COP_TX_DIS	BIT(3)
#define	PHY_M_PC_POW_D_ENA	BIT(2)

#define	PHY_M_PC_DSC(x)		((x << 12) & PHY_M_PC_DSC_MSK)
					/* 000=1x; 001=2x; 010=3x; 011=4x */
					/* 100=5x; 101=6x; 110=7x; 111=8x */

/* for 10/100 Fast Ethernet PHY (88E3082 only) */
#define	PHY_M_PC_ENA_DTE_DT	BIT(15)	/* Enable (DTE) Detect */
#define	PHY_M_PC_ENA_ENE_DT	BIT(14)	/* Enable Energy Det (sense & pulse) */
#define	PHY_M_PC_DIS_NLP_CK	BIT(13)	/* Dis. Normal Link Puls (NLP) Check */
#define	PHY_M_PC_ENA_LIP_NP	BIT(12)	/* Enable Link Partner Next Page Reg. */
#define	PHY_M_PC_DIS_NLP_GN	BIT(11)	/* Dis. Normal Link Puls Generation */
#define	PHY_M_PC_DIS_SCRAMB	BIT(9)	/* Dis. Scrambler */
#define	PHY_M_PC_DIS_FEFI	BIT(8)	/* Dis. Far End Fault Indic. (FEFI) */
#define	PHY_M_PC_SH_TP_SEL	BIT(6)	/* Shielded Twisted Pair Select */
#define	PHY_M_PC_RX_FD_MSK	(3<<2)	/* Bit	3.. 2: Rx FIFO Depth Mask */

/*	PHY_MARV_PHY_STAT	16 bit r/o	PHY Specific Status Reg */
#define	PHY_M_PS_SPEED_MSK	(3<<14)	/* Bit 15..14: Speed Mask */
#define	PHY_M_PS_SPEED_1000	BIT(15)	/*	10 = 1000 Mbps */
#define	PHY_M_PS_SPEED_100	BIT(14)	/*	01 =  100 Mbps */
#define	PHY_M_PS_SPEED_10	0	/*	00 =   10 Mbps */
#define	PHY_M_PS_FULL_DUP	BIT(13)	/* Full Duplex */
#define	PHY_M_PS_PAGE_REC	BIT(12)	/* Page Received */
#define	PHY_M_PS_SPDUP_RES	BIT(11)	/* Speed & Duplex Resolved */
#define	PHY_M_PS_LINK_UP	BIT(10)	/* Link Up */
#define	PHY_M_PS_CABLE_MSK	(7<<7)	/* Bit	9.. 7: Cable Length Mask */
#define	PHY_M_PS_MDI_X_STAT	BIT(6)	/* MDI Crossover Stat (1=MDIX) */
#define	PHY_M_PS_DOWNS_STAT	BIT(5)	/* Downshift Status (1=downsh.) */
#define	PHY_M_PS_ENDET_STAT	BIT(4)	/* Energy Detect Status (1=act) */
#define	PHY_M_PS_TX_P_EN	BIT(3)	/* Tx Pause Enabled */
#define	PHY_M_PS_RX_P_EN	BIT(2)	/* Rx Pause Enabled */
#define	PHY_M_PS_POL_REV	BIT(1)	/* Polarity Reversed */
#define	PHY_M_PS_JABBER		BIT(0)	/* Jabber */

#define	PHY_M_PS_PAUSE_MSK	(PHY_M_PS_TX_P_EN | PHY_M_PS_RX_P_EN)

/* for 10/100 Fast Ethernet PHY (88E3082 only) */
#define	PHY_M_PS_DTE_DETECT	BIT(15)	/* DTE Detected */
#define	PHY_M_PS_RES_SPEED	BIT(14)	/* Resolved Speed (1=100, 0=10) */

/*	PHY_MARV_INT_MASK	16 bit r/w	Interrupt Mask Reg */
/*	PHY_MARV_INT_STAT	16 bit r/o	Interrupt Status Reg */
#define	PHY_M_IS_AN_ERROR	BIT(15)	/* Auto-Negotiation Error */
#define	PHY_M_IS_LSP_CHANGE	BIT(14)	/* Link Speed Changed */
#define	PHY_M_IS_DUP_CHANGE	BIT(13)	/* Duplex Mode Changed */
#define	PHY_M_IS_AN_PR		BIT(12)	/* Page Received */
#define	PHY_M_IS_AN_COMPL	BIT(11)	/* Auto-Negotiation Completed */
#define	PHY_M_IS_LST_CHANGE	BIT(10)	/* Link Status Changed */
#define	PHY_M_IS_SYMB_ERROR	BIT(9)	/* Symbol Error */
#define	PHY_M_IS_FALSE_CARR	BIT(8)	/* False Carrier */
#define	PHY_M_IS_FIFO_ERROR	BIT(7)	/* FIFO Overflow/Underrun Error */
#define	PHY_M_IS_MDI_CHANGE	BIT(6)	/* MDI Crossover Changed */
#define	PHY_M_IS_DOWNSH_DET	BIT(5)	/* Downshift Detected */
#define	PHY_M_IS_END_CHANGE	BIT(4)	/* Energy Detect Changed */
#define	PHY_M_IS_DTE_CHANGE	BIT(2)	/* DTE Power Det. Status Changed */
#define	PHY_M_IS_POL_CHANGE	BIT(1)	/* Polarity Changed */
#define	PHY_M_IS_JABBER		BIT(0)	/* Jabber */

#define	PHY_M_DEF_MSK		(PHY_M_IS_AN_ERROR | PHY_M_IS_AN_PR | \
				PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR)
#define	PHY_M_NEG_MSK		(PHY_M_IS_AN_ERROR | PHY_M_IS_AN_COMPL | \
				PHY_M_IS_LST_CHANGE)

/*	PHY_MARV_EXT_CTRL	16 bit r/w	Ext. PHY Specific Ctrl */
#define	PHY_M_EC_ENA_BC_EXT	BIT(15)	/* Enbl Blck Car. Ext. (88E1111 only) */
#define	PHY_M_EC_ENA_LIN_LB	BIT(14)	/* Enbl Line Loopback (88E1111 only) */
#define	PHY_M_EC_DIS_LINK_P	BIT(12)	/* Disable Link Pulses (88E1111 only) */
#define	PHY_M_EC_M_DSC_MSK	(3<<10)	/* Bit 11..10:	Mstr Downshift Cntr */
					/* (88E1011 only) */
#define	PHY_M_EC_S_DSC_MSK	(3<<8)	/* Bit	9.. 8:	Slv  Downshift Cntr */
					/* (88E1011 only) */
#define	PHY_M_EC_DSC_MSK_2	(7<<9)	/* Bit 11.. 9:	Downshift Counter */
					/* (88E1111 only) */
#define	PHY_M_EC_DOWN_S_ENA	BIT(8)	/* Downshift Enable (88E1111 only) */
					/* !!! Errata in spec. (1 = disable) */
#define	PHY_M_EC_RX_TIM_CT	BIT(7)	/* RGMII Rx Timing Control */
#define	PHY_M_EC_MAC_S_MSK	(7<<4)	/* Bit	6.. 4:	Def. MAC inter speed */
#define	PHY_M_EC_FIB_AN_ENA	BIT(3)	/* Fbr Aut-Neg. Enbl (88E1011S only) */
#define	PHY_M_EC_DTE_D_ENA	BIT(2)	/* DTE Detect Enable (88E1111 only) */
#define	PHY_M_EC_TX_TIM_CT	BIT(1)	/* RGMII Tx Timing Control */
#define	PHY_M_EC_TRANS_DIS	BIT(0)	/* Transttr Disable (88E1111 only) */

#define	PHY_M_EC_M_DSC(x)	((x << 10) & PHY_M_EC_M_DSC_MSK)
					/* 00=1x; 01=2x; 10=3x; 11=4x */
#define	PHY_M_EC_S_DSC(x)	((x << 8) & PHY_M_EC_S_DSC_MSK)
					/* 00=dis; 01=1x; 10=2x; 11=3x */
#define	PHY_M_EC_MAC_S(x)	((x << 4) & PHY_M_EC_MAC_S_MSK)
					/* 01X=0; 110=2.5; 111=25 (MHz) */

#define	PHY_M_EC_DSC_2(x)	((x << 9) & PHY_M_EC_DSC_MSK_2)
					/* 000=1x; 001=2x; 010=3x; 011=4x */
					/* 100=5x; 101=6x; 110=7x; 111=8x */
#define	MAC_TX_CLK_0_MHZ	2
#define	MAC_TX_CLK_2_5_MHZ	6
#define	MAC_TX_CLK_25_MHZ	7

/*	PHY_MARV_LED_CTRL	16 bit r/w	LED Control Reg */
#define	PHY_M_LEDC_DIS_LED	BIT(15)	/* Disable LED */
#define	PHY_M_LEDC_PULS_MSK	(7<<12)	/* Bit 14..12: Pulse Stretch Mask */
#define	PHY_M_LEDC_F_INT	BIT(11)	/* Force Interrupt */
#define	PHY_M_LEDC_BL_R_MSK	(7<<8)	/* Bit 10.. 8: Blink Rate Mask */
#define	PHY_M_LEDC_DP_C_LSB	BIT(7)	/* Duplex Control (LSB, 88E1111 only) */
#define	PHY_M_LEDC_TX_C_LSB	BIT(6)	/* Tx Control (LSB, 88E1111 only) */
#define	PHY_M_LEDC_LK_C_MSK	(7<<3)	/* Bit	5.. 3: Link Control Mask */
					/* (88E1111 only) */
#define	PHY_M_LEDC_LINK_MSK	(3<<3)	/* Bit	4.. 3: Link Control Mask */
					/* (88E1011 only) */
#define	PHY_M_LEDC_DP_CTRL	BIT(2)	/* Duplex Control */
#define	PHY_M_LEDC_DP_C_MSB	BIT(2)	/* Duplex Control (MSB, 88E1111 only) */
#define	PHY_M_LEDC_RX_CTRL	BIT(1)	/* Rx Activity / Link */
#define	PHY_M_LEDC_TX_CTRL	BIT(0)	/* Tx Activity / Link */
#define	PHY_M_LEDC_TX_C_MSB	BIT(0)	/* Tx Control (MSB, 88E1111 only) */

