13890 Some manual pages miss spaces next to formatting

Reviewed by: Andy Fiddaman <andy@omnios.org>
Approved by: Richard Lowe <richlowe@richlowe.net>

1 files changed, 4 insertions, 21 deletions

diff --git a/usr/src/man/man1m/lpadmin.1m b/usr/src/man/man1m/lpadmin.1m
index c509eafe2e..006d0994cf 100644
--- a/usr/src/man/man1m/lpadmin.1m
+++ b/usr/src/man/man1m/lpadmin.1m
@@ -3,11 +3,10 @@
 .\" The contents of this file are subject to the terms of the Common Development and Distribution License (the "License").  You may not use this file except in compliance with the License.
 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE or http://www.opensolaris.org/os/licensing.  See the License for the specific language governing permissions and limitations under the License.
 .\" When distributing Covered Code, include this CDDL HEADER in each file and include the License file at usr/src/OPENSOLARIS.LICENSE.  If applicable, add the following below this CDDL HEADER, with the fields enclosed by brackets "[]" replaced with your own identifying information: Portions Copyright [yyyy] [name of copyright owner]
-.TH LPADMIN 1M "May 13, 2017"
+.TH LPADMIN 1M "June 20, 2021"
 .SH NAME
 lpadmin \- configure the LP print service
 .SH SYNOPSIS
-.LP
 .nf
 \fBlpadmin\fR \fB-p\fR \fIprinter\fR {\fIoptions\fR}
 .fi
@@ -29,13 +28,11 @@ lpadmin \- configure the LP print service
 .fi
 
 .SH DESCRIPTION
-.LP
 \fBlpadmin\fR configures the LP print service by defining printers and devices.
 It is used to add and change printers, to remove printers from service, to set
 or change the system default destination, to define alerts for printer faults,
 and to mount print wheels.
 .SH OPTIONS
-.LP
 The \fBlpadmin\fR command has options for:
 .RS +4
 .TP
@@ -81,7 +78,6 @@ one,two,three
 .in -2
 
 .SS "Adding or Changing a Printer"
-.LP
 The first form of the \fBlpadmin\fR command (\fBlpadmin\fR \fB-p\fR
 \fIprinter\fR {\fIoptions\fR}) configures a new printer or changes the
 configuration of an existing printer. It also starts the print scheduler.
@@ -687,7 +683,7 @@ are generally of the format:
 
 In either case, \fIserver\fR specifies the hostname or IP address of the remote
 print server, \fIqueue\fR specifies the name of the print queue on the remote
-print server, and the optional \fB#Solaris\fRspecifies that the remote print
+print server, and the optional \fB#Solaris\fR specifies that the remote print
 server is a Solaris server when \fBlpd\fR URI format is being used.
 .sp
 For example:
@@ -714,7 +710,7 @@ In an environment where the nodename is variable, print queues are invalidated
 when the nodename changes. Using \fBlocalhost\fR as the \fIsystem-name\fR
 allows print queues to be maintained across changing nodenames. The
 \fIsystem-name\fR, as used by the print service, is only set to \fBlocalhost\fR
-when explicitely set with this option; by default, \fBlpadmin\fR sets
+when explicitly set with this option; by default, \fBlpadmin\fR sets
 \fIsystem-name\fR to \fInodename\fR. For example, if you want to configure a
 new printer on the local system, and want it called \fIprinter3\fR:
 .sp
@@ -893,7 +889,6 @@ See the \fBsmbspool\fR man page for details.
 .RE
 
 .SS "Removing a Printer Destination"
-.LP
 The \fB-x\fR \fIdest\fR option removes the destination \fIdest\fR (a printer or
 a class), from the \fBLP\fR print service. If \fIdest\fR is a printer and is
 the only member of a class, then the class is deleted, too. If \fIdest\fR is
@@ -903,7 +898,6 @@ local printers and the scheduler is still running, the scheduler is shut down.
 .LP
 No other \fIoptions\fR are allowed with \fB-x\fR.
 .SS "Setting/Changing the System Default Destination"
-.LP
 The \fB-d\fR [\fIdest\fR] option makes \fIdest\fR (an existing printer or
 class) the new system default destination. If \fIdest\fR is not supplied, then
 there is no system default destination. No other \fIoptions\fR are allowed with
@@ -952,7 +946,7 @@ terminals, one is arbitrarily chosen.
 Do not send messages for the current condition. An administrator can use this
 option to temporarily stop receiving further messages about a known problem.
 Once the \fIprint-wheel\fR has been mounted and subsequently unmounted,
-messages are sent againwhen the number of print requests reaches the threshold
+messages are sent again when the number of print requests reaches the threshold
 specified by the \fB-Q\fR option.
 .RE
 