#define	PHY_M_LED_PULS_DUR(x)	((x << 12) & PHY_M_LEDC_PULS_MSK)

#define	PULS_NO_STR		0	/* no pulse stretching */
#define	PULS_21MS		1	/* 21 ms to 42 ms */
#define	PULS_42MS		2	/* 42 ms to 84 ms */
#define	PULS_84MS		3	/* 84 ms to 170 ms */
#define	PULS_170MS		4	/* 170 ms to 340 ms */
#define	PULS_340MS		5	/* 340 ms to 670 ms */
#define	PULS_670MS		6	/* 670 ms to 1.3 s */
#define	PULS_1300MS		7	/* 1.3 s to 2.7 s */

#define	PHY_M_LED_BLINK_RT(x)	((x << 8) & PHY_M_LEDC_BL_R_MSK)

#define	BLINK_42MS		0	/* 42 ms */
#define	BLINK_84MS		1	/* 84 ms */
#define	BLINK_170MS		2	/* 170 ms */
#define	BLINK_340MS		3	/* 340 ms */
#define	BLINK_670MS		4	/* 670 ms */

/*	PHY_MARV_LED_OVER	16 bit r/w	Manual LED Override Reg */
#define	PHY_M_LED_MO_SGMII(x)	(x << 14)	/* Bit 15..14:	SGMII AN Tmr */
#define	PHY_M_LED_MO_DUP(x)	(x << 10)	/* Bit 11..10:	Duplex */
#define	PHY_M_LED_MO_10(x)	(x << 8)	/* Bit	9.. 8:	Link 10 */
#define	PHY_M_LED_MO_100(x)	(x << 6)	/* Bit	7.. 6:	Link 100 */
#define	PHY_M_LED_MO_1000(x)	(x << 4)	/* Bit	5.. 4:	Link 1000 */
#define	PHY_M_LED_MO_RX(x)	(x << 2)	/* Bit	3.. 2:	Rx */
#define	PHY_M_LED_MO_TX(x)	(x)		/* Bit	1.. 0:	Tx */

#define	MO_LED_NORM		0
#define	MO_LED_BLINK		1
#define	MO_LED_OFF		2
#define	MO_LED_ON		3

/*	PHY_MARV_EXT_CTRL_2	16 bit r/w	Ext. PHY Specific Ctrl 2 */
#define	PHY_M_EC2_FI_IMPED	BIT(6)	/* Fiber Input	Impedance */
#define	PHY_M_EC2_FO_IMPED	BIT(5)	/* Fiber Output Impedance */
#define	PHY_M_EC2_FO_M_CLK	BIT(4)	/* Fiber Mode Clock Enable */
#define	PHY_M_EC2_FO_BOOST	BIT(3)	/* Fiber Output Boost */
#define	PHY_M_EC2_FO_AM_MSK	7	/* Bit	2.. 0:	Fiber Otpt Amplitude */

/*	PHY_MARV_EXT_P_STAT 16 bit r/w	Ext. PHY Specific Status */
#define	PHY_M_FC_AUTO_SEL	BIT(15)	/* Fiber/Copper Auto Sel. Dis. */
#define	PHY_M_FC_AN_REG_ACC	BIT(14)	/* Fiber/Copper AN Reg. Access */
#define	PHY_M_FC_RESOLUTION	BIT(13)	/* Fiber/Copper Resolution */
#define	PHY_M_SER_IF_AN_BP	BIT(12)	/* Ser. IF AN Bypass Enable */
#define	PHY_M_SER_IF_BP_ST	BIT(11)	/* Ser. IF AN Bypass Status */
#define	PHY_M_IRQ_POLARITY	BIT(10)	/* IRQ polarity */
#define	PHY_M_DIS_AUT_MED	BIT(9)	/* Disable Aut. Medium Reg. Selection */
					/* (88E1111 only) */
#define	PHY_M_UNDOC1		BIT(7)	/* undocumented bit !! */
#define	PHY_M_DTE_POW_STAT	BIT(4)	/* DTE Power Status (88E1111 only) */
#define	PHY_M_MODE_MASK		0xf	/* Bit	3.. 0: cpy HWCFG MODE[3:0] */

/*	PHY_MARV_CABLE_DIAG	16 bit r/o	Cable Diagnostic Reg */
#define	PHY_M_CABD_ENA_TEST	BIT(15)	/* Enable Test (Page 0) */
#define	PHY_M_CABD_DIS_WAIT	BIT(15)	/* Disable Waiting Period (Page 1) */
					/* (88E1111 only) */
#define	PHY_M_CABD_STAT_MSK	(3<<13)		/* Bit 14..13: Status Mask */
#define	PHY_M_CABD_AMPL_MSK	(0x1f<<8)	/* Bit 12.. 8: Amplitude Mask */
						/* (88E1111 only) */
#define	PHY_M_CABD_DIST_MSK	0xff		/* Bit	7.. 0: Distance Mask */

/* values for Cable Diagnostic Status (11=fail; 00=OK; 10=open; 01=short) */
#define	CABD_STAT_NORMAL	0
#define	CABD_STAT_SHORT		1
#define	CABD_STAT_OPEN		2
#define	CABD_STAT_FAIL		3

/* for 10/100 Fast Ethernet PHY (88E3082 only) */
/*	PHY_MARV_FE_LED_PAR	16 bit r/w	LED Parallel Select Reg. */
#define	PHY_M_FELP_LED2_MSK	(0xf<<8)	/* Bit 11.. 8:LED2 Msk (LNK) */
#define	PHY_M_FELP_LED1_MSK	(0xf<<4)	/* Bit7.. 4: LED1 Msk (ACT) */
#define	PHY_M_FELP_LED0_MSK	0xf		/* Bit3.. 0: LED0 Msk (SPD) */

#define	PHY_M_FELP_LED2_CTRL(x)	((x << 8) & PHY_M_FELP_LED2_MSK)
#define	PHY_M_FELP_LED1_CTRL(x)	((x << 4) & PHY_M_FELP_LED1_MSK)
#define	PHY_M_FELP_LED0_CTRL(x)	((x) & PHY_M_FELP_LED0_MSK)

#define	LED_PAR_CTRL_COLX	0x00
#define	LED_PAR_CTRL_ERROR	0x01
#define	LED_PAR_CTRL_DUPLEX	0x02
#define	LED_PAR_CTRL_DP_COL	0x03
#define	LED_PAR_CTRL_SPEED	0x04
#define	LED_PAR_CTRL_LINK	0x05
#define	LED_PAR_CTRL_TX		0x06
#define	LED_PAR_CTRL_RX		0x07
#define	LED_PAR_CTRL_ACT	0x08
#define	LED_PAR_CTRL_LNK_RX	0x09
#define	LED_PAR_CTRL_LNK_AC	0x0a
#define	LED_PAR_CTRL_ACT_BL	0x0b
#define	LED_PAR_CTRL_TX_BL	0x0c
#define	LED_PAR_CTRL_RX_BL	0x0d
#define	LED_PAR_CTRL_COL_BL	0x0e
#define	LED_PAR_CTRL_INACT	0x0f

/*	PHY_MARV_FE_SPEC_2	16 bit r/w Specific Control Reg. 2 */
#define	PHY_M_FESC_DIS_WAIT	BIT(2)	/* Disable TDR Waiting Period */
#define	PHY_M_FESC_ENA_MCLK	BIT(1)	/* Enable MAC Rx Clock in sleep mode */
#define	PHY_M_FESC_SEL_CL_A	BIT(0)	/* Select Class A driver (100B-TX) */

/* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */
/*	PHY_MARV_PHY_CTRL (page 1)	16 bit r/w Fiber Specific Ctrl */
#define	PHY_M_FIB_FORCE_LNK	BIT(10)	/* Force Link Good */
#define	PHY_M_FIB_SIGD_POL	BIT(9)	/* SIGDET Polarity */
#define	PHY_M_FIB_TX_DIS	BIT(3)	/* Transmitter Disable */

/*	PHY_MARV_PHY_CTRL (page 2)	16 bit r/w MAC Specific Ctrl */
#define	PHY_M_MAC_MD_MSK	(7<<7)	/* Bit	9.. 7: Mode Select Mask */
#define	PHY_M_MAC_GMIF_PUP	BIT(3)
#define	PHY_M_MAC_MD_AUTO	3	/* Auto Copper/1000Base-X */
#define	PHY_M_MAC_MD_COPPER	5	/* Copper only */
#define	PHY_M_MAC_MD_1000BX	7	/* 1000Base-X only */
#define	PHY_M_MAC_MODE_SEL(x)	((x << 7) & PHY_M_MAC_MD_MSK)

/*	PHY_MARV_PHY_CTRL (page 3)	16 bit r/w LED Control Reg. */
#define	PHY_M_LEDC_LOS_MSK	(0xf<<12) /* Bit 15..12: LOS LED Ctrl. Mask */
#define	PHY_M_LEDC_INIT_MSK	(0xf<<8) /* Bit 11.. 8: INIT LED Ctrl. Mask */
#define	PHY_M_LEDC_STA1_MSK	(0xf<<4) /* Bit	7.. 4: STAT1 LED Ctrl. Msk */
#define	PHY_M_LEDC_STA0_MSK	0xf	/* Bit	3.. 0: STAT0 LED Ctrl. Mask */

#define	PHY_M_LEDC_LOS_CTRL(x)	((x << 12) & PHY_M_LEDC_LOS_MSK)
#define	PHY_M_LEDC_INIT_CTRL(x)	((x << 8) & PHY_M_LEDC_INIT_MSK)
#define	PHY_M_LEDC_STA1_CTRL(x)	((x << 4) & PHY_M_LEDC_STA1_MSK)
#define	PHY_M_LEDC_STA0_CTRL(x)	((x) & PHY_M_LEDC_STA0_MSK)

/*	PHY_MARV_PHY_STAT (page 3)	16 bit r/w Polarity Control Reg. */
#define	PHY_M_POLC_LS1M_MSK	(0xf<<12) /* Bit 15..12: LOS,STAT1 Mix % Msk */
#define	PHY_M_POLC_IS0M_MSK	(0xf<<8) /* Bit 11.. 8: INIT,STAT0 Mix % Msk */
#define	PHY_M_POLC_LOS_MSK	(0x3<<6) /* Bit	7.. 6: LOS Pol. Ctrl. Msk */
#define	PHY_M_POLC_INIT_MSK	(0x3<<4) /* Bit	5.. 4: INIT Pol. Ctrl. Msk */
#define	PHY_M_POLC_STA1_MSK	(0x3<<2) /* Bit	3.. 2: STAT1 Pol. Ctrl. Msk */
#define	PHY_M_POLC_STA0_MSK	0x3	/* Bit	1.. 0: STAT0 Pol. Ctrl. Msk */

#define	PHY_M_POLC_LS1_P_MIX(x)	((x << 12) & PHY_M_POLC_LS1M_MSK)
#define	PHY_M_POLC_IS0_P_MIX(x)	((x << 8) & PHY_M_POLC_IS0M_MSK)
#define	PHY_M_POLC_LOS_CTRL(x)	((x << 6) & PHY_M_POLC_LOS_MSK)
#define	PHY_M_POLC_INIT_CTRL(x)	((x << 4) & PHY_M_POLC_INIT_MSK)
#define	PHY_M_POLC_STA1_CTRL(x)	((x << 2) & PHY_M_POLC_STA1_MSK)
#define	PHY_M_POLC_STA0_CTRL(x)	((x) & PHY_M_POLC_STA0_MSK)

/*
 * GMAC registers
 *
 * The GMAC registers are 16 or 32 bits wide.
 * The GMACs host processor interface is 16 bits wide,
 * therefore ALL registers will be addressed with 16 bit accesses.
 *
 * Note:	NA reg	= Network Address e.g DA, SA etc.
 */

/* Port Registers */
#define	GM_GP_STAT	0x0000	/* 16 bit r/o	General Purpose Status */
#define	GM_GP_CTRL	0x0004	/* 16 bit r/w	General Purpose Control */
#define	GM_TX_CTRL	0x0008	/* 16 bit r/w	Transmit Control Reg. */
#define	GM_RX_CTRL	0x000c	/* 16 bit r/w	Receive Control Reg. */
#define	GM_TX_FLOW_CTRL	0x0010	/* 16 bit r/w	Transmit Flow-Control */
#define	GM_TX_PARAM	0x0014	/* 16 bit r/w	Transmit Parameter Reg. */
#define	GM_SERIAL_MODE	0x0018	/* 16 bit r/w	Serial Mode Register */

/* Source Address Registers */
#define	GM_SRC_ADDR_1L	0x001c	/* 16 bit r/w	Source Address 1 (low) */
#define	GM_SRC_ADDR_1M	0x0020	/* 16 bit r/w	Source Address 1 (middle) */
#define	GM_SRC_ADDR_1H	0x0024	/* 16 bit r/w	Source Address 1 (high) */
#define	GM_SRC_ADDR_2L	0x0028	/* 16 bit r/w	Source Address 2 (low) */
#define	GM_SRC_ADDR_2M	0x002c	/* 16 bit r/w	Source Address 2 (middle) */
#define	GM_SRC_ADDR_2H	0x0030	/* 16 bit r/w	Source Address 2 (high) */

/* Multicast Address Hash Registers */
#define	GM_MC_ADDR_H1	0x0034	/* 16 bit r/w	Multicast Address Hash 1 */
#define	GM_MC_ADDR_H2	0x0038	/* 16 bit r/w	Multicast Address Hash 2 */
#define	GM_MC_ADDR_H3	0x003c	/* 16 bit r/w	Multicast Address Hash 3 */
#define	GM_MC_ADDR_H4	0x0040	/* 16 bit r/w	Multicast Address Hash 4 */

/* Interrupt Source Registers */
#define	GM_TX_IRQ_SRC	0x0044	/* 16 bit r/o	Tx Overflow IRQ Source */
#define	GM_RX_IRQ_SRC	0x0048	/* 16 bit r/o	Rx Overflow IRQ Source */
#define	GM_TR_IRQ_SRC	0x004c	/* 16 bit r/o	Tx/Rx Over. IRQ Source */

/* Interrupt Mask Registers */
#define	GM_TX_IRQ_MSK	0x0050	/* 16 bit r/w	Tx Overflow IRQ Mask */
#define	GM_RX_IRQ_MSK	0x0054	/* 16 bit r/w	Rx Overflow IRQ Mask */
#define	GM_TR_IRQ_MSK	0x0058	/* 16 bit r/w	Tx/Rx Over. IRQ Mask */

/* Serial Management Interface (SMI) Registers */
#define	GM_SMI_CTRL	0x0080	/* 16 bit r/w	SMI Control Register */
#define	GM_SMI_DATA	0x0084	/* 16 bit r/w	SMI Data Register */
#define	GM_PHY_ADDR	0x0088	/* 16 bit r/w	GPHY Address Register */

/* MIB Counters */
#define	GM_MIB_CNT_BASE	0x0100	/* Base Address of MIB Counters */
#define	GM_MIB_CNT_SIZE	44	/* Number of MIB Counters */

/*
 * MIB Counters base address definitions (low word) -
 * use offset 4 for access to high word	(32 bit r/o)
 */
#define	GM_RXF_UC_OK	(GM_MIB_CNT_BASE + 0)	/* Ucast Frames Received OK */
#define	GM_RXF_BC_OK	(GM_MIB_CNT_BASE + 8)	/* BCast Frames Received OK */
#define	GM_RXF_MPAUSE	(GM_MIB_CNT_BASE + 16)	/* Pause MAC Ctrl Frames Rx'd */
#define	GM_RXF_MC_OK	(GM_MIB_CNT_BASE + 24)	/* MCast Frames Received OK */
#define	GM_RXF_FCS_ERR	(GM_MIB_CNT_BASE + 32)	/* Rx Frame Check Seq. Error */
#define	GM_RXF_SPARE1	(GM_MIB_CNT_BASE + 40)	/* Rx spare 1 */
#define	GM_RXO_OK_LO	(GM_MIB_CNT_BASE + 48)	/* Octets Received OK Lo */
#define	GM_RXO_OK_HI	(GM_MIB_CNT_BASE + 56)	/* Octets Received OK Hi */
#define	GM_RXO_ERR_LO	(GM_MIB_CNT_BASE + 64)	/* Octets Received Inval Lo */
#define	GM_RXO_ERR_HI	(GM_MIB_CNT_BASE + 72)	/* Octets Received Inval Hi */
#define	GM_RXF_SHT	(GM_MIB_CNT_BASE + 80)	/* Frames <64 Byte RX OK */
#define	GM_RXE_FRAG	(GM_MIB_CNT_BASE + 88)	/* Frames <64 Byte RX FCS Err */
#define	GM_RXF_64B	(GM_MIB_CNT_BASE + 96)	/* 64 Byte Rx Frame */
#define	GM_RXF_127B	(GM_MIB_CNT_BASE + 104)	/* 65-127 Byte Rx Frame */
#define	GM_RXF_255B	(GM_MIB_CNT_BASE + 112)	/* 128-255 Byte Rx Frame */
#define	GM_RXF_511B	(GM_MIB_CNT_BASE + 120)	/* 256-511 Byte Rx Frame */
#define	GM_RXF_1023B	(GM_MIB_CNT_BASE + 128)	/* 512-1023 Byte Rx Frame */
#define	GM_RXF_1518B	(GM_MIB_CNT_BASE + 136)	/* 1024-1518 Byte Rx Frame */
#define	GM_RXF_MAX_SZ	(GM_MIB_CNT_BASE + 144)	/* 1519-MaxSize Byte Rx Frame */
#define	GM_RXF_LNG_ERR	(GM_MIB_CNT_BASE + 152)	/* Rx Frame too Long Error */
#define	GM_RXF_JAB_PKT	(GM_MIB_CNT_BASE + 160)	/* Rx Jabber Packet Frame */
#define	GM_RXF_SPARE2	(GM_MIB_CNT_BASE + 168)	/* Rx spare 2 */
#define	GM_RXE_FIFO_OV	(GM_MIB_CNT_BASE + 176)	/* Rx FIFO overflow Event */
#define	GM_RXF_SPARE3	(GM_MIB_CNT_BASE + 184)	/* Rx spare 3 */
#define	GM_TXF_UC_OK	(GM_MIB_CNT_BASE + 192)	/* Unicast Frames TX OK */
#define	GM_TXF_BC_OK	(GM_MIB_CNT_BASE + 200)	/* BCast Frames TX OK */
#define	GM_TXF_MPAUSE	(GM_MIB_CNT_BASE + 208)	/* Pause MAC Ctrl Frames TX */
#define	GM_TXF_MC_OK	(GM_MIB_CNT_BASE + 216)	/* MCast Frames TX OK */
#define	GM_TXO_OK_LO	(GM_MIB_CNT_BASE + 224)	/* Octets TX OK Low */
#define	GM_TXO_OK_HI	(GM_MIB_CNT_BASE + 232)	/* Octets TX OK High */
#define	GM_TXF_64B	(GM_MIB_CNT_BASE + 240)	/* 64 Byte Tx Frame */
#define	GM_TXF_127B	(GM_MIB_CNT_BASE + 248)	/* 65-127 Byte Tx Frame */
#define	GM_TXF_255B	(GM_MIB_CNT_BASE + 256)	/* 128-255 Byte Tx Frame */
#define	GM_TXF_511B	(GM_MIB_CNT_BASE + 264)	/* 256-511 Byte Tx Frame */
#define	GM_TXF_1023B	(GM_MIB_CNT_BASE + 272)	/* 512-1023 Byte Tx Frame */
#define	GM_TXF_1518B	(GM_MIB_CNT_BASE + 280)	/* 1024-1518 Byte Tx Frame */
#define	GM_TXF_MAX_SZ	(GM_MIB_CNT_BASE + 288)	/* 1519-MaxSize Byte Tx Frame */
#define	GM_TXF_SPARE1	(GM_MIB_CNT_BASE + 296)	/* Tx spare 1 */
#define	GM_TXF_COL	(GM_MIB_CNT_BASE + 304)	/* Tx Collision */
#define	GM_TXF_LAT_COL	(GM_MIB_CNT_BASE + 312)	/* Tx Late Collision */
#define	GM_TXF_ABO_COL	(GM_MIB_CNT_BASE + 320)	/* Tx Excessive Col */
#define	GM_TXF_MUL_COL	(GM_MIB_CNT_BASE + 328)	/* Tx Multiple Collision */
#define	GM_TXF_SNG_COL	(GM_MIB_CNT_BASE + 336)	/* Tx Single Collision */
#define	GM_TXE_FIFO_UR	(GM_MIB_CNT_BASE + 344)	/* Tx FIFO Underrun Event */