@@ -1029,14 +1023,12 @@ anyone submits a print request for the print wheel when it is not mounted.
 .RE
 
 .SH PREDEFINED OPTIONS USED WITH THE \fB-o\fR OPTION
-.LP
 A number of options, described below, are predefined for use with \fB-o\fR.
 These options are used for adjusting printer capabilities, adjusting printer
 port characteristics, configuring network printers, and controlling the use of
 banner. The \fB-o\fR also supports an arbitrary \fB\fIkeyword\fR=\fIvalue\fR\fR
 format, which is referred to below as an undefined option.
 .SS "Adjusting Printer Capabilities"
-.LP
 The \fBlength\fR, \fBwidth\fR, \fBcpi\fR, and \fBlpi\fR parameters can be used
 in conjunction with the \fB-o\fR option to adjust printer capabilities. The
 format of the parameters and their values is as follows:
@@ -1082,7 +1074,6 @@ lpadmin -p \fIprintername\fR -o lpi=\fR
 .sp
 
 .SS "Adjusting Printer Port Characteristics"
-.LP
 You use the \fBstty\fR keyword in conjunction with the o option to adjust
 printer port characteristics. The general form of the \fBstty\fR portion of the
 command is:
@@ -1126,7 +1117,6 @@ The default can be reset by:
 .sp
 
 .SS "Configuring Network Printers"
-.LP
 The \fBdest\fR, \fBprotocol\fR, \fBbsdctrl\fR, and \fBtimeout\fR parameters are
 used in conjunction with the \fB-o\fR option to configure network printers. The
 format of these keywords and their assigned values is as follows:
@@ -1169,7 +1159,6 @@ lpadmin -p \fIprintername\fR -o timeout=
 .sp
 
 .SS "Controlling the Use of the Banner Page"
-.LP
 Use the following commands to control the use of the banner page:
 .sp
 .in +2
@@ -1200,7 +1189,6 @@ The fourth command (\fB-o\fR \fBbanner=never\fR) causes a banner page never to
 be printed, even if a user specifies \fBlp\fR \fB-o\fR \fBbanner\fR. The root
 user can override this command.
 .SS "Undefined Options"
-.LP
 The \fB-o\fR option supports the use of arbitrary, user-defined options with
 the following format:
 .sp
@@ -1237,7 +1225,6 @@ Sets boolean values \fBfoo=true | foo=false\fR.
 .RE
 
 .SH EXAMPLES
-.LP
 In the following examples, \fIprtr\fR can be any name up to 14 characters and
 can be the same name as the \fBping\fR(1M) name.
 .LP
@@ -1278,7 +1265,6 @@ example# \fBaccept \fIprtr\fR\fR
 .sp
 
 .SH EXIT STATUS
-.LP
 The following exit values are returned:
 .sp
 .ne 2
@@ -1335,7 +1321,6 @@ System printer configuration database
 .RE
 
 .SH ATTRIBUTES
-.LP
 See \fBattributes\fR(5) for descriptions of the following attributes:
 .sp
 
@@ -1350,7 +1335,6 @@ Interface Stability	Obsolete
 .TE
 
 .SH SEE ALSO
-.LP
 \fBenable\fR(1), \fBlp\fR(1), \fBlpstat\fR(1), \fBmail\fR(1), \fBstty\fR(1),
 \fBaccept\fR(1M), \fBlpforms\fR(1M), \fBlpsched\fR(1M), \fBlpsystem\fR(1M),
 \fBping\fR(1M), \fBdial\fR(3NSL), \fBterminfo\fR(4), \fBattributes\fR(5)
@@ -1358,7 +1342,6 @@ Interface Stability	Obsolete
 .LP
 \fI\fR
 .SH NOTES
-.LP
 When using lpadmin to provide access to a remote printer, remote configuration
 data is stored in \fB/etc/printers.conf\fR. This data includes a \fBbsdaddr\fR
 and a \fBprinter-uri-supported\fR attribute. The data in this file can be