/*
 * GMAC Bit Definitions
 *
 * If the bit access behaviour differs from the register access behaviour
 * (r/w, r/o) this is documented after the bit number.
 * The following bit access behaviours are used:
 *	(sc)	self clearing
 *	(r/o)	read only
 */

/*	GM_GP_STAT	16 bit r/o	General Purpose Status Register */
#define	GM_GPSR_SPEED		BIT(15)	/* Port Speed (1 = 100 Mbps) */
#define	GM_GPSR_DUPLEX		BIT(14)	/* Duplex Mode (1 = Full) */
#define	GM_GPSR_FC_TX_DIS	BIT(13)	/* Tx Flow-Control Mode Disabled */
#define	GM_GPSR_LINK_UP		BIT(12)	/* Link Up Status */
#define	GM_GPSR_PAUSE		BIT(11)	/* Pause State */
#define	GM_GPSR_TX_ACTIVE	BIT(10)	/* Tx in Progress */
#define	GM_GPSR_EXC_COL		BIT(9)	/* Excessive Collisions Occured */
#define	GM_GPSR_LAT_COL		BIT(8)	/* Late Collisions Occured */
#define	GM_GPSR_PHY_ST_CH	BIT(5)	/* PHY Status Change */
#define	GM_GPSR_GIG_SPEED	BIT(4)	/* Gigabit Speed (1 = 1000 Mbps) */
#define	GM_GPSR_PART_MODE	BIT(3)	/* Partition mode */
#define	GM_GPSR_FC_RX_DIS	BIT(2)	/* Rx Flow-Control Mode Disabled */

/*	GM_GP_CTRL	16 bit r/w	General Purpose Control Register */
#define	GM_GPCR_RMII_PH_ENA	BIT(15)	/* Enbl RMII for PHY (Yukon-FE only) */
#define	GM_GPCR_RMII_LB_ENA	BIT(14)	/* Enable RMII Lpbck (Yukon-FE only) */
#define	GM_GPCR_FC_TX_DIS	BIT(13)	/* Disable Tx Flow-Control Mode */
#define	GM_GPCR_TX_ENA		BIT(12)	/* Enable Transmit */
#define	GM_GPCR_RX_ENA		BIT(11)	/* Enable Receive */
#define	GM_GPCR_LOOP_ENA	BIT(9)	/* Enable MAC Loopback Mode */
#define	GM_GPCR_PART_ENA	BIT(8)	/* Enable Partition Mode */
#define	GM_GPCR_GIGS_ENA	BIT(7)	/* Gigabit Speed (1000 Mbps) */
#define	GM_GPCR_FL_PASS		BIT(6)	/* Force Link Pass */
#define	GM_GPCR_DUP_FULL	BIT(5)	/* Full Duplex Mode */
#define	GM_GPCR_FC_RX_DIS	BIT(4)	/* Disable Rx Flow-Control Mode */
#define	GM_GPCR_SPEED_100	BIT(3)	/* Port Speed 100 Mbps */
#define	GM_GPCR_AU_DUP_DIS	BIT(2)	/* Disable Auto-Update Duplex */
#define	GM_GPCR_AU_FCT_DIS	BIT(1)	/* Disable Auto-Update Flow-C. */
#define	GM_GPCR_AU_SPD_DIS	BIT(0)	/* Disable Auto-Update Speed */

#define	GM_GPCR_SPEED_1000	(GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100)
#define	GM_GPCR_AU_ALL_DIS	(GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS |\
    GM_GPCR_AU_SPD_DIS)

/*	GM_TX_CTRL	16 bit r/w	Transmit Control Register */
#define	GM_TXCR_FORCE_JAM	BIT(15)	/* Force Jam / Flow-Control */
#define	GM_TXCR_CRC_DIS		BIT(14)	/* Disable insertion of CRC */
#define	GM_TXCR_PAD_DIS		BIT(13)	/* Disable padding of packets */
#define	GM_TXCR_COL_THR_MSK	(7<<10)	/* Bit 12..10: Collisn Threshld Msk */
#define	GM_TXCR_PAD_PAT_MSK	0xff	/* Bit	7.. 0: Padding Pattern Mask */
					/* (Yukon-2 only) */

#define	TX_COL_THR(x)		((x << 10) & GM_TXCR_COL_THR_MSK)
#define	TX_COL_DEF		0x04

/*	GM_RX_CTRL	16 bit r/w	Receive Control Register */
#define	GM_RXCR_UCF_ENA		BIT(15)	/* Enable Unicast filtering */
#define	GM_RXCR_MCF_ENA		BIT(14)	/* Enable Multicast filtering */
#define	GM_RXCR_CRC_DIS		BIT(13)	/* Remove 4-byte CRC */
#define	GM_RXCR_PASS_FC		BIT(12)	/* Pass FC pckts FIFO (Yukon-1 only) */

/*	GM_TX_PARAM	16 bit r/w	Transmit Parameter Register */
#define	GM_TXPA_JAMLEN_MSK	(3<<14)	/* Bit 15..14: Jam Lngth Msk */
#define	GM_TXPA_JAMIPG_MSK	(0x1f<<9) /* Bit 13.. 9: Jam IPG Mask */
#define	GM_TXPA_JAMDAT_MSK	(0x1f<<4) /* Bit 8.. 4: IPG Jam Data Msk */
#define	GM_TXPA_BO_LIM_MSK	0x0f	/* Bit	3.. 0: Backoff Limit Mask */
						/* (Yukon-2 only) */

#define	TX_JAM_LEN_VAL(x)	((x << 14) & GM_TXPA_JAMLEN_MSK)
#define	TX_JAM_IPG_VAL(x)	((x << 9) & GM_TXPA_JAMIPG_MSK)
#define	TX_IPG_JAM_DATA(x)	((x << 4) & GM_TXPA_JAMDAT_MSK)
#define	TX_BACK_OFF_LIM(x)	((x) & GM_TXPA_BO_LIM_MSK)

#define	TX_JAM_LEN_DEF		0x03
#define	TX_JAM_IPG_DEF		0x0b
#define	TX_IPG_JAM_DEF		0x1c
#define	TX_BOF_LIM_DEF		0x04

/*	GM_SERIAL_MODE	16 bit r/w	Serial Mode Register */
#define	GM_SMOD_DATABL_MSK	(0x1f<<11) /* Bit 15..11:	Data Blinder */
	/* r/o on Yukon, r/w on Yukon-EC */
#define	GM_SMOD_LIMIT_4		BIT(10)	/* 4 consecutive Tx trials */
#define	GM_SMOD_VLAN_ENA	BIT(9)	/* Enable VLAN	(Max. Frame Len) */
#define	GM_SMOD_JUMBO_ENA	BIT(8)	/* Enable Jumbo (Max. Frame Len) */
#define	GM_NEW_FLOW_CTRL	BIT(6)  /* Enable New Flow-Control */
#define	GM_SMOD_IPG_MSK		0x1f	/* Bit	4.. 0:	Intr-Pckt Gap (IPG) */

#define	DATA_BLIND_VAL(x)	((x << 11) & GM_SMOD_DATABL_MSK)
#define	IPG_DATA_VAL(x)		((x) & GM_SMOD_IPG_MSK)

#define	DATA_BLIND_DEF		0x04
#define	IPG_DATA_DEF		0x1e

/*	GM_SMI_CTRL	16 bit r/w	SMI Control Register */
#define	GM_SMI_CT_PHY_A_MSK	(0x1f<<11) /* Bit 15..11: PHY Device Addr */
#define	GM_SMI_CT_REG_A_MSK	(0x1f<<6) /* Bit 10.. 6: PHY Register Addr */
#define	GM_SMI_CT_OP_RD		BIT(5)	/* OpCode Read (0=Write) */
#define	GM_SMI_CT_RD_VAL	BIT(4)	/* Read Valid (Read completed) */
#define	GM_SMI_CT_BUSY		BIT(3)	/* Busy (Operation in progress) */

#define	GM_SMI_CT_PHY_AD(x)	((x << 11) & GM_SMI_CT_PHY_A_MSK)
#define	GM_SMI_CT_REG_AD(x)	((x << 6) & GM_SMI_CT_REG_A_MSK)

/*	GM_PHY_ADDR	16 bit r/w	GPHY Address Register */
#define	GM_PAR_MIB_CLR		BIT(5)	/* Set MIB Clear Counter Mode */
#define	GM_PAR_MIB_TST		BIT(4)	/* MIB Load Counter (Test Mode) */

/* Receive Frame Status Encoding */
#define	GMR_FS_LEN_MSK	(0xffff<<16)	/* Bit 31..16:	Rx Frame Length */
#define	GMR_FS_VLAN		BIT(13)	/* VLAN Packet */
#define	GMR_FS_JABBER		BIT(12)	/* Jabber Packet */
#define	GMR_FS_UN_SIZE		BIT(11)	/* Undersize Packet */
#define	GMR_FS_MC		BIT(10)	/* Multicast Packet */
#define	GMR_FS_BC		BIT(9)	/* Broadcast Packet */
#define	GMR_FS_RX_OK		BIT(8)	/* Receive OK (Good Packet) */
#define	GMR_FS_GOOD_FC		BIT(7)	/* Good Flow-Control Packet */
#define	GMR_FS_BAD_FC		BIT(6)	/* Bad	Flow-Control Packet */
#define	GMR_FS_MII_ERR		BIT(5)	/* MII Error */
#define	GMR_FS_LONG_ERR		BIT(4)	/* Too Long Packet */
#define	GMR_FS_FRAGMENT		BIT(3)	/* Fragment */
#define	GMR_FS_CRC_ERR		BIT(1)	/* CRC Error */
#define	GMR_FS_RX_FF_OV		BIT(0)	/* Rx FIFO Overflow */

#define	GMR_FS_LEN_SHIFT	16

#define	GMR_FS_ANY_ERR		( \
			GMR_FS_RX_FF_OV | \
			GMR_FS_CRC_ERR | \
			GMR_FS_FRAGMENT | \
			GMR_FS_LONG_ERR | \
			GMR_FS_MII_ERR | \
			GMR_FS_BAD_FC | \
			GMR_FS_GOOD_FC | \
			GMR_FS_UN_SIZE | \
			GMR_FS_JABBER)

/* Rx GMAC FIFO Flush Mask (default) */
#define	RX_FF_FL_DEF_MSK	GMR_FS_ANY_ERR

/*	Receive and Transmit GMAC FIFO Registers (YUKON only) */

/*	RX_GMF_EA	32 bit	Rx GMAC FIFO End Address */
/*	RX_GMF_AF_THR	32 bit	Rx GMAC FIFO Almost Full Thresh. */
/*	RX_GMF_WP	32 bit	Rx GMAC FIFO Write Pointer */
/*	RX_GMF_WLEV	32 bit	Rx GMAC FIFO Write Level */
/*	RX_GMF_RP	32 bit	Rx GMAC FIFO Read Pointer */
/*	RX_GMF_RLEV	32 bit	Rx GMAC FIFO Read Level */
/*	TX_GMF_EA	32 bit	Tx GMAC FIFO End Address */
/*	TX_GMF_AE_THR	32 bit	Tx GMAC FIFO Almost Empty Thresh. */
/*	TX_GMF_WP	32 bit	Tx GMAC FIFO Write Pointer */
/*	TX_GMF_WSP	32 bit	Tx GMAC FIFO Write Shadow Pointer */
/*	TX_GMF_WLEV	32 bit	Tx GMAC FIFO Write Level */
/*	TX_GMF_RP	32 bit	Tx GMAC FIFO Read Pointer */
/*	TX_GMF_RSTP	32 bit	Tx GMAC FIFO Restart Pointer */
/*	TX_GMF_RLEV	32 bit	Tx GMAC FIFO Read Level */

/*	RX_GMF_CTRL_T	32 bit	Rx GMAC FIFO Control/Test */
#define	RX_TRUNC_ON		BIT(27)	 /* enable  packet truncation */
#define	RX_TRUNC_OFF		BIT(26)	/* disable packet truncation */
#define	RX_VLAN_STRIP_ON	BIT(25)	/* enable  VLAN stripping */
#define	RX_VLAN_STRIP_OFF	BIT(24)	/* disable VLAN stripping */
#define	GMF_RX_OVER_ON		BIT(19)	/* flushing on receive overrun */
#define	GMF_RX_OVER_OFF		BIT(18)	/* flushing on receive overrun */
#define	GMF_WP_TST_ON		BIT(14)	/* Write Pointer Test On */
#define	GMF_WP_TST_OFF		BIT(13)	/* Write Pointer Test Off */
#define	GMF_WP_STEP		BIT(12)	/* Write Pointer Step/Increment */
#define	GMF_RP_TST_ON		BIT(10)	/* Read Pointer Test On */
#define	GMF_RP_TST_OFF		BIT(9)	/* Read Pointer Test Off */
#define	GMF_RP_STEP		BIT(8)	/* Read Pointer Step/Increment */
#define	GMF_RX_F_FL_ON		BIT(7)	/* Rx FIFO Flush Mode On */
#define	GMF_RX_F_FL_OFF		BIT(6)	/* Rx FIFO Flush Mode Off */
#define	GMF_CLI_RX_FO		BIT(5)	/* Clear IRQ Rx FIFO Overrun */
#define	GMF_CLI_RX_FC		BIT(4)	/* Clear IRQ Rx Frame Complete */
#define	GMF_OPER_ON		BIT(3)	/* Operational Mode On */
#define	GMF_OPER_OFF		BIT(2)	/* Operational Mode Off */
#define	GMF_RST_CLR		BIT(1)	/* Clear GMAC FIFO Reset */
#define	GMF_RST_SET		BIT(0)	/* Set	 GMAC FIFO Reset */

/*	TX_GMF_CTRL_T	32 bit	Tx GMAC FIFO Control/Test (YUKON and Yukon-2) */
#define	TX_STFW_DIS	BIT(31)	/* Disable Store & Forward (Yukon-EC Ultra) */
#define	TX_STFW_ENA	BIT(30)	/* Enable Store & Forward (Yukon-EC Ultra) */
#define	TX_VLAN_TAG_ON	BIT(25)	/* enable  VLAN tagging */
#define	TX_VLAN_TAG_OFF	BIT(24)	/* disable VLAN tagging */
#define	TX_JUMBO_ENA	BIT(23)	/* Enable Jumbo Mode (Yukon-EC Ultra) */
#define	TX_JUMBO_DIS	BIT(22)	/* Disable Jumbo Mode (Yukon-EC Ultra) */
#define	GMF_WSP_TST_ON	BIT(18)	/* Write Shadow Pointer Test On */
#define	GMF_WSP_TST_OFF	BIT(17)	/* Write Shadow Pointer Test Off */
#define	GMF_WSP_STEP	BIT(16)	/* Write Shadow Pointer Step/Increment */
				/* Bits 15..8: same as for RX_GMF_CTRL_T */
#define	GMF_CLI_TX_FU	BIT(6)	/* Clear IRQ Tx FIFO Underrun */
#define	GMF_CLI_TX_FC	BIT(5)	/* Clear IRQ Tx Frame Complete */
#define	GMF_CLI_TX_PE	BIT(4)	/* Clear IRQ Tx Parity Error */
				/* Bits 3..0: same as for RX_GMF_CTRL_T */

#define	GMF_RX_CTRL_DEF		(GMF_OPER_ON | GMF_RX_F_FL_ON)
#define	GMF_TX_CTRL_DEF		GMF_OPER_ON

#define	RX_GMF_AF_THR_MIN	0x0c /* Rx GMAC FIFO Almst Full Thrsh. min. */
#define	RX_GMF_FL_THR_DEF	0x0a /* Rx GMAC FIFO Flush Threshold default */

/*	GMAC_TI_ST_CTRL	 8 bit	Time Stamp Timer Ctrl Reg (YUKON only) */
#define	GMT_ST_START	BIT(2)	/* Start Time Stamp Timer */
#define	GMT_ST_STOP	BIT(1)	/* Stop	 Time Stamp Timer */
#define	GMT_ST_CLR_IRQ	BIT(0)	/* Clear Time Stamp Timer IRQ */

/*	POLL_CTRL	32 bit	Polling Unit control register (Yukon-2 only) */
#define	PC_CLR_IRQ_CHK	BIT(5)	/* Clear IRQ Check */
#define	PC_POLL_RQ	BIT(4)	/* Poll Request Start */
#define	PC_POLL_OP_ON	BIT(3)	/* Operational Mode On */
#define	PC_POLL_OP_OFF	BIT(2)	/* Operational Mode Off */
#define	PC_POLL_RST_CLR	BIT(1)	/* Clear Polling Unit Reset (Enable) */
#define	PC_POLL_RST_SET	BIT(0)	/* Set	 Polling Unit Reset */

/* B28_Y2_ASF_STAT_CMD		32 bit	ASF Status and Command Reg */
/* This register is used by the host driver software */
#define	Y2_ASF_AHB_RST	BIT(9)	/* AHB bridge reset */
#define	Y2_ASF_CPU_MODE	BIT(8)	/* ASF CPU reset mode */
#define	Y2_ASF_OS_PRES	BIT(4)	/* ASF operation system present */
#define	Y2_ASF_RESET	BIT(3)	/* ASF system in reset state */
#define	Y2_ASF_RUNNING	BIT(2)	/* ASF system operational */
#define	Y2_ASF_CLR_HSTI	BIT(1)	/* Clear ASF IRQ */
#define	Y2_ASF_IRQ	BIT(0)	/* Issue an IRQ to ASF system */

#define	Y2_ASF_STAT_MSK	3
#define	Y2_ASF_UC_STATE	(3<<2)	/* ASF uC State */
#define	Y2_ASF_CLK_HALT	0	/* ASF system clock stopped */

/* B28_Y2_ASF_HOST_COM	32 bit	ASF Host Communication Reg */
/* This register is used by the ASF firmware */
#define	Y2_ASF_CLR_ASFI	BIT(1)	/* Clear host IRQ */
#define	Y2_ASF_HOST_IRQ	BIT(0)	/* Issue an IRQ to HOST system */

/*	STAT_CTRL	32 bit	Status BMU control register (Yukon-2 only) */
#define	SC_STAT_CLR_IRQ	BIT(4)	/* Status Burst IRQ clear */
#define	SC_STAT_OP_ON	BIT(3)	/* Operational Mode On */
#define	SC_STAT_OP_OFF	BIT(2)	/* Operational Mode Off */
#define	SC_STAT_RST_CLR	BIT(1)	/* Clear Status Unit Reset (Enable) */
#define	SC_STAT_RST_SET	BIT(0)	/* Set	 Status Unit Reset */

/*	GMAC_CTRL	32 bit	GMAC Control Reg (YUKON only) */
#define	GMC_SET_RST	BIT(15)	/* MAC SEC RST */
#define	GMC_SEC_RST_OFF	BIT(14)	/* MAC SEC RST OFF */
#define	GMC_BYP_MACSECRX_ON BIT(13) /* Bypass macsec RX */
#define	GMC_BYP_MACSECRX_OFF BIT(12) /* Bypass macsec RX off */
#define	GMC_BYP_MACSECTX_ON BIT(11) /* Bypass macsec TX */
#define	GMC_BYP_MACSECTX_OFF BIT(10) /* Bypass macsec TX  off */
#define	GMC_BYP_RETR_ON	BIT(9)	/* Bypass retransmit FIFO On */
#define	GMC_BYP_RETR_OFF BIT(8) /* Bypass retransmit FIFO Off */
#define	GMC_H_BURST_ON	BIT(7)	/* Half Duplex Burst Mode On */
#define	GMC_H_BURST_OFF	BIT(6)	/* Half Duplex Burst Mode Off */
#define	GMC_F_LOOPB_ON	BIT(5)	/* FIFO Loopback On */
#define	GMC_F_LOOPB_OFF	BIT(4)	/* FIFO Loopback Off */
#define	GMC_PAUSE_ON	BIT(3)	/* Pause On */
#define	GMC_PAUSE_OFF	BIT(2)	/* Pause Off */
#define	GMC_RST_CLR	BIT(1)	/* Clear GMAC Reset */
#define	GMC_RST_SET	BIT(0)	/* Set	 GMAC Reset */

/*	GPHY_CTRL	32 bit	GPHY Control Reg (YUKON only) */
#define	GPC_SEL_BDT	BIT(28)	/* Select Bi-Dir. Transfer for MDC/MDIO */
#define	GPC_INT_POL	BIT(27)	/* IRQ Polarity is Active Low */
#define	GPC_75_OHM	BIT(26)	/* Use 75 Ohm Termination instead of 50 */
#define	GPC_DIS_FC	BIT(25)	/* Disable Automatic Fiber/Copper Detection */
#define	GPC_DIS_SLEEP	BIT(24)	/* Disable Energy Detect */
#define	GPC_HWCFG_M_3	BIT(23)	/* HWCFG_MODE[3] */
#define	GPC_HWCFG_M_2	BIT(22)	/* HWCFG_MODE[2] */
#define	GPC_HWCFG_M_1	BIT(21)	/* HWCFG_MODE[1] */
#define	GPC_HWCFG_M_0	BIT(20)	/* HWCFG_MODE[0] */
#define	GPC_ANEG_0	BIT(19)	/* ANEG[0] */
#define	GPC_ENA_XC	BIT(18)	/* Enable MDI crossover */
#define	GPC_DIS_125	BIT(17)	/* Disable 125 MHz clock */
#define	GPC_ANEG_3	BIT(16)	/* ANEG[3] */
#define	GPC_ANEG_2	BIT(15)	/* ANEG[2] */
#define	GPC_ANEG_1	BIT(14)	/* ANEG[1] */
#define	GPC_ENA_PAUSE	BIT(13)	/* Enable Pause (SYM_OR_REM) */
#define	GPC_PHYADDR_4	BIT(12)	/* Bit 4 of Phy Addr */
#define	GPC_PHYADDR_3	BIT(11)	/* Bit 3 of Phy Addr */
#define	GPC_PHYADDR_2	BIT(10)	/* Bit 2 of Phy Addr */
#define	GPC_PHYADDR_1	BIT(9)	/* Bit 1 of Phy Addr */
#define	GPC_PHYADDR_0	BIT(8)	/* Bit 0 of Phy Addr */
#define	GPC_RST_CLR	BIT(1)	/* Clear GPHY Reset */
#define	GPC_RST_SET	BIT(0)	/* Set	 GPHY Reset */

/*	GMAC_IRQ_SRC	 8 bit	GMAC Interrupt Source Reg (YUKON only) */
/*	GMAC_IRQ_MSK	 8 bit	GMAC Interrupt Mask   Reg (YUKON only) */
#define	GM_IS_RX_CO_OV	BIT(5)	/* Receive Counter Overflow IRQ */
#define	GM_IS_TX_CO_OV	BIT(4)	/* Transmit Counter Overflow IRQ */
#define	GM_IS_TX_FF_UR	BIT(3)	/* Transmit FIFO Underrun */
#define	GM_IS_TX_COMPL	BIT(2)	/* Frame Transmission Complete */
#define	GM_IS_RX_FF_OR	BIT(1)	/* Receive FIFO Overrun */
#define	GM_IS_RX_COMPL	BIT(0)	/* Frame Reception Complete */

#define	GMAC_DEF_MSK	(GM_IS_RX_CO_OV | GM_IS_TX_CO_OV | GM_IS_TX_FF_UR)

/*	GMAC_LINK_CTRL	16 bit	GMAC Link Control Reg (YUKON only) */
#define	GMLC_RST_CLR	BIT(1)	/* Clear GMAC Link Reset */
#define	GMLC_RST_SET	BIT(0)	/* Set	 GMAC Link Reset */

#define	YGE_PORT_A	0
#define	YGE_PORT_B	1

/* Register access macros */
#define	CSR_WRITE_4(d, reg, v)	\
	ddi_put32(d->d_regsh, (uint32_t *)(void *)(d->d_regs + (reg)), (v))
#define	CSR_WRITE_2(d, reg, v)	\
	ddi_put16(d->d_regsh, (uint16_t *)(void *)(d->d_regs + (reg)), (v))
#define	CSR_WRITE_1(d, reg, v)	\
	ddi_put8(d->d_regsh, (uint8_t *)(void *)(d->d_regs + (reg)), (v))

#define	CSR_READ_4(d, reg)		\
	ddi_get32(d->d_regsh, (uint32_t *)(void *)(d->d_regs + (reg)))
#define	CSR_READ_2(d, reg)		\
	ddi_get16(d->d_regsh, (uint16_t *)(void *)(d->d_regs + (reg)))
#define	CSR_READ_1(d, reg)		\
	ddi_get8(d->d_regsh, (uint8_t *)(void *)(d->d_regs + (reg)))

#define	CSR_PCI_WRITE_4(d, reg, v)	CSR_WRITE_4(d, Y2_CFG_SPC + (reg), (v))
#define	CSR_PCI_WRITE_2(d, reg, v)	CSR_WRITE_2(d, Y2_CFG_SPC + (reg), (v))
#define	CSR_PCI_WRITE_1(d, reg, v)	CSR_WRITE_1(d, Y2_CFG_SPC + (reg), (v))

#define	CSR_PCI_READ_4(d, reg)		CSR_READ_4(d, Y2_CFG_SPC + (reg))
#define	CSR_PCI_READ_2(d, reg)		CSR_READ_2(d, Y2_CFG_SPC + (reg))
#define	CSR_PCI_READ_1(d, reg)		CSR_READ_1(d, Y2_CFG_SPC + (reg))

#define	GMAC_REG(port, reg)			\
	((BASE_GMAC_1 + (port) * (BASE_GMAC_2 - BASE_GMAC_1)) | (reg))
#define	GMAC_WRITE_2(sc, port, reg, val)	\
	CSR_WRITE_2((sc), GMAC_REG((port), (reg)), (val))
#define	GMAC_READ_2(sc, port, reg)		\
	CSR_READ_2((sc), GMAC_REG((port), (reg)))
#define	GMAC_READ_4(sc, port, reg)		\
	CSR_READ_4((sc), GMAC_REG((port), (reg)))

/* Descriptor access. */
/*
 * NB: Status & Address fields are the same.
 */
#define	GETADDR(ring, i)						\
	(ddi_get32((ring)->r_acch, &(ring)->r_kaddr[i].desc_status))

#define	GETSTAT(ring, i)						\
	(ddi_get32((ring)->r_acch, &(ring)->r_kaddr[i].desc_status))

#define	GETCTRL(ring, i)						\
	(ddi_get32((ring)->r_acch, &(ring)->r_kaddr[i].desc_control))

#define	PUTADDR(ring, i, v)						\
	(ddi_put32((ring)->r_acch, &(ring)->r_kaddr[i].desc_status, v))

#define	PUTSTAT(ring, i, v)						\
	(ddi_put32((ring)->r_acch, &(ring)->r_kaddr[i].desc_status, v))

#define	PUTCTRL(ring, i, v)						\
	(ddi_put32((ring)->r_acch, &(ring)->r_kaddr[i].desc_control, v))

#define	SYNCENTRY(ring, i, flags)					\
	(void) ddi_dma_sync((ring)->r_dmah, (i) * sizeof (yge_desc_t),	\
	    sizeof (yge_desc_t), (flags))

#define	CLEARRING(ring)				\
	bzero((ring)->r_kaddr, (ring)->r_size)

#define	SYNCRING(ring, flags)				\
	(void) ddi_dma_sync((ring)->r_dmah, 0, 0, (flags))

#define	SYNCBUF(b, flags)				\
	(void) ddi_dma_sync(b->b_dmah, 0, 0, flags)


/* GPHY address (bits 15..11 of SMI control reg) */
#define	PHY_ADDR_MARV	0

#define	YGE_ADDR_LO(x)	((uint64_t)(x) & 0xffffffffUL)
#define	YGE_ADDR_HI(x)	((uint64_t)(x) >> 32)

/*
 * At first I guessed 8 bytes, the size of a single descriptor, would be
 * required alignment constraints. But, it seems that Yukon II have 4096
 * bytes boundary alignment constraints.
 */
#define	MSK_RING_ALIGN	4096
#define	MSK_STAT_ALIGN	4096
#define	YGE_HEADROOM	34	/* Note, must be divisible by 2, but not 4. */

/* Forward decl. */
typedef struct yge_dev yge_dev_t;
typedef struct yge_port yge_port_t;
typedef struct yge_desc yge_desc_t;
typedef struct yge_ring yge_ring_t;
typedef struct yge_buf yge_buf_t;

/* descriptor data structure */
struct yge_desc {
	uint32_t	desc_status;	/* Also address */
	uint32_t	desc_control;
};

struct yge_ring {
	ddi_dma_handle_t	r_dmah;
	ddi_acc_handle_t	r_acch;
	uint64_t		r_paddr;
	size_t			r_size;
	yge_desc_t		*r_kaddr;
	int			r_num;
};


/* mask and shift value to get Tx async queue status for port 1 */
#define	STLE_TXA1_MSKL		0x00000fff
#define	STLE_TXA1_SHIFTL	0

/* mask and shift value to get Tx sync queue status for port 1 */
#define	STLE_TXS1_MSKL		0x00fff000
#define	STLE_TXS1_SHIFTL	12

/* mask and shift value to get Tx async queue status for port 2 */
#define	STLE_TXA2_MSKL		0xff000000
#define	STLE_TXA2_SHIFTL	24
#define	STLE_TXA2_MSKH		0x000f
/* this one shifts up */
#define	STLE_TXA2_SHIFTH	8

/* mask and shift value to get Tx sync queue status for port 2 */
#define	STLE_TXS2_MSKL		0x00000000
#define	STLE_TXS2_SHIFTL	0
#define	STLE_TXS2_MSKH		0xfff0
#define	STLE_TXS2_SHIFTH	4

/* YUKON-2 bit values */
#define	HW_OWNER		0x80000000
#define	SW_OWNER		0x00000000

#define	PU_PUTIDX_VALID		0x10000000

/* YUKON-2 Control flags */
#define	UDPTCP		0x00010000
#define	CALSUM		0x00020000
#define	WR_SUM		0x00040000
#define	INIT_SUM	0x00080000
#define	LOCK_SUM	0x00100000
#define	INS_VLAN	0x00200000
#define	FRC_STAT	0x00400000
#define	EOP		0x00800000

#define	TX_LOCKF	0x01000000
#define	BUF_SEND	0x02000000
#define	PACKET_SEND	0x04000000

#define	NO_WARNING	0x40000000
#define	NO_UPDATE	0x80000000

/* YUKON-2 Rx/Tx opcodes defines */
#define	OP_TCPWRITE	0x11000000
#define	OP_TCPSTART	0x12000000
#define	OP_TCPINIT	0x14000000
#define	OP_TCPLCK	0x18000000
#define	OP_TCPCHKSUM	OP_TCPSTART
#define	OP_TCPIS	(OP_TCPINIT | OP_TCPSTART)
#define	OP_TCPLW	(OP_TCPLCK | OP_TCPWRITE)
#define	OP_TCPLSW	(OP_TCPLCK | OP_TCPSTART | OP_TCPWRITE)
#define	OP_TCPLISW	(OP_TCPLCK | OP_TCPINIT | OP_TCPSTART | OP_TCPWRITE)
#define	OP_ADDR64	0x21000000
#define	OP_VLAN		0x22000000
#define	OP_ADDR64VLAN	(OP_ADDR64 | OP_VLAN)
#define	OP_LRGLEN	0x24000000
#define	OP_LRGLENVLAN	(OP_LRGLEN | OP_VLAN)
#define	OP_BUFFER	0x40000000
#define	OP_PACKET	0x41000000
#define	OP_LARGESEND	0x43000000

/* YUKON-2 STATUS opcodes defines */
#define	OP_RXSTAT	0x60000000
#define	OP_RXTIMESTAMP	0x61000000
#define	OP_RXVLAN	0x62000000
#define	OP_RXCHKS	0x64000000
#define	OP_RXCHKSVLAN	(OP_RXCHKS | OP_RXVLAN)
#define	OP_RXTIMEVLAN	(OP_RXTIMESTAMP | OP_RXVLAN)
#define	OP_RSS_HASH	0x65000000
#define	OP_TXINDEXLE	0x68000000

/* YUKON-2 SPECIAL opcodes defines */
#define	OP_PUTIDX	0x70000000

#define	STLE_OP_MASK	0xff000000
#define	STLE_LEN_MASK	0x0000ffff

/* Descriptor Bit Definition */
/*	TxCtrl		Transmit Buffer Control Field */
/*	RxCtrl		Receive	 Buffer Control Field */
#define	BMU_OWN		BIT(31)	/* OWN bit: 0=host/1=BMU */
#define	BMU_STF		BIT(30)	/* Start of Frame */
#define	BMU_EOF		BIT(29)	/* End of Frame */
#define	BMU_IRQ_EOB	BIT(28)	/* Req "End of Buffer" IRQ */
#define	BMU_IRQ_EOF	BIT(27)	/* Req "End of Frame" IRQ */
/* TxCtrl specific bits */
#define	BMU_STFWD	BIT(26)	/* (Tx)	Store & Forward Frame */
#define	BMU_NO_FCS	BIT(25)	/* (Tx) Disable MAC FCS (CRC) generation */
#define	BMU_SW		BIT(24)	/* (Tx)	1 bit res. for SW use */
/* RxCtrl specific bits */
#define	BMU_DEV_0	BIT(26)	/* (Rx)	Transfer data to Dev0 */
#define	BMU_STAT_VAL	BIT(25)	/* (Rx)	Rx Status Valid */
#define	BMU_TIST_VAL	BIT(24)	/* (Rx)	Rx TimeStamp Valid */
				/* Bit 23..16:	BMU Check Opcodes */
#define	BMU_CHECK	(0x55<<16)	/* Default BMU check */
#define	BMU_TCP_CHECK	(0x56<<16)	/* Descr with TCP ext */
#define	BMU_UDP_CHECK	(0x57<<16)	/* Descr with UDP ext (YUKON only) */
#define	BMU_BBC		0xffff	/* Bit 15.. 0:	Buffer Byte Counter */

#define	YGE_TX_RING_CNT		256
#define	YGE_RX_RING_CNT		256
#define	YGE_STAT_RING_CNT	(YGE_TX_RING_CNT + YGE_RX_RING_CNT)

#define	MSK_MAXTXSEGS		32

/*
 * It seems that the hardware requires extra decriptors(LEs) to offload
 * TCP/UDP checksum, VLAN hardware tag inserstion and TSO.
 *
 * 1 descriptor for TCP/UDP checksum offload.
 * 1 descriptor VLAN hardware tag insertion.
 * 1 descriptor for TSO(TCP Segmentation Offload)
 * 1 descriptor for 64bits DMA : Not applicatable due to the use of
 *  BUS_SPACE_MAXADDR_32BIT in parent DMA tag creation.
 */
#define	YGE_RESERVED_TX_DESC_CNT	3

/*
 * Jumbo buffer stuff. Note that we must allocate more jumbo
 * buffers than there are descriptors in the receive ring. This
 * is because we don't know how long it will take for a packet
 * to be released after we hand it off to the upper protocol
 * layers. To be safe, we allocate 1.5 times the number of
 * receive descriptors.
 */
#define	YGE_JUMBO_MTU		9000
#define	YGE_JUMBO_FRAMELEN	YGE_JUMBO_MTU + VLAN_TAGSZ
#define	YGE_MAX_FRAMELEN	ETHERMTU + VLAN_TAGSZ

struct yge_buf {
	ddi_dma_handle_t	b_dmah;
	ddi_acc_handle_t	b_acch;
	caddr_t			b_buf;
	/* Note: We could conceivably change this to support 64-bit */
	uint32_t		b_paddr;
};

#define	YGE_INC(x, y)	((x) = (((x) + 1) % (y)))

typedef enum {
	PCI_BUS, PCIX_BUS, PEX_BUS
} yge_bus_t;

#define	YGE_PROC_DEFAULT	(YGE_RX_RING_CNT / 2)
#define	YGE_PROC_MIN		30
#define	YGE_PROC_MAX		(YGE_RX_RING_CNT - 1)

#define	YGE_TX_TIMEOUT		5
#define	YGE_PUT_WM		10

struct yge_hw_stats {
	/* Rx stats. */
	uint32_t rx_ucast_frames;
	uint32_t rx_bcast_frames;
	uint32_t rx_pause_frames;
	uint32_t rx_mcast_frames;
	uint32_t rx_crc_errs;
	uint32_t rx_spare1;
	uint64_t rx_good_octets;
	uint64_t rx_bad_octets;
	uint32_t rx_runts;
	uint32_t rx_runt_errs;
	uint32_t rx_pkts_64;
	uint32_t rx_pkts_65_127;
	uint32_t rx_pkts_128_255;
	uint32_t rx_pkts_256_511;
	uint32_t rx_pkts_512_1023;
	uint32_t rx_pkts_1024_1518;
	uint32_t rx_pkts_1519_max;
	uint32_t rx_pkts_too_long;
	uint32_t rx_pkts_jabbers;
	uint32_t rx_spare2;
	uint32_t rx_fifo_oflows;
	uint32_t rx_spare3;
	/* Tx stats. */
	uint32_t tx_ucast_frames;
	uint32_t tx_bcast_frames;
	uint32_t tx_pause_frames;
	uint32_t tx_mcast_frames;
	uint64_t tx_octets;
	uint32_t tx_pkts_64;
	uint32_t tx_pkts_65_127;
	uint32_t tx_pkts_128_255;
	uint32_t tx_pkts_256_511;
	uint32_t tx_pkts_512_1023;
	uint32_t tx_pkts_1024_1518;
	uint32_t tx_pkts_1519_max;
	uint32_t tx_spare1;
	uint32_t tx_colls;
	uint32_t tx_late_colls;
	uint32_t tx_excess_colls;
	uint32_t tx_multi_colls;
	uint32_t tx_single_colls;
	uint32_t tx_underflows;

	/* Soft stats. */
	uint64_t rx_nobuf;
};

/* Softc for the Marvell Yukon II controller. */
struct yge_dev {
	dev_info_t		*d_dip;

	const char		*d_product;
	const char		*d_model;

	caddr_t			d_regs;
	ddi_acc_handle_t	d_regsh;
	ddi_acc_handle_t	d_pcih;

	uint8_t			d_hw_id;
	uint8_t			d_hw_rev;
	yge_bus_t		d_bustype;
	uint8_t			d_num_port;
	int			d_ramsize;	/* amount of SRAM on NIC */
	uint32_t		d_pmd;		/* physical media type */
	uint32_t		d_coppertype;
	uint32_t		d_intrmask;
	uint32_t		d_intrhwemask;
	uint32_t		d_pflags;
	boolean_t		d_suspended;
	int			d_clock;
	yge_port_t		*d_port[2];
	int			d_txqsize;
	int			d_rxqsize;
	int			d_txqstart[2];
	int			d_txqend[2];
	int			d_rxqstart[2];
	int			d_rxqend[2];

	yge_ring_t		d_status_ring;
	int			d_process_limit;
	int			d_stat_cons;

	kmutex_t 		d_txlock;
	kmutex_t 		d_rxlock;
	kmutex_t 		d_phylock;

	/* task stuff */
	ddi_taskq_t		*d_task_q;
	kcondvar_t		d_task_cv;
	kmutex_t		d_task_mtx;
	int			d_task_flags;
#define	YGE_TASK_EXIT		0x0001
#define	YGE_TASK_RESTART	0x0002

	ddi_periodic_t		d_periodic;

	/* interrupt stuff */
	ddi_intr_handle_t	*d_intrh;
	int 			d_intrsize;
	uint_t			d_intrpri;
	int			d_intrcap;
	int 			d_intrcnt;
};

typedef int (*phy_writereg_t)(yge_port_t *, int, int, int);
typedef int (*phy_readreg_t)(yge_port_t *, int, int);

/*
 * Locking hierarchy.
 *
 * RX lock protects receive resources, status ring, hardware
 * interrupts, etc.  It is always acquired first.
 *
 * TX lock used to protect transmit exclusive resources.
 *
 * PHY lock used to protect PHY and MII bus stuff.  Leaf lock.
 *
 * DEV lock is synthetic and grabs all locks.  This should be used
 * when changing any state that is shared between receive and transmit,
 * or global values such as the suspended flag.  It should never be
 * held on hot code paths, but is frequently used for extra safety on
 * certain slower paths, such as when changing the receive filters.
 *
 * All of these locks are shaerd between both ports on a multi-port device.
 * However, this shouldn't be much of a problem since such devices are
 * rare.  Furthermore, its not possible to fully seperate the locking
 * because they share low level resources (such as the status ring.)
 *
 * One more note: it is *vital* that entry points into the GLDv3 or
 * mii modules are not called while holding any of these locks.  That
 * can result in deadlock.
 */
#define	RX_LOCK(dev)		mutex_enter(&dev->d_rxlock);
#define	RX_UNLOCK(dev)		mutex_exit(&dev->d_rxlock);
#define	TX_LOCK(dev)		mutex_enter(&dev->d_txlock);
#define	TX_UNLOCK(dev)		mutex_exit(&dev->d_txlock);
#define	PHY_LOCK(dev)		mutex_enter(&dev->d_phylock);
#define	PHY_UNLOCK(dev)		mutex_exit(&dev->d_phylock);

#define	DEV_LOCK(dev)		\
	{ RX_LOCK(dev); TX_LOCK(dev); PHY_LOCK(dev); }
#define	DEV_UNLOCK(dev)		\
	{ PHY_UNLOCK(dev); TX_UNLOCK(dev); RX_UNLOCK(dev); }

/*
 * Task locking.
 *
 * No other locks should be held when this is.
 */
#define	TASK_LOCK(dev)		mutex_enter(&(dev)->d_task_mtx)
#define	TASK_UNLOCK(dev)	mutex_exit(&(dev)->d_task_mtx)
#define	TASK_WAIT(dev)		cv_wait(&(dev)->d_task_cv, &(dev)->d_task_mtx)
#define	TASK_SIGNAL(dev)	cv_signal(&(dev)->d_task_cv)

#define	YGE_USECS(sc, us)	((sc)->d_clock * (us))

/* Softc for each logical interface. */
struct yge_port {
	mac_handle_t		p_mh;
	mii_handle_t		p_mii;
	mac_register_t		*p_mreg;
	yge_dev_t		*p_dev;	/* parent controller */
	int			p_ppa;

	int32_t			p_port;	/* port # on controller */
	uint32_t		p_mtu;
	int			p_framesize;
	uint32_t		p_flags;
#define	PORT_FLAG_RAMBUF	0x0010
#define	PORT_FLAG_NOJUMBO	0x0020
#define	PORT_FLAG_AUTO_TX_SUM	0x0400

	uint32_t		p_txq;	/* Tx. Async Queue offset */
	uint32_t		p_txsq;	/* Tx. Syn Queue offset */
	uint32_t		p_rxq;	/* Rx. Qeueue offset */

	/* transmit stuff */
	yge_ring_t		p_tx_ring;
	int16_t			p_tx_prod;
	int16_t			p_tx_cons;
	int16_t			p_tx_cnt;
	yge_buf_t		*p_tx_buf;
	boolean_t 		p_wantw;
	kmutex_t 		p_txlock;
	int			p_tx_wdog;

	/* receive stuff */
	yge_ring_t		p_rx_ring;
	int16_t			p_rx_cons;
	int16_t			p_rx_prod;
	int			p_rx_putwm;
	yge_buf_t		*p_rx_buf;

	struct yge_hw_stats	p_stats;
	int			p_detach;

	boolean_t		p_running;

	/* receive filter stuff */
	uint8_t			p_curraddr[ETHERADDRL];
	boolean_t		p_promisc;
	uint32_t		p_mchash[2];
	int			p_mccount[64];
};

#define	YGE_TIMEOUT		10000		/* in usec, 10 ms */

/*
 * Chip Feature and Marvell special case support
 */
#define	HW_FEATURE(dev, ReqFeature) \
	(((dev)->d_Features[((ReqFeature) & 0x30000000UL) >> 28] &\
	((ReqFeature) & 0x0fffffffUL)) != 0)

#define	HW_FEAT_LIST		0
#define	HW_DEV_LIST		1
#define	HW_DEV_LIST_2		2

/* DWORD 0: Features */
#define	HWF_ENA_POW_SAV_W_WOL	0x08000000UL /* Power saving with WOL ena. */
#define	HWF_FORCE_AUTO_NEG	0x04000000UL /* Force Auto-Negotiation */
#define	HWF_CLK_GATING_ENABLE	0x02000000UL /* Enable Clock Gating */
#define	HWF_RED_CORE_CLK_SUP	0x01000000UL /* Reduced Core Clock supp. */
#define	HWF_RESTORE_LOST_BARS	0x00800000UL /* Save and restore PCI BARs */
#define	HWF_ASPM_SWITCHING	0x00400000UL /* Activate ASPM feature */
#define	HWF_TX_IP_ID_INCR_ON	0x00200000UL /* Enable Tx IP ID Increment */
#define	HWF_ADV_CSUM_SUPPORT	0x00100000UL /* Sel Csum of IP and TCP/UDP */
#define	HWF_PSM_SUPPORTED	0x00080000UL /* Power State Manager support */
#define	HWF_NEW_FLOW_CONTROL	0x00040000UL /* New Flow-Control support */
#define	HWF_HW_WOL_ENABLE	0x00020000UL /* Enable HW WOL */
#define	HWF_D0_CLK_GAT_ENABLE	0x00010000UL /* Enable D0 Clock Gating */

/* DWORD 1: Deviations */
#define	HWF_WA_DEV_4222		0x18000000UL /* 4.222 (Done Idx rep.) */
#define	HWF_WA_DEV_56		0x14000000UL /* 5.6 (Rx Chksum 0xffff) */
#define	HWF_WA_DEV_54		0x12000000UL /* 5.4 (Missing Status LE) */
#define	HWF_WA_DEV_53		0x11000000UL /* 5.3 (Tx Done LSOv2 rep) */
#define	HWF_WA_DEV_LIM_IPV6_RSS	0x10800000UL /* IPV6 RSS limitted */
#define	HWF_WA_DEV_4217		0x10400000UL /* 4.217 (PCI-E blockage) */
#define	HWF_WA_DEV_4200		0x10200000UL /* 4.200 (D3 Blue Screen) */
#define	HWF_WA_DEV_4185CS	0x10100000UL /* 4.185 (ECU 100 CS cal) */
#define	HWF_WA_DEV_4185		0x10080000UL /* 4.185 (ECU Tx h check) */
#define	HWF_WA_DEV_4167		0x10040000UL /* 4.167 (Rx OvSize Hang) */
#define	HWF_WA_DEV_4152		0x10020000UL /* 4.152 (RSS issue) */
#define	HWF_WA_DEV_4115		0x10010000UL /* 4.115 (Rx MAC FIFO) */
#define	HWF_WA_DEV_4109		0x10008000UL /* 4.109 (BIU hang) */
#define	HWF_WA_DEV_483		0x10004000UL /* 4.83 (Rx TCP wrong) */
#define	HWF_WA_DEV_479		0x10002000UL /* 4.79 (Rx BMU hang II) */
#define	HWF_WA_DEV_472		0x10001000UL /* 4.72 (GPHY2 MDC clk) */
#define	HWF_WA_DEV_463		0x10000800UL /* 4.63 (Rx BMU hang I) */
#define	HWF_WA_DEV_427		0x10000400UL /* 4.27 (Tx Done Rep) */
#define	HWF_WA_DEV_42		0x10000200UL /* 4.2 (pref unit burst) */
#define	HWF_WA_DEV_46		0x10000100UL /* 4.6 (CPU crash II) */
#define	HWF_WA_DEV_43_418	0x10000080UL /* 4.3 & 4.18 (PCI unexp */
					/* compl&Stat BMU deadl) */
#define	HWF_WA_DEV_420		0x10000040UL /* 4.20 (Status BMU ov) */
#define	HWF_WA_DEV_423		0x10000020UL /* 4.23 (TCP Segm Hang) */
#define	HWF_WA_DEV_424		0x10000010UL /* 4.24 (MAC reg overwr) */
#define	HWF_WA_DEV_425		0x10000008UL /* 4.25 (Magic packet */
					/* with odd offset) */
#define	HWF_WA_DEV_428		0x10000004UL /* 4.28 (Poll-U &BigEndi) */
#define	HWF_WA_FIFO_FLUSH_YLA0	0x10000002UL /* dis Rx GMAC FIFO Flush */
					/* for Yu-L Rev. A0 only */
#define	HWF_WA_COMA_MODE	0x10000001UL /* Coma Mode WA req */

/* DWORD 2: Deviations */
#define	HWF_WA_DEV_548		0x20000800UL /* 5.48 (IPv4 Header CS) */
#define	HWF_WA_DEV_4216		0x20000400UL /* 4.216 (fragm. IPV4+RSS) */
#define	HWF_WA_DEV_519		0x20000200UL /* 5.19 (MACsec: unexp. LE) */
#define	HWF_WA_DEV_517		0x20000100UL /* 5.17 (MACsec+FlowThrough) */
#define	HWF_WA_DEV_515		0x20000080UL /* 5.15 (MACsec TX underr) */
#define	HWF_WA_DEV_542		0x20000040UL /* 5.42 (CPU CLK + Flash) */
#define	HWF_WA_DEV_4229		0x20000020UL /* 4.229 (RSS + VLAN) */
#define	HWF_WA_DEV_521		0x20000010UL /* 5.21 (wrong RFSW) */
#define	HWF_WA_DEV_520		0x20000008UL /* 5.20 (Tx lost of data) */
#define	HWF_WA_DEV_511		0x20000004UL /* 5.11 (Tx Underrun) */
#define	HWF_WA_DEV_510		0x20000002UL /* 5.10 (Tx Checksum) */
#define	HWF_WA_DEV_51		0x20000001UL /* 5.1 (MACSec sync) */

#endif /* _YGE_H */